OUTDOOR CASES
GENERAL CHARACTERISTICS The ATOS case in the OUTDOOR range is designed specifically to withstand the most severe environmental requirements. The case provides full protection against very bad weather (rain and snow) through its high IP55 sealing level and its machined diamond-shaped roof. The cases are available in single or double skin versions. The double skin technology protects against the sun's rays and allows the outside walls to be changed around in the event of vandalism or an accident. An optional ventilation kit is available to limit temperature rises in the case if the equipment dissipates a great deal of power. The front door is fitted with a multi-point closing mechanical handle for added protection against vandalism. IK resistance level to mechanical shocks (EN 62262) = IK0. Full metal flush-mounted handle. The outside enclosure, door and roof are aluminium protected by pure polyester powder paint RAL 7035. Anti-graffiti varnish is offered as an option. The inside mechanics are in galvanised steel. The cases are fitted with four 9" inside uprights (compliant with standards CEA-30E and IEC-60297) machined in 9.5 mm squares with identification and numbering of U profiles to facilitate integration. The optional plinth is in stainless steel 304L with smooth, pure polyester paint RAL 7035 to combat corrosion. Stainless steel ensures maximum durability even if the paint is damaged during installation. RESISTANCE TO CORROSION Resistance to corrosion complies with standard ISO 2944-6, corrosiveness C4, HIGH durability. Anti-graffiti varnish or a second powder coat as an option achieves class C5-M or C5-I, still with HIGH durability (> 5 years). This resistance is confirmed by salt mist tests of 960 hours (C4) and 920 hours (C5-M). APPLICATIONS Energy, Rail, Fibre optics, Videosurveillance networks, Telecommunications.
The case comprises an outside aluminium structure painted with RAL 7035. It is fitted with reinforced crosspieces in galvanised steel. These support the four 9" inside uprights (adjustable to 25 mm intervals) and also ensure the rigidity of the case when being lifted or fixed to the ground in the event of shocks or vibrations. Permitted load: 300 kg. Vibration-tested as per standard EN 60068-2-6 (0.5 mm from 5 to 22Hz, 0.5g from 22 to 50Hz). Shock-tested as per standard EN 60068-2-27 (0gms vertical). The roof has diamond-shaped machining to allow for water runoff, with over-roof in double skin version. The case has two doors (front and rear) with multi-point closing lock rod and linkage in stainless steel 304L. 40 5 83 65 00 65 274 5 Cables can pass through two independent plates on the bottom. The cable I/O plates are in 3 mm-thick aluminium with anti-corrosion coating. 400 40 Option: Different /2 cylinder. (standard key 455E). 00 00 Retractable Zamak handle with interchangeable /2 cylinder + lock shield. 2 DECOUPES POUR PLAQUE PASSAGE CABLES DE 400 x 00 MM. 83 The door is fitted with an IP55 air intake filter with G4 DETAIL C effectiveness. ECHELLE 0,75 The rear door must be supplemented by an air outlet filter or by a set of fans + filter (see Options). By default, the doors have a right-hand opening but are available with left-hand opening upon request. 2x5 trs Ø3 27,5 545 27,5 600 740 In standard version, the case is fitted with: OPTION : - KIT VENTILATION - FRAM KIT A 600 486 44 57 467 full plate mounted on the front. machined plate mounted on the rear with pre-installed wireways. Staged membrane wireways 4 x Ø 5 to 7, 6 x Ø 0 to 22 + reserve 00 x 20. 749 45 TECHNICAL DATA 452 57
DIMENSIONS Note: Clarifications on the dimensions indicated in the table below: Height overall = Outside case height without eyebolts or plinth Working height = the area available for 9 equipment plug-ins. Upright height = the working height of the 9" inside upright. The first units (U) at the top and bottom of the upright cannot be used for plug-in equipment but remain available for 9 panels. Height Depths available from stock Width Working Upright Overall Single skin Double skin 9U U 622 mm 8U 20U 022 mm 24U 26U 289 mm 3U 33U available from stock available upon request COMPOSITION AND ITEM NOS. 2 4 painted aluminium outside enclosure. painted aluminium shade screen for the double skin version. painted aluminium front/rear doors with inside lining on double skin version. 9" inside uprights with depth crosspieces. bottom with two cable I/O plates. diamond-shaped roof with over-roof in double skin version. A rear panel version is also available. Height 9U/U 8U/20U 24U/26U 3U/33U Depth Single skin Double skin 400365 400366 400384 400385 400367 400368 400386 400387 400369 400370 40037 400372 400373 400374 400375 400376
OPTIONS PLINTHS Stainless steel 304L plinth with pure, smooth polyester paint RAL 7035. Two versions are on offer: Open version with two stringers placed sideways below the case Closed version comprising a belt with tamperproof closing plates (front and rear). Plinth height: 50 mm. Versions Depth Open Closed 400377 400378 400379 400380 40038 400382 EYEBOLTS Ref. 400320 Kit comprising four eyebolts M0 x 28. Extremely strong (Max. working load 700 kg). DOOR CONTACT SWITCH Ref. 400305 For open/closed door contact, automatic lighting or alarm sent to supervision unit. position switch ("O+C" bipolar snap-action contact). connection cable. fixing fasteners kit. LIGHTING Réf 400304 striplight with incandescent tube 8 W. protective cover in colourless polycarbonate. fixing part + fasteners. VENTILATION To limit rising temperature in the case. fan 50x72, voltage 230VAC, flow rate: 00 m3/h or 2 fans 50x72, voltage 230VAC, flow rate: 200 m3/h. ventilation control thermostat kit. fixing and electrical connection kit. Requires circuit breaker for protection Reference for fan 230VAC IP55 kit: Reference for 2 fan 230VAC IP55 kit: IP54 or 24 VDC version on request. 6000597 6000599
OPTIONS AIR OUTLET FILTER Ref. 400327 Filter G4 to be fitted on rear door for natural convection in the event of very low heat dissipation. HEATING To keep the case frost-free or prevent condensation. Elements fitted with fans for better convection. Are fixed directly to the 9" inside uprights. Fitted with a 3 x mm2 cord, 2 m long with plug. Requires circuit breaker for protection. 80 x 80 x 50/5W 9 /3U/ Depth85/250W 9 /3U/ Depth85/600W 600045 600046 600048 THERMOSTATS Are fixed to inside uprights. DIN rail. thermostat + terminals for supply. Element control thermostat Ref. 6000389 (A) High temperature warning thermostat Ref. 600039 (B) Low temperature warning thermostat Ref. 6000390 (B) A POWER BOARD B Réf 600072 For the connection and protection of equipment. power board. circuit breaker 6A for heating and ventilation. circuit breaker 6A 30mA. 3 connection terminals 25 mm2. Standard 9 France and Export sales and marketing departments 46 avenue des Frères Lumière - 7890 Trappes FRANCE Tel: 33 (0) 30 6 2 2 Fax: 33 (0) 30 6 2 22 E-mail: commercial@atos-racks.com Site: www.atos-racks.com C