Cargo Control Tie Down Straps & Transport Chain
CARGO CONTROL WARNINGS & INFORMATION Quality assurance and general information: We at Super Slings Inc. offer a full line of ratchet straps, tie downs, e-track tie downs, winch straps, tow straps, winches and all other load securement necessities. All items preassembled in 15, 20, 25 and 30 foot lengths to ensure timely delivery. All other custom lengths can be made within a very speedy turn around time. At Super Slings Inc. we take pride in our exceptional customer service and superior quality product with excellent price levels. We want to earn your business as a repeat customer. INSPECTION, CARE & USE OF SYNTHETIC WEB TIE DOWNS Removal From Service Environmental Considerations A tie down shall be removed from service if any of the 1. Tiedowns should be stored in a cool, dry and dark following are visible: place, and shall not be exposed to sunlight when not 1. Holes, tears, cuts, snags or embedded particles in the in use. Ultra-violet light will affect the strength of the webbing. synthetic webbing in varying degrees ranging from 2. Broken or worn stitching in load bearing stitch patterns. slight to total degradation. 3. Excessive abrasive wear of the webbing. 2. Chemically active environments can affect the 4. Knots in any part of the webbing. strength of tiedowns in varying degrees ranging from 5. Distortion, excessive pitting, corrosion or damage of little to total degradation. The tiedown manufacturer any fitting or component. or qualified person should be consulted before 6. Melting, charring or weld spatter on any part of the tiedowns are used or stored in chemically active webbing. environments. 7. Chemical Burns. 3. Tiedowns incorporating aluminum fitting(s) shall not 8. Any conditions which cause doubt as to the strength of be used where fumes, vapors, sprays, mists or the sling. liquids of alkalis and/or acids are present. 4. Webbing shall not be used at temperatures in excess Operating Practices of 194 degrees F (90 degrees C) or below -40 1. Determine weight of the cargo to be secured, including degrees F (-40 degrees C). expected Gravity G forces. 2. Consideration shall be given to the angle from the Inspection vertical (cargo tiedown to load angle) which reduces A. Initial Inspection Working Load Limit. Before any tiedown is placed in service it shall be 3. Select tiedown having suitable characteristics for the inspected by a designated person to ensure that the type of load and environment. correct tiedown is being used as well as to determine 4. Tiedown shall not be loaded in excess of the Working that the tiedown meets the requirements. Load Limit (WLL)*. B. Frequent Inspection 5. Tiedown shall be attached to provide control of the load This inspection shall be made by a qualified person and positioned in accordance with applicable handling the tiedown each time it is used. regulations. C. Periodic Inspection 6. Tiedown shall not be dragged on the floor, ground, or This inspection shall be conducted by designated over an abrasive surface. personnel. Frequency of inspection should be based 7. Tiedown shall not be tied into knots, or joined by on: knotting. 1. Frequency of use 8. Tiedown shall not be pulled from under loads if the load 2. Severity of service conditions is resting on the tiedown. 3. Experience gained on the service life of 9. Tiedown shall always be protected from being cut by tiedowns used in similar applications sharp corners, sharp edges, protrusions or abrasive 4. Inspection should be conducted at least surfaces. monthly 10. Tiedown equipped with metal fitting shall not be D. Repair of Tiedown dropped. No repairs of webbing, fittings, or stitching shall be 11. The opening in fittings must be the proper shape and permitted. size to insure that the fitting will seat properly in the anchorage point or other attachments. If the anchor Additional requirements and safe operating practices are outlined in point is inadequate to support the force of the tiedown current Federal, Provincial, CVSA Guidelines and/or other regulations system, then the load rating of the tiedown shall be as applicable. limited to the strength of the anchor point. 12. Tiedown shall not be used for lifting. Lifting includes raising, lowering and suspending. NISKU 505-11 Ave., Nisku, AB T9E 7N5 Ph: (780) 955 7111 Fx: (780) 955 7199
TRUCK STRAPS Super Slings Truck Straps are made with the highest quality, domestic polyester webbing. They are available in 1, 2, 3 and 4 widths, and stocking lengths of 15, 20, 25, 30 and 40. Custom lengths are available upon request. They also meet and exceed all North American Cargo Securement Standards. All Super Slings Truck Straps have load rating tags sewn on for prolonged life and road safety compliance. 2 Truck Straps Working Load: 1665. Break Strength: 5,000. Heavy Duty 3 Truck Straps 4 Truck Straps NISKU 505-11 Ave., Nisku, AB T9E 7N5 Ph: (780) 955 7111 Fx: (780) 955 7199
RATCHETS Super Slings Ratchet Straps are made with the highest quality, domestic webbing. Ratchet buckles are available from 1 wide handle to 4 long handle. Stock lengths are shown below and custom lengths are available upon request. Super Slings Ratchet Straps meet and exceed all North American Cargo Securement Standards. S-Hook Working Load: 585. Break Strength: 1,200. 1 Ratchet Straps with Working Load: 835. Break Strength: 2,500. Working Load: 865. Break Strength: 2,500. Stock Lengths: 7, 10, 15, and 20 2 Ratchet Straps Flat hook Working Load: 235. Break Strength: 700. Working Load: 1,665. Break Strength: 5,000. Stock Lengths: 15, 20, 25, and 30 E-Fitting Working Load: 1,500. Break Strength: 4,500. Available 2 Ratchet Buckles Short Handle Wide Handle Light Duty 3 Ratchet Straps Stock Lengths: 15, 20, 25 and 30 4 Ratchet Straps Stock Lengths: 15, 20, 25 and 30 NISKU 505-11 Ave., Nisku, AB T9E 7N5 Ph: (780) 955 7111 Fx: (780) 955 7199
GRADE 70 CHAIN AND HOOKS Grade 70 Transport Chain: Inch mm Barrel Quantity Weight/ 100ft 7 800 74 8 550 92 10 400 148 11 300 220 8,750 13 200 256 Stock Lengths with Grab Hooks: We stock in 10 and 15 lengths. s,, and are all stocked in 16 and 20 lengths. Custom lengths are available upon request. Grade 70 Grab Hooks: 0.25 0.38 0.38 0.34 1.94 0.65 0.41 2.38 1.15 2.63 8,800 1.30 2.78 Grade 70 Grab Hooks with Latch: B A 2.10 0.25 0.69 0.63 0.66 3.50 0.38 0.38 0.34 1.94 0.65 0.41 2.38 D C 8,800 1.15 1.30 2.63 2.78 2.10 0.69 0.63 0.66 3.50 Grade 70 Slip Hooks: 2,750 0.38 0.38 0.88 2.56 4,300 0.75 1.00 2.81 5,200 1.20 1.28 3.25 9,000 2.83 0.63 1.38 4.00 NISKU 505-11 Ave., Nisku, AB T9E 7N5 Ph: (780) 955 7111 Fx: (780) 955 7199