NEED HIGH RESOLUTION LOGO 1. Product Name Aladdin Light Lift 2. Manufacturer 61 Shields Road Huntsville, AL 35811 Phone: 256-429-9700 Fax: 256-429-9708 Email: chad@aladdinlightlift.com Web: www.aladdinlightlift.com 3. Product Description Basic Use For more than 25 years, has manufactured self-contained motorized winches engineered to raise and lower high bays, chandeliers and other lighting fixtures. The UL-listed lifts, available throughout the United States, Asia, Canada, Europe, Australia, Central America and South America, are suited for both new and existing construction. Aladdin Light Lifts lower high, hard-to-reach lighting to any height necessary for installation, maintenance or cleaning. In standard installations, the lift is installed directly above the light fixture; offset and remotely-mounted models are available when access above the fixture is limited. Aladdin Light Lifts are controlled by keyswitch or optional Smart- Lift. A controller option lowers as many as 25 Aladdin Light Lifts individually or simultaneously simplifying access and eliminating the need for scaffolding in high bay installations. Capable of supporting as much as 1000 lbs, Aladdin Light Lifts are ideal for plenum space installations and open air warehouses, hangars, office buildings, churches, gymnasiums and auditoriums. Types, Sizes See Table 1. Color, Finish Chassis and commercial model enclosures are laser cut and galvanized. The winch and pulley are zinc plated. The aircraft cable is galvanized steel. 07 Caption Composition and Materials ALL200, ALL200-CM, ALL200RM, ALL200RM-CM, ALL300, ALL300-CM, ALL300RM, ALL300RM-CM Motor: 115 volts, AC/DC, 50/60 hertz, 1/15 hp, 1.3 amp Winch: 4/1 gear ratio, zinc plated Frame: Galvanized Cable: 1/8" galvanized lay cable Electrical: Circuit boards rated min V-0, conformal coated; all components and board are UL listed and regulated Wiring: lead free, RoHS compliant; all wiring and harnesses are UL listed and regulated 4. Technical Data Applicable Standards ASTM International ASTM C897 Standard Specification for Aggregate for Job- Mixed Portland Cement-Based Plasters ALL700, ALL700-CM, ALL700RM, ALL700RM-CM, ALL1000, ALL1000-CM, ALL1000RM, ALL1000RM-CM Motor: 115 volt, AC, 60 hertz, 1/9 hp, 1.4 amp Winch: 15.4/1 gear ratio, zinc plated Frame: Galvanized Cable: 7/32" galvanized lay cable Electrical: Circuit boards rated min V-0, conformal coated; all components and board are UL listed and regulated Wiring: Lead free, ROHS compliant; all wiring and harnesses are UL listed 1
Table 1 Types and Sizes Model Application Lift Capacity Voltage Light Capacity Winch Cable Controller Controller Wire Dimensions Weight ALL200 Residential 200 lbs Option: 14" W x 19" L x 9" H 47 lbs ALL200-CM 200 lbs Option: ; ; 14" W x 20.5" L x 9" H 57 lbs ALL200-RM Residential 200 lbs Option: 14" W x 18" L x 9" H 57 lbs ALL200RM-CM 200 lbs t Option:, 14" W x 20.5" L x 9" H 67 lbs ALL300 Residential 300 lbs Option: 14" W x 19" L x 9" H 47 lbs ALL300-CM 300 lbs Option: ; 14" W x 20.5" L x 9" H 57 lbs ALL300-RM Residential 300 lbs Option: 14" W x 18" L x 9" H 57 lbs ALL300RM-CM 300 lbs Option:, 14" W x 20.5" L x 9" H 67 lbs. ALL700 Residential 700 lbs Option: 18" W x 27.5" L x 9" H 96 lbs ALL700-CM 700 lbs Option: Std: ; Option: 18" W x 29.5" L x 9" H 110 lbs ALL700RM Residential 700 lbs Option: 18" W x 27.5" L x 10" H 111 lbs ALL700RM-CM 700 lbs Option: Std: Option: 18" W x 29.5" L x 10" H 125 lbs ALL1000 Residential 1000 lbs Option: 18" W x 27.5" L x 9" H 98 lbs ALL1000-CM 1000 lbs Option: Std: ; Option: 18" W x 29.5" L x 9" H 112 lbs ALL1000-RM Residential 1000 lbs Option: Option: 100' 18" W x 27.5" L x 10" H 113 lbs ALL1000RM-CM 1000 lbs Option: Std: Option: Multi- Lift Option: 100' 18" W x 29.5" L x 10" H 127 lbs 2
Options Controller A touch panel unit that can automatically stop the lift at a desired height and then automatically stop at the ceiling when being raised Key-Switch Controller A controller that operates the light lift with the turning and holding of a key Controller A wall mounted, LCD Control Panel designed to operate up to 25 daisy-chained light lifts within a single room Voltage and residential models are light and motor packages. models are available with 208V, 240V or 277V Sloped ceiling adapter Torque reel mount and residential applications Configurations Aladdin Light Lifts are available in standard mount and remote mount, residential and commercial configurations. See Table 1. Benefits Allows safe and efficient light fixture service at floor level without the need for ladders or scaffolding Raises and lowers lighting with easy-to-use, single-switch or touch pad operations Reduces liability and cost of high bay maintenance Supports fixtures up to 1000 lbs Suited for residential and commercial installations UL and ULC listed Restrictions Mount lifts in a dry, accessible indoor location Do not install in an indoor pool area Install only with a single point hanging light fixture Do not transport humans or objects other than light fixtures Do not modify or install lifts with horizontal cable directional changes; all pulleys should be mounted in the same vertical plain Separate light and motor circuits 4. Technical Data Applicable Standards Canadian Standards Association (CSA) CSA-C22.2, No. 33 Construction and Test of Electric Cranes and Hoists Conformité Européenne/European Conformity (CE) European Committee for Standardization, European Committee for Electrotechnical Standardization Underwriters Laboratories (UL) UL 1340 Standard for Hoists CSA-C22.2, No. 33 Safety Code for Material Hoists Approvals, Certifications All models are UL listed for the U.S. and Canada 240 volt models are UL, ULC listed and additionally comply with CE standards Technical and Mechanical Properties Winch ALL200, ALL200-CM, ALL200RM, ALL200RM-CM, ALL300, ALL300-CM, ALL300RM, ALL300RM-CM winch: 4:1 gear ratio ALL700, ALL700-CM, ALL700RM, ALL700RM-CM, ALL1000, ALL1000-CM, ALL1000RM, ALL1000RM-CM winch: 15.4:1 gear ratio Electrical Conductivity Performance Wiring is lead-free and RoHS compliant All wiring and harnesses UL listed and regulated All units are hi-pot tested and built within local electrical code: UL listed for the U.S. and Canada Circuit boards rated min V-0 and conformal coated Components and board are UL listed and regulated 3
Standard mount Remote mount Flamespread/Smoke Performance Electrical contact plates and circuit board are 94VO; plastic enclosure on residential models are HB per UL Weight-bearing Information All models are 4:1 static weight bearing Motor Voltage, HP: ALL200, ALL200-CM, ALL200RM, ALL200RM-CM, ALL300, ALL300-CM, ALL300RM, ALL300RM-CM: 115 volt, AC/DC, 50/60 hertz, 1/15 hp, 1.3 amp ALL700, ALL700-CM, ALL700RM, ALL700RM-CM, ALL1000, ALL1000-CM, ALL1000RM, ALL1000RM-CM: 115 volt, AC, 60 hertz, 1/9 hp, 1.4 amp All models are lead free, ROHS compliant; all wiring and harnesses UL are listed and regulated 5. Installation Preparatory Work Deliver product in manufacturer's original, unopened, undamaged containers with identification labels intact. Store protected from exposure to harmful environmental conditions, frost-free and at temperature and humidity levels recommended by the manufacturer. Line voltage should be supplied for both light circuit and motor circuit. Also, location of fixture should be decided. Precautions Aladdin Light Lifts must be installed by licensed electricians and the installation instructions provided with each lift should be methodically followed. Methods For installation detail, refer to the manufacturer's instructions for the selected model or visit www.aladdinlightlift.com. Building Codes Ensure installation complies with the requirements of all applicable local, state and federal code jurisdictions. 6. Availability and Cost Aladdin Light Lifts are available worldwide. The product typically ships within 1-2 days and is in the hands of the end user within a week. Contact Aladdin Light Lift for availability and cost information within a specific region. 4
7. Warranty warrants its light lift unit for one year from the date of purchase. The warranty includes all parts, provided the unit is installed properly by a licensed electrician. Labor charges will be the responsibility of the purchaser. 8. Maintenance Aladdin Light Lifts require only occasional visual cable inspection by the facility manager or building/home owner. Aladdin Light Lifts should be serviced by licensed electricians. Technical support is available from the manufacturer, Monday- Friday, 8-4 CST. For questions or assistance, visit the Aladdin Light Lift website, www.aladdinlightlift.com or call the toll-free tech support number: 877-287-4601. 10. Filing Systems CMD Group CE UL (U.S. and Canada) Additional product information is available from the manufacturer upon request 9. Technical Services Technical assistance, including detailed information, product literature, test results, project lists and assistance in preparing project specifications is available from 5