DURO MANUFACTURING, INC. 3505 Arrowhead Drive Carson City, Nevada 89706 (775) 687-8866 FAX: (775) 687-8877
PART SA-01 SA-02 SA-03 SA-05 SA-06 SA-07 SA-08 SA-09 SA-10 SA-11 SA-12 SA-13 SA-14 SA-15 SA-16 SA-17 SA-18 SA-19 SA-21 SA-22 SA-23 SA-24 SA-25 SA-26 SA-27 SA-28 SA-29 SA-30 SA-31 SA-32 SA-33 SA-34 SA-35 SA-36 SA-37 SA-38 SA-39 SA-40 SA-48 SA-49 SA-52 SA-53 SA-54 SA-55 SA-56 SA-57 SA-58 SA-59 SA-60 SA-62 1/4" Swivel Assembly 3/8" Swivel Assembly 1/2" Swivel Assembly 1-1/2" Swivel Assembly Welding Swivel Assembly Heater Assembly Only Intermidiate Gear Roller Gude Assembly Side Roller Assembly Axle 1/2" Axle 1/2" Short Axle 3/4" Axle 1" Axle 1/2" Axle 3/4" Axle 1" Axle 1-1/4" Axle 1-1/2" Axle 1/4" Axle 3/8" 1/4" Swivel Assembly 3/8" Swivel Assembly 1/2" Swivel Assembly Disc 13-1/2" w/hub Disc 14" w/hub Disc 14" Alum. w/hub Disc 16" Alum. w/hub Disc Set 14" w/hub Disc Set 16" w/hub Disc Set 18" w/hub Disc Set 20" w/hub Disc Set 20" Disc Set 22" Disc Set Mounting Base (2000) 28.00 3 4 299.00 9 6 60.00 2 6 2 2 3 4 3 50.00 2 10.00 7 7 7 7 1 1 1 11 11 1 2 8 8 8 9 89.00 9 98.00 10 7 7 40.00 38.00 SA-64 SA-65 SA-66 SA-67 SA-68 SA-80 SA-81 SA-82 SA-83 SA-84 SA-85 SA-86 SC-030 SC-031 SC-032 SS-101 SS-111 SS-121 SS-141 SS-150 SS-161 SS-182 SS-201 SS-211 SS-241 SS-301 SS-311 SS-341 SS-342 SS-343 SS-352 SS-353 SS-362 SS-372 SS-384 SS-402 SS-442 SS-443 SS-453 SS-462 SS-472 SS-484 SS-494 SS-563 SS-583 SS-584 SS-603 SS-613 SS-623 SS-633 Disc Set 14" Electric Disc Set 12" (2200) Disc Set 16" (2200) Disc Set 12" (2300) Disc Set 15" (2300) Coll. Ring Assem. 40A Coll. Ring Assem. 30A Coll. Ring Assem. 45A Coll. Ring Assem. (2700) 3/4 H.P. Comp. Assem. 1 H.P. Comp. Assem. Light & Pole Kit Cable Assembly 50 Ft. Cable Assembly 75 Ft. Cable Assembly 100 Ft. 6 7 88.00 88.00 9 61 160.00 16 18 83 76 117 6 8 10 4 50.00 58.00 6 10.00 4 9 4 50.00 6 4 5 6 10 79.00 11 90.00 12 15 9 11 89.00 100.00 138.00 18 208.00 14 18 19 8 9 1 15
SS-643 SS-653 SS-663 SS-674 SS-801 SS-811 SS-821 SS-832 SS-855 SS-860 005-12 006-01 006-07 006-08 006-09 008-01 009-01 018-03 018-04 018-05 018-06 018-07 018-15 018-16 018-17 018-18 018-19 018-20 018-21 018-22 018-23 018-34 018-35 018-36 018-38 018-39 018-50 019-15 019-16 019-17 019-18 019-22 019-24 019-25 5/16" Acorn Nut 3/8" Keps Nut 3/8"-16" x 1-1/2" C/S 3/8" x 2" C/S GR 2 3/8-16" x 3" C/S 5/8-11" Hex Nut 3/4-10" Jam Nut 1245 3/4" Axle 1310 1/2" Axle 1315 3/8" & 1/4" Axle 3/8" & 1/4" Axle 1510 Axle Tie Rod 4-13/16" Tie Rod 6-13/16" Tie Rod 10-13/16" Tie Rod 9-7/8" Tie Rod 13-7/8" Tie Rod 17-7/8" Tie Rod 21-7/8" Tie Rod 13-11/64" Tie Rod 21-13/16" Bushing 1/2" x 1/2" Bushing 1/4" x 1/2" Bushing Nut Mount Nut, Aluminum 2510 Axle Electric Reel 2715 Axle Electric Reel Air Valve SLB 1/2" Connector Box UNY-105 Union GEMLB-1 Exp. Proof Box Pressure Switch Timer (Infitec) Timer (Adjustable) 019-26 Compressor 1 H.P. 90.00 10 17 4 68.00 8 9 11 1.35.25.24.31.42.40.54 2 9.00 8.00 1 189.00 9.00 2 7 5 7 788.00 019-27 Coin Slot 69.00 019-28 Compressor 3/4 H.P. 72 019-30 Light Fixture 439.00 PART 019-31 019-32 019-33 019-34 019-35 019-36 019-37 019-40 019E-23 019E-26 019E-32 019E-41 019E-47 019E-49 020-01 020-02 020-03 020-06 020-07 020-09 020-10 020-11 020-15 020-16 020-17 020-18 020-19 020-20A 020-20B 020-20C 020-21 020-22 020-23 020-24 020-25 K21-01 K21-03 K21-04 K21-06 022-04 022-05 022-06 022-07 022-09 022-10 022-11 023-01 023-02 023-03 023-05 023-06 12 V. Motor 1/3 H.P. 12V. Motor Exp. 1/2 H.P. 110V. Motor Exp. 1/2 H.P. Lock Box Coin Meter Water Valve Push Button Switch Air Motor Nylon Guide Grounding Clamp 100A Fused Receptacle SLB 1/2 Conduit Box 90 Degree Strain Relief SNAP Bushing Swivel MP 3/8" M&M Swivel MP 1/2" F&F Swivel MP 1/2" M&F Swivel H.P. 1/4" M&F Swivel H.P. 3/8" M&M Swivel H.P. 3/4" M&M Swivel H.P. 1" M&F Adapter 90 X M/F Short 1/2" Adapter 90 X M/F Long 3/4" Adapter 90 X M/F Short 1/4" Adapter 90 X M/F Short 3/8" SS16-Kit 1" Swivel Rep. Kit SS12-Kit 3/4" Swivel Rep. Kit SS4-Kit 1/4" Swivel Rep. Kit SS7-Kit 3/8" Swivel Rep. Kit SS8-Kit 1/2" Swivel Rep. Kit 59SK-16 1" Swivel Rep. Kit 59SK-12 3/4" Swivel Rep. Kit 59SK-8 1/2" Swivel Rep. Kit 59SK-6 3/8" Swivel Rep. Kit 59SK-4 1/4" Swivel Rep. Kit O-Ring Kit 1/4" O-Ring Kit 3/8" & 1/2" O-Ring Kit Welding O-Ring Kit 1-1/2" 100 Ret. Ring Large Tee 125 Ret. Ring Weld Tee 150 Ret. Ring Indust. 175 Ret. Ring Indust. 212 Ret. Ring Indust. 59 19/32" Ext. Ret. Ring 5/16" E Ring Snap G-9 Rubber Clamp G-11 Rubber Clamp G-14 Rubber Clamp 7092A Clamp Double G-5 Rubber Clamp 279.00 460.00 690.00 10 259.00 13 1 36 1 2 9.00 6 78.00 7 6 6 69.00 80.00 2 1 2 1
PART 023-07 024-10 024-12 024-16 025-02 025-03A 025-03B 025-03C 025-04A 025-04B 026-02 026-04 026-12 026-15 026-19 027-01 027-02 027-03 027-06 029-01 029-04 029-05 029-07 029-09 030-10 030-11 030-13 031-01 031-02 031-06 031-13 031-17 031-18 039-01 039-02 039-03 039-04 055-02 055-03 055-04 055-05 055-06 055-12 055-13 055-14 055-17 055-18 G-6 Rubber Clamp Nylon Handle 3240 Nylon Spacer Nylon Drag 1075 Taper Check Ball 1450 Ball Stop 1/4" 1450 Ball Stop 3/8" 1450 Ball Stop 1/2" 1450 Ball Stop 3/4" 1450 Ball Stop 1" Brass Ell M/F 1/4" M/M Brass Ell 1/4" X 1/4" Valve 1/4" Brass Valve Tube Fitting 1/4" BKF 20G Triangle Bearing BKF 24G Triangle Bearing BKF 28G Triangle Bearing FBE 20G Flange Bearing Gear 12 Tooth Gear 48 Tooth Gear 60 Tooth Gear 112 Tooth #35 Chain Length Check Valve Safety Valve Valve Stainlass Steel Lock Spring Welding Tee Spring Fort Lock with Keys Air Gage Copper Tube Assembly Copper Tube Assembly 1/4" M/F Forged Ell 1/2" F/F Forged Ell 1/4" x 3/8" M/F Forged Ell 1/4" to 1/2" Bulkhead Fitting Top Casting Bottom Casting Base Side Casting Base End Casting Top Casting Locking Device Cam Guide Arm Lock Guide Arm Locking Device Cam Guide Arm 10.00 3 1 2 3 6 1 2 1 8 8.00 1 150.00 8 98.00 388.00 8.00 3 2 055-23 055-26 055-27 055-28 055-32 055-33 055-34 055-45 055-48 F-55-07 F-55-08 F-55-16 F-55-20 F-55-25 056-01 056-02 056-03 056-04 056-05 056-06 056-07 056-08 057-01 057-04 057-05 057-06 057-07 057-08 057-09 057-10 057-12 058-07 058-08 058-09 058-10 058-11 058-15 059-01 059-03 059-05 059-06 059-08 059-10 059-12 064-02 064-04 Cover Flange Locking Ring Casting Locking Cam Axle Casting Axle Casting Axle Casting Flange Locking Ring Casting Adapter Block Guide Arm Roller Casting Bearing Casting Arbor Hub Bearing Arbor Casting Bearing Arbor Casting Compressor Cabinet Coin-Op Cabinet Reel Cabinet Top Cover Base 9" Pole Mount Gusset Front Door Access Door Access Door Small Door 17" Medium Door 23" Large Door 29" Wrap 17" Wrap 23" Wrap 29" Reel Mounting Plate Heater Bracket Fixed Wrap Stainless Corner Wrap Stainless Front Door Panel Side Door Stainless Access Door 11 Gallon Tank Timer Panel Timer Plate Wrap 36" Stainless Compressor Plate Door Set Coin-Op Panel Door Set Pit Box Lid Double (500) Pit Box Lid Single (600) 1 4 8 2 1 2 2 38.00 2 2 10 12 10 58.00 6 3 3 3 6 8 109.00 1 13 28.00 5 348.00 11 1 3 5 3 38.00 3
PART 064-10 064-11 064-12 064-14 Pit Box Lid Double (1000) Lock Hasp Hose Guide Plate Pit Box Lid Single (1100) 5 4 061-03 061-04 061-05 061-06 Light Pole Assembly Pole Cap Base Cover Hand Hole Cover 759.00 1 065-02 065-05 065-08 065-09 065-22 065-23 065-25 065-26 065-28 065-29 065-30 065-31 065-32 066-01 066-02 066-03 066-04 066-05 066-06 066-07 066-08 066-09 066-10 066-11 066-12 066-14 066-15 067-01 067-02 067-03 067-04 067-05 068-03 068-04 068-08 068-09 060-01 060-02 060-03 060-04 061-01 061-02 Cover Band 17" Cover Band 20" Center Support Band 17" Center Support Band 20" Arm Set (2100) Spring Plate 16" Guide Arm 8" Guide Arm 10" Brush Plate (2500) Brush Plate (2600) Receptacle Cover (Small) Receptacle Cover (Large) Brush Plate (2700) Reel Drum 8" x 7" Reel Drum 12" x 7" Reel Drum 16" x 7" Reel Drum 20" x 7" Reel Drum 8" x 9" Reel Drum 12" x 9" Reel Drum 16" x 9" Reel Drum 20" x 9" Reel Drum 12" x 4" Reel Drum 12" x 6" Reel Drum 12" x 12" Reel Drum 12" x 12" Reel Drum 20" x 12" Reel Drum 7" x 9" Axle Shaft 1-1/4" x 9" Axle Shaft 1-1/4" x 13" Axle Shaft 1-1/4" x 17" Axle Shaft 1-1/4" x 21" Crank Handle Spring Can Gusset Spring Can Off Set Gusset Motor Mounting Bracket Bearing Plate Compressor Box Compressor Coin-Op Box Wall Mount Plate Hose Hook Hose Hook Base Column 3 3 2 1 2 1 1 2 2 2 2 28.00 2 3 3 5 3 1 1 1 12 148.00 1 100.00 062-01 062-02 062-03 062-04 062-05 062-06 062-07 062-08 062-09 062-10 062-11 062-12 062-13 062-14 062-15 062-16 063-01 063-03 063-07 063-08 063-09 063-16 070-31 070-33 070-35 070-36 070-38 070-40 070-44 070-45 070-46 070-53 070-54 070-56 070-57 071-03 071-04 071-05 071-07 071-08 071-09 071-10 071-11 071-12 Cabinet (60 & 65) Door Panel Double Door Panel Single Checker Plate Double Checker Plate Single Door Panel Lock Up Double Door Panel Lock Up Single Checker Plate Lock Up Base Cover Reel Mount Cabinet Door Panel Lock Up Double Door Panel Lock Up Single Front Checker Plate Front Panel Push Button Front Panel Coin-Op 300 Double Tower Wrap 340 Base Cover Double 340 Compressor Cover 345 Roller U Brkt. (Short) 346 Roller U Brkt. (Long) ET Weight Assembly Reel Disk 14" Reel Disk 18" Reel Disk 24" Reel Disk 30" End Enclosure 17" End Enclosure 20" Drum Support 7" Drum Support 9" Drum Support 12" 2500 Cover Electric Reel 2600 Cover Electric Reel 2500 Reel Base 9" 2700 Cover Electric Reel Reel Base 15" Reel Base 23" Reel Base 9" Hanger Bracket Type B Hanger Bracket Reel Base (Small) Reel Base (Large) Reel Base 9" Reel Base 10" 15 2 2 3 29.00 2 16 3 38.00 2 4 429.00 4 7 8.00 5 5 5 5 7 3 10.00 1 2 3 4 4 3 28.00 5 5 4 4
071-13 071-14 071-15 071-16 071-17 071-18 071-19 071-21 071-22 071-23 071-24 071-25 071-26 071-27 071-28 071-29 071-30 071-31 071-32 071-33 071-34 071-35 071-36 071-37 071-38 071-39 071-40 071-41 071-42 071-43 071-44 071-45 071-46 071-47 071-48 071-57 071-58 071-59 071-60 071-61 071-66 071-67 Reel Base 11" Reel Base 6-1/2" Reel Base 18-1/2" Reel Base 22" Reel Base 10-1/2" Reel Base 12" Reel Base 16-1/4" Reel Base (SET) Reel Base 14" x 7" Reel Base 18" x 7" Reel Base 22" x 7" Reel Base 16" x 7" Reel Base 14" x 9" Reel Base 18" x 9" Reel Base 22" x 9" Reel Base 26" x 9" Reel Base 14" x 12" Reel Base 18" x 12" Reel Base 10" x 22" Reel Base 12" x 22" Reel Base 16" x 22" Reel Base 14" Wide Reel Base 18" Wide Reel Base 22" Wide Reel Base 26" Wide Reel Base 18" x 15" x 9" Reel Base 18" x 23" x 9" Reel Base 22" x 15" x 12" Reel Base 22" x 23" x 12" Reel Base 22" x 15" x 12" Reel Base 22" x 23" x 12" Reel Base 28" x 15" x 14" Reel Base 28" x 23" x 14" Reel Base Single 15" Reel Base Single 23" Reel Base 19" 2200 Electric Reel Base 7" 2200 Electric Reel Base 9" 2300 Tube Electric Base (S) 2300 Tube Electric Base (L) Cable Drum Guide 2400 Slip Ring Mount 4 4 4 49.00 4 4 4 98.00 40.00 4 4 4 48.00 50.00 5 5 58.00 6 8 8 88.00 7 7 78.00 79.00 11 1 1 1 1 13 13 14 49.00 40.00 5 3 4 2 1 091-02 Spacer Tube
WARRANTY WARRANTY: Hose reels and component parts manufactured by Duro Mfg. Inc. are guaranteed to be free from defects in material and workmanship for a period of one (1) year from date of invoice. WARRANTY: Rubber hose not of our manufacture is guaranteed as per original manufactures' warranty program. Rubber hose is guaranteed to be free from defects at the time it is put to use or reasonable notification of 30 days. WARRANTY: Other related products sold by Duro Mfg. Inc. not of our manufacturing will be guaranteed in line with OEM warranty. In any case, parts or units found to be defective by reason of faulty material or workmanship will be replaced at no charge, after inspection by our factory. Duro Mfg. Inc. liability shall be limited to the repair or replacement only. Maximum liability is in no case to exceed the value of Duro unit involved. No returns or charges will be accepted without prior agreement with the factory. This warranty becomes void if equipment has been tampered with or misused in other than intended design function. No responsibility will be assumed for improper choice of models, installation or varied uncontrollable field conditions. We reserve the right to make engineering changes in material and in dimensions for improving the performance of our equipment. TERMS: FREIGHT: RETURNS: CANCELLATION FEE: QUOTATIONS: SPEC. DESIGNS: BUSINESS HOURS: TERMS AND CONDITIONS Net 30 days on approved credit. Minimum billing $1 A service charge of 1 1/2% on past due accounts to cover cost of extra accounting. F.O.B. Factory Our responsibility ends at the acceptance of material by the common carrier. Consignee must file claim for shortages and damaged freight against common carrier if it occurs. Material returned for credit is subject to a prior notification and a 15% handling restocking fee. Materials returned for credit not resaleable are subject to a rebuilding fee. All returns must be freight prepaid unless prior arrangements are made. A charge will be made on any order cancellation after shipment has been made or any special order for materials not of our stock. All quotations are for immediate acceptance and are subject to any fluctuation in increased cost of materials after 30 days. Non standard products to customer's specifications can be canceled on written notice, but are subject to all expenses incurred at that time. Special designs to customer's specifications are not returnable. 7:30 AM - 4:00 PM PST DISTRIBUTED BY Printed in U.S.A. OCT. 08 DURO MANUFACTURING, INC. 3505 Arrowhead Drive Carson City, Nevada 89706 (775) 687-8866 FAX (775) 687-8877