1-800--1 The only economical couplings available to connect (or repair) threaded or unthreaded pipe or tubing of any size f rom 1/ thru including metric sizes and a rare oneof-a-kind size tubing. COMPRESSION COUPLINGS Exclusive Design Features Outer Shell and Bar Washer The unique design provides an equalized pressure seal. Nuts and Bolts comes ready to slip on with electroplated nuts and bolts in place ready to be tightened with a single wrench. Gasket Die-cut tooth design assures low or high pressure seal for both gaseous and liquid materials. Black neoprene is standard gasket, but rubber, white neoprene, high temperature and other gasket materials are available. Inner Sleeve Precision die-cut teeth help apply equal pressure to the entire pipe circumference to attain positive seal plus extra rigidity. Compression s with Gasket Protectors Are Factory Assembled no loose parts Automatically compensate for field installation variations causing exposure of gaskets prevent pinched gaskets at butt connections. Gasket Protectors are of Type 0 stainless steel with interlocking teeth excellent for protection against abrasion and corrosion. For special corrosive application, specify Teflon Gasket Protectors Gasket Protectors provide positive gasket protection against abrasion or corrosion with no adverse effect on pressure capabilities. They prevent gasket wear which occurs when pipe or tubing ends do not butt completely. This gap is often unavoidable and always undetectable. In pressure systems this condition exposes the gasket to the abrasive action of grains, feeds, resins, pellets and other granular material. In vacuum systems, gasket protectors without Protectors can be drawn into the line enough to cause excessive wear and eventual system leaks. In either type system this may result in undesirable contamination of the materials being handled. CS-010- s
1-800--1 The compression pipe coupling is designed for permanent installation in the joining of either plain end, threaded, grooved or a combination of any of these joints. The band type construction holds the entire surface of the joint in uniform compression. s are made of heavy gauge zinc plated steel...prices of aluminum or stainless steel couplings may be quoted on request. Gaskets furnished standard in white or black neoprene...please specify. Gaskets also available in a variety of other materials at a slight extra charge. Condensed Table of Specifications Size 1/ - -7/ OD OD -1/ - OD -1/ - 8-/ OD 9 - OD Shell.0.0.0.0.0 Thickness Sleeve.0.0.0.0.0 Gasket.0.09.09.1.1 COMPRESSION COUPLINGS Tubing or Nom. Tubing Pipe (IPS) Size Pipe (A) Code no. Length (B) of Bolts Size of Bolts /1 x 1-1/ /1 x 1-1/ /1 x 1-1/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ 1/ x 1-/ Weight Each (lbs.)..7 1. 1. 1.9 1.8.0.0.9.0.1.1.0.1.1...7.1.........7.0....9..1...0...1. 1/ PIPE / PIPE 1 TUBING 1 PIPE 1-1/ TUBING 1-1/ PIPE 1-1/ TUBING 1-1/ PIPE 1-/ TUBING TUBING PIPE -1/ TUBING -/1 TUBING -1/ TUBING -1/ TUBING -1/ PIPE -/ TUBING TUBING PIPE -1/ TUBING -1/ TUBING.80 1.00 1.000 1.1 1.0 1.0 1.0 1.00 1.00 1.900 1.900 1.70 1.70.000.000.7.7.7.1.1.187.187.0.0.00.00.87.87.87.70.000.000.000.00.00.00.0.0.0.00.00.00 1/-C /-C 1-C-OD 1-C 1-1/-C-OD 1-1/-C 1-1/-C 1-1/-C-OD 1-1/-C-OD 1-1/-C 1-1/-C 1-/-C-OD 1-/-C-OD -C-OD -C-OD -C -C -C -1/8-C-OD 1-1/8-C-OD -/1-C-OD -/1-C-OD -1/-C-OD -1/-C-OD -1/-C-OD -1/-C-OD -1/-C -1/-C -1/-C -/-C-OD -C-OD -C-OD -C-OD -C -C -C -1/-C-OD -1/-C-OD -1/-C-OD -C -C -C CS-010- s
1-800--1 To Prevent Static Electricity Build-up in Bulk Material Conveying Systems, specify compression s with grounding strips...be sure to state if your requirements call for aluminum or stainless steel strips. Stainless steel grounding strips are standard, aluminum grounding strips or couplings without grounding strips are available at the same price. To Eliminate Gasket Wear, or contamination of material flowing through the system lines, specify couplings with Stainless Steel GASKET PROTECTORS. COMPRESSION COUPLINGS For Tubing and Pipe Tubing or Nom. Tubing Pipe (IPS) Size Pipe (A) 1/ PIPE -/ TUBING TUBING PIPE -1/ TUBING -1/ TUBING 1/ PIPE -/ TUBING TUBING PIPE -1/ TUBING -1/ TUBING -/ TUBING TUBING PIPE 7 TUBING TUBING PIPE 9 TUBING.000.000.000.70.70.000.000.000.00.00.00.0.0.00.00.00.000.000.000.70.70.000.000.000....0.00.00.70.70.... 7.000 7.000 7.000 8. 8. 8. 8. 9.000 9.000 Code no. -1/-C -1/-C -1/-C -/-C-OD -/-C-OD -1/-C -1/-C -1/-C -C -C -C -1/-C-OD -1/-C-OD -C -C -C -1/-C -1/-C -1/-C -/-C-OD -/-C-OD -1/-C -1/-C -1/-C -C -C -C -1/-C-OD -1/-C-OD -1/0C-OD -/-C-OD -/-C-OD -C-OD -C-OD -C-OD -C-OD -C -C -C -C 7-C-OD 7-C-OD 7-C-OD 8-C-OD 8-C-OD 8-C-OD 8-C-OD 8-C 8-C 8-C 8-C 9-C-OD 9-C-OD Length (B) 1 1 of Bolts Size of Bolts Black Weight Gasket* White Gasket* Each (lbs.).7. 7.. 7..7. 7..8. 7.7. 7.0.8. 7.7.. 8.1. 8... 8.1..8 8.8..8 9.0 7.8 9..7 7.0 9. 11.8. 7.8 10. 1. 7.9 10.8 1.7 11.0 1. 18.0.0 11. 1. 18.8.0 1.9 19.9 PIC 01000BFG 01000BFG 01000BFG 0107B 0107B 01000BFG 01000BFG 01000BFG 01000BFG 0100BFG 0100BFG 010B 010B 0100BFG 0100BFG 0100BFG 01000BFG 01000BFG 01000BFG 0107B 0107B 01000BFG 01000BFG 01000BFG 010B 010BFG 010BFG 010B 0100B 0100B 0107B 0107B 01000BFG 01000BFG 01000BFG 01000B 010B 010BFG 010BFG 010B 010700B 010700B 010700B 010800BFG 010800BFG 010800BFG 010800B 0108B 0108B 0108BFG 0108LB 010900B 010900B PIC 01000W 01000WFG 01000FG 0107W 0107W 01000WFG 01000WFG 01000WFG 01000WFG 0100WFG 0100WFG 010W 010W 0100WFG 0100WFG 0100WFG 01000WFG 01000WFG 01000WFG 0107W 0107W 01000WFG 01000WFG 01000WFG 010W 010WFG 010WFG 010W 0100W 0100W 0107W 0107W 01000WFG 01000WFG 01000WFG 01000W 010W 010WFG 010WFG 010W 010700W 010700W 010700W 010800WFG 010800WFG 010800WFG 010800W 0108W 0108W 0108WFG 0108LW 010900W 010900W CS-010- s
1-800--1 To Prevent Static Electricity Build-up in Bulk Material Conveying Systems, specify compression s with grounding strips...be sure to state if your requirements call for aluminum or stainless steel strips. Stainless steel grounding strips are standard, aluminum grounding strips or couplings without grounding strips are available at the same price. To Eliminate Gasket Wear, or contamination of material flowing through the system lines, specify couplings with Stainless Steel GASKET PROTECTORS. COMPRESSION COUPLINGS For Tubing and Pipe Tubing or Nom. Tubing Pipe (IPS) Size Pipe (A) Code no. Length (B) of Bolts Size of Bolts Weight Each (lbs.) 17. 1.8.1 1. 0.. 0.. 0. 18.7. 7,1.9 7...0.0 9..9 8.0. 1.1 7.8 9..7 1.9.9. 9. 8.9..1 8. Black Gasket PIC White Gasket PIC TUBING PIPE 1 TUBING 1 PIPE 1 1 1 18 0 10.70 10.70 10.70 1.000 1.000 1.000 1.70 1.70 1.70 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1 1 1 1 1 1 1 0.000 0.000.000.000.000.000 10-C-OD 10-C-OD 10-C-OD 10-C 10-C 10-C 1-C-OD 1-C-OD 1-C-OD 1-C 1-C 1-C 1-C0OD 1-C-OD 1-C-OD 1-C-OD 1-C-OD 1-C-OD 1-C-OD 1-C-OD 1-C-OD 1-C-OD 1-C-OD 1-C-OD 18-C-OD 18-C-OD 18-C-OD 0-C-OD 0-C-OD -C-OD -C-OD -C-OD -C-OD 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 011000B 011000BFG 011000B 01107B 01107B 01107B 01100B 01100B 01100B 0117B 0117B 0117B 01100B 01100B 01100B 01100B 01100B 01100B 01100B 01100B 01100B 01100B 01100B 01100B 011800B 011800B 011800B 01000B 01000B 0100B 0100B 0100B 0100B 011000W 011000W 011000W 01107W 01107W 01107W 01100W 01100W 01100W 0117W 0117W 0117W 01100W 01100W 01100W 01100W 01100W 01100W 01100W 01100W 01100W 01100W 01100W 01100W 011800W 011800W 011800W 01000W 01000W 0100W 0100W 0100W 0100W CS-010- s
1-800--1 QUICKON II COUPLERS QUICKON II COUPLERS can be installed or removed with a twist of the wrist. No tools or special skills needed. The positive locking system turns easily to seal or to compensate for normal pipe or tubing tolerances. This in-lone coupler is ideal for use where fast takedown and reassembly of lines is essential, reduced coupler weight is desirable, a line or system is frequently modified, wraparound installation is necessary, and where pressure does not exceed 0 psi. QUICKON COUPLERS FEATURES: Super fast installation and takedown...no tools. DUAL QUICKON II COUPLERS One piece construciton...no loose pieces. No special pipe preparation required. Adjusting screw and thick gasket assure positive seal and even compression over the entire joint...will not damage thin wall tubing. Stays closed in spite of expansion, contraction or vibration. Exceptionally lightweight...a quickon weighs 1 1/ lbs. compared to / lbs. for a standard coupling. CS-010-7 s
1-800--1 STAINLESS STEEL STAINLESS STEEL FOR PNEUMATIC OR VACUUM CONVEYING SYSTEMS Quickon II Couplers can be installed or removed with a twist of the wrist. No tools or special skills needed. The positive locking system turns easily to seal or to compensate for normal pipe or tubing tolerances. This in-line Coupler is ideal for use where: Fast takedown and re-assembly of lines is essential, reduced coupler weight is desirable, a line or system is frequently modified, wrap around installation is necessary, and where pressure does not exceed 0 psi. QUICKON COUPLERS QUICKON II COUPLERS Size In. 1.00 1.0 1.70 1.900.000.1.0.7.00.70.87.000.0.00.70.000.0.00.000..0. 8. 9.000 Code 101 11 171 1901 001 11 1 71 01 71 871 001 1 01 71 001 1 01 001 1 001 1 1 8001 81 9001 10001 Weight Each (lbs.).8.0...8.70.71.7.77.80.8.88.97 1.0 1.1 1. 1. 1.0 1. 1. 1.7 1.78 1.8..8.. Food Grade Gasket PIC 0101F 011F 0171F 01901F 0001FFG 011F 01F 071F 001FFG 071F 0871F 0001FFG 01F 001FFG 071F 0001FFG 01F 001FFG 0001FFG 01F 0001FFG 01F 01F 08001FFG 081F 09001F 10001F Standard Quickon II Couplers listed are in length. DUAL QUICKON II COUPLERS Size In..000.00.000. 8. 10.70 1.000 1.70 Code -001-01 -001-001 -1-8001 -81-10001 -1071-1001 -171 Food Grade Gasket PIC 8000F 800F 8000F 8000F 80F 80800F 808F 81000F 8107F 8100F 817F Dual Quickon II Couplers listed are 9-1/ in length. Specifications: All stainless steel construction including band, strike plate, handle screw and yoke. Gasket is abrasionresistant, gum rubber attached to band. Static conducting grounding strip included on request. ORDER by SIZE, CODE NO. AND GASKET Request prices on special sizes not shown. Prices subject to change without notice. CS-010-8 s
1-800--1 The GRIPPER was devised as a quick coupler for dry bulk transport tank tubing. This unique coupling just slides onto the tubing or wraps around it and is tightened by hand in seconds but it provides better support than rubber hose and band clamps. Our exclusive fail-safe clamping action keeps its hold despite expansion, contraction and vibration. The Gripper s positive sealing interlocking gum gaskets allow for tube and pipe variations. And because its made of 100% stainless steel, it will not corrode due to harsh weather or road conditions. Silicone and F.D.A. approved gaskets are available. The GRIPPER Size In.(A) 1.00 1.0 1.70 1.900.000.1.188.0.7.00..70.87.000.1.0.00.70.000.0.00.70.000.0.00..70.0.00..00 8. Code Size In.(A) Code G-100-1 G-10-1 G-170-1 G-1900-1 G-000-1 G-1-1 G-188-1 G-0-1 G-7-1 G-00-1 G--1 G-70-1 G-87-1 G-000-1 G-1-1 G-0-1 G-0-1 G-00-1 G-000-1 G-0-1 G-00-1 G-70-1 G-000-1 G-0-1 -00-1 G--1 G-70-1 G-000-1 G-0-1 G-00-1 G--1 G-00-1 G-8000-1 G-8-1 9.000 10.70 1.000 1.70 Size In.(B).000.1.0.00.70.000.0.00.70.000.0.00..70.0.00. 8. 9.000 10.70 1.000 1.70 G-9000-1 G-10000-1 G-1070-1 G-1000-1 G-170-1 Code G-000- G-1- G-0- G-00- G-70- G-000- G-0- G-00- G-70- G-000- G-0- G-00- G-- G-70- G-000- G-0- G-00- G-- G-8000- G-8- G-9000- G-10000- G-1070- G-1000- G-170- Special sizes available upon request CS-010-9 s
1-800--1 The unique design of the Side-Band Compression coupling gives you vastly improved axial force holding power to connect or repair threaded or unthreaded pipe and tubing. Dual locking side bands grip the pipes and allow higher operating pressures than those normally suggested for standard compression couplings. Especially effective where line vibration is a problem, and on plastic pipe. You get all the positive sealing advantages of the compression coupling in a coupling that can hold its own in fighting end pull. PATENT PENDING Available for 1 1/ thru nominal pipe or tubing sizes including millimeter sizes. Static grounding strips or stainless steel gasket protectors are also available. SIDE BAND COMPRESSION COUPLINGS of Pipe or Tubing Inches.000.7.00.87.00.00.000.00.000. Code -C-0D-SB -C-SB 1/-C-OD-SB 1/-C-SB -C-OD-SB -C-OD-SB -C-SB -C-SB 1/-C-SB 1/-C-SB -C-SB -C-SB 1/-C-SB 1/-C-SB -C-SB -C-SB Wgt. Ea. (Lbs.) 7. 7.7 8.1 8.7 9. 10.1 9.8 10.7 10. 1.9 10.7 1. 11. 1.1 1. 1.0 of Pipe or Tubing Inches. 8. 10.70 1.000 1.70 Code -C-OD-SB -C-OD-SB -C-SB -C-SB 8-C-OD-SB 8-C-OD-SB 8-C-SB 8-C-SB 10-C-OD-SB 10-C-OD-SB 10-C-SB 10-C-SB 1-C-OD-SB 1-C-OD-SB 1-C-SB AS-C-SB Wgt. Ea. (Lbs.) 1. 1. 1. 1.9.8 8.. 9.8 9.. 8.1.0.1 7.0.7 7.9 Note: For Side-Band coupling length - add 8 inches to basic coupling length. WHEN ORDERING - Always give the Code and of the pipe or tube on which coupling will be used. 1. Same price applies for couplings with Red Rubber Gaskets.. Stainless steel or aluminum grounding strips are available at the same price. Contact Chada for prices of couplings with Teflon Gasket protectors. Prices for larger and/or special sizes available on request. CS-010-10 s
1-800--1 Clear look at the material flowing Smooth Straight-Thru interior Air-Tight Seal Sighting section can be furnished in Pyrex A grounding strip, permanently attached, eliminates Fast, easy installation SIGHT GLASSES TUBING OR PIPE INSERTED IN CLEAR ACRYLIC IN FOLLOWING SIZES: Tubing Sizes with Aluminum Ends PART NO. SG 11/-OD-1 SG -OD-1FG SG -OD-11FG SG 1/-OD-1FG SG 1/-OD-1FG SG 1/-OD-11 SG -OD-1FG SG -OD-11FG SG 1/-OD-1 SG 1/-OD-11 SG -OD-1FG SG -OD-11FG SG 1/-OD-1 SG 1/-OD-11 SG -OD-1 SG -OD-11FG SG -OD-11FG SG -IPS SG 1/-IPS OVERALL A 1.70.0.0.00.70.70.0.0.70.70.0.0.70.70.0.0.00 TUBE B 1.00.000.000.0.00.00.000.000.00.00.000.000.00.00.000.000 Pipe Sizes with Steel Ends.00.000.7.87 TUBE I.D. C 1.7 1.87 1.70.1.7.0.87.70.7.0.87.70.7.0.87.70.70.000.00 Pipe Sizes with Aluminum Pipe Ends SG -AP SG 1/-AP.00.000.7.87.000.00 CLEAR ACRYLIC INSERTED IN PIPE IN FOLLOWING SIZES: Pipe Sizes with Steel Ends PART NO. SG -IPSFG SG 1/ -IPS SG -IPSFG SG -IPS SG -IPSFG OVERALL A.00.000.00.. TUBE B.0.70.0.0.00 Material: Aluminum Tubing 01-T and 0-T Sight Glass Cast Acrylic Resin Steel Pipe Schedule 0 Aluminum Pipe Schedule 0 (Available in Schedule & 10) Prices of special sizes and materials including Pyrex sighting section available on request. TUBE I.D. C.000.00.000.000 Pipe Sizes with Aluminum Pipe Ends PART NO. SG -AP SG 1/ -AP SG -APFG SG -AP SG -APFG OVERALL A.00.000.00.. TUBE B.0.70.0.0.00 TUBE I.D. C.000.00.000.000 Prices subject to change without notice. When ordering, please be sure to use the correct part number. Also list tubing or pipe and wall thickness. Prices of special sizes and materials available on request. CS-010-11 s
1-800--1 Part A ADAPTOR - ALUMINUM FEMALE THREAD NPT 1 1/ 1A. 0A. 1/ A. 0A.7 0A 1. 0A.0 0A. 8 80A - Part B Part C COUPLER - ALUMINUM THREAD MALE NPT 1 1/ 1B.7 0B 1.0 1/ B 1. 0B.0 0B.1 0B.0 0B.0 8 80B - QUICK COUPLINGS HOSE CLAMP COUPLER - ALUMINUM 1 1/ 1C 1.0 0C 1. 1/ C 1. 0C. 0C. 0C. 0C 7.0 8 80C - Part D COUPLER - ALUMINUMTHREAD FEMALE NPT 1 1/ 1D.8 0D 1.1 1/ D 1. 0D 1.9 0D.0 0D.1 0D.0 8 80D - Part E HOSE SHANK ADAPTOR - ALUMINUM 1 1/ 1E. 0E.7 1/ E.91 0E 1. 0E. 0E.0 0E. 8 80E - CS-010-1 s
Part F 1-800--1 MALE ADAPTOR - ALUMINUM 1 1/ 1F. 0F. 1/ F.81 0F 1. 0F.0 0F.8 0F.0 8 80F - SECURITY CHAIN Part Lbs C-1.10 Part V DUST CAP - ALUMINUM 1 1/ 1V.7 0V 1.0 1/ V 1.19 0V 1.7 0V. 0V. 0V. 8 80V - Part W DUST CAP - ALUMINUM 1 1/ 1W.7 0W 1.0 1/ W 1.19 0W 1.7 0W. 0W. 0W. 8 80W - WELD PARTS Part AW ADAPTOR - ALUMINUM - SOCKET OR BUTT WELD 1 1/ 1AW.7 0AW.7 1/ AW. 0AW.8 0AW 1. 0AW 1. 0AW.0 8 80AW.0 Part DW COUPLER - ALUMINUM - SOCKET OR BUTT WELD 1 1/ 1DW.87 0DW.91 1/ DW 1.1 0DW.1 0\DW. 0DW.1 0DW.87 8 80DW 8.1 CS-010-1 s
Quick Change Couplers, with easy grip Compression Nut requires no welding or epoxy to assembly your pneumatic conveying systems. 1-800--1 All Couplers and Adapters with Compression Nuts are made of aluminum. They are designed for low pressure conveying systems and field installation, for use with.0 tubing size from 1 1/ inches to inches. Exploded View with Adapter Typical assembly ADAPTER WITH COMPRESSION NUT PART NO. SIZE IN INCHES 1-FC 1 1/ 0-FC -FC 1/ 0-FC COUPLER WITH COMPRESSION NUT COMPRESSION NUT REPLACEMENT PARTS PART NO. SIZE IN INCHES 1-CNUT 1 1/ 0-CNUT -CNUT 1/ 0-CNUT 1-GSKCNUT 1 1/ 0-GSKCNUT -GSKCNUT 1/ 0-GSKCNUT PART NO. SIZE IN INCHES 1-BC 1 1/ 0-BC -BC 1/ 0-BC CS-010-1 s