Rim Trims and Functions ED7000 Rim Exit Device ANSI Type Type Function Description ED7200 4 Exit Only 01 Exit only; no trim. (Accepts all trims listed below) For Dummy and functions, see Trim Designs below. Dummy 02 Always rigid. 03/04/09 Always rigid. Key removable only when locked. Pull Trim Design Dummy 02 03/04/09 D Grip Pull P4 12-1/8" (305mm) 1-5/8" (41mm) P450 P457 Round Grip Pull P5 12-1/8" (305mm) 1-5/8" (26mm) 5-7/8" (149mm) P560 P557 Pull P6 Grip: Wrought 2" (51mm) 7 (178mm) 1-5/8 (41mm) P650 P657 2-1/2 (64mm) Plate P7 7" (178mm) 1-5/8" (26mm) N/A P757 ED7000.6
Trims/Mullions ED7000 P12 Trim: P12, P13, P14* 11" Specify Part Number, 716F50M x Finish 1 P13 P13 19" 18" Specify Part Number, 716F51M x Finish 1 P14 P14 10-3/ Specify Part Number, 716F52M x Finish 1 1. Available in 605, 606, 612, 613, 626, 629 and 630 finishes. *Available on thick doors only.
Vertical Rod Trims and Functions ED7400 Vertical Rod Exit Device ANSI Type Type Function Description ED7400 5 Exit Only 01 Exit only; no trim. (Accepts operator trim. ) ED7401 5 Exit Only 01 Exit only; no trim. (Accepts lever trim. door only.) For Dummy and functions, see Trim Designs below. 08/11 Free at all times, except when locked by key. 03/04/09/12 Always rigid. Key removable only when locked. Lever Trim Design (Available with ED7401 devices only.) 08 03/04/09 Citation C4 Cylinder: Mortise MR Cylinder: 4266-001- *1-3/4 thick door only (76mm) 5" (127mm) C455 C457 Dirke D4 Cylinder: Mortise MR Cylinder: 4266-001- *1-3/4 thick door only 2-7/8" (73mm) 4-1/2" (114mm) D455 D457 ED7000.10
Vertical Rod Trims and Functions ED7400 Operator Trim Design (Available with ED7400 devices only.) 11 03/04/12 D Grip Operator 03 Cylinder: Mortise MR Cylinder: 4266-001- 12-1/ (311mm) 1-7/8" (48mm) 5-7/8" (149mm) 0355 0357 0356* Round Grip Operator 04 Cylinder: Mortise MR Cylinder: 4266-001- 12-3/ (324mm) 2-1/ (57mm) 6-1/2" (165mm) 0455 0457 0456* *Key also used to hold top and bottom latchbolts in retracted position for 4 function. ED7000.11
Mortise Trims and Functions ED7600 Mortise Exit Device ANSI Type Type Function Description ED7600 10 Exit Only 01 Exit only; no trim. (Accepts all trims listed on pages 14 and 15) ED7600A 10 Exit Only 01 3-hour fire-rated exit only; no trim. (Accepts all trims listed on pages 14 and 15. Passage Free at all times. For Passage, Dummy, and functions, see Trim Designs below and on page 15. Dummy 02 Always rigid. 05/08 Free at all times, except when locked by key. 03/04/06/09 Always rigid. Key removable only when locked. Lever or Knob Trim Design Citation C4M (For Doors) Dirke D4M (For Doors) Belmont B5M Knob: Wrought reinforced (76mm) 2-7/8" (73mm) (For Doors) 3-1/2" (89mm) Global G6M Knob: Wrought reinforced (For Doors) 3-3/8" (86mm) 5" (127mm) 4-1/2" (114mm) 2-1/ (57mm) 2-1/ (57mm) Passage Dummy 02 05/08 03/04/06/09 C4M10 N/A C4M55 N/A D4M10 N/A D4M55 N/A B5M10 B5M50 B5M55 N/A G6M10 G6M50 G6M55 N/A ED7000.14
Mortise Trims and Functions ED7600 Thumbpiece Trim Passage Dummy 02 05/08 03/04/06/09 D Grip T11M Cylinder: 1-1/ Mortise (For Doors) 12-1/ (311mm) 5-7/8" (149mm) T11M10 T11M50 T11M55 T11M57 1-7/8" (48mm) Round Grip T12M Cylinder: 1-1/ Mortise (For Doors) 12-1/ (311mm) 6" (152mm) T12M10 T12M50 T12M55 T12M57 2-1/2" (64mm) P12 Trim: P12, P13, P14 11" Specify Part Number, 716F50M x Finish 1 P13 19" 18" Specify Part Number, 716F51M x Finish 1 P14 10-3/ Specify Part Number, 716F52M x Finish 1 1. Available in 605, 606, 612, 613, 626, 629 and 630 finishes. ED7000.15
Concealed Vertical Rod Trim and Function ED7800 Concealed Vertical Rod Exit Device ANSI Type Type Function Description ED7800 6 Exit Only 01 Exit only; no trim. (Accepts 05 operator trim.) ED7800A 6 Exit Only 01 3-hour fire-rated exit only; no trim. (Accepts 05 operator trim.) For function, see Trim Design below. 09 Always rigid. Key removable only when locked. Operator Trim Design 09 Operator 05 Cylinder: Special Mortise 2-5/8" (67mm) 1-11/16" (43mm) 0557 1-1/ (32mm) ED7000.18