CEMA C CEMA D Continental HC TM Series
20 TROUGHING IDLER 5 DIA. 69AHC501-BW 6 DIA. 69AHC601-BW 35 TROUGHING IDLER 5 DIA. 69AHC530-BW 6 DIA. 69AHC630-BW 45 TROUGHING IDLER 5 DIA. 69AHC542-BW 6 DIA. 69AHC642-BW 20 S/A TROUGHING IDLER 5 DIA. 69AHC503-BW 6 DIA. 69AHC603-BW Bolts, nuts and washers for mounting are not included. HC TM troughing idlers exceed CEMA D specifications through 36 BW.
35 S/A TROUGHING IDLER 5 DIA. 69AHC532-BW 6 DIA. 69AHC632-BW 45 S/A TROUGHING IDLER 5 DIA. 69AHC544-BW 6 DIA. 69AHC644-BW 20 IMPACT TROUGHING IDLER 5 DIA. 78AH502-BW 6 1/4 DIA. 78AH602-BW 35 IMPACT TROUGHING IDLER 5 DIA. 78AH536-BW 6 1/4 DIA. 78AH636-BW Four inch diameter also available. Catalog subject to change without notice. Use certified prints for construction purposes.
45 IMPACT TROUGHING IDLER 5 DIA. 78AH548-BW 6 1/4 DIA. 78AH648-BW FLAT BELT ROLL 5 DIA. 69AHC510- E 6 DIA. 69AHC610- E Rise Bracket Part Number 72A4622, 4 lb / pair RETURN ROLL 5 DIA. 69AHC510- E 6 DIA. 69AHC610- E Drop Bracket Part Number 69H5834, 4 lb / pair SELF ALIGNING RETURN IDLER 5 DIA. 69AHC519-BW 6 DIA. 69AHC619-BW Weights shown in pounds and lengths shown in inches.
Advanced, High Tech, Fully Automated, Manufacturing Breakthrough Makes Tapered Roller Bearing, Idler Roll Technology Affordable for Every Application. The HC Series roll from Continental Conveyor is produced using proprietary manufacturing techniques. State-of-the-art assembly methods allow Continental to adjust the bearing endplay setting to precise engineered specifications. These proprietary methods provide absolute consistency roll-to-roll. In addition, the 3/4 tapered roller bearing provides twice the L10 life of ball bearings. The advanced five-stage seal design ensures long-life operation without relubrication. Now you can move up to the durability of tapered roller bearing, idler roll technology without sacrificing your budget. HC idlers are available from stock at authorized Continental distributors and factory warehouses. With the new HC you will never have to settle for CEMA C ball bearing rolls again. MODIFIED GEOMETRY TAPERED ROLLER BEARING Automotive class line contact tapered roller bearings provide more bearing contact area than ball bearings, spreading the load over a larger area. This relieves stress and enhances bearing life under heavy loads and impact. FIVE-STAGE SEAL DESIGN 1. An exterior shield provides an initial barrier to divert contaminants away from the bearing cavity. 2. A flinger employs the natural centrifugal forces of a rotating idler roll to redirect potential contaminates away from the bearing cavity. 3. A grease-filled horizontal labyrinth seal retards lateral movement of contaminates. 4. A contact lip seal provides additional sealing protection and keeps lubricant in the bearing cavity. 5. A rear seal provides added protection for the grease reservoir.
There s A Idler Roll for Every Application CONTINENTAL Super B Series Specifically designed for use in CEMA B rated applications. Permanently lubricated in belt widths ranging from 18 to 48. CEMA B CONTINENTAL HC Series The CEMA C and D rated idler roll allows you to move up to tapered roller bearing technology, even on a tight budget. Permanently lubricated and available in belt widths ranging from 18 to 60. CEMA C&D CONTINENTAL H-Plus Series The CEMA D rated idler roll featuring end-pointed shaft technology (where appropriate) provides optimum performance, even under the toughest of conditions. Available permanently lubricated or in regreasable configurations, in belt widths ranging from 18 to 72. CONTINENTAL SDX-Plus Series The CEMA E rated idler roll provides super-duty performance under all conditions. Available permanently lubricated or in regreasable configurations, in belt widths ranging from 36 to 120. CONTINENTAL Structure and Accessories Specialized support structure for virtually every application is available by-the-foot or by-the-mile. Plus, Continental provides a complete selection of system accessories such as pulleys, pillow blocks, take-ups, drives, impact/slider beds, reinforced impact idlers, polyethylene idlers and scale idlers to complement the performance of Continental idler rolls. CEMA D CEMA E Continental products pictured, described, or listed in this publication are illustrative only. Application and use of these products must be in accordance with applicable codes and regulations and must be arranged and/or provided with covers or other guards where necessary to assure safety of personnel. HC, H-Plus, SDX-Plus, are trademarks of Continental Conveyor & Equipment Company. Continental is a registered trademark of Continental Conveyor & Equipment Company End-Pointed Shaft Technology is a proprietary technology of Continental Conveyor & Equipment Company. Continental Conveyor & Equipment Company Printed in U.S.A. HC Idler Rolls 3/03