Centurion Swing Gate Motors R3 - DOMESTIC ROTARY SWING GATE OPERATOR The R3 rotary arm swing gate operator remains the logical choice for applications where the gate pillar is very wide and will not accommodate the VECTOR2 linear drive system. It can handle domestic gates up to 3.5m wide per leaf weighing no more than 150kg. The R3 also offers battery back-up. The electronic controller and power supply are mounted in the MASTER motor giving the option to wall mount the operators, resulting in an installation that is greatly simplified. As with all CENTURION gate controllers, the R3 offer a wide range of useful features. As with the sliding gate range of operators, this battery driven swing gate operator can also be adapted to operate off a solar power supply. The smooth operator for swing gates Main features - Battery backup - Full position control - Safe and quiet functioning - Fast and smooth operation - Multiple programmable features - Master motor with integrated controller and PSU Models R3 The logical choice for domestic gates with large pillars
R3's Technical Data Data Description Input voltage 220V AC +/-10%, 50Hz Motor voltage 12V DC Motor power supply Battery driven - 800mA charger Operator output torque max
95Nm Typical gate opening time <14 sec Duty cycle - mains present 25% Daily operations max 150 Maximum leaf width for corresponding gate mass 2m - 350kg 3.5m - 150kg - Can operate off a solar supply, consult Centurion Systems for assistance - 7Ah battery (can be upgraded for longer power failure autonomy) - Based on 25oC ambient temperature and unit not in direct sunlight - Assumes a 90 degree opening gate and pedestal mount
R5 - DOMESTIC AND LIGHT-INDUSTRIAL ROTARY SWING GATE OPERATOR The smooth operator for swing gates The R5 is well suited for higher volume sites such as entrances to housing estates and business parks. It can handle gates up to 3.5m wide per leaf weighing no more than 250kg. The R5 also offers battery back-up and with the electronic controller and power supply mounted in the Master motor and with the option to wall mount the operator, installation is greatly simplified. As with the sliding gate range of operators, these battery driven swing gate units can also be adapted to operate off a solar power supply Main features - Battery backup - Full position control - Safe and quiet functioning - Fast and smooth operation - Multiple programmable features - Master motor with integrated controller and PSU Models R5 This unit is well suited for large domestic and light-industrial swing gates R5's Technical Data
Data Description Input voltage 220V AC +/-10%, 50Hz Motor voltage 12V DC Motor power supply Battery driven - 2A charger Operator output torque max 250Nm Typical gate opening time
< 17 sec Duty cycle - mains present 50% Daily operations max 250 Maximum leaf width for corresponding gate mass 2m - 600kg 3.5m - 260kg - Can operate off a solar supply, consult Centurion Systems for assistance - 7Ah battery (can be upgraded for longer power failure autonomy) - Based on 25oC ambient temperature and unit not in direct sunlight - Assumes a 90 degree opening gate and pedestal mount  Brochure
VECTOR 2 - DOMESTIC AND LIGHT-INDUSTRIAL LINEAR SWING GATE OPERATORS For domestic and light industrial swing gate applications the VECTOR2 linear swing gate system with battery back-up offers a quick and easy (not to mention good looking) installation. It is an exceptionally strong set of operators for gates up to 4m wide, per leaf, weighing no more than 350kg. The low profile shape of the VECTOR2 operator enhances its aesthetic appeal and allows it to blend in as unobtrusively as possible with the design of the gate. With full position control the system provides pin point stopping of the gate in the open and closed positions without the need for mechanical end stops. Added to this its sophisticated speed control circuit smoothly operates the gate with reduced shock, loading, and extended reliability. Set-up of the system using the VECTOR2 controller with an intuitive, easy-to-use LCD interface, is absolute child s play and choosing from a wide range of features, the VECTOR2 system can be adapted to suit almost any application. In 2009 the VECTOR2 became a winner of the prestigious SABS Design Institutes Design Excellence Awards. This was a befitting follow up of the VECTOR prototype winning an SABS Design Institute Prototype in 2004. Â Swings gates precisely!
- Click here to see a video of the VECTOR swing gate operator - Click here to see the VECTOR installation video Main features - Battery backup - High push force - Full position control - Fast operating speed - Quick and easy installation - Safe anti-crushing protection - Smooth acceleration and deceleration - Multiple operating features including alarm modes - Exceptionally easy system set up via LCD user interface - nboard NOVA multichannel receiver with selective delete Models VECTOR2 400 Reliable operator for majority of domestic swing gate applications VECTOR2 500 Extended stroke for large domestic and light-industrial swing gates