Meter Leveling Saddles Meter Level Saddle is an accepted means to support chart recorders on meter runs or as an economical means to support pipe runs. Rugged Ductile Iron Construction Standard " Meter Mount: Fits all Sizes Multiple Pipe Sizes: ", ", 4", 6" & 8" Size.............................. ", ", 4", 6" and 8" Saddle................................ Ductile Iron Mount................................. Ductile Iron U-Bolt................................ A07 GR. B Determining the Model Number Example given: Standard Model MLS Series MLS, " Leveling Saddle Size " " 4 4" 6 6" 8 8" MODEL MLS MLS Meter Leveling Saddle Dimensional Data Model and Part No. Model Part No. MLS 0000-687 MLS 0000-69 4MLS 0000-70 6MLS 0000-7 8MLS 0000-79 0 WellMark Company, L.L.C. Litho USA WMACCESS/LS-/09 All registered trademarks are the property of their respective owners. 6 /8 " Item Description Qty. Part No. " " 4" 6" 8" SADDLE, DUCT. IRON 0008-404 0008-4 0008-40 0008-48 0008-0 U-BOLT, A-07 GR.B 000-4967 0008-46 0008-479 0008-487 0008-49 WASHER, STEEL 06000-078 4 HEX NUT, A-07 GR.B 0000-04 METER MOUNT, DUCT.IRON 000-044 6 SQ. BOLT, A-07 GR.B 0000-7 NUT, A-07 GR.B 0000-999 7 6 4
Fuel Gas Shut-Off Valve Fuel Gas Shut-Off Valve is for use in fuel gas scrubbers on gas production units, indirect line heaters, heater treaters, etc. Operation float buoyancy lifts an elastomer plug to shut off gas flow to burner when the liquid level reaches a predetermined height. Connections.............................. " x " Std. (others available) Working Pressure............................. 0 psi Body................................. Forged Steel Float.................................. x S.S. Example Given: FGSVFS (others available) Description Type/Size FUEL GAS SHUT-OFF VALVE FGSV FLOAT " X " BODY FORGED STEEL FS FOR VARIATIONS SPECIFY In-Service Test Tool An in-line device installed between a safety relief valve and a presssure vessel for in-field testing of pressure settings and/or seat leakage. Operation A hydraulic pump or Nitrogen bottle, with a flexible hose, gauges, and needle valves can be attached to the connector nipple, and the relief valve can be tested to determine if the set pressure is correct without taking the line out of service, or removing the valve from the line. CAUTION: Never use Oxygen. Connections.............................. " x " /" x /", x Body................. Carbon or Stainless Steel (Specify) Seat............................... Durable Plastic Ball.................................... Stainless Connector Nipple........................... Stainless Example Given: ITT-C Description IN-SERVICE TEST TOOL ITT Process Connection " /" Body Material CARBON STEEL C STAINLESS S 0 WellMark Company, L.L.C. Litho USA WMACCESS-/09 All registered trademarks are the property of their respective owners.
Probe and Plug Pressure Provers For fast, on-location, pressure checks. Use on wellheads, on flow lines and on pressure vessels, or wherever repetitive pressure readings are taken. Stainless Steel Eliminates the Requirement of Multiple, On Site, Expensive Gauges Field Repairable Plug Repair Kit No Special Tools Required for Repair 000 psi Working Pressure Pressure Prover Part No. Model No. PLUG ASSEMBLY 07 M0FSS PROBE ASSEMBLY (/") 06 F0SS PROBE ASSEMBLY (/4") 0 FSS Item Description Part No. PROBE (COMPLETE) 06 PLUG BODY 08 PLUG REPAIR KIT 08 Gauge Not Included /" or /4".8.7 /" /4" LevelGlas For use with in-line level control connections in order to show visual liquid level over a small area, or wherever small area visual sight of liquid is required. Temperature........................... 80 F Maximum Working Pressure............. 000 psi Maximum @00 F Process Connection..................... " Screwed Body............................... Stainless Steel Lens..................................... Lexan O-Ring................................... Buna-N Example Given: LGTL Description SERIES LEVELGLAS LG Process Connection " SCREWED T 0 WellMark Company, L.L.C. Litho USA WMACCESS-/09 All registered trademarks are the property of their respective owners.
Blind Flange Assemblies (Closures) and Weld Necks Weld Necks or Nozzles se are offered in ", 4", ", 6" and 8" pipe sizes, screwed by weld end. Standard material is SA06 Gr. B Pipe. Blind Flange Assemblies (Closures) A blank process body, hammer union and a weld neck makes an excellent blind flange. This permits easy field installation of a second control on vessels having two or more nozzle openings but initially shipped with only one control. Blind Flange Assemblies Standard Straight Pipe Threaded (NPSL) Size x Lg. Pipe Schedule Pipe O.D. Wall Thickness W.P. (psi) Wt. (Lb.) Part No. " X " SCH. 60.00.48 00 0 0000-9 " X 8" SCH. 60.00.48 00 0000-94 4" X " SCH. 60 4.00. 00 7 0000-90 4" X 8" SCH. 60 4.00. 00 0000-968 " X " XX STRONG.6.70 00 8 0000-976 " X 8" XX STRONG.6.70 00 7 0000-984 6" X " SCH. 60 6.6.79 00 8 0000-008 6" X 8" SCH. 60 6.6.79 00 49 0000-06 8" X " SCH. 00 8.6.94 00 64 0000-904 8" X 8" SCH. 00 8.6.94 00 7 0000-06 ACME Threaded Size x Lg. Pipe Schedule Pipe O.D. Wall Thickness W.P. (psi) Wt. (Lb.) Part No. 4" X " SCH. 60 4.00. 00 7 0000-8 4" X 8" SCH. 60 4.00. 00 0000-84 " X 6" XX STRONG.6.70 00 0000-789 " X 8" XX STRONG.6.70 00 7 0000-868 8" X " SCH. 00 8.6.94 00 64 0000-900 Weld Necks (W.P. 00 psi) Standard Straight Pipe Threaded (NPSL) Size x Lg. Pipe Schedule Wt. (Lb.) Part No. " X " SCH. 60 7 00-00 " X 8" SCH. 60 0 0074 4" X " SCH. 60 0 00-468 4" X 8" SCH. 60 000-799 " X " XX STRONG 00-8 " X 8" XX STRONG 00 6" X " SCH. 60 9 000-8 6" X 8" SCH. 60 0 00-6 8" X " SCH. 00 000-889 8" X 8" SCH. 00 4 00-74 ACME Threaded Size x Lg. Pipe Schedule Wt. (Lb.) Part No. 4" X " SCH. 60 0 00-06 4" X 8" SCH. 60 00-694 " X 6" XX STRONG 7 00-9470 " X 8" XX STRONG 00-0 4 0 WellMark Company, L.L.C. Litho USA WMACCESS/BLFL-0/0 All registered trademarks are the property of their respective owners.
WTA In-Line Check Valve WellMark In-Line Check Valve is for liquid, air, gas, vapor or steam service. It is also suitable for injection lines, such as chemical and lubrication. standard spring opens with 0 psi flow pressure. Choice of Body Material: 6 S.S. or 60 Brass Viton O-Ring, Std. (EPR included separately for methanol service.) 6 S.S. Spring and Ball, Std. /" Connection Size Available Dimensional Data Item Description Qty. Part No. OUTLET BODY, 6 S.S. 06 OUTLET BODY, 60 BRASS 06 SPRING, 6 S.S. 0606 BALL, 6 S.S. 060 4 O-RING. VITON 0608 INLET BODY, 6 S.S. 064 INLET BODY, 60 BRASS 06 7 /8" Flow /4" 4 Model Connection W.P. Material WTA-676 /4" FXM 000# MAX. 60 BRASS WTA-67 /4" FXM 6000# MAX. 6 S.S. 0 WellMark Company, L.L.C. Litho USA WMACCESS/WTA-0/0 All registered trademarks are the property of their respective owners.