mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com
ontent uni QN page 3-6 uni QN Rough page 7-0 uni QN all page -
Datasheet: uni QN EN Plastic Modular elt Series uni QN Running direction elt material & color POM-SLF PP PP Pin material & color W PP PP W P P (Nominal) L T Straight running belt Nominal pitch: 5.4 mm (.00 in) Surface type: Flat Surface opening: losed ackflex radius: 40.0 mm (.57 in) Pin : 5.0 mm (0.9 in) mm in mm in 5.4.00 L 4.4 0.7 T 8.8 0.35 - - - Non standard material and color: See uni Material and olor Overview. lternative pin and lock materials: Solid Lockpin: P6.6 D Pin: PP W P6.6 PE W PT LG and SS304 Endlock: P6.6 D Lockpin: PT LG P6.6 D N PP W elt width Permissible tensile force (elt/pin material) elt weight (elt/pin material) POM-SLF/PP PP/PP POM-SLF/PP PP/PP mm in N lbf N lbf kg/m lb/ft kg/m lb/ft *Min. No. drive sprocket per shaft Number of wear strips (Min. No.) **arry (pcs) 39.5 365 307 780 75 0.3 0. 0. 0.4 5.0 768 397 00 7 0.4 0.9 0.3 0.8 77 3.0 695 606 540 346 0.6 0.43 0.4 0.8 53 6.0 5355 04 3060 688.3 0.86 0.8 0.56 9 9.0 805 80 4580 030.9.9. 0.83 305.0 0675 400 600 37.6.7.6. 3 3 38 5.0 3370 3006 7640 77 3..6..39 3 3 458 8.0 6030 3604 960 059 3.8.59.5.66 4 4 534.0 8690 40 0680 40 4.5 3.0.9.94 4 4 60 4.0 350 4799 00 743 5. 3.44 3.3. 5 5 3 **Return (pcs) PITH 5.4 MM/.00 IN STRIGHT RUNNING STNDRD 687 7.0 4045 5405 3740 3089 5.8 3.88 3.7.49 5 5 3 763 30.0 6705 6003 560 3430 6.4 4.3 4..77 6 6 3 dditional standard belt widths are available in steps of 76.3 mm (3.00 in). dditional non-standard belt widths are available in steps of 5.4 mm (.00 in). 983 78. 69405 560 39660 896 6.7.9 0.7 7.0 4 4 7 dditional standard belt widths are available in steps of 76.3 mm (3.00 in). dditional non-standard belt widths are available in steps of 5.4 mm (.00 in). 974 7. 04090 3399 59480 337 5.0 6.79 6. 0.79 0 0 0 General belt tolerance is +0/-0.4% at 3 /73 F and 50% RH. For exact belt width contact ustomer Service. Non standard belt width on request. *Max. Load per Drive Sprocket. elt material: POM-SLF 300 N (57 lbf), PP 300 N (9 lbf). **Max. Spacing between wear strips, arry: 5 mm (6 in); Return: 304 mm ( in). = Single Link 3
Datasheet: uni QN ccessories Rubber Top urved Rib urved Rib Flat Rib Flat Rib elt Rubber Link Width mm in mm in mm in size mm in urved Rib Flat Rib PP 03 K 4.9 0.59 7.3 0.9 4.5 0.8 4.85 0.58 7.5 0.9.5 0.0 K300 75.8.98 K600 5.0 5.98 K300 75.8.98 K600 5.0 5.98 Non Standard material and color: See uni Material and olor Overview. ccessories Flight H Non Stick Flight PP-I W POM-SLF H Width Indent Link size mm in mm in mm in 5.4.00 K600 5.0 5.98 0.0 0.00 Non Standard material and color: See uni Material and olor Overview. 4
Datasheet: uni QN ccessories NON STNDRD Tab Single Link Only K50 D K00 E F Recommended link material & color Recommended pin material & color D E F mm in mm in mm in mm in mm in mm in Link Size ottom Guide POM-SLF PP P6.6 D 8.8 0.35 4.4 0.7 4.8 0.9 30.3.9 9.9.8 4..66 K50 K00 Solid Lockpin as default lock system. lternative pin materials & color: PT LG Non Standard material and color: See uni Material and olor Overview. ccessories mflight Running direction H H H H H H mm in mm in mm in Push PE W 7.0 0.67 7.0 0.67 4.0 0.55 Other Non Standard option: See uni mflight Overview. W (elt width) mm in min 3.4.8 Running direction min 38.5.5 8.0 0.7 PI max W - 06.9 W - 4. PI PI min 3.7.9 Increment:.7 mm (0.50 in) 5
Datasheet: uni QN Sprocket No. of teeth Pilot bore in mm.00 5.4.8 30.0 ore size.5.50 3.8 38..57 40.0.36 60.0.50 63.5 Overall Pitch Hub Dimension Dimension mm in mm in mm in mm in mm in Single row/two way Double row/two way Molded P6 LG Machined P6 N Z0 x 80.3 3.6 8. 3.4 65.0.56 34.7.36 45.5.79 x x Z x 96.8 3.8 98. 3.86 70.0.76 43.0.69 53.5. x x Z5 x.5 4.78. 4.8 70.0 00.0 04.0.76 3.94 4.09 55.4.8 65.5.58 x x Z8 x 46.0 5.75 46.3 5.76 70.0 04.0 0.0.76 4.09 4.7 67.6.66 77..5 3.05 x x Z9 x 54. 6.07 54.3 6.07 70.0 0.0.76 4.7 7.7.8 8.6 3. x x Moulded sprocket Moulded sprocket Moulded sprocket Non standard material and color: See uni Material and olor Overview. Same sprocket type as for the uni QN serie. Other sprocket sizes are available upon request. Two-part sprockets are available upon request. Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet. Width of tooth = 0.0 mm (0.39 in) Width of sprocket = 5.0 mm (0.98 in) Max load per sprocket shown does not take bore size into account. Please also ensure that sufficient size shaft is chosen for corresponding load. For correct sprocket position: See uni ssembly Instructions for uni QN. For more detailed sprocket information. contact ustomer Service. uni QN /60 onveyor elts Seamless elts Modular elts Timing elts Expert advice, quality solutions and local service for all your belting needs www.ammeraalbeltech.com This information is subject to alteration due to continuous development. mmeraal eltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. ll activities performed and services rendered by mmeraal eltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. Transmission elts Fabrication & service mmeraal eltech Modular /S Hjulmagervej DK-700 Vejle T +45 757 300 F +45 757 3348 admin@unichains.com www.unichains.com 6
Datasheet: uni QN Rough EN Plastic Modular elt Series uni QN Rough elt material & color Running direction POM-SLF Pin material & color PP elt width Permissible tensile force (elt/pin material) POM-SLF/PP F P P (Nominal) L T Straight running belt Nominal pitch: 5.4 mm (.00 in) Surface type: Rough Top Surface opening: losed ackflex radius: 40.0 mm (.57 in) Pin : 5.0 mm (0.3 in) mm in mm in 5.4.00 L 4.4 0.7 F 0.8 0.03 T 8.8 0.35 Non standard material and color: See uni Material and olor Overview. lternative pin and lock materials: Solid Lockpin: P6.6 D Pin: PP W P6.6 PE W PT LG and SS304 Endlock: P6.6 D Lockpin: PT LG P6.6 D N PP W elt weight (elt/pin material) POM-SLF/PP mm in N lbf kg/m lb/ft *Min. No. drive sprocket per shaft Number of wear strips (Min. No.) **arry (pcs) 77 3.0 695 606 0.6 0.43 53 6.0 5355 04.3 0.86 9 9.0 805 80.9.9 305.0 0675 400.6.7 3 3 38 5.0 3370 3006 3..6 3 3 458 8.0 6030 3604 3.8.59 4 4 534.0 8690 40 4.5 3.0 4 4 60 4.0 350 4799 5. 3.44 5 5 3 687 7.0 4045 5405 5.8 3.88 5 5 3 763 30.0 6705 6003 6.4 4.3 6 6 3 **Return (pcs) PITH 5.4 MM/.00 IN STRIGHT RUNNING STNDRD 839 33.0 9365 660 7.0 4.74 6 6 3 95 36.0 305 799 7.7 5.7 7 7 4 99 39. 3470 7805 8.3 5.60 7 7 4 dditional standard belt widths are available in steps of 76.3 mm (3.00 in). dditional non-standard belt widths are available in steps of 5.4 mm (.00 in). 983 78. 69405 560 6.7.9 4 4 7 dditional standard belt widths are available in steps of 76.3 mm (3.00 in). dditional non-standard belt widths are available in steps of 5.4 mm (.00 in). 974 7. 04090 3399 5.0 6.79 0 0 0 General belt tolerance is +0/-0.4% at 3 /73 F and 50% RH. For exact belt width contact ustomer Service. Non standard belt width on request. *Max. Load per Drive Sprocket. elt material: POM-SLF 300 N (57 lbf), PP 300 N (9 lbf). **Max. Spacing between wear strips, arry: 5 mm (6 in); Return: 304 mm ( in). = Single Link 7
Datasheet: uni QN Rough ccessories Rubber Top urved Rib urved Rib Flat Rib Flat Rib elt Rubber Link Width mm in mm in mm in size mm in urved Rib Flat Rib PP 03 K 4.9 0.59 7.3 0.9 4.5 0.8 4.85 0.58 7.5 0.9.5 0.0 K300 75.8.98 K600 5.0 5.98 K300 75.8.98 K600 5.0 5.98 Non Standard material and color: See uni Material and olor Overview. ccessories Flight H Non Stick Flight PP-I W POM-SLF H Width Indent Link size mm in mm in mm in 5.4.00 K600 5.0 5.98 0.0 0.00 Non Standard material and color: See uni Material and olor Overview. ccessories Non Standard uni mflight Running direction Principle sketch Other Non Standard option: See uni mflight Overview. 8
Datasheet: uni QN Rough Sprocket No. of teeth Pilot bore in mm.00 5.4.8 30.0 ore size.5.50 3.8 38..57 40.0.36 60.0.50 63.5 Overall Pitch Hub Dimension Dimension mm in mm in mm in mm in mm in Single row/two way Double row/two way Molded P6 LG Machined P6 N Z0 x 80.3 3.6 8. 3.4 65.0.56 34.7.36 45.5.79 x x Z x 96.8 3.8 98. 3.86 70.0.76 43.0.69 53.5. x x Z5 x.5 4.78. 4.8 70.0 00.0 04.0.76 3.94 4.09 55.4.8 65.5.58 x x Z8 x 46.0 5.75 46.3 5.76 70.0 04.0 0.0.76 4.09 4.7 67.6.66 77..5 3.05 x x Z9 x 54. 6.07 54.3 6.07 70.0 0.0.76 4.7 7.7.8 8.6 3. x x Moulded sprocket Moulded sprocket Moulded sprocket Non standard material and color: See uni Material and olor Overview. Same sprocket type as for the uni QN serie. Other sprocket sizes are available upon request. Two-part sprockets are available upon request. Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet. Width of tooth = 0.0 mm (0.39 in) Width of sprocket = 5.0 mm (0.98 in) Max load per sprocket shown does not take bore size into account. Please also ensure that sufficient size shaft is chosen for corresponding load. For correct sprocket position: See uni ssembly Instructions for uni QN. For more detailed sprocket information. contact ustomer Service. 9
Datasheet: uni QN Rough uni QN Rough/606 onveyor elts Seamless elts Modular elts Timing elts Expert advice, quality solutions and local service for all your belting needs www.ammeraalbeltech.com This information is subject to alteration due to continuous development. mmeraal eltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. ll activities performed and services rendered by mmeraal eltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. Transmission elts Fabrication & service mmeraal eltech Modular /S Hjulmagervej DK-700 Vejle T +45 757 300 F +45 757 3348 admin@unichains.com www.unichains.com 0
Datasheet: uni QN all EN Plastic Modular elt Series uni QN all Running direction R R P T L Straight running belt Nominal pitch: 5.4 mm (.00 in) Surface type: all Surface opening: losed ackflex radius: 5.0 mm (0.98 in) Pin : 5.0 mm (0.0 in) STNDRD elt material & color POM-SLF mm in mm in all material & color P6.6 N P (Nominal) 5.4.00 R.95 0.08 Pin material & color PP Non standard material and color: See uni Material and olor Overview. Permissible tensile force (elt/pin material) L 4.4 0.7 T 8.8 0.35 elt weight (elt/pin material) elt width * Min No drive sprocket POM-SLF/PP POM-SLF/PP ** per shaft arry (pcs) mm in N lbf Kg/m Ib/ft Number of wear strips (min no) 53 6.0 3443 774.4 0.96 9 9.0 553 58..43 305.0 6863 543.8.9 3 3 38 5.0 8573 97 3.5.38 3 3 457 8.0 083 3 4.3.86 4 4 533.0 993 696 5.0 3.33 4 4 609 4.0 3703 3080 5.7 3.8 5 5 3 685 7.0 543 3465 6.4 4.8 5 5 3 76 30.0 73 3849 7. 4.76 6 6 3 838 33.0 8855 439 7.8 5.4 6 6 3 94 36.0 0565 463 8.5 5.7 7 7 4 990 39.0 75 5007 9. 6.9 7 7 4 ** Return (pcs) PITH 5.4 MM/.00 IN STRIGHT RUNNING 066 4.0 3985 539 9.9 6.66 8 8 4 dditional standard belt widths are available in steps of 76.3 mm (3.00 in). 979 77.9 4458 000 8.4.37 4 4 7 dditional standard belt widths are available in steps of 76.3 mm (3.00 in). 968 6.9 66780 50 7.6 8.55 0 0 0 General belt tolerance is +0/-0.4% at 3 /73 F and 50% RH. For exact belt width contact ustomer Service. *Max. Load per Drive Sprocket. elt material: POM-SLF 840 N (44 lbf) **Max. Spacing between wear strips, arry: 5 mm (6 in); Return: 304 mm ( in). = Single Link
Datasheet: uni QN all Sprocket No. of teeth Pilot bore in mm.50 38. ore size.57 40.0.36 60.0.50 uni QN all/709 63.5 Overall Pitch Hub Dimension Dimension mm in mm in mm in mm in mm in Single row/two way Double row/two way Molded P6 LG Machined P6 N Z5 x.5 4.78.5 4.8 00.0 3.93 55.4.8 66..60 x x Z8 x 46. 5.75 46.3 5.76 0.0 4.7 67.6.66 78.4 3.08 x x Z9 x 54. 6.07 54.3 6.07 5.0 4.9 7.7.8 8.5 3.4 x x Machined sprocket Non standard material and color: See uni Material and olor Overview. Other sprocket sizes are available upon request. Two-part sprockets are available upon request. Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet. Width of tooth = 8.0 mm (0.3 in) Width of sprocket = 5.0 mm (0.98 in) Max load per sprocket shown does not take bore size into account. Please also ensure that sufficient size shaft is chosen for corresponding load. For correct sprocket position: See uni ssembly Instructions for uni QN all. For more detailed sprocket information. contact ustomer Service. onveyor elts Seamless elts Modular elts Timing elts Expert advice, quality solutions and local service for all your belting needs www.ammeraalbeltech.com This information is subject to alteration due to continuous development. mmeraal eltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. ll activities performed and services rendered by mmeraal eltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. Transmission elts Fabrication & service mmeraal eltech Modular /S Hjulmagervej DK-700 Vejle T +45 757 300 F +45 757 3348 admin@unichains.com www.unichains.com
Date: 07.06 onveyor elts Seamless elts Modular elts Timing elts Expert advice, quality solutions and local service for all your belting needs www.ammeraalbeltech.com This information is subject to alteration due to continuous development. mmeraal eltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. ll activities performed and services rendered by mmeraal eltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. Transmission elts Fabrication & service Global Headquarters: mmeraal eltech Holding.V. P.O. ox 38, 700 Heerhugowaard The Netherlands T +3 7 575 F +3 7 57 6455 info@ammeraalbeltech.com