2011-08-1000 Ver. 1 ENGLISH Head Office & Factory 391-8 Gaumjung-Dong, Seongsan-Gu, Changwon, Gyeongnam, Korea TEL : +82 55 280 9114, FA : +82 55 282 9680 http : //www.hyundai-wia.com, E-mail : trade@hyundai-wia.com Seoul Office 10th Floor Landmark Tower 837-36, Yeoksam Dong, Gangnam-Gu, Seoul, Korea TEL : +82 2 2112 8452~63, FA : +82 2 2112 8400 Hyundai-Wia Machine America Corp. 450 Commerce Blvd. Carlstadt, New Jersey, U.S.A., 07072 TEL : +1 201 636 5600 FA : +1 201 636 5678 http ://www.hyundai-kiamachine.com E-mail : sales@hyundai-kiamachine.com Chicago Office 751 Landmeier Rd. Elk Grove Village, IL 60007 U.S.A. TEL : +1 847 640 8870(#201) FA : +1 847 640 8701 http ://www.hyundai-kiamachine.com E-mail : sales@hyundai-kiamachine.com L.A Office 11155 Knott Ave, Suit F, Cypress, CA 90630 U.S.A TEL : +1 714 373 5480 FA : +1 714 373 5485 http ://www.hyundai-kiamachine.com E-mail : sales@hyundai-kiamachine.com Argentina Office AV, Alicia Moreau de Justo 1848 of 4-6 Puerto Madero(C1107AFL). Buenos Aires, Argentina TEL : +54 11 4313 1917 FA : +54 11 4313 1929 http ://www.hyundai-kiamachine.com E-mail : sales@hyundai-kiamachine.com HYUNDAI-KIA EUROPE GmbH Kaiserleipromenade 5, D-63067 Offenbach,Germany TEL : +49 69 271 472700 FA : +49 69 271 472719 http ://www.hyundai-kia.de E-mail : sales@hyundai-kia.de Raunheim Service Center Kelsterbacher Str. 38-46 D-65479 Raunheim, Germany TEL : +49 6142 834 0 FA : +49 6142 834 100 http ://www.hyundai-kia.de E-mail : service@hyundai-kia.de Specifications are subject to change for improvement without notice. CHINA Beiging Office Room 908 No. 38 iaoyun Road, Chaoyang District, Beijing China 100027 TEL : +86 10 8453 9850~2 FA : +86 10 8453 9853 E-mail : sangho@hyundai-wia.com Sanghai Office Room 501 Ocular B/D, No.1366 Wu Zhong Road, 201103 Shanghai, Chian TEL : +86 21 3431 0370~2 FA : +86 21 3431 0376 E-mail : ymlee@hyundai-wia.com Guangzhou Office Room 906, International Finance Place, No.8 Huaxia Road, Pearl River New Town, Tianhe District, Guangzhou, China, 510623 TEL : +86 20 8550 6595~6 FA : +86 20 8550 6597 E-mail : junlee@hyundai-wia.com Chengdu Office Room 2103, Block A, Times Plaza, Zongfu Road, Chengdu, China 610016 TEL : +86 28 8665 5550 FA : +86 28 8665 2985 E-mail : junlee@hyundai-wia.com Wuhan Office Room 43-05, New World International Trade Building(Wuhan) No.568 Jianshe Avenue, Jianghan District, Hankou, Wuhan, Hubei 430022 TEL : +86-27 - 5952-3256~7 FA : +86-27 - 5952-3258 E-mail : daniel@hyundai-wia.com Qingdao Office Room 1207, Zhaoyin Building, 36 Hongkong Middle Road, Qungdao, shandong 266071, China TEL : +86-532 - 8667-9333~5 FA : +86-532 - 8667-9338 E-mail : yeslee@hyundai-wia.com SHENYANG Office Room 1304, Fortune Center No. 53 Bezhan Road Shenhs, D Strict Shenyang, China 110013 TEL : +86-24 - 3228-6640 FA : +86-24 - 3228-6642 E-mail : ijyang@hyundai-wia.com INDIA Chennai Office No.6, Papparambakkam Village, Thiruvallur Taluk & District - 602025 Tamilnadu, India TEL : +91-44 - 3717-6333 FA : +91-44 - 3717-6363 E-mail : bikehyk@hyundai-wia.com
Vertical Machining Center F400/500/650
High Speed & Productivity Vertical Machining Center Basic Structure Bed Slide Way Spindle Peripheral Device ATC & Magazine Machining Peripheral Equipment Easy to Operate HW-PGi F HW-TIDM HW-TM
HYUNDAI WIA MACHINE TOOL 2 3 Advanced Technology, Compact Design, Next-Generation Vertical Machining Center F400/500/650 The HYUNDAI-WIA Vertical Machining Center series was developed by applying the company' s accumulated know-how and cutting-edge technology. The series uses an angular contact ball bearing, a high-precision main spindle with heavy duty cutting power and minimal heat distortion, and achieves high accuracy, high rigidity and high precision.
BASIC STRUCTURE That Boasts the Largest Working Area, and The Highest Speed and Power FEM Analysis The technique to restrict the vibration in order to increase the processing roughness and degree is the most important factor in the bed structure. The bed designed by minimizing the vibration with FEM technique guarantees the secure processing degree and maintenance of high degree in a long time as it restricts the machine vibration during acc./dec. in a high speed.
HYUNDAI WIA MACHINE TOOL 4 5 Slide Way Pre-tensioned & Double Anchored Ball Screw As the precise pressurized ball screw minimizes the tensile strength by heat, the rigidity has been strongly supplemented with double anchor supporting way. Type of Direct Connection of Servo Motor As the precise pressurized ball screw minimizes the tensile strength by heat, the rigidity has been strongly supplemented with double anchor supporting way. Application of High Speed LM Guide As LM Guide has been adapted to the guide surface of each axis, a small frictional resistance contributes to save the quick trans-mission time and the excellent repeat location determination degree enables the product processing. Main Spindle Spindle Power & Torque Power (kw) F400 (8,000rpm) Torque (N.m) Power (kw) F400 (12,000rpm) Torque (N.m) 15 15kW (30min) 11 11kW (30min) 11 95N.m (30min) 70N.m (Cont.) 11kW (Cont.) 95 70 7.5 70N.m (30min) 45N.m (Cont.) 7.5kW (Cont.) 70 47 0 1,500 3,500 8,000 0 1,500 7,000 12,000 Spindle Speed (r/min) Spindle Speed (r/min) Power (kw) F500/650 (8,000rpm) Torque (N.m) F500/50, 650/50 (6,000rpm) Power (kw) Torque (N.m) By designing with ultra precision class and high speed of angular ball bearing for accelerating the main spindle, the max. rotation speed (8,000Rpm) of wide range of processing has been realized. 15 11 7.5 286N.m (30min) 143N.m (Cont.) 15kW (30min) 11kW (Cont.) 286 143 95 15 11 7.5 358N.m (30min) 179N.m (Cont.) 15kW (30min) 11kW (Cont.) 358 179 In particular, it has been designed in a structure tominimize the heat displacement of main spindle, and the operational stability has been increased with hydraulic tool lock system. 0 500 750 Spindle Speed (r/min) 6,000 18 9 8,000 0 400 600 Spindle Speed (r/min) 4,800 6,000 Specification of Main Spindle ITEM Taper Sp. Speed (rpm) Sp. Motor (Max./Cont.) Sp. Torque (Max./Cont.) Driving Method - r/min kw N.m - F400 NT #40 8,000 [12,000] 15/11 [11/7.5] 95/70 [70/45] Direct [Direct] F500 NT #40 8,000 15/11 286/143 Belt F500/50 F650 F650/50 NT #50 6,000 15/11 358/179 Belt NT #40 8,000 15/11 286/143 Belt [ ] : Option NT #50 6,000 15/11 358/179 Belt
Peripheral Device ATC & Magazine Magazine The selective areas of processing tools have been increased by adapting the magazine which is able to attach 24 ea tools as a standard and 30 ea tools as an option, and the exchanging time of tools has been decreased as a result of using the selective way of tools randomly. ATC The composite cam way of twin arm guarantees the high speed of tool exchange and dramatically decrease the specific cutting time. Specification of ATC ITEM No. of Tool Tool Shank Max. Tool Dia. (W.T) Max. Tool Dia. (W.O) Max. Tool Length Max. Tool Weight Tool Selection Method Tool Change T-T Time C-C F400 F500 F500/50 F650 F650/50 24EA [30EA] BT40 Ø90mm (3.5 ) Ø150mm (5.9 ) 300mm (11.8 ) 8kg (17.6 lb) RANDOM 1.85 sec 5.9 sec 24EA [30EA] BT40 Ø90mm (3.5 ) Ø150mm (5.9 ) 300mm (11.8 ) 8kg (17.6 lb) RANDOM 2.6 sec 6.6 sec 24EA BT50 Ø110mm (4.3 ) Ø200mm (7.9 ) 300mm (11.8 ) 15kg (33.1 lb) RANDOM 4 sec 8 sec 24EA [30EA] BT40 Ø90mm (3.5 ) Ø150mm (5.9 ) 300mm (11.8 ) 8kg (17.6 lb) RANDOM 2.6 sec 6.6 sec [ ] : Option 24EA BT50 Ø110mm (4.3 ) Ø200mm (7.9 ) 300mm (11.8 ) 15kg (33.1 lb) RANDOM 4 sec 8 sec
HYUNDAI WIA MACHINE TOOL 6 7 Machinig Machining Ability F400 FACE MILL Material JIS :S45C(Carbon steel) Tool diameter Cutting depth Cutting width Cutting speed Spindle rpm Feed rate Chip quantity Ø80 mm x 6F 3 mm 70 mm 286 mm/min 1,137 r/min 0.9 mm/rev 210 cc/min F500 FACE MILL Material JIS :S45C(Carbon steel) Tool diameter Cutting depth Cutting width Cutting speed Spindle rpm Feed rate Chip quantity Ø80 mm x 5F 5.5 mm 70 mm 236 mm/min 1,137 r/min 0.99 mm/rev 430 cc/min DRILL Material JIS :S45C(Carbon steel) Tool diameter Cutting depth Cutting speed Spindle rpm Feed rate Chip quantity Ø32 mm 40 mm 24 mm/min 268 r/min 0.2 mm/rev 43 cc/min DRILL Material JIS :S45C(Carbon steel) Tool diameter Cutting depth Cutting speed Spindle rpm Feed rate Chip quantity Ø43 mm 43 mm 27 mm/min 199 r/min 0.38 mm/rev 109 cc/min TAP. Material JIS :S45C(Carbon steel) Tap spec./pitch Cutting depth Cutting speed Spindle rpm Feed rate M24 x P3.0 40 mm 8 mm/min 106 r/min 3 mm/rev TAP. Material JIS :S45C(Carbon steel) Tap spec./pitch Cutting depth Cutting speed Spindle rpm Feed rate M42 x P4.5 42 mm 7 mm/min 53 r/min 4.5 mm/rev The above result might be different by types of processing circumstance Peripheral Equipment Chip Conveyor OP Hinge Belt Type Scraper Type Drum Filter Type Material SS41, 45C, Steel casting Chip Roughly cut chips Synthetic chips Show highly efficiency when treating lots of chips synthetic chip treatment, collective chips Material SS41, 45C, Steel casting Chip Chips shortly cut and out Facilitate to treat chip shortly cut and out, facilitate to forward chips with 90 degree Material AL, casting, non-metal Chip Chips in low density and fine powder Have advantage in precision when processing aluminum because chips are not introduced to coolant nozzle Touch Sensor Tool OP TLM OP Rigid Tapping The machining criteria of workpiece is measured through interface signal between instrument unit (Touch Sensor Tool) and workpiece, cooridinate value is automatically set in the basic coordinate system. The tool broken, wear-out degree and offset value can be automatically measured, ensuring working convenience. The rigid tapping adapted as a standard maximizes the improvement of productivity with prompt and correct tap processing. In addition, it has excellent in processing degree and extends the life cycle of tap tools.
Programming system for creating CNC programs easily. Easy to Operate HYUNDAI WIA's smart system is capable of more rapid program setting and readily maintaining, and is optimal to the productivity of machine. M-Code List OP Calculator OP Product Guide OP
HYUNDAI WIA MACHINE TOOL 8 9 HW-PGi F Programming Guide i for Fanuc System (OP F32i-STD) HW-TIDM : Tool ID Manager OP Tool ID System Diagram Data Carriers Processor Read/Write Head Tools Realistic 3D solid animation 3D simulation Customer oriented tool ID management system (ID MAP setting function) RS232C/PROFI DP protocol Tool counter function Tool management automation Example of easy programming Readily programing with interactive type, without code HW-TM : Tool Monitoring System OP Engraving Cycle when the character is only entered without separate program is programmed automatically. HW-TM Real-time cut monitoring 2 Channel screen display Self learning for machining amount 3 stage of status monitoring (wear/break/no-load) If you order these options, Please contact sales person
Specifications External Dimensions unit : mm(in) F400 2833 (111.5) 2498 (98.3) 2287 (90) REAR CHIP CONVEYOR 1163 (45.8) 618 (24.3) 1950 (76.8) 60 (2.4) LEFT SIDE CHIP CONVEYOR 884 (34.8) 548 (21.6) 1950 (76.8) 1860 (73.2) 34 (1.3) 2979 (117.3) 315 2450 (96.5) 90 (3.5) 1167 (45.9) (12.4) 2540 (100) F500 2573 (101.3) 523 (20.6) REAR CHIP CONVEYOR 1900 (74.8) 205 (8.1) LEFT SIDE CHIP CONVEYOR 815 (32.1) 2800 (110.2) 378 (14.9) 340 (13.4) 1560 (61.4) 1197 (47.1) 1900 (74.8) 2057 (81) 2670 (105.1) 613 (24.1) 1087 (42.8) 3887.4 (153) 2800 (110.2)
HYUNDAI WIA MACHINE TOOL 10 11 External Dimensions unit : mm(in) F650 755 (29.7) 2810 (110.6) 2475 (97.4) 2110 (83.1) REAR CHIP CONVEYOR 2055 (80.9) LEFT SIDE CHIP CONVEYOR 842 (33.1) 1705 (67.1) 350 (13.8) 3118 (122.8) 3202 (126.1) 2356 (92.8) 1004 (39.5) 4504 (177.3) 3500 (137.8) Tool Shank unit : mm(in) BT40 TOOL BT50 TOOL 10 22.6 15 35.4 M16 45 16.1 M24 45 Ø63 Ø44.45 25.7 Ø100 Ø69.85 7/24 Ø10 Ø15 7/24 Ø17 Ø23 P8 60 16.6 27 2 65.4 6 29 35 Ø4 Ø3 11.5 P5 3 Ø5 60 3 23.2 38 101.8 10 35 45 Ø5.7 16 7 Ø8 Sp. Thru Coolant Pull Stud Bolt (P40T-1) Sp. Thru Coolant Pull Stud Bolt (P50T-1)
Specifications unit : mm(in) Table Dimensions Detail T-Slot Detail T-Slot Detail T-Slot F400 F650 F500 24Tool F500/50
HYUNDAI WIA MACHINE TOOL 12 13 Specifications Specifications ITEM F400 F500 F500/50 F650 F650/50 Table Table Size mm(in) 1,000 460 1,200 500 1,600 650 (39.4 18.1 ) (47.2 19.7 ) (63 25.6 ) Maximum Load Capacity kg(lb) 600 (1,323) 800 (1,764) 1,300 (2,866) Spindle Taper - NT #40 NT #50 NT #40 NT #50 Spindle RPM r/min 8,000 [12,000] 8,000 6,000 8,000 6,000 Spindle Spindle Power Output (Max./Cont.) kw(hp) 15/11 [11/7.5] 15/11 15/11 15/11 15/11 (20/15 [15/10]) (20/15) (20/150) (20/15) (20/150) Spindle Torque (Max./Cont.) N.m 95/70 [70/45] 286/143 358/179 286/143 358/179 Spindle Driving Method - Direct [Direct] Belt Travel (/Y/Z) Distance from Table Surface to Sp. mm(in) mm(in) 800/460/520 1,060/510/635 1,100/510/635 1,400/660/635 (31.5 /18.1 /20.5 ) (31.5 /18.1 /20.5 ) (43.3 /20.1 /25 ) (55.1 /26 /25 ) 130~650 (5.1 ~25.6 ) 150~785 (5.9 ~30.9 ) Feed ATC Tank Capacity power Supply Machine NC Distance from Column to SP. center mm(in) Rapid Feed Rate (/Y/Z) m/min Cutting Feed Rate (/Y/Z) m/min Slide Type - Number of Tools EA Tool Shank - Max. Tool Dia. (W.T / W.O) mm(in) Max. Tool Length mm(in) Max. Tool Weight kg(lb) Tool Selection Method - T-T sec Tool Change Time C-C sec Coolant Tank l(gel) Lubricating Tank l(gel) Hydraulic Tank l(gel) Air Consumption (0.5MPa) l/min (gel/min) Electric Power Supply KVA Thickness of Power Cable Sq Voltage V/Hz Floor Space (L W) mm(in) Height mm(in) Weight kg(lb) Controller - 475 (18.7 ) 615 (24.2 ) 765 (30.1 ) 32/32/32 36/36/30 10 15 LM Guide Roller Guide LM Guide Roller Guide 24 [30] 24 24 [30] 24 BT40 BT50 BT40 BT50 Ø90/Ø150 (3.5 /5.9 ) Ø110/Ø200 (4.3 /7.9 ) Ø90/Ø150 (3.5 /5.9 ) Ø110/Ø200 (4.3 /7.9 ) 300 (11.8 ) 8 (17.6) 15 (33.1) 8 (17.6) 15 (33.1) Random 1.85 2.6 4 2.6 4 5.9 6.6 8 6.6 8 300 (79.3) 350 (92.5) 2 (0.5) 4 (1.1) 11 (2.9) - 15 (4) - 15 (4) 250 (66) 110 (29.1) 125 (33) 110 (29.1) 25 30 Over 25 220/60 (200/50) 2,945 1,860 2,800 2,670 3,500 3,118 4,620 3,118 (115.9 73.2 ) (110.2 105.1 ) (137.8 122.8 ) (181.9 122.8 ) 2,833 (111.5 ) 3,096 (121.9 ) 2,810 (110.6 ) 3,050 (120.1 ) 5,100 (11,244) 7,700 (16,976) 9,500 (20,944) HYUDAI WIA FANUC i Series [FANUC 32i-A] Specifications are subject to change for improvement without notice. [ ] : Option
Standard & Optional Spindle 8,000rpm(15/11kW) DIRECT/BELT 12,000rpm(11/7.5kW) DIRECT Spindle Cooling System ATC 24 ATC Extension 30 Tool Shank Type BT40 U-Center D'andrea 45 Stud Bolt Collet Change 60 90 Table & Column APC Tap Type Pallet T-Slot Pallet NC Rotary Table High Column Coolant System Std. Coolant (Nozzle) Bed Flushing Coolant 20bar 30bar Spindle Thru Coolant 70bar, 15l 70bar, 30l Top Cover (Only for Spindle Thru Coolant) Jet Coolant Gun Coolant Side Oil Hole Coolant Air Gun Spindle Air Blow Tool Measuring Air Blow (Only for TLM) Air Blow for Automation Thru MQL Device (Without MQL) Coolant Chiller Power Coolant System (For Automation) Chip Disposal Coolant Tank 300l Cabin Screw Chip Conveyor Front(Left) Chip Conveyor (Hinge/Scraper) Left(Rear) Special Chip Conveyor (Drum Filter) Standard(180l) Swing(200l) Chip box Large Size(330l) Customized Safety Device Total Splash Guard S/W Machine Guidance HWTM (Tool Monitoring System) DNC Software Dialogue Program Tool ID Manager Spindle Heat Distortion Compensation Spindle Warm up Function ETC Tool Box Customized Color Need Munsel NO. CAD&CAM Software F400 : Standard : Option : Prior Consultation : Non Application - : Impossible Electric Device F400 Call Light Call Light Call Light & Buzzer Work Light Electric Cabinet Light Door Inter-Lock Remote MPG 1 Color : 3 Color : 3 Color : B MPG Spindle Load Meter Spindle RPM Meter FANUC FANUC FANUC SIEMENS SIEMENS SIEMENS Work Counter Total Counter Tool Counter Digital Digital Digital Multi Tool Counter Electric Circuit Breaker AVR (Auto Voltage Regulator) 6ea 9ea Transformer & Cable Flash Memory Card Auto Power Off Back up Module for Black out Measuring Device 25kVA Air Zero Work Measuring Device TACO SMC TLM (Marposs/Renishaw/Bloom)" Tool Broken Detective Device Linear Scale Touch Laser /Y/Z Axis Coolant Level Sensor (Only for Chip Conveyor) Enviornment Air Conditioner Dehumidifier Oil Mist Collector Oil Skimmer (Only for Chip Conveyor) MQL (Minimal Quantity Lubrication) Fixture & Automation Auto Door Std. High Speed Auto Shutter (Only for Automatic System) Sub O/P NC Rotary TableI/F Control of Additional Axis External M Code 4ea Automation Interface I/O Extension (In & Out) Single 1Axis 16Contact Channel 2Axis 32Contact Hyd. Device Std. Hyd. Unit 65bar/30l 45bar Hyd. Unit for Fixture 70bar 100bar Customized The specifications as above will only serve as a reference.
HYUNDAI WIA MACHINE TOOL 14 15 Spindle 8,000rpm(15/11kW) BELT 6,000rpm(15/11kW) BELT 10,000rpm(18.5/14kW) BELT Std.rpm Spindle Cooling System 10,000rpm ATC 24 ATC Extension 30 BT40 Tool Shank Type BT50 U-Center D'andrea 45 Stud Bolt Collet Change 60 90 Table & Column APC Tap Type Pallet T-Slot Pallet NC Rotary Table High Column 300mm Coolant System Std. Coolant (Nozzle) Bed Flushing Coolant 20bar 30bar Spindle Thru Coolant 70bar, 15L 70bar, 30L Top Cover (Only for Spindle Thru Coolant) Jet Coolant Gun Coolant Side Oil Hole Coolant Air Gun Spindle Air Blow Tool Measuring Air Blow (Only for TLM) Air Blow for Automation Thru MQL Device (Without MQL) Coolant Chiller Power Coolant System (For Automation) Chip Disposal Coolant Tank 350l Front(Left) Chip Conveyor (Hinge/Scraper) Left(Rear) Special Chip Conveyor (Drum Filter) Standard(180l) Swing(200l) Chip box Large Size(330l) Customized Safety Device Total Splash Guard S/W Machine Guidance HWTM(Tool Monitoring System) DNC Software Dialogue Program Tool ID Manager Spindle Heat Distortion Compensation Spindle Warm up Function ETC Tool Box Customized Color Need Munsel NO. CAD&CAM Software F500 F500/50 F650 F650/50 : Standard : Option : Prior Consultation : Non Application - : Impossible Electric Device F500 F500/50 F650 F650/50 Call Light 1 Color : Call Light 3 Color : Call Light & Buzzer 3 Color : B Work Light Electric Cabinet Light Door Inter-Lock Remote MPG MPG Spindle Load Meter Spindle RPM Meter FANUC FANUC FANUC SIEMENS SIEMENS SIEMENS Work Counter Digital Total Counter Digital Tool Counter Digital Multi Tool Counter 6ea 9ea Electric Circuit Breaker AVR (Auto Voltage Regulator) Transformer & Cable 25kVA 30kVA Flash Memory Card Auto Power Off Back up Module for Black out Measuring Device Air Zero TACO SMC Work Measuring Device TLM Touch (Marposs/Renishaw/Bloom)" Laser Tool Broken Detective Device Linear Scale /Y/Z Axis Coolant Level Sensor (Only for Chip Conveyor) Enviornment Air Conditioner Dehumidifier Oil Mist Collector Oil Skimmer (Only for Chip Conveyor) MQL (Minimal Quantity Lubrication) Fixture & Automation Auto Door Std. High Speed Auto Shutter (Only for Automatic System) Sub O/P NC Rotary TableI/F Single Channel Control of Additional Axis 1Axis 2Axis External M Code 4ea Automation Interface I/O Extension (In & Out) 16Contact 32Contact Hyd. Device 40bar/15l Std. Hyd. Unit 70bar 100bar Customized The specifications as above will only serve as a reference.
Controller HYUNDAI WIA FANUC i Series Axis control / Display unit Controlled axes 3 (/Y/Z) axes Simultaneous 3 axes (G00 & G01 : 3 axes) controllable axes (G02 & G03 : 2 axes) axis : 0.001mm (0.0001") Least input increment Y axis : 0.001mm (0.0001") Z axis : 0.001mm (0.0001") axis : 0.001mm (0.0001") Least command increment Y axis : 0.001mm (0.0001") Z axis : 0.001mm (0.0001") Inch/Metric conversion G20 / G21 Interlock Each axis / All axes Machine lock All axis Emergency stop Stored stroke check1,2,3 Follow-up Servo off +/- 0~9999 pulse Backlash compensation (rapid traverse & cutting feed) Position switch Stored pitch error compensation LCD/MDI 8.4 color LCD Operation Automatic operation (memory) MDI operation Search function Sequence, Program Program restart Dry run Single block Buffer register Handle interrupt Feed functions Manual jog feed Rapid, Jog, handle Manual handle feed-rate x1, x10, x100 Feed command F code feedrate direct command Feedrate override 0~200% (10% Unit) Jog feed 0~5,000 mm/min (197 ipm) Rapid traverse override F0, F25%, F50%, F100% Override cancel Rapid traverse bell-shaped acceleration/deceleration Auto corner override Program input & Interpolation functions Label Skip Control in/out Positioning/Linear/Circular Interpolation functions (G00/G01/G02/G03) Exact stop mode/exact stop G61 / G09 Program input & Interpolation functions Dwell G04, 0~9999.9999sec Helical interpolation Threading / Synchronous feed Manual reference point return G28 Reference point return G27 Reference point return check G30 2nd Reference point return 3rd Reference point return 4th Reference point return Program stop/end M00, M01 / M02, M30 EIA RS-244/ISO 840 Tape code (Automatic recognition) Optional block skip 1 EA Max. programmable +/- 9999.9999 (+/- 8digits) dimensions Program number O4 digit Absolute/incremental G90 / G91 command Decimal point input Plane selection G17,G18,G19 Work coordinate G52~G59 system setting Work coordinate preset Additional work 48 pairs coordinate system Manual absolute "On" fixed Programmable data input G10 Sub program call 4 levels of nesting Custom macro Addition to custom macro #100~#199, #500~#999 common variables Circular interpolation Canned cycle G73, G74, G76, G80~G89 Optional chamfering/ corner R Skip function G31 Automatic coordinate system setting Coordinate system rotation Programmable mirror image Single direction positioning G60 Tool offset / Message / External data input Machine zero point shift Cylindrical interpolation AI advanced G5.1 preview control Polar coordinate command Auxiliary / Spindle functions Miscellaneous function Miscellaneous function lock Spindle speed command Spindle speed override Spindle orientation Rigid tapping Tool function Cutter compensation C Tool length measurement Tool length compensation Tool offset amount Tool offset pairs M2 digits S5 digits, binary output 50%~120% (10% unit) Tool functions / Tool compensation Max. T8 digits G40 G42 G43, G44, G49 G45~48 (+/- 6 digits) 400 pairs Tool life management Data input / Output & Editing functions Reader/Puncher interface RS232C Memory card input/output Part program storage length 1280m (512Kbyte) Registered programs 400 ea Memory lock Back ground editing Extended part program Copy, Move, Change of editing NC program Setting, display, diagnosis Self-diagnosis function History display Help function Run hour / Parts count display Actual cutting feedrate display Spindle / Servo setting screen Multi-language display Erase LCD screen display Option Additional 1 Axis Manual Guide i Dynamic graphic display Optional block skip add AI contour control (AICC) Data server FAST Ethernet DNC operation Alarm & operator message Screen saver With 10.4 color LCD 9 EA (Application can be limited) Figures in inch are converted from metric values. Design and specifications subject to change without notice.
HYUNDAI WIA MACHINE TOOL 16 17 FANUC 32i-A Axis control / Display unit Controlled axes Simultaneous controllable axes Least input increment Least command increment Inch / metric conversion Interlock Machine lock Emergency stop Stored stroke check 1 Mirror image Follow-up Servo off Backlash compensation Position switch Stored pitch error compensation LCD/MDI Operation Automatic operation (memory) MDI operation Search function Program restart Dry run Single block Buffer register Feed functions Manual jog feed Manual handle feed rate Feed command Feedrate override Jog feed Rapid traverse override Override cancel Rapid traverse bell-shaped acceleration/deceleration Program input & Interpolation functions Label skip Control in/out Interpolation functions Exact stop mode / Exact stop Dwell Helical interpolation 4 (, Y, Z, B) axes 3 axes (G00 & G01 : 3 axes, G02 & G03 : 2 axes) 0.001 mm (0.0001 )/1 deg 0.001 mm (0.0001 )/1 deg G20 / G21 Each axis / All axes All axes Over-travel +/- 0~9999 pulse (rapid traverse & cutting feed) 10.4 color LCD Sequence, program Rapid, jog, handle x1, x10, x100 F code feedrate direct command 0~200% (10% unit) 0~5,000 mm/min (197 ipm) F0, F25%, F50%, F100% Positioning/Linear/Circular (G00/G01/G02/G03) G61 / G09 G04, 0~9999.9999sec Program input & Interpolation functions Threading/synchronous feed Manual reference point return 1st Reference point return G28 Reference point return check G27 2nd Reference point return G30 Program stop/end M00, M01 / M02, M30 EIA RS-244 / ISO 840 Tape code (Automatic recognition) Optional block skip 1 ea Maximum programmable +/- 9999.9999 (+/- 8 digits) dimensions Program number O4 digit Absolute and incremental command G90 / G91 Decimal point input Plane selection G17, G18, G19 Work coordinate system setting G52~G59 Additional work coordinate system 48 pairs Manual absolute ON fixed Programmable data input G10 Sub program call 4 levels of nesting Custom macro B #100 to #199 Circular interpolation by radius R Canned cycle G73, G74, G76, G80 ~ G89 Optional chamfering/corner R Skip function G31 Automatic coordinate system setting Coordinate system rotation Programmable mirror image Auxiliary / Spindle functions Miscellaneous function Miscellaneous function lock Spindle speed command Spindle speed override Spindle orientation Rigid tapping Tool function Cutter compensation C Tool length compensation Tool offset amount Tool offset pairs M2 digits S5 digits, binary output 50% ~ 120% (10% unit) Tool functions / Tool compensation Max. T8 digits G40~G42 G43, G44, G49 +/- 6 digits 99 pairs Tool life management Data input/output & Editing functions Reader/Puncher interface RS232C Data input/output & Editing functions Memory card input/output Embedded ethernet Part program storage length Registered programs Memory lock Back ground editing Extended part program editing 10 Mbps 320 m (128Kbyte) 125 ea Copy, move, change of NC program External message Setting, display, diagnosis Self-diagnosis function History display Alarm & operator message Help function Run hour / Parts count display Actual cutting feedrate display Graphic display Spindle / Servo setting screen Multi-language display Erase CRT screen display Screen saver Option Additional 1 axis Addition to custom macro #500 to #999 common variables Polar coordinate command / interpolation Cylindrical interpolation Single direction positioning G60 Tool length measurement 3rd and 4th Reference G30P3, G30P4 point return External data input Remote buffer Ethernet 100 Mbps Data server Ai contour control (AICC) Ai nano contour control (AI nano CC) Manual Guide i Optional block skip add 9 ea (Application can be limited) Handle interrupt Manual handle feed 3 unit Part program storage 640 m (256 Kbyte) / 1280 m (512 Kbyte) Dynamic graphic display DNC operation KDNC (S/W) Figures in inch are converted from metric values. Design and specifications subject to change without notice.
ENERGY SAVING & ECO FRIENDLY All machine tools of HYUNDAI WIA are designed to consider environmental safety and energy saving Minimum practice enabling coexistence of humankind and machines... HYUNDAI WIA will lead for this This Catalogue made by recycle paper
HYUNDAI WIA MACHINE TOOL 18 19 MQL : Minimal Quantity Lubrication Energy Saving Auto Power Off When processing products needed long hours such as PPL or MOLD, power supply is automatically shut off by programmed setting, which reduces power consumption. [ Automatic Power Off Display ] When the machine is not operated longer than set time, a SCREEN-SAVER is activated and saves power consumption. Coolant (Wet Cutting) Lubricating Cooling Chip Disposal Minimal Mist Oil Compressed Air MQL Cutting (Semi-Dry) Power Consumption Monitor MQL is an echo-friendly product responding to Kyoto Protocol, and capable of processing with small coolant (2~20CC/H). The use of MQL has not introduce condensation and generate dust powder even in processing with extra high speed. It also penetrates up to the tip of tools, which reduces heat generation and makes excellent lubrication. (Tools life and cutting speed are increased more than 1.5 to 3 times) ECO System Accumulated power consumption of servo motor is displayed on OP screen, thru which you can determine real time power consumption. Oil Skimmer Economy Lubrication System It is a device recovering lubricant mixed in coolant, which extends coolant life and provides comfortable working environment and operating cost saving. Mist Collector Mist of fine particles (1~10 μm ) generated from processing will contaminate working area and ambient air, and if inhaled to human body, cause occupational disease, and also reduction of machines life and productivity. The collector catches and removes this mist to make comfortable and fresh working environment. The use of oil saving coolant supplier provides lubricant only when the forwarding axis is moving, which saves 30% of lubricant consumption compared to existing system.