ITW Binks Table of Contents

ITW Binks Table of Contents Spray Guns-Accessories HVLP Spray Guns...2 Conventional and Additional Spray Guns... 3-5 Airless Twist Tips...6 Airless Paint Spray Hose...6 Spray Gun Extensions...7 Spray Gun Cups...8 Tanks - PT ASME Code, Stainless Steel, Galvanized and Accessories... 9-11 Pumps and Pump Packages... 12-21 Finishing Systems/Packages...22 Drum Covers and Agitators...23 Fluid Regulators...24 HVLP Conversion Accessories...25 Spray Gun Accessories... 26-27 Siphon Hoses and Ball Valves...28 Air Control Equipment Accessories...29 Cartridge Respirators...30 Understanding Pressure Drop...31 Premium Spray Finishing Air Hose...32 Fluidall TM Fluid Hose...33 Specialized Hose Assemblies...34 Tubing...35 Hose/Tube Accessories...36 Adapters, Nipples, Swivels...37

HVLP Spray Guns MACH 1 SL (Slim Line) HVLP MACH 1A & 1AR HVLP MACH 1 HVLP M1-G HVLP Lightweight, top quality high performance spray gun. Body: Drop-forged anodized aluminum Weight: 16.5 oz. Air Inlet: 1/4 NPS (M) Fluid Inlet: 3/8 NPS (M) Fluid Passages: Stainless Steel Feed Type: Pressure/Siphon Feed Part Sheet: 2665 Gun Repair Kit: 54-4278 Full size lightweight spray gun Body: Drop-forged anodized aluminum Weight: 20.1 oz. Air Inlet: 1/4 NPS (M) Fluid Inlet: 3/8 NPS (M) Fluid Passages: Stainless Steel Feed Type: Pressure/Siphon Feed Part Sheet: 2463 Gun Repair Kit: 54-3605 The M1-G HVLP gravity feed spray gun not only complies with all air quality regulations, but also atomizes and spray as quickly as a conventional air spray gun. Body: Drop-forged aluminum Weight: 21.9 oz. Air Inlet: 1/4 NPS (M) Feed Type: Gravity Part Sheet: 2650 Gun Repair Kit: 54-4367 The MACH 1A Automatic offers total control of atomizing air pressure, side port air, fluid flow and spray patterns in production settings which require automatic equipment. The MACH 1AR Automatic is ideal for application where visual indication of fluid needle location is essential. It is pneumatically activated for application in a variety of automated spray systems. Cub SLG and Cub SL Touch-Up Guns The Cub SLG (gravity feed) and the Cub SL (siphon/pressure) are the finest touch-up and specialty HVLP coating guns. Cub SLG Body: Drop-forged anodized aluminum Weight: 15.2 oz. Air Inlet: 1/4 NPS (M) Feed Type: Gravity Part Sheet: 2735 Gun Repair Kit: 54-4478 Cub SL Body: Drop-forged anodized aluminum Weight: 12.3 oz. Air Inlet: 1/4 NPS (M) Fluid Inlet: 1/4 NPS (M) Fluid Passage: Stainless Steel Feed Type: Pressure/Siphon Feed Part Sheet: 2734 Gun Repair Kit: 54-4478 42

Conventional Spray Guns Spray Guns-Accessories 95 Gun High production spray gun. Body: Drop-forged anodized aluminum Weight: 27 oz. Air Inlet: 1/4 NPS (M) Fluid Inlet: 3/8 NPS (M) Fluid Passages: Stainless Steel Feed Type: Pressure/Siphon Feed Part Sheet: 2625 Gun Repair Kit: 54-3577 2001 Gun Compact, lightweight and well balanced Body: Drop-forged anodized aluminum Weight: 24 oz. Air Inlet: 1/4 NPS (M) Fluid Inlet: 3/8 NPS (M) Fluid Passages: Brass/Electoless nickel plated Feed Type: Pressure/Siphon Feed Part Sheet: 2316 Gun Repair Kit: 6-229 Five Easy Ways to Order from Fluid-Air Products Inc. CALL Toll-Free 800-365-7565 to order MAIL your order 12834 Gravois Rd. St. Louis, MO 63127 FAX your order 314-729-7099 E-MAIL your order info@fluidair.com WEBSITE Visit our site www.fluidair.com and link to www.gsa.gov for on-line ordering 43

Additional Spray Guns 95A Automatic Guns Mode1 190 - Air Blow Gun Conventional style air spray gun that is pneumatically activated for applications with reciprocating, rotary, spindle machines, and in stationary spray gun set-ups Body: Drop-forged anodized aluminum Weight: 20.5 oz. Cylinder Air Inlet: 1/4 NPS (M) Cylinder Air Pressure: 40 PSI Min./100 PSI Max. Atomization Air: 1/4 NPS (M) Fluid Inlet: 3/8 NPS (M) Fluid Passages: Stainless Steel Fluid Pressure: 100 PSI Max. Mounting Hole: 1/2 Part Sheet: 2641 Gun Repair Kit:: 54-3579 Model 95 AV Same features as Model 95A Spray Gun, but a tungsten carbide fluid nozzle and needle are used. For use with abrasive fluids. Model 95AR Same features as Model 95A Spray Gun, but has ratchet type adjustable needle valve control. Recommended for installations requiring numerous fluid control adjustments. Model 7E2 - Heavy Duty Gun Designed for continuous spraying of heavy bodied fluids. Drop-forged aluminum body. Replaceable plated drop-forged brass head. Adjustable floating fluid needle valve. Stainless steel air valve cartridge. Trigger has hardened steel wear plate. Adjustable spray pattern. Air Inlet: 1/4 NPS (M) Fluid Inlet: 1/2 NPS (M) Weight: 1 lb. 14 oz. Part Sheet: 2670 Airless 1 Heavy duty professional spray gun for applying various maintenance and decorative finishes. This lightweight, aluminum-bodied, drop-forged, spray gun features a stainless steel head and fluid passages, ball-type fluid valve, removable valve assembly, tungsten carbide seat, and built-in diffuser. A large rest pad at the back of the spray gun gives excellent operator comfort, in-the-hand support and balance. The thumb-operated safety trigger lock permits one hand locking, unlocking, and triggering. A tip guard is included for added safety. Spray tip not included. Maximum operating pressure is 6000 PSI. Part Sheet: 2340 Model 140B - Heavy Duty Gun Use for dusting, drying, removing chips, etc. Pistol grip style with aluminum diecast body. Nozzle number 60-40 (complies with paragraph 50-204 Walsh-Healy Alt and OSHA where air inlet does not exceed 100 PSI) with 1/16 orifice is standard. Optional 5 1/2 extension (60-41) available. 1/4 NPT (m) air inlet. Air consumption 3 1/2 CFM at 50 PSI. Part Sheet: 1108 Use for spraying solvents to clean engines and other machinery. Brass body. Ten inch nozzle/tube length. Has flexible tubing with hose clamp for siphoning solvent from container. Requires 14 CFM air at 50 PSI. 1/4 NPS (m) air inlet. Part Sheet: 1191 44

Additional Spray Guns (cont ) AA4000 Air Assisted Airlesss HVLP The unique tip and air cap design of the new Binks AA 4000 Air Assisted Airless HVLP Spray Gun allows operators to use lower fluid and air pressure than the competition to achieve an exceptionally fine finish. Maximim Fluid Pressure: 4000 PSI / 275 bar Maximum Air Pressure: 100 PSI / 6.8 bar Body: Forged aluminum Weight: 16 oz. Air Inlet: 1/8 NPT (M) x 1/4 NPS (M) Fluid Inlet: 1/4 NPS (M) Thread Fluid Passages: Stainless Steel Feed Type: Siphon Feed Part Sheet: 2776 AA1500 Air-Assisted Airless Spray Gun The unique tip and air cap design of this new spray gun allows operators to use lower fluid and air pressure than the competition to achieve a superior finish. Max. Fluid Pressure: 1500 psi/105 bar Max. Air Pressure: 100 psi/6.8 bar Gun Body: Forged Aluminum Fluid Path: Stainless Steel Fluid Shut Off Type: Stainless Steel Ball Standard UHMW Seat or Optional Tungsten Carbide Fluid Inlet Size: 1/4 NPS (m) Thread Air Inlet Size: 1/8 NPT (m) x 3/8 O.D. Push-In - Tube Fitting or D.M. Nipple Gun Weight: 16 oz./500 g Wren Airbrush Single action style. Air and fluid are delivered simultaneously. Wren Outfits Set No. 1 Includes airbrush, 1/2 fl. oz. color bottle 59-10022 C Airbrush Set No. 2 Includes airbrush, 1/4, 1/2 and 2 fl. oz. color bottle assemblies, 6 lightweight vinyl hose with connections and case. 59-10006 B Airbrush Airless 1 Spray Gun The Binks Airless 1 spray gun is a heavy-duty professional spray gun. Short, two finger trigger and low pull effort give a natural feel. A thumb operated safety trigger lock permits one hand locking and unlocking. Body: Drop-Forged Anodized Aluminum Weight: 27 Ounces Air Inlet: N/A Fluid Inlet: 1/4 NPS (M) Fluid Passage: Stainless Steel Feed Type: High Pressure - 6000 psi max. working Part Sheet: 2340 Gun Repair Kit: 6-236 Accessories Enhance the versatility of your Airless 1 Gun with Binks service-proven accessories. Twist-Tip Nozzle Cleaner Light-weight, stainless steel, Twist-tip assembly makes nozzle cleaning easy. Adjust-a-Fan Spray patterns from 4 to 22 inches wide. Nozzle Extensions Attache to airless guns for access to hard-to-reach areas. Airless Gun Swivel 72-780 1/4 NPS (m) x 1/4 NPS (f) Swivel Nut. Adjust-a-Fan Orifice Range Model No. Material to be sprayed (inches) 54-3280 Lacquers and Stains.007 to.019 54-3285 Latex and Enamels.011 to.026 54-3290 High Builds.017 to.035 54-3295 Extremely Heavy.021 to.054 Features include: Single acting style; simple to operate; easy to maintain; versatile Wren Outfit includes: Airbrush, 1/4, 1/2 and 2 fluid oz. color bottle assemblies and 59-60 (6 ft.) of lightweight vinyl hose with connections, packed in an attractive, clear plastic case 45

Airless Twist Tips State of the art twist tip assemblies to fit all brands of airless guns. Binks twist tip assemblies can also be used as direct replacements for the most popular brans of airless twist tips on the market. Binks twist tips meet all the needs of residential, commercial and industrial painting contractors. High quality tungsten allows for non-distorted spray patterns and high paint volume output before tip replacement is necessary. The chart at below reflects the most common tips for the professional painting industry. Surface Coating Fan Width Orifice Size (in inches).009.011.013.015.017.019.021.023 Wood Interior Stain, Sanding 6 309 311 313 315 - - - - Cabinets, Paneling Sealer, Lacquer 8 - - 413 - - - - - Varnish, Shellac 10 - - - - - - - - Enamels 12 - - - - - - - - Interior Walls Latex, Vinyl 6 - - 513 - - - - - Ceilings, Drywall Acrylic 8 - - - 415 417 419 - - Plaster 10 - - - 515 517 519 - - 12 - - - 615 617 619 Overhang Primers, 6 - - - 315 - - - - Enamels 8 - - - 415 417 10 - - - 515 517 - - - 12 - - - - - 619 - - Masonry Block Vinyl, Acrylic 6 - - - - - - - - Stucco, Concrete Latex, Oil Base 8 - - - - 417 - - - Alkyds 10 - - - 517 519 521 12 - - - - - - 621 - Wood Exterior Exterior, Stains 6 - - - - - - - - Shingle Siding, Latex, Vinyl 8 - - - - - - - - Shiplap Acrylic 10 - - - - 517 519 521 12 - - - - - - 621 Open Joist MIL White 6 - - - - - - - - Ceiling Areas HI Build 8 - - - - - - - - 10 - - - - - 519 - - 12 - - - - - - 521 523 BASE RETAINERS Assembly 454-3 454-5 454-6 Number 3/4-20(B) 7/8-14(G) 11/16-16(F) Binks Binks, Graco, AMSpray, Spray Titan, Wagner Tech, Wagner Ordering: For twist tips add the prefix 454-to size tip selected. For example, if you select 517, order as 454-517. Flat tips also available to order add 9-as a prefix. For example, if you select 413, order as 9-413. Airless Paint Spray Hose Airless Hose Size 50 FT. Bulk Package (100 Units 71-3531) Connector 1/4 71-3531 72-691 1/4 NPS Size 30 Whip Connector 3/16 71-8360 Assembly Only 1/4 NPS (F) x 1/4 NPS (M) Hose I.D. 1/4 Connection Thread: 1/4 NPS (f) Hose Connection: Swivel both ends Spring Guards: Both ends Static conducting Polyurethane cover Nylon inner tube Reinforcement: Braided textile yarn Operating Temp: (0 o F to + 200 o F) Min. Bend Radius: 2.5 In. Working Pressure: 3,300 psi Burst Pressure: 13,200 psi 46

Spray Gun Extensions Spray Guns-Accessories CLEARANCE MODEL DIAMETER NOZZLE SET-UP OPTIONAL LENGTHS FOR GUN PART SHEET (INCHES) (INCHES) MODEL REFERENCE EA 1 3/4 Std. External or Internal Mix 9, 15, 24, 36 2001 1368 95, 95A 2659, 2660 EB 3 Std. External or Internal Mix 6, 12, 18, 24 2001 1370 95, 95A 2659, 2660 EN 2 1/2 Std. External or Internal Mix 6, 12, 18, 24 2001 1372 36, 48, 60, 72, 84 95, 95A 2659, 2660 C 3/4 Circular (360 o ) 6, 9, 12, 15, 18, 24, 2001 1367, 2082 HC 90 o 30, 36, 48, 60, 72, 84 95, 95A 2659, 2660 SC 3/8 Circular (360 o ) 9, 12, 18, 27 2001 1328 33, 39, 51, 63, 75, 87 95, 95A 2659, 2660 52-1382 1 3/8 Special for Pipe Interior 1/4 in. Pipe not included Gun not Circular 360 o required High volume material flow Five Easy Ways to Order from Fluid-Air Products Inc. CALL Toll-Free 800-365-7565 to order MAIL your order 12834 Gravois Rd. St. Louis, MO 63127 FAX your order 314-729-7099 E-MAIL your order info@fluidair.com WEBSITE Visit our site www.fluidair.com and link to www.gsa.gov for on-line ordering 47

Spray Gun Cups Siphon Cups Pressure Cups Steadi-Grip 2 Cups Model 80-350 SG-2 (Steadi-Grip 2) Two Quart Pressure Cup Part Sheet: 2658 Model 81-575 One Quart Standard Part Sheet: 2378 EZ2 Solvent Saver Cup Cup features exclusive non-stick coating inside and out that wipes clean in seconds. Fits Spray Gun Models 95, 2001, and the MACH 1 Series of handguns. Model 81-375 One Quart Drip Proof Model 80-351 SG-2 (Steadi-Grip 2) Two Quart Pressure Agit Cup Part Sheet: 2658 Model 81-350 One-Quart DripProof clamp type with extra vent tube. Weight 16 ozs. 3/8 NPS (f) Part Sheet: 2250 Model 80-228 Two Quart Steadi-Grip with handle. Weight: 3.5 lbs. Part Sheet: 1619 Model 80-270 Fifty ounce stainless steel pressure cup Model 80-300 One Quart stainless steel pressure cup and 15 PSI regulator Model 80-210 One Quart. Furnished with pressure regulator and gauge 50 PSI max. Shipping weight 3 lbs. Part sheet: 1149 Model 81-540 Eight Ounce clamp type. Shipping Weight 8 oz. 1/4 NPS (F) Part Sheet: 1261 72-55 Adapter for 3/8 NPS (f) connection to spray gun Model 81-543 (not shown) Stainless steel eight ounce 3/8 NPS (f) outlet Part Sheet: 2679 Model 81-550 One Quart clamp-type. Shipping weight 16 ozs, 3/8 NPS (f) Part Sheet: 2250 Model 82-361 (not shown) One Quart stainless steel Accessories for Steadi-Grip 2 80-355 Disposable liner for 80-350 and 80-351 80-356 Qty. pack of 12 disposable liners for 80-350 and 80-351 80-392 Thiokol gasket for 80-350 and 80-351 48

PT ASME Code Tanks New-Economical ASME certification makes the Binks PT Series the only code PT tanks available in the workplace that meet OSHA regulations for using flammable and combustible materials. Binks new stainless and zinc ASME certified PT Series Tanks are economical and designed for use with waterborne and flammable materials that can be applied at less than 80 PSI. All PT Series tanks feature a 2.8 gallon capacity and low profile tank design which accepts U.S. and Canadian one-gallon pails. Zinc Plated for Solvent-Based Coatings Ideal for solvent-based coatings. Optional disposable tank liner. Zinc plated lid and all wetted parts in lid assembly including: fluid tube, lid bushing, outlet elbow and fitting, and agitator shaft. Zinc plated tank shell. Zinc Plated Lid and Tank Shell Zinc Plated Throughout, including Lid, Wetted Parts and Tank Shell AIR FLUID UP TO 2.8 GAL REGULATION AGITATION 83C Single Reg No Agitation 83C-210 Double Reg No Agitation 83C-220 Single Reg Std. Agitation(D) 83C-211 Double Reg Std. Agitation(D) 83C-221 Specifications Maximum Working Pressure... 80 PSI Fluid Outlet... 3/8 NPS Air Inlet... 1/4 NPS Stainless Steel and Zinc for Waterborne Coatings Ideal for waterborne coatings when used with a disposable tank liner. 300 grade stainless steel lid and all wetted parts in lid assembly including: fluid tube, lid bushing, outlet elbow and fitting, and agitator shaft. Zinc plated tank shell. Stainless Steel Lid and Zinc Plated Tank Shell Stainless steel lid, including all wetted parts; tank shell is zinc plated AIR FLUID UP TO 2.8 GAL REGULATION AGITATION 83C Single Reg No Agitation 83Z-210 Double Reg No Agitation 83Z-220 Single Reg Std. Agitation(D) 83Z-211 Double Reg Std. Agitation(D) 83Z-221 Binks Disposable Tank Liners For 83C and 83Z Binks tanks use either the 2.8 gallon tank liner PT-78-K10, quantity of 10 liners (1 bag of 10) or use the 2.8 gallon tank liner PT-78-K60, quantity of 60 liners. 49

All stainless steel tanks and lids are precison crafted of heavy gauge 304 stainless and are electropolished. All models are equipped with a bottom outlet plug. Additionally, these tanks are fitted with 100% stainless steel non-corrosive and non-corroding wetted parts. Binks stainless steel pressure tanks are designed and built to prevent corrosion-contamination, an inherent problem with waterborne coatings. For maximum cleanliness, use with Binks disposable tank liners. Binks 11.8 gallon tanks accept standard and imperial 5-gallon shipping pails. 2.8-gallon tanks accept 1-gallon pails Stainless Steel Tanks Your Best Long-Term Value Binks Stainless Steel Pressure Tanks are suitable for virtually all fluids and solvents. They are ASME certified and permanently labeled for 110 PSIG maximum working pressure. Tanks and lids are constructed of heavy gauge 304 stainless steel and are electropolished. All models are equipped with top outlet and bottom outlet plug, which can be adapted for bottom outlet Additionally, these tanks are fitted with 100% stainless steel non-corrosive and non-corroding wetted parts Specifications Maximum Working Pressure... 110 PSI Fluid Outlet, Top... 3/8 NPS Fluid Oulet Plug, Bottom... 1 NPT Air Inlet... 1/4 NPS Ideal for Waterborne Coatings Binks Stainless Steel pressure tanks are designed to prevent corrosioncontamination, an inherent problem with waterborne coatings. These tanks are all stainless steel, including fittings, and should be used with a Binks disposable liner for maximum cleanliness. Material handling components such as fluid regulators, filters and Stainless Steel Bottom outlet plug and opening in skirt standard agitators should also be of stainless steel. We also recommend you use hose and tubing connections/fittings made of stainless steel, nylon or brass. Other Considerations Waterborne coatings are shear sensitive to being stirred and pumped. Stirring and pumping can degrade some waterborne coatings. Binks pumps, however, are designed for extremely low shear characteristics. A Binks oscillating agitator is recommended for keeping pigment in suspension without degrading the material. Binks fluid regulators and filters are also recommended for their minimal low shear characteristics. Bottom Outlet Conversion Kits These fittings allow a standard top outlet tank to feed from the bottom by removing the plug in the bottom port. Available in stainless steel only. TANKS STAINLESS STEEL CAPACITY PART NO. SHIP WT. 2.8 GAL QMS-435 3 LBS. 11.8 GAL QMS-443 4 LBS. 19.8 GAL QMS-443 4 LBS. SMALL TANK MEDIUM TANK LARGE TANK AIR FLUID UP TO 2.8 GALLONS UP TO 11.8 GALLONS* UP TO 19.8 GALLONS REGULATORS AGITATION 83S 83S 83S Single Reg No Agitation 83S-210 83S-1010 83S-1510 Double Reg No Agitation 83S-220 83S-1020 83S-1520 Single Reg Std. Agitation 83S-211 (D) 83S-1013 (I) 83S-1513 Double Reg Std. Agitation 83S-221 (D) 83S-1023 (I) 83S-1523 Single Reg Opt. Agitation 83S-213 (I) 83S-1016 (R) 83S-1516 50 When combined with the use of disposable liners, there is no more economical way to run a paint operation for most applications. For 83S-200 Binks tanks use either the 2.8 gallon tank liner PT- 78-K10, quantity of 10 liners (1 bag of 10) or use the 2.8 gallon tank liner PT-78-K60, quantity of 60 liners. For 83S-1000 Binks tanks use the 11.8 gallon tank liner PTL-412-K8, quantity of 8 liners. For 83S-1500 Binks tanks use the 19.8 gallon tank liner PTL-415-K10, quantity of 10 liners. (D) - Direct Drive Agitator: Uses direct mount air mount and air adjusting valve. (I) - Indirect Drive Agitator: Uses Motor coupled to gearbox for higher torque at lower speeds. (R) - Reciprocating Agitator: Self-Reversing Air Motor for efficient mixing and reducing cavitation. * - Binks 11.8 gallon tanks accept standard and imperial 5-gallon shipping pails. NOTE: The air regulator(s) and gauge(s) are shipped inside the tank to prevent damage in shipping.

Galvanized Tanks Ideal for Most Applications Galvanized steel tanks are primarily used with non-corrosive materials. Constructed with a heavy pressed steel lid and forged steel clamps, galvanized tanks are equipped with top outlet and bottom outlet plug, which can be adapted for bottom outlet. The bottom outlet is recommended for heavy, viscous materials such as emulsified asphalts, cut-back asphalts, rubber compounds, etc. Specifications Maximum Working Pressure... 110 PSI Fluid Outlet, Top... 3/8 NPS Fluid Oulet Plug, Bottom... 1 NPT Air Inlet... 1/4 NPS Spray Guns-Accessories Bottom Outlet Conversion Kits These fittings allow a standard top outlet tank to feed from the bottom by removing the plug in the bottom port. Available in stainless steel only. TANKS STAINLESS STEEL CAPACITY PART NO. SHIP WT. 2.8 GAL QMS-435 3 LBS. 11.8 GAL QMS-443 4 LBS. 19.8 GAL QMS-443 4 LBS. Binks galvanized tanks are built to the highest quality standards. Our team of experts - engineers, designers, technicians and customer service professionals - is constantly working to bring you the quality, efficiency, performance and value you expect from one of the world s most recognized spray finishing brands. Binks galvanized tanks are primarily used with non-corrosive materials. Constructed with a heavy pressed steel lid and forged steel clamps, galvanized tanks have ports for both bottom and top fluid outlets. All galvanized tank models are ASME certified for working pressure. Lids disassembled easily-no special tools are required-and all models are easy to service and clean. Galvanized Steel Bottom outlet plug and opening in skirt standard SMALL TANK MEDIUM TANK LARGE TANK AIR FLUID UP TO 2.8 GALLONS UP TO 11.8 GALLONS* UP TO 19.8 GALLONS REGULATORS AGITATION 83G 83G 83G Single Reg No Agitation 83G-210 83G-1010 83G-1510 Double Reg No Agitation 83G-220 83G-1020 83G-1520 Single Reg Std. Agitation 83G-211 (D) 83G-1013 (I) 83G-1513 Double Reg Std. Agitation 83G-221 (D) 83G-1023 (I) 83G-1523 Single Reg Opt. Agitation 83G-213 (I) 83G-1016 (R) 83G-1516 When combined with the use of disposable liners, there is no more economical way to run a paint operation for most applications. For 83G-200 Binks tanks use either the 2.8 gallon tank liner PT- 78-K10, quantity of 10 liners (1 bag of 10) or use the 2.8 gallon tank liner PT-78-K60, quantity of 60 liners. For 83G-1000 Binks tanks use the 11.8 gallon tank liner PTL-412-K8, quantity of 8 liners. For 83G-1500 Binks tanks use the 19.8 gallon tank liner PTL-415-K10, quantity of 10 liners. (D) - Direct Drive Agitator: Uses direct mount air mount and air adjusting valve. (I) - Indirect Drive Agitator: Uses Motor coupled to gearbox for higher torque at lower speeds. (R) - Reciprocating Agitator: Self-Reversing Air Motor for efficient mixing and reducing cavitation. * - Binks 11.8 gallon tanks accept standard and imperial 5-gallon shipping pails. NOTE: The air regulator(s) and gauge(s) are shipped inside the tank to prevent damage in shipping. 51

Indirect Air Motor Drive Standard duty, smooth running with gear reducer, 1/4 hp, 15:1 ratio, 20 to 120 RPM. Includes throttling valve, fittings, and hose for connection to air supply on tank lid. Air consumption: Approximately 6 CFM@50 RPM. Model QS-5012. For 2.8, 11.8 and 19.8 gallon tanks only. Agitator Drives Standard Model 31-116 Air Motor Drive Unit with gear reducer: 1/2 H.P., 20:1 Ratio, 15 to 90 RPM output. Shipping weight 20 lbs. Part Sheet 1214. For 30 and 60 gallon tanks only. Model 31-237 Oscillating Air Motor. 1-70 oscillations/min. 400 inch lbs. Torque at 80 psi. Shipping weight 15 lbs. Part Sheet 2014. For 30 & 60 gallon tanks only. Heavy Duty Model 83-2476 Tank Accessories Air Motor Drive Unit with gear reducer. 1 H.P., 30:1 Ratio, 15 to 50 RPM output. Shipping weight 20 lbs. Part Sheet 1622. For 30 & 60 gallon tanks only. Direct Drive Agitator Air-powered direct drive agitator assembly with 1/4 hp air motor and a three-bladed propeller to keep materials mixed in suspension, even high solids. Use on two gallon models. Must order air motor and shaft separately. 83Z Series Stainless Steel Model PT-427 - air motor Model PT-419 - shaft assembly 83C Series Zinc Plated Model PT-418 - air motor Model PT-428 - shaft assembly 83S and 83G Series Refer to part sheets on tank Air Regulator Assembly Kits Model QMS-436: One gauge, one regulator. Converts single regulation to dual. Model QMS-4006: One gauge, one regulator. Regulates and indicates tank pressure. Model QMS-4007: Two gauges, two regulators. Controls tank pressure and atomization air pressure to gun. Model HAR-511: Regulator only (for fluid pressure). Model HAR-507: Second regulator for tanks with one regulator. Model GA-288: Gauge only, range 0-160 psi (for fluid). Model GA-333: Gauge only, range 0-100 psi (for air). Premium Spray Finishing Air Hose Assemblies and Connections SIZES LENGTH HOSE ASSEMBLY BULK HOSE CONNECTION TYPE OF CONNECTION I.D. OF HOSE PART NO. NUMBER THREAD SIZE CONNECTION PART NO. 5/16 25 ft. 71-1205 71-131 1/4 NPS (F) three piece reusable 72-1317 5/16 50 ft. 71-1206 71-131 1/4 NPS (F) three piece reusable 72-1317 3/8 25 ft. 71-1355 71-132 1/4 NPS (F) three piece reusable 72-1325 3/8 50 ft. 71-1356 71-132 1/4 NPS (F) three piece reusable 72-1325 Fluid All TM Fluid Hose Assemblies and Connections SIZES LENGTH HOSE ASSEMBLY BULK HOSE CONNECTION TYPE OF CONNECTION I.D. OF HOSE PART NO. NUMBER THREAD SIZE CONNECTION PART NO. 3/8 25 ft. 71-3303 71-282 3/8 NPS (F) three piece reusable 72-1328 3/8 50 ft. 71-3304 71-282 3/8 NPS (F) three piece reusable 72-1328 Lid Gaskets GASKET 2.8 GAL 11.8 GAL. 19.8 GAL 2.8 GAL. 30 GAL. 60 GAL. MATERIAL GALV. OR SS GALV. OR S.S. GALV. OR S.S. P.T. TANK GALVANIZED GALVANIZED PART NO. PART NO. PART NO. PART NO. PART NO. PART NO. PART NO. Santoprene QMS-80-1 QM-1458-1 QM-1458-1 PT33-1 - Thiokol - - - - 83-2120 83-2122 Rubber - - - - 83-2121 83-2123 Binks now offers Santoprene lid gasket in place of the standard Thiokol gasket. Injection molded of new hi-tech materials, Santoprene is highly chemical resistant. 52

Pumps Spray Guns-Accessories Pogo Pump Infinity Pogo Pump Specifications & Construction Lower Pump Material 316 SS Pump Rod Material 316 SS Cylinder Material Stainless Steel Packing Material UHMW Polyethylene Motor Diameter 2 Stroke 6 Air Inlet 1/4 NPT (f) Material Inlet Immersed (no Threads) Material Outlet 1/2 NPT (f) Weight 19 lbs. (8.6 kgs.) Weight (stub) 16 lbs. (7.3 kgs.) Part Numbers Air Control 41-11430 Bare Pump 41-11431 Air Motor 41-11432 Air Motor Repair Kit 41-11433 Fluid Section 41-11434 Stub Fluid Section 41-11435 Fluid Section Repair Kit 41-11436 Stub Bare Pump 41-11437 Gemini Diaphragm Pump Technical Specifications Gemini 1/2 Series Bare Pump Model Number:135-100 135-150 Body Construction: SS Filled Acetal Ground Wire: 135-74 Free GPM: 135-100 (7 GPM) 135-150 (13 GPM) Principal Use: Multi Gun Supply/ Multi Gun Supply or Fluid Transfer Part Sheet: 135-100-2498 135-150-2561 Specifications (Stainless) Lower Pump Material 316 SS Plunger Material 316 SS Cylinder Material Stainless Steel Packing Set UHMW Polyethylene Max. 120 o F Fluid Inlet Temp. Max. 180 o F Fluid Inlet Temp. Weight Drum 19 lbs. (8.6 kgs) Stub 16 lbs. (7.2 kgs) Part Number (Both SS Pumps) Air Motor 873008 Air Motor Repair Kit 861034 Lower Motor Assembly (821300) 873009 SS Stub 873200 Lower Pump Repair Kit (same) 861089 Optional Teflon Packing 861038 Specifications (Carbon Steel) Lower Pump Material Carbon Steel Plunger Material Carbon Steel (chrome plated) Cylinder Material Carbon Steel Packing Set UHMW Polyethylene Max. 120 o Fluid Inlet Temp. Max. 180 o F Fluid Inlet Temp. Optional Packing Weight 12 lbs. (5.4 kgs) Part Numbers (Carbon Steel) Air Motor 873008 Air Motor Repair Kit 861034 Lower Pump Assembly 873010 Lower Pump Repair Kit 861035 Optional Teflon Packing 861036 Recommended Accessories Air Controls 41-15931 Muffler 873191 Wall Mount 873184 1:1 Drum Pump Carbon Steel 812306 53

Pumps (cont ) Comet Hi-Vol (2.5:1) Pump Unit Model Number: 41-11495 Includes... 41-3311 Gear Drive Agitator 41-11459 Air Control 41-2414 Drum Cover Assembly 41-5024 Comet Hi-Vol Pump Typical Applications: This complete package is designed for open top 55 gallon drums to be used on a multi-gun recirculating system. For short distances, add fluid hose, fluid regulator, and spray gun. For long systems, add the appropriate drops, fluid regulators and spray guns. Infinity 1/2 Diaphragm Pump Pump 818830 (SS), #818831 (GND ACT) & #818833 (Polypropylene) 1/2 Diaphragms Specifications Air Motor: Unbalanced Wetted Pump Material: See Chart Diaphragm Material: Teflon Seat: 316 Stainless Steel Balls (standard): 316 Stainless Steel Weight: Stainless Steel Groundable Acetal Polypropylene 14.6 lbs (6.6 kgs) 8.8 lbs (4 kgs) 7.2 lbs. (3.3 kgs) Part Numbers Air Motor Repair Kit 862004 Diaphragm Repair Kit Stainless Steel 862040 Groundable Acetal 862040 Polypropylene 862040 Ball & Seat Repair Kit Stainless Steel (Ball/Seat) 862045 Teflon (Ball) SS (Seat) 862046 Recommended Accessories Air Control 849303 Wall Mount 873116 Siphon 5 Hose with Stainer 5 Gallon 874504 Construction Part # Body Seat Ball Diaphragm 818830 SS SS SS Teflon 818831 Groundable Acetal SS SS Teflon 818833 Polyproylene SS SS Teflon Infinity 1 Diaphragm Pump Pump 818822 (SS) Specifications Air Motor: Unbalanced Wetted Pump Material: See Chart Diaphragm Material: Teflon Seat: Stainless Steel Balls (standard): Stainless Steel Weight: Aluminum: 19 lbs. (8.62 kgs) Stainless Steel: 36 lbs. (16.33 kgs) Part Numbers Air Motor Repair Kit 862003 Diaphragm Repair Kit 862020 Ball & Seat Repair Kit Stainless Steel (Ball/Seat) 862025 Teflon (Ball) SS (Seat) 862026 Recommended Accessories Air Control 849303 Wall Mount 873115 Siphon Hose 5 Hose with Stainer 5 Gallon 874500 55 Gallon 874501 Construction Part # Body Seat Ball Diaphragm 818820 Aluminum SS SS Teflon 818822 SS SS SS Teflon 54

Pumps (cont ) Spray Guns-Accessories Infinity Hi-Volume 3:1 Diaphragm Pump Pump 818800 - Ratio 3:1 Specifications Air Motor: Unbalanced Wetted Pump Material: Stainless Steel Diaphragm Material: Teflon Seat: Stainless Steel Balls (standard): Stainless Steel Weight: Stainless Steel 95 lbs. (43 kgs) Part Numbers Air Motor Repair Kit 862001 Diaphragm Repair Kit 862000 Ball & Seat Repair Kit Stainless Steel (Ball/Seat) 862025 Recommended Accessories Air Control 849303 Wall Mount 873134 Infinity Hi-Volume 1-1/2 Diaphragm Pump Pump 818810-1 1/2 Diaphragm Specifications Wetted Pump Material: Stainless Steel Diaphragm Material: Teflon Seat: Stainless Steel Balls (standard): Teflon Weight Stainless Steel: 84 lbs. (38.1 kgs) Air Motor Repair Kit: 862003 Part Numbers Diaphragm Repair Kit: 862010 Ball & Seat Repair Kit Teflon (Ball) SS (Seat) 862015 Recommended Accessories Air Control 849303 Wall Mount 873135 55

Pump Packages Infinity Diaphragm Wall Mount Finishing Bung Mount Bunk Mount Packages include: Air Control, Mounting Plate, Mounting Hardware, and SS Siphon Tube with strainer and Fluid Regulator. Wall Mount Bulk Transfer These bulk transfer/high volume finishing pumps can efficiently transfer finishing coatings to a day tank. The 3:1 can supply large circulating systems. Both pumps are designed to handle heavy abrasive coatings. We offer 1/2 and 1 wall mount packages. All Packages include: Wall Mount Bracket, Fluid Regulator, 2 Air Controls, and Pneumatic Shut Off 1/2 Wall Mount Pump Packages Construction Part # Wetted Seat Ball Diaphragm 818150 SS SS SS Teflon 1/2 Bung Mount Pump Packages Construction Part # Wetted Seat Ball Diaphragm 818170 SS SS SS Teflon 818100 3:1 Diaphragm includes: Pump 818800 Wall Bracket 873134 Air Control 849303 Construction Part # Wetted Seat Ball Diaphragm 818100 SS SS SS Teflon 1 Wall Mount Pump Packages Construction Part # Wetted Seat Ball Diaphragm 818121 SS SS SS Teflon 818120 Alum SS SS Teflon Pail Mount Pail Mount Packages include: Fluid Regulator and 2 Air Controls. Pump mounted on cover. 1/2 Pail Mount Pump Packages Construction Part # Wetted Seat Ball Diaphragm 818160 Grounded SS SS Teflon Acetal 818110 1-1/2 Pump includes: Pump 818810 Wall Bracket 873135 Air Control 849303 Construction Part # Wetted Seat Ball Diaphragm 818110 SS SS SS Teflon 56

Pump Packages (cont ) Spray Guns-Accessories Infinity N Series Infinity N Series pumps are low cost, stainless steel pumps for light industrial air assist and airless applications. 812190 Package Includes Pump Wall Mount Bracket Pneumatic Shut Off Valve Air Assist and Airless Part Numbers Cart Mount Pkg. 812180 28:1 Ratio with.38 GPM @ 60 cycles Wall Mount Pkg. 812190 28:1 Ratio with.38 GPM @ 60 cycles Wall Mount Bracket 873116 Air Controls 849303 Accessories not included Siphon Hose - 5 foot hose with strainer 5 gallon 874504 812180 Package Includes Pump Cart Pneumatic Shut Off Valve 57

Pump Packages (cont ) Gemini 1/2 Diaphragm Pump Packages Gemini Pump Packages 1/2, Low Pulse - 100 PSI Package Bare Pump Wetted Ratio & GPM@ Mounting Air Suction Hose Agitator Prime Pulse/ Fluid Number Number Parts Size 60 CPM Regltrs w/bung Adapt. Valve Filter Reg. 818160 818831 acetal, Teflon 1:1, 1/2 NPT 1.2 pail 2 pail 0 0 0 1 818171 818834 SS, Teflon 1:1, 1/2 NPT 1.2 55 bung 1 NR 0 0 0 1 818200 818831 acetal, Teflon 1:1, 1/2 NPT 1.2 pail 2 pail 0 1 1 0 818201 818831 acetal, Teflon 1:1, 1/2 NPT 1.2 pail 2 pail 843000 1 1 0 818210 818831 acetal, Teflon 1:1, 1/2 NPT 1.2 wall 2 55 gallon 0 1 1 0 818220 818831 acetal, Teflon 1:1, 1/2 NPT 1.2 55 drum cover 2 55 gallon 843001 1 1 0 818231 818831 acetal, Teflon 1:1, 1/2 NPT 1.2 55 bung 1 NR 0 0 0 0 818861 818834 SS, Teflon 1:1, 1/2 NPT 1.2 55 bung 0 NR 0 0 0 1 818871 818831 acetal, Teflon 1:1, 1/2 NPT 1.2 55 bung 0 NR 0 0 0 1 Gemini Pump Packages 1/2, Max. Flow - 100 PSI Package Bare Pump Wetted Ratio & GPM@ Mounting Air Suction Hose Agitator Prime Pulse/ Fluid Number Number Parts Size 60 CPM Regltrs. w/bung Adapt. Valve Filter Reg. 818150 818830 SS, Teflon 1:1, 1/2 NPT 2.4 wall 2 0 0 0 0 1 818170 818830 SS, Teflon 1:1, 1/2 NPT 2.4 55 bung 1 NR 0 0 0 1 818230 818836 acetal, Teflon 1:1, 1/2 NPT 2.4 55 bung 1 NR 0 0 0 0 818860 818830 SS, Teflon 1:1, 1/2 NPT 2.4 55 bung 0 NR 0 0 0 1 818870 818836 acetal, Teflon 1:1, 1/2 NPT 2.4 55 bung 0 NR 0 0 0 1 Recommended Not Shown 849303 873414 841010 84-320 Gemini 1/2 Low Pulse Spray Outfits MODEL #98-3022 SYSTEM COMPONENT LIST Item Part Description Qty. Part No. No. Sheet 1 7000-1204-4 Mach 1 SL Gun 1 2665 2 71-1205 Air Hose Ass y 1 --- 3 71-3303 Fluid Hose Ass y 1 --- 4 818160 Gemini Pump Pkg. 1 81816X MODEL #98-3023 SYSTEM COMPONENT LIST Item Part Description Qty. Part No. No. Sheet 1 6211-2800-7 2001 Gun 1 2316 2 71-1205 Air Hose Ass y 1 --- 3 71-3303 Fluid Hose Ass y 1 --- 4 818160 Gemini Pump Pkg 1 81816X MODEL #98-3024 SYSTEM COMPONENT LIST Item Part Description Qty. Part No. No. Sheet 1 7000-1204-4 Mach 1 SL Gun 1 2665 2 71-1205 Air Hose Ass y 1 --- 3 71-3303 Fluid Hose Ass y 1 --- 4 818210 Gemini Pump Pkg 1 81821X General Description This (5) gallon pail system is complete with Mach 1 SL Gun w/94 x 94P set-up, 1:1 Gemini 1/2 diaphragm pump w/air control and 25 ft. fluid and air hose assemblies General Description This (5) gallon pail system is complete with 2001 Gun w/63bss x 63 PB, 1:1 Gemini 1/2 diaphragm pump w/ air control and 25 ft. fluid and air hose assemblies General Description This 55 gallon, wall mounted system comes complete with Mach 1 SL Gun w/94 x 94P set-up, 1:1 Gemini 1/2 Low Pulse diaphragm pump, air control, 25 ft. air and fluid hose and 55 gallon siphon kit. 58

Pump Packages (cont ) Raptor Systems (Wall & Cart Mounted) Air Assisted Airless Outfits - 1800 PSI Spray Guns-Accessories Wall Mounted Outfit Model No. 98-3070 (UHMWPE) 98-3071 (Teflon TM ) Wall-mount outfit is a complete finishing system for stationary installations. The small profile fits easily in tight spaces. Shipping weight 21.5 lbs. (9.8 kg.) Raptor Systems Wall mounted outfit - with gun and hoses 5 gallon (UHMWPE) packings... 98-3070 5 gallon (Teflon TM ) packings... 98-3071 55 gallon (UHMW) packings... 98-3074 55 gallon (Teflon TM ) packings... 98-3075 Cart mounted outfit - with gun and hoses UHMWPE packings... 98-3072 Teflon TM packings... 98-3073 Wall mounted package - no gun or hoses UHMWPE packings... 812290 Teflon TM packings... 812291 Cart mounted outfit - no gun or hoses UHMWPE packings... 812280 Teflon TM packings... 812281 Raptor - Pump only UHMWPE packings... 812450 Teflon TM packings... 812451 Shipping Weight... 12.6 lbs (5.7 kg) Cart Mounted Outfit Model No. 98-3072 (UHMWPE) 98-3073 (Teflon TM ) Cart-mount outfit is a complete finishing system for mobile flexibility. This outfit includes pump, regulator, cart, gun filter, spray gun with tip and all standard hoses. Shipping weight 35.5 lbs. (16.1 kg.) Available Accessoires *Fluid Tip (included in outfits)... User Selects *3/16 Fluid Hose... 71-4995 1900 PSI (28 bar), 25, 1/4 NPS 25 Pneunatic Tubing Assembly... 71-4991 *Ground Wire Kit... 873067 *100 mesh gun filter;... 54-5010 Fluid Regulator 300-2000 PSI... 84-420 (4.4-30 bar) Pump Outlet Fluid Filter... 103-1241 Air Motor Repair Kit... 861030 Lower Pump Repair Kit UHMWPE... 861110 Teflon TM... 861111 Wet-Sol Plus 1 qt. Packing Lubricant 863009 System Assembly Sheet... 77-5199 Package Part Sheet... 81228X Pump Part Sheet... 81245X Air Motor Part Sheet... 842009 Fluid Section Part Sheet... 87111X * Included with outfits 59

Pump Packages (cont ) Vecter Spray Finishing Outfit 28:1 Air Assisted Airless Outfits - 2800 PSI Infinity Pump on Cart & Infinity Pump with Wall Bracket Outfit Features 5-year pump warranty on all nonwear parts Hydraulically-assisted fluid delivery combined with HVLP air supply Maximum fluid pressure - 2800 PSI Pump supplies.38 GPM @ 60 CPM to supply tip sizes.009 to.017 Drop forged aluminum gun body, stainless steel fluid passages, nozzle and needle Outfit Benefits Stainless steel gun and pump Achieves fine finish and high efficiency Lightweight and easy to handle; gives operators superior control while fighting fatigue Works with lacquers, enamels, stains, sealers, and top coats Can spray light to heavy viscosity materials Can spray air-assist or airless For wood and metal finishing Part Numbers Infinity Pump on Cart... 812180 Infinity Pump wit Wall Bracket... 812190 Air Motor Repair Kit... 861030 Lower Pump Repair Kit... 861040 Recommended Accessories Fluid Regulator 300-2000 PSI... 84-420 Fluid Regulator 100-900 PSI... 84-520 Pump Outlet Fluid Filter... 103-1241 Fluid Tip.009... 110-0908 (Included in Package).011... 110-1108.013... 110-1308.015... 110-1508.018... 110-1808 Air Cap... 93 HA 1/8 ErgoFlex Fluid Hose 5000 PSI, 25, 1/4 N.P.S.... 71-6840 3/16 ErgoFlex Fluid Hose 4000 PSI, 25, 1/4 N.P.S.... 71-6842 Double Male Nipple, S.S.... 72-791 1/8 Pneumatic Tubing Assembly 125 PSI, 25, 1/4 N.P.T.... 71-6860 Ground Wire... 873067 Part Number 98-3040 Cart-mounted outfit (optional hoses shown above) is a complete finishing package for mobile flexibility. This outfit included pump, air controls, cart, gun filter, spray gun with tip and all standard hoses. Shipping weight 45 lbs. Part Number 98-3042 Wall-mounted outfit (optional hoses shown above) is a complete finishing package for stationary applications. The small profile fits easily in tight spaces. 60

Pump Packages (cont ) Infinity Pogo Pump Pump #812300 (SS Drum), #812302 (CS Drum) #812304 (SS Stub) - Ratio 2:1-200 PSI Spray Guns-Accessories Performance Air Inlet Pressure....30-150 PSI (2-10.2 bar) Fluid Pressure Range... 60-300 PSI (4-20.4 bar) Max. Cycles/Min.... 120 Displacement Per Cycle 7.2 cu. in.... (117.9 cm 3 ) 3.9 oz.... (117.9 ml).03 gal... (.117 liter) Cycles per Gallon (Liter)... 32 (8.4) Flow @ 120 Cycles/Min.. 4.2 GPM (15.8 lpm) Materials of Construction 812302 Lower Pump Material... Carbon Steel Plunger Material...... Carbon Steel (Chrome Plated) Cylinder Material... Carbon Steel Packing Set... UHMW Plyethylene Max 120 o F Fluid Inlet Temp. Max 180 o F Fluid Inlet Temp. Optional Packing Weight... 12 lbs. (5.4 kgs.) Materials of Construction 812300 and 812304 Noise level @ 60 PSI... 77.8 db(a) Lower Pump Material... 316 Stnls. Steel Plunger Material... 316 Stnls. Steel Cylinder Material... Stainless Steel Packing Set... UHMW Polyethylene Max. 120 o F Fluid Inlet Temp. (Standard) Max. 180 o F Fluid Inlet Temp. (Optional) Weight Drum... 19 lbs. (8.6 kgs.) Stub... 16 lbs. (7.2 kgs.) Part Numbers for 812300 and 812304 (SS) Air Motor... 873008 Air Motor Repair Kit... 861034 Lower Pump Assembly (812300)... 873009 SS Stub (812304)... 873200 Lower Pump Repair Kit (same)... 861089 Part Number for 812302 (Carbon Steel) Air Motor... 873008 Air Motor Repair Kit... 861034 Lower Pump Assembly... 873010 Lower Pump Repair Kit... 861035 Optional Telfon Packing... 861036 Available Accessories Air Control... 41-15931 Muffler... 873191 Wall Mount or Open Drum Mount Bracket... 873184 Pogo Spray Finishing Outfit Model #98-3060 General Description Excellent for solvent based adhesives This (55) Gallon Bung System is complete with 2001 SS Gun w/66ss x 66SD-3 set up, 1:1 ratio supply pump with air control and 25 ft. fluid and air hose assemblies 61

Pump Packages (cont ) Infinity Two-Ball Pump Packages Wall Mount Package Includes Pump with UltraCoat TM Wall Mount Bracket Muffler Air Filter/Regulator Stainless Steel Material Filter Manual Fluid Pressure Relief Valve Needle Valve Accessories (Included) Wall Mount Bracket for 4-1/4 and 6 motors... 873115 for 8 motors... 873237 Mufflers for 4-1/4 and 6 air motors... 873158 for 8 air motors... 873190 Air Filter/Regulator (2)... 849303 SS Fluid Filter w/100 mesh element. 841006 Available Accessories* Siphon Kits 5 gallon... 874500 55 gallon... 874501 Siphon kits include 5 hose, SS fittings, tube and strainer *not included with packages Model - 1100 PSI 1-4, 11:1 Ratio, 3.77 GPM... 812115 Typical Applications 11:1- used in air assist airless and lowerrange airless systems with light to medium viscosity coatings. This pump can be used as a multi-gun supply pump in a circulating or a dead end system. Bare pump #812315 Model - 2200 PSI 1-4, 22:1 Ratio, 1.9 GPM... 812125 Typical Applications 22:1 - used in air assist airless and midrange airless systems with light to medium viscosity coatings. This pump can also be used in a circulating system or a dead end system. Bare pump #812325 Model - 2300 PSI 1-6, 23:1 Ratio, 3.77 GPM... 812135 Typical Applications 23:1 - used in air assist airless and midrange airless systems with light to medium viscosity coatings. This pump can be used as a multi-gun supply pump in a circulating or a dead end system. Bare pump #812335 Model - 4000 PSI 1-8, 40:1 Ratio, 3.77 GPM... 812265 Typical Applications 40:1 - used in high-pressure systems with light, medium or high viscosity coatings. Typically an airless pump, can also supply air assisted airless. This pump can also be used in multi-gun circulating or a dead end system. Bare pump #812415 Model - 4500 PSI 1-6, 45:1 Ratio, 1.9 GPM... 812155 Typical Applications 45:1 - used in high-pressure systems with light, medium or high viscosity coatings. Typically an airless pump, can also supply air assisted airless. This pump can also be used in a circulating system or a dead end system. Bare pump #812355 Model - 3000 PSI 1-4, 30:1 Ratio, 1.5 GPM... 812145 Typical Applications 30:1 - used in air assist airless and mid-high range airless systems with light, medium and high viscosity coatings. This pump can also be used in a circulating system or a dead end system. Bare pump #812345 62

Finishing Systems/Packages Spray Guns-Accessories HVLP Conversion Outfits Model 98-1261 - PD Pro Finish Outfit Consists Of... 94-90 P Mach 1 Gun 135-1058 2 h.p. Oiless Air Compressor 83Z-220 2.8 Gallon ASME PT Tank 71-1203 15 Air Hose Assembly (Compressor to Tank) 71-1205 25 Air Hose Assembly (Tank to Gun) 71-3383 25 Fluid Hose Assembly (Tank to Gun) Model 98-1121 A one-quart starter outfit without compressor. For touch-ups and small to medium jobs by contractors, cabinet makers, and wood finishers who have existing compressors (1.5 H.P. Minimum Req d) 98-1120 Mach 1 Conversion 1 Quart HVLP Outfit with 94 x 90P nozzle 71-1205 25 5/16 Air Hose Assembly 73-134 Air Regulator w/gauge Model 98-1127 Same as 98-1121 except with M1-G Gravity Spray Gun with stand Vecter Spray Finishing Outfit 812180 Infinity Pump on Cart 812190 Infinity Pump with Wall Bracket 861030 Air Motor Repair Kit 861040 Lower Pump Repair Kit 10-411.011 Fluid Tip (included in pkg.) Conventional Air Spray Outfits Model 98-1067 Binks Steadi-Grip outfit. External mix nozzles for enamels, primers, polyurethane. Includes standard 2001 gun with 63BSS-63PB, 5 ft. of air and fluid hose, air regulator valve and 80-228 pressure cup. Optional nozzles are available. HVLP Touch Up Outfits Model 98-1120 Outfit Consists of... 94-90P Mach 1 Gun 80-272 1 Quart Pressure Assisted Stainless Steel Cup Model 98-1121 Outfit Consists of... 98-1120 Mach 1 Gun 71-1205 25 Air Hose Assembly (hose not shown) 73-134 Air Regulator with Gauge 98-3072 Raptor Spray Finishing System Wall mounted unit complete with gun and hoses 98-3070 UHMWPE packings 98-3071 Teflon packings Cart mounted unit complete with gun and hoses 98-3072 UHMWPE packings 98-3073 Teflon packings Wall mounted unit - no gun or hoses 812290 UHMWPE packings 812291 Teflon packings Cart mounted unit - no gun or hoses 812280 UHMWPE packings 812281 Teflon packings Raptor - Pump Only 812-450 UHMWPE packings 812451 Teflon packings 12.6 lbs. Shipping Weight 63

Drum Covers and Agitators 55 Gallon Drum Cover 5 Gallon Pail Cover Drum Covers Part No. Container Description Shipping Wt. Lbs. 41-2182* 5 Carbon Steel Pail Cover for Comet 3C & 4B 5 41-2414** 55 Carbon Steel Drum Cover for Comet 3C & 4B, Hi-Vol 23 41-3205 5 Carbon Steel Pail Cover for 5 Gal. Agitator & Siphon Tube Only 6 31-124 55 Carbon Steel Drum Cover for 55 Gal. Agitator & Siphon Tube Only 24 * with mounting holes for: Pump, Air Control, Agitator and Filter ** For use with Hi-Vol. 41-11499 adapter required. Direct Drive Agitator w/cover Part 31-129 Direct Drive Agitator Direct Drive Agitator w/cover Part 31-133 Gear Reduced Drive Agitator w/cover Part 31-131 41-9000 Direct Drive Agitator Elevator Part #41-9000 For lifting 55 gallon cover-mounted pump units. Shipping Wt....68 lbs. Part Sheet Ref....1392 Gear Reduced Drive Agitator Direct Drive Agitator (only). 41-3304 Direct Drive Agitator w/cover... 31-129 Includes: 31-124 Cover & 41-3304 Agitator Container Size... 55 Gallon Motor Specifications Air Motor Model... Direct H.P.... 1/4 CFM... 4-8 Shaft Specifications Material... Stainless Steel Mount... Flange Diameter in. (mm)... 5/8 (190.5 mm) Max. Speed... 1000 RPM Propeller Specifications Number of Propellers... 2 Diameter (in.)... 5 1/8 Material... Stainless Steel Cover Material...Carbon Steel Part Sheet Ref.... 1390 Direct Drive Agitator (only). 41-3312 Direct Drive Agitator w/cover... 31-133 Includes: 41-3205 Cover & 41-3312 Agitator Container Size... 5 Gallon Motor Specifications Air Motor Model... Direct H.P.... 1/4 CFM... 4-8 Shaft Specifications Material... Stainless Steel Mount... Flange Diameter in. (mm)...3/8 (114.3 mm) Max. Speed... 1000 RPM Propeller Specifications Number of Propellers... 1 Diameter (in.)... 3 Material... Stainless Steel Cover Material... Carbon Steel Part Sheet Ref.... 1474 Agitator (only)... 41-3311 Agitator w/cover... 31-131 Includes: 31-124 Cover & 41-3311 Agitator Container Size... 55 Gallon Motor Specifications Air Motor Model... Gear Gear Ratio... 20:1 Reduction H.P... 1/4 CFM... 4-8 Shaft Specifications Material... Stainless Steel Mount... Flange Diameter in. (mm)...7/8 (266.7 mm) Speed Range... 15-90 RPM Propeller Specifications Number of Propellers... 2 Diameter (in.)... 14 1/2 Material... Stainless Steel Cover Material... Carbon Steel Part Sheet Ref.... 1657 64

Fluid Regulators Downstream Medium Flow Body/ Regulated Working Maximum Model Ball & Seat Pressure Range Pressure with Gauge Inlet Pressure Number (see code at bottom) PSI (bar) PSI (bar) PSI (bar) Low Pressure 845001 (with gauge) Spray Guns-Accessories 1/4 ports, medium pressure to 1 GPM (3.785 liters) 84-420 S/S, T/C 300-2000 3000 3000 84-520 S/S, T/C 100-900 1000 3500 3/8 ports, medium pressure to 3 GPM (11.4 liters) 845010 S/S, T/C 400-1250 (27.2-83) 3000 (204) 845011 S/S, T/C 1000-3000 (59-207) 6000 (408) Downstream High Flow Body/ Regulated Working Maximum Model Ball & Seat Pressure Range Pressure with Gauge Inlet Pressure Number (see code at bottom) PSI (bar) PSI (bar) PSI (bar) 3/8 ports, high pressure to 6 GPM (22.7 liters) 845001 S/S, T/C 100-800 (7-55) 1000 (69) 1250 (85) 845013 S/S, T/C 2000-5000 6000 Back Pressure Models Base Regulated Working Maximum Model Housing Seat Pressure Range Pressure with Gauge Inlet Pressure Number (see code at bottom) PSI (bar) PSI (bar) PSI (bar) 1/4 ports, medium pressure regulator 84-421 T/C 300-2000 3000 3500 84-521 T/C 100-900 1000 3500 3/8 ports, high-flow to 6 GPM (22.7 liters) 845000 S/S, T/C 0-200 (0-14) 200 (14) 200 (14) 845002 S/S, T/C 0-800 (0-14) 800 (55) 800 (55) 845012 S/S, T/C 1000-3000 3000 1/2 port, low shear to 1 GPM (3.78 liters) 84-601 S/S, S/S 0-200 (0-14) 200(14) 200(14) 84-420 84-421 84-520 84-521 Optional Gauges 873055 Rear Mount (3000 PSI) 101-3069 (3000 PSI) 84-491 (1000 PSI) 84-246 (200 PSI) High Pressure 845010 845011 (without gauge) 845000 845002 (with Gauge) 3/4 ports, high-flow to 11 GPM (41.6 liters) 84-404 S/S, S/S 10-140 150 150 Optional Gauge: 84-246 - 0-200 PSI Ga 1 1/4 ports, system-flow** to 18.5 GPM (701 liters) 845003 S/S, T/C 0-200 (0-14) 200(14) 200(14) Material codes T/C Tungsten Carbide S/S Stainless Steel 84-404 (without Gauge) **Flow rates tested in 55 CPS Material 65

HVLP Conversion Accessories HVLP Conversion Outfits (converts from HVLP to conventional airspray to electrostatic... all with simple optional accessories) Mix or match the following components to provide all the equipment contractors need. For maximum performance, please consult your Distributor or Binks Finishing Specialist when replacing or designing any HLVP outfit. Model 135-1058 2 h.p. compressor Model 80-272 1 quart SS cup assembly Zinc-Coated 2.8 Gallon ASME PT Tanks Model 83Z-220 Durable, economic tanks that can handle up to 80 PSIG. Made of heavy-gauge steel, coated on the inside and outside with zinc plating and chromate dip. Thiokol gaskets. Pressure Tank: Model 83Z-220 Agitator Drive: None Air Control: Model 83-2417 Regulators: Quantity 2 Shipping Wt. (lbs): 30 Part Sheet: 1458 Model 80-350 Ideal for small batch production spraying (2 qt. capacity) Model 80-356 SG2 Cup Liners Includes 12 plastic liners for easy clean-up. Air Nozzle Test Gauge Model 73-134 Regulator Pressure Tank Liners Save clean-up time and solvent costs with these disposable polyethylene liners. Use liners with all systems. Carton of 80 Liners for 2.8 Gallons ASME PT Tanks Part Number Description 54-3622 92HA & 93HA Nozzle (Mach 3SL) 54-3908 900 Series 54-3935 95 & 97 Series 54-4066 80 Liners 54-4078 95AS & 97AS Nozzles (Siphon) 54-4150 2S, 2P Cub Gun 54-4356 93P Nozzle Five Easy Ways to Order from Fluid-Air Products Inc. CALL Toll-Free 800-365-7565 to order MAIL your order 12834 Gravois Rd. St. Louis, MO 63127 FAX your order 314-729-7099 E-MAIL your order info@fluidair.com WEBSITE Visit our site www.fluidair.com and link to www.gsa.gov for on-line ordering 66

Spray Gun Accessories Spray Guns-Accessories Part Number 73-125 Air Controller For air inlet at-the-gun mounting to give convenient, immediate pressure reading and correction. Anodized aluminum body is fitted with: 1/4 NPS (f) swivel connection for 360 o variable position 1/4 NPS (m) thread Pressure adjusting knob and pressure gauge. Part Sheet: 2142 Fluid Strainer Assemblies In-line cartridge filter. Part Number 54-988 (100 mesh) Part Number 54-982 (150 mesh) Shipping Weight 1 lb. In-Line Cartridge Filter Fluid Circulating Connections Part Number: 72-1823 (stainless) Use for Spray Gun Models 95 and 2001 in circulating and heated fluid systems. 3/8 NPS (m) connection. Shipping weight 14 oz. Spray Gun Extensions Air Metering Valve Assemblies Part Number: 73-159 Type: 90 o Thread: 1/4 NPS (f) 1/4 NPS (m) For Mach 1 and Mach 1A spray guns only. Part Number 54-4090-90o angle head, Part Sheet 2635 Part Number 54-4091 45o angle head, Part Sheet 2635 In-line Cartridge Filter* Cartridge Replacement Mesh Filter Screen Assembly 54-990 54-987 100 54-981 54-980 150 Shipping Weight 14 oz. 4 oz. * Also adaptable to fluid lines from spray guns Fluid Inlet Tube Extension (less fluid stainer) Part Number: 54-957 Brings air and fluid hoses together at the base of the spray gun. Use for Spray Gun Models 95, 95SL and 2001. 3/8 NPS (m) connection. Shipping weight 8 oz. For hard to reach location. Attach to Spray Gun Models 95 and 2001. For conventional coatings. Air inlet 1/4 NPS (m) Fluid inlet 3/8 NPS (m) Length Part Shipping Act in Feet No. Wt. Wt. (lbs.) (lbs.) 4 54-296 4 3 6 54-297 5 1/4 4 Gunner s Mate (spray gun lubricant) Part Number: 6-429 One case of (20) two-ounce Gunner s Mate bottles. Part Number: 6-428 Two ounce bottle of Gunner s Mate. 67

Spray Gun Accessories 45 & 90 Deg. Angle Heads Extensions For MACH 1 and MACH 1A spray guns only. Part Number 54-4090-90 degree angle head Part Sheet: 2635 Part Number 54-4091 - 45 degree angle head Part Sheet: 2635 52-3706 6 52-3718 18 52-3712 12 52-3724 24 Note: Extensions may be joined together for added length. Specify new needle length. Extensions are sold less air cap and fluid nozzles. Specify spray gun model that will be used with the extension. Siphon Hoses and Ball Valves Construction Part Number Description Tube Fittings W/PSI 5 Gallon 55 Gallon Siphon 874500 1 siphon hose w/16 wand (3/4) Nylon SS X 874501 1 siphon hose w/36 wand (3/4) Nylon SS X 874504 1/2 siphon hose w/16 wand Nylon SS X Five Easy Ways to Order from Fluid-Air Products Inc. CALL Toll-Free 800-365-7565 to order MAIL your order 12834 Gravois Rd. St. Louis, MO 63127 FAX your order 314-729-7099 E-MAIL your order info@fluidair.com WEBSITE Visit our site www.fluidair.com and link to www.gsa.gov for on-line ordering 68

Accessories for Air Control Equipment Model 72-81611 Model 72-21712 Model 172-31611 Low Medium & High Part No. Size Pressure (PSI) Thread 72-81611 3/8 250 1/4 NPS (m) 1/4 NPT (m) 72-81712 3/8 250 3/8 NPS (m) 3/8 NPT (m) 72-21611 3/8 500 1/4 NPS (m) 1/4 NPT (m) 72-21712 3/8 500 3/8 NPS (m) 3/8 NPT (m) 72-11611 3/8 4000 1/4 NPS (m) 1/4 NPT (m) 72-11712 3/8 4000 3/8 NPS (m) 3/8 NPT (m) 172-31611* 3/8 4000 1/4 NPS (m) 1/4 NPT (m) 172-31712* 3/8 4000 3/8 NPS (m) 3/8 NPT (m) 72-50202 3/4 1000 3/4 NPT (f) 3/4 NPT (f) *Stainless Steel Ball Valve Replacement seal 83-2600-5 (pack of 5) Binks Automatic Drains Medium & High Fits all Binks oil and water extractors, coalescers, and dryers. Merely remove the drain screw and replace it with the Binks automatic drain and furnished nipple. Oil, water, sludge and other contaminants draining from the compressed Model 37-1553 air line will be trapped in the bowl. The accumulation of liquid in the bowl causes the drain float to rise. This action admits bowl air pressure into a piston chamber which, in turn, opens a bleed valve and allows the liquid in the bowl to be expelled under pressure. When the liquid level drops sufficiently, the float closes and draining stops. The adaptive nipple with fit 1/8 NPT pipe or 3/8-27 machine threads. This makes field conversions simple. Part Sheet 2453 For Repair Kit, order Part No. 37-1552 For 3 Drain Hose, order Part No. 72-692 DM Nipple and 71-7306 Drain Hose Model 85-200 Capacity: 40 CFM,0-150 PSIG 1.13 M 3 /Min, 0-10.34 BAR Inlet: 3/8 NPT (f) Three regulated outlets: 1/4 NPT (f) Part Sheet 1787 Weight: 2-1/2 lbs., 1.13 kg. Model 85-201 Capacity: 40 CFM,0-150 PSIG 1.13 M 3 /Min, 0-10.34 BAR Inlet: 3/8 NPT (f) Two main line pressure outlets: 1/4 NPT (f) Two regulated outlets: 1/4 NPT (f) & 3/8 NPT (f) Part Sheet 1787 Weight: 2-1/2 lbs., 1.13 kg. Model 85-225 Capacity: 100 CFM,0-150 PSIG 2.83 M 3 /Min, 0-10.34 BAR Inlet: 1/2 NPT (f) Three regulated outlets: one 1/2 NPT (f) two 1/4 NPT (f) Part Sheet 1787 Weight: 3-1/2 lbs., 1.59 kg. Binks Pressure Gauges Easy to read dials for positive, accurate and continuous measure of air pressure. Quick, simple installation. Air models have fit 1/4 Model 83-1290 NPT (m) inlet connection. Nine models are available (two with back inlets). Shipping weight 1 lb. each. Model Range Range Number (PSI) (BAR) 83-1636 0-15 1-1.03 83-1414 0-30 0-2.07 83-386 0-60 0-4.14 83-1355 0-100 0-6.89 83-2727 0-100 0-6.89 83-1290 0-150 0-10.34 83-2218** 0-160 0-11.03 83-387 0-200 0-13.79 ** With Back Inlet 69

Cartridge Respirators Superior Protection against Organic Vapors, Fumes, Dusts and Mists Millennium 3000 - Premium Paint Spray Respirator Breathe easier with the Binks Millennium 3000 - a premium charcoal filter respirator. Ready-to-use right out of the box, the Millennium 3000 combines superior comfort with the fit, durability and protection of a conventional half-mask respirator. Designed with finishing professionals in mind, the Millennium 3000 features: Heavy duty silicone and metal face-piece for increased durability and comfort Adjustable, heavy duty straps and head band Maximum serviceability - fully serviceable with a Binks Tune-Up Kit Extended life - withstands repeated cleanings and exposure to paints and solvents without deterioration. Millennium 2000 - Classic Paint Spray Respirator For economical protection against organic vapors, fumes, dusts, and mists, try the Binks Millennium 2000 - a value-priced charcoal respirator. Ready-to-use right out of the box, the Millennium 2000 provides the fit and comfort of a traditional respirator and protection from paints and solvents. An oil-resistant pre-filter (Part #40-1935) is also available. The value-priced Millennium 2000 is a good choice when convenience and value are important considerations. Both the Binks Millennium 3000 and Millennium 2000 Respirators meet 42 CFR Part 84 Standards. Binks Tech Tip... When should cartridges and filters be replaced? The service life of cartridges and filter depends on several factors including breathing rate/volume, concentration of contaminants, temperature and humidity. Replace chemical cartridges when you detect odor or taste of vapors, or when you experience eye, nose or throat irritation. Replace pre-filters or filters when you experience increased resistance to breathing. WARNING! Binks Millennium paint spray respirators are not to be used with urethane paints or other paints containing di-isocyanates. Di-isocyanates have a low odor threshold and are not easily detectable by smell. A dangerous level of di-isocyanates can break through a charcoal filter cartridge before the user is able to smell it. Painters using such paints must use an air-supplied respirator. 70

Understanding Pressure Drop Pressure Drop Basics Understanding pressure drop requires a basic knowledge of CFM (cubic feet per minute) and psi (pounds per square inch). CFM refers to the given volume of air that flows past a given point in one minute. PSI is the amount of force pushing the cubic foot of air through the hose or tool. The amount of air that a toll consumes all remain constant for a given set of conditions. Pressure will always drop when the tool is turned on and when the air begins to flow through the hose. In addition, pressure drop will vary in relation to any adjustment made on the tool. The same pressure loss principles apply when moving fluid through a hose. Be sure to consider pressure loss when choosing fluid hose and fittings. Flow of free air in cubic feet per minute Pressure Drop Chart Pressure Drop Points Losses in pressure (psi) are dependent on the variables of hose length, hose diameter, volume (cfm), and the number and design of quick disconnects. To minimize the effects of pressure drop and the resulting lack of volume, consider the following. Frictional resistance between the fluid and the walls of the hose. Internal resistance (shear) - fluid moves faster through the center of the hose and slower against the walls. Change in direction of air or fluid through the system. Volume at any given time as determined by back pressure. The number of system connection, adapters, nipples, valves, filters and air and fluid controls. Hose I.D. - use the minimum I.D. necessary for each application Hose length - pressure drop is proportional to hose length Surface of the hose s inner tube - a rough surface can increase pressure drop up to 50%. Technical Data Pressure drop in ounds per sq. in., per 100 ft. of hose To determine pressure drops fo hose lengths other than 100 (Pressure Dropper Chart Figure) x (Ft. of Hose) = Pressure drop for hose used 100 This chart is for approximating and should only serve as a guide in sizing air hose. Pressure drops are directly proportional to hose lenghts. That means that if hose length doubles, for example, pressure drop doubles. Example: 100 x 1/2 I.D. hose at 40 cfm has a pressure loss of 17 1/2 psi. 200 x 1/2 I.D. will lose 35 psi 50 x 1/2 I.D. will lose between 8 to 9 psi. 71

Premium Spray Finishing Air Hose Smooth Cover Recommended Use Premium spray finishing air hose. Highest oil resistance rating -- Class A. Designed for all finishing operations as well as rugged industrial applications, especially applications requiring lubricants in the airline supply or where oil and grease are present in the environment. Excellent for use with water and water-based materials. Temperature range from -20oF to +200oF(max). Tube Nitrile Rubber (Buna-N) Class A oil resistance Reinforcement High tensile strength rayon braid and spiral reinforcement. Specially designed for maximum flexibility (under pressure) and maximum coupling retention. Cover Neoprene, red, smooth. Abrasion resistant. Class A oil resistance Connections Three-piece, plated brass, reusable. I.D. Sizes 1/4, 5/16, 3/8, 1/2 and 3/4 Smooth Cover. Bulk Hose Chart - Smooth Cover STD. REEL MAXIMUM LENGTH IN FT. SHIPPING WGT. SIZES AVAILABLE BULK HOSE WORKING BEND PLUS OR MINUS BASED ON AVG. HOSE WEIGHT I.D. O.D NUMBER PRESSURE (PSI) RADIUS 50 FT. FEET PER REEL PER 100 FEET 1/4 1/2 71-10000 250 2 3/4 500 50 lbs 10 lbs. 5/16 5/8 71-11000 250 3 500 87 lbs. 16.2 lbs. 3/8 11/16 71-12000 250 3 1/2 500 96 lbs. 18 lbs. 1/2 7/8 71-13000 250 4 300 86 lbs. 26.8 lbs. 3/4 1 1/8 71-14000 250 6 300 112 lbs. 35 lbs. Hose Assemblies and Connections HOSE SIZES AVAILALBE LENGTH OF ASSEMBLY BULK HOSE CONNECTION TYPE OF CONNECTION I.D. HOSE PART NO. NUMBER THREAD SIZE CONNECTION PART NUMBER 1/4 5 ft. 71-1101 71-10000 1/4 NPS (f) three piece reusable 72-1303 1/4 25 ft. 71-1105 71-10000 1/4 NPS (f) three piece reusable 72-1303 1/4 50 ft. 71-1106 71-10000 1/4 NPS (f) three piece reusable 72-1303 5/16 5 ft. 71-1201 71-11000 1/4 NPS (f) three piece reusable 72-1317 5/16 25 ft. 71-1205 71-11000 1/4 NPS (f) three piece reusable 72-1317 5/16 50 ft. 71-1206 71-11000 1/4 NPS (f) three piece reusable 72-1317 3/8 25 ft. 71-1355 71-12000 1/4 NPS (f) three piece reusable 72-1325 3/8 50 ft. 71-1356 71-12000 1/4 NPS (f) three piece reusable 72-1325 Reusable Connections 72

Fluidall TM Fluid Hose Nylon Lined, Maximum Versatility Spray Guns-Accessories Recommended Use Premium, versatile fluid hose, for finishing operations plus a wide range of fluid applications. FluidallTM is ideal for resins and solvents contained in latices, spoxies, urethanes, alkyds, primers, acrylics, polyesters, silicones, bitumastic coatings, oil and water based paints, lacquers, alcohol and latex coatings. Temperature range from -30 o F to +160 o F (max). Tube Nylon. Reinforcement High tensile rayon braid. Specially designed for maximum flexibility (under pressure) and maximum coupling retention. Cover Neoprene, black, smooth. Abrasion resistance. Class A - Oil Resistance. Connections Three-piece, plated brass, reusable. I.D. Sizes 1/4, 3/8, 1/2, 3/4 and 1 Bulk Hose Chart - Smooth Cover STD. REEL MAXIMUM LENGTH IN FT. SHIPPING WGT. SIZES AVAILABLE BULK HOSE WORKING BEND PLUS OR MINUS BASED ON AVG. HOSE WEIGHT I.D. O.D NUMBER PRESSURE (PSI) RADIUS 50 FT. FEET PER REEL PER 100 FEET 1/4 1/2 71-280 500 3 500 43 lbs 8 lbs. 3/8 11/16 71-282 500 3 1/2 500 83 lbs. 15 lbs. 1/2 7/8 71-283 750 5 300 74 lbs. 22 lbs. 3/4 1 3/16 71-284 750 8 300 118 lbs. 36 lbs. 1 11/2 71-285 750 12 300 168 lbs. 53 lbs. Hose Assemblies and Connections HOSE SIZES AVAILALBELENGTH OF ASSEMBLY BULK HOSE CONNECTION TYPE OF CONNECTION I.D. HOSE PART NO. NUMBER THREAD SIZE CONNECTIONPART NUMBER 1/4 5 ft. 71-3380 71-280 3/8 NPS (f) three piece reusable 72-1306 1/4 25 ft. 71-3383 71-280 3/8 NPS (f) three piece reusable 72-1306 1/4 50 ft. 71-3384 71-280 3/8 NPS (f) three piece reusable 72-1306 3/8 5 ft. 71-3300 71-282 3/8 NPS (f) three piece reusable 72-1328 3/8 25 ft. 71-3303 71-282 3/8 NPS (f) three piece reusable 72-1328 3/8 50 ft. 71-3304 71-282 3/8 NPS (f) three piece reusable 72-1328 1/2 25 ft. 71-3403 71-283 1/2 NPS (f) three piece reusable 72-1334 1/2 50 ft. 71-3404 71-283 1/2 NPS (f) three piece reusable 72-1334 Reusable Connections 73

Specialized Hose Assemblies Premium Airless Paint Spray Hose Conductive -- No Wire Recommended Use High pressure paint spray applications, including electrical airless. Compatible with a wide range of materials, solvents and water based coatings. Designed for the most durable and extended service. Temperature range -40 o F to +180 o F. Tube Nylon - this no-wire hose incorporates a nylon core tube with a conductive polymer surrounding it. Electrical conductivity will remain throughout the hose life. Reinforcement High tensile nylon braid reinforcement. Cover Polyurethane, white or yellow depdning on hose I.D. Connections Permanently attached, plated steel with spring guards. I.D. Sizes 3/16, 1/4, 5/16, and 3/8. Specifications RATED BEND LBS./ I.D. O.D. W.P. RADIUS 100 FT. 3/16.425 3000 PSI 1 1/2 4.7 1/4.520 3000 PSI 1 1/2 7.9 5/16.520 3000 PSI 1 1/2 8.2 3/8.730 3000 PSI 2 1/2 13.3 Hose Assemblies and Connections JACKET SIZES LENGTH ASSEMBLY CONNECTION TYPE OF COLOR I.D. OF HOSE PART NO. THREAD SIZE CONNECTION 3/16 30 whip end 71-8360* 1/4 NPS (f) permanent 3/16 5 ft. 71-8085 1/4 NPS (f) permanent 3/16 25 ft. 71-8088 1/4 NPS (f) permanent 1/4 15 ft. 71-7703 1/4 NPS (f) permanent 1/4 25 ft. 71-7704 1/4 NPS (f) permanent 1/4 50 ft. 71-7705 1/4 NPS (f) permanent 5/16 25 ft. 71-7504 1/4 NPS (f) permanent 5/16 50 ft. 71-7505 1/4 NPS (f) permanent 3/8 5 ft. 71-8421 3/8 NPS (f) permanent 3/8 10 ft. 71-8422 3/8 NPS (f) permanent 3/8 50 ft. 71-8425 3/8 NPS (f) permanent 3/8 100 ft. 71-8427 3/8 NPS (f) permanent Yellow Jacket color; White Jacket color * Connection Thread = 1/4 NPS (f) x 1/4 NPT (m) w/30 deg. seat. Hose connector 72-691, 1/4 NPS(m) x 1/4 NPS(m) for connecting hose assemblies together. Bulk hose not available - assemblies only. Yellow Jacket color White Jacket color 74

Specialized Hose Assemblies Contractor Quality Airless Paint Spray Hose Conductive -- No Wire Spray Guns-Accessories Recommended Use Designed specifically for commercial and industrial painting contractors and heavy work load applications. Excellent flexibility and durability. For use with both solvent and water-based coatings. Tube Nylon. Reinforcement and Cover Consists of a seamless extruded synthetic braid reinforcement ad a pinpricked polyurethane cover. The innermost braid layer is chemically bonded to the innertube and the outer layer is chemically bonded to the cover. A static drain element consisting of flexible electrically conductive plastic tape is located between the braid layers. Cover-black. Operating temperature from 0 o F to +200 o F. SIZES LENGTH ASSEMBLY CONNECTION TYPE OF I.D. OF HOSE PART NO. THREAD SIZE CONNECTION 1/4 25 ft. 71-3530 1/4 NPS (f) permanent 1/4 50 ft. 71-3531 1/4 NPS (f) permanent Working pressure 3,300 PSI. Burst pressure 13, 200 PSI Hose connector 72-691, 1/4 NPS(m) x 1/4 NPS(m) for connecting hose assemblies together. Connections Permanently attached, plated steel with spring guards. I.D. Sizes 1/4. 75

Tubing Nylon, Polyethylene, Teflon and Reusable Connections Nylon Recommended Service Moderate pressure service for conveying enamels, lacquers, and other finishes. (Solvent-resistant nylon tubing.) Also suitable for amine catalysts in foam coating applications. May be used as an air hose (low pressure) in larger sizes shown. CONNECTIONS RATED WORKING LBS. BULK SOLID SOLID SWIVEL SWIVEL SWIVEL SWIVEL SWIVEL SWIVEL HOSE SIZE PRESSURE (PSI) 100 SIZE TUBING NO. THREAD PART NO. THREAD PART NO. THREAD PART NO. THREAD PART NO. I.D. O.D. 70 O F 150 O F FEET 1/8 71-226 1/8 NPT(m) 72-1676 1/4 NPS(f) 72-1677 3/8 NPS(f) 72-1805* 9/16-20(f) 1/8.225 475 190 1.25 3/16 71-230 1/4 NPS(f) 72-1679 3/8 NPS(f) 72-1729 3/16.264 225 190 1.28 1/4 NPS(f) 72-1747 3/8 NPS(f) 72-1790* 1/4 NPS(f) 72-1792- 1/4 71-227 1/8 NPT(m) 72-1680 1/4 NPS(f) 72-1681 3/8 NPS(f) 72-1683 9/16-20(f) 72-1682 1/7.350 225 190 2.18 1/4 NPS(f) 72-1687 3/8 NPS(f) 72-1689 1/4 NPS(f) 72-1799* 3/8 NPS(f) 72-1801* 1/4 NPS(f) 72-1800- 3/8 NPS(f) 72-1802- 3/8 71-229 1/4 NPS(f) 72-1811* 3/8 NPS(f) 72-1685 9/16-20(f) 72-1684 3/8.500 200 140 3.90 3/8 NPS(f) 72-1812* Connections: Reusable, plated brass, with spring guard All nylon tubing sold in bulk only - 500 ft. -Reusable, stainless, with spring guard Flexible nylon tubing, translucent, no reinforcement *Reusable, stainless swivel nut and tailpiece Polyethylene Recommended Service Low pressure air and fluid service. Suitable for conveying water-based paints and catalyst, and for polyester, lacquer and fine finishes CONNECTIONS BULK SWIVEL SWIVEL SWIVEL SWIVEL SWIVEL HOSE SIZE RATED LBS./100 SIZE TUBING NO. THREAD PART NO. THREAD PART NO. THREAD I.D. WALL W.P.,PSI FEET 1/4 71-223 1/4 NPS(f) 72-1579 3/8 NPS(f) 72-1581 9/16-20(f) 1/4 NPS(f) 72-1583* 3/8 NPS(f) 72-1585* 9/16-20(f) 1/4 1/16 100 2.5 3/8 NPS(f) 72-1839 Connections: *Reusable, plated brass, with spring guard Polyethylene tubing sold per foot - no specific box size Stainless steel swivel nut and tailpiece Flexible polyethylene tubing, translucent, no reinforcement Teflon, Fluid Tubing CONNECTIONS BULK SWIVEL SWIVEL SWIVEL SWIVEL SWIVEL SIZE TUBING NO. THREAD PART NO. THREAD PART NO. THREAD 1/8 71-248 1/4 NPS(f) 72-1944 3/8 NPS(f) 72-1945 3/16 71-209 1/4 NPS(f) 72-1577 3/8 NPS(f) 72-1730 1/4 71-204 1/4 NPS(f) 72-1579 3/8 NPS(f) 72-1581 9/16-20(f) 1/4 NPS(f) 72-1583* 3/8 NPS(f) 72-1585* 9/16-20(f) 3/8 71-207 3/8 NPS(f) 72-1685 1/4 NPS(f) 72-1811 3/8 NPS(f) 72-1812 9/16-20(f) SPECIFICATIONS BULK HOSE HOSE SIZE RATED W.P. LBS./100 TUBING NO. I.D O.D PSI FEET 71-204 1/4 3/8 140 5 71-209 3/16 5/16 140 4.5 71-207 3/8 1/2 140 6.5 71-248 1/8 1/4 140 5 *Furnished with spring guard. Stainless steel swivel nut and tailpiece. Teflon tubing sold per foot - no specific box size 76

Hose/Tube Accessories Spray Guns-Accessories Model 72-21712 Medium & High Medium & High Model 172-31611 Model 72-81611 Low & High Pressure Ball Valves Low 72 Series Quick Disconnect (Body and Stem Assembly) High Pressure Manifolds PART NO. SIZE PRESSURE (PSI) THREAD 72-81611 3/8 250 1/4 NPS(m) 1/4 NPT(m) 72-81216 3/8 250 3/8 NPT(m) 1/4 NPS(m) 72-81712 3/8 250 3/8 NPS(m) 3/8 NPT(m) 72-21611 3/8 500 1/4 NPS(m) 1/4 NPT(m) 72-21712 3/8 500 3/8 NPS(m) 3/8 NPT(m) 72-11611 3/8 4000 1/4 NPS(m) 1/4 NPT(m) 72-11712 3/8 4000 3/8 NPS(m) 3/8 NPT(m) 172-31611* 3/8 4000 1/4 NPS(m) 1/4 NPT(m) 172-31712* 3/8 4000 3/8 NPS(m) 3/8 NPT(m) 72-50202 3/4 1000 3/4 NPT(f) 3/4 NPT(f) 72-60202* 3/4 3000 3/4 NPT(f) 3/4 NPT(f) PART NO. DESCRIPTION THREAD 72-887 Stem Assembly Only 3/8 NPS(f) 72-885 Body Assembly Only 3/8 NPS(m) 72-888 Body & Stem Assembly 3/8 NPS(m) X 3/8 NPS(f) *Stainless Steel Ball Valve replacement seal 83-2600-5 (pack of 5) Part No. 72-445 (Stem Only) Part No. 72-2063 (Body Only) Stainless Steel Low Pressure Manifolds PART NO. PLATED STAINLESS BRASS STEEL THREADS SWIVEL NUT 72-1823 (2) 3/8 NPS(m) 3/8 NPS(f) 72-1927* - (2) 1/4 NPS(m) 1/4 NPS(f) 72-1869 (2) 1/4 NPS(m) 3/8 NPS *Plated brass threads, plated steel body and swivel nut Steel or Brass, Body (plated Plated Brass Threads Low Pressure Air Quick Disconnects PART NO. DESCRIPTIONS THREAD 72-445 Stem Assembly Only 1/4 NPS(f) 72-467 1/4 NPT(m) 72-2063 Body Assembly Only 1/4 NPS(m) 72-2066 5/16 ID Hose 72-2073 1/4 NPT(f) 72-470 Body & Stem Assembly 1/4 NPS(m) X 1/4 NPT(m) 72-476 1/4 NPT(f) X 1/4 NPT(m) 72-2076 1/4 NPS(m) X 1/4 NPS (f) High Pressure Manifolds PART NO. INLET OUTLET 72-1070 1/4 NPS(f) (2) 1/4 NPS(m) 72-1071 1/4 NPS(f) (3) 1/4 NPS(m) Note: Outlets include H.P. Ball Valves with connection thread as indicated. Plated Steel 77