PARTS LIST INTRAAX AAT 23K, 25K, 30K. LIT NO: L405 DATE: January 2018 REVISION: M

Similar documents
PARTS LIST INTRAAX AAEDL. LIT NO: L1058 DATE: June 2016 REVISION: B

PARTS LIST INTRAAX AAL 23K / 25K / 30K. LIT NO: L1060 DATE: February 2018 REVISION: B

PARTS LIST INTRAAX AANT 23K. LIT NO: L1057 DATE: April 2018 REVISION: F

PARTS LIST INTRAAX AAT 23K, 25K, 30K LIT NO: L405

PARTS LIST HT250US UNDERSLUNG. LIT NO: L582 DATE: February 2017 REVISION: E

PARTS LIST HT300U UNDERSLUNG. LIT NO: L940 DATE: January 2018 REVISION: B

PARTS LIST VANTRAAX HKAT 69K25. LIT NO: L1079 DATE: October 2016 REVISION: D

PARTS LIST VANTRAAX HRRNT 40K. LIT NO: L1083 DATE: January 2012

PARTS LIST VANTRAAX HKANT 40K/ HKA180. LIT NO: L649 DATE: July 2015 REVISION: D

PARTS LIST HT250U UNDERSLUNG LIT NO: L938

PARTS LIST HT250US LIT NO: L582

PARTS LIST VANTRAAX HKANT 40K/ HKA180 LIT NO: L649

INTRAAX TOP-MOUNT SPECIFICATIONS AANT 23K / AAT 23K / AAT 25K AAT 30K / AAEDT 30K TABLE OF CONTENTS. LIT NO: L600 DATE: February 2017 REVISION: I

PARTS LIST INTRAAX AAT 23K, 25K, 30K, AAEDT 30K AND AANT 23K

Technical TRAILER SUSPENSION SYSTEMS. SUBJECT: Recommended Ride Height Settings. LIT NO: L388 DATE: September 2017 REVISION: H

INTRAAX LOW-RIDE SPECIFICATIONS AANLS 20K/AANL 23K/AAL 23K/ AAL 25K/AAL 30K/AAEDL 30K TABLE OF CONTENTS. LIT NO: L729 DATE: February 2017 REVISION: J

PARTS LIST SURELOK TABLE OF CONTENTS. LIT NO: L1055 DATE: October 2017 REVISION: E

LIFTABLE SUSPENSION GUIDE TRAILER COMMERCIAL VEHICLE SYSTEMS

Technical Procedure TRAILER SUSPENSION SYSTEMS TABLE OF CONTENTS

PARTS LIST UBL UNDER BEAM LIFT. LIT NO: L757 DATE: July 2018 REVISION: G

TABLE OF CONTENTS TIREMAAX PRO AND TIREMAAX CP

PARTS LIST TIREMAAX. Table of Contents. LIT NO: L878 DATE: September 2013 REVISION: I. ControllerS...2. Axle and wheel Components...

TECHNICAL PROCEDURE HENDRICKSON AIR-RIDE SUSPENSIONS

Technical Procedure. SUBJECT: Operation, Maintenance and Retrofit Procedures. DATE: February 2018

PARTS LIST AAT230/250 INTRAAX TRAILER SUSPENSION SYSTEM

INTRAAX. - Maximize value - Maximize performance - Proven reliability. Integrated Trailer Air Suspension / Axle / Brake Systems

ORDERING GUIDE INTRAAX SUSPENSION HENDRICKSON USE ONLY. LIT NO: L602 DATE: January 2018 REVISION: II

TECHNICAL PROCEDURE INTRAAX SUSPENSION SYSTEMS TABLE OF CONTENTS

PARTS LIST EDT300 INTRAAX TRAILER SUSPENSION SYSTEM

PARTS LIST AANT230 INTRAAX TRAILER SUSPENSION SYSTEM

TECHNICAL PROCEDURE Trailer SuSpenSion, axle, Wheel-end, & Brake SySTemS SuBJeCT: lit no: date: TaBle of ConTenTS important Safety information 2

INTRAAX AANLS 20K / AAL 23K / AAL 25K AAL 30K /AAEDL 30K

TRUCK & TRAILER SUSPENSION PARTS CEDAR RAPIDS th Ave. S.W.

PARTS LIST INTRAAX AANT230 ZMD TRAILER SUSPENSION SYSTEM. LIT NO: DATE: November 2018 REVISION: B

TECHNICAL PROCEDURE HENDRICKSON SUSPENSION SYSTEMS

PRIMAAX EX PRIMAAX Rear Air Suspension for Mack Vehicles

INFLATION ALONE IS NOT ENOUGH Control your tires with

INFLATION ALONE IS NOT ENOUGH Control your tires with

RTR READY-TO-ROLL. Trailer Suspension and Axle Systems

PRIMAAX EX Rear Air Suspension for Caterpillar Vehicles Built PRIOR to 2/2016

AIRTEK Front System for Volvo Vehicles

TIREMAAX PRO. INFLATION ALONE IS NOT ENOUGH Control your tires with. the industry s first tire pressure control system

PRIMAAX EX / PRIMAAX Rear Air Suspension for International Truck Vehicles

AIRTEK Front System for Mack Vehicles

Equalizing Beam and Components

VANTRAAX Air-Ride Slider Suspension Systems

CONTROLS. Parts Catalog

IDENTIFICATION GUIDE TRAILER SUSPENSION AND AXLE SYSTEMS TABLE OF CONTENTS. LIT NO: L977 DATE: September 2017 REVISION: G

TECHNICAL PROCEDURE. SUBJECT: Hub Maintenance Procedures. DATE: March 2018

TECHNICAL PROCEDURE NON-STEERABLE SUSPENSION SYSTEMS

COMPOSILITE SC. - Winning reputation - Optimum performance - Reliability - Leading innovation - Durability. Steerable Lift Axles

RT / RTE Rear Suspension

East Manufacturing Corporation 1871 State Route 44 * P O Box 277 Randolph, Ohio Toll Free (800) Fax (330)

HAS Rear Air Suspension

ORDERING GUIDE INTRAAX -SP PLATFORM SLIDER SUSPENSION

RT /RTE Series Frame Hangers

Subject: Align-Trac Procedures. Lit No: LIT1004 Date: 05/30/2015 Revision: A

HAULMAAX 400/460 Rear Suspension

HAULMAAX 40K 46K Rear Suspension

R Rear Suspension R 48K 52K R 40K 46K R 65K R 85K 100K 120K CONTENTS. LIT NO: SP-167 DATE: January 2017 REVISION: D

COMPOSILITE SC. - Winning reputation - Optimum performance - Reliability - Leading innovation - Durability

RT/RTE Series RT/RTE-340/343/ 400/403/460/463 RT/RTE-480/ 503/520/523 HEAVY DUTY RT-650 LIT NO: SP-168

APPLICATION GUIDE HENDRICKSON AIR DISC BRAKES

Truck Suspension Past Generation Products

AIRTEK for Volvo Vehicles Single to Dual Height Control Valve Conversion Kit

CONTROLS Parts Catalog TRAILER CONTROL SYSTEMS

AR2 40K 46K Rear Air Suspension

AIRTEK for Mack Vehicles Single to Dual Height Control Valve Conversion Kit

SOFTEK / AIRTEK Front Suspension System for FCCC Motorhome Chassis

PRIMAAX. - MAAXimize durability - MAAXimize driver comfort - MAAXimize performance. Severe-Duty Vocational Air Suspension

PARTS LIST TRAILER BRAKE SYSTEMS. LIT NO: DATE: October 2017 REVISION: H

Frame Bracket Side Plate Repair Procedures

Meritor CS9A Air Suspension

CONTENTS. Height Control Valves 3. Air Springs 4. Shock Absorbers 4. Leaf Spring Assemblies 4. Tie Rods 6 REAR SUSPENSIONS.

Hazard Alert Messages. Kits Required. How to Obtain Additional Maintenance, Service and Parts Information. How to Obtain Tools, Kits and Supplies

Technical Procedure. Hendrickson Extended life. Maintenance Procedures

RT / RTE Rear Suspension

WARRANTY TRAILER SUSPENSION SYSTEMS

Welding and straightening operations are not permitted on load-bearing or wheelcontrolling

TECHNICAL BULLETIN TRAILER SUSPENSION CRITICAL TORQUE SPECIFICATIONS. LIT NO: A DATE: May 2018 REVISION: D

Installing RideSentry Suspension Axle Seats onto RideStar RHP Series Single-Axle and Sliding Tandem Trailer Air Suspension Systems

One Step Ahead Rod Cutter (Front Mount Unit)

OPTIM Mold Service Table YOUR MOLD WILL ALWAYS HAVE THE BEST SEAT AT THE TABLE

GR 4.0 Liter To Chevy Trans Adapter Kit GR 4.0 Liter Bell Housing Adaptor GR 4.0 Liter Flexplate Adaptor

(gd8) 5/8 x 18 x (2) machined

PRIMAAX EX PRIMAAX Rear Air Suspension for Kenworth Vehicles

TECHNICAL PROCEDURE TRAILER SUSPENSIONS SYSTEMS

KT AIR SUSPENSION (Engineering Lit. No. KL006)

INSTALLATION AND MAINTENANCE MANUAL

KI AIR SUSPENSION (wide Pivot Bush)

MERITOR MTA TRAILER SUSPENSION SYSTEMS

WARRANTY Hendrickson Trailer Commercial Vehicle Systems. SUBJECT: Comprehensive Warranty Statement USA and Canada

BH200 SERIES ROTARY CUTTER

RJS2021 LTO SPORT OVAL RACER LESS ELECTRICS

FLEXIRIDE Rubber Torsion Axles

PERFORMANCE SUSPENSION PARTS

PRIMAAX EX FIREMAAX EX/ PRIMAAX FIREMAAX Series Heavy-duty Rear Air Suspension

PRIMAAX EX FIREMAAX EX PRIMAAX FIREMAAX Series Heavy-duty Rear Air Suspension

AIRFLEX Light Trailer Suspension System

TECHNICAL PROCEDURE. SUBJECT: Alignment Procedures. DATE: November 2017

Transcription:

PARTS LIST INTRAAX AAT 23K, 25K, 30K LIT NO: L405 DATE: January 2018 REVISION: M

INTRAAX AAT 23K, 25K, 30K PARTS LIST 16 5 6 8 15 15 11 13 16 8 Pedestal Components Detail (Call Hendrickson for assistance) 7 Bolt-on C-channel 12 10 2 14 1 Five inch axle, weld-on pedestal (obsolete) LDA Axle, cast pedestal LDA Axle, steel weldment 2

ITEM DESCRIPTION PART NO. INTRAAX AAT 23K, 25K, 30K PARTS LIST PER AXLE 1. Options exist based on frame attachment, frame bracket style, bolt hole pattern and connection. Contact Hendrickson for assistance or refer to L1266 Frame Bracket parts list. 2. Struts are only optional for bolt-on frame brackets. Other options exist for galvanized or different track widths. 3. Please see INTRAAX Bolt-on Mounting Drawing, D-26651, for assistance in pattern selection. This drawing can be found in the literature section of the Hendrickson website (www.hendrickson-intl.com). 4. Standard options listed. Other options exist. Please contact Hendrickson for assistance. 5. Picture may not resemble all models. 6. Kits listed are for units with standard travel, standard air spring hardware and standard air spring mounting plate. Components may vary for limited rebound, limited jounce, thick frame or steel spacer models. NOTE 1 AXLE/BEAM WELDMENT HTRAAX.XX Contact Hendrickson for assistance 2 FRAME BRACKET 1 See L1266 Frame Bracket Parts List 3 FRAME BRACKET GUSSET (Not Shown) S-27330 2 13.5" to 19" ride heights 4 FRAME BRACKET BRACE (Not Shown) B-2347-7 1 16" 17" ride heights 5 BOLT-ON C-CHANNEL KIT 2 71.5" track S-31901-3C 1 Standard black primer; includes c-channel, 2 struts and strut bolt kit 77.5" track S-31901-1C 1 Standard black primer; includes c-channel, 2 struts and strut bolt kit 6 STRUT 2 B-30591 2 7 C-CHANNEL BOLT KIT S-29822 1 Includes 2 screws and 2 prevailing torque nuts 8 STRUT BOLT KIT S-30720 1 Includes 6 screws and 6 prevailing torque nuts 9 WELD-ON C-CHANNEL (Not Shown) 71.5" - 77.5" Tracks A-1631-19 1 13.5" to 19" ride heights 83.5" - 85" Tracks A-1621-35 1 13.5" to 19" ride heights 10 AIR SPRING AAT 23K models S-21800 2 13.5" to 19" ride heights AAT 25K models S-20901 2 13.5" to 19" ride heights AAT 30K models S-25873 2 13.5" to 19" ride heights 11 AIR SPRING MOUNTING PLATE Weld-on S-20905 2 12" 19" ride heights; standard air spring mounting plate Bolt-on 3 B-21145 2 13.5" 19" ride heights; standard air spring mounting plate B-21715 2 13.5" 19" ride heights; pattern 1 air spring mounting plate B-22390 2 13.5" 19" ride heights; pattern 2 air spring mounting plate B-27264 2 13.5" 19" ride heights; pattern 3 air spring mounting plate 12 AIR SPRING FLEX PLATE B-23294 Not required for units with LDA (30K MODELS ONLY) (5" axle) 13 AIR SPRING SPACER (Plastic) 4 5" axle Flex Plate required 15" ride height S-22510-1 2 1 1 / 8" thick spacer 16" ride height S-22510-2 2 1 7 / 8" thick spacer 17" ride height S-22510-3 2 3 1 / 8" thick spacer LDA Large-Diameter Axle 16" and 18" ride height S-22510-4 2 ¾" Thick spacer 19" ride height S-22510-2 2 1 7 / 8" Thick spacer 14 AIR SPRING BOTTOM DISK (5" axle) S-21786 15 AIR SPRING MOUNTING KITS 5,6 One per air spring; Includes air fittings, hex flange nuts, plugs and extension nuts 5" and LDA Large-Diameter Axle 13.5", 14", 15" ride heights S-22619/2 2 16" and 18" ride heights S-22630/2 2 17" ride height S-22619/2 2 19" ride height S-22631/2 2 3

INTRAAX AAT 23K, 25K, 30K PARTS LIST 19a 19c 19b Pedestal Components Detail (Call Hendrickson for assistance) Bolt-on C-channel 23 19c 18b 23 20 22 18a 19c 20 19b 21 24 19a 19b 19c 20 23 20 Five inch axle, weld-on pedestal (obsolete) LDA Axle, cast pedestal LDA Axle, steel weldment 4

ITEM DESCRIPTION PART NO. INTRAAX AAT 23K, 25K, 30K PARTS LIST PER AXLE 16 AIR SPRING PEDESTAL KITS Includes 2 pedestals, 4 nuts, and 4 screws LDA and Five Inch Axle: Standard Travel (or) Limited Rebound Travel 13.5" 14" ride heights S-32164-1 2 Kit uses bolt-on cast pedestals D-36230-1L/1R 15" 16" ride heights S-32164-2 2 Kit uses bolt-on steel pedestals D-30827-2L/2R 17" 19" ride heights S-32164-3 2 Kit uses bolt-on steel pedestals D-30827-3L/3R LDA and Five Inch Axle: Limited Jounce Travel Not available on 13.5", 18", 19" ride heights 14" 15" ride heights S-32164-2 2 Kit uses bolt-on steel pedestals D-30827-2L/2R 16" 17" ride heights S-32164-3 2 Kit uses bolt-on steel pedestals D-30827-3L/3R 5" Axle (Weld-On) Pedestal 13.5" 19" ride heights S-32164-1 2 Use bolt-on S-32164-1. Follow directions on B-32164 drawing. Weld-on option obsolete. Replace with bolt-on number listed above. 17 AIR SPRING SPACER ASSEMBLY (Not Shown) Contact Hendrickson for assistance 18 ALIGNMENT COLLARS 18a Eccentric S-20925 2 Pivot hole is offset from the center of collar 18b Concentric S-20924 2 Pivot hole is in center of collar 19 QUIK-ALIGN PIVOT BOLT KIT 7 19a Pivot bolt kit S-24679 2 Includes 10" shear-type bolt, nut, and washers 19b Pivot bolt kit w/bushing tube spacers S-26369 2 Includes 10" shear-type bolt, nut, washers, and bushing tube spacers 19c Pivot bolt kit w/alignment collars S-24680 2 Includes 10" shear-type bolt, nut, washers, and alignment collars 20 TRI-FUNCTIONAL BUSHING KIT 5,7,8 Standard S-24691 2 Includes bushing, pivot bolt kit (Item 19), bushing tube spacer and lube Pivot bushing kit w/alignment collars S-28654 1 Includes 2 bushings, 2 pivot bolt kits, bushing tube spacers and lube 21 BUSHING TUBE SPACERS S-21099 4 4 required per axle; Standard 22 FRONT SHOCK ABSORBER Standard duty S-23566 2 For use on 23K and 25K models Limited rebound S-23361 2 For use on 23K and 25K models Extended service with high dampening S-24023 2 For use on all 30K models, and some 23K and 25K models 23 SHOCK ABSORBER BOLT KIT One 1 required per shock 23K and 25K models shipped before 8/11/95 S-20896/2 2 23K and 25K models shipped after 8/11/95 S-24021 2 30K front mounted shock S-24021 2 30K rear mounted shock S-20031/2 2 24 SHOCK SPACER S-27196 2 NOTE 7. Best installed with Hendrickson s E-20 socket S-24536 (1-inch drive) or S-24303 (3/4-inch drive) 8. Bushing tool, S-21307 is required to correctly rebush the suspension. 5

INTRAAX AAT 23K, 25K, 30K PARTS LIST NOTES: 6

INTRAAX AAT 23K, 25K, 30K PARTS LIST NOTES: 7

Call Hendrickson at 330.489.0045 or 866.RIDEAIR (743.3247) for additional information. www.hendrickson-intl.com TRAILER COMMERCIAL VEHICLE SYSTEMS 2070 Industrial Place SE Canton, OH 44707-2641 USA 866.RIDEAIR (743.3247) 330.489.0045 Fax 800.696.4416 Hendrickson Canada 250 Chrysler Drive, Unit #3 Brampton, ON Canada L6S 6B6 800.668.5360 905.789.1030 Fax 905.789.1033 Hendrickson Mexicana Circuito El Marqués Sur #29 Parque Industrial El Marqués Pob. El Colorado, Municipio El Marqués, Querétaro, México C.P. 76246 +52 (442) 296.3600 Fax +52 (442) 296.3601 01-18 Information contained in this literature was accurate at the time of publication. Product changes may have been made after the copyright date that are not reflected. 2018 Hendrickson USA, L.L.C. All Rights Reserved Printed in United States of America