Facts and figures INTEGRALPICKER V www.arburg.com
INTEGRALPICKER V Technical data Stroke, X-axis F Stroke, Y axis Clamping surface fixed mould platen A H K D C B 135 G P Ejection chute B-axis M N L 2
Technical data INTEGRALPICKER V Machine type Dim. A Dim. B Dim. C Dim. D Dim. F Dim. G Dim. H Dim. K Dim. L Dim. M Dim. N Dim. P mm mm mm mm mm mm mm mm mm mm mm mm 270 A / H 1220 370 2940 105 105 715 1285 2180 230 150 190 170 270 S 1168 370 2890 105 105 715 1235 2130 230 150 190 170 270 C GOLDEN EDITION 1170 380 2920 75 100 800 920 2160 185 130 135 110 320 C GOLDEN EDITION 1170 380 2920 75 100 800 920 2160 185 130 135 110 370 A / E / H / S 1220 350 3020 35 100 960 1220 2250 230 195 200 160 420 C GOLDEN EDITION 1248 365 3170 115 88 950 1210 2305 285 250 235 135 470 A / E / H / S 1302 380 3260 70 88 1120 1150 2395 275 235 250 165 470 C GOLDEN EDITION 1248 410 3210 70 88 950 1210 2340 285 250 235 135 520 A / E / H / S 1348 400 3350 30 88 1135 1340 2480 285 250 300 165 570 A / E / H / S 1408 440 3440 0 88 1220 1375 2570 285 250 300 190 570 C GOLDEN EDITION 1358 375 3390 0 88 1060 1460 2520 345 245 245 200 Axes Machine type Handling X-axis Y-axis B-axis Repeat Weight weight accuracy Standard extended *) per axis +/- Max. kg mm Max. mm/s mm mm Max. mm/s Degrees max. degree/s mm kg 270 A / H / S 1.0 250 1200 700 800 2000 100 100 0.2 50 270 C GOLDEN EDITION 1.0 250 1200 700 800 2000 100 100 0.2 50 320 C GOLDEN EDITION 1.0 250 1200 700 800 2000 100 100 0.2 50 370 A / E / H / S 1.0 250 1200 700 800 2000 100 100 0.2 50 420 C GOLDEN EDITION 1.0 400 1200 800 900 2000 100 100 0.2 60 470 A / E / H / S 1.0 400 1200 800 900 2000 100 100 0.2 60 470 C GOLDEN EDITION 1.0 400 1200 800 900 2000 100 100 0.2 60 520 A / E / H / S 1.0 400 1200 800 900 2000 100 100 0.2 60 570 A / E / H / S 1.0 400 1200 800 900 2000 100 100 0.2 60 570 C GOLDEN EDITION 1.0 400 1200 800 900 2000 100 100 0.2 60 *) Optional 3
INTEGRALPICKER V Equipment The use of the INTEGRALPICKER V requires an ARBURG ALLROUNDER. j Retrofittable, flexible version for size 270 to 570 ALLROUNDERs from year of construction 2000. Operation with independent SELOGICA control system, signal exchange via EUROMAP 67 Axes m Main axes with servo-electric drive for rapid, simultaneous movements with a high repeat accuracy Gripper m Sprue grippers, pneumatically operated with spring return j Additional sprue grippers, pneumatically-operated with spring return movement j Sensor system for sprue monitoring Pneumatic valves for grippers m All pneumatic valves connected to the gripper flange with rapid connect couplings Vacuum equipment for grippers j Vacuum equipment (venturi principle) for parts handling with suction devices (maximum 2) m All vacuum devices connected near the gripper. Including vacuum switches for parts monitoring Pneumatic maintenance unit m Manually-adjustable filter pressure reducer for adjusting the pressure level m Electric on/off function Control m Sequence programming with symbols via SELOGICA. Teach-in function for user-friendly sequence programming m Display selection via function and direct access keys m Cycle step display in sequence diagram m Robot system can be moved in units analogous to the cycle sequence m Three different speeds can be selected in manual mode for fast and reliable programming. Axes can be moved progressively or incrementally (0.1 mm, 1 mm or 10 mm) m Data record for robotic system integrated in data record for injection moulding machine (not with independent SELOGICA control system) j Synchronous movements of robotic system with ejector and mould opening movement m Interface between robotic system and injection moulding machine m Basic machine j Optional 4
Gripper adaptations INTEGRALPICKER V Adjustment range for sprue grippers ±10 Gripper interface Pn 2 Pn 1 Va 2 Va 1 A A 10 Connector for hose size DA 4 / DI 2.8 M 5 Ø4.5 24 20 Ø5.5 20 24 29.5 19.5 110 10 Ø5.5 8.5 10 24 40 A-A R 5.25 5
INTEGRALPICKER V Gripper adaptations with 1 sprue gripper: Mounting the sprue grippers with 1 vacuum circuit (optional): Mounting the holder for suction devices 6
Gripper adaptations INTEGRALPICKER V with 2 sprue grippers (optional): max. 135 with 2 vacuum circuits (optional): max. 160 7
INTEGRALPICKER V ARBURG GmbH + Co KG Arthur-Hehl-Strasse 72290 Lossburg Tel.: +49 7446 33-0 www.arburg.com E-Mail: contact@arburg.com With locations in Europe: Germany, Belgium, Denmark, France, United Kingdom, Italy, Netherlands, Austria, Poland, Switzerland, Slovakia, Spain, Czech Republic, Turkey, Hungary Asia: People s Republic of China, Indonesia, Malaysia, Singapore, Taiwan, Thailand, United Arab Emirates America: Brazil, Mexico, USA For more information, please go to www.arburg.com. 2016 ARBURG GmbH + Co KG The brochure is protected by copyright. Any utilisation, which is not expressly permitted under copyright legislation, requires the previous approval of ARBURG. All data and technical information have been compiled with great care. However we accept no responsibility for correctness. Individual illustrations and information may deviate from the actual delivery condition of the machine. The relevant valid operating instructions are applicable for the installation and operation of the machine. ARBURG GmbH + Co KG DIN EN ISO 9001 + 14001 + 50001 certified 680470_EN_GB_092016 Subject to alterations