FAST Program 2013 Festo Assured Shipping Time

Similar documents
FAST TM Program Festo Assured Shipping Time

Standard Cylinders DNC Inch Series, to ISO 15552

Compact Cylinders ADN Inch Series, Based on ISO Overview

Standard cylinders DNCB, ISO 15552

Tandem/high-force cylinders

Standard cylinders DNC-C180, to ISO 15552

Round Cylinders DSNU, Double-acting Inch Series

Clamping-unit cylinders, standard port pattern

Multi-position cylinders/adapter kits

Compact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287

Short-stroke cylinders ADVC/AEVC

Standard cylinders DNC-C180, to ISO 15552

Semi-rotary drives DRQ

Flat cylinders EZH/DZF/DZH

Slide units SPZ, twin piston

Linear/swivel clamp CLR

Square profile cylinders DNC - Inch Series

Standard cylinders DNG/DNGZS, ISO 15552

Compact cylinders ADVUL

Round Cylinders ESNU, Single-acting Inch Series

Standard cylinders DNCI, with measured-value transducer DADE

Feed separators HPVS

Compact cylinders ADN/AEN, to ISO 21287

Standard cylinders DNC, ISO 15552

Swivel/linear drive units DSL-B

Standard cylinders DNCB, ISO 15552

Round Cylinders DSNU, Double-acting Inch Series

Linear drives DGC-HD, with heavy-duty guide

Twin cylinders DPZ/DPZJ

Standard cylinders DNC, ISO 15552

Compact cylinders ADN-S, AEN-S

Flat Cylinders DZF - Inch Series Overview

Compact cylinders ADN/AEN, to ISO 21287

Linear drives DGC-K. Festo core product range Covers 80% of your automation tasks

-V- New. Linear drives DGC Features. 2 Internet:

-H- Note. Feed separators HPV Key features at a glance. Separation of workpieces in the supply process

Round cylinders DSNU/ESNU

Standard cylinders DSBG, to ISO 15552

Cylinders DSBG to ISO 15552

Hinge cylinders DW Key features

Linear drives SLM, with guided slide

Linear drives DGPL Selection aid

Linear drives SLG, flat design

Linear drive units DGO

Standards-based cylinders DSBG to ISO 15552

3 Electromechanical drives

Mini guided cylinders DFC

Standard cylinders DSBC, to ISO 15552

Semi-rotary drives DRVS

Round cylinders DSNU/DSNUP/DSN/ESNU/ESN

Mini slides SLT/SLS/SLF

-U- Type discontinued

-H- Note. Feed separators HPV Key features at a glance. Separation of workpieces in the supply process

Linear actuators DLP, Copac

Linear drives DGPL Selection aid

Flat Cylinders DZH - Inch Series Overview

Round cylinders DSNU/ESNU

-U- Type discontinued. -H- Note. Available up until Angle grippers HGWC Key features

Linear actuators DFPI

Linear drives DGC Key features

Electric cylinders EPCO, with spindle drive

Cartridge cylinders EGZ

Round cylinders DSEU/ESEU

Mini slides SLT/SLS/SLF

Standards-based cylinders DSBC, to ISO 15552

Compact cylinders CDC, ISO 21287, Clean Design

-H- Note. Angle grippers HGWC Key features. 2 Internet:

Handling modules HSP

Proximity sensors SMT/SME-10, for C-slot

Guided drives DFM/DFM-B

Guided drives DFM/DFM-B

Standard cylinders DDPC, with measured-value transducer DADE

Linear drives DGC. Festo core product range Covers 80% of your automation tasks

-U- Type discontinued. -H- Note. Available up until Angle grippers HGW Key features. 2 Internet:

Swivel modules DSM/DSM-B

Standard cylinders DSBF-C, to ISO 15552, Clean Design

Hinge cylinders DFAW

Radial grippers DHRS

Stopper cylinders DFSP

Slim, Flat, Elliptical Piston DZH Cylinders Provide Non-rotating Linear Actuation in up to 50% Less Space

Parallel grippers HGPL-B, heavy-duty with long stroke

Twin-piston semi-rotary drives DRRD

Parallel grippers HGP, with protective dust cap

Stopper cylinders DFST

Radial grippers DHRS

Standard cylinders DSBF-C, to ISO 15552, Clean Design

On-off Valves MS-EE, Inch Series Overview

Mini slides SLTE, electric

Parallel grippers HGPC

Linear drives DGPL, with external displacement encoder

Electric cylinders EPCO, with spindle drive

Guided drives DGRF-C, Clean Design

Index. -V- New. -N- Diameters. -T- Stroke lengths. Pneumatic linear drive units DGP/DGPL Key features at a glance Festo AG & Co.

Parallel grippers DHPS

Cylinders with displacement encoder

Twin-piston semi-rotary drives DRRD

On-off Valves MS-EM, Inch Series Overview

Spindle axes DGE Key features

Passive guide axes DGC-FA, without drive

Semi-rotary drives DSR/DSRL

Transcription:

FAST Program 203 Festo Assured Shipping Time TM A complete line of automation components available when you need them!

FAST TM Program 203 Festo Assured Shipping Time A complete line of automation components available when you need them With Same Day and 3 Day availability of 000 s of Festo automation components, the FAST program enables designers and manufacturers to: lower inventory costs reduce time-to-market for prototype and production equipment invest inventory savings and time savings in growing their business For program details including complete catalog documentation, visit: www.festo.ca/fast Piston Rod Cylinders Guided Piston Rod Actuators Rodless Actuators Rotary Actuators Pneumatic Valves and Manifolds Manual/Mechanical Valves Stand Alone Valves Valve Manifolds Sensors Pressure Sensors Vacuum Sensors Actuator Feedback Air Preparation Units Filter/Regulator-Lubricators Filter Regulators Pressure Regulators and Filters Lubricators On/Off Valves and Soft-start Valves Distribution Blocks Fittings / Flow Controls / Tubing / Silencers Fittings Flow Controls Tubing Silencers Online or offline Internet or DVD Festo products and services provide solutions for greater productivity in industrial and process automation. Define your optimal solution from over 2,000 products in thousands of variants offline on DVD, or on the internet with our user-friendly digital catalog, and Online Shops. For customer service 24 hours a day, visit our Online Shop at www. festo.ca/onlineshop. Once registered, download 2D and 3D CAD models, view pricing and availability, place orders and track the status of all your online and offline orders.

Detailed product information on DVD and www.festo.com/catalog/<type> or <order code> FAST Program Products Overview 2 Piston Rod Cylinders Guided Piston Rod Cylinders Rodless Actuators Rotary Actuators 5 4 53 83 2 Valves and Valve Manifolds Overview 88 Manual and Mechanical Valves Stand-alone Valves and Manifold Valve Manifolds 92 Blocks 02 6 Contents A 3 Sensors Overview 48 Pressure and Vacuum Sensors Actuator Feedback 50 63 4 Air Preparation Units Overview 82 Service Units Filter Regulators Pressure Regulators Standard, Fine and Micro Filters 87 89 92 94 Lubricators On/Off and Soft-Start Valves Distributor Blocks Pressure Gauges 98 200 206 208 5 Fittings / Flow Controls / Silencers / Tubing Overview 237 Push-in Fittings and Connectors Flow Control Valves Silencers Tubing 246 254 257 259 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/...

Overview Piston Rod Cylinders Piston Rod Cylinders Inch Series Piston [in] ) Cushioning Position Sensing Lead Time Same Day/Next Day 3 Days Standard Stroke [in] Standard Stroke [in] Custom ½ 2 3 4 5 6 8 0 2 Stroke [in] Page DSNU Double Acting Round Cylinder Ä, y P A 0.04 4 5 ½ P A 0.04 8 Æ PPV A 0.04 8 ¾ PPV A 0.04 2 PPV A 0.04 20 DNC Double Acting Cylinder ¼ PPV A 0.4 80 0 Æ PPV A 2 PPV A 2½ PPV A ADN Double Acting Compact Cylinder 2) ½ P A ¼, ½, ¾,, ¼, ½ 0.04 2 6 Æ P A ¼, ½, ¾,, ¼, ½, 0.04 2 2 ¾, P A ¼, ½, ¾,, ¼, ½, 0.04 2 2, 2½ ¼, Æ, 2 P A ¼, ½, ¾,, ¼, ½, 2, 2½, 3 0.04 6 Piston Rod Cylinders Metric Series Piston [mm] Cushioning Position Sensing Lead Time Same Day/Next Day 3 Days Standard Stroke [mm] Standard Stroke [mm] Custom 0 25 40 50 80 00 25 60 200 250 300 Stroke [mm] Page DSNU Double Acting Standard Cylinder to ISO 6432 8, 0 P A 00 23 2 P A 200 6 PPV A 320 20 PPV A 320 25 PPV A 500 DNC Double Acting Cylinder to ISO 5552 32, 40, PPV A 0 2,000 28 50, 63 ADN Double Acting Compact Cylinder 2) 2 P A 5, 0, 5, 20, 25, 30, 40 300 34 6 P A 5, 0, 5, 20, 25, 30, 300 40, 50 20, 25 P A 5, 0, 5, 20, 25, 30, 400 40, 50, 60 32, 40, P A 5, 0, 5, 20, 25, 30, 400 50 40, 50, 60, 80 ) Approximated values; for reference only. 2) The piston rod of the ADN is available with either male or female thread. Legend A Includes magnet for position sensing P Fixed pneumatic cushioning, both ends PPV Adjustable pneumatic cushioning, both ends Note: All metric products can be used within inch tubing systems via hybrid fittings ( Overview on page 24) 2 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Overview Guided Piston Rod Cylinders Guided Piston Rod Cylinders Metric Series Piston [mm] Cushioning Position Sensing Lead Time Same Day/Next Day (P cushioning) / 3 Days (P, Y3 cushioning) Standard Stroke [mm] 0 20 25 30 40 50 80 00 25 50 60 200 Page DGSL Double Acting Ball Bearing Guided Mini Slide 4 P, P A 4 6 P, P A 8 P, P, Y3 A 0 P, P, Y3 A 2, 6 P, P, Y3 A 20, 25 P, P, Y3 A DFM-GF Double Acting Plain Bearing Guided Cylinder 2, 6 P A 48 20, 25 P A 32 P A 40, 50, 63 P A ) Approximated values; for reference only. Legend A Includes magnet for position sensing P Fixed pneumatic cushioning, both ends P Fixed pneumatic cushioning with metallic end position, both ends PPV Adjustable pneumatic cushioning, both ends Y3 Progressive shock absorbers, both ends Note: All metric products can be used within inch tubing systems via hybrid fittings ( Overview on page 24) 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 3

Overview Rodless Actuators, Rotary Actuators Rodless Actuators Inch Series Piston [in] ) Position Sensing Cushioning Lead Time Page Metric Series Piston Cushioning Position Lead Time 3 Days [mm] Sensing 3 Days Page Custom Stroke [in] Custom Stroke [mm] DGC-G Linear Actuator, Basic Design DGC-G Linear Actuator, Basic Design Ç,, ¼, Æ, 2, 2½ PPV A 0.04 8 54 8, 25, 32, 40, 50, 63 PPV A 3,000 69 DGC-GF Plain Bearing Guided Actuator Ç,, ¼, Æ, 2, 2½ PPV, YSR, YSRW DGC-KF Recirculating Ball Bearing Guided Actuator Ç,, ¼, Æ, 2, 2½ PPV, YSR, YSRW DGC-GF Plain Bearing Guided Actuator A 0.04 8 57 8, 25, 32, 40, 50, 63 PPV, YSR, YSRW A 3,000 72 DGC-KF Recirculating Ball Bearing Guided Actuator A 0.04 8 60 8, 25, PPV, A 3,000 75 32, 40, YSR, 50, 63 YSRW DGC-FA Passive Guide Axis DGC-FA Passive Guide Axis Ç,, ¼, Æ, 2, 2½ P, YSR, YSRW 0.04 8 63 8, 25, 32, 40, 50, 63 P, YSR, YSRW 3,000 78 Rotary Actuators Metric Series Piston [mm] Cushioning Shaft 2) Position Sensing Lead Time: Same Day/Next Day Swivel Angle Cushioning None P CC Torque at 6 bar [Nm] Page DSM-B Double Acting Adjustable Angle Vane Actuator 2 None, P, CC FW A 270 254 238.25 83 6 None, P, CC FW A 270 254 238 2.5 25 None, P, CC FW A 270 258 246 5 32 None, P, CC FW A 270 258 246 0 40 None, P, CC FW A 270 255 240 20 ) Approximated values; for reference only. 2) The shaft of the DSM-B is supplied with a woodruff key unless option FW is selected. Legend A Includes magnet for position sensing CC Shock absorbers, both ends P Fixed pneumatic cushioning, both ends P Fixed pneumatic cushioning with metallic end position, both ends PPV Adjustable pneumatic cushioning, both ends Y3 Progressive shock absorbers, both ends YSR Self-adjusting shock absorber YSRW Self-adjusting progressive shock absorber Note: All metric products can be used within inch tubing systems via hybrid fittings ( Overview on page 24) 4 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Round Cylinders DSNU Inch Series Overview Piston 5/6 to Stroke lengths up to 20 Double-acting Meets the highest requirements for running characteristics, service life and load carrying ability Extensive range of accessories Detailed product information www.festo.com/catalog/dsnu Product Range Overview Function Type Piston Stroke Force Variants [in] [in] [lbf] P PPV A Double-acting DSNU 5/6, 3/8, /2, 5/8, 3/4, 0.04 20 5.2 66.3 ) ) Adjustable as of Piston 5/8 Variants P Flexible cushioning at both ends PPV Adjustable air cushioning at both ends A Magnet for position sensing Type Piston Standard Stroke Variable Stroke ) [in] [in] [in] DSNU 5/6, 3/8 /2,, 2, 3, 4 0.04 4 /2, 5/8 /2,, 2, 3, 4, 5, 6, 8 0.04 8 3/4 /2,, 2, 3, 4, 5, 6, 8, 0, 2 0.04 2 /2,, 2, 3, 4, 5, 6, 8, 0, 2 0.04 20 ) Reliable position sensing requires a minimum stroke of 0.4 inch. Contents Technical Data 6 Ordering Data 7 Overview 8 9 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 5

Round Cylinders DSNU Inch Series Technical Data Double-acting Diameter 5/6 in Stroke length 0.04 20in General Technical Data Piston [in] 5/6 3/8 /2 5/8 3/4 Pneumatic connection 0-32 UNF 0-32 UNF 0-32 UNF 0-32 UNF /8 NPT /8 NPT Piston rod thread 6-32 UNC 6-32 UNC 0-32 UNF 0-32 UNF 5/6-24 UNF 3/8-24 UNF Constructional design Piston Piston rod Cylinder barrel Cushioning Flexible cushioning rings at both ends (P) Adjustable air cushioning at both ends (PPV) Cushioning length (PPV) [in] 0.47 0.59 0.67 Magnet for position sensing ) Optional ) Position sensing via magnetic proximity sensor (ordered separately, see accessories). Operating Pressure [psi] Piston [in] 5/6 3/8 /2 5/8 3/4 Operating medium Compressed air in accordance with ISO 8573-:200 [7:4:4] Note on operating/pilot medium Operation with lubricated medium possible (in which case lubricated operation will always be required) Operating pressure 22. 47.0 4.7 47.0 Ambient Conditions Ambient temperature ) [ F] 4 +76 Corrosion resistance class CRC 2) 2 ) Note operating range of proximity sensors 2) Corrosion resistance class 2 according to Festo standard 940 070 Components with moderate corrosion resistance for use in normal industrial environments subjected to contact with coolants or lubricating agents. Forces [lbf] and Impact Energy [ft-lbf] Piston [in] 5/6 3/8 /2 5/8 3/4 Theoretical force at 90 psi, extending 6.7 0.6 5.3 27.2 42.5 66.3 Theoretical force at 90 psi, retracting 5.2 9.0.5 23.4 35.5 55.5 Max. impact energy at the end positions 0.02 0.04 0.05 0. 0.5 0.22 Weights [oz] Piston [in] 5/6 3/8 /2 5/8 3/4 Product weight with 0 inch stroke.22.32 2.65 3.7 6.59 8.40 Additional weight per inch stroke 0.20 0.25 0.36 0.4 0.64 0.99 6 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Round Cylinders DSNU Inch Series Technical Data, Ordering Data Materials Sectional view 2 3 4 DSNU Piston rod High-alloy stainless steel 2 Bearing cap Wrought aluminum alloy 3 Cylinder barrel High-alloy stainless steel 4 End cap Wrought aluminum alloy Seals Polyurethane, nitrile rubber Ordering Data Piston Stroke Piston Stroke [in] [in] Part No. Type LT [in] [in] Part No. Type LT Ä ½ 546394 DSNU-5/6 -/2 -P-A D 546393 DSNU-5/6 - -P-A D 2 546395 DSNU-5/6-2 -P-A D 3 546396 DSNU-5/6-3 -P-A 3D 4 546397 DSNU-5/6-4 -P-A 3D 0.04 4 548482 DSNU-5/6 - -P-A 3D y ½ 546399 DSNU-3/8 -/2 -P-A D 546398 DSNU-3/8 - -P-A D 2 546400 DSNU-3/8-2 -P-A D 3 54640 DSNU-3/8-3 -P-A 3D 0.04 4 548483 DSNU-3/8 - -P-A 3D ½ ½ 546387 DSNU-/2 -/2 -P-A-B D 546386 DSNU-/2 - -P-A-B D 2 546388 DSNU-/2-2 -P-A-B D 0.04 8 548484 DSNU-/2 - -P-A 3D Æ 546389 DSNU-5/8 - -PPV-A-B D 2 546390 DSNU-5/8-2 -PPV-A-B D 3 54639 DSNU-5/8-3 -PPV-A-B D 4 546392 DSNU-5/8-4 -PPV-A-B D 0.04 8 54850 DSNU-5/8 - -PPV-A 3D ¾ 546403 DSNU-3/4 - -PPV-A D 2 546406 DSNU-3/4-2 -PPV-A D 3 546407 DSNU-3/4-3 -PPV-A D 4 546408 DSNU-3/4-4 -PPV-A D 5 546409 DSNU-3/4-5 -PPV-A D 6 54640 DSNU-3/4-6 -PPV-A D 8 5464 DSNU-3/4-8 -PPV-A D 0 546404 DSNU-3/4-0 -PPV-A D 2 546405 DSNU-3/4-2 -PPV-A D 0.04 2 548536 DSNU-3/4 - -PPV-A 3D ½ 54643 DSNU- -/2 -PPV-A 3D 54642 DSNU- - -PPV-A D 2 54646 DSNU- -2 -PPV-A D 3 54642 DSNU- -3 -PPV-A D 4 54647 DSNU- -4 -PPV-A D 5 54648 DSNU- -5 -PPV-A D 6 54649 DSNU- -6 -PPV-A D 8 546420 DSNU- -8 -PPV-A D 0 54644 DSNU- -0 -PPV-A D 2 54645 DSNU- -2 -PPV-A D 0.04 20 548437 DSNU- - -PPV-A 3D LT = Lead time D typically ships same day/next day 3D typically ships within 3 days 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 7

Round Cylinders DSNU Inch Series 9 6 aa 5 ah aj ab ac 7 ae 8 2 3 ad ag 4 5 af 6 7 8 Mounting Attachments and Rod eye SGS 9 2 Coupling piece KSZ ksz 3 Rod clevis SG 9 4 Self-aligning rod coupler FK 9 5 Flange mounting FBN 9 6 Foot mounting HBN/HF 9 7 Swivel mounting WBN 9 8 Swivel mounting SBN sbn 9 Clevis foot LBN 9 Page/Internet Mounting Attachments and Page/Internet aj One-way flow control valve GRLA 9 aa Push-in fitting QB 9 ab Sensor mounting kit SMBR smbr ac Proximity switch SMEO/SMTO smto ad Sensor mounting kit SMBR-8 9 ae Proximity switch SME/SMT-8 9 af Sensor mounting kit SMBR-0 smbr-0 ag Proximity switch SME/SMT-0 9 ah Guide unit FEN fen 8 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Round Cylinders DSNU Inch Series Ordering Data Mounting Attachments Technical Data www.festo.com/catalog/<type> or <order code> For [in] Part No. Type Foot mounting HBN Foot mounting HF Flange mounting Swivel mounting Clevis foot 5/6, 3/8 523 HBN-8/0x /2, 5/8 525 HBN-2/6x 3/4, 527 HBN-20/25x 5/6, 3/8 524 HBN-8/0x2 /2, 5/8 526 HBN-2/6x2 3/4, 528 HBN-20/25x2 5/6, 3/8 243 HF-5/6-3/8 -A /2, 5/8 244 HF-/2-5/8 -A 3/4, 245 HF-3/4 - -A 5/6, 3/8 529 FBN-8/0 /2, 5/8 530 FBN-2/6 3/4, 53 FBN-20/25 5/6, 3/8 8608 WBN-8/0 /2, 5/8 8609 WBN-2/6 3/4, 860 WBN-20/25 5/6, 3/8 6057 LBN-8/0 /2, 5/8 6058 LBN-2/6 3/4, 6059 LBN-20/25 Ordering Data Piston Rod Attachments Technical Data www.festo.com/catalog/<type> or <order code> For [in] Part No. Type Rod eye 5/6, 3/8 532693 SGS-6-32 /2, 5/8 532694 SGS-0-32 3/4 532695 SGS-5/6-24 532696 SGS-3/8-24 Rod clevis 5/6, 3/8 27 SG-6-32 /2, 5/8 546552 SG-UNF0-32-B 3/4 546574 SG-UNF5/6-24-B 546540 SG-UNF3/8-24-B Self-aligning rod coupler 5/6, 3/8 532702 FK-6-32 /2, 5/8 532703 FK-0-32 3/4 532704 FK-5/6-24 532705 FK-3/8-24 Ordering Data Proximity Sensors and Connecting Cables Description Part No. Type Proximity sensor for C-slot, magneto-resistive N/O contact Technical data 68 PNP, cable, 8 ft 55373 SMT-0M-PS-24V-E-2,5-L-OE PNP, plug 55375 SMT-0M-PS-24V-E-0,3-L-M8D Magnetic reed N/O contact Technical data 69 Cable, 8 ft 55369 SME-0M-ZS-24V-E-2,5-L-OE Plug 55367 SME-0M-DS-24V-E-0,3-L-M8D Proximity sensor for T-slot, magneto-resistive N/O contact Technical data 64 PNP, cable, 8 ft 543867 SMT-8M-PS-24V-K-2,5-OE PNP, plug 543866 SMT-8M-PS-24V-K-0,3-M8D NPN, cable, 8 ft 543870 SMT-8M-NS-24V-K-2,5-OE NPN, plug 54387 SMT-8M-NS-24V-K-0,3-M8D Magnetic reed N/O contact Technical data 65 Cable, 8 ft 543862 SME-8M-ZS-24V-K-2,5-OE Plug 54386 SME-8M-DS-24V-K-0,3-M8D Connecting cable, straight socket 8 ft 54333 NEBU-M8G3-K-2.5-LE3 Ordering Data Mounting Kits for Proximity Sensors SMT/SME-8 For [in] Part No. Type 5/6 7509 SMBR-8-8 3/8 75092 SMBR-8-0 /2 75093 SMBR-8-2 5/8 75094 SMBR-8-6 3/4 75095 SMBR-8-20 75096 SMBR-8-25 Ordering Data One-way Flow Control Valves for Exhaust Air Flow Control Technical Data 254 Function For [in] Tubing O.D. [in] Part No. Type 5/6, 3/8, /2, 5/8 5/32 564840 GRLA-0-32-UNF-QB-5/32-U /4 564842 GRLA-0-32-UNF-QB-/4-U 3/4, 5/32 534656 GRLA-/8-QB-5/32-U /4 534658 GRLA-/8-QB-/4-U Ordering Data Push-in Fittings QB Technical Data 246 Function For [in] Tubing O.D. [in] Part No. Type 5/6, 3/8, /2, 5/8 3/6 533268 QB-0-32-UNF-3/6-U /4 533269 QB-0-32-UNF-/4-U 3/4, 3/6 533272 QB-/8-3/6-U /4 533273 QB-/8-/4-U Lead Time LT for all products on this page: D typically ships same day/next day 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 9

Standard Cylinders DNC Inch Series, to ISO 5552 DNC Standard Cylinders meet ISO 5552 mounting, rod, bore and thread dimension specifications for easy interchangeability. Piston ¼ to 2½ Strokes of up to 80 Profile slot for proximity sensor on 3 sides Numerous variants for customized applications Repairable Detailed product information www.festo.com/catalog/dnc Product Range Overview Function Version Piston Stroke Force Variants [in] [in] [lbf] PPV A Basic version Double-acting DNC ¼, Æ, 2, 2½ 0.4 80 5.3 420 Variants PPV Pneumatic cushioning adjustable at both ends A Position sensing Contents Technical Data Ordering Data 2 Overview 3 4 0 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Standard Cylinders DNC Inch Series, to ISO 5552 Technical Data Materials Bearing and end caps: Die-cast aluminum Profile barrel: Anodized aluminum Piston rod: High-alloy steel Seals: Polyurethane Technical Data Piston ¼ Æ 2 2½ Pneumatic connection xnpt ¼NPT ¼NPT ynpt End of piston rod Male thread Piston rod thread 3/8-24 UNF /2-20 UNF 5/8-8 UNF 5/8-8 UNF Cushioning Pneumatic cushioning adjustable at both ends Cushioning length [mm] 0.8 0.8 0.9 0.9 Theoretical force at 90 psi, [lbf] 08.6 69.5 264.8 420.4 advancing Theoretical force at 90 psi, [lbf] 93.3 42.3 222.6 378. retracting Length at 0 mm stroke [mm] 5.75 6.42 7.05 7.64 Width [mm].77 2.3 2.52 2.95 Height [mm].77 2.3 2.52 2.95 Operating Conditions Operating medium Compressed air in accordance with ISO 8573-:200 [7:4:4] Note on operating/pilot medium Operation with lubricated medium possible (in which case lubricated operation will always be required) Operating pressure [psi] 8.7 74 Ambient temperature ) [ F] 4 +76 ) Note operating range of proximity sensors. 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/...

Standard Cylinders DNC Inch Series, to ISO 5552 Ordering Data Ordering Data Piston Stroke Piston Stroke [in] [in] Part No. Type LT [in] [in] Part No. Type LT ¼ 7785 DNC- /4 - -PPV-A D Æ 7786 DNC- /4-5/8 -PPV-A 3D 2 7787 DNC- /4-2 -PPV-A D 3 7788 DNC- /4-3 -PPV-A D 4 7789 DNC- /4-4 -PPV-A D 5 77820 DNC- /4-5 -PPV-A D 6 7782 DNC- /4-6 -PPV-A D 8 77822 DNC- /4-8 -PPV-A 3D 0 77823 DNC- /4-0 -PPV-A 3D 2 77824 DNC- /4-2 -PPV-A 3D 6 77825 DNC- /4-6 -PPV-A 3D 20 77826 DNC- /4-20 -PPV-A 3D 0.4 80 7784 DNC- /4 - -PPV-A 3D Æ 77867 DNC- 5/8 - -PPV-A D Æ 77868 DNC- 5/8-5/8 -PPV-A 3D 2 77869 DNC- 5/8-2 -PPV-A D 3 77870 DNC- 5/8-3 -PPV-A D 4 7787 DNC- 5/8-4 -PPV-A D 5 77872 DNC- 5/8-5 -PPV-A D 6 77873 DNC- 5/8-6 -PPV-A D 8 77874 DNC- 5/8-8 -PPV-A D 0 77875 DNC- 5/8-0 -PPV-A 3D 2 77876 DNC- 5/8-2 -PPV-A 3D 6 77877 DNC- 5/8-6 -PPV-A 3D 20 77878 DNC- 5/8-20 -PPV-A 3D 0.4 80 77866 DNC- 5/8 - -PPV-A 3D 2 7799 DNC-2 - -PPV-A D Æ 77920 DNC-2-5/8 -PPV-A 3D 2 7792 DNC-2-2 -PPV-A D 3 77922 DNC-2-3 -PPV-A D 4 77923 DNC-2-4 -PPV-A D 5 77924 DNC-2-5 -PPV-A D 6 77925 DNC-2-6 -PPV-A D 8 77926 DNC-2-8 -PPV-A D 0 77927 DNC-2-0 -PPV-A 3D 2 77928 DNC-2-2 -PPV-A 3D 6 77929 DNC-2-6 -PPV-A 3D 20 77930 DNC-2-20 -PPV-A 3D 0.4 80 7798 DNC-2 - -PPV-A 3D 2½ 7797 DNC-2 /2 - -PPV-A D Æ 77972 DNC-2 /2-5/8 -PPV-A D 2 77973 DNC-2 /2-2 -PPV-A D 3 77974 DNC-2 /2-3 -PPV-A D 4 77975 DNC-2 /2-4 -PPV-A D 5 77976 DNC-2 /2-5 -PPV-A D 6 77977 DNC-2 /2-6 -PPV-A D 8 77978 DNC-2 /2-8 -PPV-A D 0 77979 DNC-2 /2-0 -PPV-A 3D 2 77980 DNC-2 /2-2 -PPV-A 3D 6 7798 DNC-2 /2-6 -PPV-A 3D 20 77982 DNC-2 /2-20 -PPV-A 3D 0.4 80 77970 DNC-2 /2 - -PPV-A 3D LT = Lead time D typically ships same day/next day 3D typically ships within 3 days 2 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Standard Cylinders DNC Inch Series, to ISO 5552 Peripherals Overview 2 3 bg 4 bh 5 6 7 9 8 aj aa ab ab ac ad 5 af af ae bf ag ah aj ai bj ba bb be bd 2 3 4 5 bc Multi-position kit DPNC dpnc 2 Foot mounting HNC 4 3 Flange mounting FNC 4 4 Trunnion flange ZNCF 4 5 Trunnion support LNZG 4 6 Swivel flange SNC 4 7 Clevis foot LSNG 4 8 Clevis foot LSNSG lsnsg 9 Swivel flange SNCS 4 aj Clevis foot LBG 4 aa Swivel flange SNCL 4 ab Swivel flange SNCB 4 ac Clevis foot LNG 4 ad Clevis foot LSN 4 Page/Internet ae Trunnion mounting kit ZNCM 4 af Rod eye SGS 5 ag Right-angle clevis foot LQG lqg ah Rod clevis SGA sga ai Coupling piece KSZ ksz bj Rod clevis SG 5 ba Self-aligning rod coupler FK 5 bb Adapter AD ad bc Guide unit FENG feng bd Mounting kit SMB-8-FENG feng be Slot cover ABP-5-S abp bf Proximity sensor SME/SMT-8 5 bg One-way flow control valve GRLA 5 bh Push-in fitting QS 5 Page/Internet 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 3

Standard Cylinders DNC Inch Series, to ISO 5552 Ordering Data Mounting Attachments Technical Data www.festo.com/catalog/<type> or <order code> For [in] Part No. Type Ordering Data Mounting Attachments Technical Data www.festo.com/catalog/<type> or <order code> For [in] Part No. Type Foot mounting HNC Swivel flange SNCS ¼ 74369 HNC-32 Æ 74370 HNC-40 50 7437 HNC-50 2½ 74372 HNC-63 Flange mounting FNC ¼ 74376 FNC-32 Æ 74377 FNC-40 2 74378 FNC-50 2½ 74379 FNC-63 Trunnion flange ZNCF ¼ 744 ZNCF-32 Æ 7442 ZNCF-40 2 7443 ZNCF-50 2½ 7444 ZNCF-63 Swivel flange SNCL Clevis foot LSNG Clevis foot LBG ¼ 74397 SNCS-32 Æ 74398 SNCS-40 2 74399 SNCS-50 2½ 74400 SNCS-63 ¼ 74404 SNCL-32 Æ 74405 SNCL-40 2 74406 SNCL-50 2½ 74407 SNCL-63 ¼ 3740 LSNG-32 Æ 374 LSNG-40 2 3742 LSNG-50 2½ 3743 LSNG-63 Trunnion mounting kit ZNCM ¼ 63525 ZNCM-32 Æ 63526 ZNCM-40 2 63527 ZNCM-50 2½ 63528 ZNCM-63 Trunnion support LNZG ¼ 32959 LNZG-32 Æ, 2 32960 LNZG-40/50 2½ 3296 LNZG-63/80 Swivel flange SNC ¼ 74383 SNC-32 Æ 74384 SNC-40 2 74385 SNC-50 2½ 74386 SNC-63 Clevis foot LSN Clevis foot LNG ¼ 376 LBG-32 Æ 3762 LBG-40 2 3763 LBG-50 2½ 3764 LBG-63 ¼ 556 LSN-32 Æ 5562 LSN-40 2 5563 LSN-50 2½ 5564 LSN-63 ¼ 33890 LNG-32 Æ 3389 LNG-40 2 33892 LNG-50 2½ 33893 LNG-63 Swivel flange SNCB ¼ 74390 SNCB-32 Æ 7439 SNCB-40 2 74392 SNCB-50 2½ 74393 SNCB-63 Lead Time LT for all products on this page: D typically ships same day/next day 4 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Standard Cylinders DNC Inch Series, to ISO 5552 Ordering Data Piston Rod Attachments Technical Data www.festo.com/catalog/<type> or <order code> For Part No. Type Rod eye SGS Rod clevis SG ¼ 546540 SGS-3/8-24 Æ 546545 SGS-/2-20 2, 2½ 546552 SGS-5/8-8 ¼ 546540 SG-UNF3/8"-24-B Æ 546545 SG-UNF/2"-20-B 2, 2½ 546575 SG-UNF5/8"-8-B Self-aligning rod coupler FK ¼ 532705 FK-3/8-24 Æ 532706 FK-/2-20 2, 2½ 532707 FK-5/8-8 Ordering Data Proximity Sensors and Connecting Cables Description Part No. Type Proximity sensor for T-slot, magneto-resistive N/O contact Technical data 64 PNP, cable, 8 ft 543867 SMT-8M-PS-24V-K-2,5-OE PNP, plug 543866 SMT-8M-PS-24V-K-0,3-M8D NPN, cable, 8 ft 543870 SMT-8M-NS-24V-K-2,5-OE NPN, plug 54387 SMT-8M-NS-24V-K-0,3-M8D Magnetic reed N/O contact Technical data 65 Cable, 8 ft 543862 SME-8M-ZS-24V-K-2,5-OE Plug 54386 SME-8M-DS-24V-K-0,3-M8D Connecting cable, straight socket 8 ft 54333 NEBU-M8G3-K-2.5-LE3 Ordering Data One-way Flow Control Valves for Exhaust Air Flow Control Technical Data 254 Function For [in] Tubing Part No. Type O.D. [in] ¼ Â 534656 GRLA-/8-QB-5/32-U ¼ 534658 GRLA-/8-QB-/4-U Æ, 2 ¼ 53466 GRLA-/4-QB-/4-U y 534663 GRLA-/4-QB-3/8-U 2½ ¼ 534664 GRLA-3/8-QB-/4-U y 534666 GRLA-3/8-QB-3/8-U Ordering Data Push-in Fittings QB Technical Data 246 Function For [in] Tubing Part No. Type O.D. [in] ¼ Â 53327 QB-/8-5/32-U ¼ 533273 QB-/8-/4-U Æ, 2 ¼ 533276 QB-/4-/4-U y 533278 QB-/4-3/8-U 2½ ¼ 533279 QB-3/8-/4-U y 53328 QB-3/8-3/8-U Lead Time LT for all products on this page: D typically ships same day/next day 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 5

Compact Cylinders ADN Inch Series, Based on ISO 2287 Overview Compact cylinders for maximum productivity in confined spaces, combining innovative technology, high performance and reduced installation space requirements Compact cylinder with standard dimensions More than the standard: Piston- ½ to 2 Innovative technology for maximum speeds Flexible in use thanks to customized variants Spare parts service Detailed product information www.festo.com/catalog/adn Product Range Overview Function Version Piston Stroke Force Variants [in] [in] [lbf] A I P A Basic version Double-acting ADN ½, Æ, ¾,, ¼, Æ, 2 0.04 2 5.3 265 Variants A Male thread I Female thread P Flexible cushioning rings/pads at both ends A Position sensing Features Contents Sensor slots on three sides for flush mounting of proximity sensors Integrated cushioning rings for absorbing residual energy at high speeds and machine cycles Centering holes in the end cap match centering pins ZBS Basic Version, Double-acting Technical Data 7 Ordering Data 8 Overview 20 39 6 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Compact Cylinders ADN Inch Series, Based on ISO 2287 Technical Data Materials End caps, cylinder barrel: Anodized aluminum Piston rod, flange screws: High-alloy steel Seals: Polyurethane Technical Data Piston [in] ½ Æ ¾ ¼ Æ 2 Pneumatic connection 0-32 UNF-2B 0-32 UNF-2B 0-32 UNF-2B 0-32 UNF-2B x-27 NPT x-27 NPT x-27 NPT Piston rod thread Female 4-48 UNF-2B M4 0-32 UNF-2B 0-32 UNF-2B Ä-24 UNF-2B Ä-24 UNF-2B Å-24 UNF-2B Male 0-32 UNF-2B 0-32 UNF-2B Ä-24 UNF-2B Ä-24 UNF-2B Å-24 UNF-2B Å-24 UNF-2B ½-20 UNF-2B Cushioning Flexible cushioning rings/pads at both ends Theoretical force [lbf] 5.3 27.2 42.3 66.3 08.6 69.5 264.8 at 90 psi, advancing Theoretical force [lbf].5 20.2 3.7 55.5 93.3 54.2 237.6 at 90 psi, retracting Length at 0 in stroke [in].57.57.69.77.97 2.0 2.09 Width [in]..4.42.57.85 2.7 2.6 Height [in]..4.42.57.85 2.7 2.6 Operating Conditions Piston [in] ½ Æ ¾ ¼ Æ 2 Operating medium Compressed air in accordance with ISO 8573-:200 [7:4:4] Note on operating/pilot medium Operation with lubricated medium possible (in which case lubricated operation will always be required) Operating pressure [psi] 4.5 45 8.7 45 Ambient temperature ) [ F] 4 +76 ) Note operating range of proximity sensors. 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 7

Compact Cylinders ADN Inch Series, Based on ISO 2287 Technical Data Ordering Data Male Piston Rod Thread Piston Stroke Piston Stroke [in] [in] Part No. Type [in] [in] Part No. Type ½ ¼ 55709 ADN-/2 -/4 -A-P-A ½ 557020 ADN-/2 -/2 -A-P-A ¾ 55702 ADN-/2-3/4 -A-P-A 557022 ADN-/2 - -A-P-A ¼ 557023 ADN-/2 - /4 -A-P-A ½ 557024 ADN-/2 - /2 -A-P-A 0.04 8 55708 ADN-/2 - -A-P-A Æ ¼ 557032 ADN-5/8 -/4 -A-P-A ½ 557033 ADN-5/8 -/2 -A-P-A ¾ 557034 ADN-5/8-3/4 -A-P-A 557035 ADN-5/8 - -A-P-A ¼ 557036 ADN-5/8 - /4 -A-P-A ½ 557037 ADN-5/8 - /2 -A-P-A 2 557038 ADN-5/8-2 -A-P-A 0.04 8 55703 ADN-5/8 - -A-P-A ¾ ¼ 557047 ADN-3/4 -/4 -A-P-A ½ 557048 ADN-3/4 -/2 -A-P-A ¾ 557049 ADN-3/4-3/4 -A-P-A 557050 ADN-3/4 - -A-P-A ¼ 55705 ADN-3/4 - /4 -A-P-A ½ 557052 ADN-3/4 - /2 -A-P-A 2 557053 ADN-3/4-2 -A-P-A 2½ 557054 ADN-3/4-2 /2 -A-P-A 0.04 8 557046 ADN-3/4 - -A-P-A ¼ 557064 ADN- -/4 -A-P-A ½ 557065 ADN- -/2 -A-P-A ¾ 557066 ADN- -3/4 -A-P-A 557067 ADN- - -A-P-A ¼ 557068 ADN- - /4 -A-P-A ½ 557069 ADN- - /2 -A-P-A 2 557070 ADN- -2 -A-P-A 2½ 55707 ADN- -2 /2 -A-P-A 0.04 8 557063 ADN- - -A-P-A ¼ ¼ 55708 ADN- /4 -/4 -A-P-A ½ 557082 ADN- /4 -/2 -A-P-A ¾ 557083 ADN- /4-3/4 -A-P-A 557084 ADN- /4 - -A-P-A ¼ 557085 ADN- /4 - /4 -A-P-A ½ 557086 ADN- /4 - /2 -A-P-A 2 557087 ADN- /4-2 -A-P-A 2½ 557088 ADN- /4-2 /2 -A-P-A 3 557089 ADN- /4-3 -A-P-A 0.04 2 557080 ADN- /4 - -A-P-A Æ ¼ 55700 ADN- 5/8 -/4 -A-P-A ½ 5570 ADN- 5/8 -/2 -A-P-A ¾ 55702 ADN- 5/8-3/4 -A-P-A 55703 ADN- 5/8 - -A-P-A ¼ 55704 ADN- 5/8 - /4 -A-P-A ½ 55705 ADN- 5/8 - /2 -A-P-A 2 55706 ADN- 5/8-2 -A-P-A 2½ 55707 ADN- 5/8-2 /2 -A-P-A 3 55708 ADN- 5/8-3 -A-P-A 0.04 2 557099 ADN- 5/8 - -A-P-A 2 ¼ 5579 ADN-2 -/4 -A-P-A ½ 55720 ADN-2 -/2 -A-P-A ¾ 5572 ADN-2-3/4 -A-P-A 55722 ADN-2 - -A-P-A ¼ 55723 ADN-2 - /4 -A-P-A ½ 55724 ADN-2 - /2 -A-P-A 2 55725 ADN-2-2 -A-P-A 2½ 55726 ADN-2-2 /2 -A-P-A 3 55727 ADN-2-3 -A-P-A 0.04 2 5578 ADN-2 - -A-P-A Lead Time LT for all products on this page: 3D typically ships within 3 days 8 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Compact Cylinders ADN Inch Series, Based on ISO 2287 Technical Data Ordering Data Female Piston Rod Thread Piston Stroke Piston Stroke [in] [in] Part No. Type [in] [in] Part No. Type ½ ¼ 557025 ADN-/2 -/4 -I-P-A ½ 557026 ADN-/2 -/2 -I-P-A ¾ 557027 ADN-/2-3/4 -I-P-A 557028 ADN-/2 - -I-P-A ¼ 557029 ADN-/2 - /4 -I-P-A ½ 557030 ADN-/2 - /2 -I-P-A 0.04 8 55708 ADN-/2 - -I-P-A Æ ¼ 557039 ADN-5/8 -/4 -I-P-A ½ 557040 ADN-5/8 -/2 -I-P-A ¾ 55704 ADN-5/8-3/4 -I-P-A 557042 ADN-5/8 - -I-P-A ¼ 557043 ADN-5/8 - /4 -I-P-A ½ 557044 ADN-5/8 - /2 -I-P-A 2 557045 ADN-5/8-2 -I-P-A 0.04 8 55703 ADN-5/8 - -I-P-A ¾ ¼ 557055 ADN-3/4 -/4 -I-P-A ½ 557056 ADN-3/4 -/2 -I-P-A ¾ 557057 ADN-3/4-3/4 -I-P-A 557058 ADN-3/4 - -I-P-A ¼ 557059 ADN-3/4 - /4 -I-P-A ½ 557060 ADN-3/4 - /2 -I-P-A 2 55706 ADN-3/4-2 -I-P-A 2½ 557062 ADN-3/4-2 /2 -I-P-A 0.04 8 557046 ADN-3/4 - -I-P-A ¼ 557072 ADN- -/4 -I-P-A ½ 557073 ADN- -/2 -I-P-A ¾ 557074 ADN- -3/4 -I-P-A 557075 ADN- - -I-P-A ¼ 557076 ADN- - /4 -I-P-A ½ 557077 ADN- - /2 -I-P-A 2 557078 ADN- -2 -I-P-A 2½ 557079 ADN- -2 /2 -I-P-A 0.04 8 557063 ADN- - -I-P-A ¼ ¼ 557090 ADN- /4 -/4 -I-P-A ½ 55709 ADN- /4 -/2 -I-P-A ¾ 557092 ADN- /4-3/4 -I-P-A 557093 ADN- /4 - -I-P-A ¼ 557094 ADN- /4 - /4 -I-P-A ½ 557095 ADN- /4 - /2 -I-P-A 2 557096 ADN- /4-2 -I-P-A 2½ 557097 ADN- /4-2 /2 -I-P-A 3 557098 ADN- /4-3 -I-P-A 0.04 2 557080 ADN- /4 - -I-P-A Æ ¼ 55709 ADN- 5/8 -/4 -I-P-A ½ 5570 ADN- 5/8 -/2 -I-P-A ¾ 557 ADN- 5/8-3/4 -I-P-A 5572 ADN- 5/8 - -I-P-A ¼ 5573 ADN- 5/8 - /4 -I-P-A ½ 5574 ADN- 5/8 - /2 -I-P-A 2 5575 ADN- 5/8-2 -I-P-A 2½ 5576 ADN- 5/8-2 /2 -I-P-A 3 5577 ADN- 5/8-3 -I-P-A 0.04 2 557099 ADN- 5/8 - -I-P-A 2 ¼ 55728 ADN-2 -/4 -I-P-A ½ 55729 ADN-2 -/2 -I-P-A ¾ 55730 ADN-2-3/4 -I-P-A 5573 ADN-2 - -I-P-A ¼ 55732 ADN-2 - /4 -I-P-A ½ 55733 ADN-2 - /2 -I-P-A 2 55734 ADN-2-2 -I-P-A 2½ 55735 ADN-2-2 /2 -I-P-A 3 55736 ADN-2-3 -I-P-A 0.04 2 5578 ADN-2 - -I-P-A Lead Time LT for all products on this page: 3D typically ships within 3 days 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 9

Compact Cylinders ADN Inch Series, Based on ISO 2287 Overview Peripherals Overview 8 4 2 5 af ag aj aa ac ab ad ae bc bd 7 7 3 6 9 ah ai bj aj 8 2 bb ba Page/Internet Foot mounting HNA 2 2 Flange mounting FNC 2 3 Swivel flange SNCL 2 4 Swivel flange SNCB 2 5 Clevis foot LBN 2 6 Multi-position kit DPNA 2 7 Trunnion flange ZNCF 2 8 Trunnion support LNZG 2 9 Swivel flange SNCS 2 aj Clevis foot LBG 2 aa Rod eye SGS 22 ab Coupling piece KSG/KSZ ksg, ksz ac Adapter AD ad ad Rod clevis SG 22 ae Self-aligning rod coupler FK 22 af Right-angle clevis foot LQG lqg ag Rod clevis SGA sga ah Proximity sensor SME-/SMT-8 22 ai Proximity sensor SME-/SMT-8M 22 bj Slot cover ABP-5-S abp ba Proximity sensor SMPO-8E smpo bb Mounting kit SMB-8E smb bc One-way flow control valve GRLA 22 bd Push-in fitting QB 22 Page/Internet 20 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Compact Cylinders ADN Inch Series, Based on ISO 2287 Ordering Data Mounting Attachments Technical Data www.festo.com/catalog/<type> or <order code> For Part No. Type Foot mounting Flange mounting Swivel flange Swivel flange Swivel flange 2 537237 HNA-2 6 537238 HNA-6 20 537239 HNA-20 25 537240 HNA-25 32 53724 HNA-32 40 537242 HNA-40 50 537243 HNA-50 2 537245 FNC-2 6 537246 FNC-6 20 537247 FNC-20 25 537248 FNC-25 32 74376 FNC-32 40 74377 FNC-40 50 74378 FNC-50 2 537790 SNCL-2 6 53779 SNCL-6 20 537792 SNCL-20 25 537793 SNCL-25 32 74404 SNCL-32 40 74405 SNCL-40 50 74406 SNCL-50 32 74397 SNCS-32 40 74398 SNCS-40 50 74399 SNCS-50 32 74390 SNCB-32 40 7439 SNCB-40 50 74392 SNCB-50 Ordering Data Mounting Attachments Technical Data www.festo.com/catalog/<type> or <order code> For Part No. Type Trunnion flange Trunnion support Clevis foot Clevis foot Multi-position kit 32 744 ZNCF-32 40 7442 ZNCF-40 50 7443 ZNCF-50 32 32959 LNZG-32 40, 50 32960 LNZG-40/50 8, 0 6057 LBN-8/0 2, 6 6058 LBN-2/6 20, 25 6059 LBN-20/25 32 376 LBG-32 40 3762 LBG-40 50 3763 LBG-50 2 537263 DPNA-2 6 537264 DPNA-6 20 537265 DPNA-20 25 537266 DPNA-25 32 537267 DPNA-32 40 537268 DPNA-40 50 537269 DPNA-50 Lead Time LT for all products on this page: D typically ships same day/next day 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 2

Compact Cylinders ADN Inch Series, Based on ISO 2287 Ordering Data Piston Rod Attachments Technical Data www.festo.com/catalog/<type> or <order code> Designation For [in] Part No. Type Rod eye SGS Rod clevis SG /2, 5/8 532694 SGS-0-32 3/4 532695 SGS-5/6-24, -/4 532696 SGS-3/8-24 -5/8 532697 SGS-/2-20 2 532698 SGS-5/8-8 /2, 5/8 546552 SG-UNF0-32-B 3/4 546574 SG-UNF5/6-24-B, -/4 546540 SG-UNF3/8-24-B -5/8 546545 SG-UNF/2-20-B 2 546575 SG-UNF5/8-8-B Self-aligning rod coupler FK /2, 5/8 532703 FK-0-32 3/4 532704 FK-5/6-24, -/4 532705 FK-3/8-24 -5/8 532706 FK-/2-20 2 532707 FK-5/8-8 Ordering Data One-way Flow Control Valves for Exhaust Air Flow Control Technical Data 254 Function For [in] Tubing O.D. [in] Part No. Type /2, 5/8, 3/4, -/4, -5/8, 2 Ordering Data Push-in Fittings QB Function For [in] Tubing O.D. [in] /2, 5/8, 3/4, -/4, -5/8, 2 Â 564840 GRLA-0-32-UNF-QB-5/32-U ¼ 564842 GRLA-0-32-UNF-QB-/4-U Â 534656 GRLA-/8-QB-5/32-U ¼ 534658 GRLA-/8-QB-/4-U Part No. Type Technical Data 246 Â 533267 QB-0-32-UNF-5/32-U ¼ 533269 QB-0-32-UNF-/4-U Â 53327 QB-/8-5/32-U ¼ 533273 QB-/8-/4-U Ordering Data Proximity Sensors and Connecting Cables Description Part No. Type Proximity sensor for T-slot, magneto-resistive N/O contact Technical data 64 PNP, cable, 8 ft 543867 SMT-8M-PS-24V-K-2,5-OE PNP, plug 543866 SMT-8M-PS-24V-K-0,3-M8D NPN, cable, 8 ft 543870 SMT-8M-NS-24V-K-2,5-OE NPN, plug 54387 SMT-8M-NS-24V-K-0,3-M8D Magnetic reed N/O contact Technical data 65 Cable, 8 ft 543862 SME-8M-ZS-24V-K-2,5-OE Plug 54386 SME-8M-DS-24V-K-0,3-M8D Connecting cable, straight socket 8 ft 54333 NEBU-M8G3-K-2.5-LE3 Lead Time LT for all products on this page: D typically ships same day/next day 22 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Standard Cylinders DSNU Metric Series, to ISO 6432 Overview DSNU Standard Cylinders meet ISO 6432 mounting, rod, bore and thread dimension specifications for easy interchangeability. Piston 8 to 25 mm Stroke lengths up to 500 mm Double-acting Meets the highest requirements for running characteristics, service life and load carrying ability Extensive range of accessories Detailed product information www.festo.com/catalog/dsnu Product Range Overview Function Version Piston Stroke Force Variants [mm] [mm] [N] P PPV A Double-acting DSNU Basic version 8, 0, 2 500 30 68 6, 20, 25 2 295 Variants P Flexible cushioning rings/pads at both ends PPV Pneumatic cushioning adjustable at both ends A Position sensing Contents Technical Data 24 Ordering Data 25 Overview 26 27 Note: All metric products can be used within inch tubing systems via hybrid fittings ( Overview on page 24) 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 23

Standard Cylinders DSNU Metric Series, to ISO 6432 Technical Data Materials End caps: Wrought aluminum alloy Housing: High-alloy stainless steel Piston rod: High-alloy steel Seals: Polyurethane, nitrile rubber Technical Data Piston 8 0 2 6 20 25 Pneumatic connection M5 M5 M5 M5 Gx Gx End of piston rod Male thread Piston rod thread M4 M4 M6 M6 M8 M0x.25 Cushioning Flexible cushioning rings/pads at both ends Pneumatic cushioning adjustable at both ends Cushioning length ) [mm] 9 2 5 7 Theoretical force at 6 bar, advancing [N] 30 47 68 2 89 295 Theoretical force at 6 bar, retracting [N] 23 40 5 04 58 247 Max. torque at the piston rod 2) [Nm] 0.0 0.0 0.20 0.45 /length at 0 mm stroke [mm] 9/86 9/86 24/05 24/ 32/32 32/4 ) Applies exclusively to pneumatic cushioning adjustable at both ends (PPV). 2) Applies exclusively to variants with protection against rotation (Q). Operating Conditions Piston 8 0 25 Operating medium Compressed air in accordance with ISO 8573-:200 [7:4:4] Note on operating/pilot medium Operation with lubricated medium possible (in which case lubricated operation will always be required) Operating pressure [bar].5 0 0 ) Ambient temperature 2) [ C] 20 +80 ) Piston 2 mm, pneumatic cushioning adjustable at both ends: 2 0 bar. 2) Note operating range of proximity sensors. 24 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Standard Cylinders DSNU Metric Series, to ISO 6432 Ordering Data Ordering Data Piston Stroke Piston Stroke [mm] [mm] Part No. Type LT [mm] [mm] Part No. Type LT 8 0 977 DSNU-8-0-P-A D 25 978 DSNU-8-25-P-A D 40 979 DSNU-8-40-P-A D 50 980 DSNU-8-50-P-A D 80 98 DSNU-8-80-P-A 3D 00 982 DSNU-8-00-P-A 3D 200 4326 DSNU-8- -P-A 3D 0 0 983 DSNU-0-0-P-A D 25 984 DSNU-0-25-P-A D 40 985 DSNU-0-40-P-A D 50 986 DSNU-0-50-P-A D 80 987 DSNU-0-80-P-A 3D 00 988 DSNU-0-00-P-A 3D 200 4325 DSNU-0- -P-A 3D 2 0 989 DSNU-2-0-P-A D 25 990 DSNU-2-25-P-A D 40 99 DSNU-2-40-P-A D 50 992 DSNU-2-50-P-A D 80 993 DSNU-2-80-P-A 3D 00 994 DSNU-2-00-P-A 3D 25 995 DSNU-2-25-P-A 3D 60 996 DSNU-2-60-P-A 3D 200 997 DSNU-2-200-P-A 3D 200 4324 DSNU-2- -P-A 3D 6 25 33973 DSNU-6-25-PPV-A D 40 9229 DSNU-6-40-PPV-A D 50 9230 DSNU-6-50-PPV-A D 80 923 DSNU-6-80-PPV-A 3D 00 9232 DSNU-6-00-PPV-A 3D 25 9233 DSNU-6-25-PPV-A 3D 60 9234 DSNU-6-60-PPV-A 3D 200 9235 DSNU-6-200-PPV-A 3D 320 4320 DSNU-6- -PPV-A 3D 20 25 33974 DSNU-20-25-PPV-A D 40 9236 DSNU-20-40-PPV-A D 50 9237 DSNU-20-50-PPV-A D 80 9238 DSNU-20-80-PPV-A D 00 9239 DSNU-20-00-PPV-A D 25 9240 DSNU-20-25-PPV-A D 60 924 DSNU-20-60-PPV-A D 200 9242 DSNU-20-200-PPV-A D 250 9243 DSNU-20-250-PPV-A D 300 9244 DSNU-20-300-PPV-A D 320 34720 DSNU-20-320-PPV-A 3D 320 432 DSNU-20- -PPV-A 3D 25 25 33975 DSNU-25-25-PPV-A D 40 9245 DSNU-25-40-PPV-A D 50 9246 DSNU-25-50-PPV-A D 80 9247 DSNU-25-80-PPV-A D 00 9248 DSNU-25-00-PPV-A D 25 9249 DSNU-25-25-PPV-A D 60 9250 DSNU-25-60-PPV-A D 200 925 DSNU-25-200-PPV-A D 250 9252 DSNU-25-250-PPV-A D 300 9253 DSNU-25-300-PPV-A D 320 3472 DSNU-25-320-PPV-A 3D 400 3593 DSNU-25-400-PPV-A 3D 500 3594 DSNU-25-500-PPV-A 3D 500 4322 DSNU-25- -PPV-A 3D LT = Lead time D typically ships same day/next day 3D typically ships within 3 days 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 25

Standard Cylinders DSNU Metric Series, to ISO 6432 Peripherals Overview 9 6 aa 5 ah aj ab ac 7 ae 8 2 ad ag 3 4 5 af 6 7 8 Page/Internet Rod eye SGS 27 2 Coupling piece KSG/KSZ ksg, ksz 3 Rod clevis SG 27 4 Self-aligning rod coupler FK 27 5 Flange mounting FBN 27 6 Foot mounting HBN 27 7 Swivel mounting WBN 27 8 Swivel mounting SBN sbn 9 Clevis foot LBN 27 Page/Internet aj One-way flow control valve GRLA 27 aa Push-in fitting QS 27 ab Mounting kit SMBR smbr ac Proximity sensor SMEO/SMTO-4 smto ad Mounting kit SMBR-8 27 ae Proximity sensor SME/SMT-8 27 af Mounting kit SMBR-0 smbr-0 ag Proximity sensor SME/SMT-0 27 ah Guide unit FEN fen 26 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Standard Cylinders DSNU Metric Series, to ISO 6432 Ordering Data Mounting Attachments Technical Data www.festo.com/catalog/<type> or <order code> Designation For [mm] Part No. Type Foot mounting Flange mounting Swivel mounting Clevis foot 8, 0 523 HBN-8/0x 2, 6 525 HBN-2/6x 20, 25 527 HBN-20/25x 8, 0 524 HBN-8/0x2 2, 6 526 HBN-2/6x2 20, 25 528 HBN-20/25x2 8, 0 529 FBN-8/0 2, 6 530 FBN-2/6 20, 25 53 FBN-20/25 8, 0 8608 WBN-8/0 2, 6 8609 WBN-2/6 20, 25 860 WBN-20/25 8, 0 6057 LBN-8/0 2, 6 6058 LBN-2/6 20, 25 6059 LBN-20/25 Ordering Data Piston Rod Attachments Technical Data www.festo.com/catalog/<type> or <order code> Designation For [mm] Part No. Type Rod eye 8, 0 9253 SGS-M4 2, 6 9254 SGS-M6 20 9255 SGS-M8 25 926 SGS-M0x,25 Rod clevis 8, 0 6532 SG-M4 2, 6 30 SG-M6 20 3 SG-M8 25 644 SG-M0x,25 Self-aligning rod coupler 8, 0 6528 FK-M4 2, 6 206 FK-M6 20 2062 FK-M8 25 640 FK-M0x,25 Ordering Data Proximity Sensors and Connecting Cables Description Part No. Type Proximity sensor for C-slot, magneto-resistive N/O contact Technical data 68 PNP, cable, 2.5 m 55373 SMT-0M-PS-24V-E-2,5-L-OE PNP, plug 55375 SMT-0M-PS-24V-E-0,3-L-M8D Magnetic reed N/O contact Technical data 69 Cable, 2.5 m 55369 SME-0M-ZS-24V-E-2,5-L-OE Plug 55367 SME-0M-DS-24V-E-0,3-L-M8D Proximity sensor for T-slot, magneto-resistive N/O contact Technical data 64 PNP, cable, 8 ft 543867 SMT-8M-PS-24V-K-2,5-OE PNP, plug 543866 SMT-8M-PS-24V-K-0,3-M8D NPN, cable, 8 ft 543870 SMT-8M-NS-24V-K-2,5-OE NPN, plug 54387 SMT-8M-NS-24V-K-0,3-M8D Magnetic reed N/O contact Technical data 65 Cable, 8 ft 543862 SME-8M-ZS-24V-K-2,5-OE Plug 54386 SME-8M-DS-24V-K-0,3-M8D Connecting cable, straight socket 8 ft 54333 NEBU-M8G3-K-2.5-LE3 Ordering Data Mounting Kits for Proximity Sensors SMT/SME-8 For [in] Part No. Type 5/6 7509 SMBR-8-8 3/8 75092 SMBR-8-0 /2 75093 SMBR-8-2 5/8 75094 SMBR-8-6 3/4 75095 SMBR-8-20 75096 SMBR-8-25 Ordering Data One-way Flow Control Valves for Exhaust Air Flow Control Technical Data 254 Function For [mm] 8, 0, 2, 6 Tubing O.D. [mm] Part No. Type 4 97577 GRLA-M5-QS-4-RS-D 6 97578 GRLA-M5-QS-6-RS-D 20, 25 4 97580 GRLA-/8-QS-4-RS-D 6 9758 GRLA-/8-QS-6-RS-D Ordering Data Push-in Fittings QB Technical Data 246 Function For [mm] Tubing O.D. [mm] Part No. Type 8, 0, 2, 6 4 53304 QSM-M5-4 6 53306 QSM-M5-6 20, 25 4 5300 QS-/8-4 6 53002 QS-/8-6 Lead Time LT for all products on this page: D typically ships same day/next day 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 27

Standard Cylinders DNC Metric Series, to ISO 5552 DNC Standard Cylinders meet ISO 5552 mounting, rod, bore and thread dimension specifications for easy interchangeability. Piston 32 to 63 mm Strokes of up to 2,000 mm Profile slot for proximity sensor on 3 sides Numerous variants for customized applications Spare parts service Detailed product information www.festo.com/catalog/dnc Product Range Overview Function Version Piston Stroke Force Variants [mm] [mm] [N] PPV A Double-acting DNC 32, 40, 50, 63 0 2,000 45,870 Variants PPV Pneumatic cushioning adjustable at both ends A Position sensing Contents Technical Data 29 Ordering Data 30 Overview 3 32 Note: All metric products can be used within inch tubing systems via hybrid fittings ( Overview on page 24) 28 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Standard Cylinders DNC Metric Series, to ISO 5552 Technical Data Materials Bearing and end caps: Die-cast aluminum Profile barrel: Anodized aluminum Piston rod: High-alloy steel Seals: Polyurethane Technical Data Piston 32 40 50 63 Pneumatic connection Gx G¼ G¼ Gy End of piston rod Male thread Piston rod thread M0x.25 M2x.25 M6x.5 M6x.5 Cushioning Pneumatic cushioning adjustable at both ends Cushioning length [mm] 20 20 22 22 Theoretical force at [N] 483 754,78,870 6 bar, advancing Theoretical force at [N] 45 633 990,682 6 bar, retracting Length at 0 mm stroke [mm] 46 63 79 94 Width [mm] 45 54 64 75 Height [mm] 45 54 64 75 Operating Conditions Operating medium Compressed air in accordance with ISO 8573-:200 [7:4:4] Note on operating/pilot medium Operation with lubricated medium possible (in which case lubricated operation will always be required) Operating pressure [bar] 0.6 2 Ambient temperature ) [ C] 20 +80 ) Note operating range of proximity sensors. 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 29

Standard Cylinders DNC Metric Series, to ISO 5552 Ordering Data Ordering Data Piston Stroke Piston Stroke [mm] [mm] Part No. Type LT [mm] [mm] Part No. Type LT 32 25 63305 DNC-32-25-PPV-A D 40 63306 DNC-32-40-PPV-A D 50 63307 DNC-32-50-PPV-A D 80 63308 DNC-32-80-PPV-A D 00 63309 DNC-32-00-PPV-A D 25 6330 DNC-32-25-PPV-A D 60 633 DNC-32-60-PPV-A D 200 6332 DNC-32-200-PPV-A D 250 6333 DNC-32-250-PPV-A 3D 320 6334 DNC-32-320-PPV-A 3D 400 6335 DNC-32-400-PPV-A 3D 500 6336 DNC-32-500-PPV-A 3D 0 2,000 63304 DNC-32- -PPV-A 3D 40 25 63337 DNC-40-25-PPV-A D 40 63338 DNC-40-40-PPV-A D 50 63339 DNC-40-50-PPV-A D 80 63340 DNC-40-80-PPV-A D 00 6334 DNC-40-00-PPV-A D 25 63342 DNC-40-25-PPV-A D 60 63343 DNC-40-60-PPV-A D 200 63344 DNC-40-200-PPV-A D 250 63345 DNC-40-250-PPV-A 3D 320 63346 DNC-40-320-PPV-A 3D 400 63347 DNC-40-400-PPV-A 3D 500 63348 DNC-40-500-PPV-A 3D 0 2,000 63336 DNC-40- -PPV-A 3D 50 25 63369 DNC-50-25-PPV-A D 40 63370 DNC-50-40-PPV-A D 50 6337 DNC-50-50-PPV-A D 80 63372 DNC-50-80-PPV-A D 00 63373 DNC-50-00-PPV-A D 25 63374 DNC-50-25-PPV-A D 60 63375 DNC-50-60-PPV-A D 200 63376 DNC-50-200-PPV-A D 250 63377 DNC-50-250-PPV-A 3D 320 63378 DNC-50-320-PPV-A 3D 400 63379 DNC-50-400-PPV-A 3D 500 63380 DNC-50-500-PPV-A 3D 0 2,000 63368 DNC-50- -PPV-A 3D 63 25 6340 DNC-63-25-PPV-A D 40 63402 DNC-63-40-PPV-A D 50 63403 DNC-63-50-PPV-A D 80 63404 DNC-63-80-PPV-A D 00 63405 DNC-63-00-PPV-A D 25 63406 DNC-63-25-PPV-A D 60 63407 DNC-63-60-PPV-A D 200 63408 DNC-63-200-PPV-A D 250 63409 DNC-63-250-PPV-A 3D 320 6340 DNC-63-320-PPV-A 3D 400 634 DNC-63-400-PPV-A 3D 500 6342 DNC-63-500-PPV-A 3D 0 2,000 63400 DNC-63- -PPV-A 3D LT = Lead time D typically ships same day/next day 3D typically ships within 3 days 30 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Standard Cylinders DNC Metric Series, to ISO 5552 Peripherals Overview 2 3 bg 4 bh 5 6 7 9 8 aj aa ab ab ac ad 5 af af ae bf ag ah aj ai bj ba bb be bd 2 3 4 5 bc Multi-position kit DPNC dpnc 2 Foot mounting HNC 32 3 Flange mounting FNC 32 4 Trunnion flange ZNCF 32 5 Trunnion support LNZG 32 6 Swivel flange SNC 32 7 Clevis foot LSNG 32 8 Clevis foot LSNSG lsnsg 9 Swivel flange SNCS 32 aj Clevis foot LBG 32 aa Swivel flange SNCL 32 ab Swivel flange SNCB 32 ac Clevis foot LNG 32 ad Clevis foot LSN 32 Page/Internet ae Trunnion mounting kit ZNCM 32 af Rod eye SGS 33 ag Right-angle clevis foot LQG lqg ah Rod clevis SGA sga ai Coupling piece KSG ksg bj Rod clevis SG 33 ba Self-aligning rod coupler FK 33 bb Adapter AD ad bc Guide unit FENG feng bd Mounting kit SMB-8-FENG feng be Slot cover ABP-5-S abp-s bf Proximity sensor SME/SMT-8 33 bg One-way flow control valve GRLA 5 bh Push-in fitting QS 33 Page/Internet 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 3

Standard Cylinders DNC Metric Series, to ISO 5552 Ordering Data Mounting Attachments Technical Data www.festo.com/catalog/<type> or <order code> For Part No. Type Ordering Data Mounting Attachments Technical Data www.festo.com/catalog/<type> or <order code> For Part No. Type Foot mounting HNC Swivel flange SNCS 32 74369 HNC-32 40 74370 HNC-40 50 7437 HNC-50 63 74372 HNC-63 Flange mounting FNC 32 74376 FNC-32 40 74377 FNC-40 50 74378 FNC-50 63 74379 FNC-63 Trunnion flange ZNCF 32 744 ZNCF-32 40 7442 ZNCF-40 50 7443 ZNCF-50 63 7444 ZNCF-63 Swivel flange SNCL Clevis foot LSNG Clevis foot LBG 32 74397 SNCS-32 40 74398 SNCS-40 50 74399 SNCS-50 63 74400 SNCS-63 32 74404 SNCL-32 40 74405 SNCL-40 50 74406 SNCL-50 63 74407 SNCL-63 32 3740 LSNG-32 40 374 LSNG-40 50 3742 LSNG-50 63 3743 LSNG-63 Trunnion mounting kit ZNCM 32 63525 ZNCM-32 40 63526 ZNCM-40 50 63527 ZNCM-50 63 63528 ZNCM-63 Trunnion support LNZG 32 32959 LNZG-32 40, 50 32960 LNZG-40/50 63 3296 LNZG-63/80 Swivel flange SNC 32 74383 SNC-32 40 74384 SNC-40 50 74385 SNC-50 63 74386 SNC-63 Clevis foot LSN Clevis foot LNG 32 376 LBG-32 40 3762 LBG-40 50 3763 LBG-50 63 3764 LBG-63 32 556 LSN-32 40 5562 LSN-40 50 5563 LSN-50 63 5564 LSN-63 32 33890 LNG-32 40 3389 LNG-40 50 33892 LNG-50 63 33893 LNG-63 Swivel flange SNCB 32 74390 SNCB-32 40 7439 SNCB-40 50 74392 SNCB-50 63 74393 SNCB-63 Lead Time LT for all products on this page: D typically ships same day/next day 32 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Standard Cylinders DNC Metric Series, to ISO 5552 Ordering Data Piston Rod Attachments Technical Data www.festo.com/catalog/<type> or <order code> For Part No. Type Rod eye SGS Rod clevis SG 32 926 SGS-M0x,25 40 9262 SGS-M2x,25 50, 63 9263 SGS-M6x,5 32 644 SG-M0x,25 40 645 SG-M2x,25 50, 63 646 SG-M6x,5 Self-aligning rod coupler FK 32 640 FK-M0x,25 40 64 FK-M2x,25 50, 63 642 FK-M6x,5 Ordering Data Proximity Sensors and Connecting Cables Description Part No. Type Proximity sensor for T-slot, magneto-resistive N/O contact Technical data 64 PNP, cable, 2.5 m 543867 SMT-8M-PS-24V-K-2,5-OE PNP, plug 543866 SMT-8M-PS-24V-K-0,3-M8D NPN, cable, 2.5 m 543870 SMT-8M-NS-24V-K-2,5-OE NPN, plug 54387 SMT-8M-NS-24V-K-0,3-M8D Magnetic reed N/O contact Technical data 65 Cable, 2.5 m 543862 SME-8M-ZS-24V-K-2,5-OE Plug 54386 SME-8M-DS-24V-K-0,3-M8D Connecting cable, straight socket 2.5 m 54333 NEBU-M8G3-K-2.5-LE3 Ordering Data One-way Flow Control Valves for Exhaust Air Flow Control Technical Data 254 Function For [mm] Tubing Part No. Type O.D. [mm] 32 4 97580 GRLA-/8-QS-4-RS-D 6 9758 GRLA-/8-QS-6-RS-D 40, 50 6 62967 GRLA-/4-QS-6-RS-B 8 62968 GRLA-/4-QS-8-RS-B 63 6 62969 GRLA-3/8-QS-6-RS-B 8 62970 GRLA-3/8-QS-8-RS-B Ordering Data Push-in Fittings QB Function For [mm] Tubing O.D. [mm] Part No. Type 32 4 5300 QS-/8-4 6 53002 QS-/8-6 40, 50 6 53003 QS-/4-6 8 53005 QS-/4-8 63 6 90645 QS-3/8-6 8 53006 QS-3/8-8 Technical Data 246 Lead Time LT for all products on this page: D typically ships same day/next day 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 33

Compact Cylinders ADN Metric Series, to ISO 2287 Overview Compact cylinders for maximum productivity in confined spaces, combining innovative technology, high performance and reduced installation space requirements Compact cylinder with standard dimensions More than the standard: 2 to 50 mm Innovative technology for maximum speeds Flexible in use thanks to customized variants Spare parts service Detailed product information www.festo.com/catalog/adn Product Range Overview Function Version Piston Stroke Force Variants [mm] [mm] [N] A I P A Basic version Double-acting ADN 2, 6, 20, 25, 32, 40, 50 300 68,78 Variants A Male thread I Female thread P Flexible cushioning rings/pads at both ends A Position sensing Features Contents Sensor slots on three sides for flush mounting of proximity sensors Integrated cushioning rings for absorbing residual energy at high speeds and machine cycles Centering holes in the end cap match centering pins ZBS Basic Version, Double-acting Technical Data 35 Ordering Data 36 Overview 38 39 Note: All metric products can be used within inch tubing systems via hybrid fittings ( Overview on page 24) 34 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Compact Cylinders ADN Metric Series, to ISO 2287 Technical Data Materials End caps, cylinder barrel: Anodized aluminum Piston rod, flange screws: High-alloy steel Seals: Polyurethane Technical Data Piston 2 6 20 25 32 40 50 Pneumatic connection M5 M5 M5 M5 Gx Gx Gx Piston rod thread Female M3 M4 M6 M6 M8 M8 M0x.25 Male M5 M6 M8 M8 M0x.25 M0x.25 M2x.25 Cushioning Flexible cushioning rings/pads at both ends Theoretical force [N] 68 2 88 295 483 754,78 at 6 bar, advancing Theoretical force [N] 5 90 4 247 45 686,057 at 6 bar, retracting Length at 0 mm stroke [mm] 40 40 43 45 50 5 53 Width [mm] 28 29 36 40 47 55 66 Height [mm] 28 29 36 40 47 55 66 Operating Conditions Piston 2 6 20 25 32 40 50 Operating medium Compressed air in accordance with ISO 8573-:200 [7:4:4] Note on operating/pilot medium Operation with lubricated medium possible (in which case lubricated operation will always be required) Operating pressure [bar] 0 0.6 0 Ambient temperature ) [ C] 20 +80 ) Note operating range of proximity sensors. 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 35

Compact Cylinders ADN Metric Series, to ISO 2287 Ordering Data Ordering Data Male Piston Rod Thread Piston Stroke Piston Stroke [mm] [mm] Part No. Type [mm] [mm] Part No. Type 2 5 536204 ADN-2-5-A-P-A 0 536205 ADN-2-0-A-P-A 5 536206 ADN-2-5-A-P-A 20 536207 ADN-2-20-A-P-A 25 536208 ADN-2-25-A-P-A 30 536209 ADN-2-30-A-P-A 40 53620 ADN-2-40-A-P-A 200 536203 ADN-2- -A-P-A 6 5 53629 ADN-6-5-A-P-A 0 536220 ADN-6-0-A-P-A 5 53622 ADN-6-5-A-P-A 20 536222 ADN-6-20-A-P-A 25 536223 ADN-6-25-A-P-A 30 536224 ADN-6-30-A-P-A 40 536225 ADN-6-40-A-P-A 50 53633 ADN-6-50-A-P-A 200 53628 ADN-6- -A-P-A 20 5 536234 ADN-20-5-A-P-A 0 536235 ADN-20-0-A-P-A 5 536236 ADN-20-5-A-P-A 20 536237 ADN-20-20-A-P-A 25 536238 ADN-20-25-A-P-A 30 536239 ADN-20-30-A-P-A 40 536240 ADN-20-40-A-P-A 50 53624 ADN-20-50-A-P-A 60 536352 ADN-20-60-A-P-A 200 536233 ADN-20- -A-P-A 25 5 53625 ADN-25-5-A-P-A 0 536252 ADN-25-0-A-P-A 5 536253 ADN-25-5-A-P-A 20 536254 ADN-25-20-A-P-A 25 536255 ADN-25-25-A-P-A 30 536256 ADN-25-30-A-P-A 40 536257 ADN-25-40-A-P-A 50 536258 ADN-25-50-A-P-A 60 536373 ADN-25-60-A-P-A 200 536250 ADN-25- -A-P-A 32 5 536268 ADN-32-5-A-P-A 0 536269 ADN-32-0-A-P-A 5 536270 ADN-32-5-A-P-A 20 53627 ADN-32-20-A-P-A 25 536272 ADN-32-25-A-P-A 30 536273 ADN-32-30-A-P-A 40 536274 ADN-32-40-A-P-A 50 536275 ADN-32-50-A-P-A 60 536276 ADN-32-60-A-P-A 80 536277 ADN-32-80-A-P-A 300 536267 ADN-32- -A-P-A 40 5 536289 ADN-40-5-A-P-A 0 536290 ADN-40-0-A-P-A 5 53629 ADN-40-5-A-P-A 20 536292 ADN-40-20-A-P-A 25 536293 ADN-40-25-A-P-A 30 536294 ADN-40-30-A-P-A 40 536295 ADN-40-40-A-P-A 50 536296 ADN-40-50-A-P-A 60 536297 ADN-40-60-A-P-A 80 536298 ADN-40-80-A-P-A 300 536288 ADN-40- -A-P-A 50 5 53630 ADN-50-5-A-P-A 0 5363 ADN-50-0-A-P-A 5 53632 ADN-50-5-A-P-A 20 53633 ADN-50-20-A-P-A 25 53634 ADN-50-25-A-P-A 30 53635 ADN-50-30-A-P-A 40 53636 ADN-50-40-A-P-A 50 53637 ADN-50-50-A-P-A 60 53638 ADN-50-60-A-P-A 80 53639 ADN-50-80-A-P-A 300 536309 ADN-50- -A-P-A Lead Time LT for all products on this page: 3D typically ships within 3 days 36 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Compact Cylinders ADN Metric Series, to ISO 2287 Ordering Data Ordering Data Female Piston Rod Thread Piston Stroke Piston Stroke [mm] [mm] Part No. Type [mm] [mm] Part No. Type 2 5 5362 ADN-2-5-I-P-A 0 53622 ADN-2-0-I-P-A 5 53623 ADN-2-5-I-P-A 20 53624 ADN-2-20-I-P-A 25 53625 ADN-2-25-I-P-A 30 53626 ADN-2-30-I-P-A 40 53627 ADN-2-40-I-P-A 200 536203 ADN-2- -I-P-A 6 5 536226 ADN-6-5-I-P-A 0 536227 ADN-6-0-I-P-A 5 536228 ADN-6-5-I-P-A 20 536229 ADN-6-20-I-P-A 25 536230 ADN-6-25-I-P-A 30 53623 ADN-6-30-I-P-A 40 536232 ADN-6-40-I-P-A 50 53634 ADN-6-50-I-P-A 200 53628 ADN-6- -I-P-A 20 5 536242 ADN-20-5-I-P-A 0 536243 ADN-20-0-I-P-A 5 536244 ADN-20-5-I-P-A 20 536245 ADN-20-20-I-P-A 25 536246 ADN-20-25-I-P-A 30 536247 ADN-20-30-I-P-A 40 536248 ADN-20-40-I-P-A 50 536249 ADN-20-50-I-P-A 60 536362 ADN-20-60-I-P-A 200 536233 ADN-20- -I-P-A 25 5 536259 ADN-25-5-I-P-A 0 536260 ADN-25-0-I-P-A 5 53626 ADN-25-5-I-P-A 20 536262 ADN-25-20-I-P-A 25 536263 ADN-25-25-I-P-A 30 536264 ADN-25-30-I-P-A 40 536265 ADN-25-40-I-P-A 50 536266 ADN-25-50-I-P-A 60 536383 ADN-25-60-I-P-A 200 536250 ADN-25- -I-P-A 32 5 536278 ADN-32-5-I-P-A 0 536279 ADN-32-0-I-P-A 5 536280 ADN-32-5-I-P-A 20 53628 ADN-32-20-I-P-A 25 536282 ADN-32-25-I-P-A 30 536283 ADN-32-30-I-P-A 40 536284 ADN-32-40-I-P-A 50 536285 ADN-32-50-I-P-A 60 536286 ADN-32-60-I-P-A 80 536287 ADN-32-80-I-P-A 300 536267 ADN-32- -I-P-A 40 5 536299 ADN-40-5-I-P-A 0 536300 ADN-40-0-I-P-A 5 53630 ADN-40-5-I-P-A 20 536302 ADN-40-20-I-P-A 25 536303 ADN-40-25-I-P-A 30 536304 ADN-40-30-I-P-A 40 536305 ADN-40-40-I-P-A 50 536306 ADN-40-50-I-P-A 60 536307 ADN-40-60-I-P-A 80 536308 ADN-40-80-I-P-A 300 536288 ADN-40- -I-P-A 50 5 536320 ADN-50-5-I-P-A 0 53632 ADN-50-0-I-P-A 5 536322 ADN-50-5-I-P-A 20 536323 ADN-50-20-I-P-A 25 536324 ADN-50-25-I-P-A 30 536325 ADN-50-30-I-P-A 40 536326 ADN-50-40-I-P-A 50 536327 ADN-50-50-I-P-A 60 536328 ADN-50-60-I-P-A 80 536329 ADN-50-80-I-P-A 300 536309 ADN-50- -I-P-A Lead Time LT for all products on this page: 3D typically ships within 3 days 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 37

Compact Cylinders ADN, to ISO 2287 Overview Peripherals Overview 8 4 2 5 af ag aj aa ac ab ad ae bc bd 7 7 3 6 9 ah ai bj aj 8 2 bb ba Variants and Foot mounting HNA 39 2 Flange mounting FNC 39 3 Swivel flange SNCL 39 4 Swivel flange SNCB 39 5 Clevis foot LBN 39 6 Multi-position kit DPNA 39 7 Trunnion flange ZNCF 39 8 Trunnion support LNZG 39 9 Swivel flange SNCS 39 aj Clevis foot LBG 39 aa Rod eye SGS 40 ab Coupling piece KSG ksg Page/Internet Variants and ac Adapter AD ad ad Rod clevis SG 40 ae Self-aligning rod coupler FK 40 af Right-angle clevis foot LQG lqg ag Rod clevis SGA sga ah Proximity sensor SME-/SMT-8 40 ai Proximity sensor SME-/SMT-8M 40 bj Slot cover ABP-5-S abp ba Proximity sensor SMPO-8E smpo bb Mounting kit SMB-8E smb bc One-way flow control valve GRLA/GRLZ 40 bd Push-in fitting QS 40 Page/Internet 38 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Compact Cylinders ADN, to ISO 2287 Ordering Data Mounting Attachments Technical Data www.festo.com/catalog/<type> or <order code> For Part No. Type Foot mounting Flange mounting Swivel flange Swivel flange Swivel flange 2 537237 HNA-2 6 537238 HNA-6 20 537239 HNA-20 25 537240 HNA-25 32 53724 HNA-32 40 537242 HNA-40 50 537243 HNA-50 2 537245 FNC-2 6 537246 FNC-6 20 537247 FNC-20 25 537248 FNC-25 32 74376 FNC-32 40 74377 FNC-40 50 74378 FNC-50 2 537790 SNCL-2 6 53779 SNCL-6 20 537792 SNCL-20 25 537793 SNCL-25 32 74404 SNCL-32 40 74405 SNCL-40 50 74406 SNCL-50 32 74397 SNCS-32 40 74398 SNCS-40 50 74399 SNCS-50 32 74390 SNCB-32 40 7439 SNCB-40 50 74392 SNCB-50 Ordering Data Mounting Attachments Technical Data www.festo.com/catalog/<type> or <order code> For Part No. Type Trunnion flange Trunnion support Clevis foot Clevis foot Multi-position kit 32 744 ZNCF-32 40 7442 ZNCF-40 50 7443 ZNCF-50 32 32959 LNZG-32 40, 50 32960 LNZG-40/50 8, 0 6057 LBN-8/0 2, 6 6058 LBN-2/6 20, 25 6059 LBN-20/25 32 376 LBG-32 40 3762 LBG-40 50 3763 LBG-50 2 537263 DPNA-2 6 537264 DPNA-6 20 537265 DPNA-20 25 537266 DPNA-25 32 537267 DPNA-32 40 537268 DPNA-40 50 537269 DPNA-50 Lead Time LT for all products on this page: D typically ships same day/next day 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 39

Compact Cylinders ADN, to ISO 2287 Ordering Data Piston Rod Attachments Technical Data www.festo.com/catalog/<type> or <order code> For Part No. Type Rod eye SGS Rod clevis SG 2 532694 SGS-0-32 6 9254 SGS-M6 20, 25 9255 SGS-M8 32, 40 926 SGS-M0x,25 50 9262 SGS-M2x,25 2 546552 SG-UNF0-32-B 6 30 SG-M6 20, 25 3 SG-M8 32, 40 30 SG-M0x,25 50 3 SG-M2x,25 Self-aligning rod coupler FK 2 532703 FK-0-32 6 206 FK-M6 20, 25 2062 FK-M8 32, 40 640 FK-M0x,25 50 64 FK-M2x,25 Ordering Data One-way Flow Control Valves for Exhaust Air Flow Control Technical Data 254 Function For [mm] 2, 6, 20, 25 32, 40, 50 Ordering Data Push-in Fittings QB Function For [mm] 2, 6, 20, 25 Tubing O.D. [mm] Part No. Type 4 97577 GRLA-M5-QS-4-RS-D 6 97578 GRLA-M5-QS-6-RS-D 4 97580 GRLA-/8-QS-4-RS-D 6 9758 GRLA-/8-QS-6-RS-D Technical Data 246 Tubing Part No. Type O.D. [mm] 4 53304 QSM-M5-4 6 53306 QSM-M5-6 32, 40, 50 4 5300 QS-/8-4 6 53002 QS-/8-6 Ordering Data Proximity Sensors and Connecting Cables Description Part No. Type Proximity sensor for T-slot, magneto-resistive N/O contact Technical data 64 PNP, cable, 2.5 m 543867 SMT-8M-PS-24V-K-2,5-OE PNP, plug 543866 SMT-8M-PS-24V-K-0,3-M8D NPN, cable, 2.5 m 543870 SMT-8M-NS-24V-K-2,5-OE NPN, plug 54387 SMT-8M-NS-24V-K-0,3-M8D Magnetic reed N/O contact Technical data 65 Cable, 2.5 m 543862 SME-8M-ZS-24V-K-2,5-OE Plug 54386 SME-8M-DS-24V-K-0,3-M8D Connecting cable, straight socket 2.5 m 54333 NEBU-M8G3-K-2.5-LE3 Lead Time LT for all products on this page: D typically ships same day/next day 40 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Mini Slides DGSL Metric Series Overview High load capacity and positioning accuracy Maximum flexibility thanks to eight sizes Guide unit with high linear and parallel precision Simple coarse adjustment and precision fine adjustment of the end positions Detailed product information www.festo.com/catalog/dgsl Product Range Overview Function Size Stroke Force Variants [mm] [N] P P Y3 A Double-acting 4, 6, 8, 0, 2, 0 200 7 483 6, 20, 25 Variants P Flexible cushioning, without metallic end position, both ends P Flexible cushioning, with metallic end position, both ends Y3 Progressive shock absorber, both ends A Position sensing Contents Technical Data 42 Ordering Data 43 Overview 46 47 Note: All metric products can be used within inch tubing systems via hybrid fittings ( Overview on page 24) 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 4

Mini slides DGSL Metric Series Technical Data Materials Housing, end caps: Anodized aluminum Guide: Tempered steel Piston rod: High-alloy steel Technical Data Download CAD data www.festo.com/us/engineering Size 4 6 8 0 2 6 20 25 Pneumatic connection M3 M5 Gx Cushioning P Flexible cushioning, without metallic end position, both ends P Flexible cushioning, with metallic end position, both ends, adjustable Y3 With progressive shock absorber, both ends Theoretical force at 6 bar, advancing [N] 7 30 47 68 2 88 295 483 Theoretical force at 6 bar, retracting [N] 3 23 40 5 04 58 247 45 Length [mm] 72 9 8 2 90 72 03 209 06 267 24 293 4 383 57 388 Width [mm] 28 35 42 49 59 65 83 03 Height [mm] 6 20 24 29 36 40 49 60 Operating Conditions Size 4 6 8 0 2 6 20 25 Operating medium Compressed air in accordance with ISO 8573-:200 [7:4:4] Note on operating/pilot medium Operation with lubricated medium possible (in which case lubricated operation will always be required) Min. operating pressure [bar] 2.5.5 Max. operating pressure [bar] 8 Ambient temperature ) [ C] 0 +60 ) Note operating range of proximity sensors. 42 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Mini slides DGSL Metric Series Ordering Data Ordering Data Flexible Cushioning, without Metallic End Position Piston Stroke Piston Stroke [mm] [mm] Part No. Type LT [mm] [mm] Part No. Type LT 4 0 54390 DGSL-4-0-PA D 20 5439 DGSL-4-20-PA D 30 54392 DGSL-4-30-PA D 6 0 54396 DGSL-6-0-PA D 20 54397 DGSL-6-20-PA D 30 54398 DGSL-6-30-PA D 40 54399 DGSL-6-40-PA D 50 543920 DGSL-6-50-PA D 8 0 543926 DGSL-8-0-PA D 20 543927 DGSL-8-20-PA D 30 543928 DGSL-8-30-PA D 40 543929 DGSL-8-40-PA D 50 543930 DGSL-8-50-PA D 80 54393 DGSL-8-80-PA D 0 0 543942 DGSL-0-0-PA D 20 543943 DGSL-0-20-PA D 30 543944 DGSL-0-30-PA D 40 543945 DGSL-0-40-PA D 50 543946 DGSL-0-50-PA D 80 543947 DGSL-0-80-PA D 00 543948 DGSL-0-00-PA D 2 0 54396 DGSL-2-0-PA D 20 543962 DGSL-2-20-PA D 30 543963 DGSL-2-30-PA D 40 543964 DGSL-2-40-PA D 50 543965 DGSL-2-50-PA D 80 543966 DGSL-2-80-PA D 00 543967 DGSL-2-00-PA D 50 543968 DGSL-2-50-PA D 6 0 543983 DGSL-6-0-PA D 20 543984 DGSL-6-20-PA D 30 543985 DGSL-6-30-PA D 40 543986 DGSL-6-40-PA D 50 543987 DGSL-6-50-PA D 80 543988 DGSL-6-80-PA D 00 543989 DGSL-6-00-PA D 50 543990 DGSL-6-50-PA D 20 0 544005 DGSL-20-0-PA D 20 544006 DGSL-20-20-PA D 30 544007 DGSL-20-30-PA D 40 544008 DGSL-20-40-PA D 50 544009 DGSL-20-50-PA D 80 54400 DGSL-20-80-PA D 00 5440 DGSL-20-00-PA D 50 54402 DGSL-20-50-PA D 200 54403 DGSL-20-200-PA D 25 0 544030 DGSL-25-0-PA D 20 54403 DGSL-25-20-PA D 30 544032 DGSL-25-30-PA D 40 544033 DGSL-25-40-PA D 50 544034 DGSL-25-50-PA D 80 544035 DGSL-25-80-PA D 00 544036 DGSL-25-00-PA D 50 544037 DGSL-25-50-PA D 200 544038 DGSL-25-200-PA D LT = Lead time D typically ships same day/next day 3D typically ships within 3 days 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 43

Mini slides DGSL Metric Series Ordering Data Ordering Data Flexible Cushioning, with Metallic End Position Piston Stroke Piston Stroke [mm] [mm] Part No. Type LT [mm] [mm] Part No. Type LT 4 0 54393 DGSL-4-0-PA 3D 20 54394 DGSL-4-20-PA 3D 30 54395 DGSL-4-30-PA 3D 6 0 54392 DGSL-6-0-PA 3D 20 543922 DGSL-6-20-PA 3D 30 543923 DGSL-6-30-PA 3D 40 543924 DGSL-6-40-PA 3D 50 543925 DGSL-6-50-PA 3D 8 0 543932 DGSL-8-0-PA 3D 20 543933 DGSL-8-20-PA 3D 30 543934 DGSL-8-30-PA 3D 40 543935 DGSL-8-40-PA 3D 50 543936 DGSL-8-50-PA 3D 80 543937 DGSL-8-80-PA 3D 0 0 543949 DGSL-0-0-PA 3D 20 543950 DGSL-0-20-PA 3D 30 54395 DGSL-0-30-PA 3D 40 543952 DGSL-0-40-PA 3D 50 543953 DGSL-0-50-PA 3D 80 543954 DGSL-0-80-PA 3D 00 543955 DGSL-0-00-PA 3D 2 0 543969 DGSL-2-0-PA 3D 20 543970 DGSL-2-20-PA 3D 30 54397 DGSL-2-30-PA 3D 40 543972 DGSL-2-40-PA 3D 50 543973 DGSL-2-50-PA 3D 80 543974 DGSL-2-80-PA 3D 00 543975 DGSL-2-00-PA 3D 50 543976 DGSL-2-50-PA 3D 6 0 54399 DGSL-6-0-PA 3D 20 543992 DGSL-6-20-PA 3D 30 543993 DGSL-6-30-PA 3D 40 543994 DGSL-6-40-PA 3D 50 543995 DGSL-6-50-PA 3D 80 543996 DGSL-6-80-PA 3D 00 543997 DGSL-6-00-PA 3D 50 543998 DGSL-6-50-PA 3D 20 0 54404 DGSL-20-0-PA 3D 20 54405 DGSL-20-20-PA 3D 30 54406 DGSL-20-30-PA 3D 40 54407 DGSL-20-40-PA 3D 50 54408 DGSL-20-50-PA 3D 80 54409 DGSL-20-80-PA 3D 00 544020 DGSL-20-00-PA 3D 50 54402 DGSL-20-50-PA 3D 200 544022 DGSL-20-200-PA 3D 25 0 544039 DGSL-25-0-PA 3D 20 544040 DGSL-25-20-PA 3D 30 54404 DGSL-25-30-PA 3D 40 544042 DGSL-25-40-PA 3D 50 544043 DGSL-25-50-PA 3D 80 544044 DGSL-25-80-PA 3D 00 544045 DGSL-25-00-PA 3D 50 544046 DGSL-25-50-PA 3D 200 544047 DGSL-25-200-PA 3D LT = Lead time D typically ships same day/next day 3D typically ships within 3 days 44 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Mini slides DGSL Metric Series Ordering Data Ordering Data Progressive Shock Absorber Piston Stroke Piston Stroke [mm] [mm] Part No. Type LT [mm] [mm] Part No. Type LT 8 30 543938 DGSL-8-30-Y3A 3D 40 543939 DGSL-8-40-Y3A 3D 50 543940 DGSL-8-50-Y3A 3D 80 54394 DGSL-8-80-Y3A 3D 0 30 543956 DGSL-0-30-Y3A 3D 40 543957 DGSL-0-40-Y3A 3D 50 543958 DGSL-0-50-Y3A 3D 80 543959 DGSL-0-80-Y3A 3D 00 543960 DGSL-0-00-Y3A 3D 2 30 543977 DGSL-2-30-Y3A 3D 40 543978 DGSL-2-40-Y3A 3D 50 543979 DGSL-2-50-Y3A 3D 80 543980 DGSL-2-80-Y3A 3D 00 54398 DGSL-2-00-Y3A 3D 50 543982 DGSL-2-50-Y3A 3D 6 30 543999 DGSL-6-30-Y3A 3D 40 544000 DGSL-6-40-Y3A 3D 50 54400 DGSL-6-50-Y3A 3D 80 544002 DGSL-6-80-Y3A 3D 00 544003 DGSL-6-00-Y3A 3D 50 544004 DGSL-6-50-Y3A 3D 20 30 544023 DGSL-20-30-Y3A 3D 40 544024 DGSL-20-40-Y3A 3D 50 544025 DGSL-20-50-Y3A 3D 80 544026 DGSL-20-80-Y3A 3D 00 544027 DGSL-20-00-Y3A 3D 50 544028 DGSL-20-50-Y3A 3D 200 544029 DGSL-20-200-Y3A 3D 25 30 544048 DGSL-25-30-Y3A 3D 40 544049 DGSL-25-40-Y3A 3D 50 544050 DGSL-25-50-Y3A 3D 80 54405 DGSL-25-80-Y3A 3D 00 544052 DGSL-25-00-Y3A 3D 50 544053 DGSL-25-50-Y3A 3D 200 544054 DGSL-25-200-Y3A 3D LT = Lead time D typically ships same day/next day 3D typically ships within 3 days 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 45

Mini Slides DGSL Metric Series Peripherals Overview 2 2 Note End stops must not be removed. 5 6 7 3 4 Page/Internet Proximity sensor SME-/SMT-0 47 2 Centering sleeve ZBH 47 3 One-way flow control valve GRLA 47 4 Push-in fitting QS 47 5 Cushioning with shock absorber Y3 47 6 Cushioning with stop P 47 7 Cushioning P 46 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Mini Slides DGSL Metric Series Ordering Data Technical Data www.festo.com/catalog/<type> or <order code> For size Part No. Type 4, 6 89652 ZBH-5 0, 2, 6 8677 ZBH-7 20, 25 50927 ZBH-9 Connector sleeve 2) 8, 0 548802 ZBV-M4-7 Shock absorber P Shock absorber Y3 ) Packaging unit quantity 0 pieces. 2) Packaging unit quantity 3 pieces. 2, 6 548803 ZBV-M5-7 20, 25 548804 ZBV-M6-9 4 548370 DYEF-M4-YF 6 54837 DYEF-M5-YF 8 548372 DYEF-M6-YF 0 548373 DYEF-M8-YF 2 548374 DYEF-M0-YF 6 548375 DYEF-M2-YF 20 548376 DYEF-M4-YF 25 548377 DYEF-M6-YF 8 548070 DYSW-4-6-YF 0 54807 DYSW-5-8-YF 2 548072 DYSW-7-0-YF 6 548073 DYSW-8-4-YF 20 548074 DYSW-0-7-YF 25 548075 DYSW-2-20-YF Ordering Data Proximity Sensors and Connecting Cables Description Part No. Type Proximity sensor for C-slot, magneto-resistive N/O contact Technical data 68 PNP, cable, 2.5 m 55373 SMT-0M-PS-24V-E-2,5-L-OE PNP, plug 55375 SMT-0M-PS-24V-E-0,3-L-M8D Magnetic reed N/O contact Technical data 69 Cable, 2.5 m 55369 SME-0M-ZS-24V-E-2,5-L-OE Plug 55367 SME-0M-DS-24V-E-0,3-L-M8D Connecting cable, straight socket 2.5 m 54333 NEBU-M8G3-K-2.5-LE3 Ordering Data One-way Flow Control Valves for Exhaust Air Flow Control Technical Data 254 Function For [mm] Tubing O.D. [mm] Part No. Type 4, 6, 8 3 7504 GRLA-M3-QS-3 ) 0, 2, 6 4 97577 GRLA-M5-QS-4-RS-D 6 97578 GRLA-M5-QS-6-RS-D 20, 25 4 97580 GRLA-/8-QS-4-RS-D 6 9758 GRLA-/8-QS-6-RS-D ) Only one GRLA-M3-QS-3 can be mounted onto the front of size 4 slides Ordering Data Push-in Fittings QB Function For [mm] Tubing O.D. [mm] Part No. Type 4, 6, 8 3 5332 QSM-M3-3-I 4 5334 QSM-M3-4-I 0, 2, 6 4 53304 QSM-M5-4 6 53306 QSM-M5-6 20, 25 4 5300 QS-/8-4 6 53002 QS-/8-6 Technical Data 246 Lead Time LT for all products on this page: D typically ships same day/next day 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 47

Guided Drives DFM Overview Sturdy and accurate With plain-bearing or recirculating ball bearing guide High resistance to torques and lateral forces Wide range of applications Spare parts service Repair service Detailed product information www.festo.com/catalog/dfm Product Range Overview Function Version Piston Stroke Force Variants [mm] [mm] [N] P A Double-acting Plain-bearing guide (GF) 2, 6, 20, 25, 32, 40, 50, 63 0 200 68,870 Variants P Flexible cushioning rings/pads at both ends A Position sensing General Technical Data Piston 2 6 20 25 32 40 50 63 Pneumatic connection M5 M5 M5 Gx Gx Gx G¼ G¼ Protection against rotation Guide rods with yoke, with plain-bearing or recirculating ball bearing guide Contents Technical Data 49 Ordering Data 50 Overview 5 52 Note: All metric products can be used within inch tubing systems via hybrid fittings ( Overview on page 24) 48 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Guided Drives DFM Technical Data Centre of gravity of effective load M Torque Materials Housing, end caps: Anodized aluminum Yoke plate: Galvanized steel Piston rod, guide rods: High-alloy steel Seals: Nitrile rubber Technical Data Piston 2 6 20 25 Cushioning Flexible cushioning rings/pads at both ends Theoretical force at 6 bar, [N] 68 2 88 295 advancing Theoretical force at 6 bar, [N] 5 90 4 247 retracting Max. effective load ) [N] 9 28 24 73 35 0 84 23 Torque load 2) [Nm] 0.38 0.65 0.55.68.0 3 2.85 4.2 Length at min. stroke [mm] 59 60 75 93 Width [mm] 60 67 83 95 Height [mm] 28 32 36 44 Piston 32 40 50 63 Cushioning Flexible cushioning rings/pads at both ends Theoretical force at 6 bar, [N] 482 754,78,870 advancing Theoretical force at 6 bar, [N] 45 686,057,750 retracting Max. effective load ) [N] 2 88 09 80 68 257 68 257 Torque load 2) [Nm] 4.25 7.3 4.80 7.90 9.30 4.5 0.50 5.90 Length at 0 mm stroke [mm] 0 06 8 8 Width [mm] 0 20 48 62 Height [mm] 49 54 64 78 ) Dependent on stroke and distance xs. 2) Dependent on stroke. Operating Conditions Piston 2 6 20 25 32 40 50 63 Operating medium Compressed air in accordance with ISO 8573-:200 [7:4:4] Note on operating/pilot medium Operation with lubricated medium possible (in which case lubricated operation will always be required) Operating pressure [bar] 2 0.5 0 0 Ambient temperature ) [ C] 20 +80 ) Note operating range of proximity sensors. 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 49

Guided Drives DFM Ordering Data Ordering Data Progressive Shock Absorber Piston Stroke Piston Stroke [mm] [mm] Part No. Type LT [mm] [mm] Part No. Type LT 2 0 70824 DFM-2-0-P-A-GF D 25 70826 DFM-2-25-P-A-GF D 50 70829 DFM-2-50-P-A-GF D 80 70830 DFM-2-80-P-A-GF D 00 7083 DFM-2-00-P-A-GF D 6 0 70832 DFM-6-0-P-A-GF D 25 70834 DFM-6-25-P-A-GF D 50 70837 DFM-6-50-P-A-GF D 80 70838 DFM-6-80-P-A-GF D 00 70839 DFM-6-00-P-A-GF D 20 25 7084 DFM-20-25-P-A-GF D 50 70844 DFM-20-50-P-A-GF D 80 70845 DFM-20-80-P-A-GF D 00 70846 DFM-20-00-P-A-GF D 25 25 70848 DFM-25-25-P-A-GF D 50 7085 DFM-25-50-P-A-GF D 80 70852 DFM-25-80-P-A-GF D 00 70853 DFM-25-00-P-A-GF D 32 25 70855 DFM-32-25-P-A-GF D 50 70858 DFM-32-50-P-A-GF D 80 70859 DFM-32-80-P-A-GF D 00 70860 DFM-32-00-P-A-GF D 25 7086 DFM-32-25-P-A-GF D 60 70862 DFM-32-60-P-A-GF D 200 70863 DFM-32-200-P-A-GF D 40 25 70864 DFM-40-25-P-A-GF D 50 70865 DFM-40-50-P-A-GF D 80 70866 DFM-40-80-P-A-GF D 00 70867 DFM-40-00-P-A-GF D 25 70868 DFM-40-25-P-A-GF D 60 70869 DFM-40-60-P-A-GF D 200 70870 DFM-40-200-P-A-GF D 50 25 7087 DFM-50-25-P-A-GF D 50 70872 DFM-50-50-P-A-GF D 80 70873 DFM-50-80-P-A-GF D 00 70874 DFM-50-00-P-A-GF D 25 70875 DFM-50-25-P-A-GF D 60 70876 DFM-50-60-P-A-GF D 200 70877 DFM-50-200-P-A-GF D 63 25 70878 DFM-63-25-P-A-GF D 50 70879 DFM-63-50-P-A-GF D 80 70880 DFM-63-80-P-A-GF D 00 7088 DFM-63-00-P-A-GF D 25 70882 DFM-63-25-P-A-GF D 60 70883 DFM-63-60-P-A-GF D 200 70884 DFM-63-200-P-A-GF D LT = Lead time D typically ships same day/next day 3D typically ships within 3 days 50 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Guided Drives DFM Peripherals Overview 4 3 2 4 Push-in fitting QS 52 2 Proximity sensor SME-/SMT-8 52 3 Slot cover ABP-5-S abp 4 One-way flow control valve GRLA 52 Centering sleeve ZBH 52 Page/Internet 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 5

Guided Drives DFM Centering Sleeves Included in Scope of Delivery For Centering sleeves ) For housing For yoke plate 2 2x ZBH-5, 2x ZBH-9 2x ZBH-5 6 2x ZBH-5, 2x ZBH-9 2x ZBH-5 20 2x ZBH-7, 2x ZBH-9 2x ZBH-9 25 2x ZBH-7, 2x ZBH-9 2x ZBH-9 32 2x ZBH-9, 2x ZBH-2 2x ZBH-9 40 2x ZBH-9, 2x ZBH-2 2x ZBH-9 50 2x ZBH-2 2x ZBH-2 63 2x ZBH-2 2x ZBH-2 ) Supplied in packs of 0 for repeat orders. Ordering Data Centering Sleeves ) Technical Data www.festo.com/catalog/<type> or <order code> For Part No. Type See table above 89652 ZBH-5 8677 ZBH-7 50927 ZBH-9 89653 ZBH-2 Ordering Data Proximity Sensors and Connecting Cables Description Part No. Type Proximity sensor for T-slot, magneto-resistive N/O contact Technical data 64 PNP, cable, 2.5 m 543867 SMT-8M-PS-24V-K-2,5-OE PNP, plug 543866 SMT-8M-PS-24V-K-0,3-M8D NPN, cable, 2.5 m 543870 SMT-8M-NS-24V-K-2,5-OE NPN, plug 54387 SMT-8M-NS-24V-K-0,3-M8D Magnetic reed N/O contact Technical data 65 Cable, 2.5 m 543862 SME-8M-ZS-24V-K-2,5-OE Plug 54386 SME-8M-DS-24V-K-0,3-M8D Connecting cable, straight socket 2.5 m 54333 NEBU-M8G3-K-2.5-LE3 ) Packaging unit quantity 0 pieces. Ordering Data One-way Flow Control Valves for Exhaust Air Flow Control Technical Data 254 Function For [mm] Tubing O.D. [mm] Part No. Type 2, 6, 20 4 97577 GRLA-M5-QS-4-RS-D 6 97578 GRLA-M5-QS-6-RS-D 25, 32, 40 4 97580 GRLA-/8-QS-4-RS-D 6 9758 GRLA-/8-QS-6-RS-D 50, 63 6 62965 GRLA-/4-QS-6-RS-B 8 62966 GRLA-/4-QS-8-RS-B Ordering Data Push-in Fittings QB Function For [mm] Tubing O.D. [mm] Part No. Type Technical Data 246 2, 6, 20 4 53304 QSM-M5-4 6 53306 QSM-M5-6 25, 32, 40 4 5300 QS-/8-4 6 53002 QS-/8-6 50,63 6 53003 QS-/4-6 8 53005 QS-/4-8 Lead Time LT for all products on this page: D typically ships same day/next day 52 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Linear Actuators DGC Inch Series Overview Compact dimensions Quick and sturdy installation and mounting High precision and load carrying ability Excellent running characteristics and low air consumption Precision interfaces Passive guide unit for increased force and torque capacity and reduced vibrations with dynamic loads Spare parts service Repair service Detailed product information www.festo.com/catalog/dgc Product Range Overview Version Piston Stroke Force Variants [mm] [in] (approximated) [in] [lbf] P PPV YSR YSRW A Page/Internet Linear actuators DGC, double-acting Basic design G 8, 25, 32, 40, 50, 63 /6,, /4, 5/8, 2, 2 /2 Plain-bearing guide GF 8, 25, 32, 40, 50, 63 /6,, /4, 5/8, 2, 2 /2 Recirculating ball bearing guide KF 8, 25, 32, 40, 50, 63 /6,, /4, 5/8, 2, 2 /2 Without drive Passive guide axis FA 8, 25, 32, 40, 50, 63 /6,, /4, 5/8, 2, 2 /2 0.04 8 34 420 0.04 8 34 420 0.04 8 34 420 0.04 8 54 57 60 63 Variants N NPT thread YSR Self-adjusting shock absorber A Position sensing KL Additional slide on left P Flexible cushioning rings/ pads at both ends YSRW Self-adjusting progressive shock absorber GP Protected recirculating ball bearing guide KR Additional slide on right PPV Pneumatic cushioning, adjustable at both ends Contents DGC-G DGC-GF DGC-KF DGC-FA Technical Data 54 Technical Data 57 Technical Data 60 Technical Data 63 Ordering Data 55 Ordering Data 58 Ordering Data 6 Ordering Data 64 Overview 56 Overview 59 Overview 62 Overview 65 66 66 66 66 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 53

Linear Actuators DGC-G, Basic Design Inch Series Technical Data Technical Data Materials Guide rail, slide, end caps, cylinder barrel: Anodized aluminum Piston seal, sealing tape/cover strip: Polyurethane Slide elements: Polyacetal Size 8 25 32 40 50 63 Piston [mm] 8 25 32 40 50 63 [in] ) /6 /4 5/8 2 2 /2 Pneumatic connection M5, suitable for xnpt ¼NPT ynpt 0-32 UNF Stroke [in] 0.04 8 Cushioning PPV Pneumatic cushioning, adjustable at both ends YSR Cushioning length 2) [in] 0.65 0.6 0.69.6.7.22 Theoretical force at 6 bar [lbf] 34.4 66.3 09 70 265 420 Max. permissible force F y [lbf] 5.7 40.5 56.2 83.2 07.9 46. Max. permissible force F z [lbf] 76.4 2.4 80 247 360 450 Max. permissible torque M x [ft-lbf].4 2.9 6.6 8.8 4.8 9.2 Max. permissible torque M y [ft-lbf] 8.8 4.8 29.5 44.2 0.6 0.6 Max. permissible torque M z [ft-lbf] 2.9 3.7 8.8 8.4 27.3 35.4 ) Approximated values; for reference only. 2) With PPV cushioning. Operating Conditions Size 8 25 32 40 50 63 Operating medium Compressed air in accordance with ISO 8573-:200 [7: : ] Note on operating/pilot medium Operation with lubricated medium possible (in which case lubricated operation will always be required) Operating pressure [psi] 29 8 22 8 Ambient temperature 3) [ F] 4 40 3) Note operating range of proximity sensors. 54 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Linear Actuators DGC-G, Basic Design Inch Series Ordering data Modular products Ordering Table Size 8 25 32 40 50 63 Conditions 0M Module No. 532 446 532 447 532 448 532 449 532 450 532 45 Code Enter code Function Linear drive DGC DGC Thread NPT thread -N -N Piston [mm] 8 25 32 40 50 63 - Stroke [mm] 3,000 - Guide Basic design -G -G Cushioning Adjustable at both ends Pneumatic cushioning -PPV Position sensing Via proximity sensor -A -A 0O Enclosed separately (can be retrofitted) ZUB- ZUB- Foot mounting F Profile mounting 9 M Moment compensator Moment compensator FK Slot nut for mounting slot 9 B Proximity sensor Cable 8 ft 9 G Plug M8 9 H Proximity sensor, contactless, PNP Plug socket with cable Cable 8 ft 9 I Plug M8 9 J M8, 8 ft 9 V Slot cover for sensor slot 9 L Manual Express waiver no operating instructions to be included (already available) -O Transfer order code DGC N G A ZUB Lead Time LT for all products on this page: 3D typically ships within 3 days 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 55

Linear Actuators DGC-G, Basic Design Inch Series Overview Note End stops or shock absorbers must not be removed. ab 4 5 6 7 8 9 aj Page/Internet 4 One-way flow control valve GRLA 66 5 Proximity sensor SME/SMT 66 6 Connecting cable NEBU 66 7 Slot cover ABP-S abp Page/Internet 8 Profile mounting MUC 67 9 Slot nut HMBN 67 aj Foot mounting HPC 67 ab Moment compensator FKC 67 56 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Linear Actuators DGC-GF, with Plain-bearing Guide Inch Series Technical Data Technical Data Materials Guide rail, slide, end caps, cylinder barrel: Anodized aluminum Piston seal, sealing band/cover strip: Polyurethane Slide elements: Polyacetal Size 8 25 32 40 50 63 Piston [mm] 8 25 32 40 50 63 [in] ) /6 /4 5/8 2 2 /2 Pneumatic connection M5, suitable for xnpt ¼NPT ynpt 0-32 UNF Stroke [in] 0.04 8 Cushioning PPV Pneumatic cushioning, adjustable at both ends YSR Self-adjusting shock absorbers at both ends Cushioning length 2) [in] 0.65 0.6 0.69.6.7.22 Theoretical force at 6 bar [lbf] 34.4 66.3 09 70 265 420 Max. permissible force F y [lbf] 99 44 202 30 337 57 Max. permissible force F z [lbf] 2 292 405 450 645 003 Max. permissible torque M x [ft-lbf] 2.5 6.3. 20.7 39.8 70.8 Max. permissible torque M y [ft-lbf] 4.8 29.5 5.6 8. 99 332 Max. permissible torque M z [ft-lbf] 6.3 4.8 24.3 39.8 76 38 ) Approximated values; for reference only. 2) With PPV cushioning. Operating Conditions Size 8 25 32 40 50 63 Operating medium Compressed air in accordance with ISO 8573-:200 [7: : ] Note on operating/pilot medium Operation with lubricated medium possible (in which case lubricated operation will always be required) Operating pressure [psi] 29 8 22 8 Ambient temperature 3) [ F] 4 40 3) Note operating range of proximity sensors. 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 57

Linear Actuators DGC-GF, with Plain-bearing Guide Inch Series Ordering data Modular products Ordering Table Size 8 25 32 40 50 63 Conditions 0M Module No. 532 446 532 447 532 448 532 449 532 450 532 45 Code Enter code Function Linear drive DGC DGC Thread NPT thread -N -N Piston [mm] 8 25 32 40 50 63 - Stroke [mm] 3,000 - Guide Plain-bearing guide -GF -GF Cushioning Pneumatic cushioning, adjustable at both ends -PPV Shock absorber, self-adjusting -YSR Shock absorber, self-adjusting, progressive -YSRW Position sensing Via proximity sensor -A -A 0O Enclosed separately (can be retrofitted) ZUB- ZUB- Foot mounting F Profile mounting 9 M Slot nut for mounting slot 9 B Proximity sensor Cable 8 ft 9 G Plug M8 9 H Proximity sensor, contactless, PNP Cable 8 ft 9 I Plug M8 9 J Plug socket with cable M8, 8 ft 9 V Slot cover for sensor slot 9 L Mechanical end-position limiter Variable end position, at one end YWZ Variable end position, at both ends YWZ2 Manual Express waiver no operating instructions to be included (already available) -O YWZ, YWZ2Only with cushioning YSR or YSRW Transfer order code DGC N GF A ZUB Lead Time LT for all products on this page: 3D typically ships within 3 days 58 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Linear Actuators DGC-GF, with Plain-bearing Guide Inch Series Overview Note End stops or shock absorbers must not be removed. 2 3 4 5 6 7 8 9 aj Page/Internet Centering pin/sleeve ZBS/ZBH ) 66 2 Shock absorber YSR 66 3 Shock absorber YSRW-DGC 66 4 One-way flow control valve GRLA 66 5 Proximity sensor SME-/SMT-8 66 Page/Internet 6 Connecting cable NEBU 66 7 Slot cover ABP-S abp 8 Profile mounting MUC 67 9 Slot nut HMBN 67 aj Foot mounting HPC 67 ) Included in the scope of delivery of the axis. 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 59

Linear Actuators DGC-KF, with Recirculating Ball Bearing Guide Inch Series Technical Data Technical Data Materials Guide rail, slide: High-alloy steel End caps, cylinder barrel: Anodized aluminum Piston seal, sealing band/cover strip: Polyurethane Slide elements: Polyacetal Size 8 25 32 40 50 63 Piston [mm] 8 25 32 40 50 63 [in] ) /6 /4 5/8 2 2 /2 Pneumatic connection M5, suitable for xnpt ¼NPT ynpt 0-32 UNF Stroke [in] 0.04 8 Cushioning PPV Pneumatic cushioning, adjustable at both ends YSR Self-adjusting shock absorbers at both ends Cushioning length 2) [in] 0.65 0.6 0.69.6.7.22 Theoretical force at 6 bar [lbf] 34.4 66.3 09 70 265 420 Max. permissible force F y [lbf] 46 686 744 549 549 347 Max. permissible force F z [lbf] 46 686 744 549 549 347 Max. permissible torque M x [ft-lbf].8 26.5 39.8 06 06 390 Max. permissible torque M y [ft-lbf] 37.6 7.5 0.6 280 468 853 Max. permissible torque M z [ft-lbf] 37.6 7.5 0.6 280 468 853 ) Approximated values; for reference only. 2) With PPV cushioning. Operating Conditions Size 8 25 32 40 50 63 Operating medium Compressed air in accordance with ISO 8573-:200 [7: : ] Note on operating/pilot medium Operation with lubricated medium possible (in which case lubricated operation will always be required) Operating pressure [psi] 29 8 22 8 Ambient temperature 3) [ F] 4 40 3) Note operating range of proximity sensors. 60 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Linear Actuators DGC-KF, with Recirculating Ball Bearing Guide Inch Series Ordering data Modular products Ordering Table Size 8 25 32 40 50 63 Conditions 0M Module No. 532 446 532 447 532 448 532 449 532 450 532 45 Code Enter code Function Linear drive DGC DGC Thread NPT thread -N -N Piston [mm] 8 25 32 40 50 63 - Stroke [mm] 3,000 - Guide Recirculating ball bearing guide -KF -KF Cushioning Pneumatic cushioning, adjustable at both ends -PPV Shock absorber, self-adjusting -YSR Shock absorber, self-adjusting, progressive -YSRW Position sensing Via proximity sensor -A -A 0O Slide Protected recirculating ball bearing guide -GP Additional slide at left Additional slide, standard, at left 2 -KL Additional slide at right Additional slide, standard, at right 2 -KR Enclosed separately (can be retrofitted) ZUB- ZUB- Foot mounting F Profile mounting 9 M Slot nut for mounting slot 9 B Proximity sensor Cable 8 ft 9 G Plug M8 9 H Proximity sensor, contactless, PNP Cable 8 ft 9 I Plug M8 9 J Plug socket with cable M8, 8 ft 9 V Slot cover for sensor slot 9 L Mechanical end-position limiter Variable end position, at one end 3 YWZ Variable end position, at both ends 3 YWZ2 Intermediate position module intermediate position 4 -Z 2 intermediate positions 4 -Z2 3 intermediate positions 4 -Z3 Manual Express waiver no operating instructions to be included (already available) -O GP Not with cushioning YSR and YSRW Not with additional slide at left KL or additional slide at right KR 2 KL, KR With a linear drive DGC with additional slide, the effective stroke is reduced by the length of the additional slide and the distance between both slides Not with cushioning PPV 3 YWZ, YWZ2 Only with cushioning YSR or YSRW 4 Z, Z2, Z3 Only with cushioning YSR or YSRW and mechanical end-position limiter YWZ or YWZ2 Transfer order code DGC N KF A ZUB Lead Time LT for all products on this page: 3D typically ships within 3 days 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 6

Linear Actuators DGC-KF, with Recirculating Ball Bearing Guide Inch Series Overview Note End stops or shock absorbers must not be removed. 2 3 4 5 6 7 8 9 aj aa Page/Internet Centering pin/sleeve ZBS/ZBH ) 66 2 Shock absorber YSR 66 3 Shock absorber YSRW-DGC 66 4 One-way flow control valve GRLA 66 5 Proximity sensor SME-/SMT-8 66 6 Connecting cable NEBU 66 7 Slot cover ABP-S abp 8 Profile mounting MUC 67 9 Slot nut HMBN 67 aj Foot mounting HPC 67 aa Centering pin/sleeve ZBS/ZBH ) 66 ) Included in the scope of delivery of the axis. 62 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Passive Guide Axes DGC-FA, without Drive Inch Series Technical Data Technical Data Materials Guide rail, slide: High-alloy steel End caps, cylinder barrel: Anodized aluminum Piston seal, sealing band/cover strip: Polyurethane Slide elements: Polyacetal Size 8 25 32 40 50 63 Piston [mm] 8 25 32 40 50 63 [in] ) /6 /4 5/8 2 2 /2 Stroke [in] 0.04 8 Guide External recirculating ball bearing guide Cushioning YSR Self-adjusting shock absorbers at both ends Max. permissible force F y [lbf] 46 686 744 549 549 347 Max. permissible force F z [lbf] 46 686 744 549 549 347 Max. permissible torque M x [ft-lbf].8 26.6 39.8 06.2 06.2 390 Max. permissible torque M y [ft-lbf] 37.6 7.5 0.6 280.3 467.6 853.3 Max. permissible torque M z [ft-lbf] 37.6 7.5 0.6 280.3 467.6 853.3 Ambient temperature 2) [ F] 4 40 ) Approximated values; for reference only. 2) Note operating range of proximity sensors. 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 63

Passive Guide Axes DGC-FA, without Drive Inch Series Ordering data Modular products Ordering Table Size 8 25 32 40 50 63 Conditions 0M Module No. 532 446 532 447 532 448 532 449 532 450 532 45 Function Driveless linear unit DGC DGC Piston [mm] 8 25 32 40 50 63 - Stroke [mm] 3000 - Guide Passive guide axis without drive -FA -FA Cushioning Flexible cushioning rings/pads at both ends -P Shock absorber, self-adjusting -YSR Shock absorber, self-adjusting, progressive -YSRW 0O Slide Protected recirculating ball bearing guide 2 -GP Additional slide 2 3 - K Supplied loose (can be retrofitted) ZUB- ZUB- Foot mounting F Profile mounting 9 M Slot nut for mounting slot 9 B Slot cover for sensor slot 9 L Mechanical end position limiter Variable end position, at one end 4 YWZ Variable end position, at both ends 4 YWZ2 User manual Express waiver no operating instructions to be included (already available) -O Code Enter code Stroke Size 25, 32, 40: Strokes up to 8,500 mm on request 2 GP Not with cushioning YSR and YSRW Not with additional slide K 3 K For a guide axis DGC with additional slide, the effective stroke is reduced by the length of the additional slide and the distance between both slides. Not with cushioning P 4 YWZ, YWZ2 Only with cushioning YSR or YSRW Transfer order code DGC FA ZUB Lead Time LT for all products on this page: 3D typically ships within 3 days 64 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Passive Guide Axes DGC-FA, without Drive Inch Series Overview Note End stops or shock absorbers must not be removed. 2 3 4 5 6 7 8 Page/Internet Centering pin/sleeve ZBS/ZBH ) 66 2 Shock absorber YSR 66 3 Shock absorber YSRW-DGC 66 4 Slot cover ABP-S abp Page/Internet 5 Profile mounting MUC 67 6 Slot nut HMBN 67 7 Foot mounting HPC 67 8 Centering pin/sleeve ZBS/ZBH ) 66 ) Included in the scope of delivery of the axis. 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 65

Linear Actuators DGC Inch Series Ordering Data Ordering Data For Size Part No. Type Ordering Data Proximity Sensors and Connecting Cables Description Part No. Type For slide 8 50928 ZBS-5 For end cap 8 50928 ZBS-5 Centering sleeve ) 3 Shock absorber ) Packaging unit 0 pieces. For slide 25, 32, 40, 50, 63 50927 ZBH-9 For end cap 25, 32, 40, 50, 63 50927 ZBH-9 For DGC-FA 8 540347 YSRW-DGC-8-KF 25 540349 YSRW-DGC-25-KF 32 54035 YSRW-DGC-32-KF For DGC-GF 8 540346 YSRW-DGC-8-GF 25 540348 YSRW-DGC-25-GF 32 540350 YSRW-DGC-32-GF 40 540352 YSRW-DGC-40-GF 50 232870 YSRW-DGC-40/50-B 63 543069 YSRW-DGC-63 For DGC-KF 8 540347 YSRW-DGC-8-KF 25 540349 YSRW-DGC-25-KF 32 54035 YSRW-DGC-32-KF 40, 50 232870 YSRW-DGC-40/50-B 63 543069 YSRW-DGC-63 5 Proximity sensor for C-slot, magneto-resistive N/O contact Technical data 68 PNP, cable, 8 ft 55373 SMT-0M-PS-24V-E-2,5-L-OE PNP, plug 55375 SMT-0M-PS-24V-E-0,3-L-M8D Magnetic reed N/O contact Technical data 69 Cable, 8 ft 55369 SME-0M-ZS-24V-E-2,5-L-OE Plug 55367 SME-0M-DS-24V-E-0,3-L-M8D 5 Proximity sensor for T-slot for piston 8 63, magneto-resistive N/O contact Technical data 64 PNP, cable, 8 ft 543867 SMT-8M-PS-24V-K-2,5-OE PNP, plug 543866 SMT-8M-PS-24V-K-0,3-M8D NPN, cable, 8 ft 543870 SMT-8M-NS-24V-K-2,5-OE NPN, plug 54387 SMT-8M-NS-24V-K-0,3-M8D Magnetic reed N/O contact Technical data 65 Cable, 8 ft 543862 SME-8M-ZS-24V-K-2,5-OE Plug 54386 SME-8M-DS-24V-K-0,3-M8D Connecting cable, straight socket 8 ft 54333 NEBU-M8G3-K-2.5-LE3 Ordering Data One-way Flow Control Valves for Exhaust Air Flow Control Technical Data 254 Function For Size Tubing O.D. [in] Part No. Type 4 One-way flow control valve with slotted head screw, metal 2) 8, 2 Â 564840 GRLA-0-32-UNF-QB-5/32-U 8 ¼ 564842 GRLA-0-32-UNF-QB-/4-U 25, 32 ¼ 534658 GRLA-/8-QB-/4-U 40, 50 Ä 534662 GRLA-/4-QB-5/6-U 63 Ä 534665 GRLA-3/8-QB-5/6-U 2) The recommended flow control valves are based on a tubing length to the valve of m. For deviations of ±50%, flow control valves with a bigger or smaller flow rate must be selected to guarantee the optimum flow control function and cylinder speed. Lead Time LT for all products on this page: D typically ships same day/next day 66 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Linear drives DGC Inch Series Ordering Data Ordering Data For Size Part No. Type 8 Profile mounting 8 53752 MUC-8 25 53753 MUC-25 32 53754 MUC-32 40 53755 MUC-40 50 53756 MUC-50 63 53757 MUC-63 9 Slot nut 2) 25, 32, 40 547264 HMBN-5-M5 aj Foot mounting 50, 63 86566 HMBN-5-2M5 8 533667 HPC-8 25 533668 HPC-25 32 533669 HPC-32 40 533670 HPC-40 50 545236 HPC-50 63 545237 HPC-63 Ordering Data For Size Part No. Type ab Moment compensator 8 53874 FKC-8 25 53875 FKC-25 32 53896 FKC-32-G 40 538962 FKC-40-G 50 545240 FKC-50/63 63 545240 FKC-50/63 ) Packaging unit 2x 0.5 m. 2) Packaging unit 0 pieces. Lead Time LT for all products on this page: D typically ships same day/next day 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 67

Linear Actuators DGC Metric Series Overview Compact dimensions Quick and sturdy installation and mounting High precision and load carrying ability Excellent running characteristics and low air consumption Precision interfaces Passive guide unit for increased force and torque capacity and reduced vibrations with dynamic loads Spare parts service Repair service Detailed product information www.festo.com/catalog/dgc Product Range Overview Version Piston [mm] Stroke [mm] Force [N] Variants P PPV YSR YSRW A Page/Internet Linear actuators DGC, double-acting Basic design G 8, 25, 32, 40, 50, 63 3,000 53,870 Plain-bearing guide GF 8, 25, 32, 40, 50, 63 3,000 53,870 Recirculating ball bearing guide KF 8, 25, 32, 40, 50, 63 3,000 53,870 Without drive Passive guide axis FA 8, 25, 32, 40, 50, 63 3,000 69 72 75 78 Variants N NPT thread YSR Self-adjusting shock absorber A Position sensing KL Additional slide on left PPV Pneumatic cushioning, adjustable at both ends YSRW Self-adjusting progressive shock absorber GP Protected recirculating ball bearing guide KR Additional slide on right Contents DGC-G DGC-GF DGC-KF DGC-FA Technical Data 69 Technical Data 72 Technical Data 75 Technical Data 78 Ordering Data 70 Ordering Data 73 Ordering Data 76 Ordering Data 79 Overview 7 Overview 74 Overview 77 Overview 80 8 8 8 8 68 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Linear Actuators DGC-G, Basic Design Metric Series Technical Data Technical Data Materials Guide rail, slide, end caps, cylinder barrel: Anodized aluminum Piston seal, sealing tape/cover strip: Polyurethane Slide elements: Polyacetal Piston 8 25 32 40 50 63 Pneumatic connection M5 Gx G¼ Gy Stroke [mm] 3,000 Cushioning PPV Pneumatic cushioning, adjustable at both ends YSR Cushioning length ) [mm] 6.5 5.5 7.5 29.5 29.8 3. Theoretical force at 6 bar [N] 53 295 483 754,78,870 Max. permissible force F y [N] 70 80 250 370 480 650 Max. permissible force F z [N] 340 540 800,00,600 2,000 Max. permissible torque M x [Nm].9 4 9 2 20 26 Max. permissible torque M y [Nm] 2 20 40 60 50 50 Max. permissible torque M z [Nm] 4 5 2 25 37 48 ) With PPV cushioning. Operating Conditions Piston 8 25 32 40 50 63 Operating medium Compressed air in accordance with ISO 8573-:200 [7: : ] Note on operating/pilot medium Operation with lubricated medium possible (in which case lubricated operation will always be required) Operating pressure [bar] 2 8.5 8 Ambient temperature 2) [ C] 0 +60 2) Note operating range of proximity sensors. 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 69

Linear Actuators DGC-G, Basic Design Metric Series Ordering data Modular products Ordering Table Size 8 25 32 40 50 63 Conditions 0M Module No. 532 446 532 447 532 448 532 449 532 450 532 45 Code Enter code Function Linear drive DGC DGC Piston [mm] 8 25 32 40 50 63 - Stroke [mm] 3,000 - Guide Basic design -G -G Cushioning Adjustable at both ends Pneumatic cushioning -PPV Position sensing For proximity sensor -A -A 0O Supplied loose (can be retrofitted) ZUB- ZUB- Foot mounting F Profile mounting 9 M Driver Moment compensator FK Slot nut for mounting slot 9 B Proximity sensor Cable, 2.5 m 9 G M8 plug 9 H Proximity sensor, contactless, PNP Cable, 2.5 m 9 I M8 plug 9 J Cable with socket M8, 2.5 m 9 V Slot cover for sensor slot 9 L User manual Express waiver no operating instructions to be included (already available) -O Transfer order code DGC G A ZUB Lead Time LT for all products on this page: 3D typically ships within 3 days 70 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Linear Actuators DGC-G, Basic Design Metric Series Overview DGC-8 63 ab 4 5 6 7 8 9 aj 4 One-way flow control valve GRLA 8 5 Proximity sensor SME/SMT 8 6 Connecting cable NEBU 8 7 Slot cover ABP-S 8 Page/Internet 8 Profile mounting MUC 82 9 Slot nut HMBN 82 aj Foot mounting HPC 82 ab Moment compensator FKC 82 Page/Internet 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 7

Linear Actuators DGC-GF, with Plain-bearing Guide Metric Series Technical Data Technical Data Materials Guide rail, slide, end caps, cylinder barrel: Anodized aluminum Piston seal, sealing band/cover strip: Polyurethane Slide elements: Polyacetal Piston 8 25 32 40 50 63 Pneumatic connection M5 Gx G¼ Gy Stroke [mm] 3,000 Cushioning PPV Pneumatic cushioning, adjustable at both ends YSR Self-adjusting shock absorbers at both ends Cushioning length ) [mm] 6.5 5.5 7.5 29.5 29.8 3. Theoretical force at 6 bar [N] 53 295 483 754,78,870 Max. permissible force F y [N] 440 640 900,380,500 2,300 Max. permissible force F z [N] 540,300,800 2,000 2,870 4,460 Max. permissible torque M x [Nm] 3.4 8.5 5 28 54 96 Max. permissible torque M y [Nm] 20 40 70 0 270 450 Max. permissible torque M z [Nm] 8.5 20 33 54 03 87 ) With PPV cushioning. Operating Conditions Piston 8 25 32 40 50 63 Operating medium Compressed air in accordance with ISO 8573-:200 [7: : ] Note on operating/pilot medium Operation with lubricated medium possible (in which case lubricated operation will always be required) Operating pressure [bar] 2 8.5 8 Ambient temperature 2) [ C] 0 +60 2) Note operating range of proximity sensors. 72 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Linear Actuators DGC-GF, with Plain-bearing Guide Metric Series Ordering data Modular products Ordering Table Size 8 25 32 40 50 63 Conditions 0M Module No. 532 446 532 447 532 448 532 449 532 450 532 45 Code Enter code Function Linear drive DGC DGC Piston [mm] 8 25 32 40 50 63 - Stroke [mm] 3,000 - Guide Plain-bearing guide -GF -GF Cushioning Pneumatic cushioning, adjustable at both ends -PPV Shock absorber, self-adjusting -YSR Shock absorber, self-adjusting, progressive -YSRW Position sensing For proximity sensor -A -A 0O Supplied loose (can be retrofitted) ZUB- ZUB- Foot mounting F Profile mounting 9 M Slot nut for mounting slot 9 B Proximity sensor Cable, 2.5 m 9 G M8 plug 9 H Proximity sensor, contactless, PNP Cable, 2.5 m 9 I M8 plug 9 J Cable with socket M8, 2.5 m 9 V Slot cover for sensor slot 9 L Mechanical end position limiter Variable end position, at one end YWZ Variable end position, at both ends YWZ2 User manual Express waiver no operating instructions to be included (already available) -O YWZ, YWZ2 Only with cushioning YSR or YSRW Transfer order code DGC GF A ZUB Lead Time LT for all products on this page: 3D typically ships within 3 days 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 73

Linear Actuators DGC-GF, with Plain-bearing Guide Metric Series Overview Note End stops or shock absorbers must not be removed. 2 3 4 5 6 7 8 9 aj Page/Internet Centering pin/sleeve ZBS/ZBH ) 8 2 Shock absorber YSR 8 3 Shock absorber YSRW-DGC 8 4 One-way flow control valve GRLA 8 5 Proximity sensor SME-/SMT-8 8 Page/Internet 6 Connecting cable NEBU 8 7 Slot cover ABP-S 8 8 Profile mounting MUC 82 9 Slot nut HMBN 82 aj Foot mounting HPC 82 ) Included in the scope of delivery of the axis. 74 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Linear Actuators DGC-KF, with Recirculating Ball Bearing Guide Metric Series Technical Data Technical Data Materials Guide rail, slide: High-alloy steel End caps, cylinder barrel: Anodized aluminum Piston seal, sealing band/cover strip: Polyurethane Slide elements: Polyacetal Piston 8 25 32 40 50 63 Pneumatic connection M5 Gx G¼ Gy Stroke [mm] 3,000 Cushioning PPV Pneumatic cushioning, adjustable at both ends YSR Self-adjusting shock absorbers at both ends Cushioning length ) [mm] 6.5 5.5 7.5 29.5 29.8 3. Theoretical force at 6 bar [N] 53 295 483 754,78,870 Max. permissible force F y [N],850 3,050 3,30 6,890 6,890 5,200 Max. permissible force F z [N],850 3,050 3,30 6,890 6,890 5,200 Max. permissible torque M x [Nm] 6 36 54 44 44 529 Max. permissible torque M y [Nm] 5 97 50 380 634,57 Max. permissible torque M z [Nm] 5 97 50 380 634,57 ) With PPV cushioning. Operating Conditions Piston 8 25 32 40 50 63 Operating medium Compressed air in accordance with ISO 8573-:200 [7: : ] Note on operating/pilot medium Operation with lubricated medium possible (in which case lubricated operation will always be required) Operating pressure [bar] 2 8.5 8 Ambient temperature 2) [ C] 0 +60 2) Note operating range of proximity sensors. 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 75

Linear Actuators DGC-KF, with Recirculating Ball Bearing Guide Metric Series Ordering data Modular products Ordering Table Size 8 25 32 40 50 63 Conditions 0M Module No. 532 446 532 447 532 448 532 449 532 450 532 45 Code Enter code Function Linear drive DGC DGC Piston [mm] 8 25 32 40 50 63 - Stroke [mm] 3,000 - Guide Recirculating ball bearing guide -KF -KF Cushioning Pneumatic cushioning, adjustable at both ends -PPV Shock absorber, self-adjusting -YSR Shock absorber, self-adjusting, progressive -YSRW Position sensing For proximity sensor -A -A 0O Slide Protected recirculating ball bearing guide -GP Additional slide at left Additional slide, standard, left 2 -KL Additional slide at right Additional slide, standard, right 2 -KR Supplied loose (can be retrofitted) ZUB- ZUB- Foot mounting F Profile mounting 9 M Slot nut for mounting slot 9 B Proximity sensor Cable, 2.5 m 9 G M8 plug 9 H Proximity sensor, contactless, PNP Cable, 2.5 m 9 I M8 plug 9 J Cable with socket M8, 2.5 m 9 V Slot cover for sensor slot 9 L Mechanical end position limiter Variable end position, at one end 3 YWZ Variable end position, at both ends 3 YWZ2 Intermediate position intermediate position 4 -Z 2 intermediate positions 4 -Z2 3 intermediate positions 4 -Z3 User manual Express waiver no operating instructions to be included (already available) -O GP Not with cushioning YSR and YSRW Not with additional slide left (-KL) or additional slide right (-KR) 2 KL, KR For a linear drive DGC with additional slide, the effective stroke is reduced by the length of the additional slide and the distance between both slides. Not with cushioning PPV 3 YWZ, YWZ2 Only with cushioning YSR or YSRW 4 Z, Z2, Z3 Only with cushioning YSR or YSRW and mechanical end position limiter YWZ or YWZ2 Transfer order code DGC KF A ZUB Lead Time LT for all products on this page: 3D typically ships within 3 days 76 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Linear Actuators DGC-KF, with Recirculating Ball Bearing Guide Metric Series Overview Note End stops or shock absorbers must not be removed. 2 3 4 5 6 7 8 9 aj aa Page/Internet Centering pin/sleeve ZBS/ZBH ) 8 2 Shock absorber YSR 8 3 Shock absorber YSRW-DGC 8 4 One-way flow control valve GRLA 8 5 Proximity sensor SME-/SMT-8 8 6 Connecting cable NEBU 8 7 Slot cover ABP-S 8 8 Profile mounting MUC 82 9 Slot nut HMBN 82 aj Foot mounting HPC 82 aa Centering pin/sleeve ZBS/ZBH ) 8 ) Included in the scope of delivery of the axis. 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 77

Passive Guide Axes DGC-FA, without Drive Metric Series Technical Data Technical Data Materials Guide rail, slide: High-alloy steel End caps, cylinder barrel: Anodized aluminum Piston seal, sealing band/cover strip: Polyurethane Slide elements: Polyacetal Piston 8 25 32 40 50 63 Stroke [mm] 3,000 Guide External recirculating ball bearing guide Cushioning YSR Self-adjusting shock absorbers at both ends Max. permissible force F y [N],850 3,050 3,30 6,890 6,890 5,200 Max. permissible force F z [N],850 3,050 3,30 6,890 6,890 5,200 Max. permissible torque M x [Nm] 6 36 54 44 44 529 Max. permissible torque M y [Nm] 5 97 50 380 634,57 Max. permissible torque M z [Nm] 5 97 50 380 634,57 Ambient temperature ) [ C] 0 +60 ) Note operating range of proximity sensors. 78 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Passive Guide Axes DGC-FA, without Drive Metric Series Ordering data Modular products Ordering Table Size 8 25 32 40 50 63 Conditions 0M Module No. 532 446 532 447 532 448 532 449 532 450 532 45 Function Driveless linear unit DGC DGC Piston [mm] 8 25 32 40 50 63 - Stroke [mm] 3,000 - Guide Passive guide axis without drive -FA -FA Cushioning Flexible cushioning rings/pads at both ends -P Shock absorber, self-adjusting -YSR Shock absorber, self-adjusting, progressive -YSRW 0O Slide Protected recirculating ball bearing guide 2 -GP Additional slide 2 3 - K Supplied loose (can be retrofitted) ZUB- ZUB- Foot mounting F Profile mounting 9 M Slot nut for mounting slot 9 B Slot cover for sensor slot 9 L Mechanical end position limiter Variable end position, at one end 4 YWZ Variable end position, at both ends 4 YWZ2 User manual Express waiver no operating instructions to be included (already available) -O Code Enter code Stroke Size 25, 32, 40: Strokes up to 8,500 mm on request 2 GP Not with cushioning YSR and YSRW Not with additional slide K 3 K For a guide axis DGC with additional slide, the effective stroke is reduced by the length of the additional slide and the distance between both slides. Not with cushioning P 4 YWZ, YWZ2 Only with cushioning YSR or YSRW Transfer order code DGC FA ZUB Lead Time LT for all products on this page: 3D typically ships within 3 days 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 79

Passive Guide Axes DGC-FA, without Drive Metric Series Overview Note End stops or shock absorbers must not be removed. 2 3 4 5 6 7 8 Page/Internet Centering pin/sleeve ZBS/ZBH ) 8 2 Shock absorber YSR 8 3 Shock absorber YSRW-DGC 8 4 Slot cover ABP-S 8 Page/Internet 5 Profile mounting MUC 82 6 Slot nut HMBN 82 7 Foot mounting HPC 82 8 Centering pin/sleeve ZBS/ZBH ) 8 ) Included in the scope of delivery of the axis. 80 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Linear Actuators DGC Metric Series Ordering Data Ordering Data For Size Part No. Type Ordering Data Proximity Sensors and Connecting Cables Description Part No. Type For slide 8 50928 ZBS-5 For end cap 8 50928 ZBS-5 Centering sleeve ) 3 Shock absorber ) Packaging unit 0 pieces. For slide 25, 32, 40, 50, 63 50927 ZBH-9 For end cap 25, 32, 40, 50, 63 50927 ZBH-9 For DGC-FA 8 540347 YSRW-DGC-8-KF 25 540349 YSRW-DGC-25-KF 32 54035 YSRW-DGC-32-KF For DGC-GF 8 540346 YSRW-DGC-8-GF 25 540348 YSRW-DGC-25-GF 32 540350 YSRW-DGC-32-GF 40 540352 YSRW-DGC-40-GF 50 232870 YSRW-DGC-40/50-B 63 543069 YSRW-DGC-63 For DGC-KF 8 540347 YSRW-DGC-8-KF 25 540349 YSRW-DGC-25-KF 32 54035 YSRW-DGC-32-KF 40, 50 232870 YSRW-DGC-40/50-B 63 543069 YSRW-DGC-63 5 Proximity sensor for C-slot, magneto-resistive N/O contact Technical data 68 PNP, cable, 2.5 m 55373 SMT-0M-PS-24V-E-2,5-L-OE PNP, plug 55375 SMT-0M-PS-24V-E-0,3-L-M8D Magnetic reed N/O contact Technical data 69 Cable, 2.5 m 55369 SME-0M-ZS-24V-E-2,5-L-OE Plug 55367 SME-0M-DS-24V-E-0,3-L-M8D 5 Proximity sensor for T-slot for piston 8 63, magneto-resistive N/O contact Technical data 64 PNP, cable, 8 ft 543867 SMT-8M-PS-24V-K-2,5-OE PNP, plug 543866 SMT-8M-PS-24V-K-0,3-M8D NPN, cable, 8 ft 543870 SMT-8M-NS-24V-K-2,5-OE NPN, plug 54387 SMT-8M-NS-24V-K-0,3-M8D Magnetic reed N/O contact Technical data 65 Cable, 8 ft 543862 SME-8M-ZS-24V-K-2,5-OE Plug 54386 SME-8M-DS-24V-K-0,3-M8D Connecting cable, straight socket 8 ft 54333 NEBU-M8G3-K-2.5-LE3 Ordering Data One-way Flow Control Valves for Exhaust Air Flow Control Technical Data 254 Function For Size Tubing O.D. [in] Part No. Type 4 One-way flow control valve with slotted head screw, metal 2) 8, 2 Â 564840 GRLA-0-32-UNF-QB-5/32-U 8 ¼ 564842 GRLA-0-32-UNF-QB-/4-U 25, 32 ¼ 534658 GRLA-/8-QB-/4-U 40, 50 Ä 534662 GRLA-/4-QB-5/6-U 63 Ä 534665 GRLA-3/8-QB-5/6-U 2) The recommended flow control valves are based on a tubing length to the valve of m. For deviations of ±50%, flow control valves with a bigger or smaller flow rate must be selected to guarantee the optimum flow control function and cylinder speed. Lead Time LT for all products on this page: D typically ships same day/next day 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 8

Linear drives DGC Metric Series Ordering Data Ordering Data For Size Part No. Type 8 Profile mounting 8 53752 MUC-8 25 53753 MUC-25 32 53754 MUC-32 40 53755 MUC-40 50 53756 MUC-50 63 53757 MUC-63 9 Slot nut 2) 25, 32, 40 547264 HMBN-5-M5 aj Foot mounting 50, 63 86566 HMBN-5-2M5 8 533667 HPC-8 25 533668 HPC-25 32 533669 HPC-32 40 533670 HPC-40 50 545236 HPC-50 63 545237 HPC-63 Ordering Data For Size Part No. Type ab Moment compensator 8 53874 FKC-8 25 53875 FKC-25 32 53896 FKC-32-G 40 538962 FKC-40-G 50 545240 FKC-50/63 63 545240 FKC-50/63 ) Packaging unit 2x 0.5 m. 2) Packaging unit 0 pieces. Lead Time LT for all products on this page: D typically ships same day/next day 82 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Swivel modules DSM-2 40-B Overview Semi-rotary drives with minimum space requirement Simple coarse and precision adjustment of the swivel angle High-performance cushioning Compact, low-cost sensing Detailed product information www.festo.com/catalog/dsm Product Range Overview Function Version Size Swivel angle Torque Variants [ ] [Nm] P CC FW A Double-acting Without stop system, with fixed 2, 6, 25, 32, 40 270.25 20 swivel angle With adjustable swivel angle 2, 6, 25, 32, 40 270.25 20 2, 6, 25, 32 246.25 0 40 240 20 Variants P Flexible cushioning rings/pads on both sides CC Shock absorber at both ends Shaft with woodruff key FW A Flanged shaft Position sensing Contents Technical Data 84 Ordering Data 85 Overview 86 87 Note: All metric products can be used within inch tubing systems via hybrid fittings ( Overview on page 24) 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 83

Swivel modules DSM-2 40-B Technical Data Materials Housing, flange, stop lever: Anodized aluminum Shaft: Nickel plated steel Rotary vane: Fibreglass-reinforced plastic Fixed stops: Galvanized steel Seals: Polyurethane Technical Data Size 2 6 25 32 40 Pneumatic connection M5 Gx Cushioning Fixed (P) Flexible cushioning rings/pads at both ends Adjustable (CC) Self-adjusting at both ends Torque at 6 bar [Nm].25 2.5 5 0 20 Swivel angle Fixed (P) [ ] 270 Adjustable (CC) [ ] 246 240 Max. perm. swivelling frequency Fixed (P) [Hz] 2 Adjustable (CC).5 0.7 Max. perm. radial load ) [N] 45 75 20 200 350 Max. perm. axial load ) [N].25 2.5 5 0 20 Max. cushioning angle [ ] 5 2 0 2 6 /length [mm] 60/69 7/83 84/98 06/28 3/56 ) On the drive shaft. Operating Conditions Size 2 6 25 32 40 Operating medium Compressed air in accordance with ISO 8573-:200 [7: : ] Operating pressure [bar] 2 0.5 0 Temperature range ) [ C] 0 +60 ) Note operating range of proximity sensors. 84 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Swivel modules DSM-2 40-B Ordering Data Ordering Data with Spigot Shaft Piston Swivel Angle [mm] Part No. Type LT without stop system 2 270 54759 DSM-2-270-A-B D 6 547592 DSM-6-270-A-B D 25 547593 DSM-25-270-A-B D 32 547594 DSM-32-270-A-B D 40 547595 DSM-40-270-A-B D with flexible cushioning rings/pads at both ends, adjustable swivel angle 2 270 547570 DSM-2-270-P-A-B D 6 547574 DSM-6-270-P-A-B D 25 547578 DSM-25-270-P-A-B D 32 547582 DSM-32-270-P-A-B D 40 547586 DSM-40-270-P-A-B D with self-adjusting shock-absorbers at both ends, adjustable swivel angle 2 246 547572 DSM-2-270-CC-A-B D 6 547576 DSM-6-270-CC-A-B D 25 547580 DSM-25-270-CC-A-B D 32 547584 DSM-32-270-CC-A-B D 40 240 547588 DSM-40-270-CC-A-B D Ordering Data with Flanged Shaft Piston Swivel Angle [mm] Part No. Type LT without stop system 2 270 547596 DSM-2-270-FW-A-B D 6 547597 DSM-6-270-FW-A-B D 25 547598 DSM-25-270-FW-A-B D 32 547599 DSM-32-270-FW-A-B D 40 547600 DSM-40-270-FW-A-B D with flexible cushioning rings/pads at both ends, adjustable swivel angle 2 270 54757 DSM-2-270-P-FW-A-B D 6 547575 DSM-6-270-P-FW-A-B D 25 547579 DSM-25-270-P-FW-A-B D 32 547583 DSM-32-270-P-FW-A-B D 40 547587 DSM-40-270-P-FW-A-B D with self-adjusting shock-absorbers at both ends, adjustable swivel angle 2 246 547573 DSM-2-270-CC-FW-A-B D 6 547577 DSM-6-270-CC-FW-A-B D 25 54758 DSM-25-270-CC-FW-A-B D 32 547585 DSM-32-270-CC-FW-A-B D 40 240 547589 DSM-40-270-CC-FW-A-B D LT = Lead time D typically ships same day/next day 3D typically ships within 3 days 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 85

Swivel modules DSM-2 40-B Peripherals Overview 7 9 aj 8 4 5 4 6 5 7 6 8 9 2 3 Freewheel unit FLSM flsm 2 Push-on flange FWSR 87 3 Mounting plate HSM 87 4 Push-in fitting QS 87 5 One-way flow control valve GRLA 87 6 Shock absorber retainer DSM-B 87 7 Shock absorber DYSC 87 8 Cushioning kit DSM- -P-B, with flexible fixed stop 87 9 Sensor retainer SL-DSM-B 87 aj Proximity sensor SME-/SMT-0 87 Page/Internet 86 Internet: www.festo.com/catalog/... FAST Program Catalog Subject to change 202/0

Swivel modules DSM-2 40-B Ordering Data Sensor retainer SL For size Part No. Type 2, 6, 25, 32, 40 55066 SL-DSM-B Cushioning kit, with flexible fixed stop 2 550657 DSM-2-P-B 6, 25 550658 DSM-6/25-P-B 32 550659 DSM-32-P-B 40 550660 DSM-40-P-B Shock absorber DYSC 2 5480 DYSC-5-5-YF 6/25 54802 DYSC-7-5-YF 32 54803 DYSC-8-8-YF 40 54804 DYSC-2-2-YF Shock absorber retainer 2 547900 DSM-2-B 6 54790 DSM-6-B 25 547902 DSM-25-B 32 547903 DSM-32-B 40 547904 DSM-40-B Ordering Data Mounting plate HSM For size Part No. Type 2 6557 HSM-2 6 65572 HSM-6 25 65573 HSM-25 32 65574 HSM-32 40 65575 HSM-40 Push-on flange FWSR 2 4659 FWSR-2 6 3239 FWSR-6 7053 FWSR-6-M5 25 3240 FWSR-25 7054 FWSR-25-M5 32 324 FWSR-32 40 4656 FWSR-40 Ordering Data Proximity Sensors and Connecting Cables Description Part No. Type Proximity sensor for C-slot, magneto-resistive N/O contact Technical data 68 PNP, cable, 2.5 m 55373 SMT-0M-PS-24V-E-2,5-L-OE PNP, plug 55375 SMT-0M-PS-24V-E-0,3-L-M8D Magnetic reed N/O contact Technical data 69 Cable, 2.5 m 55369 SME-0M-ZS-24V-E-2,5-L-OE Plug 55367 SME-0M-DS-24V-E-0,3-L-M8D Connecting cable, straight socket 2.5 m 54333 NEBU-M8G3-K-2.5-LE3 Ordering Data One-way Flow Control Valves for Exhaust Air Flow Control Technical Data 254 Function For [mm] Tubing O.D. [mm] Part No. Type 2, 6, 25 4 97577 GRLA-M5-QS-4-RS-D 6 97578 GRLA-M5-QS-6-RS-D 32, 40 4 97580 GRLA-/8-QS-4-RS-D 6 9758 GRLA-/8-QS-6-RS-D Ordering Data Push-in Fittings QB Function For [mm] Tubing O.D. [mm] Part No. Type 2, 6, 25 4 53304 QSM-M5-4 6 53306 QSM-M5-6 32, 40 4 5300 QS-/8-4 6 53002 QS-/8-6 Technical Data 246 Lead Time LT for all products on this page: D typically ships same day/next day 202/0 Subject to change FAST Program Catalog Internet: www.festo.com/catalog/... 87

Product Range and Company Overview A Complete Suite and Company Overview Our experienced engineers provide complete support at every stage of your development process, including: conceptualization, analysis, engineering, design, assembly, documentation, validation, and production. Custom Automation Components Complete custom engineered solutions Custom Control Cabinets Comprehensive engineering support and on-site services Complete Systems Shipment, stocking and storage services The Broadest Range of Automation Components With a comprehensive line of more than 30,000 automation components, Festo is capable of solving the most complex automation requirements. Electromechanical Electromechanical actuators, motors, controllers & drivers Pneumatics Pneumatic linear and rotary actuators, valves, and air supply PLCs and I/O Devices PLC s, operator interfaces, sensors and I/O devices Supporting Advanced Automation As No One Else Can! Festo is a leading global manufacturer of pneumatic and electromechanical systems, components and controls for industrial automation, with more than 2,000 employees in 56 national headquarters serving more than 80 countries. For more than 80 years, Festo has continuously elevated the state of manufacturing with innovations and optimized motion control solutions that deliver higher performing, more profitable automated manufacturing and processing equipment. Our dedication to the advancement of automation extends beyond technology to the education and development of current and future automation and robotics designers with simulation tools, teaching programs, and on-site services. Quality Assurance, ISO 900 and ISO 400 Certifications Festo Corporation is committed to supply all Festo products and services that will meet or exceed our customers requirements in product quality, delivery, customer service and satisfaction. To meet this commitment, we strive to ensure a consistent, integrated, and systematic approach to management that will meet or exceed the requirements of the ISO 900 standard for Quality Management and the ISO 400 standard for Environmental Management. 900:CERTC5-6248-2006-AQ-ESN-TGA ISO 900 ISO 400 Certified Company 400:CERTC5-6248A-2006-AQ-ESN-TGA Copyright 2008, Festo Corporation. While every effort is made to ensure that all dimensions and specifications are correct, Festo cannot guarantee that publications are completely free of any error, in particular typing or printing errors. Accordingly, Festo cannot be held responsible for the same. For Liability and Warranty conditions, refer to our Terms and Conditions of Sale, available from your local Festo office. All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, electronic, mechanical, photocopying or otherwise, without the prior written permission of Festo. All technical data subject to change according to technical update. Printed on recycled paper at New Horizon Graphic, Inc., FSC certified as an environmental friendly printing plant.

Festo North America Festo Canada 2 Montréal 3 Québec City Headquarters Festo Inc. 5300 Explorer Drive Mississauga, ON L4W 5G4 5600, Trans-Canada Pointe-Claire, QC H9R B6 2930, rue Watt#7 Québec, QC GX 4G3 Festo Regional Contact Center Canadian Customers Commercial Support: Tel: 877 GO FESTO ( 877 463 3786) Fax: 877 FX FESTO ( 877 393 3786) Email: festo.canada@ca.festo.com 4 Festo United States 5 Appleton 7 Detroit Headquarters Festo Corporation 395 Moreland Road North 922 Tower View Drive, Suite N Greenville, WI 54942 Hauppauge, NY 788 6 Chicago 8 85 W Algonquin - Suite 340 Arlington Heights, IL 60005 Technical Support: Tel: 866 GO FESTO ( 866 463 3786) Fax: 877 FX FESTO( 877 393 3786) Email: technical.support@ca.festo.com 44 West Long Lake Road Troy, MI 48098 Silicon Valley 4935 Southfront Road, Suite F Livermore, CA 94550 Catalog No. 3098639 2.2 USA Customers Commercial Support: Tel: 800 99 FESTO ( 800 993 3786) Fax: 800 96 FESTO ( 800 963 3786) Email: customer.service@us.festo.com Subject to change Technical Support: Tel: 866 GO FESTO ( 866 463 3786) Fax:800 96 FESTO( 800 963 3786) Email: product.support@us.festo.com Internet: www.festo.ca

2024 © autodocbox.com Privacy Policy | Terms of Service | Feedback