Leading the field! TAURUS agricultural technical documentation edition

Leadg the field! TAURUS agricultural technical documentation 2017 edition

Contents Key dates for TAURUS... 2 TAURUS Agriculture range... 3 TAURUS tyres by range... 4 Radial ply tyres with a cord... 5 Agricultural tyre size markgs... 6 LI-SI markgs on Taurus radial ply tyres... 7 Load dices and speed symbols... 7 Equivalent sizes (steps 1 andt 2)...8-11 TAURUS tyres by dimension (step 3)... 12 Pot HP... 14 Pot 65...15-16 Pot 70...17-18 Pot 7S... 19 Pot 8...20-22 RC 95 Soilsaver...23 - Inner tube references... 26 Valves characteristics... 28 Rim and O-rg references... 29 Use and implementation... Instructions for use... 31 Calculation of mechanical lead... 32 Front wheel lead % measurement... 33 Key pots for fittg and removg tyres...34-39 TAURUS Agricultural range Farmers trust TAURUS, a brand whose core values are rooted power, tradition and modernity. TAURUS celebrated his 100 years 2013. This reference guide is aimed at tyre retailers, dealers and endusers. It presents the entire TAURUS product range and providesformation on tyre characteristics, specific advantages, detailedtechnical formation as well as recommendations for usg eachtyre. Technical tyre data is compliant with E.T.R.T.O.recommendations This easy-to-use reference guide provides a comprehensive overview of the product range. However, we cannot guaranteethe accuracy of the formation it contas. Please contact your tyre dealer if you have any questions or requireany additional formation or professional advice about tyres. All recommendations provided are subject to change once thisformation has been published (January 2017). We reserve theright to change any technical formation without prior warng. HISTORIQUE Key dates for DE TAURUS 1882: The Hungarian company Ruggyanta Arugyár is founded Budapest. 1913: The TAURUS brand is launched. 1923: The brand s logo a bull is created. 1949: Ruggyanta Arugyár is nationalised. 1973: The company s name is changed to Taurus Hungarian Rubber Works. The TAURUS brand represents all of the company s products. 1974: Radial ply tyres with a metal casg ply are manufactured for HGVs Budapest. 1979: Agricultural tyres are manufactured Nyíregyháza. 1992: The TAURUS Agrotyre branch of the group is created. 1996: The Michel Group acquires the HGV and agricultural busessesof Taurus Rubber Company Ltd and Carbonpack. 1923 1975 1999 POINT 8 POINT 70 POINT 7 special 60 to 180 HP POINT 65 POINT HP RC 95 80 to 200 HP 200 HP and over Row Crop TAURUS agricultural technical documentation 2017 3

TAURUS tyres by range Radial ply tyres with a cord Sizes Sizes Sizes Sizes Page POINT HP 600/65 R28 N 14 600/70 R N 14 6/85 R38 N 14 710/70 R38 N 14 Page POINT 65 4/65 R24 N 15 480/65 R24 N 15 480/65 R28 15 5/65 R28 15 5/65 R 15 5/65 R34 16 600/65 R34 16 600/65 R38 N 16 6/65 R38 N 16 6/65 R42 16 Page POINT 70 320/70 R24 17 360/70 R24 17 380/70 R24 17 420/70 R24 17 480/70 R24 17 360/70 R28 18 380/70 R28 18 420/70 R28 18 480/70 R28 18 480/70 R 18 480/70 R34 18 520/70 R34 18 480/70 R38 18 520/70 R38 18 580/70 R38 18 620/70 R42 N 18 Page POINT 7 SPECIAL 0/75 R38 19 Sizes Page POINT 8 11.2 R20 20 11.2 R24 20 12.4 R24 20 13.6 R24 20 14.9 R24 20 16.9 R24 20 11.2 R28 21 12.4 R28 21 13.6 R28 21 14.9 R28 21 16.9 R28 21 14.9 R 21 16.9 R 21 18.4 R 21 12.4 R32 21 16.9 R34 22 18.4 R34 22 12.4 R36 22 13.6 R36 22 13.6 R38 22 16.9 R38 22 18.4 R38 22 20.8 R38 22 20.8 R42 22 Sizes Page RC 95 2/95 R32 23 270/95 R32 23 2/95 R36 24 270/95 R36 24 270/95 R38 24 270/95 R42 24 2/95 R44 24 270/95 R44 24 0/95 R46 24 2/95 R48 270/95 R48 3/85 R48 380/90 R N = NEW Radial ply tyres lay all of the cord plies at 90 degrees to the direction oftravel. The plies are reforced by a belt of several bracg layers. Radial ply tyre benefits The number of plies can be reduced considerably without affectgthe strength of the casg. A thner casg means lower heat build-up when use, which turn means the tyre lasts longer. More flexible sidewalls provide a smoother ride and improve drivercomfort. Low rollg resistance cuts fuel consumption. More resistant tread lugs mean that the radial ply tyre tread is morereliable and lasts longer. The bracg plies distribute pressure more evenly on the ground. The radial ply design boasts a wider contact patch, which reducessoil compaction. The radial ply tread lug provides more grip, which turn improvesthe productivity of the tyre (greater hectare/hour ratio). 4 TAURUS agricultural technical documentation 2017 TAURUS agricultural technical documentation 2017 5

Agricultural tyre size markgs LI-SI markgs on TAURUS 160 KPA (1,6 BAR) 2 KPA (2,4 BARS) 320 KPA (3,2 BARS) 360 KPA (3,6 BARS) 16.9 Tyre section width ( ches) when mounted on are commended rim R Radial construction Nomal of rim ( ches) Speed symbols () A2... 10 A5... A6... A8... B... 16.9 R 480 Tyre section width ( mm) when mounted on a recommended rim 70 Aspect ratio (%) R Radial construction 34 Nomal rim ( ches) 134 A2 SI A2 = 10 LI 134 = 2120 kg Nomal tyre pressure 123 A8 SI A8 = LI 123 = 15 kg Unit conversion table: 1 centimetre cm = 0.3937 1 ch = 2.54 cm 1 metre m = 3.281 ft. 1 foot ft. = 0.48 m 1 kilometre km = 0.6214 mi 1 mile m = 1.6093 km 1 litre = 0.21 gal 1 gallon gal = 4.55 litres 1 kilogramme kg = 2.205 lb. = 1 dan 1 pound lb. = 0.454 kg 1 bar bar = 100 kpa 580/70 R38 Tyre dimensions S Tyre section width R Radius with static load R Free radius D Overall = 2 x free radius ø Internal S ø R R D Load dex Indices Index Charges Load Indices Index Charges Load Indices Index Charges Load Indices Index Charges Load Indices Index Charges Load Indices Index Charges Load en kg kg en kg kg en kg kg en kg kg en kg kg en kg kg 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 8 8 875 900 9 9 975 1000 10 1060 1090 1120 11 1180 1215 12 117 118 119 120 121 122 123 124 1 126 127 128 129 1 131 132 1285 1320 1360 10 14 10 15 1600 16 1700 17 1800 18 1900 19 2000 133 134 135 136 137 138 139 1 141 142 143 144 145 146 147 148 2060 2120 2180 22 20 2360 24 20 75 26 27 2800 2900 00 75 31 149 1 151 152 153 154 155 156 157 158 159 160 161 162 163 164 32 33 34 35 36 37 3875 00 41 42 4375 46 47 4875 00 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 51 54 5600 5800 6000 61 60 60 6700 6900 7100 70 70 77 8000 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 82 80 87 9000 92 90 97 10000 100 10600 10900 11200 110 11800 121 120 6 TAURUS agricultural technical documentation 2017 Documentation technique agricole TAURUS 2017 7

Dimensional equivalences (step 1) Step 1: Determe the correspondg SRI usg the origal dimension. This equivalence table is established by ETRTO and is not exhaustive. For other dimensions please consult Michel for advice. SRI: Speed Radius Index is a parameter used to calculate the theoretical speed of vehicles durg EU certification procedures and for the terchangeability of tyre dimensions. RIM DIMENSIONS SRI 6.R16 360 7.R16 390 2/80R16 390 16 260/70R16 360 280/65R16 360 280/70R16 390 320/65R16 390 7.R18 410 18 280/70R18 410 320/65R18 410 3/65R18 4 7.R20 4 9.5R20 4 11.2R20 475 12.4R20 0 13.6R20 5 14.9LR20 5 260/80R20 4 280/70R20 4 280/85R20 475 20 0/70R20 4 320/70R20 475 320/85R20 0 3/65R20 4 3/75R20 0 360/70R20 0 380/70R20 5 380/75R20 5 420/65R20 0 4/65R20 5 8.3R24 475 2/85R24 (9.5R24) 0 280/85R24 (11.2R24) 5 0/70R24 0 320/70R24 5 320/85R24 (12.4R24) 5 3/85R24 (13.6R24) 575 360/70R24 5 380/70R24 575 380/85R24 (14.9R24) 600 24 0/70R24 575 420/65R24 5 420/70R24 600 420/85R24 (16.9R24) 6 4/65R24 575 460/70R24 600 480/65R24 600 480/70R24 6 0/70R24 6 5/65R24 6 RIM DIMENSIONS SRI 1000/R 7 480/70R26 6 23.1-26 7 520/80R26 700 5/65R26 6 26 580/70R26 675 620/70R26 7 620/75R26 7 7/R26 675 7/65R26 7 9.5R28 5 2/85R28 5 280/85R28 (11.2R28) 575 320/70R28 575 320/85R28 (12.4R28) 600 3/65R28 5 3/85R28 (13.6R28) 6 360/70R28 600 380/70R28 6 380/85R28 (14.9R28) 6 28 420/65R28 600 420/70R28 6 420/75R28 6 420/85R28 (16.9R28) 675 4/65R28 6 480/60R28 6 480/65R28 6 480/70R28 675 520/60R28 6 5/65R28 675 600/60R28 675 600/65R28 700 600/70R28 7 380/85R (14.9R) 675 420/70R 675 420/85R (16.9R) 700 420/90R 7 460/85R (18.4R) 7 480/70R 700 480/75R 700 520/70R 7 520/85R 775 5/65R 700 600/60R 700 600/65R 7 600/70R 7 620/70R 775 620/75R 800 6/70R 800 6/75R 800 710/55R 7 710/60R 7 RIM DIMENSIONS SRI 210/95R32 (8.3R32) 575 2/95R32 (9.5R32) 600 270/95R32 (11.2R32) 6 320/85R32 (12.4R32) 6 6/75R32 (24.5R32) 8 32 680/75R32 (.5LR32) 875 680/85R32 9 800/65R32 875 800/70R32 9 900/60R32 9 1000/55R32 875 10/R32 875 320/85R34 675 380/85R34 7 420/85R34 (16.9R34) 7 460/85R34 (18.4R34) 775 480/70R34 7 520/70R34 775 520/75R34 775 34 5/65R34 7 600/60R34 7 600/65R34 775 620/75R34 8 6/60R34 775 6/65R34 8 6/75R34 875 710/60R34 8 710/75R34 9 210/95R36 (8.3R36) 6 2/95R36 (9.5R36) 6 36 270/95R36 (11.2R36) 675 320/85R36 (12.4R36) 700 3/85R36 (13.6R36) 7 270/95R38 (11.2R38) 700 320/85R38 (12.4R38) 7 3/85R38 (13.6R38) 7 380/80R38 7 380/95R38 800 0/75R38 (15.5R38) 7 38 420/85R38 (16.9R38) 800 460/85R38 (18.4R38) 8 480/70R38 800 520/70R38 8 520/85R38 (20.8R38) 875 5/65R38 800 600/60R38 800 600/65R38 8 6/60R38 8 RIM DIMENSIONS SRI 580/70R38 875 620/70R38 875 6/65R38 875 6/75R38 9 6/85R38 975 38 680/75R38 9 710/60R38 875 710/70R38 9 710/85R38 10 7/65R38 9 800/70R38 975 900/60R38 975 2/95R (9.5R) 700 270/95R42 (11.2R42) 7 0/95R42 (12.4R42) 800 320/90R42 800 480/80R42 (18.4R42) 875 520/85R42 (20.8R42) 9 580/85R42 975 42 620/70R42 9 6/65R42 9 6/85R42 10 710/60R42 9 710/70R42 975 710/75R42 10 900/R42 9 900/60R42 10 210/95R44 (8.3R44) 7 44 2/95R44 (9.5R44) 7 270/95R44 (11.2R44) 775 270/95R46 (11.2R46) 800 0/95R46 (12.4R46) 8 320/90R46 8 3/85R46 (13.6R46) 8 380/90R46 875 46 420/80R46 875 480/80R46 9 520/85R46 (20.8R46) 975 620/70R46 975 7/75R46 1075 900/65R46 1075 2/95R48 (9.5R48) 800 48 270/95R48 (11.2R48) 8 3/85R48 (13.6R48) 875 320/90R 875 380/90R 9 420/95R 975 480/80R 975 480/95R 10 52 0/95R52 (12.4R52) 9 270/95R54 (11.2R54) 9 54 320/90R54 9 380/90R54 975 >_ >_ 8 TAURUS agricultural technical documentation 2017 Documentation technique agricole TAURUS 2017 9

Dimensional equivalences (step 2) Step 2: Based on the SRI result from step 1, determe the possible dimensional equivalences. This equivalence chart has been produced usg ETRTO data; it is not exhaustive. Please consult us for other conversions. IMPORTANT : In no case does the SRI correspond to a specific value of the rollg circumference (RC). It is only given for formation purposes only. Any change requires the front wheel lead % to be calculated usg the vehicle s transmission ratios and verify if the wheel equipment is appropriate (see technical pages). SRI EQUIVALENCES 6.R16 360 260/70R16 280/65R16 7.R16 390 2/80R16 280/70R16 320/65R16 7.R18 410 280/70R18 320/65R18 7.R20 4 280/70R20 3/65R18 9.5R20 4 475 0 5 260/80R20 0/70R20 3/65R20 11.2R20 280/85R20 320/70R20 8.3R24 2/85R24 // 9.5R24 0/70R24 320/85R20 // 12.4R24 3/75R20 360/70R20 420/65R20 280/85R24 // 11.2R24 320/70R24 380/70R20 380/75R20 // 13.6R20 14.9LR20 4/65R20 2/85R28 // 9.5R28 320/85R24 // 12.4R24 5 3/65R28 360/70R24 420/65R24 210/95R32 // 8.3R32 280/85R28 // 11.2R28 575 320/70R28 3/85R24 // 13.6R24 380/70R24 0/70R24 4/65R24 SRI 600 6 EQUIVALENCES 2/95R32 // 9.5R32 320/85R28 // 12.4R28 360/70R28 380/85R24 // 14.9R24 420/65R28 420/70R24 460/70R24 480/65R24 210/95R36 // 8.3R36 270/95R32 // 11.2R32 3/85R28 // 13.6R28 380/70R28 420/85R24 // 16.9R24 4/65R28 480/60R28 480/70R24 0/70R24 5/65R24 2/95R36 // 9.5R36 320/85R32 // 12.4R32 380/85R28 // 14.9R28 420/70R28 6 420/75R28 480/65R28 480/70R26 520/60R28 5/65R26 270/95R36 // 11.2R36 320/85R34 // 12.4R34 380/85R // 14.9R 420/70R 675 420/85R28 // 16.9R28 480/70R28 5/65R28 580/70R26 600/60R28 7/R26 SRI EQUIVALENCES 2/95R // 9.5R 270/95R38 // 11.2R38 320/85R36 // 12.4R36 420/85R // 16.9R 700 480/70R 480/75R 520/80R26 5/65R 600/60R 600/65R28 210/95R44 // 8.3R44 320/85R38 // 12.4R38 3/85R36 380/85R34 420/90R 7 460/85R // 18.4R 520/70R 600/65R 600/70R28 620/70R26 710/55R 2/95R44 // 9.5R44 270/95R42 // 11.2R42 3/85R38 // 13.6R38 380/80R38 0/75R38 // 15.5R38 420/85R34 // 16.9R34 7 480/70R34 5/65R34 600/60R34 600/70R 620/75R26 // 23.1R26 710/60R 7/65R26 1000/R 270/95R44 // 11.2R44 460/85R34 // 18.4R34 520/85R 775 520/70R34 520/75R34 600/65R34 620/70R 6/60R34 SRI EQUIVALENCES 2/95R48 // 9.5R48 270/95R46 // 11.2R46 0/95R42 // 12.4R42 320/90R42 380/95R38 800 420/85R38 // 16.9R38 480/70R38 5/65R38 600/60R38 620/75R 6/70R 6/75R 270/95R48 // 11.2R48 0/95R46 // 12.4R46 320/90R46 3/85R46 // 13.6R46 460/85R38 // 18.4R38 8 520/70R38 (1.75m)* 600/65R38 620/75R34 6/75R32 // 24.5R32 6/65R34 6/60R38 710/60R34 320/90R 3/85R48 // 13.6R48 380/90R46 420/80R46 480/80R42 // 18.4R42 520/85R38 // 20.8R38 875 580/70R38 (1.85m)* 620/70R38 6/65R38 6/75R34 680/75R32 //.5LR32 710/60R38 800/65R32 1000/55R32 10/R32 >_ SRI EQUIVALENCES 270/95R54 // 11.2R54 0/95R52 // 12.4R52 320/90R54 380/90R 480/80R46 520/85R42 // 20.8R42 620/70R42 9 6/65R42 (1.95m)* 6/75R38 680/75R38 680/85R32 710/60R42 710/70R38 710/75R34 7/65R38 800/70R32 900/R42 900/60R32 380/90R54 420/95R 480/80R 520/85R46 // 20.8R46 975 580/85R42 (2.05m)* 620/70R46 6/85R38 710/70R42 800/70R38 900/60R38 480/95R 6/85R42 710/75R42 710/85R38 900/60R42 1075 7/75R46 10 (2.15m)* (2.m)* 900/65R46 * overal given for formation only. 10 TAURUS agricultural technical documentation 2017 Documentation technique agricole TAURUS 2017 11

TAURUS tyres by dimension (step 3) RIM DIMENSIONS POINT 8 20 11.2R20 X 280/85R24 (11.2R24) X 320/70R24 X 320/85R24 (12.4R24) X 3/85R24 (13.6R24) X 360/70R24 X 24 380/70R24 X 380/85R24 (14.9R24) X 420/70R24 X 420/85R24 (16.9R24) X 4/65R24 X 480/65R24 X 480/70R24 X 280/85R28 (11.2R28) X 320/85R28 (12.4R28) X 3/85R28 (13.6R28) X 360/70R28 X 380/70R28 X 28 380/85R28 (14.9R28) X 420/70R28 X 420/85R28 (16.9R28) X 480/65R28 X 480/70R28 X 5/65R28 X 600/65R28 X 380/85R (14.9R) X 420/85R (16.9R) X 480/70R X 460/85R (18.4R) X 5/65R X 600/70R X 2/95R32 (9.5R32) X 32 270/95R32 (11.2R32) X 12.4R32 X 420/85R34 (16.9R34) X 460/85R34 (18.4R34) X 34 480/70R34 X 520/70R34 X 5/65R34 X 600/65R34 X POINT 70 POINT 7 Special POINT 65 POINT HP RC95 RIM DIMENSIONS POINT 8 2/95R36 (9.5R36) X 36 270/95R36 (11.2R36) X 12.4R36 X 13.6R36 X 270/95R38 (11.2R38) X 3/85R38 (13.6R38) X 0/75R38 (15.5R38) X 420/85R38 (16.9R38) X 460/85R38 (18.4R38) X 480/70R38 X 38 520/70R38 X 520/85R38 (20.8R38) X 580/70R38 X 600/65R38 X 6/65R38 X 6/85R38 X 710/70R38 X 270/95R42 (11.2R42) X 42 520/85R42 (20.8R42) X 620/70R42 X 6/65R42 X 44 2/95R44 (9.5R44) X 270/95R44 (11.2R44) X 46 0/95R46 (12.4R46) X 2/95R48 (9.5R48) X 48 270/95R48 (11.2R48) X 3/85R48 (13.6R48) X 380/90R X POINT 70 POINT 7 Special POINT 65 POINT HP RC95 12 TAURUS agricultural technical documentation 2017 Documentation technique agricole TAURUS 2017 13

POINT HP 200 HP and over New profi le providg: - Longevity and comfort on the road - Optimal capacity of traction and self cleang Robust casg for better durability POINT 65 80 to 200 HP Tread pattern providg greater soil protection Lower tyre pressure Improved performance Rim Section Overall Loaded Rollg Rim 75% Inner Tread (ches) mm mm mm mm litres mm 600/65 R 28 154 A8/154 B TL CAI 0872 N 28 DW20B(A) 591 1491 652 42 DW18L 5 717 48 DW18 600/70 R 158 A8/158 B TL CAI 424355 DW20B(A) 591 1602 709 47 4 737 DW18L 6/85 R 38 173 A8/173 B TL CAI 1921 N DW23B(A) 645 2071 906 6111 MW23B(A) 856 804 56 DW20B(A) 38 710/70 R 38 171 A8/171 B TL CAI 381004 N DW23B(A) 716 1959 874 5790 MW3B(A) 810 804 52 DWB(A) MWB(A) N = NEW N Dual Dual Dual Dual Please take to account the load and type of work to be performed order to adjust the pressure bar 0,8 1,0 1,2 1,4 1,6 1,8 2,0 2,1 2,4 2,8 psi 12 15 17 20 23 26 29 35 41 1 810 2 075 2 310 2 5 2 770 2 905 3 035 3 170 3 0 2 990 3 360 3 690 4 020 4 3 4 560 4 775 4 990 5 200 5 6 2 220 2 5 2 805 3 090 3 370 3 5 3 690 3 855 4 015 2 360 2 6 2 885 3 1 3 0 3 4 3 600 3 7 2 360 2 6 2 885 3 1 3 0 3 4 3 600 3 7 2 045 2 3 2 6 2 915 3 210 3 345 3 475 3 610 3 7 3 3 3 7 4 175 4 600 5 0 5 2 5 475 5 700 5 9 6 375 2 480 2 835 3 190 3 5 3 905 4 065 4 2 4 390 4 5 2 6 2 985 3 315 3 6 3 800 3 9 4 100 4 2 2 6 2 985 3 315 3 6 3 800 3 9 4 100 4 2 3 080 3 520 3 9 4 370 4 795 5 0 5 260 5 490 5 720 5 000 5 6 6 2 6 875 7 0 7 875 8 2 8 6 9 000 9 7 3 745 4 280 4 795 5 315 5 8 6 110 6 390 6 675 6 955 3 0 4 000 4 485 4 965 5 4 5 710 5 975 6 2 6 0 3 0 4 000 4 485 4 965 5 4 5 710 5 975 6 2 6 0 2 985 3 410 3 8 4 245 4 665 4 8 5 0 5 2 5 410 4 865 5 475 6 090 6 700 7 315 7 635 7 9 8 270 8 590 9 2 3 6 4 145 4 655 5 160 5 670 5 900 6 1 6 3 6 580 3 390 3 875 4 3 4 8 5 0 5 510 5 7 5 9 6 1 3 390 3 875 4 3 4 8 5 0 5 510 5 7 5 9 6 1 Rim Section Overall Loaded Rollg Rim 75% Inner Tread (ches) mm mm mm mm litres mm 4/65 R 24 128 A8/128 B TL CAI 529617 N DW14L 441 1182 528 37 W13-DW13 W14L 177 703 39 W15L-DW15L 24 480/65 R 24 133 A8/133B TL CAI 224881 N DW15L 471 1234 548 3657 W14L-DW14L 218 710 W15L 28 480/65 R 28 136A8/136B TL CAI 632102 DW15L-W15L 479 1337 591 3959 W14L-DW14L 241 822 42 5/65 R 28 142 A8/142 B TL CAI 9872 529 1414 622 4187 DW16L-W16L DW18L 316 822 45 5/65 R 143 A8/143 B TL CAI 391329 DW16L-W16 522 1470 648 4347 DW18L-W18L 333 754 45 N = NEW Dual Dual Please take to account the load and type of work to be performed order to adjust the pressure bar 0,6 0,8 1,0 1,2 1,4 1,6 2,0 2,1 psi 9 12 15 17 20 23 29 1045 1200 1365 1475 1585 1645 18 20 2180 23 2700 1260 1455 1660 1790 19 1360 15 1675 1800 1360 15 1675 1800 1200 1365 15 1680 1815 1860 20 2235 24 26 90 1420 1660 1875 20 2205 15 17 1905 2060 15 17 1905 2060 1995 2235 2475 2780 90 33 1560 1795 2035 2220 20 16 1900 2070 22 16 1900 2070 22 2000 2335 2665 00 32 30 00 1605 1870 2135 20 2620 28 17 2000 22 2445 26 2000 22 2445 26 2480 2785 90 3475 3860 90 19 2190 2460 2690 2915 2060 20 10 27 2060 20 10 27 For use fields without sustaed high torque: please see the 10 LT le. For use fields with sustaed high torque: please see our le. For front loader use: please see the 10 LT le. ➀ and ➁: For general technical formation, please read p. 6 and p. 29. For use fi elds without sustaed high torque: please see the 10 LT le. For use fi elds with sustaed high torque: please see our le. For front loader use: please see the 10 LT le. ➀ and ➁: For general technical formation, please read p. 6 and p. 29. 14 TAURUS agricultural technical documentation 2017 TAURUS agricultural technical documentation 2017 15

POINT 65 80 to 200 HP POINT 70 60 to 180 HP Rim Section Overall Loaded Rollg Rim 75% Inner Tread (ches) mm mm mm mm litres mm 5/65 R 34 145 A8/145 B TL CAI 688712 DW16L 5 1560 692 4621 W16L 363 704 44 W18L- W18L 34 600/65 R 34 151 A8/151 B TL CAI 681849 DW20 (A) 591 1644 736 4880 460 823 47 W18L-DW18L 600/65 R 38 153 A8/153 B TL CAI 579551 N DW20B(A) 591 1745 787 5188 W18L 498 8 51 38 DW18L 6/65 R 38 157 A8/157 B TL CAI 764412 N 42 645 1811 812 5378 DW20B(A) 598 8 52 6/65 R 42 158 A8/158 B TL CAI 271958 633 1924 858 5708 DW20B(A) 642 802 52 N = NEW Dual Dual Please take to account the load and type of work to be performed order to adjust the pressure bar 0,6 0,8 1,0 1,2 1,4 1,6 2,0 2,1 psi 9 12 15 17 20 23 29 14 1700 19 2200 2375 23 2610 2895 3180 3465 37 42 43 1765 2070 2370 2675 2890 3105 16 1935 2215 20 2700 2900 16 1935 2215 20 2700 2900 19 2265 2790 35 3110 3485 3860 4190 4520 5175 2420 2755 3105 30 3690 75 2900 3175 34 75 2900 3175 34 3290 3690 90 4435 4780 5475 29 32 3580 3905 2735 75 3360 36 2735 75 3360 36 3680 4145 4610 4995 5380 61 2880 3290 3665 4415 3265 37 39 41 3265 37 39 41 29 30 80 4655 5235 5810 60 65 3610 41 43 45 2360 2865 3370 3875 60 42 2360 2865 3370 3875 60 42 Rim Section Overall Loaded Rollg Rim 75% Inner Tread (ches) mm mm mm mm litres mm 320/70 R 24 TL 116 A8/116 B CAI 723294 311 1092 495 32 104 692 39 24 360/70 R 24 TL 122 A8/122 B CAI 007646 357 1152 514 3416 123 692 380/70 R 24 TL 1 A8/1 B CAI 604562 380 1190 5 3521 139 700 41 W13 420/70 R 24 TL 1 A8/1 B CAI 6770 W13 415 1245 553 3690 193 703 42 W14L-DW14L 480/70 R 24 TL 138 A8/138 B CAI 928586 DW15L-W15L 479 1316 577 3888 W14L-DW14L 2 710 45 W16L-DW16L Wider tyres result more benefi ts when workg the land Heavy-duty design for agricultural work Please take to account the load and type of work to be performed order to adjust the pressure bar 0,8 1,0 1,2 1,4 1,6 1,8 2,00 psi 12 15 17 20 23 26 29 11 15 1385 1515 1645 1770 1900 8 980 1105 12 1360 800 910 10 11 12 12 13 1485 1635 1785 1935 2090 22 10 1170 1315 1460 1600 9 1090 12 1360 10 10 14 1610 1775 19 2105 2265 24 1120 1280 1435 1590 17 1060 1210 1355 10 16 16 1700 1900 2100 20 20 2700 2900 1320 15 1690 1875 2060 1215 1385 1560 17 1900 1900 2095 2335 80 2820 65 35 35 1600 18 20 2275 20 10 1715 19 2145 2360 2360 For use fi elds without sustaed high torque: please see the 10 LT le. For use fi elds with sustaed high torque: please see our le. For front loader use: please see the 10 LT le. ➀ and ➁: For general technical formation, please read p. 6 and p. 29. For use fi elds without sustaed high torque: please see the 10 LT le. For use fi elds with sustaed high torque: please see our le. For front loader use: please see the 10 LT le. ➀ and ➁: For general technical formation, please read p. 6 and p. 29. 16 TAURUS agricultural technical documentation 2017 TAURUS agricultural technical documentation 2017 17

POINT 70 60 to 180 HP POINT 7S 60 to 180 HP Rim (ches) 28 34 38 42 : see page 19. Section Overall Loaded Rollg Rim 75% Inner Tread mm mm mm mm litres mm 360/70 R 28 TL 1 A8/1 B CAI 423583 357 11 563 3717 138 726 380/70 R 28 TL 127 A8/127 B CAI 5953 380 1293 583 3842 156 732 41 W13 420/70 R 28 TL 133 A8/133 B CAI 212493 W13 419 13 605 08 219 821 42 W14L-DW14L 480/70 R 28 TL 1 A8/1 B CAI 976420 DW15L-W15L 476 1422 633 4214 W14L-DW14L 292 822 46 W16L-DW16L 480/70 R TL 141 A8/141 B CAI 683605 DW15L-W15L 479 1480 661 4392 W14L-DW14L 6 754 45 W16L-DW16L 480/70 R 34 TL 143 A8/143 B CAI 369476 DW15L-W15L 468 1583 709 4701 W14L-DW14L 333 704 48 W16L-DW16L 520/70 R 34 TL 148 A8/148 B CAI 061874 DW16L-W16L 9 1641 735 4874 W15L-DW15L 398 823 48 W18L-DW18L 480/70 R 38 TL 145 A8/145 B CAI 794424 DW15L-W15L 474 1684 759 10 W14L-DW14L 361 786 48 W16L-DW16L 520/70 R 38 TL 1 A8/1 B CAI 2048 DW16L-W16L 515 1762 789 5229 W15L-DW15L 433 824 48 W18L-DW18L 580/70 R 38 TL 155 A8/155 B CAI 6420 DW18L 560 1831 820 5436 557 8 51 W18L 620/70 R 42 TL 160 A8/160 B CAI 680909 DW20B (A) 6 1935 861 5736 DW18L 657 802 53 N N = NEW Dual Please take to account the load and type of work to be performed order to adjust the pressure bar 0,8 1,0 1,2 1,4 1,6 1,8 2,00 psi 12 15 17 20 23 26 29 14 1610 1775 19 2105 2265 24 1120 1280 1435 1590 17 10 1185 13 1495 16 16 1580 1755 1935 2115 2295 2470 26 1215 1385 1560 17 1900 1120 1280 1435 1590 17 17 1810 2020 22 2445 2655 2865 75 10 1595 1790 1985 2180 1320 15 1690 1875 2060 2060 22 20 27 00 32 30 37 1700 1955 2210 2470 27 1600 18 20 2275 20 20 2320 80 28 95 3355 3615 3875 17 2010 2275 2800 16 1880 2110 2345 75 75 2390 2655 29 3195 3465 37 00 18 2110 2375 26 2900 1700 1955 2210 2470 27 27 2745 55 3370 3685 00 4310 46 2120 24 2735 33 2000 2290 75 2860 31 31 95 2895 3190 3485 3780 80 4375 2000 2290 75 2860 31 18 2110 2375 26 2900 2900 05 3365 3720 80 4435 4795 51 20 26 2975 3310 36 2180 2470 2765 60 33 33 3465 3855 4245 46 20 5410 5800 26 20 3390 3755 41 20 2845 3190 35 3875 3875 2495 2855 3210 3585 3960 3535 3905 44 49 5475 6110 67 35 3470 3905 4360 4815 2835 3245 36 75 Rim (ches) 38 Section Overall Loaded Rollg Rim 75% Inner Tread mm mm mm mm litres mm 0/75 R 38 TL 138 A8/135 B (15,5 R38) CAI 924529 DW14L 4 1565 708 4711 -D 234 796 42 W14L Special tread pattern Outstandg traction Effective self-cleang grooves Tubeless Please take to account the load and type of work to be performed order to adjust the pressure bar 0,6 0,8 1,0 1,2 1,4 1,5 1,6 1,7 1,8 1,9 2,0 psi 9 12 15 17 20 22 23 26 28 29 1590 1870 2145 24 2705 2845 2985 3120 3260 30 35 1370 1600 1835 2065 20 2415 1690 1915 2135 22 2360 17 1935 20 2120 For use fi elds without sustaed high torque: please see the 10 LT le. For use fi elds with sustaed high torque: please see our le. For front loader use: please see the 10 LT le. ➀ and ➁: For general technical formation, please read p. 6 and p. 29. 18 TAURUS agricultural technical documentation 2017 TAURUS agricultural technical documentation 2017 19

Rim (ches) 20 24 POINT 8 60 to 180 HP Section Overall Loaded Rollg Rim 75% Inner Tread mm mm mm mm litres mm 11.2 R 20 TL 111 A8/108 B CAI 0818 295 995 446 2954 W7 75 542 37 W8 W9 11.2 R 24 TL 114 A8/111 B CAI 523567 283 1084 497 33 80 692 42 W9 12.4 R 24 TL 119 A8/116 B CAI 039023 3 1141 517 3396 W9 116 692 42 13.6 R 24 TL 121 A8/118 B CAI 039029 359 1196 536 3578 137 700 46 14.9 R 24 TL 126 A8/123 B CAI 733804 W13 390 12 561 3710 176 703 46 16.9 R 24 TL 134 A8/131 B CAI 615665 DW15L 454 1324 594 3933 W14L-DW14L 228 710 44 W15L Standard tyre boastg a modern profi le Tubeless Please take to account the load and type of work to be performed order to adjust the pressure bar 0,6 0,7 0,8 0,9 1,0 1,1 1,2 1,3 1,4 1,5 1,6 psi 9 10 12 13 15 16 17 19 20 22 23 780 880 980 10 1070 1155 12 1275 1310 1385 1460 6 7 810 8 890 960 10 1055 1080 1145 1210 620 700 780 820 860 9 990 1015 10 1105 1170 580 655 7 765 800 865 9 9 975 10 1090 8 865 890 9 990 820 9 10 1090 11 12 13 1380 1420 10 1580 680 770 860 900 9 10 1110 1145 1180 1245 1310 660 745 8 870 910 990 1070 1100 11 1195 1260 615 695 775 810 8 9 1000 10 1060 1120 1180 910 935 960 1015 1070 9 1080 1210 1275 13 14 15 1585 16 17 1820 790 895 1000 1055 1110 1195 1280 1315 13 14 1510 760 860 960 1015 1070 11 12 1265 10 1380 1460 710 805 900 9 1000 1075 11 1180 1215 1290 1360 10 1080 1110 1175 12 1010 11 1270 13 1380 1480 1580 16 1680 1810 19 8 9 10 1095 11 12 1310 13 1390 10 1610 800 910 1020 1060 1100 1180 1260 10 13 1445 15 7 8 9 990 10 1105 1180 1215 12 13 14 1070 1105 11 12 1320 1170 1335 10 1565 16 1755 1880 1945 2010 2145 2280 970 1105 12 1295 13 14 15 1610 1670 1780 1890 9 1070 1200 12 10 10 10 1555 1610 1715 1820 875 995 1120 1170 1215 1310 10 14 10 1600 1700 1270 1320 1370 1460 15 1270 14 16 1810 1990 2170 23 2470 95 2720 28 10 1200 1345 1495 1645 1790 19 20 2145 22 23 1020 1160 15 1445 1585 17 1870 1970 2070 2170 2270 9 1085 1215 13 1615 17 18 1935 20 2120 10 1600 1700 1800 1900 28 32 Rim Section Overall Loaded Rollg Rim 75% Inner Tread (ches) mm mm mm mm litres mm 11.2 R 28 TL 116 A8/113 B CAI 093269 291 1201 554 3622 99 7 43 W9 12.4 R 28 TL 121 A8/118 B CAI 039032 323 14 573 3770 W9 127 726 43 13.6 R 28 TL 123 A8/120 B CAI 093283 370 1284 579 3817 1 732 45 14.9 R 28 TL 128 A8/1 B CAI 869675 W13 6 1347 604 3999 192 821 43 16.9 R 28 TL 136 A8/133 B CAI 039043 DW15L 446 1418 628 42 W14L-DW14L 248 822 48 W15L 14.9 R TL 129 A8/126 B CAI 527022 W13 384 18 633 4185 210 734 46 16.9 R TL 137 A8/134 B CAI 093248 DW15L 452 1463 655 4343 W14L-DW14L 267 754 48 W15L 18.4 R TL 142 A8/139 B CAI 039066 DW16L 467 1545 675 4613 W15L-DW15L 349 757 49 W16L 12.4 R 32 TL 122 A8/119 B CAI 093280 327 13 611 16 137 760 45 POINT 8 60 to 180 HP Please take to account the load and type of work to be performed order to adjust the pressure bar 0,6 0,7 0,8 0,9 1,0 1,1 1,2 1,3 1,4 1,5 1,6 psi 9 10 12 13 15 16 17 19 20 22 23 870 990 1110 1175 12 13 1420 1460 10 1590 1680 720 820 920 975 10 1105 1180 1210 12 1315 1390 700 790 880 935 990 1060 11 1165 1200 1270 13 6 7 8 875 9 995 1060 1090 1120 1185 12 960 990 1020 1080 11 10 1175 1310 1365 1420 15 16 1700 1770 1855 19 860 970 1080 11 1180 1265 13 1410 1470 15 1610 8 935 10 1085 11 1215 10 1355 1410 1480 15 775 875 975 1020 1060 11 1215 1270 1320 1385 14 1110 1155 1200 1260 1320 1070 1205 13 10 1460 1590 1720 1770 1820 19 2080 890 1000 1110 1160 1210 1320 14 1470 1510 1615 1720 860 965 1070 1120 1170 1270 1370 1415 1460 1560 1660 800 900 1000 1045 1090 1190 1285 1320 1360 1455 15 1170 1205 12 13 1410 1270 14 1580 1675 1770 1890 2010 2075 21 2275 2410 10 1180 1310 1390 1470 1570 1670 17 1780 1890 2000 1020 11 1260 1335 1410 1510 1610 1660 1710 1820 19 9 1065 1180 12 1320 1410 10 15 1600 1700 1800 1370 1415 1460 15 16 15 17 19 20 21 2310 2480 45 2610 2805 00 1280 1445 1610 1695 1780 1915 20 2105 2160 23 2490 12 1390 15 16 1710 1845 1980 2035 2090 2245 20 11 10 14 15 1600 17 18 1900 19 2095 22 1680 17 1770 1905 20 1310 1470 16 17 1820 19 2080 2145 2210 2345 2480 1080 1215 13 14 1510 1615 1720 1775 18 19 20 10 1170 10 1380 1460 1560 1660 1715 1770 1875 1980 975 1095 1215 1290 1360 1455 15 1600 16 17 18 1410 1455 10 1590 1680 1580 1795 2010 2110 2210 2380 2615 2680 2880 80 1310 1490 1670 17 18 1970 2110 2165 2220 2385 1260 1435 1610 1690 1770 1900 20 2085 21 20 2460 1180 13 10 1575 16 1775 1900 19 2000 21 20 17 1775 1820 1955 2090 1880 2115 23 2480 2610 2805 00 80 3160 3355 35 15 1745 19 20 2160 23 2490 55 2620 2780 29 10 1685 1870 1980 2090 2245 20 2465 2685 28 10 1575 17 18 19 2095 22 20 2360 26 20 2095 21 2280 2410 10 1190 13 10 1460 1570 1680 17 1820 1915 2010 860 985 1110 1160 1210 10 1390 14 1510 1590 1670 8 9 1070 1120 1170 15 13 10 1460 1535 1610 775 890 1000 1045 1090 1170 12 15 1360 14 10 11 1190 12 15 1370 For use fields without sustaed high torque: please see the 10 LT le. For use fields with sustaed high torque: please see our le. For front loader use: please see the 10 LT le. ➀ and ➁: For general technical formation, please read p. 6 and p. 29. For use fi elds without sustaed high torque: please see the 10 LT le. For use fi elds with sustaed high torque: please see our le. For front loader use: please see the 10 LT le. ➀ and ➁: For general technical formation, please read p. 6 and p. 29. 20 TAURUS agricultural technical documentation 2017 Documentation technique agricole TAURUS 2017 21

POINT 8 60 to 180 HP RC 95 Soilsaver Row Crop 34 36 38 42 Rim Section Overall Loaded Rollg Rim 75% Inner Tread (ches) mm mm mm mm litres mm 16.9 R 34 TL 139 A8/136 B CAI 039010 DW15L 448 1573 706 4672 W14L-DW14L 288 704 48 W15L 18.4 R 34 TL 144 A8/141 B CAI 6296 DW16L 480 1646 7 4890 W15L-DW15L 361 823 49 W16L 12.4 R 36 TL 124 A8/121 B CAI 039036 318 1455 668 4375 152 779 43 W16L 13.6 R 36 TL 127 A8/124 B CAI 039039 364 10 685 4473 189 780 45 13.6 R 38 TL 128 A8/1 B CAI 039041 D 369 1559 710 4646 206 795 46 16.9 R 38 TL 141 A8/138 B CAI 093446 DW15L 439 1677 757 W14L-DW14L 312 786 49 W15L 18.4 R 38 TL 146 A8/143 B CAI 521555 DW16L 498 1755 783 5205 W15L-DW15L 417 824 47 W16L 20.8 R 38 TL 153 A8/1 B CAI 413224 DW18L 5 1846 822 5473 W16L-DW16L 510 8 W18L 20.8 R 42 TL 155 A8/152 B CAI 659276 DW18L 523 19 870 5761 W16L-DW16L 547 802 W18L 22 TAURUS agricultural technical documentation 2017 bar 0,6 0,7 0,8 0,9 1,0 1,1 1,2 1,3 1,4 1,5 1,6 psi 9 10 12 13 15 16 17 19 20 22 23 1675 18 2010 2180 2345 10 2680 2770 2860 29 1390 15 1670 1805 1945 2080 2220 23 2460 75 2695 13 1475 1605 17 1875 2005 21 25 2370 2485 2600 12 1375 10 16 17 1875 2000 2110 2215 2320 24 1820 1920 2015 2110 2210 2010 2280 2655 2760 10 3260 3355 34 3600 37 1670 1890 2110 2200 2290 2495 2700 2780 2860 2985 3110 1610 1820 20 2115 2200 20 2600 2680 2760 2880 00 10 1700 1900 1980 2060 2245 24 20 75 2690 2800 2210 2275 23 2445 11 1280 1420 1480 15 1680 1820 1880 19 20 21 9 1060 1180 12 1280 1395 1510 1560 1610 1695 1780 910 1020 11 1180 12 1345 1460 15 15 16 1710 8 955 1060 1105 11 15 1360 15 14 15 1600 12 1280 1320 1390 1460 12 1410 1580 16 1720 1865 2010 2045 2080 2215 23 10 1170 1310 1370 14 15 1670 1695 1720 18 19 990 11 1260 1315 1370 1490 1610 1635 1660 1765 1870 9 10 1180 12 1285 1390 10 15 15 16 17 1370 1390 1410 10 1590 1270 14 1580 1675 1770 1890 2010 2075 21 2275 2410 10 1180 1310 1390 1470 1570 1670 17 1780 1890 2000 1020 11 1260 1335 1410 1510 1610 1660 1710 1820 19 9 1065 1180 12 1320 1410 10 15 1600 1700 1800 1370 1415 1460 15 16 1770 20 2280 2380 2480 2660 28 2920 00 32 34 1470 1680 1890 1970 20 2200 23 2420 2490 2675 2860 1410 1615 1820 1900 1980 21 2270 2335 20 80 2760 1320 1510 1700 1775 18 1985 2120 2180 22 2410 75 19 1985 20 2190 23 21 2410 2680 2800 2920 3185 34 35 36 3835 20 1780 2000 2220 2320 2420 26 2860 29 20 3175 33 1710 19 21 2235 23 45 2760 28 2920 65 3210 1600 1800 2000 2090 2180 2380 75 26 27 2860 00 23 2410 2480 2605 27 2610 2935 3260 35 35 3835 4120 42 4360 46 4890 2160 24 2700 2820 29 3175 3410 3510 3610 38 2090 2345 2600 2720 28 65 3290 3385 3480 3695 3910 19 2190 24 26 2860 75 3160 32 34 36 2800 2880 2960 31 3320 2760 3290 3560 38 90 4355 4565 4775 4985 5195 2285 27 29 3170 3390 3610 3780 3955 41 2205 2420 26 28 55 3270 3480 36 3815 3980 4145 2060 2260 2455 2655 2855 32 3410 3565 3720 3875 2960 3100 3245 30 35 For use fields without sustaed high torque: please see the 10 LT le. For use fields with sustaed high torque: please see our le. For front loader use: please see the 10 LT le. ➀ and ➁: For general technical formation, please read p. 6 and p. 29. Please take to account the load and type of work to be performed order to adjust the pressure 32 Sgle fi tment Recommended for crop applications: fertilisg, sowg, irrigatg and sprayg. Rim Section Overall Loaded Rollg Rim 75% Inner Tread (ches) mm mm mm mm litres mm 2/95 R 32 TL 126 A8/126 B**** (9,5 R32) CAI 068388 W8 228 12 579 3768 75 758 33 W7 270/95 R 32 TL 134 A8/134 B**** (11,2 R32) CAI 000213 W8 284 17 602 3935 105 763 36 Work more land less time Combed fi tment (tyre featurg a combed standard/row crop section) Recommended for use highly demandg fields, where height is key 10cyc cyc 10cyc cyc Please take to account the load and type of work to be performed order to adjust the pressure For use fi elds without sustaed high torque: please see the 10 LT le. For use fi elds with sustaed high torque: please see our le. For front loader use: please see the 10 LT le. ➀ and ➁: For general technical formation, please read p. 6 and p. 29. ➂ FRT : Free Rollg Tyre eg. trailed sprayer. Tw fi tment For crops: fertilisg, sowg, irrigatg and sprayg For harvestg periods FRT ➂ / bar 1,6 2,00 2, 2,80 3,20 3, 3,60 4,00 4, psi 23 29 35 41 48 49 52 58 64 14 1655 1880 20 2220 2310 20 1310 14 15 16 1795 1870 19 1280 1395 1510 1610 17 1820 1890 12 1345 1460 15 1685 17 1820 11 15 1360 14 1575 16 1700 2 0 1360 14 1575 16 1700 1 8 1770 2085 20 2775 2890 00 3180 19 2110 2265 23 2420 1610 17 1890 20 2200 2275 23 15 1685 1820 1980 21 2200 2270 14 1575 1700 18 1985 20 2120 2 545 1700 18 1985 20 2120 2 310 TAURUS agricultural technical documentation 2017 23

RC 95 Soilsaver Row Crop RC 95 Soilsaver Row Crop Rim Section Overall Loaded Rollg Rim 75% Inner Tread (ches) mm mm mm mm litres mm 2/95 R 36 TL 128 A8/128 B**** (9,5 R36) CAI 937266 36 38 42 44 46 W8 234 1356 632 91 84 779 33 W7 270/95 R 36 TL 137 A8/137 B**** (11,2 R36) CAI 313216 W8 287 1414 655 4263 120 779 35 270/95 R 38 TL 138 A8/138 B**** (11,2 R38) CAI 703528 W8 275 1473 683 4442 120 779 35 -D 270/95 R 42 TL 1 A8/1 B**** (11,2 R42) CAI 916185 W8 297 1566 731 4727 129 / 35 2/95 R 44 TL 132 A8/132 B**** (9,5 R44) CAI 768671 W8 228 1555 732 4698 99 / 33 W7 270/95 R 44 TL 141 A8/141 B**** (11,2 R44) CAI 8928 W8 263 1632 762 4926 135 813 39 0/95 R 46 TL 146 A8/146 B**** (12,4 R46) CAI 455904 6 1738 809 5244 183 835 D cyc cyc cyc cyc cyc cyc cyc bar 1,6 2,00 2, 2,80 3,20 3, 3,60 4,00 4, psi 23 29 35 41 48 49 52 58 64 10 1770 20 2180 2365 2460 2700 1390 1520 16 1770 1910 1980 20 13 1480 1610 1720 1860 19 2000 10 14 15 1660 1795 1860 19 1215 13 14 15 1675 17 1800 2 160 14 15 1675 17 1800 1 960 1880 2215 2700 29 60 3180 34 1770 1910 20 2280 24 35 2620 1720 1860 2000 2220 2385 2470 1660 1795 19 21 20 2380 2460 15 1675 1800 2000 21 22 20 2 760 1800 2000 21 22 20 2 5 19 2280 26 2780 31 3270 35 1820 1965 2110 23 20 2605 2690 1780 1915 20 2290 2455 2620 1710 1845 1980 2200 2365 24 1600 17 18 2060 2210 2285 2360 2 8 18 2060 2210 2285 2360 2 570 20 2410 2780 29 3190 3320 34 37 19 2080 2220 2420 2635 27 28 1890 20 2160 23 65 2670 2780 1820 1955 2090 2270 2475 80 2680 1700 18 19 2120 2310 20 3 000 19 2120 2310 20 2 7 1680 1965 22 20 26 27 28 00 15 1685 1820 2000 21 2210 2280 1510 1645 1780 19 2080 21 2220 1460 1585 1710 1870 2005 2070 21 1360 1480 1600 17 1875 19 2000 2 0 1600 17 1875 19 2000 2 180 2100 2475 28 00 3320 3485 3645 3865 19 2110 2280 2490 2710 28 2935 1890 2055 2220 2420 26 2755 2865 1820 1980 21 23 26 2755 1700 18 2000 2180 2380 2475 75 3 090 2000 2180 2380 2475 75 2 810 2955 3360 36 39 60 4200 23 60 2770 20 3220 3320 3420 2290 2495 2700 29 3135 32 33 2200 20 2600 28 3120 3210 2060 2245 24 26 28 2910 00 3 600 24 26 28 2910 00 3 270 For use fields without sustaed high torque: please see the 10 LT le. For use fields with sustaed high torque: please see our le. For front loader use: please see the 10 LT le. ➀ and ➁: For general technical formation, please read p. 6 and p. 29. ➂ FRT : Free Rollg Tyre eg. trailed sprayer. Please take to account the load and type of work to be performed order to adjust the pressure Rim Section Overall Loaded Rollg Rim 75% Inner Tread (ches) mm mm mm mm litres mm 2/95 R 48 TL 134 A8/134 B**** (9,5 R48) CAI 917726 For use fields without sustaed high torque: please see the 10 LT le. For use fields with sustaed high torque: please see our le. For front loader use: please see the 10 LT le. ➀ and ➁: For general technical formation, please read p. 6 and p. 29. ➂ FRT : Free Rollg Tyre eg. trailed sprayer. 24 TAURUS agricultural technical documentation 2017 Documentation technique agricole TAURUS 2017 48 249 1671 788 W8 107 835 33 270/95 R 48 TL 142 A8/142 B**** (11,2 R48) CAI 177624 W8 275 1732 812 5231 146 835 39 3/85 R 48 TL 151 A8/151 B**** (13,6 R48) CAI 648643 369 1774 829 5356 213 / 38 380/90 R TL 160 A8/160 B*** CAI 332270 DW13A 380 1954 913 5858 D- 329 / 43 W13A N Please take to account the load and type of work to be performed order to adjust the pressure bar 1,6 2,00 2, 2,80 3,20 3, 3,60 4,00 4, psi 23 29 35 41 48 49 52 58 64 FRT ➂ / FRT ➂ / N = NEW cyc cyc cyc cyc 1770 20 23 2480 27 2870 00 3180 16 1765 1880 2110 2265 23 2420 1610 1720 18 20 2200 2275 23 15 1660 1770 1980 21 2200 2270 14 15 16 18 1985 20 2120 2 545 16 18 1985 20 2120 2 310 22 26 00 3180 3465 3610 37 3980 20 2235 2420 2620 2820 2920 20 2000 2175 23 2745 28 29 19 2100 2270 2460 26 2745 28 1800 1960 2120 20 2475 60 26 3 180 2120 20 2475 60 26 2 890 28 3355 3860 90 4410 4570 47 5180 2620 2865 3110 3420 35 3800 39 2785 20 33 3455 3705 38 2460 2690 2920 3210 33 3570 3690 20 10 27 00 3110 33 34 4 1 27 00 3110 32 34 3 760 35 43 4760 5175 5380 5590 6000 62 35 3875 4210 4545 4880 5185 5490 35 3620 3935 42 45 4700 4845 51 3220 35 38 4135 4290 4580 4720 00 3100 3395 3690 3985 41 4415 45 4815 5 780 ➃ 2900 3175 34 37 3860 41 42 5 2 ➃

Inner tube references Ø Valve Valve CAI Size rim reference offset KLEBER KLEBER 6 3. + 4.00 10SC29 0 826 158611 8 4.00 10SCH 0 360 1528 12 4.00 TR13 13 12C13* 1674* 7.00 TR15 389 101397 15 4.00 TR13 15 15CB13** 1682** 5.00 + 6.70 TR13 22 15F13** 1622** 15,3 10.0/75 + 11.5/80 + 12.5/80 TR15 80 463 170029 4. TR218A 19 420 101467 5. + 6.00 TR15 60 182 170010 6.00 + 6. TR218A 60 313 039318 6. + 7.00 TR15 65 311 170014 16 TR218A 70 431 170000 7. TR15 70 317 170016 10.00 + 11.00 TR218A 90 485 1700 11LR + 260/70 + 280/70 TR218A 65 184 171108 10. + 270/65 + 275/65 + 320/65 TR218A 65 827 813635 16,5 260/70 + 265/70 + 0/70 + 5/70 TR218A 65 184 171108 7. TR218A 70 4 170001 TR15 70 441 170023 18 10.5/80 + 280/80 + 260/70 + 280/70 + 270/65 TR218A 70 438 171109 12.0 + 12.5 + 335/80 + 3/80 + 320/65 + 3/65 TR218A 90 444 1700 12.0 + 12.5 + 335/80 + 3/80 13/65 + 320/65 + 335/65 + 3/65 TR15 80 828 057866 4.00 + 4. TR13 15 446 101417 19 TR13 449 320346 6.00 TR15 452 170026 7. TR218A 65 655 170004 7. + 190 TR15 60 660 170033 9.5 + 260/70 + 280/70 TR218A 65 533 171110 10.00 582 0 20N** 101162 1123 0 development 20 10.5 + 11.2 + 280/80 + 0/70 + 320/70 TR218A 90 542 171111 12.4 + 320/85 + 12.5/80 + 335/80 + 3/80 + 3/75 TR218A 90 444 1700 12.5 + 14.5 + 14.9 + 335/80 + 3/80 3/75 +375/75 + 380/75 + 420/75 + 4/75 TR218A 90 664 171112 360/70 + 0/70 + 5/70 + 420/65 + 4/65 20,5 20.5 + 5/65 1964 75 19.5/20.5 UD** 101280 24 1837 100 20.5WAMD** 101331 8.3 + 9.5 + 2/85 TR218A 70 686 170035 11.2 + 12.4 + 280/85 + 320/85 + 320/70 + 360/70 TR218A 85 692 170037 13.6 + 14.5 + 3/85 + 380/70 + 420/65 TR218A 85 700 170039 24 14.9 + 380/85 + 0/80 + 0/70 + 420/70 + 4/65 TR218A 127 703 171114 16.9 + 17.5LR + 19.5LR + 420/85 + 4/80 4/70 + 445/70 + 460/70 + 480/70 + 495/70 + 0/70 + 5/70 TR218A 100 710 170042 480/65 + 5/65 18.4 + 480/80 + VF520/80 480/70 + 520/70 + 580/70 + VF620/70 TR218A 90 716 170047 26 23.1 + 620/75 + 580/70 + 620/70 TR218A 110 8 823746 620/70 TR218A 110 717 101447 7/65 TR218A 160 833 9774 26,5 600/55 TR218A 90 716 170047 Ø Valve Valve CAI Size rim reference offset KLEBER KLEBER 9.5 + 11.2 + 280/85 TR218A 65 7 1700 12.4 + 320/85 + 360/70 TR218A 85 726 170051 13.6 + 3/85 + 380/70 + 420/65 TR218A 85 732 170053 28 14.9 + 380/85 + 420/70 + 4/65 + VF480/60 TR218A 85 821 170148 16.9 + 19.5LR + 420/85 + 4/80 480/70 + 480/65 + 5/65 + VF520/60 + VF600/60 TR218A 120 822 170149 600/70 + 600/65 TR218A 110 717 101447 14.9 + 380/85 + 420/70 TR218A 90 734 170054 16.9 + 420/90 + 420/85 + 420/80 + 480/70+ 5/65 + VF5/65 TR218A 95 754 170058 18.4 + 460/85 + 520/70 + VF600/60 TR218A 95 757 170060 23.1 + VF520/85 + 620/75 + IF620/75 + VF620/75 600/70 + IF600/70 + VF620/70 TR218A 90 737 1921 8.3 + 9.5 + 210/95 + 2/95 TR218A 70 758 013109 11.2 + 270/95 TR218A 70 763 9833 32 12.4 + 320/85 TR218A 90 760 877890 24.5 +.5 + 680/85 + IF680/85 + 6/75 + 680/75 800/70 + IF800/70 + 800/65 + IF800/65 + 900/60 + IF900/60 TR218A 170 831 664520 16.9 + 380/85 + VF380/85 + 420/85 + VF420/85 480/70 + IF480/70 + 5/65 TR218A 95 704 171115 34 18.4 + 460/85 + 0/70 + 520/70 + 5/70 600/65 + IF6/65 + VF600/60 + IF6/60 TR218A 100 823 1701 24.5 + 710/75 TR218A 180 765 101429 36 9.5 + 11.2 + 12.4 + 2/95 + 270/95 + 320/85 TR218A 65 779 170072 13.6 + 3/85 TR218A 80 780 170073 11.2 + 12.4 + 270/95 + 320/85 TR218A 65 779 170072 13.6 + 380/95 + VF380/95 + 3/85 + 380/80 + VF380/80 TR218A 90 795 170079 14.9 + 16.9 + 380/85 + 420/85 + 480/70 TR218A 95 786 170076 15.5 + 380/95 + VF380/95 + 380/80 + VF380/80 + 0/75 TR218A 90 796 118826 38 18.4 + 460/85 + 520/70 + 5/65 + VF600/60 TR218A 100 824 170151 20.8 + 520/85 + 580/70 + 620/70 600/65 + 6/65 + IF6/65 + VF6/60 + IF710/60 + VF710/60 TR218A 105 8 170152 6/85 + IF6/85 + IF710/85 6/75 + IF6/75 + IF680/75 + 710/70 + IF800/70 TR218A 105 804 170088 16.9 + 18.4 + 480/80 TR218A 90 801 170084 42 20.8 + 520/85 + VF520/85 + 580/85 + VF6/85 IF710/75 + 620/70 + 710/70 + IF710/70 TR218A 1 802 170006 + 6/65 + VF6/65 + VF710/60 44 11.2 + 270/95 TR218A 80 813 4524 46 12.4 + 14.9 + 0/95 + 420/85 + 380/90 + VF380/90 + 420/80 TR218A 80 835 203376 18.4 + 20.8 + 520/85 + 480/80 + VF480/80 TR218A 100 834 467962 48 9.5 + 11.2 + 2/95 + 270/95 TR218A 80 835 203376 320/90 TR218A 70 816 170007 52 12.4 + 0/95 TR218A 70 816 170007 54 11.2 + 270/95 + 320/90 TR218A 70 816 170007 * Passenger car ner tube ** Truck ner tube 26 TAURUS agricultural technical documentation 2017 Documentation technique agricole TAURUS 2017 27

Valves characteristics Rim and O-rim references 10 SC29 10 SCH TR13 (ETRTO = V2-01-1) TR15 (ETRTO = V2-01-2) TR218A (ETRTO = V7-01-1) Air / water valves 1964 Valve reference 1837 Correspondences: TRA = TRJ6 ETRTO = V5-04-1 28 TAURUS agricultural technical documentation 2017 INNER TUBE VALVES Photo TUBELESS VALVE AIR / WATER VALVE CORE Characteristics A = 15 mm B = 29 mm α = 90 Ø = valve hole = 10 mm A = 13 mm B = 27 mm α = 1 Ø = valve hole = 10,2 mm L = 35 mm Ø = valve hole = 11,5 mm L = 35 mm Ø = valve hole = 16 mm L = 47,5 mm Ø = valve hole = 15,7 mm L = mm Ø = valve hole = 9,7 mm A = 27 mm B = 79 mm α = 80 Ø = valve hole = 20,5 mm Valve reference Photo Characteristics TR618A (ETRTO = V5-01-1) Air / water valves L L = 47,5 mm Ø = valve hole = 15,7 mm Type of rim Dimensions F H P mm mm mm Rim well standard 5 Rim well 5 tapered bead seat Rim well 5 tapered bead seat SDC rim W rim 2. C 63,5 16,5 3.00 D 76 3. D 89 18 4.00 E 101,5 4. E 114,5 20 18 5.00 E 127 23,5 5.375 I 136,5 16 23 5. F 1 6.00 F 152,5 22,5 23,5 6. F 165 9 228,5 27 11 279,5 12 5,5 13 3 31,5 14 355,5 16 6,4,4 10. 266,7 11.75 298,5 12. 311 13.00 3 14.00 355,5 15.00 381 16.00 6,5 AG 16.00 6,5 12,7 44 17.00 432 18.00 457 20.00 8 AG 20.00 8 AG 24.00 609,5 AG 28.00 711 11 279,5 12 5,5 13 3 36.0 TH 914,4 38,1 36.00 VA 914,4 43,1 W 6 152,4 W 7 177,8 22,2 23,8 W 8 203,2 W 8L 203,2 W 9 228,6 W 10 4,4 W 10L 4 22,2 W 11 279,4 27 W 12 4,8 W 13 3,2 W 14L 355,6,4 W 15L 381 W 16L 6,4 33 W 18L 457,2 O-rgs for SDC rims Reference Name CAI R 1681 0-rg OR 6.6-20 For 20 rim 553215 3 parts R 1438 0-rg OR 2 - For rim 553201 3 parts R 2052 0-rg OR 2-32 For 32 rim 5555 3 parts For 0-rgs, the name consists of: - OR for 0-rg - The fi rst digit describes the section of the rg jot; it is a whole number expressed eighths of an ch (e.g. 2 = 2/8 ). - The second digit describes the of the rim; it is a whole number expressed ches. Type of rim Dimensions F H P mm mm mm DW rim DW 10 4 DW 11 279,4 DW 12 4,8 27 DW 13 3,2 DW 14L 355,6,4 DW 15L 381 36,5 DW 16L 6,4 DW 17L 431,8 DW 18L 457,2 DW 20B 8 DW 21B 533,4 DW 23B 584,2,8 DW-B rims replace the DW-A rims they are identical and fully terchangeable TW rim DD rim MW rim DH27B rim DW 24B 609,5 DW B 635 28,6 DW 27B 686 DW 28B 711 DW B 762 TW 13 3 27 TW 14L 355,5 TW 15L 381,5 36,5 TW 16L 6,5 TW 18L 457 TW 20B 8 TW 21B 533,5 TW 23B 584,8 TW 24B 609,5 29 TW B 635 TW 27B 686 TW 28B 711 TW B 762 DD 15L 381 36,5 DD 16L 6,5 41 DD 18L 457,5 MW 20 8 MW 23 584 29,8 MW 635 DH 27B 686 29 54 If the DW rim is authorised then so is the correspondg TW rim (ETRTO) P F F = terior width H = height of fl ange (+/- 1 mm) P = width of rim H TAURUS agricultural technical documentation 2017 29

Use and implementation Instructions for use To determe the tyre pressure: Your tyre choice must comply with the applicable legislation and the equipment recommended by the vehicle manufacturer, by the manufacturer or by an official body (size, load and speed dices, structure (radial, diagonal, etc.). It is necessary to take to account the conditions which the tyre will be used so that the level of perfromance fully meets the user s requirements. If the vehicle s origal equipment is modified any way, you must ensure that this modification complies with the country s current legislation (see local regulations), conditions of use and manufacturer s recommendations. In some countries, modified vehicles require authorization from the relevant authorities. TAURUS tyres are designed for a specific use as described the catalogue. Any other use constitutes abnormal use. However, some circumstances, TAURUS may issue an exception and describe the accepted conditions and exceptional restrictions for use. TAURUS can not be held liable for the abnormal use of its tyres unless an express written waiver has been issued. Any second-hand or used tyre must prior to fittg, be checked carefully by a professional to ensure the safety of the user and complianced with the applicable regulations. In addition, some mechanical parts can wear out more quickly if you use tyres correctly or choose appropriately. Tyre pressure is always determed relation to the load per tyre, the tended speed and the work to be performed. The load to be taken to account should always be the highest one: - For tractors: - front axle: tractor with its mass / equipment on front road position and with no load on the rear axle - rear axle: tractor with equipment position for transport. NB: for a tractor equipped with a front loader, consider with max. load on the loader. - For harvesters or muck spreaders, it is fully loaded (full tank), with the header (or picker). NB: for harvesters, determe the axle load: - front axle with header bar or picker - rear axle without the header bar or picker Determe the pressure for use the field and use on-road and select the higher of the two For tensive on-road use or on slopes and cles, follow the structions given the pages Technical features of TAURUS tyres. When use: Distribute the loads evenly Adapt your drivg to the conditions (load, speed, slope, cle, condition of road or other terra). Matenance: Regularly check your tyre pressure Periodically check the condition of your tyres and have them checked by a qualified tyre professional Remder: - Damage caused by a puncture or an impact may be not visible itially and become apparent after some time - Tyres age even when not use Have any repairs carried out by a qualified and traed professional. TAURUS agricultural technical documentation 2017 TAURUS agricultural technical documentation 2017 31

Calculation of mechanical lead Front wheel lead % measurement For the transmission unit of a 4-wheel drive tractor to operate correctly, the correct mechanical lead must be used. This rule does not apply the case of 4 wheels of the same size. Most tractor manufacturers impose a mechanical lead of between 0% and 6%. This lead is specific, and may vary dependg on the manufacturer and the vehicle. An appropriate mechanical lead ratio - creases fuel consumption, - results more rapid front and rear tyre wear, - results more rapid wear on the transmission unit, - results poor tractor performance when dog some jobs (e.g. ploughg) and causes - abrupt front axle engagement, - a loss power and performance, - deterioration of the top soil. Note: The front axle must never be engaged on the road! Put marks on the tyres as picture above. Calculation of mechanical lead: (RC Front x R) - RC Rear x 100 = mechanical lead % RC Rear RC Rear: Rear tyre rollg circumference (specified the technical documentation) RC Front: Front tyre rollg circumference (specified the technical documentation) R: ter-axle ratio (This is fixed itially by the manufacturer) Step 1 : FRONT AXLE NOT ENGAGED (out of 4WD) Roll the tractor forward and count 10 turns of the rear tyre whilst countg the number N of front wheel revolutions Step 2 : FRONT AXLE ENGAGED ( 4WD) Roll the tractor forward and count 10 turns of the rear tyre whilst countg the number N1 of front wheel revolutions Calculation of measurement = (N1 - N) x 100 N 32 TAURUS agricultural technical documentation 2017 TAURUS agricultural technical documentation 2017 33

Key pots for fittg and removg tyres Fittg and removal operations can volve risks and must be carried out by a traed and qualified professional usg the appropriate tools and operatg methods. Never entrust these operations to an apprentice workg alone; if these operations are carried out by more than one person e.g. the case of fittg oversize tyres then make sure that at least one person is present throughout the operation. Use a compressed air supply equipped with a pressure limit switch. Not followg these structions and methods may result the tyre beg correctly fitted to the rim and cause it to burst with the associated risk of serious jury, or even a fatality. Removg a tyre from the rim 1. Never try to remove the beads of an flated tyre from a rim. 2. The ternal mechanism of the valve must be removed. - make sure that the tyre is fully deflated before removg it, - do not use tools that may damage the sidewalls or the cover beads, - detach the beads from the removal notches (if they exist), - to facilitate removal and protect the beads, particularly the case of a puncture, lubricate the rim seats and the tyre beads, - if the rim shows obvious signs of damage then the tyre must be deflated before dismantlg the assembly. Preparation for Fittg 1. Before fittg, ensure that the rim, tyre and ner tube are compatible. Check that: - the tyre is compatible with the vehicle or mache, - the of the rim seat corresponds to the seat of the tyre to be fitted (e.g. 18.4 R cover, rim: DW16L x ), - the tyre may be fitted to this rim (see characteristics the Manufacturer s documentation). Remember - There are rims with seat s of 15.3 ; never fit on these rims 15 tyres. The same thg applies for 16.1 and 15.5 rims; never fit 16 tyres on them. 2. Before fittg a tyre to a rim that has already been used: - the rim must be clean and perfect condition (showg no damage), - if not, then thoroughly clean the rim usg a metal brush Never fit a tyre to a rim that has cracks, significant deformation, rupturg, traces of weld repairs, etc. 3. If the tyre is worn, exame it carefully side and out for signs of damage. - if it shows signs of damage or deterioration that are deemed by a specialist to be irreparable, discard the tyre. 4. For assembly with an ner tube, always use a new and compatible ner tube of the right size for the tyre (markgs on the ner tube give the sizes of compatible tyres).! Do not fit the ner tube to a damaged or repaired rim, or to a rim not designed to take an ner tube. Fit a new tubeless valve whenever you replace a tubeless tyre. 5. Always use tools that have no sharp edges, are good condition and are suitable for the tyres and rims (bead unseatg tool, levers, maches, etc.). For wide and oversized tyres, we recommend parts to lubricate usg a bead breaker cylder or a bead unseatg tool with appropriate mechanical assistance to fit the second bead. 5 cm Before fittg, lubricate the rim seats and beads beads on the cover. Apply a th layer of lubricant to the sections shown seats on the sketch opposite; on the outer surface of the beads, the lubricant should be 5 cm higher than the edge of the rim. rim well Only use products tended for this purpose and that will not damage the tyre (do not use hydrocarbon based products, silicon, anti-freeze, etc.). Vertical fittg of the tyre on the wheel 1. Position the valve or the valve hole at the bottom. 2. If there is a diagram of the valve on the sidewall of the tyre, position the diagram as close as possible to the valve or the valve hole the rim. 3. Fit the tyre onto the rim so that the first tyre bead is positioned on the edge of the rim. (If applicable, observe the correct direction of rotation dicated on the tyre by an arrow). 4. By usg a suitable lever to apply pressure approximately every 10 cm: - push the first bead over the edge of the rim. Once the first bead is position: - position the slightly flated ner tube side the tyre (for fittg with an ner tube), - fix the valve by partially tighteng the nut. For the second bead: - lever it progressively over the rim flange - fish at the valve. 34 TAURUS agricultural technical documentation 2017 TAURUS agricultural technical documentation 2017 35

Key pots for fi ttg and removg tyres 5. Centerg the tyre, fittg the beads. - lower the jack slightly to optimise tyre centerg, - remove the valve s ner mechanism, - slowly and partially flate for optimal bead positiong, - check that the beads do not pch the ner tube, - flate to 2.5 bars max. to ensure that the beads are properly positioned. Inflatg and fittg the beads 1. Applyg the safety rules: - system to support the tyre assembly (safety cage), - safety goggles, - safety shoes, - ear defenders. In the absence of a safety cage or barrier, the operator should be as far away as possible from the tyre and the rim. Trajectories Once all the precedg operations have bee properly executed, - replace the valve s ner mechanism, - tighten the nut on the valve by hand, - fl ate to the required operatg pressure le with the load recommendations previously mentioned the Manufacturer s Documentation or to the storage pressure, - tighten the valve cap after every flation or pressure check operation as this is the part that ensures the valve remas clean and airtight. If fi ttg the tyre while flat on the ground (a method we do not recommend because it is impossible to see if the lower bead has been properly positioned, you must take the followg additional precautions: - Initially, do not go above a maximum pressure of 0.7 bar (for air tightness), - Lift the tyre/rim assembly and place it a safety cage or lean the upper part agast a wall - never a door or a lightweight partition, - Follow the structions for fittg the beads (Figures 1, 2 and 3 and page 36). Comment: Any radial tyres to be used at low pressures must be fitted onto high quality rims.! Careful: never stand the trajectories (see fi gures 1, 2, 3) order to prevent personal jury the case of an cident. To ensure the best safety conditions, use an fl ation gun connected to a valve via a 3-metre (m.) air extension cable equipped with a clip on the valve side and a calibrated pressure gauge perfect workg order (never block the handle). 2. Take particular care to: - check that the beads are positioned and centred relation to the edges of the rim, fl ate to 2.5 bars when positiong the beads. If the beads are not correctly positioned: - deflate, lubricate aga and fl ate to 2.5 bars, - repeat the operation as often as necessary until the beads are correctly positioned. To fit and position the beads to the rim seats INFLATE TO 2.5 Bars WITHOUT EXCEEDING THIS PRESSURE The diagram opposite dicates the maximum fl ation, which must not be exceeded when positiong the beads. This diagram is shown on the sidewall of every tyre. 2,5 bar MAX. Before tyres go to service - For transportg vehicles and maches (by road, rail or boat), we recommend deflatg the tyres to 1.8 bar (26 PSI) to avoid any possible damage beg caused by stowage systems. - When commissiong the mache, the pressures must always be determed and adjusted relation to the load borne by the tyres and the actual usage conditions. (See load/pressure scales this document). Special case Comfort Increased tyre life USER INSTRUCTIONS Correct pressure = Grip Soil protection Optimal mache effi ciency Ballastg tyres with liquids In certa cases, and order to crease the traction or lower the centre of gravity of a mache, for both tubeless and tube type tyres, the tyres may be ballasted with liquid. 36 TAURUS agricultural technical documentation 2017 TAURUS agricultural technical documentation 2017 37