Horizon Dependable dispensing Protecting your investment
Key Features Timeless and reliable, the Horizon is a flexible solution for your forecourt needs, maximising uptime and built to last in the most challenging of environments. Dependable Electronics Attractive and Long-lasting Image > Tested at -40 C to +70 C, with 95% RH > No information lost during power outages > Polycarbonate upper door and Polyester coated lower door decal prevent rust > Standard 4-year corrosion warranty on exterior surfaces > Unlimited custom graphic options Low Drift Metering Enhanced, Secure Pulser > V+ is the most accurate and lowest drift positive displacement meter in the world > Fixed stroke length by design > Highly tuned, wear resistant materials > End-to-end encryption > Lift-off detection > Physically secure
Lasting Performance Enhancing your customers forecourt experience. Why Horizon? Did you know that the dispenser purchasing price only represents roughly 33% of the Total cost of Ownership over a 10 year period? This includes fuel lost due to theft and/or meter drift along with costs of maintaining the dispenser**. Because a dispenser is more than a 10 year investment, Gilbarco Veeder-Root ensures every Horizon component is engineered and constructed for reliability and longevity in any environment. Horizon saves you the most money over the long-run. Investment Protection Superior components designed to eliminate loss > The world s lowest drift positive displacement meter > Secure, Intelligent Pulser prevents theft/fraud Dependable High quality parts and build for a more reliable dispenser > Superior electronics increase uptime > Proven components used in over 200,000 sites around the world Timeless Image Elegant image attracts customers over the life of the dispenser. > Standard 4-year corrosion warranty > Minimize your image refresh costs
Benefits Robust and reliable but designed to attract customers, Horizon provides leading edge technology with the flexibility to suit your needs. V+ meter > Use of V+ meter can save 7,410* per year on a site that delivers 3M litres per year Dependability > Gilbarco Veeder-Root uses longer life components which will save about 700* per site per year Secure Interface Pulser (SIP) > Use of SIP can save 2,600* per year Timeless Image > No rust, fewer image refresh maintenance can save up to 9,000* per site per year Nozzle boot > Customers complain that hanging hardware (nozzles, breakaways & hoses) represent 40% of their overall maintenance spend > Nozzle boot is designed for prolonged nozzle life > Reinforced nylon material absorbs shock and lasts for a long time > Nozzle boot enables more secure stowing (reduce drops that damage nozzle tips) Gilbarco Veeder-Root s global sales, technical & service partners provide you the service and support, when you need, where ever you need. > Rugged nozzle boot design > Easy upgradeability with FlexPay CRIND > LED backlit large 1.5" customer display *Visit www.gilbarco.eu/horizon to find out how much you could save.
Technical Specifications 884.5 [ 34.82] 1300.0 [ 51.18] 2433.6 [ 95.81] 1300.0 [ 51.2] 1145.9 [ 45.1] 1540.6 [ 60.65] 734.9 [ 28.9] 2X 549.4 [ 21.6] A A 611.3 [ 24.07] 911.6 [ 35.89] 1133.3 [ 44.62] 2X 821.6 [ 32.3] 4X M10 LIFTING HOLES SIDE VIEW FRONT VIEW TOP VIEW VAPOUR RECOVERY ELECTRIC CABLE 2X 365.0 [ 14.37] 2X 730.0 [ 28.74] 277.0 [ 10.91] 33.0 [ 1.30] ANCHOR HOLES OF M10 VAPOUR RECOVERY 2X 365.0 [ 14.37] 2X 730.0 [ 28.74] 277.0 [ 10.91] ANCHOR HOLES OF M10 603.7 [ 23.77] 2X 255.1 [ 10.04] 150.0 [ 5.91] 603.7 [ 23.77] 2X 255.1 [ 10.04] GR 2 GR 4 GR 3 GR 1 FUEL INLET 2X 510.3 [ 20.09] GR 2 GR 4 GR 3 GR 1 181.5 [ 7.15] 2X 510.3 [ 20.09] 125.0 [ 4.92] 125.0 [ 4.92] 150.0 [ 5.91] 92.0 [ 3.62] 1029.7 [ 40.54] FUEL INLET ELECTRIC CABLE 33.0 [ 1.30] 125.0 [ 4.92] 1029.7 [ 40.54] FOOTPRINT/ GROUND PLAN (PUMPS) FOOTPRINT/ GROUND PLAN (DISPENSER) Technical Specifications Standard Features Hydraulics > Gilbarco V+ Meter > Gilbarco 10 Blade vane Pump Electronics > Calculator Gilbarco Sandpiper-II > Interfaces: Standard 2-wire, Australia 2-wire, IFSF LON, ATCL, PumaLAN, ER3 Mechanical > Electronic stainless steel valves > Housing powder coated steel > Hose management internal hose connection with retraction > Nozzles ZVA > Hoses Elaflex Options > Compartment isolation for as low as -40 C ambient temperature > Elaflex swivel > Stainless steel > Nozzle magnet adaptor > SK700-II standard options > Ecometer (Q4,2010) Technical Characteristics and Performance > Ambient temperature range: +40 C to -30 C. As low as -40 C as an option > Meter flow rate from 4 L/min to 40 L/min > Power consumption heaters: 0-950 Watts > Power supply: 230V +10% -15%, 50Hz ± 2Hz
Gilbarco Veeder-Root Products Behind every successful forecourt Gilbarco Veeder-Root is the largest supplier in the world representing the leading brands of solutions and technologies that provides convenience, control and environmental integrity to retail fuelling and adjacent markets. Gilbarco Veeder-Root is the only manufacturer that can provide all your fuel forecourt solutions. Pumps & Dispensers Designed to be at the core of retail forecourt solutions centering on quality and innovation, Gilbarco Veeder-Root s broad portfolio of pumps and dispensers are proven to deliver profitability for our customers today and tomorrow. Automatic Tank Gauging Innovative tank monitoring and loss detection to automate wet stock management, environmental control and risk management across the network and allow centralised data management to optimise operational profitability. FlexPay Secure and flexible payment solutions to create new business at the pump. Retail Solutions The leading provider of solutions and tools to support fuel retailers in improving profits and preparing business for tomorrow s challenges. Submersible Pumps The most efficient way to pump fuel on a forecourt; consistent flow rates, no vapour lock and minimal maintenance. Forecourt Solutions Combine POS and forecourt equipment of any make or brand for efficient control and management of your petrol station forecourt. For more information contact us at: Gilbarco Veeder-Root Crompton Close, Basildon, Essex, SS14 3BA, UK INT Tel: +44 (0) 1268 533 090 UK Tel: +44 (0) 8443 711155 or visit: Email: gilbas.sales@gilbarco.com www.gilbarco.eu/horizon