Pole Drilling Instructions For Mounting Fixtures On Poles By Others ARX, ALT, WP9, AR/SAR, ET/SET, BNS1, SRS, CC, CCS, and UR.

Similar documents
Cable & Wire Management

Bulkhead Connections for Series B 1326 Cables

Section 6 Feet & Casters

STEEL. P ole P roducts

Current-limiting fuse mounts

Cable & Wire Management

Pole Basics January, 2008

Victory A-Series Actuators PRODUCT CATALOG V55A V43A FG1 V32A FG2 V26A

Drawing No: C Plcs. F Test Project Staatsmeisterschaft All Rights Reserved.

36' 10' 3/16" 1020 lbs 1220 lbs 3' 10' WIDTH

Section Contents. Product Reference Guide Numbering System / How To Order & 16. Selection Procedure... 17


Disconnect Switch and Circuit Breaker Mechanism Specifications Bulletin Number 1494

FIPRO Fire Protection Panels For Shipbuilding and Offshore Interior Applications

General Information. Related Documents. Notations and Conventions F R L B. 1007NT Caster Brace Update Pull-Type 10-Foot 09 Series No-Till Drills

Channel Cable Tray - Accessories & Fittings

"F" Series MGS Reducer Round Flange "F" Housing Shaft Output Dimensional Data

R100/R200 Series & VR100/VR200 Series Spiral Bevel Gear Drives

Special Order Profiles Terry Mannion FIPRO G aarerstrasse 8 Postfach 452 H-6301 Zug Switzerland Phone

Needle Valves. SM Series. Needle Valves - SM Series. Medium Pressure Valve Features: Medium Pressure. Pressures to 20,000 psi (1379 bar)

Needle Valves. Needle Valves - High Pressure. High Pressure 30SC, 30VM, 40VM, 60VM, 100VM, & 150V Series. Pressures to 150,000 psi (10342 bar)

Amphenol. Amphenol ACA-B Reverse Bayonet Coupling Connectors

Heer Technology & Control

Fleet-Lift System Components

4412HS Wway 4X4X12 N1 HC Lay-In. Features. Material, Color, and Finish. Dimensions and Weight. Long Description. Manufacturer Information

Needle Valves. Needle Valves - High Pressure. 30SC, 43SC, 30VM, 40VM, 60VM, 100VM & 150V Series. High Pressure. Pressures to 150,000 psi (10342 bar)

Needle Valves. 10V & SW Series. Needle Valves - 10V & SW Series. Low Pressure Valve Features: Low Pressure. Pressures to 15,000 psi (1034 bar)

229 B-Line series Pipe Hangers & Supports

Avia Collection Swivel Seating

4.7. Contents Description Heavy Duty Hesitation Switches. Product Description. Standards and Certifications. Heavy Duty Hesitation Switches

Specifications CCS1902

Pipe Hangers. 47 B-Line series Pipe Hangers & Supports

421WC A A-9 AX A-9 482TC A-10. Tough Cover SAE 100R1 TYPE AT 482ST A-10 BXX A A A-11

Brand Model Number Serial Number Range Description Ferris , , , , , , ,

POWER CONTROL SYSTEM SECTION PCS CONTENTS ELECTRICAL & POWER CONTROL PCS-1 IPDM E/R SYSTEM DESCRIPTION... 2 ECU DIAGNOSIS INFORMATION...

Pole Basics. Table of Contents

Specifications. S&C Alduti-Rupter Switches with Power Fuses Outdoor Distribution (14.4 kv through 46 kv)

SS5Y 3 05 U C6. Series SY3000/5000 Base Mounted Monifold Stacking Type/DIN Rail Mounted Individual Wiring

Check Valves. VC Series - Cartridge Mounting 500 Bar. Innovative Fluid Power. Bulletin 86624

230 kv Aluminum Bolted Terminal Connectors

NSF International Certified. Polished matte finish maintains clean appearance throughout operation. Optional high. pressure washdown.

The Industrial Choice. Model PB. Belt Driven. Model PB Direct Drive PRESSURE BLOWER. Model PB

Needle Valves. 10V & SW Series. Needle Valves - 10V & SW Series. Low Pressure Valve Features: Low Pressure

Pipe Hangers. Pipe Hangers. Pipe Hangers & Supports

Installation, Maintenance & Operating Instructions

Needle Valves. Needle Valves - High Pressure. 30SC, 43SC, 30VM, 40VM, 60VM, 100VM & 150V Series. High Pressure. Pressures to 150,000 psi (10342 bar)

DOUBLE ENVELOPING WORM GEAR SETS

SPECIFICATIONS. S&C Alduti-Rupter Switches with Power Fusesa SPECIFICATION BULLETIN Indoor Distribution (4.8 kv and 13.

Selection Information Molded Case Circuit Breakers

Pages 2-3 Standard Straight Shank Holder. Pages 8-11 Speed & Feed Chart and Coolant Recommendations

Specifications. S&C Omni-Rupter Switches Outdoor Distribution (14.4 kv and 25 kv) Conditions of Sale

Standard Features. Available Options ABOVE FRAME SERIES AF SERIES ROLL-OFF CABLE HOISTS. » 60,000 lb. capacity» Tandem axle

CSSDR-1. C Series Carbon Steel Bar Stock Ball Valves 4.1

Bike Bollard R-7904 (RSA)

Section VIII Hydraulic Tooling

Fixture Type: Date: Base Cover: Poles are Provided With a Two-Piece Formed Steel Base Cover that is Easily Assembled and Fitted Over Pole Base.

hydraulic power clamps

Worm Gear Hand Winches Up to 4000 lb capacity

Specifications. S&C Power Fuses Types SM- 4, SM-5, SMD-20, and SMD-40 Outdoor Distribution (4.16 kv through 34.5 kv)

5/8 (16) DIA. MOUNTING HOLES TYP [4] PLACES. SEE NOTE #3 ACCESS PANEL BOTH SIDES 2 1/2 (64) Unit Size Fan Size L W H C D E F G J (508) (406) 25 (635)

Reverse Bayonet Coupling Connectors

DOCUMENT # LINE NO. NUMBER

S&C Circuit-Switcher Mark VI Outdoor Transmission (69 kv through 138 kv)

GEN2 T-A Drill Inserts

NSK Linear Guides. HA Series for Machine Tools

FR 9001 Aluminum Sliding System

hydraulic power clamps

Audio/Video Reels. You Can t Buy A Better Reel. Family owned and operated since 1933

Cable & Wire Management

THERMAL-MAGNETIC/MAGNETIC ONLY MOLDED CASE CIRCUIT BREAKERS

JERGENS SPECIALTY FASTENERS TRUE LOK TOGGLE CLAMPS

Stainless Steel Reels

DOWN Position. Base Circuit See Page V11-T4-35. (Keyway) 1PST ON NONE OFF A (8.74) (11.91)

Junction Boxes & Enclosures JBES Series: Pre-drilled 316L Stainless Steel Junction Boxes Increased Safety

CHAIN & COMPONENTS.

June 2005 CN35 Electrically Held Vol. 2, Ref. No. [0494]

Introducing the new Cross Bow LED Architectural LED Luminaire and Bollard Series

Type 4 X Panel Enclosures

Type 4 Panel Enclosures

1 Cylinder. 1 - Cylinder Type 3 - Cylinder Capacity 4 - Cylinder Stroke. 2 - Cylinder Options. Cylinder Accessories

A VH Series. VH Series. AComparison with NSK standard products

BeSPACE Collection Lounge & Tables

CXVB Engineering Data

Universal Side of Pole Mount

Agency Air-Inert Gas Water. Approx. Shipping Weight (lbs.) 1/2 5/ P Brass. Const.

CXVT Engineering Data

Agency Air-Inert Gas Water. Approx. Shipping Weight (lbs.) 1/2 5/ P Brass. Const.

230 kv Aluminum Bolted Bus Supports TYPE 16300, 16500, Ordering Information. or

Series 1 Steel - Straight Sections

Series 1 Steel - Straight Sections

Amphenol. Amphenol GT Series Reverse Bayonet Coupling Connectors. Ruggedized Connector Series for Rail/Mass Transit and other Harsh Environments

Circuit Breaker Accessories BREQS125 BRHDK125

Butt Contact Pushbutton Switches. Series 30 and 46 Snap-in Panel Mount

Custom Side of Pole Mount

5PT10 / 5PT lb and 2000 lb Capacity Portable Davit Cranes SERIES

HIGH PRESSURE RADIAL PRESSURE BLOWERS

BODY CONTROL SYSTEM SECTION BCS CONTENTS ELECTRICAL & POWER CONTROL BCS-1 BASIC INSPECTION... 3 FUNCTION DIAGNOSIS... 5 INSPECTION AND ADJUSTMENT...

Vehicle Fitment Guide Please complete the Vehicle Fitment Guide in its entirety and either or Fax to Billet Specialties.

CG Series Visual Index

Transmission Line String Hardware

Transcription:

17760 Rowland Street ity of ndustry, 991748 626/968-5666 X 626/369-2695 Pole rilling nstructions or Mounting ixtures On Poles y Others RX, LT, WP9, R/SR, T/ST, NS1, SRS,, S, and UR. The following is the information required for the pole vendor to figure the pole strength and size of pole. NOT: KM Lighting assumes no responsibility for pole strength or size of poles by others. See reverse for fixture mounting arrangements, drilling instructions, and steps to follow to receive the proper support arm for mounting fixtures. RX rchetype S W/ UPSWPT RM RONT STRT RM S W/ STRT S W/ UPSWPT RM RM RONT at. No. Max. Wt. RX09 7-7/16 6-1/16 20-3/8 26-7/16 5-1/4 6 20-3/8 26-3/8 13-5/8 5-5/16 28 lb. RX16 8-1/8 9-1/8 23 32-1/8 5-7/8 8-7/8 23 31-7/8 17 5-7/8 39 lb. RX25 8-3/4 9-1/8 27-5/16 36-7/16 6-1/2 8-7/8 27-5/16 36-3/16 20-11/16 6-1/2 68 lb. LT ltitude S VW RONT VW S VW RONT VW at. No. pprox. Wt. LT60 2 7-3/4 23-1/4 17 4-1/8 3-7/8 27 lb. LT96 2 7-3/4 26-3/4 17 4-1/8 3-7/8 30 lb. LT120 2 7-3/4 30-1/4 17 4-1/8 3-7/8 34 lb. LT180 2 9-3/4 32-1/2 25 4-1/8 3-7/8 49 lb. LT240 2 9-3/4 36-3/4 25 4-1/8 3-7/8 55 lb. LT300 2 9-3/4 42-3/4 25 4-1/8 3-7/8 67 lb. Revised N Status 95517

Pole rilling nstructions or Mounting ixtures On Poles y Others RX, LT, WP9, R/SR, T/ST, NS1, SRS,, S, and UR. WP9S / WP9L WRP9 S VW S S VW VW RONT VW RONT RONT VW VW at. No. Max. Wt. WP9S 8-15/16 5-9/16 26-15/16 4-7/16 4-1/8 15 8-15/16 1-1/2 30 lb. WP9L 10-5/16 5-15/16 35-1/8 5-1/8 5-1/2 20 10-5/16 1-15/16 50 lb. R / SR The rchetype 55 55 S VW S VW VW ROM POL S VW ROM POL S at. No. pprox. Wt. SR 5 7/16 2-3/4 17-1/8 4-17/32 12-19/32 1-3/4 6 12 4-1/2 30 lb. R 8 11/16 3-5/8 22-7/16 5-1/2 16-15/16 2 8 16 6 50 lb. T/ST The ntablature S VW S VW VW ROM POL S VW ROM POL S at. No. Max. Wt. ST 4-1/2 5 17-1/2 6 12 1-3/4 27 lb. T 6 8 23 8 16 2 50 lb. 2017 KM LTN 17760 Rowland Street ity of ndustry, 91748 626-968-5666 Page 2

Pole rilling nstructions or Mounting ixtures On Poles y Others RX, LT, WP9, R/SR, T/ST, NS1, SRS,, S, and UR. / S - urvilinear utoff Series S VW TOP VW at. No. pprox. Wt. 17/S17 6 4-1/2 17 8 2 13 27 lb. 21/S21 6 4-1/2 21 10 2 15 48 lb. 25/S25 6 8 25 10 2 20-1/2 68 lb. UR - Ouro rm S W/ UPSWPT RM RONT at. No. pprox. Wt. UR20 10.7 4.8 20.5 25.3 20.5 3.5 32 lb. UR28 11.9 4.9 28 32.9 28 4.4 50 lb. 2017 KM LTN 17760 Rowland Street ity of ndustry, 91748 626-968-5666 Page 3

Pole rilling nstructions or Mounting ixtures On Poles y Others RX, LT, WP9, R/SR, T/ST, NS1, SRS,, S, and UR. ixture mounting arrange ments: The desired mounting arrangement will determine the required position of dril ling on pole by others. Mounting arrange ment is deter mined by Kim catalog number. xample: 2 / R335 Quantity of fixtures per pole ixture atalog No. Mounting rrangement Note: or proper drilling of poles be sure to note fixture ori en tation to anchor bolts. Select one of the orientations suit ed to your pole and keep consistent for all poles the same. rawings below show proper orientation for fixture mounting arrange ment. rrangements,, L, and T are typical. rilling shown for fixture mounting or fixture mounting rilling shown typical 2 places at 180 ±1 45 ±K 90 ±K L or fixture mounting rilling shown typical 4 places at 90 ± K or fixture mounting L rilling shown typical 2 places at 90 ± K Orientation or Poles with nchor olts n orners of ase Plate. Orient Parallel To Street or Walkway T or fixture mounting T rilling shown typical 3 places at 90 ± K Kim Lighting shall supply fixture, support arm and fixture mount ing hardware. ll others shall be supplied by pole vendor. Y* or fixture mounting Y rilling shown typical 3 places at 120 ± K * or Round Poles Only 2017 KM LTN 17760 Rowland Street ity of ndustry, 91748 626-968-5666 Page 4 4 Kim Lighting

Pole rilling nstructions or Mounting ixtures On Poles y Others RX, LT, WP9, R/SR, T/ST, NS1, SRS,, S, and UR. elow is the information you must furnish KM Lighting so we can supply the proper support arm for mounting KM fixtures to poles by others. POL SZ: tem Number Type ottom (Spec. O.. or Sq.) Top (Spec. O.. or Sq.) eight Wall Thickness No. of ixtures Per Pole Quantity of Poles 1. 2. x x x x x x ill in the information below and return a copy to KM Lighting. ob Name: Pole Vendor: KM nvoice No.: Send opy to: Kim Lighting 17760 Rowland Street ity of ndustry, 91748 Phone: 626/968-5666 ate: ixture rilling nstructions: or RX, LT, NS1, SR, ST, SRS, UR, and WP9. ixtures Only. ixture rilling nstructions: or R,, S, and T ixtures. Pole Top K2 rill Pattern Pole Top K1 rill Pattern Support rm Outline Support rm Outline 1/2 ia.ole 2.00 ± 1/32 1/2 ia.ole 2.00 ± 1/32 1-7/8 ± 1/32 1-7/8 ± 1/32 3-1/2 ± 1/32 5-3/16 ± 1/64 3/4 iameter Wireway ole. eburr inside & outside. 1/2 ia.ole VW rawing not to scale. 3/4 iameter Wireway ole. eburr inside & outside. VW rawing not to scale. or warranty see http://www.hubbelllighting.com/resources/warranty 2017 KM LTN 17760 Rowland Street ity of ndustry, 91748 626-968-5666 Page 4