Gasoline Fuel Filters For Marine Applications
Complete Protection On The Water Every time you squeeze the trigger, you threaten your engines life. More than ever, today s high-performance gasoline inboard and outboard engines require clean, dry fuel. No matter how carefully gasoline is handled and stored, dirt, rust, gums, algae and water are going to find their way in, and just a few drops can leave you dead in the water. Racor fuel filter/water separators with Aquabloc II media remove virtually 100% of damaging water and solids, allowing engines to maintain maximum horsepower and efficiency. Install a Racor mounting head and filter or spin a filter directly onto your engine and instantly improve its performance. Direct Spin-on Replacement Many vessels come equipped with some type of standard filter. Racor offers premium filter upgrades that fit directly onto existing mounting heads. Racor offers premium filter systems which include a mounting head and bracket for those vessels without a standard fuel filter. Selection Guide: Vessels with Inboard Gasoline Engines or Generators: 1) Must use Racor filter equipped with metal bowls. 2) Carbureted engines can use any UL rated Racor gasoline filter. 3) High performance engines (severe service application) or fuel-injected engines should use units with a flow rate between 40 to 120 GPH (151 to 454 LPH). Consult engine or boat manufacturer for exact fuel flow rate. For boats where a fuel filter/ water separator is already installed, this is generally a Mercruiser or OMC style filter head (fuel ports are on top of filter head), use the B32020MAM (Mercruiser) or B32021MAM (OMC) filter. If there are no filters already installed, specify the 120R-RAC-02, 320R-RAC-02, or 660R-RAC-02 filter based upon required flow rate of engine. For high-performance boats, the 3120R-RAC-32 is recommended. A higher pressure rated filter is available, see model 110A rated at 100 PSI (6.9 bar). Vessels with Outboard Gasoline Engines: 1) Can use Racor filters with either clear bowls or metal bowls. 2) Carbureted engines can use all units. 3) High performance engines (severe service application) or fuel-injected engines should use units with a flow rate between 40 to 120 GPH (151 to 454 LPH). Consult engine or boat manufacturer for exact fuel flow rate. For boats where a fuel filter/ water separator is already installed, this is generally a Mercury/Quicksilver or OMC style filter (fuel ports are on top of the head), use the B32013 (Quicksilver) or B32014 (OMC). If there are no filters installed, specify the 120R-RAC-01, 320R-RAC-01, or 660R-RAC-01 filter based upon flow rate of engine. For high-performance boats, the 3120R-RAC-32 is recommended. For a unit that can replace your primer bulb, use the 490R-RAC-01 with integral primer pump. Note: Clear bowls are for outboard applications only. Important - all filters must be installed on the suction (vacuum) side of the fuel transfer pump.
In-Line Specifications 025-RAC-10A Application Inboard/Outboard Micron 104 Maximum Flow Rate 35 GPH (132 LPH) Ports 1/2-14 NPTF Height 4.2 in. (10.7 cm) Diameter 1.9 in. (4.8 cm) Note: Replace entire assembly at normal service interval Direct Spin-On Replacements Specifications 31871 B32013 B31014 Application Outboard Only Outboard Only Outboard Only OEM Application Mercury Quicksilver OMC Micron 2 10 10 Maximum Flow Rate 50 GPH (189 LPH) 60 GPH (227 LPH) 60 GPH (227 LPH) Replacement Filter N/A S3213 S3214 Height 5.0 in. (12.7 cm) 7.2 in. (18.3 cm) 7.2 in. (18.3 cm) Diameter 2.1 in. (5.3 cm) 3.8 in. (9.7 cm) 3.8 in. (9.7 cm) Center Threads N/A 11/16-16** 1-12 ** The 11/16-16 thread is the most common and fits most existing filter mounting heads in service.
Direct Spin-On Replacements Specifications B32020MAM B32021MAM S3220S UL Application Inboard/Outboard Inboard/Outboard Inboard/Outboard OEM Application Mercruiser OMC Mercruiser Micron 10 10 2 Maximum Flow Rate 60 GPH (227 LPH) 60 GPH (227 LPH) 60 GPH (227 LPH) Replacement Filter S3220 UL S3221 UL N/A Height 6.5 in. (16.5 cm) 6.5 in. (16.5 cm) 4.0 in. (10.2 cm) Diameter 3.8 in. (9.7 cm) 3.8 in. (9.7 cm) 3.7 in. (9.4 cm) Center Threads 11/16-16** 1-12 11/16-16** ** The 11/16-16 thread is the most common and fits most existing filter mounting heads in service. Specifications PFF5510 S3228S UL Application Inboard/Outboard Inboard/Outboard Micron 10 2 Maximum Flow Rate 60 GPH (227 LPH) 60 GPH (227 LPH) Height 4.2 in. (10.7 cm) 4.0 in. (10.2 cm) Diameter 3.6 in. (9.1 cm) 3.7 in. (9.4 cm) Center Threads 11/16-16** 1-14 ** The 11/16-16 thread is the most common and fits most existing filter mounting heads in service.
Complete Assemblies For Outboard Applications Specifications 025-RAC-01 025-RAC-02 Application Outboard Only Outboard Only Micron 250 10 Maximum Flow Rate 25 GPH (95 LPH) 25 GPH (95 LPH) Ports 1/4-18 NPTF 1/4-18 NPTF Replacement Filter S2501 S2502 Height 4.3 in. (10.9 cm) 4.3 in. (10.9 cm) Diameter 2.1 in. (5.3 cm) 2.1 in. (5.3 cm) Width 2.3 in. (5.8 cm) 2.3 in. (5.8 cm) Notes Cleanable Aquabloc II Media Specifications 120R-RAC-01 320R-RAC-01 490R-RAC-01 660R-RAC-01 Application Outboard Only Outboard Only Outboard Only Outboard Only Micron 10 10 10 10 Maximum Flow Rate 30 GPH (114 LPH) 60 GPH (227 LPH) 90 GPH (341 LPH) 90 GPH (341 LPH) Ports 1/4-18 NPTF 1/4-18 NPTF 3/8-18 NPTF 3/8-18 NPTF Replacement Filter S3240 S3227 S3227 S3232 Height 6.5 in. (16.5 cm) 9.3 in. (23.6 cm) 9.9 in. (25.1 cm) 11.0 in. (27.9 cm) Diameter 3.2 in. (8.1 cm) 4.0 in. (10.2 cm) 4.8 in. (12.2 cm) 4.5 in. (11.4 cm) Width 3.2 in. (8.1 cm) 4.0 in. (10.2 cm) 4.5 in. (11.4 cm) 4.2 in. (10.7 cm) Notes 4 Ports 3 Ports 4 Ports/Primer Pump 4 Ports
Complete Assemblies For Inboard or Outboard Applications Specifications 110A Application Inboard/Outboard Micron 10 Maximum Flow Rate 35 GPH (132 LPH) Ports 1/4-18 NPTF Replacement Filter R11T Height 6.0 in. (15.2 cm) Diameter 3.3 in. (8.4 cm) Width 3.2 in. (8.1 cm) Notes Cartridge Filter Specifications 120R-RAC-02 320R-RAC-02 660R-RAC-02 Application Inboard/Outboard Inboard/Outboard Inboard/Outboard Micron 10 10 10 Maximum Flow Rate 30 GPH (114 LPH) 60 GPH (227 LPH) 90 GPH (341 LPH) Ports 1/4-18 NPTF 1/4-18 NPTF 3/8-18 NPTF Replacement Filter S3240UL S3228 UL (10 micron) S3228S UL (2 micron) S3232 UL Height 6.0 in. (15.2 cm) 9.0 in. (22.9 cm) 10.5 in. (26.7 cm) Diameter 3.2 in. (8.1 cm) 4.0 in. (10.2 cm) 4.5 in. (11.4 cm) Width 3.2 in. (8.1 cm) 4.0 in. (10.2 cm) 4.2 in. (10.7 cm) Notes 4 Ports 3 Ports 4 Ports
High-Performance Assembly For Inboard or Outboard Applications Specifictions 3120R-RAC-32 Application Inboard/Outboard Micron 10 Maximum Flow Rate 120 GPH (454 LPH) Ports 1/2-14 NPTF Replacement Filter S3232 UL Height 10.4 in. (26.4 cm) Diameter 5.0 in. (12.7 cm) Width 4.0 in. (10.2 cm) Notes 2 Ports Product Features Racor filters offer the improved features and peace-of-mind that come with our quality fuel filter/water separators. Clear Contaminant Collection Bowl With Drain Valve For Outboards. High-Capacity And Long Life. 2 or 10 Micron Aquabloc II Media. Rated 98% Efficient At 10 Micron Per SAE Test Procedures. Metal Bowl Units For Inboard Powered Boats Meet 33 CFR And USCG Regulations. Meets ABYC Standard For Gasoline Powered Vessels. Effective On Ethanol Blended Fuels. Corrosion Resistant Construction.
Parker Filtration Group Engineering, Manufacturing & Service Locations Filtration Group Headquarters 6035 Parkland Blvd. Cleveland, Ohio, 44124-4141 USA phone 216 896 3000 fax 216 896 4021 www.parker.com/filtration Filtration and Separation Division Balston Products 242 Neck Road Haverhill, MA 01835-0723 USA phone 978 858 0505 fax 978 858 0625 www.parker.com/balston Filtration and Separation Division Finite Filter Products 500 Glaspie Street P.O. Box 599 Oxford, MI 48371-5132 USA phone 248 628 6400 fax 248 628 1850 www.parker.com/finitefilter Hydraulic Filter Division 16810 Fulton County Road #2 Metamora, OH 43540-9714 USA phone 419 644 4311 fax 419 644 6205 www.parker.com/hydraulicfilter Process Advanced Filtration Division 2340 Eastman Avenue Oxnard, CA 93030 USA toll free 877 784 2234 phone 805 604 3400 fax 805 604 3401 www.parker.com/processfiltration Parker Hannifin GmbH & Co KG Inselstrasse 5 D 70327 Stuttgart Wangen Germany phone +49 0 711 7071 290 10 fax +49 0 711 7071 290 70 www.parker.com/racor Racor Division Global Headquarters 3400 Finch Road P.O. Box 3208 Modesto, CA 95353 USA toll free 800 344 3286 phone 209 521 7860 fax 209 529 3278 www.parker.com/racor Beaufort, SC, USA phone 843 846 3200 Holly Springs, MS, USA phone 662 252 2656 Parker Hannifin Industria e Comercio Ltda. Filtration Division Estrada Municipal Joel de Paula, 900 Eugenio de Melo, São José dos Campos CEP 12225 390 SP Brazil phone +55 12 4009 3500 fax +55 12 4009 3529 www.parker.com/br Parker Hannifin Shanghai Co. Ltd. 280 YunQiao Road JinQiao Export Processing Zone Shanghai 201206 China phone +86 21 5031 2525 fax +86 21 5834 3714 www.parker.com/china Parker Hannifin Thailand Co. Ltd. 1023 3rd Floor, TPS Building Pattanakarn Road Suanluang, Bangkok 10250 Thailand phone +66 2717 8140 fax +66 2717 8148 www.parker.com/thailand Parker Hannifin Corporation India Plot EL 26, MIDC, TTC Industrial Area Mahape, Navi Mumbai 400 709 India phone +91 22 5613 7081 82 83 84 85 fax +91 22 2768 6618 6841 www.parker.com/india Parker Hannifin UK Ltd. Filter Division Europe Shaw Cross Business Park Churwell Vale Dewsbury, WF12 7RD England phone +44 (0) 1924 487000 fax +44 (0) 1924 487038 www.parker.com/eurofilt Parker Hannifin Oy Filtration Division Salmentìe 260 FI-31700 Urjala as. Finland phone +358 20 753 2500 fax +358 20 753 2501 www.parker.com/fi domnick hunter Filter Division Durham Road, Birtley Co. Durham, DH3 2SF England phone +44 (0) 191 410 5121 fax +44 (0) 191 410 2532 www.domnickhunter.com Parker Korea Ltd. 777 Jung-Ri Dongtan-Myeon, Hwaseong-City Kyunggi-Do, 445-813 Korea phone +82 31 379 2200 fax +82 31 377 9710 www.parker.com/korea Parker Hannifin Africa Pty Ltd. Parker Place, 10 Berne Avenue, Aeroport Kempton Park, 1620 South Africa phone +27 11 9610700 fax +27 11 3927213 www.parker.com/eu Parker Hannifin Japan Ltd 626, Totsuka- cho, Totsuka-ku Yokohama-shi, 244-0003 Japan phone +81 45 870 1522 fax +81 45 864 5305 www.parker.com/japan Parker Worldwide Sales Offices Contact Parker s worldwide service and distribution network by calling: Argentina +54 3327 44 4129 Australia +61 2 9 634 7777 Austria +43 2622 23501 0 Belgium +32 67 280900 Brazil +55 12 4009 3500 Canada 1 800 272 7537 Central & South America/Caribbean 1 305 470 8800 Chile +56 2 623 1216 China +86 21 6445 9339 Czech Republic +42 0 2 830 85 221 Denmark +45 0 43 56 04 00 Finland +358 03 54100 France +33 0 254 740304 Germany +49 0 2131 4016 0 Hong Kong +852 2 428 8008 Hungary +36 1 220 4155 India +91 22 5613 7081 82 83 84 85 Italy +39 02 451921 Japan +81 3 6408 3900 Jordan +962 6 810679 Korea Choongnam +82 41 583 1410 Korea Kyoungnam +82 55 389 0100 Korea Seoul +82 2 559 0420 Mexico 1 800 272 7537 Netherlands +31 0 541 585000 New Zealand +64 09 574 1744 Norway +47 64 91 1000 Poland +48 22 863 4942 Singapore +65 6261 5233 South Africa +27 11 961 0700 Spain +34 91 675 7300 Sweden +46 8 5979 5000 Switzerland +41 0 22 307 7111 Taiwan +886 2 2298 8987 Thailand +66 2717 8140 United Arab Emirates +971 2 6788587 United Kingdom +44 0 1924 487000 USA 1 800 272 7537 Venezuela +58 212 238 54 22 2008 Parker Hannifin Corporation Parker Hannifin Corporation Racor Division P.O. Box 3208 3400 Finch Road Modesto, CA 95353 phone 800 344 3286 209 521 7860 fax 209 529 3278 www.parker.com/racor www.parker.com/racorproducts 7702 (September 2008)