Rental Rates 12520 Quentin Ave. So. Suite 100 Savage, MN 55378 (952) 895-7033 (800) 888-9515 WWW.RMSRENTALS.COM 2012
Rental Terms & Policies 1. Credit - All rentals require a customer to have an open account and are subject to approval by our credit department. 2. Hauling - Customer is responsible for all hauling charges to and from jobsites. 3. Insurance A. Liability: proof of General Liability insurance must be provided to RMS prior to taking possession of equipment. The minimum liability coverage amount is $1,000,000 per occurrence, with RMS named as an additional insured. B. Physical Damage: proof of physical loss insurance is required for the value of each piece of equipment rented. A damage waiver for physical loss can be provided by RMS at an additional cost of 12% of the rental rate. 4. Contract: A rental contract must be signed for each separate order of rental equipment by the customer. In addition, the renter is required to provide complete jobsite information where equipment will be located including the job number and corresponding bond information, if applicable. Renter is responsible to notify RMS of any/all job or location changes of the rented equipment. 5. Rates: Rates shown in this publication do not include sales tax or insurance coverage. Rates are based as follows: Daily - 8 hours Weekly - 40 hours or 5 days 4 Weeks -160 hours for general equipment. Any overtime hours will be prorated at 70% of the normal rental rate. 6. Rental Purchase Option: RMS will apply 100% of all rentals to the established option price, less an interest charge which will be computed at the rate of prime plus 3%. This rate is subject to change. At rental conversion, all non-warrantable repairs and maintenance during the rental period will be added to the conversion price. 7. Repairs & Maintenance: Any damage to the equipment due to abuse or negligence will be charged to the lessee on return of the rental equipment. While the units are in the possession of the lessee, lessee is responsible for normal preventative maintenance, as required by the manufacturer. Such items include oil changes, filter changes, etc. 8. Additional Responsibilities-Lessee: Ensure that equipment is properly secured to transport vehicles. Observe legal weights and dimensions. Authorize transportation provider to sign shipping papers, checkout/in forms and safety checklists. Charges for abnormal tire wear including cuts, abrasions, and punctures. Charges for manuals or keys not returned. Returning machine with full fuel tank or paying for fuel used. Cleaning labor in excess of 2 hours, which would include shoveling of tracks. Additional charges as listed on the rental rate sheet for type of equipment rented. PAGE 2 RMS RENTALS - RENTAL RATES AND TERMS
Lifting & Hoisting Telehandlers Operating G5-19A $215 $645 $1,935 JLG, 5,000# capacity 19 lift height 14,000 G12-55 $444 $1,365 $4,095 JLG, 12,000# capacity 55 lift height 35,100 6042 $275 $825 $2,475 Sky Trak, 6,000# capacity 42 lift height 23,520 8042 $300 $900 $2,700 Sky Trak, 8,000# capacity 42 lift height 25,365 10042 $335 $1,005 $3,015 Sky Trak, 10,000# capacity 42 lift height 26,883 10054 $375 $1,125 $3,375 Sky Trak, 10,000# capacity 54 lift height 27,200 644E-42 $305 $915 $2,745 Lull, 6,000# capacity 42 lift height 25,000 944E-42 $335 $1,005 $3,015 Lull, 9,000# capacity 42 lift height 27,300 1044C-54 $425 $1,275 $3,825 Lull, 10,000# capacity 54 lift height 33,000 Telehandler-Attachments Capacity (lb) MWP-4X116 $50 $125 $250 Haugen 4 X 9 6 Work Platform 2,000 MIJ $50 $125 $250 Haugen Adjustable Jib, fork pockets, 6 9-12 3,000-6,000 Truss Boom $65 $195 $365 JLG Truss Boom Jib, pin on style, 15 2,000 MFE-636 $50 $125 $250 Haugen Fork extension, 72. 2 1/2 x 5 fork MFSB/MSBT $50 $125 $250 Haugen light material bucket, fork pocket or 960 quick tach. 96 wide MFSH-10 $50 $125 $250 Haugen crane hook, fork slots, hook out 24 10,000 from the carriage MSPR-812 $50 $125 $250 Haugen adjustable spreader bar, 8-12 7,000-4,000 Portable Tower Cranes Model Day Week Four WK Lift Capacity (lb) Wk Capacity IGO MA13 $325 $985 $2,995 52.6 Hook height, 72.2 radius 3,968 HD40 $595 $1,795 $5,495 75.5 Hook height, 114.8 radius 8,818 IGO50 $795 $2,595 $7,595 76.1 Hook height, 131 3 radius 8,818 HDT80 $1,095 $3,395 $9,995 112 Hook height, 148 radius 13,223 SL122-J2 $500 $1,500 $4,500 Potain Tandem Axel Dolly, fits HD40/IGO50 8,818 SL122-J3 $750 $2,250 $6,750 Potain Triple Axel Dolly, fits HDT80 13,223 *All cranes are load tested after assembly.transportation, assembly & disassembly are additional. RMS RENTALS - RENTAL RATES AND TERMS PAGE 3
Aerial Work Platforms Boom Lifts Operating 400S $215 $650 $1,865 40 Straight boom, 46 working height 12,650 450A/450AJ $215 $650 $1,865 45 Articulating boom, 51 working height 15,100 600S $295 $795 $2,375 60 Straight boom, 66 working height 22,750 600A/600AJ $295 $795 $2,375 60 Articulating boom, 66 working height 23,050 600SC $385 $1,150 $3,395 60 Straight boom with full crawler Undercarriage 22,500 800S $575 $1,725 $4,750 80 Straight boom, 86 working height 33,200 800A/800AJ $575 $1,725 $4,750 80 Articulating boom, 86 working height 34,300 860SJ $595 $1,785 $4,950 86 Straight boom w/jib, 92 working height 36,400 1250AJP $1,050 $3,150 $9,450 125 Articulating boom w/jib, 131 working height 44,000 1350SJP $1,095 $3,285 $9,855 135 Straight boom w/jib, 141 working height 45,000 Scissor Lifts Weight/ Capacity (lb) 1230ES $85 $195 $425 JLG 12 Electric, narrow profile, mast lift, 1,740/500 18 working height 1930ES $85 $195 $475 JLG 19 Electric, narrow profile, 2,750/500 25 working height 2630ES $125 $295 $695 JLG 26 Electric, narrow profile, 4,750/500-800 31 working height 2646ES $125 $295 $695 JLG 26 Electric, wide stance, 4,770/1,000 31 working height 3246ES $145 $435 $875 JLG 32 Electric, wide stance, 4,770/700-1,000 38 working height Personnel Lifts Model Day Week Four WK Weight/ Capacity (lb) Wk Capacity AWP25 $75 $195 $425 Genie 25 Electric, push around 350 AWP30 $95 $275 $595 Genie 30 Electric, push around 350 AWP40 $135 $350 $735 Genie 40 Electric, push around 300 * 20 x 22 narrow platforms are available upon request Material Lifts Weight/ Capacity (Lb) Wk Capacity SLC18 $70 $195 $425 Genie 2-speed winch, w/fork extensions, 18.6 lift height 307/650 SLC24 $75 $215 $445 Genie 2-speed winch, w/fork extensions, 24 lift height 374/650 GH-3.8 $50 $150 $395 Air powered, 12 6 max height 80/300 GH-5.6 $60 $180 $450 Air powered, 18 4 max height 85/250 PAGE 4 RMS RENTALS - RENTAL RATES AND TERMS
Digging & Loading Compact Excavators Operating PC18MR $175 $525 $1,475 7 1 dig depth, rubber tracks, ROPS 4,090 PC20MR $185 $555 $1,665 7 9 dig depth, rubber tracks, ROPS 4,830 PC27MR $200 $600 $1,800 8 8 dig depth, rubber tracks, ROPS 6,590 PC35MR $235 $695 $2,095 10 5 dig depth, rubber tracks, ROPS 8,245 PC55MR $315 $945 $2,835 12 6 dig depth, rubber tracks, cab 11,110 PC78MR $415 $1,245 $3,735 15 7 dig depth, roadliners, cab, 18,230 PC88MR $465 $1,400 $4,200 15 2 dig depth, road liners, cab 18,558 PC95 $475 $1,425 $4,275 14 7 dig depth, steel tracks, cab 20,635 Note: Catalytic Muffler standard on PC18 and PC20, optional on PC35 Compact Excavator Attachments KMR08HPX $65 $195 $585 Kinshoffer Rotating, rock grapple, fits PC50/60/78 PC-25B $90 $265 $795 Rotobec, Rotating grapple, clam shell, fits PC78 SB152 $80 $240 $720 Atlas Copco, Hydraulic Breaker, fits PC20 SBC410 $100 $300 $900 Atlas Copco Hydraulic Breaker, fits PC35 SB450 $150 $450 $1,350 Atlas Copco Hydraulic Breaker, fits PC78, 88, 95 A/PC78 $65 $195 $575 Allied Plate Compactor, fits PC78, 88, 95 Small Wheel Loaders Operating WL18 $155 $465 $1,395 25 HP, 48 bucket, open ROPS 4,057 WL25 $165 $495 $1,495 33 HP, 48 bucket, heated cab 5,556 WL30 $195 $595 $1,795 48 HP, 54 bucket, heated cab 6,978 *Loaders come standard with universal skid steer mounting bracket Small Wheel Loader Attachments NA $50 $150 $450 IR Grapple Bucket, 72 wide, fits skidloaders & compact loaders NA $45 $135 $405 Pallet forks, fits skid loaders & compact loaders MSB-84/96 $50 $125 $250 Snow bucket, 84 or 96 fits skidloaders & compact loaders SBC410 $100 $300 $900 Hydraulic breaker, 500 lb. class, fits skid loader only 217002MM $100 $300 $900 Sweeper 72 hydraulic angle, fits skidloaders & compact loaders 21084MH $125 $375 $1,125 Sweeper 84 hydraulic angle, fits skidloaders & compact loaders RMS RENTALS - RENTAL RATES AND TERMS PAGE 5
Steel Trench Boxes Trench Shoring C6M420FB $100 $300 $900 4 X 20 flat bottom, 6 wall 24 depth rating 5,703 C6M424FB $120 $360 $1,080 4 X 24 flat bottom, 6 wall, 17 depth rating 6,651 C8M424FB $120 $360 $1,080 4 X 24 flat bottom, 8 wall, 24 depth rating 7,418 C8H828FB $150 $450 $1,350 4 X 28 flat bottom, 8 wall, 23 depth rating 9,521 C3M68SWKE $100 $300 $900 6 X 8 knife edge, 3 wall, 19 depth rating 1,474 C3M610SWKE $125 $375 $1,125 6 X 10 knife edge, 3 wall, 13 depth rating 2,039 C3M612SWKE $135 $405 $1,215 6 X 12 knife edge, 3 wall, 10 depth rating 2,381 C8M624FB $150 $450 $1,350 6 X 24 flat bottom, 8 wall, 24 depth rating 10,032 C3M88KE $100 $250 $600 8 x 8 knife edge, 3 wall, 18 depth rating 1,944 C3M810KE $100 $250 $600 8 X 10 knife edge, 3 wall, 13 depth rating 2,252 C4L812KE $115 $260 $720 8 X 12 knife edge, 4 wall, 10 depth rating 4,791 C3M812FB $115 $260 $720 8 X 12 flat bottom, 3 wall, 10 depth rating 2,566 C4L816FB $165 $500 $1,500 8 X 16 flat bottom, 4 wall, 20 depth rating 6,019 C4L816KE $165 $500 $1,500 8 X 16 knife edge, 4 wall, 20 depth rating 6,019 C6M818KE $185 $555 $1,665 8 X 8 knife edge, 6 wall, 32 depth rating 8,800 C4M820FB $200 $600 $1,800 8 X 20 flat bottom, 4 wall, 20 depth rating 8,880 C6M820FB $200 $600 $1,800 8 X 20 flat bottom, 6 wall, 26 depth rating 9,847 C6M820KE $200 $600 $1,800 8 X 20 knife edge, 6 wall, 26 depth rating 9,847 C6H824KE $240 $720 $2,150 8 X 24 knife edge, 6 wall, 26 depth rating 11,589 C8M824FB $240 $720 $2,150 8 X 24 flat bottom, 8 wall, 25 depth rating 12,742 C8M824KE $240 $720 $2,150 8 X 24 knife edge, 8 wall, 25 depth rating 12,742 C8H828KE $300 $900 $2,700 8 X 28 knife edge, 8 wall, 25 depth rating 16,956 C8M1024KE $300 $900 $2,700 10 X 24 knife edge, 8 wall, 28 depth rating 15,936 C4M1016KE $200 $600 $1,800 10 X 16 knife edge, 4 wall, 21 depth rating 9,141 SPREADER PIPE $20 $55 $250 Set of 4 pipe lengths, available in 3 to 20 lengths C4WT888RC4 $163 $488 $1,465 8 x8 x8 manhole box, 4 wall, 4-sided w/doors 6,169 *Slings and lifting bridles available upon request Guide Frame and Slide Rail Systems, custom designed to satisfy your needs - Call for more information Aluminum Trench Boxes CAP-SAV-8X6 $135 $405 $1,215 8 X 6, flat bottom, 3 wall, 25 depth rating 1,025 CAP-SAV-8X8 $155 $465 $1,395 8 X 8 flat bottom, 3 wall, 21 depth rating 1,305 CAP-SAV-8X10 $165 $495 $1,485 8 X 10 flat bottom, 3 wall, 16 depth rating 1,525 Bedding Boxes, Road Plates CBBS7 $95 $285 $855 7 yard Bedding box, standard 4,953 CBBS9 $115 $345 $1,035 9 yard Bedding box, standard 5,614 CBBS12 $135 $405 $1,215 12 yard Bedding box, standard 6,147 RP8X8 $30 $90 $270 8 X 8 Road plate 2,613 RP8X10 $35 $105 $315 8 X 10 Road plate 3,266 RP8X12 $40 $120 $360 8 X 12 Road plate 3,920 RP8X20 $50 $150 $450 8 X 20 Road plate 8,168 PAGE 6 RMS RENTALS - RENTAL RATES AND TERMS
Compaction Rammers Operating BS50-2 $65 $185 $495 10 x 13 shoe, Rammer 129 BS60-4 $75 $195 $545 11 x 13 shoe, Rammer 154 Vibrating Plates Operating WP1550A/W $65 $185 $495 20 x 23, optional water tank, Plate Compactor 190 BPU2540A $95 $275 $675 16 wide, Reversible Plate Compactor 309 BPU3050A $100 $300 $900 20 wide, Reversible Plate Compactor 366 BPU4045A $132 $400 $1,200 18 wide, 9 HP, Reversible Plate Compactor 679 BPU5545A $160 $480 $1,440 18 wide, 15 HP, Reversible Plate Compactor 715 DPU6555 $190 $570 $1,710 30 wide, Reversible Plate Compactor 988 Rollers Operating RT82-SC $200 $600 $1,800 32 Double Drum Sheepsfoot, Walk Behind 3,247 Roller, remote control, diesel RD12 $145 $435 $1,250 36 Double Smooth Drum Roller, gas 2,500 RD15 $175 $525 $1,575 32 Double Smooth Drum Roller, diesel 3,300 RD27 $225 $675 $2,025 40 Double Smooth Drum Roller, diesel 5,600 SD25D/F $310 $895 $2,680 Volvo 43 Single Smooth Drum Roller w/shell kit, 5,650 diesel SD45D $350 $1,080 $3,240 Volvo 54 Single Smooth Drum Roller, diesel 10,600 SD45D/F $395 $1,190 $3,520 Volvo 54 Single Smooth Drum Roller w/shell kit, 11,350 diesel SD54 $225 $675 $2,025 Stone 54 Single Smooth Drum Roller, diesel 6,540 PDB-43 $235 $705 $2,115 Stone 43 Single Padfoot drum roller w/blade, diesel 6,771 PDB-54 $275 $825 $2,500 Stone 54 Single Padfoot drum roller w/blade, diesel 7,275 Concrete/Masonry Concrete Buggies MB-16 $95 $275 $825 Miller 16 Cubic foot, stand-on, gas powered MN-16-LP $120 $360 $1,080 Miller 16 Cubic foot, stand-on, propane powered electric start MB-21 $125 $375 $1,125 Miller 21 Cubic foot, stand-on, gas powered MB-21-LP $150 $450 $1,350 Miller 21 Cubic foot, stand-on, propane powered electric start SC75 $125 $375 $1,125 CanyCom 16 Cubic foot, stand-on, gas powered, rubber track Concrete/Mortar Mixers 65CM NA NA $525 Stone Cement Mixer, 6cu ft., 5hp Honda 95CM NA NA $675 Stone Cement Mixer, 9cu ft., 8hp Honda 655PM NA NA $525 Stone Paddle Mixer, 6cu ft., 5hp Honda 855PM NA NA $660 Stone Paddle Mixer, 8cu ft., 8hp Honda 1285PM NA NA $1,350 Stone Paddle Mixer, 12cu ft., 11hp Honda, gear drive SM1200 NA NA $1,800 Stone Silo Mixer, 12cu ft., 13hp Honda RMS RENTALS - RENTAL RATES AND TERMS PAGE 7
Concrete/Masonry Concrete Vibrators HAG134 $95 $295 $885 ISCKO High cycle gas generator, includes one vibrator shaft w/head GDP5H $95 $295 $885 MultiQuip High cycle gas generator, 11hp Honda, Includes one shaft w/head IRFU 45/57 $75 $225 $675 Wacker electric high cycle vibrator, 110 volt M1000/2000/3000 $55 $165 $495 Wacker electric hand held vibrator, includes shaft w/head PV35A $75 $225 $675 Wacker pole vibrator, 3.5 shaft, 1 3/4 head BP50A $75 $225 $675 Oztec backpack vibrator, includes 10 shaft w/ 1 3/4 head Concrete Saws X50 $45 $135 $405 Soff-Cut handheld, 5 blade, 1 max cut depth X150 $100 $300 $900 Soff-Cut 6 blade, 1 3/16 max cut depth X150D $100 $300 $900 Soff-Cut 6 decorative blade, 1 3/16 max cut depth X750 $150 $450 $1,300 Soff-Cut 8 blade, 1 3/16 max cut depth X2500 $200 $600 $1,800 Soff-Cut 10 blade, 1 1/2 max cut depth GX-4200 $300 $900 $2,700 Soff-Cut 12 or 14 blade, 3 max cut depth X5000 $400 $1,200 $3,600 Soff-Cut highway, 14 blade 4 max cut depth V1000 $125 $375 $1,125 Soff-Cut vacuum, 11hp Honda, 39 gallon capacity BBC157 N/A N/A $750 Clipper masonry tub saw, 14 blade, 1.5hp electric BBL527 N/A N/A $750 Clipper masonry tub saw, 20 blade, 5hp electric HSS14-6.5H $85 $250 $750 Edco hardscape saw, 14 blade, 9hp Honda SK14-9H $65 $195 $585 Edco walk behind saw, 14 blade, 13hp Honda DS18-13H $75 $225 $675 Edco walk behind saw, 18 blade, 13hp Honda C2020 $100 $300 $900 Clipper walk behind saw, 20 blade, 13hp Honda Concrete Buckets 413R $65 $135 $375 Gar-Bro 1/2 yard, with side chute, 16 gate, crane hook, 45 diameter and 38 high 427R $65 $175 $405 Gar-Bro 1 yard, with side chute, 16 gate, crane hook 56 diameter and 46 high 483R $95 $195 $595 Gar-Bro 3 yard, with side chute, 16 gate, crane hook 70 diameter and 59 high GH75-Grout Hog $150 $400 $1,200 3/4 yard, with hose, Hydraulic, fork pockets SGZ20G-Grout Hog $150 $400 $1,200 3/4 yard, with hose, 11hp Honda, fork pockets PAGE 8 RMS RENTALS - RENTAL RATES AND TERMS
Concrete/Masonry Concrete Trowels B424 $85 $245 $525 Bartell 24 walk behind edger, 5hp Honda PT430 $85 $245 $525 Allen 30 walk behind edger, 5hp Honda PT436 $85 $245 $525 Allen 36 walk behind edger, 5hp Honda PT446 $85 $245 $525 Allen 46 walk behind edger, 8hp Honda MP215 $225 $675 $1,895 Allen 6 double ride-on, 27hp Kohler, mechanical CRT48-31V-E $250 $750 $2,250 Wacker 8 double ride-on, 31hp Vanguard, electric steer MSP460 $300 $900 $2,700 Allen 8 double ride-on, 44hp diesel, hydraulic HDX600 $325 $975 $2,925 Allen 8 double ride-on, 44hp diesel, hydraulic HTX44 $325 $975 $2,925 MultiQuip 8 double ride-on, 44hp diesel, hydraulic HD550 $500 $1,500 $4,500 Allen 12 double ride-on, 87hp diesel, hydraulic Concrete Floor Preparation Model Day 5-day/wk Four Wk CPL-8-1.5L $150 $750 $3,000 Edco 8 mini scarifier, 1.5hp, 110 volt, 8 x1/32 @175-250 sq ft hr CPM8-9H $200 $1,000 $4,000 Edco 8 scarifier, 9hp Honda, 190 lbs, 8 x1/8 @350-500 sq ft hr CPM8-5B $200 $1,000 $4.000 Edco 8 scarifier, 5hp electric, 220 volt, 8 x1/8 @350-500 sq ft hr CPU-10FC-20H $300 $1,500 $6,000 Edco 10 scarifier, 20hp Honda, 530 lbs, 10 x1/8 @500-750 sq ft hr TG-7-2L $120 $600 $2,400 Edco 7 turbo grinder, 2hp electric, 130 lbs, 7 x1/16 @400-500 sq ft hr TG7-5.5L $120 $600 $2,400 Edco 7 turbo grinder, 5.5hp Honda, 120 lbs, 7 x1/16 @500-750 sq ft hr TMC-7-2L $120 $600 $2,400 Edco 7 turbo grinder, 2hp gas, 130 lbs, 7 x1/16 @400-500 sq ft hr TG-10 $210 $1,050 $4,200 Edco 10 turbo grinder, 11hp Honda, 180 lbs, 10 x1/16 @400-500 sq ft hr TG-10-5B $210 $1,050 $4,200 Edco 10 turbo grinder, 5hp electric, 208 lbs, 10 x1/16 @400-500 sq ft hr SEC-1.5L $75 $375 $1,500 Edco 10 grinder, single head, 1.5hp electric,11 x1/32 @200-250 sq ft hr 2EC-2B $150 $750 $3,000 Edco 27 grinder, dual head, 1.5hp electric,11 x1/32 @200-2500 sq ft hr 2GC-11H $150 $750 $3,000 Edco 27 grinder, dual head, 11hp Honda, 11 x1/32 @200-250 sq ft hr CD-5 $250 $1,250 $5,000 Edco 5-Head Scabbler, pneumatic, 160cfm, 29 x1/4 @250 sq ft hr TLR-7-11H $275 $1,375 $5,500 Edco traffic line remover, 11hp, 7x700-1000 lineal ft per hr VAC-200 $100 $300 $900 Edco vacuum, twin motors, 9 gallon capacity, 2 hose VAC-250 $125 $375 $1,125 Edco vacuum, triple electric motors, 9 gallon capacity, 3 hose 2000 $600 $1,800 $5,400 Innovatech terminator, LP, ride on floor stripper Concrete Screeds P35A* $85 $245 $750 Wacker single head screed, 10,12,14,16 board, 4-stroke Honda Magic Screed* $100 $300 $900 Allen single head screed, 10,12,14,16 board, battery powered Screed Demon* $150 $300 $900 MBW Dual headed screed, 24 board Truss Screed $12/ft $36/ft $108/ft MBW vibratory alum. truss screed, w/hydr winches, 54 total length available Copperhead $595 $1,595 $4,495 Somero laser screen, walk behind, 10 wide *Indicates Handheld RMS RENTALS - RENTAL RATES AND TERMS PAGE 9
GENERAL EQUIPMENT Generators, Light Plants GV3800A $45 $125 $375 3800 watts, 8hp Honda, 2-125V/20A, 1-125/250V/20A TL GV5600A $55 $165 $495 5600 watts, 11hp Honda, 2-125V/20A, 1-125V/20A, 1-125/250V/30A TL GP6600A $75 $225 $675 6600 watts, 11hp Honda, 2-125V/20A, 1-125V/20A, 1-125/250V/30A TL G25 $145 $495 $1,395 20 kw, diesel powered, trailer mount, 63 db G50 $155 $555 $1,595 42 kw, diesel powered, trailer mount w/brakes, 66 db G70 $225 $695 $1,895 58 kw, diesel powered, trailer mount w/brakes, 66 db G85 $245 $735 $1,995 67 kw, diesel powered, trailer mount w/brakes, 69 db G125 $265 $795 $2,295 98 kw, diesel powered, trailer mount w/brakes, 68 db LTN6L $95 $295 $695 4,000 watt light plant, diesel, sound suppressed, 69 db, 6kw LTW8K $125 $375 $1,125 4,000 watt light plant, diesel, sound suppressed, 67 db, 8kw Note: Rates for above generators and light plants are based on single shift use. Double time (2 shifts) = rate X 1.5, Triple time (3 shifts) = rate X 2 Trailers FT6 $75 $225 $675 Felling 6,000# GVWR, single axel FT7T $75 $225 $675 Felling 8,000# GVWR, single axel FT-10W $85 $255 $765 Felling 9,980# GVWR, tandem axel FT14DE $100 $300 $900 Felling 16,000# GVWR, tandem axel Air Compressor, Portable XAS185JD $95 $285 $795 Atlas Copco 185 CFM, diesel powered, towable XAS300DD $140 $420 $1,260 Atlas Copco 290 CFM, diesel powered, towable XAS375 $167 $500 $1,500 Atlas Copco 375 CFM, diesel powered, towable XAS756 $335 $1,000 $3,000 Atlas Copco 750 CFM, diesel powered, towable Self Dumping Hoppers Capacity (lb) H-200 $60 $155 $295 Galbreath 2 yard, fork pockets 6,000 H-250 $65 $165 $325 Galbreath 2.5 yard, fork pockets 6,000 H-300 $75 $175 $425 Galbreath 3 yard, fork pockets 5,000 H-400 $85 $185 $445 Galbreath, 4 yard, fork pockets 4,000 PAGE 10 RMS RENTALS - RENTAL RATES AND TERMS
GENERAL EQUIPMENT Dewatering Pumps PS2 400/500 $45 $190 $570 Submersible pump, 2 D/C, 53-62 GPM, 110V/23 amp PS3 1500 $70 $210 $630 Submersible pump, 3 D/C, 180 GPM, 110V/23 amp, 1 phase PS4 7503HH $150 $450 $1,350 Submersible pump, 4 D/C, 349 GPM, 220V/25 amp, 3 phase PT 2A $45 $135 $405 Trash pump, 2 D/C, 210 GPM, 5.5hp Honda PT 3A $55 $165 $495 Trash pump, 3 D/C, 400 GPM, 8hp Honda PTS 4V $82 $250 $750 Trash pump, 4 D/C, 705 GPM, 16hp Vanguard PT 6LT $200 $600 $1,800 Trash pump, 6 D/C, 1300 GPM, 32hp Lomdardini diesel Note: Discharge & Suction hose is rented separately Hand Held Tools CFM CP1210 $35 $160 $395 Chicago Pneumatic 40# breaker, 1x4.25 hex 48 CP1230 $45 $180 $425 Chicago Pneumatic 60# breaker, 1-1/8x6 hex 63 CP1240 $50 $200 $475 Chicago Pneumatic 90# breaker, 1x4.25 hex 81 CP4608 $35 $160 $395 Chicago Pneumatic 30# rivet Butster,.890 taper 45 CP4130 $30 $120 $295 Chicago Pneumatic chipping hammer,.680 round 26 CP0032A $65 $260 $595 Chicago Pneumatic 55# rock drill, 7/8x3.25 54 CP0032A $65 $260 $595 Chicago Pneumatic 55# rock drill, 1x4.25 54 CO0069 $75 $295 $645 Chicago Pneumatic 60# gas breaker 1x4.25 64 BH65 $85 $340 $795 Wacker 60# gas breaker, 1-1/8x6 hex EH27 $65 $260 $595 Wacker 60# electric breaker, 1-1/8 hex 115-volt EHB7M $45 $145 $395 Wacker 16# electric hammer drill, SDS max 115-volt EHB11BLM $55 $165 $495 Wacker 25# electric rotary hammer, SDS max 115-volt Industrial Fork Lifts Operating FG25 $120 $360 $1,050 Komatsu 5000# capacity, 15 lift height 8,000 Pavers Pavers Operating 1000 $570 $1,725 $5,175 Driveway paver, hopper style, 8-13 screed 10,000 5000 $695 $2,085 $6,255 Path paver, 5 to 9 heated & vibratory screed 12,000 8510 $850 $2,550 $7,650 Driveway/parking lot paver, 8 to 15 legend screed 17,200 RMS RENTALS - RENTAL RATES AND TERMS PAGE 11
ABOUT RMS RENTALS RMS Rentals was started by Road Machinery & Supplies in 1999 with the goal to be a one-stop shop for customers in the General Construction industry. RMS Rentals is offering a full line of products backed by service and parts support. Our manufacturers products are well known for their high quality and performance, including Lull and Skytrak telehandlers, Komatsu Utility Corporation s (KUC) line of compact construction equipment, Potain self erecting tower cranes as well as Wacker, Cerda, LeeBoy and many more. Under the guidance of Mark Rossi, General Manager, RMS Rentals provides customers with peace of mind. Its parent company, Road Machinery & Supplies Co., has a tradition of stability and a reputation for customer service. This tradition is extended to RMS Rentals. All of the equipment is serviced properly before going out to a customer. In addition, our service technicians are dedicated to the general and light equipment to keep it running on the job. WWW.RMSRENTALS.COM (952) 895-7033 (800) 888-9515