AM26 Artiglio Master BLUE LIGHT

AM26 Artiglio Master BLUE LIGHT segui Corghi - follow Corghi

AM26 Artiglio Master AM50 Artiglio 50 The first leverless tire changer and still the best 2nd generation leverless tire changer High Performances Up to 30 Rims ARTIGLIO MASTER marks a new frontier in the world of tire changers because it eliminates the lever, physical effort, and the precaution and worry about damaging expensive wheels and tires. The unit s operation is based on a completely new principle, including electronic wheel diameter selection with automatic tool positioning, wheel lifter for loading and unloading the wheel and automatic tool head for leverless mounting/demounting. Features Automatic mount/demount Computerized system Push-button technology 12 to 26 rim diameter No pry bars or tire tools No damage to wheels, tires, operator Pneumatic wheel lift Rim Diameter 12-26 Rim Width 15 Tire Diameter 43 * Voltage 110V 1 Ph Amp Draw 20 amps Air Pressure 150 psi Shipping Weight 1215 lbs *Note: Rim diameter can offset max. tire diameter. Representing over 50 years of tire changer evolution, the Corghi ARTIGLIO 50 is the latest in tire changer technology. The innovative design of the 50 allows it to easily handle the oughest tire and wheel combinations on the market today. Features Sturdy pneumatic locking swing-arm design enables the machine to be close to the wall. Powerful two-speed transmission for both precision and speed. Exclusive slowstart first revolution when fast speed is engaged allows the tire to slip into the drop-center, eliminating the binding that tears beads. Precision bead breaker disk gently loosens both beads. An all-new bead lifter eliminates the need for a tire bar, reducing operator risk and torn beads - another Corghi exclusive. Center cone clamping with plastic protector means no metal touches the face of the rim at any time. Handles tires 12 to 30, including UHP, run-flat and low-profile tires PAX capable with optional adaptors. Rim Diameter 12-30 Maximum Tire Diameter 47 Maximum Tire Width 15 Maximum Wheel Lift Weight 187 lbs Power 110V, 20 amp,120psi Shipping Weight 776 lbs LIMITED WARRANTY 1 Year Parts 6 Months Labor LIMITED WARRANTY 1 Year Parts 6 Months Labor 2

AM500 Artiglio 500 the new automatic tire changer with 2nd generation Leva la leva (Without lever). Technology for vehicle, SUV and commercial vehicles wheels up to 32. A natural evolution of Artiglio 50, this new tire changer maintains its best qualities and also presents many technical innovations: dynamic bead breaking device with a dual bead breaker disc, newly designed head group, more performing wheel support plate clamping, reinforced structure, great attention to ergonomics and control availability. All of this means a faster operating speed without risks to the operator and the rims, even during the most critical phases, great simplicity of use and universality, for equipment whose features can be used 100%. Features wheel dimension range Dynamic bead breaking device with dual specular bead breaker disc. The multifunctional control console contains all the operating controls. Ideal for dynamic bead breaking and for rim and tire match mounting, thanks to the two dual control discs. Motoinverter drive system. A wheel lifter is fitted as standard, for effortlessly placing wheels of any type onto the turntable. The demounting procedure uses the same working movements but absolutely no effort is required from the operator thanks to the Leva la leva (Without lever) technology incorporated in the head (Patent Pending) Safe and universal wheel clamping Rim diameter Maximum tire diameter Maximum tire width with Tire types processed 12-32 47 15 (from wheel supporting base) conventional, Low Profile and Run Flat turntable Clamping Drive system Rotation torque Rotation speed mechanical-manual 2-speed motoinverter 1100 Nm 7-18 rpm bead breaker Maximum bead breaking range Bead breaker stroke Bead breaker force 26,4 21,2 1710 lbf wheel loading/unloading Operation Maximum wheel weight pneumatic 187,4 lbs power supply LIMITED WARRANTY 1 Year Parts 6 Months Labor 3 electric 1Ph electric 1Ph (alternative) Pneumatic operating pressure Shipping weight 230V-0.98 kw 50Hz/60 Hz 110V-0,98 kw 50Hz/60 Hz 116 PSI (minimum) 992 lbs

A2024TI A2024TI-20 CARS, LIGHT TRUCK TIRE CHANGERS The market choice for reliability and long-lasting performance is designed for lowprofile/ultra-high performance tires. Run-flat certified by all major tire manufacturers. PAX capable with accessory kit. Features Built-in table inflator with jets in the jaws. Unique mount/demount head does not touch the rim during operation. Locking handle locks head away from the rim. Powerful action bead-breaker blade follows bead to inside rim contour. Heavy-duty turntable rotates in either direction. Rebuildable stainless steel cylinders. Heavy-duty stainless steel turntable. Safe, fast, profitable and affordable. Pneumatic-locking mount/demount head. Sturdy tilt-back tower. Tire pressure sensor style rims changes safely. Interchangeable locking peaks on jaws. Table top rotation double-speed RPM 6-16. Shipping weight 573 lbs. Also available with air motor. LIMITED WARRANTY 10 Years on Transmission 1 Year on Parts and Labor standard accessories Lube Bucket Lube Brush Tire Lever M/D Head Bottom Inserts Set of Jaw Protectors B/B Blade Protector Bead Clip Set of Inserts Tire Lever Cover 4 Same features as the A2024TI PLUS SP2000 SUPER POWER UNIT Pneumatic-powered upper disc holds bead into the wheel drop for mounting Designed for low-profile, EMT and high-performance tires and wheels Loosening upper bead for demounting Push down upper bead for lubrication and tire tool insertion Lowering upper bead for inspection between bead and demount head Lowering upper bead for inserting the bead clamp; this clamp makes it possible to lift the bead over the mount/demount head Shipping weight 815 lbs. Ext. Rim Size 10-24 Optional w/adapter 8-26 Int. Rim Size 13-26 Voltage 110V 1 Ph Rim Width 2-15 Max. Tire Diameter 43 Air Pressure Bead Breaker Power @ Shoe Torque 150 psi 3500 lbs 737 ft/lbs

A2024TI-2015 A2024TI-20BPT Same features as the A2024TI PLUS SP2000 SUPER POWER UNIT + PLUS PU1500 POWER ASSIST UNIT Pneumatic powered Wheel and bead pressing arm Bead lifter Maintains bead in drop center Eliminates bead stress Eliminates wheel damage One person operation to change even the most difficult tires PAX capable with PAX kit Rim clamping assist Shipping weight 1080 lbs. Same features as the A2024TI + PLUS SP2000 SUPER POWER UNIT + PLUS PNEUMATIC BEAD PRESSING TOOL WITH SUPPORT (BPT) Professional pneumatic devices for easy demounting and mounting operation of lowprofile and Run Flat tires. Shipping weight 882 lbs. LIMITED WARRANTY 10 Years on Transmission 1 Year on Parts and Labor standard accessories Lube Bucket Lube Brush Tire Lever M/D Head Bottom Inserts Set of Jaw Protectors B/B Blade Protector Bead Clip Set of Inserts Tire Lever Cover Ext. Rim Size 10-24 Optional w/adapter 8-26 Int. Rim Size 13-26 Voltage 110V 1 Ph Rim Width 2-15 Max. Tire Diameter 43 Air Pressure Bead Breaker Power @ Shoe Torque 150 psi 3500 lbs 737 ft/lbs 5

A9824TI A9824TI-1500 series passenger, LIGHT TRUCK TIRE CHANGERS Superior quality teamed with a sleek design and other unique features allow this machine to achieve speeds up to 50% faster than any other tire changer on the market in its price range. That s why Corghi was awarded ISO 9001 Quality Certification, industry s most coveted award. Run-flat certified by all major tire manufacturers. Features Built-in table inflator with jets in the jaws. Unique mount/demount head does not touch the rim during operation. Locking handle locks head away from the rim. Powerful action bead-breaker blade follows bead to inside rim contour. Heavy-duty turntable rotates in either direction. Rebuildable stainless steel cylinders. Heavy-duty stainless steel turntable. Safe, fast, profitable and affordable. Bead-pressing lever. Upper arm assembly swings out-of-way. Shipping weight 608 lbs. Also available with air motor. Same features as the A9824TI PLUS PU1500 POWER ASSIST UNIT Pneumatic powered Wheel and bead pressing arm Bead lifter Maintains bead in drop center Eliminates bead stress Eliminates wheel damage One person operation to change even the most difficult tires PAX capable with PAX kit Rim clamping assist Shipping weight 829 lbs. LIMITED WARRANTY 10 Years on Transmission 1 Year on Parts and Labor standard accessories Lube Bucket Lube Brush Tire Lever Tire Lever Covers Set of Jaw Protectors M/D Head Bottom Inserts Set of Inserts Air Tank Gauge Assembly B/B Blade Protector on Machine Bead Pressing Lever on Machine 6 Ext. Rim Size 10-24 Optional w/adapter 8-28 Int. Rim Size 13-26 Voltage 110V 1 Ph or Air Rim Width 3.5-14 Max. Tire Diameter 47 Air Pressure 150 psi Bead Breaker Power @ Shoe 3500 lbs Torque 737 ft/lbs

A9220TI A9220TI-1500 series passenger, LIGHT TRUCK TIRE CHANGERS Our economy tire changers are designed to supply maximum and outstanding performance at very competitive prices. State-of-the-art technology and high-quality mechanical components provide the reliability and userfriendliness that is the Corghi trademark. This tire changer with its simple, attractive design is easy to use and guarantees top performance, even in the most demanding applications. Add our PU1500 Power Assist Unit and you have unmatched capability in its class. Features Built-in table inflator with jets in the jaws. Unique mount/demount head does not touch the rim during operation. Locking handle locks head away from the rim. Powerful action bead-breaker blade follows bead to inside rim contour. Heavy-duty turntable rotates in either direction. Rebuildable stainless steel cylinders. Heavy-duty stainless steel turntable. Safe, fast, profitable and affordable. Upper arm assembly swings out-of-way. Shipping weight 540 lbs. Also available with air motor. Same features as the A9220TI PLUS PU1500 POWER ASSIST UNIT PU1500 power assist unit Pneumatic powered Wheel and bead pressing arm Bead lifter Maintains bead in drop center Eliminates bead stress Eliminates wheel damage One-person operation to change even the most difficult tires Rim clamping assist Shipping weight 760 lbs. LIMITED WARRANTY 5 Years on Transmission 1 Year on Parts and Labor standard accessories Lube Bucket Lube Brush Tire Lever Air Tank Gauge Assembly Set of Jaw Protectors M/D Head Bottom Inserts Set of Inserts B/B Blade Protector Rim Clamping External 10-20 Optional w/adapter 8-24 Internal 13-23 Voltage 110V 1 Ph or Air Rim Width 3.5-12.5 Max. Tire Diameter 42 Air Pressure 150 psi Bead Breaker Power @ Shoe 3500 lbs Torque 737 ft/lbs 7

E LI G p d U HT BL BLUE LIGHT wer e o the first high technology and fully interactive wheel balancer. Blue Light s complete technical development was achieved with the goal of maximising functionality while offering maximum simplicity of use. Using a videocamera and advanced artificial vision technologies, the processing unit identifies the balancing planes, displaying them on a high definition touch screen monitor. At the same time, it prepares the measurement sensors and provides the user with an absolutely intuitive and completely automatic procedure. The adjustable display/weight holder unit and the oblique opening of the wheel guard ensure maximum ergonomics and make positioning possible also in tight spaces. Features High resolution touch-screen monitor Wheel data acquisition with automatic laser triangulators Image/data processing thanks to a personal computer multiprocessor Rim lighting for acquiring images ith the blue light system Rim display and image acquisition with videocameras Automatic weight position search Automatic wheel clamping with ELS shaft assembly Radial and lateral run-out measurement Side slip measurement Laser pointer to indicate weight position Weight Management (Integrated Software Suite) Voltage Rim diameter Maximum wheel diameter Maximum wheel width with guard Maximum wheel weight Rotation speed Shipping weight switching power supply 100-230V 50-60Hz 10-32 44 600 mm 165 lbs 70-85-98 rpm 736 lbs. Basic Automotive Accessory Group Standard with EM Balancers LIMITED WARRANTY 1 Year Parts and Labor 2 Years on PC Boards Conical Spring Rubber Guard for Alloy Wheels Wheel Attaching Cap Spacer Cap Small Cone 1,6-2,7 Medium Cone 2,6-3,4 8 Large Cone 3,3-4 Quick-Release Speed Nut Wheel Weight Hammer Calibration Weight/3.5 oz Tire Caliper

EM8570 QL-RR EM8540 EM430 Features Features Features Automatic data entry, hidden weight and aluminum wheel program with precision weight placement Corghi s quick-lock pneumatic clamping, optimization and custom programs save time and money New sonar-driven radial runout allows 100% of assemblies to be checked without significant time sacrifice Operation and help screens in multiple languages. Weight Management (Integrated Software Suite) Voltage Tire Diameter Rim Width Rim Diameter Spin Time Balance Speed Shaft Diameter Max. Tire Weight Shipping weight 110/208V 1 Ph Up to 36 1.5-20 1-30 5.5 sec. 60-120 rpm 40 mm 160 lbs. 640 lbs. Split weight program Automatic data entry Hidden weight program 10 Alu balancing programs Precision weight placement Customizing programs Multiple operator programs Automatic weight position search Optimization, quick and easy, minimizes weight use Optional Quick-Lock for pneumatic clamping Automatic calibration Quick-release speed nut Voltage Tire Diameter Rim Width Rim Diameter Spin Time Balance Speed Shaft Diameter Max. Tire Weight Shipping weight 110/208V 1 Ph Up to 36 1.5-20 1-30 5.5 sec 60-120 rpm 40 mm 160 lbs 560 lbs Large LCD display Wide cabinet on three legs Wheel guard up to 44 Automatic data entry for distance and diameter High performance Accurate - 1 gram Self-calibration Shift plane capability Reliable Quick-release speed nut Voltage Tire Diameter Rim Width Rim Diameter Spin Time Shaft Diameter Max. Tire Weight Shipping weight 110V 1 Ph Up to 35 1.5-20 1-23 9 sec. 40 mm 144 lbs. 330 lbs. Basic Automotive Accessory Group Standard with EM Balancers LIMITED WARRANTY 1 Year Parts and Labor 2 Years on PC Boards Conical Spring Rubber Guard for Alloy Wheels Wheel Attaching Cap Spacer Cap 9 Small Cone 1,6-2,7 Medium Cone 2,6-3,4 Large Cone 3,3-4 Quick-Release Speed Nut Wheel Weight Hammer Calibration Weight/3.5 oz Tire Caliper

MONSTER AG TT A monster of performance for industrial tire professionals. Together with the best of cutting edge technologies, Monster AG TT also integrates all the features that make it a fundamental and irreplaceable tool for the working quality and safety of industrial tire operators. Outstanding advantages in 5 strongholds: Significant reduction in strain High protection of rims and tires High performance Maximum safety Absolutely universal application The S.T.S. device (Side To Side) enables the automatic switching of the tool block from one side of the tire to the other. Thanks to Monster AG TT, the profession of tire specialists now changes substantially, guaranteeing technicians and their customers an additionally efficient, rapid and top quality service. Super automatic tyre changer with Leva la Leva system SMART Corghi System Voltage 220V 3 Ph Shipping Weight 3000 lbs Rotation speed 3 speed 1 3,5 7,8 RPM Maximum rotation torque 4059 ft/lbs (5500 Nm) Locking unit 4 tilted jaws (patented) Locking capacity from 14 to 58 Locking positions 9 Maximum locking force 9000 lbf (40000 N) Maximum hydraulic pressure 2610 PSI (180 bar) Maximum tire diameter 98,4 (2500 mm) Maximum tire width 63 (1600 mm) Maximum wheel weight 3747,8 lbs (1700 kg) Minimum wheel centre hole Ø 3,5 (90 mm) Minimum working height to chuck shaft 17,7 (450 mm) LIMITED WARRANTY 1 Year Parts 6 Months Labor standard accessories Rim Pliers Bead Lifting Lever Side Ring Lever Grease Gun 10

AG52L HD1200 Tire Diameter 87 Tire Width 39 Voltage 220V 3 Ph Rim Range 11-52 Shipping Weight 2094 lbs Tire Diameter 98 Tire Width 48 Voltage 220V 3 Ph Rim Range 11-56 Shipping Weight 2866 lbs LIMITED WARRANTY 1 Year Parts 6 Months Labor standard accessories Rim Pliers Lubricator 36-52 Extension (set of 4) Tire Lever Aluminum Bar Lever ET66 WL Tire Diameter 52 Rim Width 4-20 Rim Diameter 12-28 Max. Tire Weight Spin Time Trucks Voltage Shaft Shipping Weight LIMITED WARRANTY 6 Months Labor. 1 Year Parts. 2 Years on PC Boards 11 440 lbs 17 sec 110V 1Ph 46 mm 441 lbs standard accessories Spacer Flange Medium Cone 106-202 mm Large Cone 220-281 mm Wing Nut Tire Caliper Calibration Weight (3.5 oz) Calibration Weight (10 oz) Wheel Weight Pliers Attaching Bolt (requires 2) Calibration Cone

IC 90 FEATURES Steel cage assures maximum safety, even in the event of tire blowout or rim breakage, because it allows inflation to take place only once the wheel is inside the cage. Cage is equipped with a T.I. fast bead setting mechanism with adjustable air jet diameter. Roller way positioned at a height of 28 makes the operation quicker and easier Rim Inflation Capacity 12-20 Maximum Wheel Width 14 Maximum Wheel Diameter 36 Maximum Wheel Weight 175 lbs Wheel Hub Diameter 43-164 mm Working Pressure 145 psi Dimensions 45 l x 91 w x 59 h Shipping Weight 342 lbs Corghi Power Assist Units and PAX Accessory Kits Designed for low-profile run-flat and high-performance tires. Eliminates wheel and tire bead damage and allows a single operator to change even the most difficult tires. Fits Corghi models A2010TI, A2019TI and A2024TI. See catalog page 4 for features and. SP2000 Adapter Kit Models A2019TI and A2024TI Produced until March 1999 (ex. S/B 903) Code 244644A No. 900244644 Produced from April 1999-April 2004 Code 245415A No. 801245415 Produced from April 2004-May 2004 Code 100026A No. 8-11100026 PU1500 Power Assist Unit Allows one operator to change even the most difficult tires on Corghi swing arm/tilt back machines. Provides PAX capability when used with PAX kit. No. 900244644 Models A9220TI, A9824TI and A2024TI. (Contact Corghi for older models). Complete unit consists of No. 8-11100027, No. 8-11100030 and No. 8-11100031. PAX Kit No. 8-11100012 PSR (PAX Support Ring) Portable Extractor No. 8-11100079 12

EXACT 700 coming soon! RADIO DATA TRANSMISSION 1 ~ / 115-230 V / 50-60 Hz 8 CCD-sensor, computerised wheel aligner. Main unit: wheeled cabinet with universal LCD monitor holder and printer drawer, worktop for mouse and documents, professional PC with DVD player, Windows XP Embedded, 102key keypad, mouse, steering wheel holder, brake pedal depressor and user manual. Set of 4 measuring heads with 8 CCD sensors and 8 electronic inclinometers. Wireless data transmission by means of an industrial radio with SSPP 2.4GHz technology. Removable batteries. Issued with 2 battery sets and stand alone battery charger for heavy and continuous work loads. Emergency cables included. Measuring sensors pre-set for use with electronic turntable. EXACT ALIGNMENT PRO 32 bit wheel alignment software including fixed slide for vehicle adjustment, and toe curve procedures. Ready for animation for vehicle adjustment, OnLine alignment Specs, RH meter, Romess and Asa Network. Ready for truck, bus and trailer database and procedures. IR remote control ON REQUEST Total toe Half toe Camber Caster King-pin Set back ± 48 ± 24 ± 10 ± 30 ± 30 ± 22 Thrust angle Steering angle Main unit consumption Sensor head Dimensions (width x depth x height) with sensors ± 22 ± 22 0, 4 kw 800x135x210 mm 610x610x1650 mm 1350x1010x1650 mm 1650 1350 1 0 10 Pit Parallelogram lift Car Trucks and trailers Scissor lift 4 post lift Van Bus Legenda 13

EXACT 70 CORGHI EXACT 70 CAR MAKER coming soon! RADIO DATA TRANSMISSION 1 ~ / 115-230 V / 50-60 Hz 8 CCD-sensor, computerised wheel aligner. Main unit: wheeled cabinet with printer protected lodging, worktop for documents, professional PC with DVD player, Windows XP Embedded, 102-key keypad, steering wheel holder, brake pedal depressor and user manual. Set of 4 measuring heads with 8 CCD sensors and 8 electronic inclinometers. Wireless data transmission by means of an industrial radio with SSPP 2.4GHz technology. Internal batteries, battery charger on cabinet. Emergency cables included. (radio version only) Measuring sensors pre-set for use with electronic turntable. (Car Maker version only) EXACT ALIGNMENT PRO 32 bit wheel alignment software including toe curve procedures. Ready for animation or fixed slide for vehicle adjustment, OnLine alignment Specs, RH meter, Romess and Asa Network. Ready for truck, bus and trailer database and procedures. IR remote control, mouse and universal LCD monitor holder ON REQUEST Total toe Half toe Camber Caster King-pin Set back ± 48 ± 24 ± 10 ± 30 ± 30 ± 22 Thrust angle Steering angle Main unit consumption Sensor head Dimensions (width x depth x height) with sensors ± 22 ± 22 0, 4 kw 800x135x210 mm 800x630x1710 mm 1350x1320x1710 mm 1350 1350 ATTENTION The highlighted icons only indicate pre-sets or uses subjected to restrictions. Carefully read the notes in the price list or the catalogue. 14 131 23020 1710 1710

Artiglio Master Standard & Optional standard A) Mini Cone (2 ) No. 462414B B) Small Cone (3 ) No. 462415A C) Universal Cone (4.7 ) Until production Dec/2004 No. 900263161 D) Universal Cone (4.7 ) Starting production Jan/2005 (S/N CAN021164) No. 4-102353A E) Plastic Cone Cover No. 461668C F) Medium Cone (5.7 ) No. 4-102346 G) Large Cone (7.3 ) No. 461667E H) Light Truck Spacer Until production Dec/2004 No. 361896A I) Light Truck Kit Spacer Ring No. 9005-100690 Starting production Jan/2005 (S/N CAN021164) No. 8-11100037 J) Plastic Reverse Mount Plate Until production Dec/2004 No. 462098A K) Paper Covers for Reverse Mount Plate Until production Dec/2004 No. 462825 L) Universal Locking Pistol Until production Dec/2004 No. 5-100512A M) Locking Pistol Starting production Jan/2005 (S/N CAN021164) No. 5-100683C N) Spacer No. 263436A O) Drop Center Tool No. 801262417 P) Sliding Bead Pressing Clamp No. 8-11100120 Q) Plastic Insert for M/D Head No. 461489A R) Inflation Kit No. 801260961 A. B. C. D. E. F. G. H. I. J. K. L. M. N. O. optional A) Bead Clamp No. 801435685 B) Pax System Kit (24 or 26 ) No. 801260860 For 24 Converted to 26 No. 8-11100021 C) Wire Wheel Adapter Wire Wheel Plate No. 8-11100009 D) Universal Lug Adapter Until production Dec/2004 No. 801263085 Starting production Jan/2005 (S/N CAN021164) No. 8-11100038 E) Reverse Mount Adapter Until production Dec/2004 No. 801263419 Starting production Jan/2005 (S/N CAN021164) No. 8-11100073 F) Spacer Set for Reverse Adapter No. 8-11100046 extended thumbscrew No. 9004-102566 G) Articulating Arm No. 801263408 P. A. B. C. D. E. F. G. Note: Because of ongoing product improvements, it is necessary to have the model and serial number available when inquiring about accessories or placing an order. 15

Artiglio 50 Standard & Optional standard A) Universal Locking Pistol No. 5-101197A B) Extension for Locking Pistol No. 5-102722 C) Cone (2.28 ) No. 4-103235C D) Cone (2.95 ) No. 4-103234B E) Protection Cap for Cone (4.72 ) No. 4-103232A F) Cone (4.72 ) No. 4-103230B G) Cone (5.71 ) No. 4-103229A H) Bead Pressing Clamp for Run-Flat Tires No. 801262417 I) Sliding Bead Pressing Clamp No. 8-11100120 J) Universal Grease Bucket Holder No. 5-101236 K) Manual Help Tool No. 4-105142A L) Pickup Rim Kit No. 8-11100086 Cone (7.36 ) No. 4-103233A Spacer Ring No. 9005-100690 M) Mount/Demount Head Inserts (Not Pictured) No. 4-103502B N) Plastic Protections Kit No. 5-102468 A. B. C. D. E. F. G. H I. J. optional K. L. A) Wire Wheel Plate No. 8-11100009 B) Reverse Wheel Flange No. 8-11100073 Thumbscrew No. 4-102377 Pin w/hole No. 463842 Pin No. 463842 Universal Flange No. 5-102422 Caliper No. 441286 C) Extension Kit for Reverse & Closed Wheel (To be used w/accessory 8-11100039) No. 8-11100046 D) Long Ring Nut No. 4-102566 E) Universal Flange for Close Center Rims No. 8-11100087 Rim Fixing Screw No. 361647A Rim Fixing Rim Nut No. 361648A Center Shaft No. 4-103765 Connecting Rod No. 4-100014 Universal Flange No. 5-102422 Caliper No. 441286 F) Articulating Arm No. 8-11100097 G) PAX Kit No. 8-11100118 A. C. D. B. E. Note: Because of ongoing product improvements, it is necessary to have the model and serial number available when inquiring about accessories or placing an order. F. G. 16

Optional Tire Changer Accessories/Spare Parts A) 8-24 Wheel Adapters No. 801263518 9820 before 010110483 9212 before 010111235 2019 before 9031389 2010 before 9041149 B) 8-24 Wheel Adapters No. 801263517 9820 after 010110483 9212 after 010111235 9220 9824 (Up to 28 wheel) 2019 after 9031389 2010 after 9041149 MTS24 MTS40 *including these serial numbers C) Offset hex shaft for 8-24 adapters No. 801263548 *for 2019 and 2024(excludes mount/ demount head). D) Offset hex shaft for 8-24 adapters No. 8-11100015 for MTS series (excludes mount/demount head). E) Plastic Jaw Protectors/Alloy Rim No. 900442728 9820 before 010110483 9212 before 010111235 2019 before 9031389 2010 before 9041149 *set of 4 F) Plastic Jaw Protectors/Alloy Rim No. 8-11100108 9820 after 010110483 9212 after 010111235 9220 9824 2019 after 9031389 2010 after 9041149 2024/MTS40 *including these serial numbers *set of 12 G) Plastic Jaw Protector(Cover Teeth) No. 8-11100109 9820 after 010110483 9212 after 010111235 2019 after 9031389 2010 after 9041149 9220 9824 2024 *including these serial numbers *set of 12 H) Bead Breaker Blade Protector No. 8-11100105 S/N 000900000 and after (set of 6) I) Bead Clamp No. 801435685 J) Bead Clamp Contoured Wheels No. 801261910 K) Mount/Demount Head (all models) No. 258458 L) Plastic Inserts for Mount/Demount Head No. 8-11100106 (Set of 10) M) Plastic Tire Lever Covers (6) No. 8-11100104 N) Plastic Mount/Demount Head No. 801250309 (Complete Assembly) O) Plastic Mount/Demount Head No. 450310 (Replacement Part) P) Bead Depressing Lever No. 801242834 (9419/9820/9824/9826) Q) WL60 Pneumatic Wheel Lift No. 8-11600004 17 A. B. C. D. E. F. G. H. I. J. K. L. M. N. O. P. Q.

Optional Tire Changer Accessories/Spare Parts motorcycle applications A) M/C Bead Breaker Blade No. 801260402 B) M/C Adapter (set of 4) No. 900251726 9212 before S/N: 010111235 9820 before S/N: 010110483 2019 before S/N: 9031389 2010 before S/N: 9041149 C) M/C Adapter (set of 4) No. 801258650 9212 after S/N: 010111235 2019 after S/N: 9031389 2010 after S/N: 9041149 9820 after S/N: 010110483 9824 MTS24 MTS40 emt/run flat application A) SP2000 Rotary Bead Presser No. 801255567 2019/Artiglio-10 B) SP2000 Mounting Kit A2019 before S/N: 9031389 No. 900244644 A2019 after S/N: 9031389 No. 801245415 A2010 before S/N: 9041149 No. 900244644 A2010 after S/N: 9041149 No. 801245415 Mounting Kit for after May/05 production No. 8-11100026 models 9220, 2024, 9824 A) Lube Bucket No. 432825 B) Lube Brush No. 415248 C) Tire Lever No. 444238 D) Tire Lever Cover (6) No. 8-11100104 E) Set of Jaw Protectors (12) No. 8-11100108 F) M/D Head Bottom Inserts (5) No. 8-11100107 G) Set of Inserts (10) No. 8-11100106 H) Bead Clip (2024 Only) No. 801435685 I) Jaw Protector for Teeth (12) No. 8-11100109 J) B/B Blade Protector (6) No. 8-11100105 K) Bead Pressing Lever* on Machine 9824 only. No. 801242834 GENERAL ACCESSORY APPLICATION A) Long Rim Clamp No. 801224201 B) Aluminum Clamp (All Truck Units) No. 801227195 C) Alloy Rim Clamps (Set of 4) for serial nos. before Feb/05 only No. 801260137 D) DV 120 Bead Pressing Arm (Truck Tires) No. 0-12100701 E) Skidder Wheel Clamp No. 801251904 F) Locking Adaptor for Alloy Rim ø 161** No. 8-12100007 G) Locking Adaptor for Alloy Rim ø 202** No. 8-12100008 H) Locking Adaptor for Alloy Rim ø 211** No. 8-12100009 I) Locking Adaptor for Alloy Rim ø 281** No. 8-12100010 A. B. C. A. B. Passenger Car Tire Changer Standard Accessories/Parts A. B. C. D. Heavy-Duty Tire Changer Optional Accessories/Spare Parts E. F. H. I. J. A. B. C. D. E. G. K. *Until production Dec/2004 **For after Feb/05 production only F. G. H. I. Heavy-Duty Tire Changer Standard Accessories/Spare Parts models ag52 and 1200ecd/ecl-r A) Rim Pliers No. 900219244 B) Lubricator No. 900435443 C) 36 to 52 Extension (set of 4) No. 9005-300329 D) Tire Lever No. 900426388 E) Aluminum Bar Lever No. 900236905 A. B. C. D. E. Note: Because of ongoing product improvements, it is necessary to have the model and serial number available when inquiring about accessories or placing an order. When ordering wheel adapters for Automotive or Motorcycle applications, please provide the model and serial number for the machine. 18

EM Model Wheel Balancer Accessories/Parts AUTOMOTIVE/LIGHT TRUCK em430/8540/8570 40mm shaft Basic Automotive Accessories/Parts Group Standard w/em Balancers 38mm 40mm Includes the following: A) Conical Spring(For QL:900260738) No. 261072 No. 5-101468 B) Rubber Guard for Alloy Wheels No. 480595 No. 480595 C) Wheel Attaching Cap No. 228902 No. 228902 D) Spacer Cap No. 225662 No. 225662 E) Small Cone 1.6-2,7 No. 360901 No. 4-104790A F) Medium Cone 2,6-3,4 No. 360967 No. 4-104791 G) Large Cone 3,3-4 No. 900360968 No. 4-104792 H) Quick-Release Speed Nut No. 245053C No. 5-101561 I) Wheel Weight Hammer No. 203841 No. 203841 J) Calibration Weight/3.5 oz. No. 430573 No. 430573 K) Tire Caliper No. 453144 No. 223420 L) Extra-Large Cone 3,7-5,4 * No. 900326446 No. 4-105206 M) Rubber Guard for Alloy Wheels* No. 480596 No. 480596 N) Wheel Attaching Cap* No. 221169C No. 221169C *Not standard w/em430 Optional Model EM Accessories/Parts Group for Light Commercial Truck w/center Hole 4,7-6,7 No. 802263081 No. 8-21100141 Includes the following: A) Spacer No. 363080 No. 4-107426 B) Cone for Ford F350/450 Truck No. 363079 No. 4-107423 + 4-107424 Optional Alloy Wheel Precision Centering Bushing Set No. 802243301 No. 8-21100082 Includes the following: A) Bushing 2,22-2,24 (B1) No. 900343298 No. 4-105075 B) Bushing 2,55-2,63 (B2) No. 900343299 No. 4-105076 C) Bushing 2,81-2,85 (B3) No. 900343300 No. 4-105077 D) Bushing 2,50-2,52 (B4) No. 900344663 No. 4-105078 E) Bushing 2,28-2,36 (B5) No. 900344664 No. 4-105079 F) Bushing 2,12-2,20 (B7) No. 900349605 No. 4-105080 Optional Toyota Tacoma/4 Runner Cone No. 900900816A No. 900900817A A. B. C. D. EM Model Optional Wheel Balancer Accessories/Spare Parts E. I. F. J. K. L. M. N. A. B. A. B. C. D. G. H. E. F. 38mm 40mm Combi Adapter Set No. 802233514 No. 8-21100091 Includes the following: A) Wheel Adapter min. 3,5 max 8,2 No. 900445742 No. 9004105173 B) Conical Wheel Nuts (5) No. 900321878 No. 321878 C) Open-End Wrench (0,67 ) No. 2-00906 No. 2-00906 D) Caliper No. 441286 No. 441286 E) Conical Wheel Nut Wrench (0,86 ) No. 426517 No. 426517 F) Optional Wheel Nuts for Alloy Wheels Not Included w/combi Adapter No. 900322076 No. 802322076 Motorcycle Wheel Adapter No. 8-21100058 No. 8-21100103 Includes the following: A) Adapter No. 900235993 No. 5-101657 B) Measurement Extension No. 238326A No. 238326A C) Open-End Wrench (0,6 ) No. 443032 No. 443032 D) Special Screws (M8x22) No. 340687 No. 340687 E) Allen Wrench (0,23 ) No. 2-00906 No. 2-00906 Optional Pin Plate System No. 900200380A (38mm) No. 900200400A (40mm) Recommended for proper wheel mounting For all passenger balancers (confirm shaft size before ordering). Complete and easy-to-use system with mobile cart Covers vehicles up to 3/4 ton Laminated O.E. quick reference guide included 19

EM Model Optional Wheel Balancer Accessories/Spare Parts Motorcycle 10mm Arbor Assembly No. 802235997 Includes the following: A) Arbor (0,39 ) No. 335999A B) Centering Cone (0,39-0,9 ) No. 335998 C) Bushing (0,8 x1,6 ) No. 323076 D) Spacer (2) (1 x0,6 ) No. 323072 E) Arbor Nut (0,39 ) No. 344318A Motorcycle 14mm Arbor Assembly No. 802235989 Includes the following: A) Arbor (0,55 ) No. 335969 B) Arbor Nut No. 344317 C) Arbor Nut w/2,7 Extension No. 344335 D) Centering Cone 0,55-1 (2) No. 335970 E) Bushing 0,6 x1,5 No. 316151 F) Spacer (2) 1 x0,6 No. 316164 G) Centering Cone BMW 0,55-1,2 (2) No. 335972 H) Bushing BMW (0,6 ) (2) No. 319231 I) Bushing 1 x1,6 No. 316153 J) Bushing 0,8 x1,6 No. 316152 Motorcycle 18mm Arbor Assembly No. 802241240 Includes the following: A) Arbor (0,7 ) No. 341294 B) Centering Cone 0,7-1,2 (2) No. 341292 C) Bushing 0,8 x1,6 No. 323059 D) Spacer 1 x0,6 (2) No. 323058 E) Arbor Nut (0,7 ) No. 344319 F) Center Cone 1,1-1,5 No. 363089 G) Collet w/cone Ext. 0,9-1,5 No. 362808 14mm Arbor 15 Long for Suzuki No. 90090044A 18mm Arbor 15 Long for Suzuki No. 900900042A ET66 46 mm Shaft Standard Accessories/Parts Group ET Heavy-Duty Truck Balancer Accessories/Parts Includes the following: A) Spacer Flange No. 345160 B) Medium Cone 6,2-8 No. 900345161 C) Large Cone 8,6-11 No. 900345162 D) Wing Nut No. 802239121 E) Tire Caliper No. 239556 F) Calibration Weight (3.5 oz.) No. 430573 G) Calibration Weight (10 oz.) No. 439516 H) Wheel Weight Pliers No. 203841 I) Attaching Bolt (Requires 2) No. 2-00320 J) Calibration Cone 1,8-2,5 No. 339670B Optional A) Large Cone Spacer Ford 350/450 No. 802245527 B) Large Cone Spacer Ford 350/450 No. 900345161 Lug Adapter Set for Bus/Truck w/center Hole from 160-280 mm No. 802239637 A. B. C. D. E. F. G. H. I. J. A. B. Includes the following: A) Stepped Adapter 160 76/200 mm No. 339635A B) Stepped Adapter 220-280 mm No. 339636B C) Centering Studs (5) 18-35 mm No. 339668 D) Centering Studs (5) 28-47 mm No. 341818 E) Adapter Hub w/flange No. 900239655 F) Lug Hole Caliper No. 245514 A. B. C. D. Automotive Basic Set w/center Hole from 47-115 mm No. 802247782 Includes the following: A) Reduction Flange No. 900339673 B) Small Cone 47-64 mm No. 339670B C) Medium Cone 60-115 mm No. 900339671 Accessory Group for 4X4 and SUV w/center Hole from 110-165 mm No. 802247716 A. E B. F. C. Includes the following: A) Spacer No. 900341843 B) Double-Faced Cone 110 mm-165 mm No. 339672B A. B. 20

Optional Accessories for Alignment Description Part-No. 1) 19 LCD monitor 8-33100019 20 LCD monito 8-33100059 1 2 3 2) Inkjet coloured printer 803269206 3) Wheel bracket 10 to 26 for cars 8-33100035 4) Clamp for BMW and MERCEDES cars 8-33100041 4 5 5) Quick clamp 9 to 21 for cars 8-33100025 6) Set of 4 skip compensation clamp for trucks ONLY FOR TRUCK-PRESET ALIGNERS 8-33100051 7) LCD monitor holder EXACT 70 8-61200143 8) External battery recharge feeder EXACT 70 8-33100088 8 6 9 9) IR remote control kit EXACT 700-70 8-33100077 10) Mouse kit EXACT 70 8-33100078 7 11) Wheel alignment ON LINE databank - 10 credits card 8-33100043 12) Upgrade kit for vehicle adjustment by schematic animations EXACT 700-70 803257004 10 11 12 Upgrade kit for vehicle adjustment by schematic slides EXACT 70 803258443 Upgrade kit for Multilink working process EXACT 700-70 803257003 13 14 Upgrade kit for Truck and Trailer working process EXACT 700-70 803257001 Upgrade kit for cruise control RADAR calibration EXACT 700 8-33100003 15 16 13) Software CD EXACT 700-70 8-33100062 14) VEHICLE SPECS UPDATE EXACT 700-70 8-33100063 15) Video splitter kit 8-61200064 16) Kit of accessories for truck alignment EXACT 700-70 803253946 17) Kit of accessories for trailer alignment EXACT 700-70 803254570 17 18 18) 16mts cable connection from main unit to CCD sensors EXACT 700-70 8-33200012 19) Adapter for low body car L = 90 mm 803252515 20 20) Adapter for trucks and buses L = 240 mm 803232815 21) Set of 4 double profile pins for car wheel brackets 8-33100039 19 21 22) Adapter pin for MERCEDES original clamps & VAS 6041-6190-6430 803359301 23 23) Set of three 28 extensions for rapid clamps 8-33100026 24) Set of 12 pin extensions of 58 mm for rapid clamps 803284947 22 25) Set of 12 long pins (57 mm) for rapid clamps 803284945 26) Set of four safety connecting cords for sensors 803261239 27) Set of 4 PORSCHE adapter for clamps code 8-33100041 8-33100040 28) Set of 4 wheel clamp universal supports for cabinet or wall 8-33100048 24 25 21

Optional Accessories for Alignment Description Part-No. 26) Set of four safety connecting cords for sensors 803261239 26 27) Set of 4 PORSCHE adapter for clamps code 8-33100041 8-33100040 28) Set of 4 wheel clamp universal supports for cabinet or wall 8-33100048 27 29) Brake pedal depressor 8-33100081 30) Steering wheel holder 8-33100082 31) Low profile turntable - Dimensions 400x450x26 mm Ø 320 mm - Range ± 40 mm - Load 1000 kg 803229274 28 29 30 32) Long slip plate Dimensions 732x535x25 mm - Load 1000 kg 803231255 33) Alignment turntable with spacers for ERCO lifting equipment Dimensions 400x450x53 mm - Ø 320 mm - Range ± 40 mm - Load 1000 kg 804241069 34) Pair of car electronic turntables Dimensions 400x450x53 mm - Ø 320 mm - Range ± 40 mm - Load 1000 kg 803252094 31 32 33 35) ROC push-mode kit - iron turntable to be combined with 804241069 and 803252094 803259570 36) Pair of car professional electronic turntables Dimensions 450x450x50 mm - Ø 345 mm - Range ± 50 mm Low friction < 5 Nm Load 1000 kg 803261967 37) ROC push-mode kit - professional turntable to be combined with 803261967 and 8-33100022 8-33100017 38) Pair of ramp kits for professional electronics turntables 8-33100030 39) Truck turntable Dimensions 450x450x24 mm - Ø 365 mm - Range ± 45 mm - Load 3000 kg 803230950 40) Pair of mechanical turntables (to be combined with 8-43300082) Dimensions 375x305x47 mm - Ø 310 mm - Range ± 35 mm - Load 1000 kg 803268866 41) Certified professional calibration unit EXACT 700-700 - 70 803259519 42) Certified end of scale calibration kit (to be used with 803259519) EXACT 700-700 - 70 803259520 38 34 35 36 37 39 40 41 42 22

NOTES 23

The manufacturer reserves the right to modify the features of its products at any time. Cod. DPCG000185A - 07/10 Corghi USA Inc. Corghi Spa - ITALY To protect the planet and reduce paper usage, our catalogues are viewable online at the website www.corghi.com. Printing responsibly contributes to saving the environment. CORGHI Usa Inc. - 9325 Sutton Place, Hamilton 45011 OH Local number (513) 874-5958 - Toll free 1-800-260-0968 - www.corghiusa.us - e-mail: info@corghiusa.us