Sliding stacking timber partitions Aperto 60/H HAWA Stacking area: Elegantly engineered curves Floor guide: No level differences Stacking at 90º to the side axis Stacking parallel to the side axis Top hung system for light weight timber partitions up to 9 panels with an overall opening width up to 8,00 mm Minimal stacking area space Impractical designs such as partitions from a counter top to ceiling are possible Ideal for most residential and commercial partitions For panel thickness: 3 0 mm Panel width: 0 90 mm, panel height: 2,600 mm Max. panel weight: 60 kg Vertical adjustment +/- 3 mm AH.220
Sliding stacking timber partitions Variotec 10/H HAWA For large timber partition panels High performance track curves gives complete freedom design Huge range of panel layout configurations Great felexibility in parking area designs Enabling the use of all available opening spaceto be maximised Parallel and perpendicular stacking arrangements are possible Min. panel thickness: 40 mm (with integral brush seals 0 mm) Panel width: 1,000 mm Max. panel weight: 10 kg Vertical adjustement +6/-3 AH.221
Sliding stacking glass partitions Aperto 60/GL HAWA Top hung system for lighter weight fully glazed full height room partitions Allows a completely flush partition Minimal stacking area space Stacking at 90º to the side axis Stacking parallel to the side axis Impractical designs, such as partitions from a counter top to ceiling For most residential and commercial floor to ceiling partitions Min. glass thickness: 8 and 10 mm (toughened safety glass) Max. panel weight: 60 kg, max. panel height: 2,600 mm Vertical adjustement + /-3 Min. panel width: 00 mm Max. panel width for: Stacking 90º, sliding or pivot door 90 mm Stacking parallel, sliding door 1,100 mm Stacking parallel, pivot door 1,200 mm AH.222
Sliding stacking glass partitions Variotec 10/GV HAWA For large glazed partition panels Providing of complete solutions for room devision and separation Complete freedom of design Huge range of panel layout configurations Great flexibility in parking area design State of the art two point suspension trolley hangers allow glazed panels to be moved extremely quietly and smoothly along tracks Glass thickness: 10 and 12 mm Max. panel width: 1,000 mm Max. panel height: 3,00 mm Max. panel weight: 10 kg Vertical adjustement +6/-3 Horiz. glass suspension, retainer profiles: Aluminium anodized AH.223
Sliding stacking frameless glass partitions Cornertec 10/GV HAWA Small corner suspension points replace the need for full width suspension profiles For large frameless glass partitions incorporating corner suspension patch fittings Visualy appealing system for aesthetically desirable benefits of frameless glass Easy integration of cover plates in existing applications and into new build projects Exceptionally smooth and quiet cornering and general operation of top track and channel curves Glass thickness: 10 and 12 mm Max. panel height: 3,00 mm Max. panel weights: 100 and 10 kg respectively Vertical adjustement +6/-3 AH.224
Sliding stacking tall glass panels Variotec 10/GR Frame profile HAWA Changes of 16º to 90º up to 1º Changes of direction Frame profile for all-glass sliding walls Enhance rigidity for tall glass structures Slimline design meets highest aesthetic requirements For thoughened safety or laminated glass panels Installation with curved tracks are possible Changes in direction between 16º and 90º Max. glass thickness: Toughened safety glass 10, 12 and 12.7 mm Laminated safety glass up to 13 mm Max. panel height: 3,00 mm Max. panel weight: 10 kg AH.22
Sliding folding frameless glass partition Variofold 80/GV HAWA Examples of panel sets Set for 2-leaf unit Set for 4-leaf unit Set for 6-leaf unit Top track can not be curved. First door is pivoted and end capped. 2 door suits may be installed without bottom channel. For 2-, 4- and 6-leaf top hung folding frameless glass doors Single pivot doors permitted For glass thickness: Toughened safety glass: 10,12 or 12.7 mm, Laminated safety glass: 10.6 11.8 mm Min. door width: 400 mm Max. door width: 900 mm Max. door height: 2,600 mm Max. door weight per leaf: 80 kg Top track: Aluminium silver anodized Bottom channel: Aluminium or brass AH.226
Sliding folding frameless glass partition Centrefold 80/GV HAWA Examples of panel sets Set for 2 ½ -leaf unit Set for 3 ½ -leaf unit Top track can not be curved. Door suits up to 2½ panels may operated without bottom channel. Technical details and options as for Variofold 80/G system. To suit centre fold configuration for up to ½ glass panels Single pivot doors from opposite jamb as no access doors permitted For glass thickness: Toughened safety glass: 10,12 or 12.7 mm, Laminated safety glass: 10.6 11.8 mm Min. door width: 400 mm Min. door width: 900 mm Max. door height: 2,600 mm Max. door weight per leaf: 80 kg Top track: Aluminium silver anodized Bottom channel: Aluminium or brass AH.227