Commercial Solutions C02 Finish Glossary C02 Commercial Lock Functions C02 Handing Guide C03 Professional Door Hardware Scheduling Service Locks & Latches C05 Legge 990 Series Ordering Procedure C07 Legge 990 V Series C08 Legge 990 C Series C09 Legge 990 CD Series C09 Legge 990 N Series C10 Legge 990 D Series C10 Legge 990 S Series C11 Legge 995 Series Ordering Procedure C13 Legge 995 V Series C14 Legge 995 C Series C15 Legge 990 & 995 Series Accessories C17 Schlage A Series C18 Legge G2 Series C19 Schlage Tubular Latches C19 Schlage 950 Series Short Backsets C20 Schlage B250 Series Deadbolts C20 Legge Nightlatch Cylinders & Keying C21 Padlocks C22 Schlage SR Restricted Keying System C22 Schlage Cylinders C23 Legge Cylinders C23 Schlage Key Blanks C23 Legge Keying Door Furniture C24 Legge Levers C26 Door Furniture Ordering Procedures C31 Legge 67 Series C32 Legge 6000 Series C33 Legge 8000 Series C35 Legge 500 Series C39 Legge 700 Series C44 Legge 800 Series C46 Legge 5300 Series C49 Legge 5400 Series C50 Legge Commercial Furniture Accessories Entrance Handles C51 Legge Stainless Steel Entrance Handles C52 Entrance Handle Fixing Options & Drilling Details Door Controls C54 LCN 1461/1461T Series Surface Mounted Closers C55 LCN 4031/4031T Series Surface Mounted Closers C55 LCN 4040XP/4040XPT Series Surface Mounted Closers C56 LCN 4040 Sentronic Series Fire/Life Safety Closers C56 LCN 4300 Sentronic Series Fire/Life Safety Closers Door Controls C58 Briton 2300 Series Cam Action Closers C58 Briton 2700 Series Cam Action Closers C58 Briton 2400 Series Concealed Cam Action Closers C59 Briton 200 Series Surface Mounted Closers C59 Briton 1120 Series Surface Mounted Closers C60 Briton 1130 Series Surface Mounted Closers C60 Briton Transom Closers C61 Briton Floor Springs C62 Briton 2800 Pivot Sets C62 Briton 7500 Pivot Sets C62 Ives Pivot Sets C63 Briton Door Selectors C63 Ives Co-ordinators, Filler Bars & Mounting Brackets C63 Glynn Johnson Overhead Door Stops & Holders C64 Ives Flush Bolts & Dust Proof Strikes C64 Ives Lock Protectors Exit Devices C65 Von Duprin 22 Series C66 Von Duprin 33A Series C67 Von Duprin 88 Series C68 Von Duprin 99 Series C69 Von Duprin Chexit C69 Von Duprin Universal Strikes C71 Briton 370 Series General Hardware C72 Legge Satin Stainless Steel Pull Handles & Push Plates C72 Legge Satin Stainless Steel Flush Pulls C73 Legge Door Stops C75 Legge Wall/Floor Mounted Latch Back Door Holders C75 Legge Stainless Steel Hinges C76 Legge Roller Catches C76 Legge Flushbolt C76 Legge Chain Bolts C76 Schlage Cabinet Locks Washroom C77 Legge Shower Seats C77 Legge Indicator Bolts C77 Legge Signage C77 Schlage Grab Rails
Finish Glossary * These colours are indicative only, subject to limitations in the printing process. ABZ ALUM ORB SBC CP Antique Bronze Aluminium Oil Rubbed Bronze Saturn Black Chrome Chrome Plate PB SE SNP SSS Polished Brass Satin Chrome Plate Silver Satin Nickel Plate Satin Stainless *Minimum order quantites and lead times apply. Contact customer services for more details. Steel Commercial Lock Functions Keyed Locks Entrance/Office Lock Push-button locking. Push-button locks outside lever until unlocked with key or by rotating inside lever. Entrance Lock Turn/push-button locking; pushing and turning button locks outside handle requiring use of key until button is manually unlocked. Push-button locking; pushing button locks outside handle until unlocked by key or by turning inside handle. Classroom Lock Outside handle locked and unlocked by key. Inside handle always unlocked. Storeroom Lock Outside handle fixed. Entrance by key only. Inside handle always unlocked. Hotel/Motel Lock Outside handle fixed. Entrance by key only. Push-button in inside handle activates visual occupancy indicator allowing only emergency masterkey to operate. Turning inside handle or closing door releases visual occupancy indicator. Rotation of inside spanner-button provides lockout feature by keeping indicator thrown. Deadbolt/Deadlatch Locks Single Cylinder and Turn Deadbolt Deadbolt thrown or retracted by key from outside or by inside turn unit. Bolt automatically deadlocks when fully thrown. Double Cylinder Deadbolt Deadbolt thrown or retracted by key from either side. Bolt automatically deadlocks when fully thrown. Nightlatch Deadlocking latchbolt retracted by key from outside or by inside turn unit. Rotating turn unit and activating hold-back feature keeps latch retracted. Double Cylinder Deadlatch Deadlocking latchbolt retracted by key from either side. No hold-back feature. NZ Handing Guide ** Right Hand Door Left Hand Door OPENING OUT OPENING OUT OPENING IN OPENING IN C02 **Refer page C54 for USA Handing guide Outside Outside www.allegion.co.nz Customer Service Auckland: Ph 829 0553 National: Ph 0800 477 869
Professional Door Hardware Scheduling Service Allegion is pleased to provide a door hardware schedule writing service to the building industry. Whether it is a refurbishment or new project, small or large, the service is available to you at no cost. Along with the schedule writing service, other support is provided: Specification and schedule development for tender and supply (including master keying) Sample product for approval Post installation inspection to ensure all products are installed and operating correctly. With the increasing technical complexity of buildings, and compliance to standards and fire & disability codes, it is now more important than ever to specify the appropriate products. Allegion has the expertise and world-class products and brands to provide you with total solution security. Simply send us your plans, contact details and deadline: nzinfo@allegion.co.nz www.allegion.co.nz All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C03
Legge 990 Series 30 year mechanical warranty Door Type: Metal or Wood Backset: 60mm standard. 70mm, 89mm and 127mm available Fire Rated: 4 Hours - refer fire door manufacturer for approval Door Thickness: 32mm to 50mm - locks for doors up to 65mm thick available COMMERCIAL Locks & Latches Standard Lock Case Only Function Description Price L9MF L9N L9D L9S 990MF Multi Function Case Only 990 N Series Case Only 990 D Series Case Only 990 S Series Case Only 154.00 175.00 183.00 203.00 To convert the 990 series lock cases to specific 990 functions you will require the appropriate cams & cam adaptors as indicated on the following pages. Extended Backset (V, C & N Series Only) Backset 70mm 89mm 127mm Price add 80.00 add 100.00 add 140.00 Ordering Procedure L9V 31 S 70 Function Sub-Function Finish Backset Vestibule... L9V Combination.. L9C Nightlatch... L9N Deadlock.... L9D Sliding Door...L9S refer following pages Satin Chrome..... S * Refer to lock kits on page C15 for other finishes. 60mm.. leave blank 70mm...70 89mm...89 127mm.... 127 1. Function Select the desired function e.g. Vestibule Lock... L9V 2. Sub-function Select the required sub-function e.g. V31 Office/Classroom Locking Latch... L9V31 3. Finish Select the desired finish e.g. Satin Chrome... L9V31S 4. Backset Nominate the non-standard backset if required e.g. 70mm... L9V31S70 Note: Prices listed on following pages are for complete locks inclusive of case, cylinder, cams and adaptors Deduct $40.00 per cylinder not required All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15% C05
COMMERCIAL Locks & Latches
Legge 990 V Series Function/Sub-Function Description Price V7 (RH) V8 (LH) V9 (RH) V10 (LH) Exterior & Exit Lock Outside key operates bolt at all times. Inside key locks and unlocks outside handle. Outside handle operative except when locked by inside key. Inside handle always unlocked Storeroom Lock Key operates bolt at all times. Outside handle fixed. Inside handle always unlocked 271.00 228.00 COMMERCIAL Locks & Latches V11 (RH) V12 (LH) Single Action Lock Key operates bolt at all times. Inside handle always unlocked 228.00 V21 (RH) V22 (LH) Vestibule Lock Key locks and unlocks outside handle. Inside turn locks and unlocks outside handle. Outside handle operative except when locked by outside key or inside turn. Inside handle always unlocked 236.00 V25 (RH) V26 (LH) V29 (RH) V30 (LH) Anti-lockout Lock Key locks and unlocks outside handle. Inside turn locks and unlocks outside handle. Outside handle operative except when locked by outside key or inside turn. Inside handle always unlocked. Closing door or operating inside handle will unlock mechanism and make the outside handle operative Classroom Lock Key locks and unlocks outside handle. The reverse turn of the key retracts the bolt. Outside handle operative except when locked by outside key. Inside handle always unlocked 236.00 236.00 V31 (RH) V32 (LH) Office/Classroom Locking Latch Key locks and unlocks outside handle. Outside handle operative except when locked by outside key. Inside handle always unlocked 228.00 V41 (RH) V42 (LH) Exterior & Exit Lock Inside turn locks and unlocks outside handle. Outside handle operative except when locked by inside turn. Inside handle always unlocked 192.00 V49 (RH) V50 (LH) Exterior & Exit Lock Inside key locks and unlocks outside handle. Outside handle operative except when locked by inside key. Inside handle always unlocked 228.00 V55 (RH) V56 (LH) Exit Latch Outside handle fixed. Inside handle always unlocked 179.00 V1 (RH) V2 (LH) Vestibule Lock Key operates bolt at all times. Inside turn locks and unlocks outside handle. Outside handle operative except when locked by inside turn. Inside handle always unlocked 236.00 All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15% C07
Legge 990 C Series COMMERCIAL Locks & Latches Function/Sub-Function Description Price C7 (RH) C8 (LH) C21 (RH) C22 (LH) Double Cylinder Lock Outside key operates bolt at all times. Inside key locks and unlocks both handles. Both outside and inside handles operative except when locked by inside key Entry Lock Key locks and unlocks both handles. Turn locks and unlocks both handles. Both outside and inside handles operative except when locked by outside key or inside turn 271.00 236.00 C23 (RH) C24 (LH) Turn Exit Lock Key locks and unlocks both handles. Inside turn operates bolt at all times. Both outside and inside handles operative except when locked by outside key 236.00 C27 (RH) C28 (LH) Double Cylinder Lock Keys lock and unlock both handles. Both outside and inside handles operative except when locked by either key 271.00 C31 (RH) C32 (LH) Exterior Door Lock Key locks and unlocks both handles. Both outside and inside handles operative except when locked by outside key 228.00 C33 (RH) C34 (LH) Privacy Latch Emergency button unlocks both handles. Inside turn locks and unlocks both handles. Both outside and inside handles operative except when locked by inside turn 192.00 C41 (RH) C42 (LH) Exterior Privacy Latch Inside turn locks and unlocks both handles. Both outside and inside handles operative except when locked by inside turn 192.00 C49 (RH) C50 (LH) Interior Door Lock Inside key locks and unlocks both handles. Both outside and inside handles operative except when locked by inside key 228.00 C57 (RH) C58 (LH) Passage Latch Both handles always operative 161.00 C1 (RH) C2 (LH) Entry Lock Key operates bolt at all times. Inside turn locks and unlocks both handles. Both outside and inside handles operative except when locked by inside turn 236.00 C08 www.allegion.co.nz Customer Service Auckland: Ph 829 0553 National: Ph 0800 477 869
Legge 990 CD Series Function/Sub-Function Description Price CD21 (RH) CD22 (LH) CD27 (RH) CD28 (LH) Entry Lock Key locks and unlocks both handles and bolt. Inside turn locks and unlocks both handles and bolt. Both outside and inside handles operative except when locked by outside key or inside turn Double Cylinder Lock Outside key locks and unlocks both handles and bolt. Inside key locks and unlocks both handles and bolt. Both outside and inside handles operative except when locked by either key 243.00 276.00 COMMERCIAL Locks & Latches CD31 (RH) CD32 (LH) Exterior Door Lock Key locks and unlocks both handles and bolt. Both outside and inside handles operative except when locked by outside key 234.00 CD41 (RH) CD42 (LH) Exterior Privacy Latch Inside turn locks and unlocks both handles and bolt. Both outside and inside handles operative except when locked by inside turn 199.00 CD49 (RH) CD50 (LH) Interior Door Lock Key locks and unlocks both handles and bolt. Both outside and inside handles operative except when locked by inside key 234.00 Legge 990 N Series Function/Sub-Function Description Price N1 (RH) N2 (LH) Nightlatch Outside key operates bolt. Inside turn operates bolt and hold back function 219.00 N3 Communicating Door Latch Both keys operate bolt 268.00 N5 (RH) N6 (LH) Cylinder Latch Outside key operates bolt 219.00 N7 (RH) N8 (LH) Exit Door Latch Inside turn operates bolt and hold back function 175.00 N9 (RH) N10 (LH) Fire Door Nightlatch Outside key operates bolt. Inside turn operates bolt 219.00 All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15% C09
Legge 990 D Series COMMERCIAL Locks & Latches Function/Sub-Function Description Price D1 D3 Entry Deadlock Key operates bolt. Inside turn operates bolt Double Cylinder Deadlock Both keys operate bolt 240.00 276.00 D5 Lock-Up Shop Deadlock Outside key operates bolt 230.00 D7 Exit Deadlock Inside turn operates bolt 194.00 D9 (RH) D10 (LH) Institutional Deadlock Key operates bolt. Inside institutional turn operates bolt but slips when key operates cylinder Note: Recommended for use with 500 or 700 series furniture plates. 500 Series - 515 cylinder hole plate & 510/AH turn plate 700 Series - 715 cylinder hole plate & 710/AH turn plate 450.00 Legge 990 S Series Function/Sub-Function Description Price S1 Sliding Door Lock Outside key operates bolt. Inside turn operates bolt 261.00 S3 Sliding Double Cylinder Deadlock Both keys operate bolt 299.00 S5 Lock-Up Shop Sliding Door Deadlock Outside key operates bolt 249.00 S7 Exit Sliding Door Deadlock Inside turn operates bolt 213.00 S33 Sliding Door Privacy Latch Emergency button operates bolt. Inside turn operates bolt 213.00 C10 www.allegion.co.nz Customer Service Auckland: Ph 829 0553 National: Ph 0800 477 869
Legge 995 Series 30 year mechanical warranty Door Type: Metal standard. Faceplate to suit wood doors available Backset: 23mm standard. 30mm and 38mm available Door Thickness: 32mm to 50mm. Locks for doors up to 60mm thick available COMMERCIAL Locks & Latches Standard Lock Case Only Function Description Price L95MF 995MF Multi Function Case Only 255.00 To convert the 995MF series lock cases to specific 995MF functions you will require the appropriate cams & cam adaptors as indicated on the following pages. Extended Backset Backset 30mm 38mm Price add 40.00 add 50.00 Ordering Procedure L95V 31 W S 30 Function Sub-Function Door Type Finish Backset Vestibule...L95V Combination L95C refer following pages Metal... leave blank Wood.... W Satin Chrome..... S * Refer to lock kits on page C15 for other finishes. 23mm.. leave blank 30mm...30 38mm...38 1. Function Select the desired function e.g. Vestibule Lock... L95V 2. Sub-function Select the required sub-function e.g. V31 Office/Classroom Locking Latch... L95V31 3. Door type Nominate the non-standard door type if required e.g. Timber/Wood... L95V31W 4. Finish Select the desired finish e.g. Satin Chrome... L95V31WS 5. Backset Nominate the non-standard backset if required e.g. 30mm... L95V31WS30 Note: Prices listed on following pages are for complete locks inclusive of case, cylinder, cams and adaptors Deduct $40.00 per cylinder not required All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15% C11
COMMERCIAL Locks & Latches
Legge 995 V Series Function/Sub-Function Description Price V7 (RH) V8 (LH) V9 (RH) V10 (LH) Exterior & Exit Lock Outside key operates bolt at all times. Inside key locks and unlocks outside handle. Outside handle operative except when locked by inside key. Inside handle always unlocked Storeroom Lock Key operates bolt at all times. Outside handle fixed. Inside handle always unlocked 372.00 333.00 COMMERCIAL Locks & Latches V11 (RH) V12 (LH) Single Action Lock Key operates bolt at all times. Inside handle always unlocked 333.00 V21 (RH) V22 (LH) Vestibule Lock Key locks and unlocks outside handle. Inside turn locks and unlocks outside handle. Outside handle operative except when locked by outside key or inside turn. Inside handle always unlocked 339.00 V31 (RH) V32 (LH) Office/Classroom Locking Latch Key locks and unlocks outside handle. Outside handle operative except when locked by outside key. Inside handle always unlocked 333.00 V41 (RH) V42 (LH) Exterior & Exit Lock Inside turn locks and unlocks outside handle. Outside handle operative except when locked by inside turn. Inside handle always unlocked 294.00 V49 (RH) V50 (LH) Exterior & Exit Lock Inside key locks and unlocks outside handle. Outside handle operative except when locked by inside key. Inside handle always unlocked 333.00 V55 (RH) V56 (LH) Exit Latch Outside handle fixed. Inside handle always unlocked 282.00 V1 (RH) V2 (LH) Vestibule Lock Key operates bolt at all times. Inside turn locks and unlocks outside handle. Outside handle operative except when locked by inside turn. Inside handle always unlocked 339.00 All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C13
Legge 995 C Series COMMERCIAL Locks & Latches Function/Sub-Function Description Price C7 (RH) C8 (LH) C21 (RH) C22 (LH) Double Cylinder Lock Outside key operates bolt at all times. Inside key locks and unlocks both handles. Both outside and inside handles operative except when locked by inside key Entry Lock Key locks and unlocks both handles. Turn locks and unlocks both handles. Both outside and inside handles operative except when locked by outside key or inside turn 372.00 339.00 C23 (RH) C24 (LH) Turn Exit Lock Key locks and unlocks both handles. Inside turn operates bolt at all times. Both outside and inside handles operative except when locked by outside key 339.00 C27 (RH) C28 (LH) Double Cylinder Lock Keys lock and unlock both handles. Both outside and inside handles operative except when locked by either key 372.00 C31 (RH) C32 (LH) Exterior Door Lock Key locks and unlocks both handles. Both outside and inside handles operative except when locked by outside key 333.00 C33 (RH) C34 (LH) Privacy Latch Emergency button unlocks both handles. Inside turn locks and unlocks both handles. Both outside and inside handles operative except when locked by inside turn 294.00 C41 (RH) C42 (LH) Exterior Privacy Latch Inside turn locks and unlocks both handles. Both outside and inside handles operative except when locked by inside turn 294.00 C49 (RH) C50 (LH) Interior Lock Inside key locks and unlocks both handles. Both outside and inside handles operative except when locked by inside key 333.00 C57 (RH) C58 (LH) Passage Latch Both handles always operative 282.00 C1 (RH) C2 (LH) Entry Lock Key operates bolt at all times. Inside turn locks and unlocks both handles. Both outside and inside handles operative except when locked by inside turn 339.00 C14 www.allegion.co.nz Customer Service Auckland: Ph 829 0553 National: Ph 0800 477 869
Legge 990 & 995 Series Accessories Note: Allow 15 working days for NON- finishes minimum order charges may apply. Accessories Finishes Description ABZ ORB SBC CP PB Price R13 Rebate Kit for 990 V, C, CD, N Series L9RA L9RORB L9RSBC L9RC L9RP L9RS 76.00 DR13 Rebate Kit for 990 D Series L9DRA L9DRORB L9DRSBC L9DRC L9DRP L9DRS 76.00 LL40 40mm Short Lipped Strike LY9-LL40A LY9-LL40ORB LY9-LL40SBC LY9-LL40C LY9-LL40P LY9-LL40S 28.50 LL50 50mm Long Lipped Strike LY9-LL50A LY9-LL50ORB LY9-LL50SBC LY9-LL50C LY9-LL50P LY9-LL50S 28.50 LL60 60mm Long Lipped Strike LY9-LL60A LY9-LL60ORB LY9-LL60SBC LY9-LL60C LY9-LL60P LY9-LL60S 28.50 COMMERCIAL Locks & Latches LL70 70mm Long Lipped Strike LY9-LL70A LY9-LL70ORB LY9-LL70SBC LY9-LL70C LY9-LL70P LY9-LL70S 28.50 LL80 80mm Long Lipped Strike LY9-LL80A LY9-LL80ORB LY9-LL80SBC LY9-LL80C LY9-LL80P LY9-LL80S 28.50 LL90 90mm Long Lipped Strike LY9-LL90A LY9-LL90ORB LY9-LL90SBC LY9-LL90C LY9-LL90P LY9-LL90S 28.50 Parts Finish Description Price 990 Outer Forend V, C & N Z994062 12.00 990 Outer Forend D & S Z994442 12.00 990 Strike Plate V, C & N Z994072 18.50 995 Strike Plate V & C Z995082 18.50 990 Strike Plate D & S Z990462 18.50 990 Screw Pack V, C & N Z994090 3.00 995 Screw Pack Metal Z995120 8.30 995 Screw Pack Wood Z995130 5.30 990 Screw Pack D & S Z990480 3.00 995 Forend Metal (995-FM) Z995092 26.00 995 Forend Wood (995-FW) Z995103 50.50 990 Extension Kit 55 65mm (screws, 50mm striker, spindles and cylinder) L9EXT50S 89.00 990 Extension Kit 55 65mm (screws, 60mm striker, spindles and cylinder) L9EXT60S 89.00 990 Cylinder Retaining Screw Z994081 3.50 995 Cylinder Retaining Screw Z995035 1.30 990/995 Spindle Pack V Z990085 5.30 990/995 Extended Split Spindle (each) Z990451 1.80 990 Strike Dust Box (Plastic) Z990080 0.80 995 Strike Dust Box (Metal) Z995072 3.50 Special Finish Lock Kits Finishes Description ABZ ORB SBC CP PB Price 990 Special Finish Lock Kit (screws, striker & outer forend) L990ABZ L990ORB L990SBC L990CP L990PB 50.00 995 Special Finish Lock Kit (screws, striker & outer forend metal) L995MABZ L995MORB L995MSBC L995MCP L995MPB 80.00 995 Special Finish Lock Kit (screws, striker & outer forend wood) L995WABZ L995WORB L995WSBC L995WCP L995WPB 80.00 All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C15
Legge 990 & 995 Series Accessories COMMERCIAL Locks & Latches Cams & Adaptors Description Handing Code Price #1 Cam (990/995) Z990201 0.70 1 #1A Cam Adapter (990/995) Z990202 11.50 1A #2 Cam (990/995) Z990204 0.70 2 #3 Cam (990) Z990206 0.70 3 #3A Cam Adapter (990) Z990199 11.50 31A #4A Cam Adapter Anti-Lockout (990) LH RH Z990208 Z990209 11.50 11.50 4A-LH 4A-LH 4A-RH 4A-RH #5 Cam (990/995) Z990211 0.70 5 #6A Cam Adapter (990/995) Z990214 11.50 6A #7A Cam Adapter (990) Z990222 11.50 7A #8 Cam (990) LH RH Z990216 Z990218 0.70 0.70 8-LH 8-RH #8A Cam Adapter (990) Z990223 11.50 8A C16 www.allegion.co.nz Customer Service Auckland: Ph 829 0553 National: Ph 0800 477 869
Schlage A Series 10 year mechanical warranty Door Thickness: 35mm to 48mm Backset: 70mm standard, 60mm, 95mm and 127mm available Fire Rated: Refer fire door manufacturer for approval Plymouth Finish Description Price A10S Passage Latch SCL10483 149.00 A40S Privacy Lock SCL10487 169.00 A53PD Entrance Lock SCL10492 281.00 COMMERCIAL Locks & Latches A70PD Classroom Lock SCL10495 305.00 A80PD Storeroom Lock SCL10501 305.00 Orbit A170 Single Dummy Trim SCL10482 71.50 Finish Description Price A10S Passage Latch SCL18056 INDENT A40S Privacy Lock SCL10715 INDENT A53PD Entrance Lock SCL10717 INDENT A70PD Classroom Lock SCL10719 INDENT A80PD Storeroom Lock SCL10725 INDENT AL Neptune A170 Single Dummy Trim SCL10732 INDENT Finish Description Price Accessories & Parts AL10S Passage Latch SCL25592 INDENT AL40S Privacy Lock SCL25593 INDENT AL50PD Entrance/Office Lock SCL26012 INDENT AL70PD Classroom Lock SCL25595 INDENT AL80PD Storeroom Lock SCL25596 INDENT AL170 Single Dummy Trim SCL25597 INDENT Finish Description Price Rebate Kit L23641 31.00 32mm Standard Strike SLP16541 41.00 55mm Extended Strike SLP17158 41.00 60mm Springlatch SLP15500 53.50 70mm Springlatch SLP15502 53.50 95mm Springlatch SLP15504 58.50 60mm Deadlatch SLP15550 58.50 70mm Deadlatch SLP15552 58.50 95mm Deadlatch SLP15554 65.50 127mm Deadlatch SLP15557 74.50 All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C17
Legge G2 Series COMMERCIAL Locks & Latches 10 year mechanical warranty Backset: Deadbolt - 60/70mm adjustable Orbit & Neptune - 70mm standard, 60mm and 127mm available Fire Rated: Refer fire door manufacturer for approval Deadbolt Finish Description Price Door Thickness: 32mm to 50mm G160 Single Cylinder & Turn Deadbolt G2BOLTSCS 55.00 G162 Double Cylinder Deadbolt G2BOLTDCS 62.50 Orbit Finish Description SSS Price Door Thickness: 32mm to 50mm G50PD Entrance Lock G2OENTS 57.50 Neptune Finish Description Price Door Thickness: 32mm to 50mm G10S Passage Latch G2NPASS 116.00 G40S Privacy Latch G2NPRIS 135.00 G50PD Entrance Lock G2NENTS 143.00 G66PD Entrance Lock Double Cylinder G2NDCENTS 152.00 G70PD Classroom Lock G2NCLASS 143.00 G80PD Storeroom Lock G2NSTRS 143.00 G170 Single Dummy Trim G2NDUMS 56.00 Door Thickness: 45mm to 60mm G10S Passage Latch G2NPASTS 209.00 G50PD Entrance Lock G2NENTTS 262.00 Accessories G70PD Classroom Lock G2NCLASTS 262.00 Finish Description Price 60mm Deadlatch G2-60DLS 19.00 60mm Springlatch G2-60SLS 19.00 127mm Extension Kit (Latch required) G3-127DLS 34.00 Universal Rebate Kit SRL14340 15.50 C18 www.allegion.co.nz Customer Service Auckland: Ph 829 0553 National: Ph 0800 477 869
Schlage Tubular Latches 10 year mechanical warranty Note: Bolt through fixing for lever furniture 38mm to 41mm. Not suitable for unsprung door furniture Description 3722 Light Commercial Tubular Latch - 60mm Backset 12002 Light Commercial Tubular Latch -60mm Backset Spindle Size (mm) Finish Code Price 7.6 SSS L3722SB 17.00 8 SSS DAX12002SSS-02 14.00 COMMERCIAL Locks & Latches Privacy Latch - 70mm Backset 7.6 SSS SRP32991 34.00 Passage Latch - 70mm Backset 7.6 SSS SRP32992 32.50 Universal Rebate Kit SRL14340 15.50 12081 Tubular Bolt (Suit star spindle) 4.5 SSS DAX12081SSS-01 13.50 Star Spindle Brass 4.5 x 85mm ZSS 2.30 Schlage 950 Series Short Backset Deadlocks 10 year mechanical warranty Door Thickness: 32mm to 50mm Bolt Throw: 950L - 37mm, 951-28mm Model Description Finish Code Price 950L-1 Deadlock 23mm Single Cylinder with Turn, Double Cylinder, Strike and Alum Forend SCL10344 93.50 951-1 Sliding 23mm Deadlock Single Cylinder with Turn, Double Cylinder, Self latching Strike and Alum Forend 951-4 Dual 30mm Deadlock and Sliding Deadlock. Single Cylinder with Turn, Double Cylinder, Self latching Strike and Wooden Forend SCL10356 93.50 SCL10360 208.00 Accessories Model Description Finish Code Price Strike Plate Wood 200x25mm SCL10348 8.30 All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C19
Schlage B250 Series Deadbolts COMMERCIAL Cylinders Locks & Latches & Keying 10 year mechanical warranty Door Thickness: 35mm to 44mm Backset: 70mm standard, 60mm available Accessories & Parts Finish Description Price B250PD Single Cylinder & Turn Nightlatch SCL13088 INDENT Finish Description Price 60mm Latchbolt SLP17477 INDENT 70mm Latchbolt SLP23573 INDENT Rebate Kit Suit B60, B250, B500 SLP23674 88.00 Legge Nightlatch Finish Description SSS Price 454 Nightlatch Less Cylinder L454SSS 58.50 Accessories & Parts Finish Description Price 66 Nightlatch Cylinder L66S INDENT C20 www.allegion.co.nz Customer Service Auckland: Ph 829 0553 National: Ph 0800 477 869
Schlage Padlocks Features and benefits: Meet or exceed ASTM standards for standard steel shackle, corrosion resistance Molybdenum hardened steel shackle offers greater cut resistance, conventional key-in-knob cylinder. Material: Solid brass body resists corrosion for all-weather performance Description Code Price Schlage 23 Series Brass Padlock 38mm X 8mm KR-KS23D2300 79.00 COMMERCIAL Locks Cylinders & Latches & Keying Schlage 23 Series Brass Padlock 51mm X 8mm KR-KS23F2300 89.00 Schlage 23 Series Brass Padlock 38mm X 8mm (Includes SR1 PD Cylinder Master Keyed with two keys) SR1-KS23D2300 162.00 Schlage 43 Series Gate Padlock with Chain 51mm X 9.5mm KR-KS43F2300-CR 129.00 Schlage 72 Series Steel Padlock 51mm X 11mm KR-KS72F2300 119.00 Schlage Locking Cable Key-in-knob cylinder 1.8mm X 15mm KR-KC215E220 229.00 Accessories Note: To change the shackle size to 102mm, standard padlock needs to be orderd along with the shackle KR-KZ11G20 Description Code Price Schlage 23 Series Steel Shackle 102mm X 8mm KR-KZ11G20 19.00 Schlage Key Retaining Locking Cam KR-KZ32CB1 4.00 All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C21
Schlage SR Restricted Keying System COMMERCIAL Cylinders Locks & Latches & Keying Note: Included in the price of cylinders is the surcharge for Master keying (MK) or Keying Alike (KA) to any level and stamping of the cylinder. All cylinders are supplied with a quantity of 2 keys per change, including cutting, stamping and colour identification studs. The default colours are: Master Keys = Red; Change Keys = Blue. Please refer to Schlage SR technical data sheet to select and specify alternative colours. Warranty information: 10 year mechanical warranty Finish Description Price Master Keyed Oval Cylinders 6 Pin Oval Cylinder - SR1 Keyway SR1-OVAL- 90.00 6 Pin Extended Oval Cylinder (50mm) - SR1 Keyway SR1-OVAL-EXT- 120.00 Master Keyed PD Cylinders 6 Pin PD Cylinder - SR1 Keyway SR1-PD- 100.00 Master Keyed Rim Cylinders 6 Pin Rim Cylinder - SR1 Keyway SR1-RIM- 100.00 Master Keyed Round Mortice Cylinders 6 Pin Round Mortice Cylinder - SR1 Keyway SR1-MORTICE- 120.00 Master Keyed Euro Cylinders 6 Pin Euro Lazy Cam Double Cylinder - SR1 Keyway SR1-EURO-LC- 160.00 6 Pin Euro Fixed Cam Double Cylinder - SR1 Keyway SR1-EURO-FC- 160.00 6 Pin Euro Fixed Cam Single Cylinder & Turn - SR1 Keyway SR1-EURO-CT- 140.00 6 Pin Euro Fixed Cam Half Cylinder- SR1 Keyway SR1-EURO-HC- 100.00 Schlage Cylinders Note: Cylinders are in Classic keyway and supplied with 2 keys Finish Description Price A Series 5 Pin Standard Cylinder SLP15932 67.00 A Series 6 Pin Standard Cylinder SLP15940 67.00 A Series 6 Pin Orbit Cylinder SLP16819 67.00 Oval Cylinder 6 Pin Cylinder L17362C 73.50 Rim Cylinder 6 Pin Cylinder SLP26015 110.00 Round Mortice 6 Pin Cylinder SLP26009 110.00 C22 www.allegion.co.nz Customer Service Auckland: Ph 829 0553 National: Ph 0800 477 869
Legge Cylinders Note: Cylinders are supplied with 2 keys. Allow 15 working days for NON- finishes minimum order charges may apply. Finishes Description ABZ ORB SBC CP PB Price Standard Oval Cylinder C4 Keyway (Suit door thickness 32mm to 50mm) Extended Oval Cylinder C4 Keyway (Suit door thickness 51mm to 65mm) Z990300 40.00 Z990303 Z990305 Z990304 Z990301 Z990302 60.00 Z990235 80.00 Z990237 Z990240 Z990238 Z990236 Z990239 100.00 COMMERCIAL Cylinders Locks & Latches & Keying Schlage Key Blanks Description Code Price SR1 Cut Keys Z-LK3-KC 15.00 Schlage Key, 5 Pin Classic C Keyway Z35-100C 2.40 Schlage Key, 5 Pin Classic E Keyway Z35-100E 2.40 Schlage Key, 6 Pin Classic C Keyway Z35-101C 2.60 Schlage Key, 6 Pin Classic E Keyway Z35-101E 2.60 Schlage Large Bow Key, 6 Pin E Keyway Z35-141E 10.00 Legge Keying Note: The following charges are applicable to Legge oval cylinders and all Schlage pin tumbler locks Description Code Price Master Keying Charge C, E & C4 Keyway LK1 30.00 Master Keying Charge F, S, D & Q Keyway LK2 30.00 Keying Alike Charge LK3 30.00 Construction Keying Charge LK4 30.00 Key or Cylinder Stamping Charge LK6 10.00 Cut Key C, E & C4 Keyway LK7 10.00 Cut Key F, S, D & Q Keyway LK8 10.00 Restricted Key Cutting Charge LK21 10.00 1. Keying charges are per cylinder 2. Keying alike charges do not apply to the first cylinder in each keyed alike group 3. A master keying charge covers all levels of keying eg: KA, KD, MK, GMK, GGMK, MAIS 4. A master keying charge includes stamping of cylinder and keys 5. Master keyed cylinders are supplied with 2 keys per change and 2 master keys per master keyed group unless otherwise ordered 6. Construction cylinders are supplied with 4 keys per group All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C23
Legge Levers COMMERCIAL Door Furniture Price Code 1 #29 Alpha #55 Alessandro LH/RH #57 Angelo Bergen #51 Chagall LH/RH #15 Diablo Flaire #12 Leonardo #50 Monet #52 Renoir C24 www.allegion.co.nz Customer Service Auckland: Ph 829 0553 National: Ph 0800 477 869
Legge Levers Price Code 1 #27 Salvador COMMERCIAL Door Furniture Price Code 2 #59 Cisa #62 Ergo Neptune Omega #56 Rubens #61 Trilo All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C25
Legge 67 Series Ordering Procedure COMMERCIAL Door Furniture Ordering procedure for Alpha, Bergen, Flaire, Neptune & Omega designs L A 67L S Brand Lever Design Rose Function Finish Code Legge...L Alpha... A Bergen...B Flaire...F Neptune... N Omega.... O Latch Furniture...67 LR Lock / Latch Furniture... 67L External Half Set...67LE Internal Half Set...67LI Satin Chrome..... S Chrome Plate... C Polished Brass...P Satin Black Chrome... SBC Oil Rubbed Bronze...ORB Antique Brass. ABZ 1. Lever Design Select the desired lever design e.g. Alpha....LA 2. Rose Function Select the required rose function e.g. LR Lock/Latch Furniture... LA67L 3. Finish Select the desired finish e.g. Satin Chrome...LA67LS Ordering procedure for all other lever designs L67 /51 L L E S Brand/Series Lever Design Rose Function Hand Rose Function Finish Code Code Legge... L67 refer pages C24-C25 Latch Furniture............ leave blank LR Lock / Latch Furniture...L Non Handed.............. leave blank Right Hand...R Left Hand.......... L Leave blank if full set is required External Half Set. E Internal Half Set...I Satin Chrome..... S Chrome Plate... C Polished Brass...P Satin Black Chrome... SBC Oil Rubbed Bronze...ORB Antique Brass. ABZ 1. Brand Series Nominate the series... L67 2. Lever Design Select the desired lever design e.g. # 51 Chagall... L67/51 3. Rose Function Select the required rose function e.g. LR Lock/Latch Furniture... L67/51L 4. Hand If the lever design is asymmetrical select the required hand e.g. Left Hand... L67/51LL 5. Rose Function If a half set is required select the required side e.g. External half set.... L67/51LLE 6. Finish Select the desired finish e.g. Satin Chrome... L67/51LLES C26 www.allegion.co.nz Customer Service Auckland: Ph 829 0553 National: Ph 0800 477 869
Legge 800 Series Ordering Procedure L A 802 R S Brand Lever Design Plate Function Hand Finish Code Legge...L Alpha... A Bergen...B refer following pages Right Hand...R Left Hand.......... L 1. Lever Design Select the desired lever design e.g. Alpha.... LA 2. Plate Function Select the required plate function e.g. 802 external plate with cylinder hole.... LA802 3. Hand If the lever design is asymmetrical select the required hand e.g. Right Hand... LA802R 4. Finish Select the desired finish e.g. Satin Chrome... LA802RS Satin Chrome..... S COMMERCIAL Door Furniture All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C27
Legge 6000 Series Ordering Procedure COMMERCIAL Door Furniture L 6002 /51 R S Brand Rose Function Lever Design Hand Finish Code Legge...L Lever Furniture... 6000 Half Set... 6001 Fixed Half Set... 6002 Passage Set.. 6005 Privacy Set... 6006 Bergen...B Flaire...F Neptune... N refer pages C24-C25 Non Handed...leave blank Right WWHand...R Left Hand.......... L Satin Chrome..... S Chrome Plate... C Polished Brass...P Satin Black Chrome... SBC Oil Rubbed Bronze...ORB Antique Brass. ABZ 1. Rose Function Select the required rose function e.g. 6002 fixed half set... L6002 2. Lever Design Select the desired lever design e.g. # 51 Chagall.... L6002/51 3. Hand If the lever design is asymmetrical select the required hand e.g. Right Hand... L6002/51R 4. Finish Select the desired finish e.g. Satin Chrome... L6002/51RS Legge 8000 Series Ordering Procedure L 8002 /51 R S Brand Rose Function Lever Design Hand Finish Code Legge...L Lever Furniture... 6000 Half Set... 6001 Fixed Half Set... 6002 Passage Set.. 6005 Privacy Set... 6006 Bergen...B Flaire...F Neptune... N refer pages C24-C25 Non Handed...leave blank Right WWHand...R Left Hand.......... L Satin Chrome..... S Chrome Plate... C 1. Rose Function Select the required rose function e.g. 8000 fixed half set... L8000 2. Lever Design Select the desired lever design e.g. # 51 Chagall.... L8002/51 3. Hand If the lever design is asymmetrical select the required hand e.g. Right Hand... L8005/51R 4. Finish Select the desired finish e.g. Satin Chrome... L8006/51RS C28 www.allegion.co.nz Customer Service Auckland: Ph 829 0553 National: Ph 0800 477 869
Legge 500 & 700 Series Ordering Procedure Ordering procedure for Alpha, Bergen, Flaire, Neptune & Omega designs L A 502 S Brand Lever Design Plate Function Finish Code Legge...L Alpha... A Bergen...B Flaire...F Neptune... N Omega.... O refer following pages Satin Chrome..... S Chrome Plate... C Polished Brass...P Satin Black Chrome... SBC Oil Rubbed Bronze...ORB Antique Brass. ABZ COMMERCIAL Door Furniture 1. Lever Design Select the desired lever design e.g. Alpha... LA 2. Plate Function Select the required plate function e.g. 502 external plate with cylinder hole... LA502 3. Finish Select the desired finish e.g. Satin Chrome... LA502S Ordering procedure for all other lever designs L 502 /51 R S Brand Plate Function Lever Design Hand Finish Code Legge...L refer following pages refer pages C24-C25 Non Handed...leave blank Right Hand...R Left Hand.......... L Satin Chrome..... S Chrome Plate... C Polished Brass...P Satin Black Chrome... SBC Oil Rubbed Bronze...ORB Antique Brass. ABZ 1. Plate Function Select the required plate function e.g. 502 external plate with cylinder hole... L502 2. Lever Design Select the desired lever design e.g. # 51 Chagall.... L502/51 3. Hand If the lever design is asymmetrical select the required hand e.g. Right Hand... L502/51R 4. Finish Select the desired finish e.g. Satin Chrome... L502/51RS All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C29
Legge 5300 & 5400 Series Ordering Procedure COMMERCIAL Door Furniture L 5303 /51 R S M Brand Plate Function Lever Design Hand Finish Lock Type Code Legge...L refer following pages Bergen...B Flaire...F Neptune... N refer pages C24-C25 Non Handed...leave blank Right Hand...R Left Hand.......... L Satin Chrome..... S Chrome Plate... C Polished Brass...P Satin Black Chrome... SBC Oil Rubbed Bronze...ORB Antique Brass. ABZ 995MF.. leave blank 990MF... M 1. Plate Function Select the required plate function e.g. 5303 internal plate with turn... L5303 2. Lever Design Select the desired lever design e.g. # 51 Chagall.... L5303/51 3. Hand If the lever design is asymmetrical select the required hand e.g. Right Hand... L5303/51R 4. Finish Select the desired finish e.g. Satin Chrome... L5303/51RS 5. Lock Type Nominate the non-standard lock type if required e.g. Legge 990MF Series... L5303/51RSM Lever & Backset Compatibility Lever 12 15 27 29 50 51 52 55 Min Backset 30mm 23mm 30mm 23mm 23mm 30mm 30mm 23mm Lever 56 57 58 61 62 Bergen Cisa Flaire Neptune Min Backset 38mm 30mm 30mm 30mm 30mm 30mm 23mm 30mm 30mm C30 www.allegion.co.nz Customer Service Auckland: Ph 829 0553 National: Ph 0800 477 869
Legge 67 Series 30 year mechanical warranty Door Thickness: 32mm to 55mm. Extended parts to suit 56mm to 75mm available (refer accessories pg C50) Note: Handing only required for half sets, refer page C26 for ordering procedure. Allow 10 working days for any product not in stock at time of order Allow 15 working days for NON- finishes minimum order charges may apply. Deadbolt Part Number Description Finishes Alpha Price Code 1 Price Code 2 67 Latch Furniture Set 188.00 225.00 194.00 235.00 231.00 279.00 COMMERCIAL Door Furniture 67L LR Lock/Latch Furniture Set 188.00 225.00 194.00 235.00 231.00 279.00 67LE External Half Set 97.00 117.00 101.00 122.00 117.00 140.00 67LI Internal Half Set 97.00 117.00 101.00 122.00 117.00 140.00 L67EBS External Blank Rose 51.00 61.50 L67IBS Internal Blank Rose 51.00 61.50 Escutcheons Part Number Description Finishes Price 22 Forged Brass Cylinder Hole 23 Forged Brass Turn 24 Forged Brass Emergency Release 26 Pressed Brass Cylinder Hole 27 Pressed Brass Turn 28 Pressed Brass Emergency Release 31.50 39.50 63.00 75.50 58.00 69.00 20.50 23.50 43.50 52.50 41.50 50.00 All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C31
COMMERCIAL Door Furniture Legge 6000 Series 10 year mechanical warranty Door Thickness: Lock/Latch: 32mm to 50mm, Passage: 32mm to 50mm, Privacy: 32mm to 42mm Note: Handing only required for half sets, refer page C28 for ordering procedure. Allow 10 working days for any product not in stock at time of order Allow 15 working days for NON- finishes minimum order charges may apply. Furniture Part Number Description Finishes Price Code 1 Price Code 2 6000 Lock/Latch Furniture Set 6001 Half Set 165.00 197.00 83.00 99.00 200.00 241.00 99.00 119.00 6002 Half Set Fixed 6003 Blank Rose 6005 Passage Set - 60mm Latch 6006 Privacy Set - 60mm Latch 83.00 99.00 49.50 59.00 183.00 219.00 223.00 268.00 99.00 119.00 217.00 260.00 258.00 308.00 Escutcheons Part Number Description Finishes Price 6007 Turn 6008 Cylinder 6009 Emergency Release 6010 Large Turn 6012 Euro Profile Cylinder 6013 Indicating Turn 6014 Indicating Emergency Release 6015 Indicating Large Turn 6054 Accessible Turn LH/RH 6054 Indicating Accessible Turn LH/RH 30.50 62.00 20.00 42.00 30.50 62.00 40.50 76.00 20.00 42.00 32.50 71.00 32.50 74.00 44.00 87.00 70.00 100.00 80.00 110.00 C32 www.allegion.co.nz Customer Service Auckland: Ph 829 0553 National: Ph 0800 477 869
Legge 8000 Series 10 year mechanical warranty Door Thickness: Lock/Latch: 32mm to 50mm, Passage: 32mm to 50mm, Privacy: 32mm to 42mm Note: Handing only required for half sets, refer page C28 for ordering procedure. Allow 10 working days for any product not in stock at time of order Allow 15 working days for NON- finishes minimum order charges may apply. Furniture Part Number Description Finishes Price Code 1 Price Code 2 8000 Lock/Latch Furniture Set CP 8001 Half Set CP 172.00 206.00 85.50 102.00 206.00 247.00 105.00 125.00 COMMERCIAL Door Furniture 8002 Half Set Fixed CP 8003 Blank Rose CP 8005 Passage Set - 60mm Latch CP 8006 Privacy Set - 60mm Latch CP 85.50 102.00 53.00 63.00 189.00 228.00 229.00 275.00 105.00 125.00 225.00 270.00 268.00 320.00 Escutcheons Part Number Description Finishes Price 8007 Turn CP 8008 Cylinder CP 8009 Emergency Release CP 8010 Large Turn CP 8012 Euro Profile Cylinder CP 8013 Indicating Turn CP 8014 Indicating Emergency Release CP 8015 Indicating Large Turn CP 8054 Accessible Turn LH/RH CP 8054 Indicating Accessible Turn LH/RH CP 57.00 68.50 38.00 46.50 57.00 68.50 69.50 83.00 38.00 46.50 64.00 78.00 66.50 80.00 78.00 93.50 90.00 110.00 100.00 120.00 All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C33
COMMERCIAL Door Furniture
Legge 500 Series 30 year mechanical warranty Door Thickness: 32mm to 55mm. Extended parts to suit 56mm to 75mm available (refer accessories pg C50) Note: LED plug suits FSH FEL990 Electric Mortice Lock. Adapter required for use with other manufacturers locks Handing only required for half sets, refer page C29 for ordering procedure. Allow 10 working days for any product not in stock at time of order Allow 15 working days for NON- finishes minimum order charges may apply Sash Lock Part Number Description Finishes Alpha Price Code 1 Price Code 2 500 Key Hole Sash Lock Furniture 261.00 318.00 261.00 318.00 323.00 382.00 COMMERCIAL Door Furniture External Part Number Euro Profile Sash Lock Furniture 261.00 318.00 261.00 318.00 323.00 382.00 Description Finishes Alpha Price Code 1 Price Code 2 502 Plate with Cylinder Hole 144.00 114.00 137.00 123.00 148.00 150.00 180.00 502LED Plate with Cylinder Hole & LED (Refer Note) 157.00 189.00 167.00 200.00 194.00 235.00 503 Plain Plate Furniture 114.00 137.00 123.00 148.00 150.00 180.00 503LED Plain Plate Furniture & LED (Refer Note) 157.00 189.00 167.00 200.00 194.00 235.00 504 Plate with Emergency Release 140.00 168.00 149.00 179.00 180.00 217.00 504IND Plate with Indicating Emergency Release 166.00 198.00 172.00 210.00 203.00 246.00 505 Plate with Turn 140.00 168.00 149.00 179.00 180.00 217.00 505IND Plate with Indicating Turn 165.00 198.00 172.00 210.00 203.00 246.00 535 Plate with Large Turn 179.00 216.00 202.00 244.00 235.00 280.00 535IND Plate with Indicating Large Turn 202.00 244.00 227.00 273.00 260.00 310.00 506 Plate Only with Cylinder Hole 71.00 73.50 86.00 89.00 73.50 89.00 508 Plain Plate Only 71.00 73.50 86.00 89.00 73.50 89.00 509 Plate Only with Emergency Release 100.00 104.00 120.00 124.00 104.00 124.00 510 Plate Only with Turn 100.00 104.00 120.00 124.00 104.00 124.00 All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C35
COMMERCIAL Door Furniture Legge 500 Series 30 year mechanical warranty Door Thickness: 32mm to 55mm. Extended parts to suit 56mm to 75mm available (refer accessories pg C50) Note: Handing only required for half sets, refer page C29 for ordering procedure. Allow 10 working days for any product not in stock at time of order Allow 15 working days for NON- finishes minimum order charges may apply. Internal Part Number Description Finishes Alpha Price Code 1 Price Code 2 511 Plate with Cylinder Hole 114.00 137.00 123.00 148.00 150.00 180.00 512 Plain Plate Furniture 114.00 137.00 123.00 148.00 150.00 180.00 513 Plate with Emergency Release 140.00 168.00 149.00 179.00 180.00 217.00 513IND Plate with Indicating Emergency Release 165.00 198.00 172.00 210.00 203.00 246.00 514 Plate with Turn 140.00 168.00 149.00 179.00 180.00 217.00 514IND Plate with Indicating Turn 165.00 198.00 172.00 210.00 203.00 246.00 534 Plate with Large Turn 179.00 216.00 202.00 244.00 235.00 280.00 534IND Plate with Indicating Large Turn 202.00 244.00 227.00 273.00 260.00 310.00 554 Plate with Accessible Turn LH/RH 210.00 249.00 239.00 237.00 268.00 323.00 554IND Plate with Indicating Accessible Turn LH/RH 231.00 279.00 263.00 318.00 294.00 353.00 515 Plate Only with Cylinder Hole 73.50 89.00 516 Plain Plate Only 73.50 89.00 517 Plate Only with Emergency Release 104.00 124.00 518 Plate Only with Turn 104.00 124.00 C36 www.allegion.co.nz Customer Service Auckland: Ph 829 0553 National: Ph 0800 477 869
Legge 500 Anti-Hang Series 30 year mechanical warranty Door Thickness: 32mm to 55mm. Extended parts to suit 56mm to 75mm available (refer accessories pg C50) Note: For plain plates to be used with Legge 500 anti-hang series furniture, refer page C35-36. Handing only required for half sets, refer page C29 for ordering procedure. Allow 10 working days for any product not in stock at time of order Allow 15 working days for NON- finishes minimum order charges may apply. External Part Number Description Finishes Price 502AH Plate with Cylinder Hole 242.00 290.00 COMMERCIAL Door Furniture 503AH Plain Plate Furniture 242.00 290.00 504AH Plate with Emergency Release 280.00 341.00 Internal Part Number Description Finishes Price 511AH Plate with Cylinder Hole 242.00 290.00 512AH Plain Plate Furniture 242.00 290.00 514AH Plate with Emergency Release 280.00 341.00 Accessories Part Number Description Finish Price LLP80005 Triwing Security Screw SSS 13.50 All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C37
COMMERCIAL Door Furniture Legge 500 Anti-Vandal Series 30 year mechanical warranty Door Thickness: 32mm to 55mm. Extended parts to suit 56mm to 75mm available (refer accessories pg C50) Note: For Plain Plates to be used with Legge 500 anti-vandal series furniture, refer page C35-36. Handing only required for half sets, refer page C29 for ordering procedure. Allow 10 working days for any product not in stock at time of order Allow 15 working days for NON- finishes minimum order charges may apply. External Part Number Description Finishes Price 502AV Plate with Cylinder Hole 182.00 218.00 503AV Plain Plate Furniture 182.00 218.00 504AV Plate with Emergency Release 204.00 247.00 Internal Part Number Description Finishes Price 511AV Plate with Cylinder Hole 182.00 218.00 512AV Plain Plate Furniture 182.00 218.00 514AV Plate with Turn 204.00 247.00 Accessories Part Number Description Finish Price LLP80005 Triwing Security Screw SSS 13.50 C38 www.allegion.co.nz Customer Service Auckland: Ph 829 0553 National: Ph 0800 477 869
Legge 700 Series 30 year mechanical warranty Door Thickness: 32mm to 55mm. Extended parts to suit 56mm to 75mm available (refer accessories pg C50) Note: LED plug suits FSH FEL990 Electric Mortice Lock. Adapter required for use with other manufacturers locks Handing only required for half sets, refer page C29 for ordering procedure. Allow 10 working days for any product not in stock at time of order Allow 15 working days for NON- finishes minimum order charges may apply. Sash Lock Part Number Description Finishes Alpha Price Code 1 Price Code 2 700 Key Hole Sash Lock Furniture 261.00 318.00 261.00 318.00 323.00 382.00 COMMERCIAL Door Furniture External Part Number Euro Profile Sash Lock Furniture 261.00 318.00 261.00 318.00 323.00 382.00 Description Finishes Alpha Price Code 1 Price Code 2 702 Plate with Cylinder Hole 702LED Plate with Cylinder Hole & LED 703 Plain Plate Furniture 703LED Plain Plate Furniture & LED 704 Plate with Emergency Release 704IND Plate with Indicating Emergency Release 705 Plate with Turn 705IND Plate with Indicating Turn 735 Plate with Large Turn 735IND Plate with Indicating Large Turn 706 Plate Only with Cylinder Hole 114.00 137.00 157.00 189.00 114.00 137.00 157.00 189.00 140.00 168.00 165.00 198.00 140.00 168.00 165.00 198.00 179.00 216.00 202.00 244.00 73.50 89.00 123.00 148.00 167.00 200.00 123.00 148.00 167.00 200.00 149.00 179.00 172.00 210.00 149.00 179.00 172.00 210.00 202.00 244.00 227.00 273.00 150.00 180.00 194.00 235.00 150.00 180.00 194.00 180.00 180.00 217.00 203.00 246.00 180.00 217.00 203.00 246.00 235.00 280.00 260.00 310.00 708 Plain Plate Only 73.50 89.00 709 Plate Only with Emergency Release 104.00 124.00 710 Plate Only with Turn 104.00 124.00 All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C39
COMMERCIAL Door Furniture Legge 700 Series 30 year mechanical warranty Door Thickness: 32mm to 55mm. Extended parts to suit 56mm to 75mm available (refer accessories pg C50) Note: Handing only required for half sets, refer page C29 for ordering procedure. Allow 10 working days for any product not in stock at time of order Allow 15 working days for NON- finishes minimum order charges may apply. Internal Part Number Description Finishes Alpha Price Code 1 Price Code 2 711 Plate with Cylinder Hole 114.00 137.00 123.00 148.00 150.00 180.00 712 Plain Plate Furniture 114.00 137.00 123.00 148.00 150.00 180.00 713 Plate with Emergency Release 140.00 168.00 149.00 179.00 180.00 217.00 713IND Plate with Indicating Emergency Release 165.00 198.00 172.00 210.00 203.00 246.00 714 Plate with Turn 140.00 168.00 149.00 179.00 180.00 217.00 714IND Plate with Indicating Turn 165.00 198.00 172.00 210.00 203.00 246.00 734 Plate with Large Turn 179.00 216.00 202.00 244.00 235.00 280.00 734IND Plate with Indicating Large Turn 202.00 244.00 227.00 273.00 260.00 310.00 754 Plate with Accessible Turn LH/RH 210.00 249.00 239.00 287.00 268.00 323.00 754IND Plate with Indicating Accessible Turn LH/RH 231.00 279.00 263.00 318.00 294.00 353.00 715 Plate Only with Cylinder Hole 73.50 89.00 716 Plain Plate Only 73.50 89.00 717 Plate Only with Emergency Release 104.00 124.00 718 Plate Only with Turn 104.00 124.00 C40 www.allegion.co.nz Customer Service Auckland: Ph 829 0553 National: Ph 0800 477 869
Legge 700 Anti-Hang Series 30 year mechanical warranty Door Thickness: 32mm to 55mm. Extended parts to suit 56mm to 75mm available (refer accessories pg C50) Note: For plain plates to be used with Legge 700 anti-hang series furniture, refer page C39-40. Allow 10 working days for any product not in stock at time of order. Handing only required for half sets, refer page C29 for ordering procedure. Allow 10 working days for any product not in stock at time of order Allow 15 working days for NON- finishes minimum order charges may apply. External Part Number Description Finishes Price 702AH Plate with Cylinder Hole 242.00 290.00 COMMERCIAL Door Furniture 703AH Plain Plate Furniture 242.00 290.00 704AH Plate with Emergency Release 280.00 341.00 Internal Part Number Description Finishes Price 711AH Plate with Cylinder Hole ORB, 242.00 290.00 712AH Plain Plate Furniture ORB, 242.00 290.00 714AH Plate with Turn ORB, 280.00 341.00 Accessories Part Number Description Finish Price LLP80005 Triwing Security Screw SSS 13.50 All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C41
COMMERCIAL Door Furniture Legge 700 Anti-Vandal Series 30 year mechanical warranty Door Thickness: 32mm to 55mm. Extended parts to suit 56mm to 75mm available (refer accessories pg C50) Note: Allow 10 working days for product not in stock at time of order. For plain plates to be used with Legge 700 anti-vandal series furniture, refer page C39-40. Allow 10 working days for any product not in stock at time of order. Allow 15 working days for special finish orders. Minimum order charges may apply. External Part Number Description Finishes Price 702AV Plate with Cylinder Hole 182.00 218.00 703AV Plain Plate Furniture 182.00 218.00 704AV Plate with Emergency Release 204.00 247.00 Internal Part Number Description Finishes Price 711AV Plate with Cylinder Hole 182.00 218.00 712AV Plain Plate Furniture 182.00 218.00 714AV Plate with Turn 204.00 247.00 Accessories Part Number Description Finish Price LLP80005 Triwing Security Screw SSS 13.50 C42 www.allegion.co.nz Customer Service Auckland: Ph 829 0553 National: Ph 0800 477 869
Legge 700 Marine Series 30 year mechanical warranty Features & Benefits: 316L grade stainless steel Door thickness: 32mm to 55mm. Extended parts to suit 56mm to 75mm available (refer accessories pg C50) Note: Only available in Alpha lever design. External Code Description Finish Price LA702SSS Plate with Cylinder Hole SSS 132.00 COMMERCIAL Door Furniture LA703SSS Plain Plate Furniture SSS 132.00 LA704INDSSS Plate with Indicating Emergency Release SSS 191.00 L706SSS Plate Only with Cylinder Hole SSS 86.00 L708SSS Plain Plate Only SSS 86.00 Internal Code Description Finish Price LA711SSS Plate with Cylinder Hole SSS 132.00 LA712SSS Plain Plate Furniture SSS 132.00 LA714SSS Plate with Turn SSS 162.00 LA754LINDSSS LA754RINDSSS Plate with Indicating Accessible Turn LH Plate with Indicating Accessible Turn RH SSS SSS 269.00 269.00 All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C43
COMMERCIAL Door Furniture Legge 800 Series 30 year mechanical warranty Door Thickness: 32mm to 55mm. Extended parts to suit 56mm to 75mm available (refer accessories pg C50) Note: Allow 10 working days for product not in stock at time of order Refer page C27 for ordering procedure External Part Number Description Finish Alpha 802 Plate with Cylinder Hole LH/RH 260.00 803 Plain Plate Furniture LH/RH 260.00 804 Plate with Emergency Release LH/RH 275.00 804IND Plate with Indicating Emergency Release LH/RH 299.00 805 Plate with Turn LH/RH 275.00 806 Plate Only with Cylinder Hole LH/RH 179.00 808 Plain Plate Only 179.00 809 Plate Only with Emergency Release LH/RH 203.00 810 Plate Only with Turn LH/RH 203.00 819 Plate & Pull with Cylinder Hole LH/RH 230.00 820 Plain Plate & Pull LH/RH 230.00 821 Plate & Pull with Emergency Release LH/RH 257.00 822 Plate & Pull with Turn LH/RH 257.00 854 Plate with Indicating Accessible Turn LH/RH 364.00 C44 www.allegion.co.nz Customer Service Auckland: Ph 829 0553 National: Ph 0800 477 869
Legge 800 Series 30 year mechanical warranty Door Thickness: 32mm to 55mm. Extended parts to suit 56mm to 75mm available (refer accessories pg C50) Note: Allow 10 working days for product not in stock at time of order Refer page C27 for ordering procedure Internal Part Number Description Finish Alpha 811 Plate with Cylinder Hole LH/RH 260.00 COMMERCIAL Door Furniture 812 Plain Plate Furniture LH/RH 260.00 813 Plate with Emergency Release LH/RH 275.00 813IND Plate with Indicating Emergency Release LH/RH 299.00 814 Plate with Turn LH/RH 275.00 834 Plate with Large Turn LH/RH 318.00 834IND Plate with Large Turn Indicating LH/RH 335.00 854IND Plate with Indicating Accessible Turn LH/RH 364.00 815 Plate Only with Cylinder Hole LH/RH 179.00 816 Plain Plate Only 179.00 817 Plate Only with Emergency Release LH/RH 203.00 818 Plate Only with Turn LH/RH 203.00 823 Plate & Pull with Cylinder Hole LH/RH 230.00 824 Plain Plate & Pull LH/RH 230.00 825 Plate & Pull with Emergency Release LH/RH 257.00 826 Plate & Pull with Turn LH/RH 257.00 827 Plate & Pull with Turn Nightlatch LH/RH 257.00 All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C45
COMMERCIAL Door Furniture Legge 5300 Series 30 year mechanical warranty Door Thickness: 32mm to 50mm. Extended parts to suit 51mm to 75mm available (refer accessories pg C50) Note: Designed to suit Legge 995 series Mortice Lock. Modified plate to suit Legge 990 series Mortice Lock available. Handing only required for half sets, refer page C30 for ordering procedure. Allow 10 working days for any product not in stock at time of order Allow 15 working days for NON- finishes minimum order charges may apply. External Part Number Description Finishes Alpha Price Code 1 Price Code 2 5300 Plate with Cylinder Hole 145.00 172.00 161.00 192.00 192.00 229.00 5304 Plate with Emergency Release 169.00 203.00 188.00 225.00 202.00 244.00 5305 Plain Plate Furniture 145.00 172.00 161.00 192.00 192.00 229.00 5310 Plate with Cylinder Hole 96.00 115.00 5314 Plate Only with Emergency Release 109.00 131.00 5315 Plain Plate Only 96.00 115.00 Internal Part Number Description Finishes Alpha Price Code 1 Price Code 2 5301 Plate with Cylinder Hole 145.00 172.00 161.00 192.00 192.00 229.00 5303 Plate with Turn 169.00 203.00 188.00 225.00 202.00 244.00 5306 Plain Plate Furniture 145.00 172.00 161.00 192.00 192.00 229.00 5311 Plate with Cylinder Hole 96.00 115.00 5313 Plate with Turn 109.00 131.00 5316 Plain Plate Only 96.00 115.00 5353 Plate with Accesible Turn LH/RH 231.00 279.00 256.00 306.00 306.00 368.00 C46 www.allegion.co.nz Customer Service Auckland: Ph 829 0553 National: Ph 0800 477 869
Legge 5300 Marine Series 30 year mechanical warranty Features & Benefits: 316 grade stainless steel Door Thickness: 32mm to 55mm. Extended parts to suit 56mm to 75mm available (refer accessories pg C50) Note: Only available in Alpha lever design. External Code Description Finish Price L5300/29SSS Plate with Cylinder Hole SSS 166.00 COMMERCIAL Door Furniture L5304/29SSS Plate with Emergency Release SSS 196.00 L5305/29SSS Plain Plate Furniture SSS 166.00 L5310SSS Plate Only with Cylinder Hole SSS 111.00 L5315SSS Plain Plate Only SSS 111.00 Internal Code Description Finish Price L5301/29SSS Plate with Cylinder Hole SSS 166.00 L5303/29SSS Plate with Turn SSS 196.00 L5306/29SSS Plain Plate Furniture SSS 166.00 L5313SSS Plate Only with Turn SSS 126.00 L5316SSS Plain Plate Only SSS 111.00 L5353/29LSSS L5353/29RSSS Plate with Accessible Turn LH Plate with Accessible Turn RH SSS SSS 269.00 269.00 All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C47
Legge 5400 Series 30 year mechanical warranty Door Thickness: 32mm to 50mm. Extended parts to suit 51mm to 75mm available (refer accessories pg C50) Note: Designed to suit Legge 995 series Mortice Lock. Modified plate to suit Legge 990 series Mortice Lock available. Handing only required for half sets, refer page C30 for ordering procedure and backset compatibility. Allow 10 working days for any product not in stock at time of order. Allow 15 working days for NON- finishes minimum order charges may apply. External Part Number Description Finishes Alpha Price Code 1 Price Code 2 5400 Plate with Cylinder Hole 145.00 172.00 161.00 192.00 192.00 229.00 COMMERCIAL Door Furniture 5404 Plate with Emergency Release 169.00 202.00 188.00 225.00 202.00 244.00 5405 Plain Plate Furniture 145.00 172.00 161.00 192.00 192.00 229.00 5410 Plate with Cylinder Hole 96.00 115.00 5414 Plate Only with Emergency Release 109.00 131.00 5415 Plain Plate Only 96.00 115.00 Internal Part Number Description Finishes Alpha Price Code 1 Price Code 2 5401 Plate with Cylinder Hole 145.00 172.00 161.00 192.00 192.00 229.00 5403 Plate with Turn 169.00 203.00 188.00 225.00 202.00 244.00 5406 Plain Plate Furniture 145.00 172.00 161.00 192.00 192.00 229.00 5411 Plate with Cylinder Hole 96.00 115.00 5413 Plate with Turn 109.00 131.00 5416 Plain Plate Only 96.00 115.00 5453 Accessible Turn LH/RH 231.00 279.00 256.00 306.00 306.00 368.00 All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C49
Legge Commercial Furniture Accessories COMMERCIAL Door Entrance Furniture Handles Description Min. Order Qty Finishes Code Price Circlips 10 Z1400/14CC 1.90 Springs 10 Z788SP 2.70 Rotors 10 Z788R 1.30 Rotor Stops 10 Z788BST 2.70 Stop Screw 10 ZMCP4BA14Z 0.70 Standard Screws 3 x 5/32 10 PB ZMRPX5324 4.30 Standard Screws 3 x 5/32 10 SS ZMRPX5323 2.90 Extended Screws 4 x 5/32 10 SS LLP80001 8.50 Triwing Security Screws 3 x 5/32 10 SS LLP80005 13.50 Brass Star Spindle 85mm ZSS 2.30 6000 Series Rose Cap Z600102 10.00 6000 Series Rose Cap CP Z600100 12.00 6000 Series Rose Cap PB Z600101 12.00 6000 Series Privacy Rose Cap Z600202 11.00 6000 Series Privacy Rose Cap CP Z600200 13.50 6000 Series Privacy Rose Cap PB Z600201 13.50 8000 Series Rose Cap Z800102 14.50 8000 Series Rose Cap CP Z800100 18.50 8000 Series Privacy Rose Cap Z800202 12.00 8000 Series Privacy Rose Cap CP Z800200 14.50 6000/8000 Series Passage Latch Kit Z6005S 35.50 6000/8000 Series Passage Latch Kit CP Z6005C 35.50 6000/8000 Series Passage Latch Kit PB Z6005P 35.50 6000/8000 Series Privacy Latch Kit ZCA030 36.50 6000/8000 Series Privacy Latch Kit CP ZCA029 36.50 6000/8000 Series Privacy Latch Kit PB ZCA031 36.50 C50 www.allegion.co.nz Customer Service Auckland: Ph 829 0553 National: Ph 0800 477 869
Legge Entrance Handles 304 grade stainless steel 10 year finish warranty Door Thickness: Timber or aluminium: 30-65mm, Glass 8-12mm Supplied for back to back fixing Note: Other sizes available on indent. Price & leadtime on application Model/Description Overall Length x Diameter (mm) 1192 Back to Back Handles 482 x 32 632 x 32 Fixing Centre (mm) 450 600 Code DAX1192SSS-01 DAX1192SSS-02 Price 209.00 240.00 COMMERCIAL Entrance Handles 1195 Back to Back Handles 450 x 32 600 x 32 250 400 DAX1195SSS-02 DAX1195SSS-03 204.00 240.00 1213 Back to Back Handles - 25mm Square Section 325 475 625 300 450 600 DAX1213SSS-01 DAX1213SSS-02 DAX1213SSS-03 188.00 212.00 238.00 1222 Back to Back Handles 332 x 32 482 x 32 632 x 32 300 450 600 DAX1222SSS-06 DAX1222SSS-07 DAX1222SSS-08 149.00 177.00 190.00 1231 Back to Back Handles 332 x 32 482 x 32 632 x 32 300 450 600 DAX1231SSS-03 DAX1231SSS-05 DAX1231SSS-06 170.00 204.00 217.00 1246 Back to Back Handles - 50mm x 25mm Section 325 625 300 600 DAX1246SSS-01 DAX1246SSS-03 217.00 280.00 1285 Offset Back to Back Handles 380 x 32 530 x 32 680 x 32 300 450 600 DAX1285SSS-01 DAX1285SSS-02 DAX1285SSS-03 270.00 325.00 370.00 All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C51
Legge 3160 Entrance Handles COMMERCIAL Entrance Handles 316 grade stainless steel 10 year finish warranty Door Thickness: Bolt through fixings suitable for doors up to 70mm thick Description Overall Length x Diameter (mm) Fixing centres 3161 Offset Back to Back Pull Handle 325 x 25 300 L3161SSS-30 189.00 Code Price 425 x 25 400 L3161SSS-40 209.00 625 x 25 600 L3161SSS-60 240.00 825 x 25 800 L3161SSS-80 275.00 Legge Entrance Handles - Fixing & Drilling Details Entrance Handle Fixing Options Description Alum/Timber Glass Price 32mmØ x 8mm Bolt Pair DAXF31SSS-A DAXF31SSS-G 24.00 38mmØ x 8mm Bolt Pair DAXF32SSS-A DAXF32SSS INDENT Standard Fixing Details Multi Fix - Timber, Metal or Glass Doors Drilling Details Timber Door Fixings Metal Door Fixings Glass Door Fixings Tube Size Hole Size Tube Size Hole Size Tube Size Hole Size 32mm DIAM 38mm DIAM 10mm 10mm 32mm DIAM 38mm DIAM 10mm 10mm 32mm DIAM 38mm DIAM 14mm 14mm Special Finish Options Electropolishing - Recommended for coastal or corrosive environments. Applies to select models only. Price on application. C52 www.allegion.co.nz Customer Service Auckland: Ph 829 0553 National: Ph 0800 477 869
COMMERCIAL Entrance Handles
COMMERCIAL Door Controls LCN 1461/1461T Series Surface Mounted Closers 30 year mechanical warranty Fire Rating: Backcheck standard, refer fire door manufacturer for approval Note: Formed Stainless Steel Cover available, price on application. Special Rust Inhibitor (SRI) pre-treatment available on indent, add $55.00 list per closer Model Description Finish Code Price 1461 REG Regular Closer Strength 1-6 ALUM LCC25113 477.00 1461 REG SRI Regular Closer Strength 1-6 SRI ALUM LCC25235 540.00 1461 HO Hold Open Closer Strength 1-6 ALUM LCC25230 565.00 1461 DA Delayed Action Closer Strength 1-6 ALUM LCC25231 515.00 1461 CNS Cush-N-Stop Closer Strength 1-6 ALUM LCC25227 545.00 1460T REG Regular Track Arm Closer Strength 2-4 ALUM LCC25232 625.00 1460T HO Hold Open Track Arm Closer Strength 2-4 ALUM LCC25233 695.00 Accessories 1461T REG Regular Track Arm Closer Strength 1-2 ALUM LCC25229 610.00 Model Description Finish Code Price 1460-18FC Adaptor Plate for Full Cover ALUM LCP30094 88.00 1460-18PAFC Drop Plate for Full Cover ALUM LCP30024 96.00 1460-30 Mounting Bracket LCP30219 9.20 1460-3049 Hold Open Arm ALUM LCP16657 214.00 1460-3077 Regular Arm ALUM LCP16681 146.00 1460-3077T Regular Track Arm ALUM LCP25057 138.00 1460-419 Flush Panel Adaptor ALUM LCP30054 72.50 1460-61 Blade Stop Spacer LCP25033 31.00 1460-62PA Parallel Arm Bracket LCP17221 54.50 1460-72FC Full Plastic Cover ALUM LCP30076 31.00 1460-SP Screw Pack (Wood and Machine Screw) LCP25113 36.50 1460T-SP Screw Pack (Wood and Machine Screw) LCP30028 36.50 1460-SB LCN TB Thru Sex Bolt 35mm 1/4 BSW Thread LCP25030 5.00 1461-HO-CNS LCN 1460 HO Cush Arm ALUM LCP25002 214.00 1460-4040-TS LCN 1460T/4040T 425 Track Roller Lock Screw LCP25050 1.00 1460T-ECS LCN 1460T End Cap Security Fixing Set LCP30200 12.00 1460-3038 LCN 3038 Track HO Application LCP30234 86.50 1460-3034H LCN 3034H Track Roller HO Application LCP30235 28.50 1460-169 LCN 169 Bumper Assembly HO Application LCP30236 30.00 1460-3054 LCN 3054 HO Clip LCP30237 38.00 C54 www.allegion.co.nz Customer Service Auckland: Ph 829 0553 National: Ph 0800 477 869
LCN 4031/4031T Series Surface Mounted Closers 30 year mechanical warranty Fire Rating: Backcheck standard, refer fire door manufacturer for approval Note: Formed Stainless Steel cover available, price on application. Special Rust Inhibitor (SRI) pre-treatment available on indent, add $55.00 list per closer Model Description Finish Code Price 4031 REG Regular Closer Strength 1-4 ALUM LCC25189 370.00 4031 HO Hold Open Closer Strength 1-4 ALUM LCC25190 447.00 4031T REG Regular Track Arm Closer Strength 1-3 ALUM LCC25191 477.00 4031T HO Hold Open Track Arm Closer Strength 1-3 ALUM LCC25192 520.00 COMMERCIAL Door Controls Accessories Model Description Finish Code Price 4030-18PA Drop Plate ALUM LCP25093 70.00 4030-72M Metal Cover ALUM LCP25143 34.50 4030-3077 Regular Arm Assembly ALUM LCP25092 92.50 4030-3049 Hold Open Arm Assembly ALUM LCP25091 180.00 4030-3077T Regular Track Arm ALUM LCP25090 109.00 4030-3038H LCN 3038 Track HO Application LCP30234 86.50 4030-3054 LCN 3054 HO Clip LCP30237 38.00 4030-SP Screw Pack (Wood and Machine Screw) LCP30010 29.00 4030T-SP Screw Pack (Wood and Machine Screw) LCP30011 37.50 LCN 4040XP/4040XPT Series Surface Mounted Closers 30 year mechanical warranty Fire Rating: Backcheck standard, refer fire door manufacturer for approval Note: Formed Stainless Steel cover available, price on application. Special Rust Inhibitor (SRI) pre-treatment available on indent, add $55.00 list per closer Model Description Finish Code Price 4040XP REG Regular Closer Strength 1-6 ALUM LCC24081 605.00 4040XP HO Hold Open Closer Strength 1-6 ALUM LCC24145 650.00 4041 DA Delayed Action Closer 1-6 ALUM LCC25320 650.00 4040XPT REG Regular Track Arm Closer Strength 1-4 ALUM LCC25050 715.00 4040XPT HO Hold Open Track Arm Closer Strength 1-4 ALUM LCC25234 765.00 Accessories Model Description Finish Code Price 4040-18FC Adaptor Plate for Full Cover ALUM LCP30095 88.00 4040-18PAFC Drop Plate for Full Cover ALUM LCP25013 96.00 4040-3049 Hold Open Arm Assembly ALUM LCP17328 210.00 4040-3049CNS Hold Open Cush-N-Stop Arm ALUM LCP25069 275.00 4040-3077 Regular Arm Assembly ALUM LCP23521 167.00 4040-3077CNS Cush-N-Stop Arm ALUM LCP25067 230.00 4040-3077T Regular Track Arm ALUM LCP25127 197.00 4040-72FC Full Plastic Cover ALUM LCP17266 67.50 4040-SP Screw Pack (Wood and Machine Screw) LCP30016 34.50 All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C55
COMMERCIAL Door Controls LCN 4040 Sentronic Series Fire/Life Safety Closers 30 year mechanical warranty, 2 year electrical warranty Fire Rating: Backcheck standard, refer fire door manufacturer for approval Model Description Finish Code Price 4040SE 4040SE-3038 4040SE 24V Single Point Sentronic Closer Strength 1-4 Track to Suit 24V Track Arm ALUM ALUM ALUM LCE24129 LCP25073 LCP25071 960.00 464.00 168.00 LCN 4300 Sentronic Series Fire/Life Safety Closers 30 year mechanical warranty, 2 year electrical warranty Fire Rating: Backcheck standard, refer fire door manufacturer for approval Model Description Hand Finish Code Price 4314ME 24V Multiple Point Sentronic Closer Strength 4 USRH USLH ALUM ALUM LCE24079 LCE24078 1,500.00 1,500.00 USA Handing Guide Please use USA Handing chart when ordering 4300 closers Left Hand Door Right Hand Door OPENING OUT OPENING OUT OPENING IN OPENING IN Outside Outside C56 www.allegion.co.nz Customer Service Auckland: Ph 829 0553 National: Ph 0800 477 869
COMMERCIAL Door Controls
COMMERCIAL Door Controls Briton 2300 Series Cam Action Closers 10 year mechanical warranty Fire Rating: Backcheck standard, refer fire door manufacturer for approval Note: Stainless Steel finish is standard for closer, track and arm assembly Accessories Model Description Finish Code Price 2320BT Cam Action Track Closer Strength 2-4 Pull Side 2321BT Cam Action Track Closer Strength 2-4 Push Side SSS BNT-2320B-T-SS 500.00 SSS BNT-2321B-T-SS 500.00 Model Description Finish Code Price 2720/2320HP 2720/2320 Series Hold Open Conversion Kit BNT-2320-HP 33.00 2720/2320AB 2720/2320 Series Angle Mounting Bracket SE BNT-2320-AB 33.00 2720/2320CS 2720/2320 Series Cushion Limit Stay BNT-2320-CS 18.00 2720/2320AP 2720/2320 Series Track Arm Set SSS BNT-2320-AP-SS 90.00 2320CPS 2320 Series Replacement Cover SSS BNT-2320-CPS-SS 65.00 Briton 2700 Series Cam Action Closers 10 year mechanical warranty Fire Rating: Backcheck standard, refer fire door manufacturer for approval Note: Stainless Steel finish is standard for closer, track and arm assembly Model Description Finish Code Price 2720BDT Cam Action Track Closer Strength 1-5 Pull Side Delayed Action 2721BDT Cam Action Track Closer Strength 1-5 Push Side Delayed Action SSS BNT-2720BD-T-SS 720.00 SSS BNT-2721BD-T-SS 720.00 Accessories Model Description Finish Code Price 2720/2320HP 2720/2320 Series Hold Open Conversion Kit BNT-2320-HP 33.00 2720/2320AB 2720/2320 Series Angle Mounting Bracket SE BNT-2320-AB 33.00 2720/2320CS 2720/2320 Series Cushion Limit Stay BNT-2320-CS 18.00 2720/2320AP 2720/2320 Series Track Arm Set SSS BNT-2320-AP-SS 90.00 2720CPS 2720 Series Replacement Cover SSS BNT-2720-CPS-SS 70.00 Briton 2400 Series Concealed Cam Action Closers 10 year mechanical warranty Fire Rating: Refer fire door manufacturer for approval Note: 10 year mechanical warranty Model Description Finish Code Price 2420T Concealed Cam Action Closer Strength 2-4 SE BNT-2420-T-SE 500.00 Accessories Model Description Finish Code Price 2420HP 2420 Series Hold Open Conversion Kit BNT-2420-HP 30.00 2420CS 2420 Series Cushion Stop BNT-2420-CS 12.00 2420FPLT 2420 Series Flush Fixing Plate SE BNT-2420-F-PLT 40.00 2420IP 2420 Series Intumescent Gasket BNT-2420-IP 130.00 C58 www.allegion.co.nz Customer Service Auckland: Ph 829 0553 National: Ph 0800 477 869
Briton 200 Series Surface Mounted Closers 5 year mechanical warranty Fire Rating: Backcheck standard, refer fire door manufacturer for approval Model Description Pack Finish Code Price NT200-3 Regular Closer Strength 3 Vis SE BNT-N200-3REG 85.00 Accessories COMMERCIAL Door Controls Model Description Finish Code Price NT200-RA 200 Series Regular Arm SE BNT-N200-RA 41.50 NT200-SC 200 Series Slide Cover SE BNT-N200-SC 10.00 Briton 1120 Series Surface Mounted Closers 10 year mechanical warranty Fire Rating: Backcheck standard, refer fire door manufacturer for approval Note: Formed Stainless Steel Cover available, price on application Model Description Finish Code Price 1120B Regular Closer Strength 2-4 SE BNT-1120B-SE 178.00 1120BHO Hold Open Closer Strength 2-4 SE BNT-1120B-HO-SE 217.00 1120BT Track Closer Strength 1-3 SE BNT-1120B-T-SE 268.00 Accessories Model Description Finish Code Price 1120T 1120 Series Track Arm SE BNT-1120-T 84.50 1120HO 1120 Series Hold Open Arm SE BNT-1120ARM-HO-SE 82.00 1120PA 1120 Series Parallel Arm Bracket SE BNT-PA-SE 9.60 1120DP 1120 Series Adaptor Plate SE BNT-1120-DP 27.50 1120PADP 1120 Series Parallel Arm Drop Plate SE BNT-1120-PADP 27.50 1120RA 1120 Series Regular Arm SE BNT-1120-RA 49.00 1120SC 1120 Series Slide Cover SE BNT-1120-SC 9.60 1120SP 1120 Series Screw Pack SE BNT-1120-SP 6.90 1120/1130 1120/1130 Series Track Hold Open Clip SE BNT-T-HOCLIP 9.00 1120/1130 1120/1130 Series Parallel L Bracket SE BNT-1120-L 10.50 1120/1130 1120/1130 Series Z Bracket SE BNT-Z BRACKET 10.50 All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C59
COMMERCIAL Door Controls Briton 1130 Series Surface Mounted Closers 10 year mechanical warranty Fire Rating: Backcheck standard, refer fire door manufacturer for approval Note: Formed Stainless Steel Cover available, price on application Model Description Finish Code Price 1130BDA Regular Closer Strength 1-6 Delayed Action SE BNT-1130B-DA-SE 271.00 1130BT Track Closer Strength 1-4 SE BNT-1130B-T-SE 339.00 Accessories Model Description Finish Code Price 1130T 1130 Series Track Arm SE BNT-1130-T 88.50 1130HO 1130 Series Hold Open Arm SE BNT-1130ARM-HO-SE 96.00 1130PADP 1130 Series Parallel Arm Drop Plate SE BNT-1130-PADP 44.50 1130RA 1130 Series Regular Arm SE BNT-1130-RA 41.50 1130SC 1130 Series Slide Cover SE BNT-1130-SC 10.00 1120/1130 1120/1130 Series Track Hold Open Clip SE BNT-T-HOCLIP 9.00 1120/1130 1120/1130 Series Parallel L Bracket SE BNT-1120-L 10.50 1130/1130 1120/1130 Series Z Bracket SE BNT-Z BRACKET 10.50 1130DP 1130 Series Adaptor Plate SE BNT-1130-AP 40.00 Briton Transom Closers 10 year mechanical warranty Maximum Door Weight: 80kg, adjustable strength (up to 150kg with heavy duty pivot) Note: Supplied complete with mounting kit and pivot set. Cover plate available, refer accessories Model Description Code Price 2800 Transom Closer Non Hold Open Adj 2-4 SL BNT-2800 350.00 2800/90 Transom Closer Hold Open 90 Adj 2-4 SL BNT-2800/90 350.00 2800/105 Transom Closer Hold Open 105 Adj 2-4 SL BNT-2800/105 350.00 Accessories Model Description Finish Code Price 2800A 2800 Series Cover Plate Aluminium Application SS BNT-2800A-CP-SS 53.50 2800W 2800 Series Cover Plate Wood Application SS BNT-2800W-CP-SS 53.50 2800-BP 2800 Series Bottom Pivot SE BNT-2800-BP 26.50 2800-SLA 2800 Series Side Load Arm SE BNT-2800-SLA 42.50 2800-HDP 2800 Series Heavy Duty Pivot (up to 150kg) SE BNT-2800-HDP 42.50 2800-SP 2800 Series Screw Pack BNT-2800-SP 6.40 2800-MB 2800 Series Mounting Bracket BNT-2800-MB 10.50 C60 www.allegion.co.nz Customer Service Auckland: Ph 829 0553 National: Ph 0800 477 869
Briton Floor Springs 10 year mechanical warranty Note: Supplied complete with top pivot set, bottom strap and cover plate 5000 Series Maximum Door Weight: 100kg. Fixed strength Model Description Finish Code Price 5003 5003/90 5003/105 Floor Spring EN3 Non Hold Open Floor Spring EN3 Hold Open 90 Floor Spring EN3 Hold Open 105 SSS SSS SSS BNT-5003 BNT-5003/90 BNT-5003/105 428.00 428.00 428.00 COMMERCIAL Door Controls 5004 Floor Spring EN4 Non Hold Open SSS BNT-5004 428.00 5004/90 Floor Spring EN4 Hold Open 90 SSS BNT-5004/90 428.00 5004/105 Floor Spring EN4 Hold Open 105 SSS BNT-5004/105 428.00 5000-TP 5000 Series Top Pivot Set BNT-5000-TP 38.50 5003-BS 5000 Series Bottom Strap BNT-5000-BS 38.50 5000-CP 5000 Series Cover Plate SSS BNT-5000-CP-SSS 38.50 w 7500 Series Maximum Door Weight: 300kg. Adjustable strength Model Description Finish Code Price 7500 7500 Floor Spring Size 3-6 Non HO SSS BNT-7500 1,000.00 7500/90 7500 Floor Spring Size 3-6 HO 90 SSS BNT-7500/90 1,000.00 7500-TP 7500 Series Top Pivot Set BNT-7500-TP 133.00 7500-BS 7500 Series Bottom Strap BNT-7500-BS 38.50 w Accessories 7500-CP-SSS 7500 Series Cover Plate SSS BNT-7500-CP-SSS 38.50 Description Finish Code Price 5000/7500 Series Spindle 5mm SSS BNT-FS-SP05 27.50 5000/7500 Series Spindle 10mm SSS BNT-FS-SP10 33.00 5000/7500 Series Spindle 15mm SSS BNT-FS-SP15 38.50 5000/7500 Series Spindle 20mm SSS BNT-FS-SP20 44.00 5000/7500 Series Spindle 25mm SSS BNT-FS-SP25 49.50 5000/7500 Series Spindle 30mm SSS BNT-FS-SP30 55.50 5000/7500 Series Spindle 35mm SSS BNT-FS-SP35 60.50 5000/7500 Series Offset Arm SSS BNT-FS-OA 166.00 w All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C61
COMMERCIAL Door Controls Briton 2800 Pivot Sets 10 year mechanical warranty Features & Benefits: Adjustable top pivot, needle roller bearing, height adjustable bottom pivot Maximum Door Weight: 80kg Maximum Door Width: 1100mm Model Description Finish Code Price 2800-PS Light Duty Pivot Set SSS BNT-2800-PS 130.00 Briton 7500 Pivot Sets 10 year mechanical warranty Features & Benefits: Adjustable top pivot, needle roller bearing, heavy duty bottom pivot Maximum Door Weight: 250kg Maximum Door Width: 1400mm Model Description Finish Code Price 7500-PS Heavy Duty Pivot Set SSS BNT-7500-PS 180.00 Ives Pivot Set Note: Minimum door thickness 44mm, Maximum door weight 136kg Description Code Price 7253 Ives Top and Bottom Pivot Set GJH24048 540.00 C62 www.allegion.co.nz Customer Service Auckland: Ph 829 0553 National: Ph 0800 477 869
Briton Door Selectors 10 year mechanical warranty Model Description Finish Code Price B3000/180 Door Selector - Suit opening width to 1800mm SSS B3000/180/SS 116.00 B3000/230 Door Selector - Suit opening width to 2400mm SSS B3000/230/SS 116.00 B4000/305 Door Selector - for doors fitted with exit hardware SSS B4000/305/SS 116.00 Ives Co-ordinators, Filler Bars & Mounting Brackets COMMERCIAL Door Controls 10 year mechanical warranty Model Description Finish Code Price COR32 COR42 COR52 Door Co-ordinator 810mm (suit opening width 864mm to 1320mm) Door Co-ordinator 1066mm (suit opening width 1320mm to 1830mm) Door Co-ordinator 1320mm (suit opening width 1575mm to 2340mm) ALUM GJH22065 472.00 ALUM GJH28071 484.00 ALUM GJH22048 489.00 FL32 Filler Bar 500mm to 800mm ALUM GJH22049 74.50 MB2 Mounting Bracket ALUM GJH28075 48.50 MB1F Mounting Bracket ALUM GJH28076 108.00 COR7G 178mm Gravity Door Co-ordinator GJH22080 261.00 COR9G 229mm Gravity Door Co-ordinator GJH22055 261.00 Glynn Johnson Overhead Door Stops & Holders 10 year mechanical warranty Model Description Finish Code Price GJ453S Overhead Stop Only (681mm to 830mm Doors) GJH22003 INDENT GJ454S Overhead Stop Only (831mm to 983mm Doors) GJH22093 INDENT GJ453H Overhead Hold Open (681mm to 830mm Doors) GJH22005 INDENT GJ454H Overhead Hold Open (831mm to 983mm Doors) GJH22094 INDENT All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C63
Ives Flush Bolts & Dust Proof Strikes 10 year mechanical warranty COMMERCIAL Door Controls Model Description Finish Code Price FB458 Manual Flush Bolt (Metal Doors) FB458 Extension Rod 600mm GJH22018 GJH22019 57.50 13.00 FB358 Manual Flush Bolt (Wood Doors) GJH22088 INDENT FB31T Top Automatic Flush Bolt (Metal Doors) GJH22034 260.00 FB31B Bottom Automatic Flush Bolt (Metal Doors) GJH25177 260.00 FB41T Top Automatic Flush Bolt (Wood Doors) GJH22033 276.00 FB41B Bottom Automatic Flush Bolt (Wood Doors) GJH25176 276.00 FB51T FB61T Top Constant Latching Flush Bolt (Metal Doors) Top Constant Latching Flush Bolt (Wood Doors) GJH25188 INDENT GJH22031 INDENT DP2 19mm Threshold - Floor Mounted Dust Proof Strike GJH22002 76.50 Ives Lock Protectors Model Description Finish Code Price LG10 63mm x 240mm (13 Gauge) Lock Protector SSS GJH22089 191.00 LG12 38mm x 240mm (13 Gauge) Lock Protector SSS GJH22091 INDENT C64 www.allegion.co.nz Customer Service Auckland: Ph 829 0553 National: Ph 0800 477 869
Von Duprin 22 Series 10 year mechanical warranty Fire Rated: Refer fire door manufacturer for approval Door Height: Standard rods accomodate 2134mm door height, extension rods available Model Description Length Finishes Code Price VD22EO Rim Exit Device Only 914mm ALUM VDD11513 685.00 VD22EO Rim Exit Device Only 1220mm ALUM VDD11524 735.00 VD22EO-F Rim Exit Device Only Fire Rated 914mm ALUM VDD11536 745.00 VD2227EO Vertical Rod Exit Device Only 914mm ALUM VDD11236 1,400.00 VD2227EO Vertical Rod Exit Device Only 1220mm ALUM VDD11504 1,500.00 COMMERCIAL Exit Devices VD2227EO-F Vertical Rod Exit Device Only Fire Rated 914mm ALUM VDD11535 1,400.00 VD210NL Nightlatch Trim (less cylinder) NightLatch Rim Cylinder ALUM VDD11557 SLP26015 163.00 110.00 VD230L Lever Trim (less cylinder) Lever Trim Mortice Cylinder ALUM VDD55011 SLP26009 464.00 110.00 VD210K Knob & Trim Cylinder ALUM VDD11558 INDENT VD230TP Thumbpiece Trim (less cylinder) Thumpiece Trim Mortice Cylinder ALUM VDD11350 SLP26009 INDENT 110.00 VD22ALK Alarm Kit to Suit 914mm Device Comprised of: - Alarm Panel - LXS2 Switch Kit - Alarm Mortice Cylinder (order components separately) ALUM VDE11617 VDE11804 SLP26009 600.00 217.00 110.00 Note: For rebated double door set, order: 1x VD22 Rim Exit Device 1x VD2227 Vertical Rod Exit Device 1x VD1609 Strike Accessories For non-rebated double door set, order: 2x VD2227 Vertical Rod Exit Device Model Description Code Price VD22 Black End Cap VDP26022 73.50 VD22 Alarm Panel Only 914mm VDE11617 600.00 VD22 Alarm Panel Only 1220mm VDE10048 INDENT VD22 LXS2 Switch Kit 914mm VDE11804 217.00 VD22 LXS2 Switch Kit 1220mm VDE10019 INDENT VD22 Alarm Mortice Cylinder SLP26009 110.00 VD2227 Extension Rod 914mm VDP26007 124.00 VD2227 Bottom Rod Assembly VDP11345 162.00 VD2227 Top Rod Assembly VDP11343 162.00 VD2227 Rod Support VDP26028 36.50 VD2227 Bottom Latch Mechanism VDP11341 276.00 VD2227 Top Latch Mechanism VDP11340 276.00 VD2227 Latch Assembly Cover VDP26013 122.00 VD2227 Latch Bracket VDP55022 37.50 All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C65
COMMERCIAL Exit Devices Von Duprin 33A Series 10 year mechanical warranty Fire Rated: Refer fire door manufacturer for approval Door Height: Standard rods accomodate 2134mm door height, extension rods available Model Description Length Finish Code Price VD33A-EO Rim Exit Device Only 914mm VDD11530 1,110.00 VD3327A-EO Vertical Rod Exit Device Only 914mm VDD11353 1,680.00 VD388 Nightlatch Trim (less cylinder) Nightlatch Rim Cylinder VDD20065 SLP26015 INDENT 110.00 Hand VD360L Lever Trim (less cylinder) Lever Trim Mortice Cylinder LH RH VDD20063 VDD20064 SLP26009 715.00 715.00 110.00 VD33ALK Alarm Kit to suit 914mm Device Comprised of - Alarm Panel - LXS2 Switch Kit - Alarm Mortice Cylinder (order components separately) VDE10097 VDE11804 SLP26009 INDENT 217.00 110.00 Note: For rebated double door set, order: 1x VD33 Rim Exit Device 1x VD337 Vertical Rod Exit Device 1x VD1609 Strike For non-rebated double door set, order: 2x VD3327 Vertical Rod Exit Device Accessories Model Description Code Price VD3327 Extension Rod 914mm VDP11378 104.00 VD3327 Bottom Latch Mechanism VDP11341 276.00 VD3327 Top Latch Mechanism VDP11340 276.00 VD3327 Latch Assembly Cover VDP26089 231.00 VD3327 Latch Bracket VDP55022 37.50 VD3327 Top Rod Assembly VDP55040 147.00 VD3327 Bottom Rod Assembly VDP55041 147.00 C66 www.allegion.co.nz Customer Service Auckland: Ph 829 0553 National: Ph 0800 477 869
Von Duprin 88 Series 10 year mechanical warranty Fire Rated: Refer fire door manufacturer for approval Door Height: Standard rods accomodate 2134mm door height, extension rods available Model Description Length Finish Code Price VD88EO Rim Exit Device Only 1220mm VDD11514 1,630.00 VD8827EO Vertical Exit Device Only 1220mm VDD16502 2,020.00 COMMERCIAL Exit Devices Note: For rebated double door set, order: 1x VD88 Rim Exit Device 1x VD8827 Vertical Rod Exit Device 1x VD1609 Strike For non-rebated double door set, order: 2x VD8827 Vertical Rod Exit Device Accessories Model Description Code Price VD8827 Extension Rod 610mm VDP11379 INDENT VD8827 Bottom Latch Mechanism VDP55032 353.00 VD8827 Top Latch Mechanism VDP55008 353.00 VD8827 Latch Assembly Cover VDP55013 163.00 VD8827 Lever Axle Pack VDP55018 96.00 All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C67
COMMERCIAL Exit Devices Von Duprin 99 Series 10 year mechanical warranty Fire Rated: Refer fire door manufacturer for approval Door Height: Standard rods accomodate 2134mm door height, extension rods available Model Description Length Finish Code Price VD99EO Rim Exit Device Only 914mm VDD11568 1,080.00 VD99EO-F Rim Exit Device Only Fire Rated 914mm VDD11320 INDENT VD9927EO Vertical Rod Exit Device Only 914mm VDD11543 1,620.00 VD9927EO-F Vertical Rod Exit Device Only Fire Rated 914mm VDD11399 INDENT VD990NL Nightlatch Trim (less cylinder) Nightlatch Rim Cylinder VDD11330 SLP26015 418.00 110.00 VD990TP Thumbpiece Trim (less cylinder) Thumbpiece Rim Cylinder VDD11325 SLP26015 412.00 110.00 VD996L Break Away Lever Trim (less cylinder) Lever Trim Rim Cylinder VDD26127 SLP26015 INDENT 110.00 VD99ALK Alarm Kit to suit 914mm Device Comprised of: - Alarm Panel - LXS2 Switch Kit - Alarm Mortice Cylinder (order components separately) VDE11900 VDE11804 SLP26009 690.00 217.00 110.00 Note: For rebated double door set, order: 1x VD99 Rim Exit Device 1x VD9927 Vertical Rod Exit Device 1x VD1609 Strike Accessories For non-rebated double door set, order: 2x VD9927 Vertical Rod Exit Device Model Description Code Price VD99 Alarm Panel Only 914mm VDE11900 690.00 VD99 LXS2 Switch Kit 914mm VDE11804 217.00 VD99 Alarm Mortice Cylinder SLP26009 110.00 VD9927 Extension Rod 914mm VDP11378 104.00 VD9927 Bottom Latch Mechanism VDP11341 276.00 VD9927 Top Latch Mechanism VDP11340 276.00 VD9927 Latch Assembly Cover VDP26044 131.00 VD9927 Latch Bracket VDP55022 37.50 VD9927 Top Rod Assembly VDP55040 147.00 VD9927 Bottom Rod Assembly VDP55041 147.00 C68 www.allegion.co.nz Customer Service Auckland: Ph 829 0553 National: Ph 0800 477 869
Von Duprin Chexit 10 year mechanical warranty, 1 year electrical warranty Note: Vertical rod exit device available on indent. Power supply and mortice cylinder required to be ordered separately. For Von Duprin PS873 power supply refer Electronic section Model Description Length Finish Code Price CX99EO Rim Exit Device Only 914mm VDE11373 INDENT Von Duprin Universal Strikes Fire Rated: VD 1609 Refer fire door manufacturer for approval Chexit Mortice Cylinder SLP26009 110.00 COMMERCIAL Exit Devices Model Code Price VD 248L-4 VDP26005 72.00 VD 265 VDP26017 268.00 VD 299 VDP26003 74.50 VD 299F VDP11595 92.50 VD 304L VDP26004 62.50 VD 1609 VDP11572 159.00 All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C69
Briton 370 Series 10 year mechanical warranty Door Height: Standard rods accommodate 2500mm door height. Long top shoot available Door Width: Standard cross bar accommodates 1300mm door width Model Description Finishes Code Price 376E Single Panic Bolt SE B376E/SE 376.00 377E Double Panic Bolt SE B377E/SE 545.00 COMMERCIAL Exit Devices 378E Panic Rim Latch SE B378E/SE 310.00 1413L Lever Trim (inc. euro cylinder) SE B1413LE/SE 250.00 1413K Knob Trim (inc. euro cylinder) SE B1413KE/SE 217.00 Parts Description Finish Code Price Cross Bar 376/377 SE B376CB INDENT Cross Bar Plug SE B376CBP INDENT Shoot Guide SE B376SG INDENT Top Tripper Assembly SE B376TTA INDENT Top & Bottom Shoot Plug SE B376ESP INDENT Bottom Rod SE B376BS INDENT Top Rods SE B376TS INDENT 2m Extension Rod - Long Top Shoot SE B376/ELTS/SE 128.00 All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C71
Legge Satin Stainless Steel Pull Handles & Push Plates COMMERCIAL General Hardware 10 year warranty Description Plate Size (mm) Pull Size (mm) Code Price 401 Pull Handle Visible Fixing 300 x 65 150 x 16 DAXPH401SSS-15V 49.00 401 Pull Handle Visible Fixing 300 x 65 200 x 16 DAXPH401SSS-16V 52.50 601 Pull Handle Visible Fixing 300 x 100 200 x 16 DAXPH601SSS-16V 61.50 601 Pull Handle Concealed Fixing 300 x 100 200 x 16 DAXPH601SSS-16C 68.00 606 Push Plate Concealed Fixing (to suit 401 Pull) 606 Push Plate Concealed Fixing (to suit 601 Pull) 300 x 100 DAXPH606SSS-C-401 55.50 300 x 100 DAXPH606SSS-C 27.00 606 Push Plate Visible Fixing 300 x 100 DAXPH606SSS-V 24.00 1351 Pull Handle 150 x 16 200 x 16 DAX1351SSS-05 DAX1351SSS-06 33.50 40.50 1351 Back to Back Pull Handle 200 x 16 DAX1351SSS-06-N 108.00 1351 Pull Handle on 38mm Rose 150 x 16 200 x 16 DAX1351SSS-05-R38 DAX1351SSS-06-R38 47.00 55.50 1353 Offset Pull Handle on 38mm Rose 200 x 16 300 x 19 DAX1353SSS-02-R38 DAX1353SSS-05-R38 63.00 92.00 Legge Satin Stainless Steel Flush Pulls Description L x W x D (mm) Code Price W L 1961 Flush Pull with Screws 120 x 35 x 12.5 150 x 45 x 16.0 DAX1961SSS-01 DAX1961SSS-02 25.00 27.00 D 50 84 1962 Flush Pull with Screws 100 x 50 x 19.0 DAX1962SSS 29.00 100 20 30 85 120 1964 Flush Pull with Screws 120 x 35 x 12.5 DAX1964SSS-01 25.00 C72 www.allegion.co.nz Customer Service Auckland: Ph 829 0553 National: Ph 0800 477 869
Legge Door Stops 10 year mechanical warranty Model Function Finishes Code Price 12801 Floor Mounted Door Stop 50mm Diameter ALUM DAX12801CA 15.00 Ø 32 12802 Floor Mounted Door Stop 32mm Diameter SSS DAX12802SSS 14.00 COMMERCIAL General Hardware 12821 Floor Mounted Bumper Door Stop DAX12821 15.00 12901 Floor Mounted Dome Door Stop DAX12901 9.00 Floor Mounted Round Door Stop 40mm Height SNP SDC19026 14.00 Floor Mounted Square Door Stop 40mm Height SNP SDC19030 14.00 12861 Wall Mounted Door Stop 77mm Projection DAX12861 17.00 13001 Wall Mounted Door Stop 75mm Projection SSS DAX13001SSS 19.00 13002 Wall Mounted Door Stop 75mm Projection SSS DAX13002SSS 15.00 13003 Wall Mounted Square Post Door Stop 83mm Projection SNP SDC19015 15.50 440 Wall Mounted Round Post Door Stop 83mm Projection SNP SDC18540 15.50 470 Wall Mounted Square Post Door Stop 85mm Projection SNP SDC19010 15.50 12841 Hat and Coat Hook DAX12841 14.00 12921 Hat and Coat Hook SSS DAX12921SSS 29.00 All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C73
COMMERCIAL General Hardware
Legge Wall/Floor Mounted Latch Back Door Holders 10 year warranty Finish Description Size (mm) Price Wall Mounted Latch Back n/a DAXWMLB-4 63.00 Floor Mounted Latch Back 100mm DAXFMLB-6 105.00 COMMERCIAL General Hardware Floor Mounted Latch Back 175mm DAXFMLB-10 147.00 Latch Back Round Door Stop 85mm Projection SDC19035 20.00 Legge Stainless Steel Hinges 10 year warranty All hinges supplied with 304 grade stainless steel screws Finish Description Size (mm) SSS Price 13221 Broad Butt, Button Tipped, Loose Pin Hinge 100 x 75 x 2.5 100 x 100 x 2.5 DAX13221SSS-01LP DAX13221SSS-03LP 12.00 15.00 13222 Broad Butt, Button Tipped, Ball Bearing, Fixed Pin Hinge 100 x 75 x 2.5 100 x 100 x 2.5 DAX13222SSS-02FP DAX13222SSS-04FP 15.00 18.00 13222 Radius Broad Butt, Button Tipped, Ball Bearing, Fixed Pin Hinge 100 x 75 x 2.5 DAX13222SSS-02FPR 10.00 13225 Fast Fixed, Button Tipped, Ball Bearing, Fixed Pin Hinge with Pozi Drive Screws 100 x 68 x 2.5 DAX13225SSS-FP-T1 12.00 13225 Fast Fixed, Button Tipped, Ball Bearing, Fixed Pin Hinge with Square Drive Timber Screws 13303 Pivot Hinge Set (maximum door weight 80kg) 90 x 45 x 2.5 DAX13225SSS-FP-T5 DAX13303SSS 12.00 149.00 All prices listed effective from 01/07/2017 All prices listed exclude GST which is applied at the prevailing rate, currently 15%. C75
Legge Roller Catches COMMERCIAL General Hardware Description Finish Code Price 15201 Kevdon Roller Catch with Screws SSS DAX15201SSS 25.00 Legge Heavy Duty Roller Catch SSS DAX15211SSS 30.00 Legge Flushbolt Description Size (mm) Finish Code Price 1912 Flushbolt 150 x 25 DAX1912 73.50 1913 Dust Socket (suit 12mm bolt) DAX1913 21.00 1912 Socket Bolt 150 x 12 LG12SB 50.00 Legge Chain Bolts Description Size (mm) Finish Code Price 1851 Chain Bolt, Reversible Shoot with keepers and open out strike 100 SSS DAX1851SSS-01 84.00 Schlage Cabinet Locks Note: Heavy duty commercial cabinet lock Bolt Throw: 25mm, Door Thickness: 22mm to 28.5mm Description Finish Code Price CL1000 Cabinet Lock SCL25636 186.00 C76 www.allegion.co.nz Customer Service Auckland: Ph 829 0553 National: Ph 0800 477 869