Stainless One-touch Fittings Series KG Guide Collet Chuck Accepts nylon, soft nylon and polyurethane tubes. as large retaining force. Chuck certainly bites tube and collet increases retaining force. Release button (White) Small disconnecting force. When the fitting is removed, the chuck and collet are released, thus preventing them from biting into the tube excessively. Unique shape of easy tube release. Packing Can be used for a wide range of pressures from a low vacuum up to a pressure of 1.0Pa The use of a special profile ensures sealing and reduces resistance when the tube is inserted. Tube Body (White) O ring Stud Possible to mount in narrow space. The body and ed portion turn. PAT. Stainless specification applicable to corrosive environments Applicable Tubing Tube material Nylon, Soft nylon, Polyurethane ø, ø, ø, ø, ø, ø1 SUS 3 stainless steel adopted for metal elements Suitable for use in CRT production lines where contact with copper must be avoided, food processing machines where water or salt water splashes and clean room where discolouration of copper material and corrosion must be avoided. Specifications Operating fluid Air, Water ax. operating pressure 1.0Pa ax. operating vacuum pressure 0kPa Proof pressure Ambient and fluid temperature Thread portion Thread Nut 3.0Pa 5 to 0 C (Water: 0 to 0 C)(No freezing) JIS B 0203 (Taper pipe ) JIS B 02 Class 2 (etric fine ) Sealant (Thread portion) With/Without sealant Note1) Applicable for general industry water. Consult us if using for other kinds of fluid. Surge pressure must be under the max. operating pressure. Note2) Suffix S to part number if sealant is desired. Component aterials Body Stud (Thread) Chuck Guide Collet, Release button Packing, O ring Stainless steel (SUS3), PBT Stainless steel (SUS3) Stainless steel (SUS) SUS, Stainless steel (SUS3), PO PO NBR 7-5
Stainless One-touch Fittings Series KG odel exagon socket head male connector KGS P.7-7 Universal male elbow KGV P.7-9 Internal hex. allows connection by using an hex. key wrench, for confined spaces. Bulkhead union KGE P.7-5 Extended male elbow KGW P.7-1 Used for junction connection of two tubes for installation of a panel. For when the elbow extends over a standard elbow for easier of connection/disconnection of tubing. Universal male elbow allows connection by using a socket wrench for confined spaces. Bulkhead connector KGE P.7-5 Used for transit connection of a tube and a male screw for installation of a panel. ale connector KG P.7-7 Used to pipe in the same direction from female ed portion. ost common style. ale elbow KG P.7- Used to pipe in right angle to female ed portion. ost common style. Branch tee KGT P.7-1 Used to branch line from female in both 90 directions. Female connector KGF P.7- Used to pipe from the male ed portion such as a pressure gage. Union elbow KG P.7-0 tubes at right angles. Union tee KGT P.7-1 tubes in both 90 directions. Straight union KG P.7- tubes in the same direction. Plug-in elbow KG P.7-0 Used to change by 90 in a tube fetching direction from Onetouch fittings. Different dia. tee KGT P.7-2 tubes with size down in both 90 directions. Different dia. straight KG P.7- ale branch connector KGU P.7-9 different size tubes. Used for connection at right angles from the female. ale delta KGD Delta KGD P.7-2 P.7-3 Used for two branch piping at ritht angles from female. Used for three branch connections of tubes at right angles. ale run tee KGY P.7-2 Different dia. double union Y KGUD P.7- Used for a branch line in the same direction from female and in 90 directions. Used for four branch connections in the same direction, reducing the size of the tubes. Branch union elbow KGU P.7-0 Used for connection of tubes at right angles. Double branch KGUD P.7-3 Used for four branch piping in the same direction from the female. Union Y KGU P.7- tubes in the same direction. 7-
Series KG odel Different dia. union Y KGU P.7- tubes with size down in the same direction Plug-in reducer KGR P.7- Used to change size of One-touch fittngs. Tube cap KGC PP.7-5 Used to plug the unused tube. Branch Y KGU P.7-3 Used to branch line in the same direction from female. ale connector: KG <5> <> 1 (ex.) 5 KG0-5.9.7 2. 1 KG0-01.1 1 9 1 5. 1 KG0-02 1.5 1 5 1 1 KG0-5 KG0-01 KG0-02 1...5 1.7 1.5.5.1. 3. 1 1 3 KG0-03.5 27 1 KG0-01 27.1 2 1 1 KG0-02 2 20.5 1.5 2.1 1.0 3 1 KG0-03 KG-01.1.5 2 2 1 KG-02 33 27.5 1.5.5 3 KG-03 27.9.5 1 2 KG-0 2.1 53 1 KG-02 3 2.5 2 3 KG-03 2.9.5 5.3.1 3 1 2 KG-0.1 51 3 KG1-03 3. 32 1 1 2 1 2 2 KG1-0 33. 2.5 3 (9) 7 Reference dimensions after installation. A exagon socket head male connector: KGS <5> <> 5 1 5 1 (ex.) 2..1 3..0 9.9.7.0.2.3 1.2 KGS0-5 KGS0-01 KGS0-5 2.5 3 2.5 9. 1.7.1.5. 1..7 1.5 3.2 KGS0-01..1 9 20 1 KGS0-02..5 1 KGS0-01 5 27.1 2 1 1 KGS0-02 25.5 1.5 3 KGS0-03 2. 2 1 KGS-01 5.1 2.2.0 1 1 KGS-02 27.5 3 KGS-03 2. 39.0 2. 1 2 KGS-0 27.1 20 1 KGS-02 33 27.5.0 3 KGS-03 27.9.5.5 1 1 0.0 2 KGS-0 27.1 20 A Reference dimensions after installation. 7-7
Stainless One-touch Fittings Series KG Female connector: KGF Straight union: KG 1 2 (ex.) 1 KGF0-01 1 27 1 5. 1 KGF0-02 31 1 1 1 KGF0-01 KGF0-02 1 27.5 31.1. 3 1 1 3 KGF0-03 KGF0-01 KGF0-02 KGF0-03 1 1 33.5 32.5 33.5 1 1.5 2.1 1.0 25 2 2 1 KGF-02 3.5 1 27 1.5.5 3 KGF-03 3.5 1 KGF-02 3 1 3 KGF-03 37 5.3.1 31 1 2 KGF-0 2 1 1 52 KG0-00. 32.5 1 5. 3 KG0-00. 3.5.1. KG0-00.2 3.5 1.5 2.1 1.0 KG-00 1.5 2.5 1.5.5 KG-00.5 5.3.1 1 Reference dimensions after installation. Different dia. straight: KG 1 2 = > KG0-0. 3.5 1 5. 5 KG0-0.2 3.5 1.5.1. KG0-1.5 2 1.5 2.1 1.0 KG-.5 1.5.5 1 ale elbow: KG <5> <> 1 5 1 1 5 1 1 3 1 1 3 1 1 3 1 2 1 3 1 2 3 1 2 KG0-5 KG0-01 KG0-02 KG0-5 KG0-01 KG0-02 KG0-03 KG0-01 KG0-02 KG0-03 KG-01 KG-02 KG-03 KG-0 KG-02 KG-03 KG-0 KG1-03 KG1-0 (ex.) D1 D2 1 2 A 7 9.3..7.3.7 3.5 3.5 2.7.1. 1 1.2.2 1 25.5 25 7. 1.1 1.7..5 3.5 3.5 3.1.1 25.5 1. 20 2.5 27.5. 9.0 27.9 33. 2 1.2 2 1.5. 1.9. 31.5 2.1 32. 1.9 25.5 33 2 1.5 2.5.9 3.5.2 25.0 3.1 37 3.5.5 2 2.5 31.9 37 50.2 39.7 3 3.1 39.5 5 2.5 33 3.9.5 71 (71) 1 2 0.1 0 () 5 Reference dimensions after installation. Note1) ( ): Values for soft nylon. Note2) 1: max. diameter 7-
Series KG ale branch connector: KGU <5> <> 3 2 Q2 A ø ø.2 2-applicable tubing 1 Q1 1 P 2 x applicable tubing (ex.) 5 KGU0-5 1 KGU0-01 1 KGU0-02 1 5 KGU0-5 1 KGU0-01 1 3 1 1 3 KGU0-02 KGU0-03 KGU0-01 KGU0-02 KGU0-03 1 1 KGU-02 3 KGU-03 1 2 1 3 KGU-0 KGU-02 KGU-03 1 2 KGU-0 1 2 3 A P Q1 Q2 2.5 25.5.3.1. 1.5 25. 31.1 27.5 1. 1.5.5.0.1 2.5 33.5.3.3. 2..1 32. 20.5 32.5 39 33.5.9.0 33.9 0. 33.1 0. 3.2 2 3.5 3.9. 39.5 9 3.5 1.5.2 2.5 39 3.5 1 2.3 1.2 27 1 1.5 27 39.9 9. 1.5 2 1 0..0 2 3. 53.1 5.5 2 52.5 7 57 2. 52.9 7.5 1 57.2 5.2 5 5. 5.1 9 5 Reference dimensions after installation. Q2 P 3 2 A ø ø.2 Q1 Universal male elbow: KGV <5> <> 5 1 5 1 1 1 1 3 1 3 3 1 2 KGV0-5 KGV0-01 KGV0-5 KGV0-01 KGV0-02 KGV0-01 KGV0-02 KGV0-03 KGV-02 KGV-03 KGV-03 KGV-0 (ex.) 1 1 1 2 1 2 3 A. 9. 20.5 1.5.. 25..5 1 2.9 2.9 9..5 1.5 3. 3... 2. 25..5.3.5 1.5 25 7.5 7.9.2. 1. 27. 2.5 2.5 1 31 25.5 1.5 1.2 20. 27.5.. 20.5 1.3 1.5 20. 31.5.. 27 20.3 25.2 3 37. 32 2.1 0. 33.5 39. 1 7 2 2 7 0 9 3 0 Reference dimensions after installation. Note1) 1: max. diameter 7-9
Stainless One-touch Fittings Series KG Union elbow: KG Q KG0-00. 1.5 1.2.2 KG0-00. 20 5.3. 9.0 KG0-00.2 1.5. 1.9 KG-00 1.5 2.5..2 25.0 KG-00 2.5 7.5 50.2 39.7 1 KG1-00 2.5 3 25 0 () Branch union elbow: KGU 2 1 1 3 x applicable tubing ØD 1 2 Q1 Q2 P KGU0-00. 1.5 2 1.5 1..0.1 KGU0-00. 27.5 20.5..9.0 KGU0-00.2 2 32 2.5 1 1.5.2 2.3 1.2 KGU-00 1.5 27 3.5 2 1 1.5 0..0 25 KGU-00 0 1 57.2 5.2 32 Q2 P ø ø.2 Q1 Plug-in elbow: KG Fitting size ød 1 2 1 2 A KG0-99. 1 25 1.5 1.2.2 KG0-99. 20 27.5. 9.0 KG0-99.2.5 31.5 1.5. 1.9 KG-99 KG-99 1.5 1 1 25.5 27.5 37.5.5 2.2 50.2 25.0 39.7 Note1) 1: max. diameter 1 25 2 7-0
Series KG Extended male elbow: KGW <5> <> 1 2 1 2 A (ex.) 5 KGW0-5 32 3.0 3.0 1 KGW0-01. 1 3. 3.5 1.0.0 1 KGW0-02 1 3 2.5 3 5 KGW0-5.5 33.5 3.0 3.0 1 KGW0-01 39.1 2.5 2. 20 1 KGW0-02 1 5.5.5.9. 1 3 KGW0-03.9 7 1 1 KGW0-01 KGW0-02 1.2 2. 9 7 51 1.5 20.5 1.2 7 3 KGW0-03 50. 52.5 7 1 KGW-02 5 59.5 3 KGW-03 1.5 2.5 57. 1 33.5. 7 1 2 KGW-0.1 1 KGW-02 57 2 3 KGW-03 2.5 5. 3.5 7.7 37.7 7 1 2 KGW-0 5.1.5 Reference dimensions after installation. Note1) 1: max. diameter Branch tee: KGT <5> <> 1 1 2 1 2 A (ex.) Nylon Urethane 5 KGT0-5 7 9.3..7.3.7.3.3 3.5 1 KGT0-01.1. 1 1.0.1 1 KGT0-02 1 25.5 25 5 KGT0-5 7. 1.1 1.7..5.3.3.2 1 KGT0-01.1 25.5 1 KGT0-02 1. 20 2.5 27.5.9.0 20 3 KGT0-03 27.9 3 1 1 KGT0-01 KGT0-02 1.2. 2 2 1.5 2.3 1.2 1 3 KGT0-03. 31.5 3 1 KGT-01 2.1 32 31 1 KGT-02.5 33 3 1.5 2.5 0..0 KGT-03.9 3.5 39 1 2 KGT-0.1 37 1 KGT-02.5.5 31 3 KGT-03 2.5 31.9 37 57.2 5.2 1 1 2 KGT-0 3.1 39.5 3 KGT1-03 3.9.5 71 (71) 1 2.5 3 25 1 2 KGT1-0 39. 0 (0) Reference dimensions after installation. Note1) 1: max. diameter Union tee: KGT 1 Q KGT0-00 KGT0-00 KGT0-00...2 1 20.5 5.3 1 1.5.. 25....7 7 KGT-00 KGT-00 1.5 2.5 2.5. 7.5 0 57. 2. 5. 25 KGT1-00 2.5 3 25 0 () 0 7-1
Stainless One-touch Fittings Series KG Different diameter tee: KGT = > 1 2 1 2 Q 1 2 KGT0-0...5 1.5 1 7.1.5 KGT0-0.2..5 20 5.3 1.5 1. 1. KGT0- KGT- 1.5.2 1.5 2.5 2.5 2.5. 1.5 3 5 27.2.5 Note1) 1: max. diameter 5 1 ale run tee: KGY <5> <> 1 2 1 2 3 A (ex.) 5 KGY0-5 7 9.3..7 1. 25..7.. 3.5 1 KGY0-01.1 3. 1 1.. 1 KGY0-02 1 25.5 3 5 KGY0-5 7..1 1.7.1 2.7.5...3 1 KGY0-01.1 39 1 KGY0-02 1. 20 2.5 1.. 20 3 KGY0-03 27.9 2.5 3 1 KGY0-01. 3.5.. 1 1 KGY0-02 1.2 2 5.5 1.5 25..7 3 KGY0-03. 7 3 1 KGY-01 2.1 9.5 31 1 KGY-02.5 50.5 3 1.5 2.5 0.0 2. KGY-03.9 52 39 1 2 KGY-0.1 5.5 1 KGY-02.5 53.5 31 3 KGY-03 2.5 31.9 55 57. 5. 1 1 2 KGY-0 3.1 57.5 3 1 KGY1-03 3.9 5.5 1 1 2.5 3 25 1 2 KGY1-0 0.1 7 3 (3) Reference dimensions after installation. Note1) 1: max. diameter ale delta: KGD <5> <> 1 2 A (ex.) Q 5 KGD0-5 2 25.5.3.3 1 KGD0-01. 1.5 25. 27.5 1.7.0.0 1 KGD0-02 1 5 KGD0-5 2 2.5.3.3 1 KGD0-01 2.1 31.5 1. 20.5 9.9 1 KGD0-02 1 32 33.9.9 3 KGD0-03 33. 3.5 3 1 KGD0-01 32. 37 1 KGD0-02.2.5 3 3 1.5.1 2.3 1.2 2 3 KGD0-03 3. 3.5 1 KGD-02 39 3 39 3 KGD-03 1.5 2.5 39. 3.5. 0..0 0 1 2 KGD-0 3.1 5 2 1 3 KGD-02 KGD-03 2.5 1.5 1.9.5 7.9 57.2 5.2 55 5 1 2 KGD-0 5.1.5 3 Reference dimensions after installation. 7-2
Series KG Delta: KGD KGD0-00. 1.5.7 1 KGD0-00. 20.5 9.9 KGD0-00.2.5.1 1.5 KGD-00 1.5 2.5. KGD-00.9.0.9 2.3 0..1.0 1.2.0 5 7 2.5 57.2 5.2 2 Q Branch Y : KGU <5> <> 5 KGU0-5 1 KGU0-01 1 KGU0-02 1 5 KGU0-5 1 KGU0-01 1 3 1 KGU0-02 KGU0-03 KGU0-01 1 1 KGU0-02 3 KGU0-03 1 KGU-02 3 KGU-03 1 2 KGU-0 1 KGU-02 3 KGU-03 1 2 KGU-0 (ex.) P A...2 1.5 39.5 1.1. 5.5 2.5...5 9.9 51. 55.2 55. 0.5 0.9 3 3 0 39 1.5 3.5.5 9.5 50 55 55.5 57 5.5 59 0.5 1 1.5 2.2.2 2.2. 2.2.2 2.2. 25..7 20 3 0 5 32 0 5 1.5 0 2..1. 57. 5. 7. Reference dimensions after installation. Double branch: KGUD 1 (ex.) 1 KGUD0-01 1 KGUD0-02 1 1 KGUD0-01 KGUD0-02 1 2....2 2..5 9. 53 I A 39.5 1 2.5 7.5 Q 9.7.7 1 P...2..2. 25 Reference dimensions after installation. Note1) 1: max. diameter 7-3
Stainless One-touch Fittings Series KG Union Y : KGU 1 KGU0-00. 3 1. 9.7 1 KGU0-00. 37 20..7 KGU0-00.2 2.5 2.5.2.7 1.5 KGU-00 1.5 27.5 1.5 1.1 KGU-00 51 1.1 2.2.2.. 25..7 0 2. 57. 5. P Q 7 9 1 Different diameter union Y : KGU 1 2 1 2 P Q 1 2 = > KGU0-0.. 1. 9.7 1.2.2 KGU0-0..2 39.5 20..7 1.5.. KGU0-.2 1.5 5 2.5.2.7 1.5 25..7 KGU- 1.5 9 27.5 1.5 1.1 0 2. Note1) 1, 2: max. diameter 1 27 Different diameter double union Y : KGUD 1 2 1 2 P I Q 1 2 = > KGUD0-0...5 1.2. 9.7 1.2.2 KGUD0-0..2 0.5 20.3. 2.7 1.5.. Note1) 1, 2: max. diameter Plug-in reducer: KGR Fitting size ød 1 1 A KGR0-0 KGR0-0 KGR0- KGR0-0 KGR0-0 KGR0- KGR0- KGR0- KGR0- KGR- KGR-1 KGR-1....2.2 3.5 3.5 39.5 37 37 39.5 2 1 2.5 50.5 50.5.5 1 1.5 1.5 20 20 25.5 25.5 1 1.5 5..1. 2.1 1.0 1.5 32. (.5) 5.3 (.1) 1. 2.0 3.3 3 2.5 3.7.0. 33 2 37 7-
Series KG Bulkhead union: KGE ounting T() (ex.) hole KGE0-00 X 1 1 32.5 1 5. 2 KGE0-00 1 X 1 3.5.1. 33 KGE0-00 1 X 1 3 1.5 2.1 1.0 52 KGE-00 20 X 1 2 2.5 1.5.5 70 KGE-00 X 1 27 5.3.1 90 1 KGE1-00 2 X 1.5 32 51 25 3 (9) 5 Note1) ( ): Values for soft nylon. Bulkhead connector: KGE 1 1 2 T() ounting area (mm 1 2 2 ) (ex.) (ex.) hole 1 KGE0-01 1 27.5 1 X 1 1 1 5. 1 KGE0-02 31 1 KGE0-01 2 1 KGE0-02 1 X 1 31.5.1. 3 KGE0-03 33.5 1 KGE0-01 27.5 7.5 2 1 KGE0-02 1 X 1 33 1.5 2.1 1.0 27 3 KGE0-03 1 KGE-02 3.5.5 53 20 X 1 2 1.5.5 3 KGE-03 3.5 1 7 3 KGE-03 37 1 92 X 1 1 2 27 5.3.1 2 KGE-0 1 1 59 3 KGE1-03 0 1 9 7 1 2 X 1.5 32 25 (9) 2 KGE1-0 1 3 2 Note1) ( ): Values for soft nylon. Tube cap: KGC KGC0-00. 1 3 KGC0-00. 1.5 3 KGC0-00.2 20.5 1.5 KGC-00 1.5 KGC-00 2 1 KGC1-00 2.5 2 25 7-5