Manufacturing Programme Construction industry Concrete release agents Chemo-technical maintenance products Lubricating fluids Plain and roller bearing greases Adhesive lubricants Pastes and grease pastes Application equipment for SYSTEM REINER cartridges One cannot imagine the construction industry without lubricants and release agents. In the diverse areas of application, whether it be in gravel and sand pits, quarries, in road works or in civil and structural engineering, all construction machinery and equipment requires constant care and maintenance. Special lubricants and release agents play a vital role in this as well as the specialist advice. For only top quality lubricants minimize wear and provide for optimum working life of the equipment, at the same time reducing lubricant consumption. The special products made by FUCHS LUBRITECH match these demanding requirements and have proven this world-wide. The high quality of the FUCHS LUBRITECH products is the result of intensive research and development in close cooperation with customers as well as with machinery and plant manufacturers. Thus attention is paid to the ecological integrity of the ingredients used, both in the formulation of new lubricants and the further development of proven products. The FUCHS LUBRITECH quality control system, which is certified in accordance with DIN/ISO 9000, embraces all areas of the company and is an integral part of the operational cycles. As a result we fulfill or exceed the high expectations of our customers in the construction industry worldwide.
Temperature range in C Available as spray Concrete release agents.................. BETONEX GRÜN 1519 Biogeneous maintenance fluid for mixers, construction machinery and equipment BETONEX SP-1 3033 Highly efficient maintenance fluid for ready-mixed concrete vehicles, concrete pumps etc. BETONEX SP-3 3099 High performance maintenance fluid for mixers, concrete pumps and equipment BITEEREX 1 3098 Bitumen release agent BITEEREX 2 2400 Bitumen release agent concentrate BITEEREX GRÜN 1090 Biogeneous bitumen release agent concentrate SOK 128 1049 up to +100 Hot-release agent for the production of exposed concrete in precast concrete plants SOK 912 1053 up to +100 Hot-release agent for the production of exposed concrete in precast concrete plants SOK AQUA 3308 Release agent emulsion for precast concrete plants SOK BTM E 2477 former Betontrennmittel E Universal release agent for building construction SOK FACTORY 2471 up to +50 Release agent for high-quality concrete surfaces in building construction, also recommended as mixer protection SOK PERFEKT 1089 up to +50 Release agent for high-quality concrete surfaces in building construction SOK STANDARD 1052 up to +100 Release agent for high-quality concrete surfaces in building construction, also recommended as mixer protection SOK ULTRA 1031 up to +130 Hot-release agent for the production of exposed concrete in precast concrete plants SOK WAX 1 / 2 / 3 up to +50 Pasty release agent for special applications Chemo-technical maintenance products.................. CTP B-FE 2105 former BETONLÖSER FE Acidic cleaning agent for removing concrete and mortar residues CTP D ECO 2447 former DECORDYN ECO Rapidly biodegradable corrosion protection concentrate CTP D-HF 91 1899 former DECORDYN HF 91 Universal corrosion protection wax for external conservation CTP D-W 2310 former DECORDYN W Conservation fluid CTP M 5080 former METABLANC Metal rapid cleaner, e.g. for cleaning of brakes CTP M ECO 1836 former METABLANC ECO universal cleaner, made of rapidly degradable resources CTP M-W 2119 former METABLANC W Sprayable cleaner for motor vehicles
viscosity at 40 C [mm 2 /s] Temperature range in C Solid lubricant Available as spray Lubricating fluids CEDRACON CEDRACON K CEDRACON S 3 ECO-HYD S-range FERROFORM 3 R FERROFORM ECO LOCC FERROFORM LOCC GEARMASTER CLP-range.................. 1331 Mineral oil -35 / +65 Graphite Wire rope and conservation fluid with graphite 1333 Mineral oil -30 / +70 Wire rope and conservation fluid with solvent 1310 Mineral oil -40 / +80 Graphite lubricant for wire rope conservation, with solvent 22-68 synthetic -30 / +150 Rapidly biodegradable hydraulic oils, based on synthetic ester, HLP-E 22-68 1831 Mineral oil Graphite Rust loosener with graphite 1443 synthetic Biodgradable rust loosener based on synthetic fluids 1830 Mineral oil Mineral oil based rust loosener 68-1000 Mineral oil -15 / +120 Mineral-oil based high performance gear oils, CLP 68-1000 GEARMASTER CLPF-range 100-680 Mineral oil -5 / +120 MoS 2 High performance gear oils containing MoS 2 GEARMASTER ECO-range 68-1000 synthetic -30 / +150 high performance gear oils, based on synthetic ester, CLP-E 68-1000 GEARMASTER PGP-range 68-1000 Polyglycol -20 / +150 High performance gear oils, based on polyglycols, CLP-PG 68-1000 GEARMASTER SYN-range 68-680 PAO -20 / +150 High performance gear oils on PAO base, CLP-HC 68-1000 GERALYN FLUID 1289 70 White oil -20 / +120 Food grade lubricating fluid, water resistant, odourless, tasteless KOMPRANOL 1002 1335 11 Mineral oil -40 / +80 Air tool oil (conservation/lubrication) KOMPRANOL GRÜN 3090 20 synthetic -60 / +90 Biodegradable air tool oil KOMPRANOL PF 84 1692 20 synthetic -60 / +90 former DRUCKLUFTÖL PF 84 Synthetic air tool oil with corrosion and wear protection additives STABYLAN 2001 1337 215 semi-synthetic -15 / +150 Semi-synthetic chain lubricant STABYLAN 3001 1347 160 synthetic bis +220 Fully synthetic, high-temperature chain lubricant STABYLAN ECO W 10 116 18 synthetic -30 / +110 Biodegradable synthetic oil with white solid lubricants for levers, joints and chains STABYLAN SI 210 6368 Silicone oil bis +250 Silicone lubricant, e.g. for lubrication of screeds on road pavers; cockpit spray STABYLAN SI 310 140 11000 Silicone oil -40 / +200 High viscous silicone oil based lubricating, release and maintenance fluid
Classification NLGI-grade Thickener Temperature range in C viscosity at 40 C [mm 2 /s] Solid lubricant Available as spray Plain and roller bearing greases GEARMASTER LI 400 3286 00 Li-X semi-synthetic -30 / +140 180 GP00N-30 Semi-synthetic fluid grease GEARMASTER ZSA 1867 000 Lithium Mineral oil -40 / +120 45 GP000K-40 Smooth lithium soap-based fluid grease GERALYN 00 / 1 / 2 00, 1 and 2 Al-X White oil -20 / +120 70 white GF00G-20 / KF1K-20 / KF2K-20 Food grade grease, NSF-H1 registered GERALYN P1 / P2 0/1 and 2 inorganic synthetic -30 / +150 770 / 440 white KF1P-30 / KF2P-30 Fully synthetic food grade grease LAGERMEISTER 3000 PLUS 2874 2 Calcium semi-synthetic -30 / +120 800 KP2K-30 High performance EP-longlife grease, calcium-soap based, salt water resistant LAGERMEISTER BF 1 / BF 2 1 and 2 Lithium Mineral oil -20 / +120 200 KP1K-20 / KP2K-20 Lithium-soap based EP longlife grease LAGERMEISTER CA 95/100 N 1272 2 Calcium Mineral oil -30 / +60 90 Graphite former CEDRACON 95/100 N MF2C-30 Water resistant lubricating grease with graphite, calcium-soap based, for underwater applications LAGERMEISTER CX-EP 2 2997 2 Ca-X Mineral oil -30 / +150 120 KP2N-30 Calcium complex-soap based lubricating grease LAGERMEISTER ECO 2 5001 2 Calcium native -15 / +80 36 white KPF2E-15 EP multi-purpose grease LAGERMEISTER EP 2 1267 2 Lithium Mineral oil -20 / +130 200 KP2K-20 Lithium-soap based EP longlife grease LAGERMEISTER HDG 00/HDG 2 00 and 2 Ca-X Mineral oil -20 / +140 350 white K/GPF00K-30 / KPF2K-20 High performance grease with white solid lubricants; HDG 00 for crusher spider bearings LAGERMEISTER LX-EP 2 3275 2 Li-X Mineral oil -30 / +160 120 KP2P-30 Lithium complex-soap grease, mineral oil based LAGERMEISTER SL 1208 2/3 Lithium Mineral oil -20 / +120 100 K2K-20 Lithium-soap based EP multi-purpose grease LAGERMEISTER SLG 1209 2 Lithium Mineral oil -30 / +120 100 Graphite KF2K-30 Lithium-soap based EP multi-purpose grease with graphite LAGERMEISTER TS 1222 2 Lithium semi-synthetic -30 / +140 800 KP2N-30 Semi-synthetic high performance grease for anti-friction bearings LAGERMEISTER WHS 2002 1169 1/2 Lithium Mineral oil -20 / +120 320 white KPF2K-20 High-performance grease with white solid lubricants, e.g. for lubrication of telescope pads on mobile cranes LAGERMEISTER XXL 3500 2 Special Mineral oil -30 / +160 180 KP2P-30 Special longlife grease with an extremely wide application area, wheel bearing grease STABYL 300 AL 1 / 300 AL 2 1 and 2 Al-X Mineral oil -20 / +150 320 Graphite KPF1P-20 / KPF2P-20 Aluminium complex-soap based EP lubricating grease with graphite, especially for asphalt mixing plants STABYL AX 1 / AX 2 1 and 2 Al-X Mineral oil -20 / +150 320 former ALMETYN 1 / 2 KP1P-20 / KP2P-20 Aluminium complex-soap based EP lubricating grease STABYL AX 3 1826 3 Al-X Mineral oil -15 / +150 320 former ALMETYN 3 KP3P-15 Aluminium complex-soap based EP lubricating grease STABYL ECO 00 2172 00/000 Li/Ca synthetic -40 / +120 100 KPE00/000K-40 EP fluid grease for central lubricating systems STABYL ECO EP 2 2375 2 Li/Ca synthetic -40 / +120 105 KPE2K-40 EP universal grease STABYL ECO S 12 G 3898 1/2 Lithium synthetic -40 / +130 320 Graphite KPFE2/1K-40 EP universal grease with solid lubricants STABYL HD 1325 2 Lithium Mineral oil -10 / +120 1000 MoS 2, Graphite KPF2K-10 Lithium-soap based EP heavy duty lubricating grease STABYL LT 50 1846 2 Lithium synthetic -50 / +130 105 KPHC2N-50 Fully synthetic, low-temperature grease STABYL MO 500 1233 2/3 Lithium Mineral oil -25 / +120 110 MoS 2 former MOPLATTYN 500 KPF2K-25 Lithium-soap based longlife grease containing MoS 2 URETHYN E 2 1276 2 organic synthetic -20 / +200 80 KPE2S-20 Fully synthetic polyurea high temperature lubricating grease
Classification NLGI-grade Thickener Temperature range in C viscosity at 40 C [mm 2 /s] Solid lubricant Available as spray Plain and roller bearing greases URETHYN E/M 1 / E/M 2 URETHYN MP 1 / MP 2 1 and 2 organic semi-synthetic -20 / +180 150 KPE1R-20 / KPE2R-20 Semi-synthetic polyurea high temperature lubricating grease 1 and 2 organic Mineral oil -20 / +180 460 KP1R-20 / KP2R-20 Mineral-oil based high temperature polyurea lubricating grease; e.g. for road pavers; Vögele approval Adhesive lubricants CEPLATTYN 300 CEPLATTYN ECO 300 CEPLATTYN KG 10 HMF.................. 1119 1/2 Al-X Mineral oil -30 / +250 1300 Graphite Graphite paste with high pressure and adhesive additives, free of bitumen, heavy metals and solvents 1161 1 Calcium native -20 / +80 Graphite adhesive lubricant with solid lubricants, water resistant and corrosion protection 1162 0/00 Al-X Mineral oil -10 / +140 500 Graphite OGPF00N-10 Sprayable adhesive lubricant, free of heavy-metal and chlorine, high load carrying capacity, water resistant Pastes and grease pastes.................. gleitmo 100 gleitmo 160 neu gleitmo 165 gleitmo 805 gleitmo WSP 5000 gleitmo WSP 5040 MEISSELPASTE 721 2 Mineral oil -35 / +400 MoS 2 etc. MoS 2 -based assembly paste 1494 2 Al-X Mineral oil -30 / +1100 Combination Universal copper paste for bolt joints, bolts, hinges and couplings 724 2 synthetic -40 / +1200 150 Combination Metallurgically compatible anti-seize paste 115 2 Lithium Mineral oil -20 / +110 185 white White mineral oil based high performance grease paste, e.g. for incremental launching 370 2 Spec. Ca-X Mineral oil -20 / +140 350 white KPF2N-20 High performance grease with white solid lubricants 377 2 Spec. Ca-X Mineral oil -20 / +140 250 white Universal lubricating and assembly paste with white solid lubricants 1424 2 Al-X Mineral oil -20 / +1100 320 Combination Special lubricant for socket tools and bushings of hydraulic hammers, Atlas Copco approval Application equipment for SYSTEM REINER cartridges HD Single-handed grease gun HD Two-handed grease gun DFP 500/FLT pneumatic press For simple, clean and accurate lubrication of high-quality machines. TÜV and GS approvals. Up to 150 bar pressure in one hand operation Complete discharge by special piston shape For simple, clean and accurate lubrication of high-quality machines with long lubricating lines, large quantities of lubricant and large volumes of lubricant per stroke. Obtainable pressure 400 bar. TÜV and GS appovals. Weight: only 950 g Maximum obtainable pressure: 400 bar Complete discharge by special piston shape The professional pneumatic press is the ideal solution for lubricating all kinds of machinery, commercial vehicles and construction machinery. It is supplied with reinforced rubber hose and 4-jawed professional nozzle. Practical single-hand operation Controlled grease feed using a single push: Approx. 1.2 cm³/stroke at 250 bar Input pressure 2-10 bar, transmission ratio 1:30 Connecting thread M 10x1
Zeitzen-Mathieu range 0 Release Agents - Cleaner and release agents for bitumen and concrete in building construction/civil engineering and pre-cast concrete plants. 1 Adhesive Lubricants - For open gear lubrication, wire rope and chain lubrication 2 Lubricating Greases - Different greases for plain and anti-friction bearings. Rail-, wheel flange and switch lubricants. Food grade greases. 3 Lubricating Fluids - Lubricating fluids for lifetime and loss lubrication of chains, wire ropes and gears 4 Pastes and Grease Pastes - MoS 2 -pastes, white lubricating pastes, grease pastes and high-temperature pastes. 5 Solid Film Lubricants - Solvent or water-based lubricants reducing friction and wear. Extremely resistant against pressure, high and low temperatures. 6 Aerosols - Sprayable release agents, adhesive lubricants, lubricating greases and fluids, pastes, grease pastes and solid film lubricants. 7 Metal Forming Lubricants - Water- and non-water-miscible lubricants for hot forming. Die casting release agents and auxiliary casting materials. 8 Chemo-technical s - Solid lubricants as powder, corrosion protection products, cleaner and thinner for numerous application areas. 9 Application Equipment - One- and two-handed patented grease guns ( System Reiner ).TÜV and GS approved. Up to 400 bar pressure. For PE-cartridges and PE-tubes. FUCHS LUBRITECH GMBH Hans-Reiner-Str. 7-13 67685 Weilerbach/Germany Internet www.fuchs-lubritech.com Phone ++49 (0) 63 74 / 9 24-5 Fax ++49 (0) 63 74 / 9 24-9 40 E-mail info@fuchs-lubritech.de 1 Zd 05/04 0601620