1 14 EN Centrifugal pumps Technical Data Delivery rate Q max = 1250 l/min Delivery head H max = 110 m Delivery temperature T = 0 C to + C Kinematic viscosity ν max = 30 mm 2 /s Quality Management DIN EN ISO 9001:08 www.spandaupumpen.com Environmental Management DIN EN ISO 101 Health and Safety Management OHSAS 101
2 Centrifugal pumps spandaupumpen.com PS 01 Immersion pumps, sealless 50 Hz, closed impellers p [psi] H [m] 1 1 110 PS-0107 7-stages 50 Hz 1 90 PS-0106 6-stages Features Vertical multistage coolant pump For delivery of clean, polluted and viscous types of fluids Delivery head 1) 70 50 30 PS-0105 5-stages PS-0104 4-stages PS-0103 3-stages PS-0102 2-stages Installation direcly into the reservoir Pressure port is located above the reservoir plate and designed with internal thread 0 10 PS-0101 1-stages 0 0 300 0 500 Q [l/min] 0 1 1 Q [USgpm] Delivery rate 1) Technical Data Mechanical design Variations Delivery rate Q max 1250 l/min Delivery head H max 105 m Flange Mechanical seal NBR Immersion depth t max 670 mm Shaft 1.0762 Extension tube 1.0308 Kinematic viscosity max. 30 mm 2 /s Delivery temperature 0 C to + C Grain size max. Ø4 mm Contamination max. 8,2 kg/m 3 Direction of rotation clockwise (as viewed looking down on the motor's ventilation side) Impeller Intermediate chamber Bearings Bushing Pumps bottom Deep groove ball bearing with covering disk Sintered iron Fluids delivered Emulsions, cooling and cutting oils, Water with rustproofing additives, heat carrier oil 1) Data for viscosity of ~1 mm²/s at a density of ~1 kg/dm³. Minimum volumetric flow: 5 to 10 % of nominal delivery rate.
spandaupumpen.com Centrifugal pumps 3 PS 01 Immersion pumps, sealless 50 Hz, closed impellers k Ø m Ø1 130 43 l Ø2 / 4x Ø14 max. level of fluid t min. level of fluid Ø1 Electrical data, dimensions and weights at 50 Hz Series Type of pump Frame size Stages Immersion depth t [mm] Voltage / Y U [V] Motor index Rated motor values Output P N [kw] Current / Y l N [A] Speed n N [min -1 ] Dimensions [mm] Øm k l Weight [kg] Sonic pressure [dba] Pressure port (DIN ISO 228) PS PSL 01 250 36 01 3 38 H 1,1 4,07/2,35 2730 1 114 286 450 62-64 550 42 3 44 390 46 02 K 2,2 7,15/4,13 28 176 149 3 65-77 5 48 230/0 6 50 390 51 03 4 L 3,0 10,0/5,75 2885 196 155 3 53 68-74 590 55 4 59 04 530 M 4,0 13,0/7,5 28 196 155 0 61 69-75 6 63 530 85 05 68-75 0 N 5,5 11,2 2900 257 182 484 87 0 06 0 91 69-75 07 670 O 7,5 14,5 2900 257 182 484 105 72-75
4 Centrifugal pumps spandaupumpen.com PS 01 Immersion pumps, sealless Hz, closed impellers p [psi] H [m] 1 1 110 PS-0107 7-stages Hz 1 90 PS-0106 6-stages Features Vertical multistage coolant pump For delivery of clean, polluted and viscous types of fluids Delivery head 1) 70 50 30 PS-0105 5-stages PS-0104 4-stages PS-0103 3-stages PS-0102 2-stages Installation direcly into the reservoir Pressure port is located above the reservoir plate and designed with internal thread 0 10 PS-0101 1-stages 0 0 300 0 500 Q [l/min] 0 1 1 Q [USgpm] Delivery rate 1) Technical Data Mechanical design Variations Delivery rate Q max Delivery head H max Immersion depth t max 1250 l/min 105 m 670 mm Flange Shaft 1.0762 Mechanical seal NBR Extension tube 1.0308 Kinematic viscosity max. 30 mm 2 /s Delivery temperature 0 C to + C Grain size max. Ø4 mm Contamination max. 8,2 kg/m 3 Direction of rotation clockwise (as viewed looking down on the motor's ventilation side) Impeller Intermediate chamber Bearings Bushing Pumps bottom Deep groove ball bearing with covering disk Sintered iron Fluids delivered Emulsions, cooling and cutting oils, Water with rustproofing additives, heat carrier oil 1) Data for viscosity of ~1 mm²/s at a density of ~1 kg/dm³. Minimum volumetric flow: 5 to 10 % of nominal delivery rate.
spandaupumpen.com Centrifugal pumps 5 PS 01 Immersion pumps, sealless Hz, closed impellers k Ø m Ø1 130 43 l Ø2 / 4x Ø14 max. level of fluid t min. level of fluid Ø1 Electrical data, dimensions and weights at Hz Series Type of pump Frame size Stages Immersion depth t [mm] Voltage / Y U [V] Motor index Rated motor values Output P N [kw] Current / Y l N [A] Speed n N [min -1 ] Dimensions [mm] Øm k l Weight [kg] Sonic pressure [dba] Pressure port (DIN ISO 228) PS PSL 01 250 36 01 3 38 H 1,26 4,07/2,35 3368 1 114 286 450 62-64 550 42 3 44 390 46 02 K 2,6 7,5/4,3 30 176 149 3 65-77 5 48 265/4 6 50 390 51 03 4 L 3,6 10,1/5,82 3500 196 155 3 53 68-74 590 55 4 59 04 530 M 4,5 12,7/7,3 34 196 155 0 61 69-75 6 63 530 85 05 68-75 0 N 6,2 11,2 34 257 182 484 87 Δ 4 06 0 91 69-75 07 670 O 8,6 14,5 34 257 182 484 105 72-75
6 Centrifugal pumps spandaupumpen.com PS 03 Immersion pumps, sealless 50 Hz, closed impellers p [psi] H [m] 1 110 PS-0307 2) 7-stages 50 Hz 1 1 90 PS-0306 2) 6-stages PS-0305 5-stages Features Vertical multistage coolant pump For delivery of clean, polluted and viscous types of fluids Installation direcly into the reservoir Pressure port is located above the reservoir plate and designed with internal thread Delivery head 1) 0 70 50 30 10 PS-0304 4-stages PS-0303 3-stages PS-0302 2-stages PS-0301 1-stages 0 0 0 0 0 0 10 Q [l/min] 0 1 1 0 2 2 Q [USgpm] Delivery rate 1) Technical Data Mechanical design Variations Delivery rate Q max Delivery head H max Immersion depth t max 1250 l/min 105 m 670 mm Flange Shaft 1.0762 Mechanical seal NBR Extension tube 1.0308 Kinematic viscosity max. 30 mm 2 /s Delivery temperature 0 C to + C Grain size max. Ø4 mm Contamination max. 8,2 kg/m 3 Direction of rotation clockwise (as viewed looking down on the motor's ventilation side) Impeller Intermediate chamber Bearings Bushing Pumps bottom Deep groove ball bearing with covering disk Sintered iron Fluids delivered Emulsions, cooling and cutting oils, Water with rustproofing additives, heat carrier oil 1) Data for viscosity of ~1 mm²/s at a density of ~1 kg/dm³. Minimum volumetric flow: 5 to 10 % of nominal delivery rate. 2) Frame sizes 0306 and 0307 available on request.
spandaupumpen.com Centrifugal pumps 7 PS 03 Immersion pumps, sealless 50 Hz, closed impellers k Ø m Ø1 130 43 l Ø2 / 4x Ø14 max. level of fluid t min. level of fluid Ø1 Electrical data, dimensions and weights at 50 Hz Series Type of pump Frame size Stages Immersion depth t [mm] Voltage / Y U [V] Motor index Rated motor values Output P N [kw] Current / Y l N [A] Speed n N [min -1 ] Dimensions [mm] Øm k l Weight [kg] Sonic pressure [dba] Pressure port (DIN ISO 228) PS PSL 03 250 38 01 3 K 2,2 7,15/4,13 28 176 149 3 450 42 63-65 550 44 230/0 3 47 02 390 49 M 4,0 13,0/7,5 28 196 155 3 5 51 67-75 6 53 390 73 03 4 N 5,5 11,2 2900 257 182 484 75 70-77 590 77 04 4 86 O 7,5 14,5 2900 257 182 484 530 0 88 70-78 05 05 102 Y 9,5 17,5 29 257 182 522 530 104 73-79 06* 06* P 11 21 29 257 182 522 1 75-79 07* 0 Q 15 29 2900 257 182 566 136 75- * Frame sizes 0306 and 0307 available on request.
8 Centrifugal pumps spandaupumpen.com PS 03 Immersion pumps, sealless Hz, closed impellers p [psi] H [m] 1 110 PS-0307 2) 7-stages Hz 1 1 90 PS-0306 2) 6-stages PS-0305 5-stages Features Vertical multistage coolant pump For delivery of clean, polluted and viscous types of fluids Installation direcly into the reservoir Pressure port is located above the reservoir plate and designed with internal thread Delivery head 1) 0 70 50 30 10 PS-0304 4-stages PS-0303 3-stages PS-0302 2-stages PS-0301 1-stages 0 0 0 0 0 0 10 Q [l/min] 0 1 1 0 2 2 Q [USgpm] Delivery rate 1) Technical Data Mechanical design Variations Delivery rate Q max Delivery head H max Immersion depth t max 1250 l/min 105 m 670 mm Flange Shaft 1.0762 Mechanical seal NBR Extension tube 1.0308 Kinematic viscosity max. 30 mm 2 /s Delivery temperature 0 C to + C Grain size max. Ø4 mm Contamination max. 8,2 kg/m 3 Direction of rotation clockwise (as viewed looking down on the motor's ventilation side) Impeller Intermediate chamber Bearings Bushing Pumps bottom Deep groove ball bearing with covering disk Sintered iron Fluids delivered Emulsions, cooling and cutting oils, Water with rustproofing additives, heat carrier oil 1) Data for viscosity of ~1 mm²/s at a density of ~1 kg/dm³. Minimum volumetric flow: 5 to 10 % of nominal delivery rate. 2) Frame sizes 0306 and 0307 available on request.
spandaupumpen.com Centrifugal pumps 9 PS 03 Immersion pumps, sealless Hz, closed impellers k Ø m Ø1 130 43 l Ø2 / 4x Ø14 max. level of fluid t min. level of fluid Ø1 Electrical data, dimensions and weights at Hz Series Type of pump Frame size Stages Immersion depth t [mm] Voltage / Y U [V] Motor index Rated motor values Output P N [kw] Current / Y l N [A] Speed n N [min -1 ] Dimensions [mm] Øm k l Weight [kg] Sonic pressure [dba] Pressure port (DIN ISO 228) PS PSL 03 250 38 01 3 K 2,6 7,5/4,3 30 176 149 3 450 42 63-65 550 44 265/4 3 47 02 390 49 M 4,5 12,7/7,3 34 196 155 3 5 51 67-75 6 53 390 73 03 4 N 6,2 11,2 34 257 182 484 75 70-77 590 77 04 4 86 O 8,6 14,5 34 257 182 484 530 Δ 4 88 70-78 05 05 102 Y 11,0 17,5 3504 257 182 522 530 104 73-79 06* 06* P 12,5 21 3500 257 182 522 1 75-79 07* 0 Q 17 29 34 257 182 566 136 75- * Frame sizes 0306 and 0307 available on request.
10 Centrifugal pumps spandaupumpen.com Immersion pumps, sealless Order key Series PS- = Standard design PSL = "Slurp" for air-polluted liquids Frame size To determine the frame size the corresponding characteristics has to be used. 01, 03 Stages To determine the desired number of stages the corresponding characteristics has to be used. 01 = 1-stages... 07 = 7-stages s G = gray cast iron (standard) Seal B = gap bush (standard) Pump design S = standard design V = bottom for extension tube Immersion depth in mm 250 = 250 mm... 670 = 670 mm Motor index To determine the desired motor index the appropriate table "Electrical data, dimensions and weights" has to be used. Example: J = 1,5 kw Power supply 01 = 230 /0 V at 50 Hz (to 4 kw) 265 /4 V at Hz (to 4,6 kw) 02 = 0 V at 50 Hz (from 5,5 kw) 4 V at Hz (from 6,3 kw) 05 = Standard for Europe 230/0 V at 50 Hz (from 4 kw) 0 V at 50 Hz (from 4 kw)... further designs on request Motor design BA = standard (insulation class F, IP 54, 2-pole, IE2)... further designs on request Order example: PS-0104GBS4M01BA Series: PS, Frame size: 01, 04-stages, : G grey cast iron, Seal: B gap bush, Pump design: S standard design, Immersion depth: 4 mm, Motor index: M 4,0 kw, Power supply: 01 230/0 V 50 Hz, 265/4 V Hz, Motor design: BA standard (IE2)
Notes
The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless our written permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication, but no liability can be accepted for any loss or damage whether direct, indirect or consequential, arising out of use of the information contained herein. SKF Lubrication Systems Germany GmbH Product department Spandau Pumps Motzener Strasse 35/37 12277 Berlin Germany PF 970444 12704 Berlin Germany Tel. +49 (0)30 702 0 Fax +49 (0)30 702 261 SpandauPumpen@skf.com www.spandaupumpen.com This brochure was presented by: 1-14-EN 11/15 Subject to change without notice.