CL00 Series Lever Lockset Parts Manual
Table of Contents Outside Inside Series/ Function Type ANSI No. Function Description Page Number CL0 Passage or Closet F7 Latchbolt by lever either side. Both levers always free. CL0 Privacy, Bedroom or Bathroom F7 Throw-off latchbolt by lever. Outside lever locked by push button. Outside lever unlocked by emergency release tool outside, by rotating inside lever or by closing door. Inside lever always free. CL0H Hospital Privacy Outside lever locked by push button. Outside lever unlocked by simultaneously depressing outside pushbutton while rotating lever. Rotating inside lever or closing door also unlocks outside lever. Outside lever handle is freewheeling when locked. CL9 Hotel or Motel F9 Throw-off latchbolt by lever inside or by key outside. Push button shuts out all keys except emergency key, and projects occupancy indicator in face of cylinder. Push button released by turning inside lever or by closing door.* Outside lever always locked. Inside lever always free. Not available with other manufacturers keyways 7 CL Institutional or Utility F87 Deadlocking latchbolt by key either side. Should be used only in office or room with multiple entries. 8 CL0NT Exit Latch F89 Deadlocking latchbolt by lever inside. Outside lever always locked. Inside lever always free. 9 CL0 Half Dummy Trim Lever acts as pull only; no operation. Lever is rigid. 0 CL Entrance or Office F09 Deadlocking latchbolt by lever either side, except when turn button locks outside lever. Pushing and turning button in locks outside lever, requiring use of key outside to unlock. Turning inside lever unlocks outside lever. Pushing in and turning button locks outside lever, requiring key at all times. Turning inside lever does not unlock outside lever until button is manually turned to unlocked position. Inside lever always free. CL Classroom Intruder Deadlocking latchbolt by inside lever or outside lever except when key inside or outside locks outside lever. Outside lever is locked and unlocked by turning the key in the inside or outside lever. Inside lever always free. CL Classroom F8 Deadlocking latchbolt by lever either side, except when key outside locks outside lever. Outside lever unlocked by key outside. Inside lever always free. CL7 Storeroom or Closet F8 Deadlocking latchbolt by key in outside lever or by rotating inside lever. Inside lever always free. Indicates optional interchangeable core available.
Table of Contents Outside Inside Series/ Function Type ANSI No. Function Description Page Number CL Entry or Office F8 Deadlocking latchbolt by lever either side, except when push button locks outside lever. Push button released by turning inside lever or by key in outside lever. Closing door does not release push button. Inside lever always free. CL Communicating F80 Deadlocking latchbolt by lever either side, except when key in either lever locks and unlocks the lever independently of the other. Keyed alike unless otherwise specified. Should be used only in office or room with multiple entries. CL70 Full Dummy Trim Levers act as pulls only; no operation. Levers are rigid. 7 CL7 Apartment, Exit or Public Toilet F88 Deadlocking latchbolt by lever either side, except when key inside locks outside lever. Key outside retracts latchbolt. Key inside unlocks outside lever. Inside lever always free. Keyed alike unless otherwise specified. 8 CL7 Corridor/ Dormitory Lock F90 Throw-off latchbolt by lever either side except when pushbutton or key locks outside lever. Pushbutton released by turning inside lever or by closing door. Depressed pushbutton indicates door is locked. When outside lever is locked by key, it can only be unlocked by key. Inside lever always free. 9 CL80 Passage Lever x Blank Plate Latchbolt by lever. Lever on one side; blank plate on other side. For single or double communicating doors. 0 CL9 Service Station F0 Throw-off latchbolt by lever. Outside lever locked by slotted push button. When slotted push button is pushed in and turned, outside lever becomes freewheeling and deadlocking latch is activated. Outside lever is unlocked by using key or by rotating inside lever, when slotted push button returned to original position. Inside lever always free. Indicates optional interchangeable core available. Miscellaneous Parts... Sleeve Assemblies... - Latch Assemblies... Levers... Rose Assemblies... 7 Cylinders... 7 Strikes... 8 Installation Instructions... 0 Door Manufacturer s Template...
CL0 Passage or Closet 778F888 Inside Collar 77F708 Inside Sleeve Assembly *780F8 Latch Assembly 779F787 Bearing Assembly 778F88 Aligning Pin 77F708 Outside Sleeve Assembly 7 778F898 Outside Collar Note: Refer to pages - for part numbers associated with non-standard doors. For Lever and Rose options, see pages -7. 7
CL0 Privacy, Bedroom or Bathroom 778F888 Inside Collar *77F0 Inside Sleeve Assembly *780F8 Latch Assembly 779F787 Bearing Assembly 778F88 Aligning Pin 77F98 Outside Sleeve Assembly Note: Refer to pages - for part numbers associated with non-standard doors. For Lever and Rose options, see pages -7.
CL0H Hospital Privacy 778F888 Inside Collar *77F0 Inside Sleeve Assembly *780F8 Latch Assembly 779F787 Bearing Assembly 778F88 Aligning Pin 77F98 Oustide Sleeve Assembly 7 *778F8 Emergency Release Cylinder Note: Refer to pages - for part numbers associated with non-standard doors. For Lever and Rose options, see pages -7. 7
CL9 Hotel or Motel 778F888 Inside Collar *77F0 Inside Sleeve Assembly *780F8 Latch Assembly 779F787 Bearing Assembly 778F88 Aligning Pin 77F78 Outside Sleeve Assembly Note: Refer to pages - for part numbers associated with non-standard doors. For Lever and Rose options, see pages -7. 7
CL Institutional or Utility 77F88 Inside Sleeve Assembly *780F8 Latch Assembly 779F787 Bearing Assembly 778F88 Aligning Pin 77F8 Outside Sleeve Assembly Note: Refer to pages - for part numbers associated with non-standard doors. For Lever and Rose options, see pages -7. 8
CL0NT Exit Latch 778F888 Inside Collar 77F878 Inside Sleeve Assembly *780F8 Latch Assembly 779F787 Bearing Assembly 778F88 Aligning Pin 77F8 Outside Sleeve Assembly Note: Refer to pages - for part numbers associated with non-standard doors. For Lever and Rose options, see pages -7. 9
CL0 Half Dummy Trim 0F78 Screw, combo #8 PH 790F988 Inside Mounting Flange Assembly *0F0 Cup Washer *0F8 Machine Screw /-0 x -/ Note: Refer to pages - for part numbers associated with non-standard doors. For Lever and Rose options, see pages -7. 0
CL Entrance or Office 778F888 Inside Collar *77F00 Inside Sleeve Assembly *780F8 Latch Assembly 779F787 Bearing Assembly 778F88 Aligning Pin 77F8 Outside Sleeve Assembly Note: Refer to pages - for part numbers associated with non-standard doors.
CL Classroom Intruder 778F888 Inside Collar 77F88 Inside Sleeve Assembly *780F8 Latch Assembly 779F787 Bearing Assembly 778F88 Aligning Pin 77F88 Outside Sleeve Assembly ** Screws are provided in a packet for the latch and strike (ANSI std) and are not sold separately. Note: Refer to pages - for part numbers associated with non-standard doors. For Lever and Rose options, see pages -7.
CL Classroom 778F888 Inside Collar 77F708 Inside Sleeve Assembly *780F8 Latch Assembly 779F787 Bearing Assembly 778F88 Aligning Pin 77F8 Outside Sleeve Assembly Note: Refer to pages - for part numbers associated with non-standard doors. For Lever and Rose options, see pages -7.
CL7 Storeroom or Closet 778F888 Inside Collar 77F878 Inside Sleeve Assembly *780F8 Latch Assembly 779F787 Bearing Assembly 778F88 Aligning Pin 77F8 Outside Sleeve Assembly Note: Refer to pages - for part numbers associated with non-standard doors. For Lever and Rose options, see pages -7.
CL Entrance or Office 778F888 Inside Collar *77F0 Inside Sleeve Assembly *780F8 Latch Assembly 779F787 Bearing Assembly 778F88 Aligning Pin 77F8 Outside Sleeve Assembly Note: Refer to pages - for part numbers associated with non-standard doors. For Lever and Rose options, see pages -7.
CL Communicating 778F888 Inside Collar 77F88 Inside Sleeve Assembly *780F8 Latch Assembly 779F787 Bearing Assembly 778F88 Aligning Pin 77F8 Outside Sleeve Assembly Note: Refer to pages - for part numbers associated with non-standard doors. For Lever and Rose options, see pages -7.
CL70 Full Dummy Trim 0F78 Screw, combo #8 PH 8 790F988 Inside Mounting Flange Assembly 790F998 Outside Mounting Flange Assembly 0F8 Machine Screw /-0 x -/ Note: Refer to pages - for part numbers associated with non-standard doors. For Lever and Rose options, see pages -7. 7
CL7 Apartment, Exit or Public Toilet 778F888 Inside Collar 77F88 Inside Sleeve Assembly *780F8 Latch Assembly 779F787 Bearing Assembly 778F88 Aligning Pin 77F8 Outside Sleeve Assembly Note: Refer to pages - for part numbers associated with non-standard doors. For Lever and Rose options, see pages -7. 8
CL7 Corridor/Dormitory Lock 778F888 Inside Collar 77F0 Inside Sleeve Assembly *780F8 Latch Assembly 779F787 Bearing Assembly 778F88 Aligning Pin 77F88 Outside Sleeve Assembly Note: Refer to pages - for part numbers associated with non-standard doors. For Lever and Rose options, see pages -7. 9
CL80 Passage Lever x Blank Plate 778F888 Inside Collar 77F708 Inside Sleeve Assembly *780F8 Latch Assembly 779F787 Bearing Assembly 778F88 Aligning Pin 9F808 Countersunk Flat Head Screw 0- x /8" (-/" Door) 7 778F98 Anchor Plate 8 *778F9 Rosette Plug ** Screws are provided in a packet for the latch and strike (ANSI std) and are not sold separately. Note: Refer to pages - for part numbers associated with non-standard doors. For Lever and Rose options, see pages -7. 7 8 0
CL9 Service Station or Public Restroom 778F888 Inside Collar *77F0 Inside Sleeve Assembly *780F8 Latch Assembly 779F787 Bearing Assembly 778F88 Aligning Pin 77F8 Outside Sleeve Assembly Note: Refer to pages - for part numbers associated with non-standard doors. For Lever and Rose options, see pages -7.
Miscellaneous Parts Collar/Rosette Installation Wrench Allen Key Wrench M Screwdriver CL00 778F8 Part No. 778F8 Part No. 780F8 Part No. 780F08 Screw Packet Containing countersunk flat head combination screw # x /", countersunk flat head combination screw #8 x /" Mounting Kit Packet For CL0 Half Dummy Trim and CL70 Full Dummy Trim Rose Installation Tool *Specify Finish Part No. *0F8 Part No. *77F908 - CL0 77F98 - CL70 Part No. 7F98
Sleeve Assemblies Standard Sleeve Assemblies Part No. 0 0 0H 9 0NT 7 7 7 80 9 *77F00 I/S *77F0 I/S *77F0 I/S *77F0 I/S *77F0 I/S I/S I/S 77F8 O/S O/S O/S O/S O/S 77F8 O/S 77F8 O/S 77F8 O/S O/S 77F78 O/S 77F88 O/S O/S 77F98 O/S O/S 77F708 I/S- O/S I/S I/S 77F88 I/S I/S 77F88 I/S 77F88 I/S 77F878 I/S I/S D Sleeve Assemblies Part No. 0 0 0H 9 0NT 7 7 7 80 9 *77F0 I/S *77F0 I/S *77F07 I/S *77F08 I/S *77F09 I/S I/S I/S 777F8 O/S O/S O/S O/S O/S 777F8 O/S 777F8 O/S 777F8 O/S O/S 777F78 O/S 777F88 O/S O/S 777F98 O/S O/S 777F708 I/S- O/S I/S I/S 777F88 I/S I/S 777F88 I/S 777F88 I/S 777F878 I/S I/S
Sleeve Assemblies Sleeve Assemblies Interchangeable Core Part No. 7 7 7 9 77F78 O/S O/S O/S O/S O/S 77F78 O/S 77F78 O/S O/S 77F78 O/S O/S 77F98 I/S I/S 77F98 I/S I/S 77F98 I/S 77F98 I/S Sleeve Assemblies - M (/" Throw Fire Latch) Part No. 0 7 7 80 779F8 O/S O/S O/S 779F8 O/S Standard Interchangeable Core 779F8 I/S-O/S I/S I/S 779F78 I/S 779F78 I/S 779F78 I/S 779F8 O/S O/S O/S 779F78 O/S 779F78 I/S M Sleeve Assemblies Part No. 9 7 7 7 9 77F78 O/S O/S O/S O/S O/S Standard Interchangeable Core 77F78 O/S 77F778 O/S O/S 77F788 O/S 77F798 O/S O/S 77F98 I/S I/S 77F98 I/S 77F978 I/S 77F808 O/S O/S O/S O/S O/S 77F88 O/S 77F88 O/S O/S 77F88 O/S O/S 77F988 I/S I/S 77F998 I/S 777F08 I/S M Sleeve Assemblies - D Part No. 9 7 7 7 9 777F78 O/S O/S O/S O/S O/S Standard Interchangeable Core 777F78 O/S 777F778 O/S O/S 777F788 O/S 777F798 O/S O/S 777F98 I/S I/S 777F98 I/S 777F978 I/S 777F808 O/S O/S O/S O/S O/S 777F88 O/S 777F88 O/S O/S 777F88 O/S O/S 777F988 I/S I/S 777F998 I/S 778F08 I/S
Latch Assemblies Standard* Code Lock Function 0 0 0H 9 0NT 7 7 7 80 9 780F8 A x 780F8 B x x x x x x x x x 780F8 C x x 780F8 D x x x 780F8 K x -/" Backset* 780F8 A x 780F87 B x x x x x x x x x 780F88 C x x 780F89 D x x x 780F90 K x " Backset* 780F9 A x 780F9 B x x x x x x x x x 780F9 C x x 780F9 D x x x 780F9 K x M /" Throw Fire Latch* 780F9 x x x x x x Note: Code letter stamped on inside corner of latch front identifies function(s) compatible with the latch assembly. *Specify Finish
Standard Levers and Components Newport NZD Lever: Die cast zinc Rose: Stamped brass -/" -/" -/" Standard Levers Application Plain Cylinder or Button Emergency Key Hole Intruder Sargent Cylinder Cutout Sargent Cylinder Cutout - Intruder I/C Cylinder - Pin I/C Cylinder - Pin Intruder I/C Cylinder - 7 Pin I/C Cylinder - 7 Pin Intruder Best Cylinder Cutout Best Cylinder Cutout Intruder Schlage IC Cylinder Cutout Schlage IC Cylinder Cutout - Intruder NZD 790F 790F 790F 790F 790F 790F 790F9 790F0 790F 790F 790F 790F 790F7 790F8 M Levers (Security) Application Plain Cylinder or Button Emergency Key Hole Intruder Sargent Cylinder Cutout Sargent Cylinder Cutout - Intruder I/C Cylinder - Pin I/C Cylinder - Pin Intruder I/C Cylinder - 7 Pin I/C Cylinder - 7 Pin Intruder Best I/C Cylinder Cutout Best I/C Cylinder Cutout Intruder Schlage I/C Cylinder Cutout Sargent I/C Cylinder Cutout - Intruder NZD 780F 780F 780F 780F 780F 780F 780F9 780F0 780F 780F 780F 780F 780F7 780F8
Rose Assemblies D Rose (standard) -/" Dia. Wrought C Rose -/" Dia. Wrought E Rose -/8" Sq. Wrought K Rose -/" Dia. Wrought 78F* - Rose Assembly 779F97* - Rose Assembly 778F90* - Rosette 779F98* - Rose Assembly 778F97* - Rosette 779F99* - Rose Assembly 778F90* - Rosette 7
Cylinders â.9" plug dia. Pyramid.09" plug dia. conventional." plug dia. security Brass, -pin nickel silver keys Finishes: 0,.9" plug dia. Pyramid.09" plug dia. conventional." plug dia. security Brass, -pin nickel silver keys Finishes: 0,,,,,, 0 Compatibility with Competitive Cylinders Competitive Cylinders Schlage conventional -00, -00 or -0 (Quick Code M0) Schlage Primus 0-8, 0-78 or 0-70 (Quick Code M0) Best style core, or 7 Pin (Quick Code M08) Sargent - (Quick Code M09) Schlage IC Core (Quick Code M9) Corbin Russwin LFIC Tailpiece Parts Required for Installation 778F788 Tailpiece included with M0 options. 778F788 Tailpiece included with M0 options. 780F8 Kit includes driver and SFIC & 7 pin spacers. 77F98 Tailpiece kit and special lever included. 780F Kit includes tailpiece and retaining ring. Specify option M9. 780F8 Kit includes driver, spacer, and security disc for LFIC & 7 pin. Cylinder Catalog # Description Interchangeable Core 000-0 Conventional -Pin 8000 000-0-7 Conventional 7-Pin 8000-7 00-0 Emhart Security 800 00-0 Hotel -Pin 800-0 00-0-7 Hotel 7-Pin 800-0-7 07-0 Pyramid Security 807 00-0 Pyramid High Security 800 00-0-C Schlage C Keyway NA 00-0-LA Sargent LA Keyway NA 00-0-CK Schlage C-K Keyway NA 8
Strikes -/" () -7/8" () -/8" (9) -/" (70) -/8" (8) -/" (8) -/" () -/" () ANSI Curved Lip (standard) Brass or bronze -7/8" (mm) x -/" (mm) x -/" (mm) lip to center. Optional lip lengths: " (mm), -/8" (9mm), -/8" (mm), -/" (8mm), -/" (mm), " (mm), -/" (7mm), -/" (mm), -/" (70mm), " (7mm). To order, specify 7L x Lip Length x Finish. Part No. 7L Curved Lip T Strike (optional) Brass, bronze, or stainless steel -/" (70mm) x -/8" (9mm) x -/" (mm) lip to center. Optional lip lengths: " (mm), -/8" (9mm), -/8" (mm), -/ (8mm), -/" (mm), " (mm), -/" (7mm), -/" (mm), -/" (70mm), " (7mm). To order, specify 8L9 x Lip Length x Finish. Part No. 8L9 ANSI Wrought Strike Box To order, specify 0F7-8. Part No. 0F78 9
Installation Instructions 0
Door Manufacturers Template
In U.S. Corbin Russwin Architectural Hardware Episcopal Road Berlin, CT 007 Phone: 800--8 Fax: 800-7-7 corbinrusswin.com In Canada ASSA ABLOY Door Security Solutions Canada 0 Four Valley Drive Vaughan, Ontario Canada LK T9 Phone: 800--007 Fax: 90-78-78 www.assaabloy.ca For more information regarding Corbin Russwin Locksets, Exit Devices, Door Controls and Key Systems, contact your authorized Corbin Russwin Distributor or Sales Representative. Corbin Russwin and Design is a registered trademark of Corbin Russwin, Inc, an ASSA ABLOY Group company. Other products' brand names may be trademarks or registered trademarks of their respective owners and are mentioned for reference purposes only. These materials are protected under US copyright laws. All contents current at time of publication. Corbin Russwin, Inc., an ASSA ABLOY Group company reserves the right to change availability of any item in this catalog, its design, construction, and/ or its materials. Copyright 0 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited. -/N