DS-W-OMT---11-3-A OMNI T TM 1-1/,, 3,,, and OMNI T Meter Description 1-1/,, 3,,, and Sizes The OMNI T meter operation is based on advanced Floating Ball Technology (FBT). Totalization Mode AMR/AMI Mode Resettable Test Mode Features CONFORMANCE TO STANDARDS The OMNI T meter meets and far exceeds the most recent revision of AWWA Standard C71 class II standards. Each meter is performance tested to ensure compliance. All OMNI meters are NSF/ ANSI Standard 1, Annex F and G approved. PERFORMANCE The patented measurement principles of the OMNI T meter assure enhanced accuracy ranges, an overall greater accuracy, and a longer service life than any other comparable class meter produced. The OMNI T meter has no restrictions as to sustained flow rates within its continuous operating range. The floating ball measurement technology allows for flows up to its rated maximum capacity without affecting undue wear or accuracy degradation when installed in any orientation. CONSTRUCTION The OMNI T meter consists of two basic assemblies; the maincase and the measuring chamber. The measuring chamber assembly includes the floating ball impeller with a coated titanium shaft, hybrid axial bearings, integral flow straightener and an all electronic programmable register with protective bonnet. The maincase is made from industry proven Ductile Iron with an approved NSF epoxy coating. Maincase features are; easily removable measuring chamber, unique chamber seal to the maincase using a high pres- sure o-ring, testing port and a convenient integral strainer. upper and lower flow ranges capable on only the OMNI T meter. OMNI ELECTRONIC REGISTER STRAINER The OMNI T electronic register consist of a hermetically sealed register with an electronic pickup containing no mechanical gearing. The large character LCD displays AMR, Totalization and a Resettable Test Totalizer. OMNI register features; AMR resolution units that are fully programmable, Pulse output frequency that are fully programmable, Integral customer data logging capability, Integral resettable accuracy testing feature compatible with the UniPro Testing Assistant Program, Large, easy-to-read LCD also displays both forward and reverse flow directions and all with a 1-year battery life guarantee. The OMNI T with the V shaped integral strainer using a stainless steel screen along with Floating Ball Technology (FBT) create a design that gives far improved accuracy even in those once thought questionable settings. A removable strainer cover permits easy access to the screen for routine maintenance. MAGNETIC DRIVE Meter registration is achieved by utilizing a fully magnetic pickup system. This is accomplished by the magnetic actions of the embedded rotor magnets and the ultra sensitive register pickup probe. The only moving component in water is the floating ball impeller. MEASURING ELEMENT The revolutionary thermoplastic, hydro dynamically balanced impeller floats between the bearings. The Floating Ball Technology (FBT) allows the measuring element to operate virtually without friction or wear, thus creating the extended MAINTENANCE The OMNI T meter is designed for easy maintenance. Should any maintenance be required, the measuring chamber and / or strainer cover can be removed independently. Parts and or a replacement measuring chamber may be utilized in the event repairs are needed. Replacement Measuring Chambers Exchange are available for the OMNI T meters and may also be utilized for retrofitting to competitive meters to achieve increased accuracy and extended service life. AMR / AMI SYSTEMS: Meters and encoders are compatible with current Sensus AMR/AMI systems. GUARANTEE: Sensus OMNI T Meters are backed by The Sensus Guarantee. Ask your Sensus representative for details or see Bulletin G-5. www.mvandc.com sales@mvandc.com Phone: 77.5.337 Fax:.7.93
DS-W-OMT---11-3-A Page of 5 OMNI T: 1-1/,, 3,,, and Sizes OMNI T: 1 1/ - A D Register with Pulse and AMR C Measuring Chamber Assembly Strainer Cover J Test Plug B Direction of Flow E F - Bolt Circle G - No. of Bolts H - Size of Bolts { T Rotor Maincase Strainer Screen OMNI T: - DIMENSIONS AND NET WEIGHTS Meter and Pipe Size Normal Operating Range 1-1/ DN mm 1.5 gpm gpm. m3/hr 5 m3/hr DN 5mm 1.5 gpm 5 gpm.3 m3/hr 57 m3/hr without Strainer DN 5mm 1.5 gpm 5 gpm.3 m3/hr 57 m3/hr 3 DN mm.5 gpm 5 gpm.57 m3/hr 1 m3/hr DN mm 3. gpm 15 gpm. m3/hr m3/hr DN 15mm gpm 5 gpm.91 m3/hr 5 m3/hr DN mm 5 gpm 1.1 m3/hr 35 gpm 7 m3/hr DN 5mm gpm 55 gpm 1. m3/hr 19 m3/hr Connections A B C D E F G H J Net Weight Shipping Weight 13 33mm 7-7/ mm 15/ mm 5-1/ 13mm -5/ 1mm 5/ 1mm 5mm 1. lbs..53 kg...5 lbs. 1. kg. 17 3mm 7-7/ mm 5mm 5-1mm -5/ -1/ 11mm 1-1/ mm 7. lbs. 1. kg. 3.5 lbs. 15.5 kg. 5mm 7-7/ mm 5mm 5-1mm -5/ -1/ 11mm N/A 17. lbs. 7.9 kg..5 lbs. 11.11 kg. 19 3mm - mm 7-7/ mm -1/ 15mm 153mm 5/ 1mm 5mm.5 lbs.. kg. 57. lbs.. kg. 3 5mm 11-3/ mm 15/ mm 9-1/ 3mm - 11mm 7-1/ 191mm 5/ 1mm 5mm 7.9 lbs. 3. kg. 75. lbs. 3.3 kg. 7 5mm 13-1/ 33mm 15/ mm 1 79mm 5-1mm 9-1/ mm 5mm 1 lbs. 5.3 kg. 15 lbs. 1. kg. 3-1/ 75 mm 15 31 mm 11/ 17 mm 13-1/ 33 mm - 17 mm 11-3 mm 19 mm NPT 71 lbs. 1 kg. 51 lbs. 3 kg. 1-1/ 19 5mm 11/ 17mm mm -1/ 1mm 1-1/ 3mm 1 7/ mm NPT 5 lbs. 311 kg. 75 lbs. 33 kg. www.mvandc.com sales@mvandc.com Phone: 77.5.337 Fax:.7.93
DS-W-OMT---11-3-A Page 3 of 5 OMNI T : 1-1/,, 3,,, and Sizes SPECIFICATIONS SERVICE OPERATING RANGE (% ± 1.5%) LOW FLOW (% %) CONTINUOUS OPERATION INTERMITTENT OPERATION PRESSURE LOSS OPERATING PRESSURE FLANGE CONNECTIONS REGISTER NSF APPROVED MATERIALS Measurement of potable and reclaim water. Operating temperature range of 33 o F (5 o C) - 15 o F (5. o C) 1-1/ : 1.5 GPM (. - 5 m 3 /hr) and without Strainer: 1.5 5 GPM (.3 57 m 3 /hr) 3 :.5 5 GPM (.57 1 m 3 /hr) : 3 15 GPM (. m 3 /hr) : 5 GPM (.91 5 m 3 /hr) : 5 35 GPM (1.1-7 m 3/ hr) : 55 GPM (1. - 19 m 3 /hr) 1-1/ :.75 GPM (.17 m 3 /hr) and without Strainer: 1. GPM (.3 m 3 /hr) 3 : 1.5 GPM (.3 m 3 /hr) :. GPM (.5 m 3 /hr) :.5 GPM (.57 m 3 /hr) : GPM (.9 m 3 /hr) : 5 GPM (1.1 m 3 /hr) 1-1/ : 1 GPM (3 m 3 /hr) and without Strainer: GPM (5 m 3 /hr) 3 : 5 GPM (11 m 3 /hr) : GPM (7 m 3 /hr) : GPM (5 m 3 /hr) : 35 GPM (7 m 3 /hr) : 55 GPM (19 m 3 /hr) 1-1/ : GPM (5 m 3 /hr) and without Strainer: 5 GPM (57 m 3 /hr) 3 : 5 GPM (1 m 3 /hr) : 15 GPM ( m 3 /hr) : 5 GPM (5 m 3 /hr) : 7 GPM (17 m 3 /hr) : 7 GPM (159 m 3 /hr) 1-1/ :.9 psi @ 1 GPM ( bar @ 3 m 3 /hr) and without Strainer: 7. psi @ GPM (. bar @ 5 m 3 /hr) 3 : 5.1 psi @ 5 GPM (.35 bar @ 11 m 3 /hr) :.7 psi @ GPM (. bar @ 7 m 3 /hr) :. psi @ GPM (.5 bar @ 5 m 3 /hr) : 5.1 psi @ 35 GPM (.35 bar @ 7 m 3 /hr) : 7. psi @ 55 GPM (.5 bar @ 19 m 3 /hr) PSI (13. bar) U.S. ANSI B1.1 / AWWA Class 15 Fully electronic sealed register with programmable registration (Gal. /Cu.Ft./ Cu. Mtr. / Imp.Gal / Acre Ft.) Programmable AMR/AMI reading and pulse outputs Guaranteed 1 year battery life Maincase: Measuring Chamber: Rotor Floating Ball : Radial Bearings: Thrust Bearings: Magnets: Strainer Screen: Strainer Cover: Test Plug: Thermoplastic Thermoplastic Hybrid Thermoplastic Sapphire/Ceramic Jewel Ceramic Magnet Stainless Steel sales@mvandc.com Phone: 77.5.337 Fax:.7.93
DS-W-OMT---11-3-A Page of 5 OMNI T : 1-1/,, 3,,, and Sizes Headloss Curves 1 1 1 1.5" T Pressure Loss Curve with Strainer.75 1.5 7 15 3 5 1 1.5" T Accuracy Curve 1 9.75 1.5 7 15 3 5 1 9.5 1 1 1 " T Pressure Loss Curve with Strainer 1. 1.5 7 15 3 5 5 1 " T Accuracy Curve 9 1. 1.5 7 15 3 5 5 9.5 1 3" T Accuracy Curve 9 1.5.5 1 5 3 5 5 9.5 1 1 1 " T Pressure Loss Curve with Strainer 1 5 3 15 1 " T Accuracy Curve 9. 3. 1 5 3 15 9.5 sales@mvandc.com Phone: 77.5.337 Fax:.7.93
DS-W-OMT---11-3-A Page 5 of 5 OMNI T : 1-1/,, 3,,, and Sizes Headloss Curves 1 1 1 " T Pressure Loss Curve with Strainer 5 5 5 15 5 1 " T Accuracy Curve 9.5. 5 5 5 15 5 9.5 All products purchased and services performed are subject to Sensus terms of sale, available at either; http://na.sensus.com/tc/termsconditions.pdf or 1--METER-IT. Sensus reserves the right to modify these terms and conditions in its own discretion without notice to the customer. This document is for informational purposes only, and SENSUS MAKES NO EXPRESS WARRANTIES IN THIS DOCUMENT. FURTHERMORE, THERE ARE NO IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, WARRANTIES AS TO FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY. ANY USE OF THE PRODUCTS THAT IS NOT SPECIFICALLY PERMITTED HEREIN IS PROHIBITED. 1 Six Forks Road, Suite 7 Raleigh, NC 715 1--3-37 www.sensus.com/water sales@mvandc.com Phone: 77.5.337 Fax:.7.93