SA200 inside the GASVECTOR system
Main specifications Designed to be installed either inside GASVECTOR modules or in service rooms, it can work in conjunction with an electric motor up to maximum 55 kw power with flow rates exceeding 900 Sm3/h. The intrinsic flexibility of the engineering of the SA200 makes it ideal for applications such as roadside filling stations, stations for fleets of public transport vehicles, or processing plants including those with gas produced by biomass. Extremely compact and versatile, it adapts to any suction pressure. Easy to maintain, with the guarantee of low oil consumption, low starting current and low compression costs. Each unit only leaves the factory after being tested under normal operating conditions. High performance Lowest compression costs on the market Low starting current No vibration NON lubricated cylinders Low oil consumption Fully automatic operation Discharge pressure up to 350 bar Minimum maintenance costs Designed for a wide range of suction pressures Perfectly balanced Low noise levels Interchangeable piston-sleeve module Suitable for any type of application: CNG, Biogas and Process gas Engineered for non stop operation, 365 days a year Automatic system to shut off the gas input/output Standard version Inbuilt remote control of the system Alarm management via SMS/e-mail 12 colour touch screen Computerised dispensing control system 1 µm (micron) filtration on input Automatic system to shut off the gas input/output Electro pneumatic priority panel Interstage pressure transmitters Start up with valve lifter and blow down Tropicalised gas-water-air cooling Efficiency sensor for the crank mechanism oil filter Options Available Coalescent type filter Oil Free API 618 compliant Explosion Proof electric control panel Start up with blow down Start up with inverter and computerised control of consumption Computerised flow rate control system Soft-Start Operation with endothermic motor Tropicalised gas-air cooling Pipes protected against high temperatures Interstage temperature transmitters Vibration transmitters Booster configuration available for draining of cylinder skids
Start up with valve lifter or blow down available Lowest oil consumption on the market 2 or 3 cylinder configuration The lowest amount of oil in compressed gas Priority panel on board the skid Wide range of piston-sleeve modules available New adjustment system for the direct motor-compressor coupling Innovative pistons and seals compared to industry standards Electric control panel with large 12 colour touch screen display Inbuilt remote control of the system Alarm management via SMS/e-mail Compact safety panel and vent recovery New generation self-supporting frame
SA200 flow rate diagram 300 275 250 225 55 kw 45 kw Capacity [Sm3/h] 200 175 150 125 37 kw 33 kw 100 75 50 22 kw 25 0 0 1 2 3 4 5 Suction Pressure [barg] Diagrams provide an indication of the performance range. Performance refers to a input gas temperature of 15 C and discharge pressure at 250 barg. Please contact the technical service department at Fornovo Gas to control the selected configuration or to check if products with other pressures/flow rates not shown in the charts are in stock. www.fornovogas.it SA200 flow rate diagram Capacity [Sm3/h] SA200 Diagramma di portata 1000 950 55 kw 900 850 800 750 45 kw 700 650 600 37 kw 550 500 450 30 kw 400 350 300 250 22 kw 200 150 100 50 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 Suction Pressure [barg] Fornovo Gas S.r.l. Registered Office Via P.M. Curie, 14 42122 - Reggio Emilia - Italy Head Office Via Carbognani, 5 43029 - Traversetolo (PR) - Italy Tel. +39.0521.842506 Fax +39.0522.550112 info@fornovogas.it Fornovo Gas Srl may modify the specifications and/or performance of its products at any time. SA200 - V.04/2010 ENG