The HDS CNC Router is manufactured using global state-of-the-art techniques with advanced engineering and workmanship and built to last with all steel construction and superior components such as precision linear bearings and rails. Key features are a 12 HP HSD high frequency automatic tool changer spindle that comes complete with a pneumatically retractable vacuum hood, a multi-zone vacuum t-slot table, a precision helical rack-n-pinion on the X and Y axes with a ballscrew Z axis drive and PC based Osai industrial CNC controller with easy to use system interface. High-powered maintenance free brushless AC servo motors and Delta drives provide efficient, powerful, fast and accurate motion. All of the electrical components are housed, wired and tagged in a doubled-door Nema enclosure and are easily accessible. Increased production capabilities with the highest cut quality, minimal maintenance and long lasting machine longevity make these machines perfect for high volume production shops and have been purchased for multiple installations. High-Quality * Cut Extraordinary Value & Performance Since 1986, Techno, has provided economical CNC cutting solutions. The new HDS Series promises to follow suit. * High Polished Routing Quality 12 HP HSD high frequency automatic tool changer spindle Maintenance free brushless AC servo motors and drives 4-Zone vacuum t-slot table Pneumatic material placement stops Hand-held pulse generator with rotary hand wheel controls the axis selected PC with flat screen monitor, keyboard and mouse Easy to use Techno CNC Interface Open architecture works with all industry standard CAD/CAM software
CONSTRUCTION FEATURES Smooth Play-Free Motion Superior Cut Quality Minimal Maintenance Machine Longevity Spindle The HDS Series machine comes standard with a 12 HP HSD high frequency automatic tool changer spindle. This precision spindle requires no maintenance, uses industry standard ER collets and ISO 30 tool holders, is fully programmable with speeds from 6000 to 24000 RPM, and comes complete with a pneumatically retractable vacuum hood. Gantry The gantry is constructed of tubular steel with reinforcing ribs welded throughout the length of the column which results in a steady firm beam assembly. This quality engineering and workmanship result in smooth precision cutting. Gantry Support (Uprights) The Gantry uprights are cast iron with heavy duty gussets formed into the casting. Each support is machined for housing the various drive assemblies including motors, bearings, belts, and wiring harnesses. Base Frame The base frame is fabricated from heavy-duty tubular steel that is welded, precision machined and stress relieved so that the foundation remains true and steady over the operational life of the machine. Tooling The HDS Series machine includes an 8-position tool rack in the rear of the machine. The position of this rack allows for easy loading and unloading of material from either side of the machine.
CONSTRUCTION FEATURES Smooth Play-Free Motion Superior Cut Quality Minimal Maintenance Machine Longevity Drive Motors The HDS Series CNC Router utilizes AC Servo motors powered by Delta Drives. These motors require no regular maintenance therefore, reducing any maintenance downtime. Drive Train Assembly The Techno HDS Series CNC Router uses precision helical gear racks on the X and Y axes. The mounting of the rack is inverted to help keep dust and debris from building up on the drive system, this assures smooth motion and long term reliability. The precision gearbox is directly coupled to the Servo motor and pinion. This eliminates belt stretch inaccuracies assuring high-speed machining while the system positions the spindle accurately. Tool Calibration Automatic tool calibration pad allows for easy and accurate Z zero position for single and multiple tool changes through the program. NEW CNC Machine Tool Holder Clamp The Techno HDS CNC Machine comes equipped with a tool holder clamp fixture, providing a much easier way of inserting and tightening the CNC router bits into your tool holder. This method is safer and easier than using the common procedure of tightening the collet nut with two wrenches while the tool holder is still in the spindle. Pneumatic Material Alignment Stops The HDS Series machine comes standard with three material pneumatic alignment stops. These pins allow the operator to bank the edge of the material against them precisely aligning the material to the machine origin.
Control Panel Functions Hand-held Pulse Generator The Rotary hand wheel, attached to the machine, will control the axis that is selected on the wheels dial. The Setup Introduction manual provides information that will have users cutting parts in minutes. Electronics All the electrical components are housed and wired in a doubled-doored Nema 4 electrical enclosure. This allows for easy access and service when needed. All wiring is tagged so that when service is required, the customer can easily navigate the cabinet. In addition, the cabinet serves as a work bench for the tools required. * T-Slot Profile Vacuum Table The vacuum plenum table surface is multi-zoned which allows the operator to easily switch from full sheet processing to smaller part processing, (which requires a smaller segmented area). Zones can be turned off easily via control valves on the front of the machine. Gasketing can also be routed to accommodate various material sizes and styles. HDS Series includes a heavyduty aluminum T-Slot profile in multiple locations across the table surface. This T-Slot accepts Techno s square M6 T-nuts. Vacuum Pump (1) 8.8 HP TEFC (totally enclosed fan-cooled). Rotary Vane Vacuum Pump Available in 230/460V, 50-60Hz, 3 ph or single phase Comes standard with motor starter, vacuum gauge, primary and secondary filter, check valve and all necessary plumbing to connect to Techno CNC Routers Rated for 173 CFM, 25 Hg, 81dB for very quiet operation
Techno CNC HDS G-Code Osai Interface Techno s CNC HDS Windows-Based G-Code Osai Interface is included with each machine and is an indispensable tool in any CNC Router application. Its open architectural design accepts G-Code files from any industry standard CAD/CAM software package, and can operate using inch or metric units and is highly customizable to better suite your needs. Customers that are new to automation find the Techno CNC Interface easy to learn and operate. Most are up and running in less than one day of training. They find the intuitive design and functions easy to use and remember. The most fundamental controls and displays are all visible on the main page. Customers soon discover that just because the Techno CNC Interface is easy to use, it does not mean that it is not a comprehensive CNC program. Several impressive features include: Full automated tool length offset cycle Remote access Intuitive design and operation Skip functionality Highly Customizable Built-in editor for shop floor modifications Machine feed rate and spindle override control Continuous step jogging, or convenient hand-held pulse generator can be used to fine tune positional locations CNC NC code previewer I/O machine status display Convenient vacuum pump switches on interface Real time file execution Techno also offers FREE updates, via support.technocnc.com for the life of the machine.
Why does the industry love this machine so much? July 2014 I would like to thank you for all your assistance with my purchase of the Techno HDS machine. This has been a great asset to my business. Production has been greatly increased and has increased quality performance in our cabinetry department. Your staff has been helpful with our training on site as well as on the phone. I would recommend this machine to my fellow cabinet peers, Steven Mills East Coast Cabinetry, Inc. January 2013 Techno CNC Router Systems proudly announces that their High Volume Plastics Routing Customer takes advantage of the 2013 Section 179 Tax Law by installing his 4th CNC Router and is happy to report that they plan on adding two more new HDS machines this year! *Midwest customer purchased 4 Techno HDS machines for their plastics fabrication.
Hand-held pulse generator 12 HP HSD automatic tool changer spindle PC interface Z axis Gantry is constructed of tubular steel Pneumatic operated vacuum hood Keyboard Multi-zoned vacuum T-slot table surface T-slot Profile Forklift tube Zones can be turned off easily via control valves on the front of the machine All steel construction We offer affordable systems to automate any size production shop. Small Investment, Big Return - See more at www.technocnc.com. Sign Making Musical Instruments Wood Working Plastics Foam Prototyping Model Making Education General Fabrication Dimensions in inch Machine Process Area* Gantry Cut Rapid Foot Print Model X Y Z Height** Speed Speed W L H 4848 50 50 7.5 7.5 1000 1500 78 71 60 4896 50 97 7.5 7.5 1000 1500 78 129 60 60120 61 121 7.5 7.5 1000 1500 90 147 60 60144 61 145 7.5 7.5 1000 1500 90 171 60 *Other sizes available upon request. **Other gantry heights available upon request.