PRODUCT INFORMATION PRODUCT INFORMATION Grain Harvesting Axial-Flow 2013 Combine and Header Compatibility Guide This is a Sales Education document not to be used for advertising. Book: Grain Harvesting Section: General Form No.: Replaces: GH-2102-10 Date: September 2012 9/21/2012 Case IH Product Information 1
Introduction For over 35 years, Case IH customers have come to expect great performance out of their Axial- Flow combines, and the same goes for Case IH headers. Case IH headers play a very important role in harvesting. Our Case IH engineers continue to enhance, refine and expand the header lineup to provide Case IH customers the latest in header technology. This Product Information piece details header compatibility of each header model as it relates to a specific Axial-Flow combine. Axial-Flow Combine and Header Compatibility, Including Commonly Ordered Conversion Kits Model Year 2013 Header Compatibility 5088/5130 6088/6130 7088/7130 7120/7230 8120/8230 9120/9230 2010 20, 25, 30 ft. 20, 25, 30 ft. 20, 25, 30 ft. 20, 25, 30 ft. 20, 25, 30 ft. 20, 25, 30 ft. 3020 20, 25, 30 ft. 20, 25, 30, 35 ft 20, 25, 30, 35 ft. 20, 25, 30, 35 ft. 20, 25, 30, 35 ft. 20, 25, 30, 35 ft. 3400 3406, 3408 3406, 3408, 3412 3406, 3408, 3412 3408, 3412 3408, 3412, 3416, 3418 3408, 3412, 3416, 3418 2600 2606 2606, 2608 2606, 2608 2608, 2612 2608, 2612 2608, 2612 2142 30 ft. 30, 35 ft 30, 35 ft. 30, 35 ft 30, 35 ft 30, 35 ft 2152 25 ft. 25, 30, 35 ft 25, 30, 35, 40 ft 25, 30, 35, 40 ft 25, 30, 35, 40, 45 ft 25, 30, 35, 40, 45 ft 2162 NA 30, 35 ft. 30, 35, 40 ft. 30, 35, 40, 45 ft. 30, 35, 40, 45 ft. 30, 35, 40, 45 ft. 3016 12 ft. 12 ft. 12, 15 ft 12, 15 ft 12, 15 ft 12, 15 ft The chart above lists the recommended combine and header combinations for maximum performance and productivity. The following pages contain information about converting combines and headers to accept configurations not listed in the compatibility chart above, although performance can be compromised in some conditions and applications. 9/21/2012 Case IH Product Information 2
1000 Series Grain Heads Conversion to enable 1010/1020 Grain Heads to fit 5088/6088/7088 & 5130/6130/7130 are listed below. 1010 20 ft. Version 87746706 Electrical Adapter kit 87552504 Hydraulic Adapter kit 87336803 Sliding pin latch kit 125959A1 247426A1 Slow down pulley Belt 87374406 Combine Feeder Face 1010 25 & 30 ft Version 87746706 Electrical Adapter kit 87552504 Hydraulic Adapter kit 87336803 Sliding pin latch kit 125959A1 247426A1 Slow down pulley Belt 87374406 Combine Feeder Face 1020 17.5, 20 & 22.5 ft Version 1020 25 & 30 ft Version 87746706 Electrical Adapter kit 87552504 Hydraulic Adapter kit 87336803 Sliding pin Latch Kit 87746706 Electrical Adapter kit 87552504 Hydraulic Adapter kit 87336803 Sliding pin Latch Kit 126012A1 Slow down pulley 126012A1 Slow down pulley 87374406 Combine Feeder Face 87374406 Combine Feeder Face 9/21/2012 Case IH Product Information 3
2010 and 2020 Grain Heads Conversion to fit 2010 and 2020 platforms on a 21/23/25 series combine are listed below. 2010 2020 415074016 N/A Complete kit without header height control 415075016 415077016 Complete kit with auto header height (no Field Tracker) 415076016 415078016 Complete kit with auto header height and Field Tracker Note: The above are ordered as Whole goods Factory Supplied Accessories. Additional details of what is included in the kits are listed below. 9/21/2012 Case IH Product Information 4
3020 Flex Header Conversion Kit and other requirements to fit 3020 Flex Header on a 21/23/2500 series combine are listed below. Kit s and s 84480201* 21/23/2500 Series Mechanical Components Electrical Components PTO Half Shaft Instruction Manual *Combine must be equipped with the following Other Required Kits listed below. Other Required Kits or Components 87539791 Sliding Latch Pin Kit - With Field Tracker 87539793 Sliding Latch Pin Kit - Without Field Tracker 87301386E Hydraulic Connector Single Point Hydraulic Hookup 9/21/2012 Case IH Product Information 5
2200 and 3200 Corn Heads Conversions to fit 2200 and 3200 Corn Heads on 5088/6088/7088 & 5130/6130/7130 combines are listed below. 84135007 Complete kit for 2206/3206 See Below for more detail. 84138594 Complete kit for 2208/3208 See Below for more detail. 84138597 Complete kit for 2212/3212 See Below for more detail. Order one of the above kits and one of the following latch kits. 87473648 Latch kit for 70/8010, 20, 88 & 30 Series Feeder/Header Interface 87337673 Latch kit for legacy or 23/2500 Series Feeder/Header Interface (Header Parts for Sliding Pin Latch). Not needed if header has already been updated to sliding Pin Latch design. Note: The row unit angle on the above conversion kits is not optimized which could cause performance issues in some conditions. The front feeder face plate angle may need to be adjusted to compensate for field conditions. Kit s and s 2206/3206 5088/6088/7088 & 5130/6130/7130 84135007 > Yoke and Bearing Cross assembly Sprocket 25T WA Chain Drive Spring Quick Coupling Elbow, 90 ADJ Adapter Harness for Header Hookup Plate, CYL Cover Kit Includes Misc. Hardware Kit Includes Hoses and Couplers 9/21/2012 Case IH Product Information 6
2200 and 3200 Corn Heads (Continued) Conversions to fit 2200 and 3200 Corn Heads on 5088/6088/7088 & 5130/6130/7130 Series Combines are listed below. Kit s and s 2208/3208 5088/6088/7088 & 5130/6130/7130 84138594 > Yoke and Bearing Cross assembly Sprocket 25T WA Chain Drive Spring Quick Coupling Elbow, 90 ADJ Adapter Harness for Header Hookup Plate, CYL Cover Kit Includes Misc. Hardware Kit Includes Hoses and Couplers Kit s and s 22128/3212 5088/6088/7088 & 5130/6130/7130 84138597 > Yoke and Bearing Cross assembly Sprocket 25T WA Chain Drive Spring Quick Coupling Elbow, 90 ADJ Adapter Harness for Header Hookup Plate, CYL Cover Kit Includes Misc. Hardware Kit Includes Hoses and Couplers 9/21/2012 Case IH Product Information 7
2200 and 3200 Corn Heads (Continued) Conversions to fit 2200/3200 Series Corn Heads on 7010/8010 & 7120/8120/9120 & 7230/8230/9230 combines are listed below. 87041928 Complete kit for 2208/3208 See Below for more detail 87041425 Complete kit for 2212/3212 See Below for more detail. Note: The row unit angle on the above conversion kits is not optimized which could cause performance issues in some conditions. The front feeder face plate angle may need to be adjusted to compensate for field conditions. 2208/3208 7010/8010 & 7120/8120/9120 & 7230/8230/9230 87041928 > Drive Unit PTO A Sprocket 30T WA Chain Drive Spring Quick Coupling Elbow, 90 ADJ Plate, CYL Cover Sensor, AHHC Harness, 30 Foot Kit includes Misc. Hardware Kit includes Hoses and Couplers 2212/3212 7010/8010 & 7120/8120/9120 & 7230/8230/9230 87041425 > Drive Unit PTO A Sprocket 30T WA Chain Drive Spring Quick Coupling Elbow, 90 ADJ Plate, CYL Cover Sensor, AHHC Harness, 30 Foot Kit includes Misc. Hardware Kit includes Hoses and Couplers 9/21/2012 Case IH Product Information 8
3400 Corn Heads There are no provisions to adapt a 3400 series Corn Head to a 21/23/2500 series combine. 2600 Series Chopping Corn Heads 87588414 Convert 2606 from 23/2500 to 88/10/20/30 Series 87588415 Convert 2606 from 88/130 series, 10/20/230 series to 23/2500 series 87588416 Convert 2608 from 23/2500 88/10/20/30 Series 87588417 Convert 2608 from 88/130 series, 10/20/230 series to 23/2500 series 9/21/2012 Case IH Product Information 9
2052 & 2062 Draper Heads Conversions to convert from one series combine to another, or if head was ordered with a generic adapter, are listed below. 87430799, 87430802, & 87430810 From 21/23/2500 to 88/130 series, 10/20/230 series (45 in-feed deck) 87461691 From 21/23/2500 to 88/130 series, 10/20/230 series (56 in-feed deck) Complete kit contains all electrical, hydraulic and mechanical connections. 87430800, 87430798, & 87430809 From 88/130 series, 10/20/230 series to 21/23/2500 series (45 in-feed deck) 2042 Draper Heads Conversions to convert from one series combine to another, or if head was ordered with a generic adapter, as listed below. 87430799, 87430802, & 87430810 From 21/23/2500 to 88/130 series, 10/20/230 series (45 in-feed deck) 87430809, 87430800, & 87430798 From 88/130 series, 10/20/230 series to 21/23/2500 series (45 in-feed deck) 2142/2152/2162 Draper Heads Conversions to convert from one series combine to another, or if head was ordered with a generic adapter, are listed below. 87557886 Completing package for 88/130 series, 10/20/230 series 87563623 Completing package for 23/2500 series and 88/130 series with legacy 23/2500 feeder conversion package installed 9/21/2012 Case IH Product Information 10
2015 and 2016 Pickup Heads 2009 Model Year was the last build of the 2015 pickup head. The 2016 fits the 88/130 series, 10/20/230 series. No kits are available at this time to convert to a 21/23/2500 series. 3016 Pickup Head Conversion Kit and other requirements to fit 3016 Pickup Header on a 21/23/2500 series combine are listed below. Kit s and s 84268190* Kit for 15ft 3016 21/23/2500 Series 84480830* Kit for 12ft 3016 21/23/2500 Series Mechanical Components Electrical Components PTO Half Shaft Instruction Manual *Combine must be equipped with the following Other Required Kits listed below. Other Required Kits or Components 87539791 Sliding Latch Pin Kit - With Field Tracker 87539793 Sliding Latch Pin Kit - Without Field Tracker 87301386E Hydraulic Connector Single Point Hydraulic Hookup 9/21/2012 Case IH Product Information 11
Summary Case IH headers continue to meet and exceed Case IH customer expectations in the areas of performance and increased productivity. To further increase legacy Axial-Flow combines productivity, Case IH has developed kits to allow new headers to be installed on prior model combines. This allows legacy combines to take advantage of the new header designs. Case IH engineering is not only supporting future Axial-Flow combines but also past models to ensure there longevity and resale value for today and into the future. Sell the Axial-Flow Advantage! 9/21/2012 Case IH Product Information 12
NOTES 9/21/2012 Case IH Product Information 13
The information presented herein is intended for sales education purposes and is intended for the use of CNH America LLC, its affiliates, and its independent dealers only. This information is to be treated as CONFIDENTIAL and is not to be used for advertising purposes. Competitive comparisons are based on competitive information known at time of printing. Sources of information include published industry specifications and data. General statements made herein are the opinions of the authors concluded from supporting data. Note: Specifications are stated in accordance with industry standards or recommended practices, where applicable. Important: CNH America LLC reserves the right to change product specification without notice and without incurring any obligation relating to such changes. Any trademarks referred to herein in association with the goods and/or services of companies other than CNH America LLC are the property of those respective companies. Visit Case IH on the Web at www.caseih.com CNH AMERICA LLC 700 STATE STREET RACINE, WI 53404 U.S.A. 9/21/2012 Case IH Product Information 14