Table of Contents. Laser Marker, Welder, Cutter Page Laser Marker 4 Laser Welder 6 Laser Cutter 7

Table of Contents Laser Marker, Welder, Cutter Page Laser Marker 4 Laser Welder 6 Laser Cutter 7 Sinker EDM Page CNC EDM 8 Conventional/ ZNC EDM 9 Small Hole EDM 12 Chiller 15 Tubing/ Ceramic Guide 16 Sodick Ceramic Guide/Collet 17 Mitsubishi Wire EDM Parts 18 Sodick Wire EDM Parts 23 Fanuc Wire EDM Parts 25 Brother wire EDM Parts 28 Hitachi/ Charmills Wire EDM Parts 29 Japax Wire EDM Parts 31 Stainless tool/ Vises/ 3R Tooling 34 Brass Wire/ Zinc Coated Wire 36 EDM Tool/ Fixture 38 Magnetic Chuck/ Holder 40 EDM Fluid 41 EROWA Tooling 42 System 3R 43 Grinder, Accessories, and Tooling Page Surface Grinder 44 Magnetic Separator 45 Monaset Tool & Cutter Grinder 46 JMC400 Cylindrical Grinder 47 G40 Universal Cutter & Tool Grinder 48 Diamond / CBN / Grinding Wheel 49 Fixture, V-Block Vise, Magnetic Holder 53 Magnetic Chuck/ Chuck Controller 54 Chamfering Machine 56 Tooling: Fixture, indexer, Sine Plate 57 Pin Cur off Machine, TORIT Dust collector 61 Lathe, Accessories, and Tooling Page Tool Room Lathe 62 Engine Lathe, Atlas Chuck 63 BTC Chuck, Power Chuck 67 ALORIS Tooling System 69 Machine Shop Supply Page Bandsaw 70 Cutter Grinder 71 Drill Grinder, Drill Sharpener 72 Tool Cutter Grinder 73 DRO 74 Hoist and Lifting Ring 75 Mag. Base, lubricant Pump, Tool 77 Trolley Measuring Instrument and Tool 79 Cyanoacrylate Adhesive 80 Milling Machine, Accessories, Page and Tooling Powerful Hydraulic Radial Drilling 81 Machine Drilling Machine Milling Machine 82 tapping Machine 83 Bed Type Mill/ Knee Type Mill 84 Milling Head Cartridge Spindle 85 Machine Shop Supply 86 Vises, Rotary Tables 87 Carbide Endmill 90

Table of Contents Fix Holder Page Fix Holders : DIN69880 Turning Holder - Square Tool 91 Turning Holder / B1~B8 92 Axial Tool Holder 93 Boring Bar Holder / Internal Coolant 93 Flow Collet Chuck -Straight ER Type/ TG 94 Type/ Morse Taper... VDI Keyless Drill Chuck 95 T1 Type Boring Bar Holder 95 PM Collet Chuck/ 96 PM Offset Boring Bar Holder Bushing Type Z/ Bar Puller 97 Driven Holder DIN5480 Axial/ Radial Driven Holders 98 DIN5482 Axial/ Radial Driven Holders 102 DIN1809 Axial/ Radial Driven Holders 106 Spur Coupling IT Axial/ Radial Driven Holders 109 Spur Coupling MT Axial/ Radial Driven Holders 112 HAAS Axial/ Radial Driven Holders 116 Mazak Live Tooling 117 Turning Tool Holder/ Collet Chuck 121 Holder for SQT CNC Lathe 122 OKUMA Tool Holder 126 Driven Holders Boring Bar Holder MURATEC Axial/ Raidal Driven Holders, Boring Bar 136 Holder NAKAMURA TOME Axial/ Raidal Driven Holders 139 Boring Bar Holder TAKAMAZ Axial/ Raidal Driven Holders 146 Boring Bar Holder STAR Axial/ Raidal Driven Holders 148 Boring Bar Holder Page CITIZEN Axial/ Raidal Driven Holders 150 Boring Bar Holder MORI SEIKI Axial/ Raidal Driven Holders 152 MIYANO Axial/ Raidal Driven Holders 159 WASINO Axial/ Raidal Driven Holders, Turning Holder 165 BMT Series DAEWOO/ KOREA Series Axial/ Raidal Driven Holders 168 Block/ Boring Bar Holder Okuma Style/ HAAS Style 175 MORI SEIKI Style ROMI Style Okuma HOWA Style, Mazak Style CNC Tooling System Angle Head 178 HSK Holders for Turning Mills Boring System Deep Hole Boring Holder 179 Boring Holder/ CAT, BT Collet SD Collet/ TG Collet/ ER Collet 181 Collet Chuck ER Collet Chuck/ BT, CAT, HSK, SK 182 Others: End Mill Holder/ BT, CAT, HSK, SK 183 WER Tapping Attachment/ BT, CAT, SK Morse Taper Holder/ BT, CAT, SK, HSK, NT, DIN2080 Shell Mill Holder/ BT, CAT, HSK Retension Stud Face Mills/ Shell End Mills Machine Shop Supply. Drill Chuck CNC Keyless Chuck/ Drill Chuck Ball Bearing Drill Chuck, Locking Fixture, others. To Order: - Toll Free Order Number: 1800-343-3508 - Fax: 949-833-1199 - Online Order: www.gromaxonline.com - e-mail: sales@gromax-usa.com

Laser Machine GROMAX - HAN S LASER MARKER SERIES Laser engraving/marking is the process of using lasers to engrave or etch an object. The technique does not involve the use of inks, or tool bits which contact the engraving surfaces and cause mechanical extrusion or stress. FIBER SERIES Extremely versatile compact maintenance free fi ber laser markers. For more detailed information, please visit our website at www.gromaxonline.com Fiber Series YLP-F20 (advanced) Mars20J YLP-MP20 YLP-HA20 UV Series UV-3C CO2 Series CO2-D180 CO2-D30 YLP-HA20 Fiber Laser Marker 20W (Base ) Applications: YLP-HA series laser marker is widely used on Electronic components, Glasses, watches/ clocks, Plastic tool, Medical devices, IC cards, Kitchen and bathroom fi xtures, etc. Average Power YLP-HA20 < 20W Fiber Laser Generator Wavelength 1064 nm Repetition Rate 20~200 khz Marking area Standard: 100mmx100mm (standard lens) Min. Font size 0.3mm Cooling method Air cooled Power requirement 110-220V/ Single Phase / 60Hz Power Consumption 0.5 kw Dimensions (LxWxH) 620mmx1070mmx1410 mm Weight 155 kg Call YLP-MP20 Fiber Laser Marker Applications Ideal for metal marking, highly photo sensitive materials, such as anodized aluminum. Widely used in Electronic components, Glasses, Watches, Clocks, Plastic tools, Medical devices, IC cards, Kitchen and bathroom fixtures etc. YLP-MP20 Shown YLP-MP20 Average Power 20W MOPA laser generator Wavelength 1064nm Repetition Rate 1.6-1000 khz Marking area Standard: 100mm x100mm (standard lens) Max. size: 400mm x 400mm with special lens Beam Quality M2 <1.3 Marking depth 0.4mm Marking speed 7000mm/s Minimum marking line 10μm Min. Character size 0.1mm Repeatability ±0.003mm Cooling Method Air cooled Operating temperature 15 0 C - 35 0 C Power requirement 110-220V/Single Phase /60Hz/2.5A Power Consumption 0.5 kw Dimension 800mmx840mmx1410mm Weight 260 kg Marking Font support TTF, SHX, user defined fonts Compatible marking file BMP,JPG, PNG, TIF, PCX, TAG, IOO, PNG, GIF, PLT Call page 4

Laser Machine HL.YLP-F20 / HL. Mars 20J Fiber Laser Marker 20W Applications: YLP-F series laser marker is widely used in Electronic components, Glasses, Watches, Clocks, Plastic tools, Medical devices, IC cards, Kitchen and bathroom fi xtures, etc. YLP-F20 MARS-20J Average Power 20 W YLP-F20 Shown without Protective Cover Beam quality M2 <1.3 Marking area Standard: 100mm x100mm (standard lens) Max. size: 400mm x 400mm w/ special lens Working distance 197±2mm Min. Character size 0.5mm Repetition Rate 20~200 khz Cooling method Air cooled Power consumption 0.5 kw Power requirement 110-220V 60 Hz Dimensions (LxWxH) 920x740x1415mm 545x186x430mm 552x125x142mm weight 260 kg 36 kg Call Call MARS-20J Shown CO2 SERIES Applications Tiny laser spot, fi ne marking line width High laser frequency, fast marking speed Compact design CO2-D180 CO2-D30 Average Power 180W 30W Wavelength 10.6μm Marking Depth 8mm 3mm Marking Speed 7000mm/s Min. Line Width 0.15mm 0.12mm Min. Character Size 0.8mm 0.6mm Marking Area 600mm 600 mm 120mmx120mm Power requirement 220V/Single Phase/60Hz/20A 220V/Single Phase/60Hz/6A Call Call UV SERIES UV Laser Marker UV-3C-S shown Applications Good for non-metalic, such as PVC, ABS, plastic etc. Good for most materials, produces delicate high quality characters. Used for IC cards, IT components, crafts, communication devices, electrical components etc. Average Power Wavelength Repetition Rate Marking Area Marking Speed Min. Line Width Min. Character Size Repeatability Cooling Power requirement Power Consumption Dimension UV-3C 3W 355 nm 5-120 khz 100mm 100mm(standard) 7000mm/s 0.01mm 0.3mm ±0.003mm Air Cooled 220V/ 60Hz 2 kw 800mmx1030mmx1650mm Call (UV-3C-S) UV-3C-D (with Turning Table) page 5

Laser Machine GROMAX - HAN S LASER WELDER SERIES Fiber Laser Welder Applications Various metals such as titanium, nickel, zinc, copper, aluminum, chrome, niobium, gold and silver and other alloys. Precision parts such as cell phone outer shells, laptop outer shells, fiber connectors, electronic components, military industry, and medical instruments. High Electrical Efficiency Ultra-low amplitude noise, high stability and ultra-long pump diode lifetime Ideal Beam Quality, small heat affected zone, less deformation Maintenance free Single-mode Fiber Laser Delivery FP150 WFF500 Average power 150 W 500 W Pulse width 0.2~50 ms Laser frequency 200(max) Hz 200 Hz Wavelength 1070 nm Optical fiber length 5 m FP150 Shown Cooling Air cooled Water cooled Spot Welder Call Call Features Welds can be applied right next to heat sensitive parts like precious gemstones, pearls or springs. Strong and invisible high-quality repairs can be achieved in a very short time. Welds with a spot diameter smaller than 0.15mm, standard is 0.2~2mm. Minimum heat in weld area. W60 No tool wear, contact-free processing. Average power 50W Laser wavelength 1064nm W60 Shown WT. 225kg Applications Good for most metals such as stainless steel, titanium, Ni, Sn, Zn, Cu, Cr, gold, silver, etc. Repair of denture, jewelry, IC s, small electronic components, and guns, etc. Power requirement AC 220V±10%/60Hz Outer dimensions 905x610x1130 mm 448x226x650 mm Max. Pulse energy Pulse frequency Peak power Power requirement Cooling method Waveform quantity Positioning method Dimension 30J/6ms(Opt. 60J/12ms) 0Hz~20Hz 6 kw 220V±5%/60Hz/20A Air cooled 50 groups LEICA microscope 10X 1060mm 600mm 1100mm Call Features WF300 YAG laser welder can have 1~4 welding heads independently. MOTIC microscope + liquid-crystal light-valve protector. Real-time current feedback system to ensure the stability of the laser power. Small heat-effected areas, no distortion or porosity. WF300 Shown Applications Good for most metals such as stainless steel, titanium, Ni, Sn, Zn, Cu, Cr, gold, silver, etc. Good for cell phone battery packs, sensors, clocks, watches, jewelry, electronics components, eyeglasses, crafts, precision instruments and medical devices. (Generator Only) WF300 PB300CE Average Power 300W Max. peak power 6kW Max. laser pulse power 30J/10ms Type of laser Nd: YAG Wavelength 1064nm Wave type Num. 50 Pulse width 0.1 ~50ms Pulse frequency 1 ~150Hz Power requirement 380V/60Hz/40A Dimension Main device 1480mm 610mm 1100mm Cooler 810mm 570mm 805mm Total Weight 900 kg Call Call *** Worktable is not included. Available upon request. page 6

Laser Machine GROMAX - HAN S FIBER LASER CUTTER SERIES High performance. Fiber laser generator with service life of up to more than 100,000 hours. High speed, high effi ciency, cutting speed up to 10+ meters/minute. Uses oriented transmission mechanism and servo motor for high precision cutting. No tooling required, you simply program the computer and the laser is able to accurately cut and reproduce the design. Laser beam exerts no mechanical or outside contact on the pieces being cut. Results in less burr, deformation compared to other cutting methods. MPS-XC SERIES (with Enclosed Double Table) dimensions(lxwxh): 9000mmx3000mmx2000mm MPS-XID MPS-XII MPS-XIII Wavelength 1070nm 1070nm 1070nm Average Power 500W 1000W 1500W Power Consumption 11kW 14kW 18kW Woring Area (X x Y) 1500mm 3000mm 1500mm 3000mm 1500mm 3000mm Dimensions(LxWxH) 4300mmx2500mmx1400mm 4300mmx 2500mmx1400mm 4300mmx2500mmx1400mm Max. Moving Speed 650mm/s 650mm/s 650mm/s Max. Cutting Speed 12mm/s 25mm/s 32mm/s Max. Cutting Thickness (Carbon Steel) <6mm <10mm <12mm Z Travel 0-100mm 0-100mm 0-100mm Worktable - XY Stage Positioning accuracy <±0.03mm <±0.03mm <±0.03mm Worktable - XY Stage repositioning accuracy <±0.015mm <±0.015mm <±0.015mm Z Positioning Accuracy <±0.02mm <±0.02mm <±0.02mm Z Repositioning Accuracy <±0.01mm <±0.01mm <±0.01mm Call Call Call MPS-X SERIES page 7

EDM & ACCESSORIES GROMAX CNC EDM Gromax Enterprises Corporation offers you optimum reliability & performance that has been gained through 20-year experience MACHINES CNC P55+E90 CNC P64+E90 CNC P147+E120 CNC P188+E120 CNC301+E120 CNC301+E120-2H TABLE Dimensions 32 X 18 40 x24 67 x37 73 x39 122 x43 Longitudinal & Traversal Travel 19.6 X 15.7 NA NA NA NA Column Travel NA 24 x18 55 x28 71 x31 100 x40 Max. Work Piece WT. 3300 lb 4400 lb 8360 lb 10560 lb 26500 lb WORK TANK (LxWxH) Inside Dimension 46 X 27 X 17 59 x37 x20 87 x52 x24 102 x52 x28 161 x67 x32 WORKHEAD Quill Travel 13.75 16 20 24 23.6 / 39 optional 39 Distance Table Top to Electrode Plate Surface 11 ~26 12 ~28 22 ~41 18 ~41 ~53 Max Electrode Wt (lbs) 500 lb 550 lb 990 lb 1100 lb 1100 lb PACKING DIMENSION (LxWxH) Machine Base 53 x65 x93 68 x71 x103 102 x138 x126 124 x142 x126 236.25 X 181 X 141.5 Net Weight 4200 lb 7920 lb 17600 lb 18700 lb 36,000 lb 40,000 lb DIELECTRIC RESERVOIR 137 Gallons 254 Gallons 540 Gallons 717 Gallons 1730 Gallons GENERATOR Max. Machining 90A 90A 120A 120A 120A/ 180A 120A (x2) Optional Accessories: 1) 3R C Axis EROWA C Axis Hirschmann C Axis $POR 2) 3R ATC EROWA Atc Hirschmann ATC $POR page 8 3)4th Axis (refer to www.gromax-usa.com) Yuasa Programmable Rotary Table with UDNC-M1 controller DMNC 170 $POR center ht:5.12 DMNC 220 $POR center ht:6.30 DMNC 280 $POR center ht:7.48 DMNC 5C $POR center ht:4.33 220 Shown 5C Shown For AC & DC Servo

GROMAX ZNC EDM Z-axis programmable EDM See page 4 & 5 for ZNC EDM prices. Fuzzy Logic Control EDM & ACCESSORIES LINEAR GUIDE WAY and BALL SCREWS are used on Gromax column type & all CNC EDM machines (column type) ZNC110+E300 $176,000.00 Machine Base Ball screw standard on all 3-axis X, Y, and Z. For extra smooth movement. Meehanite casting, V-fl at turcite coated ways. DC Servo motor drive. Max workpiece from 1,500 ~ 22,000 lbs. ZNC Power Generator Heavy Duty 50~300 Amp. power supplies Standard 3-Axes Digital Readout System built-in Auto depth control Memory capacities store up to 100 sets of EDM parameters. Each consists of 10 steps. Computer shift from one step to the next automatically to eliminate operator stand-by. Fuzzy Logic System offers the ultimate security by monitoring machining condition to prevent workpiece from arcing. Self adjusting parameters compensate machining condition automatically to bring out the best possible fi nish. Both copper and graphite electrode materials cut fast and accurate Deep hole machining on-screen programming Low electrode wear; maintenance free Other Custom-Made EDM s Available Long X-axis Travel Type Professional EDM Machine Tool Repair/Services Picture shows OLD Cincinnati EDMs retrofitted with brand new Gromax power supply. More than 25 years experience in service and rebuilding of EDM equipment such as ELOX, Cincinnati, Hansvedt, Eltee Pulsitron, Japax, Charmilles, and most Taiwanese imports. As well as many other types of Industrial Machinery & Control Systems. Basic labor charges start at reasonable rate and all work is fully guaranteed. Now, for a limited time only, we are offering 10% off our already low price for the first-time customers. Other services available include: *Design + prototyping of specialized machinery & Sensing devices for custom applications. *Replacement of OBSOLETE EDM power supplies. *Custom + Turnkey Systems. *Service Area: Unites States, Mexico, Central America, and Canada. TWIN-HEAD EDM Twin Z-Axis Type Call us at 1-800-343-3508 or e-mail for a free evaluation and consultation. References available to serious inquirers. page 9

EDM & ACCESSORIES GROMAX ZNC EDM / Conventional EDM (Ram Type) Ball screws are standard features from model P26+E75 and up! Reliability Begins with Quality All Gromax machine frames are made of MEEHANITE casting for maximum rigidity & accuracy X-Y slideways are hardened and ground. V-Flat design and faced with " TURCITE-B" for smooth sliding and wear resistance Table locks for X-Y are of the non-distortion type Fuzzy Logic Control (ram type) P26+E75 $28,500.00 page 10 (ram type) ZNC46+E100 $42,000.00 MACHINES ZNC26/P26 ZNC46/P46 ZNC56/P56 TABLE Dimensions 23.62 x 11.81 27.56 x 15.75 37.40 x19.69 Longitudinal & Traversal Travel 12.50 x 11.00 19.75 x 16 23.62 x19.69 Max. Work Piece (LxWxH) 30 x 19 x 13 44 x 24 x 15 57 x 35 x 23 Max. Work Piece WT. 1496 Lbs 3300 Lbs 8800 Lbs WORK TANK (LxWxH) Inside Dimension 31 x 20 x 14 45 x 25 x 16 58 x 36 x 24 WORKHEAD Backslide Travel 9.5 15.5 15.75 Quill Travel 6.0 7.25 9.84 /13.78 * Max. Distance Table Top to Electrode 22.54 27.65 37.50 Plate Surface Max Electrode Wt (lbs) 110 440 550 PACKING DIMENSION (LxWxH) 57 x58 x87 58 X 57 X 87 81 x70 x110 Net Weight 2424 Lbs 3520 Lbs 6900 Lbs DIELECTRIC RESERVOIR Outside Dimension (LxWxH) N/A 36.22 x 31.49 x 27 47 x71 x24 53 Gal 79 Gal 262 Gal Cartridge Filter 2 2 4 Net Weight N/A 200 Lbs 660 Lbs Packing Dimension (LxWxH) N/A 44.09 x39.37 x35.43 55 x79 x32 GENERATOR E75 E100 E150 Maximum Machining 75A 100A 100A Current Power Input 9KVA 10KVA 10KVA Practical Material 0.5In 3 /H 0.5In 3 /H 0.5In 3 /H Removal Rate W/O Wear Maximum Material Removal Rate 2.1In 3 /H 2.9In 3 /H 2.9In 3 /H Max. Electrode Wear 0.5% 0.5% 0.5% Best Surface Finishing U/Rmax 0.3 0.3 0.3 Generator Net Weight 500 Lbs 550 Lbs 550 Lbs Packing Dimension (LxWxH) 35x29x79 Conventional EDM P26+E75 P46+E100 P56+E100 $28,500.00 $31,900.00 NA ZNC ZNC26+E75 ZNC46+E100 ZNC56+E150 $34,600.00 $42,000.00 $63,500.00 All Gromax Conventional EDM machines are equipped with 3 axis DRO.

EDM & ACCESSORIES GROMAX ZNC EDM / Conventional EDM (Column Type) Ball screws are standard features from model P26+E75 and up! Fuzzy Logic Control Fuzzy Logic Control (column type) ZNC60+E100 $98,500.00 (column type) ZNC110+E300 $176,000.00 MACHINES ZNC60/P60 ZNC70/P70 (ZNC62/P62) ZNC80/P80 (ZNC66/P66) ZNC110/P110 (ZNC76/P76) ZNC130/P130 (ZNC86/P86) TABLE Dimensions 39.37 x23.62 47.24 x31.50 55.11 x35.5 78.74 x39.37 98.43 x39.37 Longitudinal & Traversal Travel 23.62 x19.69 39.37 x23.62 43.30 x27.56 82.67 x39.37 98.43 x39.37 Max. Work Piece (LxWxH) 57 x 34 x 25 70 x 42 x 24 82 x 45 x 27 109 x 58 x 27 133 x 60 x27 Max. Work Piece WT. 8800 Lbs 11000 Lbs 13000Lbs 22000Lbs 25000 Lbs WORK TANK (LxWxH) Inside Dimension 58 x 35 x 26 71 x 43 x 25 83 x 46 x 28 110 x 59 x 28 134 x 61 x 28 WORKHEAD Quill Travel 15.75 15.75 / 23.62 * 17.7 /23.62 * 23.62 23.62 Max. Distance Table Top to Electrode 32.67 /38.58 */48.42 * 28.75 /34.64 */ 37.8 /43.7 */49.6 * 53.14 59.06 Plate Surface 44.49 * Max Electrode Wt (lbs) 660 660 1100 1100 1100 PACKING DIMENSION (LxWxH) Machine Base 81 x70 x110 103 x92 x79 125 x98 x95 150 x90 x80 170 x 89 x 107 Head & Shoulder - 90 x40 x76 108 x46 x96 120 x36 x91 134 x41 x100 Work tank - - - 144 x72 x33 161 x85 x79 Net Weight 7700 Lbs 13200 Lbs 16500 Lbs 23980 Lbs 27500 Lbs DIELECTRIC RESERVOIR Outside Dimension Tank 1 56.5 x54.2 x34.13 98 x74 x52 115 x50 x74 121 x61 x81 113 x65 x72 Tank 2 56.5 x54.2 x34.13 101 x 76 x 44 115 x50 x74 121 x61 x81 135 x 71 x 77 413 Gal 490 Gal 529 Gal 792 Gal 910 Gal Cartridge Filter 4 4 4 4+4 4+4 Net Weight 660 Lbs 990 Lbs + 770 Lbs 1100 Lbs +1100 Lbs 1760 Lbs+1760 Lbs 2200 Lbs + 1980 Lbs Packing Dimension (LxWxH) 64.5 x62.2 x42.13 100 x76 x43 (x2pcs) 123 x57 x82 (x2pcs) 129 x69 x89 (x2pcs) 142 x 78 x 85 (x2pcs) GENERATOR E100 E150 E150 E300 E300 Maximum Machining 100A 150A 150A 300A 300A Current Power Input 10KVA 15 KVA 15 KVA 30KVA 30KVA Practical Material Removal Rate 0.5In 3 /H 0.5In 3 /H 0.5In 3 /H 0.5In 3 /H 0.5In 3 /H W/O Wear Maximum Material Removal Rate 2.9In 3 /H 5.12In 3 /H 5.12In 3 /H 7.68In 3 /H 7.68In 3 /H Max. Electrode Wear 0.5% 0.5% 0.5% 0.7% 0.7% Best Surface Finishing U/Rmax 0.3 0.3~0.5 0.3~0.5 0.3~0.5 0.3~0.5 Generator Net Weight 550 Lbs 650 Lbs 650 Lbs 1450 Lbs 1450 Lbs Packing Dimension (LxWxH) 47 x32 x79 68 x 40 x88 68 x 40 x88 68 x 40 x90 68 x 40 x90 Conventional EDM P60+E100 P70+E150 P80+E150 P110+E300 P130+E300 NA NA NA NA NA ZNC EDM ZNC60+E100 ZNC70+E150 ZNC80+E150 ZNC110+E300 ZNC130+E300 $98,500.00 $106,340.00 $151,000.00 $176,000.00 $198,000.00 page 11

EDM & ACCESSORIES GROMAX Super Drill EDM Please visit www.gromax-usa.com for used EDM and great saving EDM. (SD-32) Maximum stability of workhead feed 60 Amps. maximum machining current Heavy duty stainless work table Auto depth control Super fast speed; low electrode wear One V one flat, Turcite B coated slide ways Micro computer control, MOS-FET special circuit design Maximum distance between table surface and electrode holder: 23.62 SD-32Y shown Fast and accurate deep hole drilling application with capacity from 0.0078" - 0.236 " (0.2 mm - 6.0 mm) in diameter or bigger capacity with 120amp power supply Specifications SD-32Y SD-35Y SD-45Y Drilling 0.006-0.250 0.006-0.250 Work Table Size (L x W) 23.32 x 11.81 23.5 x 11.8 23.6 x 11.8 Maximum Work Piece (L x W x H) 32.67 x 17.71 x 20.47 Maximum Travel (X x Y) 11.81 x 9.84 13.78 x 9.84 17.75 X 13.75 Quill Servo Travel Z 1 13.58 13..58 13..58 Backslide Travel Z 2 9.84 7.8 7.84 Manual Guide Holder Travel 5.91 6.0 6.0 Dielectric 5.26 Gal. x 2 5.3 Gallons x 2 5.3 Gallons x 2 Dielectric Ionized Water Ionized Water Ionized Water Maximum Workpiece Weight 1320 lbs. 880 lb. 1,100 lb Machine Dimensions (L x W x H) 44.09 x 35.43 x 86.61 42.5 x 42.5 x 82.5 55.1 x 55.1 x 86.6 Power Power input 3 KVA Supply Max. Machining Current 50A On Time 12 Steps Off Time 10 Steps Peak Current Setting 16 Steps $25,800.00 $29,900.00 $33,750.00 Test Burn Table (through hole): Depth Workpiece Electrode Tube Machine Time Brass Tubing 1 Steel 1.0mm SD32 33 sec 0.5 Steel 3.0mm SD32 58 sec 0.615 Steel 0.7mm SD20P/ 16P 40 sec 1.335 Aluminum 0.7mm SD20P/ 16P 30 sec 0.317 Steel 0.2mm SD20P/ 16P 90 sec 0.79 Steel 0.4mm SD20P/ 16P 34 sec 1 Steel 1.0mm SD20P/ 16P 35 sec page 12 SD-45Y shown Micro computer Control New Panel Fully Digital Panel 3-Axis DRO & Auto Depth Control EDM Parameters Save & Read Can Be Mounted on Column Control Panel Multiple display functions for Dimension, EDM parameter and machining depth setting Machining stability adjustment: Fine tune and stabilize machining conditions result in fi ner surface finish Inch/metric conversion 0.0002" resolution Auto quill retract Center positioning Machining time timer EDM parameters recall Edge fi nd EDM parameter memory bank stores up to 480 different settings for steel, carbide, and aluminum. Some parameters are preloaded in memory, user can use these parameters as reference for testing, editing, and recording new data accordingly.

GROMAX Micro Drill EDM Save & recall machining data: steel, carbide & aluminum. Ball screws and slide way on X, Y & Z axis, Manual back slide Table type EDM drill for small work pieces. Newest power supply allows for small holes. Drilling capacity:from 0.03mm to 1.5mm (0.0012 ~0.059 ). (0.0012, 0.0019 carbide electrode.) MD20 is good for R&D laboratory. Inch/ Metric conversion, 1/2 function & machining timer, Edge finder, Auto depth control and retrace. 3 axes DRO GROMAX Portable Drill EDM PD-16Y (PD-16Y) Maximum stability of workhead feed 120 Amps. Max. machining current Super fast speed; low electrode wear Can be moved to location for difficult application Micro computer control, MOS-FET special circuit design Distance between table surface and electrode holder: 23.62 Standard Accessories: 3-axes Digital Readout System Auto-Depth Control 50 Amps. Power Current Use distilled water as dielectric 1.0 MM Ceramic Guide (1 pc) 1.0 MM Brass Tubing (10 pcs) Work Lamp (1 pc) Tool Box & Tools (1 set) Coolant Pump & Tank (1 set) Plastic Shield (1 set) MD20 of drilling 0.03mm~1.5mm Table size 8.8 x 8.8 Max. workpiece size 12 x 12 x 6 Table travel (X, Y) 8 x 4 RAM backslide 5.3 Quill servo travel 10.2 Dielectric capacity 7 Gallon + 7Gallon Max. power rating 1.5 KVA Max. Current 15 amp Work load 110 LB Layout (LxWxH) 56 x56 x79 Gross weight 1,500 LB $40,000.00 Machining Time: 15 min. Workpiece: Carbide CD650 76mm (2.99 ) Electrode Dia:.5mm (0.019 ) Copper Tube Hole Dia.: Top.58mm Bottom.56mm (0.023 / 0.022 ) Workpiece: Carbide VD 20 11mm (0.43 ) Electrode Dia:.2mm (0.0079 ) Copper Tube Hole dia.: Top.28mm Bottom.27mm 0.0110 /0.0106 ) Machining Time: 6 min. Machining Time: 10-15 sec. Workpiece: Electrode Dia: Hole dia. MD20 $40,000.00 EDM & ACCESSORIES Stainless steel, 0.3mm (0.012 ).05mm(0.0019 ) Copper Tube.07mm(0.0028 ) PD-16Y (50amp.) $17,500.00 High pressure pump included A: EDC30K B: EDC65K C: EDC15 High Pressure Pump : HPP.CK $2,100.00 High Pressure Rotary Spindle (Drill Chuck Type) : HPRS $1,600.00 0.3~0.5/0.5~1 1~2/ 2~3/ 3~4 4~5/5~6mm High Pressure Rotary Spindle (ER Collet Chuck Type with ER16 collet set of 7) : HPRS.C $1,750.00 Drill EDM Filter : FLT-SD $15.00 High Pressure Pump : HPP.FT $1,600.00 page 13 D: EDC30 E: EDC30U F: EDC60U GROMAX Drill Chuck (optional) A B C D E F Key Type (0.3mm~3.0mm) $160.00 : EDC30K Key Type (0.3mm~6.5mm) $205.00 : EDC65K Keyless Type (0mm~1.5mm) $360.00 : EDC15 Keyless Type (0.3mm~3.0mm) $330.00 : EDC30 $330.00 Keyless Type (0.3mm~3.0mm) : EDC30U *For any Taiwanese Drill EDM Keyless Type (0.3mm~6.0mm) JT1 $360.00 : EDC60U

EDM & ACCESSORIES SDNC16P with Tool Changer Shown SDNC60P $87,000.00 SDNC16P $54000.00 Machine Only $64000.00 w/ auto tool changer $63000.00 w/ 4th axis Machine can be programmed for circular arrays, rectangles and has a fourth axis for drilling metal sections such as robs, tubes and other shapes ; Addition of rotary indexer is necessary for this operation Auto Edge fi nder is standard with this machine Can do drill production quickly CAD/CAM generated programs can be downloaded, by Ethernet work, RS232 or Floppy disk De-ionized water should be used With on line help, it s easy to do programming by G/M code Linear scale, enhances long term operation and excellent accuracy EDM parameters stored and recall by: type of electrode, size of electrode & material of work piece Auto Electrode Change (AEC) is possible to adapt on this machine. (optional) Multiple coordinate display, and full screen display of machining monitor and position Auto program restart function, middle start, Program graphic check function, with graphic and machine bounded Auto electrode wear compensation, do not need to program with electrode wear and guess how much electrode wear is. It automatically measures the electrode wear and compensates into the program Manual Data Input (MDI) function, after tested the program may save the program as a regular fi le Protection function while electrode touch work piece machine will stop There are 6 coordinates in this system, as work piece reference position page 14 Standard Accessories: Paper filter 10μm (1pc) Ceramic guide 0.5mm, 1.0mm (1ea) Electrode tubes 0.5mm, 1.0mm (40ea) Electrode holder 0.3~3.0mm (1pc) Work light (1pc) Tool kit and tool box (1set) Back up program (1 CD-ROM) Optional Accessories: Auto fi ltering system Electrode tubes Guides Keyless chuck 0~1.5mm Keyless chuck 0~3.0mm DRAM memory IC Auto electrode changer 16pcs 4th axis with linear motion 4th axis with rotate function SDNC30P SDNC16P SDNC60P SDNC80P $64,800.00 $54,000.00 $87,000.00 $99,600.00 Table size 20 x16 17.6 x9 28 x20 27.5 x35.4 Servo travel (X,Y) 16 x12 12 x8 24 x16 23.6 x31.5 Servo travel Z 15 14 14 14 Back slide travel C null Manual move by motor drive /Program by servo (optional) Distance between 1.57 ~5.51 3.2 ~9.6 2-12 2-12 guide & table Table load 1100lbs 440 Lbs. 660 Lbs. 660 Lbs Max. work piece size 27.6 x23.6 x5.5 28 x16.4 x9.6 32 x24 x12 32 x24 x12 Net weight 3300 Lbs. 2640 Lbs. 7040 Lbs. 7700 Lbs Lay out (WxDxH) 67 x55 x82 48 x44 x92 84 x64 x92 84 x78 x90 of fluid 7.96Gal 5.3 Gal 13.2 Gal (26.4 Gal optional) Packing size 86 x17 x86 56 x56 x84 112 x72 x84 112 x90 x83 Electrical Power input 200,220,380,415,440(575) V,3 Phase, 50/60 Hz Max. power ration 4KVA (6 KVA) Max. EDM current 25+25(optional) Amperes Min. command unit 0.0025 (0.001mm) 0.0025 (0.001mm) 0.0125 (0.005mm) 0.0125 (0.005mm) Resolution 0.0025 (0.001mm) 0.0025 (0.001mm) 0.0125 (0.005mm) 0.0125 (0.005mm) Feed back unit 1μ Linear scale 1μ Linear scale 5μ (with 1μ Linear scale) 5μ (with 1μ Linear scale) Manual speed 4 speed (Slow, Middle, High, Rapid) by parameter setting Program axis 3 axis 3 axis stand/ 4 axis (optional) EDM parameter By selection work piece, electrode material & size of EDM parameter On line help Standard Graphic function Standard Monitor 10.4 inch TFT or 14 Inch color CRT SDNC16P $54000.00 Machine Only $64000.00 w/ auto tool changer $63000.00 w/ 4th axis Automatic Electrode Changer (16 station Changer) for model SDNC16P. Controller CPU Pentium Monitor 14 CRT or LCD FDD 3.5 Floppy Disk HDD Suitable size Port RS-232 standard Keyboard Keypad, Ext. keypad socket DRAM Suitable for system running ICON Edit Standard On-Line Help Standard Auto-Restart Standard Edge Finder Standard EDM Parameters 600 Linear Motion Interpolation Rapid Feed Standard Circle Motion Interpolation Sub-program Call Call sub in fi le Print Program Printer port Network (Ethernet) Optional Workpiece Rotate Standard Program Rotate Standard Graphic with Bounded Standard Touch Protection Standard Coordinates G54 to G59

EDM & ACCESSORIES CNC CONTROL SYSTEM (0.0001 Resolution with Auto Depth Control). 50 Amp. Max. Machining Current. High Pressurize Pump. C-5 Grade Ball Screws. Motorized Backslide. Stainless Steel Work Table. Main Specifications : Drilling 0.006-0.250 Table Size 20.6 x 12.8 Max. Work Piece Weight 500 lb. Max workpiece size: ( L X W X H ) 32 X 25.5 X 27.5 Table Travel 15.75 X 11.75 Quill Servo Travel (Z1) 14.7 Motorized Backslide (Z2) 13.84 Max distance from guide to tabletop 16 Packing Dimension 2 PCS. Weight (APPROX.) 3,300 lb. SDNC4030 $86,420.00 SDNC6040 Shown GROMAX Chiller -OIL Series Oil Cooler for Wire EDM Application: CNC wire cutting machine High speed spindle Laser cutting machine PCB drilling machine Electrode cooling of spot welder Plastic injection molding machine Printing machines Semiconductor manufacturing equipment Medical instrument Feature: Precisely control temperature of industrial machines, improve production effi ciency and reduce cost. Uses stainless steel for water circuit. Multi-safe devices are equipped to secure the operator and cooler safety. No need for cooling water tower. Item/ HWV-250PS HWV-400PS HWV-600PS HWV-750PS HWV-1000PS HWV-2RPS HWV-3RPS HWV-4RPS HWV-5RPS Coolingcapacity KCAL/H 50/60 Hz 840/1000 1250/1500 1700/2100 2500/3000 3750/4500 5000/6000 7500/9000 10000/12000 12500/15000 W 50/60Hz 980/1170 1450/1750 1970/2450 2900/3500 4350/5250 5800/7000 8700/10500 11600/14000 14500/17500 BTU/H 50/60Hz 3300/4000 5000/6000 6700/8300 10000/12000 15000/18000 20000/24000 30000/36000 40000/48000 50000/60000 Temp. A Fixed temperature control type (setting range 10~40 o C) controller B Differential temperature control type (tracing room/machine body temperature, setting range -10 ~ +10 o C) Use Ambiet temp.xc 10 ~ 40 o C range Oil temp.xc 10 ~ 30 o C Power source 3X 200 ~ 230V 50/60 Hz Motor W 500/50 820/95 1180/95 1700/125 2320/125 3690/560 4540/750 6210/750 Compressor/Pum/Fan Heat dissipation Air cooled Pump W 57 80 750 750 1080 Max. Flow Rate 27/31 32/38 58/75 58/75 100/150 L/min Max. Liquid Lift M 3.1/4.3 3.8/5.4 28/40 28/40 28/40 Inlet pipe diameter PT 1/2" 3/4" 1" 1-1/4" Outlet pipe diameter PT 1/2" 3/4" 1" 1-1/4" Dimension WDH mm 360x440x640 420x520x820 480x520x975 680x450x1220 750x750x1250 1085x735x1400 page 15

EDM & ACCESSORIES GROMAX Precision Ceramic Guide and Tubing Spare Parts for EDM Drilling Machine Special Precisely fit for ceramic guide Less Electrode ware, cut faster 16 (400mm) tubing is more economical than 12 (300mm) OD Tolerance:+0, -0.020mm (+0, -0.0008 ) TUBING & WIRE Tubing & Guide Ultra Precise Electrode Tubes: 400mm/ 15.75 length OD Tolerance: +0, -0.020mm (+0, -0.0008 ) Available in brass & copper Thick-wall design provides complete counter boring for deep hole drilling Capillary Extrusion- Special manufacturing technology offers excellent straightness & concentricity ID Tolerance: +0.020, -0 mm (+0.0008, -0) GROMAX Precision Ceramic Guide and Tubing Spare Parts for EDM Drilling Machine D 1.22 Hole pattern for CG010 ~ CG350 D=5.98mm/ 0.2355 CG360 ~ CG600 D=8.98mm/ 0.3535 New @ www.gromaxonline.com Long Version Ceramic Guide Overall Length: 50mm, 75mm, 80mm Type A Type B CODE SIZE (mm) INCH Equivalent Ceramic Guide : CG Brass Tubiing : BR Copper Tubing : CP Multi-Channel Brass Tubing : MCBR Multi-Channel Copper Tubing : MCCP Micro EDM Tubing Thick Wall Tubing 010 0.10 0.004 0.00394 $198.00 $180.00* $180.00* 013 0.13 0.005 0.00512 $178.00 $140.00* $140.00* 015 0.15 0.006 0.00591 $168.00 $120.00* $120.00* 016 0.16 0.006 0.00630 $128.00 $100.00* $100.00* 017 0.17 0.007 0.00670 $128.00 $100.00* $100.00* 018 0.18 0.007 0.00709 $128.00 $100.00* $100.00* 019 0.19 0.007 0.00748 $128.00 $100.00* $100.00* 020 0.20 0.008 0.00787 $128.00 $95 / $70** $95 / $70** 021 0.21 0.008 0.00827 $128.00 $95 / $70** $95 / $70** 022 0.22 0.009 0.00867 $128.00 $95 / $70** $95 / $70** 023 0.23 0.009 0.00906 $128.00 $95 / $70** $95 / $70** 024 0.24 0.009 0.00945 $128.00 $95 / $70** $95 / $70** 025 0.25 0.010 0.00984 $128.00 $90 / $65** $90 / $65** 026 0.26 0.010 0.01024 $128.00 $90 / $65** $90 / $65** 027 0.27 0.011 0.01063 $128.00 $90 / $65** $90 / $65** 028 0.28 0.011 0.01102 $128.00 $90 / $65** $90 / $65** 029 0.29 0.011 0.01142 $128.00 $90 / $65** $90 / $65** 030 0.30 0.012 0.01181 $108.00 $50 / $42** $50 / $42** 035 0.35 0.014 0.01378 $108.00 $50 / $42** $50 / $42** 040 0.40 0.016 0.01575 $108.00 $50 / $42** $50 / $42** $ 44.00 $ 44.00 045 0.45 0.018 0.01772 $108.00 $50 / $42** $50 / $42** $ 44.00 $ 44.00 050 0.50 0.020 0.01969 $108.00 $ 54.00 $ 54.00 $ 40.00 $ 40.00 055 0.55 0.022 0.02165 $108.00 $ 54.00 $ 54.00 $ 40.00 $ 40.00 060 0.60 0.024 0.02362 $108.00 $ 54.00 $ 54.00 $ 36.00 $ 36.00 065 0.65 0.026 0.02559 $108.00 $ 54.00 $ 54.00 $ 36.00 $ 36.00 070 0.70 0.028 0.02756 $108.00 $ 54.00 $ 54.00 $ 36.00 $ 36.00 075 0.75 0.030 0.02953 $108.00 $ 54.00 $ 54.00 $ 36.00 $ 36.00 080 0.80 0.032 0.03150 $108.00 $ 54.00 $ 54.00 $ 36.00 $ 36.00 085 0.85 0.033 0.03346 $108.00 $ 54.00 $ 54.00 $ 36.00 $ 36.00 090 0.90 0.035 0.03543 $108.00 $ 54.00 $ 54.00 $ 36.00 $ 36.00 095 0.95 0.038 0.03740 $108.00 $ 54.00 $ 54.00 $ 36.00 $ 36.00 100 1.00 0.040 0.03937 $108.00 $ 54.00 $ 54.00 $ 36.00 $ 36.00 105 1.05 0.041 0.04134 $108.00 $ 58.00 $ 58.00 $ 40.00 $ 40.00 110 1.10 0.043 0.04331 $108.00 $ 58.00 $ 58.00 $ 40.00 $ 40.00 115 1.15 0.045 0.04528 $108.00 $ 58.00 $ 58.00 $ 40.00 $ 40.00 120 1.20 0.047 0.04724 $108.00 $ 58.00 $ 58.00 $ 40.00 $ 40.00 125 1.25 0.049 0.04921 $108.00 $ 58.00 $ 58.00 $ 40.00 $ 40.00 130 1.30 0.051 0.05118 $108.00 $ 58.00 $ 58.00 $ 40.00 $ 40.00 135 1.35 0.053 0.05315 $108.00 $ 58.00 $ 58.00 $ 40.00 $ 40.00 140 1.40 0.055 0.05512 $108.00 $ 58.00 $ 58.00 $ 40.00 $ 40.00 145 1.45 0.057 0.05709 $108.00 $ 58.00 $ 58.00 $ 40.00 $ 40.00 150 1.50 0.059 0.05906 $108.00 $ 58.00 $ 58.00 $ 40.00 $ 40.00 155 1.55 0.061 0.06102 $108.00 $ 38.00 $ 38.00 $ 40.00 $ 40.00 160 1.60 0.063 0.06299 $108.00 $ 38.00 $ 38.00 $ 45.00 $ 45.00 165 1.65 0.065 0.06496 $108.00 $ 38.00 $ 38.00 $ 45.00 $ 45.00 170 1.70 0.067 0.06693 $108.00 $ 38.00 $ 38.00 $ 45.00 $ 45.00 175 1.75 0.069 0.06890 $108.00 $ 38.00 $ 38.00 $ 45.00 $ 45.00 180 1.80 0.071 0.07087 $108.00 $ 38.00 $ 38.00 $ 45.00 $ 45.00 185 1.85 0.073 0.07283 $108.00 $ 38.00 $ 38.00 $ 45.00 $ 45.00 190 1.90 0.075 0.07480 $108.00 $ 38.00 $ 38.00 $ 45.00 $ 45.00 195 1.95 0.077 0.07677 $108.00 $ 38.00 $ 38.00 $ 45.00 $ 45.00 page 16 10pcs /pack 20pcs /pack 40pcs /pack 20pcs /pack * 200mm Length **300mm Length 10pcs /pack

TUBING & WIRE Tubing & Guide EDM & ACCESSORIES Copper Tungsten Rod CODE SIZE (mm) INCH Equivalent Ceramic Guide : CG Brass Tubing : BR Copper Tubing : CP Multi-Channel Brass Tubing : MCBR Multi-Channel CopperTubing : MCCP 200 2.00 0.079 0.07874 $108.00 $ 38.00 $ 38.00 $ 45.00 $ 45.00 205 2.05 0.081 0.08071 $108.00 $ 38.00 $ 38.00 $ 45.00 $ 45.00 210 2.10 0.083 0.08268 $108.00 $ 38.00 $ 38.00 $ 45.00 $ 45.00 215 2.15 0.085 0.08465 $108.00 $ 38.00 $ 38.00 $ 45.00 $ 45.00 220 2.20 0.087 0.08661 $108.00 $ 38.00 $ 38.00 $ 45.00 $ 45.00 225 2.25 0.089 0.08858 $108.00 $ 38.00 $ 38.00 $ 45.00 $ 45.00 230 2.30 0.091 0.09055 $108.00 $ 38.00 $ 38.00 $ 45.00 $ 45.00 235 2.35 0.093 0.09252 $108.00 $ 38.00 $ 38.00 $ 45.00 $ 45.00 240 2.40 0.095 0.09449 $108.00 $ 38.00 $ 38.00 $ 45.00 $ 45.00 245 2.45 0.097 0.09646 $108.00 $ 38.00 $ 38.00 $ 45.00 $ 45.00 250 2.50 0.099 0.09843 $108.00 $ 38.00 $ 38.00 $ 45.00 $ 45.00 255 2.55 0.100 0.10039 $108.00 $ 38.00 $ 38.00 $ 45.00 $ 45.00 260 2.60 0.102 0.10236 $108.00 $ 38.00 $ 38.00 $ 45.00 $ 45.00 265 2.65 0.104 0.10433 $108.00 $ 38.00 $ 38.00 $ 45.00 $ 45.00 270 2.70 0.106 0.10630 $108.00 $ 38.00 $ 38.00 $ 45.00 $ 45.00 275 2.75 0.108 0.10827 $108.00 $ 38.00 $ 38.00 $ 45.00 $ 45.00 280 2.80 0.110 0.11024 $108.00 $ 38.00 $ 38.00 $ 45.00 $ 45.00 285 2.85 0.112 0.11220 $108.00 $ 38.00 $ 38.00 $ 45.00 $ 45.00 290 2.90 0.114 0.11417 $108.00 $ 38.00 $ 38.00 $ 45.00 $ 45.00 295 2.95 0.116 0.11614 $108.00 $ 38.00 $ 38.00 $ 45.00 $ 45.00 300 3.00 0.118 0.11811 $108.00 $ 38.00 $ 38.00 $ 45.00 $ 45.00 310 3.10 0.122 0.12205 $168.00 $ 24.00 $ 24.00 $ 55.00 $ 55.00 320 3.20 0.126 0.12598 $168.00 $ 24.00 $ 24.00 $ 55.00 $ 55.00 330 3.30 0.130 0.12992 $168.00 $ 24.00 $ 24.00 $ 55.00 $ 55.00 340 3.40 0.134 0.13386 $168.00 $ 24.00 $ 24.00 $ 55.00 $ 55.00 350 3.50 0.138 0.13780 $168.00 $ 24.00 $ 24.00 $ 55.00 $ 55.00 360 3.60 0.142 0.14173 $168.00 $ 24.00 $ 24.00 $ 55.00 $ 55.00 370 3.70 0.146 0.14567 $168.00 $ 24.00 $ 24.00 $ 55.00 $ 55.00 380 3.80 0.150 0.14961 $168.00 $ 24.00 $ 24.00 $ 55.00 $ 55.00 390 3.90 0.154 0.15354 $168.00 $ 24.00 $ 24.00 $ 55.00 $ 55.00 400 4.00 0.158 0.15748 $168.00 $ 24.00 $ 24.00 $ 55.00 $ 55.00 410 4.10 0.161 0.16142 $168.00 $ 24.00 $ 24.00 $ 75.00 $ 75.00 420 4.20 0.165 0.16535 $168.00 $ 24.00 $ 24.00 $ 75.00 $ 75.00 430 4.30 0.169 0.16929 $168.00 $ 24.00 $ 24.00 $ 75.00 $ 75.00 440 4.40 0.173 0.17323 $168.00 $ 24.00 $ 24.00 $ 75.00 $ 75.00 450 4.50 0.177 0.17717 $168.00 $ 24.00 $ 24.00 $ 75.00 $ 75.00 460 4.60 0.181 0.18110 $168.00 $ 24.00 $ 24.00 $ 75.00 $ 75.00 470 4.70 0.185 0.18504 $168.00 $ 24.00 $ 24.00 $ 75.00 $ 75.00 480 4.80 0.189 0.18898 $168.00 $ 24.00 $ 24.00 $ 75.00 $ 75.00 490 4.90 0.193 0.19291 $168.00 $ 24.00 $ 24.00 $ 75.00 $ 75.00 500 5.00 0.197 0.19685 $168.00 $ 38.00 $ 38.00 $ 90.00 $ 90.00 510 5.10 0.201 0.20079 $168.00 $ 38.00 $ 38.00 $ 90.00 $ 90.00 520 5.20 0.205 0.20472 $168.00 $ 38.00 $ 38.00 $ 90.00 $ 90.00 530 5.30 0.209 0.20866 $168.00 $ 38.00 $ 38.00 $ 90.00 $ 90.00 540 5.40 0.213 0.21260 $168.00 $ 38.00 $ 38.00 $ 90.00 $ 90.00 550 5.50 0.217 0.21654 $168.00 $ 38.00 $ 38.00 $ 90.00 $ 90.00 560 5.60 0.220 0.22047 $168.00 $ 38.00 $ 38.00 $ 90.00 $ 90.00 570 5.70 0.224 0.22441 $168.00 $ 38.00 $ 38.00 $ 90.00 $ 90.00 580 5.80 0.228 0.22835 $168.00 $ 38.00 $ 38.00 $ 90.00 $ 90.00 590 5.90 0.232 0.23228 $168.00 $ 38.00 $ 38.00 $ 90.00 $ 90.00 600 6.00 0.236 0.23622 $168.00 $ 38.00 $ 38.00 $ 90.00 $ 90.00 Ceramic Guide and Collet for Sodick Machine Spare Parts for EDM Drilling Machine Code unit:mm SRK (K1C GUIDE) SRKC (COLLET) GOMS (GROMMET) SRKS (Spacer) 02 0.20 $165.00 $85.00 $1.50 $12.00 03 0.30 $165.00 $65.00 $1.50 $12.00 04 0.40 $155.00 $65.00 $1.50 $12.00 05 0.50 $155.00 $65.00 $1.50 $12.00 07 0.70 $155.00 $65.00 $1.50 $12.00 10 1.00 $155.00 $65.00 $1.50 $12.00 12 1.20 $155.00 $65.00 $1.50 $12.00 13 1.30 $155.00 $65.00 $1.50 $12.00 15 1.50 $155.00 $65.00 $1.50 $12.00 20 2.00 $155.00 $65.00 $1.50 $12.00 25 2.50 $155.00 $65.00 $1.50 $12.00 30 3.00 $155.00 $65.00 $2.00 $12.00 20pcs /pack 10pcs /pack 10pcs /pack We have: OD( 1 ~ 30mm ) x LENGTH( 100mm, 175mm & 200mm ) Tungsten copper rod only. * Composition : CU:W = 25 ~ 30 : 70 ~ 75 * Specific gravity : 14.2g/cm3 * Hardness : 91 HRB * Electrical conductivity (IACS) 45% Metric size: 200mm length Diameter / EACH Size (mm) 1 CTR100 $33.00 2 CTR200 $28.00 3 CTR300 $24.00 4 CTR400 $29.00 5 CTR500 $36.00 6 CTR600 $43.00 7 CTR700 $52.00 8 CTR800 $61.00 9 CTR900 $72.00 10 CTR1000 $84.00 11 CTR1100 $96.00 12 CTR1200 $111.00 13 CTR1300 $117.00 14 CTR1400 $132.00 15 CTR1500 $149.00 16 CTR1600 $166.00 17 CTR1700 $185.00 18 CTR1800 $205.00 19 CTR1900 $226.00 20 CTR2000 $248.00 21 CTR2100 $272.00 22 CTR2200 $296.00 23 CTR2300 $321.00 24 CTR2400 $347.00 25 CTR2500 $373.00 26 CTR2600 $402.00 27 CTR2700 $431.00 28 CTR2800 $459.00 29 CTR2900 $493.00 30 CTR3000 $525.00 Inch size: 8 length Diameter / EACH Size (inch) 1/8 CTR1/8 $18.00 3/16 CTR3/16 $30.00 1/4 CTR1/4 $39.00 5/16 CTR5/16 $54.00 3/8 CTR3/8 $78.00 7/16 CTR7/16 $92.00 1/2 CTR1/2 $112.00 page 17

EDM & ACCESSORIES Spare Parts for Wire EDM WIRE EDM Parts Wire EDM Spare Parts Diamond Guide Power Feed Contact Flushing Cup Connected Parts GROMAX Wire EDM Parts are made of the highest quality materials to assure consistent and lasting wear Exact tolerances are reached by each dimension finish ground Wire surfaces are polished for smoother movements These parts are for wire EDM from MITSUBISHI, FANUC, BROTHER, CHARMILLES, & JAPAX For Diamond Guide for MITSUBISHI WM101-1 WM102 WM104 WM107 WM109 WM111 WM113 WM117 WM122 WM101-2 WM103 WM106 WM108 WM110 WM112 WM114 WM120 WM124 WM101-1-08 WM101-1-10 WM101-1-12 WM101-2-08 WM101-2-10 WM101-2-12 WM102-08 WM102-10 WM102-12 WM103-04 WM103-06 WM103-08 WM103-10 WM103-12 WM104-08 WM104-10 WM104-12 WM106-08 WM106-10 WM106-12 WM107-04 WM107-06 WM107-08 WM107-10 WM107-12 WM108 Size (mm) 0.205 0.255 0.305 0.205 0.255 0.305 0.21 0.26 0.31 0.105 0.155 0.205 0.255 0.305 0.21 0.26 0.31 0.205 0.255 0.305 0.105 0.155 0.205 0.255 0.305 0.4ø, L=11 Description Wire Guide Wire Guide Position Upper & Lower Upper & Lower Machine Original P/No. New SU, DWC-N, F (Manual) DWC-F1, G (Manual) X053C082G51 X053C082G56 X053C082G65 X052B040G64 X052B040G65 X052B040G66 Wire Guide Lower DWC-F, F1, G, H, H (SK2/AF) X053C188G54 X053C188G55 X053C188G56 Wire Guide Upper & Lower DWC-HA, H, H, H1, HA, C (Manual) X052B054G51 X052B054G52 X052B054G53 X052B054G54 X052B054G55 24.10.005-030(NVT) Wire Guide Lower DWC-H, H, H1 (SK3/AF) X052B092G54 X052B092G55 X052B092G56 24.10.185-95(NVT) Wire Guide Upper DWC-H, H, G (SK1, SK2, SK3/AF) Wire Guide Upper DWC-H, HA, SA, SB, SZ, AF-1 (SK/AF) -ceramic on coolant hole- X052B102G53 X052B102G54 X052B102G55 24.10.3-(NVT) X052B240G50 X052B240G51 X052B240G52 (X052B123G53) X052B240G53 (X052B123G54) X052B240G54 (X052B123G56) 24.10.5-(NVT) $185.00 $260.00 $260.00 $220.00 $265.00 $340.00 $345.00 Set Screw Upper DWC-N, F, F1, G (Manual/AF) X054D162G54 $180.00 WM109 0.4ø Die Guide A Upper DWC-G, F, F1, H, H (SK1, X054D171G54 $230.00 SK2, SK3/AF) WM110-04 0.4 Eccentric Upper DWC-F, F1, G (SK1/AF) X053C136G52 $230.00 WM110-06 0.6 Die X053C136G54 WM111 Die Holder Upper & DWC-G, H, H, H1, C, SA, SB, X053C245H02 24.50.025(NVT) $66.00 Lower SZ (SK3/AF, AF1; Maunal) WM112 Center Die Upper DWC-G, H, H (SK1, SK2, X053C229G51 $375.00 SK3/AF) WM113 0.4ø, Set Screw Lower DWC-H1, HA, SA, SB, SZ X053C628G51 $180.00 L=2.5 (AF1) WM114 0.4 Set Screw Upper & DWC-H, H, H1, HA, SA, SB, X053C241G52 24.50.040(NVT) $180.00 Lower SZ, C (Manual) -ceramic- WM117-04 WM117-06 0.105 0.155 Wire Guide Lower DWC-H1, HA, C, CR, SA, SB, SZ, (AF1) -ceramic on coolant X052B241G51 X052B241G52 $270.00 WM117-08 0.205 hole- X052B241G53 (X052B176G53) X052B241G54 (X052B176G54) WM117-10 0.255 X052B241G55 (X052B176G55) WM117-12 0.305 24.10.4-(NVT) WM120 0.4 Set Screw Upper DWC-H1, HA, SB, SZ (AF1) -inner side ceramic- X053C524G51 24.50.015(NVT) $210.00 WM122-08 WM122-10 WM122-12 WM124-08 WM124-10 WM124-12 0.21 0.26 0.31 0.21 0.26 0.31 Wire Guide Upper & Lower DWC-70, 90, 110, 200 (Old machine, Manual/AF) X053C012G54 X053C012G56 X053C012G57 $260.00 Wire Guide Lower New SU, DWC-F (SK1/AF) X053C104G54 X053C104G55 X053C104G56 $260.00 X053C153G55 $260.00 SK3/AF) Die Guide B Upper DWC-H1, HA, SA, SB, SZ X053C508G51 $260.00 (AF1) X053C508G WM125 0.4 Sub Guide Upper DWC-F, F1, G, H (SK1, SK2, WM126-035 WM126-04 WM129C-05 WM129C-10 WM129C-15 0.35 0.4 0.5 1 1.5 Jet Nozzle Upper DWC-HA, SA, SB, SZ, SX, CX, FX, QA, RA,FA, P (AF2, AF3, AT) -ceramic- X054D826H06 X054D826H08 X058D054H02 24.65.12-(NVT) $190.00 WM129A 0.75mm Jet Nozzle w/stainless housing and ceramic insert X054D826H07 $137.00 WM125 WM126 page 18

WM129C WM131 WM133 WM130C WM132 WM134 Wire EDM Spare Parts WIRE EDM Parts WM132-08-1 WM132-10-1 WM132-12-1 WM133-04 WM133-06 WM133-08 WM133-10 WM133-12 WM133-08-1 WM133-10-1 WM133-12-1 0.21 0.26 0.31 0.105 0.155 0.205 0.255 0.31 0.21 0.26 0.31 Wire Guide Upper DWC-RA, FA (AT) X056C833G51 X056C833G52 X053C833G53 24.10.526-532(NVT) Wire Guide Lower DWC-HA, SA, SB, SX, SZ, CX, FX, QA, RA, FA (AF2, AF3) X056C426G51 X052B243G62 X052B243G63 X052B243G64 X052B243G65 24.10.547-553(NVT) Wire Guide Lower DWC-RA, FA (AT) X052B387G51 X052B387G52 X052B387G53 24.10.547-553(NVT) WM134 Ring Lower DWC-HA, SA, SB, SZ, CX, FX, SX, QA (AF2, AF3) EDM & ACCESSORIES $220.00 $220.00 $220.00 X204D293H02 $30.00 Power Feed Contact for MITSUBISHI WM001 WM003 WM005 WMT005 WM009 WM002 WM004 WM005 WM008 Size (mm) Description Position Machine Original P/No. WM001 7x22x0.7 Power Feed Upper & DWC-G, H, N,C, CR, CS, X054D125H03 $14.00 Contact Lower F, F1, G, H, H, H1, HA, SB, SZ (Manual) WM001S 7x22x0.7 Power Feed Upper & Upgraded WM001 X054D125H03 $20.00 Contact Lower WM002-1 7x22, ID:1.0 Power Feed Contact Upper DWC-HA, SB, SZ (AF1) X054D476H02 23.06.830(NVT) $22.00 WM002 7x22 Power Feed Contact WM002S 7x22 Power Feed Contact WM003 2.9x16 Power Feed Contact WM004 2.9x16 Power Feed Contact WM005 2.5x3x27.5 Power Feed Contact WM005G 2.5x3x27.5 Power Feed Contact WM005L 2.5x3x27.5 Power Feed Contact WM006 16x9x7 Power Feed Contact WM007 16x17x7 Power Feed Contact WM008 10x6x8 Power Feed Contact WM009 24.5x20 Power Feed Contact WM009G 24.5x20 Power Feed Contact WM010 Lower Size Description Position Machine Original P/No. (mm) WM130C-05 0.5 Jet Nozzle Upper DWC-H1, HA, SA, SB, SZ (AF1) S684D898P14 $200.00 WM130C-10 WM130C-15 1 1.5 -ceramic- S684D823P14 S684D898P61 WM131 Die Holder Upper DWC-H1, HA, SA, SB, SZ (AF1) X177B558H02 $65.00 WM132-04 WM132-06 WM132-08 WM132-10 WM132-12 0.105 0.155 0.205 0.255 0.31 Wire Guide Upper DWC-HA, SA, SB, SX, SZ, CX, FX, QA, RA, FA (AF2, AF3) X053C834G51 X053C834G52 X053C834G53 X053C834G54 X053C834G56 24.10.526-532(NVT) $220.00 DWC-F, G, H, HA, SA, SB, SZ (SK/AF, AF1) -auto connection- X054D129H04 23.06.805(NVT) $14.00 Lower Upgraded WM002 X054D129H04 23.06.805(NVT) $20.00 Upper DWC-F, F1, G, H (SK/AF) X054D199H01 $20.00 Upper-A for auto connection Upper DWC-F, F1, G, H (SK/AF) X054D216H01 $20.00 Upper-B for auto connection Upper DWC-G, H, H, H1, HA, SA, X054D345H01 $23.00 SB, SZ (SK/AF, AF1) auto 23.06.80-(NVT) connection (standard) Upper DWC-G, H, H, H1, HA, SA, SB, SZ (SK/AF, AF1) auto connection (tin coated: for good current flow rate) Upper DWC-G, H, H, H1, HA, SA, SB, SZ (SK/AF, AF1) auto connection (long straight) Lower DWC70, 75, 80, 90, 100, 110, 200 N (Manual) Upper DWC70, 75, 80, 90, 100, 110, 200 N (Manual) Upper & DWC-H1, HA (Manual, for Lower thin wire) Upper & Lower Upper & Lower DWC-HA. SA. SB. SZ. SX. CX. FX. QA. RA. FA (AF2, AF3, AT) DWC-HA. SA. SB. SZ. SX. CX. FX. QA. RA. FA (AF2, AF3, AT) -tin coated: for good curent flow rate- X054D345H01 23.06.80-(NVT) X054D345H01 23.06.80-(NVT) $29.00 $23.00 X054D024H01 $8.00 X054D020H01 $AUR X054D186H02 $55.00 X056C075H04 $90.00 X056C075H04 $140.00 X088D493H02 X054D990H01 $92.00 page 19

EDM & ACCESSORIES WIRE EDM Parts Wire EDM Spare Parts Flushing Cup for MITSUBISHI WM200 WM201-2 WM202B WM207 WM209 WM2101 WM211 WM203 WM201-1 WM202A WM205SET WM208 WM210 WM2102 WM212 WM215 Size (mm) Description Position Machine Original P/No. WM200 4.5ø Water Nozzle Lower DWC-H. H. H1. HA. C X183C443H01 $19.00 (Manual/AF) WM202A-4 WM202A-8 4.5ø 8ø Water Nozzle Upper DWC-G. H. H. C. H1. HA -with groove- X183C439H01 X183C439H03 24.65.015(NVT) $15.00 WM202B 4ø Water Nozzle Upper DWC-G. H. H. C. H1. HA (Manual/AF) WM203-4 WM203-6 WM203-8 =WM202B 6ø =WM204 Water Nozzle Upper DWC-G. H. H. C. CA. H1. HA (Manual/AF) WM204 8ø Water Nozzle Upper DWC-H. H. C. H1. HA (Manual/AF) -plastic for G, H Series- WM205SET L=10, 20, 30, 50 Water Nozzle Upper (Set) DWC-G. H. H. C. H1. HA -long nozzle- WM207 4ø Water Nozzle Lower DWC-F1. G. H. H1. HA. C (Manual) -ditch acrylic- WM207-1 4ø Water Nozzle Lower DWC-F1. G. H. H1. HA. C (Manual) -ditch brass- WM2102-4 WM2102-6 WM208-4 WM208-6 WM208-8 4ø 6ø 4ø 6ø 8ø Water Nozzle Lower DWC-F1. G. H. H1. HA. C (Manual) -ceramic- Water Nozzle Lower DWC-F1. G. H. H (Manual/ SK1, SK2, SK3/AF) WM209 8ø Water Nozzle Lower DWC-F1. G. H. H. H1. HA.C (Manual/AF) WM210-4 WM210-8 WM210-1-4 WM210-1-8 WM2101-4 WM2101-8 WM211-4 WM211-6 WM211-8 WM212-4 WM212-8 WM212-1-4 WM212-1-8 WM2103-4 WM2103-8 WM215-4 WM215-8 WM215-10 WM216 WM217-4 WM217-6 WM217-8 4ø 8ø 4ø 8ø 4ø 8ø 4ø, L=8 8ø, L=8 4ø 8ø 4ø 8ø 4ø 8ø 4ø 8ø OD: 65ø ID: 15.5ø 4ø 6ø 8ø Water Nozzle Upper DWC-H1. HA. SA. SB. SZ (AF1) Water Nozzle Lower DWC-HA. SA. SB. SZ. CX. SX. FX. QA. RA. FA (AF2, AF3, AT) -acrylic- Water Nozzle Lower DWC-HA. SA. SB. SZ. CX. SX. FX. QA. RA. FA (AF2, AF3, AT) -brass- Water Nozzle Lower DWC-HA. SA. SB. SZ. SX. CX. FX. QA. RA. FA (AF2, AF3, AT) -ceramic- Water Nozzle Upper DWC-HA. SA. SB. SZ. SX. CX. FX30. FX-K, QA, RA, FA (AF2, AF3, AT) Nozzle Holder Upper DWC-HA. SA. SB. SZ. SX. CX (AF2, AF3, AT) X183C439H01 $15.00 24.65.015(NVT) X183C439H01 $15.00 X183C439H02 X183C439H03 X183C439H03 $15.00 $65.00 X053C491H01 $10.00 X053C491H01 $15.00 X054D209H11 $80.00 X054D209H12 X054D209H11 $15.00 X054D209H12 X054D209H13 X053C491H03 $15.00 Water Nozzle Lower DWC-H1. HA. SA. SB. SZ (AF1) -cut acrylic- Water Nozzle Lower DWC-H1. HA. SA. SB. SZ (AF1) -cut brass- Water Nozzle Lower DWC-H1. HA. SA. SB. SZ (AF1) -cut ceramic- 24.65.00-10- $15.00 (NVT) 24.65.00-10- $20.00 (NVT) X053C621H01 $80.00 X053C621H03 24.65.105(NVT) X183C378H01 $19.00 X183C378H02 X183C378H03 24.65.001(NVT) 24.65.008(NVT) $15.00 24.65.008(NVT) $25.00 X054D881H03 $80.00 X054D881H04 24.65.108(NVT) X186C793H01 $19.00 X186C793H02 24.65.010(NVT) X186C793H03 X182B458H02 $60.00 Water Nozzle Upper FX10. FX20 (AF3) X196C45AH01 X196C45AH02 X196C45AH03 $20.00 WM216 WM217 WM204 WM2103 page 20

Connected Parts for MITSUBISHI For WM301 WM303 WM305 WM307 WM401C WM403C WM405C WM407C WM409C WM302 WM304 WM306 WM400 WM402C WM404C WM406C WM408C WM410C Wire EDM Spare Parts WIRE EDM Parts Size (mm) WM301 Isolator Plate Upper DWC-F1. G. H. H. H1. HA. C (Manual) -taper cut- Description Position Machine Original P/No. X053C162H01 24.50.104(NVT) $130.00 WM302 Isolator Plate Upper DWC-F1. G. H. H (Manual) X054D185G51 $170.00 WM303 Isolator Plate Lower DWC-F1. G. H. H (SK1/AF) X053C228G52 $185.00 WM304 Isolator Plate Lower DWC-SA. SB. SZ (AF1/AF2) X053B166G51 $325.00 WM305 Isolator Plate Lower DWC-110H1, 200H1, 110HA, 200HA (Manual/AF) WM306 Isolator Plate Lower DWC-90H1, 90HA. 90C (Manual/AF) X053C443H01 24.50.102(NVT) X053C314H01 24.50.100(NVT) $140.00 $125.00 WM307 Isolator Plate Lower CX. SX (AF2, AF3) X056C110G51 $170.00 WM308 Isolator Plate Lower FX10 (Manual/AF), FX1 X056C273G51 $170.00 WM309 Isolator Plate Lower FX20. FX30 (Manual/AF) X056C356G51 $170.00 WM310 Isolator Plate Lower FA10 (AT) X056C968G51 $240.00 WM400 Aspirator Lower DWC-H1. HA. C. SA. SB. SZ X198D838H01 $25.00 (AF1, AF2/Manual) -brass- WM400-1 Rectifier Ring Lower DWC-H. H1. HA. SZ. C. SB. SA. SX. CX. FX. QA. RA. FA (AF1, AF2, SK3, AT, Manual) X194D998H02 $19.00 WM401C 18x57 Pinch Roller Feed Section DWC-F. F1. G. H. H (SK1, SK2) CX: beginning period (AF3) -ceramic- WM402C 18x57 Capstan Roller Feed Section DWC-F. F1. G. H. H (SK1, SK2) CX: beginning period (AF3) -ceramic- WM403C 25x57 Pinch Roller Feed Section DWC-H. H1. HA. SZ. C. SB. SA (SK3/AF1, AF2) (Ceramic) WM404C 25x57 Capstan Roller Feed Section DWC-H. H1. HA. SZ. C. SB. SA (SK3/AF1, AF2) -ceramic- WM405C 32x57 Pinch Roller Feed Section DWC-H1. C. HA. SA. SB. SZ. SX (Manual/AF) Gear Type -ceramic- WM406C 32x57 Capstan Roller Feed Section DWC-H1. C. HA. SA. SB. SZ. SX (Manual/AF) Gear Type -ceramic- EDM & ACCESSORIES X054D257G51 X058D078G51 X054D256G51 X058D077G51 $225.00 $225.00 X054D413G51 $225.00 X054D412G51 $240.00 X053C779G51 $240.00 X053C778G51 $225.00 WM407C 18x57 Pinch Roller Feed Section FX (Manual/AF) -ceramic- X058D340G51 $225.00 WM408C 18x57 Capstan Feed Section FX. QA (Manual/AF) X058D339G51 $225.00 Roller -ceramic- WM409C 25x57 Pinch Roller Feed Section FA (AT) -ceramic- X055C008G51 $215.00 WM410C 25x57 Capstan Feed Section FA (AT) -ceramic- X055C009G51 $215.00 Roller WM420 Gear Feed Section DWC-C, H1, HA, SA, SB, X058D501H01 $36.00 SZ, SX, FX, RA, FA (AF1, AF2, AF3, AT) -for WM405C & WM406C- WM420-1 Gear Feed Section for WM407C & WM408C X054D744H02 $37.00 WM421C Roller Lower FX. QA. RA. FA (AF3, AT) -ceramic- X203C607H03 $104.00 WM420 WM421C WM445 WM452 WM423 WM425 WM451 WM452-1 WM423 Aspirator Lower DWC-HA. SA. SB. SZ. SX. CX. FX. QA. RA. FA (AF2, AF3, AT) WM425 Urethane Roller WM445 60ø Water Cover Upper DWC-H. H. C. H1. HA. SA. SB. SZ (for WM202, WM211) WM451 Cap Screw Upper & Lower DWC-N. F. F1. G. H. H. H1. C. HA (Manual) -for power supply block- WM452 Die Block Upper DWC-F1. G. H. H. H1. C. HA (Manual) -including WM451 and connector- WM452-1 Die Block Upper DWC-F1. G. H. H. H1. C. HA, CR, CA (Manual) WMS100 100x 10 x16(thick) Urethane Roller for Tension Brake page 21 X053C920G51A (X053C829G54) $70.00 Upper RA, FA (AT) X058D912G51 $95.00 X199D297H02 $20.00 X179D323H02 $9.00 X176C706H02 $227.00 X176C706H02 $192.00 DWC - F, G, H, HA series X053C175G51 $148.00

EDM & ACCESSORIES WIRE EDM Parts Wire EDM Spare Parts Connected Parts for MITSUBISHI For WM453 WM453-2 WM454 WM456 WM458 WM460 WM501 WM453-1 WM453-3 WM455 WM457 WM459 WM470 Size Description Position Machine Original P/No. (mm) WM453 Die Block Lower $310.00 WM453-1 Die Block Lower DWC-F1. G. H. H (Manual/ X176C610H01 $147.00 AF) WM453-2 Stopper Lower DWC-G.H (Manual/AF) X184D271H06 $73.00 WM453-3 Die Block Lower DWC-G. H (Manual/AF) -for $73.00 arm parts- WM454 Die Block Lower DWC-H1. HA (Manual/AF) X177B046H03 $192.00 WM455 Pulley B Lower DWC-F. F1. G. H. H (Manual) -including shaft, brass cover, bearing and screw- X602B845G51 $88.00 WM456 Roller Lower DWC-H1. HA. SA. SB. SZ. SX. CX (Manual/AF) -with retaining ring- WM457 7ø Bearing DWC-H1. HA. SA. SB. SZ. SX. C.X (Manual/AF) -for WM456 R-1970- WM458 8ø Bearing DWC-F. F1. G. H. H. H1. HA. C. SA. SB. SZ. SX. CX. QA. FA. RA (Manual/AF) -for WM401C, WM403C, WM405C, WM407C R-1980- X183C442H01 $49.00 24.10.800(NVT)+ S922N040P07 S859N319P33 $15.00 S859N319P31 $11.00 WM459 Die Block Lower DWC-90C (Manual) X177B713H02 $1,130.00 WM459-1 Plastic Cover Lower DWC-H1. HA (AF1) X198D777H01 $43.00 WM459-2 Fixing Plate Lower DWC-H1. HA (Manual/AF) $29.00 WM459-3 Cover Lower DWC-H1. HA (Manual/AF) X198D776H01 $43.00 WM459-4 Wave Washer Lower DWC-H1. HA. SA. SB. SZ. S913N313P11 $5.00 SX. CX (Manual/AF) -for WM456- WM459-5 Spacer Lower DWC-H1. HA. SA. SB. SZ. SX. CX (Manual/AF) -for WM456- X194D873H01 $6.00 WM459-6 Retaining Ring DWC-H1, HA, SA, SB, SZ, SX, CX (Manual/AF) -for WM456- WM460 Clamping (Manual/AF) -for WM454- - stainless- WM470 WM470-1 Power Feed Holder Power Feed Holder Lower Upper DWC-HA. SA. SB. SZ. CX. FX. RA. FA (AF2, AF3, AT) -for WM009- DWC-HA, SZ, SB, SA, SX, CX (AF2, AF3) S922N040P07 $5.00 X189D690H04 $38.00 X209D212H01 $54.00 X208D405H01 $54.00 WM501 Cutter Unit Cutter CX: end period. FX (AF3) X056C326G51 $460.00 WM501-1 Fixed Plate Cutter CX: end period. FX (AF3) X058D376H01 $96.00 WM501-2 Aspirator Cutter CX: end period. FX (AF3) X203C145H04 $149.00 WM501-3 Detecting Cutter CX: end period. FX (AF3) X258D350H01 $15.00 Nozzle WM502 Cutter Unit Cutter CX: beginning period. (AF3) X058D186G51 $525.00 WM502F Fixed Blade Cutter CX (M/C) (=M502-1) $106.00 WM502.MB Main Blade Main Blade for WM502 $195.00 WM608V =WF501 Bearing FX, QA, RA, FA (AF3/AT) -for WM421C- P840F000P67 P840F000P69 (=M422) WMCT421 Insulator Tip for limit switch -ceramic- Switch Patent No. P421A030P000 $15.00 $32.00 WM502 WM501-1 WM501-2 WM501-3 WM502F WM608V page 22

Wire EDM Spare Parts WIRE EDM Parts EDM & ACCESSORIES Diamond Guide for SODICK Size (mm) Description Position Machine Original P/No. WS100-08 WS100-10 WS100-12 0.21 0.26 0.31 Wire Guide Upper & Lower AQ. A. AW. EPOC Series. AP200~550. PGW200. EXC100. BF. JL Series (AF) - diamond- 3081436 3083330 3083331 $2,150.00 WS100 WS101 WS101-08 WS101-10 WS101-12 0.21 0.26 0.31 Wire Guide Upper & Lower AQ. A. AW. EPOC Series. AP200~550. PGW200. EXC100. BF. JL Series (AF) (dia: 0.22, 0.27, 0.32mm also available) -sapphire-(made in Japan) 3080047(0.21) 3080058(0.22) 3080629(0.26) 3080061(0.27) 3081934(0.31) 3080063(0.32) $360.00 WS102 WS103 WS102-08 WS102-10 WS102-12 0.21 0.26 0.31 Wire Guide Upper & Lower 150W. AP150. AW Series. EPOC300. 500. 600. 800. BF250. BF275 (Manual) (dia:0.22, 0.27, 0.32mm also available) 3080244(0.21) 3080245(0.22) 3080248(0.26) 3080249(0.27) 3080250(0.31) 3080251(0.32) $260.00 WS103-08 WS103-10 WS103-12 0.21 0.26 0.31 Wire Guide Upper & Lower AQ. A. AW. EPOC Series. AP200~550. PGW200. EXC100. BF. JL Series (Manual: U&L/ AF: L)(dia: 0.22, 0.27, 0.32mm also available) 3081000(0.21) 3080982(0.22) 3080990(0.26) 3081017(0.27) 3080991(0.31) 3081018(0.32) $260.00 WS103L WS104 WS103L-08 WS103L-10 WS103L-12 0.21 0.26 0.31 Wire Guide Upper & Lower A280L. 320L. AW. EPOC Series (dia: 0.32mm also available) -3mmø 87-3L long type- 3081136(0.21) 3081138(0.26) 3081139(0.31) 3081718(0.32) $299.00 WS105 WS104-08 WS104-10 WS104-12 0.21 0.26 0.31 Wire Guide Upper & Lower AQ. A. AW. EPOC Series. AP200~550. PGW200. EXC100. BF. JL Series (AWT Die A)AWT Die A (dia: 0.22, 0.27, 0.32, 0.35, 0.4, 0.6mm also available) -sapphire- 3080219(0.21) 3080220(0.22) 3080223(0.26) 3080224(0.27) 3080225(0.31) 3080226(0.32) 3080227(0.35) 3080229(0.4) 3085043(0.6) $315.00 WS105-08 WS105-10 WS105-12 0.21 0.26 0.31 Wire Guide Upper & Lower AP150 (Manual) -long type) $285.00 WS106 (0.8mm) 0.21 Sapphire Guide Guide C (Sapphire) ID=0.8mm 3080065 $86.00 Power Feed Contact for SODICK WS001 WS003S WS005LS WS002 WS004S Size (mm) Description Position Machine Original P/No. WS001 18x10 Power Feed Contact Upper 1W. 150W. 330W. 453W. 654W. AP150. BF250. BF275. EPOC300. AW Series. (Manual) 3080316 $35.00 WS002 18x14 Power Feed Contact WS003S 16x10 Power Feed Contact WS004S 14x11x12 Power Feed Contact WS005LS 12.5x14x11.7 Power Feed Contact WS005LT 12.5x14x11.7 Power Feed Contact page 23 Upper & Lower 150W. 330W. 453W. 654W. 1WH. AP150. BF250. BF275. G3A. EPOC301. AW Series. (Manual) Upper 150W. 330W. 453W. 654W. 1WH. AP150. BF250. BF275. G3A. EPOC (Manual) -silver tungsten- Upper 150W. AP150. BF250. BF275. EPOC303. AW Series. E3 WS. BF250. E300.500 (Manual) -silver tungsten- Upper, Left Upper, Left AW330. 453. BF250. BF275. EPOC300. 500. 600. 800 E3WS (Manual) -silver tungsten- AW330. 453. BF250. BF275. EPOC300. 500. 600. 800 E3WS (Manual) -tungsten carbide- 3080314 23.06.630(NVT) 3080318 23.06.625(NVT) $95.00 $110.00 3080324 $127.00 3080308 23.06.612(NVT) 3080308 23.06.612(NVT) $125.00 $108.00

EDM & ACCESSORIES WIRE EDM Parts Wire EDM Spare Parts WS005RS WS007S WS009S WS006S WS008S WS010 Size (mm) Description Position Machine Original P/No. WS005RS 12.5x14x11.7 Power Feed Contact Upper, Right AW330. 453. BF250. BF275. EPOC300. 500. 600. 800 E3WS (Manual) -silver tungsten- 3080307 23.06.611(NVT) $125.00 WS005RT 12.5x14x11.7 Power Feed Contact WS006S 12.5x19x11.6 Power Feed Contact WS007S 10x10x20 Power Feed Contact WS008S 12x20.6 Power Feed Contact WS009S 10x8x30 Power Feed Contact WS010 4.8x40x20 Power Feed Contact Upper, Right Lower Upper & Lower Upper & Lower Upper & Lower Upper & Lower AW330. 453. BF250. BF275. EPOC300. 500. 600. 800 E3WS (Manual) -tungsten carbide- AW330. 453. BF250. BF275. EPOC Series. E3WS -silver tungsten- 3080307 23.06.611(NVT) 3080311 23.06.620(NVT) 150W -silver tungsten- 3081325 $ $108.00 $136.00 3080320 $95.00 3080301 23.06.650(NVT) 3085936(new#), 3080972(old#), 3084592(old#) $135.00 $61.00 Flush Cup for SODICK WS201 WS203 WS206 WS208 WS209L WS209W2 WS202 SET WS205 WS207 WS209 WS209W WS209WS Size (mm) 150W. AP150 -silver tungsten- A. AW. EPOC Series. BF250. BF275. AP300~AP550. -silver tungsten- AQ. AW. A. AP200~AP550. PGW200. EXC100. BF. JL Series. EPOC Series (Manual/AF) Description WS201 5ø Nozzle NE Upper & Lower WS202 5ø Rectifier Nozzle WS202SET Water Guide WS203 6ø Water Nozzle WS204 5ø Water Nozzle WS205 10ø Water Nozzle WS206 5ø Water Nozzle WS207-3 WS207-4 WS207-6 WS207-10 WS207-12 WS208-3 WS208-6 WS209-3 WS209-4 WS209-6 WS209-10 WS209-12 3ø 4ø 6ø 10ø 12ø 3ø 6ø 3ø 4ø 6ø 10ø 12ø Nozzle C Nozzle G3 Nozzle G4 Nozzle H2 Nozzle T2 Water Nozzle Nozzle E3 Nozzle E4 Nozzle A Nozzle H1 Nozzle T1 Position Machine Original P/No. Upper & Lower Upper & Lower Upper & Lower Upper & Lower Upper & Lower Upper & Lower Upper 330W. 453W. 654W. EPOC3W (Manual) -for 84 type SUS assy- E3WS, BF250, BF275, EPOC302, EPOC300, AW330,453 (Manual) -water guide 3WS assy- BF250. BF275. EPOC Series. E3WS. AW330.453 (Manual) -3WS assy- AP150. PGW150 (Manual) -water guide P- 150W. 330W. 453W. 654W. G3A. AP150. AW150. AW330.453. EPOC (Manual) 150W. 330W. 453W. AP150. AW150. AW330.453. EPOC (Manual) 150W. 330W. 453W. 654W. G3A. AP150. AW150. AW330.453. EPOC (Manual) -with nose- AQ. A. EPCO Series. AP200~AP550. PGW200. EXC110. BF. JL Series AW330. 453 (AWT) Lower A350. 500. AW330. 453. 454. 455. 456. BF Series Upper & Lower A. AQ. EPOC Series. AP200~AP550. AW330. 453. PGW200. EXC100. BF. JL Series (Manual: U&L/AF: L) 3081594 $7.00 3082085 $12.00 3080639 (3082085+ 3080030+ 3080593+ 3080358) 3082056 24.66.005(NVT) $42.00 $12.00 3082055 $10.00 3082055 $12.50 3082055 $11.00 3082997(3mm) 3082998(4mm) 3081604(6mm) 3081606(10mm) 3081868(12mm) $10.00 3081677 $11.00 3082128(3mm) 3082207(4mm) 3081674(6mm) 3081675(10mm) 3081867(12mm) $11.00 WS209L L=4 Nozzle Lower A Series, PGW, AP -long head- $14.00 WS209W 6ø Nozzle Lower AQ. A Series. AP300~AP500 3086386 $12.00 S87-3 (AWT) -float nozzle S87-3 WS209W2 6ø Nozzle Lower AQ330W -float nozzle- $18.00 WS209WS Spring Ring Lower AQ, A Series, AP300~550 (AWT) -for float nozzle- 3086221 $10.00 WS210 3ø Water Nozzle Lower A280L, 500L, AW320, AW350, L Series (AWT) 3082830 $16.00 WS210 page 24

For Connected Parts for SODICK WS399 WS400C WS405 WS408 WS411 WS413 WS415 WS417 WS5047 WS5051 WS5055 WF101 WF103 WF102 WF105 WS400 WS401 WS407 WS409 WS412 WS414 WS416 WS417A WS5034 WS5048 WS5053 Wire EDM Spare Parts WIRE EDM Parts WS407 WS408 Nozzle Holder Nozzle Holder WS409 Nozzle Holder WS411 Urethane Roller WS412 10ø Urethane Roller WS413 7ø + M5 Urethane Roller Upper & Lower Upper AQ. A. EPOC Series. AP200~AP550. PGW200. EXC100. BF. JL Series (Manual: U&L/AF: L for WS209) AQ. A. EPOC Series. AP200~AP550. PGW200. EXC100. BF. JL Series Upper (AWT for WS207) 3081032 $97.00 3082526 $100.00 Upper & 3081983 $100.00 Lower Upper A, AP, BF, EPOC Series 3051534 $100.00 Upper A350D. A320. BF. AP. EPOC (M/C Type) $110.00 Upper BF275, Old (M/C Type) $110.00 WS414 70x20 Roller B Feed A500W, BF275 3052991 $535.00 Section WS415 70x20 Roller C Feed A500W, BF275 3052992 $535.00 Section WS416 Tension Upper A530D, AQ325, AQ325L 3053703 $135.00 Urethane Roller WS417 100x19x22 Urethane AQ325L, 535L, AQ SERIES AP200 3053403, 3054678 $150.00 Roller WS417A 100x10x22 Urethane Lower A320, AQ530, (AQ325-OLD TYPE) 3051534 $150.00 Roller WS500 AWT Cutter Upper (for AWT) 3080035 (=S035W) $12.00 3080748,3080689 WS5047 70x12 Roller B Feed A Series 3052147 $580.00 Section WS5048 Roller B BF275 $115.00 WS5051 Roller C A Series -ceramic- 3052149 $580.00 WS5053 Roller C A300. 320. 530 $97.00 WS5013 Die Block Only 3081247 $635.00 WS5013SET.U Die Block Upper $1120.00 WS5013SET.L Die Block Lower $1150.00 WS5031 Pully V Ceramic w/ 3051205 $355.00 Shaft WS5032 Pully V Ceramic Only 3051799 $260.00 WS5034 72x58x25 AQ325m Ceramic Pulley Base,72x58x25mm (t) $420.00 Diamond Guide for FANUC WF101-08 WF101-10 WF101-12 WF102-08 WF102-10 WF102-12 WF103-06 WF103-08 WF103-10 WF103-12 Size (mm) 0.205 0.255 0.305 0.205 0.255 0.305 0.155 0.205 0.255 0.305 Size (mm) Description Position Machine Original P/No. WS399 Pulley B A Series - ceramic- 3051799 $291.00 WS400 25 Pulley E EPOC, BF, A Series (Manual, for AF- 3050098 $82.00 Belt/SUS) WS400C 25 Pulley E EPOC, BF, A Series (Manual, for AF- 3050131 $210.00 Belt/Ceramic) -w/ 2mm groove- WS401 Bearing -for Pully 626LLB- 626RS (LLB) $9.00 WS405 Wire Roller Upper AP200 3050152 $55.00 Description Position Wire Guide Upper O. P. Q. R. T. Mate. W Series (Manual) Machine Original P/No. Wire Guide Lower O. P. Q. R. T. Mate. W Series (Manual) EDM & ACCESSORIES A290-8021-X765 A290-8021-X766 A290-8021-X767 24.06.100-2(NVT) A290-8021-X775 A290-8021-X776 A290-8021-X777 24.06.110-2(NVT) Wire Guide Upper O. P. Q. R. T. W Series (AWF) A290-8032-X774 A290-8032-X775 A290-8032-X776 A290-8032-X777 24.06.150-4(NVT) $210.00 $210.00 $240.00 WF104-06 0.155 Wire Guide Lower A290-8032-X734 $382.00 WF105-08 WF105-10 WF105-12 0.205 0.255 0.305 Wire Guide Lower K. M. N. L Series (AWF) A290-8018-X443 A290-8018-X444 A290-8018-X445 $260.00 WF106 page 25

EDM & ACCESSORIES For Size (mm) WF107 WF110 WF112 WF113L WF125-1 WF108 WF111 WF113 WF124 WF106-08 WF106-10 WF106-12 WF107-08 WF107-10 WF107-12 WF108-08 WF108-10 WF108-12 WF110-08 WF110-10 WF110-12 WF111-08 WF111-10 WF111-12 WF112-08 WF112-10 WF112-12 WF113-08 WF113-10 WF113-12 WF113L-08 WF113L-10 WF113L-12 0.205 0.255 0.305 0.205 0.255 0.305 0.205 0.255 0.305 0.205 0.255 0.305 0.205 0.255 0.305 0.205 0.255 0.305 0.205 0.255 0.305 0.205 0.255 0.305 Description Wire Guide Position Upper & Lower Machine Original P/No. K. M. N. L Series (Manual, 300A power supply) A209-8011-X833 A290-8011-X834 A290-8011-X835 Wire Guide Upper K. M. N. L Series (AWF) 60C A290-8018-X463 A290-8018-X464 A290-8018-X465 24.06.13-(NVT) Wire Guide Upper & Lower K. M. N. L Series (Manual, 60C power supply) A290-8011-X753 A290-8011-X754 A290-8011-X755 24.06.12-(NVT) $260.00 $270.00 $270.00 Wire Guide Upper a -0A, 0B, 0C, ia, ib Series (Manual) A290-8101-X733 A290-8101-X734 A290-8101-X735 24.06.170-182(NVT) $290.00 Wire Guide Lower a -0A, 0B, 0C, ia, ib Series (Manual) A290-8101-X743 $290.00 A290-8101-X744 A290-8101-X745 24.06.190-202(NVT) Wire Guide Upper a -1A, 1B, 1C, ia, ib (AWF) A290-8092-X705 $265.00 A290-8092-X706 A290-8092-X707 24.06.210-222(NVT) Wire Guide Lower a -1A, 1B, 1C, ia, ib Series (AWF) A290-8110-X715 $255.00 A290-8110-X716 A290-8110-X717 24.06.230-242(NVT) Wire Guide Lower For big angle a -1B (Length: 19mm) 1900648 $390.00 WF123-15 0.400 Die Guide Upper A290-8037-X645 $695.00 WF124 1.0ø Jet Nozzle Lower a -A, B, C, ia, ib Series (AWF) A290-8110-Y774 $165.00 30x12 WF125-1 1.5 Jet Nozzle Upper a -A, B, C, ia, ib Series (AWF) A290-8102-Y756 $240.00 WF126-03 WF126-05 0.3mm 0.5mm Sub Die Guide Upper DWC-A,B,C,iA,iB (AWF) A290-8104-X620 A290-8102-X620 $250.00 WF-Y726 WIRE EDM Parts Wire EDM Spare Parts Sub Die Guide Upper A290-8110-Y726 or A290-8102-Y726 $235.00 Power Feed Contact for FANUC WF001 WF003 WF005 WF007 WF201 WF204 WF206 WF002 WF004 WF006 WF202 WF205 WF206S Size (mm) Description Position Machine Original P/No. WF001 25x9x10 Power Feed Lower H. L. E. M. K A97L-0001-0664 $44.00 Contact /25S1P WF002 16X6X6.3 Power Feed Contact WF003 8x4x10 Power Feed Contact WF004 16x6.3x6 Power Feed Contact WF005 2.8x7.7x23 Power Feed Contact WF006 4x12x23 Power Feed Contact WF006L 4x12x30 Power Feed Contact WF007 15x6x6 Power Feed Contact WF201-3 WF201-4 WF201-5 WF202-3 WF202-4 WF202-5 3ø 4ø 5.5ø 3ø 4ø 5.5ø Water Nozzle page 26 Lower O. P. Q. R. T. Mate. W A97L-0126-0001 /15S1P $11.00 Upper & K. N. M A290-8008-X107 $13.00 Lower Upper & Lower Upper & Lower Upper & Lower Upper & Lower AF, W-1, 2, 3, 4 (AWF) a-0a, 0B, 1A, 1B (Manual/ AWF) (polished) a-0c, 1C, ia, ib (Manual/ AWF, standard type) a-0c, 1C, ia, ib (Manual/ AWF, long type) A290-8032-Z882 $30.00 23.06.332(NVT) A290-8101-X750 $10.00 23.06.331(NVT) A290-8110-X750 $36.00 A290-8110-X750 $40.00 Upper W-0 A290-8048-X759 $40.00 Upper & Lower O. P. Q. R. W. T Series (Manual) Water Nozzle Lower O. P. Q. R. W. T. Mate Series (Manual) A290-8021-Y745 $11.00 A290-8021-Y705 (Y755) $11.00 WF204 5.5ø Water Nozzle Lower AF, W-1, 2, 3, 4 (AWF) A290-8037-X879 $10.00 WF205 5.5ø Water Nozzle Upper AF, W-1, 2, 3, 4 (AWF) A290-8032-Y611 $10.00 (Y745) 24.67.005(NVT) WF206 Nozzle Cap Upper & Lower O. P. Q. R. T. Mate W Series (for WF201/WF202, Brass) A290-8021-V722 $60.00 WF206S Nozzle Cap Upper & Lower O. P. Q. R. T. W Series (for WF201/WF202, Stainless) A290-8021-V722 $75.00

Flushing Cup for FANUC WF207 WF209 WF211 WF213 WF215 WF208 WF210 WF212 WF214 WF216 Size (mm) Wire EDM Spare Parts WIRE EDM Parts Description WF207 24x17x7 Water Nozzle WF208 26x17x7 Water Nozzle WF209-6 WF209-11 6.5ø 11ø Water Nozzle WF210 16ø Nozzle Holder WF211 6.5ø Water Nozzle WF212 6.5ø Water Nozzle WF213 6.5ø Water Nozzle WF214 4ø Water Nozzle WF215 4ø Water Nozzle WF216 12ø Water Nozzle WF217 12ø Water Nozzle WF218 6.5ø Water Nozzle Position Machine Original P/No. Lower W-0 (Manual) A290-8048-X771 24.67.007(NVT) Lower W-0 (Manaul) A290-8048-X772 24.67.008(NVT) Upper Lower Lower Upper Lower Upper Lower Upper Lower a-0a, 0B, 0C, ia, ib Series (Manual) a-0a, 0B, 0C, ia, ib Series (Manual) a-0a, 0B, 0C, ia, ib Series (Manual) a-1a, 1B, 1C, ia, ib Series (AWF) a-1a, 1B, 1C, ia, ib Series (AWF) a-1a, 1B, 1C, ia, ib Series (AWF) a-1a, 1B, 1C, ia, ib Series (AWF) a-1a, 1B, 1C, ia, ib Series (AWF) a-1a, 1B, 1C, ia, ib Series (AWF) $10.00 $10.00 A290-8111-X776 $14.00 (A290-8109-X776 for C) A290-8101-X776 A290-8101-X777 24.67.010(NVT) A290-8101-X755 $11.00 24.67.011(NVT) A290-8101-X756 $13.00 24.67.009(NVT) A290-8102-X751 $11.00 24.67.012(NVT) A290-8102-X771 $11.00 A290-8102-X752 (775) $14.00 A290-8102-X774 $14.00 A290-8102-X752 $13.00 A290-8102-X772 $13.00 Upper a-0c, 1C Series (Manual)wf A290-8109-X776 $12.00 WF275 Nozzle base Upper D=58mmx19mmL-5 screw holes A290-8110-Y723 $72.00 WF217 WF218 Connected Parts for FANUC Size (mm) Description Position Machine Original P/No. WF301 74.3x62.5x10 Isolator Plate Lower L, H (Manual) -ceramic- A290-8005-X722 $118.00 WF302 75x63x10 Isolator Plate Lower O, P, Q, R, T, Mate A290-8021-X709 $75.00 WF301 WF302 WF303 73x39x12 Isolator Plate Lower AF, W Series (AWT) -ceramic- A290-8032-X334 $70.00 WF304 51x33x29 Isolator Plate Upper O, P, Q, T, Mate, W A290-8021-X602 $72.00 WF305 40x40x34 Isolator Plate Upper a-a, B Series A290-8101-X509 $145.00 WF303 WF305-1 70x27x35 Isolator Plate Upper a-ib (AWF) A290-8110-X600 $159.00 WF304 WF305-2 70x27x48 Isolator Plate Upper a-b (AWF) $159.00 WF306 72øx15 Isolator Plate Lower a-a.b.c Series A290-8101-X312 $135.00 WF307 75x56x66 Isolator Plate Lower a-a, B Series A290-8101-X761 $210.00 WF305 WF305-1 WF307-1 76x66x56 Isolator Plate Lower a-c Series (F318) $222.00 WF307-2 81x66x56 Isolator Plate Lower a-c Series (F317) $222.00 WF400 12x6x4 Bearing SS1260(Z) for WF401 & WF402 $9.00 WF305-2 WF306 WF401 49x6.5x6 Wire Roller Lower E, K, O, P, Q, T Mate, W A290-8004-X713 $35.00 (plastic+brass) WF401S 49x6.5x6 Wire Roller Lower E, K, O, P, Q, T Mate, W A290-8004-X713-S $68.00 (plastic+stainless) WF307 WF307-1 WF401-1 L=26 Shaft Lower E, K, O, P, Q, T Mate, W (for A290-8003-X254 $15.00 WF401/WF401S) WF402 64x6.5x6 Wire Roller Lower L, H, M, W (plastic+brass) A290-8006-X707 $40.00 WF402S 64x6.5x6 Wire Roller Lower L, H, M, W (plastic+stainless) A290-8006-X707-S $68.00 WF307-2 WF400 WF403 40x40x25 Guide Base Lower a-a.b Series (stainless) A290-8103-X762 $148.00 WF404 59.5x49x20 Guide Block A Lower a-a Series (Manual/AWF) A290-8110-X770 $195.00 -stainless- WF401 WF401-1 WF404-1 38x22x12 Roller Lower a -A, B, C, ia, ib Series (Manual/ A290-8101-X765 $105.00 AWF) -ceramic- (A97L-0201-0369) WF401S SET WF403 WF408 WF409 WF402 WF404 WF409W WF406 40x20x18 Pinch Roller Lower a-a.b Series (Manual/AWF) -ceramic- WF407 40x20x19 Feed Roller Lower a-a.b Series (Manual/AWF) -ceramic- WF408 57x20x20 Feed Wire Guide Feed Section a -A, B, C Series (Manual/AWF) -plastic- EDM & ACCESSORIES A290-8101-Z382 $130.00 A97L-0201-0369 A290-8101-Z383 $140.00 A290-8102-X393 $122.00 WF409 138øx22 Brake Shoe Upper a-a.b.c.ia.ib Series (Manual/ A290-8101-X371 $132.00 AWF) WF409W Brake Shoe Upper O, P, Q, T, W A290-8039-V352 $129.00 WF-Y701 12 x 8mm Sapphire Roller A290-8021-Y701 $218.00 page 27

EDM & ACCESSORIES WIRE EDM Parts Wire EDM Spare Parts Connected Parts for FANUC WF411 WF413 WF502 WF503 WF721 WF410 WF412 WF414 WF502 WF503 Size (mm) Description Position Machine Original P/No. WF409W0 Brake Shoe Upper W0 Series (AWF) A290-8039-V352 $129.00 WF410 40x12x30 Pinch Roller Feed a-c (Manaul/AWF) -ceramic- A290-8110-X382 $190.00 Section WF411 40x12x30 Feed Roller Feed a-c (Manual/AWF) -ceramic- A290-8110-X383 $290.00 Section WF412 46x40x24.5 Guide Base Lower a-c.ia.ib Series (Manual/AWF) -stainless- A290-8110-Y762 $145.00 WF413 80øx22 Pinch Roller Feed Section WF414 80øx22 Feed Roller Feed Section WF501 =WM608V a-0ia, 1iA, 0iB, 1iB (Manual/ AWF) a-0ia, 1iA, 0iB, 1iB (Manual/ AWF) 22x8x7mm Bearing Lower a-a.b.c.ia.ib Series (Manual/ AWF) -for WF404-1 WF502 Bearing Lower a-a.b.c Series (Manual/AWF) -for WF406, WF410- A290-8112-X382 $580.00 A290-8112-X383 $320.00 A97L-0001-0670/ DRF2280H A97L-0201-0369/ 6001LLU $15.00 $10.00 WF503 Bearing Lower a-a.b Series (Manual/AWF) A97L-0201-0369/ 6203LLU $26.00 WF514 = WF721 Guide Block Upper A290-8110-X721 $365.00 WF516 Die Guide Base A290-8102-Y722 $155.00 A290-8110-X751 Electrod Pin A290-8110-X751 $15.00 Cap Screw WFVP V-Packing A97L-0001-0972 $88.00 WF721 Guide Block Upper A290-8110-X721 $365.00 For Wire Guide for BROTHER WB101 WB103 WB102 WB104 Size (mm) Description Position Machine Original P/No. WB101-08 WB101-10 WB101-12 0.205 0.255 0.305 Wire Guide Lower HS-300, 350, 500 632267020 632267025 632267030 $240.00 WB102-08 WB102-10 WB102-12 WB103-08 WB103-10 WB103-12 WB104-08 WB104-10 WB104-12 0.205 0.255 0.305 0.205 0.255 0.305 0.205 0.255 0.305 Wire Guide Upper HS-3100, 3600, HS-50A (AWT) Wire Guide Lower HS-3100, 3600, HS-50A (AWT) Wire Guide Upper & Lower HS-3100, 3600, HS-50A (STD, Manual) 659089-001 (632989000) 659090-001 (632990000) 659342-001 (632991000) 632992000 632993000 632994000 632986000 632987000 632988000 $250.00 $250.00 $250.00 Power Feed for BROTHER WB001 WB002 Size (mm) Description Position Machine Original P/No. WB001 14x14x9 Power Feed Contact Upper & Lower HS-300, 350 632276000 $55.00 WB002 4x10x19 Power Feed Contact Upper & Lower HS-3100, 3600, 5100 632904000 $40.00 Flushing Cup for BROTHER Size (mm) Description Position Machine Original P/No. WB201 4ø Water Nozzle Upper & Lower HS-300, 350 (Nozzle-100) 630877000 $5.00 WB202 4ø Water Nozzle Upper LS, HS-3100, 3600, HS-50A (AWT/ Manual, Nozzle 1506) 632902000 $28.00 WF201 WB202 WB203 WB203 4ø Water Nozzle Upper LS, HS-3100, 3600, HS-50A 632903000 $14.00 (AWT/1506) WB205 4ø Water Nozzle Lower 659398001 $28.00 page 28

Wire EDM Spare Parts WIRE EDM Parts EDM & ACCESSORIES Connected Parts for BROTHER For WF301 WF402 WF401C Size (mm) Description Position Machine Original P/No. WB301 57x46x9 Isolator Plate Lower HS-300 - ceramic- 632284000 $110.00 WB401C Guide Pulley HS-300 (Wire Guide Roller 300) -ceramic- 632269000 $72.00 WB402 Bearing HS-300 (SSLF 1260ZZ) -for WB401-533532001 24.09.700(NVT) $15.00 WB302 Arm Insulation Lower HS-50A 63293100 $155.00 Wire Guide for HITACHI Size (mm) Description Position Machine Original P/No. WH101-08 WH101-10 WH101-12 0.205 0.255 0.305 Wire Guide Upper Hi-Cut 203, 304, 345, 460, Q Series (Manual) Q1846 Q1846(C206) Q1846 $220.00 WH101 WH102 WH102-08 WH102-10 WH102-12 0.205 0.255 0.305 Wire Guide Lower Hi-Cut 203, 304, 345, 460, Q Series (Manual) Q1848 Q1848(C207) Q1848 $220.00 WH103 WH103-08 WH103-10 WH103-12 0.205 0.255 0.305 Wire Guide Upper & Lower H-Cut Series (Manual) $290.00 Power Feed Contact for HITACHI WH002 WH001 WH005 Size (mm) Description Position Machine Original P/No. WH001 10.7øx32 Power Feed Upper & Lower 203, 304, 345, 460, 580, 610 S1325(C202) $100.00 Contact WH002 11øx32 Power Feed Contact Upper & Lower H-CUT 203M, 304P, 406P, 508R, Q Series (AWT) (Q1825)Q6172 (C297) $90.00 WH005 9x18x18 Power Feed Contact WH005G 9x18x18 Power Feed Contact Upper & Lower Upper & Lower H-CUT 254Y, 355Y, 203R, 203F -standard type- H-CUT 254RS, 355RS (Tin Coating) -gold type- 43144(C850) $80.00 43033(C016) $88.00 Power Feed Contact for HITACHI WH201 WH203 WH202 WH204 Size (mm) Description Position Machine Original P/No. WH201 Water Nozzle HI-CUT 203, 304, 345, 460 $8.00 WH202 Water Nozzle HI-CUT 203, 304, 345, 460 $8.00 WH203-4 WH203-6 4ø 6ø Water Nozzle Lower HI-CUT 203M, Q Series -high speed- C261 C260 $20.00 WH204 Nozzle Support Lower HI-CUT 203M, Q Series (AWT) Q6205(C372) $73.00 (C327) WH205 Nozzle Support Upper HI-CUT 203M, Q Series (AWT) Q6201(C494) $73.00 WH205 For Wire Guide for CHARMILLES Size (mm) Description Position Machine Original P/No. WC101 WC101-08 WC101-10 WC101-12 0.2 0.25 0.3 Wire Guide Upper ROBOFIL 100, 200, 230, 290, 300, 310, 330, 400, 500, 510, 600, 1020, 2020, 2030, 4020, 4030, 6020, 6030 (WxH: 6x4mm) 200431112, 100432511, 200431512 02PG4433420, 02PG4433400 (430.585, 432.511), 02PG4448760 24.04.749(NVT) $160.00 WC102 WC102-08 WC102-10 WC102-12 0.2 0.25 0.3 Wire Guide Lower ROBOFIL 100, 200, 290, 300, 310, 400, 500, 510, 600, 1020, 2020, 2030, 4020, 4030, 6020, 6030 (WxH: 5x4mm) (Nirosta) 200431122, 100430586, 200432814, 02PG4433420, 02PG4433400 (430.586), 02PG4448760 24.04.768.780(NVT) $240.00 page 29

EDM & ACCESSORIES For Power Feed for CHARMILLES WIRE EDM Parts Wire EDM Spare Parts WC001 WC002 WC004 WC005-1 WC006 WC001G WC003 WC005 WC005 WC006-1 WC109 Size (mm) Description Position Machine Original P/No. WC001 12x12x5 Power Feed Upper & $27.00 Contact Lower WC001G 12x12x5 Power Feed Contact WC002 25x6x6.4 Power Feed Contact WC003 9.5x3.8x3 Power Feed Contact WC004 1.2x19x10 Centering Eye WC005 WC005-1 WC006 WC006-1 OD=50 ID=8 L=24 OD=50 ID=14 L=14 OD=50 ID=8 L=24 OD=50 OD=14 L=14 Upper & Lower ROBOFIL 100, 200, 230, 290, 300, 310, 330, 400, 500, 510, 600 X020, X030 (Tungsten Carbide) ROBOFIL 100, 200, 330, 400, 600 (w/o fast cut); 1000, 2000, 4000, 6000 (including micro cut) (WC001 w/ Tin Coated: same conductivity with Pure Tungsten) 100342166 02PO342166 (432.997) 23.06.110(NVT) 100342166 02PO342166 (432.997) 23.06.110(NVT) $41.00 Lower ROBOFIL 100, 200, 400, 600 806549 $46.00 Upper & EF-320, 330, 630, 930 106462 $27.00 Lower ROBOFIL 100, 200, 290, 300, 310, 400, 500, 510, 600, 1000, 2000, 4000, 6000 Pulley Lower ROBOFIL 290, 300, 310, 500, 510 (w/o groove) Pulley Lower ROBOFIL 290, 300, 310, 500, 510, 690 (w/o groove) Pulley Lower ROBOFIL 290, 300, 310, 500, 510 (w/ 4 grooves) Pulley Lower ROBOFIL 290, 300, 310, 500, 510, 690 Lower (w/ 2 grooves) 100441275 24.04.904(NVT) $40.00 630003359 (130003174) $115.00 449019 24.04.804(NVT) 130003359 $115.00 630003360 (130003173) $122.00 449329 24.04.806(NVT) 130003360 $128.00 WC109 Tungsten Carbide 135001012 $40.00 Flushing Cup for CHARMILLES Size (mm) Description Position Machine Original P/No. WC201 5.5ø Water Nozzle 446.021 $15.00 WC201 WC202 WC202 ID=6.8 OD=33.5 L=15.5 Water Nozzle Upper & Lower ROBOFIL 290, 300, 310, 500, 510, 1020, 2020, 2030, 4020, 4030, 6020, 6030 (United 3 parts to one nozzle: Cap with 7mm + Middle Cap + Base Nozzle) 432.351 104323510 24.63.002 (Novotec) $33.00 WC203 WC205 WC203 5.5ø Water Nozzle 448.473 $15.00 WC204 7ø Flat Nozzle 449.031 $15.00 WC205 6ø Water Nozzle Lower ROBOFIL 230, 330 200542646 $23.00 WC20X 6ø Ceramic nozzle RFI/100/200/400/600 200431788 $298.00 Connected Parts for CHARMILLES WC501 WC503 WC505 WC506L WC502 WC504 WC506 WC601 Size (mm) Description WC501 45ø Plastic Nut L=11 page 30 Position Machine Original P/No. Upper & Lower ROBOFIL 290, 300, 310, 500, 510, 1020, 2020, 2030, 4020, 4030, 6020, 6030 WC502 Spring Upper ROBOFIL 300, 310, 500, 510, 1020, 2020, 2030, 4020, 4030, 6020, 6030 WC503 WC504 WC505 WC506 WC506L 45ø L=19 OD=20 L=16 OD=20 L=24 Contact Brush Lower ROBOFIL 290, 300, 310, 500, 510, 2030SI 100443733 $15.00 100446201 $3.00 24.54.025(NVT) 100446687 $18.00 Plastic Nut Upper ROBOFIL 290, 300, 310, 500, 510 100447011 $23.00 Ground Lower ROBOFIL 290, 300, 310, 500, 510 100446736 $21.00 Cable Sleeve Lower ROBOFIL 290, 300, 310, 500, 510 100448679 $9.00 Sleeve Lower $12.00 WC601 30ø Knife Lower ROBOFIL 230, 330 100434447 $172.00 WC602 0.8ø Threading Nozzle Upper ROBOFIL 100, 200, 300, 310, 400, 500, 510, 600, 1020, 2020, 2030, 4020, 4030, 6020, 6030 (Ceramic) 100431958 $125.00

Connected Parts for CHARMILLES WC602-2 Size (mm) Description WC602-2 1.8ø Threading Nozzle WC604 WC605 WC604 WC605 WC605-1 13 Thick=17 L=24 WC605-1 WC605-2 WC605-2 15 Thick=15 L=24 WC608S OD=22 ID=8 Thick=7 WC608S WC608RS WC608RS OD=22 ID=8 Thick=7 MISC. Parts for CHARMILLES For Wire Guide for JAPAX WJ102 WC602 WJ101 Driving Roller Contact Holder Contact Holder Contact Holder Wire EDM Spare Parts WIRE EDM Parts Position Machine Original P/No. Upper ROBOFIL 100, 200, 300, 310, 330, 400, 500, 510, 600, 1020, 2020, 2030, 4020, 4030, 6020, 6030 (Ceramic) 100431787 $125.00 Lower ROBOFIL 230, 330 100542999 $80.00 Lower ROBOFIL 230, 330 200434002 $57.00 Upper ROBOFIL 230, 290, 300, 310, 330, 500, 510 100444750 $60.00 Lower ROBOFIL 1020, 2020, 4020, 6020 100444728 $60.00 Bearing stainless steel w/o rubber seal SS608 ZZ $10.00 Bearing stainless steel w/ rubber seal SS608 2RS $10.00 Size (mm) Description Position Machine Original P/No. WJ101-08 WJ101-10 0.205 0.255 Wire Guide Upper EXP.LUB. LS-S. LS-X. LV. LUX. SSZ1106 SSZ1107 $230.00 WJ101-12 0.305 LXE. LXR. LDM. SSZ1108 ELVY (Manual/ WJ102-08 WJ102-10 WJ102-12 WJ103-08 WJ103-10 WJ103-12 WJ104A WJ103 WJ104A-08 WJ104A-10 WJ104A-12 WJ104B-08 WJ104B-10 WJ104B-12 WJ108 WJ104B WJ108-08 WJ108-10 WJ108-12 Power Feed Contact for JAPAX 0.205 0.255 0.305 0.205 0.255 0.305 0.205 0.255 0.305 0.205 0.255 0.305 0.205 0.255 0.305 AF) Wire Guide Lower EXP.LUB. LS-S. LS-X. LV. LUX. LXE. LXR. LDM. ELVY (Manual/ AF) Wire Guide Upper LS-A, LU3B (Manual) Wire Guide Upper & Lower LS-A (Manual, Float Type) L=44mm Wire Guide Lower LS-A (Manual) L=28mm EDM & ACCESSORIES Description Position Machine Original P/No. WC 104447530 Current Transmitter Upper 104447530 $85.00 WC433310 Ground Cable for Charmilles Lower 433310 $115.00 EDM WC432528 Machining Cable Lower for Charmilles EDM Lower 432528 $125.00 SSZ2106 SSZ2107 SSZ2108 SSZ1006 SSZ1007 SSZ1008 SSZ3006 SSZ3007 SSZ3008 SSZ2006 SSZ2007 SSZ2008 $230.00 $230.00 $230.00 $230.00 Wire Guide Upper & Lower AMADA Japax SSZ0010 $300.00 WJ001 WJ002 Size (mm) Description Position Machine Original P/No. WJ001 10x4x7 Power Feed Upper & LS-A, L, LXR (AF3) MGK0001 $11.00 Contact Lower WJ002 10.5x10.5x7 Power Feed Upper & LS-A (Float Type), LS-S, LS-X, MGS1122 $28.00 Contact Lower LU3B, LUX-3, LV-3, LX, LX-S, LXE, LXRLDM, ELVY, EXP20, LDM, FA, FAS WJ003 20x20x7 Power Feed Contact Upper & Lower LDM (AF-4), LXR-S, EXP, LUX, LXR, LV, LXE AF4G003 $62.00 WJ004 12X6X6 Power Feed Contact Upper LS-A, LS-S, LS-X, LU3B, LUX-3, LV- 3, LXE, LXR, LDM, ELVY, LDM-S MGK0101 $26.00 WJ003 WJ004 Connected Parts for JAPAX WJ301-1 WJ302 Size (mm) Description Position Machine Original P/No. WJ301-1 100x24x20 Urethane Roller 30RL-B-103 (bearing not included) $150.00 -steel- WJ302 Flange Lower 80AR-LDM-100 $215.00 page 31

EDM & ACCESSORIES Flushing Cup for JAPAX WIRE EDM Parts Wire EDM Spare Parts WJ201 WJ203 WJ206 WJ208 WJ210 WJ212 WJ202 WJ205 WJ207 WJ209 WJ211 WJ214 WJ2421 Size (mm) Description Position Machine Original P/No. WJ201 6ø Water Nozzle Lower LS-S, LS-X, LU, LD MGS113101 $15.00 WJ202 6ø Water Nozzle Lower LS-S, LU, LD MGS1121 $12.00 WJ203 6ø Water Nozzle Lower LS, LU, LD 111G054 $8.00 WJ205-4 WJ205-5 WJ205-7 WJ206-3 WJ206-4 WJ206-6 WJ206-9 4ø 5ø 7ø 3ø 4ø 6ø 9ø Water Nozzle Lower LUX-3 (New Type), LV-3, LXE, EXP, LXR (Manaul), LU, LD Water Nozzle Upper LUX-3 (New Type), LV-3, LXE, LDM, LXR (Manual/AF), LS-A MGX5003 $9.00 MGX5013 $9.00 WJ207 6ø Water Nozzle Upper LXE (Manual, Old Type), LS, LD, MGX5006-1 $13.00 LU, LV WJ208 4ø Water Nozzle Lower LS-A, LS, LD, LU, LV (Long Type) MGX5014 $14.00 WJ209 8ø Water Nozzle Lower LS, LD, LU, LV $14.00 WJ210 8ø Water Nozzle Lower LS-A, LS, LD, LU, LV (Long Nozzle) $14.00 L=51x31ømm WJ211 4ø Water Nozzle Lower AF-4 A4G0001 $9.00 WJ212 6ø Water Nozzle Lower LDM (AF-4) L=13.5x32mm A4G0002 $9.00 WJ213-4 WJ213-6 WJ214 4ø 6ø Water Nozzle Lower LUX, LDM LDM2306 $6.00 Adjustment Nut Lower LUX, LDM (Long Type) L=10mm $14.00 WJ2421 WJ2421 WJ2421 WJ2421 LDM Upper LDM2010 $27.00 Filter for Wire EDM/ MITSUBISHI NW-12N NW-20 Machine Specifications IN/EX Fit to s (QxQIxH) NW-12A MITSUBISHI 300x29x500mm IN/EX DWC-70, 90, 110, 200 $99.00 N Series NW-12AS MITSUBISHI 300x29x250mm IN/EX DWC-70, 90, 110, 200 $52.00 N Series NW-12N MITSUBISHI 300x29x500mm IN DWC-F, PF, G, PG, H, U, C, HA, PH, HP, HS, $85.00 H31.967/20 PA, P, SX Series H31.967/20 MANN Filter $95.00 NW-20 MITSUBISHI 300x58x500mm IN/EX w/ DWC90B, DWC90SB, DWC110A, DWC- $85.00 nipple 110SA, DWC-90, 110, Z, SZ, SZP Series H31.1033/20 MANN Filter $95.00 NW-21 MITSUBISHI 340x46x300mm IN/EX w/ DWC-FX-10FX-2K, CX Series $85.00 nipple H34.1380 MANN Filter $95.00 H31.1033/20 NW-21 Filter for Wire EDM/ SODICK NW-17 NW-18N NW-18H NW-11 H34.1070/20 Machine Specifications (QxQIxH) NW-18H SODICK 340x46x450mm Depth: 130mm page 32 IN/EX Fit to s IN A(350, 500, 600, 750), A350SSW A(300, 350, 500, 750, 1000)W A500MARK II(20, 21), A500P, BF(250, 275), BF280L, A350SS, A(320, 350)D, A350S $65.00 H34.1158/20 MANN Filter $85.00 NW-18N SODICK 340x46x300mm IN/EX A(300, 350, 350W, 500, 500W, 600, 600W, 750, 750W, 1000W, 500P, 500WP, 600P, 600WP) $85.00 H34.1070/20 MANN Filter $90.00 NW-17 SODICK 260x46x280mm EX 87 /7~... A(350, 500), EPOC(300, 500, 600, 800, 1100), A350S, A350SSW, AP(150, 200, 300, 330, 450), A(350, 500)W, 87/7~ SCG-150, AW(330, 453)W $42.00 H26.644/20 MANN Filter $55.00 NW-11 SODICK 150x33x345mm 150x33x350mm $17.00 EX GOW(3, 5), EPOC3WS, C(2, 3, 4, 5)F, AP(150, 300), G3A, EPOC(3, 5, 40)W ~ 87/6..., C(2, 3, 4, 5)P, EPOC(300, 500, 600, 800), ~ 87/6 SCG-150... AW(330, 453), AW(330, 453, 654)W NW-01 SODICK 150x72x450mm EX AP $34.00 NW-25N SODICK 340x46x450mm Inside In/ A320D & A530D... $85.00 Outside out H34.1158/20

Filter for Wire EDM/ FANUC, ALPHA Wire EDM Spare Parts WIRE EDM Parts EDM & ACCESSORIES NW-18N NW-18H H34.1070/20 Machine Specifications (QxQIxH) NW-18H FANUC, ALPHA 340x46x450mm Depth: 130mm IN/EX Fit to s IN O, P, Q, R, S, V, T CUTMATE TAPECUT W(0, 1, 2, 3, 4), FW340 ALPHA0(A, B, C), ALPHA1(A, B, C) $65.00 H34.1158/20 MANN+HUMMEL $85.00 NW-18N FANUC, ALPHA 340x46x300mm IN/EX O, P, Q, R, S, V, T $85.00 MATE: W(0, 1, 2, 3, 4), ALPHA0(A, B, C), ALPHA1(A, B, C) H34.1070/20 MANN+HUMMEL NW-21A FANUC 340x46x300mm IN/EX w/ nipple New 180W $117.00 H34.1158/20 Filter for Wire EDM/ BROTHER NW-12N H31.967/20 Machine Specifications IN/EX Fit to s (QxQIxH) NW-12N BROTHER 300x29x500mm IN HS(300, 350), HSC300 $85.00 H31.967/20 MANN+HUMMEL $95.00 Filter for Wire EDM/ HITACHI NW-20 H31.1033/20 Machine Specifications IN/EX Fit to s (QxQIxH) NW-20 HITACHI 300x58x500mm IN/EX w/ nipple H-CUT(3, 4, 5, 6, 8, 203)Q, H-CUT3HP $85.00 H31.1033/20 MANN+HUMMEL $95.00 NW-15 HITACHI 300x46x340mm IN H-CUT(304, 406)N, H-CUT(304, 406)P, $65.00 H-CUT(304, 406)S, H-CUT304HP, H- CUT304NP, H-CUT406B, H-CUT406AWF NW-14 HITACHI 260x37x340mm EX H-CUT 304 $72.00 Filter for Wire EDM/ CHARMILLES, AGIE, AMADA NW-19 Machine Specifications IN/EX Fit to s (QxQIxH) NW-19 CHARMILLES 150x33x345mm EX ROBOFIL Series AM370 $19.00 AGIE 150x33x375mm AC200, AGICUT(100, 200, 300), AGICUT(100, 200, 300)D DEM(215, 250, 315, 700) AMADA WP(AW1, AW2, AW3) Filter for Wire EDM/ JAPAX NW-17 H26.644/20 NW-11 Machine Specifications (QxQIxH) IN/ EX Fit to s NW-17 JAPAX 260x46x280mm EX D100M DC500NC, DH150PSR, DH300B, DP40, DX85NC, DX80, JL85, LH3A $42.00 H26.644/20 MANN+HUMMEL $60.00 NW-11 JAPAX 150x33x345mm 150x33x350mm EX AT50, ELVY, EXP, EXP20, L300A, LDM35, LDM50, LDMFA, LF3A, LH3A, LL13B, LP3A, LT3A, LPA3A, LSP3A, LS(250, 350, 500, 800, 1000)/A, S, X, LX600M/4, LXEFA, LXE(35, 50) $17.00 Filter for Wire EDM/ MAKINO NW-17 Machine Specifications IN/EX Fit to s (QxQIxH) NW-13 MAKINO 190x110x550mm EX EC-3025, 3040, 7050(old) Call NW-17 MAKINO 260x46x280mm EX EC-3025, 3040, 3141, 7050, 3141S, 3046N $42.00 H26.644/20 MANN+HUMMEL $60.0 H26.644/20 page 33

EDM & ACCESSORIES Filter for Wire EDM/ SEIBU Machine Specifications (QxQIxH) IN/EX Fit to s NW-20 NW-11 NW-20 SEIBU 300x58x500mm IN/EX w/ EW-300K1, EWA(5, 7)S, EWA-C3 $85.00 nipple H31.1033/20 MANN Filter $95.00 H31.1033/20 NW-11 SEIBU 150x33x345mm 150x33x350mm EX EW(25, 30, 35, 250, 300, 400,450, 600, 700, 1000), EW25C, EW300P, EW(300, 450, 600, 700, 1000)K, EW600F2, EW(450, 700)K1, EW(30, 35)N, EWP300A/B $17.00 Filter for Wire EDM/ WASHINO Machine Specifications (QxQIxH) IN/EX Fit to s NW-24 WASHINO 260x50x400mm EX $50.00 MANN FILTER EDM FILTERS eline M+H Dimension in mm Application Compare to d1 x d2 x h d1=od, d2=id, h=ht H34 1158/8 340 x 45.5 x 450 OE Filter Charmilles Robofil 240/440 Charmilles-501221 & 501223 $98.35 H34 2240 340 x - x 450 OE Filter Charmilles Unique Long Life Filter, $132.60 New Generation System NW-20 Will fit Mits platforms H34 1780/2 340 x - x 450 Multi Mach. Platforms Char. Mitts Unique Long Life Filter, NW-20 Will fit Mits platforms $109.23 H31 967/1 302 x 29 x 507 Mitts DWC, F, G, H, C Brother Machines NW-12N A150 or 1220B-3 $73.10 H31 1680/1 302 x - x 507 Mitts, SB, SA, SZ NW-20 $109.40 A244 or 12205QC H34 1280/4 340 x - x 328 Multi Mach. Platforms Fanuc ib ic, char. Mitts., makino Unique Long Life Filter NW-21, NW-21A $93.50 H34 1158/5 340 x 45.5 x 450 Sodic, Fanuc/ Alpha NW-18H, 1318 B3 and B5 $98.35 Sodick HF-25, HF-25A, KH-25A H15 190/16 150 x 32 x 375 OE Charmilles/ Agie NW-19, NW-11 Japax $19.81 * Use on Wire or Sinker DF100 df200 614-125 H15 475/1 * 150 x 32 x 375 OE Agie Sinker Use on Wire or Sinker Premium OE Filter DF100 DF200 614-125 $25.50 eline * 150 x 32 x 375 Charmilles/ Agie Use on Wire or Sinker Starting Point DF100 DF200 614-125 $18.11 GROMAX Special stainless Wire Cut Vise DV053G5 DV150G5 DV520F3-1 DV524C05 Dimensions/Description Max. Fit to Machine (WxLxThickness+Height) Load DV053G3 2 x4.8 x0.6 +0.12 for clamping and leveling 3.3 Lbs. All brands $138.00 DV053G5 2 x4.8 x0.6 +0.20 for clamping and leveling 3.3 Lbs. All brands $138.00 DV150G3 6 x4.8 x0.6 +0.12 two slots for clamping and leveling 8.8 Lbs. All brands $336.00 DV150G5 6 x4.8 x0.6 +0.20 two slots for clamping and leveling 8.8 Lbs. All brands $336.00 DV500G3-1 20 x3 x0.8 +0.12 (1.32 /1.52 /1.72 ) 33 Lbs. Mitsubishi, Seibu $1,074.00 DV500G51-1 20 x3 x0.8 +0.20 (1.32 /1.52 /1.72 ) 33 Lbs. Mitsubishi, Seibu $1,074.00 DV500F3-1 20 x3 x0.8 +0.12 (13 /17 ) 33 Lbs. Fanuc $1,074.00 DV500F51-1 20 x3 x0.8 +0.20 (13 /17 ) 33 Lbs. Fanuc $1,074.00 DV520F3-1 20.8 (18 )x3 x0.8 +0.12 33 Lbs. Fanuc alpha 1C $1,074.00 DV524C05 20.8 (18 )x3 x1.0 +0.12 33 Lbs. Fanuc $1,113.60 DV520F5-1 20.8 (18 )x3 x0.8 +0.20 increase height on both ends 33 Lbs. Fanuc alpha 1C $1,074.00 DVSX1G35 18.2 x3.7 x0.6 +0.12 +0.20 increase height on both ends 33 Lbs. Mitsubishi, Seibu $1,074.00 DV720K5-1 28.8 x3.2 x1 +0.20 44 Lbs. Sodick AQ535 $1,860.00 GROMAX Double-sided Clamping Beam(Ruler) Set of 2 pieces Item No. Dimensions/Description Max. Machine (WxLxThickness+Height) Load Set of 2pcs WGC-901-1 2.95 x15.4 x0.7 +0.2 75x390x18+5mm 44.4Lbs. 20Kg Any Machine $3,000.00 WGC-901-2 3.3 x20 x0.7 +0.2 85x510x18+5mm 48.9Lbs. 22Kg Any Machine $3,000.00 WGC-901-3 3.74 x25.98 x0.79 +0.2 95x660x20+5mm 77.8Lbs. 35Kg Any Machine $3,625.00 WGC-901-4 3.74 x27.56 x0.79 +0.2 95x700x20+5mm 93.3Lbs. 42Kg Any Machine $3,625.00 WGC-901-5 3.74 x29.13 x0.79 +0.2 95x740x20+5mm 106.7Lbs. 48Kg Any Machine $3,950.00 WGC-901-6 3.74 x34.64 x0.94 +0.2 95x880x24+5mm 120Lbs. 54Kg Any Machine $6,675.00 WGC-901-7 3.94 x37.8 x1.02 +0.2 100x960x26+5mm 128.9Lbs. 58Kg Any Machine $7,375.00 Application Wire EDM page 34

GROMAX Special stainless Wire Cut Vise Item No. WZC-1550 $2,300.00 WZC-2250 $2,500.00 WZC-3550 $2,700.00 WZC-1550 Shown Item No. Dimensions (WxLxTh.) Max. Load Square Workpiece WZC-1550 5.3 x5.9 x0.59 8.9Lbs. 70mm 135x150x15mm 4Kg WZC-2250 5.3 x5.9 x0.87 13.3Lbs. 70mm 135x150x22mm 6Kg WZC-3550 5.3 x5.9 x1.38 17.8Lbs. 70mm 135x150x35mm 8Kg Application Wire EDM GROMAX WTC-45-P WTC-145 WTC-170 WTC-265 WTC-60 WTC-220 Stainless Double Sided Clamping WTC-45 WTC-065 WTC-260 WTC-50 WTC-120 STAINLESS SIDED CLAMPING FOR WIRE EDM Item No. Dimensions/Description Max. (WxLxTh.+Height) Load WTC-45-P 2.36 x8.66 x0.79 +0.2 17.78Lbs $1462.00 Set of 2 60x220x20+5mm 8Kg WTC-45 2.36 x8.66 x0.79 +0.2 17.78Lbs $1462.00 set of 2 60x220x20+5mm 8Kg WTC-145 3.94 x8.66 x0.79 +0.2 26.67Lbs $2360.00 set of 2 100x220x20+5mm 12Kg WTC-065 2.56 x4.72 x0.59 +0.2 17.8Lbs $405.00 1 piece 65x120x15+5mm 8Kg WTC-170 2.56 x6.7 x0.59 +0.2 17.8Lbs $585.00 1 piece 65x170x15+5mm 8Kg WTC-260 2.36 x8.66 x0.87 +0.2 26.7Lbs $607.00 1 piece 60x220x22+5mm 12Kg WTC-265 2.56 x8.66 x0.59 +0.2 22.2Lbs $607.00 set of 4 65x220x15mm+5mm 10Kg WTC-50 1.97 x4.72 x0.59 +0.2 17.78Lbs $237.00 1 piece 50x120x15+5mm 8Kg WTC-60 2.36 x4.72 x0.59 +0.2 17.78Lbs $262.00 1 piece 60x120x15+5mm 8Kg WTC-120 4.72 x5.9 x0.59 +0.2 33.3Lbs $560.00 1 piece 120x150x15+5mm 15Kg WTC-220 4.72 x8.66 x0.59 +0.2 44.4Lbs $922.00 1 piece 120x220x15+5mm 20Kg Machine Any Machine GROMAX Special stainless Wire Cut Jig Holder DV41D Dimensions/ Description (WxLxThickness) 55x23x12mm flat top 40x23x10mm flat/small 70x23x12mm sharp top 70x23x8mm thin sharp/thin 95x23x12mm Long Type page 35 Fit to Machine DVS31 Fanuc, $32.00 Seibu DVS32 Fanuc, $32.00 Seibu DV41D Mitsubishi, $22.00 Sodick DV42D Mitsubishi, $22.00 Sodick DV43D Mitsubishi, $30.00 Sodick DVSDK1 80x24x12mm Sodick $42.00 DU41 70x20x10mm M6 Charmilles $40.00 DU42 70x20x8mm M6 Charmilles $40.00 DU43 D 95x20x10mm Long Type M6 GROMAX Stainless Wire Cut Vise 2 & 4 (WST50, WST100) vises shown D DVSDK1 Charmilles $46.00 Made of stainless steel to resist erosion One piece body construction Hardness: HRC 55 Parallelism & squareness within 0.0002 Precision ground and hardened throughout 1.14 DV43D 6 vise (WST150) shown Stainless Vise DV42D DVS32 0.35 Whole pattern for 4 vises 8 vise (WST200) shown WST50 WST100 WST150 WST200 (2 ) (4 ) (6 ) (8 ) Length(inch) 4.70 6.67 8.75 11.80 Width(inch) 1.10 1.17 1.25 1.44 Jaw Opening 2.00 4.00 6.00 8.00 Jaw Depth 0.97 0.97 1.40 1.59 D 2 3.35 4.15 4.25 Height 3.32 3.35 3.95 4.34 Weight(lbs) 4.0 6.0 8.0 12.0 $340.00 $540.00 $720.00 $1100.00 For horizontal mounting of square workpiece 292.3k 292.6HPK Clamping range 0-4 0-6 Max. wt 15.4 lbs 33 lbs of workpiece Weight 3 Lbs 6 Lbs $3,795.00 $5,275.00 EDM & ACCESSORIES The Ultimate Work Holding System Wire EDM Tooling Package 3R-282 Magnum levelling adaptor for mounting a supervise. Just 2 set screws gives extremely quick setting. * Recommand weight of workpiece: 33 lbs 3R-292.66HP $3,560.00 (Fitted on 3R-282) Holer magnuom, holds up to 7 3/4 workpieces * Max. weight of workpiece: 33 lbs 3R-239.1K Ruler Vise $2,900.00 Movable jaws of supervice design provide a wide clamping range for squareworkpieces. * Max. weight of workpiece with one vise: 33 lbs * Max. weight of workpiece with two vise: 440 lbs Wire EDM Tooling Package Have problem locating and holding small workpieces in your wire EDM machine? Starter Kit 3R-249.1 contains: (A)3R-200.1J-U $950.00 A universal reference element 140 mm long with oval holes, for all machines that have M8 holes spaced at 50 mm in the machine table, 30 to 40 mm from table edge (B)3R-272HP $2,755.00 A leveling adaptor providing presetting in three axes outside the machine. And this with a precision that is within thousandths of a millimeter. (C)3R-293.33 $3,900.00 A universal holder for rapid and exact clamping of round workpiece 8-100 mm dia or square workpieces up to 100 mm. (package) 3R-249.1HP CALL

EDM & ACCESSORIES GROMAX Stainless Vise 1 & 3 VBST30 VIRGIN RESIN REGENERATE RESIN resins for water and wastewater treatment, including deionization / Virgin Resin RESIN301 5 lbs $46.00 RESIN302 10 lbs $76.00 RESIN305 40.6lbs $310.00 RESINV010 1C.F. $230.00 / Regenerate Resin RESINR010 1C.F. $88.00 EDM Wire Neo Power Magnets for Wire EDM Extremely powerful and compact Made of Neody mium-iron-boron Rare Earth magnets Strong enough to hold very large core pieces during EDM operation 3/4 diameter MODEL (per box) NPM6(box of 6) $134.00 H 2 O PLUS BLUE Wire EDM Corrosion Inhibitor & Cleaner For use in Wire EDM machines to prevent undesirable corrosion of work pieces and to continuously help keep the machine clean. Once added to the system, H 2 O Plus Blue allows more dirt and waste products to be captured by the filtration system, this helps keep the entire machine cleaner. Recommended for new machine installations where tank walls, fi lters, hoses, etc, are free of contamination. A concentration ratio of 0.5 to 100 guarantees optimal rust proofi ng and cleaning. Description CIC1 1 Gal. Container $200.00 CIC5 5 Gal. Container $830.00 FAST CUTTING / COMPETITIVE PRICE No Acid-Corrosion and No Damage to Resins: The special treatment avoids acid-corrosion on machine and work piece. Filtered water and ph will not be damaged. Thus lengthens the life span of the ion resins. High Surface Quality: The special treatment makes wire surface smooth, free from dirt, rust and grease that causes ineffi cient electric discharge. Standard Weight Control: By perfect control in process, we obtain the standard weight per coil that enables us to maintain the processing time stability and the drawing accuracy, this ensures the stable quality of wire. No Weldment: The rough surface caused by welding could affect the quality and accuracy of performance. The welded wire tends to break which results in lost time to re-thread. High-Dimensional Precision: Due to the control system of diamond dies and lubricant, wire diameter tolerance and roundness tolerance are both limited to 1/μm. No scratch, cracking, twisting and deformation can be found on our wire. Outstanding Straightness: The outstanding straightness and quality of NEW Gromax Zinc Coated wire ensures smooth automatic threading. Specifi cations: Zinc Coated Wire: CU 65% / ZN 35% Brass Wire, Zinc Enriched: CU 60% / ZN 40% NATURE OF WORK SOFT WIRE MEDIUM WIRE HARD WIRE Straight 1 pass cutting x good excellent WIRE DIAMETER DIAMETER BREAKING TENSILE ELONGATION Cutting TYPE TOLERANCE LOAD (N/MM²) STRENGTH % 2 pass cutting (rough and x x excellent finish) Hard 0.10mm (0.004 ) ±0.001mm 1.7 Lbs. 980> 0.4< 3 pass cutting (rough, x x excellent 0.15mm (0.006 ) (0.00004 ) 3.8 Lbs. (142,137 psi) finish and re-finish 0.20mm (0.008 ) 6.9 Lbs. Relief 1 pass cutting (relief x good excellent 0.25mm (0.010 ) 10.8 Lbs. Cutting under 10 ) 0.30mm (0.012 ) 15.6 Lbs. 1 pass cutting (relief good excellent x 0.33mm (0.013 ) 18.8 Lbs. 10-20 ) Soft 0.20mm (0.008 ) ±0.001mm 3.1 Lbs. 441> 15< 1 pass cutting (relief over 20 ) VST10 This STAINLESS VISE is suitable for workholding under water. Ideal for wire-cut & drill type EDM where tap water is used as dielectric fluid. Squareness and parallelism within 0.0002. Material: 440 stainless steel. Hardness: HRC 56 Length Width Jaw Jaw Opening Height VST10 2-9/16 1 0.812 3/8 $68.00 VBST20 5-1/2 1.89 2.95 1 $410.00 VBST30 7-1/16 2-7/8 3.56 1-3/8 $440.00 excellent good x GROMAX Stainless Vise Good for Small Hole EDM!! Length: 6.3 Width: 2.75 Jaw Opening: 3.15 VST25 $385.00 Jaw Height: 1.18 Weight: 10 Lbs VST30 $570.00 Opening:3.74 Made of stainless steel, hardened and precision ground HRC 56 squareness and parallelism within 0.0002" Good for operation under water GROMAX Adjustable Precision Vise for EDM Top View Parallelism is within 0.00012 /3.94 (0.003mm/ 100mm); squareness is within 0.0002 /3.94 (0.005mm/100mm). Harden treatment is up to HRC 50 ~55. This vise can be adjusted up and down, left and right, forth and back to make parallelism. Strong clamping can stand high water pressure. Description PV320 Stainless Vise $3300.00 0.25mm (0.010 ) (0.00004 ) 4.9 Lbs. (63,961 psi) 0.30mm (0.012 ) 7.0 Lbs. x: not recommended page 36

EDM Wire EDM & ACCESSORIES Spool Dimensions: Spool Type Lbs. Kg. A B C D P-1R 3.3 1.5 3.94 3.54 0.79 1.97 P-3R 6.6 3 5.12 4.33 0.79 3.15 P-5R 11 5 6.30 4.49 0.79 3.54 P-5 13.2 6 6.30 4.49 0.79 3.54 P-10 22 10 7.87 5.27 1.18 3.94 P-15 44 20 9.84 5.51 1.18 3.94 DIN-125 7.7 3.5 4.92 4.92 0.79 3.15 DIN-160 17.6 8 6.30 6.30 0.87 3.94 DIN-200 35.2 16 7.87 7.87 0.87 4.92 Wire for Japanese s (P Series) ZINC Coated Hard Wire Brass Hard Wire ZINC Coated Soft Wire Brass Soft Wire Spool Type Dia. /Lbs. /Lbs. /Lbs. /Lbs. Quantity of Order (Spool) 30 and up 1~29 30 and up 1~29 30 and up 1~29 30 and up 1~29 P-1R 0.10mm (0.004 ) ZP0110 BP0110 BP0110S (3.3 Lbs./1.5 Kg) 0.15mm (0.006 ) ZP0115 BP0115 BP0115 S Quantity of Order (Spool) 30 and up 1~29 30 and up 1~29 30 and up 1~29 30 and up 1~29 P-3R 0.10mm (0.004 ) ZP0310 BP0310 BP0310S (6.6 Lbs./3 Kg) 0.15mm (0.006 ) ZP0315 BP0315 BP0315S 0.20mm (0.008 ) ZP0320 BP0320 ZP0320S BP0320S 0.25mm (0.010 ) ZP0325 BP0325 ZP0325S BP0325S Quantity of Order (Spool) 30 and up 1~29 30 and up 1~29 30 and up 1~29 30 and up 1~29 P-5R 0.20mm (0.008 ) ZP0520 BP0520 ZP0520S BP0520S (11 Lbs./5 Kg) 0.25mm (0.010 ) ZP0525 BP0525 ZP0525S BP0525S 0.30mm (0.012 ) ZP0530 BP0530 ZP0530S BP0530S 0.33mm (0.013 ) ZP0533 BP0533 ZP0533S BP0533S Quantity of Order (Spool) 30 and up 1~29 30 and up 1~29 20 and up 1~19 30 and up 1~29 P-5 0.20mm (0.008 ) ZP05206 BP05206 ZP05206S BP05206S (13.2 Lbs./6 Kg) 0.25mm (0.010 ) ZP05256 BP05256 ZP05256S BP05256S 0.30mm (0.012 ) ZP05306 BP05306 ZP05306S BP05306S 0.33mm (0.013 ) ZP05336 BP05336 ZP05336S BP05336S Quantity of Order (Spool) 20 and up 1~19 20 and up 1~19 10 and up 1~9 20 and up 1~19 P-10 0.20mm (0.008 ) ZP1020 BP1020 ZP1020S BP1020S (22 Lbs./10 Kg) 0.25mm (0.010 ) ZP1025 BP1025 ZP1025S BP1025S 0.30mm (0.012 ) ZP1030 BP1030 ZP1030S BP1030S 0.33mm (0.013 ) ZP1033 BP1033 ZP1033S BP1033S Quantity of Order (Spool) 10 and up 1~9 10 and up 1~9 10 and up 1~9 10 and up 1~9 P-15 0.20mm (0.008 ) ZP1520 BP1520 ZP1520S BP1520S (44 Lbs./20 Kg) 0.25mm (0.010 ) ZP1525 BP1525 ZP1525S BP1525S 0.30mm (0.012 ) ZP1530 BP1530 ZP1530S BP1530S 0.33mm (0.013 ) ZP1533 BP1533 ZP1533S BP1533S Wire for European s (DIN Series) A B C Approximate Length of Wire Per Spool in Yards: Wire Dia. P-3R P-5R DIN-160 P-10R DIN-200 P-15R 0.006 / 22,000 36,500 NA NA NA NA 0.15mm 0.008 / 12,500 20,800 25,000 41,600 62,400 83,200 0.20mm 0.010 / 7,900 13,100 15,800 26,200 39,300 52,400 0.25mm 0.012 / 0.30mm 5,400 9,000 10,800 18,000 27,000 36,000 s may be changed from London Metal Exchange without notice. ZINC Coated Hard Wire BRASS Hard Wire ZINC Coated Soft Wire BRASS Soft Wire Spool Type Dia. /Lbs. /Lbs. /Lbs. /Lbs. Quantity of Order (Spool) 30 and up 1~29 30 and up 1~29 30 and up 1~29 30 and up 1~29 DIN125 0.10mm (0.004 ) ZD1210 BD1210 ZD1210S BD1210S (7.7 Lbs./3.5 Kg) 0.15mm (0.006 ) ZD1215 BD1215 ZD1215S BD1215S 0.20mm (0.008 ) ZD1220 BD1220 ZD1220S BD1220S 0.25mm (0.010 ) ZD1225 BD1225 ZD1225S BD1225S Quantity of Order (Spool) 30 and up 1~29 30 and up 1~29 30 and up 1~29 30 and up 1~29 DIN160 0.20mm (0.008 ) ZD1620 BD1620 ZD1620S BD1620S (17.6 Lbs./8 Kg) 0.25mm (0.010 ) ZD1625 BD1625 ZD1625S BD1625S 0.30mm (0.012 ) ZD1630 BD1630 ZD1630S BD1630S 0.33mm (0.013 ) ZD1633 BD1633 ZD1633S BD1633S Quantity of Order (Spool) 20 and up 1~19 20 and up 1~19 20 and up 1~19 20 and up 1~19 DIN200 0.20mm (0.008 ) ZD2020 BD2020 ZD2020S BD2020S (35.2 Lbs./16 Kg) 0.25mm (0.010 ) ZD2025 BD2025 ZD2025S BD2025S 0.30mm (0.012 ) ZD2030 BD2030 ZD2030S BD2030S 0.33mm (0.013 ) ZD2033 BD2033 ZD2033S BD2033S page 37

EDM & ACCESSORIES GROMAX CNC Orbiting-Cut System GROMAX EDM RAM (A) V-Block Type Adapter 3R-A3620 (3R) $800.00 T-3620 (Taiwan) $430.00 3R Adapter 3R-A11489 $1020.00 This part can be replaced by 3R or EROWA Tooling system EROWA Adapter Hirschmann Adapter Computer Control Specification: Feature Membrane keyboard over 30 operation tracks Z-lock and LORAN mode control Motion Direct Circle, Square, Hexagon X Indicator and + available Power AC 110 V, 0.4KVA Dimension Setting 0.0001-0.3935 Orbit Speed 0.0059-0.0375 /Sec. in 10 Steps Dimension 16.5 x 13.8 x 11.1 (WxDxH) Weight 42 LBS. for: 3R TOOLING EDM-MARCO EDM-MINI etc. for: 3R-600.24S EROWA Tooling Set Hirschmann Tooling Set Upgrade manual EDM up to 80% CNC functions; Reduce machining time 100% & electrode wear 30%; Improves surface fi nish 50% (A) Orbit-Cut Head Specification Feature Suitable for any EDM (A) Max. Electrode Wt. 33 LBS. ORBIT15C (controller) +ORBIT15H (head) $9,800.00 Size (LxWxH) 7.87 x 7.87 x 8.66 Weight 30 LBS. X, Y Travel ± 0.1968 Repeat Accuracy 0.00039 Cuts at 45 0 for corner sharpening Hexagon machining Makes it easy to engrave a T-type channel Screw mold function Preventing buildups of debris and deformation in boring a deep hole & big plane Different sizes of cavity machining can be done using just one size of electrode. GROMAX Rotating Spindles 1/15 Horsepower Weight: 9 lbs HARIG EDM Roto-Spindle E-5 (170-100) $1,749.00 E-20 (175-100) $1,886.00 2 shank sizes: 1/2 (for E-5) 20mm (for E-20) Flush-Chuck For Roto-Spindle & other EDM rotating spindles Speeds hole-making up to 50% faster while improving accuracy & reducing electrode wear Variable speed motor operates 10-260rpm on 110V Current through spindle 10amp max. Spindle Accuracy 0.0001 Two s: E-5: ER-20 or RD-20 collets up to 1/2 E-20 holds 20mm holder Optional Accessories: 170-70 ER20 or RD20 collets set of 12 $495.00 155-100 Flush-Chuck for E-5 with 1/2 shank $462.00 160-100 Flush-Chuck for E-20 with 20 mm shank using ROHM chuck (capacity 0~1/8 ) $562.00 RS200 Set $3,200.00 RS200 $2,600.00 Spindel Only RS200.CRT $600.00 Controller Flush hole 3R-1.6S $18,995.00 3R Rotating Spindle Electrically-driven Rotating Spindle for electrode on Mini Holders.20-200rpm 3R Hi-Speed Rotating Spindle Complete Set : 1.321 HS (High Speed) page 38 200-2000rpm Wt. per set 1.321HS 6Lbs $11,225.00 1~16mm 15 pcs collet set Weight/spindle: 9 Lbs controller: 3 Lbs collet set: 4 Lbs Speed range: 0~250 rpm Control Unit: 110 VAC Collet: 1~16mm, 15 pcs set ER25 Rotating spindles designed for small hole operation with tubular electrodes; Side fl ush hole design allow to flush through the electrodes; Higher metal removal rate for deep hole operations (fl ushing + rotating = less machining time); Reduce electrode wear & improve fi nish with straighter hole.

New Harig Ultra-Grind No. 5C-V An Advanced Combination 5C Collet/V-Block System Long-life tool steel body Advanced ball and curved race ultra-precise, pre-loaded bearing Precision 24 division index (15 ) Stop pin and adjustable stops with sine arrangement for other angles plus handy lock 360 graduated dial & purge system 215-100 $3,289.00 Ultra-Grind No. 5C-V (w/ 1/2 5C collet, v-block & carrying case) Front View The Harig Ultra-Grind No. 5C-V is the version of the popular combination 5C Collet/V-Block fixture. The Harig unit offers long-life, high accuracy, reliability and many features. Quick, easy change over from Collet to V-Block. The advanced bearing is ideal for motorizing. Lube Port and Purge Line permits more EDM applications; includes 1/2 5C Collet. 3.000 center height enhances modular system. Harig Large Grind-All Fixture No.2 020-100 $4,279.00 For large capacity work including punch grinding 2 dia. V-block capacity Large face-plate area Horizontal mounting arrangement Optional rotary table mechanism High quality tool steel construction for tenths accuracy and long life EDM & ACCESSORIES HARIG Uni-Dex Ultra Precision Collet Fixture 2 mounting holes for easy set-up 24 divisions allows positioning in every 15 0 +10 seconds accuracy 2.2" diameter hub for quick interchange of accessories 5C collet configuration, holder ground in assembly to under 0.00005" runout Tool steel housing w/ intergral ball & race bearing for highest accuracy Dial graduation 360 o ; Complete w/ 1/2" 5C collet Weight: 11 Lbs 070-100 $2,370.00 Optional Accessories: Face Plate (5 dia. w/ adapter shank) 120-50 $209.00 3-Jaw Chuck (w/ adapter shank) 120-60 $1150.00 Magnetic Chuck (w/ adapter shank) 120-70 $1261.00 Accessories No. 5C-V Center Height... 3.000 Graduations.... 360 Collet... 5C & 5ST V-Block Attachment.. 1 1 / 4 dia. Purge Port... 1/8-NPT tapped entry Index Divisions... 24, every 15 10 sec. Weight... 14 lbs. 210-70 $594.00 Ultra-Grind Motor (variable speed w/ control, bracket & belt) HARIG Grind-All Fixture No.1 Rough turn, cylindrical grind, grind rectangular and radii with ± 0.0001 accuracy 24 Index division & 360º graduation Comes with carrying case V- Block capacity: 1-1/4 Center height:3 010-100 $2,882.00 Back View Optional Accessories: 210-70 Ultra-Grind Motor Attachment (50-550rpm) $594.00 120-50 Face Plate (5 dia. w/ adapter shank) $209.00 120-60 3-Jaw Chuck (w/ adapter shank) $1150.00 120-70 Magnetic Chuck (4-3/4 dia. 2-1/4 thick) $1261.00 120-50 Optional Accessories: 065-100 Super Wee-Blocks (holding 0.030 ~9/32 ) $127.00 10-55 Ball-Seat Punch Adapter $462.00 10-90 Face Plate (6 dia.) $209.00 10-40 Magnetic Chuck (4 dia.) $1375.00 085-100 Hite-Angle Plate (9-1/2 x5 x4 wide) $729.00 065-100 10-55 120-60 10-90 120-70 10-40 085-100 Grind-All No.2 w/ standard face-plate & v-block 10-52 $171.00 Radius Dresser Arm Grind-All No.2 w/ V-Block... 2 standard face-plate, Face-Plate Diameter 6 7 / 8 v-block & rotary table Center Height... 4.000 Index Divisions... 24 Graduation... 360 Net Weight... 30 lbs. Graduated in 360 V-BLOCK slides in face-plate and is also easily removable FACE PLATE is 6 7 / 8 in diameter and has tapped holes for mounting purposes. Adjustable Stops and PIN to permit stopping of swing at any desired angle. Use spacer to set at any desired angle using the sine principle. Index & Rotary Table Work Face Plate Work page 39 HAND CRANK for easy rotation and is removable when mounting unit horizontally. LOCKING SCREW to lock plate at any angle. OPTIONAL ROTARY TABLE MECHANISM Handwheel easily removed when not in use. Optional Rotary Table Mechanism available providing a geared arrangement for rotating face-plate. This rotary table arrangement is ideal for light milling and for rotary grinding. 24 division index allows for index table work. Plate is 6 7 / 8 dia. Easily mounts on Surface Grinder, Milling Machine, Jig Borer, etc., for precision face plate work. Use for generating a radius or for indexing with 24 division index. Also can be set to any angle with built-in sine arrangement. Face-plate has tapped holes for easy mounting. Submersible Spin-Grinding Fixture With the Imperial Newbould Grindit Spin Fixture you are able to: spin grind, install radii and angles, use on a milling machine, submerge in EDM fluid, and inspect angles or roundness. Wt. IM300 14 lbs $call Motorized Spin-Grinding Fixture for Installing Radii and Angles Includes: #300 GRINDIT with 5-C insert, collet nut & 2 stops V-Block Package with clamp, screws & rails Motor Package with mount, screws & 3 drive belts Partstop for use with V-Block Partstop for use with collet Wooden Case include with complete package Specifi cations: Spindle Roundness 50 millionth TIR Deflection +/-.0003 3-3/4 Out Topside Shotpin 10 arc-second repeatability Center Height 3.004 +/-.002 from bottom Thru Hole 1-1/4 plus Weight 14 lbs Base Size 3-1/2 x 4 Height 5 Bottom Holes 2-1/2 centers Material Available in A-2 or 440C Stainless Steel V-Block 1-1/2 Distance Between 2.600 +.0002 V-Block Keys V-Block Width 2.600 -.0002 HARIG Twin Angle Holding Fixture For holding electrodes on an EDM machine Hardened & Ground to a tenth s accuracy Two models available with removable ground shanks, 2 long, in two diameters: 3/4 or 20mm. Complete with Shank & Clamp V size 045-100 2 5/8 x2 7/8 and 1 3/8 x1 7/8 $385.00 185-100 3 3/4 x 2 1/4 and 2 1/4 x 2 $649.00

Ultra precision collet chucks made of special tool steel, hardened & ground to assure maximum accuracy. (concentricity 0.0004 at 2 from collet) Mini design allow access to otherwise hard to reach spots and help to reduce small tool breakages Self-releasing eliminated tools sticking in collets. O.S. WALKER EDM Workholding Chucks O.S. WALKER Ceramax Permanent Magnetic Chuck O.S. WALKER Fine Division Long Bar Pole Electromagnetic Chuck Sets include: 20mm shank chuck-holder spanner & fi tted case ER16 10pcs set: 1/32, 1/16, 3/32, 1/8, 3/16, 7/32, 1/4, 5/16, 11/32, 3/8 ER20 12pcs set: 1/16, 3/32,1/8, 3/16, 7/32, 1/4, 5/16, 11/32, 3/8, 13/32, 7/16, 1/2 Gromax ER Collet ER11 $16.00/ each ER16 $16.00/ each ER20 $17.00/ each ER25 $19.00/ each ER32 $19.00/ each ER40 $24.00/ each EDM & ACCESSORIES 20mm ER Collet- Chuck Set Description #of colletchuck per set Shank length 3R Precision Electrode Former FC750 with 3R Manual Chuck (3R-600.24-S) FC750 $3,894.00 Weight Wt lbs 16 lbs 5010 ER16 10 PCS 50mm 2 $280.00 5011 ER16 10 PCS 100mm 2 $290.00 5012 ER16 10 PCS 150mm 3 $295.00 5014 ER20 12 PCS 60mm 3 $340.00 5015 ER20 12 PCS 120mm 3 $350.00 5016 ER20 12 PCS 180mm 3 $360.00 One piece body construction; Hardened tool steel throughour; 3R Manual Chuck in Places; Revolving type handle for easy rotation. Full magnetic surface to all edges - powerful holding over entire chuck surface Fine pole divisions - for more uniform magnetic holding of small parts Simple and inexpensive tooling designs Solid construction top plate - protects permanent magnetic pack from penetration of EDM fl uids. Provides stronger, more rigid work surface Lowest height of any electric chuck - for added clearance on larger workpieces Magnetic fi eld does not affect EDM operation No complicated set-ups Accurate repeatability Size Height Watt. Wt. (lbs.) LBP48 4 x8 2-7/8 26 28 $1,020.00 LBP410 4 x10 2-7/8 32 35 $1,210.00 LBP510 5 x10 2-7/8 35 44 $1,680.00 LBP512 5 x12 2-7/8 42 54 $1,680.00 LBP610 6 x10 2-7/8 40 53 $1,680.00 LBP612 6 x12 2-7/8 50 58 $1,130.00 LBP614 6 x14 2-7/8 68 68 $1,985.00 LBP618 6 x18 2-7/8 85 88 $1,625.00 LBP815 8 x15 2-7/8 95 100 $2,235.00 LBP818 8 x18 2-7/8 100 125 $2,135.00 LBP820 8 x20 2-7/8 140 138 $2,925.00 LBP824 8 x24 2-7/8 150 163 $3,165.00 LBP1015 10 x15 2-7/8 82 163 $3,105.00 LBP1018 10 x18 2-7/8 105 200 $3,310.00 LBP1020 10 x20 2-7/8 143 213 $4,300.00 LBP1024 10 x24 2-7/8 150 269 $4,330.00 LBP1218 12 x18 3-1/8 146 175 $4,295.00 LBP1224 12 x24 3-1/8 141 232 $4,720.00 LBP1632 16 x32 3-1/8 281 $11,365.00 Automatic Release Control page 40 Touch pad control allows easy selection of full, residual, variable, and release positions Automatic release cycle assures workpiece release, freeing machine operator from manual operation Input 115VAC/ Output 0-110VDC Manual Release Control Maximum reliability - Printed circuit boards plug in for ease of service Conveniently located control dial and switch simplify adjustment 0-100% variable holding power adjustment Easily mounted with external tab Input 115VAC/ Output 0-110VDC Watt. Wt. SMART-1B 150 16 lbs $1,015.00 SMART-3B 300 20 lbs $1,380.00 SMART-5B 500 23 lbs $1,385.00 Watt. Wt SCV-1.5 150 10lbs $480.00 Full magnetic surface to all edges - powerful holding over entire chuck surface Fine pole divisions - for more uniform magnetic holding of small parts Solid construction top plate - protects permanent magnetic pack from penetration of EDM fl uids. Provides stronger, more rigid work surface Lowest height of any permanent chuck - for added clearance on larger workpieces Magnetic fi eld does not affect EDM operation Can be used inverted for holding electrode ram Easily installed and operated No complicated set-ups Accurate repeatability * Two handles Size Height Wt. (lbs) CER44 4 x4 2-3/8 13 $1,670.00 CER48 4 x8 2-3/8 25 $2,210.00 CER510 5 x10 2-5/8 36 $2,250.00 CER512 5 x12 2-5/8 45 $2,375.00 CER66 6.5 x6.5 2-5/8 33 $call CER610 6 x10 2-5/8 45 $2,315.00 CER612 6 x12 2-3/4 56 $2,430.00 CER614 6 x14 2-3/4 66 $2,500.00 CER618 6 x18 2-3/4 84 $2,710.00 CER815 8 x15 2-3/4 94 $3,305.00 CER818 8 x18 2-3/4 113 $3,390.00 CER820 8 x20 2-3/4 131 $3,450.00 CER824 8 x24 2-3/4 150 $4,430.00 CER1015 10 x15 2-3/4 118 $4,110.00 CER1018 10 x18 2-3/4 131 $4,190.00 CER1020 10 x20 2-3/4 163 $4,935.00 CER1024 10 x24 3-5/8 175 $7,000.00 CER1030* 10 x30 3-3/4 306 $call CER1218 12 x18 3-5/8 206 $6,120.00 CER1224 12 x24 3-5/8 250 $7,395.00 CER1236* 12 x36 4-5/8 563 CER1248* 12 x48 4-5/8 630 O.S. WALKER Magnetic Fixture/ Sinker EDM Made of Neodymium-Iron-Boron rare earth magnet Can be immersed in dielectric fl uid Precision ground fl at, square and parallel to an accuracy of.0005 ON/OFF switch with removable handle Size(inch) WML 2 1/2 x2 1/2 x5 1/8 Call

GROMAX Permanent Magnetic Chuck for EDM and Surface Grinder Micro pitch pole spacing Low profi le & strong rare-earth magnet Variable holding position with removable on/off activation handle Ultra thin chuck only 1.77 thick Thin & light weight work piece are ideally suitable because of fi ne-pitched magnetic poles KRTW Series 10 Pole per inch Oil-proof type is specially designed for EDM Double-Face Attracting Permanent Magnetic Block [ KPB] EDM Low Profile Oil Proof Oil Proof Type RMWH-3060A Shown Micropitch Permanent Magneic chuck Application: The double-face attraction can fix work in any location on the table with switch operation. Mounting position can be easily adjusted and any work can be held precisely by using 3 blocks of large, middle and small sizes. Widely usable as a holding fixture of any type of work, not only for electro-discharging work. KPB-2F15B KRTW: Fine pole Permanent Magnetic Chuck RMWH: Micropitch Permanent Magneic Chuck Nominal Wt. Dimension LBS 3 X5 7 RMWH-713B $404.00 4 X 7 12 KRTW1018A $530.00 RMWH-1018B $594.00 4 X10 18 RMWH-1025B $676.00 4 X12 21 RMWH-1030B $890.00 5 X10 22 RMWH-1325B $770.00 6 X 6 15 KRTW1515A $630.00 RMWH-1515B $792.00 6 X 12 31 KRTW1530A $930.00 RMWH-1530B $1,049.00 6 X 14 35 KRTW1535A $1,085.00 RMWH-1535B $1,261.00 6 X 16 40 KRTW1540A $1,235.00 6 X 18 46 KRTW1545A $1,385.00 RMWH-1545B $1,427.00 8 X 14 49 KRTW2035A $1,460.00 RMWH-2035B $1,760.00 8 X 16 55 KRTW2040A $1,665.00 RMWH-2040B $1,754.00 8 X 18 70 KRTW2045A $1,875.00 8 X 20 77 KRTW2050A $2,085.00 RMWH-2050B $2,260.00 8 X 24 93 KRTW2060A $2,350.00 RMWH-2060B $2,640.00 10 X 10 48 KRTW2525A $1,340.00 RMWH-2525B $1,540.00 10 X 12 59 KRTW2530A $1,625.00 RMWH-2530B $1,946.00 12 X 20 117 KRTW3050A $2,690.00 RMWH-3050B $3,040.00 12 X 24 139 KRTW3060A $3,050.00 RMWH-3060B $3,390.00 Double-Face Attracting Permanent Magnetic Chuck [: RMWH-2F] EDM & ACCESSORIES Magnetic force of work face (top) and mounting face (bottom) is controlled individually with the removable ON/OFF handle. Constructed for water proffness. Precision: Flatness in 0.0006 (0.015mm), Parallelism in 0.0012 (0.03mm) The work can be attracted in any size by combining the magnetic block. Powerful magnetic block never disturbs the operation and the magnetic force can switch ON/OFF by a turn of the removable handle. The set includes one pair of blocks. (Parallelism is within 0.0008 ) Water-proof constructed. Double-face attraction permits the setting of the work freely, at any position on the machine table. Nominal Dimension Holding Power Dimension Mass Width Length Height KPB-2F15B 2.0 x5.9 300N 2.0 5.9 2.0 6.6lbs.x2 $1,050.00 KPB-2F20B 2.0 x7.9 400N 2.0 7.9 2.0 8.8 lbs.x2 $1,250.00 KPB-2F30B 2.0 x11.8 600N 2.0 11.8 2.0 13.2 lbs.x2 $1,620.00 Nominal Dimension Mass Dimension Width Length Height RMWH-2F.1530A 6 x12 6 12 2.16 39 LBS $2,300.00 GREEN Synthetic EDM Fluid The Only EDM Dielectric With Chemical Satellite Electrodes, Putting The Green In Your Machines Cut Faster & Less Electrode Wear What Makes Green Different? Faster finishing rates, a result of even spark distribution Pure synthetic product eliminates frequent oil changes Eliminates DC arcing & dead zones Ends Skin Irritation No hazardous ingredients - safe for environment and your skin 99.99% Odorless Reduce Electrode Wear Increase Metal Removal Rate of 15% Reduces electrode wear up to 30% Improve Surface Quality. Description GSEF55 55 Gallon Drum $1680.00 GSEF5 5 Gallon Container $220.00 Shipping from east or west coast warehouse. Please call for more details! IonoPlus IME-MH page 41 Royal Flush Semi-Synthetic EDM Fluid Low viscosity with excellent non-clogging fl ow and backwash characteristics due to highly refi ned base stock Superior resistance to ultraviolet light (will not discolor) Much more stable fl uid, higher fl ash point, pour point of -54 C EPA tests on all components show non-sensitizing, non-toxic, and non-irritating High dielectric strength Non-detectable odor 3~4 times the oxidation stability Description RFEF55 55 Gallon Drum $795.00 RFEF5 5 Gallon Pail $104.00 GROMAX 5 Micron Filter 2 1 / 8 ID 6 OD 18 FLT-FT can be used for Easco, Sparcatron, Elox, Eltee, Gromax, Maximart, Sodick, Xermac FLT-FT $35.00/ea FLT-SUTE $35.00/ea IonoPlus vs. Royal Flush IonoPlus Appearance Fluorescent green Royal Flush Clear bright Specifi c Gravity 0.79 g/ml 0.83 g/ml Vapor Density 6.0 Lbs./gal. 6.9 Lbs./gal. Flash Point (c.o.c) 243 F 266 F Pour Point -15 C -54 C 5 Micron, pleated paper media, Buna grommet seal, service handle, wire mesh outer body 1 1 / 4 ID FLT-SUTE can be used for Agie-Mondo Series, Charmilles Roboform Series, Chevalier, CHMR, 14 Hansvedt, Pacifi c Controls, Santec/Sharp 6 OD

EDM & ACCESSORIES EROWA EDM Basic Tooling ITS Repeatability: 2 m Owing to the combination of flexing and rigid components patented wordwise. Set A: ER-021608 Set C: ER-021611 ER-017133 ITS Basic chuck 50 1 ER-016743 Spigot LC Manual 1 ER-010437 Prisround 1 Plastic Packing Box 1 $852.00 Set B: ER-021609 Set D: ER-021809 ER-017133 ITS Basic chuck 50 1 ER-016743 Spigot LC Manual 2 ER-010437 Prisround 1 ER-010551 Uniplate 1 ER-010440 Uniholder 1 ER-007818 Uniblank 1 ER-017142 ITS Basic Pallet, 105mm 1 Plastic Packing Box 1 $1,269.00 EROWA EDM Compact Tooling The small, accurate, automatic tooling system for Micromechanics and EDM ER-016217 The standard mechanical interface between milling, grinding, turning, drilling, EDM die-sinking centers and measuring or presetting stations. The economical tooling system with a high degree of precision and repeatability for flexible production. The correct procedure to benefit from the EROWA Tooling Sets: Drill holes and cut threads as required to mount electrode onto ITS electrode holder Clamp into lathe chuck or mill chuck and machine Clamp into EDM chuck and start EDMing The center point stays with the electrode, as long as it is kept on the holder Every tooling set is compatible and will fit into later investment ER-016219 ITS Basic chuck 50 Wt. 017133 6 Lbs $796.00 ER-017133 ITS Basic chuck 50 2 ER-016743 Spigot LC Manual 2 ER-010437 Prisround 1 ER-010551 Uniplate 1 ER-010440 Uniholder 1 ER-007818 Uniblank 1 ER-017142 ITS Basic Pallet, 105mm 1 ER-017135 ITS Basic Plate 1 Plastic Packing Box 1 $2,458.00 Centering Plate 50 ER-017133 ITS Basic chuck 50 2 ER-016743 Spigot LC Manual 2 ER-010437 Prisround 1 ER-010551 Uniplate 1 ER-010440 Uniholder 1 ER-007818 Uniblank 1 ER-017136 ITS Basic Pallet 120x170mm 1 ER-017135 ITS Basic Plate 1 Plastic Packing Box 1 $3,054.00 Version: Set of 50 plates, rust-resistant, including 4 supporting feet each Application: small electrode weight Fixation: Mounted directly on plane surface of blank 009214 $1,600.00 Set E: ER-021612 ER-017133 ITS Basic chuck 50 2 ER-016743 Spigot LC Manual 2 ER-010437 Prisround 1 ER-010551 Uniplate 1 ER-010440 Uniholder 1 ER-007818 Uniblank 1 ER-017142 ITS Basic Pallet, 105mm 1 ER-017136 ITS Basic Pallet 120x170mm 1 ER-017135 ITS Basic Plate 1 Plastic Packing Box 1 $2,737.00 Accuracy: 0.002mm (0.0000787 ) guaranteed through flexible centering Store capacity: 900 electrodes per square meter 4 x 90 indexable Parts size up to 50 x 50 x 100mm Designed for automation ER-029985 Compact-ITS adaper chuck $2,484.00 ER-029982 Compact chuck $2,729.00 ER-020963 Table pneumatically activated Compack chuck PA $3,688.00 ER-017541 Compact checking pin $973.00 ER-017532 Compact uniholder $839.00 ER-017530 Compact- prisround 15mm $839.00 ER-017536 Compact electrode holder 16mm $745.00 ER-034045 Compact collet chuck holder $592.00 ER-029015 Compact standard holder $380.00 ER-017539 ER-017531 High Performance Compact Design Economical ER-020963 ER-017536 ER-017530 ER-017532 ER-017541 ER-016219 ER-018858 Compact Electrode Holder Set $762.00 Article no. Description No. of unit 000682 Stud bolt M5x8 4 018293 Stud bole M5x10 12 018294 Stud bolt M5 x 6 16 ER-017529 Compact Prisround 10mm 4 ER-017530 Compact Prisround 15mm 4 ER-017532 Compact Uniholder ER-017529 2 ER-017533 Compact Electrode holder 8mm 2ER-017532 ER-017536 ER-017535 Compact Electrode Holder 12mm 2 ER-017536 Compact Electrode Holder 16mm 2 ER-017539 Compact standard Holder 6 ER-017539 ER-017530 ER-017533 018293 018294 000682 ER-017535 page 42

3R Macro Combi 2 Systems, One Chuck, No Adaptor Macro Combi provides simutaneous access to Macro and Macro Junior Systems 2 sizes of electrode holder in the same chuck! Macro - With the highest accuracy on the market for large electrodes Macro Junior - Large enough for the majority of all electrodes. The small size permits Macrojunior to machine very deep cavities. Starter Kit US468.31-S Includes: Description qty 3R-460.31-5 manual combi machining block 1 3R-656.1 Macro control rule 1 3R-405.16 Macro combi drawbar 5 3R-405.11 Junior combi drawbar 5 3R-651.7-S Pallet Macro 54x54mm 6 3R-491 Junior electrode holder 30 3R-P14.5x14 self-threading screw for 461 100 3R-465-L Holder, macro Junior 2 3R-465-V Holder, macro Junior 2 3R-658.1-S Intermediate plate, Macro 54x54mm 2 3R-658.2-S Holder, Macro 54x54mm 2 3R-658.4-S Holder, Macro 54x54mm 2 3R-333-T20 Screwdriver, TORX 1 3R-414-04 Torque wrench, 4Nm 1 $7,695.00 Manual Combi Starter Kit contains the necessary tooling to get started with system 3R s New Combi System. Electrode Holder with 50 mm long, unhardened electrode-mounting part Manual chuck for vertical or horizontal mounting on machine table. Electrode can be indexed 4x90 3R-321.46 $2,450.00 Designed for use in turning electrodes. Comes with set screws for mounting on a lathe taper and centering adjustment. Electrode can be indexed 4x90 EDM & ACCESSORIES EDM Electrode Shanks per set 3R-322/50S (set of 30) $635.00 3R-322/50E (set of 30) $800.00 Quality imiport 2050 (set of 10) $88.00 2050E (set of 30) $248.00 Mini Block 322/50E 322/50S Manual Chuck 4x90 3R-460.31-5 3R-656.1 3R-491 3R-405.16 3R-405.11 Manual Combi Macro Control Rule Junior Electrode Marco Combi Juniro Combi Machining block Holder Drawbar Drawbar Electrode Holders EHV10 with 3R Reference Element Can be attached on to 3R Chuck; Vise mounted on 3R Reference Element (54x54mm). Length Width Jaw Opening Jaw Ht. WT. lbs EHV10 3 15/16 2 3/16 1 1/4 1 4.0 EHV10 $380.00 Electrode Holders (Can fit to 3R Mini Block) EH20: with 20mm shank EH20S: Stainless holder Can be attached on to 3R Mini Block & other tooling; 1 mini vise can be mounted horizon-tally or vertically for different needs; HRC 60 Tollarance: Parallelism and Squareness are with 0.0002 / 4 Length Width Jaw Jaw WT. Opening Height lbs EH20 2-9/16 1 13/16 13/32 3.0 EH20S 2-9/16 1 13/16 13/32 3.0 EH20 $98.00 EH20S $198.00 page 43 GROMAX Electrode Holders EH25: with 20mm shank EH25S: Stainless Holder Precision vise mounted on a 20mm shank larger capacity. EH25 $218.00 EH25S $378.00 Length Width Jaw Jaw Wt Opening Height EH25 3 15/16 1 7/16 2 11/16 5 Lbs EH25S 3 15/16 1 7/16 2 11/16 5 Lbs Tollarance: Parallelism and Squareness are with 0.0002 / 4 3R-321.2-4x90 $1,940.00 Manual Mini Chuck For mounting on the machine spindle with the aid of universal adapter plate, 3R-A3620. Quick and exact mounting of electrode with accuracy of repetition inch/mm: 0.000078 / 0.002 mm Indexing 4x90. Intermediate angle set with Vernier scale Connection for pressure/suction fl ushing through the electrode Hydraulic clamping of electrode For mounting on the machine spindle with the aid of universal adapter plate, 3R-A3620. Manual C-Axis Mini Chuck Quick and exact mounting of electrode with accuracy of repetition inch/mm: 0.000078 / 0.002 mm Indexing 24x15. Intermediate angle set with Vernier scale Connection for pressure/ suction fl ushing through the electrode Hydraulic clamping of electrode 3R-321.5 $1,975.00 3R-A3620 $825.00 3R-321.65 $call 3R-A3620 $825.00

GRINDER & ACCESSORIES GROMAX SG-616M Manual Precision Surface Grinder Manual Toolroom grinder (6 x16 ) with 0.00005 microfeed mechanism SG-616M ( 6x16 ) W/ STAND. ACCESS $8,900.00 GROMAX SG-250AHD 3 Axes Automatic Precision Surface Grinder Ball bearing table (8 x18 ) 3 axes automatic surfact grinder SG-250AHD ( 8x18 ) W/ M/S&C/S, P/D & PMC.... $19,000.00 : SG616M : $8,900.00 : SG-250AHD : $19,000.00 GROMAX SG-1020AHD 3 Axes Automatic Precision Surface Grinder X & Z Turcite-B laminated ways (10 x20 ) 3 axes automatic surface grinder SG-1020AHD ( 10x20 ) W/ M/S&C/S, P/D & EMC $21,000.00 : SG-1020AHD : $21,000.00 GROMAX SG-63AHD Automatic Precision Surface Grinder Cycle controlled (12 x24 ) 3 axes automatic sufrace grinder SG-63AHD ( 12x24 ) W/ M/S&C/S, H/P/D & EMC. $25,500.00 : SG-63AHD : $25,500.00 GROMAX SG-84AHD 3 Axes Automatic Precision Surface Grinder Cycle controlled (16 x32 ) 3 axes automatic sufrace grinder SG-84AHD ( 16x32 ) W/ M/S&C/S, H/P/D & EMC $35,500.00 GROMAX SG-510AHD 3 Axes Automatic Precision Surface Grinder Cycle controlled (20 x40 ) 3 axes automatic surface grinder SG-510AHD ( 20x40 ) W/ M/S&P/F, H/P/D & EMC... $50,500.00 : SG-84AHD : $35,500.00 : SG-510AHD : $50,500.00 : SG-515AHD : $66,500.00 page 44

GRINDER & ACCESSORIES GROMAX SG-615AHD/ 620 AHD 3 Axes Automatic Precision Surface Grinder Cycle controlled (24 x60, 24 x80 ) 3 axes automatic surface grinder SG-615AHD ( 24x60 ) W/ M/S&P/F, H/P/D & EMC. $72,500.00 SG-620AHD ( 24x80 ) W/ M/S&P/F, H/P/D & EMC... $83,500.00 GROMAX SG-820AHD/830AHD/920AHD/930AHD 3 Axes Automatic Precision Surface Grinder Cycle controlled (32 x80, 32 x 120, 36 x120 ) 3 axes automatic surface grinder SG-820AHD ( 32x80 ) W/ M/S&P/F, H/P/D & EMC.. $155,500.00 SG-830AHD ( 32x120 ) W/ M/S&P/F, H/P/D & EMC $175,500.00 SG-920AHD ( 36x80 ) W/ M/S&P/F, H/P/D & EMC.. $165,500.00 SG-930AHD ( 36x120 ) W/ M/S&P/F, H/P/D & EMC $205,500.00 : SG-615AHD : $72,500.00 : SG-620AHD : $83,500.00 GROMAX Precision Surface Grinder Cartridge type spindle Precision class-7 paired & preloaded bearing Ball bearing table/ cable drive Double-V Turcite cross ways/ D-2 hardened & ground table ways Front mounted down feed handle for precision work Cast iron base Standard Accessories: Wheel balancing stand Wheel balancing arbor Wheel and fl ange Tool box and tools Flange extractor Diamond dresser Working lamp Paper Filter & Magnetic Separator speed L/MIN capacity Liter L inch W W inch H inch pump HP outlet Made in Taiwan The coolant system has three divisions: 1) Upper Division is the paper room and the inlet water tank and magnetic separator are located in it. The paper filter is in 2) Middle Division to collet the dirt from grinding. And 3) Lower Division with drainer supplies clean coolant to the workpiece. The coolant will fl ow to the water tank when it cycles from the machine. Then it goes into the magnetic separator and automatic paper fi lter and leads to the lower division, the water tank. Over sized wheels Filtrate ferrous & non-ferrous solid content 30micron paper fi lter Motor wired 220V or 440V / 3 phase Excellent for manual or CNC grinders GTM20 20 80 41.00 23.60 24.00 1/8 PF1/2 $2,130.00 GTM40 40 120 47.30 23.60 24.00 1/8 PF1/2 $2,600.00 GTM60 60 140 53.10 23.60 24.00 1/8 PF1/2 $3,400.00 GTM80 80 160 59.00 23.60 24.00 1/4 PF1/4 $3,980.00 GTM120 120 210 59.00 31.50 29.10 1/2 PF1/4 $5,360.00 GTM160 160 260 70.80 31.50 29.10 1/2 PF1/4 $6,500.00 Extra paper filter $98.00 per roll(wxl) 20 x3600 appro. Buy 3 rolls or more and receive 10% discount! page 45 SG-1545 SG-2045 Work Table Surface Area (XxY) 17.7 x 5.9 17.8 x7.8 Max. Table Travel (XxY) 10 3/4 x 22 Max. Grinding Surface (XxY) 6 X18 Max. Distance Between Center of Spindle to Table 18 Max. Table Load (Includes Magnetic Chucks) 500 lbs approx. Cross Feed on Hand Wheel (1 rev.) 0.2 0.2 (1 grad.) 0.001 0.001 Vertical Down Feed on Hand Wheel (1 rev.) 0.050 0.050 (1 grad.) 0.0002 0.0002 Wheel Speed / 60 Hz 3500 rpm 3500 rpm Wheel Dimension(O.D. x T x I.D.) 7 x 1/2 x 1-1/4 7 x 1/2 x 1 1/4 Spindle Motor 2HP 2 HP Packing Dimension 75 x51 x77 72 x 61 x 80 $12,000.00 $14,000.00 GTM.M Motor for GTM $125.00 Magnetic Separator & Coolant System L Feature: Filtrate ferrous solid content Motor wired 220V / 3 GT-MCA20 $1100.00 H1 W Optional Accessories: Parallel dresser $340.00 6 x 14 Magnetic chuck $630.00 Dust suction collector with coolant system $985.00 Coolant system $385.00 Wheel flange $70.00 H2 Speed L L/MIN (in.) GT-MCA20 20 19 gal. 23.6 W H1 H2 Pump (in.) (in.) (in.) HP outlet 15.7 11.8 26.4 1/8 PF1 1 / 2 Dust-Collector Coolant System Dust-Collector Motor: 1/2 HP Coolant Pump Motor : 1/8 HP Packing Dimension: 22 x38 x32 : GTM6 GTM6 $1250.00

GRINDER & ACCESSORIES GROMAX Cutter & Tool Grinder (Monaset) With the combination of swiveling turntable and moveable offset slide provide versatile capability to be quickly set up. The grinder can accurately generate convex and concave radii of various sizes. Made in Taiwan MN2 $29,900.00 with collet Specifi cation: General Swing over main slide (max. dia.) 12 Standard Accessories: 1. Wheelhead tooth rest assembly with extension bar 2. Grinding wheel guards with extension bar 3. Front stock support 4. Grinding wheel flanges (set of 5). (4 standard and one extension flange) 5. Diamond holder bracket 6. Wrench for workhead 7. Tooth rest centering gauge 8. Adjustable tailstock support unit 9. Spanner for grinding wheel 10. Leveling blocks 11. Standard arbor 12. Screw drive 13. Set of wrenches 14. Double-end spanner 15. Set of 4 Index Plates for spiral lead mechanism 0,8,10 & 12 divisions 16. Tool box 17. Oil bottle Optional Accessories: (price: POR) 1. Straight cylindrical collets (Metric or Inch size) (A) Taper collets (set of 3): No 2,3,4 Morse taper (B)Metric: 3,5,6,8,10,12,16,20,25 & 32 m/m Inch:1/8,3/16,1/4,5/16,3/8,7/16,1/2, 5/8,3/4,7/8,1,11/8 & 11/4" Collet work (max. dia.) 1.25 Collet work (min. dia.) 0.12 Lead generated by spiral lead mechanism (min.) 1.81 Length between spindle nose and tail center (max.) 6 Grinding wheel (max. dia.) 4 Workhead Range Main slide travel 5.75 Offset slide travel (total) 5.25 Offset slide travel (front of center) 3 Offset slide travle (rear of center) 2.25 Horizontal plane (turnable base) 235 Vertical plane (above center) 40 Longitudinal slide travel 6 Vertical slide travel (total) 9.50 Vertical slide travel (above center) 4.50 Vertical slide travel (below center) 5 Cross slide travel (total) 7.50 Cross slide travel (front of center) 3 Cross slide travel (rear of center) 4.50 Spindle Speed Workhead (1 speed) 436 rpm Workhead (3 speed) 4000, 5729, 8000 rpm (motor speed @3600 rpm) Internal grinding attachment (3 speed) 16410, 23510, 32820 rpm (extra cost) Motors Workhead drive (AC) 1/4 HP; 1/2 HP Dimensions Area of base only 25 x26 Area of machine (including swivel/overtravel) 60 x67 Height from floor to center of workhead spindle 47.42 Overall height with wheelhead raised 62.12 Net weight (including motors and controls) 1525 Lbs. All Specifi cations are subject to change without prior notice Optional Accessories: MN2.4 $135.00 Additional diamond truing tool with diamond nib MN2.5 $420.00 Grinding wheel flange for mounting grinding wheel with 1/2 hole MN2.1 $960.00 Large cutter radius grinding attachment MN2.3 $400.00/each Additional index plates for spiral lead indexing unit MN2.7 $POR Additional straight cylindrical collets MN2.2 $1,320.00 4 universal sixjaw chuck for workhead page 46 MN2.6 $660.00 Spring-loaded index pawl for workhead index plates

GRINDER & ACCESSORIES GROMAX Universal Cylindrical Grinding Machine Automatic grinding cycle, rapid wheelhead approach and retraction, automatic coarse, fi ne feed, spark-out, wheelhead retract all in one setting! Suitable for plunge, traverse, and taper grinding. JMC400AGC $55,000.00 Complete with Standard Accessories: Workhead (swivel type) H: Hydraulic table. Rapid approach & retraction AGC: Hydraulic table. Rapid approach & retraction, Automatic grinding cycle features coarse, fi ne feed and sparkout all in one setting. Suitable for plunge, traverse and taper grinding. Machine structure: Body made of Meehanite casting with honeycomb ribs providing extra rigidity Workhead: "swiveled 30 clockwise, 90 counter clockwise" Equipped with angular contact ball bearings Wheelhead: equipped with auto lube system to ensure accuracy and spindle life Accuracy: Repeatability 0.00005" Positioning 0.00005" Swivel headstock Lever operator tailstock Table swivel with dial indicator for taper grinding Coolant tank with splash guards Wheel flange & extractor Automatic lubrication system Wheel dresser Specification: JMC400 Distance between centers 16 Max. revolving diameter over bed Hydraulic tank-capacity 13.75 Gal Coolant tank capacity 19 Gal Table Hydraulic Table Speed Traverse per handwheel rotation 0.5 / rev. Swivel angle-clockwise 7 Workhead & Tail stock Wheelhead Electric Motor Swivel angle-counter clockwise 12 Workhead work center taper No.4 Tailstock work center taper No.3 Workhead swivel angle-clockwise 30 Workhead swivel angle-counter 90 clockwise Workhead spindle speed 100,140,232, 302,364,504 rpm Grinding wheel spindle speed 2100,2500 rpm Grinding wheel size (OD. xwidthx ID.) 12 x 1.25 x 5 Infeed per graduation of handwheel 0.0002 Infeed per revolution of handwheel 0.08 Rapid infeed stroke 1.5/8 Wheelhead swivel angle ±30 Wheel drive motor 3 HP Workhead spindle motor 1/2 HP Hydraulic pump motor 1 HP Wheel spindle lubricator motor 1/4 HP Coolant pump motor 1/8 HP Slide way lubricator motor 1/8 HP Floor space 87 x 71 x71 Net weight 3960 Lbs. JMC600AGC shown Optional Accessories: For JMC400 Internal Grinding Attachment jmc400.1 $5,841.00 3-point Steady Rest jmc400.2 $671.00 2-point Steady Rest jmc400.3 $556.60 2-point heavy load rest (a couple) NA - 3-jaw Chuck w/mounting plate jmc400.5 $649.00 4-jaw chuck w/ mounting plate jmc400.6 $682.00 Permanent magnetic chuck w/ plate jmc400.7 $737.00 Roll coolant magnetic chuck w/ plate jmc400.8 $1,460.80 Paper band fi lter jmc400.9 $2,233.00 Radius Forming Attachment jmc400.10 $1,375.00 Angular Forming Attachment jmc400.11 $1,111.00 Extra Wheel Flange jmc400.12 $506.00 Spare grinding wheel jmc400.13 $176.00 Static balancing unit jmc400.14 $517.00 Carbide tipped full & half center (ea) jmc400.15 $160.60 Work carrier jmc400.16 $275.00 Grinding gage for manual sizing jmc400.17 $2,678.50 Hydraulic wheel dresser holder (use when w/n I.D. attachment) jmc400.18 $3,399.00 Wheel micro infeed attachment (for AGC model) jmc400.19 $2,387.00 Hydraulic tailstock jmc400.20 $2,365.00 page 47

GRINDER & ACCESSORIES GROMAX Universal Cutter & Tool Grinder Standard Equipment and tool cabinet: With the standard equipment alone, G40 is capable of grinding the following cutters; plain milling cutters, end mills, shell end mills, groove milling cutters, key way milling cutters, angular milling cutter, face mills (max. 8 dia) (200 mm), circular saws (max. 48 dia. ) (1200 mm), taps and Reamers. Specification: Swing over table 10 Distance between centers 27-1/2 Distance between workhead & tail stock 22-3/4 Workhead spindle taper one end -- other end ASA No. 50 -- MT No. 5 Table surface 5-5/16 x 37 Longitudinal movement of table 16 Cross movement of saddle 10 Table swivel +60 Graduation on end of table for taper +10 Vertical movement of wheel head 10 Wheel head tilts +15 Wheel head swivel 360 From wheel head spindle center to top of table 2 to 12 From wheel head spindle center to T-slot center line 6-1/2 to 16-1/2 Grinding wheel spindle speed 2600,3700,6200 RPM Grinding wheel spindle drive motor 1 HP Optional Equipments: G40.1 Cylindrical Grinding Attachment : Swing: 10 Main spindle speed: 310/370rpm Motor: 1/4HP $1640.00 This attachment is most suitable for straight or taper cylindrical grinding and for face grinding of various tools. G40.2 Internal Grinding Attachment : Internal spindle: 35,000 or 20,000rpm Length of hole up to 1 9 / 16 or 3 Range of bore: 5/16 3/4 or 1/2 2 $2,350.00 This is generally used with the Cylindrical Grinding Attachment. This can be used for grinding internal tapers. G40.3 Spring Collet Chuck Size of collets: $930.00 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 1 This chuck can be mounted directly in the taper hole of the workhead ASA No.50. This is an indispensable attachment for small cutter grinding. Spring Collet Chuck for larger size cutters or adaptor for 5C collets is also available. G40.5 No.2 Radius Grinding Attachment : $4,950.00 Radius: 0-1 Max. dia. of cutter: 11 3 / 4 An accurate radius on the corner of teeth canbe ground. Suitable for corner radius grinding of face mills and shell end mills. The position for grinding start is set by the micrometer to eliminate grinding error. G40.6 Dust Collector $1,640.00 Motor: 1HP As a health measure dust collector should be connected to all machine. This accessory contributes toward operator safety and health by collecting dust particles fl ying off the grinding wheel during grinding. It is compact and consumes a minimum of fl oor space. G40.9 Drill Pointing Attachment : Dia. of drill: 1/8-1 $5,073.00 Convenient for precision grinding of drill tip relief angles. It can handle drills of 1/8 to 1. G40.10 Helical Grinding Attachment Taper hole: M.T. No. 4 Lead: 0- (stepless) Spindle turns twice max. Index: 24 (standard) Grinding dia.: max. 5 $8,855.00 Grinding length: max. 12 1 / 2 (in case that helic angle is 0 ) Module (Hob): max. 8 Helix (Hob): max. 8 This attachment is suitable for grinding the relief and rake angle of spiral cutters. G40.7.24 Workhead Indexing Attachment G40.11 Extended Grinding Wheel Spindle Includes one 24-notched $720.00 3 extension index plate. Extra index plates: 1/8HP specify number of notches desired. Accurate indexing can be made $2,900.00 quickly and easily by mounting the Indexing Attachment onto Convenient when the extended spindle application is required. Spindle is also cartridge the standard workhead. This eliminates the need for a tooth rest which is normally type and interchangeable with standard required for grinding cutters. spindle. G40 $21,800.00 Please visit www.gromax-usa.com for more parts list. G40.13 Face Mill Grinding Attachment : Max. dia$4,345.00 of cutter: 18 This attachment comprises a base, swivelling horizontally with respect to table, and a workhead swivelling at a 15 angle. This construction simplifi es greatly the setting of elevation and depression angle. Rugged design gives the J-40 the capacity for grinding large size cutters and tools. G40.14 Surface Grinding Attachment : $1,170.00 Width of vise: 4 Depth of vise: 1 Opening: 2 3 / 4 So called Universal Vise. It consists of a swivel vise and independent support provided between the vise and base. The intermediate support permits the vise to swivel 360 horizontally and vertically. G40.15 Wet Grinding Attachment Coolant pump motor: $1,080.00 So called Coolant Supply System. It is conveniently used for cylindrical, internal, surface and various cutters grinding works when necessary. G40.4 No.1 Radius Grinding Attachment G40.8 Lathe & Planer Tool Grinding : $5,790.00 Attachment Radius: 0-2 : 3/8-1 1 / 2 $1,140.00 (in case that max. dia. of cutter is 4 ) Convenient for Taper hole: grinding rake face M.T. No.5 and relief angles. or B & S No.12 The large work Convenient for grinding of ball end mills support provides and styli. It consists of two slide bases, an outstanding grinding capacity. This attachment is ideally suited to grinding cutters each with micrometer adjustment and a workhead. for lathes and planers. G40.12 Raiser-Block Height: 2 This attachment is used when the additional height of the workhead or workpiece is necessary for grinding. $370.00 G40.16 Dust collector & wet grinding attachment $2,400.00 G40.17 Hydraulic table feed attachment $7,800.00 G40.18 Long reamer grinding attachment $5,100.00 G40.19 Small end mill grinding attachment $720.00 G40.20 Gear cutter sharpening attachment $2700.00 G40.21 C Collet closer $600.00 page 48

Diamond Wheel 100% Concentration TYPE 1A1 Straight Style Resin Bond 1/8 (X) Depth of Diamond 100% Concentration / 150 Grit Example: 8: Depth of Diamond (X)=1/8 150: Grit S: Made in USA, J: Import Quality 12031.8.150S DIA TH. Hole Dia Made in USA Quality Import 4 1/16 1-1/4 12031.8.150S $101.00 12031.8.150J $55.00 4 1/8 1-1/4 12032.8.150S $103.00 12032.8.150J $55.00 4 1/4 1-1/4 12033.8.150S $125.00 12033.8.150J $68.00 5 1/8 1-1/4 12038.8.150S $107.00 12038.8.150J $57.00 5 1/4 1-1/4 12039.8.150S $131.00 12039.8.150J $71.00 6 1/16 1-1/4 12043.4.150S $127.00 12043.4.150J $69.00 6 1/8 1-1/4 12044.8.150S $127.00 12044.8.150J $69.00 6 1/4 1-1/4 12045.8.150S $140.00 12045.4.150J $97.00 12045.4.400J $97.00 6 3/8 1-1/4 12046.8.150S $160.00 12046.4.150J $122.00 6 3/8 1-1/4 12046.4.400J $122.00 6 1/2 1-1/4 12047.8.150S $277.00 12047.4.150J $159.00 6 1/2 1-1/4 12047.4.380J $159.00 7 1/8 1-1/4 12049.8.150S $133.00 12049.8.150J $72.00 7 1/4 1-1/4 12050.8.150S $147.00 12050.4.150J $115.00 7 1/4 1-1/4 12050.4.380J $115.00 7 3/8 1-1/4 12051.8.150S $179.00 12051.4.150J $147.00 7 3/8 1-1/4 12051.4.380J $147.00 7 1/2 1-1/4 12052.8.150S $192.00 12052.4.150J $184.00 7 1/2 1-1/4 12052.4.380J $184.00 8 1/4 1-1/4 12055.8.150S $190.00 12055.4.150J $126.00 8 1/4 1-1/4 12055.4.380J $126.00 8 1/2 1-1/4 12055.8.150S $243.00 12055.4.150J $202.00 8 1/2 1-1/4 12055.4.380J $202.00 8 3/4 1-1/4 12054.4.150J $271.00 8 3/4 1-1/4 12054.4.380J $271.00 10 1/4 3 12057.8.150S $259.00 12057.8.150J $139.00 10 1/2 3 12059.8.150S $502.00 12059.4.150J $285.00 10 1/2 3 12059.4.380J $285.00 10 1/2 1-1/4 12058.4.150J $285.00 10 1/2 1-1/4 12058.4.380J $285.00 10 1 3 12098.8.150S $573.00 12098.8.150J $308.00 10 1 5 120985.8.150S $573.00 120985.8.150J $308.00 12 1/2 3 12061.8.150S $563.00 12061.8.150J $303.00 12 1/2 5 120615.8.150S $563.00 120615.4.150J $523.00 12 1/2 5 120615.4.380J $523.00 12 1 3 12099.8.150S $746.00 12099.8.150S $402.00 12 1 5 120995.8.150S $746.00 120995.8.150S $402.00 14 1/2 5 12063.8.150S $640.00 12063.8.150J $345.00 14 1/2 8 120638.8.150S $640.00 120638.8.150J $345.00 14 1 5 12100.8.150S $871.00 12100.8.150J $470.00 14 1 8 121008.8.150S $871.00 121008.8.150J $470.00 16 1 5 12091.8.150S $970.00 12091.8.150J $523.00 16 1 8 120918.8.150S $970.00 120918.8.150J $523.00 16 1 10 1209110.8.150S $970.00 1209110.8.150J $523.00 16 1 12 1209112.8.150S $970.00 1209112.8.150J $523.00 20 1 5 12097.8.150S $1,346.00 12097.8.150J $724.00 20 1 8 120978.8.150S $1,346.00 120978.8.150J $724.00 20 1 10 1209710.8.150S $1,346.00 1209710.8.150J $724.00 20 1 12 1209712.8.150S $1,346.00 1209712.8.150J $724.00 TYPE 1A1R Cut-Off Wheel Resin Bond 1/8 (X) Depth of Diamond 100% Concentration / 150 Grit TYPE 6A2C Plain Cup Resin Bond 1/8 (X) Depth of Diamond 100% Concentration / 150 Grit 6 for Baldor, Carboloy, Criterion, Delta, Ex-Cell-O, Hammond,Lemaire, Prosser, Sundstrand, Willey, Standard Electric Co. Dia. (D) TYPE 11V9 Flaring Cup Resin Bond 1/8 (X) Depth of Diamond 100% Concentration / 150 Grit Dia. (D) page 49 Th. (T) Th. (E) Insert (U) Dia. (D) Th. (T) Made in USA Hole dia. (H):1 1/4 Quality Import Order # Order # 6 0.035 S18024 $91.00 S18024J $64.00 6 0.045 S18079 $91.00 S18079J $64.00 6 0.055 S18025 $101.00 S18025J $71.00 8 0.045 S18088 $129.00 S18088J $90.00 Th (T) Rim (W) Hole dia. (H):1 1/4 Made in USA Quality Import Order # Order # 6 3/4 1/2 S61802 $153.00 S61802J $128.00 6 3/4 3/4 S61803 $184.00 S61803J $157.00 6 1-1/2 3/4 S61804 $202.00 S61804J $169.00 Made in USA Hole dia. (H):1 1/4 Quality Import Order # Order # 3-3/4 1-1/2 3/8 3/8 S115002 $97.00 S115002J $68.00 5 1-3/4 7/16 7/16 S115003 $123.00 S115003J $89.00 TYPE 12A2 Dish Wheel Resin Bond 1/8 (X) Depth of Diamond 100% Concentration / 150 Grit Hole dia. (H):1 1/4 Made in USA Quality Import Order # Order # Dia. (D) Th. (T) Rim W. (W) Th. (E) 4 1/2 1/4 5/16 S121008 $97.00 S121008J $68.00 4 1/2 3/8 5/16 S121009 $107.00 S121009J $75.00 6 1 3/16 1/2 S121003 $101.00 S121003J $71.00 6 1 1/4 1/2 S121004 $108.00 S121004J $75.00 6 1 3/8 1/2 S121005 $123.00 S121005J $87.00 TYPE 15V9 Dish Wheel Resin Bond 1/8 (X) Depth of Diamond 100% Concentration / 150 Grit Made in USA Quality Import Dia. Th Hole Insert Order # Order # (D) (T) Dia. (H) (U) 6 3/4 1-1/4 1/4 S155001 $124.00 S155001J $88.00 TYPE 11A2 Dish Wheel Resin Bond 1/8 (X) Depth of Diamond 100% Concentration / 150 Grit TYPE 12V9 Dish Wheel Resin Bond 1/8 (X) Depth of Diamond 100% Concentration / 150 Grit Dia. (D) Made in USA Quality Import Dia. (D) Th. (T) Rim W. (W) Order # Order # 3 7/8 3/8 S105000 $108.00 S105000J $71.00 4 1-1/4 1/2 S105001 $114.00 S105001J $80.00 5 1-3/4 3/8 S105002 $133.00 S105002J $93.00 Th. (T) Insert (U) Back Angle (B) GRINDER & ACCESSORIES U Hole dia. (H):1 1/4 Hole dia. (H):1 1/4 Made in Quality USA Import Order # Order # 3 7/16 1/4 30 S106000 $92.00 S106000J $65.00 4 1/2 1/4 30 S106001 $113.00 S106001J $79.00 6 3/4 3/8 30 S106002 $157.00 S106002J $110.00 D H E T

GRINDER & ACCESSORIES CBN Wheel 100% Concentration TYPE 1A1 Straight Style CBN Resin Bond 1/8 (X) Depth of Diamond 100% Concentration / 150 Grit Dia. (D) Th (T) Hole Dia. (H) Made in Quality USA Import Order # Order # 4 1/16 1-1/4 SC12031 $88.00 SC12031J $62.00 4 1/8 1-1/4 SC12032 $105.00 SC12032J $73.00 4 1/4 1-1/4 SC12033 $148.00 SC12033J $103.00 5 1/8 1-1/4 SC12038 $114.00 SC12038J $80.00 5 1/4 1-1/4 SC12039 $167.00 SC12039J $117.00 6 1/16 1-1/4 SC12043* $136.00 SC12043J* $95.00 *1/4 (X) diamond depth *1/4 (X) diamond depth 6 1/8 1-1/4 SC12044 $146.00 SC12044J $102.00 6 1/4 1-1/4 SC12045 $184.00 SC12045J $130.00 6 3/8 1-1/4 SC12046 $224.00 SC12046J $157.00 6 1/2 1-1/4 SC12047 $277.00 SC12047J $194.00 7 1/4 1-1/4 SC12050 $207.00 SC12050J $146.00 7 3/8 1-1/4 SC12051 $281.00 SC12051J $196.00 7 1/2 1-1/4 SC12052 $342.00 SC12052J $239.00 8 1/4 1-1/4 SC12055 $250.00 SC12055J $176.00 8 1/2 1-1/4 SC12056 $394.00 SC12056J $276.00 10 1/4 3 SC12057 $333.00 SC12057J $233.00 10 1/2 3 SC12059 $630.00 SC12059J $441.00 TYPE 6A2C Plain Cup CBN Resin Bond 1/8 (X) Depth of Diamond 100% Concentration / 150 Grit 6 for Baldor, Carboloy, Criterion, Delta, Ex-Cell-O, Hammond, Lemaire, Prosser, Sundstrand, Willey, Standard Electric Co. Made in USA Quality Import Dia. (D) Th. (T) Hole (H) Rim (W) Order # Order # 6 3/4 1-1/4 1/2 SC61802 $305.00 SC61802J $213.00 6 3/4 1-1/4 3/4 SC61803 $458.00 SC61803J $324.00 6 1-1/4 1-1/4 3/4 SC61804 $505.00 SC61804J $353.00 TYPE 11V9 Flaring Cup CBN Resin Bond 1/8 (X) Depth of Diamond 100% Concentration / 150 Grit Hole dia. (H):1 1/4 Made in USA Quality Import Dia. Th Th. Insert Order # Order # (D) (T) (E) (U) 3-3/4 1-1/2 3/8 3/8 SC115002 $138.00 SC115002J $96.00 5 1-3/4 7/16 7/16 SC115003 $232.00 SC115003J $162.00 TYPE 12A2 Dish Wheel CBN Resin Bond 1/8 (X) Depth of Diamond 100% Concentration / 150 Grit Hole dia. (H):1 1/4 Made in USA Quality Import Dia. Th Rim W. Back Order # Order # (D) (T) (W) (E) Th 6 1 3/16 1/2 SC121003 $157.00 SC121003J $110.00 6 1 1/4 1/2 SC121004 $184.00 SC121004J $130.00 6 1 3/8 1/2 SC121005 $218.00 SC121005J $153.00 TYPE 15V9 Dish Wheel CBN Resin Bond 1/8 (X) Depth of Diamond 100% Concentration / 150 Grit Hole dia. (H):1 1/4 Made in USA Quality Import Dia. (D) Th (T) Insert L. (U) Order # Order # 6 3/4 1/4 SC155001 $199.00 SC155001J $139.00 page 50 TYPE 11A2 Dish Wheel CBN Resin Bond 1/8 (X) Depth of Diamond 100% Concentration / 150 Grit Dia. (D) Diamond Wheel Cup Diamond Wheel Cup is also available in... Type 1EE1 Type 1FF1 Type 2A2T Type 6A2 Type 6A9 Type 6A2H Type 9A3H 14A1 Type DW Hones Type HH1 Type HH2 s Upon Request Specify the wheel type and number, hole diameter, grit size, grade, bond type, diamond concentration, diamond depth. TYPE 1EE1: Straight - E Face Diamond in Periphery Made in Quality USA Import Wheel Wheel Enclosed Diamond Dia. D Th. T Angle V Depth X 3 1/8 70 1/8 S14008 $114.00 S14008J $80.00 3 1/4 60 1/8 S14009 $127.00 S14009J $90.00 4 1/8 70 1/8 S14011 $124.00 S14011J $88.00 4 1/4 60 1/8 S14002 $142.00 S14002J $100.00 6 1/8 70 1/8 S14013 $152.00 S14013J $107.00 6 1/4 60 1/8 S14004 $177.00 S14004J $123.00 TYPE 1FF1: Straight - F Face Diamond in Periphery Made in Quality USA Import Wheel Wheel Face Diamond Dia. D Th. T Radius R Depth X 3 1/4 1/8 1/8 S16003 $85.00 S16003J $60.00 4 1/4 1/8 1/8 S16011 $105.00 S16011J $73.00 6 1/4 1/8 1/8 S16007 $152.00 S16007J $107.00 7 1/4 1/8 1/8 S16008 $167.00 S16008J $117.00 TYPE 2A2T: Cylinder - Threaded Holes Diamond in Rim Made in USA Quality Import Wheel Wheel Rim Diamond Dia. D Th. T Width W Depth X 10 3/4 1/4 1/8 S21006 $340.00 S21006J $238.00 10 3/4 1/2 1/8 S21007 $390.00 S21007J $274.00 10 3/4 3/4 1/8 S21004 $441.00 S21004J $309.00 10 3/4 1 1/8 S21001 $492.00 S21001J $345.00 10 1 1 1/8 SPD22181 $509.00 SPD22181J $356.00 12 1 1/2 1/8 SPD22163 $542.00 SPD22163J $381.00 12 1 1 1/8 SPD22164 $610.00 SPD22164J $428.00 18 3/4 3/4 1/8 S21020 $1,357.00 S21020J $951.00 18 3/4 1 1/8 S21003 $1,484.00 S21003J $1,039.00 18 1 3/4 1/8 SPD22157 $1,416.00 SPD22157J $993.00 18 1 1/4 1 1/8 SPD21893 $1,526.00 SPD21893J $1,068.00 TYPE 6A2: Plain Cup Diamond in Rim Wheel Dia. (D) Hold dia. (H):1 1/4 TYPE 12V9 Dish Wheel CBN Resin Bond 1/8 (X) Depth of Diamond 100% Concentration / 150 Grit Th. (T) Hole Dia. (H) Wheel Th (T) Insert L. (U) Rim Width W Back Th. E Made in USA Back Angle (B) Diamond Depth X Made in USA Made in USA Quality Import Dia. (D) Th (T) Rim W. (W) Order # Order # 3 7/8 3/8 SC105000 $157.00 SC105000J $110.00 4 1-1/4 1/2 SC105001 $218.00 SC105001J $153.00 5 1-3/4 3/8 SC105002 $226.00 SC105002J $158.00 Quality Import Order # Order # 4 1/2 1-1/4 1/4 30 SC106001 $148.00 SC106001J $103.00 6 3/4 1-1/4 3/8 30 SC106002 $209.00 SC106002J $146.00 Quality Import 4 3/4 1/2 3/8 1/8 S61015 $125.00 S61015J $88.00 6 3/4 3/16 3/8 1/8 S61012 $125.00 S61012J $88.00 6 3/4 1/4 3/8 1/8 S61011 $129.00 S61011J $90.00 6 3/4 3/8 3/8 1/8 S61001 $136.00 S61001J $95.00 6 3/4 1/2 3/8 1/8 S61002 $139.00 S61002J $97.00 6 3/4 3/4 3/8 1/8 S61003 $166.00 S61003J $116.00

TYPE 6A9: Plain Cup Diamond in Periphery TYPE 6A2H: Plain Cup - With Bolt Holes Diamond in Rim TYPE 9A3H: Double Cup - With Bolt Holes Diamond in Rim Wheel Dia. D TYPE 14A1: Straight - Raised Hubs Diamond in Periphery Wheel Wheel Dia. D Th. T Hole Dia. H Rim Width W TYPE DW: Straight - Mounted on Mandrel Diamond Through Made in USA Back Th. E Diamond Depth X Made in Quality USA Import For Head 5 1 1 1/4 1 1/16 1/2 1/8 S61901 $252.00 S61901J $177.00 Wheel Dia. D Made in Quality USA Import Mode Mode Wheel Th. T Rim Width W Back Th. E Diamond Depth X for Hager B 6 1 1/4 1/2 1/8 S91901 $229.00 S91901J $161.00 6 1 3/8 1/2 1/8 S91902 $245.00 S91902J $171.00 6 1 1/2 1/2 1/8 S91903 $275.00 S91903J $193.00 for Hager s C & D 6 1 1/4 1/2 1/8 S91904 $229.00 S91904J $161.00 6 1 3/8 1/2 1/8 S91905 $245.00 S91905J $171.00 6 1 1/2 1/2 1/8 S91906 $275.00 S91906J $193.00 Made in USA Quality Import Wheel Wheel Hub Face Diamond Dia. D Th. T Dia. H Th. U Depth X 7 1/2 4 1/8 1/8 S141002 $236.00 S141002J $165.00 10 1/2 7 1/4 1/8 S141003 $440.00 S141003J $308.00 Wheel Th. T Mandrel Dia. M Wheel Dia. D Wheel Th. T Mandrel Dia. M Made in USA page 51 1/8 1/4 1/8 SDW144 $30.00 3/8 1/2 1/8 SDW176 $87.00 3/16 1/4 1/8 SDW152 $32.00 1/2 1/4 1/8 SDW183 $65.00 1/4 1/4 1/8 SDW160 $34.00 1/2 1/2 1/8 SDW185 $97.00 1/4 3/8 1/8 SDW162 $41.00 5/8 1/4 1/8 SDW192 $97.00 5/16 1/4 1/8 SDW167 $44.00 5/8 1/2 1/8 SDW194 $132.00 3/8 1/4 1/8 SDW174 $51.00 3/4 1/2 1/8 SDW203 $186.00 3/8 3/8 1/8 SDW175 $60.00 1 1/4 1/4 SDW216 $208.00 TYPE HH1: Hand Hone Diamond insert One End Made in USA Quality import Length L Wheel Dia. D Width W Wheel Th. T Th. T Back Th. E Inside Flat K Length Insert L-1 Insert Length U Diamond Concentration Diamond Depth X Diamond Depth X Made in USA Quality Import 3 1 1/2 3/8 2 1/4 1/2 1/8 S65001 $105.00 S65001J $73.00 5 1 1/2 3/8 4 1/2 1/8 S65002 $120.00 S65002J $85.00 6 1 1/2 3/8 5 1/2 1/8 S65003 $139.00 S65003J $97.00 12 1 5/16 1/2 11 1/4 1/2 1/8 S65004 $488.00 S65004J $342.00 4 3/8 3/8 1 100 1/16 SDH-103-B $41.00 SDH-103-BJ $29.00 4 3/8 3/8 1 1/2 100 1/16 SDH-104-B $49.00 SDH-104-BJ $34.00 6 1/4 1/4 1 100 1/16 SDH-107-B $41.00 SDH-107-BJ $29.00 6 3/8 3/8 1 100 1/16 SDH-108-B $41.00 SDH-108-BJ $29.00 TYPE HH2: Hand Hone Diamond insert Each End Made in USA Quality import Length L Width W Th. T Length Insert L-1 Diamond Concentration Diamond Depth X 4 3/8 3/8 1 100 1/16 SDH-203-B $53.00 SDH-203-BJ $38.00 4 3/8 3/8 1 1/2 100 1/16 SDH-204-B $57.00 SDH-204-BJ $41.00 6 1/4 1/4 1 100 1/16 SDH-207-B $53.00 SDH-207-BJ $38.00 6 3/8 3/8 1 100 1/16 SDH-208-B $53.00 SDH-208-BJ $38.00 GRINDER & ACCESSORIES GROMAX Surface Grinding Wheel Standard Wheel Markings WA 46 K 8 V Abrasive Grit Grade Structure Bond Type Grade Very soft - Soft Medium D. E. F. G. H. I. J. K. L. M. N. O. P. Q. Medium Hard Very hard O. P. Q. R. S. T. U. V. W. X. Y. Z. Grits (CNS & JIS standard) Coarse 10, 12, 14, 16, 20, 24 Medium 30, 36, 46, 54, 60 Fine 70, 80, 90, 100,120, 150, 180, 220 Very Fine 240, 280, 320, 400, 500, 600, 700, 800 Ultra Fine 1000, 1200, 1500, WA: White Aluminum Oxide 32A: Monocrystaline Aluminum Oxide 93A: Combination of Ruby Aluminum Oxide and WA,SA GC: Green Silicon Carbide WA is very friable, fast and cool cutting, best for light grinding or steels of all types, tool and die steels. WA Type shown WA SURFACE GRINDING WHEELS (STRAIGHT TYPE) WA WHEEL: 7 x1/4 x 1-1/4 GRIT Specification ORDER# EACH 60K WA-60-K-8-V WKK8V01 $21.00 80K WA-80-K-8-V WMK8V01 $21.00 100K WA-100-K-8-V WOK8V01 $21.00 WA WHEEL: 7 x1/2 x1-1/4 GRIT Specification ORDER# EACH 46H WA-46-H-12-V WIH12V02 $22.50 46I WA-46-I-8-V WII8V02 $22.50 46J WA-46-J-8-V WIJ8V02 $22.50 46K WA-46-K-8-V WIK8V02 $22.50 60I WA-60-I-8-V WKI8V02 $22.50 60J WA-60-J-8-V WKJ8V02 $22.50 60K WA-60-K-8-V WKK8V02 $22.50 80K WA-80-K-8-V WMK8V02 $22.50 100K WA-100-K-8-V WOK8V02 $22.50 120K WA-120-K-8-V WPK8V02 $22.50 WA WHEEL: 7 x3/4 x1-1/4 GRIT Specification ORDER # EACH 46K WA-46-K-8-V WIK8V03 $30.00 60K WA-60-K-8-V WKK8V03 $30.00 80K WA-80-K-8-V WMK8V03 $30.00 WA WHEEL: 7 x1 x 1-1/4 GRIT Specification ORDER# EACH 46K WA-46-K-8-V WIK8V04 $33.50 WA WHEEL: 8 x1/4 x 1-1/4 GRIT Specification ORDER# EACH 80K WA-80-K-8-V WMK8V05 $27.00 100K WA-100-K-8-V WOK8V05 $27.00 WA WHEEL: 8 x1/2 x 1-1/4 GRIT Specification ORDER# EACH 46K WA-46-K-8-V-7V WIK8V7V06 $27.00 60K WA-60-K-8-V WKK8V06 $27.00 WHEEL: 10 x1 x 3 GRIT Specification ORDER# EACH 46K WA-46-K-8-V WIK8V07 $54.50 WA WHEEL: 12 x1 x3 GRIT Specification ORDER# EACH 46K WA-46-K-8-V WIK8V08 $84.00 46J WA-46-J-8-V WIJ8V08 $84.00 46I WA-46-I-8-V WII8V08 $84.00

GRINDER & ACCESSORIES WA SURFACE GRINDING WHEELS (STRAIGHT TYPE)WA WA WHEEL: 12 x1 x5 GRIT Specification ORDER# EACH 46K WA-46-K-8-V WIK8V09 $78.00 46J WA-46-J-8-V WIJ8V09 $78.00 46I WA-46-I-8-V WII8V11 $78.00 WA WHEEL: 12 x1-1/2 x5 GRIT Specification ORDER# EACH 46K WA-46-K-8-V WIK8V11 $128.00 WA WHEEL: 14 x1 x5 GRIT Specification ORDER# EACH 46J WA-46-J-8-V WIJ8V12 $176.00 46K WA-46-K-8-V WIK8V12 $176.00 WA WHEEL: 14 x1-1/2 x5 GRIT Specification ORDER# EACH 46K WA-46-K-8-V WIK8V13 $153.00 WA WHEEL: 14 x2 x5 GRIT Specification ORDER# EACH 46J WA-46-J-8-V WIJ8V14 $192.00 93A: Combination of Ruby Aluminum Oxide and WA, SA 93A Type shown 93A SURFACE GRINDING WHEELS (STRAIGHT TYPE) 93A WHEEL: 7 x1/2 x1-1/4 GRIT Specification ORDER# EACH 46H 93A-46-H-10-V JIH10V02 $29.00 60H 93A-60-H-10-V JKH10V02 $29.00 93A WHEEL: 7 x3/4 x1-1/4 GRIT Specification ORDER# EACH 46H 93A-46-H-10-V JIH10V03 $38.00 93A WHEEL: 7 x1 x1-1/4 GRIT Specification ORDER# EACH 46H 93A-46-H-10-V JIH10V04 $42.00 GC Type shown GC SURFACE GRINDING WHEELS (STRAIGHT TYPE) GC WHEEL: 7 x1/2 x1-1/4 GRIT Specification ORDER# EACH 80I GC-80-I-8-V GMI8V02 $29.00 100I GC-100-I-8-V GOI8V02 $29.00 PSA SURFACE GRINDING WHEELS (STRAIGHT TYPE) PSA WHEEL: 12 x1-1/4 x3 EACH GRIT Specification ORDER# $117.00 46H PSA-46-H-10-VP QIH10VP10 PSA WHEEL: 14 x2 x5 EACH GRIT Specification ORDER# $249.00 46H PSA-46-H-10-VP QIH10VP14 $178.00 32A This premium single-crystal aluminum oxide grain is well suited for precision grinding of tool steels and heat sensitive steel. 32A Type shown 32A SURFACE GRINDING WHEELS (STRAIGHT TYPE) 32A WHEEL: 7 x1/4 x1-1/4 GRIT Specification ORDER # EACH 120K 32A-120-K-8-V DPK8V01 $19.50 150K 32A-150-K-8-V DQK8V01 $19.50 32A WHEEL: 7 x1/2x1-1/4 GRIT Specification ORDER# EACH 46H 32A-46-H-12-VP DIH12VP02 $26.50 32A WHEEL: 8 x1/4 x1-1/4 GRIT Specification ORDER# EACH 120K 32A-120-K-8-V DPK8V05 $26.50 32A WHEEL:14 x1-1/2 x5 GRIT Specification ORDER# EACH 46H 32A-46-H-10-VP DIH10VP13 $198.00 GROMAX Tool Room Grinding Wheel GC: Silicon Carbide for general purpose and rough grinding of Tungsten Carbide and nonferrous materials GC TOOL ROOM GRINDING WHEELS 2-1A Type GC WHEEL: 6 x1 x1-1/4 CTN OF 1 WA TOOL ROOM GRINDING WHEELS 6A Type GRIT Specification ORDER# EACH 60I GC-60-I-V GKIV29 $62.00 80I GC-80-I-V GMIV29 $62.00 100I GC-100-I-V GOIV29 $62.00 WA WHEEL: 4 x2 x20mm GRIT Specification ORDER# EACH 80J WA-80-J-V WMJV23 $25.00 WA WHEEL: 5 x1-1/2 x1-1/4 GRIT Specification ORDER# EACH 60K WA-60-K-V WKKV25 $29.00 WA WHEEL: 3-1/2 x1-1/2 x1-1/4 GRIT Specification ORDER# EACH 60K WA-60-K-V WKKV22 $24.00 WA WHEEL: 4 x1-1/2 x1-1/4 GRIT Specification ORDER# EACH 60K WA-60-K-V WKKV24 $25.00 11A Type WA WHEEL: 5 x1-3/4 x1-1/4 GRIT Specification ORDER# EACH 60K WA-60-K-V WKKV26 $36.00 12A Type WA WHEEL: 6 x1/2 x1-1/4 GRIT Specification ORDER# EACH 80J WA-80-J-V WMJV27 $25.00 WA WHEEL: 6 x3/4 x1-1/4 GRIT Specification ORDER# EACH 60J WA-60-J-V WKJV28 $34.00 page 52

Magnetic V-Block Application: Suitable to hold round steel for precision work in measuring, marking and grinding Two pieces finished to the same dimension are finished together for a set Finished in both standard and special class precisions ON/OFF switch makes it easy to operate and remove the block (pair for a set) Holding Power Applicable Diameter Dimension Weight B L H GCE-507 33.07 lbs. 1.97 1.57 2.76 1.97 2.20 lbs.x2 $195.00 GCE-510 44.09 lbs. 3.15 1.97 3.94 3.15 6.61 lbs.x2 $365.00 Magnetic Holder Application: Wide range of uses; especially for holding small workpieces and keeping on in cutting V-Block Vise V-Block Vise available in the following sizes: Holding Dimension Weight Power GMH-26S 22.05 lbs. 1.02X1.02X0.98 0.24 lbs. $35.00 GMH-60S 44.09 lbs. 2.36X1.02X0.98 0.55 lbs. $42.00 GMH-30R 33.07 lbs. 1.18X0.98 0.24 lbs. $24.00 GMH-40R 66.14 lbs. 1.57X1.18 0.53 lbs. $35.00 GMH-50R 110.23 lbs. 1.97X1.57 1.10 lbs. $50.00 GMH-10H 6.61 lbs. 0.39X0.31 0.01 lbs. $7.50 GMH-18H 11.02 lbs. 0.71X0.31 0.04 lbs. $9.00 GMH-25H 19.84 lbs. 0.98X0.39 0.09 lbs. $25.00 GMH-10F 6.61 lbs. 0.39X0.31 0.01 lbs. $8.00 GMH-18F 11.02 lbs. 0.71X0.31 0.04 lbs. $10.00 GMH-25F 19.84 lbs. 0.98X0.39 0.09 lbs. $15.00 HARIG Spin-Indexer 122-100 (Manual) $1340.00 Sturdy and dimensionally stable cast iron housing Large preloaded ball bearings are durable and accurate - ideal for motorization 5C collet holder ground in assembly to under 0.0001 runout 24 division index plate with precision index pin locks in every 15 degrees to ± 30 sec. Draw sleeve for quick setup of collets and accessories Extended base for minimal defl ection even with heavier parts 1/4" diameter mounting hole on top of housing for diamond dresser Mounting holes on base of unit for use with Harig accessories Crank handle easily removed for motorized setup Unique design allows for mounting of variable speed motor in forward or rearward position Full repair service and replacement parts available Specification: Collet 5C up to 1 Center Height 4 1/8 24 division indexing +/- 30 seconds Spindle runout 0.0001 HARIG HO-VEE System GRINDER & ACCESSORIES 120-100 (Motorized)$1,746.00 Spindle parallel to base 0.0002 in 6 Motor 1/15 horsepower 110VAC Weight 17 Lbs Harig precise adjustable riser v-block system plus traveling height gage offers numerous workholding applications. Use with the Basic V-Block to hold workpiece securely and accurately. Use with a Multi-6 V-Block for end fi nishing of punches, core pins, plugs and EDM electrodes. Standard 8 posts with 5 width included. capacity V-Mark III ALP.3 1/16 to 11/16 dia. $160.00 V-Mark IV ALP.4 1/16 to 1 / 8 dia. $195.00 V-Mark V ALP.5 1 / 2 to 3 1 / 2 dia. $865.00 5 Cluster V-Block Cluster V-Block Vise five position 1/16 to 11/16 dia. Also available in stainless steel Squareness and parallelism accuracy: 0.0002 L: 5 1 / 2 W: 1 3 / 4 H: 1 3 / 4 ALP5.6 $420.00 4 Cluster V-Block Cluster V-Block Vise four position 1/16 to 1 / 8 dia. Also available in stainless steel Squareness and parallelism accuracy: 0.0002 L: 6 3 / 4 W: 2 1 / 4 H: 2 1 / 4 ALP4.7 $510.00 ALP4.7S $960.00 (Stainless) Right-On Pin Grinder Holds and positions pins of diameters from 1/16 to 3/4 for cut off and grinding purposes. Grinding chatter is eliminated because of the firm 1 1 / 4 of linear pin grip. It is fast to use in either a horizontal or vertical position with the same ease and repeatability. This 3 point pressure system not only allows for better pin grip but also gives a straight in-line positioning method. ALP.PRG $495.00 page 53 Multi-6 V-Block :235-20 $690.00 6 x2 x1 3/4 height Has 6 V s with 1/2 diameter capacity Centers of V s : 0.875 apart For end fi nishing of multiple parts Can be used vertically or horizontally as a stand alone Hardened and ground to HO-VEE Riser tenths accuracy :235-100 $1144.00 Suburban Magna-Square Basic V-Block :235-10 $240.00 V-Block capacity holds parts up to 1 in diameter Quick setup Includes strap clamp Hardened and ground to tenths accuracy 10 Posts :235-40 $125.00 A versatile tool for layout, inspection and squaring operations on a surface grinder Combines the advantages of a Universal Right Angle Iron and a Permanent Magnetic Chuck Energize magnetic face by turning recessed control bar Can be placed on any side for work-holding Heavy support rib provides structural strength and a carrying handle Made from class 40 cast iron, stress relieved and annealed Tolerance: all faces and ends of the Magna-Square and ground fl at, square and parallel within 0.0003 Length Width Height Wt MAI-644 4 3/4 4 1/4 6 1/2 18 lbs $1,799.00

GRINDER & ACCESSORIES Belt Type Oil Skimmer / Tube Type Oil Skimmer HD-820 $380.00 HD-800 $380.00 KANETEC Electro Magnetic Chucks Horizontal pitch type (Can use with GRD-505 chuck controller) Nominal Watt Dim. KESL1020 4 X 8 26 $580.00 KESL1025 4 X 10 30 $650.00 KESL1325 5 X 10 28 $780.00 KESL1525 6 X 10 42 $750.00 KESL1530 6 X 12 45 $1,360.00 KESL1535 6 X 14 60 $1,725.00 KESL1540 6 X 16 66 $1,075.00 KESL1545 6 X 18 69 $1,497.00 KESL2040 8 X 16 80 $1,766.00 KESL2045 8 X 18 104 $1,978.00 KESL2050 8 X 20 127 $2,014.00 KESL2060 8 X 24 151 $2,600.00 HD-800 Oil Skimmer Cap. 4 Liter/ hour Dimension (LxBxH) 7.5 x4.0 x6.0 Skimmer Belt size h1: 8.86 h2: 4.92 h3: 3.54 Hose Size OD=0.87, Length=23.6 Power single phase AC 110/200V Weight 5.72 Lbs Timmer Included HD-820 Oil Skimmer Cap. 1 Liter/ hour Dimension (LxBxH) 6.1 x3.1 x7.0 Skimmer Belt size l1: 17.71 h2: 11.2 h3: 7.87 Hose Size OD=0.87, Length=5.90 Power single phase AC 110/200V Weight 3.3 Lbs Timmer Included Nominal Watt Dim. KESL2540 10 X 16 115 $1,848.00 KESL2545 10 X 18 127 $1,925.00 KESL2550 10 X 20 153 $2,671.00 KESL3060 12 X 24 175 $2,827.00 KESL3070 12 X 28 183 $3,228.00 KESL3090 12 X 36 273 $3,628.00 KESL4060 16 X 24 233 $4,385.00 KESL4065 16 X 26 253 $4,563.00 KESL4080 16 X 32 311 $5,342.00 KESL40100 16 X 40 400 $6,678.00 KESL4570 18 X 28 310 $5,320.00 KESL50100 20 X 40 575 $7,568.00 Gromax Micropitch Electro Magnetic Chucks Micropitch for small and thin works. Pole Pitch: 4mm (1+3) Chuck Controller (for Rectify & Demagnetize) GRD-510 33 lbs. $658.00 GRD-515 44 lbs. $945.00 GRD-505 Suitable for standard type of electric magnetic chucks. With current capacity of 5A; demagnetizing time is 6-15 seconds. Precisely adjust the magnetic force of electric magnetic chucks and indicate LED voltage. Suitable for any kind of electric magnetic chucks. GRD-505 GRD-510/515 Suitable for standard type of electric magnetic chucks. With current capacity of 10A and 15A; demagnetizing time is 6-15 seconds. Precisely adjust the magnetic force of electric magnetic chucks and indicate LED voltage and GRD-505/515 current. Suitable for any kind of electric magnetic chucks. GRD-520 Suitable for super powerful type of big electric magnetic chucks and could control 2 chucks at the same time. With current capacity of 20A; demagnetizing time is 8-15 seconds. Precisely adjust the magnetic force of electric GRD-520 magnetic chucks and indicate LED voltage and current. Attached fan inside for emitting heat. GRD-520 71 lbs. $1,495.00 Suitable for any kind of electric magnetic chucks. Input Voltage Output Dimension (inch) Net (single phase) Voltage Current L W H Wt. lbs GRD-505 AC 110/220V DC 0-100V 5A 7.87 5.39 4.80 8.00 $458 GRD-510 AC 110/220/ DC 0-120V 10A 5.91 12.99 10.24 33.00 $658 380/415/440V GRD-515 AC 220/380/ DC 0-120V 15A 5.91 12.99 10.24 44.00 $945 415/440V GRD-520 AC 220/380 DC 0-120V 20A 7.09 15.16 11.61 71.00 $1,495 415/440V 5C Punch Grinder 5-C Punch Grinder fits in any 5-C collet fixture. 1/16 to 7/8 dia. ALP.PG $280.00 GRD-505 8 lbs. $458.00 Rotary Micropitch Electro Magnetic Chucks Micropitch for small and thin works. Pole Pitch: 4mm (1+3) Dimensions Watt. Weight (lb) GETW-1530 6 X12 75 $880.00 75.00 GETW-1535 6 X14 60 $1,025.00 86.00 GETW-1545 6 X18 60 $1,280.00 110.00 GETW-2040 8 X16 70 $1,350.00 130.00 GETW-2045 8 X18 65 $1,398.00 147.00 GETW-2050 8 X20 65 $1,517.00 167.00 GETW-2060 8 X24 60 $1,725.00 191.00 GETW-2550 10 X20 85 $1,865.00 202.00 GETW-3060 12 X24 130 $2,340.00 297.00 page 54 Dimensions K E Watt. Weight (lb) GETW-1530U 6 X12 145mm/ 418mm/16.4 13 82.00 $1200.00 GETW-1535U 6 X14 5.7 468mm/18.4 14 92.00 $1340.00 GETW-1545U 6 X18 568mm/22.4 18 113.00 $1590.00 E

Wheel Parallel Dresser E500 E250 GROMAX Vision Type Angle & Radius Dresser Accuracy Within 0.0002 Satisfaction Guarantee! GRINDER & ACCESSORIES GROMAX Rectangular Type Permanent Magnetic Chuck Super high quality!! : KMT Standard Pole E250 E500 Weight 18Lbs Weight 25Lbs $375.00 $440.00 E500 Circular housing ID: 3.66, Length: 4.33 E250.DS E250 Dresser Stick for E250 $170.00 E300.DS Dresser Stick for E300 $190.00 Stroke:2.36 Stroke:1.38 E300 E300 Weight 38Lbs $500.00 Fixed focus lens (3X) 1 Vernier markings for dressing angle Magnifi cation through hole in the spindle makes it possible for operator to see how to dress the form on the wheel Radius & angle can be done perfectly tangent Accuracy Within 0.0002 Weight TDE 11Lbs. $850.00 Length.............. 8-1/4 Height.............. 4 Diamond Dresser Swing Arm........... 180 DS-030 1/4"x2" $13.00 Max. Grinding Wheel.... 8 DIA. DS-040 1/8"x2" $9.00 Convex Radius........ 5/8 Concave Radius....... 1 Replacement Tangential Travel....... 0.89 Optical Lens Weight.............. 11 LBS. TDE-LNS $48.00/ea. Radius and Angle Dresser TDB ANTEATER 4 Poles per inch Rectangular type most suitable for grinding operation; Easy to operate handle; Clamping logs are provided; Handle can pivot outward appro. 30 o ; Magnetic effective area expanded KMT Size inch Weight Lbs KMT1018A 4X7 15 $340.00 KMT1025A 4X10 20 $470.00 KMT1030A 4X12 24 $550.00 KMT1325A 5X10 27 $520.00 KMT1530A 6X12 35 $570.00 KMT1535A 6X14 42 $650.00 KMT1540A 6X16 48 $680.00 KMT1545A 6X18 53 $880.00 KMT2035A 8X14 55 $900.00 KMT2040A 8X16 64 $1,020.00 KMT2045A 8X18 72 $1,090.00 KMT2050A 8X20 79 $1,250.00 KMT2060A 8X24 95 $1,340.00 KMT2550A 10X20 100 $1,640.00 KMT2560A 10X24 $2,040.00 KMT3060A 12X24 $2,440.00 GROMAX Thin and Circular Permanent Magnetic Chucks Matco Sine Dresser Sine angle absolutely accurate This fine precision -made unit dresses grinding wheels to any angle from 0 ~ 60 degrees with new smoothness and accuracy Center to center is 2 Center tolerance is 0.0004 Max. cross feed is 1 3/16 : 50A Weight 50A 4Lbs $189.00 Suburban Round Permanent Magnetic Chucks Standard pole- 1/4" poles & 1/8" separators produce deep flux lines for holding large and thick parts Use max-c-mag ceramic magnets provide 3 times the holding power of ordinary magnets Fine pole - 1/8" poles & 1/8" separators produce shallow flux lines for holding small and thin parts Wt TDB 29Lbs $620.00 Positive setting of the diamond to absolute center with the special gage included with the dresser.; Simple, fast, accurate radius setting; no height gage or other set-up aids required. Radius is set on the grinder by measuring over the two pins or by inserting a gage block, as shown, for direct reading. Inside or outside radius is determined simply by sliding the dowel pin to the right for concave and to the left for convex.; 4x90 o graduation in full 360 o circle. 6 minute vernier reading. Chrome plated.; One push-pull type knob for radius and angle control and for safer and faster operations.; Accuracy. Extremely close tolerances are held in the manufacture of this tool, assured by hardening and precision grinding of all critical parts. Ways are chrome hardened.; Economy. Set-up and dressing time reduced to a bare minimum due to simplicity. Maximum wheel diameter standard 10 Internal radii 5/8 ~ 1-5/8 With rat - tail adapter 1/32 ~ 1-5/8 External radii. 0~1-5/8 Height from base to center 4-3/32 Tangent travel, Either side of center 1-5/8 Diamond dresser $25.00 DS-010( 0.4"x3.15"/.2CT) Fine Pole: Dia Wt (lbs) RMC-6FP 6 18 $1,182.00 RMC-8FP 8 26 $1,534.00 RMC-10FP 10 43 $2,062.00 RMC-12FP 12 $2,888.00 Standard Pole: Dia Wt (lbs) RMC-5 5 15 $611.00 RMC-6 6 17 $942.00 RMC-9 9 36 $1,665.00 RMC-10 10 $1,718.00 RMC-12 12 60 $2,409.00 RMC-15 15 $4,699.00 RMC-16 16 96 $4,821.00 page 55 THIN AND CIRCULAR Pole Pitch: 2.5mm (1+1.5) Thickness H=50mm (1.97 ) DIameter Wt (lb) GMW-160R 160mm/ 6.30 $1050.00 18.00 GMW-200R 200mm/ 7.87 $1350.00 29.00 GMW-250R 250mm/ 9.84 $1890.00 47.00 GMW-300R 300mm/ 11.81 $2560.00 74.00 KANETEC Thin and Circular Type Magnetic Chuck RMCW-25 SHOWN Dia. RMCW-6 2 $741.000 RMCW-10 4 $826.000 RMCW-13 5 $998.00 RMCW-16 6 $1,256.00 RMCW-20 8 $1,554.00 RMCW-25 10 $2,344.00 RMCW-30 12 $3,104.00 RMCW-40 16 $7,000.00 RMCW-50 20 $9,754.00 RMCW-60 24 $12,348.00

GRINDER & ACCESSORIES KANETEC 3 Face Attractive Permanent Magnetic Mini Chuck MMW-3F70A SHOWN Dimension Holding Pole Pitch Power MMW-3F50A 2.2 X4.6 132 LBF 1.5 (0.5+1.0) $840.00 MMW-3F70A 2.8 X4.6 220 LBF 1.5 (0.5+1.0) $997.00 KANETEC Magnetic V-Block GROMAX Motor ER Collet Punch Formers PF650M has stronger structure leading lasting durability. Motorized function prevent human fatigue when processing With ER collets, the flexible range of collet is 1mm Capable collet clamping range: Min Dia. 2mm, Max. Dia. 26mm PF650 can rapidly clamping the work piece and achieving higher stability during processing, no need to adjust the center accuracy. Adopting high precision doubl e bearings in it s structure to achieve higher accuracy, rigidity and stability. This model is compatible with various ER collets such as ER20, ER32, ER40 etc KMV-125 SHOWN Dimension Holding Power KMV-50D 2 X3 X2 33 LBF $381.00 KMV-80D 2 X4 X2 44 LBF $519.00 KMV-125C 2 X6 X4 51 LBF $738.00 GROMAX Chamfering & Deburring Machine Simplified operation Easy to be bevelled for any length made of steel, cast iron, nonferrous metals, plastics, acrylic, etc. GT-500A: With exchangeable carbide inserts makes cutting tools can be changed easily GT-500BR: The deburring processing is based on the principles of surface milling machine. The finish of the deburred surface is like the workpiece fi nish of the surface mill GT-500B: Can bevel or chamfer on tapered wheel and fl ange heat treated parts Extra Grinding Wheel GT500B-GW $21.00 GT-600A: Can debur both soft and rigid materials with sand cloth roller SDK.GXX Extra Sanding Disc $15.00 Ea. Grits: 24,36,40,50,60,80,120 Receive 10% discount when order 10 or more GT-500A1 (110V) GT-500B1 (110V) GT-500BR1 (110V) GT-600A GT-500A2 (220V) GT-500B2 (220V) GT-500BR2 (220V) Space Requirement 19.7 x12.6 19.7 x17.3 19.7 x8.7 13.0 x16.1 Weight 66.1 Lbs. 77.2 Lbs. 77.2 Lbs. 55.1 Lbs. Voltage 3 220V or 1 110V/220V 50Hz/60Hz Motor Output 1 HP Speed 3500 rpm Length of Guide Rails 19.7 19.7 19.7 12.6 Height of Bevel 0~0.12 0~0.08 0~0.12 0~0.12 Bevel Angle 15 ~45 changeable 45 45 45 $670.00 $640.00 $750.00 $495.00 C&R Chamfering Machine Corner and Radius camfering NE W!!!! Space Requirement Weight Voltage Motor Output Speed GT-500AQ1 (110V) GT-500AQ2 (220V) 19.7 x12.6 66.1 Lbs. 3 220V or 1 110V/220V 50Hz/60Hz 1 HP 3500 rpm Length of Guide Rails 19.7 Height of Bevel 0~0.12 Bevel Angle 15 ~45 changeable $980.00 page 56 Main Parameters: Center Height Rotational Accuracy ER Collet Spec. With ER Collets, the fl exible range of collet is 1 mm. Clamping under 4 mm apply ER16 Collet. PFDM can rapidly clamp the workpiece and achieving higher stability during processing, no need to adjust the center accuracy. This model is compatible with various ER collets such as ER16, ER32, ER40 etc Precision Rotational Accuracy Air Grinder 85+0.5mm 0.003mm Voltage RPM WT (kg) 17 $1740.00 200V RPM PF650M-SER20-110V 3,4,6,8,10 110V 50-550 PF650M-SER20-220V PF650M-SER32-110V 4,8,12,16,20 110V 18 $1740.00 PF650M-SER32-220V 200V PF650M-SER40-110V 6,10,16,20,25 110V 19 $1740.00 PF650M-SER40-220V 200V GROMAX Motor ER Collet Punch Formers Main Parameters: Center Height ER Collet Spec. 80-81mm 0.003mm Voltage RPM WT (kg) 8.2 $1740.00 200V RPM PFDM-ER16-110V 2,3,4,6,8 110V 50-300 PFDM-ER16-220V PFDM-ER32-110V 4,8,12,16,20 110V 9.2 $1740.00 PFDM-ER32-220V 200V PFDM-ER40-110V 6,10,16,20,25 110V 10 $1740.00 PFDM-ER40-220V 200V

GROMAX Punch Formers Big Punch Former FC-900 Adaptable on surface grinder above 1.27 in 2 to clamp punches within 2-3/4 for grinding various shapes V-block with fine tuning function can fix workpieces steadily and accurately Max. clamping dia. is 2-3/4 Excellent Quality with Affordable! Accuracy within 0.0002 Satisfaction Guarantee FC-350 with 30mm (1.18 ) through hole FC-350 shown FC350/450 One piece body construction Hardened tool steel throughout Single screw locks v-block in places Revolving type handle for easy rotation Concave & convex radius angular dressing of grinding wheels Standard Accessories: Dresser Arm Allen Keys Fitted Case Optional Accessories: FC-350 Angle Dresser (FC.ANGLE $93.00) FC-350/FC-450 Lock Pin (FC.LPIN $40.00) Diamond Dresser FC-450 with oscillating v-block for tangent dressing Extra Dresser Arm FC.ARM $80.00 Angle Dresser (DS-020 1/2"x2" /.35CT $30.00) FC-350 / FC-450 Max. Diameter Workpiece 1-1/4 Height To Center line 3 Dial Graduations 360 o in 1 o Increments Index Plate 24 Divisions V-Block 1 1/4 Roundness 0.0001 Parallelism & Squareness 0.0002 in 2 Hardness HRC 60 o Grinding wheel Grinding wheel Punch forming angular dressing radius dressing FC-900 shown FC-900 Max. Clamping Dia. 2-3/4 in V-Slot Travel of V-Block 1-3/8 Quantity of Tooth 24 Accuracy of Disk 15 5 FC-450 shown Wt. FC-900 55Lbs $3,100.00 FC-450 24Lbs $1010.00 FC-350 23Lbs $940.00 GROMAX Wheel Dresser TDC-TW $790.00 Diamond dresser DS-010( 0.4 x3.15"/.2ct) $25.00 The wheel dresser can dress 2 angles tangent to a radius in one continuous motion with.0001 (0.002mm) accuracy The wheel dresser with a micrometer feed 1 3/16 (38mm) travel. Specification: Extremely accurate: dress 2 angles tangent to a radius in one continuous motion to within 0.0001 Fast and easy setups: only tools needed are a micrometer and a wrench Setup to dress 2 angles takes less than 15 seconds. 1 radius plus 2 angles in about 3 minutes Dressing capacity up to 8 wheel Range of convex radii 0 ~ 1.500 concave radii 0.030 ~ 1.500 Made of hardened & ground tool steel Height to center of diamond 6 1/2 Overall height: 7 Base dimensions: 4 3/4 x 3 1/2 x 1 1/4 Weight: 20 Lbs These are some of the forms obtainable with fluid motion dresser GROMAX Duplex Dresser Weight TDD 11Lbs $480.00 Diamond dresser 1/4"x2"/.2CT DS-030 $13.00 Dress Both Sides Of A Grinding Wheel Precisely & Simultaneously.; Made Of Hardened Tool Steel HRC 60. Specification: Max. Width Max. Dressing Max. Dressing Graduation Of Wheel Depth Width 1-9/16 1-9/16 0.0079 0.001 GRIND WHEEL MIN. MAX. 0.2mm : TDC-TW 40mm GROMAX Precision Electrode Former FC750 with 3R Manual Chuck (3R-600.23-S) One piece body construction; Hardened tool steel throughout; 3R Manual Chuck 3R-600.28-S in places; Revolving type handle for easy rotation. 0.02mm/DIV ER Collet Dividing Punch Grinder Having a ER32 as a main body, the ER Collet Dividing Punch Grinder has total of 7 collets from 0.16, 0.24, 0.31, 0.39, 0.47, 0.63, 0.79. With 24 divisions, this punch grinder allows positioning in every 15 10 seconds accuracy. If processing is below 0.24, use the ER16 connection. The collets are from dia. 0.04 to 0.39. GRINDER & ACCESSORIES Weight FC350-ER 23 Lbs. $920.00 (include 7 collets) The base can be selected as a sine plate base. It is good for sine angle use. Sine Plate for N.W. 6.61 lbs. Punch Former L X W X H: 4.33 X 3.27 X 2.16 FC350-SER $1045.00 Center to center: 2 N.W. 29.76 lbs. FC350-SP $180.00 3 Jaws Punch Grinder Rotary Wheel Dresser Prolongs Grinding Wheel s Life. Give True cutting Surface On a Grinding Wheel. Easy To Use & No Set-Up Down Time. Blaze-Dried Lacquer Surface Finish. Axis Part is Fixed With Shaft Bearing For High Speed Rotation. Ideal For CBN Or Diamond Wheel. Also Known As Braking Dresser. Weight: 12 Lbs. Weight RD 12Lbs $420.00 Extra Grinding Wheel RD#60 $12.00 each Motor Rotary Wheel Dresser Coolant Resistance 3 jaws hole dia=0.63 Min. clamping Dia=0.079 Max. clamping Dia=27.56 FC560 $945.00 18.7 Lbs page 57 FC750 $3,894.00 Weight 16 lbs Weight RDM 12Lbs $920.00 Length: 10.43 Height: 3.46 Diameter: 3.15 Extra Grinding Wheel RD#60 $15.00 each

GRINDER & ACCESSORIES Suburban Master-Grind Index Fixture Suburban Collet-Master Index Fixture Suburban Mini-Master Index Fixture Punch grinding, EDM Electrode forming, inspection as well as many other operation; V-Block & collet in one fixture; 72 position index plate 5 o every index accurate to +10 arc seconds; Built-in sine bar for setting angles between index locations; Horizontal or vertical V-block mounting; Spindle runs in two heavy duty 4 tapered roller bearings; Max. spindle runout 0.00005 square & parallel within 0.0002 ; fi tted case included. Wt. MG-5CV-S1 22 Lbs $2,573.00 Specification: Collet V-Block Through Height capacity capacity hole Base to center line any 5 C 1-5/8 dia 1-1/4 dia 3 Front-view with V-Block Optional Accessories: MG5-MD motor drive 1/15 HP, reversible, variable speed, 60 to 300 rpm.; Comes with mounting bracket motor pulley, drive belt & screws; can be mounted on either side of the index fixture. MG5-MD $804.00 Suburban Spin-Master Index Fixture Rear View Front view with V-block removed Runout on Hardened & ground spindle is 0.0005" T.I.R. 3-7/8" x 4-5/32" base ground parallel to spindle 2-5/16" spindle travel for flute grinding Index plate with 36 ground holes for direct indexing in 10 steps & graduation in 5 o increments 10 vernier holes for 1 o indexing Use standard 5C collets Height to centerline: 2-3/4" Sides of base ground parallel to spindle axis Through Hole: 1-1/4 Wt. SM-5C 15 Lbs $787.00 48 position index plate to allow a hard index every 7.5 o, Accurate to +45 seconds of arc; Uses standard 5C collets; Spindle runs in two sealed, preloaded ball bearings; Maximum spindle runout: 0.0001 ; Hardened steel base plate is ground square & parallel with spindle axis within 0.0002 ; Height to centerline: 3 5/8 ; Overall Height 5 9/16, overall length: 6 1/2, width : 4 13/32 Wt. Specification: Through Height CM-5C 9 Lbs $1172.00 hole Base to center line 1-1/8 dia 3-5/8 Optional Accessories: Face plate & V-Block Specification: Face Plate V-Block Diameter 6-1/2 1-3/8 dia Suburban Vacuum Chuck Optional Accessories: Vacuum Pumps Wt VCP-14-MM 32 $735.00 VCP-34-MM 54 $1145.00 Oilless, motor-mount, rotary vane design for maximum performance Internal muffl er & fi lters. Filters can be easily removed & replaced Sealed, lubricated-for-life bearings require virtually no maintenance. Pumps have built-in thermal overload protection Each model includes a support base, fi ttings & 6 feet of reinforced vacuum hose. Electric Motor CFM Free Air at 10 hg at 20 hg VCP-14-MM 1/4HP, 115V, 1Ph 3.10 1.30 VCP-12-MM 1/2HP, 115V/230V, 1Ph 4.90 2.00 VCP-34-MM 3/4HP, 115V/230V, 1Ph 6.20 2.70 page 58 Wt. CM-5C-FVB 15 Lbs $553.00 Provide an excellent means to hold non-magnetic workpieces for machining or grinding ideal for graphite, copper, aluminum, silver tungsten, carbide and other EDM electrodes. Three 1/4 NPT holes for mounting vacuum gage, relief valve & hose. Comes with vacuum gage, relief valve and 2 side rails. Length Width Height Recomm. Wt Pump VC-66-S1 6 6 2-1/4 1/4 HP 15 $648.00 VC-612-S2 12 6 2-1/4 1/2 HP 28 $885.00 VC-618-S2 18 6 2-1/4 1/2 HP 41 $1175.00 72 position index plate allows an index in every 5 5/8" through hole Uses standard ER-25 spring collets Spindle runs in two sealed preloaded bearings Maximum spindle runout 0.0002" Weight only 4 Lbs. Spindle can be secured for easy handling by stop button for easy tightening of collets Hardened steel base is ground square & parallel with spindle axis within 0.0002" Overall Height: 3 Center Height: 1-7/8 Wt. Through Hole: 5/8 Length: 5-1/8 MM-25R 4 Lbs $877.00 Suburban Master-View 14 Optical Comparator Quadra-check 2000 & ACU-RITE 0.0001 Reading Glass scales featured! MV-14-Q shown same as MV-14 but with better scales and 2-axis Quadracheck readout MV-14-Q $9,092.00 MV-14 $5,176.00 MV-14 shown Message display window All multipoint features (up to 50 stored) Preset and constructions Linear error correction Segmented linear error correction Versatile printouts 102 datum memory Storage of entire feature.0001 reading accuracy on x and y axis Glass is change resistant - will not change in size, shape, or density due to temperature variation over time 25 times finer accuracy than any competitor Repeatable accuracy Linear encoder continuously measures accurate positions Standard Accessories: 10x power lens Surface illumination Digital scales Overlay chart clips, etc. Optional Accessories: Description MV-14-20X 20X power lens $1425.00 MV-14-50X 50x power lens $1425.00 MV-14-BASE Cabinet base $968.00 MV-14-CTR Stage center $730.00 MV-14-VB V-block $318.00

GROMAX Center Punch Former Center Height without base: 85mm Center height with base: 109mm Indexer tooth quantity & accuracy: 24,15 0 +10 Live Center clamping range: 0-450mm Material SKS3, HRC60-62 Roundness: 0.002mm Parallelism: 0.002mm/ 100mm Squareness: 0.002mm/ 100mm A L Angle Wt kg GPFE150 375 0-150 360 0 20 $1800.00 GPFE250 475 0-250 360 0 23 $1860.00 GPFE350 575 0-350 360 0 26 $1920.00 GPFE450 675 0-450 360 0 29 $1980.00 Unit: mm Wheel Balancing Stand Max for 16 grinding wheel The wheel type balancing stand is made to last with endurance. This stand can be used for wheel up to 16 in diameter. For balancing, straightening and wheel alignment. No leveling, centering or set-up needed. Hardened & ground discs freely rotate on ball bearings. Weight WBS 37Lbs $366.00 Unit is adaptable to various length arbor (balancing arbor not included) Wheel Type 7-11/16 11-1/32 GROMAX Cross Worktable 9-1/16 GROMAX Mini Punch Grinder Grind punch from as tiny as 0.0196 (dia.) x 0.394 (length) LxWxH: 3 x3 x5 PG Wt. PGS 6Lbs $480.00 Unit size (WxLxH) (Lever excluded) 6-7/8 x10-3/16 x2-9/16 11-1/32 Mounting surface (RL x FB) (6-7/8 ) x (3-9/16 ) of head 1-3/4 max. Roller speed 60 Hz Roller driving motor 110V/single phase/25w 11-13/16 Accuracy/roundness/concentricity 0.00008 Examples: Same principle, same accuracy (0.0002 guarantee). The Mini-Type Punch Grinder is designed especially for tiny punch operation. GROMAX Punch Grinder Punch grinder can be put on the surface of grinding machine for round punches (0.12-1.18 ). It can be ground by putting among three rollers of punch grinder without checking the center. Wt PG 17Lbs $387.00 Accuracy of roller within 0.0002 while turning right or left Accuracy of point A within 0.0002 and point B within 0.00031 while turning. GROMAX Motor Punch Grinder Coolant Resistance Wt. PGM 25 Lbs $965.00 l D L d High accuracy cylindrical grinding work possible just by putting this economical unit on surface grinder No center alignment necessary, just put work on rollers Portable with singlehand, thus easily set on grinders With rollers motordriven, attention can be concentrated on table/ wheel feeds Work also can be formed in radius or taper D... 1/16-1.5 d... 0.02-1 L... Max 10-1/4 (Double roller... 10-1/4 ) l... 7/8 GRINDER & ACCESSORIES GROMAX 1 Tool Makers Vise Tool maker vise of mini type which can be put in a bigger vise to process the small and precise workpiece. Also it can be used in an E.D.M. machine and grinding machine. Squareness and parallelism within 0.0002. HRC 54~56 Harden. VI Material SK2 Length 2-9/16 Width 1 Jaw opening 13/16 Jaw height 3/8 Wt. VI 1 Lbs $58.00 GROMAX Tool Makers Vise Clamping slots & 2 3/8 holes in base provide easy fixing to angle plates; Ground V way; Square & parallel within.0002 Wt. V60 5 Lbs $67.00 Material: SK2; Length: 4 3/8 ; Width: 2 3/8 ; Jaw opening 2 5/16 ; Jaw height 1 ; HRC55~60 GROMAX Tool Makers Vise Made of hardened steel Precision ground: parallelism and squareness ±0.0002 on sides and bottom. On piece construction with a moveable jaw Positive downhold and quick positioning notches enable rapid set-up GROMAX Tool Makers Vise VI (Small) 1 Mini Vise Specification: (Taiwan) VB15 VB20 VB30 VB40 Length 3-15/16 5-1/2 7-1/16 8-7/8 Width 1-7/16 1-7/8 2-7/8 3-7/8 Jaw opening 1-9/16 2-9/16 3-9/16 4-15/16 Jaw depth 13/16 1 1-3/8 1-3/4 Weight 2 lbs 5 lbs 10 lbs 24 lbs $68.00 $80.00 $105.00 $198.00 Specification: GST47 GST614 GST820 GST1023 GST1031 Table 4 x7 6 x14 8 x20 10 x23.6 10 x31.5 Base 5 x4 10 x12 12 x15.7 15.7 x20 15.7 x20 Travel 2 x3 6 x6.9 7.8 x10 10 x12 10 x20 Height 4 5 6.3 8.3 8.3 Increment 0.0004 0.0008 0.0008 0.0008 0.0008 $630.00 $1050.00 $1450.00 $2,250.00 $2,560.00 Wheel Flange for 7 or 8 Wheel For KENT Grinders E100 $75.00/ea. E100K $225.00/ea. (63AHD) page 59 VD-20 VD-30 VD-40 Material SK2 SK2 SK2 Length 6-1/8 7-1/8 9-7/8 Width 1-7/8 2-15/16 3-7/8 Jaw opening 2-3/8 2-15/16 4-15/16 Jaw height 1 1-3/16 1-1/2 Hardness HRC56~58 HRC56~58 HRC56~58 N.W. 7LBS 13LBS 24LBS $145.00 $165.00 $265.00

GRINDER & ACCESSORIES GROMAX Sine Vise Compound angles easily and quickly set.; Adjustments up to 46 degrees. The vise parallel precision 0.0002 and vertical angles in 0.0008 ; Between centers equal 5 inch SV-20 SV-30 Material SK2 SK2 Length 5-1/2 7-1/16 Width 1-5/8 2-7/8 SV-20 $245.00 Jaw Opening 2-1/2 3-3/16 Jaw Height 3-1/32 3-1/32 SV-30 $315.00 Hardness HRC 52~56 HRC 52~56 Angle 0 0 ~46 0 0 0 ~46 0 Weight 7 LB 19 LB GROMAX Universal Vise Revolving 360 in horizontal plane and 45 in vertical plane; Aadaptable to precision grinding machine and boring machine for level and inclined face machining as well as boring at a certain degree of inclination; precision graduation for accurate reading GTV-2000 $790.00 Width of jaw 2.75 Max. opening of jaws 3.16 Depth of jaw 1.18 Overall dimensions 7.7 x4.0 x5.8 (LxWxH) Weight 28 Lbs. GROMAX Grade Sine Plate Made of hardened tool steel HRC 55~62; Roll to eliminate step in base plate; Two hardened & ground side rails & one locking strap included; Locking strap remains below the top surface; Tapped holes in top plate; Parallelism & squareness within 0.0002 0 ~60 capacity. (GT-66 With T-Slots) LxWxH Center Weight roll dist. GT-47 4 x 7 x 2.5 3 20 Lbs $259.00 GT-66 6 x 6 x 2.5 5 22 Lbs $284.00 GT-612 6 x 12 x 2.5 10 44 Lbs $645.00 GROMAX Compound Sine Plate LxWxH Lower Center roll dist Upper Center roll dist Wt lbs GT-C47 4 x7 x4 5 3 25 $570.00 GT-C66 6 x6 x4 5 5 27 $620.00 GT-C612 6 x12 x4 10 5 70 $1030.00 GROMAX Precision Mini Tilt & Swivel Vise Vise furnished complete with jig plate, which can be removed for grinding and milling. In addition, the swivel angle attachment may be removed for using as a plain vise.; Ideal for jig boring, jig grinding, precision grinding as well as milling and drilling operations. Wt. Tolerance: CL 8 Lbs $175.00 0.0004 graduation are furnished on both tilting and swiveling Width Jaw Jaw Jaw Opening Depth Height CL 2.75 0.625.78 3.72 page 60 : CL GROMAX 0 ~60 Angle Plate 0 ~60 adjustable angle by locking the hex screw on the bottom; Squareness 0.0002"; Angle accuracy 10"; HRC50~55 Dimensions Weight AP-1 1-13/16 x1-13/16 x4 3.8Lb $75.00 AP-2 1-3/16 x1-13/16 x4 2.8Lb $70.00 AP-3 1 x1-1/4 x3 1.5Lb $65.00 GROMAX Magnetic Angle Plate Easy to use (like a dine plate) On EDM grinders, mills and drills 0-50 0 adjustable angle Dimension LxWxH (3.5 x4.0 x1.8 ) Wt MAP 8Lbs $139.00 GROMAX Magnetic Sine Plate Standard 4 poles per inch; Removable On/Off switch; Side rails & rails LxWxH Center Chuck Weight roll dist. height 47M 4 x7 x4 3 1.6 25 Lbs $645.00 66M 6 x6 x4 5 1.6 27 Lbs $700.00 612M 6 x12 x4 5 1.6 70 Lbs $1075.00 GROMAX Compound Magnetic Sine Plates Weight 66M2-WAY 60 Lbs $1050.00 612M2-WAY 90 Lbs $1,650.00 : MAP Suburban Sine Vise Fea- tures: Provides a quick and accurate means of holding a workpiece at an angle for machining or inspection Square & parallel within 0.0002 & 0.0003 Angled center channel provides extra jaw capacity Solid, one piece body Locking strap included Made from steel hardened tp Rc 58-62 Movable jaw pulls into base at 45-60 deg. to insure maximum holding power and hold down force, eliminating tilting and lifting Dual 0.200 minute steps built into the gage roll allow setting small angles with standard gage blocks Dimensions Jaw Center Distance Cap. of Rolls SV-337 7-1/2 x3 x3-4-3/4 5 ±.0002 $823.00 5/8 SV-337-S1 7-1/2 x3 x3-4-3/4 5 ±.0002 $863.00 5/8 SV-411 11 x4 x4-5/8 7 10 ±.0002 $1,345.00 SV-411-S2 11 x4 x4-5/8 7 10 ±.0002 $1,394.00 SV-612 12 x6 x5-1/8 8 10 ±.0002 $2,305.00 SV-612-S2 12 x6 x5-1/8 8 10 ±.0002 $2,380.00 *S1 & S2 mean they are SineSet compatible, others are not Suburban Precision Vise & NC Vise V-411-NC & V-612-NC Vise shown Precision Vise V-411-S2 Shown Square & parallel within 0.0002 & 0.0003 Angled center channel provides extra jaw capacity Solid, one piece body Made from steel hardened tp Rc 58-62 Movable jaw pulls into base at 45-60 deg. to insure maximum holding power and hold down force, eliminating tilting and lifting NC s have bi-directional 11/16 keyways ground in bottom Dimensions V-225 5-5/8 x 2 x 2 3-1/4 $393.00 V-225-S0 5-5/8 x 2 x 2 3-1/4 $545.00 V-237 7-1/2 x 3 x 2-5/8 4-3/4 $503.00 V-237-J 7-1/2 x 3 x 2-5/8 5 $564.00 V-237-J-S1 7-1/2 x 3 x 2-5/8 5 $607.00 V-237-S1 7-1/2 x 3 x 2-5/8 4-3/4 $563.00 V-411 11 x 4 x 3 7 $876.00 V-411-S2 11 x 4 x 3 7 $928.00 V-612 12 x 6 x 3-7/16 8 $1,301.00 V-612-S2 12 x 6 x 3-7/16 8 $1,403.00 Precision NC Vices & Matched Pairs V-411-NC 11 x 4 x 3 7-1/2 $1,046.00 V-411-NC-M 11 x 4 x 3 7-1/2 $2,311.00 V-612-NC 12 x 6 x 3-7/16 8-1/2 $1,482.00 V-612-NC-M 12 x 6 x 3-7/16 8-1/2 $3,300.00 *S0, S1, S2 denote SineSet Compatible

GROMAX Rods Precision Cut-Off and Surface Grind Machine Cut off ejector pins and grind them to length in one set up. Fast, economic way to grind pins, rods, squares to lengths accurate to within.001. Depth mic. attachment lets you cut to desired length. V-groove clamping mechanism fits all sizes. Built in diamond dresser for easy dressing. Short pin fixture available. Please call for more information. Cut off precision.98 x 11.8 0.0004 Rod Size (w/o Small Pin Fitting OD 1mm~25mm Device) Shortest Rod (w/o Small Pin Fitting 60mm Device) Right angle precision.98 x 90 0.0004 Cut-off Sander Lamina 0.0039 x 7.1 / 1.25 T x Dia. / Hole Grinding sander WA46K x 0.39 x0.2 x 0.79 RPM 3600 rpm Motor 3/4 HP Machine Size 17 x 14 x 20 Wt. RPC 200 Lbs $3,560.00 The dimensions precision of cutting off the length of working piece are not subject to the effect of the difference of thickness of cuttingoff sander piece. During operation, the grinding sander may be micro adjusted and repaired without changing its dimensions. Dust / Mist Collector & Fume Exhauster Filter Dust Collector Covers a wide range of dust applications Filtration effi ciency of up to 99.9% on submicron particles Supplied with stack silencer and manual motor starter configurations and can be supplied with dust receptacles (optional) DST cabinet is a quick ship, plug and go model which does not include stock silencer CFM External Static Pressure (WG) Volt. (TEFC Fan Motor) HP 64 500 3.5 230/60/3 3/4 84 1231 5.0 230/60/3 3 Dry Cartridge Dust Collector Covers a wide rage of dust application, high intermittent duty air cleaning by an exclusive 2 stage fi lter cartridge Filter is cleaned automatically when the unit is shut down reducing the amount of maintenance and making fi lter life longer This 99.9% effi cient unit is well suited for all machining applications including graphite Standard with manual motor starter The DST VS is a quick ship, plug and go model CFM External Static Pressure (WG) Volt. (TEFC Fan Motor) HP VS550 550 4.25 230/60/3 1 VS1200 1243 4.80 230/60/3 3 VS1500 1525 3.00 230/60/3 5 Fume Exhauster GRINDER & ACCESSORIES Standard Accessories: Cabinet collector Motor starter Manual shaker Fan Standard Accessores: VS collector Auto-shake cleaning Motor starter Fan The tightness of belt may be automatically adjusted and controlled (the larger the resistance, the tighter the belt). CFM Volt. HP PT-1000 780 115/60/1 1.5 $8870.00 Small Unit Moves Easily Roll It Where It s Needed The rapid positioning rule is in the unit of 0.79 and provided with a micro rule (0 to 0.98 ) of which the zeroing point is the dimensions at the rapid positioning point. Accessories: RPC.CW Cut off Wheel $5.50 RPC.GW20M Grinding Wheel $21.00 RPC.DD Diamond Dresser $22.00 RPC.PIN Small Pin Fitting Divice $175.00 RPC.300MM Micro Meter (300mm) $418.00 RPC.500MM Micro Meter (500mm) $510.00 RPC.FLG Flange $44.00 RPC.BLT Belt $33.00 Small Pin Fitting Device The rapid chuck is used to hold the work piece in place, opening or closing it is very quick, and 0.04-0.98 is the same. When operation, a shaft with two tapered ends is used for transmission and characterized by high stability, low wearing rate and long life. page 61 MR. DEBURR 3 Cubic Feet Vibratory Deburring Machine De-burr, de-grease, clean & polish at the same time. Rust prohibiting alkyd enamel gloss gray fi nish Heavy gauge steel throughout all welded construction 6.5 cu.ft. available upon request Fluid recirculating system included: 7 gallon plastic container submersible pump, hook-up fi ttings, and inlet valve to adjust fl ow Specification: Inside Tank 31 x13 1/2 x13 (LxHxW) Motor 1HP 3450 RPM; 110v/ 60HZ/ single phase; 220V/ 3 phase upon request Lining All cast polyurethane; 90 durometer 1/2 in thickness 300 DB Discharge Ramp 22 from fl oor Weight $2,950.00 350 LB.

LATHE & ACCESSORIES GROMAX High Accuracy Second-Operation Machine 80 millionths spindle runout Fast lever collet chucking with single movement Hardened and precision ground special alloy steel bed ways Standard 5C collet closer The spindle is supported by 2 point preloaded precision angular contact ball bearings to absorb radial and axial forces. Spindle speed can be changed while the cutting Built-in coolant with sump and self draining oil pan Automatic driveshaft spindle brake Direct reading spindle speed indicator Tool Room Lathe Hardinge Compatible Spindle with Jaw Chucks 5 with Round 5C collets 1 1/6 with Hexagon 5C collets 7/8 with Square Chucks 3/4 with Step Chucks 1 1/16 ~ 6 Swing Over Bed 9 Double tool Cross Slide Travel 3 3/4 Turret Slide Travel 4 I.D. Turret Head 5/8 Spindle Speed Range 230 ~ 3500 rpm Motor 220V, 3 phase, 2speeds 1/2 HP Coolant Tank 12 L Machine Weight 10000 Lbs Machine Packing Dimentsion 75 x 33 x 68 Optional Accessories: 1. Extra double tool cross slide GS616.1 $1,450.00 2. Straight and taper turning slide GS616.2 $1,030.00 3. Vertical cut off slide GS616.3 $1,280.00 4. End working slide 5-1/2 GS616.4 $1,540.00 5. Chip and coolant shield GS616.5 $1,300.00 6. Compound slide GS616.6 $2,150.00 7. Screw feed tail stock GS616.7 $1,640.00 8. 6-Station Turret GS616.8 $2,800.00 6. Compound Slide GS616 $15,500.00 1. Double Tool Cross Slide 7. Handwheel Tailstock 8. Six-Station Turret GROMAX High Accuracy Tool Room Lathe Spindle runout 80 millionths Motor 1.0/0.5 HP 2 speed Max. swing over bed 11 Spindle speed 130~3000 rpm Spindle drive motor 1HP, 2 speed 220V Spindle capacity: w/ round 5C collets 1 1/16 w/ hex. 5C collets 7/8 w/ SQU. 3/4 w/ step chucks 6 w/ jaw 5 w/ expanding chucks 3 Spindle nose taper 10 Distance between center 18 Swing over carriage 9 Swing over cross slide 6 Cross slide travel 6 Compound slide travel 3 Tail stock spindle taper MT#2 English/ metric dual dial Quick change gear box with 36 range Set of 5 change gear Quick-action compound slide for threading Preloaded ball bearing lead screw Hardened precision ground spindle with taper nose, 1 1/16 collet capacity Independent electric control feed for carriage and cross slide Special alloy steel bed ways hardened & precision ground GT618 $26,900.00 Optional Accessories: Vertical cut off slide GT618.1 $1,090.00 Steady rest GT618.6 $640.00 5C emergency collet GT618.2 $52.00 Follow rest GT618.7 $448.00 Taper turning attachment GT618.3 $2,030.00 5 3 jaw chuck GT618.8 $540.00 Chip and coolant shield GT618.4 $1,520.00 MT#2 precision life center GT618.9 $520.00 Tapped face plate GT618.5 $285.00 Fixture plate for 5 3 jaw chuck GT618.10 $218.00 Fixture plate for 6 3 jaw chuck GT618.11 $230.00 page 62 Headstock & Gear Box Dual Dial On Cross Slide Dual Dial On Toll Post Slide

LATHE & ACCESSORIES GROMAX Super Precision- High Speed Lathe GLA-1744/GLA-1767 GLA-2280/GLA-22120 MADE IN TAIWAN MADE IN TAIWAN Large 2-1/4 spindle bore is supported by 3 precision bearings featuring D1-6 Camlock mount (GLA1744 & 1767) Large 4-1/16 spindle bore is supported by 3 precision bearings featuring D1-11 Camlock mount (GLA2280 & 22120) Induction hardened ground bedways & gears Enclosed gear box Specifications GLA-1744 GLA-1767 GLA-2280 GLA-22120 Thread & Feed Bed Headstock Tailstock Bed Width 12 15 3/4 Total Travel of Top Slide 4 3/4 7 1/2 Swing over Bed 17 22 Swing over Cross Slide 10 3/4 13 Swing over Gap 24 30 7/8 Distance between Centers 44 67 78 3/4 118 Number of Spindle Speeds 12 steps 12 steps Spindle Bore 2 1/4 4 1/16 Type of Spindle Nose D1-6 D1-11 Taper of Spindle Bore & Center MT No.6 x No.4 MT No.7 x No.5 Range of Spindle Speeds 35~2000 rpm (12 steps) 13~1200 rpm (12 steps) Cross Slide Travel 8 5/8 Compound Rest Travel 7 Max. Tool Size 1 Square Dia. and Pitch of Lead Screw Ø35mm 6mm/pitch or 4TPI Ø45mm 6mm/pitch or 4TPI Range of Inch Threads 2-72 TPI (44 kinds) 2-72 TPI (44 kinds) Range of Metric Threads 0.2-14mm (39 kinds) 0.2-14mm (39 kinds) Range of Longitudinal Feed 0.0012-0.034 (36 steps) 0.0014 ~0.039 (36 steps) Range of Cross Feed 0.0006-0.017 (36 steps) 0.0007 ~0.020 (36 steps) Tailstock Quill Diameter 2 3/8 2 15/16 Travel 6 7 Taper of Tailstock quill MT4 MT5 Motor Main Drive Motor 7 1/2 HP 10 HP Coolant Pump Motor 1/8 HP 1/8 HP Power 220V, 3 phase 220V, 3 phase Net Weight 3520 lbs. 3960 lbs. 7715 lbs. 9260 lbs. Packing (Length x Width x Height) 90 x 42 x 59 114 x 42 x 59 138 x 59 x 71 177 x 59 x 71 $18,400.00 $19,800.00 $28,200.00 $30,900.00 Atlas Workholding King Bore Oil Country 3 Jaw Universal Chuck Series 332EX Extra Heavy-DutySizes 20 thru 48 Sizes 20 to 48 Forged Steel BodyExtra Heavy Duty American Standard, Hard Top and Master Jaws.Gripping surfaces serrated for more holding powerlarge Thru-Holes StandardHardened Scroll Gear for long lifealso available with D1 camlock mounting Chuck Size No. Mount Thru Hole Max rpm s Approx. Weight 20 2033-2A11EX A2-11 6.75 1100 475 lbs $10,900.00 20 2033-2A15EX A2-15 8.00 1100 450 lbs $10,900.00 24 2433-2A15EX A2-15 10.75 850 695 lbs $13,900.00 24 2433-2A20EX A2-20 12.50 850 670 lbs $13,900.00 28 2833-2A15EX A2-15 10.75 750 890 lbs $18,900.00 28 2833-2A20EX A2-20 12.50 750 870 lbs $18,900.00 32 3233-2A15EX A2-15 10.75 600 1290 lbs $21,900.00 32 3233-2A20EX A2-20 14.50* 600 1270 lbs $21,900.00 36 3633-2A20EX A2-20 14.50* 550 1610 lbs $28,900.00 40 4033-2A20EX A2-20 14.50 500 1975 lbs $35,900.00 40 4033-2A28EX A2-28 18.50 500 1910 lbs $35,900.00 * Optional 16 thru-hole Consult factory for 48 and larger sizes page 63 No. B1 O.D. GLA-1744/GLA-1767 Standard Accessories: 10 3 Jaw Chuck 12 4 Jaw Chuck Steady/Fellow Rest Inverter Controlled Motor Full Length Splash Guard Coolant System Gap Bed Face Plate Tool Box with Tools 4 Way Tool Holder GLA-2280/GLA-22120 Standard Accessories: 15 3 Jaw Chuck 20 4 Jaw Chuck Steady/Fellow Rest 4 Way Tool Holder Full Length Splash Guard Coolant System Gap Bed Face Plate Tool Box with Tools Rapid Travel Optional Accessories (GLA-1744/GLA-1767) GLA17.1 Micro Bed Stop $235.00 GLA17.2 Taper Attachment $1,353.00 GLA17.3 Taper Attachment Installation $441.00 GLA17.4 Lever Type 5C Collet Closer JFK $882.00 GLA17.5 Import Collet Closer $665.00 GLA17.6 Sargon Digital Read-Out-44 $1,671.00 GLA17.7 Sargon Digital Read-Out-65 $1,994.00 GLA17.8 Sony Digital Read-Out-43 $2,918.00 GLA17.9 Sony Digital Read-Out-67 $3,324.00 GLA17.10 D.R.O. Installation $294.00 GLA17.11 Quick Change Tool Holder (Made in USA) $412.00 GLA17.12 Import Quick Change Tool Holder $441.00 Optional Accessories (GLA-2280/GLA-22120) GLA22.1 Micro Bed Stop $294.00 GLA22.2 Taper Attachment $1,765.00 GLA22.3 Taper Attachment Installation $441.00 GLA22.4 Sargon Digital Read-Out-80 $3,118.00 GLA22.5 Sony Digital Read-Out-80 $3,118.00 GLA22.6 D.R.O. Installation $441.00 GLA22.7 Quick Change Tool Holder (Made in USA) $759.00 GLA22.8 Import Quick Change Tool Holder $918.00 GLA22.9 120 Digital Read-Out Systems P.O.R. Mount Type B3 Mount Recess B4 Trhy Hole B6 Mounting Bolt Radius B15 Body Width J10 Master Jaw Length J11 Top Jaw Width J12 Top Jaw Height 2033-2A11EX 19.68 A2-11 7.75 6.75 4.625 6.34 6.50 2.36 3.27 2033-2A15EX 19.68 A1-15 11.25 8.00 4.875 6.34 6.50 2.36 3.27 2433-2A15EX 24.80 A2-15 11.25 10.75 6.50 6.61 6.50 2.36 3.27 2433-2A20EX 24.80 A1-20 16.25 12.50 7.25 6.69 6.50 2.36 3.27 2833-2A15EX 27.56 A2-15 11.25 10.75 6.50 6.81 8.50 2.95 3.62 2833-2A20EX 27.56 A1-20 16.25 12.50 7.25 6.89 8.50 2.95 3.62 3233-2A15EX 31.49 A2-15 11.25 10.75 6.50 7.01 9.84 2.95 3.62 3233-2A20EX 31.49 A2-20 16.25 14.50 * 9.175 7.09 8.50 2.95 3.62 3633-2A20EX 35.43 A2-20 16.25 14.50 * 9.175 7.48 9.84 2.95 3.62 4033-2A20EX 39.37 A2-20 16.25 14.50 9.175 7.48 9.84 2.95 3.62 4033-2A28EX 39.37 A2-28 23.00 18.50 12.750 7.48 9.84 2.95 3.62

LATHE & ACCESSORIES Lux-Matter Precision Gear Head Engine Lathe LUX1340G LUX1340G MADE IN TAIWAN LUX1340G / LUX1440G ASA D1-4 spindle camlock nose with 1-9/16" spindle bore 3HP 220V 3 phase motor Bedways are hardened and ground with removable gap Full length splash guard w/built in coolant system Quick action foot brake system and pull out chip try Quick change total close gearbox for inch/ metric threading Spindle and headstock gears all hardened and precision ground LUX1340G / LUX1440G Standard Accessories: Main Motor 3 HP (LUX1340G) LUX1440G Capacities Swing over bed 13 14 Swing over cross slide 8 9 Distance betweeen center 40 40 Swing in gap 20 21 Width of bed 8 10 Head Stock Spindle nose ASA D1-4 Spindle bore 1 9/16 Taper of spindle MT#5 Spindle speeds 42~2000rpm / 16 steps Threads & Inch threads 4-112T.P.I. (40 kinds) Feed Metric threads 0.25~6.0 (22 kinds) Module pitch threads 0.25~3.0M.P. (otional) D.P. Threads 8~112 D.P.(optional) Longitudinal feed range 0.002 ~0.04 IPR Cross feed range 0.001 ~0.02 IPR Leadscrew diameter / pitch 1 /4T.P.I Carriage Cross slide travel 8 1/16 Compound slide travel 3 3/4 4-way toolpost capacity 3/4 x 3/4 Tailstock Center taper MT#3 Quill travel / dia. 4 1/4 / 1 1/2 Power Main Motor 3HP/ 1.5HP, 3 phase Coolant pump 1/8HP Machine Dimensions Machine size (LxWxH) 74 x28 x58 75 x30 x58 Packing Size (LxWxH) 76 x29 x60 78 x30 x60 Net/ Gross Wt. Lbs 1900 / 2300lbs 2500 / 2900lbs $9,800.00 $11,500.00 Atlas Workholding Super Thin Square Chucks page 64 Stand with Chip Tray (LUX1440G) One-Piece Cast Iron Stand Foot Brake Back Plate (D1-4) MT#3 Center Reducing Sleeve Threading Dial Tool Kit & Box 4 Way Tool Post Complete Electrical Equipment Instruction Manual & Parts List Gap Bed Coolant System 3-Jaw Chuck 6 4-Jaw Chuck 8 Face Plate 12 Steady Rest 4 (LUX1340G) Steady Rest 4-1/2 (LUX1440G) Follow Rest Full Length Splash Guard LUX1440G Optional Accessories (LUX1340G): LUX13.1 Micrometer Carriage Bed Stop $380.00 LUX13.2 Taper Attachment $1,230.00 LUX13.3 Taper Attachment Installation $300.00 LUX13.4 Sargon Digital Read-Out POR LUX13.5 Sony Digital Read-Out POR LUX13.6 D.R.O. Installation $400.00 LUX13.7 Quick Change Tool Holder (USA) POR LUX13.8 Import Quick Change Tool Holder POR LUX-MATTER PRECISION LATHES SERIES (Made in Taiwan): Precision Tool Room Lathes Geared Head LUX1340G 12 SPEED, D1-4 1 9/16 BORE 3HP, 220V/3 PHASE $call LUX1440G 12 SPEED, D1-4 1 9/16 BORE 3HP, 220V/3 PHASE $call LUX1640T 12SPEED, D1-6, 2 BORE, 5HP, 220V / 440V, 3PH, Taiwan $call LUX1660T 12SPEED, D1-6, 2 BORE, 5HP, 220V / 440V, 3PH, Taiwan $call Standard Equipment Includes: Steady Rest, Follow Rest, 3&4 Jaw Chucks, 4 Way Tool Post, Face Plate, Coolant System, Reducing Headstock Sleeve, Rapid Braking Center, One Piece Stand with Chip Tray, Rear Splash Guard, Gap Bed Threading Dial, Inch. Metric Gear Box (No Change Gears Required) Universal scroll chuck design End-surface clamping design enables fast efficient mounting of several chucks to a worktable Super thin design allows greater Z-axis machining Elongated slots allows fast and easy positioning on worktable, simply use standard T-bolts, versus mounting connecting plates required by conventional chucks Milled key-slots on the base plate allows accurate quick changing of the chucks Ideal for pallet applications, Standard Mills, Vertical Machining Centers, Angle Plates, Tombstones, and Grinding Machines. American standard, hard top and master jaws Size Approx Gripping (inch) Weight External Internal Min. Max. Min. Max. MCA6 6 31 lbs. 16 5.04 2.17 5.04 $995.00 MCA8 8 46 lbs. 20 6.38 2.44 6.34 $1,375.00 MCA10 10 70 lbs. 24 7.78 2.83 7.78 $1,795.00 MCA12 12 124 lbs. 39 10.45 3.54 10.45 $2,350.00 A B C D E F G H J K L M N P Q R S MCA6 8.46 2.24.71 5.12 1.57.20 4-M10 2.68 1.02 1.54 12mm* 5.67 6.50 5.67 6.50 5.2.63 MCA8 9.84 2.56.79 6.30 2.17.20 4-M12 3.23 1.10 1.69 14mm* 6.85 7.87 6.85 7.87 6.54.63 MCA10 12.20 2.83.87 7.87 2.76.24 4-M14 3.66 1.26 1.97 16mm* 8.58 9.84 8.58 9.84 8.12.71 MCA12 14.96 3.35.98 10.24 3.94.26 4-M16 4.16 1.57 2.20 20mm* 10.79 12.20 10.79 12.20 10.62.87 Unit: Inch * Square Drive

Precision Gear Head Bench Lathe MADE IN CHINA (China) YCL1340GH $4,650.00 Specification: YCL-1340GH Swing over bed 13 Distance between centers 40 Swing over cross side 8 Swing over gap 18 3/4 Width of gap 7 7/8 Length of bed 65 1/4 Width of bed 7 3/8 Hole through spindle 1 3/8 Tailstock spindle travel 3 3/4 Cross slide travel 6 7/8 Top Tool slide travel 3 3/4 Saddle travel 35 1/4 Taper of spindle taper f MT #5 D1-4 center Mores taper Tailstock taper of center MT#3 Range of spindle speeds 8 speeds 70~2000rpm Lead screw diameter 7/8 Feed rod diameter 3/4 Threads per inch of lead 40 TPI screw Thread can be cut 4-112 TPI Main spindle motor 2HP/ 1.5 kw Net weight 1100LBS YCL1236GH 12 x36 9 Speeds 1 1/2HP, 110V/220V,1 YCL1640 YCL1660 16 x40 D1-6 16 x60 D1-6 Precision Medium Duty Live Centers Made of hardened steel and ground for high accuracy. Precision high quality bearings. Lathe bed is constructed of high tensile strength cast iron, rigid structure with hardened and ground ways Precision main spindle loaded on high quality precision bearings 8 speed headstock with 70 to 2000 rpm. Speed changes by head stock quick change lever action Permanently fi ltered oil headstock bath provided clean running oil for long life of bearings & gears 2HP motor Manufacture included heavy duty fl oor stands, along with full length splash guard as standard equipment Standard Accessories: Motor pully Center (M.T.No3) Change gear Open end wrench Oil gun Back plate for 3 jaw chuck for 6 Back plate for 4 jaw chuck for 8 4 way tool post. 3-jaw scroll chuck 160mm (6") Follow rest 4 jaw independent chuck 200mm (8") Face plate 300mm (11-3/4") Center sleeve (MT No.5) Tool box Steady rest Splash guard Floor stand Screw driver Allen wrench Full Size Chipguard 12 Speeds 7 1/2HP 2 5/16 BORE 12 Speeds 7 1/2HP 2 5/16 BORE $4,100.00 $13,500.00 $13,800.00 LATHE & ACCESSORIES Precision Gear Head Engine Lathe MADE IN CHINA Hardened and ground bed ways and spined shafts in headstock 16 speeds all geared headstock 45-1800 rpm 3HP 3-phase 220V motor Foot brake giving rapid braking and built in coolant system Emergency stop button equipped on the front of headstock Open type chip pan easily to remove chips Jog button for easy engagement and inching spindle Extra safety switch shuts down machine (China) entirely for changing belt or gear for threading cutting YCL1440GH Built in full size splash guard and $6,900.00 lamp for worker s convenience Standard Accessories: Change gear 3-Jaw 6" chuck Chip pan 4-way tool post Follow rest D1-4 back plate Coolant system Reduction sleeve Dead center Work light 4 jaw chuck 8 Face plate 10 Steady rest Full length splash guard Chasing dial indicator Capacities: Swing over bed 14" Swing over carriage 9" Distance between centers 40" Swing over gap 20" Width of bed 8" Leadscrew Diameter of leadscrew 7/8" Pitch threads of leadscrew 8 TPI Power: Main motor 3HP Coolant pump 1/8HP Threading & Metric pitch threads 0.45-7.5 mm (22 kinds) feeding: Whit-worth threads 4-112 TPI (44 kinds) Range of longitudinal feeds 0.0012-0.0294" /rev Range of cross feeds 0.0003-0.01" / rev Main spindle: Dia. of Spindle thru hole 1-1/2" Number of Spindle speeds 16 Taper of spindle M.T. #5 Spindle speed (16) 45-1800rpm Spindle nose D1-4 Tailstock Travel of tailstock quill 5" Diameter of tailstock quill 2-3/4" Taper hole of tailstock quill MT3 Machine Overall dimensions 75.6"x29"x47" Dimension: App. weight 1980 LBS Heavy Duty Bull Nose Live Centers Used for pipe and other hollow-shaped work machining. Drawbar end. Precision Live Centers Morse Accuracy Max. RPM Drawbar Taper load Thread LC005-1 1.0003 5000 12-28NF $25.00 LC005-2 2.0003 5000 3/8-16 $29.00 LC005-3 3.0003 4000 1/2-13 $32.00 LC005-4 4.0003 3000 5/8-11 $45.00 LC005-5 5.0004 2500 3/4-16 $65.00 page 65 Morse Dimension (Inch) Drawbar Taper a A B a OAL Threads LCB005-10 MT2 0.46 2.49 1.42 70 0 5.37 3/8-16 $100.00 LCB005-11 MT3 0.7 3.1 1.66 70 0 6.75 1/2-13 $133.00 LCB005-12 MT4 1.37 5.05 2.45 75 0 7.6 5/8-11 $169.00 Precision Live Centers Morse Dimension Load Rate Drawbar Taper a A B C OAL (lbs) Threads LCHB005-200 2 0.86 1.65 1.12 1.92 5.70 600 3/8-16 $41.00 LCHB005-300 3 0.9 1.86 1.12 2.40 6.85 900 1/2-13 $48.00 LCHB005-400 4 1.02 2.17 1.25 2.57 8.20 1300 5/8-11 $66.00 LCHB005-500 5 1.38 2.7 1.9 3.25 10.50 1800 3/4-16 $110.00

LATHE & ACCESSORIES Atlas Workholding Front Hand Wheel Quickie 5C Collet Chucks. page 66 Fast and easy, front hand wheel operation Reduces operator fatigue Quick Change over Chuck to Collet Chuck - No linkages or drawtubes For 5C collets One year warranty Accurate-Maximum cone TIR.0005" Available in D type (camlock), A type, L type (long tapered nose) threaded, Flat Back and 4º taper Hand wheel teeth nitrided for longer life Body nickel plated for corrosion resistance Threaded Mount Chuck Specifications Item No. Spindle Round Cap. PB23-41 1-1/2-8 1.06 $1,450.00 Plain Back Chuck Specifications PB23-42 1-3/4-8 1.06 $1,450.00 Item No. Desc. Collet Round A B C** D E F price PB23-43 2-1/4-8 1.06 $1,450.00 Type Cap. PB23-44 4 Taper 1.06 $1,475.00 PB23-00 5C-PB 5C 1.06 9.0* 2.25 4.25 5.5 5.0 4.12 $1,195.00 PB23-45 2-3/16-10 1.06 $1,475.00 D Type Cam-Lock Chuck Specifications PB23-46 2-3/8-6 1.06 $1,475.00 Item No. Spindle Round A Type American Standard Chuck Specifications Cap. Item No. Spindle Round L Type American Standard Chuck Specifications PB23-D3 D1-3 1.06 $1,450.00 Cap. Item No. Spindle Round PB23-D4 D1-4 1.06 $1,450.00 PB23-A4 A1-4 1.06 $1,450.00 Cap. PB23-D5 D1-5 1.06 $1,475.00 PB23-A5 A1-5 1.06 $1,475.00 PB23-L00 L00 1.06 $1,450.00 PB23-D6 D1-6 1.06 $1,475.00 PB23-A6 A1-6 1.06 $1,475.00 PB23-L0 L0 1.06 $1,475.00 PB23-D8 D1-8 1.06 $1,525.00 PB23-A8 A1-8 1.06 $1,525.00 PB23-L1 L1 1.06 $1,575.00 PB23-D11 D1-11 1.06 $1,675.00 PB23-A11 A1-11 1.06 $1,675.00 PB23-L2 L2 1.06 $1,625.00 Atlas Workholding Air Powered Front Mount 5C Dead Length Collet No Chuck. Draw-tube or Air Feed Tubes Required: for Lathes,Rotary Tables and Grinders: Series ATL206-5C No Hydraulic System Required No Draw Tube or Air Feed Tubes Restricting Spindle Bore No Rear Cylinders and Cylinder Adapters Low Cost Easily Convert any Lathe or Grinder into a Production Machine Ideal for Rotary Table Applications Change from Collet Chuck to Standard Chuck Quick and Easy High Speed 5000 RPM High Accuracy Less Then.001 TIR Repeats on Duplicate Parts Plus Minus.00015 Dead Length Design Mount For Best Accuracy Use High Quality Crawford Collets Collet Chuck Order No. w/ Mount Lever or Foot Pedal Actuated Low Maintenance with Oil Mist Lubrication System ATL206-5C ST. RECESS $2,495.00 High Resistance to Coolant and Chip Penetration Uses 5C Collets, Range 1/64 (.5mm) to 1-1/8 (27mm) Straight Recess Mount Type A Mount Available in A, D, L, 4 Degree, Threaded and Straight Recess Mounting ATL206-5CA4 A4 $2,795.00 ATL206-5CA5 A5 $2,795.00 ATL206-5CA6 A6 $2,795.00 ATL206-5CA8 A8 $2,895.00 Type D Mount ATL206-5CD3 D3 $2,795.00 ATL206-5CD4 D4 $2,795.00 ATL206-5CD5 D5 $2,795.00 ATL206-5CD6 D6 $2,795.00 ATL206-5CD8 D8 $2,895.00 Collet Chuck ATL206-5C Specifi cations ATL206-5C A 168mm (6.61 ) B 130mm (5.12 ) C 26mm (1.02 ) D 5mm (0.20 ) E 100mm (3.94 ) F 55mm (2.17 ) G 106mm (4.17 ) H 147mm (5.79 ) Screw Hole Dia 9mm (0.35 ) x 4 Collet Type 5C Collets Max. RPM 5000 Sleeve Stroke 4mm (0.16 ) Air Pressure 3-8 kg/cm2(42-114 psi) Through Hole Dia 26mm (1.06 ) Chuck Weight 10kg (22lbs) Grip Force 10,500 lbs @ 100 PSI Other Mounts ATL206-5C43 2-1/4-8 $2,795.00 ATL206-5C44 4 o taper $2,795.00 ATL206-5C45 2-3/16-10 $2,795.00 ATL206-5C46 2-3/8-6 $2,895.00 Collet Chuck Supplied with: 2Filter Bars 2Air Hoses 1Fixing Bracket for Hoses 15C Collet Wrench 1Hex Key Mounting Bolts Users Manual

LATHE & ACCESSORIES B C 3-Jaw B C 4-Jaw B C Zero-set Mounting Plate Plain Back Lathe Independent Camlock -Type CD Center Dia. Spindle Chuck Plain Back Chuck Hole Nose With 2 Sets Solid Jaws 3-Jaw Plain Back Lathe Chuck With 2-Pc Reversible Jaw These BTC series has it s top & master jaws. The hard top jaws can perform as internal external jaws by turning them around 0.003 T.I.R. repeatability & meet ASA specifications. Duplicate parts for chuck through 12 Center Hole Center Hole Dia. WT. Lbs. BT3063R 1.57 6 $355.00 20.0 BT3083R 2.56 8 $450.00 38.0 BT3103R 3.15 10 $510.00 55.0 BT3123R 3.94 12 $660.00 99.0 BT3153R 5.25 15 $1,225.00 137.0 BT3203R 8.27 20 $2,355.00 265.0 BT3253R 8.27 25 $5,050.00 265.0 B C 3-Jaw Chuck 2-Pc Reversible Jaws Cam Lock D1 Spindle Dia. WT. Lbs. BT5033 0.63 3 $210.00 5.0 BT5043 0.87 4 $235.00 8.0 BT5053 1.18 5 $245.00 13.0 BT5063 1.58 6 $270.00 20.0 BT5083 2.56 8 $330.00 35.0 BT5103 2.75 10 $450.00 55.0 B C Center Hole Dia. WT. Lbs BT6063D3 1.50 6 $435.00 31.0 BT6063D4 1.50 6 $435.00 31.0 BT6083D4 2.0 8 $550.00 46.0 BT6083D5 2.0 8 $550.00 46.0 BT6083D6 2.0 8 $550.00 46.0 BT6103D5 2.75 10 $695.00 75.0 BT6103D6 2.75 10 $695.00 75.0 BT6103D8 3.15 10 $695.00 75.0 BT6123D8 4.0 12 $895.00 141.0 BT6153D11 5.25 15 $1,150.00 204.0 BT6203D11 7.09 20 $3,395.00 310.0 SK 3-Jaw Strong Scroll Chuck Plain Back, 2-Piece Jaws Chuck. Hardened & ground jaws; Cast iron body; Heat treated operating screws; One set mounting screws Center Hole Dia. WT (Lb.) BT4064 1.77 6 $270.00 22.0 BT4084 2.16 8 $300.00 35.0 BT4104 2.95 10 $300.00 51.0 BT4124 3.75 12 $450.00 100.0 BT4164 4.92 16 $725.00 139.0 BT4204 6.30 20 $925.00 227.0 BT4254 25 $2,395.00 B C 4-Jaw Independent Chuck Cam Lock Camlock direct mounting Solid jaws D1 SPINDLE Center Hole Dia. WT (Lb.) BT4084D4 2.16 8 $475.00 36.0 BT4084D5 2.16 8 $475.00 36.0 BT4104D5 2.95 10 $595.00 51.0 BT4104D6 2.95 10 $595.00 51.0 BT4124D6 3.75 12 $775.00 100.0 BT4124D8 3.75 12 $775.00 100.0 BT4164D6 4.92 16 $1,125.00 139.0 BT4164D8 4.92 16 $1,125.00 270.0 BT4204D11 7.09 20 $1,555.00 270.0 B C Zero-Set Universal Chuck Precision zero set chucks with new lower prices with 0.0005 TIR repeatability on duplicate parts Semi steel body. Scroll and jaws hardened & ground for extra gripping force Comes with master jaws and top jaws Three jaw scroll chucks for conventional machining 3-Jaw Chuck Size OD OD Max min max rpm 1063R 6 0.125 6.00 3400 $525.00 1083R 8 0.250 8.25 3100 $605.00 1103R 10 0.50 9.36 2700 $850.00 1123R 12 0.50 11.312 2200 $1,050.00 1153R 15 2200 $1,975.00 6-Jaw Chuck Size OD OD Max min max rpm 1066R 6 0.50 6.00 3400 $650.00 1086R 8 0.50 8.25 3100 $875.00 1106R 10 0.50 9.36 2700 $1,175.00 1126R 12 0.50 11.312 2200 $1,450.00 1156R 15 2200 $2,895.00 page 67 CD-203 2.13 6 $175.00 D-3 CD-201 2.50 6 $175.00 D-4 CD-202 3.25 6 $175.00 D-5 CD-206 4.19 6 $225.00 D-6 CD-247 5.50 6 $395.00 D-8 CD-220 2.13 8-1/4 $195.00 D-3 CD-204 2.50 8-1/4 $195.00 D-4 CD-208 3.25 8-1/4 $195.00 D-5 CD-209 4.19 8-1/4 $220.00 D-6 CD-207 5.50 8-1/4 $300.00 D-8 CD-219 2.50 10 $300.00 D-4 CD-210 3.25 10 $240.00 D-5 CD-211 4.19 10 $240.00 D-6 CD-212 5.50 10 $325.00 D-8 CD-214 4.19 12 $310.00 D-6 CD-215 5.50 12 $310.00 D-8 CD-273 7.75 12 $340.00 D-11 Threaded Mounting Plate Center Hole Dia. Spindle Nose TH-950 1.50 6 $175.00 1½-8 TH-951 1.75 6 $175.00 1¾-8 TH-955 2.25 6 $175.00 2¼-8 TH-958 2.38 6 $175.00 2-3/8-6 TH-985 2.25 8-1/4 $265.00 2¼-8 TH-986 2.38 8-1/4 $320.00 2-3/8-6 TH-994 2.25 10 $275.00 2¼-8 TH-995 2.38 10 $275.00 2-3/8-6 TH-989 2.75 10 $275.00 2¾-8 TH-997 2.38 12 $575.00 2-3/8-6 TH-999 2.75 12 $575.00 2¾-8 Mounting Plate Mounting Chuck Size Spindle # Nose HK357-3 HS-357 1063R 6-3JAW $225.00 4 taper HK357-6 HS-357 1066R 6-6JAW $225.00 4 taper HK362-4 HS-362 4064 6-4JAW $275.00 4 taper HK276-3 HS-276 1063R 6-3JAW $235.00 2-3/16-10 HK276-6 HS-276 1066R 6-6JAW $235.00 2-3/16-10 HK673-4 HS-673 4064 6-4JAW $235.00 2-3/16-10 American Standard Flange Nose Center Hole Dia. Spindle Nose AS-301 2.50 6 $150.00 A-4 AS-302 3.25 6 $150.00 A-5 AS-303 4.19 6 $190.00 A-6 AS-336 5.50 6 $350.00 A-8 AS-307 3.25 8-1/4 $165.00 A-5 AS-308 4.19 8-1/4 $165.00 A-6 AS-309 5.50 8-1/4 $265.00 A-8 AS-312 4.19 10 $205.00 A-6 AS-313 5.50 10 $245.00 A-8 AS-315 4.19 12 $275.00 A-6 AS-316 5.50 12 $285.00 A-8 Long Taper Key Drive Type L Center Hole Dia. Spindle Nose LT-100 2.75 6 $200.00 L-00 LT-101 3.25 6 $200.00 L-0 LT-108 2.75 8-1/4 $225.00 L-00 LT-109 3.25 8-1/4 $225.00 L-0 LT-110 4.13 8-1/4 $235.00 L-1 LT-111 2.75 10 $285.00 L-00 LT-112 3.25 10 $285.00 L-0 LT-113 4.13 10 $295.00 L-1 LT-115 3.25 12 $375.00 L-0 LT-116 4.13 12 $375.00 L-1 Thru-Hole Mont Max. Max. Gripping Range Dia Dia gripping speed O.D. range I.D. range force (N) (rpm) SK-6 6.50 1.77 D1-5 32340 4000 0.31 6.30 2.17 5.91 $880.00 SK-8 7.87 2.28 D1-6 35280 3200 0.31 7.09 2.44 6.69 $980.00 SK-10 10.75 3.43 D1-6 47040 2500 0.47 10.24 3.15 9.84 $1,380.00 SK-12 12.20 4.13 D1-8 55860 2200 0.59 11.81 3.54 11.42 $1,880.00 SK-15 15 5.04 D1-8/D1-11 39200 1500 0.98 12.60 4.33 12.20 $2,350.00 SK-16 15.94 5.71 D1-8/D1-11 44100 1500 1.18 15.75 4.33 14.96 $3,680.00

LATHE & ACCESSORIES GROMAX 3-Jaw Wedge Type Through-Hole Power Chuck without Adaptor Big Bore Power Chucks for CNC Lathes compatible with KITAGAWA Big Bore Power Chuck Larger thru hole 20% higher speed, gripping force and thru-hole than usual chucks. Assembled with adopter for ASA B5.9 type A spindle. All sliding surface are hardened and ground for accurate running and long service repeatability. Standard Equipment: Chuck assembled with adaptor, hard jaws, soft jaws, t-nuts, draw nut & wrench, mounting bolts and 2-Jaw, 3-Jaw, 4-Jaw available Matching Cylinder Chuck Thru-Hole Mont Max. Max. Dia Dia gripping force (N) speed (rpm) GTN205A4 5.315 1.299 A2-4 35280 7000 $1,980.00 GTN205A5 5.315 1.299 A2-5 35280 7000 $1,980.00 GTN206A4 6.654 1.772 A2-4 55860 6000 $2,180.00 GTN206A5 6.654 1.772 A2-5 55860 6000 $2,180.00 GTN208A5 8.268 2.047 A2-5 86240 4900 $2,480.00 GTN208A6 8.268 2.047 A2-6 86240 4900 $2,480.00 GTN210A6 10.000 2.953 A2-6 107800 4200 $2,980.00 GTN210A8 10.000 2.953 A2-8 107800 4200 $2,980.00 GTN212A6 11.969 3.585 A2-6 140140 3300 $3,980.00 GTN212A8 11.969 3.585 A2-8 140140 3300 $3,980.00 GTN215A8 15.000 4.626 A2-8 179800 2500 $5,380.00 GTN215A11 15.000 4.626 A2-11 179800 2500 $5,380.00 Parts GROMAX Super High Speed Through-Hole Rotary Hydraulic Cylinder Compatible with KITAGAWA Big Bore Cylinders Small-sized light weight: comparing with the traditional product, it is small-sized (reduced to MAX 3.75 ) and a light weight (weighted MAX 9.9 lbs.). Make its capacity more suitable to reduce the burden of the machinery at high speed turning. The most largest bore: Comparing with the old product, it has about 20% more bore full diameter for utilizing the capacity of machinery. The safety mechanism: It can retain the gripping force with a check valve. N204 /N205 N206 N208 N210 N212 N215 N218 N224 Wedge N205-1 N206-1 N208-1 N210-1 N212-1 N215-1 N218-1 N224-1 Plunger $280.00 $310.00 $385.00 $412.00 $650.00 $1,030.00 $1,030.00 $2,580.00 Blank Draw N205-2 N206-2 N208-2 N210-2 N212-2 N215-2 N218-2 N224-2 Nut $80.00 $88.00 $105.00 $120.00 $128.00 $150.00 $155.00 $560.00 Master Jaws N205-3 N206-3 N208-3 N210-3 N212-3 N215-3 N218-3 N224-3 (set 3) $960.00 $1,060.00 $1,268.00 $1,418.00 $1,800.00 $3,060.00 4,560.00 $7,680.00 Hard Jaws N205-4 N206-4 N208-4 N210-4 N212-4 N215-4 N218-4 N224-4 (set 3) $360.00 $320.00 $325.00 $390.00 $430.00 $860.00 $868.00 $1,080.00 Soft Jaws N205-5 N206-5 N208-5 N210-5 N212-5 N215-5 N218-5 N224-5 (set 3) $55.00 $65.00 $75.00 $85.00 $115.00 $220.00 $220.00 $380.00 T-Nuts N205-6 N206-6 N208-6 N210-6 N212-6 N215-6 N218-6 N224-6 (set 3) $100.00 $115.00 $128.00 $150.00 $190.00 $300.00 $300.00 $380.00 Plunger Nut N205-7 N206-7 N208-7 N210-7 N212-7 N215-7 N218-7 N224-7 $190.00 $208.00 $240.00 $260.00 $285.00 $350.00 $350.00 $590.00 Chip Cover N205-8 N206-8 N208-8 N210-8 N212-8 N215-8 N218-8 N224-8 $120.00 $135.00 $152.00 $200.00 $240.00 $340.00 $340.00 $638.00 Chuck N205-9 N206-9 N208-9 N210-9 N212-9 N215-9 N218-9 N224-9 Wrench $145.00 $168.00 $198.00 $220.00 $225.00 $230.00 $230.00 $567.00 Chuck N205-A N206-A N208-A N210-A N212-A N215-A N218-A N224-A Adapter $550.00 $650.00 $850.00 $950.00 $950.00 $1,000.00 1,200.00 $1,800.00 Actuator N205-AA N206-AA N208-AA N210-AA N212-AA N215-AA N218-AA N224-AA Adapter $1,200.00 $1,200.00 $1,300.00 $1,400.00 $1,500.00 $1,800.00 1,800.00 $2,500.00 Draw Tube N205-DT N206-DT N208-DT N210-DT N212-DT N215-DT N218-DT N224-DT $1,200.00 $1,200.00 $1,300.00 $1,400.00 $1,500.00 $1,800.00 1,800.00 $1,800.00 Replace Matching Kitagawa Chuck # Thru Hole Dia Max. Draw Tube Pull Force Max. Operating Pressure Max. rpm GTM1036 S1036 N205 1.417 5268 Lbs. 570 PSI 8000 $2,550.00 GTM1246 S1246 N206 1.811 7048 Lbs. 570 PSI 7000 $3,150.00 GTM1552 S1552 N208 2.047 12414 Lbs. 570 PSI 6200 $3,245.00 GTM1875 S1875 N210 2.953 14757 Lbs. 570 PSI 4700 $4,000.00 GTM2091 S2091 N212 3.583 18942 Lbs. 570 PSI 3800 $4,880.00 GTM2511 S2511 N215 4.626 26432 Lbs. 570 PSI 2800 $6,400.00 page 68 GROMAX 4-Jaw Wedge Type Through-Hole Power Chuck with Adaptor Chuck. Thru-Hole Mont Dia Dia NIT208A5 8.268 2.047 A2-5 $3,580.00 NIT208A6 8.268 2.047 A2-6 $3,580.00 NIT210A6 10.000 2.953 A2-6 $4,280.00 NIT210A8 10.000 2.953 A2-8 $4,280.00 NIT212A6 11.969 3.585 A2-6 $4,980.00 NIT212A8 11.969 3.585 A2-8 $4,980.00 NIT215A8 15.000 4.626 A2-8 $7,580.00 NIT215A11 15.000 4.626 A2-11 $7,580.00 Parts List NIT200A Series: NIT208 NIT210 NIT212 NIT215 Wedge Plunger NIT208-1 NIT210-1 NIT212-1 NIT215-1 $700.00 $850.00 $980.00 $1228.00 Draw Nut NIT208-2 NIT210-2 NIT212-2 NIT215-2 $105.00 $120.00 $128.00 $150.00 Master Jaws (set 4) NIT208-3 NIT210-3 NIT212-3 NIT215-3 $2000.00 $2280.00 $3280.00 $4880.00 Hard Jaws (set 4) NIT208-4 NIT210-4 NIT212-4 NIT215-4 $450.00 $620.00 $820.00 $1180.00 Soft Jaws (set 4) NIT208-5 NIT210-5 NIT212-5 NIT215-5 $120.00 $150.00 $180.00 $308.00 T-Nuts (set 4) NIT208-6 NIT210-6 NIT212-6 NIT215-6 $180.00 $210.00 $280.00 $480.00 Plunger Nut NIT208-7 NIT210-7 NIT212-7 NIT215-7 $380.00 $480.00 $580.00 $780.00 Chip Cover NIT208-8 NIT210-8 NIT212-8 NIT215-8 $180.00 $280.00 $380.00 $480.00 Chuck Wrench NIT208-9 NIT210-9 NIT212-9 NIT215-9 $198.00 $220.00 $240.00 $240.00 Chuck Adaptor NIT208-A NIT210-A NIT212-A NIT215-A $850.00 $950.00 $950.00 $1200.00 Actuator Adapter NIT208-AA NIT210-AA NIT212-AA NIT215-AA $1300.00 $1400.00 $1500.00 $1800.00 Draw Tube Gromax Vertical/Horizontal and Vertical Stationary Power Chuck HYDRAULIC POWER UNIT: These power units are compact and equipped with manually or electrically operated controls depending on the application. NIT208-DT $1300.00 DOV NIT210-DT $1400.00 NIT212-DT $1500.00 NIT215-DT $1800.00 DON Hydraulic Power Unit: 10 Gallon Tank, 2 HP 220/440V 3 phases Motor with Vane Pump, 5 GPM at 1800 rpm. Directional Solenoid Valve 110V AC, Pressure Reducing Valve, Check Valve, Circuit Block, Pressure Gauge, Fluid Radiator, Filter, Hydraulic Hoses, Pedal Switch.$ 4690.00 Description Max. Max. Draw Bar Pull Force (LBS) Operating Pressure (PSI) DOV-6-6S with 3-jaw 6 solid chuck 3083 285 $3,000.00 DOV-8-8S with 3-jaw 8 solid chuck 6167 285 $3,838.00 DOV-8-10S with 3-jaw 10 solid chuck 6167 285 $4,500.00 DOV-8-12S with 3-jaw 12 solid chuck 6167 285 $5,500.00 DOV-8-8T with 3-jaw 8 thru-hole chuck 6167 285 $4,280.00

ALORIS Quick Change Tooling System Wedge Type Super Precision Tool Post Precision Engineered to assure repetitive accuracy. Quickly and easily installed. LATHE & ACCESSORIES ~12 Lathe Swing AxA Series 10-15 Lathe Swing BxA Series 13-18 Lathe Swing CxA Series 14-20 Lathe Swing CA Series 17-48 Lathe Swing DA Series ARS-AXA ARS-BXA ARS-CXA ARS-CA ARS-DA $324.00 $395.00 $538.00 $677.00 $956.00 Turning and Facing Holder #1 Take various sizes of bits. Tool Bit 3/16 ~ 1/2 ARS-AXA.1 1/4-5/8 ARS-BXA.1 1/2-3/4 ARS-CXA.1 1/2-1 ARS-CA.1 1/2 ~1 1/4 ARS-DA.1 $54.00 $63.00 $79.00 $96.00 $143.00 Boring, Turning and Facing Tool Bit Holder #2 V-groove holds round shank boring bar and tools as well as square tool bits Heavy Duty Boring Bar Holder #4 Equipped with a split busing to accommodate a boring bar with small diameter 1/2x7/16 ARS-AXA.2 5/8x1/2 ARS-BXA.2 3/4 x3/4 ARS-CXA.2 1x13/16 ARS-CA.2 1 1/4x1 ARS-DA.2 $58.00 $70.00 $87.00 $108.00 $155.00 Tool Bit 5/8 ARS-AXA.4 3/4 ARS-BXA.4 3/4 \ ARS-CXA.4 1 ARS-CA.4 1 1/4 ARS-DA.4 $115.00 $123.00 $148.00 $175.00 $235.00 Multiple Toolholder #6 Versatile, ideal for repetitive work; for gang setups or form tool Tool Bit 1/4-1/2 ARS-AXA.6 1/4-1/2 ARS-BXA.6 3/8-5/8 ARS-CXA.6 1/2-3/4 ARS-CA.6 1/2-1 ARS-DA.6 $90.00 $105.00 $118.00 $166.00 $200.00 Universal Parting Blade Holder #7 For bevel as well as T-type blades. Tool Bit 1/2 ARS-AXA.7 11/16 ARS-BXA.7 3/4 ARS-CXA.7 7/8 ARS-CA.7 1 1/8 ARS-DA.7 $94.00 $107.00 $119.00 $155.00 $176.00 Threading Holder #8 Tool Bit This universal threading holder comes with an interchange- able high speed threading blade (2 cutting edges) Combination Turning and Facing Holder for Carbide Triangular Inserts #16N Right and left hand turning and facing na ARS-AXA.8 na ARS-BXA.8 na ARS-CXA.8 na ARS-CA.8 Na ARS-DA.8 $112.00 $119.00 $137.00 $157.00 $197.00 Tool Bit na ARS-AXA.16N na ARS-BXA. 16N na ARS-CXA. 16N na ARS-CA. 16N na ARS-DA. 16N $181.00 $200.00 $230.00 $254.00 $290.00 Morse Taper Holder #5 Drill with carriage by using power feed instead of tailstock. Knurling, Facing and TUrning Holder #10 For turning and facing as well as knurling. Tool Bit 2MT ARS-AXA.5 2MT ARS-BXA.5 3MT ARS-CXA.5 3MT ARS-CA.5 4MT ARS-DA.5 $87.00 $92.00 $115.00 $135.00 $200.00 Tool Bit 3/16-1/2 ARS-AXA.10 1/4-5/8 ARS-BXA.10 1/2-3/4 ARS-CXA.10 1/2-1 ARS-CA.10 1/2-1 1/4 ARS-DA.10 $115.00 $136.00 $153.00 $167.00 $241.00 Extension Toolholder #13 Provides an extremely rugged extended open slot featuring max. rigidity for deep turning or facing operation. Tool Bit Adjustable Knurling Holder Tool Bit #19 This tool is adjustable, providing the ideal near vertical axis approach angle for wide range of stock diameter. Dovetail Chuck Holder #35 Permits quick and accurate mounting of drills, reamers, taps, boring bars, etc. and feed by lathe s carriage power drive. 3/16-1/2 ARS-AXA.13 page 69 1/4-5/8 ARS-BXA.13 1/2-3/4 ARS-CXA.13 1/2-1 ARS-CA.13 1/2-1 1/4 ARS-DA.13 $90.00 $101.00 $113.00 $135.00 $225.00 3/4X1/4X3/8 ARS-AXA.19 3/4X1/4X3/8 ARS-BXA.19 3/4X1/4X3/8 ARS-CXA.19 3/4X1/4X3/8 ARS-CA.19 3/4X1/4X3/8 ARS-DA.19 $302.00 $315.00 $333.00 $345.00 $375.00 Tool Bit 0-1/2 CH ARS-AXA.35 0-1/2 CH ARS-BXA.35 0-1/2 CH ARS-CXA.35 3/16-1/4 CH ARS-CA.35 3/16-1/4 CH ARS-DA.35 $224.00 $236.00 $249.00 $290.00 $327.00

MACHINE TOOL. SHOP SUPPLY Double Column Type Fully Automatic Bandsaw Please visit our website at www.gromax-usa.com for more models. H-260HB Shown Specifi cations: H-260HA H-260HB 260mm (10.24 ) 310Hx260mm (12 x10.24 ) (WxH) Bundle Width 145 to 230mm (5.7 x9.05 ) Cutting Height 40-130mm (1.57 x5.12 ) Blade Speed 20 to 80 m/min 20~80 m/min 65.8 to 262.5 fpm 65.8 to 262.5 fpm (variable speed pulley) (inverter ) Vise Clamping (Hydraulic) Rack and Pawl Full Stroke Blade Tension Manual Hydraulic Blade Size (LxWxT) 3820x27x0.9mm 3920x34x1.1mm (150 x1.07 x0.035 ) (154 x1.34 x0.04 ) Motors Blade Drive 3 HP 5 HP Hydraulic Pump 1 HP Coolant Pump 1/8 HP Chip Motor 40 W Shuttle bar Single Feed 400mm (15.75 ) feed Multiple Feed 400mm (15.75 ) x9 times Floor space 2170x2100mm (85.4 x 82.68 ) List $POR $POR Pivot Type Fully Automatic Bandsaw S-300HA shown Please visit our website at www.gromax-usa.com for more models. Horizontal Bandsaw Specifi cations: S-300HA S-300HB S-400HA 300mm(12 ) 400mm(16 ) 250x300mm(10 hx12 w) 330x410mm(13 hx16 w) Bundle Cutting Width 145 to 230mm(6 to 9 ) 195 to 300mm(8 to 12 ) Height 40 to 150mm(1 1/2 to 6 ) 90 to 200mm(3 1/2 to 8 ) Blade Speed 50Hz 17 to 68 m/min 18 to 72 m/min 20 to 80 m/min (55 to 225fpm) (58 to 230fpm) (65 to 260fpm) option 17 to 100 m/min option 18 to 110 m/min option 20 to 120 m/min (55 to 330fpm) (58 to 350fpm) (65 to 390fpm) 60Hz 20 to 80 m/min 22 to 88 m/min 24 to 96 m/min (65 to 260fpm) (70 to 280fpm) (80 to 315fpm) Motors Blade drive 2.2kw(3 HP) 3.7kw(5 HP) 3.7kw(5 HP) Hydraulic pump 0.75kw(1 HP) 0.75kw(1 HP) 1.5kw(2 HP) Coolant pump 0.1kw(1/8 HP) 0.1kw(1/8 HP) 0.2w(1/4 HP) Blade Size 3820x25x0.9mm 3820x32x1.1mm 4570x32x1.1mm (150 x1 x0.035 ) (150 x1 1/4 x0.042 ) (180 x1 1/4 x0.042 ) Blade Tension Hydraulic Shuttle Bar Feed Single feed 400mm(16 ) 500mm(20 ) Multiple feed 400mm(16 )x9 500mm(20 )x9 Machine Weight 1650kg(3630 lb) 1700kg(3740 lb) 2300kg(5060 lb) Floor Space 1800x2160mm(71 x85 ) 2100x2500mm(82 x99 ) List $POR $POR $POR Metal Cutting Bandsaw RF-1018B SHOWN RF-916H 9 x 16 capacity, 1 HP, 4 cutting speeds 3- phase and single-phase motor both available, 1 blade, with coolant system and hydraulic feed WT RF-1018B (step pulley) 900Lbs $4,150.00 RF-1018V (variable speed) $4,500.00 RF-1018NDR (variable speed) $6,700.00 RF-712N Built-in coolant system; Hydraulic downfeed; Quick positioning vise; Heavy cast iron machine table; 4 cutting speeds RF-712N RF-712DR/ 2WAY SWIVEL HEAD 7 x 12 capacity, 3/4 HP, 1 PH, Motor, 3/4 blade page 70 $1350.00 RF-712DR 7 x 12 capacity, 3/4 HP, 1 PH, Motor, 3/4 blade $3120.00

MACHINE TOOL. SHOP SUPPLY GROMAX Universal Cutter Grinder This unit is designed for single-lip cutter. It can also be used to grind engraving cutter to various shape & angle. GU2 Standard Accessories: Diamond Wheel Dresser Collets 4/6/8/10/12mm (or inch) Wrench & Spanner Set Grinding Wheel Wheel Mount Aligning Finger Lock Pin Drive Belt GROMAX Universal Tool & Cutter Grinder Large, easy to read dials Smooth movement due to steel balls on the longitudinal travel bed Air bearing fi xture works on steady rest Air quill make of heat-treated alloys, chromium plating, ground and tapped High grade castings and aluminum alloys throughout Forward and reverse switch Use worm and worm gear to adjust angle and turn around the wheel head Proper distance of longitudinal travel is controlled by limit switch Backlash adjustment exist in the leader screw and nut of crossfeed GU2 $3,050.00 GU2 Max. Collet 5/8 Max. Grinding Dia. 1 Taper Angle 0 ~180 Relief Angle 0 ~45 Negative Angle 0 ~25 Grinding Spindle 6000rpm Cup Grinding Wheel 4 x2 x20mm Motor 1/3HP 220V 50/60Hz Net/Gross Weight 99/132 Lbs. Machine Dimensions 17.7 x16 x14 Packing Dimensions 21.6 x17.7 x18 Samples of Cutter Porfiles GU2.1 Lathe Tool Attachment GU2.3 Twist Drill Attachment GU2 Optional Accessories: Lathe Tool Attachment GU2.1 $100.00 End Mill Attachment GU2.2 $350.00 Twist Drill Attachment GU2.3 $240.00 GT-610 $4,200.00 Standard Accessories: Free! Air bearing fi xture Cup wheel Open end wrench Forward/ reverse switch Offset wrench Hex wrenches (2) Distance between centers 10 Swing over table 8 Longitudinal travel of table 10 Cross travel of saddle 6-5/16 Work table 5-1/4 x 18-1/2 Vertical adjustment of wheel head 7-1/2 Swivel adjustment of table 0 Swivel adjustment of column 360 Vertical tilting range of wheel head 360 Diameter of wheel 1-1/4 I.D. Saucer wheel: 6 Flaring wheel: 5 Speed of wheel 50Hz, 2850rpm 60Hz, 3450rpm Motor 1/3 Hp,1,110/220V Weight 275 Lbs GROMAX Vertical Metal Cutting Bandsaw Standard GB-36 / GB-45 Variable Speed GV-50 / GV-100 Horizontal Bandsaw : BS300SA BS300SA $8,850.00 3HP, 73-260 RPM, 1 PH, Motor : Round: 12 Rect.: 10 x20 page 71 Optional Accessories: Standard Accessories: Rip fence for straight, repeated Blade shear, grinder cuttings, easily removable for varied size Saw blade butt welder with annealing unit built in Miter protractor for angular cutting Built-in blade & tire cleaning brush Low voltage working lamp One set of required tools One instruction & parts manual GB-36 GB-45 GV-50 GV-100 Throat 14 17-15/16 20 39-3/8 Max. work height 9-1/16 10-1/16 12-3/8 11 13/16 Table size 19.5x15.25 23.5x19.5 26x27.5 26x27.5 17.75x19.5 Table inclination 4 ways 15 Saw blade length 113 141-1/8 151-1/8 177-1/8 Saw blade width 1/8 ~5/8 Saw blade speeds Low 65~295 85~375 65~265 65~265 High 400~1600 400~1600 Butt welder capacity 2.4 KVA,1/8 ~5/8 Drive motor (HP) 1 1 2 2 Net Wt. (LBS) 551 882 1322 1963 $3,300.00 $3,880.00 $5,650.00 $7,100.00 w/table auto feed NA NA GV-50A $11400.00 GV-100A $12960.00

MACHINE TOOL. SHOP SUPPLY GROMAX Universal Drill Grinder Double Cams: It can grind the drills from one fl ute to six fl utes. UDG60.GW Cup Grinding Wheel $28.00 UDG100.GW Cup Grinding Wheel $32.00 UDG -100 Shown Rugged construction and precision components assure accuracy. The six jaw chuck accurately centers the drill which ensures that the cutting lips are ground equally in both length and angle to produce drill, NC drill, step drill, taps, endmill,counter sink, round bars, etc. Grinding wheel and "dish" grinding wheel are both on spindle to save time. Grinding capacity: UDG-60: 0.07 ~ 2.36 (straight & taper shank) UDG-100: 0.20 ~ 3.94 (straight & taper shank) With 6 precision jaw chuck, it can grind the table of the drills and the paring of the drills abdomen. The main spindle has 2 grinding wheels. It can grind the blade and the center of the drills at the same time. This can save time with out hanging the grinding wheel. The motor can travel 6.30 up and down. This can increase the control of the machining. Testimonial: The Gromax Universal Drill Grinder - UDG-100 has been a great asset to our company. We have ground step drills, taper and straight shank drills, counter sinks and more with excellent accuracy. We have successfully ground up to 3 3/4 diameter tools. The 8 jaw chuck hold tools very accurately. This machine has been very versatile and has been well worth the money invested. Need sharpen your end mill, drill, reamer, porting tool? Sharpen up to 4 diameter drills. Please Call 559-673-1025 or Fax: 209-673-0124 Richard Tognotti - Precision End Mill Grinding PEMG@thergrid.net Standard Accessories: One 6-jaw self-centering chuck One grinding wheel (recessed one side) One "dish" grinding wheel for point thinning Grinding wheel flange and balancing weights No 1,2,3,4 Morse taper sleeves. A.C. motor for grinding wheels Tools for general use Service/ instruction manual Radial relief attachment. Relieves radius of pilot to produce lands. Also for sharpening end mills Work light (12 Volts) Wheel balancer & arbor UDG-60 Shown Extra grinding wheel flange for cup wheel Cup grinding wheel Cam for left hand drills Cam for spiral point drills Cam for sheet metal point drills Cam for 1 flute grinding Cam for 3 flute grinding Cam No.4 for point angle (40-180 ) Cam for 5 flute grinding Cam for 6 flute grinding Cam No.6 for step drill Cam No.8 for 4 flute taps or reamers UDG-60 UDG-100 Drill size 0.08 ~ 2-3/8 0.2 ~ 3-15/16 Table Travel (XxY) 7.09 x 6.3 7.09 x 6.3 Vertical adjustment of wheel head 6.3 6.3 Point angles 40-180 40-180 Clearance angle 0-18 0-18 Motor 1 HP 220V/ 3 Phases Grinding wheels O.D.xWxI.D. 7 x 1 / 4 x 1 / 4 7 x 3/4 x 1 / 4 Speed of rotation 3600 rpm 3600 rpm Net weight 616 LB 750 LB Packing Dimension 37.4 x 39.4 x 58.3 $7,600.00 $14,700.00 GROMAX Precision Drill Sharpener Typical Sharpening Application: Ideal for sharpening general drill bits, step drill bits, taps, chamfering tools, end mills, ect. page 72 PDS32A $7,850.00 Sharping Range Dia 3-32mm Front Edge Angle 40 0-180 0 Back Range Angle 0 0-18 0 Motor 1/2 HP Grinding Wheel 150x25x31.75mm Net Wt./ Gross Wt. 395 Lb/392 Lb Crate Size 29 x27 x57 Standard Accessories: Sealed Stand. Cam No1, No2, No3, No4 Chuck, 6-jaw auto centering Grinding wheel and attached weight. M-Type Sleeve MT 2, MT3 Quartz lamp. Operation manual, CD Tools box

GROMAX Universal Tool & Cutter Grinder GT-357L Shown GT-357L $11,950.00 MACHINE TOOL. SHOP SUPPLY Specifi cation GT-357L Max. distance from colum to outside of straight wheel; dove tail slide 4 5/8 (117mm) not extended, spindle 90o to table Max. distance from colum to outside of straight wheel; dove tail slide 11 9/16 (294mm) extended, spindle 90o to table Grinding wheel hole size 1 1/4 Distance between Tailstocks 22 Distance between centers in workhead and tailstock 15 Distance between collet in workhead and tailstock 15 1/2 Distance between chuck face and tailstock (1 hole through chuck) 14 Table working surface 5 1/4 x 27 1/4 Sub Table 8 x38 Total crossfeed movement 7 3/4 Feed per revolution of handweel 0.100 Feed per graduation of handweel 0.0005 Table traverse 14 Fast feed per revolution of handwheel 3 1/8 Slow feed per revolution of handwheel 5/8 Ratio-Fast: Slow 5:01 Vertical Movement of Column 7 Feed per ravolution of handwheel 0.05 Feed per graduation of handwheel 0.0005 Column diameter 4 Min. distance centerline of wheel shaft to top of table 3 3/4 Max. distance centerline of wheel shaft to top of table 10 3/4 Centerline height of fi xtures to top of table 4.130 Table T-slot 7/16 Table swivels (calibration: 3 per ft., 15oeither side of center 240 o Wheel head swivel 360 o Motor speed rpm 60HZ: 3450 50HZ:2850 Spindle speed range (High speed Grinders) 60HZ:3450~18400 50HZ:3380-16465 Spindle speed range (Heavy duty Grinders) 60HZ:1150~7760 50HZ:1185~7695 Net weight 1140 lbs Gross weight 1400lbs Packing Dimension 43 x43 x63 OD Grinding This machine with C21S2 heavy duty spindle fi xture is suitable for heavy duty cutter sharpening and continuous cylindrical grinding. Picture above shows the 357L with special accessory C2DH-1 motor driven workhead, making it more niversal for OD grinding. Heavy Duty C21S2 1/2 HP motor handy adaptors with the heavy duty spindle fixture are special for heavy duty cutter sharpening. Belt Code: 5M560 5M615 5M670 5M710 page 73

MACHINE TOOL. SHOP SUPPLY SONY Mill 2-Axis/3-Axis Package Magnescale Inch / metric conversion; Absolute / Incremental; Datom point memory; Linear error comp.; Error Check / Fault Alarm; Hole; Zero reset; Preset capability; Recall; Data backup; Self-Diagnostics; Midpoint calculation; electable Resolutions (0.001, 0.0005, 0.0002 ) Digital Readout System Adaptable Readout for up to Three Axes ND780 Series Display Counter: General purposes Primarily for milling machines ND522 Series Display Counter: General purposes Primarily for milling machines Digimatic DRO System New! KA Counter & AT-715 Magnetic Scales DRO Packages For Bridgeport & Bridgeport Type Vertical Milling Machines Accu-Rite Micro Line Millman SONY Magnescale SG10 Grinder Package SONY Lathe Package C80 DIGITAL READOUT NEWALL TOPAZ/ DP8 series C80 Mill Packages:- 2-Axis Based on the principle of electromagnetic, Newall s Spherosyn, Microsyn scales consist of a tube, constructed of stainless steel or carbon fi ber weave, fi lled with a column of individually graded steel balls. The balls are set under a pre-load at the factory. The tube is then sealed. The Reader Head consists of six copper coil assemblies wound around a fi ber composite bobbin. The coil assemblies and required electronic circuitry are potted with an epoxy resin. This completely seals the electronics from coolant, oil and other shop contaminants. New! A50,C70,C80,E70-M,E70-L Displays Parts No. Pkg. Description: Note: C802000/1 $1545.00 $1390.00 C80 Mill Package, 12 x24 Travel C802000/2 $1545.00 $1390.00 C80 Mill Package, 12 x30 Travel C802000/3 $1545.00 $1390.00 C80 Mill Package, 12 x36 Travel C802000/4 $1545.00 $1390.00 C80 Mill Package, 16 x30 Travel C802000/5 $1545.00 $1390.00 C80 Mill Package, 16 x36 Travel C802000/6 $1545.00 $1390.00 C80 Mill Package, 16 x40 Travel C80 Mill Packages:- 3-Axis Parts No. Pkg. Description: C803000/1Q06 C803000/1K16 C803000/2Q06 C803000/2K16 C803000/3Q06 C803000/3K16 C803000/4Q06 C803000/4K16 C803000/5Q06 C803000/5K18 C803000/6Q06 C803000/6K18 $1995.00 $1795.00 C80 Mill Package, 12x24x6 Travel C80 Mill Package, 12x24x16 Travel $1995.00 $1795.00 C80 Mill Package, 12x30x6 Travel C80 Mill Package, 12x30x16 Travel $1995.00 $1795.00 C80 Mill Package, 12x36x6 Travel C80 Mill Package, 12x36x16 Travel $1995.00 $1795.00 C80 Mill Package, 16x30x6 Travel C80 Mill Package, 16x30x16 Travel $1995.00 $1795.00 C80 Mill Package, 16x36x6 Travel C80 Mill Package, 16x36x18 Travel $1995.00 $1795.00 C80 Mill Package, 16x40x6 Travel C80 Mill Package, 16x40x18 Travel C80 Lathe Packages:- 2-Axis Scale Length = Travel size+10 C70 Package $1,395.00 Parts No. C8006M10040SH11 Pkg. $2055.00 $1845.00 Description: C80 Lathe Package, 6 x40 Travel Note: Microsyn scale s C8008M10040SH11 C80 Lathe Package, 8 x40 Travel C8010M10040SH11 C80 Lathe Package, 10 x40 Travel C8006M10050SH11 C8008M10050SH11 C8010M10050SH11 C8006M10060SH11 C8008M10060SH11 C8010M10060SH11 C8008M10072SH11 C8010M10072SH11 C8012S00072SH11 C8008M10080SH11 C8010M10080SH11 C8012S00080SH11 C8010M10100SH11 C8012M10100SH11 C8014S00100SH11 C8012S00120SH11 C8014S00120SH11 C8016S00120SH11 C8020S00120SH11 $2210.00 $1898.00 C80 Lathe Package, 6 x50 Travel C80 Lathe Package, 8 x50 Travel C80 Lathe Package, 10 x50 Travel $2364.00 $2130.00 C80 Lathe Package, 6 x60 Travel C80 Lathe Package, 8 x60 Travel C80 Lathe Package, 10 x60 Travel $2763.00 $2405.00 C80 Lathe Package, 8 x72 Travel C80 Lathe Package, 10 x72 Travel C80 Lathe Package, 12 x72 Travel $2879.00 $2590.00 C80 Lathe Package, 8 x80 Travel C80 Lathe Package, 10 x80 Travel C80 Lathe Package, 12 x80 Travel $3497.00 $3150.00 C80 Lathe Package, 10 x100 Travel C80 Lathe Package, 12 x100 Travel C80 Lathe Package, 14 x100 Travel $4012.00 $3610.00 C80 Lathe Package, 12 x120 Travel C80 Lathe Package, 14 x120 Travel C80 Lathe Package, 16 x120 Travel C80 Lathe Package. 20 x120 Travel overall length=travel size+7 Spherosyn scale s overall length= Travel size+ 10 page 74

Hoist and Lifting Ring Side Load Hoist Ring Designed for side-mounted applications Ideal for stamping and injection mold industries Rated loads from 650 lbs. to 29,000 lbs. Material: 4140 certified aircraft quality Standard Side Load Hoist Ring (Unit: inch) Rated Thread A B C D E F Torque Wt. Load/lb Size ft/lb (lb) 43510 650 5/16-18 2 1-1/2 1-7/16 3/8 5/8 1-15/16 3.5 0.25 $77.18 43515 800 3/8-16 2 1-1/2 1-7/16 3/8 3/4 1-15/16 4.5 0.25 $77.18 43520 1,800 1/2-13 3 2-3/8 2-1/4 5/8 1 3 15 3.25 $91.94 43525 2,500 5/8-11 3 2-3/8 2-1/4 5/8 1-1/4 3 25 3-25 $91.94 43530 4,000 3/4-10 4 3-3/4 3-3/8 1 1-1/2 4-1/2 50 11.25 $207.71 43535 5,500 7/8-9 4 3-3/4 3-3/8 1 2 4-1/2 80 11.25 $207.71 43540 7,000 1-8 4 3-3/4 3-3/8 1 2 4-1/2 90 11.50 $207.71 43545 14,000 1 1/4-7 6 4-5/8 4-5/8 1-3/8 2 6-1/4 150 27.75 $454.00 43550 17,000 1 1/2-6 6 4-5/8 4-5/8 1-3/8 2-1/2 6-1/4 250 31.50 $454.00 43555 29,000 2-4 1/2 5.25 x10.5 4-5/8 6-5/8 1-1/2 3-1/8 11-1/8 300 42 $679.87 Metric Side Load Hoist Ring (Unit: inch) Rated Thread A B C D Load/ (mm) kgsize Street Plate Lifting Ring Used for tightening and loosening with hammer or steel bar Finish: phosphate per DOD-P-16232F Safety factor: 5:1 Street Plate Lifting Ring (Unit: inch) Rated Load/lb A B C D E F Thread Type Thread Size Torque Ft/lb 38215 10,000 1.40 4-13/16 4-3/8 1.00 1.0 8-7/64 Coil 1.25 230 $272.74 38225 10,000 1.40 4-13/16 4-3/8 1.00 1.5 8-7/64 Coil 1.50 470 $283.46 38235 10,000 1.40 4-13/16 4-3/8 1.00 1.0 8-7/64 Acme 1.25 230 $272.74 38245 10,000 1.40 4-13/16 4-3/8 1.00 1.5 8-7/64 Acme 1.50 470 $283.46 38865 15,000 1.75 6 4-1/4 1.25 1.0 8-3/4 Coil 1.25 230 $396.60 38875 15,000 1.75 6 4-1/4 1.25 1.5 8-3/4 Coil 1.50 470 $407.32 38885 15,000 1.75 6 4-1/4 1.25 1.0 8-3/4 Acme 1.25 230 $396.60 38895 15,000 1.75 6 4-1/4 1.25 1.5 8-3/4 Acme 1.50 470 $407.32 Street Plate Nut Finish: Black oxide per mil spec. Safety facotr: 5:1 Magnetic Particle Inspected Certifi ed Heat Treatment E 360 swivel / 180 pivot F ft/lb Torque (lb) Wt. 43560 325 M8x1.25 2 1-1/2 1-7/16 3/8 16 1-15/16 3.5 0.25 $91.85 43565 500 M10x1.50 2 1-1/2 1-7/16 3/8 20 1-15/16 4.5 0.25 $91.85 43570 725 M10x1.75 3 2-3/8 2-1/4 5/8 24 3 15 3.25 $115.67 43575 1,400 M16x2.00 3 2-3/8 2-1/4 5/8 31 3 25 3.25 $115.67 43580 2,290 M20x2.50 4 3-3/4 3-3/8 1 40 4-1/2 50 11.25 $231.34 43585 3,050 M24x3.00 4 3-3/4 3-3/8 1 47 4-1/2 80 11.25 $231.34 43590 4,850 M30x3.50 6 4-5/8 4-5/8 1-3/8 44 6-1/4 150 27.75 $563.60 Welding rod-alloy #7018 360 swivel / 180 pivot Round Base Swivel & Pivot Hoist Ring 360 swivel / 180 pivot Direct mounting Wide round base helps distribute shear loads Rated load capacities from 2,500 to 20,000 Lbs. Perfect for pre-cast concrete products Round Base Swivel & Pivot Hoist Ring (Unit: inch) Rated Load/lb A B C D H F I Thread Size Torque Ft/lb 44646 2,500 0.88 3-1/4 1-7/64 3/4 3.5 6-3/4 1/2 1/2-13 28 $134.58 44642 4,000 0.88 3-1/4 1-7/64 3/4 3.5 6-3/4 5/8 5/8-11 60 $134.58 44654 5,000 0.88 3-1/4 1-7/64 3/4 3.5 6-3/4 3/4 3/4-10 100 $134.58 44660 7,000 1.40 4-13/16 1-1/2 1 5.0 8-7/64 3/4 3/4-10 100 $235.82 44656 8,000 1.40 4-13/16 1-1/2 1 5.0 8-7/64 7/8 7/8-9 160 $235.82 44666 10,000 1.40 4-13/16 1-1/2 1 5.0 8-7/64 1 1/8 230 $235.82 44802 15,000 1.75 6 1-7/8 1-1/4 7.0 8-3/4 1-1/4 1 1/4-7 470 $350.15 44704 20,000 2.00 7-11/32 2 1-1/2 7.0 10-7/64 1-1/2 1 1/2-6 800 $476.40 Hoist Ring Kit Hoist Ring Kits enable you to custom assemble just the right swivel hoist ring for the job. Kits come complete with U-Bar (body and sub-assembly), screws, bushings, washers and E-rings enough to confi gure over 24 different hoist ring sizes and capacities. A handy accessory kit for lifting and moving heavy loads, and a must for your tool crib! Hoist Ring Kit (includes 4 of each item) Sub. Assembly Rated Load/lb Screw Screw Size Thread Length 46306 $1,177.00 46108 3/8 U-Bar 46600 1/2 U-Bar 46020 3/4 U-Bar Bushing Washer E-Ring 600 46139 1/4-20X1-1/4 1/2 46112 46120 46133 800 46144 5/16-18X1-1/4 1/2 46128 46126 46134 1,000 46146 3/8-16X1-1/4 1/2 46152 46148 46136 2,000 46614 7/16-18X2 1 46618 46616 46612 2,500 46636 1/2-13X2 1 46628 46626 46036 4,000 46044 5/8-11X2-1/4 1 46028 46026 46034 5,000 46054 3/4-10X2-1/4 1 46074 46068 46038 46304 $1,177.00 46020 2,500 46050 1/2-13X2-1/4 1 46072 46066 46036 3/4 U-Bar 4,000 46044 5/8-11X2-1/4 1 46028 46026 46034 5,000 46054 3/4-10X2-1/4 1 46074 46068 46038 46220 1 U-Bar 7,000 46246 3/4-10X3-1/4 1-1/2 46272 46266 46038 8,000 46242 7/8-9X2-3/4 1 46228 46226 46234 10,000 46250 1-8X3 1-1/4 46274 46268 46238 46904 $1,337.50 (Metric) 46020 1,050kg 49048 M12X1.75X50 19mm 49072 49066 49122 3/4 U-Bar 1,900kg 49056 M16X2.00X60 29mm 49028 49026 46034 2,150kg 49054 M20X2.50X65 34mm 49074 49068 46038 46220 1 U-Bar MACHINE TOOL. SHOP SUPPLY 3,000kg 49244 M20X2.50X75 32mm 49272 49266 46038 4,200kg 49250 M24X3.00X80 37mm 49274 49268 46238 4,200kg 49242 M30X3.50X100 38mm 49228 49226 46834 KANETEC Lifting Magnet List LPR-V150 $560.00 LPR-V300 $1,000.00 LPR-600 $1,200.00 LPR-V1200 $3,150.00 Street Plate Nut (Unit: inch) Thread Type Thread Size/A B C D E 48821 UNC 3/4-10 3 2-1/8 1 1/8 $32.16 48823 UNC 1-8 3 2-1/8 1 1/8 $32.16 48825 UNC 1 1/4-7 3 2-1/8 1 1/8 $32.16 48822 Coil 1 1/4-3.5 3 2-1/8 1 1/8 $32.16 48820 Acme 1 1/4-5 3 2-1/8 1 1/8 $32.16 48827 UNC 1 1/2-6 3-1/2 2-3/8 1-1/2 3/8 $42.88 48824 Acme 1 1/2-5 3-1/2 2-3/8 1-1/2 3/8 $42.88 48829 UNC 2-4 1/2 3-1/2 2-3/8 1-1/2 3/8 $42.88 page 75 Max.lifting capacity[kg] Dimensions[mm] [kg] Steel plate Round steel W V L H G D E F Mass LPR-V150A 150 100 90 60 130 155 260 40 19 15 7.5 LPR-V300A 300 200 90 60 230 170 360 50 19 20 12.5 LPR-V600A 600 400 136 90 270 235 440 60 25 25 35 LPR-V1200A 1200 800 175 120 430 300 620 70 28 30 85 *The lifting capacity is indicated by one third (safety factor 3)of the maximum holding power.

MACHINE TOOL. SHOP SUPPLY Hoist and Lifting Ring Safety Hoist Ring Material: AISI4140 aircraft quality Finish: Black oxide per mil spec 360 swivel / 180 pivot cadmium plated Safety factor: 5:1 100% magnetic particle inspected Certifi ed heat treatment Rated load from 400 Lbs. to 125 tons Standard Safety Hoist Ring (Unit: inch) *LONG BAR Rated Thread A C D E B F Torque WT PRICE Load/lb Size Ft/# (lb) 46100 600 1/4-20 0.43 0.71 3/8 0.54 1.27 2.67 6 0.3 $86.04 46102 800 5/16-18 0.43 0.71 3/8 0.29 1.27 2.67 7 0.3 $74.09 46104 800 5/16-18 0.43 0.71 3/8 0.54 1.27 2.67 7 0.3 $74.09 46106 1,000 3/8-16 0.43 0.71 3/8 0.54 1.27 2.67 12 0.3 $74.09 46606 2,000 7/16-14 0.70 0.93 1/2 1.07 1.84 3.77 22 1.0 $102.77 46602 2,500 1/2-13 0.70 0.93 1/2 1.07 1.84 3.77 28 1.0 $90.82 46000 2,000 7/16-14 0.88 1.22 3/4 0.78 2.31 4.78 22 2.6 $102.77 *46638 2,000 7/16-14 0.88 1.22 3/4 0.78 4.25 6.72 22 2.6 $108.75 46008 2,500 1/2-13 0.88 1.22 3/4 0.78 2.31 4.78 28 2.6 $90.82 *46644 2,500 1/2-13 0.88 1.22 3/4 0.78 4.25 6.72 28 2.6 $96.80 46010 2,500 1/2-13 0.88 1.22 3/4 1.03 2.31 4.78 28 2.6 $90.82 *46646 2,500 1/2-13 0.88 1.22 3/4 1.03 4.25 6.72 28 2.6 $96.80 46012 2,500 1/2-13 0.88 1.22 3/4 1.28 2.31 4.78 28 2.6 $90.82 *46648 2,500 1/2-13 0.88 1.22 3/4 1.28 4.25 6.72 28 2.6 $96.80 46002 4,000 5/8-11 0.88 1.22 3/4 0.78 2.18 4.78 60 2.6 $90.82 46004 4,000 5/8-11 0.88 1.22 3/4 1.03 2.18 4.78 60 2.6 $90.82 *46640 4,000 5/8-11 0.88 1.22 3/4 1.03 4.12 6.72 60 2.6 $96.80 46006 4,000 5/8-11 0.88 1.22 3/4 1.28 2.18 4.78 60 2.6 $90.82 *46642 4,000 5/8-11 0.88 1.22 3/4 1.28 4.12 6.72 60 2.6 $96.80 46014 5,000 3/4-10 0.88 1.22 3/4 1.03 2.06 4.78 100 3.0 $90.82 *46650 5,000 3/4-10 0.88 1.22 3/4 1.03 4.00 6.72 100 3.0 $96.80 46018 5,000 3/4-10 0.88 1.22 3/4 1.53 2.06 4.78 100 3.0 $90.82 *46654 5,000 3/4-10 0.88 1.22 3/4 1.53 4.00 6.72 100 3.0 $96.80 46204 7,000 3/4-10 1.40 1.71 1 1.04 3.06 6.52 100 7.0 $198.37 *46658 7,000 3/4-10 1.40 1.71 1 1.04 4.65 8.11 100 7.0 $222.27 46206 7,000 3/4-10 1.40 1.71 1 1.54 3.06 6.52 100 7.0 $198.37 *46660 7,000 3/4-10 1.40 1.71 1 1.54 4.65 8.11 100 7.0 $222.27 46202 8,000 7/8-9 1.40 1.71 1 1.04 2.93 6.52 160 7.0 $198.37 *46656 8,000 7/8-9 1.40 1.71 1 1.04 4.52 8.11 160 7.0 $222.27 46210 10,000 1-8 1.40 1.71 1 1.29 2.81 6.52 230 7.5 $198.37 *46662 10,000 1-8 1.40 1.71 1 1.29 4.40 8.11 230 7.5 $222.27 46212 10,000 1-8 1.40 1.71 1 1.54 2.81 6.52 230 7.5 $198.37 *46664 10,000 1-8 1.40 1.71 1 1.54 4.40 8.11 230 7.5 $222.27 46214 10,000 1-8 1.40 1.71 1 2.29 2.81 6.52 230 7.5 $198.37 *46666 10,000 1-8 1.40 1.71 1 2.29 4.40 8.11 230 7.5 $222.27 46802 15,000 1 1/4-7 1.75 2.11 1-1/4 1.89 4.12 8.73 470 14.0 $319.07 46702 20,000 1 3/8-6 2.00 2.36 1-1/2 2.64 5.20 10.59 540 22.0 $535.36 46404 24,000 1 1/2-6 2.25 2.81 1-3/4 2.70 6.41 12.47 800 34.0 $407.50 46400 30,000 2-4 1/2 2.25 2.81 1-3/4 2.96 5.91 12.47 800 36.0 $479.20 47002 50,000 2 1/2-8 3.00 4.09 2-1/4 4.00 8.03 16.87 2100 88.0 $1,394.57 47006 50,000 2 1/2-4 3.00 4.09 2-1/4 4.00 8.03 16.87 2100 88.0 $1,394.57 47200 75,000 3-4 3.75 5.27 2-3/4 5.00 8.48 19.50 4300 166 $2,333.84 47402 100,000 3 1/2-4 4.00 6.06 3-1/4 7.00 9.28 22.09 5100 265 CALL 47602 250,000 4-6 6.00 14.0 5 9.00 14.0 33.00 9900 790 CALL Metric Safety Hoist Ring Rated Load/kg Thread Size (Unit: mm) *LONG BAR A C D E B F Torque Wt. Kgm (kg) 46912 400 M8x1.25 11 18 10 13 32 68 0.86 0.17 $82.46 46916 500 M10x1.50 11 18 10 18 30 68 1.5 0.17 $82.46 46924 1,050 M12x1.75 22 30 19 19 60 121 3.7 1.08 $99.19 *47124 1,050 M12x1.75 22 30 19 19 110 171 3.7 1.08 $109.94 46930 1,900 M16x2.00 22 30 19 29 56 121 8.4 1.12 $99.19 *47130 1,900 M16x2.00 22 30 19 29 106 171 8.4 1.12 $109.94 46936 2,150 M20x2.50 22 30 19 34 52 121 14 1.19 $99.19 *47136 2,150 M20x2.50 22 30 19 34 102 171 14 1.19 $109.94 46942 3,000 M20x2.50 36 43 25 32 78 166 14 3.03 $211.52 *47142 3,000 M20x2.50 36 43 25 32 118 206 14 3.03 $227.05 46948 4,200 M24x3.00 36 43 25 37 74 166 31 3.1 $211.52 *47148 4,200 M24x3.00 36 43 25 37 114 206 31 3.1 $227.05 *46950 4,200 M30x3.50 36 43 25 58 108 206 60 3.1 $211.52 46956 7,000 M30x3.50 45 54 32 42 106 222 60 6.3 $359.70 46958 7,000 M30x3.50 45 54 32 62 106 222 60 6.4 $359.70 46966 11,000 M36x4.00 57 71 44 64 166 317 100 15.5 $476.81 46968 12,500 M42x4.50 57 71 44 82 160 317 100 16 $518.63 46970 13,500 M48x5.00 57 71 44 82 154 317 100 16.8 $555.68 46972 22,300 M64x6.00 76 103 57 101 204 428 273 39 $1,438.78 46988 31,500 M72x6.00 95 133 70 132 220 495 559 74 $2,508.31 46990 51,000 M90x6.00 102 153 83 177 235 561 663 118 $8,826.27 page 76 Stainless Steel Safety Hoist Ring Actek swivel hoist rings are designed for lifting. They rotate and pivot to absorb any pitch, roll or sway of unbalanced loads. Will not yield to heavy side loads. Help prevent the lifting hook from disengaging Safety engineered. All loads lifted are especially important from safety standpoint. Actek swivel hoist rings provide the kind of safety that protects men and material against accidents before they occur. For use in outdoor weather and certain chemical and corrosive environments Material: 300 series stainless steel Safety factor: 5:1 Liquid penetrant Mil 6868 360 swivel 180 pivot Stainless Steel Safety Hoist Ring (Unit: inch) *LONG BAR Rated Thread A C D E B F Torque Wt. Load/lb Size Ft/# (lb) 58102 400 5/16-18 0.43 0.71 3/8 0.29 1.27 2.67 3.5 0.3 $191.20 58104 400 5/16-18 0.43 0.71 3/8 0.54 1.27 2.67 3.5 0.3 $191.20 58106 500 3/8-16 0.43 0.71 3/8 0.54 1.27 2.67 6 0.3 $191.20 58602 1,250 1/2-13 0.7 0.93 1/2 1.07 1.84 3.77 14 1 $253.34 58008 1,250 1/2-13 0.88 1.22 3/4 0.78 2.31 4.78 14 2.6 $253.34 *58644 1,250 1/2-13 0.88 1.22 3/4 0.78 4.25 6.72 14 2.6 $285.61 58010 1,250 1/2-13 0.88 1.22 3/4 1.03 2.31 4.78 14 2.6 $253.34 *58646 1,250 1/2-13 0.88 1.22 3/4 1.03 4.25 6.72 14 2.6 $285.61 58012 1,250 1/2-13 0.88 1.22 3/4 1.28 2.31 4.78 14 2.6 $253.34 *58648 1,250 1/2-13 0.88 1.22 3/4 1.28 4.25 6.72 14 2.6 $285.61 58002 2,000 5/8-11 0.88 1.22 3/4 0.78 2.18 4.78 30 2.6 $253.34 58004 2,000 5/8-11 0.88 1.22 3/4 1.03 2.18 4.78 30 2.6 $253.34 *58640 2,000 5/8-11 0.88 1.22 3/4 1.03 4.12 6.72 30 2.6 $285.61 58006 2,000 5/8-11 0.88 1.22 3/4 1.28 2.18 4.78 30 2.6 $253.34 *58642 2,000 5/8-11 0.88 1.22 3/4 1.28 4.12 6.72 30 2.6 $285.61 58014 2,500 3/4-10 0.88 1.22 3/4 1.03 2.06 4.78 50 3 $253.34 *58650 2,500 3/4-10 0.88 1.22 3/4 1.03 4 6.72 50 3 $285.61 58018 2,500 3/4-10 0.88 1.22 3/4 1.53 2.06 4.78 50 3 $253.34 *58654 2,500 3/4-10 0.88 1.22 3/4 1.53 4 6.72 50 3 $285.61 58204 3,500 3/4-10 1.4 1.71 1 1.04 3.06 6.52 50 7 $387.18 *58658 3,500 3/4-10 1.4 1.71 1 1.04 4.65 8.11 50 7 $457.69 58206 3,500 3/4-10 1.4 1.71 1 1.54 3.06 6.52 50 7 $387.18 *58660 3,500 3/4-10 1.4 1.71 1 1.54 4.65 8.11 50 7 $457.69 58202 4,000 7/8-9 1.4 1.71 1 1.04 2.93 6.52 80 7 $387.18 *58656 4,000 7/8-9 1.4 1.71 1 1.04 4.52 8.11 80 7 $457.69 58210 5,000 1-8 1.4 1.71 1 1.29 2.81 6.52 115 7.5 $387.18 *58662 5,000 1-8 1.4 1.71 1 1.29 4.4 8.11 115 7.5 $457.69 58212 5,000 1-8 1.4 1.71 1 1.54 2.81 6.52 115 7.5 $387.18 *58664 5,000 1-8 1.4 1.71 1 1.54 4.4 8.11 115 7.5 $457.69 58214 5,000 1-8 1.4 1.71 1 2.29 2.81 6.52 115 7.5 $387.18 *58666 5,000 1-8 1.4 1.71 1 2.29 4.4 8.11 115 7.5 $457.69 58802 7,500 1 1/4-7 1.75 2.11 1-1/4 1.89 4.12 8.73 235 14 $709.83 58404 12,000 1 1/2-6 2.25 2.81 1-3/4 2.7 6.41 12.47 400 34 $1,016.95 58400 15,000 2-4 1/2 2.25 2.81 1-3/4 2.96 5.91 12.47 400 36 $1,067.14 59002 25,000 2 1/2-8 3 4.09 2-1/4 4 8.03 16.87 1050 88 $3,107.00 59006 25,000 2 1/2-4 3 4.09 2-1/4 4 8.03 16.87 1050 88 $3,107.00 59200 37,500 3-4 3.75 5.27 2-3/4 5 8.48 19.5 2150 166 CALL 59402 50,000 3 1/2-4 4 6.06 3-1/4 7 9.28 22.09 2550 265 CALL Stainless Steel Metric Safety Hoist Ring Rated Thread Load/ Size kg A C D E B F Torque Kgm (Unit: mm) *LONG BAR Wt. (kg) 58912 200 M8x1.25 11 18 10 13 32 68 0.43 0.17 $199.92 58916 250 M10x1.50 11 18 10 18 30 68 0.75 0.17 $199.92 58924 525 M12x1.75 22 30 19 19 60 121 1.85 1.08 $264.18 *59124 525 M12x1.75 22 30 19 19 110 171 1.85 1.08 $297.50 58930 950 M16x2.00 22 30 19 29 56 121 4.2 1.12 $264.18 *59130 950 M16x2.00 22 30 19 29 106 171 4.2 1.12 $297.50 58936 1,075 M20x2.50 22 30 19 34 52 121 7 1.19 $264.18 *59136 1,075 M20x2.50 22 30 19 34 102 171 7 1.19 $297.50 58942 1,500 M20x2.50 36 43 25 32 78 166 7 3.03 $404.60 *59142 1,500 M20x2.50 36 43 25 32 118 206 7 3.03 $478.38 58948 2,100 M24x3.00 36 43 25 37 74 166 7 3.1 $404.60 *59148 2,100 M24x3.00 36 43 25 37 114 206 7 3.1 $478.38 *58950 2,100 M30x3.50 36 43 25 58 108 206 30 3.1 $478.38 58956 3,500 M30x3.50 45 54 32 42 106 222 30 6.3 $742.56 58958 3,500 M30x3.50 45 54 32 62 106 222 30 6.4 $742.56 58966 5,500 M36x4.00 57 71 44 64 166 317 50 15.5 $1,062.67 58968 6,250 M42x4.50 57 71 44 82 160 317 50 16 $1,062.67 58970 6,750 M48x5.00 57 71 44 82 154 317 50 16.8 $1,115.03 58972 11,150 M64x6.00 76 103 57 101 204 428 136.5 39 CALL 58988 15,750 M72x6.00 95 133 70 132 220 495 279.5 74 CALL 58990 22,300 M90x6.00 102 153 83 177 235 561 311.5 118 CALL

KANETEC Telsa Meter KCD-MN (Electric drill is optionally supplied) TM- 701 $680.00 / replacement probe $ 170.00 Detecting DC magnetic flux density AC magnetic fl ux Contents density Polarities (N,S) (50/60Hz) Indication mt/g selection 1T = 10000G Range Indication Range 0 ~1500mT Measuring Mode Measuring Measuring Range Analytical Indication Mode Ability Accuracy Measuring Range Analytical Ability Indication Accuracy DC 1 * CNC Machine Tool Trolley Standard Complete Set includes: Tool trolley Four trays 28 pieces #40 inserts 0 200.0mT 0.1 mt ±(5%of rdg.+ 3digit) 200.1 1500.0mT 1 mt ±(5%of rdg. +10digit) DC 10 0 150.0mT 0.01mT ±(5%of rdg. + 5digit) AC 0 200.0mT 0.1 mt ±(5%of 1 * 200.1 1 mt rdg. 750.0mT +20digit) AC 10 0 75.0mT 0.01mT Function Zero reset Polarity indication Max. detect value hold Auto power off (can be canceled) Display LCD Mode Detect value Numeric value (digital) Polarity Alphabets (N/S) Operating Temperature 0 40 C Power Battery SUM- 3 (1.5 V) x 4 pieces Source Dimension Height 140mm(5.51) width 64mm(2.51) thickness 30 mm(1.18) Mass Approx.250 g/0.54 lb (including batteries and probe) Accessories Probe, batteries and carrying case Option Digital output cable (TM-601DTC) *The measuring ranges are automatically selected. (Note) This product does not correspond to electromagnetic wave measurement. KANETEC Maghand Used to pick up small steel parts, nut/bolts, nails, scrapes, for removal or material handling. Easy to squeeze T handle releases material. Maximum batch of material which can be picked up at one time from 4~9 Lbs., depending on steel content, shape and size Dimensions: 4.49 x8.94 (10A) 4.49 x19.69 (50A) Weight: 3.3 Lbs. (10A) 4.2 Lbs. (50A) KANETEC Hand Lifma HL-20A HMC-10A $60.00 HMC-50A $100.00 HMC-10A Suited for pulling/dragging steel material or steels, and carrying work, metal molds, press die, etc. A new cam mechanism, used to break contact and release, will not scratch the work surface HL-20A $258.00 Max. holding power: 110 LBF (lateral pulling) 440 LBF (lifting up) Dimensions: 3.94 x5.51 x1.26 (WxLxH) Handle length: 7.87 Weight: 5.5 Lbs. HMC-50A KANETEC Magbore Drill Guide Mini size Magbore for drill diameter up to 0.26 (6.5mm) Attaching firmly even to thin plates of 0.2 (5mm) thickness KCD-MN1-MWK1 $750.00 KCD-MNV1 $860.00 Power: Single phase, AC110-120V Magnet dimensions: 4 dia. x 2-3/8 high Overall size (w/o drill): Width 9 ; Height 9.5 (lowered); 11.75 (extended) Holding power: 770 LBF (on 1 thick mild steel) Maximum stroke: 3.9 Weighs only 12.1 Lbs. Universal Magnetic Base Instant universal position with a single knob Accepts indicator w/ dovetails and 3/8" dia. Magnetic on/off base switch (indicator not included) CE300 Hydraulic Arm 4.0 Lb. $95.00 CE312 Wheel Dresser 2.4 Lb. $48.00 CE311PB Magnetic Base 2.5 Lb. $33.00 Rugged steel construction & roomy bottom shelf space Strays put with positive brakes Cruises smoothly on oversized wheels Lift-out tooling tray load or unload tooling individually at separate sites Ideally size measured at: 33.5"x37.5"x25.5" (HxWxD) Weight: 106Lbs. MACHINE TOOL. SHOP SUPPLY KANETEC Hand Magnet Used in a wide range of fi elds: Machining, casting, HMB-7 food chemical processing, etc. Most suitable for collecting/ removing iron pieces mixed in the medium or on fl oor surfaces, material handling, and holding work while buffi ng or other types of operations HMB-7 $119.00 Holding power: 55 LBF Weight: 4.2 Lbs. Holding power: 176 Lbs. Dimensions: 2.4 x2.0 x2.2 Arm length: 13.4 CE310 Mechanical Arm 3.5 Lb. $67.00 Main pole dia.: 0.6 Length: 14.4 CE303N3 Cooling Hose 3.6 Lb. $88.00 Holding power: 308 Lbs. Tapped hole: M8x1.25 Dimensions: 4.7 x2.0 x2.2 CE322PB Magnetic Base 4.5 Lb. $98.00 Tray taper max. pot quantity per tray #30 8 #35 7 #40 7 #45 6 #50 5 GX-102 $335.00 Complete set page 77 GX-102-1 (each) Extra tray$30.00 # GX-102-2 GX-102-3 GX-102-4 GX-102-5 GX-102-6 #50 insert #45 insert #40 insert #35 insert #30 insert $5.00 ea. $4.00 ea. $4.00 ea. $4.00 ea. $3.50 ea.

MACHINE TOOL. SHOP SUPPLY KANETEC Electro-Permanent Magnetic Holder ( KEP) Permanent magnetic holder for long time attraction without trouble of dropping due to power failure.it is turned ON/OFF with electric control. Magnetic force turns OFF(releases)by power supply control and it is turned ON at all other times. The interruptible power supply is not required. Dimensions Holding Power KEP-3C ø1.2 X1.6 33 LBF $118.00 KEP-4C ø1.6 X1.6 55 LBF $181.00 KEP-5C ø2.0 X2.0 77 LBF $232.00 KEP-7C ø2.8 X2.4 198 LBF $303.00 KEP-9C ø3.5 X2.4 330 LBF $354.00 Deluxe Auto. Lubricant Pump Oil tank capacity: 4.0l : CEA-4A $ 465.00 Specification: Operation Intermittent Max outlet volume Durable aluminum alloy construction; Adjustable operation range from 3 sec~3min; adjustable intermittent range from 1 min~ 60 min; 25W motor, single phase, 110V/ 220V power outlet; Autoalarm system reminds you to refi ll; Pump & motor are connected directly to drive; PT 1/8 oil pipe joint oil outlet 4mm/6mm Dimension:10.6 x5.9 x5.9 (LxWxH) Oil tank capacity: 4 l Max outlet pressure motor CEA-4A 3sec~3min 1min~60min 200cc 12kgf/cm 2 110v CEA-4B 3sec~3min 1min~60min 200cc 12kgf/cm 2 220v GROMAX Rockwell Hardness Tester Conform to IS:3804-1966 and BS: 891-1962 Part I & Part II for Rockwell test Standard accessories: 5-3/4" testing table 2-3/16" testing table 2-3/16" testing table with V groove 1200 diamond penetrator 1/16" steel ball penetrator Rockwell A test block (1pc) Rockwell B test block (1pc) Rockwell C test block (3pc) screwdrivers (2) complete instruction manual dustproof plastic cover Wt. RHT 180 Lbs $1760.00 Max. load 330 LBS Max depth of spindle 2 Initial range load 22 LBS below base Depth of throat 5 1/4 Base size 7 x18 Height 24-1/2 Load range 132 LBS 220 LBS 330LBS Penetrator Test scales Diamond 120 Rockwell A ball 1/16 Rockwell B Diamond 120 Rockwell C Suitable for test on case hardened steel : CEA-4B $ 465.00 Annealed ferrous & Non-ferrous metal Annealed hardened & tempered on deep case hardened steel Auto. Lubricant Pump Oil tank capacity:2.0l Motor: 110V 220V Discharge Timer (0~12 seconds-adjustable) Lubricator cycle timer (1~180 minutes-adjustable) Manual feed push button switch Low level fl oating switch 2 liter lubricant reservoir Volt CESD-A 110V $199.00 CESD-B 220V $199.00 Power rating 30W Current 0.8A/110V, 0.3A/220V Discharge Volume 2.2cc/ second Discharge Timer Setting 0~12 seconds Discharge Pressure 120 psi Lubricator cycle timer setting 1~180 minutes Weight 7.9 lbs Auto. Lubricant Pump Effective capacity: 1.7 l, Oil tank capacity:2.0l CESA auto/manual lubricating pumps are ideal accessories for new machines, rebuilt machines and replacement for broken manual one-shot lub pumps. It has capacity of 3-6 c.c. CESA is automatically operate, shop operator still can use the manual lub when it s necessary. : CESA $159.00 Specification: Intermittent MAX. Pressure Motor Time (Min.) (kg/cm3) CESA05A 5 3 110v CESA05B 5 3 220v CESA10A 10 3 110v CESA10B 10 3 220v CESA15A 15 3 110v CESA15B 15 3 220v CESA30A 30 3 110v CESA30B 30 3 220v CESA60A 60 3 110v CESA60B 60 3 220v Manual Pump/Hand Oiler The surface coated by paint is endurable Made of special aluminum alloy and assured no leakage by pressure leakage tests Suitable for general lubrication oil Oil capacity can be adjusted CTA-8L CTA-8R Discharge 8 cc Max. Discharge Pressure 213 psi Tank 600 cc CLA-8 Effective 400 cc Discharge Bore PT1/8 Discharge Ports Left/Right each 1 output CLA-8 (vertical) $59.00 CTA-8R (horizontal-right) $59.00 CTA-8L (horizontal-left) $59.00 page 78 Milling Machine Power Feed For Bridgeport & Bridgeport Type Machine Most Imports. We can upgrade & repair your old power feed. Please call 1800-343-3508 for more infomation Smooth Running With High Torque; New & Stronger Design Assures Long Trouble Free Life; All Spare Parts In Stock For Easier Maintenance Driving... Variable Speed Torque... 235 Series: 135 Lbs/in, 250 Series: 150 Lbs./in Speed Range... 0-200 RPM Rapid Speed... 250 RPM +10% Torque Wt lbs/inch lbs AL-235X Longitudinal Feed 135 16 $420.00 AL-235Y Cross Feed 135 16 $460.00 AL-235Z Knee Feed 135 16 $460.00 AL-250X Longitudinal Feed 150 16 $420.00 AL-250Y Cross Feed 150 16 $460.00 AL-250Z Knee Feed 150 16 $460.00 AL-99 (for mill and drill machine) 125 16 $420.00 GROMAX Air Power Drawbar One-Year Warranty Hand Pressing Lubricator Discharge DIscharge Pressure Tank DIscharge bore ADB158-V Reduce operator fatigue, minimize tool-change-time. Available for most manual & ADB158-S CNC mills with standard R8, #30 or #40 taper tool holders. Easy to install - No special drawbar necessary use the existing drawbar, install in 10 minutes. Pre-connected assembly-use compressed air only, no electrical wiring needed. Operated on shop air supply-fi lter/ lubricator, regulator and gauge are included with each unit provide clean oiled air to ensure long lasting life. Use standard shop air pressure: approximately 90 P.S.I. ADB158-V (variable speed) $595.00 ADB158-S (step pulley) $595.00 8CC 70 psi 1 liter 4 or 6 CKE-8R $59.00 each CKE-8L $59.00 each Suitable for Bridgeport Mill Hand Pull Oiler Discharge 6.5CC DIscharge Pressure 43 psi Length/Max. Length 3.7 /5.7 Stroke 0.9 Outer Dia. 0.75 BME-6 $55.00 each Suitable for Universal Cutter & Tool Grinder G40 (Page. )

20/24/40 Heavy-Duty Digital Caliper Precision Dial Caliper MACHINE TOOL. SHOP SUPPLY Digital Micrometer & Set Extra long 4 jaws Inch/metric Stainless/hardened.0005 resolution ABS/Zero function 6/8/12 Digital Caliper Inch/metric reading On/Off button on front Inside/outside jaws Floating zero function Depth measuring rod Extra large numerals Fitted plastic case DC20 $140.00 DC24 $150.00 DC40 $305.00 DC6 $28.00 DC8 $44.00 DC12 $65.00 Precision V-Block & Clamp Set All v-blocks are square, parallel & centered within 0.0002 ; One reversible swing-away clamp is provided with each v-block; Side slots allow easy clamping to almost any work space; Comes in matched pair Length Width Height Min. Max. GTV200 2-3/8 2-3/8 2 13/64 1-3/16 $76.00 GTV300 4-1/8 4-1/8 3-1/16 9/32 2-9/16 $145.00 Range 141500 (Metric/inch) 0-6 $45.00 141511 (Black) 0-6 $27.00 141512 (White) 0-6 $27.00 141520 (Metric/Inch) 0-8 $55.00 141521 (Black) 0-8 $42.00 141522 (White) 0-8 $42.00 141530 (Metric/Inch) 0-12 $96.00 141531 (Black) 0-12 $84.00 141532 (White) 0-12 $84.00 Made of stainless steel & hardened throughout; Large clear adjustable dial.; 4-way measurements (inside, outside, depth & step); Covered rack for long lasting life & chip free operations; 0.001 graduation/0.1 rev. Deluxe 52 Pieces Steel Clamping Kit Fits all bridge port type machines; Metal rack; Table slot 5/8 ; Stud size: 1/2-13 KT $78.00 Metric Gage Block Set 47 & 87 PCS Anvil & spindle hardened & ground; Carbide tipped faces; Quick & easy zero adjustment; 0.0001 graduation. Range L314524 0-1 $45.00 L314534 1-2 $50.00 L314544 2-3 $55.00 L314554 3-4 NA L314564 0-3 $132.00 (3Pcs/Set) L314574 0-4 NA (4Pcs/Set) L314584 0-6 NA (6Pcs/Set) Outside Micrometer & Set Please check online catalog at www.gromaxonline.com Crisp clear graduations; Hardened & precision ground anvil spindle thread with micro-lap finish on end; Ratchet stop & spanner wrench; Stain chrome finish; 0.0001 graduation; Carbide faces Electronic Digital Micrometer Dial Test Indicator Automatic reversing; Jeweled bearings; Trigger response to lightest pressure; 5/32 & 3/8 diameter shank; Dovetail mounts DI500 DI1000 Graduation 0.0005 0.0001 Range 0.03 0.008 Reading 0-15-0 0-40-0 $37.00 $65.00 Dial Indicator Range DI100 0-1 $12.00 DI200 0-2 $28.00 DI300 0-0.25 $11.00 DI400 0-0.5 $11.00 0.001 graduation 0-100; Stainless steel parts; Jeweled movement; Extra long spring ensure uniform pressure through entire travel of spindle; Easy to read revolution counters Grade 3 Carbide Gage Block Set 81-Pc Hardness HRC 70 Grade 3 accuracy +8 / -4 Millions Comes with case & calibration certifi cation GB207 $650.00 Meets or exceeds federal 666-6-15c; Comes with wooden case & certificate; Made of high grade alloy steel Metric gage block set detail: 87 PCS: 9 blocks 1.001~1.009mm; 49 block set 1.01~1.49mm, 0.1mm steps; 10 blocks 10~100mm, 10mm steps JS Description Grade GB303 1 87 PC $448.00 GB304 2 87 PC $270.00 NIST Calibration Certificate $350.00 87 pcs/ set Gage Block Set 36-Pc & 81-Pc Made of high grade alloy steel. Each set is calibrated to meet or exceeds Federal Specifi cations GGG-G15A. Comes with wooden case & certifi cate; Surface hardness HRC 64; Accuracy: Grade 2 +4 / -2 Millionths Grade 3 +8 / -4 Millionths Grade B +50 / -50 Millionths Grade Description GB201 2 36 PC. $255.00 GB203 B 36 PC. $95.00 NIST Calibration Certificate 36 pcs set $165.00 GB204 2 81 PC. $447.00 GB205 3 81 PC. $275.00 GB206 B 81 PC. $148.00 NIST Calibration Certificate 81 pcs set $300.00 page 79 Inch/metric conversion; Carbide-tipped spindle Range Graduation L314600 0-1 /0-25mm 0.0001 /0.002mm Indicating Micrometer L314600 $101.00 Carbide tipped measuring faces Easy 0 Adjustment Case included Range Graduation L314610 0-1 0.00008 $150.00 L314620 1-2 0.00008 $160.00 Steel Plug Gage Set Uniform 2 length with hardness HRC 61; Smooth fi nish 10 micro or better; Accuracy within 0.0002 Range # Of Gages GB208 0.011-0.060 50 $24.00 GB209 0.061-0.250 190 $48.00 GB210 0.251-0.500 250 $72.00 GB211 0.501-0.625 125 $88.00 GB212 0.626-0.750 125 $105.00 GB213 0.751-0.832 82 $115.00 GB214 0.833-0.916 84 $143.00 GB215 0.917-1.000 84 $178.00

MACHINE TOOL. SHOP SUPPLY Cyanoacrylate Adhesive (CA) CAS/CAI Series Standard Cyanoacrylate (Ethyl Cyanoacrylate) CAG Series Rubber Toughened Cyanoacrylate (Ethyl Cyanoacrylate) CAR Series Odorless Cyanoacrylate (Alkoxy-Alkyl Cyanocrylate) CAA/CAD Series Accelerators & Debonders CAE Series Epoxy CA Series Cyanoacrylate Adhesive (CA) Cyanoacrylate Adhesive/Instant Glue (Wholesale) Cyanoacrylate Adhesive (CA) is an instant, quick-set adhesive. The uniqueness in the setting speed and strength of bonding power is great for automobile, electronics, machines, furniture, precision devices, and musical instrument. CAS/ CAI Thick CAS/ CAI Thin CAS/ CAI Medium CAR Ordorless medium Standard Cyanoacrylate (CAS/CAI) Cyanoacrylate CAD Debonder Grade Viscosity Curing Application 0.5 oz. 1 oz. 2 oz. 16 oz. Speed Thin 5 cps 3 sec. (bond in 1~5 sec.) Used as a wicking grade. Work great on most materials especially balsa wood. Penetrate into the wood more than just a surface. Excellent adhension for model assembly and repair. CAS-105 NA CAS-110 NA CAS-120 $8.99 CAI-1605 $47.99 Medium 100 cps 15 sec. (bond in 5~10 sec.) Thick 700 cps 45 sec. (bond in 10~15 sec.) This gap filling formula fills gap up to.006 with higher strength and good fi xture time bond to balsa wood, plastic, rubber, metal, work well on cardboard and leather. Used as big gap filling. A slightly slow curing grade allows alignment of components. Work well on plastic model assembly. Bond materials include rubber, metal, fiberglass and plastic. CAS-205 NA CAS-305 NA CAS-210 NA CAS-310 NA CAS-220 $8.99 CAS-320 $8.99 CAI-16100 $47.99 CAI-16700 $47.99 Standard Cyanoacrylate (CAS/CAI) / For Large users or refill: Size Grade Viscosity Curing Speed Type CAI-1605 $47.99 16 oz. Thin 5 cps 3 sec. Ethyl CAI-1650 $47.99 16 oz. Thin 50 cps 8 sec. Ethyl CAI-16100 $47.99 16 oz. Medium 100 cps 15 sec. Ethyl CAI-16300 $47.99 16 oz. Medium 300 cps 30 sec. Ethyl CAI-16700 $47.99 16 oz. Thick 700 cps 45 sec. Ethyl CAI-161500 $47.99 16 oz. Thick 1500 cps 90 sec. Ethyl CAI-44 $1,365.00 44 lb. Viscosity includes 5, 100, 300, 700, 1500 cps. 5-gallon industrial package. Ethyl Rubber Toughened Cyanoacrylate (CAG) Grade Viscosity Curing Speed Application 1 oz. 2 oz. Thick 700 cps 45 sec. Excellent for ultra gap filling capabilities. Used where flexibility and vibration resistance is needed. CAG-2510 $7.99 CAG-2520 $14.99 Odorless Cyanoacrylate (CAR) Grade Viscosity Curing Speed Application 1 oz. 2 oz. Thin 5 cps 3 sec. Specially formulated with no odor, no fume to avoid irritating the nose and eyes. Reduce blooming and frosting. Safe for all hobby foam. Excellent adhension balsa, plastic, rubber. CAR-110 NA CAR-120 NA Medium 100 cps 15 sec. Best recommend for clear plastic models. CAR-210 $12.99 CAR-220 $22.99 Accelerator & Debonder (CAA/CAD) Grade Function Application 2 oz. 8 oz. 1 gal. Accelerator Extremely fast acting for instant glue Strong solvent base accelerator force cyanoacrylate cured instantly. Expand gap filling capabilities. CAA-20 $4.99 CAA-80 $10.99 CAA-1280 $48.99 Mild acting for instant glue. Safe use on foam, plastic Mild solvent base accelerator force cyanoacrylate CAA-201 CAA-801 and painted materials cured instantly. Expand gap filling capabilities. $4.99 $10.99 Debonder This debonder is for unsticking of fingers. A few drops will dissolve the cyanoacrylate, and then wash off with hand soap and water CAD-20 $4.99 CAD-80 $10.99 Epoxy (CAE) Working Time Set Time Function 4 oz. 8 oz. 3 min. 5 min. Quick-setting, high strength and waterproof CAE-05 $6.99 CAE-058 $11.99 10 min. 30 min. Slow-setting, high strength and waterproof CAE-30 $6.99 CAE-308 $11.99 page 80

GROMAX Powerful-Hydraulic Radial Drilling Machine Machine made of Meehanite casting with rib striped structure for extra rigidity to handle heavy-duty operation All Gears are made of chrome-molybdenum alloy, hardened and ground, to ensure a durable gearbox Hydraulic clamping system: Easier to operate(simply push a button, stronger and quicker to hold or release) Speed Preset: Preset the spindle speed for the next operation while machining Base plate has T-slots and drain channels Built-in coolant system PH-1312DH shown Specification PH-812DS PH-1312DH PH-1612DH (Cast iron/steel) -Drilling 2 / 1-1/2 2-3/8 / 2 2-5/8 / 2-1/4 -Tapping 1 / 3/4 2-3/8 / 2 2-3/8 / 2 -Boring 4-1/8 / 2-3/4 7 / 4-3/4 7-3/8 / 5 Spindle Stroke 8-1/4 11-13/16 11-13/16 Spindle Bore No. 4 No. 5 No. 5 Spindle Motor 2 HP 5 HP 7.5 HP Net Weight 2800 lbs. 7700 lbs. 8800 lbs. Packing Dimensions 59 x30 x85 91 x40 x101 103 x40 x101 $17,800.00 $41,900.00 $43,800.00 GROMAX Vertical Turret Milling Machine 3HP Spindle Motor, R8 Spindle Taper 4,200 rpm spindle speed with HI-LO gear Hardened & Ground with turcite-b coating guide way C7 Double nut precision acme lead screws for high accuracy and long lasting FC30 Meehanite Casting main frame with annealed & stress relieved for long term reliability Anti rust chrome quill Standard way covers on all three axes Tool box & Tools Precision APEC class7 spindle bearing to ensure spindle run out within 0.0002 One shot lubrication system Built-in Quartz work light MILLING MACHINE & ACCESSORIES GROMAX Heavy Duty Upright Type Drilling Machine Rugged construction - ideal for medium to heavy-duty large holemaking production Large production grade work table: 25.5 x 20 3HP Spindle motor Spindle Speed:75-1525 RPM(12 speeds) Automatic feed: 3 Speeds:0.0039, 0.007, 0.0118 Column diameter: 6.69 21.6 swing Specification: GJ216 Swing Span 21.6 Drilling capacity (steel)1.57, (cast iron)2 Tapping capacity (steel)1, (cast Iron)1.18 Table Travel 19.68 Height 86.6 Net WT. 1360 lbs. Your Cost $8,750.00 GROMAX Vertical Knee Mill Dial Type Machine Size 4V $21,300.00 Table size 12.6 x 52 Longitudinal travel (manual/ 27.6 / 26.8 power) Cross travel (manual/ power) 10 / 9.5 Vertical travel (manual/ power) 14.3 / 13.8 Weight of the machine 6160 LB Overall dimensions (L x W x H) 91 x 69.7 x 80.7 GROMAX Bed Type Universal Milling Machine Specification: MV1054-3EV Table: 10 x 54 Longitudinal travel (X-axis): 36.37 Cross travel: 15.75 Z axis quill travel: 5 Knee travel (manual): 16 Quill diameter: 3.375 (86 mm) Spindle nose to table top (D): 0.75-16.75 (20 426 mm) Load capacity: 704 lb Spindle taper: R8 Spindle Speed (r.p.m.): 70 to 4200 rpm with Hi/Lo gear Transmission of spindle & motor: Timing Belt Spindle center to column front 6.875 to 27.875 (175-707 mm) surface: Ram Travel: 19 (483 mm) Head: Swivel (left/right) : 90 degree Tile (front/back): 45 degree Motor: Spindle motor/max torque: 3HP (Std.) KVA rating: 4KVA, 15amps Coolant pump (optional) 1/8 Hp Lubrication pump: Power requirement: 4 KVA, 3 Phase 208-230 voltage Length X Width X Height (LXWXH): 102 x 77 x 84 Net Weight: 2,900 lbs. $10,240.00 page 81 Individual Catalog is available: www.gromaxonline.com UH-1250A U-1250B U-1000B Work Table WxL 14.4 x72 14.4 x72 14.4 x72 Longitudinal travel 50 50 50 Spindle nose to table 2~20.8 2~20.8 2~20.8 Spindle cente to Arbor arm is used 2~20.8 2~20.8 2~20.8 table (Horizonatal) Arbor arm isn t used 14.4~31.6 Cross travel 21.6 21.6 21.6 Table load max. 2200 Lbs. 2200 Lbs. 2200 Lbs. LengthxWidthxHeight 120 x86 x73.2 120 x86 x73.2 120 x86 x73.2 Floor space 170 x86 170 x86 170 x86 Net weight (approx.) 7040 Lbs. 7040 Lbs. 7040 Lbs. $60,300.00 $58,880.00 $56,240.00 GROMAX Universal Milling Machine Best Tool for Helical Machining Machine 2HU Table size 10 x 35 1/2 Overall dimensions (LxWxH) 55 x 52 x 58 Net Weight 2860 lbs Special $7,950.00

MILLING MACHINE & ACCESSORIES GROMAX Vertical Turret Milling Machine Quality Machine Tool at Affordable 3HP spindle motor, R8 spindle taper 4,200 rpm spindle speed with Hi-Lo gear Hardened & ground with Turcite-B coating guide way C7 Double nut precision acme lead screws for high accuracy and long lasting FC30 Meehanite casting main frame with annealed & stress relieved for long term reliability Anti rust chrome quill Standard way covers on all three axes Tool box & tools Precision APEC class7 spindle bearing to ensure spindle run out within 0.0002 in One shot lubrication system Built-in Quartz work light X-axis power feed & DRO (optional) MV949 shown dro and powerfeed are not included Specification MV949 MV1054 Table 9 x 49 10 x 54 Longitudinal travel (X-axis) 36 36.3 Cross travel 12 15.7 Quill travel (Z axis) 5 5 Knee travel (manual) 16 16 Quill diameter 3 3/8 3 3/8 Spindle nose to table top (D) 3 3/4 to 16 3/4 3 3/4 to 16 3/4 Spindle taper R8 R8 Spindle speed 70 to 4200 rpm with Hi/Lo gear 70 to 4200 rpm with Hi/Lo gear Load capacity 600 lbs 704 lbs Transmission of spindle & Timing Belt Timing Belt motor Spindle center to column 6 7/8 to 27 7/8 6 7/8 to 27 7/8 front surface Ram travel 12 19 Head Swivel (left/right) 90 degree 90 degree tile (front/back) 45 degree 45 degree Motor Spindle motor/max torque 3 HP 3 HP Coolant pump(opt) 1/8 HP 1/8 HP Lubrication pump One shot One shot Power requirement 4 KVA, 3 Phase 208V to 230V (Max) 4 KVA, 3 Phase 208V to 230V (Max) Dimension & Weight Length x width x height 101 x 70 x 82 102 x 77 x 84 Net weight 2600 lbs 2900 lbs $7600.00 $9100.00 GROMAX E.V.S. Head 3 HP MV1054 shown (220V) MH-E300R8 $3,900.00 MH-E300NT $4,840.00 10 Great Reasons to Go EVS-Mill 1. 3HP high efficient motor for high torque output 2. Infinite 0-4500 RPM constant spindle speed. Change in no time (0-4 sec.) 3. C.N.C. vector type A.C. Frequency drive 4. Machine can run on single or three phases without changing the wiring 5. Low maintenance and down time cost because of no plastic insert, key and moving pulley. 6. No RPM changer break down, but accurate reading on RPM to prolong tool life 7. Electronic and mechanical brake for fast spindle stop 8. No belt slippage for high efficient torque output 9. Boring and tapping application 10.Save energy costs up to 35% page 82

GROMAX Precision Vertical Milling Machine Squareways Y & Z axes, hardened & ground to RC52 Rubber way cover for knee and crossfeed way Precision rolled ball screws Licensed Meehanite casting BIJUR autolube system Chrome satin dials Dish-in coolant base All-fuse breakers CNC Ready With All Ball Screws Digital Frequency Drive System Digital inverter motor control provides great versatility through its programmable front panel to fi ne tune motor operatig parameters. MILLING MACHINE & ACCESSORIES AC-3KV AC-3KVF Working surface 10x54 10x54 Longitudinal travel 36 36 Cross travel 16 16 Vertical knee travel 16 16 Ram travel 20 20 T-slot number, size 3, 5/8 3, 5/8 Main motor 3HP 3HP Head moves 90 90 (right to left) Head tilts (front to back) 45 45 Spindle drive Variable Variable Spindle speed 60~4200rpm 50~4500rpm Spindle taper R-8 R-8 Power quill feeds 0.0015, 0.0015, (in./rev.) 0.003, 0.003, 0.006 0.006 Quill diameter (chromed) 3 3 / 8 3 3 / 8 Hydraulic Tapping Machine AC-3KV shown 3HP/ 10 x54 Table Travel: 36 x16 x16 Rapid positioning and high machinery speed increase productivity Lower tap damage plate, higher thread accuracy Tap shall never break for tapping through-hole or blindhole Tapping for heavier work piece requires large work area Lower machining cost than by CNC machine, drilling tapping machine or manual tapping operation Easy operation, no experience required Standard Accessories: Hydraulic Tapping Spindle Parallel Arm Radial Jib Table Mounting Column Choose any six Safety Clutch Work Table and Cart Tapping Adapters Specifi cations: Hydraulic Motor, Pump and Box Computer-Controlled Device HM-22 HM-32 HM-50 For Tap M3~M22 M4~M32 M8~M60 Speed 150~400rpm 0~200rpm 0~100rpm Work Range Max. Radius 59.06 59.06 59.06 Min. Radius 7.87 7.87 7.87 Power Supply 3~x380V; 50Hz 3~x380V; 50Hz 3~x380V; 50Hz Motor 5HP 5HP 7.5HP Hydraulic 2030 Lb/inch 2030 Lb/inch 2030 Lb/inch Pressure Weight 660 Lbs. 715 Lbs. 770 Lbs. $9,900.00 $11,900.00 $15,600.00 page 83 AC-3KVF shown 3HP/ 10 x54 Table Travel: 36 x16 x16 Air Tapping Machine Quill travel 5 5 Weight approx. 3050 Lbs. 3300 Lbs. $9,600.00 $11,400.00 AE Series: Portable Type AE-08-700 AE-12-700 AE-16-700 For Tap M2~M8 M3~M12 M3~M16 Speed 700rpm 400rpm 400rpm Work Range (Max. Radius) 27.56 27.56 27.56 Weight 26.4 Lbs. 26.4 Lbs. 33.0 Lbs. $1,200.00 $1,200.00 $1,900.00 AS Series: Short-Arm AS-08/II AS-12/II AS-16/II For Tap M2~M8 M3~M12 M3~M16 Speed 700rpm 400rpm 400rpm Work Range AT-I Series: Simple AT-08/I AT-12/I AT-16/I For Tap M2~M8 M3~M12 M3~M16 Speed 700rpm 400rpm 400rpm Work Range Max. Radius 63 63 63 Min. Radius 19.7 19.7 19.7 Weight 39.6 Lbs. 39.6 Lbs. 44 Lbs. $1,300.00 $1,300.00 $2,000.00 AT-II Series: Long-Arm AT-08/II AT-12/II AT-16/II For Tap M2~M8 M3~M12 M3~M16 Speed 700rpm 400rpm 400rpm Work Range Max. Radius 74.8 74.8 74.8 Min. Radius 7.87 7.87 7.87 Weight 44 Lbs. 44 Lbs. 48.4 Lbs. $1,680.00 $1,680.00 $2,200.00 AT-20/AT-22: Heavy-Duty AT-20/II AT-22/II For Tap M4~M20 M4~M22 Speed 150/400rpm 90/250rpm Work Range Max. Radius Min. Radius Weight $1,350.00 $1,350.00 $2100.00 Max. Radius 74.8 74.8 Min. Radius 7.87 7.87 Weight 68.2 Lbs. 68.2 Lbs. $2,990.00 $2,990.00

MILLING MACHINE & ACCESSORIES Features 220 Volt/3-Phase One Year Warranty National Dealer Network On-site or Classroom Training Available Financing GROMAX Bed-Type Mill With CENTROID Control System Please visit www.gromax-usa.com www.gromaxonline.com for more bed-type models Features and Table B2VS B3VS Working Surface 10 x54 12 x60 X Axis Travel 30 41 Y Axis travel 18 20 Table Load 1500 LBS 2200LBS Spindle Head Spindle Motor 5HP 5HP Spindle Drive AC Programmable AC Programmable Spindle Taper NT30/40 or R8 NT40 or CAT40 Spindle Speeds 130-5160 rpm 130-5160 rpm Spindle Head Travel - Z Axis 19 23 Quill Diameter 3-3/8 4-1/8 Quill Travel 5 5 Machine Net Weight 4500 LBS 6500 LBS Performance Servo Motors Per Axis 29 /LB.DC 29 /LB.DC Resolution 0.0001 0.0001 Rapid Traverse (x,y,z) 150 IPM 150 IPM (with M400 controller) #40 $39,300.00 $41,300.00 Design and specifi cations are subject to change without notice GROMAX Milling Machine Head For Bridgeport or Bridgeport Type Taiwanese Mills Standard Heavy-duty meehanite castings Hardened & ground square ways Turcite-coated surfaces Hardwheels for all axis Manual or automatic quill Easy to use control with Mastercam Auto lubrication Power draw bar Halogen work light Coolant system Table top enclosure Base chip coolant drop pan Optioal Equipment: Fully Closed Way Covers on Column Rear Column Chip Guard 4th Axis Drive Interface Rotary Table(s) Tooling Package Clamping System Precision CNC Vises Pallet Vises Disitizing and Probing Packages TT-1 Touch-off Kit Second Language Engraving Software 40 /LB Motor Upgrade MPG Handwheel CENTROID M-400 CONTROL WITH CONVERSATIONAL AND G-M CODE PROGRAM- MING. CENTROID M-15 AND M39 CONTROL ALSO AVAILABLE Three Axis Simultaneous Canned Cycles 10 Color LCD Screen With Graphics Fast Setup Parts Pentium Processor 32 Bit PC Based DSP Technology Floppy Drive Coolant Controls** Ethernet Card Output For Auto Lube RS-232 Communication Programmable Spindle Hard Drive M400 Console With Scaled Keyboard Mastercam Level 1 M15 Console With Alpha Numeric Keypad Expandable to 4th Axis* M400 Runs On 220V AC 3-Phase Power Teach Mode M15 Runs On 110V AC Power 2 & 3D Graphics Notes: *Marked item is not available on M15 Math Help **Marked items are optional on M15 Mounting Data: 5 HP Milling head bolt circle is 6.5" 3 HP Milling head bolt circle is 6.0" Complete new mill head for your old machine body or special machinery. Chrome quill with super precision preloaded bearing. Spindle nose taper I.D. 0.0002" / 0.005mm T.I.R. Spindle Taper: R8. Quill power feed: 0.0015"/ 0.003"/ 0.006" rev Quill Travel: 5" / Quill diameter 3 3/8". Power output: Variable speed 220V/440V/3 Step pulley 220V / 3 MH-V100 Variable Speed (3HP/R8 spindle) MH-V200 16 Speed Step Pulley (3HP/R8 Spindle) All other spare parts for Bridgeport or Bridgeport type Taiwanese mills are also available. Please call or fax your inquiry. MH-V400 Variable Speed (5 HP/ NT40 spindle) Spindle range MH-V100 Variable Speed $2,820.00 70~4200rpm MH-V200 16 step Pulley $2,130.00 80~5600rpm MH-V400 Variable Speed 70~3600rpm $3,900.00 MH-E300R8 3HP EVS Head* $3,300.00 MH-E300NT 3HP EVS Head* $3,900.00 *220V price. Extra $250 charge for 440V. **5HP also available. Please call. page 84 EVS Head : MH-E300R8

GROMAX Cartridge Spindle AS Series For CNC Machining Center AS-BT40-A-110-6 SHOWN $3500.00 AS-BT40-B-110-6 SHOWN $4100.00 AS-BT40-C-110-6 SHOWN $5200.00 BS Series For CNC Machining Center BS-BT50-150-5 SHOWN $11000.00 DM4500 Series For CNC Milling Machine Taper Max. Speed (rpm) Motor (HP) PB Series For Surface Grinder Pulley Runout Accuracy Test Bar/300mm (μm) Max. Temperature Rise ( C) AS-CAT40A-075-6 CAT40 6000 10 8YUx40T 8 15 $3,500.00 AS-CAT40A-075-8 CAT40 8000 10 8YUx40T 8 15 $4,100.00 AS-CAT40A-075-10 CAT40 10000 10 8YUx40T 8 15 $5,200.00 AS-CAT40A-110-6 CAT40 6000 10 8YUx40T 8 15 $3,500.00 AS-CAT40A-110-8 CAT40 8000 10 8YUx40T 8 15 $4,100.00 AS-CAT40A-110-10 CAT40 10000 10 8YUx40T 8 15 $5,200.00 AS-CAT40B-075-6 CAT40 6000 10 8YUx40T 8 15 $3,500.00 AS-CAT40B-075-8 CAT40 8000 10 8YUx40T 8 15 $4,100.00 AS-CAT40B-075-10 CAT40 10000 10 8YUx40T 8 15 $5,200.00 AS-CAT40B-110-6 CAT40 6000 10 8YUx40T 8 15 $3,500.00 AS-CAT40B-110-8 CAT40 8000 10 8YUx40T 8 15 $4,100.00 AS-CAT40B-110-10 CAT40 10000 10 8YUx40T 8 15 $5,200.00 AS-CAT40C-075-6 CAT40 6000 10 8YUx40T 8 15 $3,500.00 AS-CAT40C-075-8 CAT40 8000 10 8YUx40T 8 15 $4,100.00 AS-CAT40C-075-10 CAT40 10000 10 8YUx40T 8 15 $5,200.00 AS-CAT40C-110-6 CAT40 6000 10 8YUx40T 8 15 $3,500.00 AS-CAT40C-110-8 CAT40 8000 10 8YUx40T 8 15 $4,100.00 AS-CAT40C-110-10 CAT40 10000 10 8YUx40T 8 15 $5,200.00 Please visit our website at www.gromax-usa.com for more details Highest spinning speed: /5000/6000/8000 rpm Wimble holde diameter: BT50 Power: 15kw/ 22kw Bearing diameter: 7020x4pcs,7018x2pcs Accuracy: Testing bar 300mm/0.01mm Temperature: Room Temperature +20 o C Highest spinning speed: 6000/8000/10000 rpm Wimble holde diameter: BT40/CAT40/DIN40 Power: 7.5kw/ 11kw Bearing diameter: 7014CP4x3pcs,7012CP4x2pcs Accuracy: Testing bar 300mm/0.008mm Temperature: Room Temperature +15 o C DS Series For CNC Milling Machine DS-BT30-0175-8 SHOWN $2900.00 MILLING MACHINE & ACCESSORIES Highest spinning speed: 10000/12000/15000 rpm Wimble holde diameter: BT30/CAT30/DIN30 Power: 1.75kw Bearing diameter: 7008CP4x4pcs DS-BT30-0175-15 (15000rpm) $5400.00 PF Series For Surface/Cylindrical Grinder DM-4500-50-8 SHOWN $3100.00 Highest spinning speed: 8000/10000/12000 rpm Wimble holde diameter: BT40/CAT40/DIN40 Power: 5kw/ 7.5kw Bearing diameter: 7012CP4x2pcs,7010CP4x2pcs Accuracy: Testing bar 300mm/0.008mm Temperature: Room Temperature +15 o C KE Series For Surface/Cylindrical Grinder PB-614A-10 SHOWN $1500.00 PB-618A-20 SHOWN $1600.00 Standard spindle speed: 3600 rpm Conoid diameter: 1/4 Power: 1HP (PB-614), 1.5HP/2HP (PB-618) Bearing diameter: NN3006KP4X1pcs (PB-614) NN3006KP4X1pcs,7208CP4x2pcs (PB-618) Accuracy: Runout (in Taper) 1.5 Temperature: Room Temperature +12 o C DM-80 Series For Tool & Cutter Grinder PF-80A-10-36 SHOWN $1150.00 Spindle Speed: 1200~6000rpm Conoid diameter: 1/5 External threads Power: 1HP/ 2HP Bearing diameter: 7206CP4x4pcs Accuracy: Runout (in Taper) 1.5 Temperature: Room Temperature +10 o C J Series For CNC Turning Center KE-80A-10-60 SHOWN $1090.00 Spindle Speed: 1200~6000rmp Conoid diameter: 1/4 internal threads Power: 1HP/2HP Bearing diameter: 7206CP4x4pcs Accuracy: Runout (in Taper) 1.5 Temperature: Room Temperature +10 o C DM-80-05 SHOWN $1180.00 Spindle Speed: 800~8000rpm double spinning Conoid diameter: 1/4 Power: 1/2HP~2HP Bearing diameter: 7206CP4 Accuracy: Runout (in Taper) 2 Temperature: Room Temperature +12 o C Please visit our website at www.gromax-usa.com for more details page 85 J270A2-6-110-40 SHOWN $8050.00 Highest spinning speed: 4000rpm Chuck diameter: 8 Power: 11kw/15kw/22kw Bearing diameter: NN3020K,234420 Accuracy: Runout (in Spindle Nose) 3 Temperature: Room Temperature +20 o C

MILLING MACHINE & ACCESSORIES Muti-Purpose Universal Right Angle Attachment Milling & Drilling Machine Versatile use: milling, drill and tapping; Sturdy construction not limited to skilled operators; Adjustable headstock can be swung 360 up or down to meet various requirements; Bronze adjustable lead screw nuts; 9 x 30 table, 12 speed, 2 HP, 1 PH Motor Standard Accessories: 3 1/2" Angle mill vise 3" Face Cutter 5/8" Drill Chuck R8 Arbor Set Wt. RF-31 3 660Lbs $2,150.00 RF-31 1 $2,350.00 (stand is not included) Optional Accessories RF-30B.1 Power Table Feed $390.00 RF-30B.2 Floor Stand $240.00 AL-99 Power Feed $390.00 RF-31 Fits all mills with 3-3/8 quill diameter and R8 spindle taper Converts a vertical mill into a horizontal mill Concave & convex grove Made of heat treated alloy steel Set includes: right angle head, arbor support & milling arbor R8 Spindle Description Complete Set URAMHR8 $730.00 Individual components Right Angle Head URAMHC $510.00 Arbor Support URAMHE $215.00 Milling Arbor URAMHG $160.00 NT Spindle Description Complete Set URAMHNT30 $850.00 URAMHNT40 $850.00 (100mm) URAMHNT41 $850.00 (105mm) URAMHNT42 $850.00 (110mm) Individual components Right Angle Head URAMHD $520.00 Arbor Support URAMHF $215.00 Milling Arbor URAMHH $166.00 1 R8 Stub Arbor Portable Electro Magnetic Drill & Tapping Stand MDT-930A Drill 1/4 ~1 1 / 4 6 ~32 Tapping 3/8 ~1 1 / 8 10 ~30 Power 220V 3-Phase Motor (HP) 2 Speed (R.P.M.) 756/456/303/186/127/51 Max. Depth 4.33 Body Movable Size 5.91 Y-Axis Transversal Move 0.79 Turning Degree 330 Electro. Magnetic Size 5.31 X11.02 Electro. Magnetic Force 24500N Height 22.83 Torsion Fixture Standard Fitting 7 Drill Sleeve Standard Fitting 3 Machine Weight 155 lbs. Portable Magnetic Drilling/Tapping Stand page 86 $40.00 Portable! Magnetic Base!! Weight MDT-930A 155Lbs. $3,600.00 * All the drill-sleeves, tapper set, and the clamp set of hole cutter are designed with a rapid adaptor to streamline production * It is designed for tapping, perforating, and drilling by using twisting-drill and center-free-drill. With these 3 functions are very convenient for outdoor work * Most suitable for cutting workpieces that are not easily to be moved. Workpieces are like large steel plate, steel skeleton of building and bridge, heavy- duty machine...etc. PM-A22S Power (AC) 110V, 50/60Hz Motor Rated Output 1350W Motor Rated Ampere 12A Speed without Load 300/750rpm Drill 1/16 ~7/8 Drill Hole Travel 31/4 Body Movable Size 315/16 Turning Degree 60 Y-Axis Transversal Move 0.39 Magnetic Size 4.13 x7.09 x2.76 Magnetic Force 8820N Height 18.11 Machine Weight 60 Lbs. $2,850.00 Vertical Slotting Head Forms intricate shapes, extruded dies and complex patterns; Mounts on the rear of the V-Ram (suitable for any Bridgeport type mills); Easy adjustment to make any key or groove on cone or tilted surface; Vise-type clamping fl ange (Easy mounting and discharging ); Swings the turret 180 to position if over the table and ready to work; Uses a vertical tool motion to shape and slot. VSH-100A(Cutter Set) VSH-100B(Flange) VSH-100 (head) VSH-100A (cutter set) VSH-100B (flange) VSH-100(Tool Cutter) Specification: Stroke: 0-5 Strokes per minute @60HZ 35, 54, 79, 112, 160 Motor: 3/4 HP 3 phase, 220V/60HZ Motor Speed: 1370 rpm All the safety torque fi xtures and drill sleeves are designed with rapid adaptor. This makes it more convenient to change the cutters. With the safety torque device on the tap fi xtures can adjust to various needs. Different materials and sizes need different torque and this can prevent the tap from being damage. The revolving speed can be changed during machining. The reducer is made with synchronizing gears and the gears are absolutely safe. The control panel is located on the top of the machine. This can prevent from damage if the machine falls to the ground. Having six-step variable speed (max.756 rpm & min. 51rpm) offers various selections to cut different materials and different sizes of hole. The total height is 22.5 and the center of gravity is only 11.0. Having a low center of gravity makes the machine stable and secure. VSH-100 $2,700.00 $320.00 $320.00 Sizes: 4mm, 5mm, 6mm, 7mm, 8mm, 10mm Heavy-Duty Gear Head Portable Magnetic Cutting Unit * This drilling machine has 2 speed rates for different sizes of cutting * The coolant tank is built-in the machine body. It reduces the damage of the machine and increases work effi ciency * The cutter-lifting unit is designed with a spindle cylinder which is more durable than conventional slide plate * Most suitable for drilling steel skeleton of building, large steel plate, steam furnace etc PM-50G Power (AC) 110V, 50/60Hz Motor Rated Output 1350W Motor Rated Ampere 12A Speed without Load 300/750rpm Hole 5/8 ~131/32 Magnetic Size 3.94 x7.87 x3.03 Magnetic Force 11760N Height 18.11 Machine Weight 56 Lbs. $2,500.00

Precision Double Clamping Vise This twin vise offer 2 clamping stations, 6 x4 model Ideal for jobs where it is necessary to maximize the number of parts in the work envelop and increase the number of machining sequences Wt.(Lb) in a single setup DL44 (4 ) 44 $1280.00.0002 accuracy DL64 (6 ) 101 $1470.00 In case of different sizes for two work-pieces, the clamping operation can still be performed when the length difference is less than 2.76. Once the center stationery jaw is removed, this vise become a center clamping angle lock vise. This vise can be change into a super open vise by removing the center stationery jaw and then fixing the rear movable jaws. UNIT: (Inch) A B C D E F G DL44 15-5/8 3-3/8 3 1-1/4 3-11/16 4 7-7/8 DL64 20-1/2 4 3-15/16 1-3/4 4-7/8 6 10-9/16 LBS H Wt. 3-15/16 44 5-15/16 101 GROMAX Super Lock Vise Material is highest quality ductile iron 80,000 psi, flame hardened bed, standard swivel base, hardened & ground jaw plates, screws hardened & threads ground 1 lb. of force horizontally, 1/2 lb. of force vertically pushes jaw downward Coolant through & enclosed lead screw Removable hinged handle for fast locking Provides better clamping pressure Eliminates hammering HAV-6.5 has 8 bigger jaw opening than HAV-6 (with the same jaw width, depth and overall length) (Taiwan) (China) HAV-4 New HAV-6T HAV-6C HAV-6.5 HAV-8 HAV-12 Jaw Opening 4 3/16 5 1/2 8 New 8 5/16 13 3/8 Jaw Width 4 1/16 6 6 8 12 1/2 Jaw Depth 1 1/4 1 1/2 1 1/2 2 5 1/4 Overall Length 13 8 1/4 8 1/4 11 27 1/2 Weight 46.3 lbs 138 lbs 150 lbs 195 lbs 320 lbs (Taiwan) (China) $265.00 $330.00 $460.00 $190.00 N/A $630.00 N/A $1450.00 N/A GROMAX Hydraulic Machine Vise Feature: Spring-disc cylinder absorbs vibration in cutting process Alloy steel jaws hardened & ground High tensile strength cast iron body Hardened & ground slide way Adjustable clamping force Enable rigid clamping HH100 HH150 HH200 Jaw width 3.94 5.91 7.87 Jaw height 1.42 2.00 2.44 Jaw open 6.69 11.81 11.81 Total length 16.93 24.41 27.56 Total height 3.70 5.24 6.30 WT(lbs) 60 175 265 $505.00 $650.00 $1,190.00 Multi-Purpose Fixture Vise Feature: Holds odd shapes workpiece; Positive 3-point gripping jaws adjusts jaws position according to the shaped of workpiece Specification: AK 70 AK140 Jaw opening 3 6 Jaw width 2.76 5.51 Overall length 14.7 25.1 Overall height 3.27 5 Weight 20 Lbs 80 Lbs $185.00 $255.00 GROMAX 6 NC Machine Vise Flatness of all sides to.001" guaranteed modes, upright, left and right side. Up to 15,000 lbs. clamping force. page 87 Second Generation Super-Lock Vise NC style allows side by side mounting HMC-6 $395.00 HMC-8 $680.00 Jaw Width Total Height Max. Opening Overall Length Gross Weight HMC-6 6 4.45 6-1/4 17-1/2 68 Lbs. HMC-8 8 7.68 8-1/4 23-5/8 172 Lbs. GROMAX MC Universal Blocks Series (4 Faces Type T Slots) BJB Type HIB Type HIC Type A B C D E F G H I J K BJB500X300B 500 300 550 50 400 200 275 175 150 POR SIZE up to 800x550 HIB500X300T 500 300 550 50 400 200 150 275 175 150 18 POR SIZE up to 800x550 HJC500X300T 500 300 550 50 400 200 150 275 175 150 M16 POR SIZE up to 800x550 Unit: mm, Inch Available Please Call 1800-343-3508 for more details. MILLING MACHINE & ACCESSORIES GROMAX Universal Tilting Rotary Table Feature: Extra deep coolant channel 10 second vernier reading, 2 minute tilt reading Satin chrome dials Super low profi le Heavy duty construction Hardened & ground worm gear Wt. Table diameter HUT300 204 Lbs $2,750.00 12 Table height (horizontal x vertical) 7.25 x 14.57 Center hole/ height (vertical) MT5/ 8.19 Direct indexinng 24 DIV Gear ratio 90:1 Accuracy: Surface to center hole squareness 0.0008 Surface to base parallelism 0.0008 Clamping surface flatness 0.0006 Tapered center bore concentricity 0.0008 Max. cumulative spacing error 45 seconds GROMAX Horizontal and Vertical Rotary Table Max. Variation Inch Flatness Of Clamping Surface (concave):.0006 True Running of Cylindrical Center Bore:.0008 True Running of Tapered Center Bore:.0008 Parallelism Of Clamping Surface To Base:.0008 6 HHV-150 8 HHV-200 GROMAX Super Index Spacer Type CS-8 Can be used as a dividing header or a rotary table & has the feature of milling, drilling, jig boring & many other common machine shop applications. Standard Accessories: 1. 8 3-Jaw chuck 2. 6 Division Masking Plates (2,3,4,6,8,12) 3. 10 Face Plate 10 HHV-250 12 HHV-300 14 HHV-350 Center Hole MT-2 MT-3 MT-3 MT-4 MT-4 WT. (Lbs) 36 77 117 180 225 $350.00 $470.00 $580.00 $690.00 $875.00 Wt CS-8 180 Lbs $1150.00 Specification: Chuck capacity 8 Indexing accuracy 25 sec. Squareness (Base to chuck) (2 pcs set).0008 Max. Parallelism over face.0006 Max. Concentricity of mounting fl ange.0008 T.I.R. Concentricity of chuck.0005 T.I.R. Boring Head C-Type The direct reading adjusting screw is ground after hardening and a plainly marked dial face in non-refl ecting stain chrome allows easy reading and adjustments of 0.0005" or less; With a variety of shanks, this model takes a 1-1/2-18 threaded shank. BC2 BC3 BC4 $59.00 $89.00 $120.00 Actual Size 2 dia 3 dia 4 dia Overall length 2-13/32 3-5/32 3-1/2 Boring bar 1/2 3/4 1 Hole Center Dist. Between Holes 5/8 15/16 1-1/4 Cross hole dia. 1/2 3/4 1 Offset 5/8 1 1-1/16 Weight 2Lbs 5Lbs 7Lbs Straight Shank Dia BC.1/2 1/2 $15.0 BC.3/4 3/4 $15.0 BC.1 1 $15.0 BC.1-1/4 1-1/4 $22.0 Optional Accessories CS-8.1 Tail Stock $246.00 CS-8.2 Dividing Plate $158.00 Shanks and Adapters BC.R8 $25.0 BC.NT30 $32.0 BC.NT40 $40.0 BC.NT50 $75.0 BC.MT#3 $25.0 BC.MT#4 $30.0 BC.MT#5 $65.0

MILLING MACHINE & ACCESSORIES GROMAX Tilting Table Worm and crank handle for easy adjustment. Low profi le design. Adjustable 45 degrees both right and left Angle markings are accurate and easy to read Swivel base available GROMAX Pneumatic Vise Quick operation. Stable and rigid design. Extremely high clamping force. High accuracy and repeatability. Reduces production costs. B A H T-SLOT Weight e HAP-180 5.1 7.1 3.6 0.4 16.5 Lbs. $448.00 HAP-250 7.0 9.8 5.2 0.5 49.5 Lbs. $560.00 HAP-380 10.2 15.0 7.3 0.6 151.8 Lbs. $800.00 HAP-600 12.2 23.6 8.1 0.7 290.4 Lbs. $1,825.00 GROMAX Tilting Table with Swivel Base Worm and crank handle for easy adjustment Low profi le design Adjustable 45 degrees both right and left Angle markings are accurate and easy to read Swivel Base attached This vice can be operated both manually and pneumaticaly. The pneumatic power enables rapid strong clamping of the workpeice which signifi cntly improves productivity. Super-Lock Mechanism ensures jaws are parallel during clamping and eliminates deformation ensuring fi rm and accurate work holding. Design is compact and very simple to operate requiring almost no maintenance. The combination of Pneumatic over Hydraulic Power provides both high speed and extremely high clamping force. These vices are supplied with a mechanical push button valve as standard. A Solenoid Valve is also available for use in automated or unmanned production situations. MODEL B A H T-SLOT Weight e HAP-180S 8.7 10.4 5.3 0.4 26.4 Lbs. $480.00 HAP-250S 12.0 13.8 7.3 0.5 88.0 Lbs. $802.00 HAP-380S 17.2 19.3 9.5 0.6 220.0 Lbs. $1,133.00 GROMAX CNC Multi power Fixed Super Vise A B C D F G H J K Max. Clamping Force/ kg Wt. (kg) HBV-4 145 100 100 145 320 475 100 15 48 0-3500 29 $ 1500.00 HBV-5 157 105 150 145 380 560 130 15 48 0-3500 40 $ 1750.00 HBV-6-157 105 160 147 400 580 160 15 48 0-5000 50 $1850.00 160 HBV-6-157 105 250 147 490 670 160 15 48 0-5000 56 $1950.00 250 HBV-8 170 110 300 147 570 750 200 15 48 0-8000 90 $2100.00 E=18mm, I=14mm, Safety Range=8mm One-Piece Construction provides high rigidity and super precision. Heat Treated Slideways. Super-Lock System holds Jaw down on slideways and prevents Jaw deformation. The vise has 4 reference-surfaces for mounting horizontally sideways or vertically. The patented Multi-Power System built of HIGH GRADE BEARING STEEL provides extremely high clamping pressure. The pressure is more consistent and eliminates all leakage and maintenance problems associated with hydraulic vises. Fixed Hight makes several vises can be used together. This product is suitable for multi-unit applications on both horizontal and vertical CNC Machining Centers as well as Conventional Milling Machines where heavy duty machining requires a very high clamping force. SPECIFICATIONS(Material. FCD 60 Ductile Iron. Hardness HRC 50º) Unit: mm MODEL A B D E F G H I J C1 C2 C3 Weight(kg) HPAC-130 147 95+0.01 80+0.02 18 440 520 131 19 15 70-260 115-305 185-375 47 $1,410.00 HPAC-160 160 105+0.01 80+0.02 18 525 564 161 19 15 85-325 140-375 220-460 65 $1,600.00 HPAC-200 170 110+0.01 100+0.02 18 600 680 201 19 18 90-380 155-440 240-530 95 $2,060.00 GROMAX MULTI-POWER CNC PRECISION FIXED ANGLE VICE FEATURES Shortest Length with Big Jaw Opening Extremely High Accuracy and Repeatability Special MULTI-POWER design enhances clamping force of 0 ~ 6000 KG SPECIFICATIONS(Material. FCD 60 Ductile Iron. Hardness HRC 50º) Unit: mm MODEL A B C C1 D E F G Max. clamping Force H I J K L M Weight(kg) HPAC-130S 147 95+0.01 0-190 155-340 75+0.02 18 42 500 6000 kg 131 19 15 178 55 181 46.5 $1,600.00 page 88

MILLING MACHINE & ACCESSORIES GROMAX CNC PRECISION FIXED VISE This vise has the same features as model HPAC above, but has standard screw clamping instead of the MULTI-POWER SYSTEM. SPECIFICATIONS(Material. FCD 60 Ductile Iron. Hardness HRC 50º) Unit: mm MODEL A B D E F G H I J C1 C2 C3 Weight(kg) HPAV-130 147 95+0.01 80+0.02 18 440 520 131 19 15 70-260 115-305 185-375 47 $1,050.00 HPAV-160 160 105+0.01 80+0.02 18 525 564 161 19 15 85-325 140-375 220-460 65 $1,400.00 HPAV-200 170 110+0.01 100+0.02 18 600 680 201 19 18 90-380 155-440 240-530 95 $1,690.00 GROMAX MULTI-POWER CNC SUPER VISE FEATURES Shortest length with big jaw opening. Extremely high accuracy and repeatability. Specual Multi-power Design enhances clamping forces of 0 ~ 8000 kg SPECIFICATIONS(Material. FCD 60 Ductile Iron. Hardness HRC60º ) Unit: mm MODEL A B C C1 D E F G Max. clamping H I J J1 K K1 L M Weight(kg) PRICE Force HPAQ-160 168 115+0.01 300 195-490 57+0.02 18 560 670 800 kg 168 19 15 21 53 63 110 145 73 $2,030.00 HPAQ-200 187 120+0.01 320 220-540 66+0.02 18 607 717 800 kg 200 19 18 25 66 75 110 168 115 $2,510.00 HPAQ-250 187 120+0.01 350 220-580 66+0.02 18 646 756 800 kg 250 19 18 25 66 75 110 168 156 $3,410.00 GROMAX ALUMINUM VISE SPECIFICATIONS(Material. Alloy Aluminum, Durable hard anodized vice body) Unit: mm MODEL A B C D E F G H I J Weight(kg) crownfl ex4010 115 76 25 140 70 400 12 100 14 18 12.5 $2,690.00 crownfl ex5015 144 95 25 185 80 500 14 150 22 18 30 $3,810.00 The vise body is made from high tensile aluminum alloy and designed for continuous, heavy-duty operation. It is suitable for use with the groove and hole systems of CNC machining centers and milling machines. FEATURES Quick change jaws Double and centralized chucking in one system Centralized chucking for high precision Standard accessory: Extra 2 PC of Moveable Jaw & 1 PC of Fixed Jaw Moveable Jaw and Fixed Jaw are Available for being Ordered Separately. GROMAX CNC VISE IN-ROW FEATURES HRV-series VISE IN-ROW is a kind of multiple clamp vice. Full set of this vice is made from Tool Steel with heat treatment more than HRC 60º of hardness and then ground precisely ensures long life. It enlarges clamping dimension. No matter what shape of working piece, such as square, round, cylindrical or any irregular shapes can be positioned quickly. Precision gear locating datum plane is adjustable so working piece can be fi xed easily. This vice is suitable for CNC Machining Centers and Surface Grinder,..etc. SPECIFICATIONS (Material: Tool Steel, Hardness over HRC 60º ) Unit: mm MODEL A B C D E F G H I J K P KG HRV-5030 $1,550.00 50 300 66 75 25 50 70 80 18 10 30 1.5 7 setup example HRV-5040 $1,680.00 400 80 40 9 HRV-5050 $1,870.00 500 90 50 10 HRV-5060 $2,050.00 600 100 60 11 HRV-5070 $2,320.00 700 110 70 12 HRV-7543 $2,360.00 75 430 85 115 40 75 115 100 18 17 65 2 20 HRV-7553 $2,760.00 530 115 65 25.5 HRV-7563 $2,940.00 630 115 65 29.5 HRV-7573 $3,140.00 730 65 115 33.5 HRV-10055 $4,230.00 100 550 108 125 50 75 75 100 18 17 125 2.5 39.5 HRV-10065 $4,670.00 650 125 75 44 HRV-10075 $4,910.00 750 125 75 49 page 89

MILLING MACHINE & ACCESSORIES Single End Standard length Endmills ***Extended LOC is available. ***Metric sizes are also available. Please call or visit our website at www.gromax-usa.com for details. 30 HELIX/RHS/RHC Coated Code: TA (TiAIN) TC (TiCN) TN (TIN) Diam LOC OAL Shank 2 Fute 3 Flut 4 Flute Sauare End Square End Square End Square End Coated Sauare End 2 flut Ball End 3 flute Ball End Cutting Diam +.000/-.002 Shank Diam +.0000/-.0003 4 flute Ball Ball End End Coated Ball End 1/64 3/64 1-1/2 1/8 33001 36201 32001 $12.46 $14.55 33101 36301 32101 $15.89 $17.98 1/32 3/32 1-1/2 1/8 33002 36202 32002 $9.23 $11.33 33102 36302 32102 $11.80 $13.91 3/64 3/16 1-1/2 1/8 33003 36203 32003 $9.23 $11.33 33103 36303 32103 $11.80 $13.91 1/16 3/16 1-1/2 1/8 33004 36204 32004 $8.59 $10.69 33104 36304 32104 $11.16 $13.27 5/64 1/4 1-1/2 1/8 33005 36205 32005 $8.59 $10.69 33105 36305 32105 $11.16 $13.27 3/32 3/8 1-1/2 1/8 33006 36206 32006 $8.37 $10.47 33106 36306 32106 $10.94 $13.05 7/64 1/2 1-1/2 1/8 33007 36207 32007 $8.37 $10.47 33107 36307 32107 $10.94 $13.05 1/8 1/2 1-1/2 1/8 33008 36208 32008 $7.51 $9.62 33108 36308 32108 $9.88 $11.97 9/64 1/2 2 3/16 33009 36209 32009 $11.60 $14.17 33109 36309 32109 $14.60 $17.17 5/32 9/16 2 3/16 33010 36210 32010 $11.60 $14.17 33110 36310 32110 $14.60 $17.17 11/64 9/16 2 3/16 33011 36211 32011 $11.60 $14.17 33111 36311 32111 $14.60 $17.17 3/16 5/8 2 3/16 33012 36212 32012 $10.74 $13.31 33112 36312 32112 $13.74 $16.31 13/64 5/8 2-1/2 1/4 33013 36213 32013 $14.60 $19.53 33113 36313 32113 $18.25 $23.18 7/32 5/8 2-1/2 1/4 33014 36214 32014 $14.60 $19.53 33114 36314 32114 $18.25 $23.18 15/64 3/4 2-1/2 1/4 33015 36215 32015 $14.60 $19.53 33115 36315 32115 $18.25 $23.18 1/4 3/4 2-1/2 1/4 33016 36216 32016 $12.88 $17.81 33116 36316 32116 $16.53 $21.47 17/64 3/4 2-1/2 5/16 33017 36217 32017 $20.39 $26.40 33117 36317 32117 $25.33 $31.34 9/32 3/4 2-1/2 5/16 33018 36218 32018 $20.39 $26.40 33118 36318 32118 $25.33 $31.34 19/64 13/16 2-1/2 5/16 33019 36219 32019 $20.39 $26.40 33119 36319 32119 $25.33 $31.34 5/16 13/16 2-1/2 5/16 33020 36220 32020 $18.03 $24.04 33120 36320 32120 $22.96 $28.97 21/64 13/16 2-1/2 3/8 33021 36221 32021 $24.90 $31.34 33121 36321 32121 $30.91 $37.35 11/32 13/16 2-1/2 3/8 33022 36222 32022 $24.90 $31.34 33122 36322 32122 $30.91 $37.35 23/64 1 2-1/2 3/8 33023 36223 32023 $24.90 $31.34 33123 36323 32123 $30.91 $37.35 3/8 1 2-1/2 3/8 33024 36224 32024 $21.47 $27.91 33124 36324 32124 $27.48 $33.92 25/64 1 2-3/4 7/16 33025 36225 32025 $33.06 $41.43 33125 36325 32125 $41.43 $49.80 13/32 1 2-3/4 7/16 33026 36226 32026 $33.06 $41.43 33126 36326 32126 $41.43 $49.80 27/64 1 2-3/4 7/16 33027 36227 32027 $33.06 $41.43 33127 36327 32127 $41.43 $49.80 7/16 1 2-3/4 7/16 33028 36228 32028 $30.49 $38.85 33128 36328 32128 $38.85 $47.22 29/64 1 3 1/2 33029 36229 32029 $38.21 $46.80 33129 36329 32129 $47.66 $56.24 15/32 1 3 1/2 33030 36230 32030 $38.21 $46.80 33130 36330 32130 $47.66 $56.24 31/64 1 3 1/2 33031 36231 32031 $38.21 $46.80 33131 36331 32131 $47.66 $56.24 1/2 1 3 1/2 33032 36232 32032 $35.42 $44.01 33132 36332 32132 $44.86 $53.45 9/16 1-1/4 3-1/2 9/16 33034 36234 32034 $61.18 $73.42 33134 36334 32134 $76.85 $89.08 5/8 1-1/2 3-1/2 5/8 33036 36236 32036 $67.61 $80.93 33136 36336 32136 $84.58 $97.88 11/16 1-1/2 4 3/4 33038 36238 32038 $101.96 $117.63 33138 36338 32138 $127.71 $143.39 3/4 1-1/2 4 3/4 33040 36240 32040 $94.45 $110.12 33140 36340 32140 $118.06 $133.72 7/8 1-1/2 4 7/8 33044 36244 32044 $149.18 $167.21 33144 36344 32144 $185.68 $203.71 1 1-1/2 4 1 33048 36248 32048 $155.62 $178.17 33148 36348 32148 $194.26 $216.80 1-1/4 2 4-1/2 1 1/4 32080 $440.04 $482.53 Code Color Type Thickness Hardness Max. Temp. Applications TA (TiAIN) purple-gray PVD 2-5μm 3600HV 87HRC 850C 1560F Sole choice for dry, semi-dry & HSM machining requirements. High hardness and heat resistance for machining toughest materials. TC (TiCN) red-brown PVD 2-5μm 2800HV 84HRC 600C 1110F Very high hardness qualities with excellent lubricity. Multi-layered for higher heat resistance and toughness. Excellent for all kinds of steel. TN (TiN) gold PVD 2-5μm 2700HV 83.5HRC 450C 840F Excellent general purpose coating for all ferrous materials. Good combination of lubricity, heat resistance, and wear characteristics. Corner Rounding Endmills Specialty 4 Straight Flute Form-Relieved with Corner Radius Rounding Endmill Radius Mill specifi cation: Radius +- 0.0005 Pilot Diameter +- 0.0005 Specialty Endmills Series 320-60 High-Helix 60 degree Helix Specifi cations: Cutting Diam +.0000/-.0020 Shank Diam +.0000/-.0003 Sub-Miniature Endmills Twist Drills Fractional Standard length. 25 0 Helix. 118 0 Four-Facet Point Please visit www.gromaxonline.com for more details. Online Complete Catalog is available to download. page 90

VDI Tool Holder DIN69880 GROMAX VDI Tool Holder C1: Square Tool Right-Hand C3: Square Tool Right-Hand Inverted C2: Square Tool Left-Hand C4: Square Tool Left-Hand Inverted C1/C2: Square Tool Right/Left-Hand Dimension (unit: mm) d1 b1 b2 b3 h1(in.) h1 h5 h6 l1 l2 right hand short left hand short 16 43 24 13 1/2 12 20 22 44 5 C1-1612 C2-1612 $200.00 20 52 27 13 5/8 16 25 30 55 7 C1-2016 C2-2016 $210.00 20 65 40 26 5/8 16 25 30 55 7 C1-2016.1* C2-2016.1* $210.00 25 58 33 19 5/8 16 25 30 55 7 C1-2516* C2-2516* $215.00 30 70 35 17 3/4 20 28 38 70 10 C1-3020 C2-3020 $225.00 40 85 42.5 20.5 1 25 32.5 48 85 12.5 C1-4025 C2-4025 $260.00 50 100 50 25.5 1 1/4 32 35 60 100 16 C1-5032 C2-5032 $310.00 60 125 62.5 32.5 1 1/4 32 42.5 62.5 125 16 C1-6032 C2-6032 $609.00 80 160 80 41 1 1/2 40 55 80 160 20 C1-8040* C2-8040* $705.00 C3/C4: Square Tool Right/Left-Hand Inverted Dimension (unit: mm) d1 b1 b2 b3 h1(in.) h1 h6 h7 l1 l2 right hand short left hand short 16 43 24 13 1/2 12 20 22 44 5 C3-1612 C4-1612 $205.00 20 52 27 13 5/8 16 25 30 55 7 C3-2016 C4-2016 $220.00 20 65 40 26 5/8 16 25 30 55 7 C3-2016.1* C4-2016.1* $220.00 25 58 33 19 5/8 16 25 30 55 7 C3-2516* C4-2516* $230.00 30 70 35 17 3/4 20 28 38 70 10 C3-3020 C4-3020 $240.00 40 85 42.5 20.5 1 25 32.5 48 85 12.5 C3-4025 C4-4025 $270.00 50 100 50 25.5 1 1/4 32 35 60 100 16 C3-5032 C4-5032 $325.00 60 125 62.5 32.5 1 1/4 32 42.5 62.5 125 16 C3-6032 C4-6032 $609.00 80 160 80 41 1 1/2 40 55 80 160 20 C3-8040* C4-8040* $740.00 Axial/Radial Toolholder CB1: Axial/Radial Right-Hand CB2: Axial/Radial Left-Hand CB3: Axial/Radial Right-Hand CB4: Axial/Radial Left-Hand CB1/CB2: Axial/Radial Toolholder Right/Left-Hand CB3/CB4: Axial/Radial Toolholder Right/Left-Hand Dimension (unit: mm) Dimension (unit: mm) D B1 B2 B3 H1(in.) H2 H3 H4 L1 L2 right hand left hand D B1 B2 B3 H1(in.) H2 H3 H4 L1 L2 right hand left hand 20 65 40 14 5/8 19 30 25 50 14 CB1-2016 CB2-2016 $270.00 20 65 40 14 5/8 19 30 25 50 14 CB3-2016 CB4-2016 $270.00 30 74 40 18 3/4 26 38 28 70 18 CB1-3020 CB2-3020 $325.00 30 74 40 18 3/4 22 38 28 70 18 CB3-3020 CB4-3020 $325.00 40 85 45 22 1 35 48 32.5 100 22 CB1-4025 CB2-4025 $400.00 40 85 47 22 1 30 48 32.5 100 22 CB3-4025 CB4-4025 $400.00 50 105 55 25 1 1/4 42 60 35 120 25 CB1-5032 CB2-5032 $485.00 50 105 55 25 1 1/4 35 60 35 120 25 CB3-5032 CB4-5032 $485.00 60 125 62.5 30 1 1/4 46 62.5 42.5 135 30 CB1-6032 CB2-6032 $650.00 60 125 62.5 30 1 1/4 42.5 62.5 42.5 135 30 CB3-6032 CB4-6032 $650.00 D1/D2: Axial/Radial Toolholder Right/Left-Hand D1: Axial/Radial Right-Hand D2: Axial/Radial Left-Hand Dimension (unit: mm) D B1 B2 B3 B4 H1(in.) H2 H3 H4 L1 L2 right hand left hand 30 35 17 41 23 3/4 36 35 30 60 42 25 o D1-3020 D2-3020 $480.00 40 42.5 21 47.5 25.5 3/4 36 35 30 60 42 25 o D1-4025 D2-4025 $550.00 50 50 26 55 23 3/4 36 35 30 60 42 25 o D1-5032 D2-5032 $690.00 60 57.5 33 57.5 23 3/4 36 35 30 60 42 25 o D1-6032 D2-6032 $760.00 page 91

VDI Tool Holder DIN 69880 Main Excellent price and quality. Satisfaction Guaranteed! GROMAX VDI Tool Holder Materials: 20MnCr5; Hardness: HRC 58+2; Depending on tools, these VDI Tool Holders Description: can be used for turning, drilling, reaming, milling, and threading operations. Our VDI Tool Holders are designed and manufactured in accordance with DIN69880. They are made of high grade alloy steel with precision machining, heat-treatment and grinding. In addition to the above-mentioned producing processes, they are 100% inspected and checked in order to ensure the best performance and reliability. Turning Toolholder B1: Right-Hand Short B3: Right-Hand Short-Inverted B2: Left-Hand Short B4: Left-Hand Short-Inverted B1/B2: Right/Left-Hand Short Dimension (unit: mm) d1 b1 b2 b3 h1 (in) h1 h5 h6 l1 l2 right hand short left hand short 16 42 23 5 1/2 12 20 22 13 24 B1-1612 B2-1612 $145.00 16 42 23 5 1/2 12 20 22 23 36 B1-1612.1* B2-1612.1* $160.00 20 55 30 7 5/8 16 25 30 16 31 B1-2016 B2-2016 $155.00 20 55 30 7 5/8 16 25 30 26 41 B1-2016.1* B2-2016.1* $160.00 25 55 30 7 5/8 16 25 30 16 30 B1-2516* B2-2516* $155.00 25 55 30 7 5/8 16 25 30 26 40 B1-2516.1* B2-2516.1* $165.00 30 70 35 10 3/4 20 28 38 22 40 B1-3020 B2-3020 $155.00 30 70 35 10 3/4 20 28 38 22 60 B1-3020.1* B2-3020.1* $175.00 40 85 42.5 12.5 1 24 32.5 48 22 47 B1-4025 B2-4025 $180.00 50 100 50 16 1 1/4 32 35 60 30 61 B1-5032 B2-5032 $220.00 60 125 62.5 16 1 1/4 32 42.5 62.5 30 60 B1-6032 B2-6032 $285.00 80 160 80 20 1 1/2 40 55 80 40 78 B1-8040* B2-8040* $585.00 B5: Right-Hand Long B3/B4: Right/Left-Hand Short-Inverted Dimension (unit: mm) d1 b1 b2 b3 h1(in) h1 h6 h7 l1 l2 right hand short left hand short 16 42 23 5 1/2 12 22 20 13 24 B3-1612 B4-1612 $170.00 16 42 23 5 1/2 12 22 20 23 34 B3-1612.1* B4-1612.1* $185.00 20 55 30 7 5/8 16 30 25 16 30 B3-2016 B4-2016 $180.00 20 55 30 7 5/8 16 30 25 26 40 B3-2016.1* B4-2016.1* $190.00 25 55 30 7 5/8 16 30 25 16 30 B3-2516* B4-2516* $185.00 25 55 30 7 5/8 16 30 25 26 40 B3-2516.1* B4-2516.1* $200.00 30 70 35 10 3/4 20 38 35 22 40 B3-3020 B4-3020 $185.00 30 70 35 10 3/4 20 38 35 42 60 B3-3020.1* B4-3020.1* $200.00 40 85 42.5 12.5 1 25 48 42.5 22 44 B3-4025 B4-4025 $220.00 50 100 50 16 1 1/4 32 60 50 30 55 B3-5032 B4-5032 $265.00 60 125 62.5 16 1 1/4 32 62.5 62.5 30 60 B3-6032 B4-6032 $345.00 80 160 80 20 1 1/2 40 80 80 40 75 B3-8040* B4-8040* $585.00 B7: Right-Hand Long-Inverted B6: Left-Hand Long B8: Left-Hand Long-Inverted B5/B6: Right/Left-Hand Long Dimension (unit: mm) d1 b1 b2 b3 h1(in.) h1 h5 h6 l1 l2 right hand long left hand long 16 58 39 5 1/2 12 20 22 13 25 B5-1612 B6-1612 $210.00 16 58 39 5 1/2 12 20 22 23 35 B5-1612.1 B6-1612.1 $217.00 20 75 50 7 5/8 16 25 30 16 31 B5-2016 B6-2016 $218.00 20 75 50 7 5/8 16 25 30 26 41 B5-2016.1 B6-2016.1 $228.00 25 75 50 7 5/8 16 25 30 16 31 B5-2516 B6-2516 $229.00 25 75 50 7 5/8 16 25 30 26 41 B5-2516.1 B6-2516.1 $239.00 30 100 65 10 3/4 20 28 38 22 40 B5-3020 B6-3020 $239.00 30 100 65 10 3/4 20 28 38 42 60 B5-3020.1 B6-3020.1 $248.00 40 118 75.5 12.5 1 25 32.5 48 22 47 B5-4025 B6-4025 $259.00 50 130 80 16 1 1/4 32 35 60 30 61 B5-5032 B6-5032 $320.00 60 145 82.5 16 1 1/4 32 42.5 62.5 30 61 B5-6032 B6-6032 $341.00 80 190 110 20 1 1/2 40 55 80 40 78 B5-8040 B6-8040 $530.00 B7/B8: Right/Left-Hand Long- Inverted Dimension (unit: mm) d1 b1 b2 b3 h1(in.) h1 h6 h7 l1 l2 right hand long left hand long 16 58 39 5 1/2 12 22 20 13 24 B7-1612 B8-1612 $217.00 16 58 39 5 1/2 12 22 20 23 34 B7-1612.1 B8-1612.1 $227.00 20 75 50 7 5/8 16 30 25 16 30 B7-2016 B8-2016 $228.00 20 75 50 7 5/8 16 30 25 26 40 B7-2016.1 B8-2016.1 $239.00 25 75 50 7 5/8 16 30 25 16 30 B7-2516 B8-2516 $238.00 25 75 50 7 5/8 16 30 25 26 40 B7-2516.1 B8-2516.1 $245.00 30 100 65 10 3/4 20 38 35 22 40 B7-3020 B8-3020 $244.00 30 100 65 10 3/4 20 38 35 42 60 B7-3020.1 B8-3020.1 $251.00 40 118 75.5 12.5 1 25 60 50 22 44 B7-4025 B8-4025 $269.00 50 130 80 16 1 1/4 32 60 50 30 55 B7-5032 B8-5032 $341.00 60 145 82.5 16 1 1/4 32 62.5 62.5 30 60 B7-6032 B8-6032 $372.00 80 190 110 20 1 1/2 40 80 80 40 75 B7-8040 B8-8040 $578.00 page 92

GROMAX VDI Tool Holder Axial Toolholder Right/Left-Hand VDI Tool Holder DIN 69880 Dimension (unit: mm) d1 h1(in.) h1(mm) h3 b2 b4 L2 L4 L5 right hand left hand 30 5/8 16 28 16 16 70 16 14 AX3016R AX3016L $251.00 40 3/4 20 32.5 20 20 100 20 16 AX4020R AX4020L $275.00 50 1 25 35 25 25 120 25 28 AX5025R AX5025L $342.00 60 1 1/4 32 42.5 20 32 120 15 28 AX6032R AX6032L $392.00 Axial-Radial Toolholder Right/Left-Hand Dimension (unit: mm) d1 h1/in. h1/mm L2 L3 b1 h3 h4 right hand left hand 30 3/4 20 70 18 70 28 38 AR3020R AR3020L $241.00 40 1 25 103 25 85(R)/88(L) 32.5 48 AR4025R AR4025L $271.00 50 1 1/4 32 126 31 105(R)/111(L) 35 60 AR5032R AR5032L $362.00 60 1 1/4 32 138 31 125 42.5 62.5 AR6032R AR6032L $471.00 80 1 1/2 40 140 35 160 55 80 AR8040R AR8040L $827.00 Boring Bar Holder E1: Internal Coolant Flow E1 E3: TG75/TG100 Style (mm) E3 (TG) d1 d3 collet d1 d2 (in) d2 (mm) d3 d4 d5 d6 h1 h2 L1 L2 L3 L4 L5 E1-20X16 20 5/8 16 48 12 3/8-16 50 23 23 67 54 18 15 35 $152.00 E1-20X20 20 3/4 20 48 12 3/8-16 50 23 23 67 54 18 15 35 $152.00 E1-20X25 20 1 25 48 17 3/8-16 50 23 23 71 59 18 17 40 $160.00 E1-25X16 25 5/8 16 41 12 3/8-16 58 25 25 67 54 18 15 35 $162.00 E1-25X20 25 3/4 20 44 12 3/8-16 58 25 25 67 54 18 15 35 $162.00 E1-25X25 25 1 25 45 17 3/8-16 58 25 25 71 59 18 17 40 $162.00 E1-25X32 25 1 1/4 32 50 24 1/2-13 60 25 25 80 63 22 15 38 $162.00 E1-30X08 30 5/16 8 46 6 1/4-20 68 28 30 67 54 22 15 34 $165.00 E1-30X12 30 1/2 12 46 10 1/4-20 68 28 30 67 54 22 15 34 $165.00 E1-30X16 30 5/8 16 46 12 3/8-16 68 28 30 67 54 22 15 35 $156.00 E1-30X20 30 3/4 20 50 12 3/8-16 68 28 30 67 54 22 15 35 $156.00 E1-30X25 30 1 25 55 17 3/8-16 68 28 30 71 59 22 17 40 $156.00 E1-30X32 30 1 1/4 32 62 24 3/8-16 68 28 30 75 63 22 20 44 $174.00 E1-30X40 30 1 1/2 40 66 32 5/8-11 68 28 30 90 73 22 22 50 $182.00 E1-40X16 40 5/8 16 54 12 3/8-16 83 32.5 67 54 22 15 35 $202.00 E1-40X20 40 3/4 20 54 12 3/8-16 83 32.5 67 54 22 15 35 $202.00 E1-40X25 40 1 25 63 17 3/8-16 83 32.5 75 59 22 17 40 $202.00 E1-40X32 40 1 1/4 32 69 24 3/8-16 83 32.5 75 63 22 20 44 $212.00 E1-40X40 40 1 1/2 40 76 32 5/8-11 83 32.5 90 73 22 22 54 $212.00 E1-40X45 40 1 3/4 45 83 40 5/8-11 83 32 100 83 24 60 $218.00 E1-40X50 40 2 50 81 32 5/8-11 83 32.5 100 83 22 24 60 $212.00 E1-50X20 50 3/4 20 57 12 3/8-16 98 35 67 54 30 15 35 $253.00 E1-50X25 50 1 25 63 17 3/8-16 98 35 80 59 30 17 40 $253.00 E1-50X32 50 1 1/4 32 69 24 3/8-16 98 35 80 63 30 20 44 $253.00 E1-50X40 50 1 1/2 40 76 32 5/8-11 98 35 100 73 30 22 54 $253.00 E1-50X50 50 2 50 88 42 5/8-11 98 35 100 83 30 24 60 $253.00 E1-60X20 60 3/4 20 57 12 3/8-16 123 42.5 80 54 30 15 35 $580.00 E1-60X25 60 1 25 63 17 3/8-16 123 42.5 80 59 30 17 40 $580.00 E1-60X32 60 1 1/4 32 69 24 3/8-16 123 42.5 80 63 30 20 44 $580.00 E1-60X40 60 1 1/2 40 76 32 5/8-11 123 42.5 100 73 30 22 54 $580.00 E1-60X45 60 1 3/4 45 83 40 5/8-11 123 42 100 83 30 22 54 $580.00 E1-60X50 60 2 50 89 40 5/8-11 123 42.5 100 83 30 24 60 $580.00 E1-60X65 60 1 1/2 65 89 40 5/8-18 123 42 100 83 30 22 54 $580.00 E1-80X20 80 3/4 20 57 12 3/8-16 55 55 80 54 40 15 35 $950.00 E1-80X25 80 1 25 63 17 3/8-16 55 55 80 59 40 17 40 $950.00 E1-80X32 80 1 1/4 32 69 24 3/8-16 55 55 80 63 40 20 44 $950.00 E1-80X40 80 1 1/2 40 76 32 1/2-13 55 55 100 73 40 22 54 $950.00 E1-80X50 80 2 50 88 42 1/2-13 55 55 100 83 40 24 60 $950.00 page 93 d1 d3 collet 30 75TG E3-30TG75 $363.00 30 100TG E3-30TG100 $363.00 40 75TG E3-40TG75 $373.00 40 100TG E3-40TG100 $373.00 50 75TG E3-5TG75 $384.00 50 100TG E3-50TG100 $384.00 60 75TG E3-60TG75 $461.00 60 100TG E3-60TG100 $461.00 80 75TG E3-80TG75 $838.00 80 100TG E3-80TG100 $838.00 d1 E3: ER Style (mm) E3 (ER) d3 collet d3 collet 16 ER16 E3-16ER16 $299.00 16 ER20 E3-16ER20 $299.00 20 ER16 E3-20ER16 $315.00 20 ER25 E3-20ER25 $315.00 20 ER32 E3-20ER32 $315.00 20 ER40 E3-20ER40 $315.00 25 ER25 E3-25ER25 $328.00 25 ER32 E3-25ER32 $328.00 30 ER25 E3-30ER25 $339.00 30 ER32 E3-30ER32 $339.00 30 ER40 E3-30ER40 $339.00 40 ER25 E3-40ER25 $349.00 40 ER32 E3-40ER32 $349.00 40 ER40 E3-40ER40 $349.00 50 ER40 E3-50ER40 $360.00 60 ER40 E3-60ER40 $436.00 60 ER50 E3-60ER50 $446.00 d1 Collet is not included.

VDI Tool Holder DIN 69880 E2: Dual External Coolant Flow Collet Chuck d1 d2 in d2 mm d6 d7 d8 d9 h1 h2 L3 L6 L7 G E2-16x06 16 1/4 6 40 7 40 10-32 18 18 13 44 34 5/16-24 $165.00 E2-16x08 16 5/16 8 45 7 40 10-32 18 18 13 44 34 5/16-24 $165.00 E2-16x10 16 3/8 10 45 7 40 10-32 18 18 13 44 34 5/16-24 $165.00 E2-16x12 16 1/2 12 45 7 40 1/4-28 18 18 13 44 34 5/16-24 $165.00 E2-16x16 16 5/8 16 45 7 40 10-24 18 18 13 44 34 5/16-24 $165.00 E2-20x08 20 5/16 8 50 9 40 10-24 23 23 18 50 41 3/8-16 $151.00 E2-20x10 20 3/8 10 50 9 40 1/4-20 23 23 18 50 41 3/8-16 $151.00 E2-20x12 20 1/2 12 50 9 40 1/4-20 23 23 18 50 41 3/8-16 $151.00 E2-20x16 20 5/8 16 50 9 40 1/4-20 23 23 18 50 41 3/8-16 $151.00 E2-20x20 20 3/4 20 50 9 50 1/4-20 23 23 18 50 41 3/8-16 $151.00 E2-20x25 20 1 25 50 9 50 1/4-20 23 23 18 60 51 3/8-16 $151.00 E2-25x08 25 5/16 8 58 12.5 40 1/4-20 25 25 18 50 41 3/8-16 $169.00 E2-25x10 25 3/8 10 58 12.5 40 1/4-20 25 25 18 50 41 3/8-16 $171.00 E2-25x12 25 1/2 12 58 12.5 40 1/4-20 25 25 18 50 41 3/8-16 $171.00 E2-25x16 25 5/8 16 58 12.5 40 1/4-20 25 25 18 50 41 3/8-16 $171.00 E2-25x20 25 3/4 20 58 12.5 58 1/4-20 25 25 18 50 41 3/8-16 $171.00 E2-25x25 25 1 25 58 12.5 58 1/4-20 25 25 18 60 51 3/8-16 $171.00 E2-30x06 30 1/4 6 58 14 55 10-32 28 30 22 60 51 5/8-18 $174.00 E2-30x08 30 5/16 8 68 16.5 55 1/4-20 28 30 22 60 51 5/8-11 $151.00 E2-30x10 30 3/8 10 68 16.5 55 1/4-20 28 30 22 60 51 5/8-11 $151.00 E2-30x12 30 1/2 12 68 16.5 55 1/4-20 28 30 22 60 51 5/8-11 $151.00 E2-30x16 30 5/8 16 68 16.5 55 1/4-20 28 30 22 60 51 5/8-11 $151.00 E2-30x20 30 3/4 20 68 16.5 55 1/4-20 28 30 22 60 51 5/8-11 $151.00 E2-30x25 30 1 25 68 16.5 55 1/4-20 28 30 22 60 51 5/8-11 $151.00 E2-30x32 30 1 1/4 32 68 16.5 68 3/8-16 28 30 22 75 61 5/8-11 $167.00 E2-30x40 30 1 1/2 40 83 41 74 1/2-13 32 30 22 90 74 5/8-18 $190.00 E2-40x08 40 5/16 8 83 20.5 55 1/4-20 32.5 22 75 61 5/8-11 $193.00 E2-40x10 40 3/8 10 83 20.5 55 1/4-20 32.5 22 75 61 5/8-11 $193.00 E2-40x12 40 1/2 12 83 20.5 55 3/8-16 32.5 22 75 61 5/8-11 $193.00 E2-40x16 40 5/8 16 83 20.5 55 3/8-16 32.5 22 75 61 5/8-11 $193.00 E2-40x20 40 3/4 20 83 20.5 55 3/8-16 32.5 22 75 61 5/8-11 $193.00 E2-40x25 40 1 25 83 20.5 55 1/2-13 32.5 22 75 61 5/8-11 $193.00 E2-40x32 40 1 1/4 32 83 20.5 83 1/2-13 32.5 22 75 61 5/8-11 $202.00 E2-40x40 40 1 1/2 40 83 20.5 83 1/2-13 32.5 22 90 76 5/8-11 $202.00 E2-40x45 40 1 3/4 45 83 46 74 1/2-13 32 22 90 74 5/8-18 $219.00 E2-40x50 40 2 50 83 51 83 1/2-13 32 100 86 5/8-18 $227.00 E2-50X12 50 1/2 12 98 26.5 68 3/8-16 35 30 90 76 5/8-11 $211.00 E2-50x16 50 5/8 16 98 26.5 68 3/8-16 35 30 90 76 5/8-11 $211.00 E2-50x20 50 3/4 20 98 26.5 68 1/2-13 35 30 90 76 5/8-11 $211.00 E2-50x25 50 1 25 98 26.5 68 1/2-13 35 30 90 76 5/8-11 $211.00 E2-50x32 50 1 1/4 32 98 26.5 68 1/2-13 35 30 90 76 5/8-11 $211.00 E2-50x40 50 1 1/2 40 98 26.5 98 1/2-13 35 30 90 76 5/8-11 $211.00 E2-50x45 50 1 3/4 45 98 46 95 1/2-13 35 30 90 76 5/8-18 $237.00 E2-50x50 50 2 50 98 26.5 98 1/2-13 35 30 100 86 5/8-18 $211.00 E2-50x65 50 2 1/2 65 102 66 102 1/2-13 42 108 86 5/8-18 $245.00 E2-60x16 60 5/8 16 123 40.5 68 3/8-16 42.5 30 90 76 3/4-16 $277.00 E2-60x20 60 3/4 20 123 40.5 68 1/2-13 42.5 30 90 76 5/16-16 $277.00 E2-60x25 60 1 25 123 40.5 68 1/2-13 42.5 30 90 76 3/4-16 $277.00 E2-60x32 60 1 1/4 32 123 40.5 68 1/2-13 42.5 30 90 76 3/4-16 $277.00 E2-60x40 60 1 1/2 40 123 40.5 98 1/2-13 42.5 30 90 76 3/4-16 $277.00 E2-60x50 60 2 50 123 40.5 98 1/2-13 42.5 30 100 86 3/4-16 $277.00 E2-60x65 60 2 1/2 65 123 66 108 1/2-13 42 30 100 86 5/8-18 $317.00 E2-80x20 80 3/4 20 158 40.5 68 1/2-13 55 30 100 86 5/8-18 $644.00 E2-80x25 80 1 25 158 40.5 68 1/2-13 55 30 100 86 3/4-16 $644.00 E2-80x32 80 1 1/4 32 158 40.5 68 1/2-13 55 30 100 86 3/4-16 $644.00 E2-80x40 80 1 1/2 40 158 40.5 98 1/2-13 55 30 100 86 3/4-16 $644.00 E2-80x50 80 2 50 158 40.5 98 1/2-13 55 30 100 86 3/4-16 $658.00 E2-80x65 80 2 1/2 65 158 66 98 1/2-13 55 40 100 80 3/4-16 $658.00 page 94 Straight ER Style d1/in. d2/in. L6/mm l7/mm Collet SL20-ER25 3/4 1/16~5/8 50 110 ER25 $67.00 SL20-ER32 3/4 3/32~3/4 61 121 ER32 $67.00 SL20-ER40 3/4 1/8~1 62 122.5 ER40 $78.00 SL25-ER25 1 1/16~5/8 50 110 ER25 $67.00 SL25-ER32 1 3/32~3/4 60 116 ER32 $67.00 SL25-ER40 1 1/8~1 62 122 ER40 $78.00 SL32-ER25 1-1/4 1/16~5/8 50.5 115 ER25 $67.00 SL32-ER32 1-1/4 3/32~3/4 56.7 126 ER32 $67.00 SL32-ER40 1-1/4 1/8~1 62 132 ER40 $78.00 SL40-ER25 1-1/2 1/16~5/8 45.6 120.5 ER25 $70.00 SL40-ER32 1-1/2 3/32~3/4 56 131 ER32 $70.00 SL40-ER40 1-1/2 1/8~1 62 137.5 ER40 $88.00 SL45-ER25 1-3/4 1/16~5/8 53.7 132.5 ER25 $70.00 SL45-ER32 1-3/4 3/32~3/4 56 136 ER32 $70.00 SL45-ER40 1-3/4 1/8~1 62 142 ER40 $88.00 SL50-ER25 2 1/16~5/8 61 150 ER25 $77.00 SL50-ER32 2 3/32~3/4 60 150 ER32 $77.00 SL50-ER40 2 1/8~1 63 152.4 ER40 $92.00 Straight TG Style d1/in. d2/in. L6/mm l7/mm Collet TG2075 3/4 3/64~3/4 77.4 147 75TG $295.00 TG20100 3/4 3/32~1 82.1 152 100TG $295.00 TG2575 1 3/64~3/4 77.4 147 75TG $308.00 TG25100 1 3/32~1 82.1 152 100TG $308.00 TG3275 1-1/4 3/64~3/4 77.4 160 75TG $319.00 TG32100 1-1/4 3/32~1 82.1 165 100TG $319.00 TG4075 1-1/2 3/64~3/4 77.4 163 75TG $329.00 TG40100 1-1/2 3/32~1 82.1 168 100TG $329.00 TG4575 1-3/4 3/64~3/4 77.4 166 75TG $331.00 TG45100 1-3/4 3/32~1 82.1 171 100TG $331.00 TG5075 2 3/64~3/4 77.4 179 75TG $340.00 TG50100 2 3/32~1 82.1 184 100TG $340.00 F: Morse Taper (mm) DIN69880 Static Holder/ DIN228 F d1 Morse Taper 20 1 F20MT1 $140.00 30 1 F30MT1 $170.00 2 F30MT2 $170.00 3 F30MT3 $180.00 40 2 F40MT2 $200.00 3 F40MT3 $200.00 4 F40MT4 $210.00 50 2 F50MT2 $250.00 3 F50MT3 $260.00 4 F50MT4 $280.00 60 3 F60MT3 $460.00 4 F60MT4 $460.00 Quick Change Tapping D D1 D2 (mm) A TAPP-ER16 ER25 ER16 32 25 $295.00 TAPP-ER20 ER32 ER20 35 27 $295.00 TAPP-ER25 ER40 ER25 42 30 $305.00

DIN 69880 Tap Holder *Tapper For COllet DIN 6499 D (mm) D1 h3 L d1 TAP d ER 40 34 18 60 1-13 M3-M16 TAP16ER20 $250.00 50 34 25 60 1-13 M3-M16 TAP20ER20 $280.00 68 42 28 68 1-16 M3-M20 TAP30ER25 $310.00 83 42 32.5 73 1-16 M3-M20 TAP40ER25 $320.00 98 50 35 83 2-20 M4-M27 TAP50ER32 $360.00 123 50 42.5 85 2-20 M4-M27 TAP60ER32 $430.00 VDI Keyless Drill Chuck Keyless drill chuck for CNC lathe with VDI tool turret VDI D E3 Type - For Collet DIN6388 VDI Tool Holder DIN69880 unit:mm D D1 D2 D3 H L1 L2 30 2-25 60 68 28 75 22 E3-30-OZ25 $280.00 40 2-25 60 83 32.5 75 22 E3-40-OZ25 $295.00 40 4-32 78 83 32.5 90 22 E3-40-OZ32 $295.00 50 2-25 60 98 35 75 30 E3-50-OZ25 $365.00 50 4-32 78 98 35 90 30 E3-50-OZ32 $365.00 T1 D D1 H1 H2 H3 L1 L2 T1-30-32-65 30 32 65 52 62 65 90 $485.00 T1-30-32-85 30 32 65 52 62 85 108 $485.00 T1-30-32-100 30 32 65 52 62 100 123 $570.00 T1-30-32-120 30 32 65 52 62 120 143 $570.00 T1-40-32-85 40 32 80 65 85 85 112 $640.00 T1-40-40-85 40 40 80 65 85 85 112 $650.00 T1-40-40-100 40 40 80 65 85 100 127 $700.00 A: Distance between flange and chuck D: Dia. of flange L D L mm 1-13 CHK30X13 2.68 3.35 $231.00 1-13 CHK40X13 3.27 3.35 $248.00 3-16 CHK40X16 3.27 3.54 $253.00 1-13 CHK50X13 3.86 3.35 $275.00 3-16 CHK50X16 3.86 3.54 $286.00 Z2: Steel Plug (mm) d1 d3 Z21640 16 40 $32.00 Z2 Z22050 20 50 $35.00 Z22558 25 58 $42.00 Z23068 30 68 $53.00 d1 Z24083 40 83 $57.00 Z25098 50 98 $64.00 d3 Z260123 60 123 $72.00 Z280158 80 158 $222.00 Z2: Plastic Plug (mm) D D1 H L Z23068.P 30 68 26.5 16 $30.00 Z24083.P 40 82 32 20 $30.00 Toolholder Blank A2 L2 d1 A2: Round (mm) d1 d2 L2 A164060 16 40 60 $105.00 A205070 20 50 70 $139.00 A2052160 20 52 160 $139.00 A255880 25 58 80 $139.00 A2558200 25 58 200 $188.00 A3068100 30 68 100 $188.00 A3068150 30 68 150 $188.00 A3070200 30 70 200 $205.00 A3068240 30 68 240 $205.00 A4083120 40 83 120 $205.00 A4083150 40 83 150 $213.00 A4083200 40 83 200 $279.00 A4083320 40 83 320 $321.00 A5098135 50 98 135 $321.00 A5098220 50 98 220 $321.00 A5098400 50 98 400 $411.00 A60123150 60 123 150 $387.00 A60123250 60 123 250 $387.00 A60123480 60 123 480 $537.00 A80158XXX 80 158 XXX $579.00 A80158500 80 158 500 $689.00 page 95 T1-ER Type D DIN 69880 D1 X T1-X3 D D1 H1 H2 H3 L1 L2 L3 L4 T1-30-3X25 30 25 65 65 62 42 85 128 148 $600.00 T1-30-3x32 40 32 80 65 85 50 85 120 148 $650.00 S H1 H2 H3 L1 L2 30 32 ER25 1-16 42 65 52 62 65 90 T1-30-32-65-25X2 $465.00 30 32 ER25 1-16 42 65 52 62 85 108 T1-30-32-85-25X2 $465.00 30 32 ER25 1-16 42 65 52 62 100 123 T1-30-32-100-25X2 $575.00 30 32 ER25 1-16 50 65 52 62 120 143 T1-30-32-120-25X2 $575.00 40 32 ER25 1-16 50 80 65 85 85 112 T1-40-32-85-25X2 $610.00 40 40 ER32 2-20 50 80 65 85 85 112 T1-40-40-85-32X2 $610.00 40 40 ER32 2-20 50 80 65 85 100 127 T1-40-40-100-32X2 $610.00 E2-X2 D D1 D1 L1 L2 L3 L4 DIN6980 inch mm E2-30-2X25-35 30 1 25 65 60 35 56.5 $528.00 E2-40-2X40-65 40 1-1/4 40 80 80 65 91.5 $704.00

VDI Tool Holder DIN69880 PM Collet Chuck ER Style Right Hand Peripheral Mounted VDI d1 B1 B2 B3 H1 H2 L1 L2 L3 PM3025ER 30 53 50.5 35 67 33.5 92 70 44 $520.00 PM4032ER 40 72 57 42.5 96 48 125 100 65 $625.00 PM Collet Chuck - Double ER Style Right Hand Peripheral Mounted VDI d1 B1 B2 B3 H1 H2 L1 L2 L3 PM3025ER-D 30 53 50.5 35 67 33.5 92 70 44 $645.00 PM4032ER-D 40 72 57 42.5 96 48 125 100 65 $745.00 PM Offfset ID Boring Bar Holder Right Hand Peripheral Mounted VDI d1 D2 B1 B2 B3 H1 H2 L1 L2 PM3025RL 30 1 60 95 60 31 62 88 114 $595.00 PM3025RS 30 1 60 95 60 31 62 70 96 $561.00 PM4032RL 40 1-1/4 63 100 50 43 86 105 135 $625.00 PM4032RS 40 1-1/4 63 100 50 43 86 85 115 $545.00 PM Offfset ID Boring Bar Holder Left Hand Peripheral Mounted VDI d1 D2 B1 B2 B3 H1 H2 L1 L2 PM3025LL 30 1 60 95 60 31 62 88 114 $595.00 PM3025LS 30 1 60 95 60 31 62 70 96 $561.00 PM4032LL 40 1-1/4 63 100 50 43 86 105 135 $625.00 PM4032LS 40 1-1/4 63 100 50 43 86 85 115 $545.00 page 96

PM Straight ID Boring Bar Holder Left Hand Peripheral Mounted VDI VDI Tool Holder DIN69880 d1 D2 B1 B2 H1 H2 L1 L2 PM3020LL 30 3/4 35 70 31 62 88 114 $565.00 PM3020LS 30 3/4 35 70 31 62 69 95 $521.00 PM4025LL 40 1 43 86 42.5 85 140 179 $590.00 PM4025LS 40 1 43 86 42.5 85 110 149 $545.00 Bushing Morse Taper Type Bushing Type Z D1 L MT 1 2 3 4 32 65 E32-MT1 E32-MT2 E32-MT3 E32-MT4 $68.00 $68.00 $68.00 $68.00 40 75 E40-MT1 E40-MT2 E40-MT3 E40-MT4 $72.00 $72.00 $72.00 $72.00 50 85 E50-MT1 E50-MT2 E50-MT3 E50-MT4 $84.00 $84.00 $84.00 $84.00 D2 L D1 D1 L D2 6MM 1/4 8MM 5/16 10MM 3/8 12MM 1/2 16MM 5/8 20MM 3/4 25MM 1 32MM 1-1/4 40MM 1-1/2 20MM 50MM Z86-40.1/4 Z86-40.5/16 Z86-40.3/8 Z86-40.1/2 Z86-40.5/8 / / / / 3/4 $71.00 $71.00 $71.00 $71.00 $71.00 25MM 50MM Z86-41.1/4 Z86-41.5/16 Z86-41.3/8 Z86-41.1/2 Z86-41.5/8 Z86-41.3/4 / / / 1 $77.00 $77.00 $77.00 $77.00 $77.00 $77.00 32MM 60MM Z86-42.1/4 Z86-42.5/16 Z86-42.3/8 Z86-42.1/2 Z86-42.5/8 Z86-42.3/4 Z86-42.1 / / 1-1/4 $88.00 $88.00 $88.00 $88.00 $88.00 $88.00 $88.00 40MM 75MM Z86-43.1/4 Z86-43.5/16 Z86-43.3/8 Z86-43.1/2 Z86-43.5/8 Z86-43.3/4 Z86-43.1 Z86-43.1-1/4 / 1-1/2 $88.00 $88.00 $88.00 $88.00 $88.00 $88.00 $88.00 $88.00 50MM 85MM / Z86-45.5/16 Z86-45.3/8 Z86-45.1/2 Z86-45.5/8 Z86-45.3/4 Z86-45.1 Z86-45.1-1/4 Z86-45.1-1/2 2 $102.00 $102.00 $102.00 $102.00 $102.00 $102.00 $102.00 $102.00 VDI Bar Puller VDI Bar Puller to fit your DIN 69880 VDI 30MM and 40MM Turret and allow you the flexibility to hold a variety of shapes and Diameters of Material: Flat, Hex, Square and Round. Gripping Range: 1/8 to 3 1/8 Diameter. D A B C E BP-30 30mm 100 1/8~3-1/8 114 55 $570.00 BP-40 40mm 100 1/8~3-1/8 114 63 $595.00 Omni & Mini Omni Bar Puller Description Shank Dia. OD Length (In.) (In.) (In.) MP-001 Mini puller 0.625 3 / 16-1 1 / 8 2.250 4 $395.00 OP-1000 Omni puller 1.0 3 / 16-3 3.750 6 $450.00 The Omni Puller is either coolant or air activated. The special adaptor can be easily removed for internally activated applications. The Omni Puller is mounted in two basic ways. Internally Activated - Applications are very common and very easy to mount. Internally activated applications require you to remove the coolant/air adaptor. You must have a minimum of 15 P.S.I. to activate the unit (maximum 80 P.S.I.). Externally Activated - Applications are commonly used with a CNC Turret boring bar holder attachment, or with another style tool holder. These holders must have coolant access ports. These ports can be connected with an external line to the threaded hole of the coolant/air adaptor (thread size 1/8-27 NPT). Your external outside coolant system must have a minimum of 15 P.S.I. to actuated the Puller (15 P.S.I. = 107 lbs. clamping force). Fingers & Finger Sets for MP-001 / OP-1000 Individual Hardened Steel 50 RC Fingers, Soft Steel Fingers, Soft Aluminum Fingers each $20.00 page 97

VDI Tool Holder DIN 5480 Coupling to DIN5480 SAUTER TYPE Coupling to DIN5482 SAUTER TYPE Axial Driven Tools (DIN 5480) Coupling: 5480 Machine Type VDI Turret Mfg Dia Benzinger TNI 25 Sauter Boehringer NG 180, NG 200 40 Sauter Doosan S 280M 25 Sauter Doosan S 310M, S 310SM, S 310SLM 30 Sauter Doosan V 420M, V420TM, V 550M, V 550TM 50 Sauter Doosan Z 280TM 40 Sauter Doosan Z 290M, Z 290SM 30 Sauter Doosan Z 340SM 30 Sauter Doosan V 850M, V850TM 60 Sauter Emco ET 332 MC 25 Emco 332 Emco ET 365 MC 30 Emco 365 Emco ET 465 MC 30 Emco 365 Emco HT 665 30 Emco 365 Emco HT 690 40 Emco 690 Fortune NVTurn 26BCV, 26YCV 40 Sauter Gildemeister CTX 200 S2, V3 20 Sauter Gildemeister CTX 200 Twin 20 Sauter Gildemeister CTX 320 linear 30 Sauter Gildemeister CTX 320 linear with subspindle 30 Sauter Gildemeister CTX 400 Twin 30 Sauter Gildemeister CTX 420 linear 40 Sauter Gildemeister CTX 420 linear with subspindle 40 Sauter Machine Type VDI Turret Mfg Dia Gildemeister GMX 300, GMX 400 linear 40 Sauter Gildemeister GMX 500 linear 40 Sauter Gildemeister MF Twin 42, 65 30 Sauter Gildemeister Twin 42 25 Sauter Gildemeister Twin 42 30 Sauter Gildemeister Twin 42 40 Sauter Gildemeister Twin 50, 70 30 Sauter Gildemeister Twin 65, 102 30 Sauter Gildemeister Twin 65, 102 40 Sauter Gildemeister Twin 500 linear 40 Sauter Gildemeister CTV 200, CTV 250 linear 40 Sauter Graziano GT 300 with subspindle 30 Sauter Graziano GT 400 with subspindle 30 Sauter Graziano GT 500 with subspindle 40 Sauter Hardinge Elite 8/51 30 Sauter Magdeburger M160U-4, M160GS-4, M160GU-4 40 Sauter Magdeburger MV100 30 Sauter Monforts DNC 3 30 Sauter Niles NF 13, NF 16, NF 20, NV 20 40 Sauter Niles NF 13, NF 16, NF 20, NV 20 30 Sauter Victor NVTurn 26BCV, 26YCV 40 Sauter Weiler DZ 45 with supspindle 25 Sauter Weiler DZ 67 V3 30 Sauter WFL M30 40 Sauter FORCE ONE DOUBLE SPINDLE DOUBLE TURRET 30 SUTER 0.5.901.016 Axial Drilling & Milling Head w/ Collet Chuck SAUTER TYPE Applications: For Endmilling, Drilling, Reaming *With IC For Clockwise and anti-clockwise rotation To be used for collet 6499 External coolant supply Collet is not included DA20548020K $1,850.00 DA30548025K $1,990.00 DA40548032K $2,210.00 A1 Coupling to DA50548040K DIN5480 DA605480xxK **IC: Internal Coolant DIN 5480 D X S MAX. i A B C P DIN69880 r.p.m. DIN5480 DA20548020 20 1-13/ER20 34 6000 1:1 79 48 W10x0.8 $1,280.00 DAI30548025A 30 1-16/ER25 42 6000 1:1 70 55 68 W16X0.8 $1,280.00 DAC30548025 30 1-16/ER25 42 6000 1:1 85 55 68 W16X0.8 $1,400.00 DA30548025 30 1-16/ER25 42 6000 1:1 101 70 68 W16X0.8 $1,460.00 DA40548032 40 2-20/ER32 50 6000 1:1 90 55 86 W20X0.8 $1,580.00 DA50548040 50 3-26/ER40 63 6000 1:1 128 93 40 W21X1.25 $2,350.00 DA605480xx 60 6000 1:1 $2,950.00 Axial Tapping Head w/ Collet Chuck Coupling to DIN1809 DUPLOMATIC TYPE Spur Coupling (IT) DUPLOMATIC TYPE Spur Coupling (MT) BARUFFALDI TOEM VDI A B C Z E MT: Baruffaldi Type Frontal transmission coupling gear is fixed 30 59 15.2 24 6 TOEM160 40 68 17.2 32 8 TOEM200 50 84 20.5 40 8 TOEM250 IT: Duplomatic Type Frontal transmission coupling gear is retractable 20 45 12 20 8 MDT1 30 60.5 12 20 8 MDT1 40 68.5 18 30 10 MDT2 50 83.5 18 30 10 MDT2 D X S MAX. i A B C P DIN69880 r.p.m. DIN5480 TDA30548016 30 1-10/ER16 32 3000 1:1 115 70 68 W16X0.8 $1,450.00 TDA40548020 40 1-13/ER20 35 3000 1:1 120 55 86 W20X0.8 $1,650.00 TDA50548032 50 2-20/ER32 3000 1:1 138 85 40 W21X1.25 $2,350.00 Axial Cutting Head to DIN 6358 To be used for cutter arbor according to DIN 6358 Applications: For various cutters Delivered: Complete with intermediate rings and coolant pipe A7 DIN 5480 D X S MAX. i A B C G P DIN69880 DIN6358 r.p.m. DIN5480 DA30548016C 30 16 32 3000 1:1 91.5 70 68 27 W16X0.8 $1,496.00 DA40548016C 40 16 32 3000 1:1 68.5 55 86 27 W20X0.8 $1,733.00 DA40548022C 40 22 32 3000 1:1 68.5 55 86 31 W20X0.8 $1,843.00 DA50548022C 50 22 40 3000 1:1 129 85 45 W21X1.25 $2,305.00 page 98

VDI Tool Holder DIN 5480 Radial Driven Tools (DIN 5480) Axial Drilling & Milling Head Offset w/ Collet Chuck To be used for cutter arbor according to DIN 6499 External coolant supply Collet is not included A16 DIN 5480 D X S MAX. i A B C P DIN69880 r.p.m. DIN5480 DA3054802529 30 1-16/ER25 42 4000 1:1 100 29 60 W16X0.8 $2,450.00 DA4054803250 40 2-20/ER32 50 4000 1:1 113 50 80 W20X0.8 $2,750.00 *** Double Speed With IC DA3054802529K DA4054803250K IC: Internal Coolant Double Torque DA3054802529/2 DA4054803250/2 Max 2000rpm Double Torque w/ic DA3054802529/2K DA4054803250/2K Max 2000rpm Double Speed DA3054802529*2 DA4054803250*2 Max 8000rpm Double Speed w/ IC DA3054802529*2K DA4054803250*2K Max 8000rpm Axial Drilling & Milling Head w/ Double Collets, Y Offset To be used for cutter arbor according to DIN 6499 External coolant supply Collet is not included A19 DIN 5480 D X S MAX. i A B C E F G H P DIN69880 r.p.m. DIN5480 DA30548016DY 30 1-10/ER16 32 4000 1:1 83 58.5 24 80 95 40 47.5 W16X0.8 $2,650.00 Radial Drilling & Milling Backward Head Applications: For Endmilling, Drilling, Reaming. To be used for collet DIN 6499 For clockwiseand counter-clockwise rotation. External coolant supply Collet is not included R8 DIN 5480 D X S MAX. i A B C E F G M P DIN69880 r.p.m. DIN5480 BR3054802569 30 1-16/ER25 42 5000 1:1 95 60 42 75.5 31.5 28.5 69 W16X0.8 $2,650.00 BL3054802569 30 1-16/ER25 42 5000 1:1 95 60 42 75.5 31.5 28.5 69 W16X0.8 $2,650.00 BR4054803290 40 2-20/ER32 50 5000 1:1 124 80 44 110 42 34 90 W20X0.8 $2,950.00 BL4054803290 40 2-20/ER32 50 5000 1:1 124 80 44 110 42 34 90 W20X0.8 $2,950.00 With IC BR2054802057K $3,950.00 BL2054802057K $3,950.00 BR3054802569K $4,150.00 BL3054802569K $4,150.00 BR4054803290K $6,000.00 BL4054803290K $6,000.00 IC: Internal Coolant Double Torque BR2054802057/2 BL2054802057/2 BR3054802569/2 BL3054802569/2 BR4054803290/2 BL4054803290/2 Max 2500rpm Double Torque w/ic BR2054802057/2K BL2054802057/2K BR3054802569/2K BL3054802569/2K BR4054803290/2K BL4054803290/2K Max 2500rpm page 99

VDI Tool Holder DIN 5480 Radial Tapping Backward Head R1 DIN 5480 D X S MAX. i A B C E F G M P DIN69880 r.p.m. DIN5480 TBR2054801657 20 1-10/ER16 34 3000 1:1 82 52 49 78 26 37 57 W10X0.8 $3,010.00 TBL2054801657 20 1-10/ER16 34 3000 1:1 82 52 49 78 26 37 57 W10X0.8 $3,010.00 TBR3054801669 30 1-10/ER16 32 3000 1:1 95 60 44 75.5 31.5 32 69 W16X0.8 $3,250.00 TBL3054801669 30 1-10/ER16 32 3000 1:1 95 60 44 75.5 31.5 32 69 W16X0.8 $3,250.00 TBR4054802090 40 1-13/ER20 35 3000 1:1 124 80 50 110 42 34 90 W20X0.8 $3,570.00 TBL4054802090 40 1-13/ER20 35 3000 1:1 124 80 50 110 42 34 90 W20X0.8 $3,570.00 Radial Driven Tools (DIN 5480) Radial Drilling & Milling Forward Head Applications: For Endmilling, Drilling, Reaming. To be used for collet DIN 6499 For clockwiseand counter-clockwise rotation. External coolant supply Collet is not included R12 D X S MAX. i A B C F G M P DIN69880 r.p.m. DIN5480 FR2554802555 25 1-16/ER25 42 5000 1:1 55 W16X0.8 $1,990.00 FL2554802555 25 1-16/ER25 42 5000 1:1 55 W16X0.8 $1,990.00 FR2554802585 25 1-16/ER25 42 5000 1:1 85 W16X0.8 $1,990.00 DIN 5480 FL2554802585 25 1-16/ER25 42 5000 1:1 85 W16X0.8 $1,990.00 FR25548025100 25 1-16/ER25 42 5000 1:1 100 W16X0.8 $1,990.00 FL25548025100 25 1-16/ER25 42 5000 1:1 100 W16X0.8 $1,990.00 FR3054802555 30 1-16/ER25 42 5000 1:1 97 64 74.5 41 26 55 W16X0.8 $1,990.00 FL3054802555 30 1-16/ER25 42 5000 1:1 97 64 74.5 41 26 55 W16X0.8 $1,990.00 FR3054802585 30 1-16/ER25 42 5000 1:1 117 64 74.5 41 26 85 W16X0.8 $1,990.00 FL3054802585 30 1-16/ER25 42 5000 1:1 117 64 74.5 41 26 85 W16X0.8 $1,990.00 FR30548025100 30 1-16/ER25 42 5000 1:1 127 64 74.5 41 26 100 W16X0.8 $2,300.00 FL30548025100 30 1-16/ER25 42 5000 1:1 127 64 74.5 41 26 100 W16X0.8 $2,300.00 FR4054803265 40 2-20/ER32 50 5000 1:1 99 80 71 40 23 65 W20X0.8 $2,300.00 FL4054803265 40 2-20/ER32 50 5000 1:1 99 80 71 40 23 65 W20X0.8 $2,300.00 FR4054803285 40 2-20/ER32 50 5000 1:1 119 80 71 40 23 85 W20X0.8 $2,300.00 FL4054803285 40 2-20/ER32 50 5000 1:1 119 80 71 40 23 85 W20X0.8 $2,300.00 FR40548032100 40 2-20/ER32 50 5000 1:1 134 80 71 40 23 100 W20X0.8 $2,470.00 FL40548032100 40 2-20/ER32 50 5000 1:1 134 80 71 40 23 100 W20X0.8 $2,470.00 With IC Double Torque Double Torque w/ic Double Speed FR2054802065K FR2054802065/2 FR2054802065/2K FR2054802065*2 FL2054802065K $2,500.00 FL2054802065/2 FL2054802065/2K FL2054802065*2 FR3054802555K $2,500.00 FR3054802555/2 FR3054802555/2K FR3054802555*2 FL3054802555K $2,500.00 FL3054802555/2 FL3054802555/2K FL3054802555*2 FR3054802585K $2,500.00 FR3054802585/2 FR3054802585/2K FR3054802585*2 FL3054802585K $2,500.00 FL3054802585/2 FL3054802585/2K FL3054802585*2 FR30548025100K $2,750.00 FR30548025100/2 FR30548025100/2K FR30548025100*2 FL30548025100K $2,750.00 FL30548025100/2 FL30548025100/2K FL30548025100*2 FR4054803265K $2,750.00 FR4054803265/2 FR4054803265/2K FR4054803265*2 FL4054803265K $2,750.00 FL4054803265/2 FL4054803265/2K FL4054803265*2 FR4054803285K $2,750.00 FR4054803285/2 FR4054803285/2K FR4054803285*2 FL4054803285K $2,750.00 FL4054803285/2 FL4054803285/2K FL4054803285*2 FR40548032100K $3,050.00 FR40548032100/2 FR40548032100/2K FR40548032100*2 FL40548032100K $3,050.00 FL40548032100/2 FL40548032100/2K FL40548032100*2 IC: Internal Coolant Max 2500rpm Max 2500rpm Max 8000rpm Double Speed w/ IC Double Speed w/ IC FR2054802065*2K FR4054803265*2K FL2054802065*2K FL4054803265*2K FR3054802555*2K FR4054803285*2K FL3054802555*2K FL4054803285*2K FR3054802585*2K FR40548032100*2K FL3054802585*2K FL40548032100*2K FR30548025100*2K Max8000rpm FL30548025100*2K Max8000rpm page 100

Radial Tapping Forward Head (DIN5480) R4 DIN 5480 D DIN69880 X S MAX. r.p.m. VDI Tool Holder DIN 5480 i A B C F G M P DIN5480 TFR3054801655 30 1-10/ER16 30 3000 1:1 97 64 75 41 30 55 W16X0.8 $2,510.00 TFL3054801655 30 1-10/ER16 30 3000 1:1 97 64 75 41 30 55 W16X0.8 $2,510.00 TFR3054801685 30 1-10/ER16 30 3000 1:1 117 64 75 41 30 85 W16X0.8 $2,510.00 TFL3054801685 30 1-10/ER16 30 3000 1:1 117 64 75 41 30 85 W16X0.8 $2,510.00 TFR30548016100 30 1-10/ER16 30 3000 1:1 127 64 75 41 30 100 W16X0.8 $2,550.00 TFL30548016100 30 1-10/ER16 30 3000 1:1 127 64 75 41 30 100 W16X0.8 $2,550.00 TFR4054802065 40 1-13/ER20 35 3000 1:1 99 80 70 40 25 65 W20X0.8 $2,570.00 TFL4054802065 40 1-13/ER20 35 3000 1:1 99 80 70 40 25 65 W20X0.8 $2,570.00 TFR4054802085 40 1-13/ER20 35 3000 1:1 119 80 70 40 25 85 W20X0.8 $2,600.00 TFL4054802085 40 1-13/ER20 35 3000 1:1 119 80 70 40 25 85 W20X0.8 $2,600.00 TFR40548020100 40 1-13/ER20 35 3000 1:1 134 80 70 40 25 100 W20X0.8 $2,670.00 TFL40548020100 40 1-13/ER20 35 3000 1:1 134 80 70 40 25 100 W20X0.8 $2,670.00 Radial Drilling & Milling Head w/ Disk Cutter Unit SAUTER TYPE External coolant supply R20 Coupling to DIN5480 DIN 5480 D DIN69880 X MAX. r.p.m. i A B C E F G H K M P DIN5480 BR30548016C/3 30 29 3000 3:1 124 64 45 77.5 34 18 62 16 100 W16X0.8 $4,460.00 BL30548016C/3 30 29 3000 3:1 124 64 45 77.5 34 18 62 16 100 W16X0.8 $4,460.00 BR40548016C/3 40 30.5 3000 3:1 127 70 45 77.5 34 18 62 16 103 W20X0.8 $4,860.00 BL40548016C/3 40 30.5 3000 3:1 127 70 45 77.5 34 18 62 16 103 W20X0.8 $4,860.00 Radial Drilling & Milling Heads w/ Double Collets To be used for collet DIN 6499 External coolant supply Collet is not included R21 DIN 5480 Angular Head R22 (A20) D DIN69880 X S MAX. r.p.m. i A B C G M P DIN5480 DF3054802585D 30 1-16/ER25 42 4000 1:1 112 64 66 26.5 85 W16X0.8 $3,560.00 DF4054803285D 40 2-20/ER32 50 4000 1:1 119 80 82 28 85 W20X0.8 $3,900.00 DF40548032100D 40 2-20/ER32 50 4000 1:1 134 80 82 28 100 W20X0.8 $4,250.00 To be used for collet DIN 6499 External coolant supply Collet is not included DIN 5480 D DIN69880 X MAX. r.p.m. i A B C E F G M P DIN5480 DA30548020B 35 1-13/ER20 4000 1:1 ±90 64 59 54 32 27 67 W16X0.8 $5,600.00 DA40548025B 40 1-16/ER25 4000 1:1 ±90 76 65 65 38 29 70 W20X0.8 $6,500.00 page 101

VDI Tool Holder DIN 5482 Axial Driven Tools (DIN 5482) Coupling: 5482 Machine Type VDI dia Turret Mfg Coupling: 5482 Machine Type VDI dia Turret Mfg Colchester Storm II 120M, Tornado 120M 30 Sauter Magdeburger M400 50 Sauter Colchester Storm II 220M, Tornado 220M 40 Sauter Magdeburger M500 50 Sauter Doosan S 390LM 40 Sauter Monforts RNC 3, RNC 200, RNC 300 30 Sauter Emco ET 360 MC 30 Sauter Monforts RNC 4, RNC 5, RNC 400, RNC 500, RNC 600 40 Sauter Fortune VTurn 36CV, 46CV 50 Sauter Monforts RNC 7, RNC 700, RNC 1000 60 Sauter Gildemeister CTX 300, CTX 310 30 Sauter Niles N 10 30 Sauter Gildemeister CTX 400 S2, E 30 Sauter Niles N 10 40 Sauter Gildemeister CTX 500 S2, E 40 Sauter Niles N 20 40 Sauter Gildemeister CTX 600 S2, E 50 Sauter Niles N 20 50 Sauter Gital GT 500 40 Sauter Niles N 30 50 Sauter Graziano GT 300 30 Sauter Niles N 40, N50 60 Sauter Graziano GT 400, GT 500 40 Sauter Spinner TC 65-MC 30 Sauter Graziano GT 700 50 Sauter Traub TNA 300 30 Sauter Heyligenstaedt Heynumat 5 40 Sauter Traub TNA 400 40 Sauter Heyligenstaedt Heynumat 15 50 Sauter Victor VTurn 36CV, 46CV 50 Sauter Heyligenstaedt Heynumat 20, 21, 24, 25 60 Sauter Weiler DZ 45 30 Sauter Magdeburger M110 30 Sauter Weiler DZ 67 V1, V2 30 Sauter Magdeburger M120 40 Sauter WFL M30 40 Sauter Magdeburger M160U-2 40 Sauter WFL M40, M60 50 Sauter Magdeburger M300 40 Sauter Axial Drilling & Milling Head w/ Collet Chuck SAUTER TYPE Applications: For Endmilling, Drilling, Reaming For Clockwise and anti-clockwise rotation To be used for collet 6499 External coolant supply Collet is not included A2 Coupling to DIN5482 D X S MAX. i A B C E F P DIN 5482 DIN69880 r.p.m. DIN5482 With IC DA20548220 $960.00 DA30548225 30 1-16/ER25 42 6000 1:1 101 70 33 66 66 B15X12 $960.00 DA20548220K $1,300.00 DA40548232 40 2-20/ER32 50 6000 1:1 89 55 39 79 78 B17X14 $1,050.00 DA30548225K $1,500.00 DA50548240 50 3-26/ER40 63 6000 1:1 128 85 40 84 88 B20X17 $1,600.00 DA40548232K $1,650.00 DA60548250 60 10-34/ER50 78 6000 1:1 154 98 52 104 104 B25X22 $2,350.00 DA50548240K DA60548250K IC: Internal Coolant Axial Tapping Head w/ Collet Chuck A11 DIN 5482 D DIN69880 X S MAX. r.p.m. i A B C E F P DIN5482 TDA30548216 30 1-10/ER16 32 3000 1:1 115 70 33 66 66 B15X12 $1,364.00 TDA40548220 40 1-13/ER20 35 3000 1:1 120 55 39 79 78 B17X14 $1,450.00 TDA50548225 50 1-16/ER25 42 3000 1:1 133 85 40 84 88 B20X17 $1,950.00 TDA60548232 60 2-20/ER32 50 3000 1:1 147 98 52 104 104 B25X22 $2,650.00 Axial Cutting Head to DIN 6358 To be used for cutter arbor according to DIN 6358 Applications: For various cutters Delivered: Complete with intermediate rings and coolant pipe A8 DIN 5482 D DIN69880 X DIN6358 S MAX. r.p.m. i A B C G P DIN5482 DA30548216C 30 16 32 3000 1:1 91.5 70 68 27 B15X12 $1,495.00 DA40548216C 40 16 32 3000 1:1 68.5 55 68 27 B17X14 $1,730.00 DA40548222C 40 22 32 3000 1:1 68.5 55 86 31 B17X14 $1,730.00 DA50548222C 50 22 40 3000 1:1 117 85 96 31 B20X17 $2,305.00 DA50548227C 50 27 40 3000 1:1 117 85 96 33 B20X17 $2,480.00 page 102

VDI Tool Holder DIN 5482 Axial Drilling & Milling Head Offset w/ Collet Chuck To be used for cutter arbor according to DIN 6499 External coolant supply Collet is not included A17 DIN 5482 D DIN69880 X S MAX. r.p.m. i A B C P DIN5482 DA3054822529 30 1-16/ER25 42 4000 1:1 100 29 60 B15X12 $1,850.00 DA4054823250 40 2-20/ER32 50 4000 1:1 113 50 80 B17X14 $2,350.00 DA5054824065 50 3-26/ER40 63 3000 1:1 124 65 86 B20X17 $3,025.00 DA6054825065 60 10-34/ER50 78 3000 1:1 168 65 104 B25X22 $3,150.00 DA6054825080 60 10-34/ER50 78 3000 1:1 173.5 80 104 B25X22 $3,450.00 *** Double Speed With IC DA3054822529K DA4054823250K DA5054824065K IC: Internal Coolant Double Torque DA3054822529/2 DA4054823250/2 DA5054824065/2 Max 2000rpm Double Torque w/ic DA3054822529/2K DA4054823250/2K DA5054824065/2K Max2000rpm Double Speed DA3054822529*2 DA4054823250*2 DA5054824065*2 Max 8000rpm Double Speed w/ IC DA3054822529*2K DA4054823250*2K DA5054824065*2K Max8000rpm Radial Driven Tools (DIN 5482) Radial Drilling & Milling Backward Head Applications: For Endmilling, Drilling, Reaming. To be used for collet DIN 6499 For clockwiseand counter-clockwise rotation. External coolant supply Collet is not included R9 DIN 5482 D DIN69880 X S MAX. r.p.m. i A B C E F G M P DIN5482 BR3054822569 30 1-16/ER25 42 5000 1:1 95 60 42 75.5 31.5 28.5 69 B15X12 $2,400.00 BL3054822569 30 1-16/ER25 42 5000 1:1 95 60 42 75.5 31.5 28.5 69 B15X12 $2,400.00 BR4054823290 40 2-20/ER32 50 5000 1:1 124 80 44 110 42 34 90 B17X14 $2,550.00 BL4054823290 40 2-20/ER32 50 5000 1:1 124 80 44 110 42 34 90 B17X14 $2,550.00 BR5054824090 50 3-26/ER40 63 5000 1:1 129 86 49 112 45 39 90 B20X17 $2,950.00 BL5054824090 50 3-26/ER40 63 5000 1:1 129 86 49 112 45 39 90 B20X17 $2,950.00 BR60548250102 60 10-34/ER50 78 5000 1:1 147 104 83 118 54 42 102 B25X22 $4,350.00 BL60548250102 60 10-34/ER50 78 5000 1:1 147 104 83 118 54 42 102 B25X22 $4,350.00 With IC Double Torque Double Torque w/ic BR3054822569K $3,100.00 BR3054822569/2 BR3054822569/2K BL3054822569K $3,100.00 BL3054822569/2 BL3054822569/2K BR4054823290K $3,280.00 BR4054823290/2 BR4054823290/2K BL4054823290K $3,280.00 BL4054823290/2 BL4054823290/2K BR5054824090K BR5054824090/2 BR5054824090/2K BL5054824090K BL5054824090/2 BL5054824090/2K BR60548250102K BR60548250102/2 BR60548250102/2K BL60548250102K IC: Internal Coolant BL60548250102/2 Max 2000rpm BL60548250102/2K Max2000rpm page 103

VDI Tool Holder DIN 5482 Radial Driven Tools (DIN 5482) Radial Tapping Backward Head R2 DIN 5482 D DIN69880 X S MAX. r.p.m. i A B C E F G M P DIN5482 TBR3054821669 30 1-10/ER16 32 3000 1:1 95 60 44 75.5 31.5 32 69 B15X12 $2,810.00 TBL3054821669 30 1-10/ER16 32 3000 1:1 95 60 44 75.5 31.5 32 69 B15X12 $2,810.00 TBR4054822090 40 1-13/ER20 35 3000 1:1 124 80 50 110 42 34 90 B17X14 $3,150.00 TBL4054822090 40 1-13/ER20 35 3000 1:1 124 80 50 110 42 34 90 B17X14 $3,150.00 TBR5054822590 50 1-16/ER25 42 3000 1:1 129 86 54 112 45 36 90 B20X17 $3,940.00 TBL5054822590 50 1-16/ER25 42 3000 1:1 129 86 54 112 45 36 90 B20X17 $3,940.00 TBR60548232102 60 2-20/ER32 50 3000 1:1 147 104 87 118 54 40 102 B25X22 $4,650.00 TBL60548232102 60 2-20/ER32 50 3000 1:1 147 104 87 118 54 40 102 B25X22 $4,650.00 Radial Drilling & Milling Forward Head Applications: For Endmilling, Drilling, Reaming. To be used for collet DIN 6499 For clockwiseand counter-clockwise rotation. External coolant supply Collet is not included R13 DIN 5482 D DIN69880 X S MAX. r.p.m. i A B C F G M P DIN5482 FR3054822565 30 1-16/ER25 42 5000 1:1 97 64 74.5 41 26 65 B15X12 $1,390.00 FL3054822565 30 1-16/ER25 42 5000 1:1 97 64 74.5 41 26 65 B15X12 $1,390.00 FR3054822585 30 1-16/ER25 42 5000 1:1 117 64 74.5 41 26 85 B15X12 $1,490.00 FL3054822585 30 1-16/ER25 42 5000 1:1 117 64 74.5 41 26 85 B15X12 $1,490.00 FR4054823265 40 2-20/ER32 50 5000 1:1 99 80 71 40 23 65 B20X17 $1,850.00 FL4054823265 40 2-20/ER32 50 5000 1:1 99 80 71 40 23 65 B20X17 $1,850.00 FR4054823285 40 2-20/ER32 50 5000 1:1 119 80 71 40 23 85 B20X17 $1,850.00 FL4054823285 40 2-20/ER32 50 5000 1:1 119 80 71 40 23 85 B20X17 $1,850.00 FR5054824075 50 3-26/RT40 63 5000 1:1 115 88 103 56 40 75 B25X22 $3,030.00 FL5054824075 50 3-26/RT40 63 5000 1:1 115 88 103 56 40 75 B25X22 $3,030.00 With IC Double Torque Double Torque w/ic Double Speed Double Speed w/ IC FR3054822565K FR3054822565/2 FR3054822565/2K FR3054822565*2 FR3054822565*2K FL3054822565K FL3054822565/2 FL3054822565/2K FL3054822565*2 FL3054822565*2K FR3054822585K FR3054822585/2 FR3054822585/2K FR3054822585*2 FR3054822585*2K FL3054822585K FL3054822585/2 FL3054822585/2K FL3054822585*2 FL3054822585*2K FR4054823265K $2,100.00 FR4054823265/2 FR4054823265/2K FR4054823265*2 FR4054823265*2K FL4054823265K $2,100.00 FL4054823265/2 FL4054823265/2K FL4054823265*2 FL4054823265*2K FR4054823285K $2,550.00 FR4054823285/2 FR4054823285/2K FR4054823285*2 FR4054823285*2K FL4054823285K $2,550.00 FL4054823285/2 FL4054823285/2K FL4054823285*2 FL4054823285*2K FR5054824075K FR5054824075/2 FR5054824075/2K FR5054824075*2 FR5054824075*2K FL5054824075K IC: Internal Coolant FL5054824075/2 Max 2500rpm FL5054824075/2K Max2500rpm FL5054824075*2 Max 8000rpm FL5054824075*2K Max8000rpm page 104

VDI Tool Holder DIN 5482 Radial Tapping Forward Head R5 DIN 5482 D DIN69880 X S MAX. r.p.m. i A B C F G M P DIN5482 TFR3054821665 30 1-10/ER16 32 3000 1:1 97 64 75 41 30 65 B15X12 $2,070.00 TFL3054821665 30 1-10/ER16 32 3000 1:1 97 64 75 41 30 65 B15X12 $2,070.00 TFR3054821685 30 1-10/ER16 32 3000 1:1 117 64 75 41 30 85 B15X12 $2,070.00 TFL3054821685 30 1-10/ER16 32 3000 1:1 117 64 75 41 30 85 B15X12 $2,070.00 TFR4054822065 40 1-13/ER20 35 3000 1:1 99 80 70 40 25 65 B20X17 $2,130.00 TFL4054822065 40 1-13/ER20 35 3000 1:1 99 80 70 40 25 65 B20X17 $2,130.00 TFR4054822085 40 1-13/ER20 35 3000 1:1 119 80 70 40 25 85 B20X17 $2,160.00 TFL4054822085 40 1-13/ER20 35 3000 1:1 119 80 70 40 25 85 B20X17 $2,160.00 TFR5054822575 50 1-16/ER25 42 3000 1:1 115 88 103 56 42 75 B25X22 $3,160.00 TFL5054822575 50 1-16/ER25 42 3000 1:1 115 88 103 56 42 75 B25X22 $3,160.00 Radial Driven Tools (DIN 5482) Radial Drilling & Milling Head w/ Disk Cutter Unit SAUTER TYPE External coolant supply R23 Coupling to DIN5482 DIN 5482 D DIN69880 X MAX. r.p.m. i A B C E F G H K M P DIN5482 BR30548216C*3 30 29 3000 3:1 124 64 45 77.5 34 18 62 16 100 B15X12 $4,350.00 BL30548216C*3 30 29 3000 3:1 124 64 45 77.5 34 18 62 16 100 B15X12 $4,350.00 BR40548216C*3 40 30.5 3000 3:1 127 70 45 77.5 34 18 62 16 103 B17X14 $4,650.00 BL40548216C*3 40 30.5 3000 3:1 127 70 45 77.5 34 18 62 16 103 B17X14 $4,650.00 Angular Head To be used for collet DIN 6499 External coolant supply Collet is not included R24 (A21) DIN 5482 D DIN69880 X MAX. r.p.m. i A B C E F G M P DIN5482 DA30548220B 30 1-13/ER20 4000 1:1 ±90 64 59 54 32 27 67 B15X12 $5,700.00 DA40548225B 40 1-16/ER25 4000 1:1 ±90 76 65 65 38 29 70 B17X14 $6,000.00 page 105

VDI Tool Holder DIN 1809 Axial Driven Tools (DIN 1809) Coupling: 1809 Machine Type VDI dia Turret Mfg Machine Type VDI dia Turret Mfg Cincinnati Hawk TC-150M 30 Duplomatic Emco ET 900 MC 60 Duplomatic Cincinnati Hawk TC-200M, TC-250M 40 Duplomatic Femco HL-25 (12 tools) 30 Duplomatic Daewoo Puma 200M 30 Duplomatic** Focus FCL-300MC (SMH-DT-20-340/0-12-P/23) 40 Duplomatic Daewoo Puma 250M 40 Duplomatic** Fortune VTurn 16CV, 20CV, VTurn II 20YBCV 30 Duplomatic Daewoo Puma 350M 50 Duplomatic** Fortune VTurn 26CV, Vturn II 26CV 40 Duplomatic Emag VSC 160, VSC 200, VSC 250, VL2, VL3, VL5 40 Emag Hyundai HiT-160M 30 Duplomatic Emag VSC 315, VSC 400, VSC 500 50 Emag Hyundai HiT-200M, 250M 40 Duplomatic Emco ET 342 MC 20 Duplomatic Leadwell T-8M (12 tools) 40 Emco ET 345 II, ET 400 MC 30 Duplomatic Tornos 80-CCN R-TM, 180-CCN R-TM 30 Duplomatic Emco ET 500 MC 40 Duplomatic Victor VTurn 16CV, 20CV 30 Duplomatic Emco ET 700 MC, ET 800 MC 50 Duplomatic Victor VTurn 26CV 40 Duplomatic Axial Drilling & Milling Head w/ Collet Chuck Applications: For Endmilling, Drilling, Reaming For Clockwise and anti-clockwise rotation To be used for collet 6499 External coolant supply Collet is not included A3 DIN 1809 D DIN69880 *With IC DA20180916K DA30180925K $1,350.00 DA40180932K $1,490.00 DA50180940K DA60180950K **IC: Internal Coolant X S MAX. r.p.m. i A B C DA20180916 20 1-10/ER16 32 6000 1:1 76 48 25 $920.00 DA30180925 30 1-16/ER25 42 6000 1:1 101 70 33 $950.00 DA40180932 40 2-20/ER32 50 6000 1:1 89 55 39 $1,050.00 DA50180940 50 3-26/ER40 63 6000 1:1 128 85 40 $1,650.00 DA60180950 60 10-34/ER50 78 6000 1:1 154 98 52 $2,250.00 DUPLOMATIC TYPE Coupling to DIN1809 Axial Tapping Head w/ Collet Chuck A12 DIN 1809 D DIN69880 X S MAX. r.p.m. i A B C TDA30180916 30 1-10/ER16 32 3000 1:1 115 70 33 $1,360.00 TDA40180920 40 1-13/ER20 35 3000 1:1 120 55 39 $1,500.00 TDA50180925 50 1-16/ER25 42 3000 1:1 133 85 40 $2,000.00 TDA60180932 60 2-20/ER32 50 3000 1:1 147 98 52 $2,480.00 Axial Cutting Head to DIN 6358 To be used for cutter arbor according to DIN 6358 Applications: For various cutters Delivered: Complete with intermediate rings and coolant pipe A14 DIN 1809 D DIN69880 X DIN6358 S MAX. r.p.m. i A B C G DA30180916C 30 16 32 3000 1:1 91.5 70 68 27 $1,500.00 DA40180916C 40 16 32 3000 1:1 68.5 55 86 27 $1,730.00 DA40180922C 40 22 32 3000 1:1 68.5 55 86 31 $1,840.00 DA50180922C 50 22 40 3000 1:1 117 85 96 31 $2,300.00 DA50180927C 50 27 40 3000 1:1 117 85 96 33 $2,400.00 page 106

VDI Tool Holder DIN 1809 Radial Driven Tools (DIN 1809) Axial Drilling & Milling Head Offset w/ Collet Chuck To be used for cutter arbor according to DIN 6499 External coolant supply Collet is not included D DIN69880 A18 DIN 1809 X S MAX. r.p.m. i A B C DA2018091629 20 1-10/ER16 32 4000 1:1 93.5 29 50 $1,670.00 DA3018092529 30 1-16/ER25 42 4000 1:1 100 29 60 $1,850.00 DA4018093250 40 2-20/ER32 50 4000 1:1 113 50 80 $2,180.00 DA5018094065 50 3-26/ER40 63 3000 1:1 124 65 80 $2,600.00 DA6018095065 60 10-34/ER50 73 3000 1:1 168 65 104 $2,850.00 DA6018095080 60 10-34/ER50 73 3000 1:1 173.5 80 104 $2,950.00 With IC Double Torque Double Torque w/ic Double Speed Double Speed w/ IC DA2018091629K DA2018091629/2 DA2018091629/2K DA2018091629*2 DA2018091629*2K DA3018092529K DA3018092529/2 DA3018092529/2K DA3018092529*2 DA3018092529*2K DA4018093250K DA4018093250/2 DA4018093250/2K DA4018093250*2 DA4018093250*2K DA5018094065K IC: Internal Coolant DA5018094065/2 Max 2000rpm DA5018094065/2K Max2000rpm DA5018094065*2 Max 8000rpm DA5018094065*2K Max8000rpm Radial Drilling & Milling Backward Head Applications: For Endmilling, Drilling, Reaming. To be used for collet DIN 6499 For clockwiseand counter-clockwise rotation. External coolant supply Collet is not included R10 DIN 1809 D DIN69880 X S MAX. r.p.m. page 107 i A B C E F G M BR2018091660 20 1-10/ER16 32 5000 1:1 83 50 35 70 27 27 60 $2,100.00 BL2018091660 20 1-10/ER16 32 5000 1:1 83 50 35 62.5 27 27 60 $2,100.00 BR3018092569 30 1-16/ER25 42 5000 1:1 95 60 41.5 75.5 31.5 29 69 $2,300.00 BL3018092569 30 1-16/ER25 42 5000 1:1 95 60 41.5 75.5 31.5 29 69 $2,300.00 BR4018093290 40 2-20/ER32 50 5000 1:1 124 80 44 110 42 34 90 $2,500.00 BL4018093290 40 2-20/ER32 50 5000 1:1 124 80 44 110 42 34 90 $2,500.00 BR5018094090 50 3-26/ER40 62 5000 1:1 129 86 49 112 45 39 90 $3,1500.00 BL5018094090 50 3-26/ER40 62 5000 1:1 129 86 49 112 45 39 90 $3,1500.00 BR60180950102 60 10-34/ER50 78 5000 1:1 147 104 83 118 54 42 102 $4,350.00 BL60180950102 60 10-34/ER50 78 5000 1:1 147 104 83 118 54 42 102 $4,350.00 With IC Double Torque Double Torque w/ic BR2018091657K BR2018091657/2 BR2018091657/2K BL2018091657K BL2018091657/2 BL2018091657/2K BR3018092569K $2,900.00 BR3018092569/2 BR3018092569/2K BL3018092569K $2,900.00 BL3018092569/2 BL3018092569/2K BR4018093290K $3,100.00 BR4018093290/2 BR4018093290/2K BL4018093290K $3,100.00 BL4018093290/2 BL4018093290/2K BR5018094090K BR5018094090/2 BR5018094090/2K BL5018094090K BL5018094090/2 BL5018094090/2K BR60180950102K BR60180950102/2 BR60180950102/2K BL60180950102K BL60180950102/2 BL60180950102/2K IC: Internal Coolant Max 2000rpm Max2000rpm

VDI Tool Holder DIN 1809 Radial Driven Tools (DIN 1809) R3 DIN 1809 D DIN69880 X Radial Tapping Backward Head S MAX. r.p.m. i A B C E F G M TBR3018091669 30 1-10/ER16 32 3000 1:1 95 60 44 75.5 31.5 32 69 $2,810.00 TBL3018091669 30 1-10/ER16 32 3000 1:1 95 60 44 75.5 31.5 32 69 $2,810.00 TBR4018092090 40 1-13/ER20 35 3000 1:1 124 80 50 110 42 34 90 $3,150.00 TBL4018092090 40 1-13/ER20 35 3000 1:1 124 80 50 110 42 34 90 $3,150.00 TBR5018092590 50 1-16/ER25 42 3000 1:1 129 86 54 112 45 36 90 $3,560.00 TBL5018092590 50 1-16/ER25 42 3000 1:1 129 86 54 112 45 36 90 $3,560.00 TBR60180932102 60 2-20/ER32 50 3000 1:1 147 104 87 118 54 40 102 $4,350.00 TBL60180932102 60 2-20/ER32 50 3000 1:1 147 104 87 118 54 40 102 $4,350.00 Radial Drilling & Milling Forward Head Applications: For Endmilling, Drilling, Reaming. To be used for collet DIN 6499 For clockwiseand counter-clockwise rotation. External coolant supply Collet is not included R14 DIN 1809 D DIN69880 X S MAX. r.p.m. i A B C F G M FR2018091645 20 1-10/ER16 30 5000 1:1 67 50 63 27 24.5 45 $1,350.00 FL2018091645 20 1-10/ER16 30 5000 1:1 67 50 63 27 24.5 45 $1,350.00 FR3018092555 30 1-16/ER25 42 5000 1:1 87 64 74.5 41 26 55 $1,650.00 FL3018092555 30 1-16/ER25 42 5000 1:1 87 64 74.5 41 26 55 $1,650.00 FR4018093265 40 2-20/ER32 50 5000 1:1 99 80 71 40 23 65 $1,800.00 FL4018093265 40 2-20/ER32 50 5000 1:1 99 80 71 40 23 65 $1,800.00 FR40180932100 40 2-20/ER32 50 5000 1:1 99 80 71 40 23 100 $1,950.00 FL40180932100 40 2-20/ER32 50 5000 1:1 99 80 71 40 23 100 $1,950.00 FR5018094075 50 3-26/RT40 63 5000 1:1 115 88 103 56 40 75 $2,800.00 FL5018094075 50 3-26/RT40 63 5000 1:1 115 88 103 56 40 75 $2,800.00 With IC Double Torque Double Torque w/ic Double Speed Double Speed w/ IC FR3018092555K $2,050.00 FR3018092555/2 FR3018092555/2K FR3018092555*2 FR3018092555*2K FL3018092555K $2,050.00 FL3018092555/2 FL3018092555/2K FL3018092555*2 FL3018092555*2K FR4018093265K $2,300.00 FR4018093265/2 FR4018093265/2K FR4018093265*2 FR4018093265*2K FL4018093265K $2,300.00 FL4018093265/2 FL4018093265/2K FL4018093265*2 FL4018093265*2K FR5018094075K FR5018094075/2 FR5018094075/2K FR5018094075*2 FR5018094075*2K FL5018094075K IC: Internal Coolant FL5018094075/2 Max 2500rpm FL5018094075/2K Max2500rpm FL5018094075*2 Max 8000rpm FL5018094075*2K Max 8000rpm Radial Tapping Forward Head R6 D X S MAX. i A B C F G M DIN69880 r.p.m. TFR3018091655 30 1-10/ER16 32 3000 1:1 87 64 75 41 30 55 $2,070.00 DIN 1809 TFL3018091655 30 1-10/ER16 32 3000 1:1 87 64 75 41 30 55 $2,070.00 TFR4018092065 40 1-13/ER20 35 3000 1:1 99 80 70 40 25 65 $2,150.00 TFL4018092065 40 1-13/ER20 35 3000 1:1 99 80 70 40 25 65 $2,150.00 TFR5018092575 50 1-16/ER25 42 3000 1:1 115 88 103 56 42 75 $3,160.00 TFL5018092575 50 1-16/ER25 42 3000 1:1 115 88 103 56 42 75 $3,160.00 *** Unit: mm ***Double Torque, Double Speed and Internal Coolant are also available. page 108

VDI Tool Holder Spur Coupling IT Radial Drilling & Milling Head w/ Disk Cutter Unit External coolant supply R25 (A25) DUPLOMATIC TYPE DIN 1809 D DIN69880 X (mm) MAX. r.p.m. Coupling to DIN1809 i A B C E F G H K M BR30180916C*3 30 29 3000 3:1 124 64 45 77.5 34 18 62 16 100 $3,840.00 BL30180916C*3 30 29 3000 3:1 124 64 45 77.5 34 18 62 16 100 $3,840.00 BR40180916C*3 40 30.5 3000 3:1 124 64 45 77.5 34 18 62 16 100 $4,350.00 BL40180916C*3 40 30.5 3000 3:1 124 64 45 77.5 34 18 62 16 100 $4,350.00 Angular Head R26 (A22) To be used for collet DIN 6499 External coolant supply Collet is not included DIN 1809 D DIN69880 X MAX. r.p.m. S i A B C E F G M DA30180920B 30 1-13/ER20 4000 35 1:1 ±90 64 58.5 53.5 32 27 67 $5,950.00 DA40180925B 40 1-16/ER25 4000 42 1:1 ±90 76 65 65 38 29 70 $6,300.00 Axial Driven Tools (Spur Coupling IT) DUPLOMATIC Turret Coupling: IT Machine Type VDI dia Turret Mfg Matech MT-52S (12 tools) 30 Duplomatic Matech MT-52SM (12 tools) 30 Duplomatic Matech MT-75S (SM-P-20-PA-12/20) 40 Duplomatic Poly Gim Diamond 42 30 Duplomatic Axial Drilling & Milling Head w/ Collet Chuck Spur Coupling (IT) DUPLOMATIC TYPE Applications: For Endmilling, Drilling, Reaming For Clockwise and anti-clockwise rotation To be used for collet 6499 External coolant supply Collet is not included A4 IT Spur Coupling With IC DA30IT25K $2005.00 DA40IT32K $2160.00 DA50IT40K $2560.00 IC: Internal Coolant D DIN69880 X S MAX. r.p.m. i A B C DA30IT25 30 1-16/ER25 42 6000 1:1 86 55 68 $1,250.00 DA40IT32 40 2-20/ER32 50 6000 1:1 89 55 86 $1,350.00 DA50IT40 50 3-26/ER40 63 6000 1:1 118 81.5 96 $1,750.00 Axial Tapping Head w/ Collet Chuck A13 IT Spur Coupling D DIN69880 X S page 109 MAX. r.p.m. i A B C E F TDA30IT16 30 1-10/ER16 32 3000 1:1 109 55 33 66 66 $1,440.00 TDA40IT20 40 1-13/ER20 35 3000 1:1 120 55 39 79 78 $1,610.00 TDA50IT25 50 1-16/ER25 42 3000 1:1 136 81.5 40 84 88 $1,920.00

VDI Tool Holder Spur Coupling IT Axial Cutting Head to DIN 6358 To be used for cutter arbor according to DIN 6358 Applications: For various cutters Delivered: Complete with intermediate rings and coolant pipe A23 IT Spur Coupling D DIN69880 X DIN6358 S MAX. r.p.m. i A B C G DA30IT16C 30 16 32 3000 1:1 71 55 33 27 $1,500.00 DA40IT16C 40 16 32 3000 1:1 68.5 55 39 27 $1,730.00 DA40IT22C 40 22 32 3000 1:1 68.5 55 39 31 $1,840.00 DA50IT22C 50 22 40 3000 1:1 95.5 81.5 40 31 $2,300.00 DA50IT27C 50 27 40 3000 1:1 95.5 81.5 40 33 $2,410.00 Angular Head R27 (A24) To be used for collet DIN 6499 External coolant supply Collet is not included IT Spur Coupling D DIN69880 X MAX. r.p.m. S i A B C E F G M DA30IT20B 30 1-13/ER20 4000 35 1:1 ±90 64 59 54 32 27 67 $5,400.00 DA40IT25B 40 1-16/ER25 4000 42 1:1 ±90 76 65 65 38 29 70 $6,000.00 Radial Drilling & Milling Forward Head Applications: For Endmilling, Drilling, Reaming. To be used for collet DIN 6499 For clockwiseand counter-clockwise rotation. External coolant supply Collet is not included R15 IT Spur Coupling D DIN69880 X S MAX. r.p.m. i A B C F G M FR30IT2565 30 1-16/ER25 42 5000 1:1 97 64 74.5 41 26 65 $1,870.00 FL30IT2565 30 1-16/ER25 42 5000 1:1 97 64 74.5 41 26 65 $1,870.00 FR30IT2585 30 1-16/ER25 42 5000 1:1 117 64 74.5 41 26 85 $1,870.00 FL30IT2585 30 1-16/ER25 42 5000 1:1 117 64 74.5 41 26 85 $1,870.00 FR40IT3265 40 2-20/ER32 50 5000 1:1 99 80 71 40 23 65 $2,150.00 FL40IT3265 40 2-20/ER32 50 5000 1:1 99 80 71 40 23 65 $2,150.00 FR40IT3285 40 2-20/ER32 50 5000 1:1 119 80 71 40 23 85 $2,200.00 FL40IT3285 40 2-20/ER32 50 5000 1:1 119 80 71 40 23 85 $2,200.00 FR40IT32100 40 2-20/ER32 50 5000 1:1 134 80 71 40 23 100 $2,250.00 FL40IT32100 40 2-20/ER32 50 5000 1:1 134 80 71 40 23 100 $2,250.00 FR50IT4075 50 3-26/RT40 63 5000 1:1 115 88 103 56 40 75 $2,750.00 FL50IT4075 50 3-26/RT40 63 5000 1:1 115 88 103 56 40 75 $2,750.00 page 110

Radial Driven Tools Spur Coupling IT DUPLOMATIC Turret VDI Tool Holder Spur Coupling IT With IC Double Torque Double Torque w/ic Double Speed Double Speed w/ IC FR30IT2565K FR30IT2565/2 FR30IT2565/2K FR30IT2565*2 FR30IT2565*2K FL30IT2565K FL30IT2565/2 FL30IT2565/2K FL30IT2565*2 FL30IT2565*2K FR30IT2585K FR30IT2585/2 FR30IT2585/2K FR30IT2585*2 FR30IT2585*2K FL30IT2585K FL30IT2585/2 FL30IT2585/2K FL30IT2585*2 FL30IT2585*2K FR40IT3265K FR40IT3265/2 FR40IT3265/2K FR40IT3265*2 FR40IT3265*2K FL40IT3265K FL40IT3265/2 FL40IT3265/2K FL40IT3265*2 FL40IT3265*2K FR40IT3285K FR40IT3285/2 FR40IT3285/2K FR40IT3285*2 FR40IT3285*2K FL40IT3285K FL40IT3285/2 FL40IT3285/2K FL40IT3285*2 FL40IT3285*2K FR40IT32100K FR40IT32100/2 FR40IT32100/2K FR40IT32100*2 FR40IT32100*2K FL40IT32100K FL40IT32100/2 FL40IT32100/2K FL40IT32100*2 FL40IT32100*2K FR50IT4075K FR50IT4075/2 FR50IT4075/2K FR50IT4075*2 FR50IT4075*2K FL50IT4075K IC: Internal Coolant FL50IT4075/2 Max 15000rpm FL50IT4075/2K Max15000rpm FL50IT4075*2 Max 6000rpm FL50IT4075*2K Max6000rpm Radial Tapping Forward Head R7 IT Spur Coupling D DIN69880 X S MAX. r.p.m. i A B C F G M TFR30IT1665 30 1-10/ER16 30 3000 1:1 97 64 75 41 30 65 $2,230.00 TFL30IT1665 30 1-10/ER16 30 3000 1:1 97 64 75 41 30 65 $2,230.00 TFR30IT1685 30 1-10/ER16 30 3000 1:1 117 64 75 41 30 85 $2,230.00 TFL30IT1685 30 1-10/ER16 30 3000 1:1 117 64 75 41 30 85 $2,230.00 TFR40IT2065 40 1-13/ER20 35 3000 1:1 99 80 70 40 25 65 $2,290.00 TFL40IT2065 40 1-13/ER20 35 3000 1:1 99 80 70 40 25 65 $2,290.00 TFR40IT2085 40 1-13/ER20 35 3000 1:1 119 80 70 40 25 85 $2,300.00 TFL40IT2085 40 1-13/ER20 35 3000 1:1 119 80 70 40 25 85 $2,300.00 TFR50IT2575 50 1-16/ER25 42 3000 1:1 115 88 103 56 42 75 $3,100.00 TFL50IT2575 50 1-16/ER25 42 3000 1:1 115 88 103 56 42 75 $3,100.00 Radial Drilling & Milling Heads w/ Double Collets To be used for collet DIN 6499 External coolant supply Collet is not included R28 IT Spur Coupling D DIN69880 X S MAX. r.p.m. i A B C G M DF30IT2585D 30 1-16/ER25 42 4000 1:1 112 64 66 26.5 85 $3,470.00 DF40IT3285D 40 2-20/ER32 50 4000 1:1 119 80 82 28 85 $3,800.00 DF40IT32100D 40 2-20/ER32 50 4000 1:1 134 80 82 28 100 $4,020.00 page 111

VDI Tool Holder Spur Coupling MT Axial Driven Tools Spur Coupling MT Brauffaldi Turret Coupling: MT Machine Type VDI dia Turret Mfg Femco HL-25 30 Baruffaldi Spinner TC 46-MC 30 Baruffaldi Spinner TC 67L-MC 30 Baruffaldi Traub TND 200 30 Baruffaldi Coupling: MT Machine Type VDI dia Turret Mfg Femco HL-35, HL-45 40 Baruffaldi Spinner TC 67H-MC 40 Baruffaldi Spinner TC 82-MC, TC 108-MC 50 Baruffaldi Axial Drilling & Milling Head w/ Collet Chuck Applications: For Endmilling, Drilling, Reaming For Clockwise and anti-clockwise rotation To be used for collet 6499 External coolant supply Collet is not included A25 Spur Coupling (MT) BARUFFALDI TYPE MT Spur Coupling With IC DA20MT20K DA30MT25K DA40MT32K DA50MT40K IC: Internal Coolant D DIN69880 X S MAX. r.p.m. i A B C DA20MT16 20 1-10/ER16 30 6000 1:1 76 48 58 $1,250.00 DA30MT25 30 1-16/ER25 42 6000 1:1 86 55 68 $1,350.00 DA40MT32 40 2-20/ER32 50 6000 1:1 89 55 86 $1,490.00 DA50MT40 50 3-26/ER40 63 6000 1:1 123 81.5 96 $1,900.00 DA60MT50 60 10-34/ER50 78 6000 1:1 140 88.5 116 $2,970.00 Axial Tapping Head w/ Collet Chuck A26 MT Spur Coupling D DIN69880 X S MAX. r.p.m. i A B C TDA30MT16 30 1-10/ER16 30 3000 1:1 85 55 68 $1,550.00 TDA40MT20 40 1-13/ER20 35 3000 1:1 102 55 86 $1,750.00 TDA50MT25 50 1-16/ER25 42 3000 1:1 122 81.5 96 $2,070.00 Axial Cutting Head to DIN 6358 To be used for cutter arbor according to DIN 6358 Applications: For various cutters Delivered: Complete with intermediate rings and coolant pipe A15 MT Spur Coupling D DIN69880 X DIN6358 S MAX. r.p.m. i A B C G DA30MT16C 30 16 32 3000 1:1 91.5 55 68 27 $1,700.00 DA40MT16C 40 16 32 3000 1:1 68.5 55 68 27 $1,950.00 DA40MT22C 40 22 32 3000 1:1 68.5 55 86 31 $2,090.00 DA50MT22C 50 22 40 3000 1:1 117 81.5 96 31 $2,590.00 DA50MT27C 50 27 40 3000 1:1 117 81.5 96 33 $2,700.00 page 112

Radial Driven Tools Spur Coupling MT Brauffaldi Turret VDI Tool Holder Spur Coupling MT Axial Drilling & Milling Head Offset w/ Collet Chuck To be used for cutter arbor according to DIN 6499 External coolant supply Collet is not included A27 MT Spur Coupling With IC DA20MT1629K DA30MT2529K DA40MT3250K DA50MT4065K DA60MT5065K DA60MT5080K IC: Internal Coolant D DIN69880 X S MAX. r.p.m. i A B C DA20MT1629 20 1-10/ER16 30 4000 1:1 93.5 29 50 $1,850.00 DA30MT2529 30 1-16/ER25 42 4000 1:1 100 29 60 $2,550.00 DA40MT3250 40 2-20/ER32 50 4000 1:1 113 50 80 $2,760.00 DA50MT4065 50 3-26/ER40 63 3000 1:1 124 65 86 $3,200.00 DA60MT5065 60 10-34/ER40 78 3000 1:1 168 65 104 $3,450.00 DA60MT5080 60 10-34/ER40 78 3000 1:1 173.5 80 104 $3,660.00 *** Double Speed Radial Drilling & Milling Backward Head Applications: For Endmilling, Drilling, Reaming. To be used for collet DIN 6499 For clockwiseand counter-clockwise rotation. External coolant supply Collet is not included R18 MT Spur Coupling D DIN69880 X S MAX. r.p.m. i A B C E F G M BR20MT1660 20 1-10/ER16 30 5000 1:1 83 50 35 70 27 27 60 $2,450.00 BL20MT1660 20 1-10/ER16 30 5000 1:1 83 50 35 70 27 27 60 $2,450.00 BR30MT2569 30 1-16/ER25 42 5000 1:1 95 60 42 76 32 29 69 $2,650.00 BL30MT2569 30 1-16/ER25 42 5000 1:1 95 60 42 76 32 29 69 $2,650.00 BR40MT3290 40 2-20/ER32 50 5000 1:1 124 80 44 110 42 34 90 $2,900.00 BL40MT3290 40 2-20/ER32 50 5000 1:1 124 80 44 110 42 34 90 $2,900.00 BR50MT4090 50 3-26/ER40 63 5000 1:1 129 86 49 112 45 39 90 $3,300.00 BL50MT4090 50 3-26/ER40 63 5000 1:1 129 86 49 112 45 39 90 $3,300.00 BR60MT50102 60 10-34/ER50 78 5000 1:1 147 104 83 118 54 50 102 $4,500.00 BL60MT50102 60 10-34/ER50 78 5000 1:1 147 104 83 118 54 50 102 $4,500.00 With IC Double Torque Double Torque w/ic BR20MT1660K BR20MT1660/2 BR20MT1660/2K BL20MT1660K BL20MT1660/2 BL20MT1660/2K BR30MT2569K BR30MT2569/2 BR30MT2569/2K BL30MT2569K BL30MT2569/2 BL30MT2569/2K BR40MT3290K BR40MT3290/2 BR40MT3290/2K BL40MT3290K BL40MT3290/2 BL40MT3290/2K BR50MT4090K BR50MT4090/2 BR50MT4090/2K BL50MT4090K BL50MT4090/2 BL50MT4090/2K BR60MT50102K BR60MT50102/2 BR60MT50102/2K BL60MT50102K IC: Internal Coolant BL60MT50102/2 Max 2500rpm BL60MT50102/2K Max2500rpm page 113

VDI Tool Holder Spur Coupling MT Radial Tapping Backward Head R16 MT Spur Coupling D DIN69880 X S MAX. r.p.m. i A B C E F G M TBR30MT1669 30 1-10/ER16 32 3000 1:1 95 60 44 76 32 32 69 $2,960.00 TBL30MT1669 30 1-10/ER16 32 3000 1:1 95 60 44 76 32 32 69 $2,960.00 TBR40MT2090 40 1-13/ER20 35 3000 1:1 124 80 50 110 42 34 90 $3,290.00 TBL40MT2090 40 1-13/ER20 35 3000 1:1 124 80 50 110 42 34 90 $3,290.00 TBR50MT2590 50 2-16/ER25 42 3000 1:1 129 86 54 112 45 36 90 $3,610.00 TBL50MT2590 50 2-16/ER25 42 3000 1:1 129 86 54 112 45 36 90 $3,610.00 TBR60MT32102 60 2-20/ER32 50 3000 1:1 147 104 83 118 54 56 102 $4,350.00 TBL60MT32102 60 2-20/ER32 50 3000 1:1 147 104 83 118 54 56 102 $4,350.00 Radial Drilling & Milling Forward Head Applications: For Endmilling, Drilling, Reaming. To be used for collet DIN 6499 For clockwiseand counter-clockwise rotation. External coolant supply Collet is not included R19 MT Spur Coupling D DIN69880 X S MAX. r.p.m. i A B C F G M FR20MT2045 20 1-10/ER16 30 5000 1:1 67 50 63 27 24.5 45 $1,650.00 FL20MT2045 20 1-10/ER16 30 5000 1:1 67 50 63 27 24.5 45 $1,650.00 FR30MT2565 30 1-16/ER25 42 5000 1:1 97 64 74.5 41 26 65 $2,150.00 FL30MT2565 30 1-16/ER25 42 5000 1:1 97 64 74.5 41 26 65 $2,150.00 FR30MT2585 30 1-16/ER25 42 5000 1:1 117 64 74.5 41 26 85 $2,150.00 FL30MT2585 30 1-16/ER25 42 5000 1:1 117 64 74.5 41 26 85 $2,150.00 FR40MT3265 40 2-20/ER32 50 5000 1:1 99 80 71 40 23 65 $2,450.00 FL40MT3265 40 2-20/ER32 50 5000 1:1 99 80 71 40 23 65 $2,450.00 FR40MT3285 40 2-20/ER32 50 5000 1:1 119 80 71 40 23 85 $2,550.00 FL40MT3285 40 2-20/ER32 50 5000 1:1 119 80 71 40 23 85 $2,550.00 FR40MT32100 40 2-20/ER32 50 5000 1:1 134 80 71 40 23 100 $2,740.00 FL40MT32100 40 2-20/ER32 50 5000 1:1 134 80 71 40 23 100 $2,740.00 FR50MT4075 50 3-26/RT40 60 5000 1:1 115 88 103 56 40 75 $3,450.00 FL50MT4075 50 3-26/RT40 60 5000 1:1 115 88 103 56 40 75 $3,450.00 *With IC *Double Torque *Double Torque w/ic *Double Speed *Double Speed w/ IC FR20MT2045K FR20MT2045/2 FR20MT2045/2K FR20MT2045*2 FR20MT2045*2K FL20MT2045K FR30MT2565K FL30MT2565K FR30MT2585K FL30MT2585K FR40MT3265K $3,350.00 FL40MT3265K $3,350.00 FR40MT3285K FL40MT3285K FR40MT32100K FL40MT32100K FR50MT4075K FL50MT4075K **IC: Internal Coolant FL20MT2045/2 FR30MT2565/2 FL30MT2565/2 FR30MT2585/2 FL30MT2585/2 FR40MT3265/2 FL40MT3265/2 FR40MT3285/2 FL40MT3285/2 FR40MT32100/2 FL40MT32100/2 FR50MT4075/2 FL50MT4075/2 **Max 2500rpm FL20MT2045/2K FR30MT2565/2K FL30MT2565/2K FR30MT2585/2K FL30MT2585/2K FR40MT3265/2K FL40MT3265/2K FR40MT3285/2K FL40MT3285/2K FR40MT32100/2K FL40MT32100/2K FR50MT4075/2K FL50MT4075/2K **Max2500rpm FL20MT2045*2 FR30MT2565*2 FL30MT2565*2 FR30MT2585*2 FL30MT2585*2 FR40MT3265*2 FL40MT3265*2 FR40MT3285*2 FL40MT3285*2 FR40MT32100*2 FL40MT32100*2 FR50MT4075*2 FL50MT4075*2 **Max 8000rpm FL20MT2045*2K FR30MT2565*2K FL30MT2565*2K FR30MT2585*2K FL30MT2585*2K FR40MT3265*2K FL40MT3265*2K FR40MT3285*2K FL40MT3285*2K FR40MT32100*2K FL40MT32100*2K FR50MT4075*2K FL50MT4075*2K **Max 8000rpm page 114

VDI Tool Holder Spur Coupling MT Radial Driven Tools Spur Coupling MT Brauffaldi Turret Radial Tapping Forward Head R17 MT Spur Coupling D DIN69880 X S MAX. r.p.m. i A B C F G M TFR3MIT1665 30 1-10/ER16 32 3000 1:1 97 64 75 41 30 65 $2,230.00 TFL30MT1665 30 1-10/ER16 32 3000 1:1 97 64 75 41 30 65 $2,230.00 TFR30MT1685 30 1-10/ER16 32 3000 1:1 117 64 75 41 30 85 $2,230.00 TFL30MT1685 30 1-10/ER16 32 3000 1:1 117 64 75 41 30 85 $2,230.00 TFR40MT2065 40 1-13/ER20 35 3000 1:1 99 80 70 40 25 65 $2,290.00 TFL40MT2065 40 1-13/ER20 35 3000 1:1 99 80 70 40 25 65 $2,290.00 TFR40MT2085 40 1-13/ER20 35 3000 1:1 119 80 70 40 25 85 $2,300.00 TFL40MT2085 40 1-13/ER20 35 3000 1:1 119 80 70 40 25 85 $2,300.00 TFR50MT2575 50 1-16/ER25 42 3000 1:1 115 88 103 56 42 75 $3,100.00 TFL50MT2575 50 1-16/ER25 42 3000 1:1 115 88 103 56 42 75 $3,100.00 Radial Drilling & Milling Head w/ Disk Cutter Unit External coolant supply R29 Spur Coupling (MT) BARUFFALDI TYPE MT Spur Coupling D DIN69880 X MAX. r.p.m. i A B C E F G H K M BR30MT16C/3 30 29 3000 3:1 124 64 45 77.5 34 18 62 16 100 $4,150.00 BL30MT16C/3 30 29 3000 3:1 124 64 45 77.5 34 18 62 16 100 $4,150.00 BR40MT16C/3 40 30.5 3000 3:1 127 70 45 77.5 34 18 62 16 103 $4,500.00 BL40MT16C/3 40 30.5 3000 3:1 127 70 45 77.5 34 18 62 16 103 $4,500.00 Radial Drilling & Milling Heads w/ Double Collets To be used for collet DIN 6499 External coolant supply Collet is not included R30 MT Spur Coupling D DIN69880 X S MAX. r.p.m. i A B C G M DF30MT2585D 30 1-16/ER25 42 4000 1:1 112 64 66 27 85 $3,770.00 DF40MT3285D 40 2-20/ER32 50 4000 1:1 119 80 82 28 85 $3,920.00 DF40MT32100D 40 2-20/ER32 50 4000 1:1 134 80 82 28 100 $4,170.00 page 115

VDI Tool Holder Spur Coupling MT Angular Head To be used for collet DIN 6499 External coolant supply Collet is not included R31 (A28) MT Spur Coupling D DIN69880 X MAX. r.p.m. i A B C E F G M DA30MT20B 30 1-13/ER20 4000 1:1 ±90 64 59 54 32 27 67 $5,870.00 DA40MT25B 40 1-16/ER25 4000 1:1 ±90 76 65 65 38 29 70 $6,270.00 Radial Driven Tools - HAAS Radial Drilling & Milling Head Machine D X S MAX. r.p.m. A B C G M E FL40HS32.10485 SL-20/TL-15 40 2-20/ ER32 50 4000 106 80 76.5 27.5 70 104.85 $1,800.00 FL40HS32.11755 SL-30/TL-25 40 2-20/ ER32 50 4000 106 80 76.5 27.5 70 117.55 $1,800.00 FL40HS32.11755 SL-40 40 2-20/ ER32 50 4000 106 80 76.5 27.5 70 117.55 $1,800.00 FL40HS32.13025 SL-40 40 2-20/ ER32 50 4000 106 80 76.5 27.5 70 130.25 $2,180.00 Axial Driven Tools - HAAS Axial Drilling & Milling Head Machine D X S MAX. r.p.m. A B C E DA40HS32.10485 SL-20/TL-15 40 2-20/ ER32 50 4000 107.5 34 86 104.85 $1,200.00 DA40HS32.11755 SL-30/TL-25 40 2-20/ ER32 50 4000 107.5 34 86 117.55 $1,200.00 DA40HS32.11755 SL-40/ST-20,30 40 2-20/ ER32 50 4000 107.5 34 86 117.55 $1,200.00 DA40HS32.13025 SL-40 40 2-20/ ER32 50 4000 107.5 34 86 130.25 $1,400.00 page 116

Tool Holder Mazak VDI Tool Holder MK Series For V Type Holder MK1 MULTIPLEX SUPER QUICK TURN MAZAK MK1 MP410N-12D, 415N-12D MP610-12D, 6100-16D, 6200-16D MP420N-12D, 620N-12D MP620-12D, 6200-12D MP420N-12D, 620N-12D MP620-12D, 6200-12D MULTIPLEX 630-12D,6300-12D, 430 SQT 10M/MS-12 100M/MS -12D 15AM/M/MS-16D 200M/MS-16D 250M/MS-16D QTN 100M-12X 200M/MS-12X 250M/MS-16X Machine MULTIPLEX 610/6100/6200 MULTIPLEX 620/6200 MULTIPLEX 620/6200 MULTIPLEX 630/6300 NEXUS QTNX 100/ 100-II + SQT10 Max rpm 5000 A B C D Tool System Collet DIN-6499 53468010100 50mm 110mm 68mm 76mm ER25 1-16MM (5346100) 1.97 4.33 2.68 2.99 ER-25 1/8-5/8 53478010200 50mm 110mm 70mm 80mm ER25 1-16MM (5347200) 1.97 4.33 2.76 3.15 ER-25 1/8-5/8 5347232 50mm 110mm 70mm 80mm ER32 2-20MM 1.97 4.33 2.76 3.15 ER-32 1/8-3/4 5348100 70mm 132mm 75mm 96mm ER32 2-20MM 2.76 5.20 2.95 3.78 ER-32 1/8-3/4 5352707 50mm 110mm 68mm 76mm ER25 1-16MM 1.97 4.33 2.68 2.99 ER-25 1/8-5/8 $1,990.00 $1,990.00 $2,150.00 $2,945.00 $1,950.00 MK2 MK3 V Type Holder SUPER QUICK TURN MAZAK MK2 SQT 10M/MS-12 100M/MS -12D 15AM/M/MS-16D 200M/MS-16D 250M/MS-16D SQT 15M/MS-12X 18M/MS-12X 200M/MS-12X 250M/MS-12X SQT 28 M/MS-12X 30 M/MS-12X 300 M/MS-12X V Type Holder MULTIPLEX MAZAK MK3 SUPER QUICK TURN MP410N-12D, 415N-12D MP610-12D, 6100-16D, 6200-16D MP420N-12D, 620N-12D MP620-12D, 6200-12D MP420N-12D, 620N-12D MP620-12D, 6200-12D SQT 10M/MS-12 100M/MS -12D 15AM/M/MS-16D 200M/MS-16D 250M/MS-16D SQT 15M/MS-12D 18M/MS-12D 200M/MS-12D 250M/MS-12D SQT 15M/MS-12D 18M/MS-12D 200M/MS-12D 250M/MS-12D QTN 100M-12X 200M/MS-12X 250M/MS-16X QTNX 200M/MS-12X 250M/MS-12X QTNX 300 M/MY-12X 350 M/MY-12X 400 M-12X 450 M-12X QTN 100M-12D 200M/MS-12D 250M/MS-16D QTNX 200M/MS-12D 250M/MS-12D QTNX 200M/MS-12D 250M/MS-12D Machine NEXUS QTNX 100/ 100-II + SQT10 NEXUS QTNX 200/250 + SQT15/18 NEXUS QTN 300/350/400/450 + SQT28/30 Machine MULTIPLEX 610/6100/6200 MULTIPLEX 620/6200 MULTIPLEX 620/6200 NEXUS QTNX 100/ 100-II + SQT10 NEXUS QTNX 200/250 + SQT15/18 NEXUS QTNX 200/250 + SQT15/18 Max. rpm 5000 A B C D Tool System Collet DIN-6499 53528010700 50mm 96mm 68mm 76mm ER25 1-16MM $2,150.00 (5352700) 1.97 3.78 2.68 2.99 ER-25 1/8-5/8 53628010200 (5362200) 5362201 *** (1:2) 7000 rpm Max. rpm 6000 53468800101 (5346101) B C D Tool System Collet DIN-6499 105mm 4.13 5347202 105mm 4.13 5347201 107mm 4.21 5352201 110mm 4.33 5362632 117mm 4.61 5362632L 50mm 1.97 50mm 1.97 5362232 50mm 1.97 5382100 70mm 2.76 *** Double Torque/ Double Speed are also available 110mm 4.33 110mm 4.33 110mm 4.33 132mm 5.20 133.5mm 5.25 70mm 2.76 70mm 2.76 70mm 2.76 70mm 2.95 68mm 2.68 70mm 2.75 70mm 2.75 68mm 2.67 70mm 2.76 70mm 2.76 80mm 3.15 80mm 3.15 80mm 3.15 96mm 3.78 76mm 2.99 80mm 3.15 80mm 3.15 76mm 2.99 80mm 3.15 80mm 3.15 ER25 1-16MM ER-25 1/8-5/8 ER25 1-16MM ER-25 1/8-5/8 ER32 2-20MM ER-32 1/8-3/4 ER32 2-20MM ER-32 1/8-3/4 ER25 1-16MM ER-25 1/8-5/8 ER32 2-20MM ER-32 1/8-3/4 ER32 2-20MM ER-32 1/8-3/4 ER25 1-16MM ER-25 1/8-5/8 ER32 2-20MM ER-32 1/8-3/4 ER32 2-20MM ER-32 1/8-3/4 $2,150.00 $2,990.00 $2,380.00 $4,500.00 *** Double Torque/ Double Speed are also available $1,630.00 $1,720.00 $1,720.00 $1,630.00 $1,690.00 $1,895.00 MK4 MULTIPLEX V Type Holder SUPER QUICK TURN MAZAK MK4 MULTIPLEX 6100, 6150,610,615,410,415 MULTIPLEX 620,625,420,425 SQT 10M/MS-12 100M/MS -12D 15AM/M/MS-16D 200M/MS-16D 250M/MS-16D SQT 15M/MS-12D 18M/MS-12D 200M/MS-12D 250M/MS-12D QTN 100M-12D 200M/MS-12D 250M/MS-16D QTNX 200M/MS-12D 250M/MS-12D page 117 Machine MULTIPLEX 610/6100/6200 MULTIPLEX 620/6200 NEXUS QTNX 100/ 100-II + SQT10 NEXUS QTNX 200/250 + SQT15/18 Max. rpm 6000 5346102 60mm 2.36 5347212 70mm 2.76 53528010200 (5352200) 5362218 70mm 2.76 A B C D Tool system Collet DIN-6499 90mm 61mm 76mm ER25 1-16MM $1,250.00 3.54 2.40 2.99 ER-25 1/8-5/8 90mm 78mm 80mm ER25 1-16MM $1,250.00 3.54 3.07 3.15 ER-25 1/8-5/8 90mm 90mm 61mm 76mm ER25 1-16MM $1,250.00 3.54 3.54 2.40 2.99 ER-25 1/8-5/8 90mm 3.54 78mm 3.07 80mm 3.15 ER32 2-20MM $1,310.00 *** Double Torque/ Double Speed are also available

Tool Holder Mazak MK5 MK6 MK7 MK8 MULTIPLEX SUPER QUICK TURN H Type Holder MAZAK MK5 MP410N-12D, 415N-12D MP610-12D, 6100-16D, 6200-16D MP420N-12D, 620N-12D MP620-12D, 6200-12D MULTIPLEX 630-12X,6300-12X, 430 H Type Holder MAZAK MK6 SQT 10M/MS-12 100M/MS -12D 15AM/M/MS- 16D 200M/MS-16D 250M/MS-16D SQT 15M/MS-12X 18M/MS-12X 200M/MS-12X 250M/MS-12X SQT QTNX 28 M/MS-12X 30 M/MS-12X 300 M/MS-12X 28M,30M, 28MS, 30MS QTN 300/350 QTN 100M-12X 200M/MS-12X 250M/MS-16X QTNX 200M/MS-12X 250M/MS-12X 300 M/MY-12X 350 M/MY-12X 400 M-12X 450 M-12X SUPER QUICK TURN H Type Back Holder MAZAK MK7 MULTIPLEX SUPER QUICK TURN SQT QTN 10M/MS-12 100M-12D 100M/MS -12D 200M/MS-12D 15AM/M/MS-16D 250M/MS-16D 200M/MS-16D 250M/MS-16D SQT 15M/MS-12D 18M/MS-12D 200M/MS-12D 250M/MS-12D SQT 28 M/MS-12X 30 M/MS-12X 300 M/MS-12X QTNX 200M/MS-12D 250M/MS-12D QTNX 300 M/MY-12X 350 M/MY-12X 400 M-12X 450 M-12X Tap Holder MAZAK MK8 MULTIPLEX 6100, 6150 610,615,410,415 MULTIPLEX 620,625,420,425 SQT 10M/MS-12 100M/MS -12D 15AM/M/MS-16D 200M/MS-16D 250M/MS-16D SQT 15M/MS-12D 18M/MS-12D 200M/MS-12D 250M/MS-12D SQT 18MS, 18MS-Y QTN 100M-12D 200M/MS-12D 250M/MS-16D QTNX 200M/MS-12D 250M/MS-12D Machine MULTIPLEX 610/6100/6200 MULTIPLEX 610/6100/6200 MULTIPLEX 620/6200 MULTIPLEX 620/6200 MULTIPLEX 620/6200 MULTIPLEX 630/6300 Machine NEXUS QTNX 100/ 100-II + SQT10 NEXUS QTNX 100/ 100-II + SQT10 NEXUS QTNX 200/250 + SQT15/18 NEXUS QTNX 200/250 + SQT15/18 NEXUS QTN 300/350/400/450 + SQT28/30 Machine NEXUS QTNX 100/ 100-II + SQT10 NEXUS QTNX 200/250 + SQT15/18 Max rpm: 5000 A B C D Tool System Collet DIN-6499 53468010800 115mm 80mm 68mm 76mm ER25 1-16MM $2,300.00 (5346800) 4.53 3.15 2.68 2.99 ER25 1/8-5/8 5346832 115mm 80mm 68mm 76mm ER32 2-20MM $2,550.00 4.53 3.15 2.68 2.99 ER32 1/8-3/4 53478010600 130mm 80mm 70mm 80mm ER25 1-16MM $2,360.00 (5347600) 5.12 3.15 2.76 3.15 ER25 1/8-5/8 5347632 130mm 80mm 70mm 80mm ER32 2-20MM $2,380.00 5.12 3.15 2.76 3.15 ER32 1/8-3/4 5347632-1 130mm 80mm 70mm 80mm ER32 2-20MM $4,300.00 (1:2) 7000RPM 5.12 3.15 2.76 3.15 ER32 1/8-3/4 53488001001 175mm 75mm 96mm $4,260.00 (5348001) 6.89 2.95 3.78 Max rpm 5000 53528010100 (5352100) 5352132 100mm 3.94 53628010100 (5362100) A B C D Tool System Collet DIN-6499 100mm 80mm 68mm 76mm ER25 1-16MM $2,490.00 3.94 3.15 2.68 2.99 ER25 1/8-5/8 130mm 5.12 5362132 130mm 5.12 5382002 160mm 6.30 *** Double Torque/ Double Speed are also available 80mm 3.15 80mm 3.15 84mm 3.31 110mm 4.33 68mm 2.68 70mm 2.76 70mm 2.76 70mm 2.76 76mm 2.99 80mm 3.15 80mm 3.15 96mm 3.78 ER32 2-20MM ER32 1/8-3/4 ER25 1-16MM ER25 1/8-5/8 ER32 2-20MM ER32 1/8-3/4 ER32 2-20MM ER32 1/8-3/4 $2,520.00 $2,520.00 $2,700.00 $4,275.00 *** Double Torque/ Double Speed are also available A B C E M Tool System Collet DIN-6499 53548010300 (5354300) 119mm 4.68 5354332 137mm 5.39 53648010300 (5364300) 162mm 6.38 5364332 162mm 6.38 5364332-1 162mm 6.38 NEXUS QTN 53848000900 300/350/400/450 (5384900) + SQT28/30 Machine MULTIPLEX 610/6100/6200 NEXUS QTNX 100/ 100-II + SQT10 NEXUS QTNX 200/250 + SQT15/18 197mm 7.76 75mm 2.95 76mm 2.99 80mm 3.15 80mm 3.15 80mm 3.15 90mm 3.54 78mm 3.07 50mm 1.97 57mm 2.24 58mm 2.28 82.5mm 3.25 81mm 3.19 24.5mm 0.96 mm 22.5mm 0.89 22.5mm 0.89 22.5mm 0.89 49mm 1.93 92mm 3.62 100mm 3.94 125mm 4.92 125mm 1.92 125mm 1.92 160mm 6.30 ER25 1-16MM ER25 1/8-5/8 ER32 2-20MM ER32 1/8-3/4 ER25 1-16MM ER25 1/8-5/8 $2,700.00 $2,700.00 $2,490.00 ER32 2-20MM $2,690.00 ER32 1/8-3/4 ER32 2-20MM $2,991.00 ER32 1/8-3/4 ER32 2-20MM $3,950.00 ER32 1/8-3/4 *** Double Torque/ Double Speed are also available A B C D Tool System 5346212 60mm 2.36 5347412 70mm 2.76 5352400 60mm 2.36 5362220 mm 5362412 70mm 2.76 90mm 3.54 90mm 3.54 90mm 3.54 120 mm 4.72 90mm 3.54 71mm 2.40 78mm 3.07 71mm 2.40 mm 78mm 3.07 76mm 2.99 80mm 3.15 76mm 2.99 80 mm 3.15 80mm 3.15 ER20 M4-M12 $1,350.00 No8. UNC-1/2 UNC ER20 M4-M12 $1,350.00 No8. UNC-1/2 UNC ER20 M4-M12 $1,350.00 No8. UNC-1/2 UNC ER20 1-13 $ 1,840.00 ER20 M4-M12 No8. UNC-1/2 UNC $1,520.00 page 118

Tool Holder Mazak VDI Tool Holder MK Series For MK9 MULTIPLEX SUPER QUICK TURN Tap Holder MAZAK MK9 MP410N-12D, 415N-12D MP610-12D, 6100-16D, 6200-16D MP420N-12D, 620N-12D MP620-12D, 6200-16D MULTIPLEX 630-12D,6300-12D, 430 Machine MULTIPLEX 610/6100/6200 MULTIPLEX 620/6200 MULTIPLEX 630/6300 MAX rpm 4000 53468010200 (5346200) 53478010400 (5347400) A B C D Tool System Collet DIN-6499 50mm 110mm 68mm 76mm ER20 M4-M12 $2,200.00 1.97 4.33 2.68 2.99 No8. UNC-1/2 50mm 1.97 5348300 75mm 2.95 110mm 4.33 132mm 5.20 70mm 2.76 75mm 2.95 80mm 3.15 96mm 3.78 ER20 M4-M12 No8. UNC-1/2 ER20 M4-M12 No8. UNC-1/2 $2,200.00 $4,300.00 *** Double Torque/ Double Speed are also available MK10 SUPER QUICK TURN Tap Holder MAZAK MK10 SQT 10M/MS-12 100M/MS -12D 15AM/M/MS-16D 200M/MS-16D 250M/MS-16D SQT 15M/MS-12D 18M/MS-12D 200M/MS-12D 250M/MS-12D SQT 28 M/MS-12X 30 M/MS-12X 300 M/MS-12X QTN 100M-12D 200M/MS-12D 250M/MS-16D QTNX 200M/MS-12D 250M/MS-12D QTNX 300 M/MY-12X 350 M/MY-12X 400 M-12X 450 M-12X Machine NEXUS QTNX 100/ 100-II + SQT10 NEXUS QTNX 200/250 + SQT15/18 NEXUS QTN 300/350/400/450 + SQT28/30 Max rpm 4000 A B C D Tool system 5352800 50mm 96mm 68mm 76mm ER-20 M4-M12 $2,550.00 (53528010800) 1.97 3.78 2.68 2.99 No.8 UNC-1/2 5362400 50mm 110mm 70mm 80mm ER-20 M4-M12 $2,980.00 (53628010400) 1.97 4.33 2.75 3.15 No.8 UNC-1/2 5382000 75mm 2.95 132mm 5.20 70mm 2.76 96mm 3.78 ER-20 M4-M12 No.8 UNC-1/2 $3,100.00 *** Double Torque/ Double Speed are also available MK12 SUPER QUICK TURN H Type Tap Holder MAZAK MK12 SQT 10M/MS-12 100M/MS -12D 15AM/M/MS-16D 200M/MS-16D 250M/MS-16D SQT 15M/MS-12D 18M/MS-12D 200M/MS-12D 250M/MS-12D SQT 28 M/MS-12X 30 M/MS-12X 300 M/MS-12X QTN 100M-12D 200M/MS-12D 250M/MS-16D QTNX 200M/MS-12D 250M/MS-12D QTNX 300 M/MY-12X 350 M/MY-12X 400 M-12X 450 M-12X Machine NEXUS QTNX 100/ 100-II + SQT10 NEXUS QTNX 200/250 + SQT15/18 NEXUS QTN 300/350/400/450 + SQT28/30 Max rpm 3000 53528010300 (5352300) 53628010300 (5362300) A B C D Tool System Collet DIN-6499 50mm 96mm 68mm 76mm ER20 M4-M12 1.97 3.78 2.68 2.99 No8. UNC-1/2 50mm 1.97 5384000 75mm 2.95 110mm 4.33 132mm 5.20 70mm 2.76 70mm 2.76 80mm 3.15 96mm 3.78 ER20 M4-M12 No8. UNC-1/2 ER20 M4-M12 No8. UNC-1/2 $2,600.00 $2,600.00 $4,800.00 *** Double Torque/ Double Speed are also available MK13 SUPER QUICK TURN H Type Tap Holder MAZAK MK13 SQT 10M/MS-12 100M/MS -12D 15AM/M/MS-16D 200M/MS-16D 250M/MS-16D SQT 15M/MS-12D 18M/MS-12D 200M/MS-12D 250M/MS-12D SQT 28 M/MS-12X 30 M/MS-12X 300 M/MS-12X QTN 100M-12D 200M/MS-12D 250M/MS-16D QTNX 200M/MS-12D 250M/MS-12D QTNX 300 M/MY-12X 350 M/MY-12X 400 M-12X 450 M-12X Machine NEXUS QTNX 100/ 100-II + SQT10 NEXUS QTNX 200/250 + SQT15/18 NEXUS QTN 300/350/400/450 + SQT28/30 Max rpm 3000 53548010200 (5354200) 53648010200 (5364200) A B C D Tool System Collet DIN-6499 100mm 47mm 68mm 76mm ER20 M4-M12 $2,805.00 3.94 1.85 2.68 2.99 No8. UNC-1/2 125mm 4.92 5384800 160mm 6.30 47mm 1.85 47mm 1.85 70mm 2.76 70mm 2.76 80mm 3.15 96mm 3.78 ER20 M4-M12 No8. UNC-1/2 ER20 M4-M12 No8. UNC-1/2 $2,805.00 $4,225.00 *** Double Torque/ Double Speed are also available page 119

Tool Holder Mazak VDI Tool Holder MK Series For V Type Polygon Holder MK15 MULTIPLEX MAZAK MK15 Machine 5347670 5346270 MULTIPLEX 610, 615, 6100, 6150 MULTIPLEX 610/6100/6200 B C d D H 5346270 80mm 3.15 126mm 4.96 22mm 7/8 50mm 2 46mm 1.81 $1,461.00 MULTIPLEX 6200, 6250 5347670 80mm 3.15 126mm 4.96 22mm 7/8 50mm 2 46mm 1.81 $1,461.00 *** Double Torque/ Double Speed are also available MK16 SUPER QUICK TURN V Type Polygon Holder 5352770 5363370 5348170 MAZAK MK16 SQT 200, 250 SQT QTNX 28 M/MS-12X 300 M/MY-12X 30 M/MS-12X 350 M/MY-12X 300 M/MS-12X 400 M-12X 450 M-12X Machine NEXUS QTN 300/350/400/450 + SQT28/30 A B C d D H 5352770 50mm 1.97 76mm 2.99 5362270 50mm 90mm 1.97 3.54 5348170 70mm 109.5mm 2.76 4.31 122mm 4.80 136mm 5.35 155.5mm 6.12 22mm 7/8 50mm 2 46mm 1.81 $2,250.00 22mm 50mm 46mm $2,350.00 7/8 2 1.81 22mm 50mm 46mm $3,680.00 7/8 2 1.81 *** Double Torque/ Double Speed are also available H Type Double Collet Holder MK17, 18 MAZAK MK17,18 SQT 10M/MS-12 100M/MS -12D 15AM/M/MS-16D 200M/MS-16D 250M/MS-16D SQT 15M/MS-12D 18M/MS-12D 200M/MS-12D 250M/MS-12D QTN 100M-12D 200M/MS-12D 250M/MS-16D QTNX 200M/MS-12D 250M/MS-12D Machine NEXUS QTNX 100/ 100-II + SQT10 NEXUS QTNX 200/250 + SQT15/18 Max rpm D X S A B C C1 E E1 M 4000 mm 5352111 40 1ST-ER35 42mm 1.65 130mm 75 mm 103 mm 77.5 mm 37 mm 16 mm 100 mm $3,500.00 2nd-ER20 35mm 1.38 5.12 2.95 4.06 3.05 1.46 0.63 3.94 5364111 40 2-20 ER32 42 mm 1.65 167 mm 6.57 80 mm 3.15 119 mm 4.69 50 mm 1.97 89 mm 3.5 19 mm 0.75 130 mm 5.12 $3,850.00 Face Mill Holder MULTIPLEX 5346601 SUPER QUICK TURN 5354601 MK19 DIN-6366 5347601 MAZAK MK19 MP410N-12D, 415N-12D MP610-12D, 6100-16D, 6200-16D,6150,615,6150 MULTIPLEX 6200, 6250 SQT 10M/MS-12 100M/MS -12D 15AM/M/MS-16D 200M/MS-16D, 250M/MS-16D SQT 15M/MS-12D 18M/MS-12D 200M/MS-12D, 250M/MS-12D QTN 100M-12D 200M/MS-12D 250M/MS-16D QTNX 200M/MS-12D 250M/MS-12D Machine MULTIPLEX 610/6100/6200 NEXUS QTNX 100/ 100-II + SQT10 NEXUS QTNX 200/250 + SQT15/18 Tool System: DIN-6366 B C C1 D D1 D2 E F G H 53468000601 (5346601) 110mm 4.33 5347601 150mm 5.91 5354601 150mm 5.91 5362601 150mm 5.91 68 120 2.68 4.72 68 120 2.68 4.72 68 120 2.68 4.72 70 120 2.76 4.72 76 2.99 80 3.15 75 2.95 80 3.15 22 50 0.87 1.97 22 50 0.87 1.97 22 50 0.87 1.97 22 50 0.87 1.97 93 3.66 93 3.66 93 3.66 93 3.66 60 12 2.36 0.47 70 12 2.76 0.47 60 12 2.36 0.47 70 12 2.76 0.47 31 1.22 31 1.22 31 1.22 31 1.22 $1,620.00 $1,750.00 $1,890.00 $1,950.00 *** Double Torque/ Double Speed are also available page 120

Disk Cutter Unit Machine Type SQT 15M-12D, 18M-12D, SQT200M-12D, 250M-12D QTN200M/ 250M SQT 15/18M 536131734016C $3,950.00 Tool Holder Mazak Angular Head MAZAK MP410N-12D, 415N-12D MP610-12D, 6200-16D MP420N-12D, 620N-12D MP620-12D, 6200-16D Machine G M MP610 5346101-25B-70 29.5mm 70mm $6300.00 1.16 2.76 5346101-25B-127 127mm $ call 5 MP620 5347201-25B-90 90mm $ call 3.54 D=40MM X =1-16 ER25 S=42mm Max RPM=4000 A=+90 0 B=38mm C=65mm E=65.5mm MAZAK SQT10M-12D, 15M-16D SQT200M-16D, 250M-16D SQT15M-12D, 18M-12D SQT200M-12D, 250M-12D Machine QTN 100M/150M SQT 10M QTN 200M/250M SQT 15M/18M G M 5352200-25B 29.5mm 1.16 70mm 2.76 5362218-25B 90mm 3.54 $5600.00 $5700.00 D=40MM X =1-16/ER25 S=42mm Max RPM=4000 A=+90 0 B=38mm C=65mm F=65mm Turning Toolholder for MAZAK For Mazak Integrex 50Y and 70 Y Machines MC1 MC2 MC4 MC3 MC1/MC3: Right-Hand (Top)/Right-Hand Inverted (Bottom) d1 b4 b5 b6 h1 h6 h7 L1 L2 RH RH Inverted (inch) MC15025 MC35025 50 107 57 31.8 1 50 29 135 10 $850.00 MC16032 MC36032 60 122 72 40 1 1/4 56 335 155 10 $1,180.00 Collet Chuck for MAZAK ME3 Boring Bar Holder for MAZAK MC2/MC4: Left-Hand (Top) /Left-Hand Inverted (Bottlm) d1 b4 b5 b6 h1 h6 h7 L1 L2 LH LH Inverted (inch) MC25025 MC45025 50 107 57 31.8 1 50 29 135 10 $850.00 MC26032 MC46032 60 122 72 40 1 1/4 56 335 155 10 $1,180.00 ME3: ER32/TG100 UNIT: MM d1 Collet d2 d6 d10 L3 L9 ME350ER32 50 ER32 2~20 70 50 21 106.5 $750.00 ME360ER32 60 ER32 2~20 70 50 21 106.5 $1,600.00 ME350TG100 50 100TG 2~25 70 60 21 112 $750.00 ME360TG100 60 100TG 2~25 70 60 32 112 $1,600.00 ME4 page 121 ME4: Single External Coolant Flow UNIT:MM d1 d2 d6 d8 L3 L6 L7 ME45050 50 2 95.5 85 21 135 115 $75 0.00 ME46050 60 2 120 98 25 128 112 $1,250.00

Tool Holder Mazak A B C D E F G H Forward Turn Reverse Turn Boring Bar DESCRIPTION New QT8 8D QT8 12D Facing Holder (right-hand) QT15 8D Q515 8D-16 POSITION QT15 12D QT28 8D QT28 12D QT35 12D - 24Position QT350 12D-24Position U-Drill Holder QT40 12D-24 Position QT200C 12D QT250 12D QTN150 QTN200/250/ 300/350 QTN100/ 12 Position QTN400/450 SQT10 Cut Off Holder (right-hand) SQT15/ SQT18M SQT28/30 SQT100M/MS SQT200 12D SQT200/250M 16 Station SQT200/250MS Double Turn SQT300M QTN100/150M &MS QTN200/250M&MS QTN300/350M&MS QTN400/450M DUAL TURN20 Double Boring Bar MULTIPLEX 610/410 MULTIPLEX 6100 MULTIPLEX625/620/420 MULTIPLEX 6200Y 12D MULTIPLEX 6200Y 16D MULTIPLEX 630/430 MULTIPLEX 6300 53108010400 Boring Bar Holder $610.00 V 53538010200 Boring Bar Holder (0.750 )/ 110-BOH* $830.00 V 53468005400 Boring Bar Holder (1.000 ).. $790.00 V 53478005400 Boring Bar Holder (1.000 ).. $770.00 V 53578005500 Boring Bar Holder (1.000 ) $700.00 V 51478001602 Boring Bar Holder (1.000 ) $630.00 V 53178006101 Boring Bar Holder (1.250 ) $950.00 V V 53258010500 Boring Bar Holder (1.250 ) $720.00 V 53468005300 Boring Bar Holder (1.250 ) $730.00 V 53488006301 Boring Bar Holder (1.250 )/ 630-BOH50* $1,850.00 V 53838010900 Boring Bar Holder (1.250 )/ 128-SBH50 $1,800.00 V 53178005101 Boring Bar Holder (1.500 ) $950.00 V 53208015100 Boring Bar Holder (1.500 ) $970.00 V V 53378010302 Boring Bar Holder (1.500 ) $970.00 V V 53418010403 Boring Bar Holder (1.500 ) $760.00 V V V 53418014600 Boring Bar Holder (1.500 ) $930.00 V 53478005300 Boring Bar Holder (1.500 ) $920.00 V 53578005300 Boring Bar Holder (1.500 ) $890.00 V 53618010200 Boring Bar Holder (1.500 )/ 115-BOH40 $840.00 V MZK8211 Boring Bar Holder (1.500 )Thru Coolant $1,440.00 V V V 53248010500 Boring Bar Holder (1-1/4 ) $1,290.00 V V V 53518010200 Boring Bar Holder (1-1/4 )/ 110-BOH40 $850.00 V 51488000601 Boring Bar Holder (2.000 ) $1,810.00 V V V 53308010200 Boring Bar holder (2.000 ) $1,940.00 V V V V 53428004502 Boring Bar Holder (2.000 ) $960.00 V 53488006201 Boring Bar Holder (2.000 )/ 630-BOH50 $1,780.00 V 53818010200 Boring Bar Holder (2.000 )/128-BOH50 $1,670.00 V V V V MZK8007B Boring Bar Holder (2.000 ) $1,100.00 V 53678000700/ Boring Bar Holder (2.000 ) Split (Hinge Type) $1,980.00 V V MZK8654 MZK8659 Boring Bar Holder (2.000 ) Split (Hinge Type) $1,980.00 MZK8660 Boring Bar Holder (2.000 ) Split (Cap Type) $1,420.00 MZK8768 Boring Bar Holder (2.500 ) $2,050.00 MZK8928 Boring Bar Holder (2.500 ) Split (Hinge Type) $2,100.00 V 53308000400 Cut Off Holder $1,810.00 V V V V 53468000601 Cut Off Holder $1,620.00 V V V 53478000900 Cut Off Holder/ 620-COH40 $980.00 V V 53488001601 Cut Off Holder/ 630-COH50 $1,690.00 V 53518000401 Cut Off Holder/ 110-COH40 $860.00 V V V V 53618010400 Cut Off Holder/ 115-COH40 $880.00 V V V 53818000401 Cut Off Holder/ 128-COH50 $1,410.00 V V V V 53468000900 Cut Off Holder (Z Offset)/ 610-COH40* $760.00 V V 53478000600 Cut Off Holder (Z Offset)/ 620-COH40* $980.00 V 53638010400 Double Boring Bar Holder (1.0 )/ 115-SBH40 V V V 53838010800 Double Turn Holder/128-DTH50 $2,100.00 V V V 53538010100 Double Turning Holder/ 110-DTH40 $870.00 V V V V 53638010300 Double Turning Holder/ 115-DTH40 $980.00 V V V V 51468002102 Facing Holder $540.00 51478015100 Facing Holder $710.00 51488000900 Facing Holder $1,380.00 V V V 53108010300 Facing Holder $590.00 V 53208010300 Facing Holder $700.00 V V 53258010400 Facing Holder $690.00 V 53308010300 Facing Holder $1,780.00 V V V 53418010201 Facing Holder $690.00 V 53418010500 Facing Holder $680.00 V V V V V V 53418014800 Facing Holder $690.00 V 53428001800 Facing Holder $890.00 V 53428004402 Facing Holder $1,020.00 V 53468005500 Facing Holder/ 610-FAH40 $1,020.00 V 53478005500 Facing Holder/ 620-FAH40 $760.00 V 53488006400 Facing Holder/ 630-FAH50 $1,320.00 V 53518010300 Facing Holder/110-FAH40 $930.00 V V V V 53568006601 Facing Holder $930.00 V V 53578005200 Facing Holder $890.00 V 53618010300 Facing Holder/ 115-FAH40 $1,420.00 V V V 53678000600 Facing Holder $1,430.00 V 53688000600 Facing Holder $1,790.00 V 53818010300 Facing Holder.../ 128-FAH50 $1,670.00 V V V 53818010100 Forward Turn Holder $1,670.00 V V V 53258010200 Forward Turning Holder V page 122

Tool Holder Mazak DESCRIPTION New QT8 8D QT8 12D QT15 8D Q515 8D-16 POSITION QT15 12D QT28 8D QT28 12D QT35 12D - 24Position QT350 12D-24Position QT40 12D-24 Position QT200C 12D QT250 12D QTN150 QTN200/250/ 300/350 QTN100/ 12 Position QTN400/450 SQT10 SQT15/ SQT18M SQT28/30 SQT100M/MS SQT200 12D SQT200/250M 16 Station SQT200/250MS SQT300M QTN100/150M &MS QTN200/250M&MS QTN300/350M&MS QTN400/450M DUAL TURN20 MULTIPLEX 610/410 MULTIPLEX 6100 MULTIPLEX625/620/420 MULTIPLEX 6200Y 12D MULTIPLEX 6200Y 16D MULTIPLEX 630/430 MULTIPLEX 6300 53818010100 Forward Turn Holder/ 128-FTH50 $1,670.00 V V V 53258010200 Forward Turning Holder POA V 53308010100 Forward Turning Holder $1,890.00 V V V 53418010700 Forward Turning Holder POA V V V V V 53418015000 Forward Turning Holder $1,680.00 V 53428004300 Forward Turning Holder $1,300.00 V 53468005201 Forward Turning Holder POA V V V 53478005200 Forward Turning Holder/ 620-FTH40 $870.00 V V 53488006101 Forward Turning Holder/ 630-FTH50 $1,760.00 V 53518010100 Forward Turning Holder/ 110-FTH40 $830.00 V V V V 53618010100 Forward Turning Holder/ 115 FTH40 $1,030.00 V V V 53688000500 Forward Turning Holder $1,780.00 V 53108010101 Fwd Turning Holder POA V 53208010400 Fwd/Rev Turning Holder POA V EOOP- Nozzles POA V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V BA6E020 51488000701 Offset Boring Bar Holder $2,660.00 V V V 53578005400 Offset Boring Bar Holder $920.00 V 53178006201 Offset Boring Bar Holder (1.250 ) $2,200.00 V V 53678000900 Turning Holder (Optional) $1,480.00 V PDT-MP1-H PDT-MP1-H..H-Type Mill/Drill Unit $5,210.00 V V PDT-MP1-V PDT-MP1-V..V-Type Mill/Drill Unit $4,740.00 V V PDT-MP2-H PDT-MP2-H..H-Type Mill/Drill Unit POA V V PDT-MP2- HTC PDT-MP2-HTC..H-Type Mill/Drill Unit.. Through Coolant $8,200.00 V V PDT-MP2-V PDT-MP2-V..V-Type Mill/Drill Unit $4,740.00 V V PDT-MP2- VTC PDT-MP2-VTC..V-Type Mill/Drill Unit..Through Coolant $7,400.00 V V PDT-MP3-H PDT-MP3-H..H Type Mill/Drill Unit $7,400.00 V V PDT-MP3- ER40 PDT-MP3-HTC V V HTC $16,800.00 PDT-MP3-V PDT-MP3-V..V Type Mill/Drill Unit $6,580.00 V V PDT-SQT1-H PDT-SQT1-H..H Type Mill/Drill Unit $5,200.00 V V V V PDT-SQT1-V PDT-SQT1-V..V Type Mill/Drill Unit $4,750.00 V V V V PDT-SQT2-H PDT-SQT2-H..H Type Mill/Drill Unit POA V V V PDT-SQT2- HDE PDT-SQT2-HDE..Double End Mill/Drill Unit $8,350.00 V V V PDT-SQT2- HTC PDT-SQT2-HTC..H Type Mill/Drill Unit.. Through Coolant POA V V V PDT-SQT2-V PDT-SQT2-V..V Type Mill/Drill Unit POA V V V PDT-SQT2- VTC PDT-SQT2-VTC..V Type Mill/Drill Unit.. Through Coolant POA V V V PDT-SQT3-H PDT-SQT3-H..H-Type Mill/Drill Unit $7,300.00 V V V V PDT-SQT3-V PDT-SQT3-V..V-Type Mill/Drill Unit $6,500.00 V V V V 53108010201 Reverse Turning Holder POA V 53258010300 Reverse Turning Holder POA V 53308010600 Reverse Turning Holder $1,820.00 V V V 53418010800 Reverse Turning Holder POA V V V V V 53468005101 Reverse Turning Holder $910.00 V V V 53478005100 Reverse Turning Holder/620RTH40 $675.00 V V 53488006001 Reverse Turning Holder/ 630-RTH50 $1,830.00 V 53518010700 Reverse Turning Holder/ 110-RTH40 $920.00 V V V V 53618010600 Reverse Turning Holder/ 115-RTH40 $880.00 V V V 53688000400 Reverse Turning Holder $1,780.00 V 53818010600 Reverse Turning Holder/ 128-RTH50 $1,560.00 V V V 51478015401 Socket 1 x 1/2 POA V 53448011800 Socket 1 x 1/2 POA V 53468006500 Socket 1 x 1/2 POA V V V V V 51478002700 Socket 1 x 1MT POA V V 53448012100 Socket 1 x 1MT $250.00 V V V V V 51478002600 Socket 1 x 2MT $250.00 V V 53448012200 Socket 1 x 2MT $250.00 V V V V V 51478015201 Socket 1 x 3/4 POA V 53448012000 Socket 1 x 3/4 POA V 53468006700 Socket 1 x 3/4 POA V V V V V 51478015501 Socket 1 x 3/8 POA V 53448011700 Socket 1 x 3/8 POA V 53468006400 Socket 1 x 3/8 POA V V V V V 51478015601 Socket 1 x 5/16 POA V 53448011600 Socket 1 x 5/16 $28.00 V 53468006300 Socket 1 x 5/16 POA V V V V V 51478015301 Socket 1 x 5/8 POA V 53448011900 Socket 1 x 5/8 POA V 53468006600 Socket 1 x 5/8 POA V V V V V 51378011200 Socket 1-1/2 x 1 POA V V V 53178011200 Socket 1-1/2 x 1 $260.00 V V V 53418011702 Socket 1-1/2 x 1 $345.00 V V V V V V V V 53418012402 Socket 1-1/2 x 1 POA V page 123

Tool Holder Mazak DESCRIPTION New QT8 8D QT8 12D QT15 8D Q515 8D-16 POSITION QT15 12D QT28 8D QT28 12D QT35 12D - 24Position QT350 12D-24Position QT40 12D-24 Position QT200C 12D QT250 12D QTN150 page 124 QTN200/250/ 300/350 QTN100/ 12 Position QTN400/450 SQT10 SQT15/ SQT18M SQT28/30 SQT100M/MS SQT200 12D SQT200/250M 16 Station SQT200/250MS SQT300M QTN100/150M &MS QTN200/250M&MS QTN300/350M&MS QTN400/450M DUAL TURN20 MULTIPLEX 610/410 MULTIPLEX 6100 MULTIPLEX625/620/420 MULTIPLEX 6200Y 12D MULTIPLEX 6200Y 16D 51378011500 Socket 1-1/2 x 1/2 $420.00 V V V 53178011500 Socket 1-1/2 x 1/2 $240.00 V 53418012002 Socket 1-1/2 x 1/2 $240.00 V V V V V V V 53418012702 Socket 1-1/2 x 1/2 POA V 53418016301 Socket 1-1/2 x 1/2 $460.00 V 51378011101 Socket 1-1/2 x 1-1/4 POA V V V 53178011100 Socket 1-1/2 x 1-1/4 $250.00 V V V 53418011602 Socket 1-1/2 x 1-1/4 $345.00 V V V V V V V V 53418012302 Socket 1-1/2 x 1-1/4 $420.00 V 53418013300 Socket 1-1/2 x 1MT $250.00 V V V V V V V V V V 53418013200 Socket 1-1/2 x 2MT $250.00 V V V V V V V V V V V 51378011300 Socket 1-1/2 x 3/4 $430.00 V V V 53178011300 Socket 1-1/2 x 3/4 $250.00 V 53418011802 Socket 1-1/2 x 3/4 $340.00 V V V V V V 53418012502 Socket 1-1/2 x 3/4 POA V 53418016101 Socket 1-1/2 x 3/4 POA V 51378011600 Socket 1-1/2 x 3/8 $420.00 V V 53178011600 Socket 1-1/2 x 3/8 POA V 53418012102 Socket 1-1/2 x 3/8 POA V V V V V V V 53418012802 Socket 1-1/2 x 3/8 POA V V 53418016401 Socket 1-1/2 x 3/8 $440.00 V 53418013100 Socket 1-1/2 x 3MT $250.00 V V V V V V V V V V 51378011700 Socket 1-1/2 x 5/16 POA V V 53418012202 Socket 1-1/2 x 5/16 POA V V V V V V V 53418012902 Socket 1-1/2 x 5/16 POA V V 53418016501 Socket 1-1/2 x 5/16 $465.00 V 51378011400 Socket 1-1/2 x 5/8 $420.00 V V 53178011400 Socket 1-1/2 x 5/8 $250.00 V 53418011902 Socket 1-1/2 x 5/8 $300.00 V V V V V V 53418012602 Socket 1-1/2 x 5/8 POA V 53418016201 Socket 1-1/2 x 5/8 $465.00 V 53178013100 Socket 1-1/4 x 1 $250.00 V V V V V 53258011600 Socket 1-1/4 x 1 POA V V 53518012000 Socket 1-1/4 x 1 POA V V V 53568007200 Socket 1-1/4 x 1 $250.00 V V 53178013401 Socket 1-1/4 x 1/2 $250.00 V V V V V 53258011300 Socket 1-1/4 x 1/2 $250.00 V V 53518012300 Socket 1-1/4 x 1/2 $250.00 V V V 53518013000 Socket 1-1/4 x 1MT $250.00 V V V V V V V V V V 53468006100 Socket 1-1/4 x 2MT $250.00 V V 53518013100 Socket 1-1/4 x 2MT POA V V V V V V V V V 53178013200 Socket 1-1/4 x 3/4 $250.00 V V V V V 53258011500 Socket 1-1/4 x 3/4 POA V V 53518012100 Socket 1-1/4 x 3/4 $250.00 V V V 53568007100 Socket 1-1/4 x 3/4 $250.00 V V 53178013501 Socket 1-1/4 x 3/8 $250.00 V V V V V 53258011200 Socket 1-1/4 x 3/8 $250.00 V V 53518012400 Socket 1-1/4 x 3/8 POA V V V 53468006200 Socket 1-1/4 x 3MT $250.00 V V 53178013601 Socket 1-1/4 x 5/16 $250.00 V 53258011100 Socket 1-1/4 x 5/16 POA V V 53518012500 Socket 1-1/4 x 5/16 POA V V V 53178013301 Socket 1-1/4 x 5/8 $250.00 V V V V V 53258011400 Socket 1-1/4 x 5/8 POA V V 53518012200 Socket 1-1/4 x 5/8 $250.00 V V V 53428002200 Socket 2 x 1 $410.00 V V V V V V V V V V V 51488002100 Socket 2 x 1/2 $410.00 V V V V V V 53428002601 Socket 2 x 1/2 $410.00 V 53428005100 Socket 2 x 1/2 POA V V V V V 53428002000 Socket 2 x 1-1/2 $410.00 V V V V V V V V V V V 53428002100 Socket 2 x 1-1/4 POA V V V V V V V V V V 53428001900 Socket 2 x 1-3/4 $410.00 V V V V V V V V V V V 53428003300 Socket 2 x 2MT POA V V V V V V V V V V V V 51488001800 Socket 2 x 3/4 $410.00 V V V V V 53428002401 Socket 2 x 3/4 $410.00 V 53428004900 Socket 2 x 3/4 $410.00 V V V V V 53428003200 Socket 2 x 3MT POA V V V V V V V V V V V V 53428003100 Socket 2 x 4MT POA V V V V V V V V V V V V 51488001900 Socket 2 x 5/8 $410.00 V V V V V 53428002501 Socket 2 x 5/8 $410.00 V 53428005000 Socket 2 x 5/8 POA V V V V V 51488001700 Socket 2 x 7/8 POA V V V V V 53428002301 Socket 2 x 7/8 $410.00 V 53428004800 Socket 2 x 7/8 POA V V V V 53538012100 Socket 3/4 x 1/2 $250.00 V 53538012200 Socket 3/4 x 3/8 $250.00 V 53538012300 Socket 3/4 x 5/16 $250.00 V MULTIPLEX 630/430 MULTIPLEX 6300

DESCRIPTION New QT8 8D QT8 12D QT15 8D Q515 8D-16 POSITION QT15 12D QT28 8D QT28 12D QT35 12D - 24Position QT350 12D-24Position QT40 12D-24 Position QT200C 12D QT250 12D QTN150 page 125 QTN200/250/ 300/350 QTN100/ 12 Position QTN400/450 SQT10 SQT15/ SQT18M SQT28/30 SQT100M/MS SQT200 12D SQT200/250M 16 Station SQT200/250MS SQT300M QTN100/150M &MS QTN200/250M&MS QTN300/350M&MS QTN400/450M DUAL TURN20 MULTIPLEX 610/410 MULTIPLEX 6100 MULTIPLEX625/620/420 MULTIPLEX 6200Y 12D MULTIPLEX 6200Y 16D 53538012000 Socket 3/4 x 5/8 $250.00 V TLH7606 SPECIAL 2 x 1 U DRILL SOCKET POA V V V TLH7604 SPECIAL 2 X 1-1/2 U DRILL SOCKET POA V V V TLH7605 SPECIAL 2 X 1-1/4 U DRILL SOCKET POA V V V TLH7607 SPECIAL 2 x 3/4 U DRILL SOCKET POA V V V TLH7307 Special 40mm x 1 $510.00 V V V V V V V V TLH7544 Special 40mm x 1 U Drill Socket $515.00 V V V V V V V TLH7306 Special 40mm x 1-1/4 U Drill Socket $510.00 V V V V V V V V TLH7545 Special 40mm x 1-1/4 U Drill Socket $515.00 V V V V V V V TLH7308 Special 40mm x 3/4 U Drill Socket $515.00 V V V V V V V V TLH7543 Special 40mm x 3/4 U Drill Socket $515.00 V V V V V V V MZK8537 Boring Bar Holder Split (2.000 ) $1,980.00 53478031300 Swiss Turn (Forward) $890.00 V 53478031401 Swiss Turn (Reverse) POA V 53428009000 Tandem Turn Holder POA V MZK7220B Tandem Turn Holder $1,980.00 V V MZK7220C Tandem Turn Holder POA V MZK8740 Tandem Turn Holder POA V 53108000600 Turning Block $110.00 V 53208000201 Turning Block $92.00 V V 53788002110 Turning Block $180.00 V 51488000800 Turning Holder $1,580.00 V V V 53468001000 Turret Cap/610-CAP40 $110.00 V V V 53478000800 Turret Cap $110.00 V V V V V V V V 53488001700 Turret Cap/630-CAP50 $210.00 V V 53518000600 Turret Cap/110-CAP40 I $110.00 V V V V V V V V 53818000701 Turret Cap Turret Cap $185.00 V V V V 0352SET0420 Turret Clamp Set $165.00 V 53418015200 U - Drill Holder (40mm) $960.00 V 53418013901 U - Drill Socket 1-1/2 x 20 POA V 53428002800 U - Drill Socket 2 x 32 POA V V V V V 53108010500 U Drill Holder $590.00 V 53258010600 U Drill Holder POA V 51488001000 U Drill Holder (2 ) $1,750.00 V V V 53428004701 U Drill Holder (2 ) POA V 51478001900 U Drill Holder (20mm) $700.00 V 53468005700 U Drill Holder (20mm)/ 610-UDH40* $980.00 V 51478001800 U Drill Holder (25mm) $700.00 V 53468005800 U Drill Holder (25mm)610-UDH40 $970.00 V 53178006300 U Drill Holder (32mm) POA V V 53518010500 U Drill Holder (32mm)/110-UDH40 POA V 53178005200 U Drill Holder (40mm) $980.00 V 53208015200 U Drill Holder (40mm) $890.00 V V 53308010500 U Drill Holder (40mm) $1,800.00 V V V 53418010600 U Drill Holder (40mm) $760.00 V V V 53478005700 U Drill Holder (40mm)/ 620-UDH40 $980.00 V 53488001801 U Drill Holder (40mm)/ 630-UDH50 $1,820.00 V 53618010500 U Drill Holder (40mm)/ 115-UDH40 $860.00 V 53818010500 U Drill Holder (40mm)/ 128-UDH50 POA V MZK8894 U Drill Holder (1.500 ) $1,850.00 MZK8893 U Drill Holder (2.000 ) $1,850.00 53428002900 U -Drill Socket 2 x 25 POA V V V V V 53518003200 U Drill Socket 32 x 25 $420.00 V 53208010100 U-Drill Holder $960.00 V V V 53418013801 U-Drill Socket 1-1/2 x 25 $440.00 V 53418013701 U-Drill Socket 1-1/2 x 32 POA V 53428003000 U-Drill Socket 2 x 20 POA V V V V V 53428002700 U-Drill Socket 2 x 40 $500.00 V V V V V 53258001700 U-Drill Socket 32 x 20 $360.00 V V V 53518003300 U-Drill Socket 32 x 20 POA V 53258001800 U-Drill Socket 32 x 25 POA V V V V 53208001000 U-Drill Socket 40 x 20 POA V V V V V V V V V 53418003601 U-Drill Socket 40 x 20 $420.00 V V V V V V V V 53208001100 U-Drill Socket 40 x 25 $410.00 V V V V V V V V V 53418003501 U-Drill Socket 40 x 25 POA V V V V V V V V 53208001200 U-Drill Socket 40 x 32 $410.00 V V V V V V V V V 53418003401 U-Drill Socket 40 x 32 $420.00 V V V V V V V V 53568006101 Z Offset Turning Holder $1,780.00 V 53578005700 Z Offset U Drill Holder (40mm)/ 620-UDH40* $620.00 V Mazak Boring Sleeves (Socket) D d A (mm) B(mm) MK-E1.25-1/4 1-1/2 1/4 58 12.5 $66.00 MK-E1.25-3/8 1-1/2 3/8 58 12.5 $66.00 MK-E1.25-1/2 1-1/2 1/2 58 12.5 $66.00 MK-E1.25-5/8 1-1/2 5/8 58 12.5 $66.00 MK-E1.25-3/4 1-1/2 3/4 58 12.5 $66.00 MK-E1.25-1 1-1/2 1 58 12 $66.00 Tool Holder Mazak MULTIPLEX 630/430 MULTIPLEX 6300 D d A (mm) B(mm) MK-E1.5-1/4 1-1/2 1/4 58 12.5 $70.00 MK-E1.5-3/8 1-1/2 3/8 58 12.5 $70.00 MK-E1.5-1/2 1-1/2 1/2 58 12.5 $70.00 MK-E1.5-5/8 1-1/2 5/8 58 12.5 $70.00 MK-E1.5-3/4 1-1/2 3/4 58 12.5 $70.00 MK-E1.5-1 1-1/2 1 58 12 $70.00 MK-E1.5-1.25 1-1/2 1-1/4 58 12 $70.00

Tool Holder OKUMA VDI Holder For For OKUMA (Angular Head ) OKUMA D X S MAX RPM L200M OK-DA3020B 35 1-13 ER20 L300M OK-DA4025B 42 1-16 ER25 Dimensions ( mm ) A B C E F G M 35 4000 +90 0 64 59 54 32 27 67 $5,500.00 42 4000 +90 0 76 65 65 38 29 70 $5,870.00 OKUMA D X S MAX RPM LT200-MY OK-LT-DA3020B 30 1-13 ER20 Dimensions ( mm ) A B C G M 35 4000 +90 0 74 59 27 67 $CALL For OKUMA (DA Type) For OKUMA (Axial Milling and Drilling ) OKUMA Dimensions (mm / inch) Tool System Collet DIN-6499 A C D LB200M LB200MY LB200M-DA30 LB200MY-DA30 78 3.07 LT10MY LT10MY-DA30 74.5 2.93 LT15MY LT15MY-DA40 71 2.80 LT25MY LT25MY-DA40 77.5 3.05 LU15M LU25M LB300M LB400M LB35IIM LU35M LU15M-DA40 LU25M-DA40 LB300M-DA40 LB400M-DA40 LB35IIM-DA50 LU35M-DA50 95 3.74 100 3.94 144.3 5.68 LB45IIM LB45IIM-DA60 144.3 5.68 68 2.68 68 2.68 79 3.11 79 3.11 79 3.11 79 3.11 88 3.46 104 4.09 68 2.68 68 2.68 78 3.07 78 3.07 78 3.07 78 3.07 84 3.31 106 4.17 ER-25 1-16mm $1,410.00 ER-25 1-16mm $1,410.00 ER-32 2-20mm ER-32 1/8-3/4 ER-32 2-20mm ER-32 1/8-3/4 ER-32 2-20mm ER-32 1/8-3/4 ER-32 2-20mm ER-32 1/8-3/4 ER-40 3-26mm ER-40 1/8-1 ER-50 10-34mm ER-50 3/8-1 1/4 $1,590.00 $1,590.00 $1,590.00 $1,590.00 $1,910.00 $2,590.00 OKUMA D X S MAX RPM L200M OK-DA30ER20 30 1-13 ER20 L200M OK-DA30ER25 30 1-16 ER25 L300M OK-DA40ER32 40 2-20 ER32 OKUMA D X S MAX RPM LT200-MY OK-LT- DA30ER25 30 1-16 ER25 Dimensions ( mm ) A B C 35 6000 84.5 57 68 $1,300.00 42 6000 86 55 68 $1,300.00 50 6000 106 74 86 $1,450.00 Dimensions ( mm ) A B C G 42 6000 88 31 74 70 $CALL page 126 OKUMA D X S MAX RPM LU400M OK-LU400M- DA40-ER40 40 3-26 ER40 Dimensions ( mm ) A B C D 63 6000 117 41 40 60 $CALL

Tool Holder OKUMA OKUMA D X S MAX RPM LT15M/ LT300/ LB300MYW OK-MYW-DA4032A 40 2-20 ER32 Dimensions ( mm ) A B C G 38 6000 74.5 56 84 90 $CALL For OKUMA (DF Type) DFRL DFRR OKUMA Dimensions (mm / inch) Tool System Collet DIN-6499 A B D LB200M LB200M-DFRL30 98 3.86 LT10MY LT10MY-DFRL30 LT10MY-DFRR30 85.5 3.33 LU15M LU15M-DFRL40 70 2.76 LU25M LU25M-DFRL40 70 2.76 LT15MY LT25MY LT15MY-DFRL40 LT15MY-DFRR40 LT25MY-DFRL40 LT25MY-DFRR40 90 3.54 95 3.74 LB35IIM LB35IIM-DFRL50 70 2.76 LU35M LU35M-DFRR50 115 4.53 LB45IIM LB45IIM-DFRL60 98 3.86 36.4 1.43 72.5 2.85 70 2.76 70 2.76 74 2.91 110 4.33 70 2.76 70 2.76 110 4.33 70 2.76 70 2.76 80 3.15 80 3.15 80 3.15 80 3.15 96 3.78 96 3.78 96 3.78 ER-20 1-13mm ER-20 1/8-1/2 ER-20 1-13mm ER-20 1/8-1/2 ER-32 2-20mm ER-32 1/8-3/4 ER-32 2-20mm ER-32 1/8-3/4 ER-32 2-20mm ER-32 1/8-3/4 ER-32 2-20mm ER-32 1/8-3/4 ER-40 3-26mm ER-40 1/8-1 ER-40 3-26mm ER-40 1/8-1 ER-50 10-34mm ER-50 3/8-1 1/4 $1,940.00 $1,940.00 $2,130.00 $2,130.00 $2,130.00 $2,130.00 $2,480.00 $2,480.00 $3,140.00 For OKUMA (Radial Milling and Drilling ) OKUMA D X S MAX RPM L300M OK-FL403270 40 2-20 ER32 Dimensions ( mm ) A B C G M 50 4000 106 80 75 26 70 $2,330.00 OKUMA D X S MAX RPM LT200-MY OK-LT-FR302090 30 1-13 ER20 LT200-MY OK-LT-FR302590 30 2-16 OK-LT-FL302590 ER25 LT200-MY OK-LT-FR3025100 30 2-16 OK-LT-FL3025100 ER25 Dimensions ( mm ) A B C G M 35 4000 123 70 79.5 30 90 $CALL 42 4000 123 70 79.5 30 90 $CALL 42 4000 130 70 79.5 30 100 $CALL page 127

Tool Holder OKUMA OKUMA D X S MAX RPM LT15M/ LT300/ LB300MYW OK-MYW-FL4032A90 40 2-20 ER32 Dimensions ( mm ) A B C G M 38 4000 130 90 77 18 90 $CALL For OKUMA (DB Type) OKUMA D X S MAX RPM L200M OK-BL302069 30 1-13 ER20 L200M OK-BL302569 30 1-16 ER25 L300M OK-BL403290 40 2-20 ER32 Dimensions ( mm ) A B C G M 35 5000 95 64 43 30 69 $2,270.00 42 5000 95 64 42.5 30 69 $2,270.00 50 5000 124 80 42.5 29 90 $2,500.00 DBRL DBRR OKUMA Dimensions Tool System Collet DIN-6499 A B D LB300M LB300M-DBRL40 87 3.43 70 2.76 80 3.15 ER-32 2-20mm ER-32 1/8-3/4 $3,100.00 LB400M LB400M-DBRL40 87 3.43 70 2.76 80 3.15 ER-32 2-20mm ER-32 1/8-3/4 $3,100.00 LB35IIM LB35IIM-DBRL50 51 2.01 115 4.53 96 3.78 ER-40 3-26mm ER-40 1/8-1 $3,580.00 LU35M LU35M-DBRL50 51 2.01 115 4.53 96 3.78 ER-40 3-26mm ER-40 1/8-1 $3,580.00 For OKUMA (Offset Type) OKUMA Dimensions ( mm / inch) Tool System Collet DIN-6499 A B C D LU15M 1 LU15M-ASB40-100 14 0.55 100 3.93 40 1.57 80 3.15 ER-20 1-13mm ER-20 1/8-1/2 $2,930.00 LU15M 2 LU15M-ASF40-100 124 4.88 100 3.93 40 1.57 80 3.15 ER-20 1-13mm ER-20 1/8-1/2 $2,930.00 LU15M 3 LU15M-ASFB40-100 29 1.14 100 3.93 40 1.57 80 3.15 ER-32 2-20mm ER-40 1/8-1 $4,070.00 OKUMA D X S MAX RPM LT200-MY OK-LT-FL302590D 30 1-16 ER25 Dimensions ( mm ) A B C G M 42 4000 123 70 84 33.5 90 $CALL page 128

VDI Offset Driven Tool Face/Back Drill/Endmill Unit S Tool Holder OKUMA 2 Face Drill/Endmill Unit S 3 Back Drill/Endmill Unit S Okuma Type ASFB40100 $4,070.00 ASF40-100 $2,930.00 ASB40-100 $2,930.00 Face Tapping Unit S 7 Face/Back VDI Tool Suitable for Okuma turning center LR15MW 1 TASF40100 $3,150.00 OK-ASFB40 $4,070.00 Back Tapping Unit S 6 Face VDI Tool Suitable for Okuma turning center LR15MW 4 TASB40100 $3,150.00 ID Toolholder Base (AS) OK-ASF40 $2,930.00 ID Toolholder Base (BS) 8 VDI Tool Holder Suitable for Okuma turning center LB45II OK-ASF60 $4,600.00 ID Toolholder Base (CS) * * * *Inch sizes available ID40-AS $750.00 * *Inch sizes available ID40-BS $1020.00 *Inch sizes available ID40-CS $1100.00 5 OD Toolholder Base (BS) OD Toolholder Base (ES) OD Toolholder Base (CS) OD Toolholder Base (FS) Inch sizes available OD40-BS $950.00 Inch sizes available OD40-ES $980.00 Inch sizes available OD40-CS $970.00 *Inch sizes available * OD40-FS $1080.00 page 129

Tool Holder OKUMA For OKUMA (Boring Bar Holder) OKUMA D X Dimensions ( mm ) A B C E LB200 OK-4162270790 30 32mm 70 56.5 30.5 30.5 $180.00 L300M OK-4163278510 40 1.5 75 65 34.5 34.5 $200.00 OK-4163272310 40mm 60 OKUMA D X Dimensions ( mm ) A B C E LB200 OK-4167261010 30 1.25 70 60 30.5 30.5 $180.00 OK-4167260410 32MM L300M OK-4163276911 40 1.5 75 65 34.5 34.5 $200.00 OK-4163270412 40MM For OKUMA (Facing Holder) For OKUMA (Turning Holder ) OKUMA D X Dimensions ( mm ) A B C LB200 OK-A4167260710 30 0.75 42 0.75 25 $180.00 OK-A4167260110 20MM 20MM LB200 OK-B4167260810 30 0.75 42 0.75 55 $180.00 L300M GENOS300 L300M GENOS300 OK-B4167260210 20MM 20MM OK-A4163276611 40 1 47 1 30 $220.00 OK-A4163270111 25MM 25MM OK-B4163276711 40 1 47 1 65 $250.00 OK-B4163270211 25MM 25MM OKUMA D X Dimensions ( mm ) A B C LB200 OK-C4167260910 30 0.75 65 0.75 45 $180.00 OK-C4167260310 20MM 20MM L300M GENOS 300 OK-C4163276811 40 1 72 1 50 $250.00 OK-C4163270311 25MM 25MM OKUMA D X Dimensions ( mm ) A B C E M LB200 OK-4167-2611-10 30 32 84 75 65 8 60 $CALL L300M OK-4176-2566-10 40 1.5 135 94 65-10 110 $CALL OK-4163-2707-10 40MM OKUMA D X Dimensions ( mm ) A B C E M LB200 OK-4167-2612-10 30 25 92 75 38 8 74 $CALL page 130

Tool Holder OKUMA For OKUMA (Boring Bar Holder ) OKUMA D X Dimensions ( mm ) LT15M/ LT300 LB300-MYW A B C E F M OK-LT-IDI-H40-105 40 40 135 86 70 50 50 105 $CALL OKUMA D X Dimensions ( mm ) LT15M/ LT300 LB300-MYW A B C E F M OK-LT-IDI-H40-105 40 40 135 86 70 50 50 105 $CALL OK-LT-IDII-H40-105 13 OKUMA D X Dimensions ( mm ) LT15M/ LT300 LB300-MYW A B C E F OK-LT-IDI 40 25 110 25 97 100 92 $CALL OKUMA D X Dimensions ( mm ) A B C E F M LT200-MY OK-LT-II-H31.75-100 30 1.25 125 70 60 18 44 100 $CALL OK-LT-II-H32-100 32MM page 131

Tool Holder OKUMA OKUMA D X Dimensions ( mm ) A B C E F M LT200-MY OK-LT-I-H31.75-100L 30 1.25 125 70 60 80 40 100 $CALL OK-LT-I-H32-100L 32MM For OKUMA (Facing Holder ) OKUMA D X Dimensions ( mm ) A B C E F LT200-MY OK-LT-OD-0.75 30 0.75 95 0.75 80 40 80 $CALL OK-LT-OD-20 20MM 20MM OKUMA D X Dimensions ( mm ) A B C E F X LT200-MY OK-LT-OD-I-D-20 30 20 75 20 80 40 80 20 $CALL OKUMA D X Dimensions ( mm ) A B C E F X LT200-MY OK-LT-OD-I-S-20 30 20 75 20 80 40 80 20 $CALL For OKUMA Double Boring Bar and Single Turning Holder OKUMA Dimensions ( mm ) A B C E F G X1 X2 M1 M2 L250 OK-250-B20XB25-46 65 159 102 77 40 20 25 20 18 46.2 $CALL page 132

For OKUMA Double Boring Bar Tool Holder OKUMA OKUMA Dimensions ( mm ) A B C E X M1 M2 LB3000EX OK-EX-B25X2-50 117 116 96 100 25 95 50 $CALL OKUMA Dimensions ( mm ) A B C E X M1 M2 L270E OK-L270E-B16X2-58 73 83 90 77 16 58 25 $CALL OK-L270E-B20X2-58 20 For OKUMA Boring Bar OKUMA Dimensions ( mm ) A B C E X M L270E OK-L270E-B40-40 73 83 90 77 40 40 $CALL OKUMA Dimensions ( mm ) D A B C E X M LB300 ID40-BS-B38.1-100 40 130 80 130 56 1.5 100 $CALL ID40-BS-B40-100 40MM For OKUMA Facing Holder OKUMA Dimensions ( mm ) D A B C E X M LB300 OD40-CS-F25.4-133 40 133 90 78 30 1 1 $CALL OD40-CS-F25-133 25MM 25MM OKUMA Dimensions ( mm ) D A B C E X M LB300 OD40-BS-C25-100 40 100 90 70 5.5 25 25 $CALL OKUMA Dimensions ( mm ) D A B C X M LB300 OD40-BS-C25-100L 40 100 90 45 25 25 $CALL page 133

Tool Holder OKUMA For OKUMA Turning Holder OKUMA D X Dimensions ( mm ) A B C E M LB300 OD40-ES-C25X2 30 25 105 90 85.5 0.5 25 $CALL For OKUMA Boring Bar Holder OKUMA D X Dimensions ( mm ) A B C E M LB300 ID40-AS-B38.1-40 40 1.5 75 75 80 110 40 $CALL ID40-AS-B40-40 40MM OKUMA D Dimensions ( mm ) A B C E F M X LT2000EX-16D OK-ID-H32-85-S 55.4 122 86 112 68 62 85 32 $CALL LT2000EX-12D OK-LT2000-60.4-B32-110-S 60.4 125 95 138 68 62 110 32 $CALL OKUMA D Dimensions ( mm ) A B C E M X LT2000EX-16D OK-ID-H32-85 55.4 136 86 112 68 85 32 $CALL LT2000EX-12D OK-LT2000-60.4-B32-110 60.4 136 95 138 68 110 32 $CALL OKUMA D Dimensions ( mm ) A B C E F G M X LT2000EX-16D OK-ID-H32-85-SS 55.4 116 86 112 58 60 30 85 32 $CALL For OKUMA Turning Holder OKUMA D Dimensions ( mm ) A B C E M X LT2000EX-16D OK-OD-I-S-20 55.4 121 86 85 71 20 20 $CALL LT2000EX-16D OK-OD-I-S-20-65 55.4 121 86 65 71 20 20 $CALL LT2000EX-12D OK-LT2000-60.4-C25-70 60.4 121 95 70 71 20 25 $CALL page 134

For OKUMA Double Side Twin TurningHolder Tool Holder OKUMA OKUMA D Dimensions ( mm ) A B C E M X LT2000EX-16D OK-OD-I-D-20X2 55.4 142 86 85 71 20 20 $CALL LT2000EX-12D OK-LT2000-60.4-C25C2-70 60.4 142 95 70 71 20 25 $CALL For OKUMA Facing Holder OKUMA D Dimensions ( mm ) A B C E M X LT2000EX-16D OK-OD-I-20-85 55.4 130 86 85 65 20 20 $CALL For OKUMA Double Side Twin Facing Holder OKUMA D Dimensions ( mm ) A B C E F M X LT2000EX-16D OK-OD-II-20X2 55.4 130 86 85 65 130 20 20 $CALL LT2000EX-12D OK-LT2000-60.4-F25X2-105 60.4 130 95 105 65 130 20 25 $CALL For OKUMA Turning Holder OKUMA D Dimensions ( mm ) A B C E F X H M LT2000EX-16D OK-LT2000EX-R25-67 55.4 51.5 82 83.5 43 43 32 25 67 $CALL For OKUMA Plug OKUMA D Dimensions ( mm ) A B E F LT2000EX-16D OK-LT2000-16D-PLUG 55.4 38 15 100 82 $CALL LT2000EX-12D OK-LT2000-12D-PLUG 60.4 38 15 104 95 $CALL page 135

Tool Holder MURATEC VDI Tool Holder For MURATEC RADIAL MILLING AND DRILLLING HEAD MURATEC D X S MAX RPM MT20 FR40M1809110 40 2-20 ER32 Dimensions ( mm ) A B C G M 50 4000 148 85 77 28 110 $2,570.00 MURATEC D X S MAX RPM MT20 BR40M1809110 40 2-20 ER32 Dimensions ( mm ) A B C G E M 50 4000 146 80 44 32 97 110 $3,300.00 MURATEC D X S MAX RPM MT6 MT6- MDF4025100 40 1-16 ER25 Dimensions ( mm ) A B C G M 42 4000 132 73 85 31 100 $CALL MURATEC D X S MAX RPM MT6 MT6- MDA40ER25 40 1-16 ER25 Dimensions ( mm ) A B C G 42 6000 106 73 102 31 $CALL ANGUAL HEAD MURATEC D X S MAX RPM MT20 MT25 MT20- DA4025B 40 1-16 ER25 Dimensions ( mm ) A B C G E M 42 4000 +90 0 76 65 29 65 70 $CALL page 136

VDI Tool Holder For MURATEC Tool Holder MURATEC AXIAL MILLING AND DRILLLING HEAD MURATEC D X S MAX RPM MT20 DA40M180932 40 2-20 ER32 Dimensions ( mm ) A B C 50 6000 91 55 86 $1,100.00 MURATEC D X S MAX RPM MT25 MT25- DA403242 40 2-20 ER32 Dimensions ( mm ) A B C G M 50 5000 80 92 121 36 42 $CALL DOUBLE BORING BAR HOLDER MURATEC D D1 L1 L2 L3 L4 L5 L6 MT20 MT25 MT20-MU40- B40-110 MT25-MU40- B40-140 40 40 110 25 55 30 50 85 $650.00 40 40 140 25 55 30 40 86 TURNING HOLDER MURATEC D L1 L2 L3 L4 L5 L6 L7 MT20 MT20-MU40-25T 40 50 25 25 85 75 78 31.5 $270.00 MT25 MT25-MU40-25T 40 50 25 25 85 75 78 31.5 page 137

Tool Holder MURATEC RADIAL MILLING AND DRILLLING HEAD OFFSET (unit: mm) Internal Coolant MURATEC D X MT20 SH-BR40- M-1809-32-100 40 2-20 ER32 S MAX RPM A B C E G M 50 5000 147 80 43 77.5 33 110 $CALL RADIAL MILLING AND DRILLLING HEAD HEAVY DUTY (unit: mm) Internal Coolant MURATEC D X MT20 TA-FR40- M-1809-32-110 40 2-20 ER32 S MAX RPM A B C E G M 50 4000 150 85 103 52.5 37.5 110 $CALL AXIAL MILLING AND DRILLLING QUICK-CHANGE (unit: mm) MURATEC D X MT20 DA40-M-1809- ER25-QF 40 1-16 ER25 S MAX RPM A B C E 42 6000 109.5 53 78 78 $CALL RAIDAL MILLING AND DRILLLING QUICK-CHANGE (unit: mm) MURATEC D X MT20 BR40- M-1809-25-110 40 1-16 ER25 S MAX RPM A B C E G M 42 5000 147 80 69 93 56 110 $CALL AXIAL MILLING AND DRILLLING (unit: mm) MURATEC D X MT20-MW MW40-DA35- ER16 40 1-10 ER16 S MAX RPM A B C E F G 30 6000 75.5 20 80 15 41 29 $CALL RAIDAL MILLING AND DRILLLING (unit: mm) MURATEC D X MT20-MW MW40-DA35- ER16 40 1-10 ER16 S MAX RPM A B C E G M 30 4000 88 80 65 45 26.5 60 $CALL page 138

VDI Tool Holder For NAKAMURA TOME AXIAL MILLING AND DRILLLING HEAD AXIAL MILLING AND DRILLLING HEAD (unit: mm) NAKAMURA D X WT-100 DA44NAER20 44 2-20 ER32 WT-150 DA55NAER25 55 1-16 ER25 WT-150 DA55NAER32 55 2-20 ER32 WT-300 DA65NAER32 65 2-20 ER32 (unit: mm) Tool Holder NAKAMURA TOME S MAX RPM A B C E 35 6000 50 35 75 60 $1,100.00 42 6000 50 35 84 79 $1,250.00 50 6000 62 48 84 79 50 6000 56.5 34 100 96 NAKAMURA D X WT-100 DA44NA-16A-29/1 44 1-13 ER20 WT-150 DA55NA-20A-45/I 44 1-13 ER20 S MAX RPM I A B C E M 35 4000 1:2 48 75 65 38.4 29 35 4000 1:2 48 75 65 38.4 29 RADIAL MILLING AND DRILLLING HEAD (unit: mm) NAKAMURA D X WT-100 DF44NA2060 44 1-13 ER20 WT-150 DF55NA2555 55 1-16 ER25 WT-300 DF65NA3265 65 2-20 ER32 S MAX RPM A B C G M 35 4000 86 75 78.5 25 60 $2,420.00 42 4000 90 84 88 30 55 $2,420.00 50 4000 108 96 96 33 65 Double Speed is also available upon request. (unit: mm) Internal Coolant NAKAMURA D X WT-100 DF44-20-60K 44 1-13 ER20 WT-100 DF44NA-20-75K 44 1-13 ER20 WT-150 DF55NA-25-55K 55 1-16 ER25 S MAX RPM A B C F G M 35 5000 92 75 82.5 68 29 60 $CALL 35 5000 107 75 84 68 30 75 $CALL 42 5000 90 84 88 80 30 55 $CALL (unit: mm) NAKAMURA D X WT-150 DF55NA2555D 55 1-16 ER25 WT-300 DF65NA3265D 65 2-20 ER32 S MAX RPM A B C F G M 42 4000 90 84 91 91 31 55 $CALL 50 4000 108 96 96 96 33 65 $CALL (unit: mm) 4000 RPM, A=+90 0 Machine D X WT-100 DA44NA- 16BAC 44 1-10 ER16 S B C E F G M 19.6 72 43 53 45 12 60 $CALL page 139

Tool Holder NAKAMURA TOME (unit: mm) 3000 RPM Machine D X DIN6358 S A B C E G WT-100 DA44NA-22C 44 22 40 67 45 75 60 31 $CALL WT-150 DA55NA-22C 55 22 40 64.5 50.5 84 79 31 $CALL (unit: mm) 4000 RPM Machine D X WT-100 WT-100 DF44NA- 20-11-60D DF44NA- 20-11-70D 44 1st ER20 2nd ER11 44 1st ER20 2nd ER11 S A B C C1 E E1 M 35 19 35 19 92 75 82.5 63.5 53.5 63.5 60 $CALL 102 75 82.5 63.5 53.5 63.5 70 $CALL (unit: mm) 6000 RPM Machine D X DIN6358 WT-100 CW-DA44NA-ER16A 44 1-10 ER16 S A B C E 40 78 16 75 60 $CALL (unit: mm) 3000 RPM Machine D X S A B C F G M WT-100 DF44NA-25.4C-60 44 25.4 35 92 75 82 48.5 28.5 60 $CALL (unit: mm) 6000 RPM Machine D X SUPER-WT150 SUPER-WT150 SUPER-WY-250L SP-WT150-DA- 65NA-ER32-S SP-WT150-DA- 65NA-ER32-L SP-WY250-DA- 65NA-ER32 65 2-20 ER32 65 2-20 ER32 65 2-20 ER32 S A B C E 50 56 32 91 91 $CALL 50 85 61 91 91 $CALL 50 56 32 91 91 $CALL (unit: mm) 6000 RPM, Internal Coolant Machine D X SUPER-WY-250L SP-WY250-DA- 65NA-ER32K 65 2-20 ER32 S A B C E 50 75.5 39 91 91 $CALL AxialShell End Milling Cutters (unit: mm) 3000 RPM Machine D X SUPER- WY-250L SP-WY-250L- DA65NA-22C S A B C E G 65 22 48 54.5 39.5 91 91 18 $CALL page 140

Radial Mill and Drilling Head Tool Holder NAKAMURA TOME (unit: mm) 5000 RPM Machine D X SUPER- WT-150 SUPER- WT-150 SUPER- WY-250L SUPER- WY-250L SP-WT-150-DF- 65NA-25-55-S SP-WT-150-DF- 65NA-32-55-S SP-WY-250L- DF65NA-32-55 SP-WY-250L- DF65NA-32-55-T 65 1-16 ER25 65 2-20 ER32 65 2-20 ER32 65 2-20 ER32 S A B C F G M 42 96 91 93 61 33 55 $CALL 50 96 91 93 61 33 55 $CALL 50 96 91 93 61 33 55 $CALL 50 96 91 95.5 64 35.5 55 $CALL (unit: mm) 5000 RPM, Internal Coolant Machine D X SUPER- WY-250L SP-WY-250L- DF65NA-32-55K 65 2-20 ER32 S A B C F G M 50 96 91 93 81 33 55 $CALL (unit: mm) 4000 RPM Machine D X SUPER- WY-250L SP-WY-250L- DF65NA-32-55-T 65 1st ER20 2nd ER32 S A B C C1 E E1 35 50 M 96 91 84 93 50 55 $CALL (unit: mm) 4000 RPM Machine D X SUPER- WY-250L SP-WY-250L- DF65NA-32-55-T 65 2-20 ER32 S A B C F G M 50 96 91 97.5 97.5 37.5 55 $CALL (unit: mm) 3000 RPM Machine D X SUPER- WT-150 S A B C G M DF65NA-22C-55-S 65 22 42 96 91 73 31 55 $CALL page 141

Tool Holder NAKAMURA TOME Angular Head (unit: mm) 4000 RPM, A=+90 0 Machine D X S B C E F G M SUPER- WT-150 SP-DA65NA- 16BAC 65 1-10 ER16 19.5 91 43 47 47 12 66 $CALL (unit: mm) 4000 RPM, A=+90 0 Machine D X S B C E F G M SUPER- WT-150 SP-DA65NA- 16BAC 65 1-13 ER20 35 91 59 53 47 28 66 $CALL Quick Change Clamping System (unit: mm) 6000 RPM Machine D X S A B C E SUPER- WT-150 SP-WT150-DA- 65NA-ER25-S-QF 65 1-16 ER25 42 77.5 54 91 91 $CALL (unit: mm) 6000 RPM Machine D X S A B C F G M SUPER- WT-150 SP-WT150-DF- 65NA-25-55-S-QF 65 1-16 ER25 42 96 91 115 61 55 55 $CALL Quick Change Clamping System (unit: mm) 5000 RPM Machine D X TW8 TW8-DF42NA-16-60 42 1-10 ER16 S A B C F G M 30 87 75 76 43 31 60 $CALL Quick Change Clamping System (unit: mm) 6000 RPM Machine D X TW8 TW8-DA42NA-ER16 42 1-10 ER16 S A B C E 30 46.5 35.5 75 60 $CALL Turning Holder (unit: mm) Machine X A B C E F TW8/ WT-100 WT100-C20-62 20 87 62.5 39.5 22 20 $CALL page 142

Boring Bar Holder Tool Holder NAKAMURA TOME (unit: mm) External Coolant Machine X A B C M WT-150 WT150-B25-75 25 95 85 83 75 $CALL TW8/ WT-100 TW150-B25-60 25 77.5 62 79 60 $CALL (unit: mm) Internal Coolant Machine X A B C M WT-150 WT150-B25-75-A 25 95 85 83 75 $CALL TW8/ WT-100 TW150-B25-60-A 25 77.5 62 79 60 $CALL (unit: mm) External Coolant Machine X A B C M WT-150 WT150-B32-70 32 97 80 83 70 $CALL TW8/ WT-100 TW150-B32-60 32 86 62 79 60 $CALL (unit: mm) Internal Coolant Machine X A B C M WT-150 WT150-B32-70-A 32 97 80 83 70 $CALL TW8/ WT-100 TW150-B32-60-A 32 86 62 79 60 $CALL (unit: mm) External Coolant Machine X A B C M M1 WT-150 WT150-Z7418 25 102 80 83 47.5 82.5 $CALL (unit: mm) External Coolant Machine X A B C G E F WT150 R1432-R20-R 20 101 80 41.5-22 20 $CALL Cutting Holder (unit: mm) External Coolant Machine X A B C G E F WT-100 WT100-R21430-R20 20 98 66 39.5-21 20 $CALL WT150 WT150-R1431-R20 20 101 80 41.5-22 20 $CALL WT150 WT150-R1431-R25 25 106 80 46.5 41.5 26 25 $CALL WT300 WT300-W2431 25 135 93 48-27 25 $CALL page 143

Tool Holder NAKAMURA TOME Boring Bar Holder Cutting Holder (unit: mm) External Coolant Machine X A B C M SP-WT-150-B31.75-70 IN 1.25 3.82 3.54 3.54 2.76 $CALL SUPER-WT150 SP-WT-150-B32-70 MM 32 97 90 90 70 $CALL SP-WT-150-B38.1-75 IN 1.5 4.21 3.62 3.58 2.95 $CALL SP-WT-150-B38.1-75 MM 40 107 92 91 75 $CALL (unit: mm) Internal Coolant Machine X A B C M SP-WT-150-B31.75-70-A IN 1.25 3.82 3.54 3.54 2.76 $CALL SUPER-WT150 SP-WT-150-B32-70-A MM 32 97 90 90 70 $CALL SP-WT-150-B38.1-75-A IN 1.5 4.21 3.62 3.58 2.95 $CALL SP-WT-150-B38.1-75-A MM 40 107 92 91 75 $CALL (unit: mm) Machine A B C E F X SUPER- WT-150 SP-WT150-R25 116 90 45.5 27 25 25 $CALL Turning Holder (unit: mm) Machine A B C E F X SUPER- WY-250L SP-WY-250L- C25-65 65 116 45.5 28 25 25 $CALL Boring Bar Holder (unit: mm) Machine A B C M X SUPER- WY-250L SP-WY-250L- B25-75 102 90 90 75 25 $CALL (unit: mm) Machine A B C M X SUPER- WY-250L SP-WY-250L- B32-70 95 90 90 70 32 $CALL page 144

Collet Chuck for NAKAMURA Tool Holder NAKAMURA TOME MURATEC X A B C E F WT-100 R21430 25 98 66 39.5 21 20 WT-150 R1432 25 112 93 44 26 25 WT-300 W2431 25 135 93 48 27 25 Collet Chuck for NAKAMURA Collet d1 d2 B1 H1 L1 L2 L3 NK20ER25 ER25 30 42 50 45.5 69 22 81 $290.00 NK30ER32 ER32 30 50 50 45.5 69 22 81 $290.00 NK30ER40 ER40 30 63 50 45.5 69 22 81 $290.00 NK40ER25 ER25 40 42 50 45.5 69 22 81 $320.00 NK40ER32 ER32 40 50 50 45.5 69 22 81 $320.00 NK40ER40 ER40 40 63 50 45.5 69 22 81 $320.00 NK50ER40 ER40 50 63 50 45.5 69 30 81 $340.00 Morse Taper Adaptor for NAKAMURA d1 d2 B1 H1 H2 L1 L2 NK50MT3 50 MT#3 50.6 35 49 46 30 $325.00 NK50MT4 50 MT#4 50.6 35 49 46 30 $325.00 Boring Bar Holder for NAKAMURA d1 d2 d3 B1 H1 L1 L2 L3 NK3010 30 10 3/8 85-45.5 90 30 76 $210.00 NK3012 30 12 1/2 85-45.5 90 30 76 $210.00 NK3020 30 20 3/4 95 50 47.6 90 30 76 $210.00 NK3025 30 25 1 95 50 47.6 90 30 76 $210.00 NK3032 30 32 1-1/4 95 50 47.6 90 30 76 $210.00 NK3040 30 40 1-1/2 95 50 47.6 90 30 76 $210.00 NK3045 30 45 1-3/4 95 50 47.6 90 30 76 $210.00 NK3050 30 50 2 95 50 47.6 90 30 76 $210.00 NK4010 40 10 3/8 85-45.5 90 30 76 $250.00 NK4012 40 12 1/2 85-45.5 90 30 76 $250.00 NK4020 40 20 3/4 95 50 47.6 90 30 76 $240.00 NK4025 40 25 1 95 50 47.6 90 30 76 $240.00 NK4032 40 32 1-1/4 95 50 47.6 90 30 76 $240.00 NK4040 40 40 1-1/2 95 50 47.6 90 30 76 $240.00 NK4045 40 45 1-3/4 95 50 47.6 90 30 76 $240.00 NK4050 40 50 2 95 50 47.6 90 30 76 $240.00 NK5010 50 10 3/8 85-45.5 90 30 76 $300.00 NK5012 50 12 1/2 85-45.5 90 30 76 $300.00 NK5020 50 20 3/4 95 50 47.6 90 30 76 $300.00 NK5025 50 25 1 95 50 47.6 90 30 76 $300.00 NK5032 50 32 1-1/4 95 50 47.6 90 30 76 $300.00 NK5040 50 40 1-1/2 95 50 47.6 90 30 76 $300.00 NK5045 50 45 1-3/4 95 50 47.6 90 30 76 $300.00 NK5050 50 50 2 95 50 47.6 90 30 76 $300.00 page 145

Tool Holder TAKAMAZ VDI Tool Holder For TAKAMAZ AXIAL MILLING AND DRILLLING HEAD DOUBLE COLLETS, Y OFFSET (unit: mm) TAKAMAZ D X XY-120 TADA301624D 30 1-10 ER16 S MAX RPM A B C E M 30 5000 75.5 25 100 84 24 $1,610.00 AXIAL MILLING AND DRILLLING HEAD (unit: mm) TAKAMAZ D X XY-120 TADA30ER20 30 1-13 ER20 XY-120 TADA30ER25 30 1-16 ER25 S MAX RPM A B C E 35 6000 71.5 28 100 84 $1,100.00 42 6000 74.5 31 100 84 RADIAL MILLING AND DRILLLING HEAD (unit: mm) TAKAMAZ D X XY-120 TADF302075 30 1-13 ER20 S MAX RPM A B C G M 35 4000 105 76.6 82.5 27 75 $2,570.00 RADIAL MILLING AND DRILLLING HEAD/ DOUBLE HEAD (unit: mm) TAKA- MAZ D X S MAX RPM A B C E G M XY-120 TADF302075D 30 1-13 ER20 35 4000 105 76.6 82.5 81.2 27 75 $3,300.00 RADIAL MILLING AND DRILLLING HEAD (unit: mm) TAKAMAZ D X XY-12 TADF382055 38 1-13 ER20 S MAX RPM A B C G M 35 4000 80 95 59.5 23 55 $2,350.00 page 146

Tool Holder TAKAMAZ AXIAL MILLING AND DRILLLING HEAD (unit: mm) TAKAMAZ D X XY-12 TADA38ER20 38 1-13 ER20 S MAX RPM A B C G 35 5000 49 34 95 80 $950.00 AXIAL MILLING AND DRILLLING HEAD (unit: mm) TAKAMAZ D X XY-180 TADA50ER20 50 1-13 ER20 S MAX RPM A B G M 35 5000 57 96 31 20 $CALL AXIAL MILLING AND DRILLLING HEAD / OFFSET (unit: mm) Max. RPM: 400rpm TAKAMAZ D X d I A B C E M M1 M2 TADA25OF30127C 25 14-15 12.7 2:1 84 36.5 60 60 30 21.22 21.22 $1,100.00 BORING BAR HOLDER (unit: mm) DB25 TAKAMAZ X A B C E XY-120 TAXY120DB25.4 1 103 100 60 80 $590.00 XY-120 TAXY120DB25 25mm 103 100 60 80 $590.00 B25 (unit: mm) TAKAMAZ X A B C E F XY-120 TAXY120B25 25 103 95 60 80 70 $590.00 BORING BAR HOLDER B32 (unit: mm) TAKAMAZ X A B C E F XY-180 TAXY180B32 32 70 125 50 40 70 $CALL Double BORING BAR HOLDER (unit: mm) TAKAMAZ X A B C E F XY-120 TAXY12025X2 25 123 100 64 68 105 $780.00 page 147

Tool Holder TAKAMAZ/ STAR CUT OFF HOLDER (unit: mm) TAKAMAZ X A B C E F XY-120 TA-XY120-R20 21 105 110 40 20 20 $510.00 MULTIPLE TURNING HOLDER (unit: mm) TAKAMAZ X A B C E F XY-120 TA-XY-120-25X4 21 120 96 40 10 20 $620.00 VDI Tool Holder For STAR AXIAL MILLING AND DRILLINGHOLDER (unit: mm) STAR D X S Max rpm A B C E STDA22ER11 22 1-17 ER11M 17.5 5000 52 24.5 49 28 $660.00 (unit: mm) RADIAL MILLING AND DRILLING HOLDER STAR D X ECAS20 STDA3457163ER11 34 1-17 ER11M ECAS20 STDA3457155ER11 34 1-10 ER16M ECAS20 STDA3457150ER11 34 1-10 ER16M S Max rpm A B C E 17.5 5000 41 18 37.5 37.5 $660.00 23.5 5000 57 25 37.5 37.5 $660.00 23.5 5000 36.5 24.5 37.5 37.5 $660.00 (unit: mm) STAR D X ECAS20 BR34ER16 34 1-10 ER16M S Max rpm A B C E F M 23.5 4000 81 38 20.5 96 22 62 $3,300.00 BORING BAR HOLDER (unit: mm) STAR D A B C E D1 D2 ER STATIC TOOL HOLDER STB5172-6 22 38 29 49 28 6 27 $70.00 STB5172-8 22 38 29 49 28 8 27 $70.00 STB5172-10 22 38 29 49 28 10 27 $70.00 STB5172-12 22 38 29 49 28 12 27 $70.00 STB5172-16 22 38 29 49 28 16 27 $70.00 (unit: mm) STAR D X STB5172ER16M 22 1-10 ER16M S A B C E 23.5 49 28 37 28 $110.00 page 148

VDI Tool Holder STAR RADIAL TRIPPLE HEADS MILLING AND DRILLING HOLDER (unit: mm) Max. RPM 4000 STAR D X SR-20R SR-32J STARBR34-16M-3C STARBR34-16M-3C-32J 34 1-10 ER16M 34 1-10 ER16M S A B C E G M M1 M2 22 145 37.5 20.5 96 22 62 31 31 $CALL 22 154 37.5 15 96 28 65 34 34 $CALL RADIAL DOUBLE HEADS MILLING AND DRILLING HOLDER (unit: mm) Max. RPM 4000 STAR D X SR-20R BR34-16M-2C 34 1-10 ER16M S A B C E G M M1 22 112 38 20.5 96 22 62 31 $CALL RADIAL MULTI HEADS-OFFSET HOLDER Specifi cations: (unit: mm) Max. RPM 4000 D X S A B C C1 E G G1 M M1 M2 SR-32J 34 1st- 22 153.5 37.5 22.5 130.5 120.5 28 10 65 34 34 STAR- $CALL ER16M BR34-11- 16M-6C 2nd- ER11 19 Specifi cations: (unit: mm) Max. RPM 4000 s D X S A B C C1 E G G1 M M1 M2 SR-32J 34 1st- 22 153.5 37.5 22.5 130.5 120.5 28 10 65 34 34 STAR- $CALL ER16M BR34-11- 16M-6C 2nd- ER11 19 ER STATIC HOLDER Specifi cations: (unit: mm) D X 22 1-10 ER16M S A B C E 22 49 28 37 28 ST- B5172- ER16M $CALL Specifi cations: (unit: mm) D A B C E D1 D2 22 38 29 49 28 6 27 ST-B5172-6 $CALL 22 38 29 49 28 8 27 ST-B5172-8 $CALL 22 38 29 49 28 10 27 ST-B5172-10 $CALL 22 38 29 49 28 12 27 ST-B5172-12 $CALL 22 38 29 49 28 16 27 ST-B5172-16 $CALL page 149

VDI Tool Holder CITIZEN VDI Tool Holder For CITIZEN AXIAL MILLING AND DRILLING HOLDER (unit: mm) Max. RPM 4000 CITIZEN D X S I A B C E M M1 M2 L 5 20 GSE910 DA32OF30CUT 32 14-15 12.7 2:1 109 36.5 111 64 30 21.22 21.22 $1100.00 RADIAL MILLING AND DRILLING HOLDER TRIPLE HEADS (unit: mm) Max. RPM 4000 CITIZEN D X S A B C G M M1 M2 L 5 20 BR323C910 32 1-10 ER16M 23.5 180 51 19 24 88.5 33.5 33.5 $4,400.00 GSE910 L 7 20 GSE1110 BR323C1110 32 1-10 ER16M 23.5 182 59 19 24 88.5 33.5 33.5 $4,600.00 TRIPLE BORING BAR HOLDER (unit: mm) CITIZEN D X A B C M M1 M2 L 5 20 GSE910 L 7 20 GSE1110 GSE91019.05-3 32 0.75 169 45 45 88.5 33.5 33.5 $730.00 GSE111019.05-3 32 0.75 182 59 30.5 88.5 33.5 33.5 $730.00 AXIAL MILLING AND DRILLING HOLDER (unit: mm) CITIZEN D X GSE-907 L20E GSC907- DA25ER11 S Max rpm A B G 25 1-7 ER11 19 6000 60.5 30 19.5 $CALL (unit: mm) CITIZEN D X GSE-307 L20 GSC307- DA25ER11 S Max rpm A B G 25 1-7 ER11 19 6000 45.5 30 14 $CALL RADIAL MILLING AND DRILLING HOLDER - MULTI HEAD (unit: mm) MAX. RPM 4000 CITIZEN D X S A B C E G H M M1 GSE2007 GSE2007- DB24-11-4 24 1-7 ER11 19 106 33 13 94 15 13 57.7 30 $CALL page 150

VDI Tool Holder CITIZEN (unit: mm) CITIZEN D X GSE-107 L20 GSE107- DF32-16-70 32 1-10 ER16M S Max A B C G M rpm 22 4000 88 35 72 24.5 70 $CALL (unit: mm) CITIZEN D X GSE-607 L20 GSE607- DB32-11-75 S Max rpm A B C E G M 32 1-7 ER11 19 4000 95 35.5 9.5 78 18 75 $CALL RADIAL MILLING AND DRILLING HOLDER (unit: mm) CITIZEN D X BSE-107 A20 BSE-107- DB31-11-80.6 S Max rpm A B C E G M 31 1-7 ER11 19 4000 100 35.5 25.5 94 18 80.6 $CALL (unit: mm) CITIZEN D X BSE-207 A20 BSE-207- DB31-11-2C S Max rpm A B C E G M M1 31 1-7 ER11 19 4000 129 35.5 25.5 94 18 80.6 28.5 $CALL TRIPLE BORING BAR HOLDER (unit: mm) CITIZEN D X A B C E M M1 M2 GDF510 GDF703-19.05-3 32 0.75 150 32 35 55 73 30 30 $CALL GDF702 GDF702-19.05-2 32 0.75 128 35 35 55 73 30 $CALL AXIAL MILLING AND DRILLING HOLDER (unit: mm) Max. RPM: 6000 D X S A B G s L20E/7M9 31 1-10 ER16M 22 59 35 24 GSC-1210-DA31-ER16M $CALL (unit: mm) Max. RPM: 6000 D X S A B G s L20E 25 1-10 ER11 19 42 28 18 GSC-3307-DA25-ER11 $CALL page 151

VDI Tool Holder MORI SEIKI VDI Tool Holder For For MORI SEIKI (DA Type) unit :MM MORI SEIKI SL-150 DL150 ZL150 SL-200 SL-250 SL-253SMC ZL-200 X E150-0105 1-13 ER-20 E150-0105-ER25 1-16 ER-20 E250-3115 2-20 ER-32 S RPM A B G 35 6000 52 86 18 $1,380.00 42 6000 61 86 34 $1420.00 50 6000 61 100 31 $1,540.00 For MORI SEIKI (DF Type) unit :MM MORI SEIKI SL-150 DL150 ZL150 SL-200 SL-250 SL-253SMC ZL-200 E150-0106 (E150-32106) X 1-13mm ER-20 E250-3114 2-20mm ER-32 S RPM A B C G M 35 5000 65 86 69.5 28 37.5 $2,412.00 50 5000 93 100 92.5 35 55 $2,780.00 For MORI SEIKI (Spindle 2) unit :MM MORI SEIKI DL151 E151-0160 (E151-32160) X 1-13mm ER-20 DL151 E151-32161 1-16mm ER-25 SL-150 DL-150 ZL-150 SL-200 SL-250 SL-253SMC ZL-200 E150-32110 1-13mm ER-20 E250-3114 (E250-32121) 2-20mm ER-32 S RPM A B C G M 35 5000 95 86 96 32 67.5 $2,120.00 35 5000 95 86 96 32 67.5 $2,120.00 35 5000 87 86 91.5 27 67.5 $2,120.00 50 5000 97 100 95 35 60 $2,460.00 For MORI SEIKI (Offset Type) MORI Spec. Dimensions Tool System RPM SEIKI A B D Collet DIN-6499 DL-151 mm E151-0159 92 100 86 ER-25 1-16mm 3000 $2,660 inch 3.94 3.94 3.39 ER-25 1/8-5/8 For MORI SEIKI Double Head Holder unit :MM MORI SEIKI SL-200 SL-250 SL-253SMC ZL-200 E250-3136 (E250-32136) Tool System Collet DIN-6499 2-20mm ER-32 1/8-3/4 S RPM A B C F G M 50 4000 93 100 87.5 93.5 30 60 $3,300.00 page 152

For MORI SEIKI RAIDAL MILLING AND DRILLING HEAD HEAVY CUT VDI Tool Holder MORI SEIKI unit :MM For MORI SEIKI RAIDAL MILLING AND DRILLING HEAD MORI SEIKI NL1500/2000 NL2500/3000 D X E1500-TA-T32207 60 2-20 ER-32 E1500-TA-T32217 60 3-36 ER-40 S RPM A B C G M 50 4000 136 108 110 37 90 $3,670.00 63 4000 136 108 116 54 90 unit :MM MORI SEIKI NL1500/2000 NL2500/3000 D X E1500-DF60-32-70-S 60 2-20 ER-32 S RPM A B C G M 50 5000 116 108 111 40 70 $2900.00 For MORI SEIKI AXIAL MILLING AND DRILLING HEAD unit :MM MORI SEIKI NL1500/2000 NL2500/3000 D X E1500-T32208 60 2-20 ER-32 E1500-DA60-ER32-S 60 2-20 ER-32 E1500-DA60-ER40 60 2-20 ER-32 S RPM A B C E 50 6000 96 31 130 108 $2,200.00 73 6000 73 31 130 108 $call 109 6000 109 46 130 108 $call unit :MM MORI SEIKI NL1500/2000 NL2500/3000 D Tool System Collet DIN-6499 E1500-DA60-20-50 60 1-13mm ER-20 1/16-1/2 E1500-DA60-25-50 60 1-16mm ER-25 1/8-5/8 S RPM A B C G M 35 4000 88 108 106 75 50 $2800.00 42 4000 88 108 108 75 50 $2800.00 unit :MM MORI SEIKI NL1500/2000 NL2500/3000 D X E1500-T32216-32A 60 2-20mm ER-32 E1500-TA-T32216-32 60 2-20mm ER-32 E1500-TA-T32216-40 60 3-26mm ER-40 S RPM A B C F G M 38 4000 130 108 87 87 23 90 $3,275.00 50 4000 130 108 110 110 39 90 $3,275.00 63 4000 130 108 117 117 46 90 $CALL unit :MM MORI SEIKI NL1500/2000 NL2500/3000 D X E1500- T602580-25B 60 1-16mm ER-25 S RPM A B C F G M 42 4000 +90 0 108 65 65.5 29.5 80 $5,700.00 page 153

VDI Tool Holder MORI SEIKI RAIDAL CUTTING HEAD unit :MM MORI SEIKI NL1500/2000 NL2500/3000 D X S RPM A B C G M T32211-27CUT-90 60 27 48 3000 130 108 96 34 90 unit :MM MORI SEIKI NL1500/2000 NL2500/3000 D X S RPM A B C E G T32212-DA60-22C 60 22 40 3000 76.5 63 130 108 31 NL1500-DA60-27C 60 27 60 3000 78 63 130 108 26 unit :MM Internal Coolant MORI SEIKI NL1500/2000 NL2500/3000 D X NL1500-CW- DF60-32-90 NL1500-CW- DF60-40-90 60 2-20 ER32 60 3-26 ER40 S RPM A B C G M 50 5000 130 108 96 34 90 63 5000 130 108 108 45.5 90 unit :MM Internal Coolant MORI SEIKI NL1500/2000 NL2500/3000 D X NL1500-CW-DA60- ER32 NL1500-CW-DA60- ER40 60 2-20 ER32 60 3-26 ER40 S RPM A B C G 50 5000 130 33 130 108 63 5000 143 46 130 108 Axial Double Head, Y Offset unit :MM Internal Coolant MORI SEIKI NL1500/2000 NL2500/3000 D X NL1500-DA60-20DY 60 1-13 ER20 S RPM A B C G M 35 4000 104 29 130 108 29 Radial Double Head unit :MM Internal Coolant MORI SEIKI NL1500/2000 NL2500/3000 D X NL1500- DF60-20-2-105 60 1-13 ER20 S RPM A B C F G M M1 35 4000 138 108 80 97 30.5 52 53 Radial Multi Head unit :MM Internal Coolant MORI SEIKI NL1500/2000 NL2500/3000 D X NL1500- DF60-20-4-105 60 1-13 ER20 S RPM A B C F G M M1 35 4000 138 108 108 97 29 52 53 page 154

Driven Gear Hobber VDI Tool Holder MORI SEIKI unit :MM Internal Coolant MORI SEIKI D X RPM A B C E F K M M1 NL1500/2000 NL2500/3000 NL1500/2000 NL2500/3000 E1500-DF60-22C-65-92 E1500-DF60-22.225C-65-92 60 78 4000 +20 0 108 125 101 111 22 92 65 60 78 4000 +20 0 108 125 101 111 22.225 92 65 Radial Milling & Drilling Head unit :MM MORI SEIKI NZ1500 NZ2000 D Tool System Collet DIN-6499 T32473A02 40 1-16mm ER-25 S RPM A B C G M 42 5000 120 80 77.5 30 85 $2,180.00 Axial Milling & Drilling Head unit :MM MORI SEIKI NZ1500 NZ2000 D Tool System Collet DIN-6499 T32473A01 40 1-16mm ER-25 S RPM A B C E 42 6000 80 29.5 100 82 $919.00 Axial Milling & Drilling Head unit :MM MORI SEIKI ZT1500 NZ2000 D X ZT1500-DA30-ER25 30 1-16mm ER-25 S RPM A B C 50 6000 102 30.5 68 Angular Head unit :MM A= ±90 MORI SEIKI ZT1500 NZ2000 s D X T324080A07- ER16A 30 1-10 ER16 S RPM B C F G M 19.5 4000 70 53 42.5 12 62 page 155

VDI Tool Holder MORI SEIKI Boring Bar Holder unit :MM MORI SEIKI NZ1500 NZ2000 D A B E F X M T32408A07 30 112 70 69 69 32 85 $909.00 T12080A01 40 125 78 69 69 32 100 $909.00 Turning Holder unit :MM MORI SEIKI NZ1500 NZ2000 D A B C E F X M T00276A01 40 95 20 65 45 69 32 85 $280.00 Bouble Boring Bar Holder unit :MM MORI SEIKI NZ1500 NZ2000 D A B C E F M M1 X NZ2000- BMT- B25x2-100 39.9 115 78 125 57.5 78 55 100 25 Boring Bar Holder unit :MM MORI SEIKI NZ1500 NZ2000 NZ1500 NZ2000 s D A B C E F M X NZ2000-BMT- B32-85 NZ2000-BMT- B32-100 39.9 115 78 110 60 78 85 32 39.9 115 78 125 60 78 100 32 unit :MM, Internal Coolant MORI SEIKI NZ1500 NZ2000 s D A B C E F M X NZ2000-BMT- B32-100-A 39.9 115 78 125 60 78 100 32 Turning Holder unit :MM MORI SEIKI NZ1500 NZ2000 s D A B C E M X NZ2000-BMT- C20-70 39.9 127 78 60 76 20 32 page 156

VDI Tool Holder MORI SEIKI Facing Holder unit :MM MORI SEIKI NZ1500 NZ2000 s D A B C E M X NZ2000-BMT- F20-85 39.9 110 81 85 63 20 20 Facing Holder unit :MM MORI SEIKI NL1500/2000 NL2500/3000 NL1500/2000 NL2500/3000 D A B C E M X NL1500- C25.4-70 59.9 5.1 4.2 2.7 2.5 1 1 $420.00 T03005-F25 59.9 135 108 100 65 25 25 $420.00 Turning Holder unit :MM MORI SEIKI NL1500/2000 NL2500/3000 NL1500/2000 NL2500/3000 D A B C E M X NL1500- C25.4-70 (Inch) T00186A10-C25 (metric) 59.9 5.1 4.2 2.7 2.5 1 1 $430.00 59.9 130 108 70 65 25 25 $430.00 Double Side Turning Holder unit :MM Double Side Twin Turning Holder MORI SEIKI NL1500/2000 NL2500/3000 NL1500/2000 NL2500/3000 s D A B C E M X NL1500-C25.4x2-70 (inch) T00184-C25x2-70 (metric) 59.9 6.063 4.252 2.756 2.56 1 1 59.9 154 108 70 65 25 25 unit :MM Turning Holder MORI SEIKI NL1500/2000 NL2500/3000 s D H1 H2 H3 H4 A B C E F NL1500-C25.4x4-78 (inch) 59.9 0.67 0.452 1.039 1 7.756 2.205 4.626 3.878 2.421 unit :MM NL1500/2000 NL2500/3000 s D A B C E F M X NL1500- C25.4-45 (inch) NL1500-C25-45 (metric) 59.9 6.77 4.252 2.756 2.567 1.77 1 1 172 108 70 65.2 45 25 25 page 157

VDI Tool Holder MORI SEIKI Boring Bar Holder unit :MM NL1500/2000 NL2500/3000 NL1500/2000 NL2500/3000 NL1500/2000 NL2500/3000 NL1500/2000 NL2500/3000 NL1500/2000 NL2500/3000 s D A B C E F M X NL1500- B31.75-80 (inch) NL1500- B38.1-70 (inch) NL1500- B38.1-85 (inch) T10097B06- B40-80 (metric) NL1500-B50-80 (metric) 59.9 5.315 4.252 4.724 2.756 3.7 3.15 1.25 59.9 5.315 4.252 4.232 2.756 3.7 2.756 1.5 59.9 5.315 4.252 4.626 2.756 3.7 3.15 1.5 59.9 135 108 120 70 94 80 40 59.9 135 108 120 70 94 80 50 unit :MM NL1500/2000 NL2500/3000 NL1500/2000 NL2500/3000 NL1500/2000 NL2500/3000 NL1500/2000 NL2500/3000 NL1500/2000 NL2500/3000 Internal Coolant s D A B C E F M X NL1500- B31.75-80-A (inch) NL1500-B38.1-70-A (inch) NL1500-B38.1-85-A (inch) T10097B06- B40-80-A (metric) NL1500-B50-80-A (metric) 59.9 5.315 4.252 4.724 2.756 3.7 3.15 1.25 59.9 5.315 4.252 4.232 2.756 3.7 2.756 1.5 59.9 5.315 4.252 4.626 2.756 3.7 3.15 1.5 59.9 135 108 120 70 94 80 40 59.9 135 108 120 70 94 80 50 Double Boring Bar Holder unit :MM D=59.9mm NL1500/2000 NL2500/3000 NL1500/2000 NL2500/3000 s A B C E M M1 X NL1500- B31.75x2-125 (inch) NL1500- B32x2-125 (metric) 5.59 4.252 5.827 2.795 3.15 4.92 1.25 142 108 148 71 80 125 32 Boring Bar Holder unit :MM s D A B C E M X NL1500/2000 NL2500/3000 NL1500- B38.1-70-L (inch) 59.9 5.71 4.25 4.23 2.85 2.76 1.5 unit : inch s s A B C E F G M X CL200B CL200B- 3.11 3.484 2.539 2.953 0.787 0.295 2.02 0.375 B9.525-51 page 158 CL200B- B9.525-76 CL200B- B12.70-76 3.11 3.484 3.523 2.953 0.787 0.295 3.03 0.375 3.11 3.484 3.523 2.953 0.787 0.295 3.03 0.5

VDI Tool Holder MIYANO VDI Tool Holder For For MIYANO (DA Type) BND,BNE,BNJ Specifi cations: Coupling Bevel Gear For MIYANO (AUTO TAPER Type) Machine D X BNE-34S BNE-51S BND-51S2 BNE-34S3/51S LZ-01R2/01RY2 LZ-02R2/02RY2 BND-51 BND-34S BNJ- 34S/42S/ 34SY/42SY BNE-DA38ER20 38 1-13mm ER-20 1/8-1/2 BNE-DA45ER20 45 1-13mm ER-20 1/8-1/2 BNE-DA45ER25 45 1-16mm ER-25 1/8-5/8 BND-DA45ER20S 45 1-13mm ER-20 1/8-1/2 DA45BNJER20 45 1-13mm ER-20 1/8-1/2 Specifi cations: S Max rpm A B C E G 35 6000 70 74 60 57 28 $1,170.00 35 6000 92 72 47 81 25 $1,170.00 42 6000 92 72 53 81 31 $1,170.00 35 6000 86 80 55 44.5 28 $1,250.00 35 6000 92 72 50 116 28 $1,320.00 For MIYANO (DF Type) Machine MIYANO D X TE25ER16 25 1-10mm ER-16 TE32ER20 32 1-13mm ER-20 1/8-1/2 TE40ER25 40 1-16mm ER-25 1/8-5/8 TE50ER32 50 2-20mm ER-32 1/8-3/4 S A B D1 30 70.5 30 30 $110.00 35 65 40 40 $132.00 42 75 43 43 $147.00 50 85 48 48 $169.00 BND,BNE,BNJ Specifi cations: D X S Max. R.P.M. A B C E G M BND-51S2 BNE-34S3/51S LZ-01R2/01RY2 LZ-02R2/02RY2 45 1-13 ER20 45 1-16 ER25 35 5000 95 72 74 81 24.5 65 BNE-DF45-20-65 $2,550.00 42 5000 95 72 79 81 25.5 65 BNE-DF45-25-65 $2,700.00 BNJ- 34S/42S/ 34SY/42SY 45 1-13 ER20 35 5000 95 72 74 116 24.5 65 BNJ-DF45-20-65 $2,760.00 45 1-16 ER25 42 5000 95 72 74 116 24.5 65 BNJ-DF45-25-65 $2,500.00 For MIYANO Double Head Specifi cations: D X S Max. R.P.M. A B C F E G M BND-51S2 BNE-34S3/51S 45 1-16 ER25 42 4000 98 72 92 92 81 33 65 BNE-DF45-25-65D $3,300.00 BNJ- 34S/42S /34SY/42SY 45 1-16 ER25 42 4000 95 72 92 92 116 33 65 BNJ-DF45-25-65D page 159

VDI Tool Holder MIYANO For MIYANO (Offset) BNE-34S, BNE-51S Specifi cations: Machine BNE-34S BNE-51S D X BNE- DB38ER20 38 1-13mm ER-20 1/8-1/2 S Max rpm A B C G M 35 3500 112 74 18 17 90 $2,790.00 For MIYANO (Offset/Angle) Specifi cations: BND-51S2 BNE- 34S3/51S D X S Max. R.P.M. 45 1-10 ER16 A B C E F M 20 4000 20 72 110 81 166 102 BNE- DA45- ER16A-20 $3,300.00 For MIYANO Tap Holder Specifi cations: BNE-34S BNE-51S D X S Max. R.P.M. 38 1-10 ER16 A B C E G 30 3000 74 70 78 57 46.5 BNE-TDA38- ER16 $3,300.00 For MIYANO Axial Holder BNC Specifi cations: D X S Max. R.P.M. BNC 38 1-10 ER16 A B C E G 30 6000 129.5 70 52.5 57 26.5 BNC-DA38- ER16 $1210.00 For MIYANO Radial Holder BNC Specifi cations: D X S Max. R.P.M. BNC 38 1-10 ER16 A B C E F G M 30 5000 87 70 65 57 129.5 27 59 BNC-DA38- ER16 $1210.00 page 160

VDI Tool Holder MIYANO MIYANO Holder ABX ABX-51TH3/64TH3 ABX-51SY2/64SY2 BND-51SY2 BND-34S5/34SY5 BNE-42S6/42SY6/51S6/51SY6 BNE-51S5/51SY5 BNJ-34S3/42S3/51S3 BNJ-34SY3/42SY3/51SY3 BNJ-34S2/42S2/51S2 BNJ-34SY2/42SY2/51SY2 Specifi cations: D X S Max. R.P.M. 45 1-16 ER25M A B C E G 35 6000 92 72 59 55 32 ABX-DA45- ER25M $1,370.00 Specifi cations: Internal Coolant D X S Max. R.P.M. 45 1-16 ER25M A B C E G 35 6000 92 72 92 55 32 ABX-DA45- ER25M Specifi cations: D X S Max. R.P.M. 45 1-16 ER25 45 1-16 ER25 45 1-16 ER25 A B C E G M 42 5000 95 72 79.5 53 29.5 65 ABX- DF45-25-65 42 8000 95 72 79.5 53 29.5 65 ABX-DF45-25-65I 42 5000 116 72 79.5 53 29.5 85 ABX- DF45-25-85 Specifi cations: D X S Max R.P.M. 45 1-16 ER25 45 1-13 ER20 45 1-16 ER25 A B C F E G M 42 4000 95 72 80.5 80.5 53 30.5 65 ABX-DF45-25-65D 35 4000 95 72 78.5 78.5 53 28.5 65 ABX-DF45-20-65D 42 4000 116 72 80.5 80.5 53 30.5 85 ABX-DF45-25-85D Specifi cations: D X S Max R.P.M. 45 1-10 ER16 A B C E G M 30 5000 84 96 82.5 55 27 24 ABX-DA45-16DY Specifi cations: D X S Max R.P.M 45 1-10 ER16A A B C E F G M 19.5 4000 ±90 72 92 55 43 12 66 ABX-DA45-16BAC Specifi cations: Internal Coolant D X S Max R.P.M. 45 1-16 ER25 A B C E F G M 42 5000 116 72 79.5 53 75.5 29.5 85 ABX-CW- DF45-25-85 page 161

VDI Tool Holder MORI SEIKI MIYANO Boring Bar Holder ABX ABX-51TH3/64TH3 ABX-51SY2/64SY2 BND-51SY2 BND-34S5/34SY5 BNE-42S6/42SY6/51S6/51SY6 BNE-51S5/51SY5 BNJ-34S3/42S3/51S3 BNJ-34SY3/42SY3/51SY3 BNJ-34S2/42S2/51S2 BNJ-34SY2/42SY2/51SY2 Specifi cations: External Coolant X A B C M 25 92 72 97 75 ABX-B25-75 25 92 72 104 85 ABX-B25-85 Specifi cations: Internal Coolant X A B C M 25 92 72 97 75 ABX-B25-75-A 25 92 72 104 85 ABX-B25-85-A Specifi cations: External/ Internal Coolant X A B C M M1 25 104 92 72 50 85 ABX-B25X2-85 Specifi cations: X A B C M 25 92 72 97 75 ABX-B25-75-A 25 92 72 104 85 ABX-B25-85-A internal coolant type is also available upon request. MIYANO Boring Bar + Turning Holder ABX Specifi cations: X X1 A B C E M M1 25 20 105 115 75 20 50 85 ABX-B25x2-85-C20 25 20 105 115 75 20 50 85 ABX-B25x2-85- C20-L MIYANO Turning Holder ABX Specifi cations: X A B C E F M 20 115 76 60 72 25 20 ABX-C20-60 25 120 88 70 72 35 25 ABX-C25-70 Specifi cations: X A B C F M 20 94 75 60 25 20 1X780300-C20 page 162

MIYANO Double Side Turning Holder ABX ABX-51TH3/64TH3 ABX-51SY2/64SY2 BND-51SY2 BND-34S5/34SY5 BNE-42S6/42SY6/51S6/51SY6 BNE-51S5/51SY5 VDI Tool Holder MIYANO BNJ-34S3/42S3/51S3 BNJ-34SY3/42SY3/51SY3 BNJ-34S2/42S2/51S2 BNJ-34SY2/42SY2/51SY2 Specifi cations: X A B C M 20 138 75 60 20 ABX-C20x2-60 Specifi cations: X A B C M 20 138 78 60 20 1X784600-C20x2 MIYANO Facing Holder ABX Specifi cations: X A B C M 20 94 76 70 20 ABX-F20-70 MIYANO Facing Holder ABX Specifi cations: X A B C E F 20 115 60 24 72 76 ABX-R20-60 Specifi cations: A B C E F H X M 122 82 89 38 38 20 26 77 ABX-R20-55 MIYANO Double Boring Bar Holder BNA-34C/42C/34S/42S BNA-34DHY/42DHY BNA-42MSY Specifi cations: Machine X A B C M M1 BNA- 34C/42C/34S/42S BNA- 34DHY/42DHY BNA-42MSY 25 95 91.5 68 44 79 BNA- B25x2-79 page 163

VDI Tool Holder MORI SEIKI MIYANO Three Position Boring Bar Holder BNA-34C/42C/34S/42S BNA-34DHY/42DHY BNA-42MSY Specifi cations: Machine X A B C E M M1 M2 BNA-34C/42C/34S/42S BNA-34DHY/42DHY BNA-42MSY 25 95 91.5 68 105 44 79 72.9 BNA- B25x3-79 MIYANO Turning Holder Specifi cations: Machine X A B C F M BNA-34C/42C/34S/42S BNA-34DHY/42DHY BNA-42MSY 20 108 78 51 24 20 BNA- C20-50 MIYANO Double Side Turning Holder Specifi cations: Machine X A B C M BNA-34C/42C/34S/42S BNA-34DHY/42DHY BNA-42MSY 20 128 78 51 20 BNA- C20x2-50 MIYANO Cutting Holder Specifi cations: Machine X A B C E F BNA-34C/42C/34S/42S BNA-34DHY/42DHY BNA-42MSY 20 108 70 12 39 35 BNA- R20-70 MIYANO Boring Bar Holder BNE ABX-51TH3/64TH3 ABX-51SY2/64SY2 BND-51S2 BND-51C2 BND-51SY2 BND-34S5/34SY5 BNE-51S5/51SY5 BNE-34S3/51S BNJ-34S3/42S3/51S3 BNJ-34SY3/42SY3/51SY3 BNJ-34S2/42S2/51S2 BNJ-34SY2/42SY2/51SY2 BNJ-34S/42S/34SY/42SY LZ-01R2/01RY2 LZ-02R2/02RY2 Specifi cations: X A B C M M1 25 105 92 72 50 85 BNE-B25x2-85 MIYANO Boring Bar Holder BNE Specifi cations: External Coolant X A B C M 25 88 72 105 85 BNE-B25x2-85 Internal Coolant also available upon request. page 164

VDI Tool Holder MIYANO MIYANO Boring Bar Holder BNJ BNJ-34S3/42S3/51S3 BNJ-34SY3/42SY3/51SY3 BNJ-34S2/42S2/51S2 BNJ-34SY2/42SY2/51SY2 BNJ-34S/42S/34SY/42SY Specifi cations: External Coolant X A B C E F M 25 55 84 47 49 16 30 2K749001- BNJ-B25-30 MIYANO Cutting Holder BNJ BNJ-34S3/42S3/51S3 BNJ-34SY3/42SY3/51SY3 BNJ-34S2/42S2/51S2 BNJ-34SY2/42SY2/51SY2 BNJ-34S/42S/34SY/42SY Internal Coolant type is also available upon request. Specifi cations: External Coolant X A B C E F M 25 115 70 103 38 38 25 1X784700-R20 MIYANO Boring Bar Holder LX-06E2 Specifi cations: External Coolant Machine X A B C F M LX-06E2 25 97 88 83.5 22 55 LX-06E2-B25-55 Specifi cations: Internal Coolant Machine X A B C F M LX-06E2 25 97 88 83.5 22 55 LX-06E2-B25-55-A VDI Tool Holder For WASINO For WASINO A-12 Axial Milling & Drilling Head Specifi cations: (Maximum RPM: 6000) Machine D X S A B C E H A-12 55 DA55WA-ER20 ER-20 1-13mm 35 63 25 58 63 25.8 $1,320.00 A-12 55 DA55WA-ER32 ER-32 2-20mm 50 67 29 58 63 25.8 $1,320.00 For WASINO A-12 Radial Milling & Drilling Head Specifi cations: (Maximum RPM: 5000) Machine D X S A B C G M H A-12 55 DF55WA-20-55 ER-20 1-13mm 35 87 83 73 29 55 25.8 $2,200.00 A-12 55 DF55WA-32-55 ER-32 2-20mm 50 87 83 77 33 55 25.8 $2,200.00 page 165

VDI Tool Holder WASINO VDI Tool Holder For WASINO For WASINO A-18 Radial Milling & Drilling Head Specifi cations: (Maximum RPM: 3500) D X DF65ER32 65mm 2.56 ER-32 2-20mm ER-32 1/8-3/4 S A B C G M H 50mm 1.97 130mm 5.12 84mm 3.31 78mm 3.07 25mm 0.98 95mm 3.74 24.8mm 0.98 $2,490.00 For WASINO A-12 Boring Bar Holder Specifi cations: D X A B C E A12-B25 55mm 25mm 35mm 85mm 78.5mm 70mm $330.00 2.17 0.98 1.38 3.35 3.09 2.76 A12-B32 55mm 2.17 32mm 1.26 35mm 1.38 85mm 3.35 78.5mm 3.09 70mm 2.76 $330.00 For WASINO A-12 Double Boring Bar Holder External and internal coolant supply. Specifi cations: For WASINO A-18 Axial Milling & Drilling Head Specifi cations: (Maximum RPM: 6000) D X A B C E F A12-B16X2 55mm 16mm 35mm 85mm 78.5mm 70mm 130mm $400.00 2.17 0.63 1.38 3.35 3.09 2.76 5.12 A12-B25X2 55mm 2.17 25mm 0.98 External and internal coolant supply. 35mm 1.38 85mm 3.35 78.5mm 3.09 70mm 2.76 130mm 5.12 $400.00 D Collet DIN-6499 S A B C H DA65-90L-ER20M DA65-80L-ER25 DA65-ER32 DA65-90L-ER32 65mm 2.56 65mm 2.56 65mm 2.56 65mm 2.56 ER-20M 1-13mm ER-20M 1/16-1/2 ER-25 1-16mm ER-25 ER-32 2-20mm ER-32 1/8-3/4 ER-32 2-20mm ER-32 1/8-3/4 28mm 1.10 40mm 1.57 50mm 1.97 50mm 1.97 120mm 4.72 109mm 4.29 68.5mm 2.70 121mm 4.76 90mm 3.54 70mm 2.76 38.5mm 1.52 91mm 3.58 88mm 3.46 88mm 3.46 88mm 3.46 88mm 3.46 24.8mm 0.98 24.8mm 0.98 24.8mm 0.98 24.8mm 0.98 $1520.00 $1520.00 $1520.00 $1520.00 For WASINO A-18 Axial Face Milling Head Specifi cations: (Maximum RPM: 4000) D X A B C H DA65-FM32 DA65-FM32-75L DA65-FM22-60L 65mm 2.56 65mm 2.56 65mm 2.56 32mm 1.26 32mm 1.26 22mm 0.87 50mm 1.97 75mm 2.95 60mm 2.36 40mm 1.57 40mm 1.57 53mm 2.09 88mm 3.46 88mm 3.46 88mm 3.46 24.8mm 0.98 24.8mm 0.98 24.8mm 0.98 $1,390.00 $1340.00 $1340.00 For WASINO A-18 Axial Side Cutter Head Specifi cations: (Maximum RPM: 4000) D X A B C H DA65-SC25.4-115 DA65-SC22-90 DA65-SC16-115 65mm 2.56 65mm 2.56 65mm 2.56 25.4mm 1 22mm 0.87 16mm 0.63 115mm 4.53 90mm 3.54 115mm 4.53 60mm 2.36 52mm 2.05 50mm 1.97 88mm 3.46 88mm 3.46 88mm 3.46 24.8mm 0.98 24.8mm 0.98 24.8mm 0.98 $1,390.00 $1340.00 $1340.00 page 166

VDI Tool Holder WASINO VDI Tool Holder For WASINO For WASINO A-12 For WASINO A-18 Turning Holder Turning Holder Specifi cations: D X A B C A12-T16 55mm 16mm 55mm 85mm 50mm $330.00 2.17 0.63 2.17 3.35 1.97 A12-T20 55 2.17 A12-T25 55 2.17 External coolant supply. Specifi cations: 20mm 0.63 25mm 0.63 D X A B C A18-T20 65mm 20mm 65mm 97mm 65mm $370.00 2.56 0.79 2.56 3.82 2.56 External coolant supply. 55mm 2.17 60mm 2.17 85mm 3.35 85mm 3.35 50mm 1.97 50mm 1.97 $330.00 $330.00 For WASINO A-18 Boring Bar/ U Drill Holder Specifi cations: D X A B C A18-B32 65mm 32mm 105mm 97mm 55mm $370.00 2.56 1.26 4.13 3.82 2.17 A18-B40 65mm 2.56 A18-B40-BK50 65mm 2.56 External coolant supply. 40mm 1.57 40mm 1.57 105mm 4.13 105mm 4.13 97mm 3.82 97mm 3.82 55mm 2.17 55mm 2.17 $370.00 $370.00 For WASINO A-18 Facing Holder Specifi cations: D X A B C A18-F20 65mm 2.56 20mm 0.79 95mm 3.74 97mm 3.82 50mm 1.97 $370.00 External coolant supply. For WASINO J1 Facing Holder X A B C J1-F20 20mm 45mm 60mm 78.5mm $340.00 0.79 1.77 2.36 3.09 For WASINO J1 Boring Bar Holder X A B C E J1-B25 25mm 45mm 60mm 45mm 25mm $400.00 0.98 1.77 2.36 1.77 0.98 For WASINO J1 Double boring Bar Holder X A B C E F J1-B16X2 16mm 62mm 60mm 45mm 25mm 51mm $400.00 0.63 2.44 2.36 1.77 0.98 2.01 page 167

VDI Tool Holder BMT Tool Holder For Korea Series BMT RADIAL MILLING AND DRILLING HOLDER DOOSAN DAEWOO HWACHEON HYUNDAI WIA SMEC Specifi cations: (unit: mm) D X BMT45 45 1-13 ER20 BMT45 45 1-16 ER25 BMT55 55 1-16 ER25 BMT55 55 1-16 ER25 BMT55 55 1-16 ER25 BMT65 65 2-20 ER32 BMT65 65 2-20 ER32 BMT65 65 2-20 ER32 BMT65 65 2-20 ER32 BMT65 65 2-20 ER32 BMT75 75 3-26 ER40 BMT75 75 3-26 ER40 BMT75 75 3-26 ER40 BMT75 75 3-26 ER40 BMT85 85 10-34 ER50 S Maximum A B C G M R.P.M External Coolant Internal Coolant 35 5000 95 75 77.5 30 65 DW220-DF45-20-65 $call DW220-DF45-20-65K $call 42 5000 95 75 81 32 65 DW220-DF45-25-65 $call DW220-DF45-25-65K $call 42 5000 86 85 81 31 60 DW230-DF55-25-60 $2,200.00 DW230-DF55-25-60K $2,550.00 42 5000 106.5 85 82 31 80 DW230-DF55-25-80 $call DW230-DF55-25-80K $call 42 5000 111.5 85 82 31 85 DW230-DF55-25-85 $call DW230-DF55-25-85K $call 50 5000 101 94 97.5 35.5 65 DW300-DF65-32-65 $call DW300-DF65-32-65K $call 50 5000 108 94 96 34 72 DW300-DF65-32-72 $2,500.00 DW300-DF65-32-72K $2,850.00 50 5000 121 94 96.5 34.5 85 DW300-DF65-32-85 $call DW300-DF65-32-85K $call 50 5000 137 94 96.5 34.5 100 DW300-DF65-32-100 $call DW300-DF65-32-100K $call 50 5000 152 94 99.5 33.5 115 DW300-DF65-32-115 $call DW300-DF65-32-115K $call 63 5000 105 112 110.5 44 60 DW350-DF75-40-60 $2,600.00 DW350-DF75-40-60K $2,900.00 63 5000 115 112 106.5 39 70 DW350-DF75-40-70 $call DW350-DF75-40-70K $call 63 5000 135 112 106.5 39 90 DW350-DF75-40-90 $call DW350-DF75-40-90K $call 63 5000 170 112 110.5 44 125 DW350-DF75-40-125 $call DW350-DF75-40-125K $call 78 5000 136 125 141.5 50.5 110 DW700-DF85-50-110 $3,550.00 DW700-DF85-50-110K $3,950.00 (unit: mm) D X BMT55 DW230DF552560D ER25 $3,750.00 BMT55 DW230DF552570D ER25 $3,750.00 BMT65 DW300DF653272D 65 ER32 $3,850.00 page 168

VDI Tool Holder BMT AXIAL MILLING AND DRILLING HOLDER DOOSAN DAEWOO HWACHEON HYUNDAI WIA SMEC Specifi cations: (unit: mm) s D X BMT45 45 1-13 ER20 BMT55 55 1-16 ER25 BMT65 65 1-16 ER25 BMT65 65 2-20 ER32 BMT65 65 2-20 ER32 BMT75 75 3-26 ER40 BMT85 85 3-26 ER40 BMT85 85 10-34 ER50 AXIAL OFFSET HOLDER S Maximum R.P.M. A B C E External Coolant Internal Coolant 35 6000 60 32.5 75 75 DW220-DA45-20 $call DW220-DA45-20K $call 42 6000 62 33 85 85 DW230-DA55-25 $926.00 DW230-DA55-25K $1,300.00 42 6000 66.5 35.5 94 94 DW300-DA65-25 $call DW300-DA65-25K $call 50 6000 68.5 38.5 94 94 DW300-DA65-32 $1,150.00 DW300-DA65-32K $1,350.00 50 6000 58 36 94 94 DW300-DA65-32-S $call DW300-DA65-32-SK $call 63 6000 78 43 115 115 DW350-DA75-40 $1,500.00 DW350-DA75-40K $1,900.0 63 6000 91 51 125 125 DW700-DA85-40 $call DW700-DA85-40K $call 78 6000 94 54 125 125 DW700-DA85-50 $2,500.00 DW700-DA85-50K $2,800.00 Specifi cations: (unit: mm) Max. RPM 5000 D X BMT65 65 1-13 ER20 S A B C E M 35 109 94 102 74 80 DW300- DA65-20-80 $call AXIAL CUTTING HOLDER Specifi cations: (unit: mm) Max. RPM 3000 D X S A B C E G DIN 6358 BMT55 55 16 32 42.5 30 85 85 17 DW230-DA55-16C $call BMT65 65 22 40 45.5 31 94 94 31 DW300-DA65-22C $call BMT65 65 27 59 39 22 94 94 26 DW300-DA65- $call 27C-S BMT75 75 27 50 55 37.5 115 115 33 DW350-DA75-27C $call BMT85 85 32 58 63 44 125 125 36 DW700-DA85-32C $call BMT85 85 31.75 58 63 44 125 125 36 DW700-DA85-31.75C $call RADIAL CUTTING HOLDER RADIAL MILLING AND DRILLING HOLDER OFFSET Specifi cations: (unit: mm) Max. RPM 3000 s D X DIN 6358 S A B C G M BMT65 65 22(mm) 40 108 94 77 31 72 DW300-DF65-22C-72 $call BMT65 65 22(mm) 40 121 94 77 31 85 DW300-DF65-22C-85 $call BMT65 65 22(mm) 40 137 94 77 31 100 DW300-DF65-22C-100 $call BMT75 75 27(mm) 50 115 112 88 33 70 DW350-DF75-27C-70 $call BMT75 75 27(mm) 50 135 112 88 33 90 DW350-DF75-27C-90 $call BMT75 75 27(mm) 50 170 112 88 33 125 DW350-DF75-27C-125 $call BMT85 85 1 (inch) 50 161 125 106 20 110 DW700-DF85-25.4C-110 $call Specifi cations: (unit: mm) Max. RPM 5000 D X BMT65 65 2-20 ER32 S A B C E F G M 50 162 94 44 47 93 34 125 DW300- DB65-32-125 page 169

VDI Tool Holder BMT AXIAL TAPPING HEADS Specifi cations: (unit: mm) Max. RPM 3000 D X BMT65 65 1-13 ER20 S A B C E 35 73.5 42.5 94 94 DW300- TDA65-ER20 RADIAL TAPPING HEADS ANGULAR HEADS Specifi cations: (unit: mm) Max. RPM 3000 D X BMT65 65 1-13 ER20 BMT65 65 1-13 ER20 BMT65 65 1-13 ER20 Specifi cations: (unit: mm) Max. RPM 4000 A=+90 0 D X BMT65 65 1-16 ER25 BMT75 75 2-20 ER32 BMT85 85 3-26 ER40 S A B C G M 40 108 94 113 51 72 DW300- TDF65-20-72 40 121 94 113 51 85 DW300- TDF65-20-85 40 137 94 113 51 100 DW300- TDF65-20-100 S B C E F G M 42 94 65.5 65 47 29 87 DW300- DA65-25B 50 115 93 85 57.5 36 108 DW350- DA75-32B 63 125 95 85 62.5 38 113 DW700- DA85-40B Specifi cations: (unit: mm) Max. RPM 4000 A=+90 0 D X BMT65 65 1-10 ER16AC S B C E F G M 42 94 51 65 47 15 87 DW300-DA65-16BAAC AXIAL DOUBLE HEADS Specifi cations: (unit: mm) Max. RPM 4000 s D X BMT75 75 1-13 ER20 S A B C E F 35 109 29 29 115 115 DW350- DA75-20DY RADIAL DOUBLE HEADS Specifi cations: (unit: mm) Max. RPM 4000 s D X BMT75 75 1-13 ER20 S A B C E G M M1 35 137 112 96.5 118 29 53 53 DW350- DF75-20-2-106 page 170

VDI Tool Holder BMT Tool Holder For Korea Series BMT-5480 AXIAL MILLING AND DRILLING HOLDER Specifi cations: (unit: mm) Max. RPM 6000 D X BMT45 45 1-13 ER20 BMT55 55 1-16 ER25 BMT65 65 2-20 ER32 S A B C E P DIN 5480 35 61.5 34 75 75 W14x0.8 DW220-5480- DA45-ER20 42 65 32 85 85 W16x0.8 DW230-5480- DA55-ER25 50 82 44 94 94 W20x0.8 DW300-5480- DA65-ER32 RADIAL MILLING AND DRILLING HOLDER Specifi cations: (unit: mm) Max. RPM 5000 D X BMT45 45 1-13 ER20 BMT55 55 1-16 ER25 BMT65 65 2-20 ER32 S A B C G M P DIN 5480 35 95 75 77.5 29 65 W14x0.8 DW220-5480- DF45-20-65 42 86.5 85 82 32 60 W16x0.8 DW230-5480- DF55-25-60 50 136 94 96.5 34.5 100 W20x0.8 DW300-5480- DF65-32-100 RADIAL DOUBLE HEAD HOLDER Specifi cations: (unit: mm) Max. RPM 4000 D X BMT45 45 1st-ER11 2nd- ER20 S A B C C1 E E1 M P DIN 5480 19 35 95 75 84 63 53.5 46.5 65 W14x0.8 DW220-5480-DF45-20-11-65D Tool Holder For Korea Series BMT CUTTING HOLDER CUTTING HOLDER Specifi cations: (unit: mm) X A B C E F s BMT55 25 123 82 46 50.5 22 DW230-R25-55-W100 Specifi cations: (unit: mm) s X A B C F M Order No. BMT65 26 140 90 48.5 25 90 DW300-R25-90-W110 page 171

VDI Tool Holder BMT Tool Holder For Korea Series BMT TURNING HOLDER DOUBLE TURNING HOLDER (unit: mm) s X A B C E F M BMT45 mm 20 105 75 60-30 20 DW220-C20-60 $CALL inch 0.75 4.13 2.95 2.36-1.18 0.75 DW220-C19.05-60 $CALL BMT55 mm 20 115.5 86 60-30 20 DW230-C20-60 $CALL inch - - - - - - - - - BMT55 mm 20 115.5 86 80-30 20 DW230-C20-80 $CALL inch - - - - - - - - - BMT55 mm 25 120.5 90 80-30 25 DW230-C25-80 $CALL inch - - - - - - - - - BMT65 mm 25 131 97 75 55.2 30 25 DW300-C25-75 $460.00 inch 1 5.16 3.82 2.95 1.02 1.18 1 DW300-C25.4-75 $460.00 BMT65 mm - - - - - - - - - inch 1 5.16 3.82 4.72-1.38 1 DW300-C25.4-120 $480.00 BMT75 mm 25 145.5 112 100-30 25 DW350-C25-100 $480.00 inch 1 5.73 4.41 3.94-1.18 1 DW350-C25.4-100 $480.00 BMT75 mm 25 170.5 112 100-35 100 DW350-C25-100-L $CALL inch - - - - - - - - - BMT75 mm 32 153 120 85-35 32 DW350-C32-85 $CALL inch 1.25 6.02 4.72 3.35-1.38 1.25 DW350-C31.75-85 $CALL BMT75 mm 32 153 120 100-35 32 DW350-C32-100 $CALL inch 1.25 6.02 4.72 3.94-1.38 1.25 DW350- $CALL C31.75-100 BMT85 mm 32 174 124 75 75.5 40 32 DW700-C32-75 $CALL inch 1.25 6.77 4.88 2.95 2.97 1.57 1.25 DW700-C31.75-75 $CALL BMT85 mm 32 168.5 124 90-35 32 DW700-C32-90 $CALL inch 1.25 6.63 4.88 3.54-1.38 1.25 DW700-C31.75-90 $CALL BMT85 mm 32 168.5 124 120-50 32 DW700-C32-120 $CALL inch 1.25 6.63 4.88 4.72-1.97 1.25 DW700- C31.75-120 $CALL Specifi cations: (unit: mm) TURNING HOLDER TYPE DAEWOO Specifi cations: (unit: mm) X A B C E F G M BMT45 mm 20 131 75 60 - - - 20 DW220- $CALL C20x2-60 inch 0.75 5.16 2.95 2.36 - - - 0.75 DW220- $CALL C19.05x2-60 BMT65 mm 25 157 97 80 25.9 55.1 75 25 DW300- $CALL C25x2-75 inch 1 6.18 3.82 3.15 1.02 2.17 2.95 1 DW300- C25.4x2-75 $CALL s X A B C E F M BMT55 mm 20 134 86 70 50.2 30 20 DW230-C20-30-W100 inch - - - - - - - - - BMT55 mm 25 138 90 80 50.2 30 25 DW230-C25-30-W100 inch 1 5.43 3.54 3.15 1.97 1.18 1 DW230-C25.4-30-W100 BMT55 mm 25 135 90 80 45.2 30 25 DW230-C25-30-W90 inch 1 5.32 3.54 3.15 1.77 1.18 1 DW230-C25.4-30-W90 BMT65 mm 25 141 97 80 50.5 40 25 DW300-C25-40-W100 inch 1 5.55 3.82 3.15 1.99 1.58 1 DW300-C25.4-40-W100 BMT65 mm 25 146 97 80 55 40 25 DW300-C25-40-W110 inch - - - - - - - - - DOUBLE TURNING HOLDER TYPE DAEWOO Specifi cations: X A B C E F G M BMT55 mm 20 176 86 55 37.5 50.5 30 20 DW230-C20x2-30-W100 BMT55 mm 25 188 90 80 44 50.2 30 25 DW230-C25x2-30-W100 BMT55 inch 1 7.4 3.54 2.95 1.73 1.99 1.18 1 DW230-C25.4x2-30-W100 BMT55 mm 25 178 90 80 44 45.2 30 25 DW230-C25x2-30-W90 BMT55 inch 1 7.0 3.54 3.14 1.73 1.78 1.18 1 DW230-C25.4x2-30-W90 page 172

FACING HOLDER BORING HOLDER TYPE BMT TYPE BMT page 173 Specifi cations: (unit: mm) X A B C M BMT45 mm 20 86 75 80 20 DW220-F20-80 $CALL inch 0.75 3.39 2.95 3.15 0.75 DW220-F19.05-80 $CALL BMT55 mm 20 95 86 70 20 DW230-F20-70 $CALL inch - - - - - - - BMT55 mm 25 95 92 60 25 DW230-F25-60 $CALL inch 1 3.74 3.62 2.36 1 DW230-F25.4-60 $CALL BMT65 mm 25 100 96 82.5 25 DW300-F25-82 $CALL inch 1 3.94 3.78 3.25 1 DW300-F25.4-82 $CALL BMT65 mm 25 100 94 120 25 DW300-F25-120 $CALL inch 1 3.94 3.70 4.72 1 DW300-F25.4-120 $CALL BMT75 mm 25 120 112 122 25 DW350-F25-122 $CALL inch 1 4.72 4.41 4.80 1 DW350-F25.4-122 $CALL BMT75 mm 32 120 120 122 32 DW350-F32-122 $CALL inch 1.25 4.72 4.72 4.80 1.25 DW350-F31.75-122 $CALL BMT85 mm 32 168.5 124 107 32 DW700-F32-107 $CALL inch 1.25 6.63 4.88 4.21 1.25 DW700-F31.75-107 $CALL BMT85 mm 32 168.5 124 138 32 DW700-F32-138 $CALL inch 1.25 6.63 4.88 5.43 1.25 DW700-F31.75-138 $CALL Specifi cations: (unit: mm) External Coolant D A B C E M BMT45 mm 25 95 75 88-65 DW220-B25-65 $CALL inch 1 3.74 2.95 3.46 2.56 DW220-B25.4-65 $CALL BMT55 mm 32 95 75 90-65 DW220-B32-65 $CALL inch - - - - - - BMT55 mm 32 105 86 90-60 DW230-B32-60 $445.00 inch 1.25 4.13 3.62 3.54 2.36 DW230-B31.75-60 $CALL BMT55 mm 32 105 86 100-70 DW230-B32-70 $CALL inch - - - - - - BMT55 mm 32 105 86 109-80 DW230-B32-80 $CALL inch - - - - - - BMT55 mm 40 105 86 90-60 DW230-B40-60 $CALL inch 1.5 4.13 3.62 3.54 2.36 DW230-B38.1-60 $CALL BMT55 mm - - - - - - - inch 1.5 4.13 3.385 4.33 3.15 DW230-B38.1-80 $CALL BMT55 mm 40 105 86 100-70 DW230-B40-70 $CALL inch - - - - - - BMT65 mm 25 126 95 150 55.5 115 DW300-B25-115 $CALL inch - - - - - - - BMT65 mm 32 126 95 112 55.5 72 DW300-B32-72 $CALL inch 1.25 4.96 3.74 4.41 2.185 2.83 DW300-B31.75-72 $CALL BMT65 mm 40 126 95 100 55.5 60 DW300-B40-60 $CALL inch - - - - - - - BMT65 mm 40 126 95 105 55.5 65 DW300-B40-65 $CALL inch - - - - - - - BMT65 mm 40 126 95 112 55.5 72 DW300-B40-72 $CALL inch 1.5 4.96 3.74 4.41 2.185 2.83 DW300-B38.1-72 $CALL BMT65 mm 40 126 95 120 55.5 85 DW300-B40-85 $CALL inch 1.5 4.96 3.74 4.72 2.185 3.35 DW300-B38.1-85 $CALL BMT65 mm 40 126 95 140 55.5 100 DW300-B40-100 $CALL inch 1.5 4.96 3.74 5.51 2.185 3.94 DW300-B38.1-100 $CALL BMT65 mm 40 126 95 145 55.5 105 DW300-B40-105 $CALL inch - - - - - - - BMT65 mm 40 126 95 155 55.5 115 DW300-B40-115 $CALL inch - - - - - - - BMT65 mm - - - - - - - inch 1.5 4.96 3.74 6.3 2.185 4.72 DW300-B38.1-120 $CALL BMT65 mm 50 126 95 116 55.5 72 DW300-B50-72 $CALL inch 2 4.96 3.74 4.57 2.185 2.83 DW300-B50.8-72 $CALL BMT65 mm 50 126 95 132 55.5 90 DW300-B50-90 $CALL inch 2 4.96 3.74 5.2 2.185 3.54 DW300-B50.8-90 $CALL BMT65 mm 50 126 95 144 55.5 100 DW300-B50-100 $CALL inch - - - - - - - Internal Coolant holder is also available upon request. VDI Tool Holder BMT

VDI Tool Holder BMT Specifi cations: (unit: mm) External Coolant BORING HOLDER TYPE BMT D A B C M BMT75 mm 50 120 112 130 90 DW350-B50-90 inch 2 4.72 4.41 5.12 3.54 DW350-B50.8-90 BMT75 mm 50 145 112 130 90 DW350-B50-90-145 inch - - - - - - BMT75 mm 50 120 112 151 110 DW350-B50-110 inch 2 4.72 4.41 5.94 4.33 DW350-B50.8-110 BMT75 mm 50 120 112 166 125 DW350-B50-125 inch 2 4.72 4.41 6.53 4.92 DW350-B50.8-125 BMT75 mm 60 120 112 137 90 DW350-B60-90 inch 2.5 4.72 4.41 5.39 3.54 DW350-B63.5-90 BMT75 mm 60 120 112 160 110 DW350-B60-110 inch 2.5 4.72 4.41 6.30 4.33 DW350-B63.5-110 BMT75 mm 60 120 112 172 125 DW350-B60-125 inch 2.5 4.72 4.41 6.77 4.92 DW350-B63.5-125 BMT85 mm 50 161.5 124 157 110 DW700-B50-110 inch 2 6.36 4.88 6.18 4.33 DW700-B50.8-110 BMT85 mm 60 161.5 124 157 110 DW700-B60-110 inch 2.5 6.36 4.88 6.18 4.33 DW700-B63.5-110 BMT85 mm 80 161.5 130 162 110 DW700-B80-110 inch 3 6.36 5.12 6.38 4.33 DW700-B76.2-110 BMT85 mm 80 161.5 130 170 115 DW700-B80-115 inch 3 6.36 5.12 6.69 4.53 DW700-B76.2-115 DOUBLE BORING HOLDER BORING HOLDER SPLIT TYPE TYPE BMT TYPE BMT Internal Coolant holder is also available upon request. Specifi cations: (unit: mm) External Coolant, B : Internal/ External Coolant D A B E M M1 BMT55 mm 25 105 86 121 60 100 DW230-B25x2-100-B inch - - - - - - - BMT65 mm 25 126 95 127 65 105 DW300-B25x2-105-B inch - - - - - - - BMT65 mm - - - - - - - inch 1 4.96 3.74 5.75 3.35 4.72 DW300-B25.4x2-120 Specifi cations: (unit: mm) External Coolant, B : Internal/ External Coolant D A B E M M1 BMT45 mm - - - - - - - inch 0.75 3.74 2.95 4.17 2.56 3.54 DW220- B19.05x2-90-B BMT55 mm 32 102 85 112 45 85 DW230- B32x2-85 inch - - - - - - - Specifi cations: (unit: mm) External Coolant D A B C M s BMT75 mm - - - - - - inch 2 5.51 4.41 5.12 3.54 DW350-B50.8-90-T BMT75 mm - - - - - - inch 2.5 5.51 4.41 5.51 3.54 DW350-B63.5-90-T Specifi cations: (unit: mm) External Coolant D A B C E M s BMT75 mm 80 140 136 170 112 110 DW350-B80-110-140T inch - - - - - - - Specifi cations: (unit: mm) External Coolant D A B C E M s BMT85 mm 60 161.5 124 157 125 110 DW700-B60-110- 161T inch - - - - - - - page 174

VDI Tool Holder Tool Blocks Okuma Style Boring Bar Holder; ID Tool Block A H1 H2 1 L1 L2 L3 B1 B2 LB15-8435 1.5 31.7 63 82.6 20 45 102 80 $257.00 LB15-8032 40MM 30 63 82.6 20 45 102 80 $265.00 LB15-8436 2 34.9 66 82.6 20 45 102 80 $499.00 LB35-8436 2 34.9 72 124 25 70 116 85 $575.00 LB45-8437 2.5 41.3 90 126 25 70 134 105 $625.00 Okuma Style Turning Holder; OD Tool Block H1 H2 H3 L1 L2 L3 B1 LB15-8007 25MM 102 80 80.2 20 45 35 $257.00 LB15-8212 1 102 80 80.2 20 45 35 $257.00 LB15-8410 1 102 80 82.6 20 45 35 $257.00 LB35-8212 1 116 85 123.2 25 70 50.8 $645.00 LB45-8212 1.25 134 105 123.2 25 70 69.8 $685.00 Okuma Style Square Holder; OD Tool Block H1 H2 H3 L1 L2 L3 B1 B2 LB15-8213 1.5 102 80 82.6 20 45 25.4 50.8 $293.00 LB15-8008 25MM 102 80 83 20 45 25 50 $308.00 LB15-8411 1 102 80 95.2 20 45 25.4 50.8 $293.00 LB35-8411 1 116 85 123.8 25 70 25.4 50.8 $645.00 LB45-8411 1.25 134 105 126 25 70 28.6 60 $685.00 HAAS Style; ID Tool Block A H1 H2 L1 L2 L3 B1 B2 HSL10-8425 1 25.4 50 77 15 45 90 70 $435.00 HSL10-8432 1.25 25.4 50 77 15 45 90 70 $435.00 HSL20/30-8425 1 31.8 65 82.6 20 45 102 80 $257.00 HSL20/30-8432 1.25 31.8 65 82.6 20 45 102 80 $257.00 HSL20/30-8435 1.5 31.8 65 82.6 20 45 102 80 $257.00 HSL40-8436 2 41.3 90 122 25 70 134 105 $545.00 HSL40-8437 2.5 41.3 90 122 25 70 134 105 $575.00 page 175

VDI Tool Holder Tool Blocks HAAS Style; OD Tool Block MORI SEIKI Style; ID Tool Block H1 H2 H3 L1 L2 L3 B1 B2 HSL10-8411 3/4 90 70 77 15 45 19 38.1 $435.00 HSL20/30-8411 1 102 80 82.6 20 45 25.4 55.9 $293.00 HSL40-84111 1-1/4 134 105 123 25 70 30.5 60 $525.00 MORI SEIKI Style ; OD Tool Block A H1 H2 L1 L2 L3 B1 B2 MSL20/30-8435 1-1/2 40 73 90 20 35 106 76 $485.00 MSL25-8436 2 40 85 113 27 63 118 88 $695.00 NL3000-8435 1-1/2 80 120 18 94 135 108 84 $575.00 NL3000-8436 2 80 120 18 94 135 108 84 $595.00 H1 L1 L2 L3 L4 L5 H2 H3 B B2 MSL20/30-8212 1 153 70 45 20 35 106 76 90 50 $586.00 MSL25-8212 1 153 45 20 27 63 118 88 113 63 $645.00 ROMI Style; ID Tool Block ROMI Style ; ID Tool Block A H1 H2 L1 L2 L3 B1 B2 B3 ROM-86804M17 1 25 48 55 15 30 38 92 70 $345.00 A H1 H2 L1 L2 L3 B1 B2 B3 ROM-21171M20 1.25 30 61 95 15 60 38 108 86 $425.00 page 176

ROMI Style ; ID Tool Block VDI Tool Holder Tool Blocks A H1 H2 L1 L2 L3 B1 B2 B3 ROM-83582M27 1.25 50 80 90 20 35 38 114 94 $575.00 OKUMA HOWA Style ; ID Tool Block A H1 H2 L1 L2 L3 B1 B2 OHB4A-8435 1.5 40 75 100 15 70 115 90 $495.00 OHB4A-8436 2 40 75 100 15 70 115 90 $495.00 OHB6B-8435 1.5 65 100 90 15 50 105 80 $475.00 OHB6B-8436 2 65 100 90 15 50 105 80 $475.00 OKUMA HOWA Style ; OD Tool Block H1 H2 H3 L1 L2 L3 B1 B2 OHF4A-8411 1 115 90 100 15 70 30 55 $485.00 OHF6B-8611 1 105 80 80 15 50 40 65 $455.00 MAZAK Style ; ID Tool Block A H1 H2 L1 L2 L3 B1 B2 B3 NEX200/350-8435 1.5 50 80 90 20 35 38 114 94 $645.00 MAZAK Style ; ID Tool Block page 177 A H1 H2 L1 L2 L3 B1 B2 NEX450-8435 2.5 50 100 1410 38 88 124 118 $645.00

CNC Tooling System Angle Head Gromax Tooling System ANGLE HEAD Specifi cation: Unit:mm / Max rpm: 3000 BT Holder CAT Holder SK Holder D S L A B C E F G H BT40AHER32185 C40AHER32185 SK40AHER32185 2-20 60/65 185 44 78.2 62.8 113 80 36 88 $5,140.00 BT50AHER32195 C50AHER32195 SK50AHER32195 2-20 80/85/100 195 44 78.2 62.8 111 80 36 88 $5,700.00 HSK HOLDERS FOR TURNING MILLS I.D. HSK HOLDER FOR TURNING MILLS Unit: mm D1 D2 L1 L2 M HSKA63WH-B08-65 28 8 65 40 M8 $280.00 HSKA63WHB10-70 35 10 70 45 M8 $280.00 HSKA63WHB12-70 42 12 70 45 M8 $280.00 HSKA63WHB16-75 48 16 75 50 M10 $280.00 HSKA63WHB20-75 52 20 75 50 M10 $280.00 HSKA63WHB25-83 62 25 83 58 M12 $290.00 HSKA63WHB32-87 62 32 87 62 M12 $290.00 HSKA63WHB40-97 65 40 97 72 M16 $290.00 O.D. HSK HOLDER FOR TURNING MILLS Unit: mm L L1 H H1 H2 h HSKA63W-ETA2525-105 105 65 25 32 51 38 $630.00 Unit: mm L L1 H H1 H2 h HSKA63W-ETN2525R-115 105 65 25 32 51 38 $630.00 Unit: mm L L1 H H1 H2 h HSKA63W-ETH2525-90 105 65 25 32 51 38 $630.00 Unit: mm L L1 H H1 H2 h HSKA63W-ETV2525R-125 105 65 25 32 51 38 $630.00 page 178

Deep Hole Boring Holders Tungsten Carbide bar allow vibration free for deep hole boring. Bore depths up to 6x D1 (M) Double Cutter Boring Heads (Standard Type) Coolant Through. CNC Tooling System Boring System D1 D2 M L L1 CAT40-ECK1-100.984 (25) 1.299 (33) 5.906 (150) 3.94 (100) 7.283 (185) $118.00 CAT40-ECK2-150 1.260 (32) 1.654 (42) 7.559 (192) 5.91 (150) 9.252 (235) $120.00 CAT50-ECK1-125.984 (25) 1.299 (33) 5.906 (150) 4.92 (125) 7.677 (195) $185.00 CAT50-ECK2-125 1.260 (32) 1.654 (42) 7.677 (195) 4.92 (125) 9.055 (230) $185.00 CAT50-ECK3-150 1.575 (40) 1.969 (50) 9.449 (240) 5.91 (150) 11.220 (285) $189.00 CAT50-ECK4-200 1.969 (50) 2.362 (60) 11.811 (300) 7.87 (200) 13.976 (355) $217.00 BT40-ECK1-100.984 (25) 1.299 (33) 5.906 (150) 3.94 (100) 7.283 (185) $118.00 BT40-ECK2-150 1.260 (32) 1.654 (42) 7.559 (192) 5.91 (150) 9.252 (235) $120.00 BT50-ECK1-125.984 (25) 1.299 (33) 5.906 (150) 4.92 (125) 7.677 (195) $185.00 BT50-ECK2-125 1.260 (32) 1.654 (42) 7.677 (195) 4.92 (125) 9.055 (230) $189.00 BT50-ECK3-150 1.575 (40) 1.969 (50) 9.449 (240) 5.91 (150) 11.220 (285) $189.00 BT50-ECK4-200 1.969 (50) 2.362 (60) 11.811 (300) 7.87 (200) 13.976 (355) $217.00 Boring Heads Double Cutter Boring Heads (Standard Type) ECK No. D1 L D (Boring Range) Cutter (T) ERB27-35 1 23 40 27-35(1.03-1.38) CCMT060204 $261.00 ERB34-44 2 29 45 34-44(1.34-1.73) CCMT060204 $306.00 ERB43-55 3 37 55 43-55(1.69-2.16) CCMT09T308 $316.00 ERB-54-76 4 48 60 54-76(2.13-2.99) CCMT120408 $367.00 ERB75-105 5 60 75 75-105(2.95-4.13) CCMT120408 $433.00 ERB-104-150 6 80 90 104-150(4.09-5.90) CCMT120408 $473.00 Double Cutter Boring Heads (10 o Type) ECK No. D1 L D (Boring Range) Cutter (T) ERB27-35A 1 23 38 27-35(1.03-1.38) SCMT070204 $261.00 ERB34-44A 2 29 43 34-44(1.34-1.73) SCMT070204 $306.00 ERB43-55A 3 37 53 43-55(1.69-2.16) SCMT09T308 $316.00 ERB-54-76A 4 48 57 54-76(2.13-2.99) SCMT120408 $367.00 ERB75-105A 5 60 72 75-105(2.95-4.13) SCMT120408 $433.00 ERB-104-150A 6 80 87 104-150(4.09-5.90) SCMT120408 $473.00 Double Cutter Boring Heads (2-STEP Type) ECK No. D1 L D (Boring Range) Cutter (T) ERB27-35S 1 23 40 27-35(1.03-1.38) CCMT060204 $261.00 ERB34-44S 2 29 45 34-44(1.34-1.73) CCMT060204 $306.00 ERB43-55S 3 37 55 43-55(1.69-2.16) CCMT09T308 $316.00 ERB-54-76S 4 48 60 54-76(2.13-2.99) CCMT120408 $367.00 ERB75-105S 5 60 75 75-105(2.95-4.13) CCMT120408 $433.00 ERB-104-150S 6 80 90 104-150(4.09-5.90) CCMT120408 $473.00 Fine Boring Heads ECK No. D1 L D (Boring Range) Cutter (T) EFB27-35 1 23 40 27-35(1.03-1.38) TPGT080202L $598.00 EFB34-44 2 29 45 34-44(1.34-1.73) TPGT080202L $621.00 EFB43-55 3 37 55 43-55(1.69-2.16) TPGT090202L $675.00 EFB-54-76 4 48 60 54-76(2.13-2.99) TPGT090202L $705.00 EFB75-105 5 60 75 75-105(2.95-4.13) TPGT090202L $751.00 EFB-104-150 6 80 90 104-150(4.09-5.90) TPGT090202L $920.00 page 179

CNC Tooling System Boring System Boring Holder CAT Style Shank ECK D1 D2 M L L1 L2 L3 price Type No. inch inch inch inch (mm) Inch CAT40-ECK1-60 CAT40 1 0.906-2.992 2.36 (60) 3.937 2.992 - $120.00 CAT40-ECK1-80 CAT40 1 0.906-3.780 3.15 (80) 4.724 3.780 - $120.00 CAT40-ECK1-100 CAT40 1 0.906 1.417 3.937 3.94 (100) 5.512 4.173 2.362 $120.00 CAT40-ECK2-80 CAT40 2 1.142-3.976 3.15 (80) 4.921 3.976 - $120.00 CAT40-ECK2-100 CAT40 2 1.142-4.764 3.94 (100) 5.709 4.764 - $120.00 CAT40-ECK2-125 CAT40 2 1.142 1.575 4.960 4.92 (125) 6.693 5.748 3.189 $120.00 CAT40-ECK2-150 CAT40 2 1.142-5.91 (150) - $120.00 CAT40-ECK3-100 CAT40 3 1.457-5.157 3.94 (100) 6.102 5.157 - $120.00 CAT40-ECK3-125 CAT40 3 1.457-6.142 4.92 (100) 7.087 6.142 - $120.00 CAT40-ECK4-100 CAT40 4 1.900-5.354 3.94 (100) 6.299 5.354 - $120.00 CAT40-ECK4-125 CAT40 4 1.900-6.339 4.92 (125) 7.283 6.339 - $150.00 CAT40-ECK5-100 CAT40 5 2.362-5.945 3.94 (100) 6.900 5.945 - $150.00 CAT40-ECK5-125 CAT40 5 2.362-6.929 4.92 (125) 7.874 6.929 - $150.00 CAT40-ECK6-100 CAT40 6 3.150-6.535 3.94 (100) 7.480 6.535 - $150.00 CAT50-ECK1-125 CAT50 1 0.906 1.417 3.937 4.92 (125) 6.496 5.551 2.362 $190.00 CAT50-ECK2-100 CAT50 2 1.142-4.764 3.94 (100) 5.709 4.764 - $190.00 CAT50-ECK2-125 CAT50 2 1.142-5.748 4.92 (125) 6.693 5.748 - $190.00 CAT50-ECK3-100 CAT50 3 1.457-5.157 3.94 (100) 6.102 5.157 - $200.00 CAT50-ECK3-125 CAT50 3 1.457-6.142 4.92 (125) 7.087 6.142 - $200.00 CAT50-ECK3-150 CAT50 3 1.457-7.126 5.91 (150) 8.071 7.126 - $210.00 CAT50-ECK4-100 CAT50 4 1.900-5.354 3.94 (100) 6.299 5.354 - $200.00 CAT50-ECK4-150 CAT50 4 1.900-7.323 5.91 (150) 8.268 7.323 - $210.00 CAT50-ECK4-200 CAT50 4 1.900-9.291 7.87 (200) 10.236 9.291 - $230.00 CAT50-ECK5-150 CAT50 5 2.362-7.913 5.91 (150) 8.858 7.913 - $210.00 CAT50-ECK5-200 CAT50 5 2.362-9.882 7.87 (200) 10.827 9.882 - $230.00 CAT50-ECK5-250 CAT50 5 2.362-11.850 9.84 (250) 12.795 11.850 - $270.00 CAT50-ECK6-150 CAT50 6 3.150-8.504 5.91 (150) 9.449 8.504 - $210.00 CAT50-ECK6-200 CAT50 6 3.150-10.472 7.87 (200) 11.417 10.472 - $230.00 CAT50-ECK6-250 CAT50 6 3.150-12.441 9.84 (250) 13.386 12.441 - $270.00 BT (MAS403) Style Shank ECK D1 D2 M L L1 L2 L3 price Type No. (mm) (mm) BT30-ECK1-60 BT30 1 23-73 60 100 73 - $120.00 BT30-ECK2-100 BT30 2 29-118 100 145 118 - $120.00 BT30-ECK3-80 BT30 3 37-108 80 135 108 - $120.00 BT30-ECK4-80 BT30 4 48-113 80 140 113 - $120.00 BT40-ECK1-60 BT40 1 23-68 60 100 68 - $120.00 BT40-ECK1-80 BT40 1 23-88 80 120 88 - $120.00 BT40-ECK1-100 BT40 1 23 36 100 100 140 108 60 $120.00 BT40-ECK2-80 BT40 2 23-93 80 125 93 - $120.00 BT40-ECK2-100 BT40 2 29-113 100 145 113 - $120.00 BT40-ECK2-125 BT40 2 29 40 121 125 170 138 76 $120.00 BT40-ECK2-150 BT40 2 29-150 - $130.00 BT40-ECK3-100 BT40 3 37-123 100 155 123 - $120.00 BT40-ECK3-125 BT40 3 37-148 125 180 148 - $120.00 BT40-ECK3-150 BT40 3 37-150 - $120.00 BT40-ECK4-100 BT40 4 48-128 100 160 128 - $120.00 BT40-ECK4-125 BT40 4 48-153 125 185 153 - $120.00 BT40-ECK4-150 BT40 4 48-150 - $150.00 BT40-ECK5-100 BT40 5 60-143 100 175 143 - $150.00 BT40-ECK5-125 BT40 5 60-168 125 200 138 - $150.00 BT40-ECK5-150 BT40 5 60-150 - $150.00 BT40-ECK5-200 BT40 5 60-200 - $190.00 BT40-ECK6-100 BT40 6 80-158 100 190 158 - $160.00 BT50-ECK1-100 BT50 1 23-97 100 140 97 - $190.00 BT50-ECK2-100 BT50 2 29-102 100 145 102 - $190.00 BT50-ECK2-125 BT50 2 29-127 125 170 127 - $190.00 BT50-ECK3-100 BT50 3 37-112 100 155 112 - $200.00 BT50-ECK3-125 BT50 3 37-137 125 180 137 - $200.00 BT50-ECK3-150 BT50 3 37-162 150 205 162 - $200.00 BT50-ECK4-100 BT50 4 48-117 100 160 117 - $200.00 BT50-ECK4-150 BT50 4 48-167 150 210 167 - $210.00 BT50-ECK4-200 BT50 4 48-217 200 260 217 - $230.00 BT50-ECK5-150 BT50 5 60-182 150 225 182 - $210.00 BT50-ECK5-200 BT50 5 60-232 200 275 232 - $230.00 BT50-ECK5-250 BT50 5 60-282 250 325 282 - $260.00 BT50-ECK6-150 BT50 6 80-197 150 240 197 - $210.00 BT50-ECK6-200 BT50 6 80-247 200 290 247 - $230.00 BT50-ECK6-250 BT50 6 80-297 250 340 297 - $260.00 page 180

SD PRECISION COLLET CNC Tooling System Collet page 181 COLLET LEVEL RUNOUT AA 0.007MM / 0.00028 A 0.01MM / 0.00039 SD06 SD10 SD16 SD20 Order Code Range Order Code Range Order Code Range Order Code d inch mm inch mm inch mm inch mm $66.00 $66.00 $68.00 $83.00 SD06-2 0.069-0.079 1.75-2 SD10-2 0.069-0.079 1.75-2 SD16-3 0.098-0.118 2.5-3.0 SD20-4 0.157 4 SD06-2.25 0.079-0.089 2-2.25 SD10-2.25 0.079-0.089 2-2.25 SD16-3.5 0.118-0.138 3.0-3.5 SD20-6 0.236 6 SD06-2.5 0.089-0.098 2.25-2.5 SD10-2.5 0.089-0.098 2.25-2.5 SD16-4 0.138-0.157 3.5-4.0 SD20-8 0.315 8 SD06-2.75 0.098-0.108 2.5-2.75 SD10-2.75 0.098-0.108 2.5-2.75 SD16-4.5 0.157-0.177 4.0-4.5 SD20-10 0.394 10 SD06-3 0.108-0.118 2.75-3 SD10-3 0.108-0.118 2.75-3 SD16-5 0.177-0.197 4.5-5.0 SD20-12 0.472 12 SD06-3.5 0.118-0.138 3-3.5 SD10-3.5 0.118-0.138 3-3.5 SD16-5.5 0.197-0.217 5.0-5.5 SD20-16 0.630 16 SD06-4 0.138-0.157 3.5-4 SD10-4 0.138-0.157 3.5-4 SD16-6 0.217-0.236 5.5-6.0 SD20-20 0.787 20 SD06-4.5 0.157-0.177 4-4.5 SD10-4.5 0.157-0.177 4-4.5 SD16-6.5 0.236-0.256 6.0-6.5 SD06-5 0.177-0.197 4.5-5 SD10-5 0.177-0.197 4.5-5 SD16-7 0.256-0.276 6.5-7.0 SD06-5.5 0.197-0.217 5-5.5 SD10-5.5 0.197-0.217 5-5.5 SD16-7.5 0.276-0.295 7.0-7.5 SD06-6 0.217-0.236 5.5-6 SD10-6 0.217-0.236 5.5-6 SD16-8 0.295-0.315 7.5-8.0 SD10-6.5 0.236-0.256 6.0-6.5 SD16-8.5 0.315-0.335 8.0-8.5 SD25 SD10-7 0.256-0.246 6.5-7.0 SD16-9 0.335-0.354 8.5-9.0 Order Code d SD10-7.5 0.276-0.295 7.0-7.5 SD16-9.5 0.354-0.374 9.0-9.5 inch mm SD10-8 0.295-0.315 7.5-8.0 SD16-10 0.374-0.394 9.5-10.0 $92.00 SD10-8.5 0.315-0.335 8.0-8.5 SD16-10.5 0.394-0.413 10.0-10.5 SD25-6 0.236 6 SD10-9 0.335-0.354 8.5-9.0 SD16-11 0.413-0.433 10.5-11.0 SD25-8 0.354 9 SD10-9.5 0.354-0.374 9.0-9.5 SD16-11.5 0.433-0.453 11.0-11.5 SD25-10 0.394 10 SD10-10 0.374-0.394 9.5-10.0 SD16-12 0.453-0.472 11.5-12.0 SD25-12 0.472 12 SD16-12.5 0.472-0.492 12.0-12.5 SD25-16 0.630 16 SD16-13 0.492-0.512 12.5-13.0 SD25-20 0.787 20 SD16-13.5 0.512-0.531 13.0-13.5 SD25-25 0.984 25 SD16-14 0.531-0.551 13.5-14.0 SD16-14.5 0.551-0.571 14.0-14.5 SD16-15 0.571-0.591 14.5-15.0 SD16-15.5 0.591-0.610 15.0-15.5 SD16-16 0.610-0.630 15.5-16.0 TG Collect TG100 Collet Series $19.00/ea. Inch Decimal Inch Decimal TG-093 3/32 0.093 TG-562 9/16 0.562 TG-109 7/64 0.109 TG-578 37/64 0.578 TG-125 1/8 0.125 TG-593 19/32 0.593 TG-140 9/64 0.140 TG-609 39/64 0.609 TG-156 5/32 0.156 TG-625 5/8 0.625 TG-172 11/64 0.172 TG-640 41/64 0.640 TG-188 3/16 0.188 TG-656 21/32 0.656 TG-203 13/64 0.203 TG-671 43/64 0.671 TG-218 7/32 0.218 TG-687 11/16 0.687 TG-234 15/64 0.234 TG-703 45/64 0.703 TG-250 1/4 0.250 TG-718 23/32 0.718 TG-265 17/64 0.265 TG-734 47/64 0.734 TG-281 9/32 0.281 TG-750 3/4 0.750 TG-296 19/64 0.296 TG-765 49/64 0.765 TG-312 5/16 0.312 TG-781 25/32 0.781 TG-328 21/64 0.328 TG-796 51/64 0.796 TG-343 11/32 0.343 TG-812 13/16 0.812 TG-359 23/64 0.359 TG-828 53/64 0.828 TG-375 3/8 0.375 TG-843 27/32 0.843 TG-390 25/64 0.390 TG-859 55/64 0.859 TG-406 13/32 0.406 TG-875 7/8 0.875 TG-421 27/64 0.421 TG-890 57/64 0.890 TG-437 7/16 0.437 TG-906 29/32 0.906 TG-453 29/64 0.453 TG-921 59/64 0.921 TG-468 15/32 0.468 TG-937 15/16 0.937 TG-484 31/64 0.484 TG-953 61/64 0.953 TG-500 1/2 0.500 TG-968 31/32 0.968 TG-515 33/64 0.515 TG-984 63/64 0.984 TG-531 17/32 0.531 TG-1000 1 1.000 TG-546 35/64 0.546 ER Spring Collet ER11 ER16 ER20 ER25 ER32 ER40 $19.00/ea. $19.00/ea $20.00/ea $21.00/ea $21.00/ea $26.00/ea 0.5-1.0 0.5-1 v 1.0-1.5 1-2 v v v 1.5-2.0 2-3 v v v v 2.0-2.5 3-4 v v v v v 2.5-3.0 4-5 v v v v v 3.0-3.5 5-6 v v v v v 3.5-4.0 6-7 v v v v v 4.0-4.5 7-8 v v v v v 4.5-5.0 8-9 v v v v v 5.0-5.5 9-10 v v v v v 5.5-6.0 10-11 v v v v 6.0-6.5 11-12 v v v v 6.5-7.0 12-13 v v v v 13-14 v v v 14-15 v v v 15-16 v v v 16-17 v v 17-18 v v 18-19 v v 19-20 v v 20-21 v 21-22 v 22-23 v 23-24 v 24-25 v 25-26 v Unit: mm ER Collect Set ER11-GR (13 pcs) ER16-GR (10 pcs) ER20-GR (12 pcs) ER25-GR (15 pcs) ER32-GR (18 pcs) ER40-GR (22 pcs) ER50-GR (12 pcs) (12MM- 34MM) $210.00 $160.00 $200.00 $280.00 $340.00 $550.00 $450.00

CNC Tooling System Collet/ ER Holder ER Collet Chuck CAT40 ER Collet Chuck $125.00/ea. Collet D D Range(in) L MM INCH C4016ER2 ER16 30 1.181 0.097-0.0394 2.5 C4016ER4 ER16 30 1.181 0.097-0.0394 4 C4020ER4 ER20 34 1.339 0.039-0.511 4 C4025ER4 ER25 42 1.654 0.039-0.630 4 C4032ER3 ER32 50 1.969 0.079-0.787 3 C4032ER5 ER32 50 1.969 0.079-0.787 5 C4040ER4 ER40 63 2.480 0.118-1.181 4 CAT50 ER Collet Chuck $146.00/ea. C5016ER4 ER16 30 1.181 0.019-0.393 4 C5016ER6 ER16 30 1.181 0.019-0.393 6 C5020ER4 ER20 34 1.339 0.097-0.512 4 C5020ER6 ER20 34 1.339 0.097-0.512 6 C5025ER4 ER25 42 1.654 0.039-0.630 4 C5032ER4 ER32 50 1.969 0.078-0.787 4 C5032ER6 ER32 50 1.969 0.078-0.787 6 C5040ER4 ER40 63 2.480 0.118-1.024 4 C5040ER6 ER40 63 2.480 0.118-1.024 HSK HOLDER / ER HOLDER SK 40 ER Collet Chuck Collet D D Range L MM INCH (mm) SK40ER16-60 ER16 30 1.181 2.0-10 60 $80.00 SK40ER16-100 ER16 30 1.181 2.0-10 100 $80.00 SK40ER16-150 ER16 30 1.181 2.0-10 150 $110.00 SK40ER20-60 ER20 34 1.339 2.0-13 60 $80.00 SK40ER20-100 ER20 34 1.339 2.0-13 100 $80.00 SK40ER20-120 ER20 34 1.339 2.0-13 120 $110.00 SK40ER20-150 ER20 34 1.339 2.0-13 150 $110.00 SK40ER25-60 ER25 42 1.654 2.0-16 60 $80.00 SK40ER25-100 ER25 42 1.654 2.0-16 100 $80.00 SK40ER25-150 ER25 42 1.654 2.0-16 150 $130.00 SK40ER32-70 ER32 50 1.969 2.0-20 70 $80.00 SK40ER32-100 ER32 50 1.969 2.0-20 100 $80.00 SK40ER32-150 ER32 50 1.969 2.0-20 150 $130.00 SK40ER40-80 ER40 63 2.480 3.0-26 80 $100.00 SK40ER40-100 ER40 63 2.480 3.0-26 100 $100.00 SK40ER40-150 ER40 63 2.480 3.0-26 150 $140.00 SK 50 ER Collet Chuck SK50ER16-60 ER16 30 1.181 2.0-10 60 $150.00 SK50ER16-100 ER16 30 1.181 2.0-10 100 $150.00 SK50ER16-150 ER16 30 1.181 2.0-10 150 $160.00 SK50ER20-100 ER20 34 1.339 2.0-13 100 $150.00 SK50ER20-150 ER20 34 1.339 2.0-13 150 $160.00 SK50ER25-100 ER25 42 1.654 2.0-16 100 $150.00 SK50ER25-150 ER25 42 1.654 2.0-16 150 $160.00 SK50ER32-100 ER32 50 1.969 2.0-16 100 $150.00 SK50ER32-150 ER32 50 1.969 2.0-20 150 $160.00 SK50ER32-200 ER32 50 1.969 2.0-20 200 $220.00 SK50ER40-100 ER40 63 2.480 3.0-26 100 $160.00 SK50ER40-150 ER40 63 2.480 3.0-26 150 $190.00 DIN69893A DIN6499 HRC58-60 10,000RPM \ G6.3 HSK-A63-ER & Specification A (mm) A(in) D(mm) LIST PRICE HSK-A63-ER16-100 100 3.94 30 $235.00 HSK-A63-ER20-100 100 3.94 35 $235.00 HSK-A63-ER25-100 100 3.94 42 $235.00 HSK-A63-ER32-100 100 3.94 50 $235.00 HSK-A63-ER40-100 100 3.94 63 $245.00 HSK-A63-ER16-150 150 5.91 30 $245.00 HSK-A63-ER20-150 150 5.91 35 $245.00 HSK-A63-ER25-150 150 5.91 42 $260.00 HSK-A63-ER32-150 150 5.91 50 $260.00 HSK-A63-ER40-150 150 5.91 63 $266.00 HSK-A100-ER & Specification A(mm) A(in) D (mm) LIST PRICE HSK-A100-ER16-100 100 3.94 30 $465.00 HSK-A100-ER20-100 100 3.94 35 $465.00 HSK-A100-ER25-100 100 3.94 42 $465.00 HSK-A100-ER32-100 100 3.94 50 $465.00 HSK-A100-ER40-100 100 3.94 63 $485.00 HSK-A100-ER16-150 150 5.91 30 $485.00 HSK-A100-ER20-150 150 5.91 35 $485.00 HSK-A100-ER25-150 150 5.91 42 $485.00 HSK-A100-ER32-150 150 5.91 50 $485.00 HSK-A100-ER40-150 150 63 $497.00 BT40 ER Collet Chuck $104.00/ea. D D Range(in) L B4016ER2 ER16 0.039-0.393 2.50 B4020ER2 ER20 0.039-0.511 2.75 B4025ER5 ER25 0.078-0.591 5.90 B4032ER3 ER32 0.118-0.787 4.00 B4040ER3 ER40 0.118-1.024 3.94 Please visit our website at www.gromaxonline.com for more information, or shop online. page 182

CNC Tooling System EndMill Holder End Mill Holder BT40 End Mill Holder $64.00/ea. d (in.) L (in) d (in.) L (in) CAT40 End Mill Holder $64.00/ea. d (in.) L(in) C4001EM1.125 ( 1/8 ) 1.75 C4018EM1.188 ( 3/16 ) 1.75 C4018EM2.188 ( 3/16 ) 2.50 C4025EM1.250 ( 1/4 ) 1.75 C4025EM2.250 ( 1/4 ) 2.50 C4031EM1.312 ( 5/16 ) 1.75 C4037EM1.375 ( 3/8 ) 1.75 C4037EM2.375 ( 3/8 ) 2.50 C4043EM1.438 ( 7/16 ) 1.75 C4050EM1.500 ( 1/2 ) 1.75 B4018EM2 0.188 2.25 B4025EM2 0.250 2.25 B4031EM2 0.312 2.25 B4037EM2 0.375 2.25 B4043EM2 0.438 2.25 B4050EM1 0.500 1.75 B4050EM5 B4056EM2 0.562 2.25 B4062EM1 0.625 1.75 B4062EM2 B4065EM1 SK (DIN 69871-1) End Mill Holder B4075EM1 0.750 1.75 B4075EM2 B4087EM3 0.875 3.75 B4010EM1 1.000 1.75 B4010EM3 B4012EM2 1.250 2.00 B4012EM3 B4015EM4 1.500 4.00 C4050EM2.500 ( 1/2 ) 2.62 C4056EM1.562 ( 9/16 ) 1.75 C4062EM1.625 ( 5/8 ) 1.75 C4062EM3.625 ( 5/8 ) 3.00 C4075EM1.750 ( 3/4 ) 1.75 C4075EM3.750 ( 3/4 ) 3.00 C4087EM1.875 ( 7/8 ) 1.75 C4087EM3.875 ( 7/8 ) 3.50 C4010EM1 1.00 ( 1 ) 1.75 C4010EM3 1.00 ( 1 ) 3.00 C4010EM4 1.00 ( 1 ) 4.00 C4012EM2 1.25 ( 1 1/4 ) 2.00 C4012EM4 1.25 ( 1 1/4 ) 4.00 C4015EM4 1.50 ( 1 1/2 ) 4.00 CAT50 End Mill Holder $82.00/ea. d (inch) L C5018EM2.188 ( 3/16 ) 2.50 C5025EM2.250 ( 1/4 ) 2.50 C5031EM2.312 ( 5/16 ) 2.50 C5037EM2.375 ( 3/8 ) 2.50 C5043EM2.438 ( 7/16 ) 2.62 unit: (mm) Fig. L d D H1 H2 G SK40-SL08-50 1 50 8 28 18 M8X1.0 $60.00 SK40-SL08-100 1 100 8 28 18 M8X1.0 $70.00 SK40-SL08-130 1 130 8 28 18 M8X1.0 $90.00 SK40-SL10-50 1 50 10 35 20 M10X1.0 $60.00 SK40-SL12-50 1 50 12 42 23 M12X.5 $60.00 SK40-SL12-100 1 100 12 42 23 $70.00 SK40-SL16-60 1 60 16 48 24 M14X1.5 $60.00 SK40-SL20-70 1 70 20 48 25 M16X1.5 $60.00 SK40-SL20-130 1 130 20 48 25 M16X1.5 $90.00 SK40-SL25-100 2 100 25 62 24 25 M18X2.0 $70.00 SK40-SL32-100 2 100 32 63 24 28 M20X2.0 $70.00 SK50-SL08-63 1 63 8 28 18 M8X1.0 $120.00 SK50-SL10-63 1 63 10 35 20 M10X1.0 $120.00 SK50-SL12-63 1 63 12 42 M12X1.5 $120.00 SK50-SL16-63 1 63 16 48 24 M14X1.5 $120.00 SK50-SL20-63 1 63 20 52 25 M16X1.5 $120.00 SK50-SL25-80 2 80 25 65 24 25 M18X2.0 $120.00 SK50-SL32-100 2 100 32 72 24 28 M20X2.0 $130.00 SK50-SL40-120 2 120 40 90 30 32 M20X2.0 $140.00 HSK (DIN 69893A) End Mill Holder C5050EM2.500 ( 1/2 ) 2.62 C5056EM2.562 ( 9/16 ) 2.62 C5062EM3.625 ( 5/8 ) 3.75 C5075EM3.750 ( 3/4 ) 3.75 C5087EM3.875 ( 7/8 ) 3.75 C5010EM4 1.00 ( 1 ) 4.00 C5012EM4 1.25 ( 1 1/4 ) 4.00 CAT40 End Mill Holder (Metric) $82.00/ea. d (mm) L C40M06EM2 6 2.50 C40M08EM2 8 2.50 C40M10EM2 10 2.50 C40M12EM2 12 2.62 C40M14EM2 14 2.62 C40M16EM2 16 2.75 C40M20EM3 20 3.50 C40M25EM4 25 4.00 C40M32EM4 32 4.00 unit: (mm) DIN69893A DIN1835 HRC58-60 10,000RPM \ G6.3 Fig. L d D H1 H2 G HSKA63SL10-80 1 80 10 35 20 M10X1.0 $219.00 HSKA63SL12-90 1 90 12 42 23 M12X.5 $209.00 HSKA63SL14-90 1 90 14 45 23 $209.00 HSKA63SL16-100 1 100 16 48 24 M14X1.5 $209.00 HSKA63SL18-100 1 100 18 50 24 $209.00 HSKA63SL20-100 1 100 20 52 25 M16X1.5 $209.00 HSKA63SL25-110 2 110 25 62 24 25 M18X2.0 $209.00 HSKA63SL32-110 2 110 32 63 24 28 M20X2.0 $209.00 HSKA100SL10-80 1 80 10 35 20 M10X1.0 $440.00 HSKA100SL12-90 1 90 12 42 23 M12X1.5 $440.00 HSKA100SL16-100 1 100 16 48 24 M14X1.5 $440.00 HSKA100SL20-100 1 100 20 52 25 M16X1.5 $440.00 HSKA100SL25-110 2 110 25 64 24 25 M18X2.0 $440.00 HSKA100SL32-110 2 110 32 72 24 28 M20X2.0 $463.00 HSKA100SL40-120 2 120 40 80 30 32 M20X2.0 $463.00 page 183

CNC Tooling System Wer Tapping Holder WER Tapping Attachment WER-CAT Style Collet L D Tapping (mm) (inch) (mm) (inch) CAT40WER16L70 ER16 70 2.756 28 1.102 M3-M10 $190.00 CAT40WER20L90 ER20 90 3.543 34 1.339 M3-M13 $190.00 CAT40WER25L100 ER25 100 3.937 42 1.654 M3-M16 $190.00 CAT40WER32L110 ER32 110 4.331 50 1.969 M3-M20 $190.00 CAT50WER16L90 ER16 90 3.543 28 1.102 M3-M10 $250.00 CAT50WER20L90 ER20 90 3.543 34 1.339 M3-M13 $250.00 CAT50WER25L90 ER25 90 3.543 42 1.654 M3-M16 $260.00 CAT50WER32L90 ER32 90 3.543 50 1.969 M3-M20 $265.00 WER-BT (MAS 403)Style Collet L D Tapping (mm) (inch) (mm) (inch) BT30WER16L90 ER16 90 3.543 30 1.181 $170.00 BT30WER20L100 ER20 100 3.937 34 1.339 $180.00 BT40WER16L90 ER16 90 3.543 28 1.102 M3-M10 $210.00 BT40WER20L100 ER20 100 3.937 34 1.339 M3-M13 $210.00 BT40WER25L110 ER25 110 4.331 42 1.654 M3-M16 $220.00 BT40WER32L120 ER32 120 4.724 50 1.969 M3-M20 $225.00 BT50WER16L90 ER16 90 3.543 28 1.102 M3-M10 $250.00 BT50WER20L100 ER20 100 3.937 34 1.339 M3-M13 $250.00 BT50WER25L110 ER25 110 4.331 42 1.654 M3-M16 $250.00 BT50WER32L120 ER32 120 4.724 50 1.969 M3-M20 $265.00 WER-SK(DIN69871-1) Style Collet L D (mm) (inch) (mm) (inch) SK40WER16L70 ER16 70 2.756 30 1.181 $170.00 SK40WER20L90 ER20 90 3.543 34 1.339 $180.00 SK40WER25L100 ER25 100 3.937 42 1.654 $180.00 SK40WER32L110 ER32 110 4.331 50 1.969 $190.00 SK50WER16L90 ER16 90 3.543 30 1.181 $240.00 SK50WER20L90 ER20 90 3.543 34 1.339 $240.00 SK50WER25L90 ER25 90 3.543 42 1.654 $260.00 SK50WER32L100 ER32 100 3.937 50 1.969 $270.00 WER-Side Lock Straight Type Chuck D1 L D2 Collet mm inch mm inch mm inch Type SL20WER16-80 20 0.787 80 3.150 30 1.181 ER16 $160.00 SL20WER20-80 20 0.787 80 3.150 34 1.339 ER20 $160.00 SL25WER16-80 25 0.984 80 3.150 30 1.181 ER16 $160.00 SL25WER20-81 25 0.984 80 3.150 34 1.339 ER20 $160.00 SL25WER25-82 25 0.984 80 3.150 42 1.654 ER25 $180.00 SL32WER25-80 32 1.260 80 3.150 42 1.654 ER25 $180.00 SL32WER32-80 32 1.260 80 3.150 50 1.969 ER32 $190.00 WER-BC Straight Type Chuck D1 L D2 Collet mm inch mm inch mm inch Type BC20WER16-130 20 0.787 130 5.118 30 1.181 ER16 $160.00 BC20WER20-130 20 0.787 130 5.118 34 1.339 ER20 $160.00 BC25WER16-130 25 0.984 130 5.118 30 1.181 ER16 $160.00 BC25WER20-130 25 0.984 130 5.118 34 1.339 ER20 $160.00 BC25WER25-130 25 0.984 130 5.118 42 1.654 ER25 $180.00 BC32WER25-130 32 1.260 130 5.118 42 1.654 ER25 $180.00 BC32WER32-130 32 1.260 130 5.118 50 1.969 ER32 $190.00 page 184

CNC Tooling System Retension Stud Morse Taper holder MT No. D CAT Shank Morse Taper# L D mm inch mm inch CAT30MT1L45 1 45 1.772 25 0.984 $78.00 CAT30MT2L60 2 60 2.362 32 1.260 $78.00 CAT30MT3L80 3 80 3.150 40 1.575 $83.00 CAT40MT1L45 1 45 1.772 25 0.984 $78.00 CAT40MT1L120 1 120 4.724 25 0.984 $106.00 CAT40MT2L45 2 45 1.772 32 1.260 $78.00 CAT40MT2L60 2 60 2.362 32 1.260 $78.00 CAT40MT2L120 2 120 4.724 32 1.260 $106.00 CAT40MT3L75 3 75 2.953 40 1.575 $83.00 CAT40MT3L135 3 135 5.315 40 1.575 $116.00 CAT40MT4L90 4 90 3.543 50 1.969 $95.00 CAT50MT1L45 1 45 1.772 25 0.984 $130.00 CAT50MT1L120 1 120 4.724 25 0.984 $155.00 CAT50MT2L45 2 45 1.772 32 1.260 $127.00 CAT50MT2L135 2 135 5.315 32 1.260 $162.00 CAT50MT3L45 3 45 1.772 40 1.575 $127.00 CAT50MT3L150 3 150 5.906 40 1.575 $162.00 CAT50MT4L75 4 75 2.953 50 1.969 $134.00 CAT50MT4L180 4 180 7.087 50 1.969 $148.00 CAT50MT5L105 5 105 4.134 65 2.559 $148.00 BT Shank Morse Taper# MT No. L D mm inch mm inch BT30MT1L45 1 45 1.772 25 0.984 $78.00 BT30MT2L60 2 60 2.362 32 1.260 $78.00 BT30MT3L80 3 80 3.150 40 1.575 $83.00 BT40MT1L45 1 45 1.772 25 0.984 $78.00 BT40MT1L120 1 120 4.724 25 0.984 $106.00 BT40MT2L45 2 45 1.772 32 1.260 $78.00 BT40MT2L60 2 60 2.362 32 1.260 $78.00 BT40MT2L120 2 120 4.724 32 1.260 $106.00 BT40MT3L75 3 75 2.953 40 1.575 $83.00 BT40MT3L135 3 135 5.315 40 1.575 $116.00 BT40MT4L90 4 90 3.543 50 1.969 $95.00 BT50MT1L45 1 45 1.772 25 0.984 $130.00 BT50MT1L120 1 120 4.724 25 0.984 $155.00 BT50MT2L45 2 45 1.772 32 1.260 $127.00 BT50MT2L135 2 135 5.315 32 1.260 $162.00 BT50MT3L45 3 45 1.772 40 1.575 $127.00 BT50MT3L150 3 150 5.906 40 1.575 $162.00 BT50MT4L75 4 75 2.953 50 1.969 $134.00 BT50MT4L180 4 180 7.087 50 1.969 $148.00 BT50MT5L105 5 105 4.134 65 2.559 $148.00 D L L 7/24 7/24 MTA SK (DIN69871-1) Morse Taper Holders MT L D No. mm inch mm inch SK30MTA1-45 1 78 3.071 25 0.984 $60.00 SK30MTA2-60 2 60 2.362 32 1.260 $60.00 SK30MTA3-80 3 80 3.150 40 1.575 $80.00 SK40MTA1-45 1 45 1.772 25 0.984 $60.00 SK40MTA1-120 1 120 4.724 25 0.984 $100.00 SK40MTA2-60 2 60 2.362 32 1.260 $60.00 SK40MTA2-120 2 120 4.724 32 1.260 $100.00 SK40MTA3-75 3 75 2.953 40 1.575 $100.00 SK40MTA3-135 3 135 5.315 40 1.575 $100.00 SK40MTA4-90 4 90 3.543 50 1.969 $100.00 SK50MTA1-45 1 45 1.772 25 0.984 $130.00 SK50MTA1-120 1 120 4.724 25 0.984 $160.00 SK50MTA2-45 2 45 1.772 32 1.260 $130.00 SK50MTA2-135 2 135 5.315 32 1.260 $160.00 SK50MTA3-45 3 45 1.772 40 1.575 $130.00 SK50MTA3-150 3 150 5.906 40 1.575 $180.00 SK50MTA4-75 4 75 2.953 50 1.969 $130.00 SK50MTA4-180 4 180 7.087 50 1.969 $180.00 SK50MTA5-105 5 105 4.134 65 2.559 $160.00 SK50MTA5-190 5 190 7.480 65 2.559 $190.00 MTA NT Morse Taper Holders MT L D G No. mm inch mm inch NT50MTA1-45 1 45 1.772 25 0.984 $130.00 NT50MTA1-120 1 120 4.724 25 0.984 $160.00 NT50MTA2-45 2 45 1.772 32 1.260 $130.00 NT50MTA2-135 2 135 5.315 32 1.260 1-8UNC $160.00 NT50MTA3-45 3 45 1.772 40 1.575 $130.00 NT50MTA3-150 3 150 5.906 40 1.575 $160.00 NT50MTA4-75 4 75 2.953 50 1.969 $130.00 NT50MTA4-190 4 190 7.480 50 1.969 $160.00 MTA HSK (DIN69893A) Morse Taper Holder MTA DIN2080 Morse Taper Holders MT L D G No. mm inch mm inch DIN208040MTA2-45 2 45 1.772 32 1.260 M16X2.0 $70.00 DIN208040MTA3-75 3 75 2.953 40 1.575 M16X2.0 $95.00 DIN208050MTA2-45 2 45 1.772 32 1.260 M24X3.0 $130.00 DIN208050MTA3-45 3 45 1.772 40 1.575 M24X3.0 $130.00 DIN208050MTA4-75 4 75 2.953 50 1.969 M24X3.0 $130.00 MT L D No. mm inch mm inch HSKA63MTA1-100 1 100 3.937 25 0.984 $232.00 HSKA63MTA2-120 2 120 4.724 35 1.378 $232.00 HSKA63MTA3-140 3 140 5.512 40 1.575 $245.00 HSKA63MTA4-160 4 160 6.299 50 1.969 $245.00 HSKA100MTA1-110 1 110 4.331 25 0.984 $452.00 HSKA100MTA2-120 2 120 4.724 35 1.378 $452.00 HSKA100MTA3-150 3 150 5.906 40 1.575 $463.00 HSKA100MTA4-170 4 170 6.693 50 1.969 $463.00 HSKA100MTA5-200 5 200 7.874 65 2.559 $488.00 DIN69893A DIN228-B HRC58-60 10,000RPM \ G6.3 page 185

CNC Tooling System Shell Mill/ TG/ Jacobs Holder Shell Mill Holder SHELL ENDMILL HOLDER for HSK Holder CAT40 Shell Mill Holder $93.00/ea. D L Drive Key Thread Lock Screw C4075SM1 0.750 1.38 0.31 3/8-24 75LS C4010SM2 1.000 2.00 0.38 1/2-20 10LS C4012SM2 1.250 2.25 0.50 5/8-18 12LS C4015SM2 1.500 2.40 0.62 3/4-16 15LS CAT50 Shell Mill Holder $114.00/ea. D L Drive Key Thread Lock Screw C5075SM13 0.750 1.50 0.31 3/8-24 75LS C5010SM2 1.000 2.00 0.38 1/2-20 10LS C5012SM1 1.250 1.50 0.50 5/8-18 12LS C5015SM2 1.500 2.40 0.62 3/4-16 15LS BT40 Shell Mill Holder $93.00/ea. D L Drive Key Thread Lock Screw B4075SM1 0.750 1.75 0.31 3/8-24 75LS B4010SM2 1.000 2.00 0.38 1/2-20 10LS B4012SM2 1.250 2.25 0.50 5/8-18 12LS B4015SM2 1.500 2.25 0.62 3/4-16 15LS TG Collet Holder CAT40 TG Collet Chuck Collet Series D Range(in) L C4010SC3 100 0.013-1.000 3.00 $84.00 CAT50 TG Collet Chuck Collet Series D Range(in) L C5010SC3 100 0.093-1.000 3.00 $110.00 DIN69893A HRC58-60 10,000RPM \ G6.3 HSK-A63-FM &Specification A D LIST PRICE HSK-A63-FMB22-50 50 48 $235.00 HSK-A63-FMB27-60 60 60 $235.00 HSK-A63-FMB32-60 60 72 $255.00 HSK-A63-FMB40-60 60 80 $255.00 HSK-A63-FMB22-120 120 48 $243.00 HSK-A63-FMB27-120 120 60 $243.00 HSK-A63-FMB32-120 120 72 $266.00 HSK-A63-FMB40-120 60 80 $266.00 HSK-A100-FM &Specification A D LIST PRICE HSK-A100-FMB22-50 50 48 $440.00 HSK-A100-FMB27-60 60 60 $440.00 HSK-A100-FMB32-60 60 72 $451.00 HSK-A100-FMB40-60 60 80 $451.00 HSK-A100-FMB22-120 120 48 $463.00 HSK-A100-FMB27-120 120 60 $463.00 HSK-A100-FMB32-120 120 72 $463.00 HSK-A100-FMB40-120 120 80 $488.00 HSK-A63-FM &Specification A D LIST PRICE HSK-A63-FMA25.4-60 60 50 $235.00 HSK-A63-FMA31.75-60 60 60 $235.00 HSK-A63-FMA38.1-60 60 80 $255.00 HSK-A63-FMA25.4-120 120 50 $245.00 HSK-A63-FMA31.75-120 120 60 $245.00 HSK-A63-FMA38.1-120 120 80 $266.00 HSK-A100-FM &Specification A D LIST PRICE HSK-A100-FMA25.4-60 50 50 $440.00 HSK-A100-FMA31.75-60 60 60 $440.00 HSK-A100-FMA31.8-60 60 80 $463.00 HSK-A100-FMA50.8-60 60 100 $463.00 HSK-A100-FMA25.4-120 120 50 $463.00 HSK-A100-FMA31.75-120 120 60 $463.00 HSK-A100-FMA31.8-120 120 80 $475.00 HSK-A100-FMA50.8-120 120 100 $486.00 HSK HOLDER / KPU DRILL CHUCK HOLDER HSK HOLDER / TEST BAR BT40 TG Collet Chuck Collet Series D Range L B4010SC3 100 0.093-1.000 3.00 $93.00 Jacobs Taper Holder CAT40 Jacobs Taper Holder $76.00/ea. Jacobs D L (inch) Taper (inch) C4020JT1 2 0.559 1.50 C4033JT1 33 0.624 1.50 C4003JT1 3 0.811 1.50 C4004JT1 4 1.124 1.50 C4006JT1 6 0.676 1.50 DIN69893A DIN1835 10,000RPM \ G6.3 HSK-A63-KPU HRC58-60 &Specifi cation A D LIST PRICE HSK-A63-KPU13 135 45 $290.00 HSK-A100-KPU &Specifi cation A D LIST PRICE HSK-A100-KPU13 135 45 $556.00 DIN69893A HRC58-60 HSK-A63-TB & Specifi cation A D LIST PRICE HSK-A63-TB-200 200 40 $350.00 HSK-A100-TB & Specifi cation A D LIST PRICE HSK-A100-TB-200 200 40 $463.00 page 186

CNC Tooling System Retension Stud Retention Stud CAT Style H: w/ Coolant Hole Taper N D L1 L Flange A (in) (in) (in) (in) Thick. C409001 CAT-40 5/8-11 0.392 0.589 0.775 1.052 0.236 90 $12.00 C404501 CAT-40 5/8-11 0.392 0.589 0.989 1.265 0.236 45 $12.00 C404501H CAT-40 5/8-11 0.392 0.589 0.989 1.265 0.236 45 $14.00 C404502 CAT-40 5/8-11 0.392 0.589 0.989 1.265 0.125 45 $12.00 C404502H CAT-40 5/8-11 0.392 0.589 0.989 1.265 0.125 45 $15.00 C404503 $12.00 C404503H $15.00 C404504 $12.00 C404504H $15.00 C406000 CAT-40 5/8-11 0.392 0.589 0.989 1.265 0.236 60 $12.00 C406000H CAT-40 5/8-11 0.392 0.589 0.989 1.265 0.236 60 $15.00 C409000 CAT-40 5/8-11 0.392 0.589 0.989 1.265 0.236 90 $12.00 C409000H CAT-40 5/8-11 0.392 0.589 0.989 1.265 0.236 90 $15.00 C404500 CAT-40 5/8-11 0.490 0.740 0.440 0.640 0.120 45 $12.00 C404500H CAT-40 5/8-11 0.490 0.740 0.440 0.640 0.120 45 $15.00 C407500 CAT-40 5/8-11 0.549 0.747 0.792 1.030 0.280 75 $12.00 C407500H CAT-40 5/8-11 0.549 0.747 0.792 1.030 0.280 75 $15.00 C407551H CAT-40 5/8-11 0.549 0.747 0.787 1.023 0.157 75 $15.00 C504501 CAT-50 1-8 0.667 0.904 1.384 1.779 0.390 45 $14.00 C504501H CAT-50 1-8 0.667 0.904 1.384 1.779 0.390 45 $17.00 C506000 CAT-50 1-8 0.667 0.904 1.384 1.771 0.390 60 $14.00 C506000H CAT-50 1-8 0.667 0.904 1.384 1.771 0.390 60 $17.00 C509000 CAT-50 1-8 0.667 0.904 1.384 1.771 N/A 90 $14.00 C509000H CAT-50 1-8 0.667 0.904 1.384 1.771 0.390 90 $17.00 C504500 $14.00 C504500H CAT-50 1-8 0.820 1.140 0.700 1.771 0.390 45 $17.00 Retention Stud JIS B6339 Retention Stud DIN69872 BT Style (Metric Thread) H: w/ Coolant Hole Taper N D L1 L Flange A (in) (in) (in) (in) Thick. B304500 BT-30 M12-1.75 0.276 0.433 0.709 0.905 0.197 45 $11.00 B306000 BT-30 M12-1.75 0.276 0.433 0.709 0.905 0.197 60 $11.00 B354500 BT-35 M12-1.75 0.330 0.540 0.885 1.102 0.157 45 $11.00 B356000 BT-35 M12-1.75 0.350 0.540 0.885 1.102 0.192 60 $11.00 B359001 BT-35 M12-1.75 0.310 0.550 0.788 0.900 0.190 90 $11.00 B404500 BT-40 M16-2 0.392 0.589 1.101 1.377 0.236 45 $11.00 B404500H BT-40 M16-2 0.392 0.589 1.101 1.377 0.236 45 $13.31 B406000 BT-40 M16-2 0.392 0.589 1.101 1.377 0.236 60 $11.00 B406000H BT-40 M16-2 0.392 0.589 1.101 1.377 0.236 60 $13.31 B409000 BT-40 M16-2 0.392 0.589 1.101 1.377 0.236 90 $11.00 B409000H BT-40 M16-2 0.392 0.589 1.101 1.377 0.236 90 $13.31 B404503 BT-40 M16-2 0.490 0.740 0.440 0.640 0.120 45 $8.69 B404501 BT-40 M16-2 0.490 0.740 0.550 0.775 0.240 45 $11.77 B407500 BT-40 M16-2 0.549 0.746 0.903 1.143 0.275 75 $11.00 B407500H BT-40 M16-2 0.549 0.746 0.903 1.143 0.275 75 $13.31 B407501H BT-40 M16-2 0.550 0.750 0.788 1.023 0.157 75 $13.31 B454500 BT-45 M20-2.5 0.550 0.750 1.220 1.574 0.310 45 $15.00 B456000 BT-45 M20-2.5 0.550 0.750 1.220 1.574 0.310 60 $15.00 B459000 BT-45 M20-2.5 0.550 0.750 1.220 1.574 0.310 90 $15.00 B504500 BT-50 M24-3 0.667 0.906 1.392 1.771 0.394 45 $17.00 B504500H BT-50 M24-3 0.667 0.906 1.392 1.771 0.394 45 $21.00 B506000 BT-50 M24-3 0.667 0.906 1.392 1.771 0.394 60 $17.00 B506000H BT-50 M24-3 0.667 0.906 1.392 1.771 0.394 60 $21.00 B509000 BT-50 M24-3 0.667 0.906 1.392 1.771 0.394 90 $17.00 B509000H BT-50 M24-3 0.667 0.906 1.392 1.771 0.394 90 $21.00 L L1 D1 D2 D3 D4 D5 G SW JISB6339-40P 54 29 19 14 23 17 7 75 M16 19 $10.00 JISB6339-50P 74 34 28 21 38 25 10 75 M24 30 $20.00 JISB6339-40PA 54 26 19 14 23 17 7 75 M16 19 $10.00 JISB6339-50PA 74 34 28 21 36 25 11.5 75 M24 30 $20.00 JISB6339-40PB 44.5 16.4 18.95 12.95 22.5 17 7.35 45 M16 18 $10.00 JISB6339-50PB 65.5 25.5 29.1 19.6 37 25 11.55 45 M24 30 $20.00 L L1 D1 D2 D3 D4 D5 G SW DIN69872S-SK40 54 26 19 14 23 17 7 75 M16 19 $10.00 DIN69872S-SK50 74 34 28 21 38 25 11.5 75 M24 30 $20.00 Retention Stud MAZAK-BT L L1 D1 D2 D3 D4 D5 G SW MAZAK-BT40 44.1 19.1 18.8 12.45 22 17 7 45 M16 19 $10.00 MAZAK-BT50 65.2 25.2 28.96 20.83 37 25 10 75 M24 30 $20.00 Retention Stud MTB Fig. L L1 D1 D2 D3 D4 G SW MTB-BT30 1 86 23 11 7 16.5 12.5 45 M12 13 $20.00 MTB-BT40 1 115 35 15 10 23 17 45 M16 19 $20.00 MTB-SK40 2 109 26 19 14 23 17 75 M16 19 $20.00 page 187

CNC Tooling System Face/ End Mill S45SE12 SHELL END MILLS SP4000 FACE MILLS Inserts are not included MODEL D H d2 d d I No. (mm) (inch) 50A04R-S45SE12 50 40 64 22 4 $91.00 63A05R-S45SE12 63 40 77 22 1 5 $95.00 80B06R-S45SE12 80 50 93 27 1 6 $108.00 100B06R-S45SE12 100 50 114 32 1 1/4 6 $162.00 125B07R-S45SE12 125 60 139 40 1 1/2 7 $258.00 Inserts are not included MODEL D H d d I No. (mm) (inch) R L SP4080R/L 80 50 27 1 5 $132.00 $172.00 SP4100R/L 100 55 32 1 1/4 6 $218.00 $283.00 SP4125R/L 125 55 40 1 1/4 8 $240.00 $310.00 SP4160R/L 160 60 40 2 10 $299.00 $388.00 SP4200R/L 200 60 60 1 7/8 14 $498.00 $647.00 SP4250R/L 250 65 60 1 7/8 16 $696.00 $905.00 SP4315R/L 315 65 60 1 7/8 18 $907.00 $1179.00 SP4360R/L 360 65 60 1 7/8 20 $1133.00 $1473.00 SPC4000 FACE MILLS NSP4000 FACE MILLS Inserts are not included MODEL D H d d I No. (mm) (inch) SPC4050 50 46 22 3 $62.00 SPC4063 63 46 27 1 4 $70.00 SPC4075 75 46 27 1 5 $76.00 SPC4100 100 50 32 1 1/4 6 $102.00 SF50000 FACE MILLS Inserts are not included MODEL D H d d I No. (mm) (inch) NSP4080R 80 50 27 1 5 $102.00 NSP4100R 100 55 32 1 1/4 6 $127.00 NSP4125R 125 55 40 1 1/4 8 $200.00 NSP4160R 160 60 40 2 10 $254.00 NSP4200R 200 60 60 1 7/8 14 $434.00 NSP4250R 250 65 60 1 7/8 16 $651.00 NSP4315R 315 65 60 1 7/8 18 $905.00 NSP4360R 360 65 60 1 7/8 20 $1085.00 SP5000 FACE MILLS MODEL D D1 H d d I No. (mm) (inch) R L SF5063R/L 63 59 50 27 1 4 $99.00 $.128.00 SF5080R/L 80 96 50 27 1 5 $102.00 $133.00 SF5100R/L 100 116 50 32 1 1/4 6 $128.00 $166.00 SF5125R/L 125 141 65 40 1 1/4 6 $200.00 $260.00 SF5160R/L 160 176 65 40 2 7 $254.00 $330.00 SN4000 FACE MILLS Inserts are not included Inserts are not included MODEL D H d d I No. (mm) (inch) SP5080R 80 50 27 1 4 $112.00 SP5100R 100 55 32 1 1/4 5 $140.00 SP5125R 125 55 40 1 1/4 6 $220.00 SP5160R 160 60 40 2 8 $295.00 SP5200R 200 60 60 1 7/8 10 $478.00 SP5250R 250 65 60 1 7/8 12 $717.00 SP5315R 315 65 60 1 7/8 14 $994.00 SP5360R 360 65 60 1 7/8 16 $1193.00 MKR-SP4-15 FACE MILLS Inserts are not included MODEL D H d d I No. (mm) (inch) R L SN4080R/L 80 50 27 1 5 $132.00 $172.00 SN4100R/L 100 55 32 1 1/4 6 $218.00 $283.00 SN4125R/L 125 55 40 1 1/4 8 $240.00 $310.00 SN4160R/L 160 60 40 2 10 $299.00 $388.00 SN4200R/L 200 60 60 1 7/8 14 $498.00 $647.00 SN4250R/L 250 65 60 1 7/8 16 $696.00 $905.00 SN4315R/L 315 65 60 1 7/8 18 $907.00 $1179.00 SN4360R/L 360 65 60 1 7/8 20 $1133.00 $1473.00 Inserts are not included MODEL D H d d I No. (mm) (inch) MKR63-SP4-15 63 46 27 1 5,6 $155.00 MKR80-SP4-15 80 50 27 1 6,8 $186.00 MKR100-SP4-15 100 50 32 1 1/4 8,10 $244.00 MKR125-SP4-15 125 55 40 1 1/2 10,12 $310.00 MKR160-SP4-15 160 55 40 2 12,14 $378.00 MKR200-SP4-15 200 60 60 1 7/8 16,18 $620.00 page 188

MKR-SP4-45 FACE MILLS SE445 FACE MILLS CNC Tooling System Face/ End Mill STP4000 FACE MILLS Inserts are not included MODEL D H d (mm) d (in) I No. MKR63-SP4-45 63 46 27 1 5, 6 MKR80-SP4-45 80 50 27 1 6, 8 MKR100-SP4-45 100 50 32 1 1/4 MKR125-SP4-45 125 55 40 1 1/2 8, 10 10, 12 MKR160-SP4-45 160 55 40 2 12, 14 MKR200-SP4-45 200 60 60 1 7/8 SE545 FACE MILLS 16, 18 $155.00 $186.00 $243.00 $310.00 $378.00 $620.00 Inserts are not included MODEL D H d (mm) d (in) I No. SE445R6304 63 46 27 1 4 $112.00 SE445R0304 80 50 27 1 4 $120.00 SE445R0405 100 55 32 1 1/4 5 $140.00 SE445R0506 125 55 40 1 1/2 6 $220.00 SE445R0608 160 60 40 2 8 $295.00 SE445R0810 200 60 60 1 7/8 10 $478.00 SE445R1012 250 65 60 1 7/8 12 $717.00 SE445R1214 315 65 60 1 7/8 14 $994.00 SE445R1416 360 65 60 1 7/8 16 $1193.00 SE445R0306 80 50 27 1 6 $161.00 SE445R0407 100 55 32 1 1/4 7 $161.00 SE445R0509 125 55 40 1 1/2 9 $252.00 SE445R0611 160 60 40 2 11 $339.00 SE445R0814 200 60 60 1 7/8 14 $549.00 SE445R1018 250 65 60 1 7/8 18 $824.00 SE445R1222 315 65 60 1 7/8 22 $1143.00 SE445R1426 360 65 60 1 7/8 26 $1372.00 Inserts are not included MODEL D H d (mm) d (in) I No. STP4100R 100 55 32 1 1/4 6 $200.00 STP4125R 125 55 40 1 1/2 8 $272.00 STP4160R 160 60 40 2 10 $338.00 STP4200R 200 60 60 1 7/8 14 $565.00 STP4250R 250 65 60 1 7/8 16 $756.00 STP4315R 315 65 60 1 7/8 18 $945.00 STP4360R 360 65 60 1 7/8 20 $1320.00 MTP4000 FACE MILLS Inserts are not included MODEL D H d (mm) d (in) I No. SE545R0304 80 50 27 1 4 $112.00 SE545R0405 100 55 32 1 1/4 5 $140.00 SE545R0506 125 55 40 1 1/2 6 $220.00 SE545R0608 160 60 40 2 8 $295.00 SE545R0810 200 60 60 1 7/8 10 $478.00 SE545R1012 250 65 60 1 7/8 12 $717.00 SE545R1214 315 65 60 1 7/8 14 $994.00 SE545R1416 360 65 60 1 7/8 16 $1193.00 SE545R0407 100 55 32 1 1/4 7 $161.00 SE545R0509 125 55 40 1 1/2 9 $252.00 SE545R0611 160 60 40 2 11 $339.00 SE545R0814 200 60 60 1 7/8 14 $549.00 SE545R1018 250 65 60 1 7/8 18 $824.00 SE545R1222 315 65 60 1 7/8 22 $1143.00 SE545R1426 360 65 60 1 7/8 26 $1372.00 MTE4000 FACE MILLS Inserts are not included MODEL D H d (mm) d (in) I No. MTE4080R 80 50 27 1 4 $134.00 MTE4100R 100 55 32 1 1/4 5 $168.00 MTE4125R 125 55 40 1 1/4 6 $263.00 MTE4160R 160 60 40 2 8 $354.00 MTE4200R 200 60 60 1 7/8 12 $573.00 Inserts are not included MODEL D H d (mm) d (in) I No. MTP4080R 80 50 27 1 5 $117.00 MTP4100R 100 55 32 1 1/4 6 $140.00 MTP4125R 125 55 40 1 1/4 8 $220.00 MTP4160R 160 60 40 2 10 $295.00 MTP4200R 200 60 60 1 7/8 14 $478.00 MTP4250R 250 65 60 1 7/8 16 $717.00 MTP4315R 315 65 60 1 7/8 18 $994.00 MTP4360R 360 65 60 1 7/8 20 $1193.00 MS00T22S SHELL END MILLS MS00S SHELL END MILLS MS00T SHELL END MILLS Inserts are not included Inserts are not included MODEL D H d d I No. (mm) (inch) MS50S 50 46 22 7/8 3 $60.00 MS63S 63 46 27 1 4 $66.00 MS75S 75 46 27 1 5 $74.00 MS100S 100 50 32 1 1/4 6 $99.00 Inserts are not included MODEL D H d d I No. (mm) (inch) MS50T 50 46 22 7/8 3 $68.00 MS63T 63 46 27 1 4 $75.00 MS75T 75 46 27 1 5 $96.00 MS100T 100 50 32 1 1/4 6 $128.00 page 189 MODEL D H d (mm) d (in) I No. MS63T22S 63 50 27 1 3 $78.00 MS80T22S 80 50 27 1 4 $88.00 MS100T22S 100 50 32 1 1/4 5 $109.00 MS125T22S 125 63 40 1 1/2 6 $174.00

Machine Shop Supply Collet, Drill Chuck GROMAX CNC Keyless Drill Chuck with Shank The shank and keyless drill chuck are combined as one body and prevent falling out as heavy cutting; Prevent from falling out with instant spindle stop; Short and compact design BT NT 100% Inspection for Run Out Accuracy Cap. D L Runout (inch) 1/16-5/16 0.118 1.378 0.236 0.315 1.968 1/64-1/2 0.197 2.165 0.394.00196 0.512 2.953 1/8-5/8 0.197 2.156 0.394 0.630 3.150 GROMAX Super AccurateKeyless Drill Chuck Classic Plus Keyless Drill Chuck w/ R8 Integral Shank INT13C.R8 $153.00 0~1/2,3.2 Lbs INT16C.R8 $215.00 1/8~5/8,3.2 Lbs CP130-R8 $454.00 1/32 ~1/2 (1mm~13mm) 2.6 Lbs, 7000rpm CAT Mounting Taper K inch A D BT 20001 30 0-5/16 2.96 1.42 $231.00 20004 40 0-1/2 3.75 1.98 $237.00 20005 40 1/8-5/8 4.46 2.25 $253.00 20009 50 1/8-5/8 4.35 2.25 $303.00 NT 21001 30 0-5/16 2.77 1.42 $231.00 21004 40 0-1/2 3.36 1.98 $237.00 21005 40 1/8-5/8 4.15 2.25 $253.00 21009 50 1/8-5/8 3.95 2.25 $303.00 CAT 24001 30 0-5/16 4.03 1.42 $231.00 24004 40 0-1/2 3.95 1.98 $237.00 24005 40 1/8-5/8 4.93 2.25 $226.00 24008 50 0-1/2 4.03 1.98 $281.00 24009 50 1/8-5/8 4.15 2.25 $303.00 Wrench-Lock CNC Drill Chuck BT Max inch mm rpm WL130BT40 1/32-1/2 1~13 6500 $530.00 WL160BT40 1/16~5/8 1.5~16 6500 $598.00 WL160BT50 1/16~5/8 1.5~16 6500 $696.00 CAT WL130CAT4 1/32-1/2 1~13 6500 $530.00 WL160CAT4 1/16~5/8 1.5~16 6500 $598.00 WL160CAT5 1/16~5/8 1.5~16 6500 $696.00 Classic Keyless Drill Chucks Keyless Drill Chucks with Diamond-Coated Jaws Max inch mm rpm CD30-J0 0~1/8 0~3 35000 $NA CD30-J1 0~1/8 0~3 35000 $NA CD65-J1 0~1/4 0~3 20000 $NA CD130-J33 1/32-1/2 1~13 7000 $543.00 CD130-J6 1/32~1/2 1~13 7000 $543.00 Stainless Steel Keyless Drill Chuck CS30-3/8 0~1/8 0~3 7500 $516.00 CS50-3/8 1/32~1/4 1-6 5000 $553.00 Stainless Steel Diamond Coated page 190 A) Spanner Wrench Type Special design & manufacture against for super heavy torque use. When tightened the chuck, you can double the torque by using spanner wrench than by hand. Mount. Wt. Taper Lbs 11014 J0 0-1/8 0.20 $78.00 11015 J1 0-1/8 0.20 $78.00 11016 J1 0-5/16 0.70 $79.00 11018 J33 0-3/8 1.54 $90.00 11019 J2 0-3/8 1.54 $90.00 11025 J6 0-1/2 2.28 $108.00 11026 J33 0-1/2 2.28 $108.00 Optional $4.00 11028 J6 1/8-5/8 3.20 $114.00 B) Uni-Body Type Extremely rigid construction; Minimize the accumulative tolerances; Prevent the drill chucks from falling out; Extremely safe in operation Mount. Wt. Taper Lbs INT8C.JC20 JC20 0-5/16 1.11 $98.00 INT8C.MT2 MT2 0-5/16 1.15 $98.00 INT8C.JC3/4 JC-3/4 0-5/16 $132.00 INT13C.R8 R8 0-1/2 3.20 $153.00 INT13C.JC25 JC25 0-1/2 2.75 $142.00 INT13C.MT2 MT2 0-1/2 2.42 $142.00 INT13C.MT3 MT3 0-1/2 2.75 $142.00 INT13C.MT4 MT4 0-1/2 3.48 $142.00 INT13C.JC3/4 JC-3/4 0-1/2 2.53 $142.00 INT13C.JC1 JC-1 0-1/2 2.86 $142.00 INT13C.JC1-1/4 JC-1 1/4 0-1/2 3.30 $142.00 INT16C.R8 R8 1/8-5/8 3.20 $215.00 INT16C.MT3 MT3 1/8-5/8 3.34 $153.00 INT16C.JC3/4 JC-3/4 1/8-5/8 3.30 $153.00 INT16C.JC1 JC-1 1/8-5/8 3.50 $153.00 INT16C.JC1-1/4 JC-1 1/4 1/8-5/8 3.96 $153.00 Precision Drill Chuck Classic Keyless Drill Chuck (Tapered Mount) JC20/25 20 or 25mm straight shank Max. Wt Blind Hole Through Hole inch rpm lbs 0-1/16 50,000 0.1 C15-J0 $431.00 CH15-J0 $439.00 0-1/8 35,000 0.2 C30-J0 $298.00 CH30-J0 $298.00 0-1/8 35,000 0.2 C30-J1 $298.00 CH30-J1 $298.00 0-3/16 25,000 0.5 C50-J1 NA CH50-J1 NA 0-1/4 20,000 0.7 C65-J1 $296.00 CH65-J1 NA 0-5/16 15,000 1.0 C80-J2 NA CH80-J2 NA 0-3/8 12,000 1.4 C100-J33 $337.00 CH100-J33 NA 0-3/8 12,000 1.4 C100-J2 $337.00 CH100-J2 NA 1/32-1/2 7,000 2.1 C130-J33 $372.00 CH130-J33 NA 1/32-1/2 7,000 2.1 C130-J2 $372.00 CH130-J2 NA 1/32-1/2 7,000 2.1 C130-J6 $372.00 CH130-J6 NA 1/8-5/8 4,000 2.8 C160-J6 $402.00 CH160-J6 NA MT2/3/4

ER Type Collet Chuck System Shank Set China Taiwan GTER8A R8 8 PCS $219.00 $320.00 GTER8B MT#3 8 PCS $219.00 $320.00 GTER8C MT#4 8 PCS $219.00 $320.00 GTER8D MT#5 8 PCS $219.00 $320.00 GTER8E NT30 8 PCS $219.00 $320.00 GTER8F NT40 8 PCS $219.00 $329.00 GTER8G NT50 8 PCS $219.00 $390.00 GTER15A R8 15 PCS $309.00 $460.00 GTER15B MT#3 15 PCS $309.00 $460.00 GTER15C MT#4 15 PCS $309.00 $460.00 GTER15D MT#5 15 PCS $309.00 $460.00 GTER15E NT30 15 PCS $309.00 $460.00 GTER15F NT40 15 PCS $309.00 $480.00 GTER15G NT50 15 PCS $440.00 $575.00 Description: GTER8 (8 pcs set):1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1 GTER15 (15 pcs set): 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 Drill Chuck Shank A) MT Shanks Taper Shank B) Straight Shanks J Taper Straight Shank Wide holding range; Accuracy to.0001 ; Unique self-releasing system; High precision collet chuck system suitable for all milling and drilling applications; Kit includes chuck holder and wrench; Hardwood case is included GROMAX Heavy Duty Ball Bearing Drill Chuck Suitable for heavy duty use; All parts are hardened by heat treatment and precision ground; Super clamping power Quality Import Shank Taper MT. MT0 J0 / / AM0J0 $22.00 MT0 J1 / / AM0J1 $22.00 MT1 J0 / / AM1J0 $22.00 MT1 J1 / / AM1J1 $22.00 MT1 J2 15006 $6.00 AM1J2 $22.00 MT1 J33 / / AM1J33 $22.00 MT1 J6 / / AM1J6 $22.00 MT2 J0 / / AM2J0 $22.00 MT2 J1 15014 $7.00 AM2J1 $22.00 MT2 J2 15015 $7.00 AM2J2 $22.00 MT2 J3 15016 $7.00 / / MT2 J33 15018 $7.00 AM2J33 $22.00 MT2 J4 15019 $7.00 / / MT2 J6 15017 $7.00 AM2J6 $22.00 MT3 J1 / / AM3J1 $26.00 MT3 J2 / / AM3J2 $26.00 MT3 J3 15038 $10.00 / / MT3 J33 15027 $10.00 AM3J33 $26.00 MT3 J4 15028 $13.00 / / MT3 J6 15026 $10.00 AM3J6 $26.00 MT4 J2 / / AM4J2 $41.00 MT4 J33 15039 $13.00 AM4J33 $41.00 MT4 J4 15034 $13.00 / / MT4 J6 15033 $13.00 AM4J6 $41.00 MT5 J6 / / AM5J6 $78.00 Quality Import Shank Taper dia. 3/8 J0 38000 $6.00 A38J0 $44.00 3/8 J1 38001 $6.00 A38J1 $43.00 3/8 J2 38002 $6.00 / / 1/2 J0 12000 $7.00 A12J0 $44.00 1/2 J1 12001 $7.00 A12J1 $46.00 1/2 J2 12002 $7.00 A12J2 $55.00 1/2 J33 12033 $7.00 A12J33 $72.00 1/2 J6 12006 $7.00 A12J6 $77.00 5/8 J1 / / A58J1 $47.00 5/8 J2 / / A58J2 NA 5/8 J33 / / A58J33 $72.00 5/8 J6 / / A58J6 $77.00 3/4 J33 34033 $9.50 A34J1 NA 3/4 J4 34004 $9.50 A34J2 NA 3/4 J6 34006 $9.50 A34J6 $79.00 1 J2 / / A1J2 NA 1 J3 10003 $10.50 / / 1 J33 10033 $10.50 A1J33 $75.00 1 J6 10006 $10.50 A1J6 NA Mount. Wt. Taper Lbs BB12006 J6 1/32-1/2 3 $43.00 BB12033 J33 1/32-1/2 4 $54.00 BB12003 J3 1/32-5/8 5 $54.00 BB12002 J2 1/32-3/8 5 $75.00 BB12005 J5 3/16-1 10 $126.00 GROMAX Electric Drill Chucks For electric drill, super gripping power; Quick releasing of drill bits and not slip when drilling cement; Adopt alloy steel; durable for impact & friction; Lasted for long time. Key Type Keyless Type Type Female Wt. Thread Lbs 11078 Keyless 3/8 x24unf 1/16-3/8 0.7 $46.00 11081 type 1/2 x20unf 1/32-1/2 1.54 $55.00 11086 5/8 x16unf 1/8-5/8 2.3 $66.00 10032 Key type 3/8 x24unf 1/32-3/8 0.6 $11.00 10053 1/2 x20unf 3/64-1/2 1.0 $13.00 page 191 Tool Setting Stand Holder Type Prrice 7852 BT30/CAT30 $150.00 7854 BT40/CAT40 $170.00 7856 BT50/CAT50 $195.00 C) R8 Shanks Machine Shop Supply Collet, Drill Chuck Range 810-006 1/8 ~ 3/4 By 8THS 6pcs R8 Collet set $150.00 810-011 1/8 ~ 3/4 By 16THS $275.00 11pcs R8 Collet set 810-023 1/16 ~ 3/4 By 32NDS 23pcs R8 Collet set $583.00 510-008 1/8 ~ 1 By 8THS $200.00 8pcs 5C Collet set 510-017 1/16 ~ 1-1/16 By 16THS $374.00 17pcs 5C Collet set 510-033 1/16 ~ 1-1/16 By 32NDS $782.00 33pcs 5C Collet set 510-065S 1/16 ~ 1-1/16 By 64THS $1,598.00 65pcs 5C Collet set R8 & 5C COLLET SET 5C R8 Made of high-test grade steel Precision ground to close tolerance HSK HOLDER / TOOL LOCKING FIXTURE Quality Import Shank Taper R8 R8 J1 / / AR8J1 $78.00 R8 J2 R8002 $15.00 AR8J2 $78.00 R8 J3 R8003 $15.00 / / R8 J33 R8033 $15.00 AR8J33 $78.00 R8 J6 R8006 $15.00 AR8J6 $78.00 Lyndex R8 & 5C Collet Set Range # Of Collet R8-1 1/8 ~ 3/4 By 8THS 6 $32.00 R8-2 1/8 ~ 3/4 By 16THS 11 $58.00 R8-3 1/16 ~ 3/4 By 32NDS 23 $120.00 5C-1 1/8 ~ 3/4 By 8THS 6 $36.00 5C-3 1/16 ~ 1-1/16 By 16THS 17 $108.00 5C-4 1/16 ~ 1-1/16 By 32NDS 33 $222.00 5C-69 1/16 ~ 1-1/8 By 64NDS 69 $442.00 Pro Quality 5C Round Collet Set T.I.R.<0.0005 5C-15P 1/8 ~ 1 By 64NDS 15 $105.00 HSK-A63-ETL &Specification LIST PRICE HSK-A63-ETL $232.00 HSK-A100-ETL &Specification LIST PRICE HSK-A100-ETL $256.00 Tool Locking fixture Holder Type ETL-30 BT30/CAT30 $120.00 ETL-40 BT30/CAT30 $150.00 ETL-50 BT30/CAT30 $170.00 Taper Shank