Contents Description Page Engine Tools Cylinder Head Fitting & Removal 5 Valve Spring & Valve Tools 6-8 Engine Block Tools 8-10 Ignition Tools 11-12 Lubrication System Tools 13-14 Fuel and Exhaust System 15-16 Engine Setting and Locking 17-20 Transmission 21-27 Diagnostics Code Reading - Module Based Systems 24-28 Code Reading - CD Updatable (MAP) Systems 29-31 SMART Vehicle Systems Tester 23-33 Multimeters & Accessories 34-35 Circuit Testers 35-36 Function Testers 36-37 Service Reset Tools 38 Sensor Testers 39 Hand Held 4/5 Gas Analysers 39-41 CO Tester 41 Cylinder Compression 42-45 Oil Pressure 45-46 Fuel Pressure 46-49 Vacuum Testing 49-50 Cooling Systems 51-59 Brake & Suspension Brake Service Tools 60 Brake Pipe Cutting & Bending 61 Brake Pipe Flaring 62-64 Brake Bleeder 64-66 Brake Caliper Tools 66-67 General Brake Service Tools 68-69 Coil Spring Compressors 70-73 Suspension Removal 73-74 Ball Joint Separators 75-76 Suspension Sockets 77-78 Hub Pullers 79 Steering Pullers 80-81 Wheel & Tyre Tools 81 Pullers Triple Leg Hydraulic Pullers 83-84 Twin Leg Hydraulic Pullers 84 Twin / Triple Leg Hydraulic Puller Kits 85 Hydraulic Puller & Separator Kits 86-90 Heavy Duty Hydraulic Pullers 91-92 Triple Leg Mechanical Pullers 93 Twin Leg Mechanical Pullers 94 Fast Fit Mechanical Pullers 95 Twin / Triple Leg Mechanical Puller Kits 96 Internal Extractors - Mechanical 97 Mechanical Puller & Separator Kits 98-99 Blind Housing Bearing Removers 100 Description Page Body Repair Panel Beating - Hammers & Mallets 101-102 Panel Beating - Dollies & Spoons 102-104 Body Repair Kits 104-106 Panel Preparation Tools 107-108 Hole Cutters 109 Sheet Metal Cutting & Folding 110-111 Flanging Tools 112 Welding Clamps 113-114 Door Fitting & Removal Tools 115 Difficult Access Wrenches 116 Trim Fitting and Removal Tools 117 General Workshop Tools Torque Tools 118-119 Extractors & Splitters 120-121 Test Tools 122-123 Miscellaneous Workshop Tools 124-126 Support Products & Services Original Equipment Manufacturing 127 Code Reader Diagnostics Training 129 Electrical and Electronic Diagnostics Training 130 Diesel Systems Training 131 SMART Training 132 Air Bag Diagnostics Training 133 Advanced Electronics Training 134 Solutions-Provider - Suspension 136 Solutions-Provider - Braking 137 Solutions-Provider - Bearing 138 Sptech Workshop 139 Help & Support 140 Technical Data 141 Repairs & Calibration 142 The Wheel 143 SP Workshop Clothing 144 Product Index 146 Alphabetical Index 150 www.sptools.co.uk 1
Introduction Sykes-Pickavant Workshop Catalogue 2005 Welcome to the latest edition of the Sykes-Pickavant Automotive Workshop Catalogue. Continuing 80 years of history, this new catalogue brings you more innovative Workshop Solutions designed to simplify the everyday issues faced by the modern motor mechanic. As part of our efforts to continually improve our products and services, Facom UK Ltd (incorporating Sykes- Pickavant) has a Quality Management System certified by Lloyds Register Quality Assurance to ISO 9001:2000 (certificate LRQ 0920465). Sykes-Pickavant Guarantee: All Sykes-Pickavant products are Guaranteed to perform the task for which they were designed, providing they are used under normal workshop conditions, and subject to fair wear and tear (This is an extract from the full Facom UK Guarantee, a copy of which is supplied with our Trading Terms and Conditions, and is available upon request) 2
Sykes-Pickavant Workshop Catalogue 2005 So you thought all code readers were the same? LET S TALK for a moment about our software pods: Your code reader is only as good as the software that supports it. Under the pod s plastic casing, you ll discover big differences. Produced for specific manufacturers ranges, these talk to the vehicle. Programmed data enables you to diagnose and fix faults. And it s the quality and scope of this that makes all the difference between success and failure. While vehicle management systems become ever more sophisticated, there are immense demands on software to provide good quality interpretations of fault codes. This needs to be presented as practical, user friendly information, not just a string of numbers. We pioneered the hand held code reader market, and keeping our leadership is a matter of pride. So we invest a huge resource three teams of applications engineers are committed to understanding your hands-on requirements, and translating these into action. We build quality inside and out Code readers and systems testers lead a hard life, so we don t trust anyone else to build to our standards. State of the art production equipment and intense quality control procedures ensure long term durability. We even make our own harnesses and leads. Technical support hotline and training We won t leave you stranded our help line on 08702 407439 has the answers to the tricky questions, and our practical training days let you maximise your investment. There s far more to our code readers than meets the eye Advanced Code Reader and Systems Tester Fully featured, the ACR4 handset has a fourline, back-lit display which provides clear text descriptions and comprehensive help screens. It stores up to 100 screens of information in memory. Data can be retrieved at any time during the test. Read and clear fault codes, drive actuators, reset service lights and component values. Optional PC cabling and software enable beforeand-after reports to be printed, to provide proof of work order. Dedicated harnesses, and software pods frequently updated for vehicle-specific applications and EOBD. Call 01922 702200 now for information and literature For performance and productivity Your first choice in automotive service equipment 3
Sykes-Pickavant Workshop Catalogue 2005 Technology. Diagnostics. Evolution. YOUR NEED FOR DATA expands as car electronic systems become more complicated the diagnostics information mountain continues to grow. There are more vehicles with increasingly complex engine management systems for petrol and diesel, plus ABS, airbag, service reset and some limited transmission controls. Soon, you ll be looking at rain activation, seat controls, aircon and more. Until now, it s been a constant challenge to keep your code reading equipment up to date. MAP means information at your fingertips We lead the development of handheld code readers for the independent technician. Until now, you have had to buy a software pod for each application. And, when its information needs updating, replace it with a new one. No longer! The Multi Application Pod system works with our Advanced Code Readers and delivers our ENTIRE applications library along with updates three time a year. This reprogrammable big-memory pod system holds data equivalent to around 17 of our single application pods. MAP comes with three pods one for general applications, plus updatable pods for Ford and for EOBD, which work to different protocols. How MAP works The information comes on a CD, which you upload to the pod via your PC. Just follow the simple on-screen instructions, and the job is done. The purchase price includes two further updates during the first year, then you can subscribe for ongoing updates. The product New user? Buy an ACR4 code reader complete with three 16 pin cables for post 1996/7 vehicles CAN Bus, ISO 9141 and J1850 protocols. With updatable MAP, EOBD and Ford pods. 30364200. Already own a four-line display ACR4, or Smart tester? Upgrade kit 30364600. And if you don t need the scope of MAP, don t worry we continue to release single-vehicle pods. Get the information you need now For full information on the MAP system, visit your Sykes-Pickavant distributor, call 01922 702200, or visit www.sptools.co.uk For performance and productivity Your first choice in automotive service equipment 4
Engine Tools Cylinder Head Tools 01610000 Cylinder Head Bolt Tool TX55 For the removal / installation of cylinder head bolts on Ford OHC & V6 engines 1 /2" sq. drive 01610500 Cylinder Head Bolt Tool TX70 For the removal / installation of cylinder head bolts on Ford 1.8D / 1.8TD engines 1 /2" sq. drive 01613000 Ribe Pattern Long Reach Bit Set For the removal of Ribe pattern 6-point fasteners, as commonly found on Alfa, Fiat, Citroën, Peugeot, VAG 1 /2" sq. drive Set of 6 (7 16mm) Contents 0161300 :- Also available individually Reference Bit Pattern Length-mm Size-mm 01611000 Ribe Long reach 100 7 01611100 Ribe Long reach 100 9 01611200 Ribe Long reach 100 10 01611300 Ribe Long reach 100 12 01611400 Ribe Long reach 100 14 01611500 Ribe Long reach 100 16 01614000 Spline Pattern Long Reach Bit Set For the removal of XZN (spline) pattern, 12-point fasteners 1 /2" sq. drive Set of 5 (M10 M14) Contents 01614000 :- Also available individually 01780000 Cylinder Head Stands Reference Bit Pattern Length-mm Size-mm 01612000 XZN Long reach 100 10 01612100 XZN Extra long reach 120 10 01612200 XZN Long reach 100 12 01612300 XZN Extra long reach 140 12 01612400 XZN Long reach 100 14 Set of 2, high quality steel pillars, to support cylinder heads Essential for working on aluminium heads, inc. OHC Fits stud holes with diameter 9 18mm 5
Engine Tools Valve Spring Compressors 03800000 Valve Spring Compressor Heavy Duty For use on commercial & Off-Road engines Geared hand wheel adjustment Supplied with straight and off-set jaws 03820000 Valve Spring Compressor Ford CVH For use on Ford 1.4 / stud only 1.6 & 1.8 CVH engines 1" hex drive 03950000 Valve Spring Compressor Multivalve For use with multivalve petrol & diesel engines Supplied with 21mm / 25mm / 30mm & restricted access valve spring adaptors 66043000 Valve Spring Compressor OHC Designed for use on OHC petrol & diesel engines. Will also fit a wide variety of smaller OHV engines Specifications:- Reference Jaw Opening (min-mm ) Jaw Opening (max -mm) Clearance 03800000 off-set jaw 75 165 245 03800000 straight jaw 95 186 245 03950000 35 142 150 66043000 63 129 158 6
Engine Tools Valve Spring Compressors 03990000 Valvemaster Service Centre Valve spring compressing system, allows valve spring and stem seal work, without the need to remove the cylinder head Universal mounting brackets for use on a wide variety of OHC & OHV petrol & diesel engines Multi-position lever arm and height adjustment Contents 03990000:- Reference Description Adjustable Support Pillars (2) & Beam 03960800 Lever Arm 03965000 Air Holding Adaptor 039501 /502 /504 /505 Valve Spring Adaptors (4) 03970000 Valve Stem Seal Pliers 03980000 Valve Stem Seal Installer Kit 67000600 Telescopic Magnetic Pick-Up Tool Supplied on storage panel c/w vinyl overlay & hook / clip set Valve Tools 03910000 Valve Collet Installer Set Install collets without the need for using a valve spring compressor Set of 2 less than 5mm diameter & greater than 5mm diameter Contents 03910000:- Reference Application 03920000 5mm and above - cars 03930000 5mm or less - motorcycles 03965000 Valve Air Holding Adaptor Air cylinder pressure holds the valve in place, whilst the spring is removed Long reach adaptor for 14 / 18mm spark plug ports c/w airline adaptor 03970000 Valve Stem Seal Pliers Long reach, specially shaped tips, for improved grip on valve stem seals Suitable for 7mm diameter and upwards 7
Engine Tools Valve Tools 03980000 Valve Stem Seal Installer Kit Set of drive collets and pilots, for accurately installing new valve stem seals, without risk of damage to the seal or spring 660 Series Valve Grinding Sticks For grinding and lapping valves Wooden handled, with rubber suction cups Specifications:- Reference Length-mm Cup Diameter 66090200 224 32mm single-ended 66090300 224 22mm single-ended 66090400 224 19mm single-ended 66090500 224 19 x 22mm double-ended Engine Block Tools 02800000 Cylinder Hone Set (13 89mm) Honing and deglazing set, for 13 89mm diameter cylinders Flexible shaft, for use with air or electric drills C/w set of medium grade 220 grit stones Additional stone sets available:- Reference Grade Grit 02800100 Fine 400 02800200 Medium 220 02800300 Coarse 100 Each Stone Set consists of:- 3 x 19mm stones / 3 x 29mm stones / 3 x 50mm stones, and 9 sets of spring clips 8
Engine Tools Engine Block Tools 02810000 Cylinder Hone (50 180mm) Large diameter honing and deglazing tool Flexible shaft, for use with air or electric drills C/w set of medium grade 220 grit stones Additional stone sets available:- Reference Grade Grit 02810100 Fine 400 02810200 Medium 220 02810300 Coarse 100 Each Stone Set consists of:- 3 x 100mm stones and replacement cotter pins 66037000 Piston Ring Compressor Ratchet action, medium capacity, standard reach For cars and light commercial vehicles Complete with square drive key 66037300 Piston Ring Compressor Ratchet action, large capacity, standard reach For commercial vehicles, industrial and agricultural engines Complete with square drive key 03220000 Piston Ring Compressor Ratchet action, large capacity, long reach For large commercial vehicles, industrial and agricultural engines Complete with square drive key Specifications:- Reference Depth-mm Capacity-mm 66037000 80 57 125 66037300 80 90 175 03220000 165 90 175 9
Engine Tools Engine Block Tools 08375000 Engine Support Beam Triple Arm Fully adjustable support beam, with clip-on third arm Essential for working on modern engines with two lifting points Ideal for one-man operation where additional support is required Safe Working Load 500kg 03110000 Viscous Fan Hub Spanner 32mm For removing thermo viscous fan hubs 32mm applications Ford / BMW 03120000 Viscous Fan Hub Spanner 36mm For removing thermo viscous fan hubs 36mm applications Ford / GM 03130000 Cam Belt Tensioning Adjuster 41mm For tightening cam belts Made from strong alloy steel and chrome plated 41mm applications GM 03140000 Cam Belt Tensioning Adjuster 46mm For tightening cam belts Made from strong alloy steel and chrome plated 46mm applications GM 66077300 Hose Clamp Driver Set (3) Single hex drivers, for tightening and releasing hose clamp fasteners Ergonomic Megatorque screwdriver handle Contents 66077300:- Also available individually Reference Hex Drive Size 66076900 6mm hex 66077000 7mm hex 66077100 8mm hex 10
Engine Tools Ignition Tools Spark Plug Sockets A range of 4 different styles of Spark Plug Socket, to provide the widest possible choice, to suit all applications Specially designed to avoid misalignment between spark plug and socket, thereby eliminating potential damage to spark plug insulator Conforms to ISO11168 Standard Depth Spark Plug Sockets Reference Square Drive & Depth Spark Plug Hex 03340200 3 /8" sq.dr. 90mm 16mm hex 03340400 3 /8" sq.dr. 90mm 18mm hex 03340600 3 /8" sq.dr. 90mm 19mm hex 03340800 3 /8" sq.dr. 90mm 21mm hex 03341000 3 /8" sq.dr. 90mm 14mm bi-hex Extra Long Spark Plug Sockets Reference Square Drive & Depth Spark Plug He 03341200 3 /8" sq.dr. 250mm 16mm hex 03341400 3 /8" sq.dr. 250mm 21mm hex 03341600 3 /8" sq.dr. 250mm 14mm bi-hex Magnetic Spark Plug Sockets Standard Depth Reference Square Drive & Depth Spark Plug Hex 03342200 3 /8" sq.dr. 84mm 16mm hex 03342400 3 /8" sq.dr. 84mm 18mm hex 03342600 3 /8" sq.dr. 84mm 21mm hex Long Handled, Hinged Spark Plug Sockets Reference Square Drive & Length Spark Plug Hex 03345200 3 /8" sq. dr. 385mm 16mm hex 03345600 3 /8" sq. dr. 385mm 21mm hex Spark Plug Torque Handles Pre-Set torque wrenches, designed to minimise the risk of overtightening spark plugs, thereby causing damage to both the plug and cylinder head. Particularly useful for aluminium cylinder heads Specifications:- Reference Sq. Dr. & Length Torque Spark Plug Tapered Thread Spark Plug Straight Thread Glow Plug Tapered Thread 03340100 3 /8" sq.dr.- 260mm 24 Nm M18 21mm M12 14mm M14 M14 21mm 03340300 3 /8" sq.dr.- 260mm 18 Nm M14 16mm M12 16mm M12 11
Engine Tools Ignition Tools Glow Plug Wrenches for Diesel Engines Universal hinged socket wrenches for removal & installation of diesel glow plugs Conforms to ISO11168 Reference Square Drive & Length Plug Hex 66066100 3 /8" sq.dr. 161mm 10mm hex 66066200 3 /8" sq.dr. 155mm 12mm hex Thread Chasers / Thread Cleaners Cleans and reforms female threads in cylinder heads, and sensor sockets Specifications:- Specifications:- Reference Style Diameter 01410000 Double-ended 14 & 18mm 01440000 Double-ended 10 & 12mm 01410500 Single-ended M18 x 1.5 01410600 Single-ended M12 x 1.25 01620000 Pro Feeler Gauges 38 blades straight Thickness range 0.038mm 0.889mm Inc. brass blades for electronic ignition 0.203mm / 0.254mm / 0.305mm 01640000 Pro Feeler Gauges 26 blades cranked Thickness range 0.005mm 0.762mm 45 angle off-set allows for use where access is restricted 12
Engine Tools Lubrication System 01550000 Heavy Duty Strap Wrench Multipurpose, heavy duty strap wrench, ideal for CV oil filter removal Capacity - up to 275mm diameter Replacement strap available (01551200) 03810000 Adjustable Oil Filter Remover Spider-type wrench, c/w geared legs which automatically tighten as the force is applied Capacity 62 to 93mm diameter 3 /8" sq. dr or 19mm hex driver and 1 /2" drive 03830000 Band Type Oil Filter Remover (Large CV / Plant) Band type, adjustable, non-stretch steel band with screw mechanism Capacity 110 to 155mm diameter Replacement band available (03830100) 03840000 Band Type Oil Filter Remover (Standard Car / LCV) Band type, adjustable, non-stretch steel band with screw mechanism Capacity 65 to 100mm diameter Replacement band available (03840100) 03859000 Notch Cap Oil Filter Wrenches Set of 4 For the safe removal of Oil Filters with a notched cap design Common applications: Citroën, Peugeot, Renault, Honda, Rover 3 /8" sq. drive Specifications:- Reference Filter Type Filter Diameter-mm Notch Design 03852000 Purflux notched 66 6 notch 03852100 Purflux notched 76 6 notch 03852200 Purflux notched 86 9 notch 03852300 Purflux notched 96 9 notch 13
Engine Tools Lubrication System 03860000 Strap Type Oil Filter Remover Multipurpose strap wrench, ideal for car oil filter removal Capacity up to 300mm diameter Double ended 13 /16" hex c/w 3 /8" & 1 /2" sq.dr Replacement strap available (03860500) 03890000 Chain Type Heavy Duty Oil Filter Remover Heavy duty leaf type chain Capacity up to 150mm diameter 1" hex or 1 /2" sq. dr. 66041000 Drain Plug Key Set For removal of square and hex drain and filler plugs on sumps, gearboxes, differentials etc Set of 6 double-ended, square and hex, sump and gearbox keys in a metal storage case 13 /16" AF hex drive Contents 66041000:- Also available individually Reference Dimensions Reference Dimensions 66039100 5 /16" hex x 3 /8" hex 66039400 13mm sq. x 14mm hex 66039200 8mm sq. x 3 /8" sq. 66039500 17mm hex x 1 /2" hex 66039300 11mm sq. x 12mm sq. 66039600 8mm hex x 10mm hex 66041500 Drain Plug Key Set 6 piece socket and bit set for drain plug removal Contents 66041500:- Socket bit adaptor 1 /2" sq. dr. 8 x 10mm square bit 10 x 11mm hex bit 12 x 13mm hex bit 14 x 17mm hex bit 5 /16" x 3 /8" hex bit 14
Engine Tools Fuel and Exhaust System 66066300 Diesel Injection Fuel Pipe Wrench 17mm 3 /8" sq. dr. 12 point restricted access wrench 66066400 Diesel Injection Fuel Pipe Wrench 14mm 3 /8" sq. dr. 12 point restricted access wrench 66066600 Diesel Injection Pump Wrench 13mm Easy access wrench for injection pumps 12 point ring wrench 66066700 Diesel Injection Pipe Wrench 17 mm Special double-ended cranked wrench for easy access 66066800 Diesel Injection Pipe Wrench 14mm Special double-ended cranked wrench for easy access For HDI engines Diesel Injector Sockets Deep, thin wall sockets designed for the safe, easy removal and replacement of diesel injectors on a wide range of European and Asian vehicles Made from high quality chrome vanadium steel Standard hex fitting with 1 /2" sq.dr Specifications:- Reference Type of Socket Hex or Bi-Hex Injector Hex Size-mm 01510200 Deep, thin wall Hex 22 01510500 Deep, thin wall Bi-hex 27 01510100 Open, long reach Bi-hex 21 01510300 Open, long reach Bi-hex 22 01510600 Open, long reach Bi-hex 27 15
Engine Tools Fuel and Exhaust System 08570000 Diesel Injector Puller For use with Lucas and Bosch type clamp-down injectors Slide hammer mechanism c/w M8, M12 & M14 adaptors 01650000 Oxygen (Lambda) Sensor Socket 1 /2" sq.dr. x 22mm slotted deep socket Suitable for both heated and unheated oxygen sensors Lambda Sensor Thread Restorers Used to clean and repair damaged or dirty threads at the lambda (oxygen) sensor fitting Specifications:- Reference Type Diameter 01410500 Single-ended hex M18 x 1.5 01410600 Single-ended hex M12 x 1.25 02180000 Exhaust Pipe Cutter Chain type pipe cutter, ideal for use with exhausts Suitable for aluminium, copper, brass, steel Capacity 28 68mm diameter Replacement chain available (ref. 02180100) 66040000 Exhaust Clamp Removal Plates For safe and quick removal and installation of exhaust retaining clamps on VAG vehicles 66100000 Exhaust Hanger Stretchers (2) For re-fitting of rubber mountings after exhaust replacement Short and long hooks for rubber rings and straps 16
Engine Tools Engine Setting & Locking Tools - Individual Engine Setting & Locking Tools - Individual Specifications:- Reference Tool Application 02200000 Flywheel Locking Tool GM Corsa, Nova, Astra, Vectra Petrol & Diesel 02220000 Twin Cam Locking Tool Rover M16 series 220, 420, 820 16v & Turbo 022300V3 Camshaft Locking Tool Ford 16v Zetec inc TDC timing pin 02240000 Camshaft Locking Tool Rover K series 16v engines Rover & MG 02270000 Camshaft Locking Tool BMW M40 series petrol engines 17
Engine Tools Engine Setting & Locking Tools - Individual Engine Setting & Locking Tools - Individual (Continued) Specifications:- Reference Tool Application 02280000 Camshaft Locking Tool GM Ecotec 16v 1.4 & 1.6 petrol engines 02290000 Camshaft Locking Tool GM Ecotec 16v 1.8 & 2.0 petrol engines 02310000 TDC Indicator GM diesel 1.7d & 1.7td 02326000 Locking & Timing Set Master set of locking & timing pins for Renault & PSA 18
Engine Tools Engine Setting & Locking Tools - Master Sets Engine Setting & Locking Tools - Master Sets Specifications:- Reference Contents Petrol Applications Diesel Applications 07751000 Fiat / Alfa 24 piece set Fiat Brava, Stilo, Tipo, Marea, Ulysse, 1.4, 1.6 m, 1.8, 2.0 engines Alfa 145, 146, 147, 155, 156, 1.4, 1.6, 1.8, 2.0 Fiat Brava Bravo, Stilo, Punto, Tipo, Marea, Tempra, Ducatto, Ulysse, 1.7D, 1.9TD, 2.1TD, 2.4TTD 07752000 Ford 15 piece set Fiesta, Focus, Escort, Mondeo, 1.25, 1.4, 1.6, 1.8, 2.0 1993 2002 Fiesta, Focus, Escort, Mondeo, Galaxy, Transit, 1.8D, 1.8TD, 1.9TDi, 2.5D 07753000 GM 24 piece set Nova, Corsa, Astra, Vectra, Zafira, 1.2, 1.4, 1.6, 1.8, 2.0 up to 2002 Nova, Corsa, Astra, Vectra, Zafira, Frontera, Midi, 1.5D, 1.7TD, 2.0D, 2.2D, 2.4TDi 07754000 Peugeot/Citroën 30 piece set AX, BX, ZX, Saxo, Xsara, Xantia, C5, 1.0, 1.1, 1.4, 1.6, 1.8, 1.9, 2.0 inc 16v + 106, 205, 206, 306, 307, 309, 405, 406, 607, 806 1.4D, 1.7D, 1.8D, 1.9TD, 2.0HDi, 2.2HDi, 2.5TD 19
Engine Tools Engine Setting & Locking Tools - Master Sets Engine Setting & Locking Tools - Master Sets (Continued) Specifications:- Reference Contents Petrol Applications Diesel Applications 07755000 Renault 16 piece set Twingo, Clio, Megane, Laguna, Safrane, Espace, 1.2, 1.4, 1.6, 1.7, 2.0, 2.2, 2.5 8v, 12v, 16v, 20v Clio, Megane, Laguna, Safrane, Trafic, Master, 1.6D, 1.9TD, 2.2TD, 2.5TD, 2.8TD 07756000 VAG 16 piece set Polo, Golf, Bora, Passat, Beetle,1.4, 1.6, 1.8, 2.0 16v + A2, A3, A4, A6, TT + Seat & Skoda models Polo, Golf, Bora, Passat, Transporter, 1.2TDi, 1.4, 1.9, 2.4, 2.5TDi + A2, A3, A4, A6, + Seat & Skoda models 07757000 Diesel Pumps 11 piece set Lucas, CAV, Bosch diesel fuel pumps 07712000 Dial Test Indicator Precision DTI gauge enables fast, accurate timing of rotary diesel injection pumps 20
Engine Tools Engine Setting & Locking Tools - Master Sets 316600V2 Timing Belt Tension Gauge For accurate tensioning of timing belts, minimising the risk of premature failure due to incorrect belt tension Features remote gauge for ease of access, with oil filled piston Gauge scale in Kg. Supplied with calibration strip Transmission 08130300 GM Clutch Retaining Clips (set of 3) For the retention of drive plates while servicing GM clutches 08510100 Flywheel Puller 2 & 3 Way For flywheels with threaded holes, and pitch circle diameter of 42 108mm Contains both Imperial ( 3 /8" UNF) and Metric (M10) threaded pulling rods Ideal for use on Austin / Rover Mini and Metro with Verto flywheel & clutch 66030000 Flywheel Puller 3 way only This model has the same applications as per 08510100, but is a lower specification product, designed for Mini / Metro flywheel pulling only 21
Engine Tools Transmission 08550500 Fifth Gear Puller For removal of the fifth gear on Ford front wheel drive transmissions, prior to carrying out internal transmission repairs 24mm hex drive nut 61574500 Ford MTX75 Gearbox Socket 46mm Special socket for removal and replacement of the first motion shaft cover on Ford MTX75 gearboxes 1 /2" sq. dr. 46mm bi-hex extra long socket 18520000 Gearbox Bush Remover for Land Rover Specially designed tool for the removal of the gearbox bush without risk of damage Can be used on LR vehicles with LT77 gearbox Discovery, Defender, Range Rover, also LDV Freight Rover range Uses hydraulic power from the SP1500 hydraulic puller ram Replacement hydraulic ram available (15000000) 11300000 Bush and Bearing Installer Kit A simple, easy to use tool for the installation of bearings, bushes nylon seals etc. Features a range of nylon adaptors which allow full face support, preventing damage and premature failure Supplied with a dead blow hammer, and bearing cross-reference chart Adaptor Range:- Ø Internal Diameter 10 50mm Ø External Diameter 26 110mm 22
Diagnostics Sykes-Pickavant has been at the forefront of providing diagnostic solutions to the motor mechanic for more than 15 years. After many years of development, the range now encompasses a wide selection of diagnostic products, which have been designed with the independent garage in mind, and which can be separated into five major product categories:- Fault Code Reading & Testing The Advanced Code Reader with 4-line display (ACR4 range) Systems Testing The SMART 4 in 1 Diagnostic Systems Tester Electronic Test Tools A range of individual diagnostic tools & testers Emissions Analysis Hand Held Gas Analysers & accessories Pressure Testing A range of Pressure Gauge test kits to complement the diagnostic process As vehicle technology moves forward at an ever increasing pace, it becomes increasingly difficult for the independent garage and motor mechanic to provide an up to date service for their current and potential customers. Because of this, at Sykes Pickavant, we continue to invest heavily in research and development to keep our customers at the cutting edge of automotive innovation and advancement. We employ our own Electronics Hardware and Software engineers and have an extensive, on going, vehicle applications programme in order to keep our products and our customers up to date. Fault Code Reading and Testing - Advanced Code Reader (ACR4) The ACR4 Advanced Code Reader and Systems Tester has been designed as a value-for-money diagnostic tool for motor mechanics, allowing fast diagnosis and troubleshooting without the need for investment in expensive, specialist equipment. The main features of the ACR4 Fault code reading & clearing Set engine parameters Display component values Drive actuators Service light resetting Built-in help screens Internal memory (100 screens of text) Optional PC printing capability Software Applications Systems coverage Engine Management Petrol & Diesel ABS Airbag / Airbag Reconfiguration (where applicable) Service Reset Security & Immobiliser Gearbox Control Suspension Air Conditioning EOBD Emission Controls Vehicle applications software for the ACR4 can be purchased in two formats:- Individual Vehicle Manufacturer Software Applications Pods Multi-Application Pod (MAP) Updates via CD ROM Similarly, two types of ACR4 packages are available:- ACR4 Individual Pod Kits ACR4 CD ROM Kits (MAP) 23
Diagnostics Fault Code Reading and Testing - Advanced Code Reader (ACR4) ACR4 Individual Pod Kits A series of Starter Kits, using one major vehicle manufacturer, or one system type as a base, which can then be added to whenever necessary, to compliment and enhance your applications coverage. All kits are based around the ACR4 Handset with 4-line back-lit display, and are supplied in a plastic storage case suitable for up to 10 individual pods plus associated harnesses. Each kit also comes with the full support package of training, help line, and technical bulletins Standard Contents for each kit Reference ACR4 Handset 30255400 Cable Extension Lead 30213400 Storage Case (10 pod) 30255500 Support Package with each kit:- ACR Training Course 1 x Place for one person Vehicle Helpline 2 x Hours of pre-paid help Technical Bulletin Service 12 x Months pre-paid subscription 303613V3 ACR4: EOBD Test Kit for Emission Controls All makes EOBD Systems coverage from 2001 onwards Includes vehicles using CAN bus protocols for EOBD Contents 303613V3:- Also available individually Standard Contents for each kit Reference ACR4 Handset, Case, Extension Lead ACR4 Support Package EOBD Software Pod 30352600 EOBD / CAN bus Harness 30214100 ACR Training Course 1 x Place for one person Vehicle Helpline 2 x Hours of pre-paid help Technical Bulletin Service 12 x Months pre-paid subscription 24
Diagnostics Fault Code Reading and Testing - Advanced Code Reader (ACR4) 30361200 ACR4: ABS & Airbag Applications Kit ABS & Airbag Systems coverage for 12 major European manufacturers Includes harnesses for all vehicles covered 1990 2003/4 Contents 30361200:- ACR4 Handset, Case, Extension Lead ACR4 Support Package ABS & Airbag Software Pods:- Peugeot, Citroen, Renault 30350700 Alfa, Fiat, Ford, Lancia 30351000 Audi, Seat, Skoda, Vauxhall, VW 30352200 Set of Vehicle Harnesses (13) for above applications ACR Training Course 1 x Place for one person Vehicle Helpline 2 x Hours of pre-paid help Technical Bulletin Service 12 x Months pre-paid subscription 25
Diagnostics Fault Code Reading and Testing - Advanced Code Reader (ACR4) 30362000 ACR4: Rover Applications Kit Engine Management, ABS, Airbag, Service Reset Rover vehicles 1990 2003/4 Contents 30362000:- ACR4 Handset, Case, Extension Lead ACR4 Support Package Multi-System Software Pod for Rover 30353200 Set of Vehicle Harnesses (2) for above applications ACR Training Course 1 x Place for one person Vehicle Helpline 2 x Hours of pre-paid help Technical Bulletin Service 12 x Months pre-paid subscription 30362100 ACR4: VAG Applications Kit Engine Management, ABS, Airbag, Security, Aircon, Service Reset, Gearbox, and Suspension VAG (Audi, Seat, Skoda, VW) vehicles 1990 2003/4 Contents 30362100:- ACR4 Handset, Case, Extension Lead ACR4 Support Package Multi-System Software Pod for VAG 30353400 Set of Vehicle Harnesses (2) for above applications ACR Training Course 1 x Place for one person Vehicle Helpline 2 x Hours of pre-paid help Technical Bulletin Service 12 x Months pre-paid subscription Remember You can add any additional Application Pods and harnesses, to compliment your kit. 26
Diagnostics Fault Code Reading and Testing - Advanced Code Reader (ACR4) ACR4 Build-you-own Pod Kits Choose any mix of Handset, Application Pods and associated harnesses, and create your own kit! Step 1 - Choose a Handset and storage case Description Reference ACR4 Handset c/w Storage Case for 10 pods 30055400 ACR4 Handset c/w storage Case for 25 pods 30155400 SMART Systems Tester c/w Storage Case 33020100 Step 2 - Choose your Application Pods Description Reference ABS & Airbag Application Pods Ford, Fiat, Alfa, Lancia 30351000 Peugeot, Citroën, Renault 30350700 Vauxhall, Opel, VW, Audi, Seat, Skoda 30352200 Emission Controls EOBD 30352600 Engine Management (Petrol & Diesel) BMW 30352100 Fiat, Alfa, Lancia 30352400 Ford 30352000 Mercedes 30351100 Peugeot, Citroën 30353000 Renault 30352900 Suzuki 30059600 Toyota, Lexus 30057500 Vauxhall, Opel, GM (1) 30351200 Vauxhall, Opel, GM (2) 30351300 Volvo 30351400 Multi-System (EM, ABS, Airbag, Service Reset etc) Rover All Systems 30353200 VW, Audi, Seat, Skoda All Systems 30353400 Step 3 - Choose your Harnesses 27
Diagnostics Fault Code Reading and Testing - Advanced Code Reader (ACR4) Description Reference ABS 16 pin J1962 Harness for Peugeot/Citroen 30213800 ABS 16 pin J1962 Harness for GM/VAG 30214500 BMW 20 pin Harness 302128V2 Fiat Harness 30212600 Ford EEC IV Harness (pre 1997) 30213000 Ford 3 pin / 16 pin Special Adaptor 30213300 Ford 16 pin J1850 Harness (1997 -) 30212900 Mercedes 14 pin Harness 30214700 Mercedes 38 pin Harness 30214400 Peugeot / Citroen Harness (pre-1997) 30211700 Peugeot / Citroen 30 pin Harness 302122V3 Renault Harness (pre 1997) 30212100 Renault 16 pin J1962 Harness (1997 -) 30212700 Rover Harness (pre 1997) 30211600 Rover 16 pin J1962 Harness (1997 -) 30214000 Standard 16 pin J962 Harness (1997 -) for GM / VAG / PSA 30212400 Suzuki Harness 30212500 Toyota Harness 30211900 Universal CAN bus 16 pin Harness for EOBD 30214100 Universal ISO9141 16 pin Harness All makes 30214600 Vauxhall Harness 30211500 Vauxhall Harness (Special) 30211800 Volvo Harness (pre 1997) 30212000 Volvo J1962 16 pin Harness (1997 -) 30214200 VAG Harness (pre 1997) 30212300 Step 4 - Choose your accessories Description Reference ACR4 / PC Software Kit ACR4PCV1 ACR4 / PC Link Cable 30213500 ACR4 Spare Handset 30255400 ACR4 Spare Extension Lead 30213400 ACR4 Empty Storage Case (10 pod) 30255500 ACR4 Empty Storage Case (25 pod) 30255600 28
Diagnostics Fault Code Reading and Testing - Advanced Code Reader (ACR4) ACR4 CD ROM Kits (MAP) MAP CD ROM Updating for ACR4 A new method of receiving application software updates by CD ROM Faster and more frequent than individual application pods Subscription based receive your updates through the post Each CD ROM contains the full range of applications software we produce, and is equivalent to all of the individual application pods combined. By joining the subscription programme you receive three updates per year, each containing the very latest software updates across the full range of applications we cover. You will require a PC with CD ROM drive, in order to download the software into the MAP (Multi Application Pod) which is reprogrammable, and will require you to register with us in order to receive your personal access code and your future updates. There are five basic kits available:- Kit Reference Description ACR4 CD Kit (Existing users) 30364600 For users who already own an ACR4 handset, plus a selection of pods and harnesses ACR4 CD Kit (Existing Users Plus Support) 30364700 For users who already own an ACR4 handset, plus a selection of pods and harnesses includes full technical support ACR4 CD Kit (New Users) 30364200 For users who have no existing ACR4 products, or for those who require a new ACR4 package ACR4 CD Kit (New Users Plus Support) 30364300 For users who have no existing ACR4 products, or for those who require a new ACR4 package includes full technical support SMART CD Kit (New Users - Plus Support) 30364400 For new users or ACR users requiring and upgrade to the SMART vehicle systems tester includes full technical support Kit Contents:- Kit 30364600 ACR4 CD Kit (Existing Users) Kit 30364700 ACR4 CD Kit (Existing Users- Plus Support) Contents MAP Multi-Application Pod ACR4 / PC Software Kit Vehicle Applications Software (CD) Annual Subscription for One Year (3 updates) Contents MAP Multi-Application Pod ACR4 / PC Software Kit Vehicle Applications Software (CD) Annual Subscription for One Year (3 updates) Vehicle Helpline (2 x Hours of pre-paid help) Technical Bulletin Subscription (12 months) SPTech Workshop Subscription (12 months) 1 day training, 1 person @ Cannock 29
Diagnostics Fault Code Reading and Testing - Advanced Code Reader (ACR4) Kit Contents:- Kit 30364200 ACR4 CD Kit (New Users) Kit 30364300 ACR4 CD Kit (New Users - Plus Support) Kit 30364400 SMART CD Kit (New Users - Plus Support) Contents ACR4 Handset, Case, Extension Lead MAP Multi-Application Pod EOBD Application Pod Ford Application Pod ACR4 / PC Software Kit Universal ISO9141 16 pin Harness All makes Universal CAN bus 16 pin Harness for EOBD Ford 16 pin J1850 Harness (1997 -) Vehicle Applications Software (CD) Annual Subscription for One Year (3 updates) ACR4 Handset, Case, Extension Lead Contents MAP Multi-Application Pod EOBD Application Pod Ford Application Pod ACR4 / PC Software Kit Universal ISO9141 16 pin Harness All makes Universal CAN bus 16 pin Harness for EOBD Ford 16 pin J1850 Harness (1997 -) Vehicle Applications Software (CD) Annual Subscription for One Year (3 updates) Vehicle Helpline (2 x Hours of pre-paid help) Technical Bulletin Subscription (12 months) SPTech Workshop Subscription (12 months) 1 day training, 1 person @ Cannock Contents SMART Diagnostic System Tester MAP Multi-Application Pod EOBD Application Pod Ford Application Pod SMART / PC Software Kit Universal ISO9141 16 pin Harness All makes Universal CAN bus 16 pin Harness for EOBD Ford 16 pin J1850 Harness (1997 -) Vehicle Applications Software (CD) Annual Subscription for One Year (3 updates) SMART One Day Training Course Vehicle Helpline (2 x Hours of pre-paid help) Technical Bulletin Subscription (12 months) SPTech Workshop Subscription (12 months) NB. It is currently necessary to supply separate application pods for EOBD / Ford, due to the unique nature of the software protocols used. However, both of these applications are reprogrammable and can be updated from the CD using exactly the same process. 30
Diagnostics Fault Code Reading and Testing - Advanced Code Reader (ACR4) 303648V2 Manufacturers Specific Harness Kit For New Users, who wish to have full coverage of all vehicle application software on the CD, we have created this special package of Harnesses for pre-1997 vehicles Contains 16 manufacturer specific harnesses, in a plastic storage case Please refer to the published ACR Systems Tester Applications book, for full details regarding specific applications. MAP CD ROM Software Applications Coverage As our software engineers develop applications software on a continuous basis, it is now possible to update our applications database with individual models and systems almost daily! The result is that it is no longer necessary to wait 12 18 months for updates (as with pods) Each CD update may now include individual models from a range, or even individual system applications. The following table lists the range of Vehicle Applications and Systems Coverage currently available, though remember that this list is being added to almost every day! Applications limited to specified models: see published Applications Listings:- Make EOBD [all makes] Emission Controls EOBD V2 9 modes Engine Management Service Settings & Reset ABS Airbag Airbag Gearbox Suspension Immobiliser Configuration Air Conditioning Alfa Romeo Yes Yes Yes Yes Audi Yes Yes Yes Yes Yes Yes Yes Yes Yes BMW Yes Yes Yes Yes Yes Citroën Yes Yes Yes Yes Yes Yes Ford Yes Ford V3 Ford V3 Yes Yes Yes Yes Fiat Yes Yes Yes Yes GM Yes Yes Yes Yes Yes Lancia Yes Yes Yes Yes Land Rover Yes Yes Mercedes Yes Yes Peugeot Yes Yes Yes Yes Yes Yes Yes Yes Renault Yes Yes Yes Yes Yes Yes Yes Yes Rover/MG Yes Yes Yes Yes Yes Seat Yes Yes Yes Yes Yes Yes Yes Yes Yes Skoda Yes Yes Yes Yes Yes Yes Yes Yes Yes Suzuki Yes Yes Toyota Yes Yes Yes Yes VW Yes Yes Yes Yes Yes Yes Yes Yes Yes Volvo Yes Yes Yes For further information regarding the ACR4 Advanced Code Reader and Systems Tester programme log on to www.sptools.co.uk 31
Diagnostics System Testing - SMART Vehicle Systems Tester The SMART is a unique 4-in-1 Diagnostic Systems Tester, which has the following primary functions, all of which can be run simultaneously, without the need for disconnecting and reconnecting to the vehicle when switching between functions:- Multiple Channel Scope Code Reading and Serial Data Analysis from the ECM Signal Simulation Digital Multimeter (DMM) giving multiple value digital measurements SMART functions and features:- SMART functions Scope 4 screens available:- 2 x labscope 2 x ignition SMART features Colour LCD screen, back-lit display Touch screen technology with multi-screen layout Code Reading Uses ACR4 Application Pods & Harnesses Menu driven, with both beginners and expert modes (pre-set or user defined screens) Signal Simulation Generates signals to the ECM Multi-tasking capability Isolates faulty sensors & harnesses Internal Help Screens Built-in PC connections for both input and output Digital Multimeter Digital Display of:- Volts, amps, ohms Temperature Upgradeable via Web and/or PC Support:- E-mail and Web technical support Telephone helpline Training SMART is delivered with all major harnesses, pick-ups, probes and cables (refer to contents list) and is supplied in a strong protective carry case. NB. ACR Application Pods and Harnesses are not included with the SMART and should be ordered individually, as required. PRODUCT REVIEW We can t really hesitate to recommend the Sykes-Pickavant SMART as a versatile, state-of-the-art Multi function diagnostic tester. It s convenient to use, easy to operate and accurate in the results it achieves... Even inexperienced users should find it easy and quick to get started with some meaningful diagnostics... Car Mechanics Magazine; April, 2004 32
Diagnostics System Testing - SMART Vehicle Systems Tester 33020100 SMART 4 in 1 Diagnostic Systems Tester: Main Kit SMART Kit Contents:- Smart kit contents: 33020100 SMART unit 1 33010000 12 V dc Battery power cable (Red plug) 1 33011100 Mains adaptor/charger (Red plug) 1 33011200 Sensor simulator cable (Green plug) 1 33011000 Low Tension cable (Grey plug) 1 33010700 High Tension clips and cable (Yellow plug) 1 33010500 Cylinder 1 clamp and cable (Yellow plug) 1 33010400 Labscope lead (BNC to 4 mm plug) channel A & B 2 33010200 K-Type temperature thermocouple 1 30089200 Current clamp 1 30064500 SMART to PC software 1 33030000 SMART to PC link cable 1 33012100 2 way mini-bob x 1 Standard shrouded 1 30080000 3 way mini-bob x 1 4 way mini-bob x 1 5 way mini-bob x 1 2 way mini-bob x 1 Modified non-shrouded 1 30082000 3 way mini-bob x 1 4 way mini-bob x 1 5 way mini-bob x 1 Case with insert 1 33011900 Accessories case containing assortment of probes/cables 33010100 DMM leads (pair) 33012500 4mm patch lead red 2M 33012600 4mm patch lead black 2M 33012700 Croc clip red x2 33012800 Croc clip black x2 33012900 Insulation piercing probe black 33013000 Insulation piercing probe red 33013100 Hook probe red 33013200 Hook probe black 33013300 Accessory box (empty) 1 33012300 33
Diagnostics Electronic Test Tools - Multimeters and Accessories 30050000 Automotive Digital Multimeter Volts (AC & DC), Amps, Ohms, Dwell, RPM Data hold facility for freezing of readings Internal battery life indicator Supplied with test leads, croc clips and instructions Picture for illustrative purposes only. Product / Specification change due 2005. 30050200 Test Lead & Probe Set Optional accessory for use with most standard multimeters (4mm plugs) Selection of probes and clips 30050300 Cables Probes Insulation Piercing Set of 2 probes for cable piercing Protected tip to avoid shorting 4mm socket connection for standard multimeter cables 30064500 Amps Clamp 600 amp An AC / DC Current clamp for use with standard multimeters +/- 600 amp range covers most Automotive applications On / off switch and internal battery life indicator 34
Diagnostics Electronic Test Tools - Multimeters and Accessories 30080000 Interface Lead Set Set of 4 in-line connectors with standard harness fittings T-type connections allow non-interrupted testing of sensor signals 4 mm sockets for standard multimeter cables 2, 3, 4 & 5 pin configuration 30306000 Break Out Box Kit 60 pin break-out box c/w 4 adaptors T-type connections for ECM signal testing 15, 25, 35 & 55 way harness adaptors Electronic Test Tools - Circuit Testers 01490000 Professional Circuit Tester 6 12 24 volts Robust handle with hardened steel probe 1.5m heavy duty insulated rubber lead Uses standard automotive bulb to indicate continuity 01490200 Circuit Tester Buzzer 3 28 volts For use on negative earth circuits Three way voltage signal LED, buzzer, vibration Low current draw ensures the tester can safely test micro-electronic circuits 35
Diagnostics Electronic Test Tools - Circuit Testers 01495000 Glow Plug Circuit Tester Indicates Glow Plug condition Short-circuit, open circuit, low power Uses power from vehicle battery (12v) Low battery power indicator 30070100 HT Tester Set Set of 4 neon testers for quick connection between spark plugs and HT leads Provides a visual check for detecting HT signal Electronic Test Tools - Function Testers 30069400 Remote Key Fob Tester Checks remote key fobs for correct functioning Tests output signal from key fob, on both Infra-Red and 418/433 MHz frequencies 30307000 Diesel Timing Adaptor Measures engine speed (0 6000RPM) Check and adjust dynamic timing Features unique Trigger Stabilisation System to ensure stability of readings Supplied with 6mm piezo electronic transducer (other sizes also available) 36
Diagnostics Electronic Test Tools - Function Testers 30070500 Memory Saver 12v / 24v Saves vehicle computer configuration and data when power supply is interrupted Protects circuits from voltage surges Operates from 12v or 24v external batteries 34031200 Electronic Thermometer For testing temperature range and efficiency of air-conditioning systems Monitors maximum and minimum values Range 0 50 C (0.1 C resolution) Features a count-down timer and audible alarm 30071100 Throttle Pot Tester Allows a quick check of the quality of electrical signal created by the throttle potentiometer in a petrol engine management system For use on vehicles with poor or erratic acceleration and vehicles with poor fuel consumption Runs from the vehicles own power supply 30071000 Petrol Injector Tester Allows a quick check of the quality of electrical signal arriving at each injector in a petrol engine management system For use on vehicles with poor hot or cold starting, vehicles with poor fuel consumption, vehicles which fail to start but the engine still cranks and vehicles that start but stall soon after Runs from the vehicles own power supply 37
Diagnostics Electronic Test Tools - Service Reset Tools 300691V4 Service Reset Tool for VAG Resets service interval and oil lights on VAG vehicles Recently upgraded to cover latest applications Fitted with VAG twin-connection cable and plug 30069200 Service Reset Tool for Volvo Resets service interval lights on Volvo vehicles Recently upgraded to cover latest applications Fitted with Volvo connection cable and plug 300693V2 Service Reset Tool for BMW Resets service interval and oil lights on BMW vehicles (1989 -) Recently upgraded to cover latest applications Fitted with BMW twin-connection cable and plug 38
Diagnostics Electronic Test Tools - Sensor Testers 30073000 Lambda Sensor Tester Checks the operation of the Lambda switch, in-situ Can be used in conjunction with an EGA to check air / fuel ratios. 300735V2 Professional Sensor Simulator & Tester Simulates sensor signals, and measures signal output continuously Eliminates guesswork where faulty components are suspected Generates voltages, frequencies, resistance Menu operated, with single, multi-function button PRODUCT REVIEW...an excellent tool....i found this tool to be of excellent use in the increasing world of motor vehicle electronics. Practical Mechanics Magazine; June 2004 Emissions Analysis - Hand Held Exhaust Gas Analyser Range A range of truly portable 4 & 5 Gas Analysers for fault diagnosis, tuning, and pre-mot testing Features Common to all models:- Easy to use no need for daily reconfiguration Light weight only 1.1kg truly hand-held Fast warm-up only 150 seconds Internal memory stores up to 250 test results manual or automatic mode PC compatible (using optional software) Long life internal battery full 8 hours between recharges (via mains or 12v) Multi-lingual English, French, German, Italian, Spanish as standard 39
Diagnostics Emissions Analysis - Hand Held Exhaust Gas Analyser Range Model Selection Table:- OIML Class 1 Models Standard Models Reference 32424200 32424000 32423200 32420000 Description 5 Gas Analyser 4 Gas Analyser 5 Gas Analyser 4 Gas Analyser Gases Measured CO/CO2/O2/HC/NOX CO/CO2/O2/HC CO/CO2/O2/HC/NOX CO/CO2/O2/HC OIML Class 1 Certificate Yes Yes Class 1 Accuracy Class 1 Accuracy Corrected CO Yes Yes Yes Yes Measures RPM 2 / 4 Stroke, DIS Yes Yes Measures Oil Temperature Yes Yes Fuel Types : Petrol / LPG / CNG Yes Yes Yes Yes Exhaust Probe Standard Yes Yes Exhaust Probe Stainless Steel Yes Yes Carrying Case Yes Yes Yes Yes For full Technical Specification, ask for a copy of the Sykes-Pickavant Hand Held Gas Analysers leaflet. Hand held Gas Analyser Accessories:- 32425000 Infra-Red Printer Compatible with the full range of Hand Held Gas Analysers The Gas Analyser sends results via an integral IR transmitter to the remote printer 32425500 Professional Carrying Case Heavy duty carrying case which will also accommodate the IR printer, PC kit etc. 32427000 High Temp Exhaust Probe Stainless Steel (standard with 5 Gas models) For use during extended tests, or with high temperature exhausts 40
Diagnostics Emissions Analysis - Hand Held Exhaust Gas Analyser Range 32428000 RPM Clamp (standard with OIML class 1 models) For direct RPM measurement For use with SP hand held gas analyser 32429000 Oil Temperature Probe (standard with OIML class 1 models) For direct Oil Temperature measurement For use with SP hand held gas analyser 32430000 PC Software Kit for Hand Held Gas Analyser Range Links Gas Analyser to a PC to allow:- Display of results on PC screen Printing of results on PC printer Download of results to PC for storage Emissions Analysis - Digital CO Meter 30074500 Digital CO Meter Low cost CO measurement, by internal catalytic conversion Internal filter system and water separator Displays % content of CO Supplied with hose (7.5m), probe, clamp, power leads (12v) and spare filters 41
Diagnostics Cylinder Leakage Testing 31380000 Cylinder Leakage Tester An alternative to conventional compression testers, which provides a direct indication of the location of the leak, by measuring the rate of loss of compression, between cylinders Helps to diagnose worn and broken pistons or rings, burnt and leaking valves and faulty head gaskets Supplied with a wide variety of adaptors to fit the majority of petrol & diesel engines, on cars, LCV s, motorcycles, marine engines etc. Contents 31380000:- Component Qty Glowplug Adaptors 5 Dummy Injectors 4 Spark Plug Port extensions 5 Test Unit c/w airline connections 1 Hose Assembly 2m 1 Test Reports Pad 1 x 50 Can be used with any additional adaptors from the Sykes-Pickavant Compression Testing range petrol or diesel Cylinder Compression Testing Cylinder Compression Testing Oil Pressure Testing Fuel Pressure Testing Vacuum Testing Cooling System Pressure Testing 31400000 Petrol Engine Compression Tester Shock protected dual scale gauge, for quick and accurate checks Pressure relief valve allows repeated tests, without removing the gauge Specification:- 300mm rubber hose M14 / M18 dual thread coupling Gauge scale 0 20bar, 0 3000psi. 42
Diagnostics Cylinder Compression Testing 31402000 Petrol Engine Compression Tester Extra Long Hose Similar to 31400000 Petrol Compression Tester Fitted with 460mm rubber hose for restricted access plug ports 31400300 Petrol Engine Compression Tester Kit Comprehensive kit based on the 31400000 Compression Tester Contents 31400300:- Component Qty Petrol Compression Tester 31400000 1 Spark Plug Port extensions M10, M12, M14, 5 M16, M18 Thread Chaser M14 / M18 1 Thread Chaser M10 / M12 1 Service Kit of non-return valves and O-rings 1 31400900 Petrol Engine Compression Tester Long Reach Adaptor for Ford Zetec / Duratec Special M14 adaptor for access to Ford Zetec & Duratec plug ports 31420000 Diesel Engine Compression Tester Car Kit Comprehensive test kit for both direct and indirect diesel injected engines Checks engine compression under cranking conditions Enables cylinder access through dummy injector and glow plug adaptors Specification:- 560mm Rubber Hose Gauge Scale 0 60bar, 0 860psi Contents 31420000:- Component Qty Diesel Compression Tester 31420100 1 Glowplug Adaptors 5 Dummy Injectors 4 Service Kit of seals and washers 1 43
Diagnostics Cylinder Compression Testing 31429500 Diesel Engine Compression Tester Master Kit for Cars / LCV s Master Kit based on the 31420000 Diesel Compression Tester Kit Contains additional glowplug adaptors and dummy injectors, for Mercedes, VW / Audi, Land Rover and PSA applications Contents 31429500:- Component Qty Diesel Compression Tester 31420100 1 Glowplug Adaptors 9 Dummy Injectors 10 Service Kit of seals and washers 1 Converter for use with Motometer testers 1 31427000 Diesel Engine Compression Tester Upgrade Kit (1) Upgrades owners of kit 31420000 to 31429500 Contains all additional adaptors, within foam lid insert 31420500 Diesel Engine Compression Tester Upgrade Kit (2) HGV An Injector Mandrel Set to upgrade 31420000 or 31429500, for HGV Extends applications coverage to commercial vehicles 31430000 Diesel Engine Compression Tester HGV Kit Comprehensive kit for checking compression on both direct and indirect diesel injected engines commercial, marine, industrial Uses Injector Mandrel Set (31420500) in conjunction with Diesel Compression Gauge (31420100) 44
Diagnostics Cylinder Compression Testing 314395V2 Diesel Engine Compression Universal HGV Master Kit Master Kit covering the majority of commercial, industrial, marine and agricultural applications A universal mandrel system allows the user to duplicate a wide variety of injectors A selection of common dummy injectors are also included Contents 314395V2:- Component Qty Diesel Compression Tester 31420100 1 Dummy Injectors 7 Centre Pillars, Pilot Pins, Clamping Plates, 3 each Collars & Shoulder Nuts Spacers, End Adaptors 6 each Special Application adaptors 2 Service Kit of seals and washers 1 Kit supplied with comprehensive vehicle applications information book Oil Pressure Testing 31470000 Oil Pressure Test Set Helps to diagnose worn oil pumps and engines, faulty oil pressure switches and pressure warning indicators Shock protected dual scale gauge, for quick and accurate checks Permanently primed long flexible hose, for easy access Specification:- 1m flexible oil primed hose Gauge Scale 0 10bar, 0 150psi Contents 31470000:- Component Qty Oil Pressure Test Gauge c/w 1m hose 1 (31470100) Oil Switch Port Adaptors 10 Elbow 90 1 31470200 Oil Pressure Test Gauge Long Hose Specification as for 31470100 but supplied with 2m flexible oil primed hose For increased accessibility 45
Diagnostics Oil Pressure Testing 31475000 Auto Gearbox Oil Pressure Tester A dual gauge, high pressure tester, for assisting in the diagnosis of autogearbox and engine faults on vehicles with automatic transmission Dual gauges allow for both high and low pressure testing Specification:- 2m flexible oil primed hose Gauge scales:- Low pressure 0 20bar, 0 300psi High pressure 0 40bar, 0 600psi Contents 31475000:- Component Qty Low Pressure Gauge Assembly (31475100) 1 High Pressure Gauge Assembly (31475200) 1 2m Oil Primed Hose Assembly 1 Oil Switch Port Adaptors 10 Elbow 90 1 Service kit of washers 1 Fuel Pressure Testing 314800V2 Fuel Injection Pressure Testing Kit for Multi-Point Systems A universal kit which covers a wide range of both mechanical and electronic multi-point fuel injection systems Shock protected dual scale gauge, fuel resistant Relief valve for safe depressurisation Fits the self-test point on modern Ford and GM vehicles Quick coupling adaptors and hose connections Specification:- 450mm rubber fuel hose, with additional hose extensions Gauge scale 0 10bar, 0 145psi. Gauge diameter 100mm Contents 314800V2:- Component Qty Multi-Point Fuel Pressure Gauge Assembly 31487100 1 Rubber Fuel Hose Extensions 5 Fuel Tap and Connector Assembly 1 Threaded Connector Sets M8, M10, M12, M14 4 Standard System Connectors 4 Specialist System Connectors - Ford, GM, Fiat, Renault 4 46
Diagnostics Fuel Pressure Testing 314820V2 Fuel Injection Pressure Testing Kit for Multi-Point Systems A basic starter kit, based on the 314800V2 kit (above) Additional components can be added individually at a later stage Contents 314820V2:- Component Qty Multi-Point Fuel Pressure Gauge Assembly 31487100 1 Rubber Fuel Hose Extensions 5 Fuel Tap and Connector Assembly 1 Threaded Connector Sets M8, M10 2 314850V2 Fuel Injection Pressure Testing Kit for Single-Point Systems A universal kit which covers a wide range of both mechanical and electronic single-point fuel injection systems Shock protected dual scale gauge, fuel resistant Relief valve for safe depressurisation Quick coupling adaptors and hose connections Specification:- 450mm rubber fuel hose, with additional hose extensions Gauge scale 0 2bar, 0 30psi Gauge diameter 80mm Contents 314850V2:- Component Qty Single-Point Fuel Pressure Gauge Assembly 31487200 1 Rubber Fuel Hose Extensions 4 Fuel Tap and Connector Assembly 1 Threaded Connector Sets M12, M14 2 Standard System Connectors 1 Specialist System Connectors Ford, GM 2 47
Diagnostics Fuel Pressure Testing 314860V2 Combined Fuel Injection Pressure Testing Kit for both Single and Multi-Point Systems Combines all the components required for single and multi-point testing Combined contents of:- 314800V2 Multi-Point Testing Kit 314850V2 Single-Point Testing Kit Contents 314860V2:- Component Qty Multi-Point Fuel Pressure Gauge Assembly 31487100 1 Single-Point Fuel Pressure Gauge Assembly 31487200 1 Rubber Fuel Hose Extensions 5 Fuel Tap and Connector Assembly 1 Threaded Connector Sets M8, M10, M12, M14 4 Standard System Connectors 4 Specialist System Connectors - Ford, GM, Fiat, Renault 4 Fuel Injection Special Adaptors - Available Individually Specifications:- Reference Tool 31481000 Land Rover Adaptor Kit 31488000 Ford EECIV flexible adaptor 31488500 Fiat / GM quick-connect System connectors (2) 31489000 Renault plastic T connectors (2) 48
Diagnostics Fuel Pressure Testing 31450000 Diesel Injector Tester & Aspirator (DITA) A mechanical pressure tester and aspirator, for checking the correct operation of diesel injectors. Tests nozzle opening pressure, injector spray pattern and correct needle seating Suitable for testing all mechanical injectors with 12mm & 14mm screw fittings Safety features:- Mechanically damped gauge, prevents over-pressurisation Built-in aspirator removes test fluid spray Safety viewing screen Universal clamp for holding injectors securely Reservoir level indicator (test fluid can be re-used) Specification:- Gauge scale 0 400bar, 6000psi. Gauge diameter 107mm Maximum injector diameter 70mm Supplied with 12mm and 14mm quick-fit injector adaptors Vacuum Testing 31440000 Catalyst Back Pressure / Vacuum Tester Measures the back pressure (or vacuum) via the Lambda Sensor socket, to indicate blocked or damaged catalytic converters Calibrated gauge scale indicates progressive pass / fail for tests at idle speed and for tests under load. Specification:- Gauge scale = -1 to + 2 bar 2m heat resistant pipe for dynamic testing Suitable for M12 x 1.25 and M18 x 1.5 Lambda Sensor sockets Fits most European, Asian, Japanese vehicles Contents 31440000:- Component Qty Pressure Gauge and Hose Assembly 31440100 1 Lambda Sensor Socket connectors M12, M18 2 Thread Cleaners M12 x 1.25, M18 x 1.5 2 Special Adaptor for Toyota vehicles 1 Service Kit of seals and washers 1 49
Diagnostics Vacuum Testing 01390000 Vacuum Systems Tester Kit Suitable for a wide variety of engine diagnostic tests Also suitable for brake bleeding, brake servo tests, and identifying leaks in fuel lines, air-con systems, heater cores etc Precision die-cast metal hand pump develops and holds the vacuum Supplied with a comprehensive range of nozzles, plugs and adaptors for most vacuum test applications, and with bleed nipple adaptors and fluid jar for brake bleeding Optional extra:- Converter for use with turbo chargers 01390800 01395000 Vacuum Pump Kit Light weight plastic bodied hand pump Supplied with a comprehensive range of nozzles, plugs and adaptors for most vacuum test applications 01397000 Vacuum Gauge Test Kit Suitable for testing a wide range of Automotive vacuum applications Specification:- Heavy duty 80mm dual scale compound gauge Gauge scales 0-30in Hg/ 1 bar, or mmhg / psi Contents 01397000:- Component Qty Vacuum Gauge Assembly 01397500 1 Polyurethane Hose 1/16 id (3/16 od) 1 Set of vacuum connectors 1 50
Diagnostics Cooling System Pressure Testing The Sykes-Pickavant Cooling System Pressure Testing range, consists of three different systems, each of which has its own unique features and a wide range of bayonet connectors, cap adaptors and system connectors, some of which can be used with more than one system, bringing a great amount of flexibility to the range. The Sykes-Pickavant Cooling System Range includes:- 317 Series quick-connect system, hand pump and gauge, with specially designed pressure release valve, for system testing 318 Series threaded-connect system with unique SP pump unit, for system and cap testing 319 Series universal expansion plug system, for use with hand pump, or with airline adaptor (for HGV), compatible with 318 Series threaded caps and adaptors 317 Series 03170100 Pump, Gauge and Hose assembly c/w quick-connect coupling Self-testing metal hand pump with precision gauge Pressure release valve on pump, allows system test pressure to be discharged independently of the cap connection 331700V2 317 Series Basic System Testing Kit (3 piece) 03170100 pump, gauge and hose assembly Standard bayonet connector M52 threaded system connector Refer to applications chart for full systems applications 51
Diagnostics 317 Series 33179700 317 Series Standard European System Testing Kit (9 piece) 03170100 pump, gauge and hose assembly Standard and large bayonet connectors Small bayonet connectors for French and Japanese applications Threaded system connectors M45, M48, M52, M58 Refer to applications chart for full systems applications 331795V2 317 Series Master System Testing Kit (16 piece) 03170100 pump, gauge and hose assembly Standard and large bayonet connectors Small bayonet connectors for French and Japanese applications Threaded system connectors M45, M48, M52, M58 Specialist bayonet connectors for latest French and Japanese vehicles Specialist system adaptors for Ford, VAG Specialist system connectors for BMW, Ford, GM Refer to applications chart for full systems applications 318 Series 03180100 Hand Pump Unit c/w bayonet connector fitting Durable hand pump with precision gauge Gauge scale indicates cap pressure tolerance zones Connects to bayonet systems Tests bayonet type radiator caps 52
Diagnostics 318 Series 33180000 318 Series Basic Cap and Cooling System Test Kit (2 piece) 03180100 hand pump unit Double-ended hose assembly with standard bayonet fittings 33189000 318 Series Standard European Cap and Cooling System Test Kit (7 piece) 03180100 hand pump unit Single and double-ended hose assemblies with standard bayonet fittings Threaded system connectors M45, M52 Threaded cap adaptors M45, M52 33189500 318 Series Master Cap and Cooling System Test Kit (13 piece) 03180100 hand pump unit Single and double-ended hose assemblies with standard bayonet fittings Small bayonet connectors for French and Japanese applications Threaded system connectors M45, M48, M52, M58 Threaded cap adaptors M45, M48, M52 Bayonet cap adaptor for Japanese applications 53
Diagnostics 319 Series 03190100 Pump, Gauge and Hose Assembly Self testing hand pump with precision gauge and pressure release valve Threaded connection for Universal Expansion Plugs, or 318 series threaded connectors 33190000 319 Series Expansion Plug System Test Kit Car Kit 03190100 pump, gauge and hose assembly Expansion Plugs nos. 1, 2 & 3 Safety retaining clamp Thermometer Special bayonet connector for Japanese applications Optional extra:- 03191500 Stepped Expansion Plug for Mercedes 33190500 319 Series Expansion Plug System Test Kit HGV Kit 03193000 Airline Adaptor and Gauge Assembly Expansion Plugs nos. 3 & 4 Safety retaining clamp Thermometer Optional extra:- 03191500 Stepped Expansion Plug for Mercedes 54
Diagnostics 319 Series 33194000 Combustion Leakage Tester Compatible with all Sykes-Pickavant Cooling System Testers 317, 318 & 319 Series Diagnose cylinder head leaks by detecting the presence of CO 2 in the cooling system Fluid colour change indicates the presence of CO 2 Variable pressure valve allows for use with motorcycles, cars, vans and HGV Supplied with both Standard and Sensitive Reaction Fluid, for accurate diagnosis of cooling system faults. Replacement Reaction Fluid:- Standard 33194270 Sensitive 33194470 A strong colour change from blue to yellow, using either the standard or sensitive reaction fluid, indicates the presence of carbon dioxide in a vehicle s cooling system 55
OPEN CLOSED OPEN OPEN OPEN OPEN CLOSED CLOSED CLOSED CLOSED Sykes-Pickavant 331714 Sykes-Pickavant 331806 Sykes-Pickavant 331815 031725 www.sptools.co.uk Diagnostics Cooling System Tester Range System Connectors, and Cap Adaptors for the Sykes-Pickavant Cooling System Tester Range. Connectors are listed by system type:- 317 318 319 series Contents of kits described on previous pages, are clearly shown. Specifications 317 Series:- Application Picture Type Reference Radiator System Connectors : 317 series Quick Connectors Citroën, Ford, Honda, Japanese cars, System Connector:- Austin Rover, Mercedes, Proton, Standard Bayonet Rover, Vauxhall / Opel. Medium and Heavy Commercial Vehicles System Connector:- Large Bayonet 331700V2 33179700 331795V2 Kit Contents 03170200 03170300 Daihatsu, Honda, Hyundai, Isuzu, Mazda, Mitsubishi, Nissan, Subaru, Suzuki, Toyota Later Japanese cars. BMW, Ford, GM, Land Rover, Range Rover, Vauxhall / Opel. 031716 031716 System Connector:- Small Japanese Bayonet System Connector:- Small Japanese Bayonet System Connector Threaded Cap M52: 03171600 03171700 03172400 Citroën, Fiat, Austin Rover, Peugeot, Renault, Rover, Saab, Volvo. 031724 System Connector:- Threaded Cap M45: 03172500 Volkswagen, Audi. (use with 03182000 threaded adaptor to add M58 VW / Audi caps) Peugeot, Citroën, Nissan. 031726 031725 System Connector:- Threaded Cap M48: System Connector:- Large Bayonet: 03172600 03182000 03178700 Vauxhall Vectra. 03178700 System Connector:- Threaded Cap M52: 33170400 Ford Scorpio. 33170400 System Connector:- Threaded Cap M52: 33170500 BMW, Range Rover 33170500 System Connector 33171400 Volkswagen, Audi. Threaded Cap Adaptor 33180600 Galaxy, Sharan. Threaded Cap Adaptor 33181500 56
OPEN CLOSED OPEN OPEN CLOSED CLOSED OPEN CLOSED OPEN OPEN CLOSED Sykes-Pickavant 331714 OPEN CLOSED www.sptools.co.uk Diagnostics Cooling System Tester Range Specifications 318 Series:- Application Picture Type Reference Radiator System Connectors : 318 series Threaded Connectors Citroën, Ford, Honda, Japanese cars, Bayonet Connector Austin Rover, Mercedes, Proton, Double Ended Rover, Vauxhall / Opel. Pump connector hose for System Connectors Bayonet Connector Single Sided 33180000 33189000 33189500 Kit Contents 03180200 03182200 BMW, Ford, GM, Vauxhall / Opel. Land Rover, Range Rover. System Connector Threaded Cap M52: 03182400 Austin Rover, Citroën, Fiat, Peugeot, Renault, Rover, Saab, Volvo. 031824 System Connector Threaded Cap M45: 03182500 Volkswagen, Audi. 031825 CLOSED System Connector Threaded Cap M48: 03182600 Citroën, Nissan, Peugeot. 031826 System Connector Large Bayonet: 03188700 Daihatsu, Mazda, Mitsubishi, Nissan, Subaru, Toyota, Some Honda motorcycles. 03188700 System Connector:- Small Japanese Bayonet: 03191600 Later Japanese Cars 031960 System Connector:- Small Japanese Bayonet: 03191700 031917 Vauxhall Vectra. System Connector:- Threaded Cap M52: 33180400 Ford Scorpio. 33180400 System Connector or Threaded Cap M52: 33180500 Galaxy, Sharan. 33180500 System Connector 33180900 Range Rover / BMW. 031824 System Connector 33181400 Ford Focus, C-Max 03 - System Connector 33181700 Daihastsu, Honda, Hyundai, Isuzu, Mazda, Mitsubishi, Nissan, Subaru, Suzuki, Toyota. 031824 Cap Adaptor - Small Japanese Bayonet 03185200 031852 57
Sykes-Pickavant 031896 Sykes-Pickavant 331806 Sykes-Pickavant 031896 Sykes-Pickavant 331815 Sykes-Pickavant 031896 Sykes-Pickavant 331815 Sykes-Pickavant 331815 Sykes-Pickavant 031820 Sykes-Pickavant 031866 OPEN CLOSED www.sptools.co.uk Diagnostics Cooling System Tester Range Specifications 318 Series:- Continued Application Picture Type Reference Radiator System Connectors : 318 series Threaded Connectors Japanese Vehicles Cap Adaptor - Japanese Bayonet 03186700 33180000 33189000 33189500 Kit Contents Volkswagen (Use with 03182600 to connect to M58 threads) Cap Adapto - Threaded Adaptor M48/M58 03182000 BMW, Ford, GM, Land Rover, Range Rover, Vauxhall/Opel. Citroën, Fiat, Austin Rover, Peugeot, Renault, Rover, Saab, Volvo. Audi, Volkswagen. Sykes-Pickavant 031877 Cap Adaptor - 03186600 Threaded Adaptor M52: Cap Adaptor - 03187700 Threaded Adaptor M45: Cap Adaptor - 03189600 Threaded Adaptor M48: Volkswagen, Audi. Cap Adaptor - Threaded Adaptor 33180600 BMW / Range Rover. Cap Adaptor - Threaded Adaptor 33180800 Volkswagen. Cap Adaptor - Threaded Adaptor 33181000 Scorpio. Cap Adaptor - Threaded Adaptor 33181200 Volkswagen, Audi. Cap Adaptor - Threaded Adaptor 33181300 Galaxy, Sharan. Cap Adaptor - Threaded Adaptor 33181500 Ford Focus, C-Max 03 - Cap Adaptor - 33181800 031824 58
Diagnostics Cooling System Tester Range Specifications 319 Series:- Application Picture Type Reference Radiator System Connectors : 319 series Threaded Connectors No.1 Universal Expanding Connector Expansion Plug (21-38mm) 33190000 33190500 Kit Contents 03191100 No.2 Universal Expanding Connector Expansion Plug (27-42mm) 03191200 No.3 Universal Expanding Connector Expansion Plug (33-50mm) 03191300 03193300 (less handle) No.4 Universal Expanding Connector Expansion Plug (40-65mm) 03191400 No.5 Stepped Expanding Connector (Mercedes) Expansion Plug (27-44mm) 03191500 Daihatsu, Mazda, Mitsubishi, Nissan, Subaru, Toyota, Some Honda motorcycles. System connector:- Small Japanese Bayonet 03191600 031960 Cooling System Thermometer 03192500 Airline Adaptor & Gauge Connector 03193000 Note: 319 Series is compatible with all 318 Series system connectors and adaptors. 59
Brake & Suspension Tools Brake Service Tools Brake Pipe Nut Spanners (pressed steel) Can be used on brake or hydraulic pipes Chrome plated steel Specifications Reference Application Size 66067000 Brake pipe nuts 7 /16" x 9 /16" AF 66068000 Brake pipe nuts 11mm x 13mm 66069000 Brake pipe nuts 10mm x 11mm 66067800 Set of Flanged Flare Nut Wrenches (5) Flanged Flare Nut Wrenches (forged steel) 6 point split ring design, with flange for added strength Ideal for brake pipe nuts and unions Contents 66067800:- Also sold individually Reference Application Size 66067100 Brake pipe nuts 7mm x 9mm 66067200 Brake pipe nuts 8mm x 10mm 66067300 Brake pipe nuts 11mm x 13mm 66067400 Brake pipe nuts 12mm x 14mm 66067500 Brake Pipe Nuts 17mm x 19mm Also available individually Reference Application Size 66067600 Brake pipe nuts 10mm x 11mm 60
Brake & Suspension Tools Brake Pipe Cutting & Bending 66092500 Mini Pipe Tube Cutter 3 22mm One-hand operation, ideal for on-the-vehicle working 02210000 Telescopic Pipe Cutter 3 32mm Telescopic action cutter Grooved rollers allow for cutting close-up to flared pipe ends C/w fold-away de-burring blade and spare cutter wheel Replacement cutter wheels available (02210100 pack of 2) 02160000 Brake Pipe Aid Pliers For forming tight bends in brake and clutch pipes Ideal for use in restricted space, and for use on-the-vehicle For 3 /16" or 4.75mm pipe 02260000 Pipe Bending Tool Suitable for use with steel, copper, brass tubing (inc. Diesel Fuel Pipe) Produces bends up to 180 Fitted with lug on handle for bench use with a vice Pipe sizes:- 3 /16" to 3 /8" 4.75mm to 10mm 02560000 Pipe Bender for Plastic Coated Pipes Unique rolling action forms bends up to 180 without causing abrasion to plastic coating Fitted with lug on handle for bench use with a vice Pipe sizes:- 3 /16" to 1 /4" 4.75mm to 6mm 61
Brake & Suspension Tools Brake Pipe Flaring 270 Series Brake Pipe Flaring Tools Unique Dial-a-Size turret design Lever cam operation for quick flaring Automatic punch extraction from flare Produces both convex and double lap flares to SAE and DIN standards Variety of kits available to suit requirements All components available individually 02700800 270 Brake Pipe Kit Specifications:- Reference Flare Pattern 3 /16" 1 /4" 5 /16" 3 /8" 1 /2" 4.75m 6mm 8mm 10mm 12mm 02700000 SAE convex single X X X X X DIN convex single X SAE / DIN double X X X X X 02700100 SAE convex single X X DIN convex single SAE / DIN double X X 02700200 SAE convex single X X X X X DIN convex single X SAE / DIN double X X X X X 02700800 SAE convex single X X X X X X X X X X DIN convex single X SAE / DIN double X X X X X X X X X X 02700900 SAE convex single X X X X DIN convex single X SAE / DIN double X X X X 270 Series Individual punch and die pricing:- Punch Die Set Reference Reference 02705100 02703100 02705200 02703200 02705300 02703300 02705400 02703400 02705500 02703500 02706100 02704100 02706200 02704200 02706300 02704300 02706400 02704400 02706500 02704500 02707100 02704700 02707200 02704800 02707300 02704900 02705000 62
Brake & Suspension Tools Brake Pipe Flaring 270 Series Individual punch and die selection chart:- Flare Pattern Tube o.d. 270 Series Individual Selection Punch Die Set SAE convex (single) 3 /16" 02705100 02703100 1 /4" 02705200 02703200 5 /16" 02705300 02703300 3 /8" 02705400 02704400 1 /2" 02705500 02703500 6mm 02705200 02704200 8mm 02705300 02704300 10mm 02705400 02704400 12mm 02705500 02704500 DIN convex (single) 4.75mm 02706100 02704100 6mm 02706200 02704700 8mm 02706300 02704800 10mm 02706400 02704900 12mm 02706500 02705000 SAE / DIN (double) 3 /16" 02705100 02703100 02707100 1 /4" 02705200 02703200 02707100 5 /16" 02705300 02703300 02707200 3 /8" 02705400 02703400 02707200 1 /2" 02705500 02703500 02707300 4.75mm 02705100 02704100 02707100 6mm 02705200 02704200 02707100 8mm 02705300 02704300 02707200 10mm 02705400 02704400 02707200 12mm 02705500 02704500 02707300 02700000 02700900 63
Brake & Suspension Tools Brake Pipe Flaring 02720000 Flaremaster Automotive Hand-Held Flaring Tool Patented design, for producing high quality flares On-the-Vehicle Unique hydraulic power unit provides ultimate power for precision flaring Creates SAE & DIN single and double flares ( 3 /16 and 4.75mm pipe) Flaring pipes On-the-Vehicle allows for accurate repair sections to be spliced in following repair work or accident damage. 02720500 Flaremaster Brake Pipe Kit All the tools you need for successful On-the-Vehicle brake pipe flaring Contents 02720500:- Also sold individually Reference Description 02720000 Flaremaster 02160000 Brake Pipe Aid Pliers 02210000 Telescopic Pipe Cutter 3-32mm 02730000 Pipe De-burring Tool Brake Fluid Testing 03530000 Brake Fluid Tester 12v operation from vehicles own supply Works on all brake fluids with boiling points up to 320 C DOT 3, DOT 4 and DOT 5.1 Displays battery voltage, and boiling point of fluid Simple pass or fail indicator 64
Brake & Suspension Tools Brake Bleeding 03490000 Pressure Brake Bleeder Economy Model One-man operation Air pressured fluid to fluid change Unique reservoir design separates fluid from air, preventing contamination C/w master cylinder cap adaptor set 03550000 Pressure Brake Bleeder Professional Model One-man operation Air purging / evacuation system, or fluid to fluid change Unique reservoir design separates fluid from air, preventing contamination C/w accessories :- Master cylinder cap adaptor set Universal cylinder cap adaptor Fluid drain bottle and bleed pipe Fluid top-up siphon tube In-line water separator / filter assembly 03580000 Professional Brake Bleeder One-man operation, an average of 15 minutes to bleed a system 12v. supply from vehicle battery, powers a Peristaltic Pump unit Pressurizes system to maximum of 1.4 bar, protecting ABS systems Compatible with DOT 3, DOT 4, DOT 5.1 and DOT 5 synthetic fluids Manufactured from non-corrosive stainless steel Replacement pump available (03580400) C/w accessories :- Master cylinder cap adaptor set Universal cylinder cap adaptor Fluid drain bottle and bleed pipe Fluid top-up siphon tube 65
Brake & Suspension Tools Brake Bleeding 03585000 Professional Brake Bleeder c/w Trolley As per 03580000, with mobility kit for ease of movement 66050000 Brake Bleeder Bottle c/w non-return valve For one-man operation Non return valve ensures air does not return back into the system Brake Caliper Tools 03600000 Ratcheting Caliper Piston Windback Tool Designed for use on calipers with integral handbrake Set of flanges (4) for different piston designs Integral ratchet saves repositioning tool 66
Brake & Suspension Tools Brake Caliper Tools 03610000 Caliper Piston Windback Tool For both push-back and wind-back brake caliper pistons Allows correct amount of pressure to be applied to return piston within its housing, without risk of damage 03619500 Caliper Piston Windback Tool As per 03610000, with additional applications Additional Application Specifications:- 03610500 03610600 03610700 03610800 03610900 03611300 03611400 Adaptor 1 Adaptor 2 Adaptor 3 Adaptor 4 Adaptor 5 12mm hex Renault GM, Nissan Peugeot, Rover, Subaru, VAG Honda, Rover 200 Rover 400 BMW,GM, Jaguar, Mercedes, Toyota Honda, Mazda, Mitsubishi Citroën XM VAG Group Renault 03610000 Std. Kit X X X X X 03619500 Master Kit X X X X X X X 66066500 Caliper Piston Windback Tool Basic model c/w adaptor no. 1 only 66066000 Caliper Hex Wrench for 7mm caliper bolts For tightening / untightening brake caliper bolts on Ford Escort, Fiesta and Orion and for setting valves on VW Golf and Polo 1.05, 1.1 and 1.3 litre engines 67
Brake & Suspension Tools General Brake Service Tools 02150000 Hose Clamps (2) Lightweight, adjustable clamps for flexible hoses Ideal for brake, fuel or cooling system hoses, particularly where access is restricted 03570000 Brake and Fuel Line Clamp Lightweight reinforced nylon clamp 66065000 Hydraulic Hose Clamp Suitable for brake and fuel line hoses 03560000 Brake Pin Punch Set (2) For removing and replacing brake pad retaining pins 7 /32" diameter pin, for general applications 6mm diameter pin, for GM applications with hollow spring pins 03590000 Brake Spring Tool For removing and replacing brake shoe pull-off springs Cranked for easy access, with a grooved tip for stretching the spring 68
Brake & Suspension Tools General Brake Service Tools 03630000 Brake Cylinder Circlip Retainer Special tool to expand and hold the retaining circlip on brake cylinders Also releases the locking circlip on GM drive shafts 03640000 Brake Spring Washer Tool Double-ended tool for removal and installation of both large and small anti-rattle spring washers found on brake drum assemblies. 03701100 Brake Spring Plier Standard model for Car / Van applications For the safe and easy removal of brake shoe springs Can be used in either RH or LH situations Floating head minimises risk of damage to components 03701200 Brake Spring Plier Large model for Van / HGV applications For the safe and easy removal of brake shoe springs Can be used in either RH or LH situations Floating head minimises risk of damage to components 07610000 Magnetic Base Used for measuring disc run-out Powerful magnetic clamp, with on / off lever for easy removal from surfaces Suitable for both flat and round surfaces Universal clamp for DTI with fine adjustment 69
Brake & Suspension Tools Coil Spring Compressors 089400V2 Heavy Duty Coil Spring Compressor Safe working load 15000N 24mm hex drive for use with low impact torque air wrenches, or ratchet & socket Hex drive incorporates a shear pin for safety overload protection Replacement shear pins available (08942400 pack of 5) Can be used in-situ, or bench mounted in a vice Supplied with 2 sets of colour coded jaws (red / yellow) 08960000 Heavy Duty Coil Spring Compressor As per 089400V2, but c/w 4 sets of colour coded jaws Supplied in steel storage case Not supplied with mounting bracket 08952770 Coil Spring Compressor Jaws Specifications:- Jaw Reference Jaw Colour Spring Diameter -mm 089400V2 08960000 Contents Contents 08904000 - Small Green 66 108 X 08902000 - Medium Yellow 80 140 X X 08901000 - Large Red 100 180 X X 08903000 X Large Blue 150 236 X NB. All jaws are supplied as singles when sold individually. 70
Brake & Suspension Tools Coil Spring Compressors 898 Series Telescopic Coil Spring Compressor System This NEW concept in Coil Spring Compressing brings safety and efficiency to the workshop, with a system of products designed to simplify the task, whilst improving safety and efficiency for the operator. The concept consists of four basic products, each of which can be used on their own, or as part of the complete system:- Telescopic Coil Spring Compressor c/w interchangeable jaws Strut Workstation for spring compression and jaw storage Strut Vice workstation, or bench mounted Strut Support Arm turns strut removal into a one-man operation 08980000 Telescopic Coil Spring Compressor Mechanical Coil Spring Compressor with 20000N capacity 2-stage telescopic body, with 22mm hex drive, shear-pin protected Use with impact air wrenches, or ratchet & socket Select from 14 different sets of Jaws full applications list provided Hex drive incorporates shear pin for safety Replacement shear pins available (U.89M20J5) 08982000 Telescopic Coil Spring Compressor Set 08980000 Coil Spring Compressor body C/w three pairs of jaws - J1 J2 J3 Full applications list provided Coil Spring Compressor Jaw Sets Open fitting system of fork-to-body, saves space especially when working on-the-vehicle Sculpted jaws maximise contact and minimise risk of slippage Offset design of some forks to fit smaller strut recesses Ideal for use with tapered springs, using different top and bottom jaws Refer to full applications list for details 898 Series Coil Spring Compressor Jaws Applications List ( refer to printed list for full details ) 71
Brake & Suspension Tools Coil Spring Compressors Reference Spring Spring Applications Diameter Diameter Min-mm Max -mm 089800J1 99 156 Universal Applications Medium 089800J2 129 174 Universal Applications Large 089800J3 139 218 Universal Applications X Large 089800J4 75 130 Citroën C15 / Peugeot 306 089800J5 71 119 Universal Applications - Small 089800J6 110 175 Chrysler Voyager 2.5 TD (97) 089800J7 120 170 Renault R20 R30 089800J8 131 182 Renault Espace ( 88-91) 089800J9 101 162 Citroën Saxo, Berlingo / Peugeot 106, 306, Partner 089800J12 145 offset 170 offset BMW Mini, 320 / Citroen Picasso, Xsara / Fiat Marea, Stilo / Peugeot 206, 307, 406 / Renault Clio, Laguna, Megane 089800J14 170 offset 195 offset Fiat Brava, Bravo, Marea, Multipla / Citroën C8 / Toyota RAV4 089800J25 127 167 Fiat Seicento / Renault 25 U.89JM 100 215 Universal Applications Asymmetric springs NB: All jaws sold as pairs 08980100 Strut Workstation (tools not included) Space-saving solution for all tools required during strut replacement Special tool-holder for 08980000 Coil Spring Compressor Can accommodate either fixed, or swivel-type strut vices Storage for up to 6 pairs of Jaws 08980200 Strut Vice For use with 08980100 Workstation, or can be bench-mounted Fixed clamp type of vice, holds struts firmly in place 72
Brake & Suspension Tools Coil Spring Compressors 08980300 Quick Action Strut Vice For use with 08980100 Workstation, or can be bench mounted Swivel-type vice, rotates through 180, with 5 locking positions Quick release mechanism for fast opening and closing of vice Can also be used for transmissions, exhausts etc 08985000 MacPherson Strut Support Arm Designed for removal and replacement of struts, without the need for removing suspension arms, splitting ball joints, or removing drive shafts Exerts upward pressure on the base of the strut, thereby constricting the coil spring, and allowing the hub to be safely separated from the strut Saves time, reduces risk of damage to unrelated parts, and turns this into a genuine one-man operation Ideal for use on BMW, Ford, GM, PSA, Renault and VAG vehicles Recommended as an essential tool when working on BMW Mini and VW Golf Mk4 Suspension Removal 08380000 Coil Spring Compressor Screw Type Set of two threaded screws with hook-type jaws, for removal of coil springs Safe working load 9000N (using both screw assemblies) 270mm max. jaw capacity 24mm drive nut size (NB Not designed for use with air powered impact wrenches) 73
Brake & Suspension Tools Suspension Removal 08380500 Coil Spring Compressor Screw Type As per 08380000, but set of three threaded screws and hook-type jaws For additional safety when working on modern high-tension springs 08920000 MacPherson Strut Nut Remover Set Set of 4 top nut sockets for popular VAG and Rover applications Designed to hold the damper shaft in place during removal and refitting 24mm hex drive 66032000 Coil Spring Compressor General purpose coil spring compressor, with helical profile hooks 170mm max Jaw capacity 66033000 Mini Suspension Compressor For use on BLMC Mini s fitted with rubber cone suspension units Supplied with both Metric & Imperial extension screws, to cover all applications 08710000 GM Vectra Bush Remover For quick removal and replacement of upper and lower trailing arm bushes on GM Vectra s 74
Brake & Suspension Tools Ball Joint Separators 08070000 Ball Joint Separator Lever Type HGV applications Strengthened fork and lever, allows for greater force to be applied Jaw opening capacity 70mm, jaw width 36mm Can be upgraded to hydraulic power (use 08075000 Upgrade Kit) 08075000 Hydraulic Upgrade Kit for use with 08070000 HGV Ball Joint Separator Uses hydraulic power from the SP 1500 series Hydraulic Ram Provides up to 8 tonnes of hydraulic pressure Contents:- Hydraulic Ram Adjusting Screw & Plunger 18070000 Hydraulic Ball Joint Separator Lever Type HGV applications Hydraulic version of the 08070000 HGV ball joint separator Uses hydraulic power from the SP 15000 series Hydraulic Ram Provides up to 8 tonnes of hydraulic pressure 66055000 Ball Joint Separator Lever Type - car / LCV applications Jaw opening capacity 45mm, jaw width 19mm 75
Brake & Suspension Tools Ball Joint Separators 66055200 Ball Joint Separator Lever Type Car / LCV applications Adjustable screw c/w shear pin, allows for greater flexibility, providing a wider range of applications coverage Shear pin prevents accidental overload for safety Jaw opening capacity 45mm, jaw width 22mm 08190000 Ball Joint Separator Direct Action Type LCV applications Jaw opening capacity 55mm jaw width 25mm 66031000 Ball Joint Separator Direct Action Type - car applications Jaw opening capacity 50mm, jaw width 19mm 08060000 Long Reach Ball Joint Splitter Fork Type Ideal for ease of access, without being restricted by wheel arches Length 420mm, jaw width 19mm 08160000 Ball Joint Splitter Fork Type Length 250mm, jaw width 19mm 66049000 Ball Joint Splitter Fork Type Length 195mm, jaw width 19mm 76
Brake & Suspension Tools Suspension Sockets A range of specialised sockets for steering and suspension applications:- Reference Size Sq. Drive Type Application 01520500 1. 1 /2" hex 1 /2" Ball joint BLMC Mini, Allegro, Maxi 01530500 1. 13 /16"13/16 hex 1 /2" Ball joint Austin/Rover Metro 61572500 35mm male hex 1 /2" Ball joint Peugeot / Citroën (use with 01520500) 01540500 30mm hex 1 /2" Hub nut GM Astra, Cavalier, Nova etc 01570500 41mm hex 3 /4" Hub nut Ford Sierra, Sapphire 61521500 1. 5 /16" hex 1 /2" Hub nut Austin / Rover 61541500 32mm hex 1 /2" Hub nut Fiat, Ford, Austin/Rover, PSA 61542500 35mm hex 1 /2" Hub nut Peugeot / Citroën 77
Brake & Suspension Tools Suspension Sockets A range of specialised sockets for steering and suspension applications:- (Continued) Reference Size Sq. Drive Type Application 61543500 36mm hex 1 /2" Hub nut Volkswagen (also GM clutch) 61544500 36mm bi-hex 1 /2" Hub nut Fiat / Lancia (also Saab ABS) 61545500 40mm hex 1 /2" Hub nut Austin/ Rover, Peugeot 305,405 61546500 45mm hex 3 /4" Hub nut BMW 3 series, 5 series 61548500 50mm bi-hex 3 /4" Hub nut Ford Transit 34-H axle 61549000 56mm bi-hex 3 /4" Hub nut Ford Transit 51-G axle 61549500 65mm hex 3 /4" Hub nut Ford Transit 51A-G, 53-G axles 61573500 Specialist fitting 1 /2" Lock nut Ford Transit 34 axle series 78
Brake & Suspension Tools Hub Pullers 18500000 Hydraulic Hub Puller Universal hydraulic hub puller, uses power from the SP1500 series ram (8 tonnes) Compatible with 3, 4, 5 & 6 stud wheel hubs Can be used with the following thread forms :- M12 x 1.25 studs M12 x 1.5 studs M14 x 1.5 studs M12 x 1.25 extended nuts M12 x 1.5 extended nuts Full vehicle applications chart supplied 08530900 Heavy Duty Slide Hammer Assembly 4.1kg hammer weight Use with 18500000 Hub Puller in place of hydraulic ram Uses 1. 1 /2W threaded adaptor (supplied) Can be used in many applications, in place of SP 1500 series Ram 08530000 Hub Puller c/w Force Screw General purpose hub puller, for use with 4 & 5 stud hubs Suitable for hubs with a spread of 52 74mm (hub plate 08530800) Can be upgraded with slide hammer 08530700 08530600 Hub Puller c/w Slide Hammer General purpose hub puller, for use with 4 & 5 stud hubs Suitable for hubs with a spread of 52 74mm (hub plate 08530800) Supplied with light duty slide hammer 08530700 1.6kg hammer weight 79
Brake & Suspension Tools Steering Pullers 08350000 Steering Wheel Puller GM Specially designed puller for the removal of GM steering wheels 1 tonne pulling capacity 15050000 Hydraulic Drop Arm Puller Hydraulic puller for removing steering box drop arms Uses power from the SP 1500 series Ram Ideal for Ford Transit and Land Rover applications Jaw spread capacity 60mm 16050000 HGV Hydraulic Drop Arm Puller Hydraulic puller for removing steering box drop arms on a wide variety of HGV applications (eg. Volvo, Scania, Iveco, MAN, Mercedes) Uses power from the SP 1600 series HD Ram (16 tonnes capacity) Jaw spread capacity 105mm 80
Brake & Suspension Tools Steering Pullers 11200000 Hydraulic King Pin Press Kit HGV applications Hydraulic power supplied by SP Loadstar 20 tonne Pump & Ram Wide variety of HGV applications Kit contents:- 20 tonne Pump & Ram Press Frame capacity 165mm spread, 450mm depth. Auto-Grip Collar with three extensions 18mm, 21mm, 25mm diameters Wheel & Tyre Tools 08930000 Wheel Stud Re-Threading Kit For repairing stripped or damaged threads, by re-forming existing thread For wheel stud sizes:- M12 x 1.25 / M12 x 1.50 / M14 x 1.50 66074000 Tyre Pressure Gauge Dial Type Shock protected dual-scale gauge, manufactured to BS EN 12645 62mm diameter gauge:- Scales: - 0 50 psi. / 0 3.5 bar 66074500 Tyre Pressure Gauge Pencil Type Metal gauge with valve core remover and pocket clip 120mm pencil gauge:- Scales: - 6 50 psi. / 0.5 3.4 bar 03280000 Tyre Tread Depth Gauge MOT approved gauge, c/w pocket clip Measures 0 26mm in 1mm increments Inc. 1.6mm depth measurement for MOT regulations 81
Pullers Introduction For many years, Sykes-Pickavant have been renowned for providing high quality, innovative puller solutions. A huge variety of different puller designs, both hydraulic and mechanical, are available to cover a wide range of applications:- Puller Types Hydraulic Pullers These have a simple, grease filled ram instead of a mechanical force screw, producing extra power with ease. The spring loaded plunger provides direct, non twisting application of thrust, offering greater efficiency and security Mechanical Pullers These use a mechanical force screw Thin Jaw Pullers Available in both hydraulic and mechanical forms, these have special legs for use where clearance behind the gear or bearing is limited Separators For where all round support is required or where there is insufficient space for standard puller legs Slide Hammers Used when there is no shaft, making a conventional puller unsuitable Blind Housing Bearing Removers These operate without the need to dismantle machinery or remove the running shaft How to choose the right puller for the job Always use a 3 leg puller where possible. This gives a better load distribution Decide what spread is required. This is determined by the diameter of the part to be pulled Decide what reach is required. This must be at least equal to, or larger than the depth of the part that needs removal Estimate the force required. More force may be required for rusted parts or where there is large area of surface contact. Hydraulic pullers allow maximum force to be applied with minimum effort. Alternatively, choose a puller whose force screw diameter is at least half the size of the shaft of the item to be removed. If in doubt, use the next largest using an undersized puller may well slow down the job and may even prove ineffective. All Sykes-Pickavant pullers are made to a very high specification, but care should be taken to ensure that they are used safely and in accordance with good workshop practice. Always follow instructions where provided. Hand and eye protection should be worn. 82
Pullers How to choose the right puller for the job To make sure that you select the right puller for the job, use the Quick Reference Tables. Key to Quick Reference Tables:- Puller Spread Max (mm) Puller Reach Max (mm) External Reach Max (mm) External Spread (mm) Internal Spread Max (mm) External Reach (mm) Safe working load Tonnes Hydraulic Pullers Triple Leg Hydraulic Pullers Powered by the now famous 1500 Series hydraulic ram Wide range of applications Standard leg jaw 15340000 Individual Standard Leg Reference Specification mm mm mm Tonnes 15340000 100 100 50 8 Triple leg puller, powered by the 1500 Series ram. 15360000 150 150 100 8 Triple leg puller, powered by the 1500 Series ram. 15370000 150 250 150 8 Triple leg puller, powered by the 1500 Series ram. 15380000 200 100 150 8 Triple leg puller, powered by the 1500 Series ram. 15390000 250 250 150 8 Triple leg puller, powered by the 1500 Series ram. 83
Pullers Hydraulic Pullers Individual Thin Jaw Reference Specification Thin jaw leg 18650000 mm mm mm Tonnes 18640000 150 150 50 8 Triple leg puller, powered by the 1500 Series ram. 18650000 150 225 100 8 Triple leg puller, powered by the 1500 Series ram. Twin Leg Hydraulic Pullers Powered by the now famous 1500 Series hydraulic ram Wide range of applications 15280000 Individual Standard Leg Reference Specification Individual Thin Jaw mm mm mm Tonnes 15240000 100 100 50 8 Twin leg puller, powered by the 1500 Series ram. 15260000 150 150 100 8 Twin leg puller, powered by the 1500 Series ram. 15270000 150 250 150 8 Twin leg puller, powered by the 1500 Series ram. 15280000 200 100 150 8 Twin leg puller, powered by the 1500 Series ram. 15290000 250 250 150 8 Twin leg puller, powered by the 1500 Series ram. Reference Specification 18620000 mm mm mm Tonnes 18610000 150 150 50 8 Twin leg puller, powered by the 1500 Series ram. 18630000 150 225 150 8 Twin leg puller, powered by the 1500 Series ram. 18620000 225 225 150 8 Twin leg puller, powered by the 1500 Series ram. 84
Pullers Hydraulic Pullers Twin / Triple Hydraulic Puller Kits Powered by the now famous 1500 Series hydraulic ram Combination twin/triple leg puller kits complete with ram extensions Wide range of applications 15340500 Puller Kits Standard Leg Reference Specification mm mm mm Tonnes 15340500 100 100 50 8 Twin / triple leg puller in box. 15500000 150 150 50 8 Twin / triple leg puller, powered by the 1500 Series ram. Contains components to make up to 4 different pullers. In metal box. 15500300 150 150 50 8 Twin / triple leg puller, powered by the 1500 Series ram. Contains components to make up to 4 different pullers. In box. 15500800 200 200 50/100 8 Twin / triple leg puller, powered by the 1500 Series ram Contains components to make up to 6 different pullers. In metal box. 15510000 250 250 50/100/150 8 Twin / triple leg puller, powered by the 1500 Series ram. Contains components to make up to 10 different pullers. In metal box. 15510500 250 250 50/100/150 8 Twin / triple leg puller, powered by the 1500 Series ram. Contains components to make up to 8 different pullers. On metal storage / display panel. Puller Kits Thin Jaw Reference Specification 18650400 mm mm mm Tonnes 18650400 225 225 50/150 8 Twin / triple leg puller, powered by the 1500 Series ram. Contains components to make up to 7 different pullers. In metal box. 18650500 225 225 50/150 8 As above, but on metal storage / display panel. 85
Pullers Hydraulic Pullers Hydraulic Puller and Separator Kits Powered by the now famous 1500, and 1600 Series hydraulic rams Separators have tapered edge for insertion behind close fitting bearings, gears etc 15520000 Puller and Separator Kits Reference Specification mm mm mm mm Tonnes 15520000 150 150 105-20 876 8 Puller and separator, powered by the 1500 Series ram. Contains components to make 4 pullers and 1 separator. In metal box. 15520800 200 200 105-20 876 8 Puller and separator, powered by the 1500 Series ram. Contains components to make 6 pullers and 1 separator. In metal box. 15530500 250 250 105-10 876 8 Puller and separator, powered by the 1500 Series ram. Contains components to make 9 pullers, 2 separators and 7 split collet internal extractors. On metal storage / display panel. Puller and Separator Kits Hydraulic 86
Pullers Hydraulic Pullers Reference Specification mm mm mm Tonnes 15600000 140 35 150 40 863 8 Internal/ External Puller/ Separator Kit, powered by the 1500 Series ram. Internal application used where a conventional puller cannot be used. In metal box. 16200000 175 50 780 16 Hydraulic Bearing Puller / Separator Kit, powered by the 1600 Series ram. Twin beam with adjustable separator and 4 extension rods. In metal box. 19310000 105 20 876 8 Hydraulic Puller / Separator Kit, powered by the 1500 Series ram. In metal box. 19320000 140 35 863 8 Hydraulic Puller / Separator Kit, powered by the 1500 Series ram. In metal box. 19310300 105 20 876 8 As per 19310000 but in promotional box 16200000 In use 19310300 16200000 Puller and Separator Kits 87
Pullers Hydraulic Pullers 19310500 15540000 Reference Specification mm mm mm mm Tonnes 19310500 75 75 105 10 876 8 Combination of hydraulic and mechanical thin jaw puller with separator options, powered by the 1500 Series ram. Includes a range of split extractors for use with a slide hammer. On metal storage / display panel. 15540000 200 200 105-20 876 8 Hydraulic Puller / Separator Kit, powered by the 1500 Series ram. Contains components to make 10 pullers and 1 separator. In metal box. 15540500 250 250 105-20 876 8 Hydraulic Puller / Separator Kit, powered by the 1500 Series ram. Contains components to make 10 pullers and 1 separator. On metal storage / display panel 15570000 250 250 105-20 876 8 Hydraulic Internal / External Puller / Separator Kit, powered by the 1500 Series ram. Contains components to make 10 pullers and 1 separator. On metal storage / display panel 15580000 250 250 40-35 863 8 Hydraulic Internal / External Puller / Separator Kit, powered by the 1500 Series ram. Contains components to make 10 pullers and 1 large capacity separator. On metal storage / display panel Puller and Separator Kits: Continued 88
Pullers Hydraulic Pullers Reference Specification mm mm mm mm Tonnes 15590000 250 250 40-20 876 8 Master Hydraulic Internal / External Puller / Separator Kit, powered by the 1500 Series ram. Contains components to make 10 pullers, 1 internal puller, and 2 separators. In metal case. 16300000 400 280 175-50 780 16 Hydraulic Internal / External Puller / Separator Kit, powered by the 1600 Series ram. 2 sets of adjustable legs give 12 pulling options. Adjustable separator with 4 extensions. In wooden case. 1600 Series Hydraulic Heavy Duty Pullers Hydraulic, heavy duty puller kits powered by the 1600 Series ram with 16 tonnes of pulling power Wide range of applications 16100000 Twin / Triple Puller kit Reference Specification mm mm mm Tonnes 1610000 400 435 200 16 Twin / Triple Puller Kit, powered by the 1600 Series ram. 2 sets of adjustable legs giving 12 pulling combinations. In metal box Puller / Bearing Separator Kit 89
Pullers Hydraulic Pullers Reference Specification mm mm Tonnes 16200000 175 50 780 16 Hydraulic Separator Kit, powered by the 1600 Series ram. Twin beam with adjustable separator and 4 extension rods. In metal box. Puller and Separator Kit 16200000 16300000 Spare Parts and Components Hydraulic Pullers Reference Description Force 15000000 1500 Series Ram 8 Tonne hydraulic ram c/w nose piece 12000000 1200 Series Ram 12 Tonne hydraulic ram c/w nose piece 16000000 1600 Series Ram 16 Tonne hydraulic ram c/w nose piece A full range of spare parts, including beams, puller legs, collars and extensions are available. For a full list of Sykes-Pickavant puller components and kits, please refer to our dedicated puller literature. Loadstar Heavy Duty Hydraulic Puller and Separator Kits 90
Pullers Hydraulic Pullers Heavy duty puller kits powered by Sykes-Pickavant 20, 30 and 50 tonne hydraulic rams Rams can be used as a portable jack and toe lift Come complete with hand pump assembly All kits supplied in robust wooden storage case 20010000 20030000 Loadstar Puller kits Reference Specification mm mm mm mm mm mm mm Tonnes 20010000 530 735 20 Twin / Triple Puller kit, powered by a 20 tonne, self extracting ram with 150mm stroke. Contains straight and cranked legs and 3 extensions for increased reach. 20020000 530 735 50-175 609 156-371 416 20 Heavy duty puller kit. All the features of the 20010000 but also includes; separator, rod assembly, twin beam. 20030000 530 735 50-175 609 156-371 416 20 Heavy duty puller kit. Combines all the features of the 20010000 & 20020000 but includes a portable press frame, ideal for use on commercial vehicle king pins. 11200000 165 457 20 Portable King Pin Press Frame, powered by a 20 tonne ram. Contains a robust press frame, autogrip collar and 3 ram extensions for the quick and safe removal of commercial vehicle king pins. Loadstar Puller kits: Continued 91
Pullers Hydraulic Pullers Reference Specification mm mm mm mm mm mm mm Tonnes 20040000 530 735 30 Heavy Duty Puller Kit, powered by a 30 tonne self retracting ram with a 50mm stroke. Contains straight and cranked legs and 3 extensions for increased reach. Can be used for pulling and pushing applications. 20050000 530 735 50-175 609 160-352 609 75.225 30 Heavy Duty Puller Kit. Combines all the components and features of the 20040000 but includes; internal race extractor for removing bushes, sleeves and bearings from blind housings when the centre shaft has been removed, not allowing the use of a conventional puller. Also includes a twin rod flywheel/ gear pulling option. 20060000 185-521 914 50 Heavy Duty Puller Kit, powered by a 50 tonne self retracting ram with a 100mm stroke. Can be used as a portable jack. Interchangeable heads for increased versatility and includes flywheel / gear puller. Can be used for pushing and pulling options. 20050000 92
Pullers Mechanical Pullers Triple Leg Mechanical Pullers For removing gears, races, bearings and sprockets Double Ended - Reversible 08280000 Reference Specification mm mm 08270000 150 80 Triple Leg Mechanical Puller. Double ended legs for internal and external use 08280000 200 140 As above, but with greater reach Standard Adjustable 08340000 Reference Specification Standard Adjustable mm mm 08290000 300 250 Triple Mechanical Puller Kit with 3 position adjustable legs for increased pulling options 08340000 350 380 As above, but with greater reach 08650000 Reference Specification mm mm 08640000 150 150 Thin Jaw Triple Leg Puller Kit. Thin jaws allow access where clearance is limited 08650000 150 225 As above, but with greater reach. 93
Pullers Mechanical Pullers Twin Leg Mechanical Pullers For removing gears, races, bearings and sprockets Double Ended - Reversible 08310000 Reference Specification Standard Adjustable mm mm 08300000 150 80 Twin Leg Puller Kit with double ended, reversible legs for internal and external applications 08310000 200 140 As above, but with greater reach. 08330000 Reference Specification mm mm 08320000 300 250 Twin Leg Puller Kit with adjustable legs for increased pulling options. 08330000 350 380 As above, but with greater reach. Thin Jaw 08620000 Reference Specification mm mm 08600000 75 75 Thin Jaw, Twin Leg Puller Kit. Thin jaws allow access where clearance is limited 08610000 150 150 As above, but with greater reach 08630000 150 225 As above, but with greater reach 08620000 150 225 As above, but with heavy duty beam 94
Pullers Mechanical Pullers Triple Leg Pullers Fast Fit For rapid removal of small bearings Covers a wide range of automotive applications Self centering force screw with T-bar and 13mm hexagon drive 08215000 Fast Fit Micro Pullers Reference Specification mm mm mm 08215000 45 19 73 Triple Leg Fast Fit Puller. 1 tonne capacity Gold Standard Twin / Triple Leg Mechanical Pullers 2 position adjustable legs for increased pulling options 1 Tonne capacity 08230000 Gold Standard Twin / Triple Leg Puller Reference Specification mm mm 08230000 60 50 Gold Standard Twin / Triple Puller. 2 Position adjustable legs for increased pulling options 95
Pullers Mechanical Pullers Twin / Triple Leg Mechanical Puller Kits Twin and triple beams and double ended legs for a wide range of pulling options 08490300 Double Ended - Reversible Reference Specification mm mm 08270500 150 80 Twin / Triple Leg Puller Kit, with double ended, reversible legs. 4 pullers in 1 08280500 200 140 Twin / Triple Leg Puller Kit, with double ended, reversible legs. 4 pullers in 1 08420000 350 380 Twin / Triple Leg Puller Kit. Contains parts to make 12 mechanical pullers 08490000 200 140 Twin / Triple Leg Puller Kit. Contains parts to make 8 mechanical pullers. In metal box 08490300 200 140 As above, but in promotional box Thin Jaw Thin jaw leg 08650500 Reference Specification mm mm 08650400 150 225 Thin jaw Twin / Triple Puller Kit. Contains parts to make 7 thin jaw pullers 08650500 184 225 Thin jaw Twin / Triple Puller Kit. Contains parts to make 7 thin jaw pullers. On metal storage / display panel 96
Pullers Mechanical Pullers General Purpose Pullers Suit a variety of applications Double Ended - Reversible Reference Specification 66036000 mm mm 66039000 80 90 Twin Leg Puller with double ended legs for increased pulling options 66036000 100 75 Twin / Triple Leg Puller with double ended legs for increased pulling options Internal Extractor Kits Extract components quickly and efficiently when conventional pullers cannot be used Split Collets 09580000 Split Collet Internal Extractor Kits Reference Specification mm 09580100 13 6 Extractor Set 6 13mm. 3 Split collet extractors. Includes slide hammer assembly 09580400 22.5 8 Extractor Set 22.5 8mm. 4 Split collet extractors. Includes slide hammer assembly 09580200 30 13 Extractor Set 30 13mm. 3 Split collet extractors. Includes slide hammer assembly 09580000 60 6 Extractor Set 60 6mm. 9 Split collet extractors. Includes slide hammer assembly 09580300 60-30 Extractor Set 60 30mm. 3 Split collet extractors. Includes slide hammer assembly 97
Pullers Mechanical Pullers 08545000 Combi Pull Puller Kits 16 different puller combinations in one kit Puller / Separator Kits - Mechanical Combined puller / separator kits for a variety of applications 09300500 08490600 Puller / Separator Kits - Mechanical Reference Specification mm mm mm 09300500 75 75 55 Mechanical Separator / Puller Kit, with small capacity separator and thin jaw legs. In promotional box 09400300 140 89 155 Multi Puller Pack. Contains components to make 5 different pullers 08420600 350 380 140 Mechanical Separator / Puller Kit. Contains components to make 12 mechanical pullers and 3 separators. In metal box 08490500 200 140 55 Mechanical Separator / Puller Kit. Contains components to make 9 mechanical pullers and 1 separator. On metal storage / display board. 08490600 200 140 105 Mechanical Separator / Puller Kit. Contains components to make 8 mechanical pullers and 2 separators. In metal box 98
Pullers Mechanical Pullers Internal / External Separator Kits Mechanical With tapered edges for insertion behind close fitting bearings, gears etc 09310000 Puller / Separator Kits - Mechanical Reference Specification mm mm 09300000 55 115 Separator / Puller Set. In metal Case 09310000 105 20 75 Separator / Puller Set. Can be upgraded for internal pulling (use 09350000). In metal box. 09320000 140 35 860 Separator / Puller Set. Can be upgraded for internal pulling (use 09350000). In metal box. 09330000 175-50 760 Separator / Puller Set. Can be upgraded for internal pulling (use 09360000). In metal box. Internal Race Extractors 09350000 150 40 100 Pulling attachment for 09310000 and 09320000 09450000 150 40 100 Mechanical Internal Extractor Kit. 09360000 233-75 100 Pulling attachment for 09330000. NB: When using 09350000 and 09360000 users should also order the correct thread protector to fit their bearing puller:- 09330000 use 09332000 09310000 use 09312000 09320000 use 093220000 Individual Separators For use with Sykes-Pickavant mechanical pullers, hydraulic pullers etc. Separators Reference 09530000 mm 09500000 55 09510000 105 20 09520000 140 35 09530000 175-50 99
Pullers Mechanical Pullers Multipull Blind Housing Bearing Removers Will remove blind housing bearings without the need to dismantle machinery 3 Kits cover a wide array of ISO bearings Multipull Blind Housing Bearing Removers Reference Max. Spread Min. Spread Ball End Dia. Reach mm mm mm mm 09800000 95 20 5.5 8 125 09810000 117 20 5.5 12.5 415 09820000 210 56 16 31.75 490 ISO Bearing Designation 09800000 6004-6010 6299-6205 6300 6302 09810000 6004-6015 6200-6211 6300-6307 6403 6404 09820000 6212-6222 6308-6319 6405-6414 09800000 09810000 09820000 This catalogue displays only a selection of the full Sykes-Pickavant range of pullers and components. For further information, refer to our dedicated Puller Catalogues. To discuss your specific needs, please contact our Technical Helpline on +44 (1) 922 702183 100
Body Repair Tools Forming Tools - Panel Beating Hammers & Mallets Panel Beating Hammers High quality investment cast alloy steel heads with hardened striking surfaces Octagonal hickory shafts, secured with unique double-wedge system wood & steel Selection of faces available, in both round and square formats:- Flat Face Crowned Face Shrinking Face Panel Beating Hammers: Reference Hammer Type Face Type Face (1) Face (2) Weight 05600000 Standard beating Flat Round 41mm Square 38mm 0.425 kg 05610000 Standard beating Crowned Round 41mm Square 38mm 0.425 kg 05680000 Light beating Flat Round 32mm Square 25mm 0.368 kg 05620000 Light beating Crowned Round 32mm Square 25mm 0.368 kg 05290000 Pein & finish Flat Round 41mm Straight pein 0.425 kg 05650000 Pein & finish Crowned Round 41mm Straight pein 0.425 kg 05300000 Pick & finish Flat Round 38mm Pick 0.430 kg 05660000 Pick & finish Crowned Round 38mm Pick 0.430 kg 05690000 Shrinking Shrinking / Flat Round 41mm Square 38mm 0.425 kg 05280000 Shrinking Shrinking x 2 Round 41mm Square 38mm 0.425 kg 05370000 Curved pein Crowned Round 41mm Curved pein 0.425 kg NB. For ease of identification, coloured rings are fitted to the hammer shafts to denote flat or crowned faces Blue = Flat faces (Diag 1) Red = Crowned faces (Diag 2) Black = Shrinking faces (Diag 3) Diag. 1 Diag. 2 Diag. 3 Panel Beating Hammers: 05600000 05290000 05690000 05610000 05650000 05280000 05680000 05300000 05370000 05620000 05660000 101
Body Repair Tools Forming Tools - Panel Beating Hammers & Mallets 05310000 Rubber Faced Mallet Flat & cone shaped inter-changeable heads Ideal for use on aluminium and light gauge steel Replacement heads available 05311100 cone shaped head 05311200 flat shaped head 05320000 Copper / Rawhide Mallet Double-ended mallet, ideal for bodyshop use 1.1 kg weight Forming Tools Dollies & Spoons A range of high quality Craftsman s dollies, for shaping and forming body panels Drop forged from alloy carbon steel, hand ground and polished, and zinc plated Dollies & Spoons: Reference Description Length-mm. Width-mm. Depth-mm. Weight-kg. 05410100 US style pronounced edges 90 55 35 1.15 05420100 US style regular slim dolly 90 65 32 1.05 05430100 Thin curved dolly 125 55 37 0.90 05440100 Radius dolly 140 55 40 0.75 05460100 Pinch wedge dolly 130 68 25 1.15 05480100 Thin toe dolly 115 56 25 0.86 05490100 Anvil dolly 102 72 62 1.40 05500100 Grid toe dolly 120 58 28 1.16 05520100 Utility dolly 76 57 58 1.15 05530100 Thick curved dolly 140 54 55 1.35 05540100 Heel dolly 83 63 36 1.08 05550100 Hatchet dolly 135 62 26 0.84 05560100 Curved head dolly 125 90 70 1.30 05570100 Round head dolly 56 56 56 0.73 05580100 Heavy toe dolly 125 60 30 1.37 102
Body Repair Tools Forming Tools Dollies & Spoons Dollies & Spoons: 05410100 05480100 05540100 05420100 05490100 05550100 05430100 05500100 05560100 05440100 05520100 05570100 05460100 05530100 05580100 A selection of bumping spoons, for roughing and / or prying in the preparation of body panels Can also be used in place of a dolly where access is restricted. Bumping Spoons: Bumping Spoons: Reference Description Length-mm. Width-mm. Weight-kg. 05120000 Heavy duty pry spoon 405 63 1.48 05130000 Long reach dolly spoon 355 64 1.80 05730000 Pry & surfacing spoon 295 40 1.10 05740000 General purpose spoon 295 37 1.10 05780000 Angled surfacing spoon 185 45 1.56 05120000 05730000 05780000 05130000 05740000 103
Body Repair Tools Forming Tools Dollies & Spoons Bumping Tools Curved serrated steel blades, ideal for flattening bumps and dents, and for semi-finishing work on body panels Milled serrated teeth help prevent metal stretch Bumping Tools: Bumping Tools: Reference Description Length-mm. Width-mm. Weight-kg. 05940000 Bumping tool flat blade 350 35 0.72 05950000 Bumping tool half round 350 33 0.68 05940000 05950000 Body Repair Kits 05810300 Body Repair Set Starter Kit General purpose starter kit, supplied in cardboard carton 05820100 Body Repair Set Lightweight Kit Lightweight kit suitable for working on aluminium and light gauge steel Supplied in a steel case 104
Body Repair Tools Body Repair Kits 05800100 Body Repair Set Standard Kit Basic general purpose set of bodyshop tools Supplied in a steel case 05830100 Body Repair Set General Kit Comprehensive general purpose set of bodyshop tools Supplied in a steel case 05840100 Body Repair Set Master Kit Master set of panel beating tools Supplied in a steel case 105
Body Repair Tools Body Repair Kits Body Repair Kit Contents:- Reference Description 05810300 05820100 05800100 05830100 05840100 Number of Tools 6 6 10 13 20 05280000 Panel beater shrinking flat face X X X 05290000 Panel beater - straight pein flat face X 05300000 Panel beater - pick and flat face X 05370000 Panel beater - curved pein crowned X 05600000 Panel beater - standard flat face X X X 05610000 Panel beater - standard crowned face X 05620000 Panel beater - light crowned face X X X 05650000 Panel beater - straight pein crowned X X X 05660000 Panel beater - pick and crowned X 05310000 Rubber faced mallet X X X 05430100 Thin curved dolly X 05480100 Thin toe dolly X 05490100 Anvil dolly X 05500100 Grid toe dolly X X X 05520100 Utility dolly X X X X 05530100 Thick curved dolly X X X X 05570100 Round head dolly X 05580100 Heavy toe dolly X X X X 05120000 Heavy duty pry spoon X 05730000 Pry / surfacing spoon X X X X 05740000 General purpose spoon X X X 05780000 Angled surface spoon X X 05940000 Bumping blade tool flat X X 05960000 Door lock hole reforming tool X 05710000 Adjustable file blade holder X X X NB. Refer to Bodyshop Catalogue for full details of all Body Repair Tools 106
Body Repair Tools Panel Preparation Tools 05270000 Panel Puller Heavy Duty Slide hammer panel puller, with cast-iron hammer slide (1.6kg) Replacement screws available for attaching to panels (05271200) 05960000 Door Lock Hole Reforming Tool Universal tool for both flush-fitting and recessed door lock holes For holes up to 50mm diameter 05250000 Abrasive Holder Wooden bodied tool, with spring loaded quick release clips for securing abrasive strips For use with 70 x 450mm strips, or 70mm wide abrasive rolls 107
Body Repair Tools Panel Preparation Tools 05710000 Adjustable Body Blade Holder Adjustable blade holder, suitable for forming and shaping fillers and metal during body repair work. Made from aluminium with steel adjuster and base plate Supplied with 9tpi. Flat blade Range of blades available:- 04021300 Blade Specification:- Reference Description Tpi. Length - mm 05711100 Standard flat cut 9 356 05711200 Fine flat cut 13 356 05711400 Supercut flat 8 356 05711500 Plasticut flat 6.5 356 Hole Cutters 04001100 Zipcut Spot Weld Remover Adjustable, auto-centering tool for removal of spot welds 5 /16" hex shank for use with drill chucks of 3 /8" capacity Replaceable cutters and pins available:- Spare cutters 04001400 Spare pins (3) 04001500 Spot Weld Drills High speed cobalt steel drills, for removal of spot welds without distortion Range of sizes available:- Spot Weld Drills Specification:- Reference Description Length-mm. Drill Diameter-mm. 04020100 Stubby 80 8 04021100 Jobber 115 8 04021300 Stubby 70 6.5 04022000 Jobber 100 6.5 108
Body Repair Tools Hole Cutters 04080000 Multi-Cut Hole Cutter 5 22mm Self-centering conical hole cutter, for metal, fibreglass and plastics up to 3mm thick 3 /8" diameter shank 5mm 22mm capacity in 1.6mm steps 04090000 Multi-Cut Hole Cutter 11 29mm Self-centering conical hole cutter, for metal, fibreglass and plastics up to 3mm thick 3 /8" diameter shank 11mm 29mm capacity in 1.6mm steps Uni-Cut Hole Cutters Variable hole cutters 3 /8" diameter shank Uni-Cut Hole Cutters:- Reference Capacity mm Length - mm 04100000 6-20 70 04110000 16-30 75 04120000 25-40 80 04300000 Panel Hole Punch 6mm Specialist tool for punching 6mm diameter holes in panels and flanges Shaped head to fit over gutters, wheel arches etc 109
Body Repair Tools Sheet Metal Cutting & Folding Sheet Metal Tin Snips Drop forged high quality steel for strength and precision Sheet Metal Tin Snips:- Reference Description Cut Length-mm. Overall Length-mm 06010000 Straight cut 50 200 06020000 Straight cut 70 250 06030000 Straight cut 70 300 06050000 Cranked RH 50 300 06080000 Compound 40 240 Sheet Metal Tin Snips:- 06010000 06030000 06080000 06020000 06050000 Sheet Metal Cutters Reversible ratchet-action roller cutters, for straight, curved and angle cutting on mild sheet steel Include safety shear pin to prevent damage from overloading 04200000 Lightweight Sheet Metal Cutter 1.6mm capacity Bench Mounted Optional vice mounting block available (04200100) Replacement cutter wheels available (04200200) 04210000 Heavy Duty Sheet Metal Cutter 3.2mm capacity Bench Mounted Supplied with bench mounting bracket Replacement cutter wheels available (04210200) 110
Body Repair Tools Sheet Metal Cutting & Folding Sheet Metal Folders Produce up to 100 folds, for fabrication of box and channel sections Spring assisted clamping blades for ease of operation 04220000 Sheet Metal Folder, Bench Model 600mm capacity Vice mounted folder, for mild steel up to 1.2mm thick, and 610mm wide Supplied with protractor for accurate fold angles 04330000 Sheet Metal Folder, Bench Model 600mm capacity Floor mounted folder, for mild steel up to 1.2mm thick, and 1 metre wide Floor stand can be bolted down for added safety 75mm 75mm Box Section Min. Size 75mm 50mm Channel Section Min. Size 50mm 75mm 115mm 111
Body Repair Tools Flanging Tools ( Jogglers ) 04230000 Rolastep Flanging Tool 17mm Lightweight portable tool recommended for adhesive panel bonding For producing a continuous stepped flange (17mm wide) Twin drive rollers can be adjusted for metal thickness, to avoid distortion Simple to use with spanner, socket etc., to produce continuous stepped lap joint For use on sheet metal up to 1.2mm thick 04240000 Rolastep Flanging Tool 12mm Specification as per model 04230000, but produces a continuous 12mm lap joint 04250000 Hand Edge Setter / Flanging Tool Hand operated tool, to produce a stepped edge on sheet metal up to 1.2mm thick 20mm wide jaw on specially designed head, produces stepped lap joints quickly with the minimum of effort 04310000 Door Skin Crimping Tool Hand held tool for crimping and bending flanges when replacing door skins and panels Replaceable nylon pads prevent damage to doors when crimping Replacement pads available:- 32mm wide 04310100 50mm wide 04310200 112
Body Repair Tools Welding Clamps 06500800 Sheet Metal Clamp Wide jaw locking clamp for holding sheet steel and body panels Jaw width 75mm 06501200 Deep Throat Welding Clamp Split jaw locking clamp, gives maximum access to working area Jaw width 75mm 06501100 C Clamp Large capacity deep throat clamp, with small gripping area, for awkward shapes and access Jaw opening width 90mm. Jaws closed width up to 150mm. Depth 55mm 06501400 C Clamp Extra large capacity deep throat clamp Jaw opening width 300mm. Jaws closed width up to 405mm. Depth 250mm 113
Body Repair Tools Welding Clamps 06503500 Micro Welding Clamps (2) Compact lightweight aluminium clamps, quick and easy to use Length 100mm, Capacity 20mm 06502000 Axial Grip Welding Clamp L Thin jaw flat axial grip clamp Jaw width 18mm. Jaw capacity 18mm 06502500 Axial Grip Welding Clamp J Restricted access axial grip clamp Jaw width 18mm. Jaw capacity 18mm 06503000 Axial Grip Welding Clamp W Wide jaw flat axial grip clamp Jaw width 56mm. Jaw capacity 18mm 114
Body Repair Tools Door Fitting & Removal Tools 04010100 Impact Driver For use with a medium weight hammer, to loosen stubborn screws and nuts Ideal for removal of door hinge brackets Supplied with a range of inter-changeable bits 04520000 Hinge Pin Remover 10mm Solid Pins 19mm square bar, with 10mm jaw opening Solid pins 04530000 Hinge Pin Remover 7.5mm Solid Pins 16mm square bar, double ended, with 7.5mm jaws Solid pins 04540000 Hinge Pin Remover Hollow Pins 12mm square bar, with 5.5mm jaw opening Supplied with a set of three roll pin removers Roll pin removers:- 04540400 for 3.5mm pins 04540500 for 4.5mm pins 04540600 for 5.5mm pins 04540300 set of all three Optional extra removers:- 04500800 for 5.0mm extra-long pins Hollow pins 04501000 for 4.0mm pins 115
Body Repair Tools Difficult Access Wrenches Double angled, curved wrenches for access to boot, door and bonnet hinges where conventional bits and wrenches are unsuitable. All wrenches are double-ended for maximum applications access Difficult Access Wrenches 66068600 66068800 66069600 66069900 Difficult Access Wrenches:- 66069100 Difficult Access Wrenches Set of 8 Supplied with full vehicle applications chart Contains: Hex: 8mm 12 Point: 10, 12, 13, 16mm Torx: TX40, TX45 XZN Spline: XZN10 Reference Description Size Length-mm 66068600 12 point ring 12mm 280 66068800 12 point ring 13mm 280 66069600 Torx TX45 280 66069800 XZN / spline XZN10 280 66069900 Hex 8mm 280 66069200 Difficult Access Wrenches Set of 4 12 point wrenches (10, 12, 13, 16mm) 13mm 66069300 Difficult Access Wrenches Set of 4 Bit wrenches (TX40, TX45, XZN10, Hex 8mm) TX45 116
Body Repair Tools Trim Fitting & Removal Tools 02385000 Wiper Arm Removal Tool Specially designed mini two-leg puller, for the removal of wiper arms, from both tapered and spline spigots Suitable for 95% of European vehicles, including those with built-in washer nozzles 04580000 Universal Body Trim Tool Multi-application tool, for use on all types of trim and trim clips Suitable for weather strips, door trim, plastic mouldings, motifs, badges, clips etc. 04590000 Trim Pin Removal Tool For removal of trim panels and upholstery Split head design minimises risk of damage to bodywork 04600000 Trim Clip Remover and Plier For quick removal of clips and fasteners Allows trim panels to be un-hooked without risk of breaking or tearing 04560000 Seat Belt Tool For re-fitting of lost or broken retaining stops on seat belt webbing Secures new stops in position Replacement plastic stops available:- Black 04560100 (50 pairs) Grey 04560300 (50 pairs) 05890000 Door Handle Spring Clip Tool For removing spring clips from interior door handles 117
General Workshop Tools Torque Motorq Torque Wrench Range Features include:- Secure locking mechanism to avoid forced adjustment against the lock Extended handle for comfort, and reduced calibration drift 72 tooth Ratchet (ratchet repair kits available) Dual scale - Nm / lbf.ft Chemical resistant lens for clear reading of scale Accurate to + / - 3%, manufactured to ISO6789 standard Supplied with calibration certificate, traceable to National Standards Full after sales service and calibration available Motorq Torque Wrench Specifications:- Reference Sq. Drive Range Nm Range lbf.ft Length Weight 80002000 3 /8" Push-thru 4 20 3 15 210mm 0.40kg 80006000 3 /8" 8 60 6 45 305mm 0.60kg 80010000 3 /8" 20 100 15 74 356mm 0.75kg 80010100 3 /8" 20 100 15 74 356mm 0.75kg 80020000 1 /2" 40 200 30 148 455mm 1.00kg 80030000 1 /2" Push-thru 60 300 44 221 570mm 1.40kg 80033000 1 /2" Push-thru 60 330 44 243 690mm 1.40kg 80039900 3 /4" Push-thru 80 400 59 295 690mm 2.10kg Motorq Heavy Duty Torque Wrench Range Features include:- Break-back type of torque wrench for heavy-duty applications 36 tooth ratchet head with push-thru square drive Graduated scale on handle for easy adjustment Supplied with Calibration Certificate, traceable to National Standards Full after sales service and calibration available Motorq Heavy Duty Torque Wrench Specifications:- Reference Sq. drive Range Nm Range lbf.ft Length Weight 80040000 3 /4" push-thru 150 700 110 516 1090mm 6.00kg 80040200* 3 /4" push-thru 150 700 110 516 1090mm 6.00kg 80050000 3 /4" push-thru 300 1000 221 738 1470mm 7.00kg 80050200* 3 /4" push-thru 300 1000 221 738 1470mm 7.00kg * Supplied with NAMAS / UKAS Calibration Certificate 118
General Workshop Tools Torque Motorq Heavy Duty Torque Wrench Range 80040000 80050000 Motorq Torque Multipliers Features include:- Single stage epicyclic gears, producing a 5 : 1 multiplication ratio Use with conventional torque wrenches for heavy duty applications Supplied with reaction bars, in plastic storage case After sales service available 80065500 Motorq Torque Multipliers Specifications:- Reference Ratio Input Drive Max. Input Output Drive Max. Output Weight 80060000 5 : 1 1 /2" sq.dr. / 32mm hex 340 Nm 3 /4" 1700 Nm 4.3kg 80065500 5 : 1 3 /4" sq.dr. / 36mm hex. 540 Nm 1" 2700 Nm 4.5kg Motorq Angular Torque Gauges 80070000 80075000 80070000 Angular Torque Gauge 1 /2" sq. dr. For turning torqued fasteners through a further angle, as per vehicle manufacturers specifications Oil resistant, non-reflective surface and adjustable reaction arm Supplied with both male and female square drives 80075000 Angular Torque Gauge 3 /4" sq. dr. Specification as per 80070000, with 3 /4" sq. dr. 119
General Workshop Tools Extractors & Splitters 01200000 Stud Setter & Extractor Acentric wheel provides powerful grip, for stud setting or removing rusted and stubborn studs 1 /2" sq.dr drive Capacity 6mm 19mm 01220000 Stud Setter & Extractor Compact high-strength design 19mm hex drive Capacity 6mm 12mm 02100400 Concentric Roller Extractor Set (4) Slimline socket design 1 /2" sq.drive or hex drive Also available individually Concentric Roller Extractor Set Specifications:- Reference Sq.Drive Stud Diameter 66199300 1 /2" sq.drive 6mm 66199500 1 /2" sq.drive 8mm 66199700 1 /2" sq.drive 10mm 66199900 1 /2" sq.drive 12mm 01800000 Fluted Extractor Set For removal of broken studs 6mm 12mm diameter Broken stud is drilled out, and an extractor is used to remove the remains of the stud Set comprising:- 5 x drill bits 10 x drill guides 5 x extractor 01820000 Fluted Extractor Set As per 01800000 5 x extractors only 120
General Workshop Tools Extractors & Splitters 66099000 Screw Extractor Set (5 piece) Spiral screw extractors, 3 19mm 66035000 Mechanical Nut Splitter 25mm Removes seized nuts without damaging threads Hex drive, 25mm nut capacity Replacement cutter available (66035300) 03160000 Hydraulic Nut Splitter 20mm Removes seized nuts without damaging threads Allen Key hex drive, 20mm capacity Replacement cutter available (03161200) 03360000 Hydraulic Nut Splitter 33mm Removes seized nuts without damaging threads Allen Key hex drive, 33mm capacity Replacement cutter available (03361200) 03360400 Hydraulic Nut Splitter Set Contents 03160000 & 03360000 Supplied in metal storage case 121
General Workshop Tools Test Tools 03280000 Tyre Tread Depth Gauge Approved by the VI for MOT Inspections Measures 0 26mm in 1mm increments (inc. 1.6mm) 05920000 Corrosion Assessment Tool Designed by the VI for checking bodywork and structural corrosion Approved by the VI for MOT Inspections 03010000 Inspection Lamp 12v / 24v. Robust hand lamp with strong polycarbonate lens Supplied with universal joint and clamp, 7 metres insulated cable with clips Powered by vehicle battery (12v. or 24v) Replacement bulbs available (03010570 12v box of 10) 03020000 Inspection Lamp 240v Design as per model 03010000 Supplied with 240v 12v transformer to BSEN60950 standard Thermal cut-out and voltage overload protection 67000300 Pick-Up Tool (Claw Type) Handle operated pick-up claw 500mm flexible shaft 122
General Workshop Tools Test Tools 67000500 Pick-Up Tool (Magnetic) Magnetic swivel head 480mm flexible shaft 67000600 Telescopic Pick-Up Tool (Magnetic) Magnetic telescopic extension 03200500 Battery Hydrometer Professional tester for measuring the state of charge in lead acid batteries Measures specific gravity and indicates battery condition with a red / green scale 135mm 490mm length 03200000 Antifreeze Hydrometer Professional tester for measuring the volume percentage of ethylene glycol contained in the cooling system Indicates the lowest temperature (in C) to which the cooling system is protected 03201000 Refractometer Optical prism test technique can be used to test:- Cooling system coolant tests both propylene & ethylene based antifreeze freezing point. Battery acid indicates specific gravity of the electrolyte Screen wash shows the freezing point of screen wash fluid Replacement lens cover available (03201700) 67020000 Antifreeze Tester Simple tester giving an instant read-out of coolant temperature protection range Indicates the % strength of ethylene based antifreeze present 123
General Workshop Tools Miscellaneous Workshop Tools Thread Restorers For repairing damaged threads where a conventional die cannot be used Each restorer provides eight pitch sizes of thread form Thread Restorers Specifications:- 02760000 Air Blow Gun Reference Thread Form Pitch Sizes 01560000 BSW / BSF 11, 12, 14, 16, 18, 20, 22, 26 01560100 SAE / UNF 12, 13, 14, 16, 18, 20, 24, 28 01560200 Metric 0.75, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, 3.00 01560300 BSP 11, 12, 14, 16, 19, 20, 22, 28 Fingertip control provides infinitely variable airflow 100mm high velocity cranked nozzle 1 /4" BSP thread connection 02830000 Universal Circlip Tool T Bar handle with screw action for precise control Use for internal & external applications Supplied with 4 pairs of inter-changeable tips (also available individually) 02831200 tips 2.29mm diameter 02831300 tips 3mm diameter 02831400 tips 3.81mm diameter 02831500 tips 4.32mm diameter 03270000 Accelerator Pedal Depressor Holds the accelerator pedal in precise position for constant engine speed Progressive trigger action for increasing engine speed Ideal for one-man operations 124
General Workshop Tools Miscellaneous Workshop Tools 03210000 Fuse Installer & Remover Simple tool for use in difficult access situations Ideal for use with modern blade type fuses 66093500 Wire Brush 4 Row Wooden handle with hardened and tempered steel wire 66095000 Oil Can with Flexible Spout Force feed oil can with spring trigger return 500cc capacity with removable flexible spout 67004000 Grease Gun Pistol-grip piston type operation for single handed use Supplied with hydraulic connector and rigid delivery tube 67005000 Grease Gun Accessory Set Contents:- 300mm flexible spout 150mm cranked rigid spout For use with 67004000, or any alternative with 1 /8" BSP thread 125
General Workshop Tools Miscellaneous Workshop Tools 67008000 Circuit Tester 6 24v tester c/w 750mm lead 67036000 Ear Defenders Lightweight ear-defenders, with flexible headband and padded ear cups Tested to EN352 (part 1) Ideal for bodyshops, dynamic testing etc. 30070200 Computer / Memory Saver Provides connection to an independent 12v supply, allowing the vehicles battery to be disconnected without losing pre-programmed settings 70093000 Soldering Iron 12volt Supplied with battery connection clips and 4.5metres of cable 32370000 Sonoscope A super-sensitive sound detector, for locating noises caused by wear or damage Built-in diaphragm amplifies sounds 126
Support Products & Services OEM Our OEM team specialise in manufacturing bespoke workshop solutions for:- Land, sea and air vehicle and system manufacturers Vehicle importers Field service operations Government agencies We pride ourselves on the high quality and cost effectiveness of our products, but more importantly, we are able to move with the times and provide our customer base with the services to manufacture the high quality products they need to maintain today's highly sophisticated motor vehicles. If you do not see a solution to your requirements then please do not hesitate to call us on: +44 (0)1922 702000 Design & Build 127
Support Products & Services Training Sykes-Pickavant training courses - data - helplines In response to the ever increasing complexity of vehicle and tool technology, Sykes-Pickavant are proud to introduce a complete range of Training Courses, specifically designed to help motor mechanics stay in tune with the latest in modern motor engineering... Page Training courses* 129-134 SP Solutions-Provider 135-138 SPtech 139 Technical bulletins 140 Technical helplines 140 Technical data 141 Product technical support: +44(0)1922 702183 Sales: +44(0)1922 702200 Training enquiries: +44(0)1922 702057 Vehicle specific helpline: +44(0)8702 407439 Websites: www.sptools.co.uk and www.spsupport.co.uk SPtech courses have been given QAA status by The Institute of the Motor Industry. IMI certifi cates are available on request SPtech waveforms SPtech training SPtech SPtech diagnostic data SPtech workshop *Sykes-Pickavant can now offer you the following training courses. The courses outlined on pages 1-6 have a duration of one day. The courses are held at our purpose built training site which is situated in Cannock in the West Midlands, England (10 minutes from Junction 12 on the M6). All courses include lunch and refreshments during the day. If you do not see a course to suit you then give our training team a call and they would be happy to discuss your needs. 128
Support Products & Services Training CODE READER DIAGNOSTICS COURSE Serial port diagnostic techniques Course duration: 7+ hours This course is suitable for any auto mechanic or auto electrician who wishes to learn more about the basic diagnostic procedures using a code reader. The course teaches an understanding of fault codes and data stream analysis on modern engine management systems. The content is approximately 50% theory and 50% practical. Topics covered: Introduction to serial data testing The use of a code reader for basic electric/ electronic systems diagnosis The use of serial data in the diagnosis of fuel injection/ignition faults The use of a code reader for testing the function of actuators Using serial communication to obtain fault codes and clear fault codes Other equipment that can and should be used in conjunction with a code reader Engine management component descriptions 129
Support Products & Services Training ELECTRICAL AND ELECTRONIC DIAGNOSTICS First stage electrical diagnosis Course duration: 7+ hours This course is suitable for any automotive technician who has had little or no experience in electrical diagnostics but who can no longer avoid the subject. This course teaches an understanding of the principles of electricity, quickly moving on to tie this knowledge in to the real world of automotive electrical diagnosis. The course is designed to be as practical in approach as is possible with this subject. The content is approximately 50% theory and 50% practical. Topics covered: Introduction to electricity. What is it and its properties? Types of circuit Relays Multimeters, test lamps and circuit testers and their use Which tool when? Fault finding techniques for basic and more advanced circuits The use and understanding of wiring diagrams And to finish, a brief introduction to electronics 130
Support Products & Services Training DIESEL COURSES Electronically controlled diesel systems Course duration: 7+ hours This course is suitable for any auto mechanic or auto electrician who wishes to learn more about basic diagnostic procedures on modern diesel systems using SP equipment. The course teaches an understanding of modern diesel systems and any known problem areas. The content is approximately 50% theory and 50% practical. Topic covered: General systems overview: Conventional systems through to modern systems Basic mechanical checks: Compression tests, vacuum checks, valve/pump timing Vehicle system checks: Fuel pipes, cooling system, wiring loom, battery checks Injection system and control system checks: Scopes, meters, ACR4, pressure tests Enforcement: Demonstration and practical exercise 131
Support Products & Services Training HOW TO GET THE BEST FROM YOUR SMART SMART training course Course duration: 7+ hours This course is designed for SMART system tester owners and two places on this one day course are included in the price of the unit. The course starts with an introduction to the capabilities of the SMART unit quickly moving on to the relevance of the SMARTS functions in the real world. The course includes some basic vehicle system knowledge to allow the candidate to, not only use the SMART. but also to understand what it is telling them. The content is approximately 50% theory and 50% practical. Topics covered: A description of the SMART and its capabilities Detailing the requirement for integrated equipment Choosing a diagnostic approach The SMART functions in depth Multi-tasking with the SMART The scope in depth Practical tasks and demonstrations 132
Support Products & Services Training AIR BAG DIAGNOSTICS COURSE SRS diagnostic techniques Course duration: 7+ hours This course is suitable for any auto mechanic, electrician and body shop technicians who wish to learn more about the basic diagnostic and health and safety procedures used when working on SRS systems. The course teaches an understanding of the basic systems currently in use including terminology and component operating principles. The content is approximately 50% theory and 50% practical. Topics covered: Introduction to serial data testing for SRS systems SRS terminology System layouts Using serial communication to obtain fault codes and clear fault codes Other equipment that can and should be used in conjunction with a code reader Programming and configuring SRS systems The do s and don t of SRS systems Information sources 133
Support Products & Services Training ADVANCED ELECTRONIC DIAGNOSTICS Oscilloscope and parallel signal training Course duration: 7+ hours A course designed for more advanced technicians who wish to access the benefi ts of an oscilloscope and other sophisticated test procedures. The course starts with an introduction to the operating principles of common vehicle sensors and actuators then moves on to the testing of these components using a scope. The content is approximately 50% theory and 50% practical. Topics covered: Why use a scope? The scope in depth What pattern when? Verifying a diagnostic conclusion Practical tasks and demonstrations Gas analysis 134
Support Products & Services Training WHAT ABOUT THE REST OF THE CAR? Suspension Braking Bearings A method or thought process that if followed will result in large tangible savings, whilst generating additional chargeable work Suspension Braking Bearings All these areas offer excellent opportunities for the service and repair garage. We have devised a training program that enables the mechanic to diagnose faults in these mechanical systems very quickly and simply. This when used with our dedicated tools allows for signifi cant reductions in time spent on diagnosis and repair. The training is sold in modules that consist of: Option 1: Training Option 2: Training and tools Option 3: Training, tools, vehicle specific, manuals and technical support The training is best delivered at the garage premises, on scheduled work, but could be delivered at our training centre in Cannock. When followed correctly the programs can lead to: Increased productivity and profit opportunity Increase in component sales Improving and maintaining the skills level of staff Improved quality of service and client satisfaction The training modules available are: Diagnostics, maintenance and assembly of braking systems Diagnostics, maintenance and assembly of wheel bearings Diagnostics, maintenance and assembly of suspension systems Using Solutions-Provider can signifi cantly reduce repair times. For example, using our methods, it is possible to replace both front strut inserts on a Citroën AX from a book time of nearly 3 hours to a Solution Provider time of 40 minutes. In partnership with 135
Support Products & Services Training SUSPENSION Suspension damper systems Course duration: 2 to 3 Days (delivered on customer s premises) This course is designed to be delivered to all workshop and customer facing staff including workshop control. The course starts with an introduction to the Solutions-Provider methods and concepts moving on to the technology and designs of modern suspension systems. This includes a how to sell section to enable the identifi ed system faults to be turned into revenue. The course is predominantly practical based utilising vehicles from the workshops daily work load. The use of special tools and manuals are fully explained and demonstrated on live practical exercises. Topic covered by course: Suspension component construction and operation Consequences of component wear Health and safety issues when working on suspension systems Developing customer trust and loyalty Understanding your customers questions and explanations Talking your customers language Consolidation of knowledge for customer facing staff Selling the parts and labour to the customer Special tools, use and application Manuals, use and application 136
Support Products & Services Training BRAKING Diagnostic, maintenance and sssembly of braking systems Course duration: 2 to 3 Days (delivered on customer s premises) This course is designed to be delivered to all workshop and customer facing staff including workshop control. The course starts with a general overview of braking systems moving on to the required diagnostic routines required to perform fast and effective diagnostic checks. System specifi c information for removal, refi tting, adjusting and servicing are covered with video and paper based information. All practical exercises are performed on vehicles chosen from the workshops daily work load. Topic covered by course: Braking systems overview Diagnosing for hydraulic failures Diagnosing for mechanical failures Understanding customer terminology Talking the customers language Organising working area Requirements for service/adjustment Practical exercises 137
Support Products & Services Training BEARING Diagnostic, maintenance and assembly of wheel bearing systems Course duration: 1 to 2 Days (delivered on customer s premises) This course is designed to be delivered to all workshop and customer facing staff including workshop control. The course starts with an overview of the variations in bearing design and the cause of their failure. The diagnostic routines required are explained and demonstrated in detail on vehicles from the workshops daily workload. Topics covered by course: General systems overview: Cause of failure Design and fixing variations explained Diagnostic routines explained Selling the additional work to your customer 138
Support Products & Services Training SUPPORT PRODUCTS CD-Rom based garage information product SPtech workshop is a CD-ROM based garage information product. Sykes-Pickavant have produced an easy to use and regularly updated information system. The package includes three CD s that are updated 4 times a year. CD 1 carries the system software, search engine and vehicle listings as well as manufacturer generated adjustment data which includes: Engine Data Fuel system data Cooling system data Engine electric data Vehicle electric data Resistances Wheel and suspension data Torque settings Emissions Belt Lighting CD 2 contains the vehicle specifi c workshop manuals, complete with drawings and instructions. Areas that are covered include: Service reset Engine locking (timing belts and chains) Filters Draining and filling SPtech workshop Error coding Air bag systems Methods of identification CD 3 operates as a stand alone system and is included in this package as a special introductory offer. It is the SPtech branded version of the well known Glass s ICME information disc. This disc contains the all important service and repair times data as well as manufacturer specifi c recall data. This data is specifi c to the UK market. 139
Support Products & Services Training HELP AND SUPPORT At Sykes-Pickavant we realise that having the right tools is only half the battle. You also need knowledge and know-how. Recognising this requirement Sykes-Pickavant not only have a product support helpline but can now offer a vehicle specific support line. THE TECHNICAL HELPLINE SERVICE FORMS A STRATEGIC PART OF THE TECHNICIAN S DIAGNOSTIC AND MAINTENANCE PROCESS. THE SYKES-PICKAVANT AUTOMOTIVE HELPLINE OPERATORS FUNCTION AS INTERACTIVE PARTNERS WITH THE TECHNICIAN WHO THEN BENEFITS FROM THE ADVICE, THE EXPERTISE AND THE DATA THAT TOGETHER CREATE AN IMMEDIATE RESPONSE SERVICE. The modern technician can no longer be master of all technologies and all vehicles. Although information systems and manuals provide valuable data and support, having access to the additional expertise and data available from a live helpline service enables the technician to complete diagnostic tasks much quicker and more productively. Additionally, many known problems and solutions are already compiled on the Sykes-Pickavant helpline system, which is continuously updated. The result is a reduction in time for diagnosis and rectifi cation. Sykes-Pickavant automotive help line operators are highly experienced and qualifi ed personnel with specialist knowledge that collectively embraces virtually all vehicle systems. As well as a conventional library of data and information, further data and information is also available from our database of compiled problems and solutions. We can also supply you with monthly technical bulletins. These bulletins cover the most frequently asked questions from the helpline as well as new system overviews and vehicle specifi c common faults. Part no. Telephone help 30095000 Part no. Technical bulletins 140
Support Products & Services Training TECHNICAL DATA AND INFORMATION Autodata / CAPS / Support Services It does not matter who you are or how good you are, the man with the book (or CD) is the expert Vehicle specifi c data is vital in our industry. It often seems that with every new model there is a new method of doing something and with every new method there is a requirement for new data. At Sykes-Pickavant we can offer various systems for obtaining data and information. Books by Autodata: A well-known and trusted source of information for the automotive professional. Includes a wide range of regularly-updated books and databases covering the majority of vehicles in Europe both cars and light commercials. Topics include: engine diagnostics; testing and tuning; servicing and repair times; carburettor and fuel injection engine management; electronic ignition; diesel injection; auto electrics; MOT testing; body repairs; geometry and tyre pressures. 04-1200 Diesel Data 2004: Contains the required information for servicing, tuning, service reset, pump timing and general engine parameters. 04-2600 Diagnostic Trouble Codes: Currently the best book available for the definition of trouble codes. A vital addition to any code reader tool kit. 02-4100 Pin Data for ECU's: Ideal addition to any technicians diagnostic tool kit, invaluable when taking parallel readings with a meter, scope or SMART. Contains examples of readings and wave forms. 2400-6/7/8 Engine Management Systems - Triple Pack Volumes 6 / 7 / 8: An excellent series of books giving vehicle and system specific information to enable the technician to test systems and components with confidence and accuracy. A perfect companion to Pin Data for ECU`s. 5200-4 Electrical Component Locations 4 1996 2002: Not all manufacturers put the ECU under the bonnet. Find that component quickly with this publication. If you do not see the Autodata title you require then please refer to our catalogue for a full listing of the Autodata titles CAPS: CAPS (Computer Aided Problem Solving) is a Diagnostic ON-Screen manual for engine management and fuel injection systems CAPS is Vehicle specific, and provides information on:- Wiring diagrams / ECM pin configuration / electrical measurements / test routines / common faults and procedures CAPS is supplied in CD-Rom format, and is available on annual subscription CAPS is updated three times per year Support Services: www.spsupport.com For information regarding the latest Diagnostic Software releases, product technical support, and answers to frequently asked questions. www.sptools.co.uk For further information regarding the full Sykes-Pickavant range of Products and Services including Technical Support, Training, After Sales Services. 141
Support Products & Services After Sales Service After Sales Services Calibration Service To comply with modern Quality standards, and to maintain working accuracy, many workshop tools require calibration at specific intervals. We can offer a full Calibration Service, including the Calibration of:- Torque Products Torque Wrenches / Torque Drivers / Torque Testers Pressure Gauge Assemblies Compression / Fuel Injection / Oil Pressure / Vacuum Diagnostic Equipment Gas Analysers / Multimeters / Digital Testers All Calibrations are conducted on NAMAS certified apparatus, under controlled conditions to National Standards (NAMAS calibrations available on request) Repairs Service Full Workshop repair service is available, covering a wide range of Sykes-Pickavant, Britool and Facom products Brake Bleeders Torque Products Diagnostic Testers Electronic and Pressure Gauges Emissions Testing Equipment (inc CO meters) Hydraulic Puller Rams and Pumps All repairs are covered by a three month parts and labour guarantee. Spare Parts Service A full spare parts service, covering all current, and many historic Sykes-Pickavant products is available via the After Sales Division Contact:- For further information regarding After Sales Services, contact the Service Centre on:- www.sptools/services repairs@tools.co.uk, or phone +44 (0)1922 702055 142
Support Products & Services Additional Support Products The Wheel Published quarterly, The Wheel, is exclusively for the professional auto technician A quarterly newsletter, sent directly to members, with up to date information such as:- New Products and Diagnostic Software releases Technical Advice Clinic Informative Articles on Topical Automotive Issues Training and Support Information Exhibitions and Roadshow Calendar Competitions! Becoming a member is easy just purchase a Sykes-Pickavant product! Complete the enclosed Customer Information Card and return (Freepost) to SP Tools, Facom UK, Walsall Road, Cannock WS11 8JR Alternatively, just send your name and address to the address on the back of this brochure, stating you wish to become a wheel member You will receive a Membership Card with your personal ID number, and be added to our mailing list immediately, and we will send you The Wheel newsletter, new catalogues, special offers etc. For further information, visit www.sptools.co.uk Available in the UK only 143
Clothing Sykes-Pickavant Workshop Clothing SPJACK - SP WORKSHOP JACKET Insulated Workshop Jacket with embroidered Sykes-Pickavant logo. In royal blue / black. SPBODY - SP WORKSHOP BODY WARMER Insulated Workshop Body Warmer with embroidered Sykes-Pickavant logo. In black. SPSHIRT - SP WORKSHOP POLO SHIRT Sykes-Pickavant Workshop Polo Shirt with embroidered Sykes-Pickavant logo. In royal blue / black. 144
Clothing Sykes-Pickavant Workshop Clothing SPWHAT - SP WORKSHOP WOOLLY HAT Sykes-Pickavant Workshop Woolly Hat with embroidered Sykes-Pickavant logo. In black. SPCAP - SP WORKSHOP CAP Sykes-Pickavant Workshop Cap with embroidered Sykes-Pickavant logo. In black. 145