Introduction Automatic Type 2 coordination The right circuit breaker for all applications The KT 7 circuit breaker family consists of two basic frame sizes of mm and 5 mm in three variations with different protection characteristics all covering currents up to Amps. KTA 7 Motor protection circuit breaker KTB 7 Starter protection (magnetic only) KTC 7 Transformer and high inrush current motors Protection characteristic Magnetic Thermal KT 7 available in two frame sizes Motor KTA 7 Starter KTB 7 Transformer KTC 7 1 x Ie 1 x Ie x Ie Yes None Yes Simplified assembly and stock For the entire range, a common and complete array of accessories are available. Auxiliary contacts, trip contacts and voltage / undervoltage release can be snappedon or built into the KT 7 devices without tools. The circuit breakers follow consistently the ideas of the Advanced Control System (ACS). All components are designed for electrical and dimensional coordination which makes assembly extremely easy. Consistent 9 mm spacing simplifies planning and installation. CA 7 and KTA 7 22 kw with type 2 coordination Tomorrow s technology today Sophisticated construction and the latest technology in materials results in outstanding features and performance without the need for current limiters. High and effective current limiting and an extremely short dropout time produces an excellent short circuit breaking capacity. Combined with other ACS components, powerful load feeders are assembled in an economical way. Type 2 coordination is automatic Due to the high speed performance, the circuit breakers are compatible electrically and mechanically with short circuit coordination Type 2 according to IEC 6097. No oversizing of the contactor is required, therefore you save time in selection and planning with security in operation assured. Clear visual and electrical signals The rotary handle ensures quick and secure recognition of the operating status. The jump mechanism has exactly defined operation modes i.e., Off, On and Trip. Manipulation errors are almost impossible. To reset a trip contact, simply reset the circuit breaker. You will always see the real operating state of the load feeder represented. The various trip contacts allow optimal plant floor production by quickly detecting defective system parts. The unique front mounted trip contact saves valuable panel space. A red short circuit trip flag clearly shows the reason for trip. Complete type 2 coordinated starter with connection links OFF ON TRIPPED 2
Main features KT 7 has more advantages Standard and high breaking capacity up to Amps No current limiters required Differential phase failure protection Magnetic only version for starter combinations with separate overload (e.g. CEP 7) Version for high inrush current loads or transformer switching Common accessories up to Amps Rotary handle for all frame sizes Front and side mount auxiliary contacts Test trip lever Separate signalling of thermal and short circuit tripping Rotary door interlock extension handle Highly flexible accessories Front mounted trip and signal contacts Side mounted shunt and undervoltage trip modules Compact busbars in different spacing Handle padlock accessory Disconnect device with control circuit testing facility Shunt trip module Undervoltage trip module Padlockable handle KT 7 DS for padlocks Short circuit breaking capacity I cu The rapid current limiting characteristic of KT 7 ensures a minimum breaking capacity of ka over the range up to Amps ( Amps including the KTA ). Front mounted auxiliary contact Compact busbar Efficient termination to IEC 97 Reliability starts with good terminations. The terminals of the Amp frame allow for up to 6 mm wire size while the Amp frame size uses effective cage terminals with two separate wire compartments. Reliable contacts with jump system The switching mechanism prevents teasing of the contact system during manual operation and preserves the life of the contact system, (Important for motor starting). Tripped
KTA 7S ACS motor protection circuit breakers KT 7 Technical information characteristics Motor protection circuit breaker Rated Thermal Magnetic Switching of phase AC motors, AC 21, AC Icu Ics operational release release current Ie adjustment operating phase (kw) ( Hz) 00/ V Cat. No. (A) range (A) current (A) V 00/ V 690 V (ka) (ka) Standard range 0.1 Amp (90 x x 69.5 mm) KTA 7S0.A KTA 7S0.A KTA 7S0.A 0. 0. 0. 0.1 0. 0. 0. 0. 0. 2.1. 5.2 0.02 0.06 0.09 KTA 7S0.6A 0.6 0. 0.6 8.2 0.06 0.09 0.12 0.18 0. KTA 7S1A 1 0.6 1 1 0.12 0. 0.7 0.55 KTA 7S1.6A 1.6 1 1.6 21 0.18 0. 0.7 0.55 1.1 KTA 7SA KTA 7SA KTA 7S6.A KTA 7SA KTA 7SA KTA 7SA KTA 7SA 6. 1.6 6. 6. 18 0.7 0.55 5.5 High performance range 1.6 Amp (90 x x 79.5 mm) KTA 7H KTA 7HA KTA 7HA KTA 7H6.A KTA 7HA KTA 7HA KTA 7HA KTA 7HA 6. 1.6 6. 6. 18 0.7 0.55 5.5 High performance range 6. Amp (0 x 5 x 9.5 mm) KTA 7H KTA 7HA KTA 7HA KTA 7HA KTA 7HA KTA 7HA KTA 7HA 6..... 18 2 585.7 5.5 5.5 22 22 0 7 Notes: / V rated coils are suitable for use on /00 V in accordance with AS 6008: 00. 12
Technical information characteristics Magnetic only circuit breaker (feed or load feeder) Rated Magnetic Switching of phase AC motors, AC 21, AC Icu Ics operational release phase (kw) ( Hz) 00/ V current Ie operating Cat. No. (A) current (A) V 00/ V 690 V (ka) (ka) Standard range 0. Amp (90 x x 69.5 mm) KTB 7S0.A KTB 7S0.A KTB 7S0.A KTB 7S0.6A KTB 7S1A KTB 7S1.6A KTB 7SA 0. 0. 0. 0.6 1 1.6 2.1. 5.2 8.2 1 0.06 0.09 0.12 0.18 0. 0.7 0.02 0.06 0.09 0.12 0.18 0. 0.7 0.55 High performance range Amp (90 x x 79.5 mm) 0. 0.7 0.55 1.1 KTB 7HA KTB 7HA KTB 7H6.A KTB 7HA KTB 7HA KTB 7HA 6. 0.7 0.55 High performance range Amp (0 x 5 x 9.5 mm) KTB 7HA KTB 7HA KTB 7HA 585 5.5 6. 1 22 22 0 7 High current circuit breakers Rated Thermal Magnetic Switching of phase AC motors, AC 21, AC Icu Ics operational release release phase (kw) ( Hz) 00/ V current Ie adjustment operating Cat. No. (A) range (A) current (A) V 00/ V 690 V (ka) (ka) Standard range 0. Amp (90 x x 69.5 mm) KTC 7S0.A KTC 7S0.A KTC 7S0.A KTC 7S0.6A KTC 7S1A KTC 7S1.6A KTC 7SA KTC 7SA KTC 7S6.A KTC 7SA KTC 7SA 0. 0. 0. 0.6 1 1.6 6. 0.1 0. 0. 0. 0. 0. 0. 0.6 0.6 1 1 1.6 1.6 6. 6..2 5.2 8.2 1 21 0.06 0.09 0.12 0.18 0. 0.7 0.55 0.02 0.06 0.09 0.12 0.18 0. 0.7 0.55 0. 0.7 0.55 1.1 High performance range Amp (90 x x 79.5 mm) KTC 7HA KTC 7HA 5.5 High performance range Amp (0 x 5 x 9.5 mm) KTC 7HA KTC 7HA 18 2 585 5.5 6. 22 Notes: / V rated coils are suitable for use on /00 V in accordance with AS 6008: 00. 1
Technical information Time current characteristics Components for 22 kw Type 2 coordinated starter 1. Thermal release trip current: The adjustable inverse bimetal trip (with differential action) reliably protects motors against overloads. The curve shows the mean operating current at an ambient temperature of C starting from cold. Careful testing and setting ensures effective motor protection even in the case of singlephasing. Overload characteristics are also valid for transformer protection. 2. Magnetic release trip current: The instantaneous magnetic trip has a fixed operating current setting. This corresponds to 1 times the highest setting of the thermal overload trip. (Transformer protection x Ie max.) At the upper thermal trip setting, this tripping current is 1 () times; at a lower setting it is correspondingly higher. Current setting IeF: The overload trip corresponds to a thermal overload relay in a motor starter conforming to IEC 60971. If a different value is prescribed (e.g. reduced Ie for cooling medium having a temperature higher than 0 C or a place of installation higher than 00 m above sea level), the setting current is equal to the reduced rated current Ie of the motor. Notes: 1 ) Typical mean trip characteristic. For specific curves with tolerances please enquire. 1
Technical information Let through energy at V Let through current at V
Dimensions (mm).5 90 ➊ ➊ ➌ 18 2.8 ➍ ➍ ➋.5.5 5 9 62 72 KT 7S, KT 7H KT 7S KT 7H Mounting on DINrail EN 0225 Auxiliary contact (side mounted) π Undervoltage trip or shunt trip Auxiliary contact (front mounted) KT 7H KT 7H Mounting position a) KTA 7 mm KTA 7 mm