sens.it HD we get your profit out of inflation! Integrated tire management with automated tire pressure monitoring Professional Tire Management
Make your fleet more effective! sens.it HD for professionals by professionals! An effective reduction of fuel consumption and thus CO 2 emission is only possible if the tire inflation pressure is controlled on the vehicle. The TPMS obligation is already a legal requirement for passenger vehicles. For commercial vehicles, it is the responsibility of the operator or driver alone. Reality has shown that also professional drivers do not maintain their tires enough. The majority frequently travels with insufficient inflation pressure and often with defective tires. Tire failures thus represent the most common reason for breakdowns: investigations of new tire industry show that more than 85 percent of the tire failures result from the progressive loss of pressure and / or an increase in temperature. One for all! In order to optimize your own breakdown and thus, cost statistics, an effective tire pressure monitoring system is required. It must not be too complex and should definitely not be expensive. It should function trouble-free and be easy to install, configure or maintain. The tire data is primarily made available to the fleet manager (and also to the driver, if desired) at all times and the monitoring is not only possible with fixed tractor-trailer combinations. Impossible? Cannot be done? You can and it is possible! sens.it HD combines all demands that truck or bus fleet managers expect: it is much more than just a TPM system. sens.it HD combines professional tire management with automated tire pressure monitoring. A cloud-based database system makes the tire information available at any time and everywhere! An innovative universal textile strap system allows a quick installation of the tire pressure sensor into almost any truck or bus wheel without using tools. The tire management platform carries out all settings and parameters including alarm and reporting functions. In doing so, the complete solution sens.it HD is available at the price of a commercially available TPMS. Smart, Safe, Green. Convince yourself!
The right solution for every fleet. Modular and individual! Solution 1 Ideal for short distance logistics, bus fleets and communal service vehicles that return to a location / depot at regular intervals Stationary pro-active maintenance Sensor Transmits the tire data to the gate router when passing the Gate Gate router transmits the tire data to the host using Low investment needs on the vehicle itself (only sensors are required) Installation of the gate router and induction loop only has to be carried out once LF-Loop Signal Generator Solution 2 Ideal for long distance and leasing vehicles, hook-and-drop applications as well as tractor and trailers from different owners Pro-active maintenance when driving Sensor Measures the tire data when travelling Transmits the tire data to the host at regular intervals Automatic setup via the host Tractor and semitrailer / trailer are treated as individual vehicle units The tires information can be retrieved directly from the router using a handheld device Solution 3 Ideal for long distance and leasing vehicles, hook-and-drop applications as well as tractor and trailers from different owners + plus an immediate warning for the driver via an additional display in the cabin Pro-active maintenance when driving, info display for tractor / trailer Display Measures the tire data when travelling Transmits the tire data to the host at regular intervals Automatic setup via the host Tractor and semitrailer / trailer are treated as individual vehicle units Driver warning in case of sudden pressure drops or overheating of the tractor or trailer tires
In all solutions: easy installation significant gain sens.it HD is easy and quick to install. Whether your decision is the vehicle or the gate solution the heart of the system is the sensor. Using our SAS Attachment Strap, it is installed to the wheel in about 20 seconds. Of course, this is also possible during each tire assembly! Now the sensor only needs its receiver, the router. For the vehicle solution, this is mounted on the vehicle itself. The installation takes about 30 minutes. And your vehicle is ready to go. For the gate solution, except for the sensor, nothing else has to be installed on the vehicle. An induction loop is required at the gate. The trigger cable can be installed without much effort by cutting a groove in the road surface. We would be pleased to provide the respective drawings. And the corresponding control unit? This is a ready to mount unit and only requires a power supply. In this way, the tire information of all your vehicles will be captured easily and quickly and necessary corrections can be carried out. This saves time and money! Sensor Attachment Strap tested successfully! The ALLIGATOR SAS attachment strap does not only fit all wheel types. It has already proven its speed and temperature capabilities in practice. The result: the innovative strap system holds the sensor in the position installed, and thus, also compensates the wheel expansion that is caused by high temperatures of approx. 300 F. sens.it HD: automated tire pressure monitoring reduces your costs! Exemplary ROI Calculation: Train 3-S2 with 6x2 tractor and 2 axle trailer; combined regional and long distance application; annual mileage of 65,000 miles. Ø fuel consumption 5.6 mpg, Ø tire price (mixt for all positions): approx. $ 400/tire; Ø tire performance 130,000 miles with optimal tire pressure Assumption (accord. Conti): 10% reduction of tire rolling resistance results in approx. 4% savings in fuel. 1 gal of diesel consumption is equivalent to approx. 22 lbs CO 2 -emission. Tire underinflating of approx. 12% results in approx. 4% increase in rolling resistance = 1.6% increased consumption = 192 gallons/year; 192 gal x $ 4.00/gal = $ 768/year Assumption (accord. Michelin): Pressure deviation of 12% results in 5% degradation of the tire mileage; savings on tire costs: 18 tires x $ 400 x 5% = $ 360 Assumption (accord. Michelin Euro Assist): Prevention of tire failures: on average 2 tire failures over a period of 5 years (1 failure each for tractor and trailer in 5 years) average cost per tire breakdown (replacement of tire and breakdown service) in North America: approx. $ 1,000/ breakdown (no costs for delay or consequential charges considered) Total savings Estimated cost for equipment of a trailer truck per train/5 years: $ 2,642 Savings on fuel costs for a trailer truck over a period of 5 years $ 3,840 Savings on tire costs (assumption: 2,5 sets of tires in 5 years) $ 900 Savings on prevented tire breakdowns: $ 2,000 Potential total savings for trailer truck over a period of 5 years: $ 4,098 and in addition a reduction of CO 2-emissions of 4,225 lbs/year and truck! In $ 1,000 5 4 3 2 1 0 Potential savings with sens.it HD over 5 years ROI 1.9 years 0 y 1 y 2 y 3 y 4 y 5 Investment Saving potential
Professional Tire Management Total control over your tire management. At all times and everywhere. Sensor Attachment Strap SAS* Versatile fit for any wheel type Easy, fast and tool-less mounting No metal parts, no corrosion Tire pressure sensor Continuous tire pressure and temperature capturing Small sensor size and low mass Meets OEM requirements Smart Safe Green Adapted Solutions for Fleets "Gate" solution, e.g., for distribution transport or city bus operations Vehicle solution for long distance traffic Individual monitoring of tractor and trailer * Patent pending Communication Installation on the Vehicle or at the "Gate" Transmits sensor data to the cloud database Remote data transmission for configuration and software INTIRE/INFLEET management platform Simple and transparent tire / wheel management Provides analyses, statistics and work lists Open system platform with modular structure
Professional Tire Management sens.it HD combines professional tire management with automated tire pressure monitoring for commercial vehicles: A cloud-based database system that makes the tire data available at any time and everywhere! The innovative universal textile strap system allows the quick installation of the tire pressure sensor into almost any HGV wheel without using tools. From 16" to 24". All settings and parameters are controlled via the tire management platform. Next to the alarm and reporting functions, the platform offers all features for a professional tire management. A complete solution at the price of a sole TPMS. sens.it HD made by ALLIGATOR Smart, Safe, Green! Advantages that convince: Efficient tire management with automated tire pressure monitoring Web-Interface access anytime and anywhere Web-based, transparent, safe and easy data handling Low effort for investments with optimum cost-benefit effect Increases efficiency and safety, cuts down effort and costs Optimizes tire wear, fuel consumption and reduces tire failures Fast and tool-less sensor mounting via Sensor Attachment Strap (SAS*) on any wheel type Robust reliable system solution "Made in Germany" by ALLIGATOR Smart, Safe, Green * Patent pending ALLIGATOR Ventilfabrik GmbH, Richard-Steiff-Straße 4, 89537 Giengen/Brenz, Germany, phone +49(0)7322 130-222 alligator-sensithd.com