Authorised Dealer Important: * RPM indicated is at no load. * Watts indicated at rated input. * Rated Voltage 220/240 Volts. * Rated Frequency 50 Hz. A.C/D.C * Product Pictures and illustrations are as true as possible but not binding. * Accessories shown in the pictures may not be the part of actual equipment. * In the interest of continual improvement, NIPPON reserves the rights to alter its product design or change specification without prior notice. * Symbol denotes, Double Insulation Carry Case Variable Speed Spindle Lock Mfg. By: Nippon Electrical Industries. (INDIA) Reverse & Forward Axis: 9723430047/44 www.nipponpowertools.com facebook.com/nipponpowertools www.nipponpowertools.com facebook.com/nipponpowertools
Drills / Impact Drills Drills / Cutter Small pistol drill with metal body gear cover for light engineering & wood working applications. D-10 10 MM Drill 350 W, 2700 RPM, 1.5 Kg Wide range of applications particularly in light engineering & building industry. B2D 10 MM Light Duty Drill 240 W, 720 RPM, 2.6 Kg Hand held wonder, light screw driver that can also work as low RPM drill specially for metals. Truly meant for light fabrication & installation work. SD-10 10 MM Screw Driver Drill 300 W, 0~750 RPM, 1.4 Kg Suitable for general purpose continuous production work, construction & pest control work. B4D 10 MM Heavy Duty Drill 550 W, 1000 RPM, 4.4 Kg B5D 13 MM Heavy Duty Drill 500 W, 550 RPM, 4.4 Kg Powerful motor and low RPM makes it a true heavy duty drill suitable for continuous production work in tile, metal & wood. DU-10B 10 MM Heavy Duty Drill 650 W, 1250 RPM, 2 Kg Metal bodied & long life rugged drill, suitable for general purpose work in building, plumbing, light engineering and maintenance work. B6D 13 MM Light Duty Drill 450 W, 730 RPM, 4.8 Kg Suitable for general purpose production and masonry work. Powerful motor and selectable impact action make it useful to work even on overhead walls or materials like concrete, stone or bricks. EIB-13 13 MM Impact Drill 750 W, 1800 RPM, 2.1 Kg Heavy duty drill with light weight engineering plastic body is ideal for heavy duty work. Two handle holding arrangement and bracks plate make them ideal for deep drilling jobs. 14130B 13 MM Heavy Duty Drill 750 W, 750 RPM, 4.5 Kg Useful for light engineering and wood working applications. B1D 6 MM Light Duty Drill 240 W, 2900 RPM, 2.2 Kg CM4B 110 MM Cutter 1200 W, 12000 RPM, 2.8 Kg
Heavy Duty Drills / Router Ideal for maximum capacity heavy duty drilling. Also as a driving unit of cylinder honing equipment in structural engineering work. Useful for rail workshops, shipyards etc. BD-1115MT 23 MM Heavy Duty Drill 1100 W, 500 RPM, 7.8 Kg Also available in Chuck model BD-1115c for capacity up to 19 MM in Steel Blowers Suitable for cleaning of dust & for plant maintenance. It can also be used as a vacuum cleaner. 3 B-20 Blower 2.3 M /Min 335 W, 13000 RPM, 1.8 Kg Useful for general heavy duty work and also in structural engineering. B8D 13 to 23 MM Heavy Duty Drill 600 W, 560 RPM, 8 Kg Also available in Chuck model B8Dc for capacity up to 20 MM in Steel It can be used for general cleaning of machineries as it prevents machine deterioration due to dust, grit & swart. B-21 Blower 3 360 W, 1.55 M /Min, Nozzle air velocity 310 kmph, 4.7 Kg It can be used for production line drilling in heavy engineering works, Shipyards, Mines, Railways & Transport workshops. It can also be used for honing & line boring purpose. Universal Magnetic Drill Stand BW-10 31 MM Heavy Duty Drill 1100 W, 350 RPM, 9 Kg V type slide for elongated life Powerful Electro Magnet for rigid clamping on job Useful for general heavy duty work in structural engineering, Shipyards, Mines, Railways and Transport workshops. It can also be used for honing & line boring purpose. B9-1 25 MM Heavy Duty Drill 660 W, 380 RPM, 10.6 Kg B9-2 31 MM Heavy Duty Drill 850 W, 280 RPM, 10.6 Kg Brass Sheet installed in guides ensures precision for long life Company Name Universal Adaptor to be used to adjust varietyof Drills Suitable for Model / Size Safety Chain for horizontal & overhead drilling Power packed wood working tool useful for planing, molding, sanding, drilling, grooving, jigsawing, copying, rebating, carving etc. BR-8 8 MM Router 1200 W, 23000 RPM, 4.6 Kg Assembly with NIPPON Drills (Optional) MDS-200 Heavy Duty Magnetic Drill Stand Base Dia 200 MM, Height 520 MM, Stroke 275 MM, Current Draw 150 Watts, Magnet Pull 1000-1200 Kgf* * Min. 3/4 thickness plate to be used for better pull as it varies with the thickness of job.
Magnetic Broach Cutters Hammers Two epoxy sealed high frequency electro magnet poles Selectable hammer action, variable speed and safety release clutch mechanism makes it a most versatile rotary hammer. Slide action chuck is easy for bit installation & removal. It is a boon for professionals in construction & building industry. G2-20B 20 MM Rotary Hammer 700 W, 0~1050 RPM, 2.6 Kg Dial for precision adjustment of working stroke v type slide for elongated life Cap to protect spillage of water or coolant while topping up Comparison of Broach Cutter Versus Regular Drill Most compact yet light weight demolition hammer with slide action chuck for easy bit installation & removal. The soft rubber grip and anti-vibration spring on rear handle provides reduced operator fatigue. It has number of usages for demolishing concrete & masonry in construction and building industry. B810T 5KG Demolition Hammer 900 W, Hex Shank 17 MM, Rate of Impact 2900 Blows Per Min., Overall Length 428 MM, 5.5 Kg Extreme impact force of up to 25 J and variable speed makes it the specialist tool for breakthroughs & demolition work. Low vibration and no-load low feed pressure for fatigue-free working. Variable chisel fitting in 12 angle positions, wide sliding switch & 360o rotating auxiliary handle adds to the convenience. B11E 11 KG Demolition Hammer 1500 W, SDS Max Tool Holder Rate of Impact 900~1890 Blows Per Min., 6-25 Joules Impact Force, 10.1 Kg Broach Cutter only cuts a slot hence cutting work is shortened by one third. The remaining core is a solid cylinder which has more value than mere chips. Regular Drill cuts the entire hole hence it uses up to 3-5 times greater working time. Finally the chips are formed which has less scrap value than solid cylinder. Just by removing Broach Cutter adopter this model can easily turn in to Regular Drill Press Demolition Hammer with efficient weight to power ratio & comfortable shock absorbing handle. Useful for breaking up concrete & rock, digging clay and much more in construction space. BH65 15 KG Demolition Hammer 1240 W, 30 MM Hex., Rate of Impact 1400 Blows Per Min., 39.5 Joules of Impact Energy, 15 Kg
Armatures Because of its low price & good quality, Nippon Armatures are accepted by India s renowned companies like, RELIANCE * ESCORTS * STEEL CAST * BAJAJ LTD. * HINDALCO * GRASIM * NATIONAL BOILER * KELVINATOR * BHEL * JINDAL * DODSAL * SCOOTERS INDIA etc Cut-Off Machines Both these cut-off machines are suitable for cutting off round bars, pipes, shaped steel tubing, conduit and channels etc. LB355 355 MM Cut-Off Machine 2000 W, 3800 RPM, 16.4 Kg BU-14 355 MM Cut-Off Machine 2000 W, 3700 RPM, 17.5 Kg Nippon Suitable to Model Nippon Suitable to Others Suitable to HITACHI, ELECTREX, PLANET, LG & Others Nippon Suitable to ND-10 D-10 YKING 2310 Suitable to Others Model Nippon N-46 DU-10B/EIB-13 HITACHI, PLANET Suitable to WOLF & Others N-27 CM4B HITACHI CM4SA N-1 B-1D WOLF EG2C N-37 C-7B HITACHI C7 N-2 B-2D WOLF EJ3C N-42 B-20 HITACHI PB-20 N-4 B-4D WOLF WD3C/WD23C N-33 PD-100B HITACHI PDA 100D N-5 B-5D WOLF WD34C NG15B G15SB HITACHI G13SC2/G15SA2 N-6 B-6D WOLF SD4C NG18B G18SB HITACHI G18SH2 N-7 ------ WOLF TS35C NBH65 BH65 HITACHI PH-65A N-54 14130B WOLF 14130 N-36H BU-14 HITACHI HU-14 N-8 B-8D/B-8DC WOLF WDH/WDHC NL355 LB355 LG355 N-9B B9-1/B9-2 WOLF NW8/NW10-AR NSC14 SC14R CC14SF N-9 ------ WOLF NW8/NW10 N-36 ------ NEUTRON NU-14 N-10 B-10G1/G2 WOLF FF2, FSG2 N-56 BR-8 ELMICO ER-8 N-11 B-11G WOLF HSG Suitable to BOSCH, DeWALT, MAKITA N-12 ------ WOLF GL3 N6-100 - BOSCH GWS6-100 N-13 B-13G WOLF GQ4 ND801 D801B DeWALT DW-801 N-14 B-14G WOLF GQ6 N2-20 G2-20B BOSCH GBH 2-20R N-16 ------ WOLF AG7/AG9 N810T B810T MAKITA HM0810T N-16B BG-7/BG-9 WOLF AG7/AG9/BR NB11E B11E BOSCH GSH11E N-19 ------ WOLF VSM Suitable to KPT N-20 ------ WOLF HS7 N-45 KB-561/563 KPT-561/563 N-20B HS7B WOLF HS7-BR N-52 B-55-02 KPT P-55-02 N-21 B-21 WOLF NWB N-26 COBRA-7B KPT P57-91/P59-91 N-47 GB-2 ------ N-43 BD-1285 KPT HD-1285 N-55 SPB-180 ------ N-1115 BD-1115MT/c KPT HD-1115 N-58 CAPTAIN-14 ------ N-BW10 BW-10 KPT KW-10 Flexible Shaft Grinders BR-2 Single Speed Gear Machine 1 HP, 3 Ph, 400/440 V, 12000 RPM Supplied without (shaft & tool holder) B-10G1 Flexible Shaft Grinder (Single Speed) 380 W, 12000 RPM, 8.6 Kg B-10G2 Flexible Shaft Grinder (Double Speed) 380 W, 8.8 Kg Speed: Grinding 12000 RPM, Milling 1250 RPM Both these grinders have induction motors, so even on full load conditions speed doesn t drop & better utilization for grinding media can be done. BR-1 Single Speed Gear Machine 1.5 HP, 3 Ph, 400/440 V, 5800 RPM Supplied without (shaft & tool holder)
Die Grinders / Sanders / Planer / Circular Saw Suitable for finishing wooden surface and for removing old coats of paints, rust etc. Also useful in steel furniture/sheet metal fabrication and other industries for sanding & polishing purpose. OSB Orbital Sander Sanding Pad Size 115 X 225 MM 250 W (0.33 HP), 3000 RPM, Sanding Stroke 5 MM Orbits, 4.2 Kg Used for die grinding and I.C engine valve seat grinding. Also suitable for hand work grinding. Grinders Combination Combination of high power of high & power high speed & high having speedversatile having uses versatile in cutting, uses in grinding cutting,and grinding weld dressing and weldwork. dressing Low headwork. gear box Low for head ease gear of box workfor in ease confined of work areas in and confined tool-free areas adjustable and tool-free guardadjustable for easily guard for easily changing positions. D801B 100 MM Angle Grinder 800 W, 11000 RPM, 1.8 Kg Kgs Grinder having low gear head for tight work areas, Dust proof construction for prolonged life and most powerful motor. It is considered for its compactness and maneuverability in major grinding applications. B11G High Speed Grinder 310 W, 16500 RPM, 2.1 Kg G13SB 125 MM Disc Grinder G15SB 1200 W, 8500 10000RPM, RPM,32.7 Kg Kgs GB-2 25 MM Die Grinder (6 MM Collet) 400 W, 25000 RPM, 2.1 Kg G18SB 180 MM Disc Grinder 2000 W, 8500 RPM, 5 4.3 KgKgs Both these sanders are known for the heavy duty sanding work in fabrication workshops, coach building, ship building & appliance finishing workshops. With the optional cup wire brush and polishing bonnet, these grinders can be used for derusting, de-burring & polishing. BD-1285 180 MM Sander Polisher 1100 W, 5800 RPM, 6.6 Kg HS7B 180 MM Horizontal Sander 1000 W, 5300 RPM, 5.9 Kg Most Sturdy & high performance metal bodied grinder having lightest weight in its category. is Most Sturdy & high performance metal bodieditgrinder extremely desired in heavy weld dressing work, foundry having lightest weight in its category. It is extremely grinding in cutting-off risers and foundry runners.grinding It has desired inand heavy weld dressing work, extra long life because of hardened spiral bevel and in cutting-off risers and runners. It has extragears. long COBRA-7B 180 MM High Speed Angle Grinder life because of hardened spiral bevel gears. 2000 W, 8000180 RPM, 6.9High Kg Speed Angle Grinder COBRA-7B MM 2000 W, 8000 RPM,High 6.9 Kgs COBRA-9B 230 MM Speed Angle Grinder 2000 W, 6000230 RPM, 7.1High Kg Speed Angle Grinder COBRA-9B MM 2000 W, 6000 RPM, 7.1 Kgs Constructed for heavy duty work for long life with lowest maintenance. Suitable for weld dressing, general grinding applications in sheet metal & light engineering works. With proper attachments it can be used for buffing, polishing and even for sanding efficiently. C7B 185 MM Circular Saw 1100 W, 5500 RPM, 4.2 Kg P20B 82 MM Planer 570 W, 15000 RPM, 3.5 Kg B13G 100 MM Straight Grinder 800 W, 5200 RPM, 5.6 Kg Kgs B14G 150 MM Straight Grinder 1200 W, 5800 RPM, 11.3 Kg Kgs