Hahn KT-N 6R / 6R Universal hinges for PVC doors! New! Now with Hahn KT-FIX
4 7 6 0 1 4 1 13 4 7 7 0 1 4 1 14 Performance statements can be found at www.dr-hahn.com 2
Hahn KT-N 6R 6R Universal hinges for PVC doors KT-N 6R with retaining angle for narrow profile sections Quick installation zero position predefined in as-delivered condition Good weathering resistance due to modern plastics Horizontal adjustment ± 5 mm Inaccessible for unauthorised persons Other advantages n Six possible adjustments which can be carried out single-handedly without raising or removing the door. n CE-certified with hinge class 13 for very high loads. Versions with KT-FIX fastening system certified with hinge class 14. n Bearing pin can be removed with door mounted, e.g. with low lintel. 99 n Supports 140 kg, depending of profile section design. Versions with KT-FIX fastening system for up to 160 kg. n High surface quality available in all RAL colours and special designs. n Four upstand ranges: 13 18 mm, 15 20 mm, 18 23 mm and 22 27 mm n Hahn step screw for bridging very high heat insulating chambers. Variable adjustment of sealing pressure by means of Hahn toothed bushing ± 2.5 mm + 0.5 mm reserve within the upstand range 112 43/45/48/52 Good fit even with very high heat insulating chambers, due to extended centring pins 106 Contemporary design due to subtle contours 112 43/45/48/52 Flawless appearance bushing collar covers all adjustment gaps SKG-certified security integrated pin security without additiona parts Vertical adjustment variable from the zero position: raise + 4 mm lower 3 mm 3
New design With proven flexibility Proved products with improved technology and fresh design: The Hahn KT-N 6R und 6R premium hinges accentuate the beauty of attractive doors with their subtle design and stand out because of their efficient, high-calibre installation technology. Both series achieved hinge class 13 (versions with KT-FIX fastening system have been rated with hinge class 14) rating for very high loads during testing for CE labeling and thus may also be installed on emergency exit doors. A good fit is also ensured even with doors that have high heat insulating chambers. The hinges of both series are tested and approved for doors weighing up to 140 kg, depending on design of door frame. Versions with KT-FIX fastening system support up to 160 kg. All adjustments can be performed on site by one person without having to raise or remove the door. As tried, tested and proven in real world use, the hinges of the series Hahn KT-N 6R and Hahn 6R can be adjusted variably in six directions. Installation instructions Drill holes in frame and door. Note left or right-hand doors. 4
Install frame hinge blade and screw down (pre-assembled). Insert bearing element for left-hand or right-hand doors. Screw-on hinge blade for door. Insert caps. 5
Attractive Secure Rugged Front entrance doors are usually selected with care and based on individual requirements. After all, they serve as the calling card of a building for many years. In addition to reliability, particular emphasis is also placed on protection against break-ins. KT-N 6R and 6R series hinges have proven that they are secure in the demand ing tests of SKG. Bearing bushing and pin element are combined into a sturdy unit thanks to a newly developed type of pin. The pin is protected against unauthorised tampering when the door is closed without requiring any extra measures. Shape and colour can either make the hinge disappear or act as an attractive design element, depending on individual desires. All RAL colours and several individual metallic tones are available for every door, ensuring you find what you are looking for. The new cover strip results in a uniform colour scheme of all components. Adjustment instructions ca. 90 ca. 11 mm Mounting and removing the door while open 90. If necessary, knock out pin. Variable adjustment of sealing pressure. Horizontal adjustment, infinitely variable up to ± 5 mm. Height adjustment (vertical adjustment) variable from the zero position. Raise + 4 mm Lower 3 mm 6
Parts 1 2 KT-N KT-N with KT-Fix 3 4 5 with KT-Fix 6 KT-N 7 8 9 1 x KT-N 5 x 2 x 2 x 2 x KT-N 2 x 4 x 1 Frame hinge blade 13 18 mm KT-N / No. K400B0049 including bearing bushing 15 20 mm KT-N / No. K400B0051 (white) (pls indicate colour) KT-N / No. K400B0122 18 23 mm KT-N / No. K400B0053 KT-N / No. K400B0118 22 27 mm KT-N / No. K400B0055 KT-N / No. K400B0120 1 Frame hinge blade 13 18 mm KT-N / No. K400B0048 including bearing bushing 15 20 mm KT-N / No. K400B0050 (black) (pls indicate colour) KT-N / No. K400B0121 18 23 mm KT-N / No. K400B0052 KT-N / No. K400B0117 22 27 mm KT-N / No. K400B0054 KT-N / No. K400B0119 2 Door hinge blade (pls indicate colour) KT-N No. K400B0044 No. K500B0002 No. K500B0004 KT-N No. K400B0093 3 Bearing pin, complete KT-N / No. K400B0047 4 Lifting and lowering spindle white KT-N / No. K400K0027 black KT-N / No. K400K0016 5 Cap white KT-N / No. K400K0023 black KT-N / No. K400K0024 6 Cover strip (pls indicate colour) KT-N No. K400E0015 No. K500E0001 7 Locking screw (small) KT-N / No. E3300802 8 Special screw 6,3 x 45 KT-N / No. E3400801 9 Special screw 6,3 x 53 KT-N / No. K400E0014 Special screw 6,3 x 51 KT-N / No. K400E0026 Countersunk head tapping screw 6 x 40 KT-N / No. EF9000521 Self-drilling screw KT-N / No. E3300803 Bearing bushing white KT-N / No. K400K0021 black KT-N / No. K400K0022 7
Hahn KT-N 6R 6R Item numbers Packing unit 1 hinge per box Upstand range (13 18 mm) Upstand range (15 20 mm) Upstand range III (18 23 mm) Upstand range IV (22 27 mm) K460 n 0000 K560 n 0000 K470 n 0000 K570 n 0000 K470 n 0F30 K570 n 0F30 K480 n 0000 K580 n 0000 K480 n 0F30 K570 n 0F30 K490 n 0000 K590 n 0000 K490 n 0F30 K590 n 0F30 Packing unit 24 hinges per box Upstand range (13 18 mm) K460 n V000 K560 n V000 Upstand range (15 20 mm) K470 n V000 K470 n VF30 K570 n V000 K570 n VF30 Upstand range III (18 23 mm) K480 n V000 K480 n VF30 K580 n V000 K580 n VF30 Upstand range IV (22 27 mm) K490 n V000 K490 n VF30 K590 n V000 K590 n VF30 Accessories Drilling jig without clamp KT-N No. T316A0000 No. T315A0000 KT-N No. T316A0F02 No. T315A0F02 Drilling jig with clamp KT-N No. T316A0001 No. T315A0001 KT-N No. T316A0F03 No. T315A0F03 Automatic rod drilling jig for direct screw connection KT-N No. T416A0001 No. T415A0001 KT-N No. T416A0F03 No. T415A0F03 Step screw with flat-headed screw M6 x 15 KT-N/ No. K450A0005 Step screw with flat-headed screw M6 x 18 KT-N/ No. K450A0006 Step screw with flat-headed screw M6 x 22 KT-N/ No. K450A0011 Tool for screwing in step screw KT-N/ No. K450A0004 Direct installation with screws KT-FIX fastening system * Please indicate special colour (e.g. brilliant gold) Prsp. KT-N 6R 6R / GB / D-PRO0072 / 06.14 LW1 Subject to technical changes. Dr. Hahn GmbH & Co. KG Trompeterallee 162 170 D-41189 Mönchengladbach Postfach 40 01 09 D-41181 Mönchengladbach Phone + 49 (0) 2166 / 954-3 Fax + 49 (0) 2166 / 954-444 Internet www.dr-hahn.com E-Mail sales@dr-hahn.com