Made In The USA Performance Products Quality AfterMarket Parts Since 1972 Performance Headers Performance Exhaust Systems Exhaust System Components
Made in the USA At PaceSetter, we make and warranty what we sell! PaceSetter is proud that our products are not only designed by us, but they are manufactured in our Phoenix, Arizona, plant. That gives us total control to insure that you get the best made, most affordable performance products available. Table of Contents Performance Headers for Cars American Muscle Headers and Exhaust Mustang Performance Exhaust 1-7/8 Diameter Long Tube Performance Headers Corvette Performance Exhaust Camaro Performance Exhaust Performance Headers for Trucks Long Tube Headers for Trucks Shorty and MidTube Headers for Trucks TFX Performance Exhaust Systems for Jeeps and Trucks MONZA Performance Exhaust Systems Direct-Fit Catalytic Converters MONZA Premium Exhaust Tips Performance for Jeeps Performance Exhaust Components Warranty 3-6 7 8 9 10 11 12-15 16-17 18 19 20-21 22-23 24 25 26-27 Outside Back Cover
HEADERS For Cars 3 PaceSetter Performance Headers For Sport Compact, Domestic, and American Muscle Manufactured using mandrel-bent, 16-gauge mild steel tubing and port-matched, CNC-machined, 3/8 -thick head flanges. They are designed for the best combination of ease of installation, fit and maximum performance gain for your vehicle. PaceSetter Performance Headers come with gaskets, hardware and installation instructions and are backed by a three year warranty. Refer to the warranty elsewhere in this catalog. PaceSetter Performance Headers are available with a standard black paint finish or optional, a a polished, 20000 F metallic ceramic coating. won't discolor like paint, chrome or even stainless steel, reduces underhood temperatures, helps the header resist rust and corrosion and is easy to keep clean. The coating itself is guaranteed not to chip, peel or flake for three years. Collector Design Notes Gasket Black Paint Part No. ARMOR *Coat ACURA Integra 86-87 1.6L 1-5/8 2 1, 3, 6, 11 G7261 70-1260 72C1260 Integra 94-00 1.8L (non-vtec) 1-5/8 2 1, 3, 6, 11 G7265 70-1265 72C1265 AUSTIN HEALY Sprite 58-71 1.0, 1.1, 1.3L 1-3/8 2 2, 4, 6 G7042 70-1042 72C1042 BUICK GS 97-03 3.8L Supercharged 1-3/4 2-1/2 1, 3, 6 G7209 70-1205 72C1205 CHEVROLET Camaro 85-89 2.8L 1-1/2 2-1/4 1, 3, 6, 11 G7208 70-1206 72C1206 Camaro, w/o air inj. 93-95 3.4L 1-1/2 2-1/4 1, 3, 6, 11 G7208 70-1208 72C1208 Camaro 95-02 3.8L 1-1/2 2-1/2 1, 3, 6, 11 G7209 70-1209 72C1209 Camaro 85-14 Also see pages 7, 9 & 11 Camaro 94-95 5.7L LT1 1-5/8 2-1/2 1, 3, 6, 11, 15 G2239 70-1335 72C1335 Camaro 96-97 5.7L LT1 1-5/8 2-1/2 1, 3, 6, 11, 15 G2239 70-1337 72C1337 Camaro 10-14 L99, LS3 6.2L 1-3/4 3 1, 3, 12, 14, 15 G1341 70-1350 72C1350 1 Flanged Collector 2 Slip-fit Collector 3 Hook ups for smog and engine management sensors where required 4 No smog or engine management hook ups. O2 sensor fittings when required. 5 Comes with collector reducer. Fabrication required to connect to stock system 6 Comes with extensions to connect to stock system. Fabrication may be required. 7 Fits cylinder head with evenly-spaced ports 8 Fits cylinder head with paired ports 9 Catalytic converter must be relocated 11 50-States legal 12 Replaces stock exhaust manifold. Bolts to stock down pipe 13 Long tube header 14 Shorty header. 15 Retains catalytic converter in stock location 16 Y-pipe available to connect to stock system 17 X-pipe available to connect to stock system 18 H-pipe available to connect to stock system 19 Extensions available to hook to stock system 30 Includes catalytic converters Made In The USA Not legal for use on catalyst-equipped vehicles except for racing vehicles which may not be operated on a highway except headers with Design Note #11. Pre-catalyst vehicles must use original emission control devices. It is the responsibility of the customer to reinstall these devices on the vehicle. 72C1042 Sprite Midget 70-1265 Integra 72C1350 Camaro
4 HEADERS For Cars Collector Design Notes Gasket Black Paint Part No. ARMOR *Coat CHEVROLET Cavalier, Malibu 02-05 2.2L Ecotec 1-1/2 3 1, 3, 6, 11 G4002 70-1279 72C1279 Cobalt 05-06 2.2L Ecotec 1-1/2 3 1, 3, 6 G4002 70-1272 72C1272 Cobalt SS 05-06 2.0L Supercharged 1-3/4 3 1, 3, 6, 11 G4002 70-1273 72C1273 Corvette 92-96 5.7L 1-5/8 2-1/2 1, 3, 11, 12, 14 G2239 70-1340 72C1340 Corvette 97-13 See Page 10 DODGE Neon 95-05 2.0L SOHC 1-1/2 3 1, 3, 6, 11 G7215 70-1215 72C1215 EAGLE Talon 89-94 2.0L DOHC 1-5/8 2 1, 3, 6, 11 G7222 70-1222 72C1222 Talon 89-99 2.0L 4G63 Turbo 1-5/8 2-1/4 1, 3, 11 G7222 70-1225 72C1225 FORD Escort ZX2 97-03 2.0L 1-1/2 2-1/2 1, 3 G7169 70-1168 72C1168 Focus ZX3 00-03 2.0L 1-1/2 2-1/2 1, 3 G7169 70-1169 72C1169 Mustang 86-93 5.0L, shorty 1-5/8 3 1, 3, 11,12,14 G7322 70-1067 72C1067 Mustang 01-04 3.8L V6 1-5/8 2-1/2 1, 3, 12, 14 G7077 70-1077 72C1077 Mustang 05-10 4.0L 1-5/8 2-1/2 1, 3, 12, 14 G7387 70-1073 72C1073 Mustang GT 94-95 5.0L, shorty 1-5/8 2-1/2 1, 3, 11, 12, 14 G7322 70-1075 72C1075 Mustang GT 05-10 4.6L 1-5/8 3 1, 3, 12, 14 G7328 70-1074 72C1074 Mustang Additional Mustang Performance Systems on pages 7 & 8 Pinto 74-80 2.3L 1-1/2 2-1/2 1, 3, 5 G7051 70-1064 72C1064 HONDA Accord 90-93 2.2L 1-1/2 2 1, 3, 6, 11 G7243 70-1251 72C1251 Accord 2003 2.4L 1-5/8 2 1, 3, 6 G7255 70-1255 72C1255 Civic EX 92-00 1.6L VTec 1-5/8 2-1/4 1, 3, 6, 11 G7146 70-1160 72C1160 Prelude S 92-95 2.2L, F22A1 1-5/8 2-1/4 1, 3, 6, 11 G7243 70-1243 72C1243 Prelude 88-89 2.0L 1-5/8 2 1, 3, 6, 11 G7148 70-1241 72C1241 MAZDA RX-7(exc. conv.) 84-92 1.3L/13B 2 2-1/2 1, 3 G7152 70-1152 72C1152 RX-7(exc. conv.) 79-85 1.1/1.3L/12A 2 2-1/2 1, 4, 9 G7070 70-1070 72C1070 1 Flanged Collector 2 Slip-fit Collector 3 Hook ups for smog and engine management sensors where required 4 No smog or engine management hook ups. O2 sensor fittings when required. 5 Comes with collector reducer. Fabrication required to connect to stock system 6 Comes with extensions to connect to stock system. Fabrication may be required. 7 Fits cylinder head with evenly-spaced ports 8 Fits cylinder head with paired ports 9 Catalytic converter must be relocated 11 50-States legal 12 Replaces stock exhaust manifold. Bolts to stock down pipe 13 Long tube header 14 Shorty header. 15 Retains catalytic converter in stock location 16 Y-pipe available to connect to stock system 17 X-pipe available to connect to stock system 18 H-pipe available to connect to stock system 19 Extensions available to hook to stock system 30 Includes catalytic converters 31 May require some fabrication to fit Cooper Made In The USA Not legal for use on catalyst-equipped vehicles except for racing vehicles which may not be operated on a highway except headers with Design Note #11. Pre-catalyst vehicles must use original emission control devices. It is the responsibility of the customer to reinstall these devices on the vehicle. 72C1231 Cooper Cooper S NEW! 72C1340 Corvette 70-1073 Mustang
HEADERS For Cars 5 Collector Design Notes Gasket Black Paint Part No. ARMOR *Coat MERCURY Capri II 75-77 2.3L 1-1/2 2-1/2 1, 3, 5 G7051 70-1064 72C1064 MINI Cooper, Cooper S NEW! 02-08 1.6L 1-1/2 2-1/2 1, 3, 6, 31 G7410 70-1231 72C1231 MG MGB 62-80 1.8L 1-1/2 2 2, 4, 6 G7044 70-1044 72C1044 Midget 58-75 1.0,1.1,1.3L 1-3/8 2 2, 4, 6 G7042 70-1042 72C1042 Midget 76-80 1.5L 1-1/4 2 2, 4, 6 G7084 70-1046 72C1046 MITSUBISHI Eclipse 89-94 2.0L DOHC 1-5/8 2-1/2 1, 3, 6, 11 G7222 70-1222 72C1222 Eclipse FWD/AWD 89-99 2.0L 4G63 Turbo 1-5/8 2-1/4 1, 3, 11 G7222 70-1225 72C1225 NISSAN / DATSUN 240Z/260Z/280Z 70-76 L24, L26, L28E 1-5/8 2 2, 4, 6 G7037 70-1037 72C1037 240SX 89-90 2.4L SOHC 1-1/2 2-1/2 1, 3, 6 G7194 70-1286 72C1286 240SX 91-96 2.4L, KA24DE 1-1/2 2-1/2 1, 3, 6 G7288 70-1288 72C1288 280Z, ZX 77-83 L28E Rd Port 1-5/8 2 2, 3, 6 G7102 70-1122 72C1122 300ZX 84-89 VG30E 1-1/2 2 1, 3, 6 G7142 70-1142 72C1142 & G7175 OLDSMOBILE Alero 02-05 2.2L Ecotec 1-1/2 3 1, 3, 6, 11 G7279 70-1279 72C1279 PONTIAC Firebird 85-90 2.8L V6 1-1/2 2-1/4 1, 3, 6, 11, 15 G7208 70-1206 72C1206 Firebird 93-95 3.4L V6 1-1/2 2-1/4 1, 3, 6, 11, 15 G7208 70-1208 72C1208 Firebird 94-95 5.7L LT1 1-5/8 2-1/2 1, 3, 6, 11, 15 G2239 70-1335 72C1335 Firebird 95-02 3.8L V6 1-1/2 2-1/2 1, 3, 6, 11, 15 G7209 70-1209 72C1209 Firebird 96-97 5.7L LT1 1-5/8 2-1/2 1, 3, 6, 11, 15 G2239 70-1337 72C1337 Firebird Long Tube Headers for Pontiac Firebird on pages 7, 9 & 11 Grand Am 02-04 2.2L Ecotec 1-1/2 3 1, 3, 6, 11 G4002 70-1279 72C1279 Grand Prix GTP 97-04 3.8L Supercharged 1-3/4 2-1/2 1, 3, 6 G7209 70-1205 72C1205 1 Flanged Collector 2 Slip-fit Collector 3 Hook ups for smog and engine management sensors where required 4 No smog or engine management hook ups. O2 sensor fittings when required. 5 Sunfire Comes with collector reducer. Fabrication required to connect to stock system 6 Comes with extensions to connect to stock system. Fabrication may be required. 7 Fits cylinder head with evenly-spaced ports 8 Fits cylinder head with paired ports 9 Catalytic converter must be relocated 11 50-States legal 12 Replaces stock exhaust manifold. Bolts to stock down pipe 13 Long tube header 14 Shorty header. 15 Retains catalytic converter in stock location 16 Y-pipe available to connect to stock system 17 X-pipe available to connect to stock system 18 H-pipe available to connect to stock system 19 Extensions available to hook to stock system 30 Includes catalytic converters 31 May require some fabrication to fit Cooper Made In The USA Not legal for use on catalyst-equipped vehicles except for racing vehicles which may not be operated on a highway except headers with Design Note #11. Pre-catalyst vehicles must use original emission control devices. It is the responsibility of the customer to reinstall these devices on the vehicle. 72C1037 240 260 280Z 240SX 70-1288 70-1044 MGB
6 HEADERS For Cars Collector Design Notes Gasket Black Paint Part No. ARMOR *Coat PONTIAC Sunfire 02-05 2.2L Ecotec 1-1/2 3 1, 3, 6, 11 G4002 70-1279 72C1279 PLYMOUTH Laser 89-94 2.0L DOHC 1-5/8 2-1/2 1, 3, 6, 11 G7222 70-1222 72C1222 Laser 95-99 2.0L 4G63 Turbo 1-5/8 2-1/4 1, 3, 11 G7222 70-1225 72C1225 SATURN ION 05-06 2.2L Ecotec 1-1/2 3 1, 3, 6 G4002 70-1272 72C1272 Redline 04-06 2.0L Supercharged 1-3/4 3 1, 3, 6, 11 G4002 70-1273 72C1273 SC2 Coupe, SL2 94-96 1.9L Twin Cam 1-5/8 2 1, 3, 6 G7270 70-1270 72C1270 SUZUKI Samurai 86-93 1.3L 1-3/8 2-1/2 1, 3, 5 G7115 70-1115 72C1115 TOYOTA Celica 75-81 2.2L / 20R 1-1/2 2-1/2 1, 3, 5 G7072 70-1072 72C1072 Corolla FWD 86-92 1.6L/4AF,4AFE 1-3/8 2 1, 3, 6 G7153 70-1153 72C1153 Corolla 74-82 1.8L/3TC 1-1/2 2-1/2 1, 4, 5 G7074 70-1078 72C1078 Supra 82-85 2.8L/5MGE 1-1/2 2 2, 3, 6 G7110 70-1110 72C1110 Supra 86-92 3.0L/7MGE 1-1/2 2 2, 3, 6 G7110 70-1157 72C1157 TRIUMPH Spitfire 67-74 1.3L 1-1/4 2 2, 4, 6 G7084 70-1084 72C1084 Spitfire 75-80 1.5L 1-1/4 2 2, 3, 6 G7084 70-1090 72C1090 TR-6 73-75 2.5L 1-1/4 2-1/2 2, 4, 6 G7085 70-1085 72C1085 TR250 72-76 2.5L 1-1/4 2-1/2 2, 4, 5 G7085 70-1085 72C1085 VOLKSWAGEN Cabriolet 85-89 1.8L 1-3/8 2-1/4 1, 3, 6 G7101 70-1099 72C1099 Golf II, III 88-92 1.8, 2.0L 8V 1-3/8 2-1/4 1, 3, 6 G7101 70-1101 72C1101 Jetta 1984 1.8L 1-3/8 2 1, 3, 6 G7101 70-1099 72C1099 Jetta II, III 86-92 1.8L, 8V 1-3/8 2-1/4 1, 3, 6 G7101 70-1101 72C1101 Jetta III, Golf II 93-99 2.0L 1-1/2 2-1/2 1, 3, 6 G7101 70-1102 72C1102 Rabbit/GTI 75-83 1.6, 1.8L 1-3/8 2 1, 3, 6 G7101 70-1099 72C1099 Scirocco 75-88 1.6, 1.8L/8-V 1-3/8 2 1, 3, 6 G7101 70-1099 72C1099 1 Flanged Collector 2 Slip-fit Collector 3 Hook ups for smog and engine management sensors where required 4 No smog or engine management hook ups. O2 sensor fittings when required 5.Comes with collec reducer. Fabrication required to connect to stock system 6 Comes with extensions to connect to stock system. Fabrication may be required. 7 Fits cylinder head with evenly-spaced ports 8 Fits cylinder head with paired ports 9 Catalytic converter must be relocated 11 50-States legal 12 Replaces stock exhaust manifold. Bolts to stock down pipe 13 Long tube header 14 Shorty header. 15 Retains catalytic converter in stock location 16 Y-pipe available to connect to stock system 17 X-pipe available to connect to stock system 18 H-pipe available to connect to stock system 19 Extensions available to hook to stock system 30 Includes catalytic converters Made In The USA 72C1085 Triumph TR6 72C1115 Samurai 72C1078 Corolla Not legal for use on catalyst-equipped vehicles except for racing vehicles which may not be operated on a highway except headers with Design Note #11. Pre-catalyst vehicles must use original emission control devices. It is the responsibility of the customer to reinstall these devices on the vehicle.
American Muscle 7 Long Tube Headers for Late Model Muscle Cars Camaro Firebird Mustang GTO G8 CTS-V Challenger Charger Magnum 300C Quality manufactured and affordably priced, PaceSetter Long Tube Primaries are sequenced into the collector for the best cylinder Headers will wake up your late model muscle car without damaging scavenging. your wallet! One-piece design means easier installation. Complete with necessary gaskets and fasteners (including header bolts). CNC-machined, 3/8 -thick flanges are matched to the exhaust port profile for optimum seal and flow. Optional 20000 metallic ceramic coating improves Flash-controlled 16-gauge carbon steel primaries provide greater header performance and durability. durability than 18-gauge or more brittle stainless steel. Off Road H- and X-pipes and extensions (some with high flow catalytic converters) are available to connect Long Tube Headers to the Length and diameter of mandrel-bent primaries is optimized for fit, ease of installation and best performance increase. stock or stock replacement exhaust system. See listings. Collector Design Notes Y-, H-, X-Pipe Gasket Header Part No. Black Paint ARMOR *Coat CHEVROLET Camaro 93-97 5.7L LT1 1-3/4 3 2, 4, 9, 13, 16 82-1161 G2239 70-2239 72C2239 Camaro 94-95 5.7L LT1 1-3/4 3 2, 3, 9, 13, 16 82-1161 G2239 70-2235 72C2235 Camaro 96-97 5.7L LT1 1-3/4 3 2, 3, 9, 13, 16 82-1161 G2239 70-2237 72C2237 Camaro 98-99 5.7L LS1 1-3/4 3 2, 3, 9, 13, 16 82-1163 G1341 70-2253 72C2253 Camaro 98-02 5.7L LS1 1-3/4 3 2, 4, 9, 13, 16 82-1163 G1341 70-2256 72C2256 Camaro 00-02 5.7L LS1 1-3/4 3 2, 3, 9, 13, 16 82-1163 G1341 70-2255 72C2255 Camaro 10-14 6.2L L99, LS6 1-3/4 3 2, 4, 9, 13, 19 82-1162, 82-1164(30) G1341 70-2257 72C2257 Camaro 10-11 3.6L V6 1-5/8 3 2, 4, 9, 13, 19 82-1166, 82-1169(30) G1341 70-2232 72C2232 PONTIAC Headers with 1-7/8 Primaries for GM Cars and Trucks on page 9 Firebird 93-97 5.7L LT1 1-3/4 3 2, 4, 9, 13, 16 82-1161 G2239 70-2239 72C2239 Firebird 94-95 5.7L LT1 1-3/4 3 2, 3, 9, 13, 16 82-1161 G2239 70-2235 72C2235 Firebird 96-97 5.7L LT1 1-3/4 3 2, 3, 9, 13, 16 82-1161 G2239 70-2237 72C2237 Firebird 98-99 5.7L LS1 1-3/4 3 2, 3, 9, 13, 16 82-1163 G1341 70-2253 72C2253 Firebird 98-02 5.7L LS1 1-3/4 3 2, 4, 9, 13, 16 82-1163 G1341 70-2256 72C2256 Firebird 00-02 5.7L LS1 1-3/4 3 2, 3, 9, 13, 16 82-1163 G1341 70-2255 72C2255 GTO 04-06 5.7L / 6.0L 1-3/4 3 2, 4, 9, 13, 19 82-1165, 82-1167 G1341 70-2258 72C2258 G8 08-09 6.0L / 6.2L 1-3/4 3 2, 4, 9, 13, 19 82-1168 (exc. 6.2L) G1341 70-2259 72C2259 CADILLAC CTS-V 04-07 5.7L / 6.0L 1-3/4 3 2, 4, 9, 13, 19 82-1170 G1341 70-2272 72C2272 DODGE / CHRYSLER Challenger 09-10 5.7L 1-3/4 3 2, 4, 9, 13, 19 82-1132 G7210L(1) 70-2242 72C2242 G7210R(1) Charger 06-08 5.7L 1-3/4 3 2, 4, 9, 13, 19 82-1132 G7210L(1) 70-2242 72C2242 G7210R(1) Magnum 05-08 5.7L 1-3/4 3 2, 4, 9, 13, 19 82-1132 G7210L(1) 70-2242 72C2242 G7210R(1) 300C 05-08 5.7L 1-3/4 3 2, 4, 9, 13, 19 82-1132 G7210L(1) 70-2242 72C2242 G7210R(1) FORD Mustang 89-93 5.0L 1-5/8 2-1/2 1, 4, 9, 13, 18 82-1111 G7322 70-3226 72C3226 Mustang 94-04 3.8L 1-5/8 2-1/2 2, 4, 9, 13, 17 82-1126 G7077 70-3220 72C3220 Mustang 94-95 5.0L 1-5/8 2-1/2 2, 4, 9, 13, 17 82-1143 G7322 70-3227 72C3227 Mustang 94-97 3.8L w/egr 1-5/8 2-1/2 2, 3, 9, 13, 17 82-1126 G7077 70-3221 72C3221 Mustang 96-04 4.6L 2V 1-5/8 3 2, 3, 9, 13, 17 82-1146 G7326 70-3230 72C3230 Mustang 96-04 4.6L 4V 1-5/8 3 2, 3, 9, 13, 17 82-1146 G3229 70-3229 72C3229 Mustang 01-04 3.8L w/egr 1-5/8 2-1/2 2, 3, 9, 13, 17 82-1126 G7077 70-3221 72C3221 Mustang 05-10 4.6L 1-3/4 3 2, 4, 9, 13, 18 82-1122, 82-1123(30) G7328 70-3232 72C3232 Mustang 05-10 4.0L 1-5/8 2-1/2 2, 3, 9, 13, 16 82-1128 G7387 70-3236 72c3236 1 Flanged Collector 2 Slip-fit Collector 3 Hook ups for smog and engine management sensors where required 4 No smog or engine management hook ups. O2 sensor fittings when required. 5 Comes with collector reducer. Fabrication required to connect to stock system 6 Comes with extensions to connect to stock system. Fabrication may be required. 7 Fits cylinder head with evenly-spaced ports 8 Fits cylinder head with paired ports 9 Catalytic converter must be relocated 11 50-States legal 12 Replaces stock exhaust manifold. Bolts to stock down pipe 13 Long tube header 14 Shorty header. Made 15 Retains catalytic converter in stock location In The 16 Y-pipe available to connect to stock system USA 17 X-pipe available to connect to stock system 18 H-pipe available to connect to stock system 19 Extensions available to hook to stock system 30 Includes catalytic converters
8 MUSTANG Performance Exhaust Systems Mustang Off Road H Pipes 2-1/2 16-gauge aluminized tubing. Mandrel-bent. Fits stock manifolds or shorty headers Works with manual and auto trans For racing use only. Year Model Part No. 86-93 5.0L GT/LX 82-1110 96-98 4.6L GT (man. Trans.) 82-1114 99-04 4.6L GT 82-1117 05-10 4.6L GT 82-1118 05-10 4.6L GT 82-1122 (Off Road H-pipe, use with 70-3232 long tube headers) 05-10 4.6L GT 82-1123 (Off Road H-pipe with catalytic converters for long tube headers) Mustang Off Road X Pipes Cross-over pipes deliver more power and a more powerful sound from your Mustang 5.0L or 4.6L. Cross-over design helps exhaust pulses scavenge each cylinder. Pacesetter Cross-Over Off-Road pipes are mandrel-bent from 2-1/2 -diameter, 16-gauge aluminized tubing. Each fits 5-speed and automatic transmission applications. Year Model Part No. 86-93 * 5.0GT / LX 82-1140 94-95 * 5.0L GT 82-1142 96-04 4.6L GT (Use w/70-3229/70-3230) 82-1146 05-10 * 4.6L GT 82-1149 *Fits Stock Manifolds/Shorty Headers 3.8L Mustang Cat-Back Adapter Kit Get 10-12% more power from your V6. Kit adapts V8 Cat-Back system (see below) to 94-and later Mustang with 3.8L V6. Retains stock catalytic converters. 50-states legal. Contains adapter H-pipe, clamps, fasteners, hangers, and instructions. Cutting required. Welding recommended but not necessary. Year 94-98 99-04 Part No. 82-2920 82-2921 X-, H-Pipes, Extensions for Late Model Muscle Cars Especially for Long Tube Headers. Mandrel-bent aluminized tubing. Slips over header collector, connects to exhaust system. Some models with catalytic converters. Mustang GT 82-1123 82-1164 2010 Camaro V8 82-1162
1-7/8 HEADERS 9 1-7/8 Diameter Long Tube Headers 1-7/8" Diameter Primary Tubes 3 Diameter Y-Pipe Also Available New Applications Being Added Mandrel-Bent 16 Gauge Mild Steel Tubes Enter Collector In Proper Firing Sequence For Maximum Scavenging Available In Black Paint Or Finish Not Legal For Use On Catalyst-Equipped Vehicles Made In The USA 72C2269 Escalade, Avalanche, Silverado Sierra, Suburban, Yukon, Tahoe 70-2252 Camaro Firebird 72C2250 Camaro Collector Off Road Y-Pipe Header Part No. Paint CADILLAC Escalade 07-14 6.2L 1-7/8 3 82-1177 70-2269 72C2269 CHEVROLET/GMC Avalanche 07-12 5.3/6.0L 1-7/8 3 82-1177 70-2269 72C2269 Avalanche 02-06 5.3L 1-7/8 3 82-1176 70-2266 72C2266 Camaro 10-14 6.2L 1-7/8 3 82-1162 70-2250 72C2250 Camaro 98-02 5.7L 1-7/8 3 82-1160 70-2252 72C2252 Corvette NEW! 05-13 6.0/6.2L 1-7/8 3 82-1226 70-2374 72C2374 Corvette NEW! 97-04 5.7L 1-7/8 3 82-1208 70-2370 72C2370 Silverado, Sierra 14-15 5.3/6.2L 1-7/8 3 82-1178 70-2268 72C2268 Silverado, Sierra 03-13 4.8/5.3/6.0/6.2L 1-7/8 3 82-1177 70-2269 72C2269 Silverado, Sierra 99-06 4.8/5.3L 1-7/8 3 82-1176 70-2266 72C2266 Suburban, Tahoe, Yukon 2015 5.3/6.0L 1-7/8 3 82-1178 70-2268 72C2268 Suburban, Yukon 07-14 5.3/6.0L 1-7/8 3 82-1177 70-2269 72C2269 Suburban, Tahoe 00-06 4.8/5.3/6.0L 1-7/8 3 82-1176 70-2266 72C2266 Tahoe 07-14 4.8/5.3/6.0L 1-7/8 3 82-1177 70-2269 72C2269 Yukon 00-06 4.8/5.3/5.7/6.0L 1-7/8 3 82-1176 70-2266 72C2266 PONTIAC Firebird 98-02 5.7L 1-7/8 3 82-1160 70-2252 72C2252 Not legal for sale or use in California or on catalyst-equipped vehicles
10 CORVETTE Performance Exhaust Systems NEW! Corvette Long Tube Headers and Exhaust Quality-made, affordably priced long tube headers and exhaust system components for your C5 or C6 Corvette! Length and diameter of header primary tubes are optimized for best performance gain and ease of installation Header extensions to hook headers to PaceSetter X-pipe are included, as noted Optional catted extensions feature PaceSetter's highflow MetalCore catalytic converters Make/ Year Engine Collector Design Extensions Extensions Part # Gasket Model Notes w/o Cats w/ Cats Black ARMOR* Coat C5 97-04 5.7L 1-7/8" 3" 2, 3, 5, 13, 19 G1341 Included 82-1218 70-2370 72C2370 C5 97-04 5.7L 1-3/4" 3" 2, 3, 5, 13, 19 G1341 N/A N/A 70-2371 72C2371 C6, Z06 05-13 6.0/6.2L 1-7/8" 3" 2, 4, 5, 13, 19 G1341 Included 82-1218 70-2374 72C2374 Not available for sale or use in California or on catalyst-equipped vehicles 3" Diameter X-Pipes with Extensions to mate to stock or stock replacment muffler sections Mandrel-bent 16-gauge 3" diameter aluminized steel tubing resists corrosion Band Clamps included for easy installation Fits Rear Muffler Section Part # C5 97-04 5.7L 3" 2-1/2" w/ flange 82-1208 C6 05-08 6.0/6.2L 3" 2-1/2" 82-1226 C6, Z06 05-13 6.0/6.2L 3" 3" 82-1234 82-1234 C6, Z06 72C2370 C5
CAMARO Performance Exhaust Systems 11 American-Made for THE American Car From the leader in the design, manufacture and distribution of affordably priced, quality made performance exhaust products. You can have increased performance in your V6 or V8 Camaro or Firebird at prices that are down to earth, leaving more money for more improvements to your vehicle! Long Tube PaceSetter Headers 72C2250 L99, LS6, 6.2L 3/8 thick CNC-machined, port matched steel flanges 1-7/8 or 1-3/4 16-gauge mild steel, mandrel-bent primaries 3 high volume collector Most available with fittings for air injection and EGR Optional available Complete with header bolts, gaskets and hardware for installation Y-pipes available to connect to stock or replacement system Off road applications only. Header Part No. Collector Design Y-, H-, X-Pipe Gasket Notes Black ARMOR Paint *Coat Camaro 10-14 6.2L 1-7/8 3 2, 3, 9, 13, 19 82-1162 G1341 70-2250 72C2250 Camaro 98-02 5.7 LT1 1-7/8 3 2, 9, 13, 16 82-1160 G1341 70-2252 72C2252 Camaro 93-97 5.7L LT1 1-3/4 3 2, 4, 9, 13, 16 82-1161 G2239 70-2239 72C2239 Camaro 94-95 5.7L LT1 1-3/4 3 2, 3, 9, 13, 16 82-1161 G2239 70-2235 72C2235 Camaro 96-97 5.7L LT1 1-3/4 3 2, 3, 9, 13, 16 82-1161 G2239 70-2237 72C2237 Camaro 98-99 5.7L LS1 1-3/4 3 2, 3, 9, 13, 16 82-1163 G1341 70-2253 72C2253 Camaro 98-02 5.7L LS1 1-3/4 3 2, 4, 9, 13, 16 82-1163 G1341 70-2256 72C2256 Camaro 00-02 5.7L LS1 1-3/4 3 2, 3, 9, 13, 16 82-1163 G1341 70-2255 72C2255 Camaro 10-14 6.2L L99, LS6 1-3/4 3 2, 4, 9, 13, 19 82-1162, 82-1164(30) G1341 70-2257 72C2257 Camaro 10-11 3.6L V6 1-5/8 3 2, 4, 9, 13, 19 82-1166, 82-1169(30) G1341 70-2232 72C2232 Mid Tube and Shorty PaceSetter Performance Headers Machined flanges and 16-gauge primaries, just like race long tubes Pollution control hook ups Retains catalytic converter in stock location Optional available Complete with header bolts, gaskets and all hard-ware for installation 50-states legal where noted. 72C1350 L99, LS3, 6.2L Collector Design Notes Gasket Header Part No. Black Paint ARMOR *Coat Camaro 85-89 2.8L 1-1/2 2-1/4 1, 3, 6, 11 G7208 70-1206 72C1206 Camaro, w/o air inj. 93-95 3.4L 1-1/2 2-1/4 1, 3, 6, 11 G7208 70-1208 72C1208 Camaro 95-02 3.8L 1-1/2 2-1/2 1, 3, 6, 11 G7209 70-1209 72C1209 Camaro 94-95 5.7L LT1 1-5/8 2-1/2 1, 3, 6, 11, 15 G2239 70-1335 72C1335 Camaro 96-97 5.7L LT1 1-5/8 2-1/2 1, 3, 6, 11, 15 G2239 70-1337 72C1337 Camaro 10-14 L99, LS3 6.2L 1-3/4 3 1, 3, 12, 14, 15 G1341 70-1350 72C1350 O2 Sensor Harness Extension for 98-02 LS1 Applications 18 length with male and female connectors Part # 062253
12 TRUCK HEADERS PaceSetter Performance Headers For Compact, Full Size Pick Ups SUVs Foreign and Domestic 4-, 6-, 8-cylinder PaceSetter Headers For Trucks Manufactured using mandrel-bent, 16- gauge mild steel tubing and port-matched, CNC-machined, 3/8 -thick head flanges. They are designed for the best combination of ease of installation, fit and maximum performance gain for your truck or SUV. PaceSetter Performance Headers come with gaskets, hardware and installation instructions. They are backed by a three year warranty. Refer to the warranty elsewhere in this catalog. PaceSetter Performance Headers are available with a standard black paint finish or optional, a polished, 2000 o F metallic ceramic coating. won t discolor like paint, chrome or even stainless steel, reduces underhood temperatures, helps the header resist rust and corrosion and is easy to keep clean. The coating itself is guaranteed not to chip, peel or flake for three years. Collector Design Notes Gasket Black Paint Part No. ARMOR *Coat CHEVROLET Long Tube Headers For Chevy Pickups & SUVs on pages 9, 16 & 17 1500, 2500 Pickup, 2/4WD 88-95 5.0L/5.7L w/o air inj. 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7318 70-1318 72C1318 1500, 2500 Pickup, 2/4WD 88-95 5.0L/5.7L w/ air inj. 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7318 70-1319 72C1319 1500, 2500 Pickup, 2/4WD 96-99 5.0L/5.7L w/o air inj. 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7318 70-1320 72C1320 1500, 2500 Pickup, 2/4WD 96-99 5.7L w/ air inj. 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7318 70-1332 72C1332 1500, 2500 Pickup, 2/4WD 96-99 4.3L V6 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7162 70-1321 72C1321 Silverado, Sierra, 2/4WD 99-06 4.8L/5.3L w/o air inj. 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G1341 70-1344 72C1344 Silverado, Sierra, 2/4WD 99-06 4.8L/5.3L w/ air inj. 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G1341 70-1345 72C1345 Silverado, Sierra, 2/4WD 07-13 4.8L/5.3L 1-5/8 2-1/2 1, 3, 12, 14, 15 G1341 70-1346 72C1346 LUV 2 & 4 WD 76-83 1.8L 1-1/2 2-1/2 1, 4, 5 G7105 70-1105 72C1105 S10, S15, 4WD 96-01 ALL 4.3L 1-1/2 2-1/2 1, 3, 12, 14, 15 G8521 70-1355 72C1355 S10, S15, 2WD 96-01 ALL 4.3L 1-1/2 2-1/2 1, 3, 12, 14, 15 G8521 70-1356 72C1356 S-10, 2WD 96-00 2.2L (eng. code 4) 1-1/2 2-1/4 1, 3, 6, 11 G7275 70-1203 72C1203 S10, S15 00-04 2.2L (eng. code 5) 1-1/2 2-1/4 1, 3, 6, 11 G7275 70-1200 72C1200 Blazer, Tahoe, Jimmy, Yukon, 2/4WD 92-95 5.0L/5.7L w/o air inj. 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7318 70-1318 72C1318 Blazer, Tahoe, Jimmy, Yukon, 2/4WD 92-95 5.0L/5.7L w/ air inj. 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7318 70-1319 72C1319 Suburban, 2/4WD 92-95 5.0l/5.7L w/o air inj. 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7318 70-1318 72C1318 Suburban, 2/4WD 92-95 5.0L/5.7L w/ air inj. 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7318 70-1319 72C1319 Tahoe, Yukon, Suburban, 2/4WD 96-99 5.0L/5.7L w/o air inj. 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7318 70-1320 72C1320 Tahoe, Yukon, Suburban, 2/4WD 96-99 5.7L w/ air inj. 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7318 70-1332 72C1332 Tahoe, Yukon, Suburban, 2/4WD 00-06 4.8L/5.3L w/o air inj. 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G1341 70-1344 72C1344 Tahoe, Yukon, Suburban, 2/4WD 00-06 4.8L/5.3L w/ air inj. 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G1341 70-1345 72C1345 Tahoe, Yukon, Suburban, 2/4WD 07-13 4.8L/5.3L 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G1341 70-1346 72C1346 1 Flanged Collector 2 Slip-fit Collector 3 Hook ups for smog and engine management sensors where required 4 No smog or engine management hook ups. O2 sensor fittings when required. 5 Comes with collector reducer. Fabrication required to connect to stock system 6 Comes with extensions to connect to stock system. Fabrication may be required. 7 Fits cylinder head with evenly-spaced ports 8 Fits cylinder head with paired ports 9 Catalytic converter must be relocated 11 50-States legal 12 Replaces stock exhaust manifold. Bolts to stock down pipe 13 Long tube header 14 Shorty header. 15 Retains catalytic converter in stock location 16 Y-pipe available to connect to stock system 17 X-pipe available to connect to stock system 18 H-pipe available to connect to stock system 19 Extensions available to hook to stock system 30 Includes catalytic converters Made In The USA Not legal for use on catalyst-equipped vehicles except for racing vehicles which may not be operated on a highway except headers with Design Note #11. Pre-catalyst vehicles must use original emission control devices. It is the responsibility of the customer to reinstall these devices on the vehicle. For over 43 years, Pacesetter has been bringing you Quality Parts at Affordable Prices We release and update our products monthly. Stop by the website to see whats new, grab some catalogs, become a reseller and receive additional info to help you or to add yourself to our mailing list.
TRUCK HEADERS 13 Collector Design Notes Gasket Part No. Black Paint ARMOR *Coat DODGE Long Tube Headers For Dodge Pickups on pages 9 & 17 D-50 79-89 2.0, 2.6L 1-1/2 2-1/2 1, 4, 6, 7 G7010 70-1020 72C1020 (Pass. side exh. w/evenly spaced ports) Power Ram 50 87-89 2.6L 1-1/2 2-1/2 1, 4, 6, 7 G7010 70-1020 72C1020 (Pass. side exh. w/evenly spaced ports) RAM 1500, 2500, 3500, 2/4WD 93-95 5.2L, 5.9L 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G8512 70-1312 72C1312 RAM 1500, 2500, 3500, 2/4WD 96-03 5.2L, 5.9L 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G8512 70-1315 72C1315 RAM 1500, 2/4WD 04-05 5.7L HEMI 1-5/8 2-1/2 1, 3, 6,15 G7210L(1) 70-1374 72C1374 G7210R(1) Dakota, Durango, 2/4WD 97-01 5.2L, 5.9L 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G8512 70-1317 72C1317 Dakota, 2/4WD 1996 5.2L, 5.9L 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G8512 70-1315 72C1315 Dakota, 2/4WD 92-95 5.2L, 5.9L 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G8512 70-1312 72C1312 FORD Long Tube Headers For Ford Pickups & SUVs on pages 9 & 17 Bronco, 2/4WD 87-95 5.0L (302 cu. in.) 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7322 70-1322 72C1322 Bronco, 2/4WD 86-95 5.8L (351 cu. in.) 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7322 70-1323 72C1323 Bronco, 2/4WD 1996 5.0L (302 cu. in.) 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7322 70-1324 72C1324 Bronco, 2/4WD 1996 5.8L (351 cu. in.) 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7322 70-1325 72C1325 Expedition, 2/4WD 97-02 4.6L 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7326 70-1326 72C1326 Expedition, 2/4WD 97-02 5.4L 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7326 70-1327 72C1327 Explorer 2/4WD 97-00 4.0L OHV 1-1/2 2-1/2 1, 3, 12, 14, 15 G7172 70-1385 72C1385 Explorer 2/4WD 98-07 4.0L SOHC w/ EGR 1-1/2 2-1/2 1, 3, 12, 14, 15 G7387R 70-1387 72C1387 Explorer 2/4WD 03-07 4.0L SOHC w/o EGR 1-1/2 2-1/2 1, 3, 12, 14, 15 G7387R 70-1388 72C1388 F150, F250 Pickup, (ex/h.d.) 2/4WD 87-95 5.0L (302 cu. in.) 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7322 70-1322 72C1322 F150, F250 Pickup, (ex/h.d.) 2/4WD 86-95 5.8L (351 cu. in.) 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7322 70-1323 72C1323 F150, F250 Pickup, (ex/h.d.) 2/4WD 1996 5.0L (302 cu. in.) 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7322 70-1324 72C1324 F150, F250 Pickup, (ex/h.d.) 2/4WD 1996 5.8L (351 cu. in.) 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7322 70-1325 72C1325 F150, F250 Pickup, (ex/h.d.) 2/4WD 97-03 4.6L 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7326 70-1326 72C1326 F150, F250 Pickup, (ex/h.d.) 2/4WD 97-03 5.4L 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7326 70-1327 72C1327 F150 2/4 WD 04-05 5.4L 1-5/8 2-1/2 1, 3, 6, 15 G7328 70-1382 72C1382 F150 2/4 WD 09-10 5.4L 1-5/8 2-1/2 1, 3, 6, 15 G7328 70-1384 72C1384 Ranger 2/4WD 97-00 4.0L OHV 1-1/2 2-1/2 1, 3, 12, 14, 15 G7172 70-1385 72C1385 Ranger 2/4WD 98-08 4.0L SOHC w/ EGR 1/1/2 2-1/2 1, 3, 12, 14, 15 G7387R 70-1387 72C1387 Ranger 2/4WD 03-08 4.0L SOHC w/o EGR 1-1/2 2-1/2 1, 3, 12, 14, 15 G7387R 70-1388 72C1388 Ranger 2WD 82-90 2.3L 1-1/2 2-1/2 1, 3, 5 G7051 70-1064 72C1064 Ranger, Bronco II, 2WD 88-89 2.9L V6 1-1/2 2 2, 3, 6 G7172 70-1117 72C1117 1 Flanged Collector 2 Slip-fit Collector 3 Hook ups for smog and engine management sensors where required 4 No smog or engine management hook ups. O2 sensor fittings when required. 5 Comes with collector reducer. Fabrication required to connect to stock system 6 Comes with extensions to connect to stock system. Fabrication may be required. 7 Fits cylinder head with evenly-spaced ports 8 Fits cylinder head with paired ports 9 Catalytic converter must be relocated 11 50-States legal 12 Replaces stock exhaust manifold. Bolts to stock down pipe 13 Long tube header 14 Shorty header. 15 Retains catalytic converter in stock location 16 Y-pipe available to connect to stock system 17 X-pipe available to connect to stock system 18 H-pipe available to connect to stock system 19 Extensions available to hook to stock system 30 Includes catalytic converters Made In The USA Not legal for use on catalyst-equipped vehicles except for racing vehicles which may not be operated on a highway except headers with Design Note #11. Pre-catalyst vehicles must use original emission control devices. It is the responsibility of the customer to reinstall these devices on the vehicle. 70-1325 P/U Bronco 72C1312 Ram 1500 2500 3500 Dakota 70-1385 Ranger
14 TRUCK HEADERS Make/Model Year Engine Collector Design Notes Gasket Black Paint Part No. ARMOR *Coat FORD Long Tube Headers For Ford Pickups & SUVs on page 16 & 17 Ranger, Bronco II, 2WD 88-89 2.9L V6 1-1/2 2 2, 3, 6 G7172 70-1117 72C1117 Ranger, Bronco ll, 4WD 88-89 2.9L V6, no auto column 1-1/2 2 2, 3, 6 G7172 70-1118 72C1118 Ranger,Explorer 2/4 WD 90-94 4.0L V6 1/1/2 2-1/2 1, 3, 6 G7172 70-1170 72C1170 Ranger 2/4WD 95-97 4.0L V6 1-1/2 3 1, 3, 6 G7172 70-1172 72C1172 ISUZU PU 2/4WD 81-92 1.8, 2.0L/2.3L Sq. Pt. 1-1/2 2-1/2 1, 4, 5 G7105 70-1105 72C1105 Trooper 85-92 2.6L Rd. Port 1-1/2 2-1/2 2, 3, 6 G7105 70-1125 72C1125 JEEP Long Tube Headers For Jeeps on page 16 & 17 CJ-5, 6, 7 81-86 258 c.i. 1-1/2 2-1/4 1, 3, 6, 11 G7128 70-1135 72C1135 Cherokee, Wagoneer 87-93 4.0L 1-1/2 2 2, 3, 6, 11 G7191 70-1191 72C1191 Cherokee w/o warm up cat. conv. 94-99 4.0L 1-1/2 Two 2 1, 2, 3, 6, 11 G7191 70-1192 72C1192 Cherokee w/ warm up cat. conv. 97-99 4.0L 1-1/2 Two 2 1, 2, 3, 6, 11 G7191 70-1190 72C1190 Wrangler 87-90 258 c.i. 1-1/2 2 1, 3, 6, 11 G7128 70-1128 72C1128 Wrangler (YJ) 91-95 2.5L 1-1/2 2-1/2 1, 3, 6, 11 G7138 70-1137 72C1137 Wrangler 91-99 4.0L 1-1/2 2 1, 3, 6, 11 G7129 70-1129 72C1129 Wrangler (TJ) 96-98 2.5L 1-1/2 2-1/2 1, 3, 6, 11 G7138 70-1138 72C1138 Wrangler incl. Unlimited 00-06 4.0L 1-1/2 Two 2 1, 3, 12 G7129 70-1133 72C1133 Wrangler (JK) NEW! 07-11 3.8L 1-5/8 2-1/2 1, 3, 9, 13, 16 G3240 70-3240 72C3240 MAZDA B-2200 85-93 2.0, 2.2L Driver Side Exh. 1-3/8 2 2, 3, 6 G7140 70-1140 72C1140 (carb. only) B-2600 2WD 87-88 2.6L 1-1/2 2-1/2 1, 4, 6, 7 G7010 70-1020 72C1020 B-4000, Navajo 90-94 4.0L/V6 1-1/2 2-1/2 1, 3, 6 G7172 70-1170 72C1170 B-4000, 2/4 WD 98-08 4.0L SOHC w/ EGR 1-1/2 2-1/2 1, 3, 12, 14, 15 G7387R 70-1387 72C1387 B-4000, 2/4 WD 03-08 4.0L SOHC w/o EGR 1-1/2 2-1/2 1, 3, 12, 14, 15 G7387R 70-1388 72C1388 B-4000 2/4WD 95-97 4.0L V6 1-1/2 3 1, 3, 6 G7172 70-1172 72C1172 MITSUBISHI Montero 83-87 2.6L Pass. Side Exh. 1-1/2 2-1/2 1, 4, 6, 7 G7010 70-1020 72C1020 Pickup 76-89 2.0, 2.6L 1-1/2 2-1/2 1, 4, 6, 7 G7010 70-1020 72C1020 Pass. Sd. Exh. 1 Flanged Collector 2 Slip-fit Collector 3 Hook ups for smog and engine management sensors where required 4 No smog or engine management hook ups. O2 sensor fittings when required. 5 Comes with collector reducer. Fabrication required to connect to stock system 6 Comes with extensions to connect to stock system. Fabrication may be required. 7 Fits cylinder head with evenly-spaced ports 8 Fits cylinder head with paired ports 9 Catalytic converter must be relocated 11 50-States legal 12 Replaces stock exhaust manifold. Bolts to stock down pipe 13 Long tube header 14 Shorty header. 15 Retains catalytic converter in stock location 16 Y-pipe available to connect to stock system 17 X-pipe available to connect to stock system 18 H-pipe available to connect to stock system 19 Extensions available to hook to stock system 30 Includes catalytic converters Made In The USA Not legal for use on catalyst-equipped vehicles except for racing vehicles which may not be operated on a highway except headers with Design Note #11. Pre-catalyst vehicles must use original emission control devices. It is the responsibility of the customer to reinstall these devices on the vehicle. 70-1133 Jeep TJ 72C1129 Jeep TJ 70-1138 Jeep TJ
TRUCK HEADERS 15 Collector Design Notes Gasket Black Paint Part No. ARMOR *Coat NISSAN/DATSUN Long Tube Headers For Nissan Pickups & SUVs on pages 16 & 17 720 2WD 81-85 Z20, Z22, Z24 (NAP-Z) 1-1/2 2 2, 3, 6 G7112 70-1112 72C1112 720 4WD 81-85 Z20,Z22,Z24 1-1/2 2 2, 3, 6 G7112 70-1113 72C1113 D-21 Hrdbdy 2WD 86-89 Z24 (NAP-Z) 1-1/2 2-1/2 1, 3, 5 G7112 70-1185 72C1185 Hardbody 4WD, Pathfinder 90-95 V6, 5 spd 1-1/2 2 1, 3, 6 G7175 70-1198 72C1198 Hardbody, Pathfinder, 4WD, Auto 90-95 3.0L, V6 1-1/2 2 2, 3, 6 G7175 70-1197 72C1197 D-21 Hrdbdy 4WD 90-95 KA24E 1-1/2 2-1/2 1, 3, 6 G7194 70-1194 72C1194 D-21 Hrdbdy 2WD, 5 spd 90-97 KA24E 1-1/2 2-1/2 1, 3, 6 G7194 70-1193 72C1193 Frontier, 2WD, 5-spd 98-00 2.4L 1-1/2 2-1/2 1, 3, 6 G7288 70-1196 72C1196 PLYMOUTH Arrow PU 78-83 2.0L, 2.6L 1-1/2 2-1/2 1, 4, 6, 7 G7010 70-1020 72C1020 TOYOTA Hi Lux 2/4 WD 75-83 2.2L/20R, 22R 1-1/2 2-1/2 1, 3, 5 G7072 70-1072 72C1072 Hi Lux (5 Spd Only) 79-83 2.2L/20R, 22R 1-1/2 2-1/2 2, 3, 6 G7072 70-1080 72C1080 PU 2/4 WD, 4-Runner (5 Spd Only) 84-89 2.2, 2.4L F.I. 1-1/2 2-1/2 1, 3, 6 G7183 70-1188 72C1188 20R, 22R, RE, REC PU 2/4 WD, 4-Runner 84-89 2.2, 2.4L F.I. 1-1/2 2-1/2 1, 3, 6 G7183 70-1187 72C1187 (4 Spd, Auto) (not column shift) 20R, 22R, RE, REC PU 4-Runner 2WD 90-95 22R/RE 1-1/2 2-1/2 1, 3, 6 G7183 70-1184 72C1184 PU 4-Runner 4WD 90-95 22RE 1-1/2 2-1/2 1, 3, 6 G7183 70-1183 72C1183 Tacoma 2WD 96-00 2.4L 1-1/2 2-1/4 1, 3, 6 G7181 70-1181 72C1181 Tacoma 4WD, PreRunner 2WD 96-00 2.7L, (ex. 9/00 CA) 1-1/2 2-1/4 1, 3, 6 G7181 70-1182 72C1182 Tundra 00-04 4.7L 1-5/8 2-1/2 1, 3, 12, 14, 15 G7301 70-1301 72C1301 Sequoia 00-04 4.7L 1-5/8 2-1/2 1, 3, 12, 14, 15 G7301 70-1301 72C1301 1 Flanged Collector 2 Slip-fit Collector 3 Hook ups for smog and engine management sensors where required 4 No smog or engine management hook ups. O2 sensor fittings when required. 5 Comes with collector reducer. Fabrication required to connect to stock system 6 Comes with extensions to connect to stock system. Fabrication may be required. 7 Fits cylinder head with evenly-spaced ports 8 Fits cylinder head with paired ports 9 Catalytic converter must be relocated 11 50-States legal 12 Replaces stock exhaust manifold. Bolts to stock down pipe 13 Long tube header 14 Shorty header. 15 Retains catalytic converter in stock location 16 Y-pipe available to connect to stock system 17 X-pipe available to connect to stock system 18 H-pipe available to connect to stock system 19 Extensions available to hook to stock system 30 Includes catalytic converters 72C1112 720 Not legal for use on catalyst-equipped vehicles except for racing vehicles which may not be operated on a highway except headers with Design Note #11. Pre-catalyst vehicles must use original emission control devices. It is the responsibility of the customer to reinstall these devices on the vehicle. 72C1184 Toyota Pickup 70-1182 Toyota Tacoma 72C2211 Ram 1500
16 LONG TUBE Headers For Trucks & SUVs Long Tube Headers for Trucks and SUV s Quality made, affordably priced long tube headers. Silverado, Tahoe, Suburban, Avalanche, Sierra 1500, Yukon 72C2267 CNC-machined 3/8- thick steel flanges are matched to the exhaust port profile for best seal and flow. Flash-controlled 16-gauge carbon steel primaries are more durable than thinner gauge stainless steel offered by some manufacturers Length and diameter of mandrel-bent primaries are optimized for best performance gain and easy installation Tubes enter collector in proper firing sequence for maximum scavenging. Complete with gaskets and header bolts. Optional available on all applications. Made In The USA NEW! Titan 70-2412 F150 4.6L 70-2328 EXTRA HORSEPOWER FOR YOUR RIDE 1-7/8 DIAMETER LONG TUBE HEADERS See Page 9 F150 5.4L 70-2229 Off Road 3 Y-Pipes Mandrel-bent, 3 diameter aluminized tubing mates to slip-fit header collectors and to stock or stock replacement exhaust system. May not work with long tube headers from other manufacturers. Some applications may require cutting stock intermediate pipe ahead of muffler and clamping or welding Y-pipe at installation. Clamps included. See header listing on opposite page for correct Y-pipe number. Off road use only. 82-1176
LONG TUBE Headers For Trucks & SUVs 17 Coll. Long Tube Truck and SUV Headers Design Notes Gasket Y-Pipe # Part No. Black Paint ARMOR *Coat CHEVROLET/ GMC 1-7/8 Diameter Long Tube Headers For Chevrolet & GMC on page 8 1500 2/4WD 14-15 5.3/6.2L 1-7/8 3 2, 4, 9, 13, 16, 22 G2268 82-1178 70-2268 72C2268 1500 2/4WD 07-13 4.8/5.3/6.0L 1-7/8 3 2, 4, 9, 13, 16, 22 G1341 82-1177 70-2269 72C2269 1500 2/4WD 07-13 4.8/5.3/6.0L 1-3/4 3 2, 4, 9, 13, 16, 22 G1341 82-1177 70-2267 72C2267 Suburban, Tahoe, Yukon 07-14 4.8/5.3/6.0L 1-7/8 3 2, 4, 9, 13, 16, 22 G1341 82-1177 70-2269 72C2269 Suburban, Tahoe, Yukon 07-14 4.8/5.3/6.0L 1-3/4 3 2, 4, 9, 13, 16, 22 G1341 82-1177 70-2267 72C2267 Trailblazer, Envoy, SS, 2WD/AWD 06-09 5.3/6.0L 1-3/4 3 2, 4, 9, 13, 16 G1341 82-1171 70-2276 72C2276 1500, SS, Avalanche, 2/4WD, AWD 99-06 4.8/5.3/6.0L 1-3/4 3 2, 3, 9, 13, 16, 22 G1341 82-1176 70-2265 72C2265 1500, SS, Avalanche, 2/4WD, AWD 99-06 4.8/5.3/6.0L 1-7/8 3 2, 3, 9, 13, 16, 22 G1341 82-1176 70-2266 72C2266 Suburban, Tahoe, Yukon 2015 5.3/6.0L 1-7/8 3 2, 4, 9, 13, 16, 22 G2268 82-1178 70-2268 72C2268 Suburban, Tahoe, Yukon 99-06 4.8/5.3/6.0L 1-3/4 3 2, 3, 9, 13, 16, 22 G1341 82-1176 70-2265 72C2265 Suburban, Tahoe, Yukon 99-06 4.8/5.3/6.0L 1-7/8 3 2, 3, 9, 13, 16, 22 G1341 82-1176 70-2266 72C2266 1500, 2500, 2/4WD 96-99 5.0/5.7L 1-5/8 3 2, 3, 5, 9, 13, 20 G7318 N/A 70-2262 72C2262 w/ EGR only Tahoe, Yukon, Suburban, 2/4WD 96-99 5.0/5.7L 1-5/8 3 2, 3, 5, 9, 13, 20 G7318 N/A 70-2262 72C2262 w/ EGR only Blazer, Tahoe, Yukon, Jimmy, 2/4WD 92-99 5.0/5.7L 1-5/8 3 2, 4, 5, 9, 13, 20 G7318 N/A 70-2260 72C2260 w/o air inj. or EGR Suburban 2/4WD 92-99 5.0/5.7L 1-5/8 3 2, 4, 5, 9, 13, 20 G7318 N/A 70-2260 72C2260 w/o air inj. or EGR 1500, 2500, 2/4WD 88-99 5.0/5.7L 1-5/8 3 2, 4, 5, 9, 13, 20 G7318 N/A 70-2260 72C2260 w/o air inj. or EGR DODGE RAM 1500, (exc. Mega Cab), 2/4WD 03-07 5.7L Hemi 1-3/4 3 2, 3, 9, 13, 16 G7210L(1) 82-1187 70-2211 72C2211 G7210R(1) RAM 1500, 2/4WD 96-12 5.2L / 5.9L 1-3/4 3 2, 3, 9, 13, 16 G8512 82-1183 70-2213 72C2213 FORD F150 4WD 04-08 4.6L 1-3/4 3 2, 3, 9, 13, 16 G7326 82-1156 70-2328 72C2328 F150, 2/4WD 04-08 5.4L 1-3/4 3 2, 3, 9, 13, 16 G7328 82-1156 70-2229 72C2229 F150 2/4WD 09-10 5.4L 1-3/4 3 2, 3, 9, 13, 16 G7328 70-2229 72C2229 F150, F250, (exc HD & SD) 2WD 97-03 5.4L 1-3/4 3 2, 3, 9, 13, 16 G7326 82-1153 70-2226 72C2226 incl. Lightning, Harley-Davidson F150, F250, (exc HD & SD), 4WD 97-03 5.4L 1-3/4 3 2, 3, 9, 13, 16 G7326 82-1154 70-2227 72C2227 F150, F250, 2/4WD 80-96 5.0L (302W) 1-5/8 3 2, 3, 5, 9, 16 G7322 N/A 70-2222 72C2222 F150, F250, 2/4WD 80-96 5.8L (351W) 1-5/8 3 2, 3, 5, 9, 16 G7322 N/A 70-2223 72C2223 JEEP Wrangler JK NEW! 07-11 3.8L 1-5/8 2-1/2 1, 3, 9, 13, 16 G3240 82-1230 70-3240 72C3240 Flanged Collector 82-1234 w/cat converters NISSAN Titan 2/4WD 04-08 5.6L 1-3/4 3 2, 4, 9, 13, 19 G7412 82-1191 70-2412 72C2412 70-2229 F150 70-2226 F150 72C2267 1500, Tahoe 1 Flanged Collector 2 Slip-fit Collector 3 Hook ups for smog and engine management sensors where required 4 No smog or engine management hook ups. O2 sensor fittings when required. 5 Comes with collector reducer. Fabrication required to connect to stock system 6 Comes with extensions to connect to stock system. Fabrication may be required. 7 Fits cylinder head with evenly-spaced ports 8 Fits cylinder head with paired ports 9 Catalytic converter must be relocated 11 50-States legal 12 Replaces stock exhaust manifold. Bolts to stock down pipe 13 Long tube header 14 Shorty header. 15 Retains catalytic converter in stock location 16 Y-pipe available to connect to stock system 17 X-pipe available to connect to stock system 18 H-pipe available to connect to stock system 19 Extensions available to hook to stock system 30 Includes catalytic converters Made In The USA 72C2211 Ram Not legal for use on catalyst-equipped vehicles except for racing vehicles which may not be operated on a highway except headers with Design Note #11. Pre-catalyst vehicles must use original emission control devices. It is the responsibility of the customer to reinstall these devices on the vehicle.
18 Shorty/Mid Tube Headers for Trucks & SUVs Replace inefficient stock exhaust manifolds Add power and performance Increase engine efficiency CNC-machined, port-matched 3/8 -thick flanges Mandrel-bent, 16-gauge tubing for durability Shorty Headers connect to stock Y-pipe MidTube Headers (Design Note #6) All retain stock catalytic converter Gaskets and header bolts included metallic ceramic coating Available Collector Design Notes Gasket Black Paint Part No ARMOR *Coat CHEVROLET/GMC Long Tube Headers For Chevy/GMC Pickups & SUVs on pages 9 & 17 1500, 2500 Pickup, 2/4WD 88-95 5.0L/5.7L w/o air inj. 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7318 70-1318 72C1318 1500, 2500 Pickup, 2/4WD 88-95 5.0L/5.7L w/ air inj. 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7318 70-1319 72C1319 1500, 2500 Pickup, 2/4WD 96-99 5.0L/5.7L w/o air inj. 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7318 70-1320 72C1320 1500, 2500 Pickup, 2/4WD 96-99 5.7L w/ air inj. 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G1318 70-1332 72C1332 1500, 2500 Pickup, 2/4WD 96-99 4.3L V6 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7162 70-1321 72C1321 Silverado, Sierra, 2/4WD 99-06 4.8L/5.3L w/o air inj. 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G1341 70-1344 72C1344 Silverado, Sierra, 2/4WD 99-06 4.8L/5.3L w/ air inj. 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G1341 70-1345 72C1345 Silverado, Sierra, 2/4WD 07-13 4.8L/5.3L 1-5/8 2-1/2 1, 3, 12, 14, 15 G1341 70-1346 72C1346 Silverado, Sierra, 2/4WD 14-15 5.3L/6.2L 1-5/8 2-1/2 1, 3, 12, 14, 15 G1341 70-1358 72C1358 S10, S15, 4WD 96-01 ALL 4.3L 1-1/2 2-1/2 1, 3, 12, 14, 15 G8521 70-1355 72C1355 S10, S15, 2WD 96-01 ALL 4.3L 1-1/2 2-1/2 1, 3, 12, 14, 15 G8521 70-1356 72C1356 Blazer, Tahoe, Jimmy, Yukon, 2/4WD 92-95 5.0L/5.7L w/o air inj. 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7318 70-1318 72C1318 Blazer, Tahoe, Jimmy, Yukon, 2/4WD 92-95 5.0L/5.7L w/ air inj. 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7318 70-1319 72C1319 Suburban, 2/4WD 92-95 5.0l/5.7L w/o air inj. 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7318 70-1318 72C1318 Suburban, 2/4WD 92-95 5.0L/5.7L w/ air inj. 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7318 70-1319 72C1319 Tahoe, Yukon, Suburban, 2/4WD 96-99 5.0L/5.7L w/o air inj. 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7318 70-1320 72C1320 Tahoe, Yukon, Suburban, 2/4WD 96-99 5.7L w/ air inj. 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7318 70-1332 72C1332 Tahoe, Yukon, Suburban, 2/4WD 00-06 4.8L/5.3L w/o air inj. 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G1341 70-1344 72C1344 Tahoe, Yukon, Suburban, 2/4WD 00-06 4.8L/5.3L w/ air inj. 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G1341 70-1345 72C1345 Tahoe, Yukon, Suburban, 2/4WD 07-14 4.8L/5.3L 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G1341 70-1346 72C1346 Tahoe, Yukon, Suburban, 2/4WD 2015 5.3L/6.2L 1-5/8 2-1/2 1, 3, 12, 14, 15 G1341 70-1358 72C1358 DODGE Long Tube Headers For Dodge Pickups on page 17 RAM 1500, 2500, 3500, 2/4WD 93-95 5.2L, 5.9L 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G8512 70-1312 72C1312 RAM 1500, 2500, 3500, 2/4WD 96-03 5.2L, 5.9L 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G8512 70-1315 72C1315 RAM 1500, 2/4WD 04-05 5.7L HEMI 1-5/8 2-1/2 1, 3, 6,15 G7210L(1) 70-1374 72C1374 G7210R(1) Dakota, Durango, 2/4WD 97-01 5.2L, 5.9L 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G8512 70-1317 72C1317 Dakota, 2/4WD 1996 5.2L, 5.9L 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G8512 70-1315 72C1315 Dakota, 2/4WD 92-95 5.2L, 5.9L 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G8512 70-1312 72C1312 FORD Long Tube Headers For Ford Pickups & SUVs on page 17 Bronco, 2/4WD 87-95 5.0L (302 cu. in.) 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7322 70-1322 72C1322 Bronco, 2/4WD 86-95 5.8L (351 cu. in.) 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7322 70-1323 72C1323 Bronco, 2/4WD 1996 5.0L (302 cu. in.) 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7322 70-1324 72C1324 Bronco, 2/4WD 1996 5.8L (351 cu. in.) 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7322 70-1325 72C1325 Expedition, 2/4WD 97-02 4.6L 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7326 70-1326 72C1326 Expedition, 2/4WD 97-02 5.4L 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7326 70-1327 72C1327 Explorer 2/4WD 97-00 4.0L OHV 1-1/2 2-1/2 1, 3, 12, 14, 15 G7172 70-1385 72C1385 Explorer 2/4WD 98-07 4.0L SOHC w/ EGR 1-1/2 2-1/2 1, 3, 12, 14, 15 G7387 70-1387 72C1387 Explorer 2/4WD 03-07 4.0L SOHC w/o EGR 1-1/2 2-1/2 1, 3, 12, 14, 15 G7387 70-1388 72C1388 F150, F250 Pickup, (ex/h.d.) 87-95 5.0L (302 c.i.) 2/4WD 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7322 70-1322 72C1322 F150, F250 Pickup, (ex/h.d.) 86-95 5.8L (351 c.i.) 2/4WD 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7322 70-1323 72C1323 F150, F250 Pickup, (ex/h.d.) 1996 5.0L (302 c.i.) 2/4WD 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7322 70-1324 72C1324 F150, F250 Pickup, (ex/h.d.) 1996 5.8L (351 c.i.) 2/4WD 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7322 70-1325 72C1325 F150, F250 Pickup, (ex/h.d.) 97-03 4.6L 2/4WD 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7326 70-1326 72C1326 F150, F250 Pickup, (ex/h.d.) 97-03 5.4L 2/4WD 1-1/2 2-1/2 1, 3, 11, 12, 14, 15 G7326 70-1327 72C1327 F150 2/4 WD (exc. H.D) 04-08 5.4L 1-5/8 2-1/2 1, 3, 6, 15 G7328 70-1382 72C1382 F150 2/4 WD (exc. H.D) 09-10 5.4L 1-5/8 2-1/2 1, 3, 6, 15 G7328 70-1384 72C1384 Ranger 2/4WD 97-00 4.0L OHV 1-1/2 2-1/2 1, 3, 12, 14, 15 G7172 70-1385 72C1385 Ranger 2/4WD 98-08 4.0L SOHC w/ EGR 1/1/2 2-1/2 1, 3, 12, 14, 15 G7387 70-1387 72C1387 Ranger 2/4WD 03-08 4.0L SOHC w/o EGR 1-1/2 2-1/2 1, 3, 12, 14, 15 G7387 70-1388 72C1388 MAZDA B-4000, 2/4WD 98-08 4.0L SOHC w/ EGR 1-1/2 2-1/2 1, 3, 12, 14, 15 G7387 70-1387 72C1387 B-4000, 2/4WD 03-08 4.0L SOHC w/o EGR 1-1/2 2-1/2 1, 3, 12, 14, 15 G7387 70-1388 72C1388 TOYOTA Tundra, Sequoia 00-04 4.7L 1-5/8 2-1/2 1, 3, 12, 14, 15 G7301 70-1301 72C1301 1 Flanged Collector 2 Slip-fit Collector 3 Hook ups for smog and engine management sensors where required 4 No smog or engine management hook ups. O2 sensor fittings when required. 5 Comes with collector reducer. Fabrication required to connect to stock system 6 Comes with extensions to connect to stock system. Fabrication may be required. 7 Fits cylinder head with evenly-spaced ports 8 Fits cylinder head with paired ports 9 Catalytic converter must be relocated 11 50-States legal 12 Replaces stock exhaust manifold. Bolts to stock down pipe 13 Long tube header 14 Shorty header. 15 Retains catalytic converter in stock location 16 Y-pipe available to connect to stock system 17 X-pipe available to connect to stock system 18 H-pipe available to connect to stock system 19 Extensions available to hook to stock system 30 Includes catalytic converters Made In The USA
TM Performance Exhaust Systems Street-Legal Horsepower! 19 Installs behind catalytic converter, legal in all states Ready to install, nothing else to buy Original factory hangers for easy installation Up to 12%-14% power increase at the rear wheels 16 gauge aluminized tubing Fully-welded stainless steel muffler Mandrel-bent for maximum flow efficiency Chrome-plated stainless steel tips included Tailpipe Tip Diameter Side Exit JEEP YJ, Wrangler 87-96 4.0L 2-1/2 3 86-2872 TJ, Wrangler 97-99 4.0L 2-1/2 3 86-2874 TJ, Wrangler 00-06 4.0L 2-1/2 3 86-2875 Wrangler Unlimited 04-06 4.0L 2-1/2 3 86-2876 Wrangler 2Dr (JK) 07-10 3.8L 2-1/2 3-1/2 86-2877 Wrangler 4Dr (JK) 07-10 3.8L 2-1/2 3-1/2 86-2878 TOYOTA Pick-Up All WB, 2/4WD 86-95 4 & 6 Cyl. 2-1/4 3 86-2800 Made In The USA 86-2872 YJ Wrangler 88-2877 JK Wrangler 86-2874 TJ Wrangler 86-2876 Wrangler Unlimited 86-2800 Toyota Pickup 86-2875 TJ Wrangler
20 MONZA MONZA Performance Exhaust Systems The exhaust flow of an engine has a direct effect on its performance. MONZA Performance Exhaust Systems utilize the right combination of larger than-stock, 16- gauge, mandrel-bent tubing and low back-pressure, high-flow performance mufflers for cooler, smoother engine operation and increased performance. Each system uses corrosion-resistant aluminized steel and features chrome-plated T304 Stainless Steel MONZA Premium Exhaust Tips. The finish is a durable black paint. Necessary hardware and instructions are included. MONZA Performance Exhaust Systems are designed to replace the original equipment muffler system and, in many cases, attach to the stock catalytic converter. Performance Exhaust Systems Made in the USA /Code (C)-CatBack (R)-Rear MONZA Tips Style/ Part# AUSTIN HEALY Sprite 63-74 1098, 1275cc R 1-5/8 DA/2-1/2 88-1242 BMW 325iC (E30) 86-93 2.7L C Dual 2 DA/2-1/2 88-1361 325e, es, i, is, ix (E 30) 87-91 2.5L C Dual 2 DA/2-1/2 88-1361 CHEVROLET Cavalier 2-dr. Coupe / 4-dr. 99-05 2.2L (all), 2.4L C 2-1/4 SP/4 88-1479 Monte Carlo 00-05 3.1/3.4L C 3 to dual 2-1/2 SA/3-1/2 88-1484 DODGE Neon 00-05 2.0L C 2-1/4 (2) SA/3-1/2 88-1431 EAGLE Talon, 2WD Turbo/Non-Turbo 92-94 2.0L DOHC C 2-1/2 SP/4 88-1348 FORD Escort ZX2 98-03 2.0L C 2-1/4 SP/4 88-1436 Probe 93-97 2.0L C 2-1/4 SP/4 88-1404 HONDA Accord EX 94-97 2.2L C 2-1/4 SP/4 88-1456 Civic Si 99-00 1.6L C 2-1/2 SP/4 88-1429 Civic del Sol 93-97 1.5L, 1.6L C 2-1/4 SP/4 88-1428 Civic CX, DX, LX, HX 2/4 door, Hatchback 96-00 1.6L C 2-1/4 SP/4 88-1422 Civic EX 2/4 door 96-00 1.6L C 2-1/4 SP/4 88-1423 Tip Styles: D=Dual - S=Single - A=Angle Cut - P=Straight Cut, Rolled End 88-1496 Maxima 88-1428 Civic del Sol 88-1479 Cavalier Sunfire
MONZA Performance Exhaust Systems 21 /Code (C)-CatBack (R)-Rear MONZA Tips Style/ Part# MAZDA RX7 83-85 12A, 13B R 2 DA/2-1/2 88-1379 MG MG, GT 62-74 1.8L R 1-3/4 DA/2-1/2 88-1244 MGB 75-80 1.8L R 1-3/4 DA/2-1/2 88-1245 Midget 64-69 1.1/1.3L R 1-5/8 DA/2-1/2 88-1242 Midget, Dual Tips 75-80 1.5L R 1-5/8 DA/2-1/2 88-1333 MINI Cooper S NEW! 02-08 1.6L C 2-1/2 DP/3 (dual) 88-1382 MITSUBISHI Eclipse 2WD, all 92-94 2.0L DOHC C 2-1/2 SP/4 88-1348 NISSAN / DATSUN 200SX 95-96 1.6, 2.0L Fed Emn C 2 SP/4 88-1442 200SX 97-98 2.0L only Fed Emn C 2 SP/4 88-1442 280Z w/cat. Conv. 75-78 2.8L C 2 DA/2-1/2 88-1226 280Z w/o Cat. Conv. 75-78 2.8L C 2 DA/2-1/2 88-1226 280ZX Non-Turbo 81-83 2.8L C 2 DA/2-1/2 88-1339 Maxima 95-99 3.0L C 2-1/4 SP/4 88-1496 Sentra 95-98 1.6L Fed Emn C 2 SP/4 88-1442 OLDSMOBILE Alero 99-04 all C 2-1/2 DP/3 (dual) 88-1474 PONTIAC Grand Am 99-04 all C 2-1/2 DP/3 88-1474 Grand Prix GTP 97-03 3.8L supercharged C 3 to dual 2-1/2 SP/3-1/2 88-1484 Sunfire, 2/4 Dr. 99-05 2.2L (All), 2.4L C 2-1/4 SP/4 88-1479 PLYMOUTH Laser 2WD, all 92-94 2.0L DOHC C 2-1/2 SP/4 88-1348 Neon 00-05 2.0L C 2-1/4 (2) SA/3-1/2 88-1431 TOYOTA Supra 86-92 7MGE, 7MGTE C 2-1/2 DA/2-1/2 88-1407 TRIUMPH TR2 56-57 2.0L R 1-3/4, 2 DA/2-1/2 88-1282 TR3 58-62 2.1L R 1-3/4, 2 DA/2-1/2 88-1282 TR4 63-68 2.1L R 1-3/4, 2 DA/2-1/2 88-1282 TR6 73-75 2.5L R 1-5/8, 1-3/4 DA/2-1/2 88-1287 GT6, MK2, MK3 69-78 2.0L R 1-3/8, 1-3/4 DA/2-1/2 88-1285 TR7 75-80 2.0L R 1-3/4 DA/2-1/2 88-1289 Spitfite, MK3, MK4 67-80 1.3L, 1.5L R 1-3/8, 1-3/4 DA/2-1/2 88-1284 TR250 71 2.5L R 1-3/8, 1-3/4 DA/2-1/2 88-1285 VOLKSWAGEN Jetta III 93-98 1.8L/2.0L, 8-Valve C 2-1/4 SP/4 88-1343 Tip Styles: D=Dual - S=Single - A=Angle Cut - P=Straight Cut, rolled end 88-1282 TR4 88-1226 280Z NEW! 88-1382 Mini Cooper S
22 DIRECT-FIT CATALYTIC CONVERTERS PaceSetter is a leading designer and manufacturer of quality-made, affordably-priced headers, exhaust systems and components since 1972. We now offer direct-replacement catalytic converter systems featuring EPA-approved catalytic converters. All are Made In The USA! Honeycomb Structured Catalytst 3/4 CNC Machined Flanges Stainless Steel Converter Bodies Mandrel-bent Stainless Steel Mounts for factory Heat Shields Provisions for O 2 Sensors 324004 S80 Made In The USA 753505 Titan, Armada, Pathfinder, QX56
DIRECT-FIT CATALYTIC CONVERTERS 23 324190 Commander Grand Cherokee 201014 Altima 201036 Sebring Avenger 750056 Sienna 324042 Lancer 201096 Santa Fe 201074 Accord Odyssey Pilot Ridgeline TL MDX 750028 Rav 4 324026 Golf GTI VR6, Jetta 201116 Frontier Xterra 201053 QX4 Pathfinder 750060 Elantra Tiburon 324082 Wrangler 201128 Sentra 201112 Aveo Wave Swift 756038 Galant
24 MONZA Exhaust Tips PaceSetter s MONZA Exhaust Tips are the perfect ending for any exhaust system, from stock to race-modified. The best-known polished and chrome-plated steel exhaust tips, these are the standard by which all other premium tips are compared. MONZA Exhaust Tips include the classic Dual 2-1/2 and 3 Outlet Tips with Resonators for cars, trucks, and SUV s, and Single 3 Outlet with Resonators for all applications. Each features slash-cut outlets with glass-packed resonators and can be clamped- or welded-on. MONZA Single & Dual Outlet, Slash Cut Dual Outlet w/resonators, Slash Cut Tip Outlet Overall Length Fits Tailpipe Part Number 2 1/2 17 2 95-9904 2 1/2 17 2 1/4 95-9905 3 17 2 1/4 95-9917 3 17 2 1/2 95-9918 3 17 3 95-9919 Single Outlet w/resonator, Slash Cut Tip 3 16 1/2 2 95-9936 3 16 1/2 2 1/4 95-9938 3 16 1/2 2 1/2 95-9940 All Tips may be clamped or welded in place. Clamps NOT provided. 18" Chrome Tips for Trucks These tips are the perfect diameter (3-1/2 ) and length (18 ) for any truck or SUV with dual exhausts exiting out the back. Available in polished and chrome plated steel with 30 deg. angle cut and in polished and chrome plated T304 stainless steel with angle-cut rolled outlet. 95-9666 95-9696 MONZA Single & Dual Outlet, Slash Cut Slash Cut and Rolled Tip Outlet Fits Tailpipe Part Number Polished and chrome plated steel 3 1/2 2 1/2 95-9666 Polished and chrome plated T304 stainless steel. 3 1/2 2 1/2 95-9696 Premium Tips for Cars, Trucks, and SUVs 95-4250 95-9776 These are polished and chrome plated stainless steel and are self clamping. Two styles to choose from. Everything included for bolt-on installation. Outlet Overall Length Fits Tailpipe Part No. 4 10 2-1/2 95-4250 3-1/2 12 2-1/2 95-9776 72C1250 Prelude Si 82-1149 Mustang 72C1335 Camaro Firebird
JEEP 50-States Legal Performance Exhaust PaceSetter Performance Headers 25 The best selling Jeep headers! Mandrel-bent steel tubing. thick, CNC Machined steel flanges for no-leak installation. Available with standard black paint finish or metallic-ceramic finish. Coll. Part No. Black Paint CJ-5, 6, 7 81-86 258 ci 1-1/2 2-1/4 70-1135 72C1135 Cherokee/Wgnr. 87-92 4.0L 1-1/2 2 70-1191 72C1191 Cherokee w/o warm up cat. 94-99 4.0L 1-1/2 2 (2) 70-1192 72C1192 Cherokee w/ warm up cat. 97-99 4.0L 1-1/2 2 (2) 70-1190 72C1190 Wrangler 87-90 258 ci 1-1/2 2 70-1128 72C1128 Wrangler 91-95 2.5L 1-1/2 2-1/2 70-1137 72C1137 Wrangler 91-99 4.0L 1-1/2 2 70-1129 72C1129 Wrangler (TJ) 97-99 2.5L 1-1/2 2-1/2 70-1138 72C1138 Wrangler, incl. Unlimited 00-06 4.0L 1-1/2 Two 2 70-1133 72C1133 Wrangler (JK) NEW! 07-11 3.8L 1-5/8 2-1/2 70-3240 72C3240 Made In The USA 72C1129 70-1133 PaceSetter Exhaust Systems TM TFX Performance Exhaust Systems feature 2-1/2 diameter, 16-gauge mandrel-bent aluminized tubing, a fully-welded aluminized steel POWER muffler and polished and chrome plated stainless steel tips. All systems use stock mounts and deliver a rich, powerful tone to your Jeep. See photos page 19 Part No. 86-2877 NEW! CNC-machined flanges Mandrel-bent 16-gauge steel tubing Ball joint collectors Wrangler (YJ) 87-96 2.5/4.0/4.2L 86-2872 Wrangler (TJ) 97-99 2.5/4.0L 86-2874 Wrangler (TJ) 00-06 2.5/4.0L 88-2875 Wrangler Unlimited 04-06 4.0L 86-2876 Wrangler 2Dr (JK) Wrangler 4Dr (JK) 07-11 07-11 3.8L 3.8L 86-2877 86-2878 Jeep 3.8L Headers and Y-Pipes Y-pipes available with or w/o Pacesetter's EPA-approved catalytic converters Gaskets and fastners included Headers Make/ Model Year Engine ARMOR* Gasket Black Coat JK, 2 and 4dr 07-11 3.8L 1-5/8" G3240 70-3240 72C3240 Y-Pipes Y-Pipe w/catalytic Converter Y-Pipe w/o catalytic Converter 82-1230 82-1232 NEW! 70-3240
26 Performance Stainless Steel Flex Joints Exhaust Components MONZA MetalCore Catalytic Converters 20% higher flow than ceramic core converters Faster light off for lower emissions Withstands higher heat than ceramic core 4 diameter stainless steel case Part # In/Out I.D. Overall Length 80-0064 NEW! 2 10.6 80-0065 NEW! 2-1/4 10.6 80-0066 2-1/2 10.6 80-0068 3 10.9 Stainless Steel Flex Joints minimize cracked manifolds or headers by allowing movement in all directions. These flex joints are stainless steel throughout. Weld-on applications only. Part Number 82.4214 NEW! 82-4215 NEW! 82-4216 82-4218 Flex Joint Length 6 6 6 6 In/Out I.D. 2" 2-1/4" 2-1/2 3 High Flow Bullet Catalytic Converters - Universal and Direct Fit Larger, efficient honeycomb catalyst 4 diameter seamless stainless steel case OBDll featuring O2 Sensor Port 5-year, 50,000-mile warranty Meet EPA and C.A.R.B. specs (OBDII exc. CA) Round converters are bullet style, approx. 11 long; Oval converters are two-piece stainless steel construction, 16 long. Configuration In/Out Engine Part No. Round 2 5.9L Max 80-0014 Round OBDll NEW! 2 5.9L 80-0214 Round 2-1/4 5.9L Max 80-0015 Round OBDll NEW! 2-1/4 5.9L 80-0215 Round 2-1/2 5.9L Max 80-0016 Round OBDll NEW! 2-1/2 5.9L 80-0216 Round 3 5.9L Max 80-0018 Round OBDll NEW! 3 5.9L 80-0218 Oval 2-1/4 5.9L Max 80-0025 Oval 2-1/2 5.9L Max 80-0026 Oval 3 5.9L Max 80-0028 72C1317 Dakota Durango 72C1020 Power Ram 50 Montero, B2600 D-50, Arrow P/U 70-1208 Camaro Firebird
Performance 27 Premium Band Clamps These band clamps allow you to assemble and disassemble a tubing joint for maintenance or replacement without cut-ting or distorting the tube. Made especially for i.d.-to-o.d. slip-fit joints. Clamp is approx. 3 long. Four sizes available. One per package. Aluminized Steel Band Clamps NEW! Formed using 14-gauge 1-1/4 -wide aluminized steel, these clamps are for situations that cannot use traditional muffler clamps. Proper installation allows easier exhaust system component disassembly. Two per package. I.D.-TO-O.D. 2 NEW! 2-1/4 NEW! 2-1/2 3 Part # 064200 064225 064250 064300 Part # Tube Size 040200 2 040225 2-1/4 040250 2-1/2 040300 3 18MM O2 Sensor Weld Bung and Plug Manufactured by PaceSetter, these 18 mm O2 sensor weld bungs and plugs are identical to those used on PaceSetter s own headers and catalytic converters. The weld bungs are precision-machined from 1 -diameter steel and feature 18mm x 1.5 pitch threads. The steel plugs carry the same 18mm x 1.5 thread to seal the weld bungs where necessary. Available in sets of 10 bungs and 10 plugs, 25 of each and 100 of each. Weld bungs available separately in the same quantities. Part # Quantity Included 18MC010 10 weld bungs, 10 plugs 18MC025 25 weld bungs, 25 plugs 18MC100 100 weld bungs, 100 plugs 18MS010 10 weld bungs only 18MS025 25 weld bungs only 18MS100 100 weld bungs only 18MP025 25 18MM plugs only NEW! 72C1387 Ranger, B4000 88-1226 280Z 88-1428 Civic del Sol 82-1178 Silverado, Sierra 72C1182 Tacoma 72C2259 G8