CATALOG Multi-Point Locks And Accessories
General Information Stefan Fliether, CEO and partner For many years KFV has represented much more than just high-quality door locks and multi-point locking mechanisms. We have set ourselves quality demands and the target to become one of the leading manufacturers of branded goods for the door industry, which requires the needed security that safeguards lives and property. These demands are behind our brand assurance: KFV The Protection Company. All over the world fabricators, salesmen and end users count on the quality and innovation, which is driven by KFV and hence our staff is busy working on the future of new locking systems. This quality driven approach as well as the consequent orientation towards service has made us the leading manufacturer of multi-point locking mechanisms in Germany. Trust the competence of KFV The Protection Company. About the company As a manufacturer of branded goods for door industry, KFV has produced door locking mechanisms since 1868. The company provides a comprehensive range of products, covering the entire field of modern locking system of key and lever operated multi-point locking mechanisms, heavy duty mortise locks for wooden, aluminium and PVC doors, high-tech products like motorised locking systems as well as a wide range of accessories. Standard profile cylinders and master key systems complete the program. Staff With about 600 employees in Germany and in international agencies KFV services its customers all over the world.
General Information Table Of Contents General Information Page About the company 2 KFV multi-point locks benefits 4 Single Doors Page High-security multi-point lock AS 4960 CP 5 Product information 6 Technical data 7 Routing pictures 8-9 Double Doors Page Locks For Double Doors Without T-Astragal High-security multi-point locks AS 7006 CP & AS 7961 CP 11 Product information 12 Technical data 14 Routing pictures 15-16 Standard-security multi-point locks AS 7001 CP & AS 7061 CP 13 Product information 13 Technical data 14 Routing pictures 15-16 Locks For Double Doors With T-Astragal High-security multi-point locks AS 7000 W 240 CP & AS 7960 CP 19 Product information 20 Technical data 22 Routing pictures 23-24 Standard-security multi-point locks AS 7000 W 240 CP & AS 7060 CP 21 Product information 21 Technical data 22 Routing pictures 23-24 Accessories Page Extensions Extensions 7033-2 CP 25 Extensions 7086 CP 26 Extensions 4980 CP 27 Extensions overview 28 Strikers 29 Bottom sleeve 30 Shootbolts 30 3
General Information KFV Multi-Point Locks Benefits: Corrosion resistant and qualified for hurricane tests A strong drive gear mechanism enables multi-point locking and thus promotes higher levels of resistance to forced entry, sound proofing and thermal insulation Hookbolts close from bottom to top permitting easy opening and closing even if the door settles to a lower level The steel hookbolts make the forcing apart of the door sash and frame more difficult Smooth locking and minimal effort is required to engage or disengage the additional hookbolts and shootbolts Top and bottom shootbolts draw the door panel into frame Due to a mishandling device in the main lock case, the handle can only be actuated, when the door is completely closed, thus no damages on the frame or floor can occur Deadbolt on the main lock is guarded against sawing KFV multi-point locks are reversible and can be used on right or left handed doors Extensive selection of accessories KFV quality oriented product policy the quality management system is certified in accordance with DIN EN ISO 9001 4
Multi-Point Lock For Single Doors High-Security AS 4960 CP 1. 1. Hookbolt 2. 2. Mishandling device 3. 3. Hookbolt Corrosion resistant multi-point lock for single doors qualified for hurricane tests and therefore ideal for coastal regions. The additional lock cases are each fitted with a hookbolt, which ensure extra protection against intruders. Due to a mishandling device in the main lock case the handle can only be actuated when the door is completely closed, and therefore no damages on the frame or floor can occur. Guaranteed security from start to finish. 5
Multi-Point Lock For Single Doors High-Security AS 4960 CP I Product Information Corrosion resistant multi-point lock qualified for hurricane tests, approved for impact, wind and rain infiltration and therefore ideal for coastal regions. 2830-730 One piece face plate, handle operated locking mechanism, main lock case accepts profile cylinder. Above and below the main lock case are additional lock cases each fitted with a steel hookbolt. lock unlock Note: Unlock before cutting to length. 8050-730 All lock cases are completely enclosed and thus protected against dirt and dust. Strikers are available in stainless steel with dust boxes. Note: For higher doors than 85 7 /16" add W 80 to the reference number, prepared for extensions. 2830-730 K 6
Multi-Point Lock For Single Doors Technical Data Ref. No. Type Face plate Dimensions in inch (mm) AS 4960 CP F 16 Flat 85 7 / 16 " x 5 / 8 " x 3 / 32 " (2170 x 16 x 2.5 mm) without extensions F 20 Flat 85 7 / 16 " x 25 / 32 " x 3 / 32 " (2170 x 20 x 2.5 mm) F 24 Flat 85 7 / 16 " x 15 / 16 " x 3 / 32 " (2170 x 24 x 2.5 mm) AS 4960 W 80 CP prepared F 16 Flat 82 11 / 16 " x 5 / 8 " x 3 / 32 " (2100 x 16 x 2.5 mm) for extensions F 20 Flat 82 11 / 16 " x 25 / 32 " x 3 / 32 " (2100 x 20 x 2.5 mm) F 24 Flat 82 11 / 16 " x 15 / 16 " x 3 / 32 " (2100 x 24 x 2.5 mm) For further details on extensions see page 25-28. Main lock case in inch (mm) Backset Distance 3 5 / 8 " (92 mm) 1 37 / 64 " 1 49 / 64 " 1 31 / 32 " 2 11 / 64 " 2 9 / 16 " (40 mm) (45 mm) (50 mm) (55 mm) (65 mm) Deadbolt projection 1" 1" 1" 1" 1" (25 mm) (25 mm) (25 mm) (25 mm) (25 mm) 5 / 16 " (8 mm) Lock Dimensions in inch (mm) A B C G I K Distance 3 5 / 8 " (92 mm) AS 4960 CP 85 7 / 16 " (2170 mm) AS 4960 W 80 CP 82 11 / 16 " (2100 mm) 29 59 / 64 " (760 mm) 29 59 / 64 " (760 mm) 28 47 / 64 " (730 mm) 28 47 / 64 " (730 mm) 40 5 / 32 " (1020 mm) 40 5 / 32 " (1020 mm) 12 19 / 32 " (320 mm) 9 27 / 32 " (250 mm) 6 19 / 64 " (160 mm) 6 19 / 64 " (160 mm) Accessories Door thickness 1 3 / 4 " Door thickness 2 1 / 4 " Striker for main lock case 8050-730 8050-731 Striker for additional lock case 2830-730 2830-731 For further details on strikers and shootbolts see page 29-30. 7
Multi-Point Lock For Single Doors Routing Picture For AS 4960 CP For Door Thickness 1 3 /4" 4 23/32" 22 3/8" 7 7/8" 23 11/16" 4 23/32" Y X Y B-B FRAME MACHINING - MULTI-POINT LOCKS AS 4960 CP SINGLE DOOR DOOR THICKNESS 1 3 /4" (AXIS 55/64") B HANDLE 2 1/4" 3 19/64" 1 9/16" 40 5/32" + CLEARANCE 40 5/32" HANDLE 7/16" B 7/16" CLEARANCE 2 1/4" 1 11/32" 2 1/4" 1 1/32" CUT OUT FOR STRIKER NO. 8050-730 M 1:20 1 39/64" 1 39/64" R 5/16" 45/64" CUT OUT FOR STRIKER NO. 2830-730 R 5/16" 45/64" Y 1:2 X 1:2 DOOR MACHINING - MULTI-POINT LOCKS AS 4960 CP SINGLE DOOR DOOR THICKNESS 1 3 /4" (AXIS 55/64") X 5 33/64" R 5/16" 22 13/32" A A 8 21/32" W 1 51/64" 40 5/32" HANDLE X 22 3/32" 5 33/64" 7 31/64" Ø 25/32" Z HANDLE FACE-PLATE 1/8" Z 1:2 3 5/8" 4 13/32" 5 25/64" 5/8" 5/8" 15/32" 5/64" A-A 1:2 1 3/4" 35/64" AXIS 55/64" 1/8" 3/8" RECOMMENDED SCREWS: WOOD SCREW (FLAT HEAD) 8 x 1" X 1:5 W 1:5 Ø 49/64" Ø 31/64" BACK-SET WOOD POCKET DEPTH M 1:20 8
Multi-Point Lock For Single Doors Routing Picture For AS 4960 CP For Door Thickness 2 1/4" 4 23/32" 22 3/8" 7 7/8" 23 11/16" 4 23/32" Y X Y B-B FRAME MACHINING - MULTI-POINT LOCKS AS 4960 CP SINGLE DOOR DOOR THICKNESS 2 1/4" (AXIS 1 7/64") B HANDLE 2 1/4" 3 19/64" 1 9/16" 40 5/32" + CLEARANCE 40 5/32" HANDLE 43/64" B 43/64" CLEARANCE 2 1/4" 1 11/32" 2 1/4" 1 1/32" CUT OUT FOR STRIKER NO. 8050-731 M 1:20 1 27/32" 1 27/32" R 5/16" 45/64" CUT OUT FOR STRIKER NO.. 2830-731 R 5/16" 45/64" Y 1:2 X 1:2 DOOR MACHINING - MULTI-POINT LOCKS AS 4960 CP SINGLE DOOR DOOR THICKNESS 2 1/4" (AXIS 1 7/64") X 5 33/64" R 5/16" 22 13/32" A A 8 21/32" W 40 5/32" HANDLE X 22 3/32" 5 33/64" 7 31/64" Z Ø 25/32" HANDLE FACE-PLATE 1/8" Z 1:2 3 5/8" 4 13/32" 5 9/32" 5/8" 5/8" 15/32" 5/64" A-A 1:2 2 1/4" 25/32" AXIS 1 7/64" 1/8" 3/8" RECOMMENDED SCREWS: WOOD SCREW (FLAT HEAD) 8 x 1 1/2" X 1:5 1 51/64" W 1:5 Ø 49/64" Ø 31/64" BACK-SET WOOD POCKET DEPTH M 1:20 9
10 Notes
Multi-Point Locks For Double Doors Without T-Astragal High-Security AS 7006 CP & AS 7961 CP 1. 1. 1. 3. Vertical pinbolt 2. 2. Mishandling device 3. 3. 4. 5. 4. Hookbolts 4. AS 7006 CP Inactive sash AS 7961 CP Active sash KFV has developed a corrosion resistant, Dade-County hurricane tested multi-point lock especially for double doors ideal for coastal regions. As no T-astragal is needed a better thermal and noise insulation is guaranteed. The additional hookbolts and the vertical locking shootbolts ensure extra protection against intruders. Due to a mishandling device in the main lock case the handle can only be actuated when the door is completely closed, and therefore no damages on the frame or floor can occur. Guaranteed security from start to finish. 5. Vertical pinbolt Adjustable bottom sleeve 11
Multi-Point Locks For Double Doors Without T-Astragal High-Security AS 7006 CP & AS 7961 CP Inactive Sash 7037-5 CP 7330-730 Active Sash 7037-5 CP Product Information Corrosion resistant multi-point locks without T-Astragal. These multi-point locks have been Dade-County hurricane tested and approved for impact, wind and rain infiltration and therefore ideal for coastal regions. I I AS 7961 CP for the active sash 130-730 One piece face plate, handle operated mechanism, main lock case accepts profile cylinder. Above and below the main lock case are additional lock cases each fitted with a steel hookbolt. Vertical locking elements - top and bottom (reverse action) shootbolts -, latch and deadbolt 19/32" (15 mm). lock All lock cases are completely enclosed and thus protected against dirt and dust. unlock Note: Unlock before cutting to length. 8050-730-1 AS 7006 CP for the inactive sash K 130-730 K One piece face plate, handle operated mechanism, main lock case accepts profile cylinder. Provided with counter boxes for the hookbolts of the active sash. Vertical locking elements only, top and bottom (reverse action) shootbolts, no latch or deadbolt. Lock case and counter boxes are completely enclosed and thus protected against dirt and dust. 7029 CP 881-00088 7029 CP Strikers are available in stainless steel with dust boxes. AS 7006 CP AS 7961 CP 12
Multi-Point Locks For Double Doors Without T-Astragal Standard Security AS 7001 CP & AS 7061 CP Inactive Sash 7037-5 CP 7330-730 Active Sash 7037-5 CP Product Information Corrosion resistant multi-point locks without T-Astragal approved for impact, wind and rain infiltration and therefore ideal for coastal regions. I I AS 7061 CP for the active sash One piece face plate, handle operated mechanism, main lock case accepts profile cylinder. Vertical locking elements - top and bottom (reverse action) shootbolts -, latch and deadbolt 19/32" (15 mm). Lock case is completely enclosed and thus protected against dirt and dust. lock unlock Note: Unlock before cutting to length. 8050-730-1 AS 7001 CP for the inactive sash K K One piece face plate, handle operated mechanism, main lock case accepts profile cylinder. Vertical locking elements only, top and bottom (reverse action) shootbolts, no latch or deadbolt. Lock case is completely enclosed and thus protected against dirt and dust. Strikers are available in stainless steel with dust boxes. AS 7001 CP 7029 CP 881-00088 7029 CP AS 7061 CP 13
Multi-Point Locks For Double Doors Without T-Astragal Technical Data Ref. No. Type Face plate Dimensions in inch (mm) AS 7006 CP with counter boxes, F 16 Flat 84 11 / 16 " x 5 / 8 " x 3 / 32 " (2151 x 16 x 2.5 mm) High-Security inactive sash (door length F 20 Flat 84 11 / 16 " x 25 / 32 " x 3 / 32 " (2151 x 20 x 2.5 mm) with top & bottom shootbolt) F 24 Flat 84 11 / 16 " x 15 / 16 " x 3 / 32 " (2151 x 24 x 2.5 mm) AS 7961 CP, active sash F 16 Flat 84 11 / 16 " x 5 / 8 " x 3 / 32 " (2151 x 16 x 2.5 mm) (door length with top & F 20 Flat 84 11 / 16 " x 25 / 32 " x 3 / 32 " (2151 x 20 x 2.5 mm) bottom shootbolt) F 24 Flat 84 11 / 16 " x 15 / 16 " x 3 / 32 " (2151 x 24 x 2.5 mm) AS 7001 CP with counter boxes, F 16 Flat 84 11 / 16 " x 5 / 8 " x 3 / 32 " (2151 x 16 x 2.5 mm) Standard-Security inactive sash (door length F 20 Flat 84 11 / 16 " x 25 / 32 " x 3 / 32 " (2151 x 20 x 2.5) mm with top & bottom shootbolt) F 24 Flat 84 11 / 16 " x 15 / 16 " x 3 / 32 " (2151 x 24 x 2.5 mm) AS 7061 CP without additional F 16 Flat 84 11 / 16 " x 5 / 8 " x 3 / 32 " (2151 x 16 x 2.5 mm) lock cases, active sash F 20 Flat 84 11 / 16 " x 25 / 32 " x 3 / 32 " (2151 x 20 x 2.5 mm) (door length with top & F 24 Flat 84 11 / 16 " x 15 / 16 " x 3 / 32 " (2151 x 24 x 2.5 mm) bottom shootbolt) For further details on extensions see page 25-28. Main lock case in inch (mm) Backset Distance 3 5 / 8 " (92 mm) 1 37 / 64 " 1 49 / 64 " 1 31 / 32 " 2 11 / 64 " 2 9 / 16 " (40 mm) (45 mm) (50 mm) (55 mm) (65 mm) Deadbolt projection 19 / 32 " 19 / 32 " 19 / 32 " 19 / 32 " 19 / 32 " (15 mm) (15 mm) (15 mm) (15 mm) (15 mm) 5 / 16 " (8 mm) Lock Dimensions in inch (mm) A B C G I K Distance 3 5 / 8 " (92 mm) High-Security AS 7006 CP 84 11 / 16 " (2151 mm) AS 7961 CP 84 11 / 16 " (2151 mm) 19 31 / 64 " (495 mm) 19 31 / 64 " (495 mm) 14 51 / 64 " (376 mm) 14 51 / 64 " (376 mm) 42" (1066 mm) 42" (1066 mm) 9 27 / 32 " (250 mm) 9 27 / 32 " (250 mm) 7" (178 mm) 7" (178 mm) Standard AS 7001 CP 84 11 / 16 " (2151 mm) AS 7061 CP 84 11 / 16 " (2151 mm) 19 31 / 64 " (495 mm) 19 31 / 64 " (495 mm) 14 51 / 64 " (376 mm) 14 51 / 64 " (376 mm) 42" (1066 mm) 42" (1066 mm) 9 27 / 32 " (250 mm) 9 27 / 32 " (250 mm) 7" (178 mm) 7" (178 mm) Accessories Door thickness 1 3 / 4 " Door thickness 2 1 / 4 " Striker for main lock case for AS 7006 CP & AS 7001 CP Striker for additional lock case for AS 7006 CP in combination with AS 7961 CP 8050-730-1 8050-731-1 130-730 130-731 Striker top (horizontal) 7330-730 7330-731 Adjustable bottom sleeve 881-00088 881-00088 Shootbolt top 7037-5 CP 7037-5 CP Shootbolt bottom (reverse action) 7029 CP 7029 CP For further details on strikers and shootbolts see page 29-30. 14
Multi-Point Locks For Double Doors Without T-Astragal Routing Picture For AS 7961 CP & AS 7006 CP For Door Thickness 1 3 /4" Note: This routing picture can also be applied foras 7001 CP & AS 7061 CP. These locks do not have additional lock cases! DOOR MACHINING - MULTI-POINT LOCKS AS 7961/7006 CP DOUBLE DOOR DOOR THICKNESS 1 3 /4" (AXIS 55/64") B-B 1:10 Y B 1/8" 1/8" INACTIVE SIDE (AS7006) ACTIVE SIDE (AS7961) RECOMMENDED SCREWS: WOOD SCREW (FLAT HEAD) 8 x 1" Y 1 : 2 HORIZONTAL FACE-PLATE TOP + BOTTOM X X 1 : 5 R 5/16" A A 4 23/32" 5 33/64" W 8 1/8" 8 15/32" X 42" HANDLE 1 57/64" 1 51/64" 7 7/8" 8 21/32" CUT OUT FOR STRIKER NO. 8050-730-1 Y B W 1 : 5 Ø 25/32" CUT OUT FOR STRIKER NO. 130-730 13 9/16" R 5/16" 1 39/64" 11 21/32" Z HANDLE 3 5/8" 5 33/64" 4 13/32" 4 23/32" 5 25/64" STRIKER NO. 130-730 FACE PLATE 1/8" Ø 49/64" Ø 31/64" INACTIVE SIDE ACTIVE SIDE 19 3/4" 19 9/64" BACK-SET + 3/32" BACK-SET 5/8" WOOD POCKET DEPTH + 3/32" WOOD POCKET DEPTH 3/8" 7/32" 1/8" 3/8" 1 43/64" 1 37/64" A-A 1 : 2 Z 1 : 2 1 3/4" INACTIV SIDE 5/64" ACTIVE SIDE AXIS 55/64" 1/16" 35/64" 15/32" 5/8" M 1:20 15
Multi-Point Locks For Double Doors Without T-Astragal Routing Picture For AS 7961 CP & AS 7006 CP For Door Thickness 2 1/4" Note: This routing picture can also be applied foras 7001 CP & AS 7061 CP. These locks do not have additional lock cases! DOOR MACHINING - MULTI-POINT LOCKS AS 7961/7006 CP DOUBLE DOOR DOOR THICKNESS 2 1/4" (AXIS 1 7/64") B-B 1:10 Y B 1/8" 1/8" INACTIVE SIDE (AS7006) ACTIVE SIDE (AS7961) RECOMMENDED SCREWS: WOOD SCREW (FLAT HEAD) 8 x 1 1/2" Y 1 : 2 HORIZONTAL FACE-PLATE TOP + BOTTOM X X 1 : 5 R 5/16" A A 4 23/32" 5 33/64" X W 42" HANDLE 1 57/64" 1 51/64" 8 1/8" 7 7/8" 8 15/32" 8 21/32" CUT OUT FOR STRIKER NO. 8050-731-1 Y B W 1 : 5 Ø 25/32" CUT OUT FOR STRIKER NO. 130-731 13 9/16" R 5/16" 1 27/32" 11 21/32" Z HANDLE 3 5/8" 5 33/64" 4 13/32" 4 23/32" 5 25/64" STRIKER NO. 130-731 FACE-PLATE 1/8" INACTIVE SIDE ACTIVE SIDE Ø 49/64" Ø 31/64" BACK-SET + 3/32" BACK-SET 19 9/64" 19 3/4" WOOD POCKET DEPTH + 3/32" WOOD POCKET DEPTH 5/8" 3/8" 7/32" 1/8" 3/8" A-A 1 : 2 1 43/64" 1 37/64" Z 1 : 2 2 1/4" INACTIVE SIDE ACTIVE SIDE 5/64" AXIS 1 7/64" 1/16" 25/32" 15/32" 5/8" M 1:20 16
Notes 17
18 Notes
Multi-Point Locks For Double Doors With T-Astragal High-Security AS 7000 W 240 CP & AS 7960 CP T-Astragal 1. INACTIV SIDE 1. 1. ACTIVE SIDE Vertical pinbolt 2. 3. 2. Mishandling device 3. 3. 4. 5. 4. Hookbolts 4. AS 7000 W 240 CP Inactive sash AS 7960 CP Active sash Vertical pinbolt Corrosion resistant multi-point lock for double doors qualified for hurricane tests and therefore ideal for coastal regions. The additional hookbolts and the vertical locking shootbolts ensure a better thermal and noise insulation and extra protection against intruders. Due to a mishandling device in the main lock case the handle can only be actuated when the door is completely closed, and therefore no damages on the frame or floor can occur. Guaranteed security from start to finish. 5. Adjustable bottom sleeve 19
Multi-Point Locks For Double Doors With T-Astragal (1" width) High-Security AS 7000 W 240 CP & AS 7960 CP Inactive Sash 7037-5 CP 7330-730 Active Sash 7037-5 CP Product Information Corrosion resistant multi-point locks for double doors, qualified for hurricane tests, approved for impact, wind and rain infiltration and therefore ideal for coastal regions. I I Note: A T-astragal ( 1" width) is needed for these multi-point locks. AS 7960 CP for the active sash 2830-730 One piece face plate, handle operated mechanism, main lock case accepts profile cylinder. Above and below the main lock case are additional lock cases each fitted with a steel hookbolt. Vertical locking elements - top and bottom (reverse action) shootbolts latch and deadbolt 1" (25 mm). All lock cases are completely enclosed and thus protected against dirt and dust. lock unlock Note: Unlock before cutting to length. 8050-730 AS 7000 W 240 CP for the inactive sash K 2830-730 K One piece face plate, handle operated mechanism, main lock case accepts profile cylinder. Vertical locking elements only, top and bottom (reverse action) shootbolts, no latch or deadbolt. Lock case is completely enclosed and thus protected against dirt and dust. Strikers are available in stainless steel with dust boxes. 7029 CP 881-00088 7029 CP AS 7000 W240 CP AS 7960 CP 20
Multi-Point Locks For Double Doors With T-Astragal (1" width) Product Information Standard Security AS 7000 W 240 CP & AS 7060 CP Inactive Sash 7037-5 CP 7330-730 Active Sash 7037-5 CP Product Information Corrosion resistant multi-point locks for double doors approved for impact, wind and rain infiltration and therefore ideal for coastal regions. Note: A T-astragal (1 width) is needed for these multi-point locks. I I AS 7060 CP for the active sash One piece face plate, handle operated mechanism, main lock case accepts profile cylinder. Vertical locking elements - top and bottom (reverse action) shootbolt, latch and deadbolt 1" (25 mm). Lock case is completely enclosed and thus protected against dirt and dust. lock unlock Note: Unlock before cutting to length. 8050-730 AS 7000 W 240 CP for the inactive sash K K One piece face plate, handle operated mechanism, main lock case accepts profile cylinder. Vertical locking elements only, top and bottom (reverse action) shootbolts, no latch or deadbolt. Lock case is completely enclosed and thus protected against dirt and dust. 7029 CP AS 7000 W240 CP 881-00088 7029 CP AS 7060 CP 21
Multi-Point Locks For Double Doors With T-Astragal (1" width) Technical Data Ref. No. Type Face plate Dimensions in inch (mm) High-Security AS 7000 W 240 CP, F 16 Flat 84 11 / 16 " x 5 / 8 " x 3 / 32 " (2151 x 16 x 2.5 mm) inactive sash (door length F 20 Flat 84 11 / 16 " x 25 / 32 " x 3 / 32 " (2151 x 20 x 2.5 mm) with top & bottom shootbolt) F 24 Flat 84 11 / 16 " x 15 / 16 " x 3 / 32 " (2151 x 24 x 2.5 mm) AS 7960 CP, active sash F 16 Flat 84 11 / 16 " x 5 / 8 " x 3 / 32 " (2151 x 16 x 2.5 mm) (door length with top & F 20 Flat 84 11 / 16 " x 25 / 32 " x 3 / 32 " (2151 x 20 x 2.5 mm) bottom shootbolt) F 24 Flat 84 11 / 16 " x 15 / 16 " x 3 / 32 " (2151 x 24 x 2.5 mm) AS 7060 CP without F 16 Flat 84 11 / 16 " x 5 / 8 " x 3 / 32 " (2151 x 16 x 2.5 mm) Standard additional lock cases, F 20 Flat 84 11 / 16 " x 25 / 32 " x 3 / 32 " (2151 x 20 x 2.5 mm) active sash (door length with F 24 Flat 84 11 / 16 " x 15 / 16 " x 3 / 32 " (2151 x 24 x 2.5 mm) top & bottom shootbolt) For further details on extensions see page 25-27. Main lock case in inch (mm) Backset Distance 3 5 / 8 " (92 mm) 1 37 / 64 " 1 49 / 64 " 1 31 / 32 " 2 11 / 64 " 2 9 / 16 " (40 mm) (45 mm) (50 mm) (55 mm) (65 mm) Deadbolt projection 1" 1" 1" 1" 1" (25 mm) (25 mm) (25 mm) (25 mm) (25 mm) 5 / 16 " (8 mm) Lock Dimensions in inch (mm) A B C G I K Distance 3 5 / 8 " (92 mm) High-Security AS 7000 W 240 CP 84 11 / 16 " (2151 mm) AS 7960 CP 84 11 / 16 " (2151 mm) 19 31 / 64 " (495 mm) 19 31 / 64 " (495 mm) 14 51 / 64 " (376 mm) 14 51 / 64 " (376 mm) 42" (1066 mm) 42" (1066 mm) 9 27 / 32 " (250 mm) 9 27 / 32 " (250 mm) 7" (178 mm) 7" (178 mm) Standard AS 7060 CP 84 11 / 16 " (2151 mm) 19 31 / 64 " (495 mm) 14 51 / 64 " (376 mm) 42" (1066 mm) Please note: 1" T-astragal width needed for door thickness 1 3 / 4 " and 2 1 / 4 " 9 27 / 32 " (250 mm) 7" (178 mm) Accessories Door thickness 1 3 / 4 " Door thickness 2 1 / 4 " Striker for main lock case for AS 7000 W 240 CP Striker for additional lock case for AS 7000 W 240 CP in combination with AS 7960 CP 8050-730 8050-731 2830-730 2830-731 Striker top (horizontal) 7330-730 7330-731 Adjustable bottom sleeve 881-00088 881-00088 Shootbolt top 7037-5 CP 7037-5 CP Shootbolt bottom (reverse action) 7029 CP 7029 CP For further details on strikers and shootbolts see page 29-30. 22
Multi-Point Locks For Double Doors With T-Astragal (1" width) Routing Picture For AS 7000 W 240 CP & AS 7960 CP For Door Thickness 1 3 /4" Note: This routing picture can also be applied for AS 7000 W 240 CP & AS 7060 CP. These locks do not have additional lock cases! C B Y INACTIVE SIDE (AS7000) ACTIVE SIDE (AS7961) X A A W X B Y C Z INACTIVE SIDE ACTIVE SIDE 42" HANDLE 1 3/4" ASTRAGAL INACTIVE SIDE ACTIVE SIDE HANDLE 3/8" 7/32" 1/8" 3/8" A-A 1 : 2 INACTIV SIDE 5/64" AXIS 55/64" 1/16" 35/64" 15/32" 5/8" ACTIVE SIDE RECOMMENDED SCREWS: WOOD SCREW (FLAT HEAD) 8 x 1" 5 33/64" 8 15/32" 8 21/32" 8 21/32" INACTIVE SIDE 11 21/32" 5 33/64" 36 59/64" INACTIVE SIDE 19 3/4" M 1:20 R 5/16" FACE PLATE 1/8" ASTRAGAL 1 43/64" 1" 1 37/64" Z 1 : 2 STRIKER NO. 2830-730 STRIKER NO. 8050-730 5/8" DOOR MACHINING - MULTI-POINT LOCKS AS 7961/7000 CP DOUBLE DOOR WITH ASTRAGAL DOOR THICKNESS 1 3/4" (AXIS 55/64") C-C 1 : 10 1/8" 1/8" Y 1 : 2 HORIZONTAL FACE-PLATE TOP + BOTTOM X 1 : 5 53/64" 4 23/32" 8 27/64" 1 51/64" 7 7/8" W 1 : 5 Ø 25/32" 1 39/64" 13 17/64" 3 5/8" 4 13/32" 5 25/64" 2 41/64" 4 23/32" Ø 49/64" Ø 31/64" BACK-SET + 3/32" BACK-SET 20 31/64" 19 7/16" WOOD POCKET DEPTH + 3/32" WOOD POCKET DEPTH B-B 1:10 R 23/64" 2 41/64" CUT OUT FOR STRIKER NO. 2830-730 R 5/16" CUT OUT FOR STRIKER NO. 8050-730 1 21/32" 10 13/16" 1 57/64" 1 21/32" 15 21/32" CUT OUT FOR STRIKER NO. 2830-730 23
Multi-Point Locks For Double Doors With T-Astragal (1" width) Routing Picture For AS 7000 W 240 CP & AS 7960 CP For Door Thickness 2 1/4" Note: This routing picture can also be applied for AS 7000 W 240 CP & AS 7060 CP. These locks do not have additional lock cases! C B INACTIVE SIDE (AS7000) ACTIVE SIDE (AS7961) Y X A A W X B Y C Z ASTRAGAL INACTIVE SIDE ACTIVE SIDE 42" HANDLE 2 1/4" ASTRAGAL HANDLE 3/8" 7/32" 1/8" 3/8" A-A 1 : 2 INACTIVE SIDE ACTIVE SIDE 5/64" AXIS 1 7/64" 1/16" 25/32" 15/32" 5/8" INACTIVE SIDE ACTIVE SIDE RECOMMENDED SCREWS: WOOD SCREW (FLAT HEAD) 8 x 1 1/2" 5 33/64" 8 15/32" 8 21/32" 8 21/32" INACTIVE SIDE 11 21/32" 5 33/64" 19 3/4" M 1:20 R 5/16" FACE PLATE 1/8" 1 43/64" 1" 1 37/64" Z 1 : 2 STRIKER NO. 2830-731 STRIKER NO. 8050-731 5/8" 1/8" 1/8" Y 1 : 2 HORIZONTAL FACE-PLATE TOP + BOTTOM X 1 : 5 1 51/64" W 1 : 5 Ø 25/32" 3 5/8" 4 13/32" 5 25/64" 2 41/64" Ø 49/64" Ø 31/64" BACK-SET + 3/32" BACK-SET WOOD POCKET DEPTH + 3/32" WOOD POCKET DEPTH 4 23/32" 8 27/64" 7 7/8" 13 17/64" 4 23/32" 19 7/16" B-B 1:10 36 59/64" INACTIVE SIDE R 5/16" DOOR MACHINING - MULTI-POINT LOCKS AS 7961/7000 CP DOUBLE DOOR WITH ASTRAGAL DOOR THICKNESS 2 1/4" (AXIS 1 7/64") C-C 1 : 10 1 1/16" 1 27/32" R 23/64" 2 41/64" CUT OUT FOR STRIKER NO. 2830-731 CUT OUT FOR STRIKER NO. 8050-731 1 21/32" 10 13/16" 1 57/64" 1 21/32" 15 21/32" CUT OUT FOR STRIKER NO. 2830-731 20 31/64" 24
Accessories Extensions Extensions 7033-2 CP For double doors, active sash with and without T-astragal for multi-point locks AS 7960 CP and AS 7961 CP For double doors, inactive sash with T-astragal for multi-point lock AS 7000 W 240 CP Ref. No. Maße in inch (mm) 7033-2 CP F16 9 27 /32" x 5 / 8" x 3 /32" (250 x 16 x 2.5 mm) 7033-2 CP F20 9 27 /32" x 25 /32" x 3 /32" (250 x 20 x 2.5 mm) 7033-2 CP F24 9 27 /32" x 15 /16" x 3 /32" (250 x 24 x 2.5 mm) 7033-2 CP W 001 F16 19 11 /16" x 5 / 8" x 3 /32" (500 x 16 x 2.5 mm) 7033-2 CP W 001 F20 19 11 /16" x 25 /32" x 3 /32" (500 x 20 x 2.5 mm) 7033-2 CP W 001 F24 19 11 /16" x 15 /16" x 3 /32" (500 x 24 x 2.5 mm) 7033-2 CP W 002 F16 29 17 /32" x 5 / 8" x 3 /32" (750 x 16 x 2.5 mm) 7033-2 CP W 002 F20 29 17 /32" x 25 /32" x 3 /32" (750 x 20 x 2.5 mm) 7033-2 CP W 002 F24 29 17 /32" x 15 /16" x 3 /32" (750 x 24 x 2.5 mm) 7033-2 CP W 003 F16 39 3 /8" x 5 / 8" x 3 /32" (1000 x 16 x 2.5 mm) 7033-2 CP W 003 F20 39 3 /8" x 25 /32" x 3 /32" (1000 x 20 x 2.5 mm) 7033-2 CP W 003 F24 39 3 /8" x 15 /16" x 3 /32" (1000 x 24 x 2.5 mm) 7033-2 CP W 003 7033-2 CP W 002 7033-2 CP W 001 7033-2 CP 25
Accessories Extensions Extensions 7086 CP For double doors, inactive sash, without T-astragal for multi-point lock AS 7006 CP Ref. No. Maße in inch (mm) 7086 CP W 001 F16 19 11 /16" x 5 / 8" x 3 /32" (500 x 16 x 2.5 mm) 7086 CP W 001 F20 19 11 /16" x 25 /32" x 3 /32" (500 x 20 x 2.5 mm) 7086 CP W 001 F24 19 11 /16" x 15 /16" x 3 /32" (500 x 24 x 2.5 mm) 7086 CP W 002 F16 29 17 /32" x 5 / 8" x 3 /32" (750 x 16 x 2.5 mm) 7086 CP W 002 F20 29 17 /32" x 25 /32" x 3 /32" (750 x 20 x 2.5 mm) 7086 CP W 002 F24 29 17 /32" x 15 /16" x 3 /32" (750 x 24 x 2.5 mm) 7086 CP W 003 F16 39 3 /8" x 5 / 8" x 3 /32" (1000 x 16 x 2.5 mm) 7086 CP W 003 F20 39 3 /8" x 25 /32" x 3 /32" (1000 x 20 x 2.5 mm) 7086 CP W 003 F24 39 3 /8" x 15 /16" x 3 /32" (1000 x 24 x 2.5 mm) 7086 CP W 003 7086 CP W 002 7086 CP W 001 26
Accessories Extensions Extensions 4980 CP For single doors for multi-point lock AS 4960 W 80 CP For double doors, active sash, with and without T-astragal for multi-point lock AS 7960 CP & AS 7961 CP Ref. No. Maße in inch (mm) Extensions without driving bar connection. 4980 CP F16 19 11 /16" x 5 / 8" x 3 /32" (500 x 16 x 2.5 mm) 4980 CP F20 19 11 /16" x 25 /32" x 3 /32" (500 x 20 x 2.5 mm) 4980 CP F24 19 11 /16" x 15 /16" x 3 /32" (500 x 24 x 2.5 mm) Extensions prepared for shootbolts, with driving bar connection. 4980 CP W 080 F16 19 11 /16" x 5 / 8" x 3 /32" (500 x 16 x 2.5 mm) 4980 CP W 080 F20 19 11 /16" x 25 /32" x 3 /32" (500 x 20 x 2.5 mm) 4980 CP W 080 F24 19 11 /16" x 15 /16" x 3 /32" (500 x 24 x 2.5 mm) 4980 CP W 002 F16 29 1 7 /32" x 5 / 8" x 3 /32" (750 x 16 x 2.5 mm) 4980 CP W 002 F20 29 17 /32" x 25 /32" x 3 /32" (750 x 20 x 2.5 mm) 4980 CP W 002 F24 29 1 7 /32" x 15 /16" x 3 /32" (750 x 24 x 2.5 mm) 4980 CP W 003 F16 39 3 /8" x 5 / 8" x 3 /32" (1000 x 16 x 2.5 mm) 4980 CP W 003 F20 39 3 /8" x 25 /32" x 3 /32" (1000 x 20 x 2.5 mm) 4980 CP W 003 F24 39 3 /8" x 15 /16" x 3 /32" (1000 x 24 x 2.5 mm) 4980 CP W 003 4980 CP W 002 4980 CP 4980 CP W 080 27
Accessories Extensions Overview Extensions for single doors Multi-point lock Standard Length (handle height 40 5 / 32 ") 4980 CP 19 11 / 16 " (500 mm) 7033-2 CP & 4980 CP 9 27 / 32 " & 19 11 / 16 " (250 mm) & (500 mm) 4980 CP W 080* & 4980 CP 19 11 / 16 " & 19 11 / 16 " (500 mm) & (500 mm) Min. Max. Min. Max. Min. Max. Min. Max. AS 4960 CP 72 27 / 32 " (1850 mm) 85 7 / 16 " (2170 mm) AS 4960 W 80 CP 82 11 / 16 " (2100 mm) 82 11 / 16 " (2100 mm) 102 23 / 64 " (2600 mm) 102 23 / 64 " (2600 mm) 112 13 / 64 " (2850 mm) 102 23 / 64 " (2600 mm) 122 3 / 64 " (3100 mm) * Extension with driving bar connection Extensions for double doors Multi-point lock Standard Length (handle height 42" with shootbolt top 7037-5 CP and shootbolt bottom - reverse action 7029 CP) 7033-2 CP 9 27 / 32 " (250 mm) 4980 CP 4980 CP W 080 7033-2 CP W 001 7086 CP W 001 19 11 / 16 " (500 mm) 4980 CP W 002 7033-2 CP W 002 7086 CP W 002 29 17 / 32 " (750 mm) 4980 CP W 003 7033-2 CP W 003 7086 CP W 003 39 3 / 8 " (1000 mm) Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. AS 7006 CP AS 7961 CP AS 7001 CP AS 7061 CP AS 7000 W 240 CP AS 7960 CP AS 7060 CP 74 27 / 32 " (1901 mm) 84 11 / 16 " (2151 mm) 84 11 / 16 " (2151 mm) 94 17 / 32 " (2401 mm) 94 17 / 32 " (2401 mm) 104 3 / 8 " (2651 mm) 104 3 / 8 " (2651 mm) 114 7 / 32 " (2901 mm) 114 7 / 32 " (2901 mm) 124 1 / 16 " (3151 mm) 28
Accessories Strikers Strikers for main lock cases Door thickness Ref. No. Dimensions in inch (mm) 1 3 / 4 " 8050-730-1 7 3 / 8 " x 1 11 / 16 " x 1 / 16 " (200 x 43 x 1.5 mm) 2 1 / 4 " 8050-731-1 7 3 / 8 " x 1 15 / 16 " x 1 / 16 " (200 x 49 x 1.5 mm) Application For double doors without T-astragal, inactive sash, AS 7006 CP; AS 7001 CP For double doors without T-astragal, inactive sash, AS 7006 CP; AS 7001 CP Door thickness Ref. No. Dimensions in inch (mm) 1 3 / 4 " 8050-730 7 3 / 8 " x 1 11 / 16 " x 1 / 16 " (200 x 43 x 1.5 mm) 2 1 / 4 " 8050-731 7 3 / 8 " x 1 15 / 16 " x 1 / 16 " (200 x 49 x 1.5 mm) Application For single door multi-point lock AS 4960 CP; AS 4960 W 80 CP For double doors with T-astragal, inactive sash, AS 7000 W 240 CP For single door multi-point lock AS 4960 CP; AS 4960 W 80 CP For double doors with T-astragal, inactive sash, AS 7000 W 240 CP 8050-730-1 8050-731-1 Strikers for additional lock cases Door thickness Ref. No. Dimensions in inch (mm) 1 3 / 4 " 130-730 4 47 / 64 " x 1 11 / 16 " x 1 / 16 " (120 x 43 x 1.5 mm) Application For double doors without T-astragal, inactive sash, AS 7006 CP 2 1 / 4 " 130-731 4 47 / 64 " x 1 15 / 16 " x 1 / 16 " (120 x 49 x 1.5 mm) For double doors without T-astragal, inactive sash, AS 7006 CP 130-730 130-731 Door thickness Ref. No. Dimensions in inch (mm) 1 3 / 4 " 2830-730 4 47 / 64 " x 1 11 / 16 " x 1 / 16 " (120 x 43 x 1.5 mm) Application For single doors AS 4960 CP; AS 4960 W 80 CP For double doors with T-astragal, inactive sash, AS 7000 W 240 CP 2 1 / 4 " 2830-731 4 47 / 64 " x 1 15 / 16 " x 1 / 16 " (120 x 49 x 1.5 mm) Note: Dust boxes available. For single doors AS 4960 CP; AS 4960 W 80 CP For double doors with T-astragal, inactive sash, AS 7000 W 240 CP 2830-730 2830-731 29
Accessories Strikers Horizontal striker for vertical locking - top Door thickness Ref. No. Dimensions in inch (mm) Application 1 3 / 4 " 7330-730 4 47 / 64 " x 1 11 / 16 " x 1 / 16 " (120 x 43 x 1.5 mm) 2 1 / 4 " 7330-731 4 47 / 64 " x 1 15 / 16 " x 1 / 16 " (120 x 49 x 1.5 mm) For the top shootbolts, for double doors with and without T-astragal For the top shootbolts, for double doors with and without T-astragal 7330-730 7330-731 Adjustable bottom sleeve Door thickness Ref. No. Application 1 3 / 4 " 881-00088 For the bottom shootbolts, for double doors with and without T-astragal 2 1 / 4 " 881-00088 For the bottom shootbolts, for double doors with and without T-astragal 881-00088 881-00088 Shootbolts Shootbolt top Ref. No. Type Face plate Dimensions in inch (mm) 7037-5 CP F-16 Flat 9 1 / 4 " x 5 /8 " x 3 / 32 " (235 x 16 x 2.5 mm) F-20 Flat 9 1 / 4 " x 25 / 32 " x 3 / 32 " (235 x 20 x 2.5 mm) F-24 Flat 9 1 / 4 " x 15 / 16 " x 3 / 32 " (235 x 24 x 2.5 mm) Shootbolt bottom (reverse action) Ref. No. Type Face plate Dimensions in inch (mm) 7029 CP F-16 Flat 9 1 / 4 " x 5 /8 " x 3 / 32 " (235 x 16 x 2.5 mm) F-20 Flat 9 1 / 4 " x 25 / 32 " x 3 / 32 " (235 x 20 x 2.5 mm) F-24 Flat 9 1 / 4 " x 15 / 16 " x 3 / 32 " (235 x 24 x 2.5 mm) 30
Accessories Sinking (Multi-Point Groove) INACTIVE SASH ACTIVE SASH 5/8 (16 mm) 15/32 (12 mm) 7/32 (5.5 mm) 5/8 (16 mm) 15/32 (12 mm) 3/32 (2.5 mm) 3/8 (9.5 mm) 3/8 (9.5 mm) Note: A routing jig for the subsequent mounting of a hurricane proof multi-point lock is also available from KFV. 31
KFV USA 1848 Cavendish Ct. #17 Charlotte, NC 28211 Phone: 704-366-0676 Fax: 704-365-5507 E-Mail: DWBoyer7@aol.com or salesusa@kfv.de KFV Karl Fliether GmbH & Co. KG Heidestraße 11 42549 Velbert Germany Tel.: +49 (0) 20 51 / 278-134 Fax: +49 (0) 20 51 / 278-33 salesusa@kfv.de www.kfv.de KFV 01/2006 We reserve the right to make technical changes at any time without prior notice.