Butterfly valves 32/0 to 300 mm Summary COATING Internal External Sale leaflet p.2 Spare parts list p.3 Overall dimensions p. Connecting flanges p. Normalisation p. Pressure/Temperature/Vacuum p.7 Flow rate/head loss p.7 Torque value p. Tag/Traceability p. Top connections for actuations p.9 Actuations p. Type of flange p.11 Torque values p.11 Bolts p.12 Installation p.13 Applications and main characteristics For chemical media, food processing industries and pure water Applications : High corrosion : toxic and highly corrosive fluids which do not allow the use of metallic materials and/or elastomer, and which require the exclusive use of PFA. Moderate corrosion : fluids moderately corrosive which require the use of a PFA liner combined with a stainless steel closing system. Fluids which require a high level of working safety : food, painting, etc. Main characteristics : Available in wafer type and lug type Two parts body in cast iron GJS2 Vertical and horizontal operating position. Disc : 31L stainless steel or PFA coated (2, mm thick) and PTFE liner (thickness 3 mm). Tightness at shaft location with bearing and spring. Option : heat-insulation Anti-ejection system of the shaft (even in case of removing of the actuation) Anti-static protection device Downstream removing and mounting at end of the line for lug type version. Body : Epoxy coated µm, colour blue RAL 017. According to the PED Directive 97/23/CE (Pressure Equipment Directive) and the ATEX Directive 9/9/CE (see page 7) Optional : grease-and-silicone-free, mounted in white room ISO class according to the norm ISO 1-1 : Please ask our technical department. An instruction notice specifying the installation characteristics and the commission of the is added to every product ; It is available on our web site or on request by our sales department. uklycene - Updated 13/0/0 1
Sale leaflet By concentrating the technologies and by integrating technical solutions of the highest levels, Danfoss Socla fulfils its ambition : competitiveness of a standard range, reliability, comprehensive range thanks to a multiplicity of solutions. Safety anti-ejection circlip keeps shaft in place and allows easy maintenance Safety reinforced by a secondary water tighness An reliable anti-static device, tress in contact between shaft and body, and outside tress for fixation on flanges Very high level of working safety for chemical and food fluids, and high purity process thanks to quality components : - - PTFE liner (3 mm thick) - 31L stainless steel disc and PFA coated discs in stainless steel 31L (2, mm thick) Liner back-up enclosed in the body ensures perfect disc tightness PFA coated disc version : protection reinforced by a PFA coated stem when tightness is required Tightness at shaft location with bearing and spring DI Danfoss Socla LI Liquid 1/2 Gas 1/2 / / bar bar Liquid 1/2 / bar II2DG bar Identification and traceability ensured by riveted metal tag : see next page. MADE IN FRANCE 2 uklycene - Updated 13/0/0
Spare parts list 1 17 22 1 7 19 1 1 2 23 21 22 20 21 23 2 17 19 1 PFA Version 11 13 20 1 1 2 3 11 3 9 13 7 12 12 2 1 Stainless Steel Version 1 3' 9 1 7 Nb. NAME Qty MATERIALS ACCORDING TO NORMS Materials IN ASTM JIS 1 Body 1 Ductile iron EN GJS 00-1 LT (JS 2) - - 2 Liner 1 PTFE 3 mm thick mini - - - 3 Disc (1) - (2) 1 Stainless steel X2 CrNiMo 17-12-2 (1.0) 31L SUS 31L 3 PFA coated 1 Stainless steel X2 CrNiMo 17-12-2 (1.0) 31L SUS 31L disc / one piece shaft (1) 1 PFA 2, mm thick mini - - - Packing guidance 2 Steel S300 Pb (1.0737) 12 L 1 - Safety packing 2 Silicone - - - Packing pressure ring 2 Steel S300 Pb (1.0737) 12 L 1-7 Spring washer Steel 0 CV (1.19) 1/10 SUP Seal 2 Silicone - - - 9 Spacer 2 Stainless steel X CrNi 1- (1.301) 30 SUS 30 Screw 2 Stainless steel A2-70 30 SUS 30 11 Upper shaft 1 Stainless steel X2 CrNiMo 17-12-2 (1.0) 31L SUS 31L 12 Lower shaft 1 Stainless steel X2 CrNiMo 17-12-2 (1.0) 31L SUS 31L 13 Guide bushes 1 Galvanized steel + PTFE - - - 1 Guide bushes 1 Galvanized steel + PTFE - - - 1 Anti-extrusion bush 1 Stainless steel X CrNi 1- (1.301) 30 SUS 30 1 O ring seal 1 FKM - - - 17 Ring 1 Stainless steel X CrNi 1- (1.301) 30 SUS 30 1 Circlips 1 Stainless steel X30 Cr13 (1.02) 20 SUS 20 J2 19 Braid 1 Tinned copper - - - 20 Rivet 2 Alu / Stainless steel - - - 21 Identification plate 1 Aluminium EN AW - AL99 (EN AW - 0A) - - 22 Anti-static tress 1 Tinned copper - - - 23 Screw 1 Stainless steel A2-70 30 SUS 30 2 Stop washer 1 Stainless steel X CrNi 1- (1.301) 30 SUS 30 (1) - NB : 32/0 : one piece disc shaft for both PFA and stainless steel disc versions (2) - optional : mirror polished disc uklycene - Updated 13/0/0 3
Overall dimensions øu H2 H1 D2 D1 H N holes ør on øs flat P H3 E L1 L2 øt A A square CxC Ring shaped type body only used for 32 and 0.in wafer type and lug type versions Wafer types Face to face ISO top according to EN ISO 211 Square shaft outlet Travel of the disc Weight Kg NPS E L1 H1 H2 H N ør øs øt øu N C H3 Plat P D1 D2 32 1 1/ 32, 17, 130 73, 12, 0 3 F0 11 19 11 2, 3,2 0 1 1/2 32, 17, 130 73, 12, 0 3 F0 11 19 11 2, 3,2 0 2 3, 122, 139 9 12, 0 3 F0 11 19 11 31 3, 2 1/2, 13, 1, 73 12, 0 3 F0 11 19 11 9 11 3, 3, 13 10 9 12, 0 3 F0 11 19 11 1, 0 2, 13, 17, 12, 70 90 F07 1 19 1 2,,2 12, 19 19 119 12, 70 90 F07 1 19 1 11 3 10, 21 202 131, 12, 70 90 F07 1 19 1 11, 9, 200 0, 270 2, 1 1, 2 12 71 F 17 2 20 192 71, 1, 20, 32 270 200 1, 2 12 71 F 22 32 2 22 92, 22, 300 12 7, 37, 29 23 1 12, 12 10 7 F12 22 32 2 291 112, 32, Lug types Face to face ISO top according to EN ISO 211 Square shaft outlet Travel of the disc NPS E L2 H1 H2 H N ør øs øt øu N C H3 Plat P D1 D2 32 1 1/ 32, 17, 130 73, 12, 0 3 F0 11 19 11 2, 3,2 0 1 1/2 32, 17, 130 73, 12, 0 3 F0 11 19 11 2, 3,2 0 2 3, 11 139 9 12, 0 3 F0 11 19 11 31 3,9 2 1/2, 17 1, 73 12, 0 3 F0 11 19 11 9 11,3 Weight Kg PN 3, 191 10 9 12, 0 3 F0 11 19 11 1, PN1 3, 17, 10 9 12, 0 3 F0 11 19 11 1,,2 0 2, 20 17, 12, 70 90 F07 1 19 1 2, 7,7 12, 239 19 119 12, 70 90 F07 1 19 1 11 3, 10, 2 202 131, 12, 70 90 F07 1 19 1 11, 11, 200 0, 32, 2, 1 1, 2 12 71 F 17 2 20 192 71, 22,1 20, 39, 270 200 1, 2 12 71 F 22 32 2 22 92, 29 300 12 7,, 29 23 1 12, 12 10 7 F12 22 32 2 291 112, 39, uklycene - Updated 13/0/0
Connecting flanges The LYCENE butterfly valve can be mounted with the following connections (other types on request) Wafer type : possible mounting : possible mounting with re-machining : impossible mounting ASME / EN 92-1 & EN 92-2 NPS ANSI B1. BS JIS B 223 & JIS B 2239 PN PN1 PN2 PN0 Class 10 Table D Table E K 1K 32 1 1/ 0 1 1/2 0 2 2 1/2 3 0 12 10 200 20 300 12 Lug type : possible mounting : impossible mounting ASME / EN 92-1 & EN 92-2 NPS ANSI B1. BS JIS B 223 & JIS B 2239 PN PN1 PN2 PN0 Class 10 Table D Table E K 1K 32 1 1/ 0 1 1/2 0 2 2 1/2 3 0 12 10 200 20 300 12 End of line mounting and downstream removing The end of line mounting and the downstream removing, at ambient temperature, of the butterfly valve is limited to the pressure mentioned on page (pressure/temperature/vacuum) according to the PED directive 97/23/CE. Downstream removing End of line mounting uklycene - Updated 13/0/0
Normalisation Design : According to EN 93 and marking according to EN 19. ISO top connection: ISO top connection according to EN ISO 211 Face to face : According to EN -1 series 20 ISO 72 series 20 API 09 table 1 Connecting flange : (see page ) According to EN 92-1 and EN 92-2 ASME/ANSI B1. Class 10 BS Table D and Table E JIS B 223 et JIS B 2239 Tests : According to EN122-1 tightness of the body (directive PED 97/23/CE) : Test P11 (1, x permissible operating pressure) tightness of the seat : test P12 rate A (1,1 x permissible operating pressure). According to EN122-2 anti-static device : test F21 European Directives : Our butterfly valves are in accordance to the safety requirements of the following directives. Directive 97/23/CE : Equipments under pressure PED (Pressure Equipment Directive) Applies to the design, manufacturing and the assessment of the conformity of pressure equipment, the maximum allowable pressure of which is 0. bar. Pressure equipment for water supply, distribution, and disposal of water is excluded. Depending on the type of pressure equipment, maximum allowable temperature (PS),, physical nature of the fluid (liquid, gas or vapour) and the degree of danger of the fluid (group1/2)*, the directive classifies this same equipment into different categories (article 3.3, I, II, III, IV), required for the assessment of conformity with CE marking. The equipment defined in article 3.3 of the directive must not bear the CE marking. (*) Group 1 : hazardous fluids (directive 7//EEC) / explosive / highly flammable /easily flammable / flammable / very toxic / toxic / combustion agents. Group 2 : all other fluids Important notice : the indicated pressure for the different categories of fluids (L1/L2/G1/G2) is under no condition a guarantee of use. Therefore, it is essential to validate the use of products under given operating conditions. Danfoss Socla is not responsible for modifications of the products to working conditions not previously specified by the customer. In order to facilitate your choice regarding these new regulatory requirements, Danfoss Socla has put the necessary information concerning products with CE marking, specification sheets and product identification plates at your disposal in the price list (+ see additional explanations on the detachable slip). In addition, the operating instructions are available on our web site www.danfoss-socla.com or by simple request from our sales department. Directive 9/9/CE : ATEX (EXplosive ATmospheres) This directive is only applicable for the following atmospheric conditions : -20 C < T < +0 C ; 0, bar P 1,2 bar. In this risk analysis, the fluid which passes through the valve is not taken into account. It is under the responsibility of the user to take into consideration the risks generated by the fluid like : heating of the surface of the valve, internal chocks generated by granulates, wave of chocks due to the installation (water hammering), or the risks due to foreign bodies which are inside the installation. Classification of the bare shaft valve : The marking of the bare shaft valve is : II 2 DG. Classification of the set valve + actuation : Valve with a hand lever : The use of hand levers produced by Danfoss Socla within a ATEX area do not represent additional risks. The valve with a hand lever is in conformity to the marking : II 2 DG. Valve with other actuations : The classification of the valve + actuation supplied by Danfoss Socla is similar to the lowest classification of the components which composed the assembly. No additional marking will be used to indicate the classification of the assembly. If a single element of the combination does ot carry the ATEX mark, then the entire valve/control combination does not conform to the ATEX directive The classification of the equipment allows its use in a determinate area; an use in another area is under the responsibility of the user. An instruction notice specifying the installation characteristics and the commission of the is added to every product ; It is available on our web site or on request by our sales department. uklycene - Updated 13/0/0
Pressure/Temperature/ Vacuum DIRECTIVE 97/23/CE Équipments under pressure Products manufactured in conformity with the requirements of the directive, according to pressure, and fluid (see on the precedent page ). Type Liner Mounting PFA (bar) PS (bar) in mm WATER L1 L2 G1 G2 Cat. PTFE / Silicone 32/0 to 300 Flanges II End of line x II Pressure / Temperature Diagram 32/0 to 300 Pressure in bar 20 to 300 32/0 to 300 Absolute pressure in mbar Temperature in C Flow rate - Head loss The butterfly valve is not the best product for regulating. Nevertheless, the butterfly valve can be used to regulate by an opening stage between 30 and 90. A regulation in the opening stage lower than 30 is not advisable because of over speed, cavitation effect which could damaged prematurely the valve. OPENING STAGE STAINLESS STEEL DISC 30 0 0 0 70 90 0 0, 11, 23 1 0, 7 0 1,9 9,3 22, 2 70 2 120, 19,7 1 79 137 1 2 1 2 90 1 2 3 00 0 27 9 1 27 3 2 00 12 3 1 23 71 23 1199 10 137 2 3 9 12 172 20 200 2 00 73 19 227 312 30 20 9 30 120 23 39 90 0 300 1 1790 2993 0 2 23 900 OPENING STAGE PFA coated STAINLESS STEEL DISC 30 0 0 0 70 90 32/0 1,,3 12, 2 0 2, 0 0 2,7, 2 77 0 1 2 7 9 1 1 190 1 99 17 29 32 3 0 3 1 272 390 00 12 7 17 32 73 113 1299 10 12 291 77 110 100 2009 200 200 13 172 2297 320 200 20 1 0 1 239 30 02 200 300 903 1917 32 022 0 12 9300 "KV" GALLON/MIN 0000 30000 2000 20000 1000 000 00 000 000 000 3000 200 2000 100 00 0 00 00 00 300 20 200 10 0 0 0 0 30 2 20 1 M3/H 000 00 000 000 000 3000 200 2000 100 00 0 00 00 00 300 20 200 10 0 0 0 0 30 2 20 1 3 2. 2 1. 1 Stainless steel disc 0 20 30 0 0 0 70 90 300 20 200 10 12 0 100 00 0 32-0 "KV" GALLON/MIN 0000 30000 2000 20000 1000 000 00 000 000 000 3000 200 2000 00 0 00 00 00 300 20 200 10 0 0 0 0 30 2 20 1 M3/H 000 00 000 000 000 3000 200 2000 100 00 0 00 00 300 20 200 10 0 0 0 0 30 2 20 1 3 2. 2 1. 1 PFA coated stainless steel disc 0 20 30 0 0 0 70 90 300 20 200 10 12 0 0 32-0 OPENING STAGES OPENING STAGE uklycene - Updated 13/0/0 7
Torque values Torques for dry fluids 32/0 0 0 12 10 200 20 300 in Nm PFA disc 3 3 39 1 7 120 1 30 0 70 Stainless Steel disc 3 2 1 70 90 13 270 33 90 Tag / Traceability DI Danfoss Socla 1 2 3 LI Liquid 1/2 / bar Gas 1/2 / bar Liquid 1/2 7 / bar II2DG 11 MADE IN FRANCE 9 12 13 bar Nb Description 1 Valve name 2 Reference 3 Material of the disc Material of the liner Pressure PS between flanges L1/L2 Pressure PS between flanges G1-G2 7 Pressure PS end flange L1/L2 Pressure PFA Water 9 Manufacturing date Marking relating to the directive ATEX 9/9/CE 11 Notified Body number for the directive PED 97/23/CE 12 Year of manufacturing 13 Connecting flanges uklycene - Updated 13/0/0
Connection kit for actuations H2 H1 H3 N holes ør on øs A direct mounting of the actuation is recommended, otherwise take the dimensions of the kits below NPS Iso top of the valve Iso top of the actuation F03 F0 F0 F07 F F12 F1 F1 H1 H2 H1 H2 H1 H2 H1 H2 H1 H2 H1 H2 H1 H2 H1 H2 32 1 1/ 190 190 190 190 2 0 1 1/2 190 190 190 190 2 0 2 F0/ 11 199 0 199 199 0 199 0 219 2 1/2 20, 20, 20, 20, 22, 0 3 2 2 2 2 230 0 23, 23, 23, 2, 2, 2, 12 F07/ 1 29 29 0 29 0 29 29 29 10 22 22 22 22 22 22 200 F/ 17 32, 32, 32, 32, 33, 33, 20 F/ 22 30 30 30 30 30 90 30 300 12 F12/ 22 37 3 90 3 90 3 3 90 Iso top of Exceeding length of the shaft H3 NPS the valve Kit 9 11 1 17 22 27 3 32 1 1/ F03 0 1 1/2 F0 0 2 F0/ 11 F0 7 9 12 1 20 2 2 1/2 F07 3 F 0 F0 12 F0 F07 F07/ 1 9 12 1 20 2 3 F 10 F12 F1 F0 F07 200 F/ 17 F 9 12 1 20 2 3 20 F/ 22 F12 F1 F0 F07 F F12 F1 F07 F 12 1 20 2 3 300 12 F12/ 22 F12 F1 F1 12 1 20 2 3 N N ør øs F03, 3 F0, 2 F0, 0 F07, 70 F, 2 F12 12, 12 F1 17 F1 22 1 Reminder of the iso top dimensions EN ISO 211 (see also the overall dimensions) Other versions on request uklycene - Updated 13/0/0 9
Actuations Find below the different assembly combinations. For any further information, please ask our technical Department. 1 or 2 mechanical limit switch ASSEMBLY LEVEL 1 ASSEMBLY LEVEL 2 Switchbox :. mechanical. inductive Inductive limit switch Positioners(1) Adjustable ductile iron hand lever (PRF) - (2) Notched ductile iron hand lever(pcf) Manual hand wheel Optional : with chain-wheel Remote control + emergency hand wheel Air torque (Optional : with emergency hand lever) For other options, please consult us. Auma Bernard HAND LEVER GEAR BOX PNEUMATIC ACTUATOR ELECTRIC ACTUATOR (1) Pneumatic actuator only (2) No assembly level 2 on this hand lever uklycene - Updated 13/0/0
Type of flange The butterfly valve has been designed to be mounted on normalised standard flanges. Only standard flanges type 11, 21 and 3 according to EN 92 are quite compatible. For other type of flanges, refer to the table below. Nevertheless, these connections are reservations-prone and can lead to a suspension of our guarantee. øa1 øa0 øa2 øb Ø A0 Ø A1 mini Ø A2 maxi Ø B mini 32/0 0 33 0 0 3 2 73 122 73 13 0 0 93 1 12 12 119 133 1 10 10 1 212 200 200 19 2 2 20 20 2 20 320 300 300 29 3 370 Thread torques Torques mm 32 0 0 0 12 10 200 20 300 inch 1 1/ 1 1/2 2 2 1/2 3 12 N.m 32 32 3 0 3 0 9 11 In.lbs 2 2 3 3 3 39 3 7 70 0 1 uklycene - Updated 13/0/0 11
Bolts and nuts Nota : bolts and nuts are not part of our standard supply. EN 92 PN EN 92 PN1 ASME / ANSI B1. Class 10 NPS a e * Nb of * Nb of * Nb of rods or nb øv c rods or nb øv c rods or nb øv UNC or screw or screw or screw c 32 1 1/ 32, 1 M1 1 M1 1 1/2" 1 0 1 1/2 32, 1 M1 1 M1 1 1/2" 1 0 2 3, 19 M1 1 M1 1 /" 1 2 1/2, 22 M1 1 M1 1 /" 1 3, 22 M1 1 M1 1 /" 1 0 2, 2 M1 1 M1 1 /" 1 12, 2 M1 1 M1 1 3/" 22 10, 2 M20 22 M20 22 3/" 22 200 0, 2 M20 22 12 M20 22 3/" 22 20, 33 12 M20 22 12 M2 2 12 7/" 2 300 12 7, 37 12 M20 22 12 M2 2 12 7/" 2 * WAFER TYPE BODY : Assembly by rods : Number of nuts = 2 x Number of rods (above) Assembly by bolts : Number of nuts = Number of screws (above) LUG TYPE BODY : Assembly by screws : Number of screws per face (above) For other dimensions, please consult corresponding norms and use the table below. ø V L1 c b a b c For wafer type bodies ; assembly by rods : L1 = a + 2(b+c) L1 = minimum length of rods a = width of the butterfly valve b = thickness of the flange ( customer) c = thickness of the nut + exceeding length of the rod ø V c b L2 a b For wafer type ; assembly by bolts : L2 = a + 2b + c L2 = mini length of screws under head a = width of the butterfly valve b = thickness of the flange (customer) c = thickness of the nut + exceeding length of the rod ø V L3 L e b For lug type ; assembly by screws : L3 b + e with L L3 - b L3 = maximum length under head of screws L = minimum length of the threading of the screws a = width of the butterfly valve b = thickness of the flange (customer) e = maxi depth of screws a 12 uklycene - Updated 13/0/0
Installation General remarks : For safety reasons, the installation must take place under the supervision of authorised people taking account of local safety instructions and advice. The handling of butterfly valves and their controls must be done by staff trained in all technical aspects of their operation. Before installation the pipes must be depressurised and purged (empty of its fluid) in order to avoid any danger to the operator. The pipe work must be correctly aligned so that no extra stress is exerted on the valve casing. In ATEX zone, check that the pipes are connected to the earth. Do not use insulating pipes (PVC...) Check the compatibility of the connection flanges against the operating pressure : the PN number of the flanges must be greater or equal to the operating pressure. The valve is a machined piece of equipment and must not be used to prise apart the flanges. An instruction notice specifying the installation characteristics and the commission of the is added to every product. It is available on our web site www.danfoss-socla.com or on request by our sales department. Installation conditions : It is recommended that the distances mentioned below be respected in order to prolong the life time of the valve. 1 Mounting the valve close to pipe work junctions places it in turbulent zones which increase its wear. 1 2-3 - 1 2-3 2-3 1 Danfoss can accept no responsibility for possible errors in catalogue, brochures and other printed material. Danfoss reserve the right to alter its products without notice. This also applies to products already agreed. All trademarks in this material are the property of the respective companies. Danfoss and the logo type are trademarks of Danfoss A/S. All right reserved. Danfoss Socla 3 rue du lieutenant Putier 7130 VIREY LE GRAND Postal address : BP273 717 CHALON SUR SAONE Cedex Tel : 33 3 97 2 2 Fax : 33 3 97 97 2 http://www.danfoss-socla.com e-mail:commer@danfoss.com uklycene - Updated 13/0/0 13