Sunflower 4700 Series In-Line Ripper Product Information Guide
TABLE OF CONTENTS INTRODUCTION... 100 FEATURES AND BENEFITS 4700 Series Sunflower In-Line Ripper... 200 SPECIFICATIONS 4700 Series Sunflower In-Line Ripper... 0 I
INTRODUCTION General The Sunflower 4700 Series In-Line Rippers are built for professional farmers in search of a rugged machine to handle challenging soil and residue conditions. The 4700 Series combines deep tillage for primary tillage needs during the fall season. The 4700 Series is built on a solid frame with heavy-duty shanks designed to deeply penetrate heavily compacted soils while easily slicing through tough crop residue to maximize crop yield potential. Model Numbers Descriptions Number of Shanks 4710 3 Point Mounted In-Line Ripper 5, 7, and 8 47 3 Point Flat Fold In-Line Ripper 8 47 Pull Type Fold Over Center In-Line Ripper 12 100
MODEL 4700 IN-LINE RIPPER Available in three models, the 4700 Series is built on a heavy-duty frame designed to withstand the high stress of aggressive tillage practices. The 4700 main frame is constructed of strong 4 x 6 x 3/8-inch (101 x 152 x 9.5 mm) steel tubing that is cross braced and gusseted for added rigidity and trouble-free maintenance. The 4700 Series is available in models ranging from 5 to 12 shanks that penetrate and fracture the soil to eliminate tough compacted zones in the soil. Cutting widths of the 4700 Series In Line Ripper range from model SF4710-5 at 12.5-feet to the SF47-12, one of the largest In-Line rippers in the industry.at -feet. Shank spacing is set at -inch intervals and designed to handle toughest soil conditions with a 3,000 lb. maximum trip pressure setting and is a true spring reset not a spring cushion system. [200]-1
Tongue (47-12) The 4700-12 tongue features a 4 x 6-inch (102 x 152 mm) tubular tongue with Cat IV hitch. A user friendly mechanical jack and safety chain is included as standard equipment. Frame Leveling (47-12) Frame level adjustments are made by changing the length of the turnbuckle located on the tongue. Hose Station (47-12) The hydraulic hose loom and docking station prevents most contamination of the hydraulic fittings and damage to the hydraulic lines. The 7-pin electrical connector docking station is also attached. The operators manual container is also attached for easy access. [200]-2
Frame The frame is constructed of high strength 4 x 6 x 3/8 inch (102 x 152 x 9.5 mm) steel tube to withstand the high stress of aggressive tillage. It is cross braced and gusseted for added strength and trouble-free service. Shanks Shank spacing is inches ( cm). The minimal disturbance shanks of the Sunflower 4700 Series have a maximum working depth of 20 inches (50.8cm) and 00 pound point load. The shank is made of 1-1/4 inches (31.8 mm) high strength abrasion resistant steel with a chromium carbide shin guard to protect the shank from wear. Also available are parabolic shanks with the same point load and a operating depth of 16-inches (40.6 cm). Both shanks are also available in a fixed version with shear bolt protection as shown in the lower picture. [200]-3
Front Coulters (Optional) The 20-inch diameter rippled front coulters can run up to 7-inches deep to ensure residue is sliced allowing the following ripper shanks to pass through without disturbing the ground surface. The depth is adjusted by turning the adjustment bolt offering infinite settings up to the 7-inch maximum depth.. Shank Offsets (Staggering) The optional shank staggering system offsets the ripper shanks 12-inches allowing more space between shanks and improving residue flow between the shanks. 3-Point Flat Fold The 3-point flat fold is available in the 8 shank version and the option of adding a Pull Hitch and transport wheels is available to convert it to a pull type unit. The pull type version is shown.. [200]-4
Wheels and Tires Rigid Frame (Optional Gauge Wheels) 3-Point mount utilizes gauge wheels that are 20.5 x 10-10 ply and are available on the Rigid and Flat Fold models. 47-8 and 47-12 The lift wheels on the folding models use 11L x 15 tires on 1.5-inch (38.1 mm) spindles with 6 bolt hubs and are optional on the 47-9. Lift System On the 47-12 the lift cylinders are plumbed in a master and slave configuration that allows the master cylinders under the center section to activate slave cylinders under the center and wing sections. This keeps them synchronized and ensures the wings stay level with the center section. The cylinders are mounted at each wheel location to maximize lift. On the 3-Point models with optional pull hitch there are only two wheels and lift assemblies with a master slave configuration. Depth Setting Depth settings are maintained with rod collars on the center lift cylinders. Depth is easily changed by swapping collars of various lengths. The picture shows the transport collar in the location the depth collars would be installed. [200]-5
Disc Leveler Option (Optional) The disc leveler is used with the parabolic shank and is used to close the trench behind the shank and build a berm. Row Sealer Attachment (Optional) The wavy coulters close the slot created by the shank and the rolling basket firms the berm created by the coulters. Real Buster Attachment (Optional) The Reel Buster can be used in conjunction with the Row Sealer attachment and is mounted to the Row Sealer attachment frame. [200]-6
Hitch Options The optional pull type hitch converts the 3- point units to pull type, and includes the bolt on lift assembly, hinged tongue, tires, safety chain, and (2) 4 x 12-inch (101.6 x 4.8 mm) hydraulic cylinders, hoses and fittings. Safety Equipment The 4700 Series has a highly visible Safety warning lighting system including turn signals, amber warning lights and the SMV along with safety chains at the hitch point. [200]-7
M0DEL NUMBER 4710-5 3 pt Rigid 4710-7 3 pt Rigid 4710-8 3 pt Rigid 47-8 3 pt Flat Fold 47-12 Pull Type ESTIMATED Wt. (lbs) (kg) 2,971 1,348 4,058 1,841 4,516 2,048 5,392 2,446 11,064 5,019 TRANS WIDTH (ft in) (m) 10 10 3.3 16 2 4.9 20 2 6.1 11 0 3.4 15 0 4.6 TRANS HEIGHT (ft in) (m) 11 0 3.4 11 0 3.4 11 0 3.4 11 0 3.4 15 0 4.6 NUMBER SHANKS 5 7 8 8 12 COULTER BLADES 5 7 8 8 12 CUT WIDTH * (ft in) (m) 12 6 3.8 17 6 5.3 20 0 6.1 20 0 6.1 0 9.1 SHANK SPACE (in) (cm) BLADE SPACE (in) (cm) WEIGHT/SHANK (lbs) (kg) 594 270 580 263 565 256 674 5 922 418 * SHANKS [200]-8
GENERAL SPECIFICATIONS MODEL 4700 IN-LINE RIPPER Models 4710/47 Frame Type (Rigid) Primary Tillage/Inline Ripper Nominal (Cutting) Width 4710-5 ft (m) 12.5 (3.81) 4710-7 ft (m) 17.5 (5.33) 4710-8 ft (m) 20.0 (6.10) Frame Type (folding) Primary Tillage/Inline Ripper Nominal (Cutting) Width 47-8 ft (m) 20 (6.10) 47-12 ft (m) (9.14) TRACTOR REQUIREMENTS Hitch 3 Point/Drawbar Hydraulic Operating Pressure Minimum psi (kpa) 2500 (17,238) Maximum psi (kpa) 00 (20,685) Hydraulic Remotes - Total Required Remote # 1 Lift Remote # 2 (47) Fold Horsepower - Minimum hp per shank 35--50 Electrical Voltage 12 Ground Negative Connector for Tail and Warning Lamps 7-Pin FRAMES Frame Type Rigid/Pull Type Frame Construction in (mm) 4 x 6 x.375 (101.6 x 152.4 x 9.53) Frame Leveling Turn Buckle (Infinite) Number of Wheels 4710-5 2 4710-7 2 4710-8 2 47-8 2 47-12 6 [0]-1
HITCH Design SPECIFICATIONS MODEL 4700 IN-LINE RIPPER "A" Style with overhead frame Length 47-12 in (mm) 110 (2,794) Tractor Connection 4710-5 3 Point/Drawbar 4710-7 3 Point/Drawbar 4710-8 3 Point/Drawbar 47-8 3 Point/Drawbar 47-12 Drawbar LIFT SYSTEMS Center Section and Wings 47-8 & 47-12 Lift Wheels Tires 11L x 15 Spindles in (mm) 1.5 (38.1) Hubs 6-bolt Gauge Wheels Tires 20.5 X 10 X 8 Spindles in (mm) 1.75 (44.45) Hubs 6-bolt Hydraulics Depth Control Stop Collars Lift System Double Acting, Dual Master/Slave 47-8 in (mm) Two, 4.5 x 12 00 psi (114.3 x 4.8) 47-12 in (mm) Two, 5 x 12 & Two 4.75x12 Rephasing 00 psi (127 x 4.8) Wing Lift System Double Acting 47-12 in (mm) Two, 4.5 x 12 Rephasing 00 psi (114.3 x 4.8) Fold System 47-8 in (mm) Two 4 x 24 00 psi (101.6 x 609.6) 47-12 in (mm) Two 5 x 24 00 psi (127 x 609.6) [0]-2
SPECIFICATIONS MODEL 4700 IN-LINE RIPPER SHANKS Auto Reset in (mm) 1.25 x 4 x 34 (32 x 101.6 x 863.6) Spacing in (mm) (762) Protection Auto Reset Point Pressure lb (kg) 3,000 (1,360.8) Point Trip Height in (mm) 16 (406.4) POINTS Straight in (mm) 2 (50.8) Winged in (mm) 7 (177.8) DIMENSIONS Transport Width 4710-5 ft (m) 10.83 (3.) 4710-7 ft (m) 16.17 (4.93) 4710-8 ft (m) 20.17 (6.15) 47-8 ft (m) 12.00 (3.66) 47-12 ft (m) 16.42 (5.00) Transport Height 47-8 ft (m) 11 (3.35) 47-12 ft (m) 15 (4.57) Weight (base units less points) 4710-5 lbs 2,971 (1,348) 4710-7 lbs 4,058 (1,841) 4710-8 lbs 4,516 (2,048) 47-8 lbs 5,392 (2,446) 47-12 lbs 11,064 (5,019) TRANSPORT LIGHTING Lights Connection Safety Signs 2 Dual lamp, Amber Front/Rear, and 2 Red Rear Enhanced Turn Signal Module with 7-Pin Connector Reflectors and SMV 2010 AGCO Corporation. All rights reserved. This document and all of its contents are owned exclusively by AGCO Corporation and are protected by copyright law. No portion of this document may be used, reproduced, extended, translated into another language, stored, or transmitted by any means, electronic, mechanical, photocopying, scanning, recording, or otherwise, without the prior written permission of AGCO Corporation. "AGCO" is a registered trademark of AGCO Corporation. [0]-3