HOFFMA Fördertechnik GmbH Wurzen
Innovative electric chain hoists Milestones on the way to success 95 954 955 956 The initial LIFTKET design has introduced the change to low headroom hoists by placing the motor and the gearbox on one horizontal level for the first time. The LIFTKET was the first hoist to launch the special patented safety clutch/brake system preventing a load drop if the clutch is damaged or even fully worn. The perfection of the new STAR LIFTKET clutch/brake system does not know anything to compare around the globe today.
Dresdener Straße 67 headquarter, bookkeeping and assembly 966 HOFFMA Fördertechnik GmbH Wurzen Since HOFFMA Fördertechnik GmbH Wurzen has been set up initially on January the st 948 electric hoists have been produced for more than 60 years now. Particularily during the last 0 years the company has been subsequently modernised and expanded. Dresdener Straße 64 sales, design and engineering department Besides the development and the production of standard hoist products taylored to the specific demands of our customers play a central role and are practised part of our company philosophy. LIFTKET hoists are available in over 40 countries worldwide and are daily proving their quality under very different applications and conditions. Our German dealer network and agencies in many countries provide the required service to most of our worldwide customers. Dresdener Straße 66 Machining Dresdener Straße 68 Machining
Three phase electric chain hoists 5 kg 600 kg Basic version... with hook suspension B C A D E J H G G H J J... with electric trolley or push trolley Three phase electric chain hoists 5 kg 600 kg L/L O F M Please note: K G J H Power supply 400 V, ph, 50 Hz Protection class IP55 / insulation class F Different voltage and frequency options available on request Control cable.5 m supplied as standard Height of lift m supplied as standard, the hoist weight has been calculated for m height of lift, hoist weight will increase by approximatly kg if low voltage control is required Different heights of lift and control cable lengths available on request For lifting heights greater than 0 m a reduction to the safe working load must be made for the additional weight of chain STAR models 090/, 09/, 0/ and / have to be fitted with low voltage control only, if supplied without control upon the request a low voltage control has to be added before first operation. These STAR models are equipped with low voltage control as standard. 80 The technical data mentioned in the tables are approximate and subject to change. Counter weights might be required for double speed trolleys for special combinations of load capacity, flange width and type of control (max. weight 9.4 kg). Trolley capacity up to 000 kg up to 00 kg up to 600 kg Minimum radius of beam.0 m.5 m.0 m 4
TAR LIFTKET
) weight including counterweight of 9.4 kg mounted under brake-sided cap 5
Special advantages High duty rate especially for areas with tropical climate Low maintenance requirements with easy access to all wearing parts and almost no need for special tools. This was achieved by introducing the module concept. Motor, oil filled and sealed gearbox, brake and control are ready for operation without any adjustments after being replaced, only the clutch has to be set. A fan cooled hoisting motor with cooling fins following the STAR LIFTKET gearbox contour. Use of first class materials and state of the art technology are to ensure the quality and liability for all the parts. This was accompanied by undergoing a long term test procedure in our laboratories. The proved life cycle of the parts exceeds the FEM requirements for the specific duty groups. An advanced safety for the hoist operation was achieved by implementing a new patented clutch/brake system as an upgrade of the previous idea of the LIFTKET system not to employ a sliding connection between brake and load. All clutch linings are of course asbestosfree. Making conversions from single to double chain fall or vice versa are very easy, safe and fast. Fixing of the second chain fall at the hoist body is absolutely safe and no assembly error can occur. Modern shape and design Compact and durable Aluminium gearbox with low weight 6
J Three phase electric chain hoists 5 kg 000 kg Version 5. Basic version... with hook suspension B C D A E J G H G H J... with electric trolley or push trolley O F L/L M Three phase electric chain hoists 5 kg 000 kg Please note: K G J H Power supply 400 V, ph, 50 Hz Protection class IP54 / Insulation class F Different voltage and frequency options available on request Control cable.5 m supplied as standard Height of lift m supplied as standard, the hoist weight has been calculated for m height of lift, hoist weight will increase by approximatly kg if low voltage control is required Different heights of lift and control cable lengths available on request For lifting heights greater than 0 m a reduction to the safe working load must be made for the additional weight of chain 80 The technical data mentioned in the tables are approximate and subject to change. Counter weights might be required for double speed trolleys for special combinations of load capacity, flange width and type of control (max. weight 9.4 kg). Trolley capacity up to 000 kg up to 00 kg Minimum radius of beam.0 m.5 m 8
LIFTKET
* single fall only 9
LIFTKET electric chain hoists are known for their low headroom design to provide a maximum lifting height, their helical gears with very quiet run made from high quality alloy steel and their low weight due to the very durable aluminium casing. They are available with suspension eye, hook suspension, with push trolleys or electric trolleys. 0
J J J J J J Three phase electric chain hoists 4000 kg 5000 kg Version /00X Basic version... with hook suspension... with electric trolley B C A D E J F O L M Model STAR 5/50 single/double fall, stationary 500kg/5000 kg single fall, one electric trolley 500 kg B C A E E F O M L G G H H G K G H G H G H K
5 tons on two chain falls only Applications for the POWER LIFTKET Single point suspension, the chain leaves the hoist at a single point giving a true vertical lift Suitable for construction industry and heavy maintenance work variable lifting heights are available various suspensions are available The unit can be foot mounted to optimize lifting height OWER LIFT
J J Capacity Version Model Lifting speed umbers of load falls Duty group hoist FEM 9.5 Duty group load chain E -7 Dimension of load chain DI 5684-8 Lifting motor Duty rate starts/hour A B C D E E E G G G G H H H H kg m/min mm kw ED%/S/h mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm Version /00X 4000 4000/-5.6/.4 /00X 5.6/.4 m m 6x45 6/. 60/40/40 564 84 44 500 66 8 995 90 957 8 06 5000 5000/-5.6/.4 /00X 5.6/.4 Am Am 6x45 6/. 60/40/80 564 84 44 500 66 8 995 90 957 8 06 600 600/-5.6/.4 /00X 5.6/.4 Bm Bm 6x45 6.4/.6 60/40/50 564 84 44 500 66 8 995 90 957 8 06 8000 8000/-.8/0.7 /00X.8/0.7 m m 6x45 6/. 60/40/40 564 84 44 500 66 97 089 997 957 8 06 STAR 5/50 8000 8000/-6.4/.6 5/50 6.4/.6 m m.5x66.5/. 5/0/40 69 4 57 4 9 87 48 95 47 6 Version /00X 0000 0000/-.8/0.7 /00X.8/0.7 Am Am 6x45 6/. 60/40/80 564 84 44 500 66 97 089 997 957 8 06 STAR 5/50 0000 0000/-6.4/.6 5/50 6.4/.6 Am Am.5x66.5/. 5/0/80 69 4 57 4 9 87 48 95 47 6 Version /00X 500 500/-.8/0.7 /00X.8/0.7 Bm Bm 6x45 6.4/.6 60/40/50 564 84 44 500 66 97 089 997 957 8 06 STAR 5/50 500 500/-6.4/.6 5/50 6.4/.6 Bm Bm.5x66.5/. 5/0/50 69 4 57 4 9 87 48 95 47 6 6000 6000/-./0.8 5/50./0.8 m m.5x66.5/. 5/0/40 69 4 57 6 455 700 95 6 0000 0000/-./0.8 5/50./0.8 Am Am.5x66.5/. 5/0/80 69 4 57 6 455 700 95 6 5000 5000/-./0.8 5/50./0.8 Bm Bm.5x66.5/. 5/0/50 69 4 57 6 455 700 95 6 single fall, two electric trolleys 500 kg, for conversion to 5000 kg double fall, two electric trolleys 5000 kg F O M L M F O M L M G G H H K K
J mm J mm Trolley type F Flange width Travelling speed Travelling motor K K L L M M O Diameter of the wheels STAR LIFTKET- Basic trolley version mm m/min kw mm mm mm mm mm mm mm mm mm kg kg kg for travelling speed for low voltage control only Weights trolleys 4 5 500 4 4 4 5 5 500 500 S 40-0 0-0 4/6 0./0.55 44 700 56 40 7 50 4 7 74 4 5 5 500 54 54 500 S 40-0 0-0 trolley trolleys trolley trolleys 4/6 0./0.55 48 5 700 59 56 474 40 7 50 554 7 74 5 5 500 S 40-0 0-0 4/6 0./0.55 44 700 56 40 7 50 54 7 74 trolley trolleys trolley trolleys 54 500 S 40-0 0-0 4/6 0./0.55 48 5 700 59 56 474 40 7 50 554 7 74 5 5 500 S 40-0 0-0 4/6 0./0.55 44 700 56 40 7 50 54 7 74 trolley trolleys trolley trolleys 54 500 S 40-0 0-0 4/6 0./0.55 48 5 700 59 56 474 40 7 50 554 7 74 68 500 68 500 S 40-0 0-0 4/6 0./0.55 5 59 56 474 40 7 50 668 74 68 500 Three phase electric chain hoists 4000 kg 5000 kg Version /00X + STAR 5/50 Please note: Power supply 400 V, ph, 50 Hz Version /00X Protection class IP54 STAR 5/50 Protection class IP55 Insulation class F Different voltage and frequency options are available Equipped with 4 V low voltage control as standard limit switches Control cable.5 m supplied as standard Height of lift m supplied as standard, the hoist weight has been calculated for m height of lift Different heights of lift and control cable lengths available on request For lifting heights greater than 0 m a reduction to the safe working load must be made for the additional weight of chain Remark: The standard trolleys of these hoist versions are not suitable for curved runway beams. The technical data mentioned in the tables are approximate and subject to change. 4
chain hoists for special applications The list of options ist quite long. All our hoists are available with either direct or low voltage control; many with encoders, electromechanical load sensors, double brakes and variable speed (frequency controls). These are only a few examples of the special accessories available. LIFTKET electric chain hoists with three phase motors for use at stages and in studios chain hoist with internal planetary gear limit switch and double brake chain hoists for use at stages or in studios incorperate highly specialised solutions and are usually modified for the required application which may vary from customer to customer and from market to market. To list all the possible modifications would exceed the space of this brochure. Would you please send your requirements to receive your detailed offer. A) chain hoists acc. to German standard BGV D8 Capacity from 5 kg up to 500 kg with single fall load chain and different speed variations (please send your requirements) One brake Most models are available for upright and for inverted use as well Available with direct or low voltage control Hoists can be combined with controls of different makes, internal planetary gear limit switches, incremental encoders or low voltage control can be ordered optionally B) chain hoists acc. to German standard VPLT SR.0 D8plus or BGV C Capacity from 5 kg up to 000 kg with single fall load chain and different speed variations (please send your requirements) Double brake Most models are available for upright and for inverted use as well chain hoists acc. to VPLT SR.0 D8plus are available with direct or low voltage control. Hoists acc. to BGV C are to be equipped with low voltage control, special four position internal planetary gear limit switches, mechanical slack chain prevention or electronic underload and overload protection. Incremental encoder can be ordered optionally 6
chain hoist 500 kg certified according to German BGV C standard with worm gear and without electromagnetic load brake, very quiet run Super-short headroom design (in this case based on version B) Hoists with special chain guide, e. g. for use at stages and in studios
Hoists for bigger lifting heights Super-short headroom design based on version B, capacity 0 tons in this case The perfect solution to lift long loads synchronously. The STAR LIFTKET with two load chains is currently available up to x 50 kg, with a hook to hook distance 600 mm 000 mm (standard) or 000 mm 5000 mm (optional). The data sheet is available on request. Remark: Our electric chain hoists are available with culus certificate (for USA and Canada). Some parts and the prices may vary from the EU-Standard versions. STAR LIFTKET single phase electric chain hoists 5 kg 000 kg (detail drawings page 4 6) All the advantages of the standard STAR LIFTKET chain hoists are incorporated in the models with single phase motors, the special safety clutch/brake system and the low headroom. These hoists are designed for construction sites and places without a three phase power supply. Due to the excellent thermal performance of the motor a high duty rate and longer lifting heights are possible. All single phase electric chain hoists require a minimum diameter of.5 sq. mm for the power and control cable for trouble-free operation. The power supply cable should be as short as possible. 7
Chains and hooks made from stainless steel Special pendant to control two hoists Radio control Please note: Power supply 0 V, ph, 50 Hz Protection class IP55 / insulation class F Control cable.5 m supplied as standard Height of lift m supplied as standard, the hoist weight has been calculated for m height of lift Different heights of lift and control cable lengths available on request For lifting heights greater than 0 m a reduction to the safe working load must be made for the additional weight of chain. The technical data mentioned in the tables are approximate and subject to change. 8
Single bolt push and electric trolleys as light crane components LIFTKET push and electric trolleys are robust, durable and all-round applicable light crane components All wheels are equipped with roller bearings and wearresistant surface, the higher capacity wheels being case-hardened Suitable for use on parallel and tapered flanges The electric trolley motor is protected to IP54 All trolleys are equipped with safety drop stop All parts are virtually maintenance free All the electric trolleys are equipped with our robust electromagnetic disk brake All bolts, distance tubes and spacing washers are galvanized for better corrosion protection LIFTKET crane trolleys for underslung cranes allow two options to design the crane: A standard headroom monorail crane and a double girder crane including the foot mounted hoist for improved headroom. 0
Single bolt push trolleys Technical data Type EHF 000 EHFS 000 EHFS 000 EHF 000 EHFS 000 EHFS 000 EHF 00 EHFS 00 EEFS 00 Capacity (kg) Dimension F Dimension Û A Dimension B Dimension G Dimension H Dimension Û J Dimension M Dimension Û T Dimension P Dimension R Weight (kg) 000 66 5 8 6.5 4 7 70 4 09 8 000 7 5 6.5 4 69 70 5 09 9 000 0 00 5 6.5 4 67.5 70 409 09 0 000 66 5 5 6.5 4 87.5 70 68 5 000 7 5 40 6.5 4 85 70 48 5 000 0 00 45 6.5 4 8.5 70 44 5 4 00 8 55 45 8 9 0 5.5 6 56 00 7 5 50 8 90.5 0 5.5 6 90 56 5 00 0 00 55 8 0 5.5 6 48 56 8 Type EHF 5000 EHFS 5000 EHFS 5000 EHF 600 EHFS 600 EHFS 600 Capacity (kg) Dimension F Dimension Û A Dimension B Dimension G Dimension H Dimension Û J Dimension M Dimension Û T Dimension P Dimension R Weight (kg) 5000 90 5 50 4 5 95 9 60 45 70 44 5000 60 6 55 4 5 9.5 9 60 44 70 45 5000 40 00 6 4 5.5 9 60 496 70 49 600 90 5 50 4 5 95 9 60 45 70 44 600 60 6 55 4 5 9.5 9 60 44 70 45 600 40 00 6 4 5.5 9 60 496 70 49
Single bolt electric trolleys Technical data optional control box optional control box optional control box Type EEF 000 EEFS 000 EEFS 000 EEF 000 EEFS 000 EEFS 000 EEF 00 Speed Motor output (m/min) [kw] 6 or 5 [0.] 5+0 [0.04/0.8] 7.5+0 [0.06/0.5] 6 or 5 [0.] 5+0 [0.04/0.8] 7.5+0 [0.06/0.5] 6 or 5 [0.] 5+0 [0.04/0.8] 7.5+0 [0.06/0.5] 6 or 5 [0.] 5+0 [0.04/0.8] 7.5+0 [0.06/0.5] 6 or 5 [0.] 5+0 [0.04/0.8] 7.5+0 [0.06/0.5] 6 or 5 [0.] 5+0 [0.04/0.8] 7.5+0 [0.06/0.5] 5+0 [0.04/0.8] 7.5+0 [0.06/0.5] Capacity Dimension F Dimension Û A Dimension B Dimension Dimension G Dimension H Dimension Û J Dimension K Dimension Û T Dimension Û U Dimension M Dimension P Dimension R Dimension Û S Weight (kg) (kg) 000 66 5 8 6.5 9 64 56 4 7 70 98 0 04 4 09 94 6 40 6 7 0 000 7 5 6.5 9 64 56 4 69 70 98 0 04 5 09 94 6 40 7 8 000 0 00 5 6.5 9 64 56 4 67.5 70 98 0 04 409 09 94 6 40 8 9 000 66 5 5 6.5 9 64 56 4 87.5 70 98 99 04 68 5 94 6 40 8 0 000 7 5 40 6.5 9 64 56 4 85 70 98 99 04 48 5 94 6 40 0 4 000 0 00 45 6.5 9 64 56 4 8.5 70 98 99 04 44 5 94 6 40 5 00 8 55 45 8 56 56 9 0 6 4 5.5 56 40 40 6 5 For narrow girders and low weight of the electric trolley or if used for other applications than a crane trolley a counterweight to compensate the weight of the motor might be necessary. All single bolt electric trolleys are available with a 4 V control (Power supply by a separate transformer is available as an option).
For your underslung crane with capacities up to 600 kg we recommend to use our STAR LIFTKET electric chain hoist. counterweight counterweight 9.4 kg 5.5 kg to be assembled at the side plate without motor underneath the control box EEFS 00 EEFS 00 EEF 5000 EEFS 5000 EEFS 5000 EEF 600 EEFS 600 EEFS 600 5+0 [0.04/0.8] 7.5+0 [0.06/0.5] 5+0 [0.04/0.8] 7.5+0 [0.06/0.5] 4+6 4+6 4+6 4+6 4+6 [0.06/0.5] [0.06/0.5] [0.06/0.5] [0.06/0.5] [0.06/0.5] 4+6 [0.06/0.5] 00 7 5 50 8 56 56 00 0 00 55 8 56 56 5000 90 55 50 4 407 5000 60 6 55 4 407 5000 40 00 6 4 407 600 90 55 50 4 407 600 60 6 55 4 407 600 40 00 6 4 407 90.5 0 0 98 98 5 95 4 5 9.5 4 5.5 4 5 95 4 5 9.5 4 5.5 6 4 5.5 90 56 40 40 6 4 5.5 48 56 40 40 60 60 9 45 70 40 60 60 9 44 70 40 60 60 9 496 70 40 60 60 9 45 70 40 60 60 9 44 70 40 60 60 9 496 70 40 8 7 4 40 6 6 67 6 6 67
Advantages Easy to install, using standard fastener sets A great variety of special parts available including curved rails, turntables, switches, single and double girder crane bridges and fastening equipment Taylor made solutions available Galvanised or black finish available Once the system has been installed it can be upgraded or extended at any time 4
LIFTKET monorail and light crane system The LIFTKET monorail profiles are available made from either S5JR material (standard steel) or.40 material (stainless steel except type 600 and 700). Standard steel profiles are in stock with black surface or galvanised. The max. length of each profile is 6 m. Please note, when planning the system: The max. load per meter of monorail has to be checked, especially for buffer sections of the monorail system. Monorail profile 00 700 * Capacity per meter with a suspension distance m Monorail trolleys for use on the LIFTKET monorail system 5
HOFFMA Fördertechnik GmbH Wurzen Dresdener Straße 64 68 D-04808 Wurzen Germany phone: +49-45-89 4-0 fax: +49-45-89 4-99 e-mail: sales@liftket.de internet: http://www.liftket.de Ho 00/0: Previous editions are no longer valid. Subject to change without notice. Member of MHHW