Tweco Weldskill High Value Mig Gun These guns feature a patent-pending design that is easy to maneuver in various welding positions.

Tweco Weldskill High Value Mig Gun These guns feature a patent-pending design that is easy to maneuver in various welding positions. Jacketed, durable, thick-walled brass tube to protect patented through-the-tube Cablehoz. Lightweight & ergonomic handle design provides operator comfort, similar to popular Spray Master. Weldskill Cool-hand gun handle runs cooler for operator comfort. Inert Gas Equipment The 140 Amp, 180 Amp and 0 Amp guns are perfect for farm, garage, hobby/diy, artistic metal working, job shops, and maintenance and repair applications. Features: Operator appeal with an ergonomic handle featuring a diamond pattern grip. Handle that runs cooler than comparable guns because there are no brass block inside the handle, making it light weight as well. Long-life trigger tested at over 1. million cycles without failure. Rugged steel spring strain relief for durability and robustness. Common, standard Tweco 11 Series front end. Rugged, long-life trigger lasts over ONE million cycles. Cross Section Superior engineering and features Steel Spring Strain Relief Handle (Half) Cablehoz Long-life Trigger Cablehoz Diffuser Adapter Diffuser Adapter Brass Jacketed Tube Steel spring strain relief adds durability and robustness to handle connection. Brass Jacketed Tube Insulator Diffuser Adapter Crimped & Embedded in Insulator for Improved Durability 140 Amps at 0% duty cycle. Typical applications: DIY, hobby / home project welding, repair of household appliances such as grills, metal furniture, ornamental welding, welding of metal fence and iron gates. 180 Amps at 40% duty cycle. Typical applications: muffler & auto-body repair, garden and farm equipment repair, architectural metal work, fencing & iron gates. 0 Amps at 40% duty cycle. Typical applications: light fabrication, welding of HVAC, auto-body, RV/campers, farm equipment. MIG Gun Styles 140 Amp MIG Gun* 180 Amp MIG Gun* 0 Amp MIG Gun* Rear Connector (Replacement) Rear Connector Tweco WS140T-10-3035 1017-130 WS180T-1-3035 1017-1306 WS0T-15-3035 103-150 350-174H 035-110 Miller WS140M-10-3035 1017-1303 WS180M-1-3035 1017-1307 WS0M-15-3035 103-151 350-174MH 035-111 Lincoln WS140L-10-3035 1017-1304 WS180L-1-3035 1017-1308 WS0L-15-3035 103-15 350-174HXL 035-116 Hobart WS140H-10-3035 1017-131 WS180H-1-3035 1017-1313 MK35-130H 000-835 Euro-Kwik WS140X-10-3035 1017-1305 WS180X-1-3035 1017-1309 WS0X-15-3035 103-153 174EX-1 040-76 *Rear connector supplied as standard. 03

Inert Gas Equipment Weldskill Tweco Item No. Description 1 WS1-50F 110-1346 Nozzle WS11-35 1110-114 Contact Tip 3 WS51 1510-1140 Gas Diffuser WS80-140 04-050 Handle with Screws (WS140 Series) 4 WS80-180 04-051 Handle with Screws (WS180 Series) WS80-0 04-05 Handle with Screws (WS0 Series) 5 WS90 04-053 Microswitch with Lead Wires 6 WS90-LEV 04-054 Trigger Lever Item No. Description 7 WS90-LEV-S 04-055 Trigger Lever Spring (pkg. 5 each) 350-174H 035-110 Rear Connector Plug - Tweco 8 350-174MH 035-111 Rear Connector Plug - Miller 350-174HXL 035-116 Rear Connector Plug - Lincoln MK35-130H 000-835 Rear Connector Plug - Hobart 9 WS4-3035-15 140-1140 Conduit Assembly 10 35K-350-1 000-35 Control Wire - Tweco WM354-M 030-075 Control Wire - Miller & Lincoln Consumables NOZZLES CONTACT TIPS GAS DIFFUSER CONDUCTOR TUBE WS150F WS1135 WS150 WS11H35 WS137 WS51 WS1130 WS137T WS16 WS113 STANDARD OPTIONAL MIG Machine Compatibility - Back end options to work with many popular welding machines WS140T WS180T WS0T WS140M WS180M WS0M WS140L WS180L WS0L WS140X WS180X WS0X THERMAL ARC / FIREPOWER MILLER ELECTRIC LINCOLN ESAB Fabricator 140* Fabricator 180* * Use w/ 350-174-TA180 Fabricator 190 Fabricator 10 Use w/ WM354MF Millermatic 130 Millermatic 130XP Millermatic 135 Millermatic 180 Millermatic 185 Millermatic 00 Easy-Core 15 Easy-MIG 180 Easy-MIG 140 Pro-MIG 140 Pro-MIG 180 SP140T MigMaster 173 MigMaster 160 Firepower 135 Firepower 165 Millermatic 140 Millermatic 10 MIG-Pak 140 SP180T Use w/ WS140TV-10-3035 Millermatic 150 Millermatic 11 MIG-Pak 180 Weld-Pak 15HD Millermatic 155 Millermatic 1 Powermig 140C Weld-Pak 140HD LINCOLN Millermatic 175 Powermig 180C Weld-Pak 180HD WS140H WS180H SP100 SP130 Pro-Core 15 HOBART SP100T SP170T HOBART Handler 130XL Handler 175 SP15 PLUS SP175 PLUS Handler 10 Handler 135 Handler 187 Ironman 10 Handler 140 Trek 180 04

50 AMP Gun Assemblies 350/450 AMP Gun Assemblies Spray Master Air Cooled MIG Gun Description With Tweco Rear Connections MS10-3545 103-1100.035 -.045" 0.9-1. mm 10'/ 3 m cable MS1-3545 103-1101.035 -.045" 0.9-1. mm 1'/ 4 m cable MS15-3545 103-110.035 -.045" 0.9-1. mm 15'/ 5 m cable MS0-3545 103-1103.035 -.045 0.9-1. mm 0 / 6 m cable MS5-3545 103-1108.035 -.045" 0.9-1. mm 5'/ 8 m cable With Miller Rear Connections MS10M-3545 103-1110.035" -.045" 0.9-1. mm 10'/ 3 m cable MS1M-3545 103-1111.035" -.045" 0.9-1. mm 1'/ 4 m cable MS15M-3545 103-111.035" -.045" 0.9-1. mm 15'/ 5 m cable MS0M-3545 103-1113.035 -.045 0.9-1. mm 0 / 6 m cable MS5M-3545 103-1118.035" -.045" 0.9-1. mm 5'/ 8 m cable With Euro-Kwik Rear Connections MS10X-3545 103-115.035" -.045" 0.9-1. mm 10'/ 3 m cable MS1X-3545 103-116.035" -.045" 0.9-1. mm 1'/ 4 m cable MS15X-3545 103-117.035" -.045" 0.9-1. mm 15'/ 5 m cable MS5X-3545 103-1133.035" -.045" 0.9-1. mm 5'/ 8 m cable With Lincoln Rear Connections MS1L-3545 103-1136.035" -.045" 0.9-1. mm 1'/ 4 m cable Inert Gas Equipment Description 350 AMP 450 AMP With Tweco Rear Connections MS310-116 1036-1610 MS410-116 1040-1050.045" - 1/16" 1.-1.6 mm 10'/ 3 m cable MS31-116 1036-1613 MS41-116 1040-1051.045" - 1/16" 1.-1.6 mm 1'/ 4 m cable MS315-116 1036-1615 MS415-116 1040-105.045" - 1/16" 1.-1.6 mm 15'/ 5 m cable MS315-116K4 1036-1715 MS415-116K4 1040-1530.045" - 1/16" 1.-1.6 mm 15'/ 5 m cable* MS315-116DSRS 1036-171 MS415-116DSRS 1040-1537.045" - 1/16" 1.-1.6 mm 15'/ 5 m cable** MS45-116 1040-1058.045" - 1/16" 1.-1.6 mm 5'/ 8 m cable With Miller Rear Connections MS310M-116 1036-1635 MS410M-116 1040-1060.045" - 1/16" 1.-1.6 mm 10'/ 3 m cable MS31M-116 1036-1638 MS41M-116 1040-1061.045" - 1/16" 1.-1.6 mm 1'/ 4 m cable MS315M-116 1036-1640 MS415M-116 1040-106.045" - 1/16" 1.-1.6 mm 15'/ 5 m cable MS315-116K4 1036-1716 MS415-116K4 1040-1531.045" - 1/16" 1.-1.6 mm 15'/ 5 m cable*** MS315-116DSRS 1036-170 MS415-116DSRS 1040-1536.045" - 1/16" 1.-1.6 mm 15'/ 5 m cable** MS35M-116 1036-164 MS45M-116 1040-1068.045" - 1/16" 1.-1.6 mm 5'/ 8 m cable With Euro-Kwik Rear Connections MS410X-116 1040-1075.045" - 1/16" 1.-1.6 mm 10'/ 3 m cable MS41X-116 1040-1076.045" - 1/16" 1.-1.6 mm 1'/ 4 m cable MS315X-116 1036-163 MS415X-116 1040-1077.045" - 1/16" 1.-1.6 mm 15'/ 5 m cable With Lincoln Rear Connections MS410L-116 1040-1070.045" - 1/16" 1.-1.6 mm 10'/ 3 m cable MS31L-116 1036-1646.045" - 1/16" 1.-1.6 mm 1'/ 4 m cable MS315L-116 1036-1647 MS415L-116 1040-107.045" - 1/16" 1.-1.6 mm 15'/ 5 m cable MS315L-116K4 1036-1717 MS415L-116K4 1040-1533.045" - 1/16" 1.-1.6 mm 15'/ 5 m cable*** MS315L-116DSRS 1036-17 MS415L-116DSRS 1040-1538.045" - 1/16" 1.-1.6 mm 15'/ 5 m cable MS45L-116 1040-1071.045" - 1/16" 1.-1.6 mm 5'/ 8 m cable * w/locking trigger ** w/dual schedule trigger *** w/knucklehead option 05

Inert Gas Equipment Spray Master Air Cooled MIG Gun Spray Master MIG Gun Replacement Parts Tweco No. 50 AMP 350 AMP 450 AMP Description 1 Nozzles (not shown) Contact Tips (not shown) 3 Diffusers (not shown) 4 63J-3 66J-3 1630-111 1660-1836 Nozzle Insulators 5 Conductor Tubes (not shown) 6 15 00-15 Gun Hanger 7 MS84 060-130 Handle (Standard) 8 MS84LC 060-17 Handle (Locking Trigger) 9 MS84DSRS 606-18 Handle (Dual Schedule) 10 ELC14FM 060-646 Binder Posts & Screws 11 1FMS 00-13 Binder Posts & Screws 1 13 14 15 16 17 18 MS10 170-115 MS1 170-116 MS15 170-117 MS5 170-118 MS10X 170-106 MS1X 170-107 MS15X 170-108 MS5X 170-109 MS94RSW 060-694 ELC94-BL 060-671 ELC94 060-647 MS94LC 060-693 136 060-690 MS144 060-131 MS310 1730-035 MS31 1730-036 MS315 1730-037 MS35 1730-038 MS310X 1730-010 MS31X 1730-011 MS315X 1730-01 MS35X 1730-013 MS410 1740-115 MS41 1740-116 MS415 1740-117 MS45 1740-118 MS410X 1740-11 MS41X 1740-1 MS415X 1740-13 MS45X 1740-14 Rocker Switch (Dual Schedule) Trigger Blade Assembly Trigger (Standard) Trigger (Locking) Cable Clamp Front Strain Relief Spring & Cap Cablehoz Assembly (Direct Plug) Cablehoz Assembly (Euro) 19 0 1 3 MS10-RK 060-13 EPG17-H 00-191 17X-M 00-181 35RSSR 060-035 MS104-RK 060-133 350-170HK 035-169 174X-M 040-181 C6RC 060-041 X6RC 060-006 MS354-DSM 060-140 4 Connector Plug (not shown) 5 Conduit Assembly (not shown) NS TCR50 9900-1150 Rear Strain Relief Spring & Cap Front Cable Connector Repair Kit (Direct Plug and Euro) Rear Cable Connector Repair Kit (Direct Plug) Rear Cable Connector Repair Kit (Euro) Rear Case (Direct Plug) Rear Case (Euro) Miller Control Wire Protective Cable Wrap (50ft/box) 06

50 Amp - Spray Master TM Mig Gun Spray Master Air Cooled MIG Gun Inert Gas Equipment 450 Amp - Spray Master TM Mig Gun 07

Inert Gas Equipment Spray Master Consumables Nozzles 50 AMP Guns Fits Diffuser HD5-11 (150-1130) Nozzle Style Standard slip-on type (1/8" tip recess) Optional slip-on type (tip flush) 3/8" 9.5 mm bore HD-37 10-1305 HD-37F 10-1310 1/" 1.7 mm bore HD-50 10-1306 HD-50F 10-1311 * 50 AMP guns ship w/ standard 1/" / 1.7 mm bore nozzle HD-50 (10-1306) and 11H Series Contact Tip Tweco 5/8" 15.9 mm bore HD-6 10-1307 HD-6F 10-131 350 AMP Guns Fits Diffuser EL5CT-16 (1560-1107) 450 AMP Guns Fits Diffuser HD54-16 (1540-1136) Nozzle Style Standard CT type (1/8" tip recess) Optional CT type (tip flush) Optional CT type (tip protruded) Optional CT type (heavy duty) 3/8" 9.5 mm bore ELCT-37 160-165 ELCT-37F 160-1635 1/" 1.7 mm bore ELCT-50 160-166 ELCT-50F 160-1636 ELCT-50P 160-1691 5/8" 15.9 mm bore ELCT-6 160-167 ELCT-6F 160-1637 ELCT-6P 160-169 ELCT-6H 160-169 * 350 AMP guns ship w/ standard 5/8" / 15.9 mm bore nozzle ELCT-6 (160-167) and 16S Series Contact Tip 3/4" 19.1 mm bore ELCT-75 160-168 Nozzle Style Standard slip-on type (1/8" tip recess) Optional slip-on type (tip flush) Optional slip-on type (1/8" tip recess) heavy duty Optional slip-on type (tip flush) heavy duty 1/" 1.7 mm bore HD4L-50 140-100 HD4L-50F 140-104 HD4-50 140-140 5/8" 15.9 mm bore HD4L-6 140-101 HD4L-6F 140-105 HD4-6 140-141 HD4-6F 140-136 * 450 AMP guns ship w/ standard 5/8" / 15.9 mm bore nozzle HD4L-6 (140-101) and 16S Series Contact Tip 3/4" 19.1 mm bore HD4L-75 140-10 HD4L-75F 140-106 HD4-75 140-14 HD4-75F 140-137 Contact Tips Conduit Wire Size In. / Metric.03" 0.6 mm.030" 0.8 mm.035" 0.9 mm.040" 1.0 mm.045" 1. mm.05" 1.3 mm 1/16" 1.6 mm 5/64".0 mm Tip I.D. In. / Metric.031" 0.79 mm.038" 0.97 mm.044" 1.1 mm.048" 1. mm.054" 1.37 mm.064" 1.65 mm.073" 1.85 mm.090".9 mm 50 AMP 350 & 450 AMP 11-3 1110-1100 11H-30 1110-101 11H-35 1110-10 11H-40 1110-103 11H-45 1110-104 16S-35 1160-110 16S-40 1160-1103 16S-45 1160-1104 16S-5 1160-1105 16S-116 1160-1106 16S-564 1160-1109 Wire Size 50 AMP In. / Metric For Use With Steel Wire.03" 0.6 mm.030" /.035" 0.8 / 0.9 mm.040" /.045" 1.0 / 1. mm.040" /.045" 1.0 / 1. mm 4-3-15 140-1103 4-3035-15 140-1113 4-4045-15 140-113 4-4045-5 140-115 For Use With Aluminum Wire.035" / 3/64" 0.9 / 1. mm 4N-3545-15 140-1003 Wire Size In. / Metric.035" /.045" 0.9 / 1. mm.035" /.045" 0.9 / 1. mm.05" / 1/16" 1.3 / 1.6 mm.05" / 1/16" 1.3 / 1.6 mm 5/64".0 mm.030" / 3/64" 0.8" / 1. mm 350 & 450 AMP 44-3545-15 1440-1103 44-3545-5 1440-1105 44-116-15 1440-1113 44-116-5 1440-1115 44-564-15 1440-113 44N-3545-15 1440-1003 3/64" AL 1. mm.059" 1.50 mm 11AH-364 1110-113 16AS-364 1160-1113 1/16" AL 1.6 mm.08".08 mm 16AS-116 1160-1114 08

No. 1 MIG Gun Assemblies with Standard Consumables 160 AMP Air Cooled No. 1 No. MIG Gun Assemblies with Standard Consumables 00 AMP Air Cooled No. No. 3 MIG Gun Assemblies with Standard Consumables 300 AMP Air Cooled No. 3 Description w/ Tweco Rear Connection (Requires Adapter Plug).035" / 0.9 10' / 3 m cable 10-3035 100-1111.035" / 0.9 1' / 4 m cable 1-3035 100-111.035" / 0.9 15' / 5 m cable 15-3035 100-1113 No. 1, & 3 MIG Gun Assemblies Description w/ Tweco Rear Connection (Requires Adapter Plug).035" / 0.9 10'/ 3 m cable 110-3035 1010-1111.035" / 0.9 1'/ 4 m cable 11-3035 1010-111.035" / 0.9 15'/ 5 m cable 115-3035 1010-1113.035 / 0.9 0 / 6 m cable 10-3035 1010-1114 Description w/ Tweco Rear Connection (Requires Adapter Plug) w/ Euro-Kwik Rear Connection.045" / 1. 10'/ 3 m cable 110-4045 1010-111 X110-4045 1010-161.045" / 1. 1'/ 4 m cable X11-4045 1010-16.045" / 1. 15'/ 5 m cable 115-4045 1010-113 X115-4045 1010-163.045 / 1. 0 / 6 m cable 10-4045 1010-114 w/ Miller Connection w/ Lincoln Rear Connection.035" / 0.9 10'/ 3 m cable M110-3035 1010-1131.035" / 0.9 1'/ 4 m cable M11-3035 1010-1133.035" / 0.9 15'/ 5 m cable M115-3035 1010-1135 L115-3035 1010-1145 * No. 1 guns ship w/ standard 1/" / 1.7 mm bore nozzle 1-50 (110-1110) and 11 Series Contact Tip w/ Euro-Kwik Rear Connection.045" / 1. 10' / 3 m cable 10-4045 100-111 X10-4045 100-161.045" / 1. 1' / 4 m cable X1-4045 100-16.045" / 1. 15' / 5 m cable 15-4045 100-113 X15-4045 100-163.045" / 1. 15' / 5 m cable 15-4045K4 100-1660 w/ Miller Connection w/ Lincoln Rear Connection.035" / 0.9 10' / 3 m cable M10-3035 100-1130 L10-3035 100-1140.035" / 0.9 1' / 4 m cable M1-3035 100-113 L1-3035 100-114.035" / 0.9 15' / 5 m cable M15-3035 100-1134 L15-3035 100-1144.045" / 1. 10' / 3 m cable M10-4045 100-1131.045" / 1. 1' / 4 m cable M1-4045 100-1133.045" / 1. 15' / 5 m cable M15-4045 100-1135.045" / 1. 15' / 5 m cable M15-4045K4 100-1661 * No. guns ship w/ standard 1/" / 1.7 mm bore nozzle -50 (10-1110), nozzle insulator 3 (130-1100) and 14 Series Contact Tip w/ Euro-Kwik Rear Connection.045" / 1. 10' / 3 m cable 310-3545 1030-1101 X310-3545 1030-1601.045" / 1. 1' / 4 m cable 31-3545 1030-110 X31-3545 1030-160.045" / 1. 15' / 5 m cable 315-3545 1030-1103.045 / 1. 0 / 5 m cable 30-3545 1030-1104.045 / 1. 5 / 5 m cable 35-3545 1030-1105 1/16" / 1.6 15' / 5 m cable 315-116 1030-1113 1/16 / 1.6 5 / 5 m cable 35-116 1030-1115 w/ Miller Connection w/ Lincoln Rear Connection.045" / 1. 10' / 3 m cable M310-3545 1030-1130 L310-3545 1030-1140.045" / 1. 1' / 4 m cable M31-3545 1030-1133 L31-3545 1030-1143.045" / 1. 15' / 5 m cable M315-3545 1030-1136 L315-3545 1030-1146 * No. 3 guns ship w/ standard 5/8" / 15.9 mm bore nozzle 3-6 (130-110) and 14 Series Contact Tip Inert Gas Equipment 09

Inert Gas Equipment No. 4 & 5 MIG Gun Assemblies No. 4 MIG Gun Assemblies with Standard Consumables 400 AMP Air Cooled No. 4 Description w/ Tweco Rear Connection (Requires Adapter Plug) w/ Euro-Kwik Rear Connection Tweco.045" / 1. 10'/ 3 m cable 410-3545 1040-1101 X410-3545 1040-1601.045" / 1. 1'/ 4 m cable 41-3545 1040-110 X41-3545 1040-160.045" / 1. 15'/ 5 m cable 415-3545 1040-1103 X415-3545 1040-1603.045 / 1. 15 / 5 m cable 415-3545K4 1040-1686 (knucklehead option) 1/16" / 1.6 10'/ 3 m cable 410-116 1040-1111 1/16" / 1.6 1'/ 4 m cable 41-116 1040-111 1/16" / 1.6 15'/ 5 m cable 415-116 1040-1113 X415-116 1040-1613 5/64" /.0 15'/ 5 m cable 415-564 1040-113 w/ Miller Connection w/ Lincoln Rear Connection.045" / 1. 10'/ 3 m cable M410-3545 1040-1130 L410-3545 1040-1140.045" / 1. 1'/ 4 m cable M41-3545 1040-1133 L41-3545 1040-1143.045" / 1. 15'/ 5 m cable M415-3545 1040-1136 L415-3545 1040-1146.045 / 1. 15 / 5 m cable M415-3545K4 1040-1688 (knucklehead option).045 / 1. 15 / 5 m cable L415-3545K4 1040-1689 1/16" / 1.6 10'/ 3 m cable M410-116 1040-1131 L410-116 1040-1141 1/16" / 1.6 1'/ 4 m cable M41-116 1040-1134 L41-116 1040-1144 1/16" / 1.6 15'/ 5 m cable M415-116 1040-1137 L415-116 1040-1147 5/64" /.0 15'/ 5 m cable M415-564 1040-1138 * No. 4 guns ship w/ standard 5/8" / 15.9 mm bore nozzle 4A-6 (140-110), nozzle insulator 34A (1340-1100) and 14 Series Contact Tip. No. 5 MIG Gun Assemblies with Standard Consumables 500 AMP Air Cooled No.5 No. 6 MIG Gun Assemblies with Standard Consumables 600 AMP Air Cooled No. 6 Description w/ Tweco Rear Connection (Requires Adapter Plug) w/ Euro-Kwik Rear Connection 1/16" / 1.6 15'/ 5 m cable 515-116 1050-1113 X515-116 1050-1613 1/16 / 1.6 5 / 8 m cable 55-116 1050-1115 3/3" /.4 10'/ 3 m cable 510-33 1050-1131 3/3" /.4 15'/ 5 m cable 515-33 1050-1133 w/ Miller Connection w/ Lincoln Rear Connection 1/16" / 1.6 15'/ 5 m cable M515-116 1050-1173 3/3" /.4 15'/ 5 m cable L515-33 1050-164 * No. 5 guns ship w/ standard 5/8" / 15.9 mm bore nozzle 5CT-6 (150-140), nozzle insulator 35CT (1350-1400) and 15H Series Contact Tip Note: All No.5 MIG Guns are furnished with 5" Radius conductor tubes. Description w/ Tweco Rear Connection (Requires Adapter Plug) 3/3" /.4 15'/ 5 m cable 615-33 1060-117 w/ Miller Connection 3/3" /.4 15'/ 5 m cable M615-33 1060-14 * No. 6 guns ship w/ standard 3/4" / 19.1 mm bore nozzle 6CT-75 (160-1430), nozzle insulator 36CT (1360-1400) and 16S Series Contact Tip Note: All No.6 Mig-Guns are furnished with 5" radius conductor tubes. 10

Professional #1, #, #3, #4, #5 & #6 MIG-Gun Replacement Parts No. 1-6 MIG Gun Replacement Parts Inert Gas Equipment 11

Inert Gas Equipment No.1-6 MIG Gun Replacement Parts Professional #1, #, #3, #4, #5 & #6 MIG-Gun Replacement Parts Item No. Description No. 1 No. No. 3 No. 4 No. 5 No. 6 1 Nozzles Standard consumable parts Contact Tips Standard consumable parts 3 Diffusers Standard consumable parts 4 Nozzle Insulators Standard consumable parts 5 Conductor Tubes Standard consumable parts 6 Gun Hanger 015 00-15 7 8 9 10 11 1 13 14 15 16 17 18 19 0 1 Handle Assembly - (Standard) 0081 010-081 0083 030-083 084A 040-084 Handle Assembly - (Dual Schedule) N/A 84DS 040-085 Binder Post & Screw - (4 Required) 1FM 00-1 Trigger Control Wire Terminal - (Standard - EA) Trigger Control Wire Terminal - (Dual Schedule - 4 EA) 44DS 040-45 Trigger Assembly - (Standard) 0091 010-091 Trigger Blades 091C 010-093 N/A 009 00-09 09C 00-094 044 040-4 44LK 040-46 0154 040-154 0085 050-085 N/A 14FM 040-14 094R 040-096 094C 040-093 Trigger Assembly - (Dual Schedule) N/A 94LK-DS 040-099 Trigger Assembly - (Locking) N/A 94L 040-094 Front Cable Connector 101R 010-103 010 00-10 Cable Clamp 0136 060-690 Front Strain Relief Spring 141-6-SPR 010-143 Cablehoz 000 170-100 Rear Strain Relief Spring Rear Case - Direct Plug Rear Case - Euro Control Wire - (Standard) Control Wire - (Dual Schedule) 14-6-SPR 00-144 0300 1730-100 35RSSR 060-035 R6RC 060-040 X6RC 060-006 MS354-DSM 060-140 194DS 040-195 Rear Cable Connector - Direct Plug 0104 040-104 Rear Cable Connector - Euro Adapter - Direct Plug 17X-M 00-181 M170-H 00-165 174X-M 040-181 M170-4H 00-166 144-6-SPR 040-146 0400 1740-100 3 Connector Plug 4 Conduit Assembly Standard consumable parts NS Protective Cable Wrap (50Ft/Box) TCR50 9900-1150 0104 040-104 0500 1750-100 N/A 145-6-SPR 050-147 176X-M 060-181 M170-5H 00-167 600S 1760-100 Tweco 1

MIG Gun Direct Plug and Control Wire Jumpers MIG Gun Direct Plug and Control Wire Jumpers Inert Gas Equipment TWECO STYLE 100-450 AMP 500-600 AMP MILLER STYLE 100-450 AMP 500-600 AMP Item No. Description Item No. Description 1 Connector Plug Connector Plug (Extra Long) 350-174H 035-110 350-174HXL 035-116 176SH 060-177 N/A 1 Connector Plug Connector Plug (Extra Long) 350-174MH 035-111 350-174MHXL 035-114 EL176MH 060-178 N/A O-Ring Only (Package of 10) 4S 064-059 5S 050-6 Wire Guide Assembly Only 174M-N 040-184 175M-N 050-178 3 Set Screw Only (Package of 10) 44CS 040-046 3 O-Ring Only (Package of 10) 4S 064-059 4 Thermal Arc Control Jumper Cord MS-354-TAJ 060-139 4 Set Screw Only (Package of 10) 44CS 040-046 LINCOLN STYLE 100-450 AMP 500-600 AMP Item No. Description 1 Connector Plug Gas Nipple 3 Set Screw Only (Package of 10) 4 Gas Hose With Clamp 5 Gas Hose Clamp Only 6 Lincoln Control Jumper Cord 350-174LH 035-11 35-170-5 000-046 44CS 040-046 AK353 64-300 AK-353-A 64-30 MS354DS-LJ 060-137 EL176LH 060-680 13

Inert Gas Equipment No.1,, 3, 4, & 5 MIG Gun Replacement Parts / Wire Conduits - All Guns All Euro-Kwik MIG Guns 38 37 36 3 Tweco 39 35 34 18 3 31 Item No. Description No. 1 No. No. 3 No. 4 No. 5 No. 6 31 3 34 35 36 Screw 37 Rear support (Euro-Kwik guns) Rear Case (Euro-Kwik guns) Power connection (Euro-Kwik guns) Rear connector (Euro-Kwik guns) O-ring Euro-Kwik guns 38 Conduit cap Euro-Kwik guns 39 Connector nut Euro-Kwik guns 350R-30-10 035-35 X6RC 060-006 17X-M 00-181 174EX-1 040-76 4-MS 011-004 174EX-1G 040-8 174EX-1C 040-79 174X- 040-177 350R-30-10 035-35 X6RC 060-006 17X-M 00-181 174EX-1 040-76 4-MS 011-004 174EX-1G 040-8 174EX-1C 040-79 174X- 040-177 350R-30-10 035-35 X6RC 060-006 17X-M 00-181 174EX-1 040-76 4-MS 011-004 174EX-1G 040-8 174EX-1C 040-79 174X- 040-177 350R-30-10 035-35 X6RC 060-006 17X-M 00-181 174EX-1 040-76 4-MS 011-004 174EX-1G 040-8 174EX-1C 040-79 174X- 040-177 350R-30-10 035-35 X6RC 060-006 174EX-1 040-76 4-MS 011-004 174EX-1G 040-8 174EX-1C 040-79 174X- 040-177 350R-30-10 035-35 X6RC 060-006 174EX-1 040-76 4-MS 011-004 174EX-1G 040-8 174EX-1C 040-79 174X- 040-177 Wire Conduits - All Guns Wire Size.03" 0.6 m.030" -.035" 0.8-0.9 mm.040" -.045" 1.0-1. mm.035" -.045" 0.9-1.0 mm.05" - 1/16" 1.3-1.6 mm 5/64".0 mm 3/3".4 mm 7/64".8 mm 1/8" 3. mm.030" -.035" AL 0.8-0.9 mm No. 3 & 4 No. 5 & 6 MINI-MIG Gun (All Models) No. 1 & (All Models) (All Models & No. 5 X-Guns) (All Except X-Guns) 15' / 5 m 0' / 6 m 15' / 5 m 5' / 8 m 15' / 5 m 5' / 8 m 15' / 5 m 5' / 8 m 3-40-15 1400-113 35-40-15 1400-1133 45-40-15 1400-1143 35TF-40-10* 1400-1031 35-40-0 1400-1134 4-3-15 140-1103 4-3035-15 140-1113 4-4045-15 140-113 4N-3545-15 140-1003 1/16" 1.6 mm *TF liners not recommended for lengths over 10'/ 3 m 4-3035-5 140-1115 4-4045-5 140-115 44-3545-15 1440-1103 44-116-15 1440-1113 44-564-15 1440-113 44N-3545-15 1440-1003 44N-116-15 1440-101 44-3545-5 1440-1105 44-116-5 1440-1115 44-564-5 1440-115 45-3545-15 1450-1103 45-116-15 1450-1113 45-564-15 1450-113 45H-33-15 1450-1133 45H-764-15 1450-1143 45-18-15 1450-1153 45N-3545-15 1450-1003 45N-116-15 1450-1013 45-3545-5 1450-1105 45-116-5 1450-1115 45-564-5 1450-115 4-3035-15 44-3545-15 14

Standard Nozzles & Nozzle Insulators- All Guns Standard Nozzles & Nozzle Insulators - All Guns Inert Gas Equipment 1 Series Series HD Series 3 Series 3T Series 3H Series Gun Model Nozzle Style Insulator 3/8" / 9.5 mm Bore 1/" / 1.7 mm Bore 5/8" / 15.9 mm Bore 3/4" / 19.1 mm Bore 1 Series Mini-Mig-Gun (Standard) No. 1 (Standard) Self-insulated, tip flush Self-insulated, 1/8" tip recess Optional, tapered, self-insulated, (*1/8" tip recess), (**tip flush) Series: * 034A Insulator must be used with this series nozzle. No. (Standard) Adjustable, recess to projection Optional, short-stop, 1/8" tip recess 003 130-1100 003 130-1100 3 Series: * Use 5FN diffuser with this series on a # MIG gun. No. 3 Self-insulated, 1/8" tip recess (Standard) Self Insulated, 3/8" tapered Optional, self-insulated, tip flush Optional, heavy duty self-insulated, 1/8" tip recess Optional, heavy duty self-insulated, tip flush 1-37-F 110-110 1-37 110-1100 1T-37* 110-1300 1T-37-F** 110-130 -37-SS 10-1101 3-37 130-1100 3T-37 130-1300 3-37-F 130-110 1-50-F 110-111 1-50 110-1110 -50 10-1110 -50-SS 10-1111 3-50 130-1110 3-50-F 130-111 3H-50 130-110 1-6-F 110-11 1-6 110-110 -6 10-110 -6-SS 10-111 3-6 130-110 3-6-F 130-11 3H-6 130-10 3H-6-F 130-1 3-75 130-1130 3-75-F 130-113 3H-75 130-130 15

Inert Gas Equipment Standard Nozzles & Nozzle Insulators - All Guns / Optional Arc Spot Standard Nozzles & Nozzle Insulators - All Guns Tweco 034A 4AT-37-SS 4A-50 4CT-6-F 5I-75 Gun Model Nozzle Style Insulator 3/8" / 9.5 mm Bore 1/" / 1.7 mm Bore 5/8" / 15.9 mm Bore 3/4" / 19.1 mm Bore 4 Series No. 4 (Standard) 5 Series No. 5 (Standard) Adjustable, recess to projection Optional, short-stop, 1/8" Tip recess Optional, ss tapered, 1/8" Tip recess Optional, heavy duty, adjustable Optional, heavy duty, short stop Optional, coarse thread, 1/8" Tip recess Optional, coarse thread Tip flush Optional, coarse thread, 1/" Tip recess Coarse thread, 1/8" Tip recess Optional, self-insulated, 1/8" Tip recess 034A 1340-1100 034A 1340-1100 034A 1340-1100 034A 1340-1100 034A 1340-1100 34CT 1340-1400 34CT 1340-1400 34CT 1340-1400 35CT 1350-1400 4A-37-SS 140-1101 4AT-37-SS 140-1301 4CT-37-S 140-1404 4A-50 140-1110 4A-50-SS 140-1111 4AH-50 140-110 4AH-50-SS 140-111 4CT-50-S 140-1414 4CT-50-F 140-141 5CT-50 150-1410 4A-6 140-110 4A-6-SS 140-111 4AH-6 140-10 4AH-6-SS 140-11 4CT-6-S 140-144 4CT-6-F 140-14 4CT-6-R 140-143 5CT-6 150-140 5I-6 150-110 4A-75 140-1130 4A-75-SS 140-1131 4AH-75 140-130 4AH-75-SS 140-131 4CT-75-S 140-1434 4CT-75-R 140-1433 5CT-75 150-1430 5I-75 150-1130 6 Series 5/8" / 15.9 mm Bore 3/4" / 19.1 mm Bore 7/8" / mm Bore No. 6 (Standard) Self-insulated, 1/8" Tip 6I-6 6I-75 6I-87 recess 160-110 160-1130 160-1140 Optional, coarse thread, 1/8" Tip recess 36CT 1360-1400 6CT-6 160-140 6CT-75 160-1430 Optional Arc Spot 1-6-FAS 5CT-15-FAS Type Mini & No. 1 No. No. 3 No. 4 No. 5 Flat Arc Spot 1-6-FAS 110-150 (1/" bore) -6-FAS 10-150 (5/8" bore) 3-75-FAS 130-1530 (3/4" bore) 4A-6-FAS 140-150 (3/4" bore) 4A-75-FAS 140-1530 (5/8" bore) 4A-100-FAS 140-1550 (3/4" bore) 5CT-15-FAS 150-1560 (1-1/4" bore) 5CT-16-FAS 150-1570 (1-5/8" bore) 16

Standard Diffusers Nozzles & Standard Diffusers / Standard Conductor Tubes Inert Gas Equipment 005 55SW Mini MIG Gun No. 1 No. No. 3 & 4 No. 5 35-50 1500-1100 (standard) 0051 1510-1101 (standard) 005 150-1101 (standard) 054A 1540-1103 (standard) 55SW 1550-1101 (note: 1) (use with 16S tips) 55S-SW 1550-1110 (note: 1) (use with 16S tips) 55S-SWL 1550-110 (note: 4) 51-3 1510-1100 (use with.03 wire) 5-3 150-1100 (use with.03 wire) 0055 1550-1100 (note: ) (use with 16S tips) 55S-H 1550-1111 (note:,3) 5FN 150-110 (use with No. 3 & 4 nozzles) 055H 1550-110 (note: 3) Diffusers for No. 5 & 6 MIG Guns must be used with conduits as follows: Note: 1 = 45-3545, 45-116, 45N-3545 (small wire) Note: = 45-564, 45N-116 Note: 3 = 45H-33, 45H-764, 45H-18 Note: 4 = All Note & 3 conduits Standard Conductor Tubes 61-60 6J-60 65J-60 Degree/ Bend Mini No. 1 No. No. 3 No. 4 45 60 (standard) 80 180 35-60-45 1600-1101 35-60-60 1600-110 35-60-80 1600-1103 61-45 1610-1101 61-60 1610-110 61-180 1610-1104 6J-45 160-1300 6J-60 160-1301 6J-180 160-1113 63J-45 1630-1110 63J-60 1630-1111 63J-80 1630-111 63J-180 1630-1113 64J-45 1640-1105 64J-60 1640-1106 No. 5 No. 6 5" Radius 5" Radius 65J-45 1650-1110 65J-60 1650-1111 65J-80 1650-111 63J-180 1650-1113 66J-45 1660-185 66J-60 1660-186 66J-80 1660-187 Optional Standard Conductor Tubes MINI-MIG Gun Conductor Tube Extensions No. 3 & 4 No. 5 No. 3 & 4 No. 5 Extension 4" 180 64A-4EX 1640-1301 65-4EX 1650-1301 Extension 45 64EX-45 1640-1311 65EX-45 1650-1311 Flexible conductor tube 3560SFLX4-80 1600-1141 Extension 6" 180 64A-6EX 1640-130 65-6EX 1650-130 Extension 60 64EX-60 1640-131 65EX-60 1650-131 Extension 8" 180 64A-8EX 1640-1303 65-8EX 1650-1303 Note: Extensions are designed to fit standard conductor tubes. Conduits must be replaced when installing conductor tube extensions. 17

Inert Gas Equipment Contact Tips Contact Tips - All Guns Standard, Tapered & Heavy Duty Styles Tweco 11 Series 14T Series 16S Series Wire Size Inches/ Metric Tip I.D. Inches/ Metric Mini & No. 1 No., 3, & 4 No. 5 No. 6 Standard.03" / 0.6 mm.031" / 0.79 mm 11-3 1110-1100.030" / 0.8 mm.038" / 0.97 mm 11-30 1110-1101.035" / 0.9 mm.044" / 1.1 mm 11-35 1110-110.040" / 1.0 mm.048" / 1. mm 11-40 1110-1103.045" / 1. mm.054" / 1.37 mm 11-45 1110-1104.05" / 1.3 mm.064" / 1.65 mm 1/16" / 1.6 mm.073" / 1.85 mm 5/64" /.0 mm.090" /.9 mm 3/3" /.4 mm.106" /.67 mm 7/64" /.8 mm.10" / 3.05 mm 1/8" / 3. mm.144" / 3.66 mm 3/64" AL / 1. mm.059" / 1.50 mm 1/16" AL 1. mm.08" / 1.85 mm Optional Heavy Duty 11H-30 1110-101 11H-35 1110-10 11H-40 1110-103 11H-45 1110-104 11AH-364 1110-113 Optional Tapered 11T-3 1110-1300 11T-30 1110-1301 11T-35 1110-130 11T-40 1110-1303 11T-45 1110-1304 Standard 14-3 1140-1100 14-30 1140-1101 14-35 1140-110 14-40 1140-1103 14-45 1140-1104 14-5 1140-1105 14-116 1140-1106 14-564 1140-1109 14A-364 1140-1113 Optional Heavy Duty 14H-35 1140-10 14H-40 1140-103 14H-45 1140-104 14H-5 1140-105 14H-116 1140-106 14H-564 1140-109 14AH-364 1140-113 14AH-116 1140-114 Optional Tapered 14T-3 1140-1300 14T-30 1140-1301 14T-35 1140-130 14T-40 1140-1303 14T-45 1140-1304 14T-5 1140-1305 14T-116 1140-1306 Standard Recess 15H-35 1150-10 15H-45 1150-104 15H-5 1150-105 15H-116 1150-106 15H-564 1150-109 15H-33 1150-110 15H-764 1150-111 15H-18 1150-11 15AH-364 1150-113 15AH-116 1150-114 Standard Optional 3/8" Tip 1/8" Recess H D Tip 15HFC-45 1150-154 15HFC-5 1150-155 15HFC-116 1150-156 15HFC-564 1150-159 15HFC-33 1150-160 15HFC-764 1150-161 15HFC-18 1150-16 16S-35* 1160-110 16S-40* 1160-1103 16S-45* 1160-1104 16S-5* 1160-1105 16S-116* 1160-1106 16S-564* 1160-1109 16S-33* 1160-1110 16S-764* 1160-1111 16S-18* 1160-111 16AS-364* 1160-1113 16AS-116* 1160-1114 * 16S Tips- when used in No. 5 Mig-Guns require a 55S style diffuser. Use 55S-SWL or 55S-HL for 5/3 tip recess. Use 55S-SW or 55S-H for 3/8 tip recess. Tapered 3/8" Tip H D Tip 16ST-35 1160-1135 16ST-40 1160-1136 16ST-45 160-1137 16ST-5 1160-1138 16ST-116 1160-1139 18

TwecoTong Electrode Holders / Parts / Ground Devices Welding Accessories TwecoTong Electrode Holders * Feature reversible top and bottom insulators. Efficient 6-position jaw patterns. Fully insulated. Protected springs. Ball-point cable connection. A-14-HD AMP Capacity Description Body Alloy AMP Capacity Electrode Capacity Electrode Capacity Cable Connection Capacity Cable Connection Capacity Length (inches) A-53* 9110-1101 00 Copper thru 5/3" Ball-point thru /0 8-1/" 16 A-316* 9110-110 50 Copper thru 3/16" Ball-point thru /0 9-1/4" 35 A-73* 9110-1103 300 Copper thru 7/3" Ball-point thru /0 10" 54 A-14 9110-1104 350 Copper thru 1/4" Ball-point thru 4/0 11" 79 A-14-HD 9110-1105 400 Copper thru 1/4" Double ball-point thru 4/0 1" 305 A-38-HD 9110-1106 500 Copper thru 3/8" Double ball-point thru 4/0 13-1/4" 336 * Sold in clamshell packaging. Length (inches) 04TT 910-1000 Tweco-Tite holder 400 1/16" thru 1/4" thru 3/0 9" 9 Length (mm) Length (mm) 6 TwecoTong Electrode Holder Parts Description A-53 A-316 A-73 A-14 A-14-HD A-38-HD Tip Insulation w/ screw Body insulation Molded handle Handle screws Cable connector screw A-53-1P (9910-10) A-53-3 (9910-103) A-53-7 (9910-107) AL-300-1 (9910-71) A-53-4 (9910-14) A-53-1P (9910-10) A-53-3 (9910-103) A-316-7 (9910-07) AL-300-1 (9910-71) A-53-4 (9910-14) A-73-1P (9910-30) A-53-3 (9910-103) A-73-7 (9910-307) AL-300-1 (9910-71) A-53-4 (9910-14) A-73-1P (9910-30) A-14-3 (9910-403) A-14-7 (9910-407) AL-300-1 (9910-71) A-14-4 (9910-44) A-73-1P (9910-30) A-14-3 (9910-403) A-14-HD-7 (9910-507) AL-300-1 (9910-71) A-14-4 (9910-44) A-38-HD-1P (9910-60) A-38-HD-3 (9910-603) A-38-HD-7 (9910-607) AL-300-1 (9910-71) A-14-4 (9910-44) Heavy Duty Rotary Ground Devices Tweco Roto-Ground is a highly efficient device for grounding weldments while being rotated on turning rolls or positioners. The " shaft shoulders up to a steel nut which the user welds to his rotating work or fixture. Tweco Roto-Grounds have no brushes, springs or mercury. A simple tension adjusting bolt provides maximum efficiency. GCRG-140 RG-140 RG-40 RG-440 RG-640 AMP Capacity Cable Capacity No. of Heads Shaft Stud Length (inches) Length (mm) GCRG-140 910-1314 400 1-4/0 1 3/4" NC RG-140 950-1114 400 1-4/0 1 3/4" NC 8" 03 RG-30 950-113 600-3/0 1 1-1/8" NC 10-1/4" 60 RG-40 950-114 800-4/0 1 1-3/8" NC 10-5/8" 70 RG-440 950-1144 1500 4-4/0 1-3/8" NC 10-5/8" 70 RG-640 950-1164 000 6-4/0 3 1-3/8" NC 10-5/8" 70 370

Ground Clamps Roto-Work Grounding Clamps Tweco Roto-Work Ground Clamps are designed primarily to work in conjunction with the Tweco Roto-Ground Device. However, they may also be used for other high amperage grounding applications. The Roto-Ground shaft screws into the tapped back of the Roto-Work Clamp. The clamp is quickly attached or moved from one rotating weldment or fixture to the other without removing the Roto-Ground from it. Saves welding down time. Roto-Work Clamps are made from 98% copper alloy. They come in 600, 100 and 000 ampere capacity. No. WCRG-600 ampere and WCRG-100 ampere have single tightening screws. No. WCRG-000 has two tightening screws. Number WCRG-600 works only with No. RG-30 due to its smaller shaft size. Large tightening screws and ample contact surface area provide cool, efficient operation. AMP Capacity Fits Roto-Ground GC-600-75 Clamp Contact Throat Height Throat Dept Over-all Height Over-all Width Tapped For WCRG-600 955-1106 600 RG-30 6-1/4 sq/in -1/" -1/" 5-3/4" -1/" 1-1/8" NC WCRG-100 955-111 100 RG-40/440 9 sq/in 3" 3" 6-3/4" 3" 1-3/8" NC WCRG-000 955-110 000 RG-440/640 1 sq/in 3" 3" 6-3/4" 4" 1-3/8" NC GC-600-75 955-1075 Clamp only - tapped 3/4" for RG-140 Roto-Ground only Welding Accessories 6 Ground Clamps GC-300 Ground Clamp 98% copper alloy jaws Fully insulated spring SGC-300 Ground Clamp Steel body with direct ground through copper alloy jaw SGC-500 w/copper shunt SGC-300 w/o copper shunt FGC-300 Ground Clamp 98% copper alloy 00, 300 & 500 AMP flat jaw GC-300 AMP Capacity SGC-300 Jaw Opening Cable Connection Capacity FGC-300 Length (inches) GC-00 905-110 00 1" - depth 3" Ball-point thru 1/0 6" 157 GC-300* 905-1130 300 1-1/"- depth 4" Ball-point thru 3/0 8-1/" 16 GC-500 905-1150 500 " - depth 5-1/4" Ball-point thru 4/0 10" 54 SGC-300 905-130 300 " - depth 1-3/4" 1/" stud connection 9" 8 SGC-500 905-150 500 " - depth 1-3/4" 1/" stud connection 9" 8 FGC-00 905-130 00 5/8" - depth " Ball-point thru 1/0 5" 17 FGC-300 905-1330 300 1" - depth 3-1/" Ball-point thru 3/0 7-1/4" 184 FGC-500 905-1350 500 1-1/" - depth 3-1/4" Ball-point thru 4/0 9-1/4" 34 * Sold in clamshell packaging. Length (mm) C-Type Ground Clamps GC-600-50 GC-600-DBP GC-600-TMP Model No. AMP Capacity Type Cable Connection Throat Opening Throat Depth GC-600-50 910-1150 500 1/" cap screw -1/" 1-3/8" GC-600-DBP 910-101 600 Double ball-point -1/" 1-3/8" GC-600-TMP 910-10 600 Tweco male plug -1/" 1-3/8" 371

Cable Connectors / Terminals / Lugs Welding Accessories 6 Cable Connectors MPC connectors are equiped with heat and oil resistant covers, zinc plated cover and ball-point cable screws. Connectors are interchangeable with older Tweco MBP connectors. The Whip cable connector is used when downsizing cable to an electrode holder. It is a No. male connector with cable hole sized to fit 4,, 1 or 1/0 cable. The -1-MPC will fit any No. or No. 4 female connector. -MPC Description Type Cable Connection Cable Capacity Std. Pkg. MPC Series Positive-CAM Mechanical Connection - Zinc Plated Type Cable & Cover Screws 1-MPC 945-1100 Complete connection Single ball-point 4,, 1 1 ea. male/female 1-MPC-1 945-1110 Male half Single ball-point 4,, 1 ea. male 1-MPC- 945-110 Female half Single ball-point 4,, 1 ea. female -MPC* 945-100 Complete connection Single ball-point 1/0, /0, 3/0 1 ea. male/female -MPC-1* 945-110 Male half Single ball-point 1/0, /0, 3/0 ea. male -MPC-* 945-10 Female half Single ball-point 1/0, /0, 3/0 ea. female 4-MPC* 945-1400 Complete connection Double ball-point 3/0 or 4/0 1 ea. male/female 4-MPC-1* 945-1410 Male half Double ball-point 3/0 or 4/0 ea. male 4-MPC-* 945-140 Female half Double ball-point 3/0 or 4/0 ea. female -1-MPC 945-1140 Whip connection Single ball-point 4,, 1, 1/0 ea. * Sold in clamshell packaging. Cable Connector Replacement Parts Description MPC Series Positive-CAM - Zinc Plated Type Cable & Cover Screws 1R-C 9940-103 Insulating cover only, all 1-MPC 4R-MBP 9940-14 Insulating cover only, all & 4 MPC 1-MBP-10 9940-100 Cable connection screw, zinc plated, all 1-MPC A-53-4 9910-14 Cable connection screw, zinc plated, all -MPC A-14-4 9910-44 Cable connection screw, zinc plated, all 4-MPC Terminals and Twecolugs Screw-on terminals-fits Terminal size 1/" NC Part No: -SF-50 Fits Tweco Connection No. 1-SF-50 9505-1151 No. 1 male half -SF-50 9505-115 No. & No. 4 male half Female Terminals Stud Hole Size 17/3" Part No: 1-AF Part No: 1-OF Description Accepts Male Ends Std. Pkg. 1-AF 9510-1100 45 angle 1-MPC 4 1-OF 9510-1101 180 offset 1-MPC 4 -AF 9510-1110 45 angle 4-MPC, -MPC 4 -OF 9510-1111 180 offset 4-MPC, -MPC 4 Part No: -AF Part No: -OF 37

Terminals / Lugs / Splicers Ball-Point Connection Type Stud hole size 17/3" 10-45C 40-180 10-180C 40-45 Terminals- Heavy Duty Type Mechanical Ball-point 140-HD-180 40-HD-180 Description Cable Capacity Std. Pkg. 10-45 9915-1100 45 Angle* thru 1/0 1 10-45C 9515-1101 45 Angle** thru 1/0 1 10-180 9515-110 180 Offset* thru 1/0 1 10-180C 9515-1103 180 Offset** thru 1/0 1 40-45 9515-1110 45 Angle* thru 4/0 1 40-45C 9515-1111 45 Angle** thru 4/0 1 40-180 9515-111 180 Offset* thru 4/0 1 40-180C 9515-1113 180 Offset** thru 4/0 1 * Less insulated cover ** Insulated cover Description Cable Capacity Size of Stud Hole Length (inches) 140-HD-180 9515-110 180 offset 3/0 & 4/0 1/3" 4-3/8" 111 140-HD-180C 9515-111 w/ insulated cover 180 offset 3/0 & 4/0 1/3" 5-1/" 140 40-HD-180 9515-11 180 offset 3/0 & 4/0 1/3" 4-5/8" 131 Length (mm) Welding Accessories 6 140HD-180C Twecolugs - Crimp or Solder Type For use of Tweco Lug-Set T-6 T-810 Welding Cable Size AMP Rating Size of Stud Hole I.D. Solder Socket T-6 950-1104 6 thru 150 17/3".461" 5 T-10 950-1105 1 thru /0 5 17/3".559" 5 T-3040 950-1107 3/0 & 4/0 50 17/3".660" 5 T-40HD 950-1109 4/0 heavy-duty 35 1/3".776" 5 Power Cable Lugs T-810 950-1101 8 thru 10 50 13/64".38" 10 T-68 950-110 6 thru 8 70 1/64".89" 10 T-46 950-1103 4 thru 6 90 1/64".347" 10 Std. Pkg. Cable Splicers Ball point type Fitting Type Cable Capacity Std. Pkg. BP-410 9605-1101 Ball point 4,, 1, 1/0 1 BP-1030 9605-1103 Ball point 1/0, /0, 3/0 1 BP-040 9605-1105 Double ball point /0, 3/0, 4/0 1 BP-410 BP-1030 BP-040 373

Panel Receptacles / Block & Punch Welding Accessories Panel Receptacles Use with MPC or MBP connectors TSF Version BPF Version Fitting Type Fits Tweco Connector For Cable Size Cable Attachment 1516-BPF 9580-1100 Ball-point No. 1 4,, 1 5/16" ball point 114-TSF 9580-1101 Threaded No. 1 4,,1,1/0 5/16" thread, stud 38-TSF 9580-110 Threaded No., 4 1/0, /0, 3/0 3/8" thread, stud 916-BPF 9580-1103 Ball-point No., 4 1/0, /0, 3/0 9/16" ball point 1-TSF 9580-1104 Threaded No., 4 1/0, /0, 3/0 1/" - 0 thread, stud Replacement Parts Description A-53-4 9910-14 9/16" ball point screw, use with 1516-BPF AL-300-1 9910-71 7/16" ball point screw, use with 916-BPF 6 Tweco Lug-set Block & Punch For use with Twecolugs Description 1-BP 9900-1140 Block & punch Replacement Machine Plugs-Ball Point Connection 1-M-T -M-T Taper Length Taper Dimension Cable Capacity 1-M-T 9505-1800 1-1/8" 1/64" to 3/64" 4,, 1 -M-T 9505-1801 1-1/8" 1/64" to 3/64" 1/0, /0, 3/0 Receptacle Conversion Adapters Fits Cam Locking Machine Receptacle Fits Tweco Male Plug Ends -CLC 9505-1811 Large-11/16" I.D. No. -M, 4-M, -MPC, 4-MPC 374

, Ullman, ULM Cable Cutter / Lighted Inspection Mirrors / Inspection Mirrors Jacket Stripping Cable Cutting Hand Tool Description T-908 9900-1190 Tweco cable cutting hand tool 3-3/8" LED Light Inspection Mirror Three LED lights illuminates dark areas for perfect inspection. All-angle ball joint holds the lighted mirror head firmly at any angle for perfect viewing. Stainless steel handle telescopes from 6-3/4" to 30-1/4" for fast accurate inspection, and the cushion handle will not slip in wet or oily hands. HTS-LT -3/8" LED Light Inspection Mirror LED Light illuminates dark areas for perfect inspection. Telescopes from 6-1/ - 36-3/8. All-angle ball joint holds lighted mirror head firmly at any angle for perfect viewing. Stainless steel handle is long, strong, and lightweight for fast accurate inspection. Comes with two round lithium batteries. Heavy Duty handle will not slip in wet or oily hands. HTC-LT 1-3/8" LED Light Inspection Mirror 1-3/8" LED case illuminates dark areas for viewing in tight areas. Telescopes from 6-3/4" - 35-1/". HTE-LT HTS-LT HTC-LT HTE-LT HTCLT-HD Replacement Mirror Head Hand Tools 9 Rectangular LED Light Inspection Mirror Rectangular Inspection Mirror (-1/4 x 3-1/ ) with three Rotating LED Lights Telescopes from 6-3/4-30-1/4. Lighted head with three LED Lights that can be adjusted to needed angle for inspection in tight dark areas. All-angle ball joint holds the lighted mirror head firmly for perfect viewing. Stainless steel handle is long, strong, and lightweight for fast accurate inspection. Cushion handle will not slip in wet or oily hands. HTK-LT Inspection Mirrors For All Angle Viewing Original All-Angle Ball Joint Mirrors with brushed finish stainless steel mirror backs. Fast, accurate visual inspection of hidden areas with an almost limitless number of positions. Double ball joint links swivel mirrors for viewing to 360. Ullman s precision engineered links are manufactured from tempered spring steel to withstand the stresses of constant repositioning, move freely, hold desired position. Replaceable clear glass mirrors for perfect reflection. Telescoping and pocket models. Non-rotating inner hex rods on telescopic models prevent mirrors from swinging out of alignment when in use. Insulating vinyl grip on all models. K- Series Rectangular Telescoping Mirror -1/8" x 3-1/" Overall length 11-1/4", extends to 15-1/4" OK- Extra Long Handle Overall length 17-1/4", extends to 7-1/" K-L Magnifying Overall length 11-1/4", extends to 15-1/4" K-M Magnifying, Extra Long handle Overall length 17-1/4", extends to 7-1/" K-ML HTK-LT A- Series Circular Pocket Mirror 7/8" diameter Overall length 7-1/" OA- Magnifying Overall length 7-1/" A-M 519