Antriebstechnik Drive Technology \\ Antriebsautomatisierung Drive Automation \ System \ Systemintegration Integration \ Services \ Services Condition Monitoring Service Oil Check Condition Monitoring Lubricant analysis Schwingungsanalyse Vibration SmartCheck SERVICE CDS The modular service system
2 Identify wear extend oil change intervals Oil is an essential part of every gear unit. However, this lubricant is subjected to high loads and thus a continuous aging process. As part of the CDS modular service system, SEW-EURODRIVE offers the Oil Check, the optimum service for identifying oil and gear unit wear and extending oil change intervals. In close collaboration with independent laboratory for lubricant analyses OELCHECK GmbH, all lubricants can be analyzed for you and on a regular basis on request. Regular monitoring of the trend behavior enables more precise information on oil and gear unit wear. Condition Monitoring Service is a component of the modular CDS system from SEW-EURODRIVE.
SEW-EURODRIVE can take charge of the entire process for performing a lubricant analysis and any necessary downstream measures, thus leaving you to devote yourself to your key strengths as a plant operator. Time-consuming and costly production downtimes can be eliminated and maintenance operations scheduled depending on condition/status. If the condition of the oil is assessed positively, the oil change intervals can be extended. Your benefits Minimization of production downtimes by identifying wear at an early stage Extended oil change intervals through analysis of oil condition Elimination of damage due to impurities in the lubricant (e.g. due to water or dust) Planning of condition-based oil change and maintenance operations Clear and comprehensible diagnostics including recommendations for action Oil analyses can be combined with other CDS services
4 How the oil analysis works 1 Ordering the oil analysis 2 Taking the oil sample 3 Sending back 4 Analysis 5 Dispatch of analysis report
5 Technical data Section of the analysis report Contents Overall evaluation Written diagnostics of the current laboratory values incl. recommendations for action Wear Iron Fe [mg/kg] Chromium Cr [mg/kg] Tin Sn [mg/kg] Aluminum Al [mg/kg] Nickel Ni [mg/kg] Copper Cu [mg/kg] Lead Pb [mg/kg] Manganese Mn [mg/kg] Molybdenum Mo [mg/kg] PQ index - Impurities Silicon Si [mg/kg] Potassium K [mg/kg] Sodium Na [mg/kg] Water H 2 O % Oil condition Viscosity at 40 C [mm 2 /s] Viscosity at 100 C [mm 2 /s] Viscosity index - Oxidation [A/cm] Additives Calcium Ca [mg/kg] Magnesium Mg [mg/kg] Zinc Zn [mg/kg] Phosphorus P [mg/kg] Barium Ba [mg/kg] Boron B [mg/kg] Further elements are only stated in the laboratory report if more than 1 mg/kg is measured Additional tests Neutralization number [mgkoh/g] Infrared spectrum -
Drive Technology \ Drive Automation \ System Integration \ Services 24h Service Hotline 0800 SEWHELP 0800 7394357 2307 8928 / 0417 DTC Nord (Garbsen) DC Berlin DTC West (Langenfeld) DTC Ost (Meerane) DC Saarland DC Ludwigshafen DC Würzburg SC Mechanik/Mechatronik (Graben-Neudorf) SC Elektronik (Bruchsal) Drive Technology Center (DTC) Drive Center (DC) Service Competence Center (SC) DC Ulm DTC Süd (Kirchheim) Service Competence Center Mechanik/Mechatronik Ernst-Blickle-Straße 1 76676 Graben-Neudorf Tel. +49 7251 75-1710 Fax +49 7251 75-1711 scc-mechanik@sew-eurodrive.de Service Competence Center Elektronik Ernst-Blickle-Straße 42 76646 Bruchsal Tel. +49 7251 75-1780 Fax +49 7251 75-1769 scc-elektronik@sew-eurodrive.de Drive Technology Center Nord (DTC Nord) Alte Ricklinger Straße 40-42 30823 Garbsen (near Hanover) Tel. +49 5137 8798-30 Fax +49 5137 8798-55 dtc-nord@sew-eurodrive.de Drive Technology Center Ost (DTC Ost) Dänkritzer Weg 1 08393 Meerane (near Zwickau) Tel. +49 3764 7606-0 Fax +49 3764 7606-30 dtc-ost@sew-eurodrive.de Drive Technology Center Süd (DTC Süd) Domagkstraße 5 85551 Kirchheim (near Munich) Tel. +49 89 909552-10 Fax +49 89 909552-50 dtc-sued@sew-eurodrive.de Drive Technology Center West (DTC West) Siemensstraße 1 40764 Langenfeld (near Düsseldorf) Tel. +49 2173 8507-30 Fax +49 2173 8507-55 dtc-west@sew-eurodrive.de Drive Center Berlin (DC Berlin) Alexander-Meißner-Str. 44 12526 Berlin Tel. +49 30 6331131-30 Fax +49 30 6331131-36 dc-berlin@sew-eurodrive.de Drive Center Ludwigshafen (DC Ludwigshafen) Edisonstraße 15 68623 Lampertheim Tel. +49 7251 75-3759 Fax +49 7251 75-503759 dc-ludwigshafen@sew-eurodrive.de Drive Center Saarland (DC Saarland) Gottlieb-Daimler-Straße 4 66773 Schwalbach (Saar) Tel. +49 6831 48946-10 Fax +49 6831 48946-13 dc-saarland@sew-eurodrive.de Drive Center Ulm (DC Ulm) Dieselstraße 18 89160 Dornstadt Tel. +49 7348 9885-0 Fax +49 7348 9885-90 dc-ulm@sew-eurodrive.de Drive Center Würzburg (DC Würzburg) Nürnberger Straße 118 97076 Würzburg-Lengfeld Tel. +49 931 27886-60 Fax +49 931 27886-66 dc-wuerzburg@sew-eurodrive.de SEW-EURODRIVE GmbH & Co KG P. O. Box 30 23 76642 Bruchsal/Germany Tel. +49 7251 75-0 Fax +49 7251 75-1970 sew@sew-eurodrive.com i www.sew-eurodrive.com