Product range overview MultiColor lights Versa Inside MultiColor Pages 2-3 LED S-Mitter MultiColor Pages 4-5 LED Tri-Mitter MultiColor Pages 6-7 LED Ballasts + leads 24 Volt Page 8-10 LED
Linear lights LED lights Versa Inside MultiColor Product benefits High-output luminaire with adjustable change of colour Lead on both sides (one cut, two lights) Product features Flexible, self-adhesive, can be cut to length Colour adjustment with radio remote control S-Mitter MultiColor, Tri-Mitter MultiColor or wired remote control ColorMatic Avanti Can be expanded with a repeater for synchronous operation and control of any number of lights Examples of use Furniture edges, plinths, panels, shelves Can be combined with ChannelLine profiles Ordering information LED ballasts must be ordered separately Tri-Mitter MultiColor Set consists of receivers, radio transmitters and drilling ring Technical details in brief Lamp type: LED surfacemounted light Type of lighting: Accent lighting Operating voltage: 24 Volt DC Life span: 30,000 hours at 70 % Power consumption: max. 72 W (14.4 W per m) Number of LEDs: 6 per 100 m Beam angle: 70 and symbols: c 3 MM Protection rating: IP 20 Supply lead: per 1700 mm Plug connection: LED MultiColor Plug connection Connection to: LED ballast and LED colour controller Versa Inside MultiColor 5000 mm 55 659 01 1 each Accessories (other accessories can be found in the light catalog) S-Mitter remote control MultiColor (max. 72 W) 30 918 05 each S-Mitter receiver MultiColor (max. 72 W) 30 923 05 each Colour controller ColorMatic Avanti max. (2 x 72 W) 30 725 13 each Tri-Mitter MultiColor (max. 72 W) 30 268 01 1 set Repeater MultiColor (max. 72 W) 30 263 03 1 each Direct connector 90 36 311 04 10 each Flexible connector 100 mm 36 312 04 10 each Feeder 1700 mm for sections 36 313 04 1 each LED ballast 75 W with flat Euro plug 30 224 02 1 each MultiColor extension lead 1800 mm 36 770 21 1 each MultiColor 6-way distributor 2000 mm 36 122 11 1 each 2
12V DC Linear lights LED lights Versa Inside MultiColor Dimensional drawing / Assembly 5000 1 2 3 100 10 Recommended product combination ColorMatic Avanti 16 1700 16 55 100 178 150 S Recommended product combination (S-Mitter MultiColor / Repeater) S-Mitter Tri-Mitter syncro Repeater max 72W 3
Switch systems S-Mitter MultiColor Product benefits Wireless design remote control for MultiColor lights For impressive lighting effects in furniture Product features Continuous colour change and individually selectable colour Automatic colour flow with selectable speed Memory for up to 4 light scenes Can be expanded with a repeater for synchronous operation and control of any number of lights Examples of use Furniture with colour effects Furniture with white surfaces (recommended for optimal colour receptivity) Ordering information Can only be used with LED ballasts with no minimum load 1 receiver can be combined with a maximum of 5 remote controls Technical details in brief Can be used with: LED lights Surface finish: Aluminium look Plug connection IN: LED mini MP2 Plug connection OUT: M1 / M2 Switching voltage: 24 Volt DC Max. switching capacity: 72 W and symbols: c MM3 Supply lead: 150 mm Switching lead: 160 mm S-Mitter MultiColor S-Mitter remote control MultiColor (max. 72 W) 30 918 05 1 each S-Mitter receiver MultiColor (max. 72 W) 30 923 05 1 each Repeater Repeater MultiColor (max.72 W) 30 263 03 1 set Accessories MultiColor extension lead 1800 mm 36 770 21 1 each MultiColor 3-way distributor 36 800 21 1 each MultiColor 6-way distributor 2000 mm 36 122 11 1 each 4
Switch systems S-Mitter MultiColor Dimensional drawing / Assembly Tri-Mitter MultiWhite 16,5 45 90 167 160 ON - OFF 184 4x 28 21,5 Recommended product combination (S-Mitter MultiColor / Versa MultiColor) S-Mitter 5
Switch systems Tri-Mitter MultiColor / Repeater Product benefits Wireless design switch for MultiColor lights Continuous Colour change For impressive lighting effects in furniture Product features Tri-Mitter with master ON/-Off button Tri-Mitter with dimming function Can be expanded with a repeater for synchronous operation and control of any number of lights Ordering information Can only be used with LED ballasts with no minimum load Set consists oftri-mitter receiver, Tri-Mitter hand-held radio transmitters and drill-hole mounting ring Technical details in brief Can be used with: LED lights Surface finish: Aluminium look Plug connection IN: LED mini MP2 Plug connection OUT: M1 / M2 Switching voltage: 24 Volt DC Max. switching capacity: 72 W and symbols: c MM3 Supply lead: 150 mm Switching lead: 160 mm Standby Tri-Mitter: 0.3 W Tri-Mitter Tri-Mitter MultiWhite wireless switching set 24 Volt DC 30 268 01 1 set Repeater Repeater MultiWhite (max. 36 W) 30 263 03 1 set Accessories MultiColor extension lead 1800 mm 36 770 21 1 each MultiColor 3-way distributor 36 800 21 1 each MultiColor 6-way distributor 2000 mm 36 122 11 1 each 6
syncro syncro Switch systems Tri-Mitter MultiColor / Repeater Dimensional drawing / Assembly Tri-Mitter MultiColor ø52 16 1,2 12 ø44,5 on - off dim 45 fast slow 160 167 160 ø45 Tri-Mitter max 72W Dimensional drawing / Assembly Repeater 13 250 Eingang syncro 49 blau/blue 24V DC 600 124 250 Tri-Mitter 12V DC Repeater 12V DC Repeater max 36W 7
Ballasts and leads For LED lighting for 24 Volt DC LED ballast 30 W with flat Euro plug Primary: Secondary: Loading capacity: and symbols: 230-240 Volt AC 2000 mm supply lead and flat Euro plug 24 Volt DC 1 x 150 mm supply lead with LED mini plug connection system MP2 Min. 0 W, max. 30 W c MM # 0 s 8 B m LED ballast 30 W with flat Euro plug 30 585 01 1 each 18 blau/blue 57 150 160 2000 LED ballast 75 W with flat Euro plug Primary: Secondary: Loading capacity: and symbols: 230-240 Volt AC 2000 mm supply lead and flat Euro plug 24 Volt DC 1 x 150 mm supply lead with LED mini plug connection system MP2 Min. 0 W, max. 75 W c MM # 0 s 8 B m LED ballast 75 W with flat Euro plug 30 224 02 1 each 30 Ballasts & leads 63 150 200 2000 8
Ballasts and leads For LED lighting for 24 Volt DC LED ballast 150W with Schuko plug Primary: 230-240 Volt AC 2000 mm supply lead and Schuko plug Secondary: 24 Volt DC 1 x 200 mm supply lead with LED mini plug connection system MP2 Loading capacity: Min. 0 W, max. 150 W and symbols: c MM # 0 s 8 B m Note Can be combined with max. 10x LED converter (page 192) LED ballast 150W with Schuko plug 30 017 02 1 each 45 70 blau/blue 200 220 2000 LED MP2 extension lead Voltage: Amperage: Connected load: Length: 24 Volt DC Max. 8 A 192 W 1800 mm LED MP2 extension 36 177 01 1 each 1800 9
Ballasts and leads For LED lighting for 24 Volt DC LED MP2 2-way distributor Voltage: 24 Volt DC Amperage: Max. 8 A. Connected load: 192 W LED MP2 2-way distributor 39 422 51 1 each 15 40 47 29 LED MP2 6-way distributor Voltage: Amperage: Connected load: 24 Volt DC Max. 8 A 192 W 12 LED MP2 6-way distributor 36 996 01 1 each Ballasts & leads 77 55 10