Heavy Duty Sealed Bearing and Commercial Hardware
Heavy Duty Sealed Bearing All have Horizontal Adjustability of approximately 1/2" For each side of the hinge, you choose: 44Aluminum or Steel material 44Bolt-on or Weld-on application 44Black or Mill (unpainted) finish Understanding the Part Number Material: A = Aluminum S = Steel Application: B = Bolt-on W = Weld-on Finish: M = Mill B = Black* Heavy Duty Body Yoke Body (Gate) Yoke (Post) HDBY-ABB-SWM Alum Bolt-on Black Steel Weld-on Mill * Black finish on aluminum and steel is e-coated. Body - the portion of the hinge (with bearings) that rotates HDBY-ABB-ABB 44Body: Alum, Bolt-on, Blk 44Yoke: Alum, Bolt-on, Blk 44Height: 7.2" 44Weight: 1.5 lbs each HDBY-ABB-AWM 44Body: Alum, Bolt-on, Blk 44Weight: 1.4 lbs each Hinge Features: Yoke - the bracket portion which holds the body 44Each hinge contains 2 sealed roller bearings (no grease required) 44All hinges slotted for horizontal adjustability 44Rating: 2,500 lbs. per hinge based on factory dynamic rating of bearings** 44Assembled in the U.S. 44Warranty: Lifetime on components and 5 years on bearings 44Unpainted steel hinges are zinc plated. 44Steel weld-on body fits round or square profiles 44All hinges sold individually but packaged 8/case. ** On this type of hinge, the mounting bracket is the weak point (not the bearings). Nationwide Industries steel yoke is 15% thicker than competitive products reviewed. HDBY-ABB-SBB 44Body: Alum, Bolt-on, Blk 44Yoke: Steel, Bolt-on, Blk 44Gap Min: 3.0" 44Gap Max: 3.5" 44Weight: 2.5 lbs each HDBY-ABB-SWM 44Body: Alum, Bolt-on, Blk 44Weight: 1.9 lbs each 1
All have Horizontal Adjustability of approximately 1/2" Heavy Duty Sealed Bearing HDBY-ABM-ABM 44Body: Alum, Bolt-on, Mill 44Yoke: Alum, Bolt-on, Mill 44Height: 7.2" 44Weight: 1.5 lbs each HDBY-AWM-ABB 44Yoke: Alum, Bolt-on, Blk 44Gap Min: 2.4" 44Gap Max: 2.9" 44Height: 7.2" 44Weight: 1.3 lbs each HDBY-ABM-AWM 44Body: Alum, Bolt-on, Mill 44Weight: 1.4 lbs each HDBY-AWM-ABM 44Yoke: Alum, Bolt-on, Mill 44Gap Min: 2.4" 44Gap Max: 2.9" 44Height: 7.2" 44Weight: 1.2 lbs each HDBY-ABM-SBM 44Body: Alum, Bolt-on, Mill 44Yoke: Steel, Bolt-on, Mill 44Gap Min: 3.0" 44Gap Max: 3.5" 44Weight: 2.5 lbs each HDBY-AWM-AWM 44Gap Min: 2.4" 44Gap Max: 2.9" 44Hinge Height: 4.1" 44Weight: 1.1 lbs each HDBY-ABM-SWM 44Body: Alum, Bolt-on, Mill 44Weight: 1.9 lbs each HDBY-AWM-SBB 44Yoke: Steel, Bolt-on, Blk 44Weight: 2.3 lbs each 2
Heavy Duty Sealed Bearing All have Horizontal Adjustability of approximately 1/2" HDBY-AWM-SBM 44Yoke: Steel, Bolt-on, Mill 44Weight: 2.3 lbs each HDBY-SBB-SBB 44Body: Steel, Bolt-on, Blk 44Yoke: Steel, Bolt-on, Blk 44Gap Min: 3.0" 44Gap Max: 3.5" 44Height: 6.5" 44Weight: 3.7 lbs each HDBY-AWM-SWM 44Gap Min: 2.5" 44Hinge Height: 4.1" 44Weight: 1.6 lbs each HDBY-SBB-SWM 44Body: Steel, Bolt-on, Blk 44Yoke:Steel, Weld-on, Mill 44Weight: 3.0 lbs each HDBY-SBB-ABB 44Body: Steel, Bolt-on, Blk 44Yoke: Alum, Bolt-on, Blk 44Hinge Height: 7.2" 44Weight: 2.7 lbs each HDBY-SBM-ABM 44Body: Steel, Bolt-on, Mill 44Yoke: Aluml, Bolt-on, Mill 44Hinge Height: 7.2" 44Weight: 2.7 lbs each HDBY-SBB-AWM 44Body: Steel, Bolt-on, Blk 44Weight: 2.5 lbs each HDBY-SBM-AWM 44Body: Steel, Bolt-on, Mill 44Weight: 2.5 lbs each 3
All have Horizontal Adjustability of approximately 1/2" Heavy Duty Sealed Bearing HDBY-SBM-SBM 44Body: Steel, Bolt-on, Mill 44Yoke: Steel, Bolt-on, Mill 44Gap Min: 3.1" 44Gap Max: 3.5" 44Height: 6.5" 44Weight: 3.7 lbs each HDBY-SWM-AWM 44Gap Min: 2.5" 44Height: 4.1" 44Weight: 1.8 lbs each HDBY-SBM-SWM 44Body: Steel, Bolt-on, Mill 44Weight: 3.0 lbs each HDBY-SWM-SBB 44Yoke: Steel, Bolt-on, Blk 44Weight: 3.0 lbs each HDBY-SWM-ABB 44Yoke: Alum, Bolt-on, Blk 44Gap Min: 2.5" 44Hinge Height: 7.2" 44Weight: 2.0 lbs each HDBY-SWM-SBM 44Yoke: Steel, Bolt-on, Mill 44Weight: 3.0 lbs each HDBY-SWM-ABM 44Body: Steel, Weld-on, Mil 44Yoke: Alum, Bolt-on, Mill 44Gap Min: 2.5" 44Hinge Height: 7.2" 44Weight: 2.0 lbs each HDBY-SWM-SWM 44Gap Min: 2.6" 44Hinge Height: 4.1" 44Weight: 2.3 lbs each 4
Heavy Duty Gate Heavy Duty Non Self-Closing Aluminum Hinge Heavy Duty Estate Gate Hinge 2.01 1.05.85 2.00 3.25 2.49 2.04 4.00 1.36 3.25 NW216-26 Black NW216-36 Bronze NW216-56 White 44Post flange: 5"(H) x 3 1/4"(W) x 3 1/4"(D) 44Gate flange: 2 3/8"(H) x 1 5/16"(W) x 2"(D) 44Gate flange will accommodate both 2" and 1" gate frame 4420 each per case @ 34lbs Heavy Duty Block Hinge for Aluminum Gate.74 1.50 1.50 NW6218 Mill (2") NW6218-BK Black (2") NW6218-25 Mill (2 1/2") 44Horizontal adjustability 44Has an aluminum block for welding 44Acetal bushing 44Stainless steel hinge pin max 6.50 min 3.25 Rotating Nut Design NW6318-20 (2") NW6318-20H (2") w/mounting holes NW6318-25 (2 1/2") NW6318-25H (2 1/2) w/mounting holes 44Zinc plated steel mounting plate. 44Fits 2"or 2 1/2" size gate frame. 44Ships unassembled (weld block to gate, then assemble) 4412 each per case @ 40lbs Large Heavy Duty Ball Bearing Hinge 1.50 4.32 2.55 1.77 4418 each per case @ 45lbs NW6189 44Aluminum Heavy Duty Steel Barrel Hinge 2.25 44Beveled corners, designed to be welded 44Brass bushings and heavy duty stainless steel pin 44No grease required NW6229 44Zinc plated steel 44Sealed ball barrings 44No grease required 2.00 444" tall 448 each per case @ 44lbs Heavy Duty Estate Gate Hinge with Adjustability 2.00 1.47 1.22 1.47.38 1.63 Right Hinge 1.38.25 4.00 2.00 2.67 2.02 Left Hinge NW6215R Black NW6215L Black 44Contains grease fitting 44Steel power coated 446 each per case @ 22lbs.375 2.50 NW6242-B-BK Black Bolt-on (bolts not included) NW6242-W-BK Black Weld-on (Special Order) 44Fits 2" gate frames and posts 4" or larger 44Aluminum and stainless steel construction 44Great strength, and horizontal adjustability 448 each per case @ 28lbs 5
, Keyless Locks, Drop Rods, Closers Flip Latch Great for Dumpster Use! NW6169 Black 44Commercial grade 44Pad-lockable 44Zinc plate steel with black powder coated finish 44Stainless steel through-bolts 4410 per case @ 37lbs.50 3.75 max 2.75 min.75 3.75 2.49 1.08.50 Commercial Drop Rods 24" NW6270-24BK Black NW6270-24HDG Hot Dip Galvanized 10/Case @ 46lbs 36" NW6270-36BK Black NW6270-36HDG Hot Dip Galvanized 10/Case @ 55lbs 48" NW6270-48BK Black NW6270-48HDG Hot Dip Galvanized 5/Case @ 36lbs 44Heavy duty 1 O.D. drop rod 44Zinc plated, powder coated steel 44Through bolt design 44Can be used on vinyl, wood, aluminum or chain link gates 4.50 1.75 4.50 Keystone Panic Latch Replaces Panic Bar Applications KPL-P2-BK Black 44Heavy duty commercial design 44Anti-tamper design 44Secure entry with 6 pin 44Easy exit with large button 446 per case @ 18lbs Patent Pending Meets Egress codes and specs. Check with your local codes to meet requirements. Keyless Locks 44Mechanical Combination Locks - No electronics 44Locks fit gate frames 1-3/8" to 2-3/8" Two Sided Keypad KYPD-2D-BK Black KYPD-2D-SC Satin Chrome 1 Side Keypad & 1 Side Blank KYPD-2B-BK Black KYPD-2B-SC Satin Chrome Shotgun Gate Closer Also available in a Pad Lockable version! NW6270L 44Padlocks not included Controlled Closing Power to Avoid Gate Slamming SHOTGUN-BK Black SHOTGUN-SC Satin Chrome 44One SKU closes any gate up to 250 lbs* 44Anti-slam technology 44Adjustable closing speed 44No oil therefore no leaks 4410 per case @ 67lbs * Tested on a 6' high, 6' wide gate. Needs a gate stop to stop at 90 degrees Patented Double barrel closing power 6
GC1-BK (Black)»Hold Open Feature»Powder Coated Steel»Works with Gates Widths up to 54"»Adjustable Closing Speed GC1-BK (Black)»Works with Gates up to 150 lbs.»powder Coated Steel»90 Hold Open Feature»Maximum Opening of 90»Adjustable Closing Speed and Adjustable Latching Speed Chain Link Accessories and more fence@nationwideindustries.com Cost Effective Easy to Install & Braces Accessories Vinyl Fence & Railing Hardware»Dead Locking Spring Latch»Marine Grade Finish KYPD Style NW-2230DC-BK (Black) or NW-2230DC-SC (Satin Chrome)» Double Sided Combo Locks with Knobs NW-2230DC-KO» Same as Above with Key Option on One Side on One Side»Locks Never Need Lubrication» Same as Above with Key Option NW-2230DC-KO with Knobs NW-2230DC-SC (Satin Chrome)» Double Sided Combo Locks Round Knob Styles Available NW-2230DC-BK (Black) or»our Lock Boxes Provide a Perfect Fit»Locks Fit Gate Frames 1-3/8" to 2-3/8"»Slip Clutch Design - No Damage to Lock if Handle is Pushed Down too Hard Drop Rods Order in Left or Right, Black or Satin Chrome Magnetic Pool NW-1150DCL-BK Left NW-1150DCR-BK Right NW-1150DCL-SC Left NW-1150DCR-SC Right» Special Order» Requires Matching Lockbox Below KYPD-2D-BK (Black) KYPD-2D-SC (Satin Chrome) 1 Side Keypad/1 Side Blank KYPD-2B-BK (Black) KYPD-2B-SC (Satin Chrome) NW-285-P-SC (Satin Chrome)» For use with Panic Bar NW-PB1100-SC (Satin Chrome) Lockbox2C (Steel) Lockbox2C-AL (Aluminum)» For Use with KYPD Models Lockbox3 (Steel) Lockbox3-AL (Aluminum)» For Use with NW-1150 Models info@nationwideindustries.com Lockbox3-AL (Aluminum)» For Use with NW-1150 Models» For Use with KYPD Models Lockbox3 (Steel) Lockbox2C-AL (Aluminum) Lock Boxes Lockbox2C (Steel) Panic Bar NW-PB1100-SC (Satin Chrome)» For use with Panic Bar Drop Rods Ask about our other Fence Hardware Catalogs Vinyl Fence & Railing Hardware Wood Fence Hardware Innovative Fence and Railing Hardware Magnetic Pool Drop Rods Braces Accessories Drop Rods Accessories For Vinyl, Metal and Wood Systems Post Mounts Chain Link Accessories and more Innovative Fence and Railing Hardware Vinyl Fence Hardware Wood Fence Hardware Hydraulic Gate Closers Controlled Closing Power to Avoid Gate Slamming GC4-BK (Powder Coated Steel - Black) GC4-SC (Stainless Steel - Satin Chrome Look) GC3-BK (Powder Coated Steel - Black) GC3-SC (Stainless Steel - Satin Chrome Look) GC3LD-BK (Powder Coated Steel - Black) GC3LD-SC (Stainless Steel - Satin Chrome Look) Keyless Gate Locks LIFETIME Mechanical Warranty Two Sided Keypad Two Sided Chain Link Gate Hardware Magnetic Safety Locks Wheels and Trolleys Cantilever Gate Rollers Fittings»Hinge Arrangements In-line & Offset»Maximum Opening of 110»GC4 Works with Gates 150-250 lbs. and 44" to 72" wide»gc3 Works with Gates up to 75-175 lbs. and 40" to 64" wide»gc3ld Works with Gates up to 50-125 lbs. and 36" to 52" wide»hydraulically Controlled Closing Speed»4 Tension Setting Options Two Sided Heavy Duty Accessories Wood Fence Hardware GC2-BK (Black) GC2-WH (White)»Works with Gates up to 125 lbs.»works with Gates Widths up to 54"»Adjustable Closing Speed and Adjustable Latching Speed»90 Hold Open Feature»Maximum Opening of 90»Powder Coated Steel Easy to Install & Cost Effective» Mechanical Combination Locks - No Electronics»Passage Function May Be Set for Exiting Without Code»Easy Code Change»Codes Can be Set with Any Amount of Numbers»Dead Locking Spring Latch»Marine Grade Finish»Slip Clutch Design - No Damage to Lock if Handle is Pushed Down too Hard»Our Lock Boxes Provide a Perfect Fit»Locks Fit Gate Frames 1-3/8" to 2-3/8"»Locks Never Need Lubrication One Sided Panic Bar»Works with Gates up to 150 lbs.»works with Gates Widths up to 54"»Adjustable Closing Speed»Hold Open Feature»Powder Coated Steel Round Knob Styles Available Lock Boxes fence@nationwideindustries.com info@nationwideindustries.com Hydraulic Gate Closers Keyless Gate Locks Chain Link Gate Hardware Nautilus Self-Closing CornerStone The Million Cycle Self-Closing Nylon Keystone Heavy Duty Key-Lockable Keystone X external Mount Key-Lockable AquaLatch Magnetic Pool Safety GateShare Multi-Lock Latch Manta Magnetic Nylon OrnaMAG Magnetic Metal Trident Magnetic Gate Safety ArmorLatch Magnetic Lever LockThru Wood Gate Swing V-Notch and Shotgun Gate Closers 2017 Nationwide Industries, Inc. All Rights Reserved. info@nationwideindustries.com HDBY 05/17