Tors mo Tubular - PDF Free Download

250

Table of Contents for awnings and roller shutters Introduction and Selection tables Selection table: for awings...253 Somfy tubular motors: for industrial, commercial and residential applications... 254 for awnings... 258 for roller shutters... 259 rts Altus 40 RTS control options...260 Altus 40 RTS... 261 Altus RTS controls and sensors...262 Altus 50 RTS and Altus 60 RTS...263 Orea RTS controls and sensors... 264 Orea 50 RTS and Orea 60 RTS for cassette awnings... 265 Oximo RTS controls and sensors...266 Oximo 50 RTS for roller shutters...267 Oximo 50 S Auto RTS, short motor for roller shutters equipped with stoppers and rigid straps...268 LT CSI RTS for awnings and roller shutters...269 Oximo 40 WireFree RTS control options...270 Oximo 40 WireFree RTS for roller shutters...271 Altea RTS controls and sensors... 272 Altea 50 RTS for wind resistant screens... 273 Solus Radio Kit controls and sensors...274 Solus Radio Kit...275 standard tubular motors LS 40... 277 HiPro benefits...278 LT 50 and LT 60 HiPro...279 SLT HiPro benefits...280 SLT 50 and SLT 60 HiPro for cassette awnings...281 Orea WT control options... 282 Orea 50 WT and Orea 60 WT for cassette awnings... 283 Oximo WT control options...284 Oximo 50 WT for roller shutters...285 Ilmo WT control options...286 ILMO 50 WT only for roller shutters...287 ILMO S 50 WT, short motor for roller shutters equipped with stoppers and rigid straps...288 ILMO 40 WT, wired ø 40 motor only for roller shutters equipped with stoppers and rigid straps...289 LT 50/ 60 CSI/ RDO HiPro for roller shutters...290 Solus PA... 291 Tube adapters series 40 Series 40...292 Series 50 Series 50 - round tube... 293 Series 50 - tube with groove... 294 Series 50 - profiled tube...296 series 60 Series 60 - round tube...297 Series 60 - tube with groove...299 Series 60 - profiled tube...300 251

Motor brackets Series 40... 301 Series 50... 302 Series 50/ CSI and 60/ CSI... 305 Series 60...306 Supply cables Altus 50/ 60 RTS, Orea 50/ 60 RTS and Oximo 50 RTS...308 LT 50/ 60 and SLT 50/ 60...309 LT 50/ 60 and SLT 50/ 60...310 LT 50/ CSI and LT 60/ CSI... 311 Connection plugs...312 Other cables and accessories...313 Accessories Series 40... 314 Series 50 and 60... 315 Series 50/ CSI and 60/ CSI... 319 Technical data Altus 40 RTS...322 Altus 50 RTS...323 Altus 60 RTS...324 Orea 50 RTS...325 Orea 60 RTS... 326 Oximo 50 RTS... 327 Oximo 50 RTS S Auto RTS... 328 LT 50 CSI RTS... 329 Oximo 40 WireFree RTS... 330 Altea 50 RTS...331 Solus Radio Kit...332 LS 40...333 LT 50...334 LT 60...335 SLT 50... 336 SLT 60... 337 LT 50/ CSI... 338 LT 60/ CSI... 339 Orea 50 WT... 340 Orea 60 WT... 341 Oximo 50 WT...342 ILMO 50 WT...343 ILMO S 50 WT... 344 ILMO 40 WT... 345 Solus PA... 346 252

Selection table: for awnings RTS TUBULAR MOTORS PAGE FOLDING ARM DROP ARM SCREEN CANOPY WITHOUT mechanical stop WITH mechanical stop WITHOUT mechanical stop WITH mechanical stop WITHOUT mechanical stop ALTUS 40 RTS 261 WITH mechanical stop ALTUS 50 RTS 263 ALTUS 60 RTS 263 WITHOUT mechanical stop OREA 50 RTS 265 OREA 60 RTS 265 Solus Radio Kit 275 WIRED TUBULAR MOTORS PAGE FOLDING ARM DROP ARM SCREEN CANOPY WITHOUT mechanical stop WITH mechanical stop WITHOUT mechanical stop WITH mechanical stop WITHOUT mechanical stop WITH mechanical stop WITHOUT mechanical stop ls 40 277 lt 50 HiPro 279 lt 60 HiPro 279 SLT 50 HiPro 281 SLT 60 HiPro 281 OREA 50 WT 283 OREA 60 WT 283 SOLUS PA 291 Selection table: for roller shutters RTS TUBULAR MOTORS PAGE Fitted with rigid locking straps and stoppers. Roller shutters Fitted with standard t-springs. ALTUS 40 RTS 261 ALTUS 50 RTS 263 ALTUS 60 RTS 263 Solus Radio Kit 275 oximo rts 266 WITH mechanical stop WITH mechanical stop WIRED TUBULAR MOTORS PAGE Roller shutters Fitted with rigid locking straps and Fitted with standard t-springs. stoppers. LT 50 HiPro 279 LT 60 HiPro 279 LT 50/ csi HiPro 290 LT 60/ csi HiPro 290 LS 40 277 OXIMO 50 WT 285 Solus PA 291 ilmo 50 WT 287 253

Somfy tubular motors: for industrial, commercial and residential applications Installation of tubular motor in awnings. Installation of tubular motor in roller shutters. Somfy provides tubular motors for every application Somfy tubular motors can be easily integrated and concealed with screen and shutters systems. They offer high performance with reliability and reduced noise, this is qualified by international quality control standards throughout the world. The design of Somfy motors ensure easy manufacturing techniques of end-products. Frequency and security With Somfy RTS, commands are transmitted by radio (frequency 433.42 MHz) which uses rolling code technology with over 16 million combinations to provide a safe and secure operation. The range is 200 meters in free space and 20 meters through reinforced concrete walls. Highly flexible RTS motors are highly flexible in end-user control. For example you may have one remote control assigned to several motors or one remote control assigned to one motor. Radio assignment can be changed at any time without re-wiring. RTS tubular motors Wireless Radio technology has become very popular and is now an essential part of motor control. Somfy has developed a range of motors with integrated radio receivers based on (RTS) Radio Technology Somfy. (RTS) offers a high performance, convenient and reliable solution for rolling shutter automation which is easy to set up. RTS motors for roller shutters include; Altus RTS, Orea RTS and the Oximo RTS. Intermediate positions With Somfy s RTS motors it is possible to program favorite or preferred intermediate positions. For example consider setting a half shade for an awning or the daylight opening of roller shutters. 254

Automatic operation RTS tubular motors can also be operated automatically, for example with the Soliris Sensor RTS sun and wind system (for awnings) or the wireless timer Chronis RTS (for roller shutters). A sun and wind sensor operates the awning based on sun and wind measurement. You can program the times you want the roller shutters to open and close using the Chronis timer. A light function is also possible as an extra option. Altus RTS Standard RTS tubular motor for blinds, awnings and roller shutters. Altus RTS works with electronic end limits and does not carry out any automatic corrections like in the Orea or Oximo motors.. Orea RTS The Orea RTS tubular motor has been developed for cassette awnings. Orea RTS carries out automatic corrections as the awning is fully retracted back to a closed position. Fabric stretch is compensated by the automatic correction. This ensures that the awning always opens and closes perfectly, even if the fabric has stretched slightly over time. Oximo RTS The Oximo RTS tubular motor, was introduced for roller shutters in early 2004. The Oximo motor has intelligent obstacle detection in both the up and down directions. If assembled with the appropriate accessories, the motor will sense an obstacle in the down direction and stop if the shutter is frozen whilst trying to travel up. This motor also makes adjustments to the limit positions on a monthly basis if required. 255

Standard tubular motors Somfy s standard tubular motors are available in a range of sizes suitable for every type of application. The LS40 series tubular motor has a 40 mm diameter and is specifically suitable for rollers and venetian blind applications. The standard 50 and 60 series HiPro tubular motors are suitable for larger awnings and roller shutters. All HiPro tubular motors incorporate several design features which simplify installation. Features such as pushbutton limit switches to set limit positions quickly and easily. Motor diameter Capacitor Series 50 and 60 tubular motors are available in 50 and 60mm diameter which can be incorporated into standard tubes between 50-130mm. Surface mounted rotary switch. Surface mounted push button switch. Quick setting of end position Maintenance free. Accurate limit switch unit. 256

Benefits The right tubular motor for every application. Quick and simple assembly. Simple electrical connection. Quick adjustment of end settings. High operating comfort. Tried and tested technology. the output shaft with reliable quality. A three stage planetary gear system provides the necessary torque to power the application, while an electromagnetic disc brake stops the motor. Finally the limit switch unit can be set using push buttons on the LT HiPro model. In RTS motors the limits are adjusted remotely using RTS controls. Tried and tested technology All Somfy tubular motors work according to the same principle. Frequent testing and a reliable, well-designed technology ensure long life. The heart of the system is made up of a maintenancefree asynchronous motor. It is robust, powerful and drives Asynchronous motor Maintenance-free, lubricated for the entire life from factory. Long running time with integrated thermal protection. High quality parts are used in the construction to provide a long motor life. Ilmo WT Tubular motor with a fully automatic setting procedure for the end limits. The roller shutter must be equipped with stoppers and rigid straps. Simple installation: no handling or configuration necessary Obstacle detection and frost safeguard. Motors can be connected in parallel. Gear box Three-part planetary gear box. Silent, powerful and mainenance-free. Brake Electromagnetic disc brake engages when power to the motor is removed. 257

for awnings Features RTS tubular motors: Altus 40 RTS with 5 metre white VVF 2-core cable, round head, fixed cable, double insulated, no buttons. Code LA, MA, SA on the side of motor head. Solus Radio Kit with 2.5 meter white VVF 3-core cable, brown Motor plug (NOT compatible with grey motor plug). star-shaped motor head, 2 recessed progressive limits yellow/white. Code L on the side of motor head. Altus 50 RTS and Altus 60 RTS with 3 metre VVF 3-core cable, grey motor plug, starshaped motor head, no buttons. Code MA or LA on the side of the motor head. Which RTS tubular motor to use in which type of end product. Orea 50 RTS and Orea 60 RTS with 3 metre VVF 3-core cable, grey motor plug, start-shaped motor head, no buttons. Code M0 or LO on the side of the motor head. Type of end product cassette awning Semi-cassette awning End product WITHOUT mechanical stop End product WITH mechanical stop Solus Radio Kit Altus 50 RTS Altus 60 RTS Orea 50 RTS Orea 60 RTS Altus 40 RTS Solus Radio Kit Altus 50 RTS Altus 60 RTS Screen Altus 40 RTS Solus Radio Kit Altus 50 RTS Canopy awning Solus Radio Kit Altus 50 RTS Altus 60 RTS Orea 50 RTS Orea 50 RTS Orea 50 RTS Orea 60 RTS Hard wired tubular motors: LS 40 with 2.5 metre white VVF 3-core cable, dual insulated, white recessed progressive limits, round motor head. Which wired tubular motor to use in which type of end product. Type of end product End product WITHOUT mechanical stop Folding arm awning LT 50 HiPro LT 60 HiPro LT 50 HiPro and LT 60 HiPro with 3 metres of white VVF 4-core cable, black motor plug, limit buttons yellow/ white, star-shaped motor head. Drop arm awning Screen* Canopy awning LT 50 HiPro LT 60 HiPro SLT 50 HiPro and SLT 60 HiPro with 2,5 metres of white VVF 4-core cable, black motor plug, limit buttons blue/ yellow (= left version) or white/ blue (= right version), star-shaped motor head. LS 40 LT 50 HiPro LT 50 HiPro LT 60 HiPro Orea 50 WT and Orea 60 WT with 3 metres of white VVF 4-core cable, black plug, no buttons, star-shaped motor head. End product WITH mechanical stop SLT 50 HiPro SLT 60 HiPro Orea 50 WT Orea 60 WT SLT 50 HiPro Orea 50 WT SLT 50 HiPro SLT 60 HiPro Orea 50 WT Orea 60 WT SLT 50 HiPro Orea 50 WT For further advice or information please contact your local Somfy sales manager or call us on 0113 391 3030 258

for roller shutters Features RTS tubular motors: Altus 40 RTS with 3 metre white VVF 2-core cable, round head, fixed cable, double insulated, no buttons. Code LA, MA, SA on the side of the motor head. Solus Radio Kit with 2.5 meter white VVF 3-core cable, brown Motor plug (NOT compatible with grey motor plug). star-shaped motor head, 2 recessed turning pins yellow/ white. Code L on the side of motor head. Altus 50 RTS and Altus 60 RTS with 3 metres of white VVF 3-core cable, grey motor plug, starshaped motor head, no buttons. Code MA or LA on the side of the motor head. Which RTS tubular motor to use in which type of end product. Oximo 50 RTS with 3 metres of white VVF 3-core cable, grey motor plug, star-formed motor head, no buttons. Code MX on the side of the motor head. Type of end product WITH standard t-springs WITH stoppers and rigid locking straps. roller shutter Altus 40 RTS Solus Radio Kit Altus 50 RTS Altus 60 RTS Oximo 50 RTS LT 50 CSI RTS Oximo 50 RTS Oximo S Auto 50 RTS Features wired tubular motors: LS 40 with 2.5 metre white VVF 3-core cable, dual insulated, white progressive limits, round motor head. Which wired tubular motor to use in which type of end product. Type of end product Solus 50 PA with 2.5 meter white VVF 4-core cable, black motor plug, 2 recessed progressive limits yellow/white starshaped motor head. roller shutter WITH standard t-springs LS 40 Solus 50 PA LT 50 HiPro LT 60 HiPro LT 50/ CSI HiPro LT 60/ CSI HiPro Oximo 50 WT LT 50 HiPro and LT 60 HiPro with 2.5 metres of white VVF 4-core cable, black motor plug, 2 limit buttons yellow/ white, starshaped motor head. LT 50/ CSI HiPro and LT 60/ CSI HiPro with 2,5 metres of white VVF 4-core cable with CSI motor plug, 2 buttons yellow/ white, special motor head for emergency operation. Oximo 50 WT with 3 metres of white VVF 4-core cable, black motor plug, no limit buttons, star-shaped motor head. WITH stoppers and rigid locking straps. Ilmo 40 WT Ilmo 50 WT Oximo 50 WT Ilmo S 50 WT For further advice or information please contact your local Somfy sales manager or call us on 0113 391 3030 259

Altus 40 RTS control options Sunis WireFree sensor RTS Sunis Indoor WireFree sensor RTS Altus 40 RTS Telis 4 Pure RTS Telis 4 Patio RTS Telis Soliris RTS remotes for control of automatic light function Wireless timers Altus 40 RTS : the wireless solution for screens with no mechanical stop Benefits of Altus 40 RTS n RTS motor for blinds and screens n Features Fixed top and bottom limit position. No automatic limit adjustment. Recommended RTS controls: - Wireless Sun and wind system Soliris Sensor RTS (awning). - Wireless timer Chronis Comfort RTS with/ without light sensor (roller shutters). - Autonomous sun sensor Sunis WireFree sensor RTS (awning & roller shutters). - Wireless sun sensor Sunis Indoor WireFree RTS. - Wireless sun and temperature sensor Thermosunis WireFree RTS. Complete series of tubular motors, series 40: 3 Nm to 13 Nm. n Benefits Quick and easy adjustment and operation with wireless RTS controls, e.g. Telis remote control. Feedback with programme actions (through movement of the end product). Flexible and multifunctional system: easily add, move and remove wireless RTS controls. Simplified wiring between products. Info You can find more information about the control options of Altus RTS tubular motors in the interior window coverings, awning and roller shutter sections. For more information on RTS control view recommendations in the miscellaneous section. >> RTS 260

Altus 40 RTS 230 V/ 50 Hz tubular motor, with built-in receiver. Reception range: 20 metres through 2 concrete walls. Easy to programme wirelessly using a remote control. Adjustable intermediate position. 1 Altus RTS tubular motor can be controlled wirelessly from a maximum 12 wireless controls and a maximum of 3 RTS sensors. Not applicable with relay boxes, standard switches and standard controls. Altus 40 fits in a tube with a minimum inner diameter of 37 mm. Capacity of the final adjustment 500 revolutions. Supplied as standard with a white 2-core (VVF) cable. length 3 m. Axial and radial cable outlet. Double insulated to class II - no earth wire required. n Altus 40 RTS: Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Altus 3/ 30 RTS 3 30 15 - ø 40 1 020 056 Altus 4/ 14 RTS 4 14 20 - ø 40 1 021 144 Altus 9/ 14 RTS 9 14 45 - ø 40 1 023 117 Altus 13/ 8 RTS 13 8 65 - ø 40 1 024 074 >> RTS 261

Altus RTS controls and sensors Sunis WireFree sensor RTS Sunis Indoor WireFree RTS Thermosunis WireFree RTS Eolis 3D WireFree sensor RTS Soliris Sensor RTS Telis Soliris RTS remotes for control of automatic light function Telis 1 Pure RTS Telis 4 Pure RTS Telis 1 Silver RTS Telis 4 Silver RTS Telis 1 Patio RTS Telis 4 Patio RTS Patio Telis 1 Lounge RTS Telis 4 Lounge RTS Centralis RTS switch Chronis timer Chronis timer with light sensor Tubular motor Altus 50/ 60 RTS Altus RTS: the wireless solution for awnings and roller shutters with no mechanical stop Benefits of Altus RTS n RTS motor for multiple applications n Features Fixed top and bottom limit position. No automatic limit adjustment. Recommended RTS controls: - Soliris Sensor RTS (awnings). - Wireless timer Chronis Comfort RTS with/ without light sensor (roller shutters). - Autonomous sun sensor Sunis WireFree sensor RTS (awnings & roller shutters). - Wireless wind safeguard Eolis 3D WireFree sensor RTS (awnings). - Wireless sun sensor Sunis Indoor WireFree RTS. - Wireless sun and temperature sensor Thermosunis WireFree RTS. Complete series of tubular motors, series 50 and 60: 6 Nm to 120 Nm. Quick installation through unique clip system. n Benefits Quick and easy, adjustment and operation with wireless RTS controls, e.g. Telis remote control. Feedback with programme actions (through movement of the end product). Flexible and multifunctional system: easily add, move and remove wireless RTS controls. Info You can find more information about the control options of Altus RTS tubular motors in the interior window coverings, awning and roller shutter sections. For more information on RTS control view recommendations in the miscellaneous section. >> RTS 262

Altus 50 RTS and Altus 60 RTS Tubular motor 230 V/ 50 Hz, with built-in receiver. Reception range: 20 metres through 2 concrete walls. Easy commissioning wirelessly using the remote control. Adjustable intermediate position is possible. 1 Altus RTS tubular motor can be controlled wirelessly from a maximum 12 wireless controls and 3 RTS sensors. Not applicable with relay boxes, standard switches and standard controls. Not suitable for continuous use and with the ABS systems. Limit switch capacity 250 revolutions (Altus 50 RTS) and 200 revolutions (Altus 60 RTS). Series Altus 50 fits in a tube with a minimum inner diameter of 47 mm, with the Altus 60 it is 60 mm. Supplied as standard with a white 3-core (VVF) cable. length 3 m. Axial and radial cable outlet. n Altus 50 RTS motors with standard rpm (12 or 17 rev/ min) Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Altus 6/ 17 RTS 6 17 24 - ø 50 1 032 444 Altus 10/ 17 RTS 10 17 40 - ø 50 1 037 397 Altus 15/ 17 RTS 15 17 60 - ø 50 1 039 375 Altus 20/ 17 RTS 20 17 80 - ø 50 1 041 386 Altus 25/ 17 RTS 25 17 100 - ø 50 1 043 168 Altus 30/ 17 RTS 30 17 120 - ø 50 1 045 340 Altus 35/ 17 RTS 35 17 140 - ø 50 1 047 223 Altus 40/ 17 RTS 40 17 160 - ø 50 1 049 443 n Altus 60 RTS motors with standard rpm (12 or 17 rev/ min) Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Altus 55/ 17 RTS 6 17 24 - ø 50 1 161 114 Altus 70/ 17 RTS 10 17 40 - ø 50 1 163 101 Altus 85/ 17 RTS 15 17 60 - ø 50 1 165 099 Altus 100/ 12 RTS 20 12 80 - ø 50 1 166 060 >> RTS 263

Orea RTS controls and sensors Sunis WireFree sensor RTS Eolis Sensor RTS Orea RTS tubular motor Soliris sensor RTS Eolis 3D WireFree sensor RTS Telis 1 Pure RTS Telis 4 Pure RTS Telis 1 Silver RTS Telis 4 Silver RTS Telis 1 Patio RTS Telis 4 Patio RTS Telis 1 Lounge RTS Telis 4 Lounge RTS Centralis switch Telis Soliris RTS remotes for control of automatic light function Orea RTS: radio motor for cassette awnings Orea RTS benefits n The RTS motor for cassette awnings n Features Automatic in-board limit position setting. Fabric stretch compensation: fabric stretch is automatically corrected ensuring that the cassette always closes perfectly. Recommended RTS controls: Radio sun and wind system Soliris Sensor RTS and Sunis WireFree sensor RTS and Eolis 3D WireFree sensor RTS Complete series of tubular motors, series 50 and 60: 6 Nm to 120 Nm. Quick installation through unique clip system. n Benefits End product always closes perfectly. Quick and easy adjustment and operation with RTS controls, e.g. Telis remote control. Feedback throughout the commissioning procedure (through movement of the end product). Flexible and multifunctional system: easily add, replace and remove RTS controls. Wiring is simplified. Info Find more Orea RTS control information in the awning section. >> RTS 264

Orea 50 RTS and Orea 60 RTS for cassette awnings 230 V/ 50 Hz tubular motor, with built-in receiver. Reception range: 20 metres through 2 concrete walls. Perfect closure of the awning (fabric stretch compensation). Easy programming procedure using a remote control. Adjustable intermediate position. Not applicable with relay boxes, standard switches and standard controls. Orea 50 fits in a tube with a minimum inner diameter of 47 mm, with the Orea 60 it is 60 mm. Supplied as standard with a white 3-core (VVF) cable. length 3 m. Axial and radial cable outlet. Not suitable for continuous use and in combination with ABS systems. 1 Orea RTS tubular motor can be controlled wirelessly from a maximum 12 RTS controls and a maximum of 3 RTS sensors. Limit switch capacity 250 revolutions (Orea 50 RTS) and 200 revolutions (Orea 60 RTS). n Orea 50 RTS motors with standard rpm (12 or 17 rev/ min) Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Orea 20/ 17 RTS 20 17 80 - ø 50 1 113 086 Orea 25/ 17 RTS 25 17 100 - ø 50 1 114 127 Orea 30/ 17 RTS 30 17 120 - ø 50 1 115 105 Orea 35/ 17 RTS 35 17 140 - ø 50 1 116 122 Orea 40/ 17 RTS 40 17 160 - ø 50 1 117 115 n Orea 60 RTS motors with standard rpm (12 or 17 rev/ min) Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Orea 55/ 17 RTS 55 17 175 - ø 63 1 181 065 Orea 70/ 17 RTS 70 17 222 - ø 63 1 182 003 Orea 85/ 17 RTS 85 17 270 - ø 63 1 183 055 Orea 100/ 12 RTS 100 12 317 - ø 63 1 184 056 >> RTS 265

Oximo RTS controls and sensors Sunis Indoor WireFree RTS Thermosunis WireFree RTS Oximo RTS Sunis WireFree sensor RTS Telis 1 Pure RTS Telis 4 Pure RTS Telis 1 Silver RTS Telis 4 Silver RTS Telis 1 Patio RTS Telis 4 Patio RTS Telis 1 Lounge RTS Telis 4 Lounge RTS Chronis RTS Timer Chronis RTS Timer Chronis RTS Timer with light sensor Oximo RTS: roller shutter motor with RTS-technology Oximo RTS benefits n The RTS motor for all types of roller shutters n Features Intelligent obstacle detection in both the up and down directions. Motor stops if the shutter is frozen up. Automatic maintenance cycle (monthly with automatic adjustment of limits - the roller shutter always opens and closes perfectly). Recommended wireless controls: - Wireless timer Chronis Comfort RTS with/ without light sensor. - Wireless sun sensor Sunis Indoor WireFree RTS. - Wireless sun and temperature sensor Thermosunis WireFree RTS. Complete series of tubular motors, series 50: 6 Nm to 40 Nm. Quick installation through unique clip system. Compatible with the Sunis WireFree sensor RTS. n Benefits Quick and easy adjustment and operation with wireless RTS controls, e.g. Telis remote control. Feedback with programme actions (through movement of the end product). Flexible and multifunctional system: easily add, move and remove wireless RTS controls. Wiring is simplified. Info You can find more information about the control options of Oximo RTS tubular motors in the awning section. For more information on RTS control view recommendations in the miscellaneous section. >> RTS 266

Oximo 50 RTS for roller shutters Tubular motor 230 V/ 50 Hz, with built-in receiver. Reception range: 20 metres through 2 concrete walls. Easily programmed using a remote control. Option to combine with wireless timer (control also with light sensor). Intermediate position setting possible. 1 Oximo RTS tubular motor can be controlled wirelessly from a maximum of 12 RTS controls. Not applicable with relay boxes, standard switches and standard controls. Fits in a tube with a minimum inner diameter of 47 mm. Capacity of the limit switch unit is 200 revolutions. Supplied as standard with a white 3-core (VVF) cable. length 3 m. Axial and radial cable outlet. Not suitable for continuous use. n Oximo 50 RTS motors with standard RPM (rev/ min.) Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Oximo 6/ 17 RTS 6 17 24 - ø 50 1 032 392 Oximo 10/ 17 RTS 10 17 40 - ø 50 1 037 389 Oximo 20/ 17 RTS 20 17 80 - ø 50 1 041 380 Oximo 30/ 17 RTS 30 17 120 - ø 50 1 045 319 Oximo 40/ 17 RTS 40 17 160 - ø 50 1 049 434 n 'Lock-to-play accessories for use with Oximo RTS tubular motors Rigid strap 1 link (ZF) Rigid strap 2 links (ZF) Rigid strap 1 link (ZF) 1 780 757 Rings for rigid straps To be used for mechanical lock of roller shutter in DOWNWARDS direction. Applicable up to 20 Nm. For tube octo 40, 50 and 60. Rings for octo 40 1 780 760 Rings for octo 50 1 780 761 Rings for octo 60 1 780 762 For tube octo 40 1 780 758 For tube octo 50 and 60. 1 780 759 To be used for mechanical lock of roller shutter in DOWNWARDS direction. Applicable up to 20 Nm. >> RTS 267

Oximo 50 S Auto RTS, short motor for roller shutters equipped with stoppers and rigid straps Tubular motor 230 V/ 50 Hz with external printed circuit board. Reception range: 20 metres through 2 concrete walls. No setting required, only set the direction of rotation. Option to combine with wireless timer. Possibility to set intermediate position. 1 Oximo S Auto RTS tubular motor can be controlled by a maximum of 12 RTS controls. Not applicable with relay boxes, standard switches and standard controls. Fits in a tube with a minimum inner diameter of 47 mm. Limit switch capacity 200 revolutions. Supplied as standard with Oximo RTS module, with a white 3-core (VVF) cable, 3 m long and a cable with motor plug. Not suitable for continuous use. Can motorise a roller shutter from 425 mm. Motor stops with obstacles or if the shutter is frozen up. Recommended wireless controls: - Chronis RTS timer. - Sunis Indoor WireFree RTS. - Thermosunis WireFree RTS. Quick installation through unique clip system. Compatible with the Sunis WireFree sensor RTS. n Oximo 50 S Auto RTS motors with standard RPM (rev/ min.) Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Oximo S Auto 6/ 17 RTS 6 17 24 - ø 50 1 130 128 n 'Lock-to-play accessories for use with Oximo RTS tubular motors Rigid strap 1 link (ZF) Rigid strap 2 links (ZF) Rigid strap 1 link (ZF) 1 780 757 Rings for rigid straps To be used for mechanical lock of roller shutter in DOWNWARDS direction. Applicable up to 20 Nm. For tube octo 40, 50 and 60. Rings for octo 40 1 780 760 Rings for octo 50 1 780 761 Rings for octo 60 1 780 762 For tube octo 40 1 780 758 For tube octo 50 and 60. 1 780 759 To be used for mechanical lock of roller shutter in DOWNWARDS direction. Applicable up to 20 Nm. Short plug end for tube ZF 54 9 014 470 Short plug end 9 014 469 for tube octo 60 Compact drive wheel 9 014 468 for short plug end >> RTS 268

LT CSI RTS for awnings and roller shutters Tubular motor with built-in radio receiver. Reception range: 20 metres through 2 concrete walls. 2 Adjustable intermediate positions are possible. 1 LT CSI RTS tubular motor can be controlled wirelessly from a maximum 12 RTS controls and 3 RTS sensors. Series LT CSI RTS fits in a tube with a minimum inner diameter of 47 mm. Limit switch capacity 34 rps (± 8 ). Supplied as standard with a white 3-core (VVF) cable. 2.5 m long. Radial cable outlet. Not suitable for continuous use. n LT CSI RTS motors Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) LT 50 10/ 17 CSI RTS 10 17 40 - ø 50 1 037 030 LT 50 20/ 17 CSI RTS 20 17 80 - ø 50 1 041 023 LT 50 30/ 17 CSI RTS 30 17 120 - ø 50 1 045 023 LT 50 40/ 17 CSI RTS 40 17 160 - ø 50 1 049 037 LT 50 50/ 12 CSI RTS 50 12 200 - ø 50 1 051 017 >> RTS 269

Oximo 40 WireFree RTS control options Oximo 40 WireFree RTS tubular motor Telis 1 Pure RTS Telis 4 Pure RTS Telis 1 Silver RTS Telis 4 Silver RTS Telis 1 Patio RTS Telis 4 Patio RTS Telis 1 Lounge RTS Telis 4 Lounge RTS Chronis RTS timer Chronis RTS timer Chronis RTS timer with light sensor Oximo RTS: roller shutter motor with RTS-technology Benefits of Oximo 40 WireFree RTS RTS n Autonomous RTS motor for roller shutters n Features Intelligent obstacle detection in both the up and down directions. Motor stops if the shutter is frozen up. Automatic maintenance cycle (monthly adjustment of limits - the roller shutter always opens and closes perfectly). Recommended wireless controls: - Wireless timer Chronis Comfort RTS with/ without light sensor. - Wireless sun sensor Sunis Indoor WireFree RTS. - Wireless sun and temperature sensor Thermosunis WireFree RTS. Complete series of tubular motors, series 40: 3 Nm to 10 Nm. Quick installation through unique clip system. Compatible with the Sunis WireFree sensor RTS. n Benefits Solar powered system - no wiring required. Quick and easy adjustment and operation with wireless RTS controls, e.g. Telis remote control. Feedback with programme actions (through movement of the end product). Flexible and multifunctional system: easily add, move and remove wireless RTS controls. Info You can find more information about the control options of Oximo RTS tubular motors in the roller shutter section. For more information on RTS control view recommendations in the miscellaneous section. >> RTS 270

Oximo 40 WireFree RTS, for roller shutters The system comprises: - A 12 V cc tubular motor, with built-in high frequency receiver - A 12 V solar panel - NiMh Battery Pack 12 V - 2-2 Ah Option to connect a second solar panel depending on the orientation and the installation characteristics. Reception range: 20 metres through 2 concrete walls. Simple commissioning procedure using a remote control. Option to combine with wireless timer. 1 Oximo RTS tubular motor can be controlled with a maximum of 12 RTS controls. Not applicable with relay boxes, standard switches and standard controls. Fits in an octo 40 tube with seam on the outside. Limit switch capacity 200 revolutions. Supplied as standard with a white 3-core (VVF) cable. length 5 m. Axial and radial cable outlet. Not suitable for continuous use. n Oximo 40 WireFree RTS system Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Oximo 40 WireFree 3/ 23 RTS 3 23 8 - ø 40 1 025 001 Oximo 40 WireFree 6/ 18 RTS 6 18 16 - ø 40 1 025 002 Oximo 40 WireFree 10/ 12 RTS 10 12 27 - ø 40 1 025 003 n Lock-to-play accessories for optimal use of Oximo RTS tubular motors Rigid strap 1 link (ZF) Rigid strap 2 links (ZF) Rigid strap 1 link (ZF) 1 780 757 Rings for rigid straps To be used for mechanical lock of roller shutter in DOWNWARDS direction. Applicable up to 20 Nm. For tube octo 40, 50 and 60. Rings for octo 40 1 780 760 Rings for octo 50 1 780 761 Rings for octo 60 1 780 762 For tube octo 40 1 780 758 For tube octo 50 and 60. 1 780 759 To be used for mechanical lock of roller shutter in DOWNWARDS direction. Applicable up to 20 Nm. Accessories Battery Pack 9 015 004 Solar panel 9 015 005 Emergency battery 9 015 006 Cable to connect - 2 solar panels >> RTS 271

Altea RTS controls and sensors Sunis WireFree sensor RTS Eolis Sensor RTS Altea 50 RTS tubular motor Soliris Sensor RTS Telis Soliris RTS remotes for control of automatic light function Telis 1 Pure RTS Telis 4 Pure RTS Telis 1 Silver RTS Telis 4 Silver RTS Telis 1 Patio RTS Telis 4 Patio RTS Telis 1 Lounge RTS Telis 4 Lounge RTS Centralis RTS Centralis RTS Centralis RTS with light sensor Altea RTS: motor for wind-resistant screens with a mechanical lock in the bottom position Benefits of Altea RTS n Features Fabric is always taut. Automatic maintenance cycle which ensures the fabric is always perfectly taut. n Benefits Quick and easy adjustment and operation with wireless RTS controls, e.g. Telis remote control. Feedback during the commissioning procedure (through movement of the end product). Flexible and multifunctional system: easily add, move and remove wireless RTS controls. Simplified wiring. Info More information on the Altea RTS can be found in the awning section. >> RTS 272

Altea 50 RTS for wind resistant screens Tubular motor 230 V/ 50 Hz, with built-in receiver. Reception range: 20 metres through 2 concrete walls. Easy programmed wirelessly using a RTS control. Adjustable intermediate position. 1 Altea RTS tubular motor can be controlled wirelessly from a maximum 12 RTS controls and a of 3 RTS sensors. Altea 50 RTS fits in a tube with a minimum inner diameter of 47 mm. Limit switch capacity 250 revolutions. Supplied as standard with a white 3-core (VVF) cable. length 5 m. Axial and radial cable outlet. n Altea 50 RTS motors Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Altea 6/ 17 RTS 6 17 24 - ø 50 1 110 137 Altea 6/ 32 RTS 6 32 24 - ø 50 1 110 139 >> RTS 273

Solus Radio Kit control options Altea 50 RTS Telis Soliris RTS remotes for control of automatic light function Telis 1 Pure RTS Telis 4 Pure RTS Telis 1 Silver RTS Telis 4 Silver RTS Telis 1 Patio RTS Telis 4 Patio RTS Telis 1 Lounge RTS Telis 4 Lounge RTS Centralis RTS Centralis RTS Centralis RTS with sun sensor Solus Radio Kit: motor and control kit Benefits of the Solus Radio Kit RTS motor for multiple applications n Features Progressive limit adjustment. Recommended RTS controls: Chronis Comfort RTS timer with/without light sensor (roller shutters). series, series 50: 10 Nm to 40 Nm. Quick assembly through unique clip system. Supplied with Solus RTS wall switch. n Benefits Feedback when programming the motor (the end product moves). Flexible and multifunctional system: easily add, move and remove wireless RTS controls Simplified wiring. >> RTS 274

Solus Radio Kit RTS motor with built-in radio receiver. Tubular motor 230 V/50 Hz, with built-in high frequency receiver. Reception range: 20 metres through 2 concrete walls. 2 Adjustable intermediate positions are possible. 1 Solus Radio Kit tubular motor can be controlled wirelessly from a maximum of 12 wireless controls. Solus motor fits in a tube with a minimum inner diameter of 47 mm. Limit switch capacity: 29 rpm (± 8 ). Supplied as standard with a white 3-core (VVF) cable. 2.5 m long. Axial and radial cable outlet. Campatible with series 50 Hipro tubular motor accessories. Not suitable for continuous use. n Solus Radio Kit motors Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Solus RK 10/ 12 10 12 40 - ø 50 1 037 027 Solus RK 20/ 12 20 12 80 - ø 50 1 041 066 Solus RK 30/ 12 30 12 120 - ø 50 1 045 146 Solus RK 40/ 12 40 12 160 - ø 50 1 049 076 >> RTS 275

276

LS 40 Tubular motor 230 V/50Hz. Fits in a tube with a minimum inner diameter of 37 mm. Double insulated according to class II (no earth wire required). Limit switch capacity: 40 revolutions. Supplied as standard with a white 3-core (VVF) cable. 2.5 m long. Round motor head. Axial and radial cable outlet. Not suitable for continuous use. n LS 40 motors with 2.5 metre white VVF cable Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Mercure 3/ 30 3 30 15 - ø 40 1 020 010 Aries S* 4/ 14 4 14 20 - ø 40 1 021 041 Aries 4/ 14 4 14 20 - ø 40 1 021 021 Mars 9/ 14 9 14 45 - ø 40 1 023 010 Vulcan 13/ 8 13 8 65 - ø 40 1 024 010 *The Aries S is c. 4.5 cm shorter than the standard Aries. Info You can find more information about the control options of LS 40 tubular motors in the interior window coverings, awning and roller shutter sections. >> Standard 277

HiPro benefits Simplified installation Fewer accessories and more efficiency, the Somfy HiPro motor offers many benefits: n Simple installation: A quick clip -system for fixing the drive wheel on the output shaft and a star-shaped motor head that allows 6 different installation options with a 'clip'-system for fixing the motor in its bracket. n Simple wiring: With 2 possible supply cable outlets. n Simple setting of the limits: The 2 rapid set limit buttons offer a quick and precise setting procedure. n More comfort: Universal accessories for the HiPro motor and a low noise level. Benefits of the HiPro motor Simple setting using the limit buttons. Great accuracy of the limit setting. Six installation options for the motor head. Universal accessories for the HiPro motor range. Integrated plug with axial and radial cable outlet. Simplified installation. Low noise level. CEBEC-mark of approval Info You can find more information about the control options of LT, SLT and WT motors in the awning and roller shutter sections. >> Standard 278

LT 50 and LT 60 HiPro Tubular motor 230 V/ 50Hz. The LT 50 fits in a tube with a minimum inner diameter of 47 mm. The LT 60 is 60 mm. Capacity of the LT 50: 46 revolutions. LT 60: 35 revolutions. Supplied as standard with a white 4-core (VVF) cable. 2.5 m long. Compatible with all Somfy controls. n LT 50 HiPro motors with standard rpm (12 or 17 rev/ min) Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Ariane 6/ 17 6 17 24 - ø 50 1 032 052 Jet 10/ 12 10 17 40 - ø 50 1 037 054 Atlas 15/ 12 15 17 60 - ø 50 1 039 044 Meteor 20/ 12 20 17 80 - ø 50 1 040 145 Gemini 25/ 17 25 17 100 - ø 50 1 043 043 Helios 30/ 12 30 17 120 - ø 50 1 045 037 Apollo 35/ 17 35 17 140 - ø 50 1 047 032 Mariner 40/ 12 40 17 160 - ø 50 1 049 054 Vectran 50/ 12 50 12 200 - ø 50 1 051 031 n LT 60 HiPro motors with standard rpm (12 or 17 rev/ min) Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Orion S 55/ 17 55 17 174 - ø 63 1 161 011 Vega 60/ 12 60 12 190 - ø 63 1 162 023 Sirius 80/ 12 80 12 254 - ø 63 1 164 021 Titan 100/ 12 100 12 317 - ø 63 1 166 025 Taurus 120/ 12 120 12 381 - ø 63 1 167 017 >> Standard 279

SLT HiPro benefits The motor that closes the awning perfectly The Somfy SLT HiPro motor offers the following advantages: n The SLT operation: The SLT HiPro motor is specifically designed for cassette awnings. It incorporates a special limit function that allows the limit to be set while the cassette is still open. When the awning closes, the motor identifies the limit position and operates at a reduced torque level. The built in timer cuts the power to the motor completely after a few seconds.the SLT function also compensates for any fabric stretch and ensure the awning fabric is always tensioned. n Simple setting of the end setting: The in-board limit setting should be set 10 to 15 cm before the awning closes. To make a visual distinction between the standard LT HiPro and the SLT HiPro tubular motor the limit button for the in-board SLT position is finished in BLUE. For the correct operation of the motor and to prevent mechanical overload, it is necessary: 1) for the front profile to produce a sound mechanical stop (preferably over the entire width of the awning). 2) for the correct motor to be selected. SLT 50 LEFT SLT 50 RIGHT Benefits of the SLT HiPro motor The awning always closes perfectly, and the fabric remains clean and tidy for a longer time. Fabric stretch compensation. Easy access to the limit button for in-board limit setting. No repeated readjustments required. The motor powers down a few seconds after closing the awning. Universal accessories for the HiPro concept. CEBEC-approval Selection table SLT 50 and SLT 60 HiPro motors for LEFT or RIGHT mounting MOTOR IS INSTALLED ON THE LEFT fabric ROLLS UP ALONG THE TOP MOTOR IS INSTALLED ON THE RIGHT Blue button Yellow button White button Blue button LEFT VERSION L White button Blue button fabric ROLLS UP ALONG THE BOTTOM RIGHT VERSION R Blue button Yellow button RIGHT VERSION R LEFT VERSION L >> Standard 280

SLT 50 and SLT 60 HiPro for cassette awnings Tubular motor 230 V/ 50Hz. The awning closes perfectly. Series SLT 50 fits in a tube with a minimum inner diameter of 47 mm. With the SLT 60 it is 60 mm. Limit switch capacity of the SLT 50: 46 revolutions. With the SLT 60: 35 revolutions. Supplied as standard with a white 4-core (VVF) cable. 3 m long. Compatible with all Somfy controls. Axial and radial cable outlet. Not suitable for continuous use. n SLT 50 HiPro motors in LEFT or RIGHT versions Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Left version Right version SLT 15/ 17 15 17 60 - ø 50 1 112 019 1 112 008 SLT 25/ 17 25 17 100 - ø 50 1 114 020 1 114 008 SLT 35/ 17 35 17 140 - ø 50 1 116 021 1 116 008 SLT 40/ 17 40 17 160 - ø 50 1 117 021 1 117 008 n SLT 60 HiPro motors in left or right versions Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Left version Right version SLT 55/ 17 55 17 175 - ø 63 1 181 024 1 181 013 SLT 70/ 17 70 17 222 - ø 63 1 182 015 1 182 007 SLT 85/ 17 85 17 270 - ø 63 1 183 011 1 183 005 SLT 100/ 12 100 12 317 - ø 63 1 184 055 1 184 054 >> Standard 281

Orea WT control options Orea WT: the wired solution for cassette awnings Benefits of the Orea WT n The wired motor for cassette awnings n Features Automatic in-board limit detection. Fabric stretch compensation: fabric stretch is automatically corrected which ensures that the cassette always closes perfectly. Compatible with all Somfy controls. Complete series of tubular motors: 6 Nm to 120 Nm. Quick installation through unique clip system. n Benefits The awning always closes perfectly. Only one version required for left and right hand installations. Feedback with programme actions (through movement of the awning). Parallel connection of motors is possible. Setting via the WT-setting cable or using the WT Setting Tool. Access to the motor head is not necessary for setting the end limits. WT Setting Tool WT Setting Tool 1 824 009 Simple adjustment for Oximo 50 WT, Orea 50 WT and Orea 60 WT motors. Reliable setting via a menu procedure displayed on a LCD screen. Easy to operate and use. Protects LT motors from simultaneous power in both directions when checking the type of motor. Simple connections: - Quick connector >> Standard 282

Orea 50 WT and Orea 60 WT for cassette awnings Tubular motor 230 V/ 50Hz. Perfect closure of the awning with fabric (with fabric stretch compensation) Limit setting possible without access to the motor head. Parallel connection of motors is possible. Compatible with all Somfy controls. Series Orea 50 fits in a tube with a minimum inner diameter of 47 mm, the Orea 60 is 60 mm. Limit switch capacity: 250 rpm (Orea 50 WT) and 200 rpm (Orea 60 WT). Supplied as standard with a white 4-core (VVF) cable. length 3 m. Axial and radial cable outlet. Not suitable for continuous use or with ABS systems. n Orea 50 WT motors with standard rpm (12 or 17 rev/ min) Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Orea 6/ 17 WT 6 17 24 - ø 50 1 110 156 Orea 10/ 17 WT 10 17 40- ø 50 1 111 108 Orea 15/ 17 WT 15 17 60 - ø 50 1 112 196 Orea 20/ 17 WT 20 17 80- ø 50 1 113 164 Orea 25/ 17 WT 25 17 100 - ø 50 1 114 173 Orea 30/ 17 WT 30 17 120- ø 50 1 115 157 Orea 35/ 17 WT 35 17 140- ø 50 1 116 171 Orea 40/ 17 WT 40 17 160- ø 50 1 117 161 Orea 50/ 12 WT 50 12 200- ø 50 1 118 122 n Orea 60 WT motors with standard rpm (12 or 17 rev/ min) Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Orea 55/ 17 WT 55 17 175 - ø 63 1 181 186 Orea 70/ 17 WT 70 17 222 - ø 63 1 182 159 Orea 85/ 17 WT 85 17 270 - ø 63 1 183 148 Orea 100/ 12 WT 100 12 317 - ø 63 1 184 082 Orea 120/ 12 WT 120 12 381 - ø 63 1 184 085 >> Standard 283

Oximo WT control options Oximo WT: wired roller shutter motor Benefits of the Oximo WT n Wired motor for all types of roller shutters n Features Intelligent obstacle detection in both the up and down directions. Motor stops if the shutter is frozen up. Automatic maintenance cycle - the roller shutter always opens and closes perfectly. Compatible with all Somfy controls. Torque values from 6 Nm to 40 Nm. Quick installation through unique clip system. Parallel connection of motors is possible. n Benefits Setting via the WT-setting cable or WT Setting Tool. Feedback with programme actions (through movement of the end product). No access to the motor head to set the limit positions. WT Setting Tool WT Setting Tool 1 824 009 Simple adjustment for Oximo 50 WT, Orea 50 WT and Orea 60 WT motors. Reliable setting via a menu procedure displayed on a LCD screen. Easy to operate and use. Protects LT motors from simultaneous power in both directions when checking the type of motor. Simple connections: - Quick connector >> Standard 284

Oximo 50 WT for roller shutters Tubular motor 230 V/ 50Hz. Limit setting possible without access to the motor head. Option to combine with timer. Compatible with all Somfy controls. Fits in a tube with a minimum inner diameter of 47 mm. Limit switch capacity 200 revolutions. Supplied as standard with a white 4-core (VVF) cable. length 3 m. Axial and radial cable outlet. Not suitable for continuous use. n Oximo 50 WT motors with standard rpm (17 rev/ min) Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Oximo 6/ 17 WT 6 17 24 - ø 50 1 032 578 Oximo 10/ 17 WT 10 17 40 - ø 50 1 037 582 Oximo 15/ 17 WT 15 17 60 - ø 50 1 039 493 Oximo 20/ 17 WT 20 17 80 - ø 50 1 041 529 Oximo 30/ 17 WT 30 17 120 - ø 50 1 045 450 Oximo 40/ 17 WT 40 17 160 - ø 50 1 049 542 n 'Lock-to-play accessories for use with Oximo WT tubular motors Rigid strap 1 link (ZF) Rigid strap 2 links (ZF) Rigid strap 1 link (ZF) 1 780 757 Rings for rigid straps To be used for mechanical lock of roller shutter in DOWNWARDS direction. Applicable up to 20 Nm. For tube octo 40, 50 and 60. Rings for octo 40 1 780 760 Rings for octo 50 1 780 761 Rings for octo 60 1 780 762 For tube octo 40 1 780 758 For tube octo 50 and 60. 1 780 759 To be used for mechanical lock of roller shutter in DOWNWARDS direction. Applicable up to 20 Nm. >> Standard 285

Ilmo WT control options Ilmo WT wired roller shutter motor Benefits of the Ilmo WT n Roller shutter motor with automatic setting n Wired motor for roller shutters equipped with rigid straps and stoppers n Features No limit adjustment is necessary. Intelligent obstacle detection in both the up and down directions. Motor stops if the shutter is frozen up. Automatic maintenance cycle - roller shutter always opens and closes perfectly. Compatible with all Somfy controls. Available in the following torque values: 6 Nm to 35 Nm. Quick installation through unique clip system. Parallel connection of motors is possible. n Benefits No limit setting necessary. No access to the motor head is required. >> Standard 286

ILMO 50 WT for roller shutters Tubular motor 230 V/ 50Hz. No limit setting necessary. Option to combine with a timer. Compatible with all Somfy controls. Fits in a tube with a minimum inner diameter of 47 mm. limit switch capacity: 200 revolutions. Supplied as standard with a white 4-core (VVF) cable. length 3 m. Axial and radial cable outlet. Not suitable for continuous use. n ILMO 50 WT motors with standard rpm (17 rev/ min) Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Ilmo 6/ 17 WT 6 17 24 - ø 50 1 130 125 Ilmo 10/ 17 WT 10 17 40 - ø 50 1 131 110 Ilmo 15/ 17 WT 15 17 60 - ø 50 1 132 095 Ilmo 20/ 17 WT 20 17 80 - ø 50 1 132 101 Ilmo 30/ 17 WT 30 17 120 - ø 50 1 133 001 Ilmo 35/ 17 WT 35 17 140 - ø 50 1 133 004 n Lock-to-play accessories for optimal use of Ilmo 50 WT tubular motors Rigid strap 1 link (ZF) Rigid strap 2 links (ZF) Rigid strap 1 link (ZF) 1 780 757 Rings for rigid straps To be used for mechanical lock of roller shutter in DOWNWARDS direction. Applicable up to 20 Nm. For tube octo 40, 50 and 60. Rings for octo 40 1 780 760 Rings for octo 50 1 780 761 Rings for octo 60 1 780 762 For tube octo 40 1 780 758 For tube octo 50 and 60. 1 780 759 To be used for mechanical lock of roller shutter in DOWNWARDS direction. Applicable up to 20 Nm. >> Standard 287

ILMO S 50 WT, short motor for roller shutters equipped with stoppers and rigid straps Tubular motor 230 V/ 50 Hz with external printed circuit board for roller shutters from 425 mm wide. No limit setting necessary. Option to combine with timer. Compatible with all Somfy controls. Fits in a tube with a minimum inner diameter of 47 mm. Supplied as standard with Ilmo WT module, with a white 4-core (VVF) cable (3 m long) and a cable with motor plug. Axial and radial cable outlet. Not suitable for continuous use. Intelligent obstacle detection in both the up and down directions. Motor stops with obstacles or if the shutter is frozen up. Compatible with all Somfy controls. Quick installation through unique clip system. Parallel connection of motors is possible. n ILMO 50 S WT motors with standard rpm (17 rev/ min) Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Ilmo 6/ 17 S WT 6 17 24 - ø 50 1 130 127 n Lock-to-play accessories for optimal use of Ilmo 50 WT tubular motors Rigid strap 1 link (ZF) Rigid strap 2 links (ZF) Rigid strap 1 link (ZF) 1 780 757 Rings for rigid straps To be used for mechanical lock of roller shutter in DOWNWARDS direction. Applicable up to 20 Nm. For tube octo 40, 50 and 60. Rings for octo 40 1 780 760 Rings for octo 50 1 780 761 Rings for octo 60 1 780 762 For tube octo 40 1 780 758 For tube octo 50 and 60. 1 780 759 To be used for mechanical lock of roller shutter in DOWNWARDS direction. Applicable up to 20 Nm. Plug end for tube ZF 54 9 014 470 Plug end for tube octo 60 9 014 469 Drive wheel for plug end 9 014 468 >> Standard 288

ILMO 40 WT, wired ø 40 motor for roller shutters equipped with stoppers and rigid straps Tubular motor 230 V/ 50Hz. No limit setting necessary. Intelligent obstacle detection in both the up and down directions. Option to combine with timer. Compatible with all Somfy controls. Fits in an octo 40 tube with seam on the outside. Limit switch capacity: 200 revolutions. Supplied as standard with a white 4-core (VVF) cable. length 2.5 m. Axial and radial cable outlet. Not suitable for continuous use. n ILMO 40 WT motors with standard rpm (17 rev/ min) Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Ilmo 40 4/ 14 WT 4 14 20 - ø 40 1 021 205 Ilmo 40 9/ 14 WT 9 14 45 - ø 40 1 023 164 Ilmo 40 13/ 8 WT 13 8 65 - ø 40 1 024 110 n Lock-to-play accessories for optimal use of Ilmo 40 WT tubular motors Rigid strap 1 link (ZF) Rigid strap 2 links (ZF) Rigid strap 1 link (ZF) 1 780 757 Rings for rigid straps To be used for mechanical lock of roller shutter in DOWNWARDS direction. Applicable up to 20 Nm. For tube octo 40, 50 and 60. Rings for octo 40 1 780 760 Rings for octo 50 1 780 761 Rings for octo 60 1 780 762 For tube octo 40 1 780 758 For tube octo 50 and 60. 1 780 759 To be used for mechanical lock of roller shutter in DOWNWARDS direction. Applicable up to 20 Nm. >> Standard 289

LT 50/ 60 CSI/ RDO HiPro for roller shutters Tubular motor 230 V/ 50Hz. Integral manual over-ride system for use in the event of a power cut. Manual over-ride ratio 27:1 with LT 50/ CSI and 55:1 with LT 60/ CSI. Motor can be installed directly on the shutter end plate. Series LT 50/ CSI fits in a tube with a minimum inner diameter of 47 mm. With the LT 60/ CSI that is 60 mm. Limit switch capacity for LT50/ LT60: 34 revolutions. Supplied as standard with a white 4-core (VVF) cable. 2.5 m long. Compatible with all Somfy controls. Not suitable for continuous use. n LT 50 CSI RDO HiPro motors with integral manual over-ride Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Jet/ RDO 10/ 17 10 17 40 - ø 50 1 037 008 Meteor/ RDO 20/ 17 20 17 80 - ø 50 1 043 353 Gemini/ RDO 25/ 17 25 17 100 - ø 50 1 043 334 Helios/ RDO 30/ 17 30 17 120 - ø 50 1 045 550 Mariner/ RDO 40/ 17 40 17 160 - ø 50 1 049 633 Vectran/ RDO 50/ 12 50 12 200 - ø 50 1 051 357 Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Vega/ RDO 60/ 12 60 12 190 - ø 63 1 162 215 Sirius/ CSI 80/ 12 80 12 254 - ø 63 1 164 003 Titan/ RDO 100/ 12 100 12 317 - ø 63 1 166 145 Taurus/ RDO 120/ 12 120 12 381 - ø 63 1 167 103 Orion S/ RDO 55/ 17 55 17 174 - ø 63 1 161 175 >> Standard 290

Solus PA Standard basic motor with all the benefits of Somfy quality. Tubular motor 230 V/ 50Hz. Progressive limit switch unit. For use with relay boxes, standard switches and standard controls. Series Solus PA fits in a tube with a minimum inner diameter of 47 mm. Limit switch capacity: 29 rps (± 8 ). Supplied as standard with a white 4-core (VVF) cable. 2.5 m long. Axial and radial cable outlet. Accessories to series 50 Hipro tubular motors. Not suitable for continuous use. n Solus PA motors Type of motor Torque (Nm) RPM (rev/ min.) Tensile strength with tube (kg - ø mm) Solus PA 10/ 12 10 12 40 - ø 50 1 037 157 Solus PA 20/ 12 20 12 80 - ø 50 1 041 063 Solus PA 30/ 12 30 12 120 - ø 50 1 045 124 Solus PA 40/ 12 40 12 160 - ø 50 1 049 060 >> Standard 291

Tube adapters series 40 Crown Drive ø 40x1,5 Crown and drive for ø 40 x 1.5 Deprat 40x0,6 40x0,8 Crown and drive for Deprat 40 x 0.6 (0.8) Crown 9 147 330 Drive 9 147 544 Crown 9 132 145 Drive 9 500 344 Crown and drive for Imbac 40 x 0.8 With weld seam on Imbac 40x0,8 Helioscreen 47x2 the outside Crown and drive for Helioscreen 47 x 2 Crown 9 147 327 Drive 9 147 545 Crown 9 014 677 Drive 9 500 322 Mado 50 Crown and drive for Mado 50 Döhner 61 Welser 63 Crown and drive for Döhner 63, Welser 61 Crown 9 132 139 Drive 9 132 138 Crown 9 500 340 Drive 9 500 341 Crown and drive for ZF 45 tube Crown 9 500 455 Drive 9 500 444 ø 40x1 Crown 9 132 143 Crown and drive for ø 40 x 1 Drive 9 132 142 The crown reference numbers on this page may be subject to change due to product evolution. >> Tube adapters 292

Tube adapters series 50 - round tube Crown Drive Crown and drive for ø 50 x 1.5 ø 50x1.5 ø 63x1.5 Crown and drive for ø 63 x 1.5 Crown standard Drive 9 206 088 Crown 9 707 026 Drive 9 206 019 ø 50x1.5 Crown and drive for ø 70 x 1.5 ø 70x2 Crowns and Drive for ø 7 0 x 2 Crown 9 707 031 Drive 9 206 028 Crown 9 707 031 Drive 9 420 313 ø 89x2 Crowns and Drive for ø 89 x 2 ø 101.6x3.6 Crown and drive for ø 101.6 x 3.6 Progress circuit 9 707 026 Crown 9 520 312 Drive 9 420 303 Progress circuit 9 707 026 Crown 9 420 371 Drive 9 420 309 ø 102x2 Crowns and Drive for ø 102 x 2 Progress circuit 9 707 026 Crown 9 420 370 Drive 9 420 304 Crown and drive adapters LS40/ LT50 Adapter set 9 013 763 Adapter set for use with the LS40 motor on a 50 mm tube. The crown reference numbers on this page may be subject to change due to product evolution. >> Tube adapters 293

Tube adapters series 50 - tube with groove Crown Drive Deprat Axion 2000 ø62x0.6 Crown and drive for Deprat, Axion 2000 Mado 65 Sunmaster, Döhner 63 Crown and drive for Mado 65, Sunmaster 65, Döhner 63 Crown 9 410 300 Drive 9 410 302 Crown 9 707 030 Drive 9 751 002 Imbac 70 Crown and drive for Imbac 70 Döhner 70 Crown and drive for Döhner 70 x 0.8 (x1) Crown 9 128 424 Drive 9 751 005 Crown 9 707 034 Drive 9 751 005 Welser 70 x 1.2 Crown and drive for Welser 70 x 1.2 With flat groove Döhner 74 Crown and drive for Döhner 74 x 1 Crown 9 128 429 Drive 9 410 303 Crown 9 707 037 Drive 9 751 009 Döhner 78 Crown and drive for Döhner 78 Flat and round groove Crown 9 707 027 Drive 9 761 001 Döhner 85 Crowns and drive for Döhner 85 Crown 9 707 035 Drive 9 761 003 The crown reference numbers on this page may be subject to change due to product evolution. >> Tube adapters 294

Tube adapters series 50 - tube with groove Crown Drive Mado 80 Reynolds 83 Crown and drive for Madopron 80, Reynolds 83 Imbac 85 Crown and drive for Imbac 85 Progress circuit 9 707 026 Crown 9 128 427 Drive 9 420 305 Progress circuit 9 707 026 Crown 9 690 085 Drive 9 420 300 Crown and drive for Warema 85 tube Crown and drive for tube 100 Crown 9 701 188 Drive 9 610 003 Crown 9 420 370 Drive 9 013 969 The crown reference numbers on this page may be subject to change due to product evolution. >> Tube adapters 295

Tube adapters series 50 - profiled tube Crown Drive Octo 50 Crown and drive for Octo 50 Döhner Selve Stafer SW 60 Crown and drive for Döhner Selve Stafer SW 60 Crown 9 705 345 Drive 9 705 344 Crown 9 707 025 Drive 9 751 001 Selve SW 70 Crowns and drive for Selwe SW 70 ZF 54 Crown and drive for ZF 54 Crown crown 9 707 026 Crown 9 705 340 Drive 9 761 002 Drive* 9 606 133 * In Aluminium Crown 9 001 165 Drive 9 410 423 Crown and drive for Imbac 60 Imbac 60 ZF 80 Crown and drive for ZF 80 Crown 9 148 317 Crown 9 128 890 Drive 9 751 001 Drive 9 420 302 Crown crown 9 707 026 The crown reference numbers on this page may be subject to change due to product evolution. >> Tube adapters 296

Tube adapters series 60 - round tube Crown Drive Drive for ø 63 x 1.5 ø 63x1.5 ø 50x1.5 Crown and drive for ø 70 x 1.5 Crown standard Drive 9 206 019 Crown 9 420 342 Drive 9 206 028 ø 83x1.5 Crown and drive for ø 83 x 1.5 ø 89x2 Crown and drive for ø 89 x 2 Crown 9 700 977 Drive 9 420 306 Crown 9 520 312 Drive 9 420 303 ø 101.6x3.6 Crown and drive for ø 101.6 x 3.6 Mischler 100 Crown and drive for Mischler 100 Crown 9 420 371 Drive 9 420 309 Crown 9 420 370 Drive 9 420 304 The crown reference numbers on this page may be subject to change due to product evolution. >> Tube adapters 297

Tube adapters series 60 - round tube Crown Drive Crowns and drive for ø 10 8 x 4 Crown and drive for ø 130 x 2 ø 108x4 ø 130x2 Progress circuit 9 520 312 Crown 9 530 368 Drive 9 420 307 Crown 9 520 391 Drive 9 420 308 ø 133x2.5 Crown and drive for ø 133 x 2.5 ø 70x2 Crown and drive for ø 70 x 2 Crown 9 520 413 Drive 9 420 310 Crown 9 420 342 Drive 9 420 313 ø 100x2 Crown and drive for ø 1 00 x 2 ø 133x4 Crown and drive for ø 133 x 4 Crown 9 420 372 Crown 9 520 435 Drive 9 420 358 Drive 9 420 311 The crown reference numbers on this page may be subject to change due to product evolution. >> Tube adapters 298

Tube adapters series 60 - tube with groove Crown Drive Crown and drive for Döhner 78 (flat groove) Döhner 78 Döhner 78 Crown and drive for Döhner 78, Welser 78ling (round groove) Crown 9 705 341 Drive 9 761 001 Drive* 9 912 030 Crown 9 701 051 Drive 9 761 005 * In Aluminium Röchling Welser 78 Crown and drive for Welser 78 (flat groove) Mado 80 Reynolds 83 Crown and drive for Mado 80 Reynolds 83 Crown 9 707 638 Drive 9 761 001 Crown 9 128 427 Drive 9 420 305 Döhner 85 Crown and drive for Döhner 85 Crown 9 701 053 Drive 9 761 003 The crown reference numbers on this page may be subject to change due to product evolution. >> Tube adapters 299

Tube adapters series 60 - profiled tube Crown Drive Selve SW 70 Crown and drives for Selwe SW 70 Heroal SW 125 Crown and drive for Heroal SW 125 Crown 9 705 340 Drive 9 761 002 Drive* 9 606 133 Crown 9 701 069 Drive 9 420 343 * In Aluminium Crown and drives for Imbac 85 Crown and drive for ZF 80 Imbac 85 ZF 80 Crown 9 690 085 Drive 9 420 300 Crown 9 128 890 Drive 9 420 302 The crown reference numbers on this page may be subject to change due to product evolution. >> Tube adapters 300

Motor brackets series 40 LS 40 Motor bracket 9 147 337 Supplied with 3 self-tapping screws. Centre to centre distance 48 mm. Must be used with screws supplied. LS 40 Motor bracket 9 147 334 Supplied with 3 self-tapping screws. Is placed directly on the LS 40 motor head. Must be used with screws supplied. LS 40 Motor block 9 028 446 Attachment with 2 screws. Includes split pin ø 3,5 mm. Centre to centre 37,5 to 48 mm. Dimensions: 72 X 24 X 16 mm. To be used with bracket ref. 9 147 334 Max. weight 160 kg. LS 40 Motor bracket 9 701 240 Attachment with 2 M6 screws. Centre to centre distance 48 mm. Dimensions: 60 x 25 mm. To be used with bracket ref. 9 147 344 Max. weight 100 kg. Including split pin. LS 40 Motor bracket 9 410 665 Includes split pin ø 3,5 mm. Dimensions: 80 X 95 X 34 mm. To be used with bracket ref. 9 147 344 Max. weight 85 kg. LS40 - LT50 Adapter bracket 9 500 659 To use LS40 and Alus 40 RTS motors with LT50 brackets. Motor block 9 929 301 Motor block 9 929 302 Applicable for glider bearing system. Suitable for straight assembly. Dim.: 32 x 32 x 7 mm. Check the max. load of the Glider bearing system. Applicable for glider bearing system. Suitable for assembly under 45. Dim.: 32 x 32 x 7 mm. Check the max. load of the Glider bearing system. >> Motor brackets 301

Motor brackets series 50 Universal motor bracket Universal motor bracket Universal motor bracket 9 910 000 9 910 001 9 910 003 Attachment: 2 holes ø 6 mm centre to centre distance 48 mm or 2 holes ø 8 mm centre to centre distance 60 mm Includes safety clip. Usable with half-high DIN nuts. Max. weight 250 kg. Bag of screws ref. 670 002 can be used. Supplied with nuts for attachment with M6 bolts centre-to-centre distance 48 mm and M8 centre-to-centre distance 60 mm. Includes safety clip. Max. weight 250 kg. Bag of screws ref. 670 002 can be used. Incl. security clip with screw lock. Attachment: 2 holes ø 6 mm centre to centre distance 48 mm or 2 holes ø 8 mm centre to centre distance 60 mm. Max. weight 250 kg. Motor bracket Motor bracket Motor bracket 9 410 715 9 410 651 9 002 550 Centre to centre distance 34 x 83 mm. Not compatible with series 60 motors. Max. weight 60 kg. Angle bracket and safety clip. Dimensions: 80 X 95 X 35 mm. For motors up to 50 Nm. Max. weight 85 kg. Angle bracket and safety clip. Not compatible with series 60 motors. Max. weight 170 kg. Universal motor bracket 9 206 029 For weld installation. Untreated steel. Motor bracket 9 910 013 Secures directly on the motor head with the 2 self-tapping screws provided. To be used to replace a LS 50 e,g, with a LT 50, where a tube has to be reduced. Maximum load: 30 Nm. centre-centre dist. 29 and 40 mm. Motor bracket 9 410 612 ø 8 mm, centre to centre distance 80 mm for screws with a countersunk head. ø 5 mm, centre to centre distance 48 mm for screws with a countersunk head. Suitable for all series 50 motors. Secures directly on the motor head with the 2 self-tapping screws provided. >> Motor brackets 302

Motor brackets series 50 Mini motor bracket Motor bracket to screw Attachment clip 9 705 909 9 763 508 9 206 033 Includes safety clip. Attachment: 2 holes ø 6 mm centre to centre distance 48 mm. Dimensions: 70 x 38 mm. Maximum load: 25 Nm. Supplied with a universal - motor bracket and safety clip. Attachment: 4 holes ø 6 mm centre to centre distance 85 mm. Dimensions: 100 X 100 X 3 mm. Stainless steel. To be used with all motors up to a torque of 100 Nm. Safety clip (with screw) Safety clip (with ring) Adjustable motor bracket 9 910 002 9 685 025 9 703 948 Stainless steel. Secures the motors using screw lock. Recommended when using motors 100Nm or above. Stainless steel. Recommended for all motors with a torque below 100 Nm. Supplied without screws and with attachment clip ref. 9 685 025 Not compatible with series 60 motors. Max. weight 170 kg Motor bracket 9 910 009 Supplied with safety clip ref. 9 685 025 Centre to centre hole distance 48 mm. Bag of screws ref. 670 002 can be used. Maximum load: 85 Nm. Roundhead motor bracket 9 910 018 To be used for Roundhead LT50 motor. Motor notch 9 410 610 Supplied with 2 self-tapping screws. Assembly straight or under 45. Check the max. load of the glider bearing system. >> Motor brackets 303

Motor brackets series 50 Motor bracket Motor bracket Omega motor bracket 9 910 008 Supplied with safety clip ref. 9 685 025 Supplied with nuts for attachment to M6 or M8 bolts. Bag of screws ref. 670 002 can be used. Max. load: 85 Nm, centre to centre distance: 48 mm 9 410 703 For roller shutter boxes of the Helmitin, Eureko, BF Deprat and Rehau type. Attachment: 2 holes ø 5.2 mm centre to centre distance 100 mm. Not compatible with series 60 motors. Max. weight 60 kg 9 410 711 Attachment: 2 holes ø 4.2 mm centre to centre distance 100 mm. Height 24 mm. Not compatible with series 60 motors. Maximum load: 50 Nm. Motor bracket Motor bracket Motor bracket 9 410 707 For SKS and Imbac type roller blind cassettes. Attachment: 2 holes ø 5.2 mm centreto-centre distance 102 mm (SKS) and 2 holes ø 6.3 mm centre-to-centre distance 75 mm (Imbac). Not compatible with series 60 motors. Max. weight 60 kg 9 410 705 For Veka type roller shutter boxes. Attachment: 2 holes ø 4.2 mm centre to centre distance 90 mm. Supplied with safety clip ref. 9 206 033. Not compatible with series 60 motors. Max. weight 60 kg 9 410 603 For roller shutter boxes of the Lucobaie, Modulo type from Imbac, Schüco and Starbox from Deceuninck. Not compatible with series 60 motors. Maximum load: 30 Nm. Supplied with screws. Motor bracket 9 410 621 For Kommerling type roller shutter boxes. Attachment: 2 holes ø 4.2 mm centre to centre distance 42 mm. Thickness of the screw head (conical): max. 2.5 mm Not compatible with series 60 motors. Maximum load:25 Nm. >> Motor brackets 304

Motor brackets series 50/ CSI and 60/ CSI Motor bracket for CSI/ RDO Motor bracket for CSI/ RDO Motor bracket for CSI/ RDO 9 910 040 Attachment: 2 M6 holes centre-tocentre distance 44 or 48 mm or 2 M8 holes centre-to-centre distance 60 mm. In Aluminium Supplied with nuts and screws. 9 706 034 For LT 50/ 60 CSI Secures directto the motor head. Dimensions: 100 X 100 X 3 mm. 9 910 051 In composite material. Makes it possible to use the Hipro Motor brackets with a CSI motor. Motor bracket for CSI/ RDO Motor bracket for CSI/ RDO Motor bracket for CSI/ RDO 9 420 646 9 420 647 9 410 658 In aluminium. Attachment: 2 M6 holes centre-tocentre distance 44 or 48 mm or 2 M8 holes centre-to-centre distance 60 mm or 70 mm. Possible to position the motor head per 13. Supplied with nuts and screws. In aluminium. Attachment: 2 M6 holes centre-tocentre distance 44 or 48 mm or 2 M8 holes centre-to-centre distance 60 mm or 70 mm. Possible to position the motor head per 13. Supplied with nuts and screws. Galvanised, suitable for motors up to 50 Nm. Attachment: 3 holes ø 6.2 mm centre to centre distance. 86 mm (installation support on motor head), 2 holes ø 6.2 mm centre to centre distance. 48 mm, 2 grooves with centre to centre distance. 48 mm (for placement at a 120 angle). Supplied with nuts and screws. >> Motor brackets 305

Motor brackets series 60 Universal motor bracket Universal motor bracket Universal motor bracket 9 910 000 Attachment: 2 holes ø 6 mm centre to centre distance 48 mm or 2 holes ø 8 mm centre to centre distance 60 mm Includes safety clip. Max. load: 80 Nm, Max. load 250 kg. Screws ref. 670 002 can be used. 9 910 001 Supplied with nuts for attachment with M6 bolts centre-to-centre distance 48 mm and M8 centre-tocentre distance 60 mm. Includes safety clip. Max. load: 80 Nm, Max. load 250 kg. Screws ref. 670 002 can be used. 9 910 003 Including security clip with screw lock. Attachment: 2 holes ø 6 mm centre to centre distance. 48 mm or 2 holes ø 8 mm centre-to-centre distance 60 mm Recommended for use with 100 Nm and 120 Nm motors. Max. weight 250 kg. Motor bracket 9 704 029 Motor bracket to replace a LS 60 motor with a new series 60 motor. Max. load: 100 Nm with use of safety clip 9 910 002. Includes safety clip. Dimensions: 85 X 85 X 20 mm. Motor bracket 9 763 502 Equipped with a welded steel motor bracket and safety clip. Galvanised. Dimensions: 175 x 80 x 1,5 mm. Maximum load: 80 Nm. Motor bracket 9 763 508 Provided with a universal - motor bracket and safety clip. Attachment: 4 holes ø 6 mm centre to centre distance 85 mm. Dimensions: 100 X 100 X 3 mm. Maximum load: 80 Nm. Safety clip 9 206 033 Stainless steel. Maximum load: 85 Nm. Safety clip (with screw) 9 910 002 Stainless steel. Secures the motors using screw lock. Clip to be used when using 100/ 120 Nm. >> Motor brackets 306

Motor brackets series 60 Safety clip (with ring) Motor bracket Motor bracket 9 685 025 Stainless steel. Suitable for motors with a torque value below 100 Nm. 9 420 601 For roller shutters equipped with a universal motor bracket ref. 9 910 000. Supplied with screws and safety clip ref. 9 206 033. Maximum load: 85 Nm Max. weight 170 kg. 9 701 091 To be used with support ref. 9 763 502 or 9 763 702. Attachment: 4 nuts M10x30. Max. weight 250 kg. Adjustable motor bracket Motor bracket Motor bracket 9 763 702 Lockable clip. Thickness 2 mm. 9 420 602 Supplied with a universal motor bracket ref. 9 910 000. 3 possible centre-to-centre distances Supplied with screws and safety clip ref. 9 206 033. Max. load: 85 Nm, Max. load 250 kg. 9 763 503 Supplied with a universal - motor bracket and safety clip. Attachment: 4 holes ø 6 mm centre to centre distance 85 mm. Dimensions: 100 X 100 X 3 mm. Maximum load: 80 Nm. Motor bracket 9 910 009 Supplied with a safety clip ref. 9 685 025. Centre to centre distance for attachment holes of 48 mm. Screws ref. 670 002 can be used. Max. load: 85 Nm. Motor bracket 9 910 008 Supplied with a safety clip with ring ref. 9 685 025. Attachment: nuts supplied for M6 or M8 bolts, centre-to-centre distance 44 mm. Maximum load: 85 Nm Screws ref. 670 002 can be used. Motor bracket 9 420 624 Supplied with a safety clip with ring ref. 9 685 025. Centre to centre distance for attachment holes of 44 mm. Max. load: 85 Nm. >> Motor brackets 307

Supply cable Altus 50/ 60 RTS, Orea 50/ 60 RTS and Oximo 50 RTS Motor cable white Motor cable white Motor cable black 9 203 863 3-core VVF cable. Length 5 m. Also for LT RTS and IPSO RTS. 9 203 889 3-core VVF cable. Length 10 m. Also for LT RTS AND IPSO RTS. 9 203 899 3-core VVF cable. Length 3 m. Also for LT RTS and IPSO RTS. Motor cable black 9 710 131 RRF type with operating plug connected. Length 50 cm. Only to be used with RTS tubular motors. Neutral wire on clasp n 1. Live wire on clasp n 2. >> Supply cables 308

Supply cable LT 50/ 60 and SLT 50/ 60 Motor cable white Motor cable white Motor cable white 9 203 803 9 203 804 9 203 805 VVF type with plug. Length 3 m. VVF type with plug. Length 5 m. VVF type with plug. Length 10 m. Motor cable black Motor cable black Motor cable black 9 203 834 9 203 839 9 765 501 RRF type with plug. Length 3 m. RRF type with plug. Length 10 m. RRF type with operating plug. Length 50 cm. Only to be used with standard tubular motors. Neutral wire on clasp n 1. Info Motor cable black 9 928 223 RRF type with operating plug connected. Length 50 cm. Only to be used with standard tubular motors. Neutral wire on clasp n 2. Motor cable black 9 928 223 RRF type with operating plug connected for connection in the motor. Length 5 m. The main difference between the white (VVF) and black (RRF) motor cable is the U.V. and mechanical resistance. In general: RRF cable can be installed outside and be visible. VVF cable should be installed inside or protected in conduit/ trunking if outside. >> Supply cables 309

Supply cable LT 50/ 60 and SLT 50/ 60 Operating plug 9 928 222 With cast cable (black, type RRF). For connection in the installation. Length 3 m. Neutral wire on clasp 2. Operating plug 9 928 226 With cast cable (black, type RRF). For connection in the installation. Length 5 m. Neutral wire on clasp 2. Operating plug 9 928 225 With cast cable (black, type RRF). For connection in the installation. Length 10 m. Neutral wire on clasp 2. Protective cap 9 206 012 Protects the plug against damp and dirt if removed from the motor. Operating plug 708 617 With cast cable (black, type RRF). For connection in the installation. Length 5 m. Neutral wire on clasp 1. Standard version for Belux. Operating plug 708 616 With cast cable (black, type RRF). For connection in the installation. Length 10 m. Neutral wire on clasp 1. Standard version for Belux. >> Supply cables 310

Supply cable LT 50/ CSI and LT 60/ CSI Motor cable/ CSI white 9 208 283 VVF type with plug. Length 3 m. Motor cable/ CSI white 9 208 284 VVF type with plug. Length 5 m. Motor cable/ CSI white 9 208 285 VVF type with plug. Length 10 m. L1 L1 L L Motor cable/ CSI black 9 208 294 RRF type with plug. Length 3 m. Motor cable black with left microswitch 9 705 657 RRF type with plug. With left microswitch. Motor cable black with right microswitch 9 705 656 RRF type with plug. With right microswitch. Info The main difference between the white (VVF) and black (RRF) motor cable is the U.V. resistances and the mechanical resistance. In general: RRF cable can be installed outside and be visible. VVF cable should be installed inside or protected in conduit/ trunking if outside. >> Supply cables 311

Connection plugs Mounted operating switch Hirshman plug & socket Connecting plug 9 928 203 3 x single-core contacts. Spray proof. Maximum load 660 Volt - 12 A. Colour: grey. Dim.: 64 x 64 x 46 mm. 9 701 566 Complte plug & socket. Colour: black Dim.: 149 x 28 x 21 mm. 9 686 064 3-pin+ double earth contact. IP 54 splash proof. VDE-approved. Plug - female. Dimensions: 82 X 28 X 21 mm. With connecting bridge. For use with ref. 9 686 065 or ref. 9 765 501. Locking clamp Connecting socket Square welding box 9 928 201 To be used with thehirshman plug & socket 9 686 065 3-pin+ double earth contact. IP 54 splash proof. VDE-approved. Plug - male. Dimensions: 82 X 28 X 21 mm. For use with ref. 9 686 064. 9 990 050 Synthetic weld box with 5-way connecting strip. Exclusively permitted for safe very low voltage to a max. of 50 volt. Without clip strip. Dim.: 70 x 70 x 50 mm. Wiring recommendation for plug ref.: 9 686 065 and 9 686 064. 9 686 065 Combined with: 9 928 222-9 928 223-9 928 225-9 928 226 3 = black 2 = blue 1 = brown 4 = yellow/ green Combined with: 9 765 501-708 616-708 617 3 = black 2 = brown 1 = blue 4 = yellow/ green >> Supply cables 312

Other cables and accessories Motor cable white 9 128 097 Type VVF - 4 x 0.75 mm2. Supplied on 50 metre rolls. Motor cable white 9 129 294 Type VVF - 3 x 0.75 mm2. Supplied on 50 metre rolls. Motor cable black 9 990 051 Type RRF - 5 x 0.75 mm2. For use with FTS LT motors. Junction box 9 128 088 Junction box with 5-way connecting strip. Dim. ø 77 mm, depth 39 mm. >> Supply cables 313

Accessories series 40 Plug end without shaft Plug end shaft End cap LS40 9 129 630 For tube ø 40 x 1.5 and ø 40 x 1 To be used with shaft ref. 1,781,009 or interim support ref. 9 146 010. 1 781 009 For plug ends ref. 9 129 630, 9 129 631, 9 129 632, 9 129 633, 9 129 655. Pin ø 12. 9 147 894 For Series 40 tubular motors. Supplied with screw. ABS installed on the left 9 704 139 A drive wheel is required to adapt to the tube profile. ABS installed on the right 9 704 138 A drive wheel is required to adapt to the tube profile. >> Accessories 314

Accessories series 50 and series 60 Info The Somfy ABS system for roller shutters provides an obstacle detection function in the downwards direction. The system disconnects if the casing gets stuck or hits an obstacle. The final setting of the motor is not affected by this. The Somfy ABS system can be used on motors from the series 50 (except Ilmo WT, Oximo RTS, Oximo WT, Orea WT, Altus RTS and Orea RTS) and series 50/ CSI with a connection up to 30 Nm. Suitable for use with smaller roller shutters with an aluminium or plastic casing. There is an ABS system for both mounting situations, regardless of whether the motor is installed to the right or left. INSIDE INSIDE ABS installed on the left 9 705 415 If the roller shutter is installed according to the drawing above, then reference number 9 705 415 is required. For ø 50 motors to max. 30 Nm. Left: The arrow indicates the downwards turning direction. A drive wheel is required to adapt to the tube profile. ABS installed on the right 9 705 414 If the roller shutter is installed according to the drawing above, then reference numbe 9,705,414 is required. For ø 50 motors to max. 30 Nm. Right: The arrow indicates the downwards turning direction. A drive wheel is required to adapt to the tube profile. >> Accessories 315

Accessories series 50 and series 60 End cap LT50 End cap Test lead 9 910 004 9 910 062 9 013 022 For tubular motors series 50. Secures the drive wheel. Supplied with screw. For tubular motors series 60. Secures the drive wheel. Supplied with screw. Test lead for WT motors. Limit setting accessory Limit setting accessory Bag of screws 9 420 613 9 206 050 9 670 013 For pressing down hard to reach limit buttons. Length: 20 cm Tool with hook for setting push button limits. Bag of 100 screws ø 5 mm. For direct installation of the motor. For LT50. Adjustment accessory 9 206 050 Bag of screws 9 670 002 Test lead 9 686 030 With cord operation for adjustment in inaccessible situations. Can be installed permanently using a screw. For universal motor bracket in Zamak ref. 9 910 000 and 9 910 001. Comprises: - 2 screws HM 8x2.5 and 2 HM 6x20-2 round plates M8.N and 2 L6.N - 2 nuts H 8 and 2 H 6-2 screws F.5.M 8x20 Test lead to commission hard wired 4 core motors. >> Accessories 316

Accessories series 50 and series 60 Plug end without shaft Plug end without shaft Plug end without shaft 9 129 631 9 129 655 9 129 632 For round tube ø 50 or with canvas groove To be used with shaft ref. 1 781 009. For round tube ø 60 or with canvas groove To be used with shaft ref.ef. 1 781 009. For round tube ø 63 or with canvas groove. To be used with shaft ref.ef. 1 781 009. Plug end without shaft Plug end shaft Protective cap 9 129 633 For round tube ø 70 or with canvas groove. To be used with shaft ref.f. 1 781 009. 1 781 009 Pin ø 12. 205 725 (sp) Protects the limit buttons. Short plug end For tube ZF 54 9 014 470 For tube octo 60 9 014 469 Maximum load 6Nm. Shaft for short plug end 9 014 468 For use with the short plug end. Maximum load 6Nm. Setting tool WT 1 824 009 Simple setting box for Oximo 50 WT, Orea 50 WT and Orea 60 WT motors. Reliable setting through a menu procedure that can be followed from a LCD display. Easy to operate and to use. Easy connection with quick connector. >> Accessories 317

Accessories series 50 and series 60 Plug end ø 12 mm Plug end ø 12 mm Intermediate bracket with plug ends 9 420 801 Can be adapted to suit any tube by using adapters from the Hipro series. Maximum casing weight: 40 kg Adjustment distance: 30mm Max. load: LT 50; 50 Nm; FTS 50; 25 Nm. 9 410 633 End axle support with bearing. Suitable for installation of end axle with ø 12 mm. Max. weight 85 kg. Max. load: 50 Nm. 9 410 654 Delivered as standard with 2 axle props. Can be adapted to suit any tube by using adapters from the Hipro series. Max. load: 15 Nm. Shaft for heavy load Plug end (not adjustable) Short plug end 9 420 674 9 132 087 1 013 878 Can be adapted to any tube profile by using adapters from the Hipro series. Max. load: 120Nm Max. weight: with alu adapters; 250kg. with plastic adapters; 170 kg. For round tube ø 50 x 1.5 mm. To be used with bracket 9 028 678. Spindle ø 12.. Suitable for all tubeswhere a 50 diameter motor fits using an crown. No crown required for tube ZF 54 and Deprat 53. Max. weight: 10 kg. Rigid strap 1 link (ZF) Rigid link 1 780 757 1 link (ZF) Locking strap for roller shutter in DOWNWARDS direction. Suitable for use with motors up to 20 Nm. For tube octo 40, 50 and 60. Rigid strap 2 links (ZF) For tube octo 40 1 780 758 For tube octo 50 1 780 759 and 60 Locking strap for roller shutter in DOWNWARDS direction. Suitable for use with motors up to 20 Nm. Rings for rigid straps Rings for octo 40 1 780 760 Rings for octo 50 1 780 761 Rings for octo 60 1 780 762 >> Accessories 318

Accessories series 50 CSI/ RDO and 60 CSI/ RDO Eye outlet length 62.5 mm Eye outlet length 165 mm Eye outlet length 175 mm 9 685 114 9 685 136 9 685 037 For motors with emergency manual operation. Supplied with screws. Length: 62.5 mm Shaft: hexagonal 7 mm. For motors with emergency manual operation. Supplied with screws. Length: 165 mm Shaft: hexagonal 7 mm. For motors with emergency manual operation. Supplied with screws. Length: 175 mm Shaft: hexagonal 7 mm. Eye outlet (60 ) with eye. Extended outlet (60 ) with eye and elbow Vertical extended outlet with eye and elbow 9 685 180 9 685 183 9 685 182 Equipped with a hexagonal shaft of 7 mm - length 260 mm. Equipped with a hexagonal shaft of 7 mm - length 315 mm. Equipped with a hexagonal shaft of 7 mm - length 315 mm. Extended outlet with eye and double elbow Extended outlet (60 ) Shaft extension 9 685 181 Equipped with a hexagonal shaft of 7 mm - length 350 mm. 9 685 171 Equipped with a hexagonal shaft of 7 mm - 260 mm long - accepts a 10mm hexagonal shaft. 9 420 657 Hexagon 7 mm. Length 220 mm. >> Accessories 319

Accessories series 50 CSI/ RDO and 60 CSI/ RDO Shaft extension Extended outlet for CSI Double elbow coupler hexagonal 7/ hexagonal 7 9 420 659 9 685 142 9 685 144 Hexagon 7 mm. Length 330 mm. Equipped with a hexagonal shaft of 7 mm - 340 mm long. Colour: white. To be used with crank ref. 9 685 140 Colour: white. Fixed arm Coupler Coupler 9 685 176 9 685 120 9 685 118 To be used with the outward operating axle ref. 9 685 181, ref. 9 685 182, ref. 9 685 183. Length: 1,600 mm Colour: white. Supplied with wall support. For hexagonal 7 mm. Supplied with 2 split pins. To couple a 7 mm hexagon to 8 mm square. Supplied with accessories. Crank CSI/ RDO limit Crank 9 685 140 To be used with outlet ref. 9 685 142. Length: 1.25M. Colour: white. Folding. 9 910 019 Set of 2 steel extension clips. 9 990 054 Length: 1.6M. >> Accessories 320

Accessories series 50/ CSI and 60/ CSI Crank 9 990 055 With hook. Length: 1.8M. Crank 9 990 056 With hook. Length: 2M. Extended outlet with eye 9 685 184 Equipped with a plastic eye. Length: 43 cm Extended outlet 9 085 122 Internal outlet: hexagonal 7 mm. Length: 35 cm >> Accessories 321

Technical data Altus 40 RTS 13,7 X Y 29 Ø 38,2 Ø 12 60 Cable Blue = neutral Brown = live Altus 40 RTS 3/ 30 Altus 40 RTS 4/ 14 Altus 40 RTS 9/ 14 Altus 40 RTS 13/ 8 X = motor length (mm) Y = drill distance (mm) Torque (Nm) RPM (rev/ min.) Tensile strength of tube ø 40 mm (kg) Limit capacity (rev.) Tolerance Power (Watt) Voltage (Volt) Current (Ampere) Maximum run time (min.) Maximum motor temperature ( C) Minimum tube diameter (mm) Weight (kg) 497 457 497 497 473 433 473 473 3 4 9 13 30 14 14 8 15 20 45 65 500 500 500 500 <±3 <±3 <±3 <±3 80 65 100 95 230 230 230 230 0.4 0.35 0.5 0.5 4 4 4 4 140 140 140 140 40 x 1.5 40 x 1.5 40 x 1.5 40 x 1.5 1.08 1.01 1.18 1.21 Length of the cable (m) Number of cores Diameter of the cores (mm 2 ) Protection class Minimum/ maximum environment temperature ( C)) CEBEC-approval 3 3 3 3 2 2 2 2 0.75 0.75 0.75 0.75 IP 44 IP 44 IP 44 IP 44 l l l l >> Technical data 322

Technical data Altus 50 RTS X Y Ø 47 17 20 25 3,95 Ø 63 Cable Blue = neutral Brown = live Yellow/ green = earth Altus RTS 6/ 17 Altus RTS 10/ 17 Altus RTS 15/ 17 Altus RTS 20/ 17 Altus RTS 25/ 17 Altus RTS 30/ 17 Altus RTS 6/ 32 Altus RTS 10/ 32 Altus RTS 35/ 17 Altus RTS 40/ 17 Altus RTS 50/ 12 X = motor length (mm) 605 655 655 655 655 675 655 655 675 745 675 Y = drill distance (mm) 590 640 640 640 640 660 640 640 660 730 660 Torque (Nm) 6 10 15 20 25 30 6 10 35 40 50 RPM (rev/ min.) 17 17 17 17 17 17 32 32 17 17 12 Tensile strength of tube ø 50 mm (kg) 24 40 60 80 100 120 24 40 140 160 200 Limit capacity (rev.) 250 250 250 250 250 250 250 250 250 250 250 Tolerance <±3 <±3 <±3 <±3 <±3 <±3 <±3 <±3 <±3 <±3 <±3 Power (Watt) 90 120 140 160 170 240 120 160 240 270 270 Voltage (Volt) 230 230 230 230 230 230 230 230 230 230 230 Current (Ampere) 0.45 0.5 0.65 0.75 0.8 1.1 0.5 0.75 1.1 1.2 1.1 Maximum run time (min.) 4 4 4 4 4 4 4 4 4 4 4 Maximum motor temperature ( C) 140 140 150 150 150 150 140 150 150 140 150 Minimum tube diameter (mm) 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 Weight (kg) 1.72 1.85 1.95 2.15 2.2 2.55 2.2 2.2 2.55 2.8 2.75 Length of the cable (m) 3 3 3 3 3 3 3 3 3 3 3 Number of cores 3 3 3 3 3 3 3 3 3 3 3 Diameter of the cores (mm 2) 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 Protection class IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 Minimum/ maximum environment temperature ( C) CEBEC-approval l l l l l l l l l l l >> Technical data 323

Technical data Altus 60 RTS X Y Ø 60 17 23 34 7,5 Ø 63 Cable Blue = neutral Brown = live Yellow/ green = earth Altus RTS 55/ 17 Altus RTS 70/ 17 Altus RTS 85/ 17 Altus RTS 100/ 12 Altus RTS 120/ 12 X = motor length (mm) 734 734 734 734 734 Y = drill distance (mm) 717 717 717 717 717 Torque (Nm) 55 70 85 100 120 RPM (rev/ min.) 17 17 17 12 12 Tensile strength of tube ø 63 mm (kg) 175 222 270 317 381 Limit switch capacity (rev.) 200 200 200 200 200 Tolerance <±3 <±3 <±3 <±3 <±3 Power (Watt) 320 410 450 410 450 Voltage (Volt) 230 230 230 230 230 Current (Ampere) 1.5 1.9 2.1 1.9 2.1 Maximum run time (min.) 4 4 4 4 4 Maximum motor temperature ( C) 150 150 150 150 150 Minimum tube diameter (mm) 63 x 1.5 63 x 1.5 63 x 1.5 63 x 1.5 63 x 1.5 Weight (kg) 4.39 4.82 5.03 4.82 4.91 Length of the cable (m) 3 3 3 3 3 Number of cores 3 3 3 3 3 Diameter of the cores (mm 2) 0.75 0.75 0.75 0.75 0.75 Protection class IP 44 IP 44 IP 44 IP 44 IP 44 Minimum/ maximum environment temperature ( C) CEBEC-approval l l l l l >> Technical data 324

Technical data Orea 50 RTS X Y Ø 47 17 20 25 3,95 Ø 63 Cable Blue = neutral Brown = live Yellow/ green = earth Orea RTS 6/ 17 Orea RTS 10/ 17 Orea RTS 15/ 17 Orea RTS 20/ 17 Orea RTS 25/ 17 Orea RTS 30/ 17 Orea RTS 35/ 17 Orea RTS 40/ 17 Orea RTS 50/ 12 X = motor length (mm) 605 655 655 655 655 675 675 745 675 Y = drill distance (mm) 590 640 640 640 640 660 660 730 660 Torque (Nm) 6 10 15 20 25 30 35 40 50 RPM (rev/ min.) 17 17 17 17 17 17 17 17 12 Tensile strength of tube ø 50 mm (kg) 24 40 60 80 100 120 140 160 200 Limit switch capacity (rev.) 250 250 250 250 250 250 250 250 250 Tolerance <±3 <±3 <±3 <±3 <±3 <±3 <±3 <±3 <±3 Power (Watt) 90 120 140 160 170 240 240 270 240 Voltage (Volt) 230 230 230 230 230 230 230 230 230 Current (Ampere) 0.45 0.5 0.65 0.75 0.8 1.1 1.1 1.2 1.1 Maximum run time (min.) 4 4 4 4 4 4 4 4 4 Maximum motor temperature ( C) 140 140 150 150 150 150 150 140 150 Minimum tube diameter (mm) 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 Weight (kg) 1.72 1.85 1.95 2.15 2.2 2.55 2.55 2.8 2.75 Length of the cable (m) 3 3 3 3 3 3 3 3 3 Number of cores 3 3 3 3 3 3 3 3 3 Diameter of the cores (mm2 ) 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 Protection class IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 Minimum/ maximum environment temperature ( C) CEBEC-approval l l l l l l l l l >> Technical data 325

Technical data Orea 60 RTS X Y Ø 60 17 23 34 7,5 Ø 63 Cable Blue = neutral Brown = live Yellow/ green = earth Orea RTS 55/ 17 Orea RTS 70/ 17 Orea RTS 85/ 17 Orea RTS 100/ 12 Orea RTS 120/ 12 X = motor length (mm) 734 734 734 734 734 Y = drill distance (mm) 717 717 717 717 717 Torque (Nm) 55 70 85 100 120 RPM (rev/ min.) 17 17 17 12 12 Tensile strength of tube ø 63 mm (kg) 175 222 270 317 381 Limit switch capacity (rev.) 200 200 200 200 200 Tolerance <±3 <±3 <±3 <±3 <±3 Power (Watt) 320 410 450 410 450 Voltage (Volt) 230 230 230 230 230 Current (Ampere) 1.5 1.9 2.1 1.9 2.1 Maximum run time (min.) 3 3 3 3 3 Maximum motor temperature ( C) 150 150 150 150 150 Minimum tube diameter (mm) 63 x 1.5 63 x 1.5 63 x 1.5 63 x 1.5 63 x 1.5 Weight (kg) 4.39 4.82 5.03 4.83 5.03 Length of the cable (m) 5 5 5 5 5 Number of cores 3 3 3 3 3 Diameter of the cores (mm 2) 0.75 0.75 0.75 0.75 0.75 Protection class IP 44 IP 44 IP 44 IP 44 IP 44 Minimum/ maximum environment temperature ( C) CEBEC-approval l l l l l >> Technical data 326

Technical data Oximo 50 RTS X Y Ø 47 17 20 25 3,95 Ø 63 Cable Blue = neutral Brown = live Yellow/ green = earth Oximo RTS 6/ 17 Oximo RTS 10/ 17 Oximo RTS 15/ 17 Oximo RTS 20/ 17 Oximo RTS 30/ 17 Oximo RTS 40/ 17 X = motor length (mm) 605 655 655 655 675 745 Y = drill distance (mm) 590 640 640 640 660 730 Torque (Nm) 6 10 15 20 30 40 RPM (rev/ min.) 17 17 17 17 17 17 Tensile strength of tube ø 50 mm (kg) 24 40 60 80 120 160 Limit switch capacity (rev.) 200 200 200 200 200 200 Tolerance <±3 <±3 ±3 <±3 <±3 <±3 Power (Watt) 90 120 140 160 240 270 Voltage (Volt) 230 230 230 230 230 230 Current (Ampere) 0.45 0.5 0.65 0.75 1.1 1.2 Maximum run time (min.) 3 3 3 3 3 3 Maximum motor temperature ( C) 140 140 150 150 150 140 Minimum tube diameter (mm) 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 Weight (kg) 1.72 1.85 1.95 2.15 2.55 2.8 Length of the cable (m) 5 5 5 5 5 5 Number of cores 3 3 3 3 3 3 Diameter of the cores (mm 2) 0.75 0.75 0.75 0.75 0.75 0.75 Protection class IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 Minimum/ maximum environment temperature ( C) CEBEC-approval l l l l l l >> Technical data 327

Technical data Oximo 50 RTS S Auto RTS X Y Ø 47 17 20 25 3,95 Ø 63 Oximo S Auto RTS module is always supplied Cable Blue = neutral Brown = live Yellow/ green = earth Oximo S Auto 6/ 17 RTS X = motor length (mm) 355 Y = drill distance (mm) - Torque (Nm) 6 RPM (rev/ min.) 17 Tensile strength of tube ø 50 mm (kg) 24 Limit switch capacity (rev.) n.v.t. Tolerance <±3 Power (Watt) 90 Voltage (Volt) 230 Current (Ampere) 0.45 Maximum run time (min.) 2 Maximum motor temperature ( C) 140 Minimum tube diameter (mm) 50 x 1.5 Weight (kg) 1.25 Length of the cable (m) 3 Number of cores 3 Diameter of the cores (mm 2) 0.75 Protection class IP 44 Minimum/ maximum environment temperature ( C) CEBEC-approval l >> Technical data 328

Technical data LT 50 CSI RTS X 24 Y 80 Ø47 91 3,95 86 Cable Blue = neutral Brown = direction of rotation 1 Black = direction of rotation 2 Yellow/ green = earth LT 50 10/ 17 CSI RTS LT 50 20/ 17 CSI RTS LT 50 30/ 17 CSI RTS LT 50 40/ 17 CSI RTS LT 50 50/ 12 CSI RTS X = motor length (mm) 774 774 774 774 774 Y = drill distance (mm) 759 759 759 759 759 Torque (Nm) 10 20 30 40 50 RPM (rev/ min.) 17 17 17 17 12 Tensile strength of tube ø 50 mm (kg) 40 80 120 160 200 Limit switch capacity (rev.) 34 34 34 34 34 Tolerance <±5 <±5 ±5 <±5 <±5 Manual over-ride ratio 27:1 27:1 27:1 27:1 27:1 Power (Watt) 120 160 240 240 240 Voltage (Volt) 230 230 230 230 230 Current (Ampere) 0.5 0.75 1.1 1.1 1.1 Maximum run time (min.) 2.5 2.5 2.5 2.5 2.5 Maximum motor temperature ( C) 140 150 150 140 150 Minimum tube diameter (mm) 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 Weight (kg) 2.69 2.69 3.21 3.21 3.21 Length of the cable (m) 2.5 2.5 2.5 2.5 2.5 Number of cores 3 3 3 3 3 Diameter of the cores (mm 2) 0.75 0.75 0.75 0.75 0.75 Protection class IP 44 IP 44 IP 44 IP 44 IP 44 CEBEC-approval l l l l l >> Technical data 329

Technical data Oximo 40 WireFree RTS CLASS II = no earth wire 13,5 X Y 29 Ø 38 Ø 36 Ø 12 60 Cable Blue = neutral Brown = direction of rotation 1 Black = direction of rotation 2 Oximo 40 WireFree RTS 3/ 23 Oximo 40 WireFree RTS 6/ 18 Oximo 40 WireFree RTS 10/ 12 X = motor length (mm) 457 457 457 Y = drill distance (mm) 433 433 433 Torque (Nm) 3 6 10 RPM (rev/ min.) 23 18 12 Tensile strength of tube ø 40 mm (kg) 8 16 20 Power (Watt) 90 120 140 Voltage (Vcc) 12 12 12 Current (Ampere) n.a. n.a. n.a. Maximum run time (min.) 3 3 3 Maximum motor temperature ( C) 140 140 150 Minimum tube diameter (mm) Octo 40 Octo 40 Octo 40 Weight (kg) - - - Length of the cable (m) 0.7 0.7 0.7 Number of cores 3 3 3 Diameter of the cores (mm 2) 0.75 0.75 0.75 Protection class IP 44 IP 44 IP 44 Minimum/ maximum environment temperature ( C) CE l l l >> Technical data 330

Technical data Altea 50 RTS X Y Ø 60 17,5 23 34 7,5 Ø 63 Cable Blue = neutral Brown = live Yellow/ green = earth Altea 6/ 17 Altea 6/ 32 X = motor length (mm) 605 655 Y = drill distance (mm) 590 640 Torque (Nm) 6 6 RPM (rev/ min.) 17 32 Tensile strength of tube ø 50 mm (kg) 24 24 Limit switch capacity (rev.) 250 250 Tolerance <±3 <±3 Power (Watt) 90 120 Voltage (Volt) 230 230 Current (Ampere) 0.45 0.5 Maximum run time (min.) 4 4 Maximum motor temperature ( C) 140 140 Minimum tube diameter (mm) 50 x 1.5 50 x 1.5 Weight (kg) 1.94 2.38 Length of the cable (m) 5 5 Number of cores 3 3 Diameter of the cores (mm 2) 0.75 0.75 Protection class IP 44 IP 44 Minimum/ maximum environment temperature ( C) CEBEC-approval l l >> Technical data 331

Technical data Solus Radio Kit X Y Ø 47 17 20 25 3,95 Ø 63 Cable Blue = neutral Brown = live Yellow/ green = earth Solus RK 10/ 12 Solus RK 20/ 12 Solus RK 30/ 12 Solus RK 40/ 12 X = motor length (mm) 655 675 715 745 Y = drill distance (mm) 640 660 700 730 Torque (Nm) 10 20 30 40 RPM (rev/ min.) 12 12 12 12 Tensile strength of tube ø 50 mm (kg) 40 80 120 160 Limit switch capacity (rev.) 29 29 29 29 Tolerance <±8 <±8 ±8 <±8 Power (Watt) 90 140 160 240 Voltage (Volt) 230 230 230 230 Current (Ampere) 0.45 0.65 0.75 1.10 Maximum run time (min.) 4 4 4 4 Maximum motor temperature ( C) 140 150 150 150 Minimum tube diameter (mm) 50x1.5 50x1.5 50x1.5 50x1.5 Weight (kg) 2.10 2.31 2.50 2.80 Length of the cable (m) 2.5 2.5 2.5 2.5 Number of cores 3 3 3 3 Diameter of the cores (mm 2) 0.75 0.75 0.75 0.75 Protection class IP 44 IP 44 IP 44 IP 44 Minimum/ maximum environment temperature ( C) -20/ -20/ -20/ -20/ CEBEC-approval l l l l >> Technical data 332

Technical data LS 40 CLASS II = no earth wire 13,5 X 29 Y Ø 38 Ø 36 Ø 12 60 Cable Blue = neutral Brown = direction of rotation 1 Black = direction of rotation 2 Mercure Aries S Aries Mars Vulcan X = motor length (mm) 442 398 442 442 453 Y = drill distance (mm) 421 377 421 421 433 Torque (Nm) 3 4 4 9 13 RPM (rev/ min.) 30 14 14 14 8 Tensile strength of tube ø 40 mm (kg) 15 20 20 45 65 Limit switch capacity (rev.) 40 40 40 40 40 Tolerance ±15 ±15 ±15 ±15 ±15 Power (Watt) 80 65 65 100 100 Voltage (Volt) 230 230 230 230 230 Current (Ampere) 0.4 0.35 0.35 0.5 0.5 Maximum run time (min.) 4 4 4 4 4 Maximum motor temperature ( C) 140 140 140 140 140 Minimum tube diameter (mm) 40 x 1.5 40 x 1.5 40 x 1.5 40 x 1.5 40 x 1.5 Weight (kg) 0.95 0.94 0.88 1.06 1.07 Length of white (VVF) cable (m) 2.5 2.5 2.5 2.5 2.5 Length of black (RRF) cable (m) - 0.3 0.3 0.3 Number of cores 3 3 3 3 3 Diameter of the cores (mm 2) 0.75 0.75 0.75 0.75 0.75 Protection class IP 44 IP 44 IP 44 IP 44 IP 44 CEBEC-approval l l l l l >> Technical data 333

Technical data LT 50 X Y 24 Ø 74 Ø 47 17 20 25 3,95 Ø 63 Cable Blue = neutral Brown = direction of rotation 1 Black = direction of rotation 2 Yellow/ green = earth Ariane Jet Atlas Meteor Gemini Helios Apollo Mariner Vectran Ariane 6/ 32 Jet 10/ 32 Atlas 15/ 32 X = motor length (mm) 505 525 525 555 555 605 605 655 605 525 555 605 Y = drill distance (mm) 490 510 510 540 540 590 590 640 590 510 540 590 Torque (Nm) 6 10 15 20 25 30 35 40 50 6 10 15 RPM (rev/ min.) 17 17 17 17 17 17 17 17 12 32 32 32 Tensile strength of tube ø 50 mm (kg) 24 40 60 80 100 120 140 160 200 24 40 60 Limit switch capacity (rev.) 46 46 46 46 46 46 46 46 46 46 46 46 Tolerance <±5 ±5 <±5 <±5 <±5 <±5 <±5 <±5 <±5 <±5 ±5 <±5 Power (Watt) 90 120 140 160 170 240 240 240 240 120 160 210 Voltage (Volt) 230 230 230 230 230 230 230 230 230 230 230 230 Current (Ampere) 0.4 0.5 0.65 0.75 0.8 1.1 1.1 1.1 1.1 0.5 0.75 1.1 Maximum run time (min.) 4 4 4 4 4 4 4 4 4 4 4 4 Maximum motor temperature ( C) Minimum tube diameter (mm) 140 140 150 150 150 150 150 150 150 140 140 150 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 Weight (kg) 1.72 1.85 1.95 2.15 2.20 2.55 2.55 2.55 2.55 1.85 2.15 2.55 Length of the cable (m) 3 3 3 3 3 3 3 3 3 3 3 3 Number of cores 4 4 4 4 4 4 4 4 4 4 4 4 Diameter of the cores (mm 2) 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 Protection class IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 CEBEC-approval l l l l l l l l l l l l >> Technical data 334

Technical data LT 60 X Y 24 Ø 78 Ø 60 17 23 34 7,5 Ø 63 Cable Blue = neutral Brown = direction of rotation 1 Black = direction of rotation 2 Yellow/ green = earth Orion S Vega Antares Sirius Jupiter Titan Taurus X = motor length (mm) 614 614 659 614 659 659 659 Y = drill distance (mm) 597 597 642 597 642 642 642 Torque (Nm) 55 60 70 80 85 100 120 RPM (rev/ min.) 17 12 17 12 17 12 12 Tensile strength of tube ø 63 mm (kg) 174 190 222 254 270 317 381 Limit switch capacity (rev.) 35 35 35 35 35 35 35 Tolerance <±5 <±5 ±5 <±5 <±5 <±5 <±5 Power (Watt) 320 280 410 320 450 410 450 Voltage (Volt) 230 230 230 230 230 230 230 Current (Ampere) 1.5 1.25 1.9 1.5 2.1 1.9 2.1 Maximum run time (min.) 4 4 4 4 4 4 4 Maximum motor temperature ( C) 150 140 150 150 150 150 150 Minimum tube diameter (mm) 63 x 1.5 63 x 1.5 63 x 1.5 63 x 1.5 63 x 1.5 63 x 1.5 63 x 1.5 Weight (kg) 4.17 3.92 4.59 4.19 4.45 4.68 4.45 Length of the cable (m) 3 3 3 3 3 3 3 Number of cores 4 4 4 4 4 4 4 Diameter of the cores (mm 2) 0.75 0.75 0.75 0.75 0.75 0.75 0.75 Protection class IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 CEBEC-approval l l l l l l l >> Technical data 335

Technical data SLT 50 X Y 24 Ø 74 Ø 47 17 20 25 3,95 Ø 63 Cable Blue = neutral Brown = direction of rotation 1 Black = direction of rotation 2 Yellow/ green = earth SLT 15/ 17 SLT 25/ 17 SLT 35/ 17 SLT 40/ 17 X = motor length (mm) 655 655 675 745 Y = drill distance (mm) 640 640 660 730 Torque (Nm) 15 25 35 40 RPM (rev/ min.) 17 17 17 17 Tensile strength of tube ø 50 mm (kg) 60 100 140 160 Limit switch capacity (rev.) 46 46 46 46 Tolerance <±5 <±5 <±5 <±5 Power (Watt) 140 170 240 270 Voltage (Volt) 230 230 230 230 Current (Ampere) 0.65 0.8 1.1 1.2 Maximum run time (min.) 4 4 4 4 Maximum motor temperature ( C) 150 150 150 140 Minimum tube diameter (mm) 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 Weight (kg) 1.95 2.2 2.55 2.80 Length of the cable (m) 3 3 3 3 Number of cores 4 4 4 4 Diameter of the cable (mm 2 ) 0.75 0.75 0.75 0.75 Protection class IP 44 IP 44 IP 44 IP 44 CEBEC-approval l l l l >> Technical data 336

Technical data SLT 60 X Y 24 Ø 78 Ø 60 17 23 34 7,5 Ø 63 Cable Blue = neutral Brown = direction of rotation 1 Black = direction of rotation 2 Yellow/ green = earth SLT 55/ 17 SLT 70/ 17 SLT 85/ 17 SLT 100/ 12 X = motor length (mm) 734 734 734 734 Y = drill distance (mm) 717 717 717 717 Torque (Nm) 55 70 85 100 RPM (rev/ min.) 17 17 17 12 Tensile strength of tube ø 63 mm (kg) 175 222 270 317 Limit switch capacity (rev.) 35 35 35 35 Tolerance <±5 <±5 ±5 <±5 Power (Watt) 320 410 450 410 Voltage (Volt) 230 230 230 230 Current (Ampere) 1.5 1.9 2.1 1.9 Maximum run time (min.) 4 4 4 4 Maximum motor temperature ( C) 150 150 150 150 Minimum tube diameter (mm) 63 x 1.5 63 x 1.5 63 x 1.5 63 x 1.5 Weight (kg) 4.39 4.82 5.03 4.91 Length of the cable (m) 3 3 3 3 Number of cores 4 4 4 4 Diameter of the cores (mm2 ) 0.75 0.75 0.75 0.75 Protection class IP 44 IP 44 IP 44 IP 44 CEBEC-approval l l l l >> Technical data 337

Technical data LT 50/ CSI X 24 Y 80 Ø47 91 3,95 86 Cable Blue = neutral Brown = direction of rotation 1 Black = direction of rotation 2 Yellow/ green = earth Jet/ CSI Meteor/ CSI Helios/ CSI Mariner/ CSI Vectran/ CSI X = motor length (mm) 544 594 594 664 594 Y = drill distance (mm) 529 579 579 649 579 Torque (Nm) 10 20 30 40 50 RPM (rev/ min.) 17 17 17 17 12 Tensile strength of tube ø 50 mm (kg) 40 80 120 160 200 Limit switch capacity (rev.) 34 34 34 34 34 Tolerance <±5 <±5 ±5 <±5 <±5 Manual control transmission ratio 27:1 27:1 27:1 27:1 27:1 Power (Watt) 120 160 240 270 240 Voltage (Volt) 230 230 230 230 230 Current (Ampere) 0.5 0.75 1.1 1.2 1.1 Maximum run time (min.) 4 4 4 4 4 Maximum motor temperature ( C) 140 150 150 140 150 Minimum tube diameter (mm) 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 Weight (kg) 2.44 2.76 3.09 3.38 3.09 Length of the cable (m) 3 3 3 3 3 Number of cores 4 4 4 4 4 Diameter of the cores (mm 2) 0.75 0.75 0.75 0.75 0.75 Protection class IP 44 IP 44 IP 44 IP 44 IP 44 CEBEC-approval l l l l l >> Technical data 338

Technical data LT 60/ CSI X 24 Y 80 Ø60 91 7,45 86 Cable Blue = neutral Brown = direction of rotation 1 Black = direction of rotation 2 Yellow/ green = earth Vega/ CSI Sirius/ CSI Titan/ CSI Taurus/ CSI Orion S/ CSI Antares/ CSI Jupiter/ CSI X = motor length (mm) 646 646 681 681 646 681 681 Y = drill distance (mm) 630 630 665 665 630 665 665 Torque (Nm) 60 80 100 120 55 70 85 RPM (rev/ min.) 12 12 12 12 17 17 17 Tensile strength of tube ø 63 mm (kg) 190 254 317 381 174 222 270 Limit switch capacity (rev.) 34 34 34 34 34 34 34 Tolerance <±5 <±5 ±5 <±5 <±5 <±5 <±5 Manual control transmission ratio 55:1 55:1 55:1 55:1 55:1 55:1 55:1 Power (Watt) 280 320 410 450 320 410 450 Voltage (Volt) 230 230 230 230 230 230 230 Current (Ampere) 1.25 1.5 1.9 2.1 1.5 1.9 2.1 Maximum run time (min.) 4 4 4 4 4 4 4 Maximum motor temperature ( C) 140 150 150 150 150 150 150 Minimum tube diameter (mm) 63 x 1.5 63 x 1.5 63 x 1.5 63 x 1.5 63 x 1.5 63 x 1.5 63 x 1.5 Weight (kg) 4.67 4.93 5.40 5.56 4.91 5.31 5.52 Length of the cable (m) 3 3 3 3 3 3 3 Number of cores 4 4 4 4 4 4 4 Diameter of the cores (mm 2) 0.75 0.75 0.75 0.75 0.75 0.75 0.75 Protection class IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 CEBEC-approval l l l l l l l >> Technical data 339

Technical data Orea 50 WT X Y Ø 47 17 20 25 3,95 Ø 63 Cable Blue = neutral Brown = direction of rotation 1 Black = direction of rotation 2 Yellow/ green = earth Orea WT 6/ 17 Orea WT 10/ 17 Orea WT 15/ 17 Orea WT 20/ 17 Orea WT 25/ 17 Orea WT 30/ 17 Orea WT 35/ 17 Orea WT 40/ 17 Orea WT 50/ 12 X = motor length (mm) 605 655 655 655 655 675 675 745 675 Y = drill distance (mm) 590 640 640 640 640 660 660 730 660 Torque (Nm) 6 10 15 20 25 30 35 40 50 RPM (rev/ min.) 17 17 17 17 17 17 17 17 12 Tensile strength of tube ø 50 mm (kg) 24 40 60 80 100 120 140 160 200 Limit switch capacity (rev.) 250 250 250 250 250 250 250 250 250 Tolerance <±3 <±3 <±3 <±3 <±3 <±3 <±3 <±3 <±3 Power (Watt) 90 120 140 160 170 240 240 270 240 Voltage (Volt) 230 230 230 230 230 230 230 230 230 Current (Ampere) 0.45 0.5 0.65 0.75 0.8 1.1 1.1 1.2 1.1 Maximum run time (min.) 4 4 4 4 4 4 4 4 4 Maximum motor temperature ( C) 140 140 150 150 150 150 150 140 150 Minimum tube diameter (mm) 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 Weight (kg) 1.72 1.85 1.95 2.15 2.2 2.55 2.55 2.8 2.75 Length of the cable (m) 3 3 3 3 3 3 3 3 3 Number of cores 4 4 4 4 4 4 4 4 4 Diameter of the cores (mm 2) 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 Protection class IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 Minimum/ maximum environment temperature ( C) CEBEC-approval l l l l l l l l l >> Technical data 340

Technical data Orea 60 WT X Y Ø 60 17 23 34 7,5 Ø 63 Cable Blue = neutral Brown = direction of rotation 1 Black = direction of rotation 2 Yellow/ green = earth Orea WT 55/ 17 Orea WT 70/ 17 Orea WT 85/ 17 Orea WT 100/ 12 Orea WT 120/ 12 X = motor length (mm) 734 734 734 734 734 Y = drill distance (mm) 717 717 717 717 717 Torque (Nm) 55 70 85 100 120 RPM (rev/ min.) 17 17 17 12 12 Tensile strength of tube ø 63 mm (kg) 175 222 270 317 381 Limit switch capacity (rev.) 200 200 200 200 200 Tolerance <±3 <±3 <±3 <±3 <±3 Power (Watt) 320 410 450 410 450 Voltage (Volt) 230 230 230 230 230 Current (Ampere) 1.5 1.9 2.1 1.9 2.1 Maximum run time (min.) 4 4 4 4 4 Maximum motor temperature ( C) 150 140 150 150 150 Minimum tube diameter (mm) 63 x 1.5 63 x 1.5 63 x 1.5 63 x 1.5 63 x 1.5 Weight (kg) 4.39 4.82 5.03 4.83 5.03 Length of the cable (m) 3 3 3 3 3 Number of cores 4 4 4 4 4 Diameter of the cores (mm 2) 0.75 0.75 0.75 0.75 0.75 Protection class IP 44 IP 44 IP 44 IP 44 IP 44 Minimum/ maximum environment temperature ( C) CEBEC-approval l l l l l >> Technical data 341

Technical data Oximo 50 WT X Y Ø 47 17 20 25 3,95 Ø 63 Cable Blue = neutral Brown = direction of rotation 1 Black = direction of rotation 2 Yellow/ green = earth Oximo WT 6/ 17 Oximo WT 10/ 17 Oximo WT 15/ 17 Oximo WT 20/ 17 Oximo WT 30/ 17 Oximo WT 40/ 17 X = motor length (mm) 605 655 655 655 675 745 Y = drill distance (mm) 590 640 640 640 660 730 Torque (Nm) 6 10 15 20 30 40 RPM (rev/ min.) 17 17 17 17 17 17 Tensile strength of tube ø 50 mm (kg) 24 40 60 80 120 160 Limit switch capacity (rev.) 250 250 250 250 250 250 Tolerance <±3 <±3 ±3 <±3 <±3 <±3 Power (Watt) 90 120 140 160 240 270 Voltage (Volt) 230 230 230 230 230 230 Current (Ampere) 0.45 0.5 0.65 0.75 1.1 1.2 Maximum run time (min.) 4 4 4 4 4 4 Maximum motor temperature ( C) 140 140 150 150 150 140 Minimum tube diameter (mm) 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 Weight (kg) 1.72 1.85 1.95 2.15 2.55 2.8 Length of the cable (m) 3 3 3 3 3 3 Number of cores 4 4 4 4 4 4 Diameter of the cores (mm 2) 0.75 0.75 0.75 0.75 0.75 0.75 Protection class IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 Minimum/ maximum environment temperature ( C) CEBEC-approval l l l l l l >> Technical data 342

Technical data ILMO 50 WT X Y Ø 47 17 20 25 3,95 Ø 63 Cable Blue = neutral Brown = direction of rotation 1 Black = direction of rotation 2 Yellow/ green = earth Ilmo WT 6/ 17 Ilmo WT 10/ 17 Ilmo WT 15/ 17 Ilmo WT 20/ 17 Ilmo WT 30/ 17 Ilmo WT 35/ 17 X = motor length (mm) 505 505 525 655 675 675 Y = drill distance (mm) 490 490 510 640 660 660 Torque (Nm) 6 10 15 20 30 35 RPM (rev/ min.) 17 17 17 17 17 17 Tensile strength of tube ø 50 mm (kg) 24 40 60 80 120 140 Limit switch capacity (rev.) n.v.t. n.v.t. n.v.t. n.v.t. n.v.t. n.v.t. Tolerance <±3 <±3 ±3 ±5 ±5 ±5 Power (Watt) 90 120 140 160 240 240 Voltage (Volt) 230 230 230 230 230 230 Current (Ampere) 0.4 0.5 0.65 0.75 1.1 1.1 Maximum run time (min.) 4 4 4 4 4 4 Maximum motor temperature ( C) 140 140 150 150 150 150 Minimum tube diameter (mm) 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 Weight (kg) 1.72 1.85 1.95 2.15 2.55 2.55 Length of the cable (m) 3 3 3 3 3 3 Number of cores 4 4 4 4 4 4 Diameter of the cores (mm 2) 0.75 0.75 0.75 0.75 0.75 0.75 Protection class IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 Minimum/ maximum environment temperature ( C) CEBEC-approval l l l l l l >> Technical data 343

Technical data ILMO S 50 WT X Y Ø 47 17 20 25 3,95 Ø 63 Ilmo S module is always supplied Cable Blue = neutral Brown = direction of rotation 1 Black = direction of rotation 2 Yellow/ green = earth Ilmo 6/ 17 S WT X = motor length (mm) 355 Y = drill distance (mm) - Torque (Nm) 6 RPM (rev/ min.) 17 Tensile strength of tube ø 50 mm (kg) 24 Limit switch capacity (rev.) n.v.t. Tolerance <±3 Power (Watt) 90 Voltage (Volt) 230 Current (Ampere) 0.45 Maximum run time (min.) 4 Maximum motor temperature ( C) 140 Minimum tube diameter (mm) 50 x 1.5 Weight (kg) 1.25 Length of the cable (m) 3 Number of cores 4 Diameter of the cores (mm 2) 0.75 Protection class IP 44 Minimum/ maximum environment temperature ( C) CEBEC-approval l >> Technical data 344

Technical data ILMO 40 WT CLASS II = no earth wire 13,5 X Y 29 Ø 12 Ø 38 Ø 36 60 Cable Blue = neutral Brown = direction of rotation 1 Black = direction of rotation 2 Yellow/ green = earth Ilmo 40 4/ 14 WT Ilmo 40 9/ 14 WT Ilmo 40 13/ 8 WT X = motor length (mm) - - - Y = drill distance (mm) - - - Torque (Nm) 4 9 13 RPM (rev/ min.) 14 14 8 Tensile strength of tube ø 40 mm (kg) 20 45 65 Limit switch capacity (rev.) n.v.t. n.v.t. n.v.t. Tolerance <±3 <±3 ±3 Power (Watt) - - - Voltage (Volt) 230 230 230 Current (Ampere) - - - Maximum run time (min.) 4 4 4 Maximum motor temperature ( C) - - - Minimum tube diameter (mm) 40 x 1.5 40 x 1.5 40 x 1.5 Weight (kg) - - - Length of the cable (m) - - - Number of cores 4 4 4 Diameter of the cores (mm 2) 0.75 0.75 0.75 Protection class IP 44 IP 44 IP 44 Minimum/ maximum environment temperature ( C) CEBEC-approval l l l >> Technical data 345

Technical data Solus PA X Y Ø 47 17 20 25 3,95 Ø 63 Cable Blue = neutral Brown = direction of rotation 1 Black = direction of rotation 2 Yellow/ green = earth Solus PA 10/ 12 Solus PA 20/ 12 Solus PA 30/ 12 Solus PA 40/ 12 X = motor length (mm) 505 525 555 605 Y = drill distance (mm) 490 510 540 590 Torque (Nm) 10 20 30 40 RPM (rev/ min.) 12 12 12 12 Tensile strength of tube ø 50 mm (kg) 40 80 120 160 Limit switch capacity (rev.) 29 29 29 29 Tolerance <±8 <±8 ±8 <±8 Power (Watt) 90 140 160 240 Voltage (Volt) 230 230 230 230 Current (Ampere) 0.45 0.65 0.75 1.1 Maximum run time (min.) 4 4 4 4 Maximum motor temperature ( C) 140 150 150 150 Minimum tube diameter (mm) 50 x 1.5 50 x 1.5 50 x 1.5 50 x 1.5 Weight (kg) 1.66 2.05 2.17 2.49 Length of the cable (m) 2.5 2.5 2.5 2.5 Number of cores 4 4 4 4 Diameter of the cores (mm 2) 0.75 0.75 0.75 0.75 Protection class IP 44 IP 44 IP 44 IP 44 Min./ max. environmental temperature ( C) -20/ -20/ -20/ -20/ CEBEC-approval l l l l >> Technical data 346

347