0JD, , UK

0. w w w. m o v e x i i. c o m

Tab & Magnetic corner tracks Curve Tipologia di curve ) Magnetiche - ) Tab - ) Bevel Caratteristiche delle curve magnetiche La curva magnetica rappresenta il sistema più efficace ed affidabile per trasportatori con catene a cerniera. Le nostre curve magnetiche sono prodotte da lastre di UHMW-PE di elevata qualità con magneti permanenti alloggiati all interno della lastra. I magneti mantengono la catena nella via tracciata in curva garantendo la planarità della superficie di trasporto della catena, migliorando la stabilità del prodotto trasportato. Vantaggi - Igiene: La catena sulla via di scorrimento in curva può essere facilmente sollevata per consentire più facilmente pulizia e manutenzione. Intercambiabilità: Catene in plastica e in acciaio possono essere utilizzate sulle nostre curve semplificando progetto/realizzazione del trasportatore e consentendo di ridurre scorte di ricambi a magazzino. Materiali: La parte superiore delle nostre curve è ottenuta da UHMW-PE di elevata qualità che consente una più lunga durata di catene e delle stesse curve. Attrito: I magneti vengono accuratamente selezionati e posizionati per garantire il campo magnetico più idoneo al mantenimento della catena nella sede. Un campo magnetico troppo elevato aumenta l attrito e riduce la durata di curva e catena. Corner Tracks Types of Corner Track ) Magnetic - ) Tab - ) Bevel Characteristics of Magnetic Corner Tracks The magnetic corner track is the most effective and reliable system for the table top conveyor design. Our magnetic corner tracks are made of high quality UHMW PE with permanent magnets embedded in the curve. The magnets hold the chain on the corner track and this provides a flat carrying surface for the chain; thus, improving product stability and support for the conveyor. Benefits - Hygiene: Chains on the magnetic corner tracks can be easily lifted such that it is easier for cleaning and maintenance. Inter-changeable: Plastic and S.S. chains can be used on the curve thus reducing inventory and simpler conveyor design. Materials: The upper track of the corner tracks uses high quality UHMW-PE which gives a longer wear life for both the chain and the curve. Frictional force: Magnets are carefully selected and positioned to provide the correct magnetic field which is just sufficient to keep the chain down. Too high a magnetic force will increase the frictional force and reduces wear life of both chains and curve. Kurvenführungen Typen ) Magnet - ) TAB - ) Schwalbenschanz Charakteristik der Magnet-Kurvenführung Die Magnet-Kurvenführung ist das effektivste und bewährteste System für Transporteure mit Scharbierbandketten. Unsere Magnetkurven sind aus hochwertigem UNME- PE mit permanenten in die Führung eingebetteten Magneten ausgeführt. Die Magnete halten die Scharnierbandkette in der Führung und dies resultiert in einem ruhigen Lauf der Kette, damit wird eine bessere Produktstabilität erreicht. Vorteile - Hygiene: zur Reinigung können die Scharnierband-Ketten einfach, ohne großen Aufwand, aus der Führung herausgenommen werden. Dies erspart Zeit und verkürzt die Standzeiten. Versatilität: Kunststoff- als auch Edelstahl-Scharnierband-Ketten können mit dieser Kurvenführung verwendet werden, dies vereinfacht die Konstruktion des Transporteurs und reduziert die Lagerhaltung. Materialien: Das Oberteil der Magnetkurve ist aus hochwertigem UHMW-PE gefertigt und bietet eine längere Standzeit nicht nur für die Führung sondern auch für die Scharnierbandkette. Reibung: Die Magnete sind so angeordnet und ausgewählt um ein homogenes und konstantes Magnetfeld zu erzeugen um ein ruhiges und rückenfreies Laufen der Kette zu gewährleisten. www.movexii.com Product Catalog 5

Curve magnetiche / Magnetic curves / Magnet Kurven Series 0- Rm500 Series 0- Rm500 Series 0- Rm500 Series 0- Rm500 Series 0- Rm0 Series 0- Rm0 pag. pag. 9 pag. 50 pag. 5 pag. 5 pag. 5 Series 0- Rm0 Series 0- Rm0 Series 0- K50 - Rm500 Series 0- K50 - Rm Series 0- K0 - Rm Series 0- K0 - Rm0/0/00 pag. pag. 55 pag. 5 pag. 57 pag. 5 pag. 59 Series -57 K0 - Rm Series -57 K0 - Rm0 Series -57 K0 - Rm0 Series -57 K0 - Rm00 Series -57 K00 - Rm0 Series -57 K00 - Rm0 pag. 0 pag. pag. pag. pag. pag. 5 Product Catalog www.movexii.com

Tab & Magnetic corner tracks Curve magnetiche / Magnetic curves / Magnet Kurven Series LBP K0 - Rm0 Series LBP K00 - Rm0 Series LBP K00 - Rm0 Series 0M-0M Series M pag. pag. 7 pag. pag. 9 pag. 70 Curve Tab / Tab curves / Tab Kurven Series 0- K - K50 - K0 Series K0 - K00 - K00 pag.7 pag. 7 www.movexii.com Product Catalog 7

0- M Series Materiale: Material: Materialien: Curva Larghezza Base = 0 mm; Passo = 5 mm / Curve Basic Width = 0 mm; Pitch = 5 mm / Kurve Basisbreite = 0 mm; Teilung = 5 mm 79M K 0M K 0M K0 M K M K0 0 0.5 7 Rm=500 TRACK 50 5 7 mm - 50 mm 0 5 M MULTI TRACK Part 5 0 5 0 90 Tracks W 70 70 70 70 70 70 70 70 70 70 70 70 70 70 707 70 70 70 70 70 70 70 707 70 70 70 70 70 70 70 707 70 70 70 70 70 70 70 707 70 70 705 705 705 705 70 7057 70 70 70 70 70 70 70 707 70 5 7 0 5 70 5 0 5 95 Product Catalog www.movexii.com

Materiale: Material: Materialien: M7 Series 0- Curva Larghezza Base = 0 mm; Passo = 5 mm / Curve Basic Width = 0 mm; Pitch = 5 mm / Kurve Basisbreite = 0 mm; Teilung = 5 mm 79M K 0M K 0M K0 M K M K0 0 0 0.5 55 7 Rm=500 TRACK 50 5 7 mm - 50 mm 5 M MULTI TRACK Part 5 0 5 0 90 Tracks W 70 70 70 70 70 70 70 70 70 700 700 700 7050 70 7070 70 70 700 700 700 700 700 7070 700 70 700 700 700 700 700 7070 700 70 700 700 700 7050 700 7070 700 705 7050 7050 700 70550 7050 70570 7050 70 700 700 700 7050 70 7070 70 5 7 0 5 70 5 0 5 95 www.movexii.com Product Catalog 9

0- M Series Materiale: Material: Materialien: Curva Larghezza Base = mm; Passo = 5 mm / Curve Basic Width = mm; Pitch = 5 mm / Kurve Basisbreite = mm; Teilung = 5 mm 79M K 0M K 0M K0 M K M K0.5 7 Rm=500 TRACK 55 5 7 mm - 50 mm - without 0 5 M MULTI TRACK Part 5 0 5 0 90 Tracks W 7 7 7 7 7 7 7 7 7 7 7 7 7 7 77 7 7 7 7 7 7 7 77 7 7 7 7 7 7 7 77 7 7 7 7 7 7 7 77 7 7 7 7 7 7 7 7 7 7 7 77 7 5 7 95 0 50 5 0 705 50 Product Catalog www.movexii.com

Materiale: Material: Materialien: M Series 0- Curva Larghezza Base = mm; Passo = 5 mm / Curve Basic Width = mm; Pitch = 5 mm / Kurve Basisbreite = mm; Teilung = 5 mm 79M K 0M K 0M K0 M K M K0.5 7 Rm=500.5.5 TRACK 55.5 5 7 mm - 50 mm - without 0 5 M.5 MULTI TRACK Part 5 0 5 0 90 Tracks W 7 7 7 7 7 7 7 7 7 7 7 7 7 7 77 7 7 7 7 7 7 7 77 7 7 7 7 7 7 7 77 7 7 7 7 7 7 7 77 7 7 7 7 7 7 7 7 7 7 7 77 7 5 7 9 5 5 70 www.movexii.com Product Catalog 5

0- M Series Materiale: Material: Materialien: Curva Larghezza Base = 0 mm; Passo = 5 mm / Curve Basic Width = 0 mm; Pitch = 5 mm / Kurve Basisbreite = 0 mm; Teilung = 5 mm 79M K 0M K 0M K0 M K M K0 0 0 0.5 55 7 Rm=0 TRACK 50 5 7 mm - 50 mm - without 0 5 M MULTI TRACK 70 70 70 70 70 70 70 70 70 70 70 70 70 70 707 70 5 7 0 5 70 5 0 5 95 5 Product Catalog www.movexii.com

Materiale: Material: Materialien: M Series 0- Curva Larghezza Base = mm; Passo = 5 mm / Curve Basic Width = mm; Pitch = 5 mm / Kurve Basisbreite = mm; Teilung = 5 mm 79M K 0M K 0M K0 M K M K0.5 7 Rm=0.5.5 TRACK 55.5 5 7 mm - 50 mm - without 0 5 M.5 MULTI TRACK 7 7 7 7 7 7 7 7 7 7 7 7 7 7 77 7 5 7 9 5 5 70 www.movexii.com Product Catalog 5

0- M9 Series Materiale: Material: Materialien: Curva Larghezza Base = mm; Passo = 90 mm / Curve Basic Width = mm; Pitch = 90 mm / Kurve Basisbreite = mm; Teilung = 90 mm 79M K 0M K 0M K0 M K M K0 0.5 55 7 Rm=0 TRACK 55 90 7 mm - 50 mm - without 0 90 0 55 M MULTI TRACK 7 7 7 7 7 7 7 7 7 7 7 7 7 7 77 7 5 7 00 90 0 70 50 50 70 Product Catalog www.movexii.com

Materiale: Material: Materialien: M5C Series 0- Curva Larghezza Base = 0 mm; Passo = 5 mm / Curve Basic Width = 0 mm; Pitch = 5 mm / Kurve Basisbreite = 0 mm; Teilung = 5 mm 79M K 0M K 0M K0 M K M K0 0 0 0.5 55 7 Rm=0 TRACK 0 mm - 50 mm - without M 70 70 0 www.movexii.com Product Catalog 55

0- K50 MA Series Materiale: Material: Materialien: Curva Larghezza Base = 9 mm; Passo = 0 mm / Curve Basic Width = 9 mm; Pitch = 0 mm / Kurve Basisbreite = 9 mm; Teilung = 0 mm 79M K50 0M K50 M K50 9 9.5 Rm=500.5.5 0 M 7 0 mm - 50 mm - without.5 0 TRACK 7.5 MULTI TRACK 5 55 5 9 9 9 9 09 5 Product Catalog www.movexii.com

Materiale: Material: Materialien: MA Series 0- K50 Curva Larghezza Base = 9 mm; Passo = 0 mm / Curve Basic Width = 9 mm; Pitch = 0 mm / Kurve Basisbreite = 9 mm; Teilung = 0 mm 79M K50 0M K50 M K50 9 9.5 Rm=.5.5 7 0 mm - 50 mm - without 0 M.5 0 TRACK 7.5 MULTI TRACK 70 70 70 70 70 70 70 70 705 705 5 9 9 9 9 09 www.movexii.com Product Catalog 57

0- K0 M Series Materiale: Material: Materialien: Curva Larghezza Base = mm / Curve Basic Width = mm / Kurve Basisbreite = mm.5 7 Rm= 0 0M K0 M K0 0 mm - 50 mm - without M 7 7 5 Product Catalog www.movexii.com

Materiale: Material: Materialien: M Series Rm=0 M Series Rm=0 M5 Series Rm=00 0- K0 Curva Larghezza Base = mm / Curve Basic Width = mm / Kurve Basisbreite = mm 0 55 7.5 0 Rm 0M K0 M K0 mm - 0 mm - 50 mm M Rm 707 707 707 707 707 7079 0 0 00 www.movexii.com Product Catalog 59

-57 K0 M Series Materiale: Material: Materialien: Curva Larghezza Base = 00 mm / Curve Basic Width = 00 mm / Kurve Basisbreite = 00 mm 7 00 00 0 Rm= 5 5 TRACK 0 mm - 0 mm - without 0 95 M K0 57M K0 7 0 M 5 9 5 9 MULTI TRACK 77 77 77 77 77 77 77 77 00 95 590 0 Product Catalog www.movexii.com

Materiale: Material: Materialien: M5 Series -57 K0 Curva Larghezza Base = 00 mm / Curve Basic Width = 00 mm / Kurve Basisbreite = 00 mm M K0 57M K0 7 00 00 0 0 0 55 Rm=0 5 5 TRACK mm - 0 mm - without 7 0 0 95 M 5 9 5 9 MULTI TRACK 7 7 7 7 7 7 00 95 590 www.movexii.com Product Catalog

-57 K0 M Series Materiale: Material: Materialien: Curva Larghezza Base = mm; Passo = 00 mm / Curve Basic Width = mm; Pitch = 00 mm / Kurve Basisbreite = mm; Teilung = 00 mm 0 7 M Rm=0 0 5 55 TRACK M K0 57M K0 mm 0 mm 50 mm 7 0 00 7 5 7 5 7 MULTI TRACK 70 70 70 70 700 700 0 Product Catalog www.movexii.com

Materiale: Material: Materialien: M0 Series -57 K0 Curva Larghezza Base = 00 mm / Curve Basic Width = 00 mm / Kurve Basisbreite = 00 mm 00 00 0 0 0 55 7 Rm=00 5 5 TRACK M K0 57M K0 mm - 0 mm - without 7 0 0 95 M 5 9 5 9 MULTI TRACK 79 79 79 799 799 799 00 95 590 www.movexii.com Product Catalog

-57 K00 M9 Series Materiale: Material: Materialien: Curva Larghezza Base = 70 mm / Curve Basic Width = 70 mm / Kurve Basisbreite = 70 mm 70 70 0 7 M 0 0 Rm=0 M K00 mm - 0 mm - 50 mm 709 709 70 Product Catalog www.movexii.com

Materiale: Material: Materialien: M97 Series -57 K00 Curva Larghezza Base = 0 mm / Curve Basic Width = 0 mm / Kurve Basisbreite = 0 mm 0 0 0 M 7 5 5 Rm=0 M K00 mm - 0 mm - 50 mm 7 7 0 www.movexii.com Product Catalog 5

LBP K0 MP Series Materiale: Material: Materialien: Curva Larghezza Base = mm / Curve Basic Width = mm / Kurve Basisbreite = mm 0 7 79 5 50.5 LBP M K0 Rm=0 M mm - 0 mm - 50 mm 7 7 Product Catalog www.movexii.com

Materiale: Material: Materialien: MP9 Series LBP K00 Curva Larghezza Base = 90 mm / Curve Basic Width = 90 mm / Kurve Basisbreite = 90 mm 0 50.5 7 7 5 90 90 LBP M K00 Rm=0 M mm - 0 mm - 50 mm 7 7 90 www.movexii.com Product Catalog 7

LBP K00 MP9 Series Materiale: Material: Materialien: Curva Larghezza Base = 0 mm / Curve Basic Width = 0 mm / Kurve Basisbreite = 0 mm 0 50.5 7 5 0 0 LBP M K00 Rm=0 M mm - 0 mm - 50 mm 7 7 0 Product Catalog www.movexii.com

Materiale: Material: Materialien: MB7 Series 0M-0M Curva Larghezza Base = 0 mm; Passo = 5 mm / Curve Basic Width = 0 mm; Pitch = 5 mm / Kurve Basisbreite = 0 mm; Teilung = 5 mm 0M K0 0M K0 0 0.5 TRACK 50 5 7 5 55 7 Rm=500 mm - 0 mm - 50 mm 5 5 M MULTI TRACK 705 705 705 705 705 705 705 705 705 7050 7050 700 70550 705 70570 705 5 7 0 5 70 5 0 5 95 www.movexii.com Product Catalog 9

M MC7 Series Materiale: Material: Materialien: Curva Larghezza Base = 0 mm; Passo = 5 mm / Curve Basic Width = 0 mm; Pitch = 5 mm / Kurve Basisbreite = 0 mm; Teilung = 5 mm M K0 0 0 TRACK 50 5 7 0 5.5 55 7 Rm=500 5 mm - 0 mm - 50 mm 5 55 5 5 M 5 MULTI TRACK 70 70 70 70 70 70 70 70 70 700 700 700 7050 70 7070 70 5 7 0 5 70 5 0 5 95 70 Product Catalog www.movexii.com

Materiale: Material: Materialien: Curve Rm=500 Curves Rm=500 Kurven Rm=500 0- TAB Curva 0- TAB K-K50-K0 / Curve 0- TAB K-K50-K0 / Kurve 0- TAB K-K50-K0 Pitch. 50 50 9.5 5 70 TAB System Rm Rm Pitch 70 70 70 70 70 70 70 70 70 70 705 70 K 5 0 5 70 5 0 5 500 5 7 7 7 7 7 7 7 7 7 7 7 7 K50 5 0 0 70 90 70 0 7 7 7 7 7 7 7 7 K0 00 95 590 95 www.movexii.com Product Catalog 7

TAB Curve Rm= Curves Rm= Kurven Rm= Materiale: Material: Materialien: Curva TAB K0-K00-K00 / Curve TAB K0-K00-K00 / Kurve TAB K0-K00-K00 Pitch. 50 50 9 0 5 5 90 TAB System Rm Rm Pitch 7 7 7 7 7 7 7 7 K0 00 95 590 95 7 7 7 7 7 7 7 7 K00 70 50 790 50 0 7 7 7 7 7 7 7 7 K00 0 0 90 0 7 Product Catalog www.movexii.com

Movex S.r.l. Industrial Innovations Via Tasso (angolo Via Noli Marenzi) 00 Telgate (Bergamo) - Italy Phone +9.0.97 Fax +9.0.07 Movex France - Sales Office Phone +.0.0..99.7 Fax +.09.70..50.9 Movex GmbH Industrial Innovations Alfred-Nobel-Strasse, 59 Viernheim - Germany Phone +9.(0)0.9-0 Fax +9.(0)0.9-55 Movex Nederland - Sales Office Phone +.(0)0.99..50 Movex Industrial Innovations UK Ltd. Unit 7, Dene Valley Business Centre Kineton CV 0JD, Warwickshire - UK Phone +.9.9 Movex Singapore - Sales Office Phone +5.95.0 www.movexii.com