Project Planning Evolution classic. Traction Drive Elevator without Machine oom. ated Load 630 1050 kg. A Company of ThyssenKrupp Elevator ThyssenKrupp Aufzüge tk
oom Higher, Faster, Less. Facts, Data and Measurements. Evolution classic, the traction driven standard passenger elevator without machine room, has been designed for more powerful but also economical passenger service for residential buildings, medium-sized commercial buildings and hotels. The Thyssen Mini gearless, a frequency-controlled, gearless high-performance drive, moves standardized elevator cars with rated loads of 630 or 1000 kg resp. 675 or 1050 kg with open through at a speed of 1.0 m/s or 1.6 m/s. The standard equipment of our elevator installations implies the efficient, proven and convenient S8/K8 doors as two-part telescopic sliding doors in left-hand execution. However, they are also available in right-hand execution or as central opening execution. The telescopic doors are 900 mm in width, the central opening doors are available in widths of 800 and 900 mm. And to complete the range, you can select between the installation of the landing doors on the landing in a recess or entirely in the shaft. The following shaft ground plans and vertical sections show the door openings with gaps between the wall soffit or lintel and door frame which can be filled by means of concreting or plastering and thus easily be made to fit the wall plastering of the building. However, you can also use wall frames in the case of altered dimensions. You will find more details in our project planning document Door openings. Please find information on the overall design of elevator installations in our separate planning information. Should your requirements or demands exceed the following range, please contact one of our experienced consultants. Abbreviations: A = right-hand door soffit CD = car depth CW = car width = door width FF = finished floor Q = rated load = recess = shaft depth SH = shaft head SP = shaft pit = shaft width = unfinished floor v = speed Dimensions The dimensions indicated are finished measures if not stated expressly. door recess meas. Q with without in acc. [kg]/ open door A CD CW with DIN [pass.] through type [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] 18024/25 telescopic 900 55 1800 1855 1650 100 630/ no 800 1850 425 1400 1100 8 central 20 1780 1795 telescopic 900 55 1930 2040 1650 100 675/ yes 800 1850 425 1400 1100 9 central 20 1890 1920 telescopic 900 55 2500 2555 1650 100 1000/ no 800 1850 425 2100 1100 13 central 20 2480 2495 telescopic 900 55 2630 2740 1650 100 1050/ yes 800 1850 425 2100 1100 14 central 20 2590 2620 2
oom A Cut Above. Shaft Ground Plans. With open through 675 kg / 9 passengers 1050 kg / 14 passengers With central opening sliding doors: With telescopic sliding doors: With central opening sliding doors: CD CD 630 kg / 8 passengers 1000 kg / 13 passengers CW = 1100 CW = 1100 3
oom A Cut Above. Constructional Ground Plans and Shaft Head Plans. Occurring forces. Q [kg] 630 / 675 1000 / 1050 Occurring forces [kn] v [m/s] 1,0 1,6 1,0 1,6 P1 Shaft head recess (machine frame) 7 8 7 8 P2 Shaft head recess (machine frame) 10 11 16 17 P3 Shaft head recess (machine frame) 18 19 27 27 P4 Shaft head recess (machine frame) 10 11 11 12 01 Shaft ceiling (hoisting ring for machine) 10 10 10 10 02 Shaft ceiling (hoisting ring for doors) 10 10 10 10 Fill after installation. (by customer) Q [kg] 630 / 675 1000 / 1050 Occurring forces [kn] v [m/s] 1,0 1,6 1,0 1,6 P7 Shaft pit floor (guide rails) 18 19 25 26 P8 Shaft pit floor (car buffer) 73 78 102 105 P9 Shaft pit floor (counterweight buffer) 57 63 78 82 P10 Shaft pit floor (counterweight guide rails) 29 32 39 41 The forces P7 P10 never occur simultaneously! Operating box. Only in top landing. 4
oom ising to the Top. Vertical Section. SP min. = 1400 Travel height (TH) max. = 40 m (v = 1.0 m/s) Shaft head (SH) min. = 3650/3750 (v = 1.0 m/s) Travel height (TH) max. = 50 m (v = 1.6 m/s) Shaft head (SH) min. = 3750/3850 (v = 1.6 m/s) Door height (DH) = 2200/2300 DH + 100 Door height (DH) = 2000/2100 FF FF 5
For additional information as well as planning and project data please see Planning information: Passenger- and freight elevators (9700 000 1530 Evolution passenger elevators without machine room (9700 000 1531) Project planning documents: Passenger elevators without machine room, arranged in groups (9700 000 1533) Door openings comfort door S8/K8 (9700 000 1534) Evolution compact* traction drive elevator without machine room and shaft pit (9700 000 1538) * Not available for all countries, please contact our consultants. Please contact: ThyssenKrupp Aufzugswerke GmbH A Company of ThyssenKrupp Elevator P.O. Box 23 03 70, D-70623 Stuttgart, Germany Telephone: +49 (0) 71 58 12-0, Telefax: +49 (0) 71 58 12-25 85 E-mail: info@aufzuege.thyssen.com, Internet: www.thyssen-aufzuege.com Printed in Germany 9700 000 1537-1 05/02 The details quoted in this brochure can only be viewed as binding when confirmed expressly in writing.