PRODUCT OUTLINE BORING BAR IDENTIFICATION SYSTEM PRODUCT LINEUP SOLID BARS BORING BARS WITH POSITIVE INSERTS BORING BAR SLEEVES

ODU OUIN 1-72 2-3 IDNIIION SYS ODU INU SOID S 4 5-11 12-37 Z Z- / Z-S / Z-N 14 Z US S-S / -S 18 Z (OIIN / OYIN) ZV 19 DOU-SIDD IO-S / 28 IO-S S-S / S-S 29 SWISS IQ S (IO ) VN-S / VN / VN / VNX-S 30 WIN S W / W 36 S WI OSIIV INSS 38-67 INSS Dynamic ar 38 INSS Dynamic ar 40 / INSS oring ar - eneral urpose 42 D INSS Dynamic ar 44 D INSS oring ar - eneral urpose 48 INSS oring ar - eneral urpose 50 INSS Dynamic ar 51 / INSS Dynamic ar 52 / INSS oring ar - eneral urpose 54 V / V / V INSS Dynamic ar 58 W / W INSS Dynamic ar 64 W / W INSS oring ar - eneral urpose 66 SVS Z- / Z- / Z-S / Z S 68-70 20, 68 70 ONDD UIN ONDIIONS 71-72 1

Z DS INSS N & D Z ar Kyocera s Original Z djust Structure asy adjustment and high precision Z ar minimizes deviation with high rigidity clamping O 1225 for Stable utting and xtended ool ife UNIN Kyocera's Original Z djust Structure OOVIN U-O Overhang ength is djustable eplaceable djustment in DIN SOID ND IS ool reparation ime is educed igh recision utting with igh epeatability IIN Overhang ength S S djustment in is eplaceable asy adjustment and high precision after bar changes due to adjustable overhang lengths. NI hipbreaker Without ead ngle oring Insert ineup hipbreaker with ead ngle N (Without hipbreaker) rooving Insert ineup eneral urpose Short Shank INDX D N Inserts vailable ough dge (eneral urpose) Sharp utting (for inishing) No hipbreaker (for rass and Non-ferrous aterials) ecommended ecommended ore than 0.008" D.O.. D.O.. ess than 0.008" pplicable for Various pplications ow utting orce and nti-chattering New ZV for internal profiling New Z ar lus lineup added 2 800.823.7284 Visit us online at Kyocerarecisionools.com

DYNI icro oring Double-Sided icro-ars ost efficient 2-edge inserts. inimum bore diameter 2.0mm. djustable overhang length. Integral shank is adopted to enable installation to standard sleeves. Sleeves are applicable to various machine manufacturers' specifications. DS INSS oring ack oring rooving ace rooving hreading N & D UNIN 28 28 36 47 14 New Dynamic ar oolholder design through stress analysis: aximum structural thickness for high rigidity. ontrols chattering to achieve stable machining. arge chip pocket: xhibits superior chip evacuation. Dynamic design driven by the latest computer simulation technology nti-chatter Vibration erformance hip vacuation Direction S() etter vacuation by Dual hip low S() Superior hip vacuation (xternal oolant) Inside the Workpiece Dynamic ar ompetitor ompetitor OOVIN U-O DIN SOID ND IS IIN S S <utting onditions> 4415 Vc=500sfm D.O..=0.020" f=0.004ipr S16-S09 321-Y Surface Wall Surface oughness Dynamic ar ompetitor ompetitor a=0.4µm z=2.3µm a=0.6µm z=3.6µm a=3.4µm z=14.0µm <utting onditions> 4415 Vc=700sfm D.O..=0.020" f=0.004ipr 16Q-S09-18 321X(V7020) /D=4 xternal oolant Direction of Vibration easurement NI INDX Oscillatory Waveform In ompetitor and 's products chips remain inside the workpiece, but chips from Dynamic ar are all evacuated from the workpiece. Surface inish omparison 800.823.7284 Visit us online at Kyocerarecisionools.com 3

IDNIIION SYS oring ar Identification System (ound Shank) DS INSS N & D S (with coolant hole) NSI (in) ISO (mm) : 3.50 90 : 4.00 100 : 4.50 110 K : 5.00 125 : 5.50 140 : 6.00 150 N : 6.50 160 : 6.75 170 Q : 7.00 180 arbide : 8.00 200 S : 10.00 250 arbide (with coolant hole) X : Special S : Screw lamp : 80 hombic D : 55 hombic : 70 hombic : 60 riangle V : 35 hombic W : 80 rigon : ight-hand : eft-hand Optional ode : Dynamic ar : xcellent ar (Dynamic ar type) Shank oolholder ength lamping System Insert and of ool Others UNIN NSI (inch) S 08 S 3 3 OOVIN ISO (metric) S 12 S 09 16 U-O Shank Diameter utting dge ngle Insert elief ngle Insert Size in. ore Dia. Q DIN SOID ND IS U Z : 5 ositive : 7 ositive : 11 ositive IIN uidelines for Overhang ength of oring ar (Workpiece aterial 1045) Shank aterial /D xample S S (Dynamic ar) xcellent ar (Dynamic ar) 4.0 S S- 5.5 S- arbide 7.0 () S NI arbide Shank ar Standard Size INDX Short Shank Series Short Shank ypes with length of 1/2 and 2/3 of standard type are available. (1/2 or 2/3 is shown at the end of the description) 2/3 Size 1/2 Size 4 800.823.7284 Visit us online at Kyocerarecisionools.com

ODU INU Solid ars oring pplication Solid ars Shank ype ax. Overhang ength /D in. ore Dia. Ø (mm) oolholder / Sleeve 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 ef. age Z- Solid Z ar 14 /D=~5 Þ Þ Þ Þ Þ Þ Z-S Solid Z ar 15 /D=~5 Þ Þ Þ Þ Þ Þ Þ Þ Þ Z-N Solid Z ar 16 /D=~5 Þ Þ Þ Þ Þ Þ Þ Þ Þ Z-N D Solid Z ar Diamond 16 /D=~5 Þ Þ Þ Þ Þ Solid Double-Sided icro-ars 28 /D=~5 Þ Þ Þ Þ Þ Þ VN-S Swiss IQ ars Solid Þ Þ Þ Þ Þ 30 VN Swiss IQ ars Solid Þ Þ Þ Þ Þ Þ 30 VNX-S 20~ 25 24~ 25 32, 33 Swiss IQ ars Solid Þ Þ Þ Þ Þ Þ 35 34 W win ars Solid Þ Þ Þ Þ Þ 36 pplication DS INSS N & D UNIN Internal rofiling ack oring 36 W win ars Solid Þ Þ Þ Þ Þ 37 37 Double-Sided icro-ars 28 VN Double-Sided icro-ars ZV Z ar 30 19 Solid /D=~5 Þ Þ Solid Þ Þ Solid Þ Þ 24~ 25 32, 33 21~ 25 OOVIN U-O DIN SOID ND IS Usage lassification (Solid ar type: inimum utting Dia. 1mm) Z ar asy djustment & igh recision IIN S S 12 NI INDX SVN Square Shank Straight 32 win ars 36~37 S...SVN Standard ound Shank Swiss IQ ars 33 SVNS 32 30 800.823.7284 Visit us online at Kyocerarecisionools.com 5

ODU INU Dynamic ar (inch) DS pplication Overview oring ar ype Shank ype ax. Overhang ength /D oolant ole in. ore Dia. Ø (in) Yes No 0.240 0.312 0.392 0.413 0.450 0.480 0.512 0.551 0.580 0.630 0.700 oolholder / Sleeve ef. age INSS S-...S- xcellent /D=~5.5 arbide /D=~7.0 Þ Þ Þ Þ Þ (0.600) Þ (0.600) 38 N & D oring / Internal acing S- S()- xcellent /D=~5.5 xcellent /D=~5.5 Þ Þ Þ Þ Þ 40 Þ Þ Þ Þ Þ UNIN S S- xcellent /D=~5.5 Þ 52...SWU()- xcellent /D=~5.5 Þ Þ (0.472) Þ OOVIN oring S...SWU- xcellent /D=~5.5 Þ Þ 64 U-O...SDU- xcellent /D=~5.5 Þ Þ Þ 44 DIN...SDU- arbide /D=~7.0 Þ Þ Þ SOID ND IS...SDQ- xcellent /D=~5.5 Þ Þ Þ 46 IIN opying S S SV()- xcellent /D=~5.5 Þ Þ 60 NI...SVU()- xcellent /D=~5.5 Þ Þ INDX 62 ack oring...svz()- xcellent /D=~5.5 Þ Þ in. ore Dia. Ø is indicated by the figure under depending on the boring bar size. 6 800.823.7284 Visit us online at Kyocerarecisionools.com

ODU INU Dynamic ar (metric) pplication Overview oring ar ype Shank ype ax. Overhang ength /D oolant ole in. ore Dia. Ø (mm) Yes No 5 6 7 8 10 12 13 14 16 18 20 22 23 oolholder / Sleeve ef. age DS S- xcellent /D=~5.5 Þ Þ Þ Þ Þ S S- xcellent /D=~5.5 Þ Þ Þ Þ INSS S S- S- /D=~4.0 Þ Þ Þ Þ arbide /D=~7.0 Þ Þ Þ Þ 38 N & D S- arbide /D=~7.0 Þ Þ Þ Þ Þ UNIN S- xcellent /D=~5.5 Þ Þ Þ Þ Þ S S- /D=~4.0 Þ Þ Þ Þ 40 oring / Internal acing Z ar US S- S...S-Z...S-Z arbide /D=~7.0 Þ Þ Þ Þ /D=~3.0 arbide /D=~5.0 18 OOVIN U-O S- arbide /D=~7.0 S- Þ Þ Þ Þ Þ Þ DIN S- xcellent /D=~5.5 S S- Þ Þ Þ Þ Þ Þ 52 SOID ND IS S S()- /D=~4.0 Þ Þ Þ Þ Þ IIN S- S S- xcellent /D=~5.5 Þ Þ Þ Þ Þ /D=~4.0 Þ Þ Þ Þ 51 S S S SWU()- /D=~4.0 Þ Þ Þ Þ Þ Þ Þ NI S SWU- xcellent /D=~5.5 Þ Þ Þ oring SWU()- xcellent /D=~5.5 Þ Þ Þ Þ Þ 64 INDX SWU- arbide /D=~7.0 Þ Þ Þ SWU()- arbide /D=~7.0 Þ Þ Þ Þ Þ 800.823.7284 Visit us online at Kyocerarecisionools.com 7

ODU INU Dynamic ar (metric) DS pplication Overview oring ar ype Shank ype ax. Overhang ength /D oolant ole in. ore Dia. Ø (mm) Yes No 5 6 7 8 10 12 13 14 16 18 20 22 23 oolholder / Sleeve ef. age SDU- xcellent /D=~5.5 Þ Þ Þ Þ Þ INSS S SDU- /D=~4.0 Þ Þ Þ Þ 44 N & D SDU- SDQ- arbide /D=~7.0 Þ Þ Þ Þ Þ xcellent /D=~5.5 Þ Þ Þ Þ UNIN S SDQ- /D=~4.0 Þ Þ Þ 46 SDQ- arbide /D=~7.0 Þ Þ Þ Þ SV- Þ Þ Þ OOVIN opying xcellent /D=~5.5 SV- Þ Þ S SV- Þ Þ 58 U-O /D=~4.0 S SV- Þ DIN SV()- xcellent /D=~5.5 Þ Þ Þ Þ SOID ND IS S SV()- SV()- /D=~4.0 Þ Þ Þ arbide /D=~7.0 Þ Þ Þ Þ 60 IIN SVU()- xcellent /D=~5.5 Þ Þ Þ S S S SVU()- SVU()- /D=~4.0 Þ Þ arbide /D=~7.0 Þ Þ 62 NI SDZ- S SDZ- xcellent /D=~5.5 Þ Þ Þ Þ Þ /D=~4.0 Þ Þ Þ Þ 47 INDX ack opying SDZ- arbide /D=~7.0 Þ Þ Þ Þ Þ SVZ()- S SVZ()- xcellent /D=~5.5 Þ Þ Þ /D=~4.0 Þ Þ 62 8 800.823.7284 Visit us online at Kyocerarecisionools.com

ODU INU oring ar for eneral urpose pplication Overview oring ar ype Shank ype ax. Overhang ength /D oolant ole in. ore Dia. Ø (in) Yes No 0.240 0.312 0.392 0.415 0.472 0.480 0.512 0.564 0.600 0.630 0.700 oolholder / Sleeve ef. age DS S...SU() /D=~3.0 Þ Þ (0.392) Þ Þ 54 oring S...U...SWU S...SWU /D=~3.0 arbide /D=~7.0 /D=~3.0 Þ (0.625) 55 Þ Þ 66 Þ Þ 67 INSS N & D S...S() /D=~3.0 Þ Þ Þ Þ UNIN oring / Internal acing...s...s()...s /D=~3.0 arbide /D=~3.0 Þ Þ Þ Þ Þ (0.197) arbide /D=~7.0 Þ (5.5mm) Þ Þ Þ Þ 42 50 OOVIN opying...sx() S...SW S...SDU arbide /D=~7.0 Þ (7.5mm) /D=~3.0 /D=~3.0 Þ (9mm) Þ (11mm) Þ (0.476) Þ 56 54 Þ 48 U-O DIN ack oring S...SDZ...SZ /D=~3.0 arbide /D=~7.0 Þ (6.5mm) Þ (0.596) Þ 49 50 SOID ND IS...SZ arbide /D=~7.0 Þ (8.5mm) 56 IIN S S NI INDX in. ore Dia. Ø is indicated by the figure under depending on the boring bar size. 800.823.7284 Visit us online at Kyocerarecisionools.com 9

IS O ODUIVIY IOVN DS oring xample xample of utting ime eduction xample of onventional utting INSS N & D UNIN OOVIN U-O DIN SOID ND IS oring xample xample of utting ime eduction IIN S S NI INDX 10 800.823.7284 Visit us online at Kyocerarecisionools.com

IS O ODUIVIY IOVN ow to Select round hipbreakers (for Internal inishing in utomatic athes) hoose a ground insert with an appropriate hand, in order to evacuate chips to the outside of the workpiece. eneral ombinations ombination for chip evacuation toward the exit of hole oring ar ight-hand () oring ar ight-hand () Insert eft-hand () Insert ight-hand () DS INSS N & D UNIN oring ar ight-hand () oring ar ight-hand () Insert eft-hand () Insert ight-hand () OOVIN U-O oolholder ttachment to educe hattering Normal ounting ad ttachment DIN SOID ND IS IIN When clamping rigidity is low, chattering tends to occur. ighten the toolholder firmly with at least two clamp bolts. If the entrance of the sleeve is deformed or loosened, actual overhang length becomes longer and chattering can occur everse ounting When the supporting point lies on the front of the clamp bolt, the actual overhang length becomes longer and it can cause chattering. he edge height can also be changed. S S NI INDX ighten the clamp bolts from the insert mounting side dge height can be affected by which side the clamping bolts are tightened from. 800.823.7284 Visit us online at Kyocerarecisionools.com 11

Z SION UID DS Z ar Kyocera s Original Z djust Structure asy djustment / igh recision INSS asy adjustment and high precision Z ar minimizes deviation with high rigidity clamping N & D O 1225 for Stable utting and xtended ool ife UNIN ow to Select ars for high precision and S for cost reduction (olerances are different.) recision-oriented S ost-oriented OOVIN U-O Insert olerance Offset ongitudinal direction utting edge height in. ore Dia. recision-oriented ±0.025mm ±0.05mm +0.05mm/0mm Same as Shank Dia. DIN S ost-oriented ±0.060mm ±0.10mm +0.06mm/0mm Not same as shank dia. * See "Dimensions" page for details. SOID ND IS IIN ow to Select Sleeves New indexable boring bar added Z ar lus S S NI with coolant hole with Z adjust structure S for cost oriented cutting INDX and can adjust overhang length by Z adjust structure Z- sleeve Z- sleeve Z-S sleeve 12 800.823.7284 Visit us online at Kyocerarecisionools.com

Z SION / IION UID ow to Select ars and Sleeves for ach pplication ype ar + / ype Sleeve igh recision equired asy Overhang djustment equired ositioning Not equired ost eduction equired xcellent repeatability and drastic tool change time reduction DS Internal oolant ocus on recision ocus on ost INSS ype ar + ype Sleeve ype ar + ype Sleeve S ype ar + ype Sleeve Z ar lus + ype Sleeve S ype ar + S ype Sleeve N & D Z- (igh precision with coolant hole) Now added in the Z sleeve ineup! Kyocera's unique Z adjust structure and internal coolant system improve dimensional accuracy and surface roughness! UNIN Z- pplicable Sleeve Z- Internal Stucture OOVIN oolant oolant U-O oolant ole oolant ole DIN ow to Set ar in Sleeve ow to use adjustment pin and prevent coolant leakage (ig.1) ut the adjustment pin into the hole according to the overhang length and push it into the sleeve using the wrench "W-1.5". ighten the clamp screw for the adjustment pin "S3x4" using the wrench "W-1.5" from both sides of the sleeve. ut the additional clamp screws "S3x4" into the un-used adjustment pin holes to prevent coolant leakage using the wrench "W-1.5" and fix them from both sides of the sleeve. ow to secure the bar (ig.2) With the chip pocket upward, set the bar into the sleeve. ress the slant face of the bar end with the adjustment pin. ake sure that the bar does not rotate. (ig.3) ighten the clamp screw with wrench "W-2" and secure the bar. (Use "W-1.5" if shank dia. is 3mm or less.) SOID ND IS IIN S S NI INDX ig.1 ow to use the adjustment pin ig.2 ow to secure the bar ig.3 lamped bar 800.823.7284 Visit us online at Kyocerarecisionools.com 13

NW IS! Z Z- (oring) igh recision DS INSS N & D INDX NI S S IIN SOID ND IS DIN U-O OOVIN UNIN Z ar Dimensions (metric) art Number Z ar Identification System in. ore Dia. Dimensions (mm) O rade arbide Ø ØD 1 2 3 S r 1225 W05 pplicable Sleeve 20~ 25 Z 020020-008 2.0 2.0 1.8 32.0 8.0 4.9 0.85 0.25 0.08 ±0.015 Þ Z020 025025-008 2.5 2.5 2.3 35.0 10.5 4.9 1.10 0.25 0.08 ±0.015 Þ 025025-015 2.5 2.5 2.3 35.0 10.5 4.9 1.10 0.25 0.15 ±0.02 Þ 030030-008 3.0 3.0 2.7 38.9 13.0 6.9 1.35 0.30 0.08 ±0.015 Þ 030030-015 3.0 3.0 2.7 38.9 13.0 6.9 1.35 0.30 0.15 ±0.02 Þ 035035-008 3.5 3.5 3.2 41.9 15.0 6.9 1.60 0.40 0.08 ±0.015 Þ 035035-015 3.5 3.5 3.2 41.9 15.0 6.9 1.60 0.40 0.15 ±0.02 Þ 040040-008 4.0 4.0 3.6 48.8 20.0 9.8 1.85 0.40 0.08 ±0.015 Þ 040040-015 4.0 4.0 3.6 48.8 20.0 9.8 1.85 0.40 0.15 ±0.02 Þ 050050-008 5.0 5.0 4.6 58.1 25.0 9.8 2.35 0.50 0.08 ±0.015 Þ 050050-015 5.0 5.0 4.6 58.1 25.0 9.8 2.35 0.50 0.15 ±0.02 Þ 060060-008 6.0 6.0 5.6 66.1 30.0 11.8 2.85 0.60 0.08 ±0.015 Þ 060060-015 6.0 6.0 5.6 66.1 30.0 11.8 2.85 0.60 0.15 ±0.02 Þ Z025 Z030 Z035 Z040 Z050 Z060 Z 020020-005 2.0 2.0 1.8 32.0 8.0 4.9 0.85 0.25 0.05 ±0.01 Þ Z020 025025-005 2.5 2.5 2.3 35.0 10.5 4.9 1.10 0.30 0.05 ±0.01 Þ 025025-015 2.5 2.5 2.3 35.0 10.5 4.9 1.10 0.30 0.15 ±0.02 Þ 030030-005 3.0 3.0 2.7 38.9 13.0 6.9 1.35 0.40 0.05 ±0.01 Þ 030030-015 3.0 3.0 2.7 38.9 13.0 6.9 1.35 0.40 0.15 ±0.02 Þ 035035-005 3.5 3.5 3.2 41.9 15.0 6.9 1.60 0.50 0.05 ±0.01 Þ 035035-015 3.5 3.5 3.2 41.9 15.0 6.9 1.60 0.50 0.15 ±0.02 Þ 040040-005 4.0 4.0 3.6 48.8 20.0 9.8 1.85 0.50 0.05 ±0.01 Þ 040040-015 4.0 4.0 3.6 48.8 20.0 9.8 1.85 0.50 0.15 ±0.02 Þ 050050-005 5.0 5.0 4.6 58.1 25.0 9.8 2.35 0.70 0.05 ±0.01 Þ 050050-015 5.0 5.0 4.6 58.1 25.0 9.8 2.35 0.70 0.15 ±0.02 Þ 060060-005 6.0 6.0 5.6 66.1 30.0 11.8 2.85 0.90 0.05 ±0.01 Þ 060060-015 6.0 6.0 5.6 66.1 30.0 11.8 2.85 0.90 0.15 ±0.02 Þ olerance: Offset ±0.025mm (of the reference pin), overall length ±0.05mm, edge height +0.05/0mm Z Symbol of ar pplication : -oring ar and : ight-hand Z 020 020-008 in. ore Dia. 020 : 2.0mm 025 : 2.5mm Shank Dia. 020 : 2.0mm 025 : 2.5mm recision : igh recision S: Standard orner- (r) 008 : 0.08mm 015 : 0.15mm Z025 Z030 Z035 Z040 Z050 Z060 ecommended utting onditions 17 hipbreaker : hipbreaker (without lead angle) : hipbreaker (with lead angle) N: Without chipbreaker Z ars are sold in 1 piece boxes. 14 (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

Z Z-S (oring) ost eduction DS INSS N & D Z ar Dimensions (metric) art Number in. ore Dia. Dimensions (mm) rade O Ø ØD 1 2 3 S r 1225 pplicable Sleeve 20~ 25 Z 020017S-008 2.0 1.7 1.5 27.3 7.0 4.7 0.79 0.19 0.08 ±0.015 Þ Z017 025020S-008 0.08 ±0.015 Þ 2.5 2.0 1.82 32.0 8.0 4.8 0.94 0.16 025020S-015 0.15 ±0.02 Þ 030025S-008 0.08 ±0.015 Þ 3.0 2.5 2.3 35.0 10.5 4.8 1.19 0.15 030025S-015 0.15 ±0.02 Þ 035030S-008 0.08 ±0.015 Þ 3.5 3.0 2.8 39.0 13.0 6.8 1.44 0.18 035030S-015 0.15 ±0.02 Þ 040035S-008 0.08 ±0.015 Þ 4.0 3.5 3.3 42.0 15.0 6.7 1.69 0.24 040035S-015 0.15 ±0.02 Þ 045040S-008 0.08 ±0.015 Þ 4.5 4.0 3.8 49.0 20.0 9.7 1.94 0.27 045040S-015 0.15 ±0.02 Þ 055050S-008 0.08 ±0.015 Þ 5.5 5.0 4.8 58.2 25.0 9.7 2.44 0.33 055050S-015 0.15 ±0.02 Þ 065060S-008 0.08 ±0.015 Þ 6.5 6.0 5.8 66.2 30.0 11.8 2.94 0.38 065060S-015 0.15 ±0.02 Þ 075070S-008 0.08 ±0.015 Þ 7.5 7.0 6.8 74.2 35.0 11.7 3.44 0.44 075070S-015 0.15 ±0.02 Þ Z020 Z025 Z030 Z035 Z040 Z050 Z060 Z070 Z 020017S-005 2.0 1.7 1.5 27.3 7.0 4.7 0.79 0.20 0.05 ±0.01 Þ Z017 025020S-005 0.05 ±0.01 Þ 2.5 2.0 1.82 32.0 8.0 4.8 0.94 0.16 025020S-015 0.15 ±0.02 Þ 030025S-005 0.05 ±0.01 Þ 3.0 2.5 2.3 35.0 10.5 4.8 1.19 0.20 030025S-015 0.15 ±0.02 Þ 035030S-005 0.05 ±0.01 Þ 3.5 3.0 2.8 39.0 13.0 6.8 1.44 0.26 035030S-015 0.15 ±0.02 Þ 040035S-005 0.05 ±0.01 Þ 4.0 3.5 3.3 42.0 15.0 6.7 1.69 0.33 040035S-015 0.15 ±0.02 Þ 045040S-005 0.05 ±0.01 Þ 4.5 4.0 3.8 49.0 20.0 9.7 1.94 0.31 045040S-015 0.15 ±0.02 Þ 055050S-005 0.05 ±0.01 Þ 5.5 5.0 4.8 58.2 25.0 9.7 2.44 0.45 055050S-015 0.15 ±0.02 Þ 065060S-005 0.05 ±0.01 Þ 6.5 6.0 5.8 66.2 30.0 11.7 2.94 0.59 065060S-015 0.15 ±0.02 Þ 075070S-005 0.05 ±0.01 Þ 7.5 7.0 6.8 74.2 35.0 11.7 3.44 0.65 075070S-015 0.15 ±0.02 Þ olerance: Offset ±0.06mm (of the reference pin), overall length ±0.1mm, edge height +0.06/0mm Z020 Z025 Z030 Z035 Z040 Z050 Z060 Z070 ecommended utting onditions 17 UNIN OOVIN U-O DIN SOID ND IS IIN S S NI INDX Z ars are sold in 1 piece boxes. Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com 15

Z Z-N (oring) Without hipbreaker DS INSS N & D NI S S IIN SOID ND IS DIN U-O OOVIN UNIN Z ar Dimensions (metric) art Number in. ore Dia. Dimensions (mm) Ø ØD 1 2 3 S r Z 020017-005N 2.0 1.7 1.50 27.3 7.0 4.7 0.79 0.20 rade O N D 1225 KN05 KD001 pplicable Sleeve 20~ 25 ig.1 Z017 025020-005N 2.5 2.0 1.82 32.0 8.0 4.8 0.94 0.16 ig.1 Z020 030025-005N 3.0 2.5 2.30 35.0 10.5 4.8 1.19 0.16 ig.1 Z025 035030-005N 3.5 3.0 2.80 39.0 13.0 6.8 1.44 0.19 ig.1 Z030 040035-005N 4.0 3.5 3.30 42.0 15.0 6.7 1.69 0.25 0.05 ±0.015 ig.1 Z035 045040-005N 4.5 4.0 3.80 49.0 20.0 9.7 1.94 0.28 ig.1 Z040 055050-005N 5.5 5.0 4.80 58.2 25.0 9.7 2.44 0.33 ig.1 Z050 065060-005N 6.5 6.0 5.80 66.2 30.0 11.7 2.94 0.39 ig.1 Z060 075070-005N 7.5 7.0 6.80 74.2 35.0 11.7 3.44 0.45 ig.1 Z070 Z 030030-003N 3.0 3.0 2.60 38.8 13.0 6.8 1.25 0.30 ig.2 Z030 040040-003N 4.0 4.0 3.60 48.8 20.0 9.8 1.75 0.50 ig.3 Z040 050050-003N 5.0 5.0 4.60 58.1 25.0 9.8 2.25 0.50 0.035 ±0.015 ig.3 Z050 060060-003N 6.0 6.0 5.60 66.1 30.0 11.8 2.75 0.50 ig.3 Z060 070070-003N 7.0 7.0 6.60 74.1 35.0 11.8 3.25 0.50 ig.3 Z070 Z 040040-003N 4.0 4.0 3.60 48.8 20.0 9.8 1.75 0.50 ig.3 Z040 050050-003N 5.0 5.0 4.60 58.1 25.0 9.8 2.25 0.50 0.035 ig.3 Z050 060060-003N 6.0 6.0 5.60 66.1 30.0 11.8 2.75 0.50 ±0.015 ig.3 Z060 070070-003N 7.0 7.0 6.60 74.1 35.0 11.8 3.25 0.50 ig.3 Z070 dge reparation rade dge reparation emarks 1225 Sharp dge - KN05 0.08mm 15 hamfered utting dge 00815 KD001 Sharp dge - ecommended utting onditions 17 INDX Z ars are sold in 1 piece boxes. 16 (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

Z ecommended utting onditions hipbreaker (Z-... ype Workpiece aterial Z-S... ype) Insert rade (Vc:sfm) Z020/025 Z030/035 Z040/045 O arbide Depth of ut: D.O..(in), eed: f(ipr) Z050/055/ 060/065/075 emarks DS arbon / lloy (1045) 1225 W05 D.O.. f D.O.. f D.O.. f D.O.. f 100~325 - ~0.0118 ~0.0012 ~0.0157 ~0.0016 ~0.0177 ~0.0028 ~0.0197 ~0.0039 INSS Stainless (304) 100~250 - ~0.0079 ~0.0008 ~0.0118 ~0.0012 ~0.0138 ~0.0020 ~0.0157 ~0.0028 Non-ferrous aterial - ~325 ~0.0118 ~0.0020 ~0.0157 ~0.0024 ~0.0177 ~0.0039 ~0.0197 ~0.0059 Wet N & D hipbreaker (Z-... ype Z-S... ype) Workpiece aterial arbon / lloy (1045) Insert rade (Vc:sfm) Z020/025 Z030/035 Z040/045 O Depth of ut: D.O..(in), eed: f(ipr) Z050/055/ 060/065/075 1225 D.O.. f D.O.. f D.O.. f D.O.. f 100~325 ~0.0079 ~0.0012 ~0.0079 ~0.0020 ~0.0118 ~0.0028 ~0.0118 ~0.0028 Stainless 100~250 ~0.0079 ~0.0008 ~0.0079 ~0.0012 ~0.0098 ~0.0020 ~0.0098 ~0.0020 emarks Wet UNIN N hipbreaker (Without hipbreaker) OOVIN Workpiece aterial Insert rade (Vc:sfm) Z020/025 Z030/035 Z040/045 Z055/065/075 O Depth of ut: D.O..(in), eed: f(ipr) 1225 D.O.. f D.O.. f D.O.. f D.O.. f emarks U-O arbon / lloy 100~325 ~0.0118 ~0.0012 ~0.0157 ~0.0016 ~0.0177 ~0.0028 ~0.0197 ~0.0039 Stainless 100~250 ~0.0079 ~0.0008 ~0.0118 ~0.0012 ~0.0138 ~0.0020 ~0.0157 ~0.0028 Wet DIN Non-ferrous aterial 200~325 ~0.0118 ~0.0020 ~0.0157 ~0.0024 ~0.0177 ~0.0028 ~0.0197 ~0.0039 Workpiece aterial Z ar ompatibility Insert rade (Vc:sfm) Z030 Z040/045 Z050/060/070 O Diamond Depth of ut: D.O..(in), eed: f(ipr) KN05 KD001 D.O.. f D.O.. f D.O.. f Non-ferrous aterial - ~975 - - ~0.0177 ~0.0039 ~0.0197 ~0.0059 ard aterials (including heat-treated steel) ~325 - ~0.0028 ~0.0012 ~0.0039 ~0.0020 ~0.0059 ~0.0028 emarks Wet SOID ND IS IIN S S Z ar is compatible with conventional icro-ars ar Sleeve Z... Z...S/N...(onventional) Z.../ Z...S S...(onventional) 1 (ompatible) 1 Some diameters of conventional icro-ars are incompatible 2 Use them without djustment ins. Overhang length of bar is not adjustable. 1 (ompatible) 1 2 (ompatible) 1 (ompatible) NI INDX 800.823.7284 Visit us online at Kyocerarecisionools.com 17

NW IS! Z - US S-S-Z ype aximum overhand length - /D = ~3 DS INSS N & D ight-hand shown eft-hand insert for ight-hand toolholder -S-Z ype aximum overhand length - /D = ~5 UNIN S S IIN SOID ND IS DIN U-O OOVIN oolholder Dimensions pplicable Inserts oolholder art Number pplication inute D.O.. inishing inishing / recision Non-ferrous etals ard aterial ef. age 8 11 10 12 4 Stock () ight-hand shown in. ore Dia. Dimensions (mm) Ø ØD 1 2 3 4 - -S D N...S 03-... 1109.. 1109.. 1109.. - W1109.....S 04-... 1411.. 1411.. 1411.. W1411.. W1411.. Std. oolant orner- Drawing ole (r) Spare arts lamp Screw Wrench pplicable Sleeve 20~ 25 S045X-S03-050Z Þ 5 4.5 4.3 42.4 - - 8.5 2.5 15 0.2 No ig.1 S-1635- Z045 S060X-S04-070Z Þ 7 6.0 5.4 53.9 11.8-11.5 3.5 13 0.2 No ig.2 S-2035 Z060-6 045X-S03-050Z Þ 5 4.5 4.3 51.4 - - 8.5 2.5 15 0.2 No ig.3 S-1635 Z045 arbide 060X-S04-070Z Þ 7 6.0 5.4 65.9 11.8-11.5 3.5 13 0.2 No ig.4 S-2035 Z060 ecommended utting onditions 63~ 64 eft-hand insert for ight-hand toolholder NI INDX 18 (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

Z (OYIN / OIIN) NW IS! ZV ype (oring / Internal acing / Internal rofiling) DS INSS oolholder Dimensions art Number ight-hand shown in. ore Dia. Dimensions (mm) rade O Ø ØD 1 2 3 S r 1225 ZV 035030-010 3.5 3 2.8 38.0 8 5.8 0.17 0.22 pplicable Sleeve 20~ 25 045040-010 4.5 4 3.8 43.0 10 6.8 0.17 0.26 ±0.015 Þ Z040 055050-010 5.5 5 4.8 50.2 12 7.7 0.17 0.29 0.10 Þ Z050 Þ Z030 065060-010 6.5 6 5.8 55.2 14 8.6 0.17 0.32 Þ Z060 ecommended utting onditions N & D UNIN OOVIN Workpiece aterial arbon / lloy (1045) Insert rade (Vc:sfm) Z020/025 Z030/035 Z040/045 O Depth of ut: D.O..(in), eed: f(ipr) 1225 D.O.. f D.O.. f D.O.. f 100~330 ~0.0020 ~0.0016 ~0.0028 ~0.0028 ~0.0039 ~0.0028 Stainless 100~260 ~0.0012 ~0.0012 ~0.0020 ~0.0020 ~0.0028 ~0.0020 emarks Wet U-O DIN ZV ype (oring / Internal acing / Internal rofiling) Stable achining with etter hip ontrol SOID ND IS Spherical Internal rofiling IIN ZV045040-010 f 0.0004ipr 0.0012ipr 0.0020ipr D.O.. ompetitor f 0.0004ipr 0.0012ipr 0.0020ipr D.O.. S S 0.0028" 0.0028" NI 0.0020" 0.0020" oor chip control INDX 0.0.0012" Vc = 330sfm Workpiece: Stainless (Wet) 0.0.0012" oor chip control Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com 19

NW IS! Z Z- (pplicable Sleeve) With coolant hole and Z adjust structure DS INSS N & D SOID ND IS DIN U-O OOVIN UNIN art Number Stock Dimensions (mm) Ød1 ØD1 ØD2 Ød2 1 2 3 Z 01719-120 Þ 1.7 0.75" 13 6 18.0 120 01720-120 1.7 20 13 6 19.0 120 01722-135 1.7 22 13 6 21.0 135 16 8 16 41.5 01725.0-135 1.7 25 13 6 24.0 135 01725.4-120 Þ 1.7 1.00" 13 6 24.4 120 Z 02019-120 Þ 2.0 0.75" 13 6 18.0 120 02020-120 2.0 20 13 6 19.0 120 02022-135 2.0 22 13 6 21.0 135 16 8 20 41.5 02025.0-135 2.0 25 13 6 24.0 135 02025.4-120 Þ 2.0 1.00" 13 6 24.4 120 Z 02519-120 Þ 2.5 0.75" 13 6 18.0 120 02520-120 2.5 20 13 6 19.0 120 02522-135 2.5 22 13 6 21.0 135 16 8 20 41.5 02525.0-135 2.5 25 13 6 24.0 135 02525.4-120 Þ 2.5 1.00" 13 6 24.4 120 1: 4 shows Ød1 length 2: Dimension shows overhang length of the Z ar when attached to sleeve. Dimensions in ( ) show overhand length of Z ar US. 3: type bars are not adjustable. hoose sleeves (Ød1) to meet with ØD dimension of bar. Spare arts (for Z- Sleeves) 1 4 5 30.5 30.5 30.5 30.5 30.5 30.5 (mm) Overhang ength of ar 2 djustment in Setting No1 No2 No3 No4 Drawing pplicable Z ar 14~ 16 28 10 7.5 3.5 - - ig.1 Z...017... 8.5 4.5 - - ig.1 11.0 7.0 - - ig.1 Z...020... 2 0202... Z...025... Z...025... NI S S IIN art Number Z 017...-.. 020...-.. 025...-.. 030...-.. Z 035...-.. 040...-.. 050...-.. 060...-.. Spare arts lamp Screw Wrench lamp Screw Wrench djustment in S3x4 (for adjustment pin,coolant leak prevention and bar) S3x4 (for adjustment pin, coolant leak prevention and bar) W-1.5 1N m ightening orque W-1.5 1N m ightening orque - - 025097 S4x4 (for bar) W-2 2N m ightening orque 025097 Z ar or Z ar djustment 2.0mm lamp Screw S4x4 Wrench W-2 or diameters under Ø3, use W-1.5 and S3x4 (Same part of adjustment pin) Sleeve INDX 070...-.. 1) If shank dia. is Ø2.5mm or less, use 6 clamp screws (S3x4), distributed as follows: or adjustment pin...2 pcs or coolant leak prevention...2 pcs or bar...2 pcs 2) If shank dia. is Ø3.0mm, use 9 clamp screws (S3x4), distributed as follows: or adjustment pin...2 pcs or coolant leak prevention...4 pcs or bar...3 pcs or adjustment pin clamping or coolant leak prevention 1.5mm lamp Screw S3x4 Wrench W-1.5 djustment in ole djustment in 025097 hangeable overhang length 20 (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

Z NW IS! Z- (pplicable Sleeve) With coolant hole and Z adjust structure DS INSS N & D art Number Stock Dimensions (mm) Ød1 ØD1 ØD2 Ød2 1 2 3 Z 03019-120 Þ 3.0 0.75" 13 6.0 18.0 120 03020-120 3.0 20 13 6.0 19.0 120 03022-135 3.0 22 13 6.0 21.0 135 16 8 21 41.5 03025.0-135 3.0 25 13 6.0 24.0 135 03025.4-120 Þ 3.0 1.00" 13 6.0 24.4 120 Z 03519-120 Þ 3.5 0.75" 13 6.0 18.0 120 03520-120 3.5 20 13 6.0 19.0 120 03522-135 3.5 22 13 6.0 21.0 135 16 8 21 41.5 03525.0-135 3.5 25 13 6.0 24.0 135 03525.4-120 Þ 3.5 1.00" 13 6.0 24.4 120 Z 04019-120 Þ 4.0 0.75" 13 6.0 18.0 120 04020-120 4.0 20 13 6.0 19.0 120 04022-135 4.0 22 13 6.0 21.0 135 16 8 22 41.5 04025.0-135 4.0 25 13 6.0 24.0 135 04025.4-120 Þ 4.0 1.00" 13 6.0 24.4 120 Z 05019-120 Þ 5.0 0.75" 16 6.0 18.0 120 05020-120 5.0 20 16 6.0 19.0 120 05022-135 5.0 22 16 6.0 21.0 135 18 9 22 44.0 05025.0-135 5.0 25 16 6.0 24.0 135 05025.4-120 Þ 5.0 1.00" 16 6.0 24.4 120 Z 06019-120 Þ 6.0 0.75" 16 7.4 18.0 120 06020-120 6.0 20 16 7.4 19.0 120 06022-135 6.0 22 16 7.4 21.0 135 18 9 22 41.5 06025.0-135 6.0 25 16 7.4 24.0 135 06025.4-120 Þ 6.0 1.00" 16 7.4 24.4 120 Z 07019-120 Þ 7.0 0.75" 16 7.4 18.0 120 07020-120 7.0 20 16 7.4 19.0 120 07022-135 7.0 22 16 7.4 21.0 135 18 9 22 44.0 07025.0-135 7.0 25 16 7.4 24.0 135 07025.4-120 Þ 7.0 1.00" 16 7.4 24.4 120 1: 4 shows Ød1 length 2: Dimension shows overhang length of the Z ar when attached to sleeve. Dimensions in ( ) show overhand length of Z ar US. 3: type bars are not adjustable. hoose sleeves (Ød1) to meet with ØD dimension of bar. 4 5 30.5 30.5 31.1 31.1 30.5 30.5 30.0 30.0 30.0 30.0 30.0 30.0 (mm) Overhang ength of ar 2 djustment in Setting No1 No2 No3 No4 Drawing 13.5 9.5 5.5 - ig.2 15.5 11.5 7.5 - ig.2 20.5 16.5 12.5 8.5 ig.3 25.5 20.5 15.5 10.5 ig.3 30.5 25.5 20.5 15.5 ig.3 35.5 30.5 25.5 20.5 ig.3 pplicable Z ar or Z ar US 14~ 16 18, 19, 28 34, 45 10 Z...030... ZV035030-... Z...030-... Z...030-... 2 0303-... Z...035... Z...035-... Z...040... ZV045040-... Z...040-... Z...040-... Z...040-... 2...04-... Z...050... ZV055050-... Z...050-... Z...050-... Z...050-... 2...05-... Z...060... ZV065060-... Z...060-... Z...060-... _060X-...-070Z 2...0606-... Z...070... Z...070-... Z...070-... Z...070-... 2...07-... UNIN OOVIN U-O DIN SOID ND IS IIN S S NI INDX Z ar ounting rocedure 23 Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com 21

Z Z- (pplicable Sleeve) djustable DS INSS NI S S IIN SOID ND IS DIN U-O OOVIN UNIN N & D art Number Stock Dimensions (mm) Ød1 ØD1 ØD2 Ød2 1 2 3 4 (mm) Overhang ength of ar 2 djustment in Setting No1 No2 No3 No4 Drawing pplicable Z ar or Z ar US 14~ 16 19, 28 34, 45 10 Z 01716-100 1.7 16 13 6 15.0 100 01719-120 Þ 1.7 0.75" 13 6 18.0 120 01720-120 1.7 20 13 6 19.0 120 01722-135 1.7 22 13 6 21.0 135 16 8 16 7.5 3.5 - - ig.1 Z 017 01725.0-135 1.7 25 13 6 24.0 135 01725.4-120 Þ 1.7 1.00" 13 6 24.4 120 Z 02016-100 2.0 16 13 6 15.0 100 02019-120 Þ 2.0 0.75" 13 6 18.0 120 02020-120 2.0 20 13 6 19.0 120 Z 020 16 8 20 8.5 4.5 - - ig.1 2 02022-135 2.0 22 13 6 21.0 135 0202-... 02025.0-135 2.0 25 13 6 24.0 135 02025.4-120 Þ 2.0 1.00" 13 6 24.4 120 Z 02516-100 2.5 16 13 6 15.0 100 02519-120 Þ 2.5 0.75" 13 6 18.0 120 02520-120 2.5 20 13 6 19.0 120 Z 025 16 8 20 11.0 7.0 - - ig.1 02522-135 2.5 22 13 6 21.0 135 Z 025-02525.0-135 2.5 25 13 6 24.0 135 02525.4-120 Þ 2.5 1.00" 13 6 24.4 120 Z 03016-100 3.0 16 13 6 15.0 100 03019-120 Z 030 Þ 3.0 0.75" 13 6 18.0 120 ZV035030-... 03020-120 3.0 20 13 6 19.0 120 16 8 21 13.5 9.5 5.5 - ig.2 Z 030-03022-135 3.0 22 13 6 21.0 135 Z 030-03025.0-135 3.0 25 13 6 24.0 135 2 0303-... 03025.4-120 Þ 3.0 1.00" 13 6 24.4 120 Z 03516-100 3.5 16 13 6 15.0 100 03519-120 Þ 3.5 0.75" 13 6 18.0 120 03520-120 3.5 20 13 6 19.0 120 Z 035 16 8 22 15.5 11.5 7.5 - ig.2 03522-135 3.5 22 13 6 21.0 135 Z 035 03525.0-135 3.5 25 13 6 24.0 135 03525.4-120 Þ 3.5 1.00" 13 6 24.4 120 Z 04016-100 4.0 16 13 6 15 100 Z 040 04019-120 Þ 4.0 19.05 13 6 18 120 ZV045040-... 04020-120 4.0 20 13 6 19 120 Z 040-16 8 24 20.5 16.5 12.5 8.5 ig.4 (23) 04022-135 4.0 22 13 6 21 135 Z 040-04025.0-135 4.0 25 13 6 24 135 Z 040-04025.4-120 Þ 4.0 25.4 13 6 24.4 120 2 0303-... 1: 4 shows Ød1 length 2: Dimension shows overhang length of the Z ar when attached to sleeve. Dimensions in ( ) show overhand length of Z ar US. 3: type bars are not adjustable. hoose sleeves (Ød1) to meet with ØD dimension of bar. Spare arts (for Z- Sleeves) art Number Spare arts lamp Screw Wrench lamp Screw Wrench djustment in pplicable Z ar INDX Z Z 017...-.. - Z020017 W-1.5 020...-.. S3x4 Z020020 Z025020 - - 025140 1N m 025...-.. (for adjustment pin and bar) Z025025 Z030025 ightening orque 030...-.. Z030030 Z 030 035...-.. Z035035 Z040035 040...-.. W-1.5 W-2 Z040040 Z 040 S3x4 S4x4 050...-.. 025140 Z050050 Z 050 1N m 2N m (only for adjustment pin) (for bar) 060...-.. ightening orque ightening orque Z060060 Z 060 070...-.. - Z 070 22 (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

Z Z- (pplicable Sleeve) djustable DS INSS art Number Stock Dimensions (mm) Ød1 ØD1 ØD2 Ød2 1 2 3 (mm) Overhang ength of ar 2 Z 04516-100 4.5 16 16 6 15.0 100 4 - ig.3 04519-120 Þ 4.5 0.75" 16 6 18.0 120 04520-120 4.5 20 16 6 19.0 120 23.0 18.5 14.0 9.5 25.3 04522-135 4.5 22 16 6 21.0 135 18 9 ( 14 ) ( 9.5 ) ( - ) ( - ) ig.4 04525.0-135 4.5 25 16 6 24.0 135 04525.4-120 Þ 4.5 1.00" 16 6 24.4 120 Z 05016-100 5.0 16 16 6 15.0 100 4 - ig.3 05019-120 Þ 5.0 0.75" 16 6 18.0 120 05020-120 5.0 20 16 6 19.0 120 29.0 25.5 20.5 15.5 10.5 05022-135 5.0 22 16 6 21.0 135 18 9 ig.4 05025.0-135 5.0 25 16 6 24.0 135 05025.4-120 Þ 5.0 1.00" 16 6 24.4 120 Z 06016-100 6.0 16 16 8 15.0 100 4 - ig.3 06019-120 Þ 6.0 0.75" 16 8 18.0 120 06020-120 6.0 20 16 8 19.0 120 31.0 30.5 25.5 20.5 15.5 06022-135 6.0 22 16 8 21.0 135 18 9 ig.4 06025.0-135 6.0 25 16 8 24.0 135 06025.4-120 Þ 6.0 1.00" 16 8 24.4 120 Z 07016-100 7.0 16 16 8 15.0 100 4 - ig.3 07019-120 Þ 7.0 0.75" 16 8 18.0 120 07020-120 7.0 20 16 8 19.0 120 33.0 35.5 30.5 25.5 07022-135 7.0 22 16 8 21.0 135 18 9 ig.4 07025.0-135 7.0 25 16 8 24.0 135 07025.4-120 Þ 7.0 1.00" 16 8 24.4 120 1: 4 shows Ød1 length 2: Dimension shows overhang length of the Z ar when attached to sleeve. Dimensions in ( ) show overhand length of Z ar US. 3: type bars are not adjustable. hoose sleeves (Ød1) to meet with ØD dimension of bar. Z ar Identification System 4 djustment in Setting No1 No2 No3 No4 Z 017 16-100 Drawing pplicable Z ar or Z ar US 14~ 16 18, 19, 28 35, 45 10 _045X- 050Z Z 050 ZV055050- Z 050- Z 050- Z 050 3 05- Z 060 ZV065060- Z 060- Z 060- _060X- -070Z 3 0606- Z 070 Z 070- Z 070- Z 070-3 07- N & D UNIN OOVIN U-O DIN SOID ND IS IIN Z Symbol of ar Z ar ounting rocedure pplication -Sleeve Shank Dia. of Z ar 017 : 1.7mm 025 : 2.5mm Sleeve Shank Dia. 16 : 16.00mm 25.4 : 25.40mm Symbol of recision : igh recision with oolant ole : S: recision Standard Overall ength of Sleeve 100 : 100mm 120 : 120mm S S NI ow to use adjustment pin (ig.1) ut the adjustment pin into the hole. ush it into the sleeve, using the wrench W-1.5. ighten the clamp screw S3x4p with wrench W-1.5 to fix the adjustment screw. ow to secure bar (ig.2) INDX With the chip pocket upward, set the bar in sleeve. ress the slant of the end of the bar against the adjustment pin. ake sure that the bar does not rotate. (ig.3) ighten the clamp screw with wrench W-2 and secure the bar. (Use W-1.5 if shank dia. is 3mm or less.) Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com 23

Z Z-S (pplicable Sleeve) NO djustable DS INSS INDX NI S S IIN SOID ND IS DIN U-O OOVIN UNIN N & D art Number Stock Dimensions (mm) Ød1 ØD1 ØD2 ØD3 Ød2 1 2 3 4 Z 01712S-80 1.7 12 13 16 6 11.0 80 20 01716S-100 1.7 16 13-6 15.0 100 01719S-120 1.7 0.75" 13-6 18.0 120 01720S-120 1.7 20 13-6 19.0 120 01722S-135 1.7 22 13-6 21.0 135 01725.0S-135 1.7 25 13-6 24.0 135 01725.4S-120 1.7 1.00" 13-6 24.4 120 Z 02012S-80 2.0 12 13 16 6 11.0 80 20 02016S-100 2.0 16 13-6 15.0 100 02019S-120 2.0 0.75" 13-6 18.0 120 02020S-120 2.0 20 13-6 19.0 120 02022S-135 2.0 22 13-6 21.0 135 02025.0S-135 2.0 25 13-6 24.0 135 02025.4S-120 2.0 1.00" 13-6 24.4 120 Z 02512S-80 2.5 12 13 16 6 11.0 80 20 02516S-100 2.5 16 13-6 15.0 100 02519S-120 2.5 0.75" 13-6 18.0 120 02520S-120 2.5 20 13-6 19.0 120 02522S-135 2.5 22 13-6 21.0 135 02525.0S-135 2.5 25 13-6 24.0 135 02525.4S-120 2.5 1.00" 13-6 24.4 120 Z 03012S-80 3.0 12 13 16 6 11.0 80 20 03016S-100 3.0 16 13-6 15.0 100 03019S-120 3.0 0.75" 13-6 18.0 120 03020S-120 3.0 20 13-6 19.0 120 03022S-135 3.0 22 13-6 21.0 135 03025.0S-135 3.0 25 13-6 24.0 135 03025.4S-120 3.0 1.00" 13-6 24.4 120 Z 03512S-80 3.5 12 13 16 6 11.0 80 20 03516S-100 3.5 16 13-6 15.0 100 03519S-120 3.5 0.75" 13-6 18.0 120 03520S-120 3.5 20 13-6 19.0 120 03522S-135 3.5 22 13-6 21.0 135 03525.0S-135 3.5 25 13-6 24.0 135 03525.4S-120 3.5 1.00" 13-6 24.4 120 Z 04012S-80 4.0 12 13 16 6 11.0 80 20 04016S-100 4.0 16 13-6 15.0 100 04019S-120 4.0 0.75" 13-6 18.0 120 04020S-120 4.0 20 13-6 19.0 120 04022S-135 4.0 22 13-6 21.0 135 04025.0S-135 4.0 25 13-6 24.0 135 04025.4S-120 4.0 1.00" 13-6 24.4 120 :5 shows Ød1 length hoose sleeves (Ød1) to meet with ØD dimension of bar. djustment pin cannot be installed in Z-S sleeves. o adjust overhang of Z insert, please use Z- or Z- sleeves. 16 5 Drawing ig.1 8 16 16 - ig.2 16 ig.1 8 20 16 - ig.2 16 ig.1 8 20 16 - ig.2 16 ig.1 8 21 16 - ig.2 16 ig.1 8 22 16 - ig.2 16 ig.1 8 24 16 - ig.2 pplicable Z ar or Z ar US 14~ 16 19, 28 34, 45 10 Z 017 Z 020 0202-... Z 025 Z 025- Z 030 ZV035030-... Z 030- Z 030-0303-... Z 035 Z 035- Z 040 ZV045040-... Z 040- Z...040-... Z 040-...04-... 24 (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

Z Z-S (pplicable Sleeve) NO djustable DS INSS art Number Stock Dimensions (mm) Ød1 ØD1 ØD2 ØD3 Ød2 1 2 3 4 Z 05012S-80 5 12 16-6 11.0 80 20 ig.3-05016s-100 5 16 16-6 15.0 100 - ig.4 05019S-120 5 0.75" 16-6 18.0 120 05020S-120 5 20 16-6 19.0 120 05022S-135 5 22 16-6 21.0 135 05025.0S-135 5 25 16-6 24.0 135 05025.4S-120 5 1.00" 16-6 24.4 120 5-29 Drawing 18 9 ig.2 (24) Z 06012S-80 6 12 16-8 11.0 80 20 ig.3-06016s-100 6 16 16-8 15.0 100 - ig.4 06019S-120 6 0.75" 16-8 18.0 120 06020S-120 6 20 16-8 19.0 120 06022S-135 6 22 16-8 21.0 135 06025.0S-135 6 25 16-8 24.0 135-31 18 9 ig.2 (24) pplicable Z ar or Z ar US 14~ 16 18, 19, 28 34, 45 10 Z 050 ZV055050-... Z 050- Z 050- Z 050-...05-... Z 060 ZV...065060-... Z 060- Z 060- _060X-...-070Z...0606-... N & D UNIN OOVIN U-O 06025.4S-120 6 1.00" 16-8 24.4 120 Z 07012S-80 7 12 16-8 11.0 80 20 ig.3-07016s-100 7 16 16-8 15.0 100 - ig.4 07019S-120 7 0.75" 16-8 18.0 120 07020S-120 7 20 16-8 19.0 120 07022S-135 7 22 16-8 21.0 135 07025.0S-135 7 25 16-8 24.0 135 07025.4S-120 7 1.00" 16-8 24.4 120 :5 shows Ød1 length hoose sleeves (Ød1) to meet with ØD dimension of bar. djustment pin cannot be installed in Z-S sleeves. o adjust overhang of Z insert, please use Z- or Z- sleeves. - 33 18 9 ig.2 (24) Z 070 Z 070- Z 070- Z 070-...07-... DIN SOID ND IS IIN Spare arts (for Z-S Sleeves) Z Z art Number Screw Spare arts pplicable Z ar Z ar US Z ar US 2-dge ip ars Wrench Z- ype Z-S ype Z-N ype Z ype Z ype Z ype Z ype Z ype Z ype ype 017...S-.. Z...017... - - - 020...S-.. W-1.5 Z...020... - - 0202-... 025...S-.. S3 4 1N m ightening orque Z...025... Z...025-... - - 030...S-.. Z...030... Z_...030-... - 0303-... 035...S-.. Z...035... Z...035-... - - 040...S-.. W-2 Z...040... Z_...040-... -...04-... 050...S-.. S4 4 2N m Z...050... Z_...050-... -...05-... ightening orque 060...S-.. Z...060... Z_...060-... _060X-...-070Z...0606-... 070...S-.. Z...070... Z_...070-... -...07-... S S NI INDX Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com 25

DS Z Z ar Operability asy djustability of ar educes reparation ime! INSS Z ar Spare arts Z djust Structure N & D Screw for djustment in ar nd (Slant) djustment in UNIN Screw for ar djustment in ntry oint Overhang ength djustment in is eplaceable OOVIN ow to ttach djustment in ow to lamp ar S1 S2 S3 S4 U-O Screw for djustment in DIN djustment in SOID ND IS Insert the djustment in into the ole. it the djustment in with Screw Sharp cutting edge of the bars may cause injury. e careful when handling them. ress the Slant nd of the ar with the djustment in it the ar with ar Screw IIN S S NI INDX 26 800.823.7284 Visit us online at Kyocerarecisionools.com

Z ase Studies Valve art Vc=250sfm D.O..=0.004" f=0.0012ipr Wet Z030030-015 (1225) Z03025.0-135 304SS onnector Vc=150~200sfm D.O..=0.004" f=0.0012ipr Wet Z045040S-008 (1225) Z04025.0-135 316SS DS INSS 1225 3,000 pcs/edge 1225 2,000 pcs/edge N & D ompetitor 2,000 pcs/edge ompetitor 500 pcs/edge UNIN ompared to ompetitor, Z ar showed 1.5 times longer tool life with superior stability and accuracy of cutting edge position. ompared to ompetitor, Z ar showed 4 times longer tool life. djustable overhang length of sleeves (Z-) drastically improved operability. (User valuation) (User valuation) 1045 1214 Sleeve (utomotive art) Vc=150sfm D.O..=0.002" f=0.0024ipr Wet Z045040S-008 Z04016-100 (1225) ollar Vc=275sfm D.O..=0.002"~0.004" f=0.001ipr Wet Z040040-008 Z04019-120 (1225) OOVIN U-O 1225 2,000 pcs/edge 1225 10,000 pcs/edge (Stable achining) DIN ompetitor 1,000 pcs/edge ompared to ompetitor, Z ar doubled tool life. he excellent operability of the sleeve reduced the cycle time and improved productivity. ompetitor I 10,000 pcs/edge (Unstable) ompared to ompetitor I, Z ar achieved stable machining of 10,000 pcs/edge, minimizing deflection of the diameter. Number of defects is reduced drastically. SOID ND IS (User valuation) (User valuation) 4135 303SS IIN Sleeve Vc=100sfm D.O..=0.002" (2 passes) f=0.0012ipr Wet Z045040S-008 (1225) Z04019-100 ipe Vc=125sfm D.O..=0.009" f=0.0012ipr Wet Z030030-015 (1225) Z03016-100 S S NI 1225 300 pcs/edge (urther achining ossible) 1225 1,500 pcs/edge (No Defective roducts) INDX ompetitor 150 pcs/edge onventional K 1,500 pcs/edge (Unstable) 1225 has double the tool life of that of ompetitor with good chip control. (User valuation) onventional K was unstable in tool life and dimension. Z ar had stable machining. (User valuation) 800.823.7284 Visit us online at Kyocerarecisionools.com 27

DOU-SIDD IO S [ / ] (oring) DS N ype (Without hipbreaker) INSS N & D (ack oring) ight-hand shown UNIN INDX NI S S IIN SOID ND IS DIN U-O OOVIN icro-ar Dimensions art Number in. ore Dia. Dimensions (mm) Ø ØD 1 2 3 S r 0202-005 2 2 1.70 50 10 5 1.75 0.25 Insert rade VD oated arbide 930 KW10 0303-005 3 3 2.50 50 15 7 2.70 0.30 +0 0404-005 4 4 3.35 60 20 10 3.65 0.50-0.02 0505-005 5 5 4.30 70 25 12 4.55 0.50 0.05 0606-005 6 6 5.20 70 25 12 5.50 0.50 0707-005 7 7 6.20 80 25 12 6.45 0.50 0202-005N 2 2 1.70 50 10 5 1.75 0.25 0303-005N 3 3 2.50 50 15 7 2.70 0.30 0404-005N 0505-005N 4 5 4 5 3.35 4.30 60 70 20 25 10 12 3.65 4.55 0.50 0.50 +0-0.02 0.05 0606-005N 6 6 5.20 70 25 12 5.50 0.50 0707-005N 7 7 6.20 80 25 12 6.45 0.50 0404-005 4 4 3.35 60 21 8 3.65 1.00 +0-0.02 0505-005 5 5 4.30 70 26 8 4.55 1.30 0.05 pplicable Sleeves Workpiece aterial arbon / lloy Stainless icro ars ight-hand shown Insert rade (Vc:sfm) 02 ype 03 ype VD oated arbide 04 ype 04 ype Depth of ut: D.O..(in), eed: f(ipr) 05/06/07 ype 05 ype 930 KW10 D.O.. f D.O.. f D.O.. f D.O.. f 100~330 100~270 Non-ferrous aterial - Sleeves 20~ 25 0202-... Z 02... 0303-... 03... 0404-... 04... 0505-... 05... 0606-... 06... 0707-... 07... 0404-... Z 04... 0505-... 05... ecommended utting onditions - ~0.012 ~0.0012 ~0.016 ~0.0016 ~0.018 ~0.0028 ~0.020 ~0.0040 - ~0.012 ~0.0008 ~0.016 ~0.0012 ~0.018 ~0.0020 ~0.020 ~0.0030 100~330 ~0.012 ~0.0020 ~0.016 ~0.0024 ~0.018 ~0.0040 ~0.020 ~0.0060 emarks Wet : 1st ecommendation : 2nd ecommendation icro ars sold in 10 piece boxes. 28 (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

IO [S-S / S-S] DUS OVN N S-S (Internal oring) NO: S-S bars will be phased out and replaced with Z type bars. See 14 pplicable Sleeves 20~ 25 S 0202 ype S 0303 ype Shown on left DS NS ype (Without hipbreaker) INSS ermet, oated arbide N, Diamond N & D ight-hand shown S-S (ack oring) NO: S-S bars will be phased out and replaced with type bars. See 28 UNIN pplicable Sleeves 20~ 25 OOVIN ight-hand shown icro-ar Dimensions art Number in. ore Dia. Dimensions (mm) Ø ØD 1 2 3 S r S 0202-50S 2 1.8-50 - 5 0.9 0.25 0303-50S 3 2.8-50 - 7 1.4 0.3 Å 0404-60S 4 3.8 3.6 60 30 10 1.9 0.5 Å 0.05 0505-70S 5 4.8 4.4 70 40 12 2.4 0.5 Å 0606-70S 6 5.8 5.2 70 45 12 2.9 0.5 Å 0707-80S 7 6.8 6.2 80 50 12 3.4 0.5 Å S 0202-50NS 2 1.8-50 - 5 0.9 0.25 Insert rade VD oated arbide N D 0303-50NS 3 2.8-50 - 7 1.4 0.3 Ç Ç Ç Ç 0404-60NS 4 3.8 3.6 60 30 10 1.9 0.5 Ç Ç Ç Ç Ç Ç 0.05 0505-70NS 5 4.8 4.4 70 40 12 2.4 0.5 Ç Ç Ç Ç Ç 0606-70NS 6 5.8 5.2 70 45 12 2.9 0.5 Ç Ç Ç Ç Ç Ç 0707-80NS 7 6.8 6.2 80 50 12 3.4 0.5 Ç Ç Ç Ç Ç Ç S 0415-60S 4 3.8 3.6 60 20 8 1.9 1.0 0.05 0515-70S 5 4.8 4.6 70 20 8 2.4 1.3 ecommended utting onditions Workpiece aterial Insert rade (Vc:sfm) VD oated arbide N D 915 arbon / lloy - Stainless - 930 100~330 100~270 Non-errous aterial - - KW10 KN510 KN525 KD001 KD010 SO2 S03 915 930 Ç KW10 Ç S04 S04 Depth of ut: D.O..(in), eed: f(ipr) KN510 KN525 KD001 S05 S06 S07 S05 D.O.. f D.O.. f D.O.. f D.O.. f - - - - ~0.012 ~0.001 ~0.016 ~0.002 ~0.018 ~0.003 ~0.020 ~0.004 - - - - ~0.012 ~0.001 ~0.016 ~0.001 ~0.018 ~0.002 ~0.020 ~0.003 ~330 ardened aterial - - - - ~330 ~990 ~990 ~0.012 ~0.002 ~0.016 ~0.002 ~0.018 ~0.004 ~0.020 ~0.006 - - - - ~0.003 ~0.001 ~0.004 ~0.002 ~0.006 ~0.003 KD010 emarks Wet : 1st ecommendation : 2nd ecommendation icro ars sold in 10 piece boxes. U-O DIN SOID ND IS IIN S S NI INDX Þ : U.S. Stock Å : U.S. Stock (-hand Only) Ä : U.S. Stock (-hand Only) : World xpress (Shipping: 7-10 usiness Days) Ç : World xpress (-hand Only) Æ : World xpress (-hand Only) 29

NW IS! SWISS IQ O IO VN-S (oring) [orner-(r) olerance: +0 / -0.025mm] DS INSS ight-hand shown N & D VN (oring) -N ype (Without hipbreaker) op rades UNIN ermet oated arbide D ight-hand shown VN (ack oring) OOVIN U-O Insert Dimensions (VN-S) ight-hand shown INDX NI S S IIN SOID ND IS DIN art Number in.ore Dia. Dimensions (mm) Ø 1 2 3 S r VN 0103-005S 1.0 3.9 26.5 3.0 7 0.85 0.20 0105-005S 1.0 3.9 26.5 5.0 7 0.85 0.20 01503-005S 1.5 3.9 26.5 3.0 7 1.3 0.20 01505-005S 1.5 3.9 26.5 5.0 7 1.3 0.20 0206-005S 2.0 3.9 26.5 6.0-1.8 0.25 +0-0.02 025075-005S 2.5 3.9 28.1 7.5-2.1 0.40 0.05 0311-005S 3.0 3.9 30.8 11.0-2.6 0.40 03515-005S 3.5 3.9 34.8 15.0-2.9 0.50 0411-005S 4.0 3.9 30.8 11.0-3.5 0.50 0420-005S 4.0 3.9 39.8 20.0-3.5 0.50 VN 01503-01S 1.5 3.9 26.5 3.0 7 1.3 0.20 01505-01S 1.5 3.9 26.5 5.0 7 1.3 0.20 0206-01S 2.0 3.9 26.5 6.0-1.8 0.25 025075-01S 2.5 3.9 28.1 7.5-2.1 0.40 +0-0.03 0311-01S 3.0 3.9 30.8 11.0-2.6 0.40 0.10 03515-01S 3.5 3.9 34.8 15.0-3.0 0.50 0411-01S 4.0 3.9 30.8 11.0-3.5 0.50 0420-01S 4.0 3.9 39.8 20.0-3.5 0.50 VN 0411-02S 4.0 3.9 30.8 11.0-3.5 0.50 +0-0.04 0420-02S 4.0 3.9 39.8 20.0-3.5 0.50 0.20 ecommended utting onditions (VN-S) Workpiece aterial arbon / lloy (1045) Stainless (304) O 1225 100~400 100~325 VD oated arbide 930 100~325 100~250 arbide N D KW10 KN510 KD001 KD010 VN01-S VN015-S O 1225 VD oated arbide 930 arbide KW10 VN02-S ~ VN04-S Depth of ut: D.O..(in), eed: f(ipr) D.O.. f D.O.. f - - - - ~0.004 ~0.0004 ~0.008 ~0.0012 - - - - ~0.004 ~0.0004 ~0.008 ~0.0008 KD001 D KD010 emarks Wet : 1st ecommendation : 2nd ecommendation Swiss IQ ars are sold in 5 piece boxes. 30 (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

SWISS IQ O IO NW IS! Insert Dimensions (VN / VN-N / VN) in. ore Dia. art Number Workpiece aterial arbon / lloy (1045) Stainless (304) Non-ferrous etals (luminum / rass) O 1225 200~400 150~325 VD oated arbide 930 100~400 100~325 arbide N D KW10 100~325 100~250 - - - KN510 KD001 KD010 VN02 VN03 VN04 VN04 Depth of ut: D.O..(in), eed: f(ipr) VN05 VN06 VN07 VN05 D.O.. f D.O.. f D.O.. f D.O.. f - - - ~0.012 ~0.0012 ~0.016 ~0.0016 ~0.018 ~0.0028 ~0.020 ~0.0039 - - - ~0.012 ~0.0008 ~0.016 ~0.0012 ~0.018 ~0.0020 ~0.020 ~0.0028 ~325 Dimensions (mm) Ø 1 2 S r ~975 ~975 O VD oated arbide VN 0206-003 2 3.9 26.5 6 1.8 0.25 0.03 0311-003 3 3.9 30.8 11 2.6 0.40 0.03 Þ Þ 0411-003 4 3.9 30.8 11 3.5 0.50 0.03 Þ Þ 0420-003 4 3.9 39.8 20 3.5 0.50 0.03 Þ Þ 0511-003 5 3.9 30.8 11 4.5 0.70 0.03 Þ Þ 0520-003 5 3.9 39.8 20 4.5 0.70 0.03 Þ Þ 0620-003 6 3.9 39.8 20 5.3 1.00 0.03 Þ Þ 0630-003 6 3.9 49.8 30 5.3 1.00 0.03 0720-003 7 3.9 39.8 20 6.2 1.00 0.03 Þ Þ 0730-003 7 3.9 49.8 30 6.2 1.00 0.03 VN 0206-01 2 3.9 26.5 6 1.8 0.25 0.10 0311-01 3 3.9 30.8 11 2.6 0.40 0.10 0411-01 4 3.9 30.8 11 3.5 0.50 0.10 0420-01 4 3.9 39.8 20 3.5 0.50 0.10 0511-01 5 3.9 30.8 11 4.5 0.70 0.10 0520-01 5 3.9 39.8 20 4.5 0.70 0.10 0620-01 6 3.9 39.8 20 5.3 1.00 0.10 0630-01 6 3.9 49.8 30 5.3 1.00 0.10 0720-01 7 3.9 39.8 20 6.2 1.00 0.10 0730-01 7 3.9 49.8 30 6.2 1.00 0.10 VN 0206-02 2 3.9 26.5 6 1.8 0.25 0.20 0311-02 3 3.9 30.8 11 2.6 0.40 0.20 0411-02 4 3.9 30.8 11 3.5 0.50 0.20 0420-02 4 3.9 39.8 20 3.5 0.50 0.20 0511-02 5 3.9 30.8 11 4.5 0.70 0.20 Þ 0520-02 5 3.9 39.8 20 4.5 0.70 0.20 Þ 0620-02 6 3.9 39.8 20 5.3 1.00 0.20 0630-02 6 3.9 49.8 30 5.3 1.00 0.20 0720-02 7 3.9 39.8 20 6.2 1.00 0.20 0730-02 7 3.9 49.8 30 6.2 1.00 0.20 VN 0206-003N 2 3.9 26.5 6 1.8 0.25 0.03 0311-003N 3 3.9 30.8 11 2.6 0.40 0.03 0411-003N 4 3.9 30.8 11 3.5 0.50 0.03 0420-003N 4 3.9 39.8 20 3.5 0.50 0.03 0511-003N 5 3.9 30.8 11 4.5 0.70 0.03 0520-003N 5 3.9 39.8 20 4.5 0.70 0.03 0620-003N 6 3.9 39.8 20 5.3 1.00 0.03 0630-003N 6 3.9 49.8 30 5.3 1.00 0.03 0720-003N 7 3.9 39.8 20 6.2 1.00 0.03 0730-003N 7 3.9 49.8 30 6.2 1.00 0.03 VN 0206-02N 2 3.9 26.5 6 1.8 0.25 0.20 0311-02N 3 3.9 30.8 11 2.6 0.40 0.20 0411-02N 4 3.9 30.8 11 3.5 0.50 0.20 0420-02N 4 3.9 39.8 20 3.5 0.50 0.20 0511-02N 5 3.9 30.8 11 4.5 0.70 0.20 0520-02N 5 3.9 39.8 20 4.5 0.70 0.20 0620-02N 6 3.9 39.8 20 5.3 1.00 0.20 0630-02N 6 3.9 49.8 30 5.3 1.00 0.20 0720-02N 7 3.9 39.8 20 6.2 1.00 0.20 0730-02N 7 3.9 49.8 30 6.2 1.00 0.20 VN 0411-003 4 3.9 30.8 11 3.6 1.00 0.03 0420-003 4 3.9 39.8 20 3.6 1.00 0.03 0511-003 5 3.9 30.8 11 4.6 1.30 0.03 0520-003 5 3.9 39.8 20 4.6 1.30 0.03 VN 0411-01 4 3.9 30.8 11 3.6 1.00 0.10 0420-01 4 3.9 39.8 20 3.6 1.00 0.10 0511-01 5 3.9 30.8 11 4.6 1.30 0.10 0520-01 5 3.9 39.8 20 4.6 1.30 0.10 ecommended utting onditions (VN / VN-N / VN) 1225 ~0.012 ~0.0020 ~0.016 ~0.0024 ~0.018 ~0.0039 ~0.020 ~0.0059 Swiss IQ ars are sold in 5 piece boxes. 930 arbide KW10 KD001 D KD010 emarks Wet : 1st ecommendation : 2nd ecommendation D Inserts are sold in 1 piece boxes. DS INSS N & D UNIN OOVIN U-O DIN SOID ND IS IIN S S NI INDX Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com 31

SWISS IQ O IO SVN-N (Without Side Stopper) SVNS-N (Without Side Stopper / Without lamp Screw) DS NI S S IIN SOID ND IS DIN U-O OOVIN UNIN N & D INSS ight-hand shown oolholder Dimensions art Number Dimensions (mm) Stock 1=h 1 2 3 4 1 2 3 SVN 1010-12N 10 10 100 22 - - 10 - - ig.1 1212K-12N 12 12 125 22 - - 12 - - ig.1 1616K-12N 16 16 125 22 - - 16 - - ig.1 2020K-12N 20 20 125 22 - - 20 - - ig.1 2525-12N 25 25 150 22 - - 25 - - ig.1 ight-hand Insert for ight-hand oolholder Spare arts pplicable Inserts lamp Screw Wrench Setscrew W S-3080-10 S3 4 30~ 31 37 47 15 VN...-... VN...-... VN...-.. VN...-.. VN...-.. SVNS 1010K-12-06N 10 10 125 45 10 12 10 29 6 ig.2 S-3080 W-10S - (VN..06-...) 1010K-12-11N 10 10 125 45 10 12 10 33 11 ig.2 S-3080 W-10S - (VN..11-...) (VN..11-...) (VN...-11 ) (VN...-11 ) 1212-12-06N 12 12 150 45 10 12 12 29 6 ig.2 S-3080 W-10S - (VN..06-...) 1212-12-11N 12 12 150 45 10 12 12 33 11 ig.2 S-3080 W-10S - 1212-12-20N 12 12 150 45 10 13 12 42 20 ig.2 S-3080 W-10S - (VN..11-...) (VN..11-...) (VN...-11 ) (VN...-11 ) (VN..20-...) (VN..20-...) (VN...-20) 1616-12-06N 16 16 150 45 16 12 16 29 6 ig.2 S-3080 W-10S - (VN..06-...) 1616-12-11N 16 16 150 45 16 12 16 33 11 ig.2 S-3080 W-10S - 1616-12-20N 16 16 150 45 16 13 16 42 20 ig.2 S-3080 W-10S - very type of insert is attachable for SVNS-N, however in case of setting insert top at the toolholder face level, please use above applicable ( ) insert. In this case, 3 dimension of toolholder and 2 dimension of insert will correspond. 1) SVN-N / S...SVN-N / S-SVN-SN oolholders (without side stopper) retain high index accuracy by easy restraint. Note 1 & Note 2 : See Insert Dimension able. ( 30~ 31) (VN..11-...) (VN..11-...) (VN...-11 ) (VN...-11 ) (VN..20-...) (VN..20-...) (VN...-20) 2) or high-rigidity clamping, (e.g. when varying load direction of undercutting, internal and external, or face cutting by one tool), changing the S3x4 screw to a S3x4 screw (sold separately) enables the toolholder's rigid clamping equivalent to the side stopper holders. Spare arts (Optional) Screw (Side Stopper) Wrench S3 4 W-1.5 INDX 32 (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

SWISS IQ O IO S...SVN-N (Without Side Stopper : Standard) S...SVN-SN (Without Side Stopper : Straight) DS ight-hand shown oolholder Dimensions art Number S12-SVN12N Stock Unit Dimensions ØD1 ØD2 1 2 1 12 20.0 11 80 23 4 ig.1 S14-SVN12N mm 14 20.0 13 90 23 4 ig.1 S16-SVN12N 16 24.0 15 100 23 6 ig.1 S19-SVN12N Þ inch 0.750 0.945 0.669 3.937 0.945 0.236 ig.1 S19N-SVN12N Þ 0.750 0.945 0.669 6.299 0.945 0.236 ig.1 S20-SVN12N mm 20 24.0 18 100 24 6 ig.1 S25-SVN12N Þ 1.000 1.181 0.905 3.937 0.945 0.236 ig.1 S25Q-SVN12N Þ inch 1.000 1.181 0.905 7.086 0.945 0.236 ig.1 S19-SVN12SN Þ 0.750 0.728 0.669 3.937 0.905 0.157 ig.2 S20-SVN12SN 20 19.5 18 100 23 4 ig.2 S22K-SVN12SN mm 22 21.5 20 125 23 4 ig.2 S25.0-SVN12SN 25 24.5 23 90 23 4 ig.2 uidance of ach older ype Selection ang-ype (orizontal) ang-ype ight-hand Insert for ight-hand oolholder Spare arts pplicable Inserts lamp Screw Wrench Set Screw S-3080-10 S3 4 S-3080-10 S3 4 ang-ype (ront oading Sleeve ype) Note 1 & Note 2 : See Insert Dimension able. ( 30~ 31) 30~ 31 37 47 15 VN...-.. VN...-... VN...-.. VN...-.. VN...-.. ang-ype (ack oading Sleeve ype) INSS N & D UNIN OOVIN U-O DIN SOID ND IS Square Shank (Straight) Square Shank (-) Square Shank Square Shank IIN ound Shank (Standard) ound Shank (Standard) ound Shank (Standard) S S NI ound Shank (Straight) ound Shank (Straight) ound Shank (Straight) INDX ecommended toolholder may change according to machines used and actual position. utomatic lathes have various toolpost types other than those above. Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com 33

SWISS IQ O IO VNX-S (oring) [orner-(r) inus olerance] DS VNX0103 VNX0105 VNX01503 VNX01505 VNX03516 INSS ight-hand shown N & D UNIN Insert Dimensions (VNX-S) in.ore Dia. Dimensions (mm) art Number Ø 1 2 3 1 1 S r Insert rade VD oated arbide 930 INDX NI S S IIN SOID ND IS DIN U-O OOVIN VNX 0103-005S 1.0 3.9 26.5 3 7 0.85 2.95 0.20 0105-005S 1.0 3.9 26.5 5 7 0.85 2.95 0.20 01503-005S 1.5 3.9 26.5 3 7 1.30 2.95 0.20 01505-005S 1.5 3.9 26.5 5 7 1.30 2.95 0.20 0206-005S 2.0 3.9 26.5 6-1.80 3.00 0.25 +0-0.02 0311-005S 3.0 3.9 30.8 11-2.60 3.50 0.40 0.05 03511-005S 3.5 3.9 30.8 11-3.10 3.75 0.45 03516-005S 3.5 3.9 39.8 16 21 3.10 3.75 0.45 0411-005S 4.0 3.9 30.8 11-3.50 4.00 0.50 0420-005S 4.0 3.9 39.8 20-3.50 4.00 0.50 VNX 01503-01S 1.5 3.9 26.5 3 7 1.30 2.95 0.20 01505-01S 1.5 3.9 26.5 5 7 1.30 2.95 0.20 0206-01S 2.0 3.9 26.5 6-1.80 3.00 0.25 0311-01S 3.0 3.9 30.8 11-2.60 3.50 0.40 +0-0.03 03511-01S 3.5 3.9 30.8 11-3.10 3.75 0.45 0.1 03516-01S 3.5 3.9 39.8 16 21 3.10 3.75 0.45 0411-01S 4.0 3.9 30.8 11-3.50 4.00 0.50 0420-01S 4.0 3.9 39.8 20-3.50 4.00 0.50 VNX 0411-02S 4.0 3.9 30.8 11-3.50 4.00 0.50 +0-0.04 0420-02S 4.0 3.9 39.8 20-3.50 4.00 0.50 0.2 ecommended utting onditions (VN-S) Workpiece aterial arbon / lloy (1045) Stainless (304) 630 VNX-S ttachment holder for VNX-S Swiss IQ ar 1. VNX-S ttachment holder for VNX-S Swiss IQ ar is below (See page 35). SVNS-XN (Without Side Stopper) S SVN-XN (Without Side Stopper) S SVN-SXN (Without Side Stopper) VD oated arbide arbide N D 2. bove holder assures high index accuracy by easy restraint. 915 - - - - 930 100~325 100~250 3. holder which attaches setscrews (without side stopper) can be used as binding effect holder as with side stopper holder, once taking off the setscrew, and insert a screw (S3x4: sold separately) with wrench (W-1.5: sold separately). KW10 KN510 KD001 KD010 VNX01-S VNX015-S VNX02-S ~ VNX04-S Depth of ut: D.O..(in), eed: f(ipr) D.O.. f D.O.. f - - - - ~0.004 ~0.0004 ~0.008 ~0.0012 - - - - ~0.004 ~0.0004 ~0.008 ~0.0008 emarks Wet : 1st ecommendation : 2nd ecommendation Spare arts (Optional) Screw (Side Stopper) Wrench S3 4 W-1.5 Swiss IQ ars are sold in 5 piece boxes. 34 (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

SWISS IQ O IO SVNS-XN (Square Shank: -shape) DS INSS ight-hand shown Note 1 dimension is same size as applicable insert (VNX) 2 dimension oolholder Dimensions ight-hand Insert for ight-hand oolholder N & D Dimensions (mm) Spare arts art Number Stock 1=h 1 2 3 1 2 3 lamp Screw Wrench Setscrew pplicable Inserts 34 UNIN SVNS 1010K-12-06XN 10 10 125 45 10 10 29 6 (VNX02..) 1010K-12-11XN 10 10 125 45 10 10 33 11 (VNX..11..) 1212-12-06XN 12 12 150 45 10 12 29 6 (VNX02..) 1212-12-11XN 12 12 150 45 10 12 33 11 (VNX..11..) S-3080 W-10S S3 4 1212-12-20XN 12 12 150 45 10 12 42 20 (VNX0420..) 1616-12-06XN 16 16 150 45 16 16 29 6 (VNX02..) 1616-12-11XN 16 16 150 45 16 16 33 11 (VNX..11..) 1616-12-20XN 16 16 150 45 16 16 42 20 (VNX0420..) ll Swiss IQ ar Inserts are used with an SVNS-XN oolholder, however, when setting the cutting edge at the face level of the toolholder as shown in ig., use the insert shown in ( ). S...SVN-XN (ound Shank: Standard) S...SVN-SXN (ound Shank: Straight) OOVIN U-O DIN SOID ND IS ight-hand shown ight-hand Insert for ight-hand oolholder 1. Note 1 dimension is same size as applicable insert (VNX) 2 dimension + 1mm 2. Note 2 dimension is same size as applicable insert (VNX) 2 dimension oolholder Dimensions (older center axis core and insert center are coaxial type) IIN art Number Stock Unit Dimensions ØD1 ØD2 1 2 Spare arts lamp Screw Wrench Setscrew pplicable Inserts 34 S S S12 -SVN12XN mm 12 20.0 11 80 23 S14 -SVN12XN 14 20.0 13 90 23 S15 -SVN12XN Þ inch 0.625 0.945 0.590 3.937 0.905 S16 -SVN12XN mm 16 24.0 15 100 23 S19 -SVN12XN Þ inch 0.750 0.945 0.669 3.937 0.945 S-3080-10 S19N -SVN12XN Þ 0.750 0.945 0.669 6.299 0.945 S20 -SVN12XN mm 20 24.0 18 100 24 S3 4 VNX... S25 -SVN12XN Þ 1.000 1.181 0.905 3.937 0.945 S25Q -SVN12XN Þ inch 1.000 1.181 0.905 7.086 0.945 S19 -SVN12SXN Þ 0.750 0.728 0.669 3.397 0.905 S20 -SVN12SXN 20 19.5 18 100 23 S22K -SVN12SXN mm 22 21.5 20 125 23 S-3080-10 S25.0 -SVN12SXN 25 24.5 23 90 23 ll Swiss IQ ar Inserts are used with an SVNS-XN oolholder, however, when setting the cutting edge at the face level of the toolholder as shown in ig., use the insert shown in ( ). NI INDX Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com 35

WIN O IO DS INSS N & D W (icro oring: orizontal ype) [orner-(r) olerance: +0/-0.02mm, +0/-0.03mm] art Number in.ore Dia. Dimensions (mm) Ø S r Insert rade VD oated arbide arbide W 01003-005 1.0 0.85 0.20 01503-005 1.5 1.30 0.20 +0 02003-005 2.0 1.75 0.25-0.02 0.05 02503-005 2.5 2.10 0.30 03003-005 3.0 2.40 0.40 W 01503-010 1.5 1.30 0.20 02003-010 2.0 1.75 0.25 +0-0.03 02503-010 2.5 2.10 0.30 0.10 ight-hand shown 03003-010 3.0 2.30 0.40 1025 KW10 UNIN SW (Square Shank for orizontal ype Inserts) (or left-hand toolholder for grooving, please see 48) OOVIN U-O DIN oolholder Dimensions art Number ight-hand shown Stock ight-hand Insert for ight-hand oolholder, eft-hand Insert for eft-hand oolholder Dimensions (mm) 1=h 1 2 3 1 2 SW 1212-15 12 12 85 - - 12-3 ig.1 1212K-15 12 12 125 - - 12-3 ig.1 1616K-15 16 16 125 - - 16-3 ig.1 2020K-15 20 20 125-25 25-3 ig.2 2525-15 25 25 150-25 32-3 ig.2 lamp Screw Spare arts Wrench pplicable Inserts S-3080 W-10S W- SOID ND IS S...-SW (ound Shank for orizontal ype) (or left-hand toolholder for grooving, please see 48) IIN S S NI INDX oolholder Dimensions art Number ight-hand shown Stock ight-hand Insert for ight-hand oolholder, eft-hand Insert for eft-hand oolholder Dimensions (mm) ØD1 ØD2 1 2 3 S12- SW15 12.000 20.0 11 80 18 22 3 ig.1 S14- SW15 14.000 20.0 13 100 18 22 3 ig.1 S15- SW15 15.875 20.0 15 85 18 22 3 ig.1 S16- SW15 16.000 20.0 15 85 18 22 3 ig.1 S19- SW15 19.050 18.5 17 90 18-3 ig.2 S19K- SW15 19.050 18.5 17 120 18-3 ig.2 S20- SW15 20.000 19.5 18 90 18-3 ig.2 S20K- SW15 20.000 19.5 18 120 18-3 ig.2 S22K- SW15 22.000 21.5 20 125 22-3 ig.2 S25.0- SW15 25.000 24.5 23 110 22-3 ig.2 S25K- SW15 25.400 25.0 23 120 22-3 ig.2 lamp Screw Spare arts Wrench pplicable Inserts S-3080 W-10S W- win ars are sold in 5 piece boxes. 36 (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

WIN O IO [SOID Y] W (icro oring: Vertical ype) [orner-(r) olerance: +0/-0.02mm, +0/-0.03mm] art Number in.ore Dia. Dimensions (mm) Ø S r W 01003-005 1.0 0.85 0.20 Insert rade VD oated arbide arbide 01503-005 1.5 1.30 0.20 +0 02003-005 2.0 1.75 0.25-0.02 0.05 02503-005 2.5 2.10 0.30 03003-005 3.0 2.30 0.40 W 01503-010 1.5 1.30 0.20 02003-010 2.0 1.75 0.25 +0-0.03 02503-010 2.5 2.10 0.30 0.1 ight-hand shown 03003-010 3.0 2.30 0.40 SWS (Square Shank for Vertical ype: -shape) 1025 KW10 DS INSS N & D UNIN ight-hand shown oolholder Dimensions Dimensions (mm) art Number Stock 1=h 1 2 3 1 2 lamp Screw Spare arts Wrench pplicable Inserts bove & 49 OOVIN U-O SWS 1010X-15 10 10 120 16-10 9 3-1212X-15 12 12 120 16-12 7 3-1616X-15 16 16 120 20-16 3 3 - SWS 1010-15 10 10 85 16-10 9 3 - S-3080 W-10S W- W DIN 1212-15 12 12 85 16-12 7 3 - ecommended utting onditions (VN-S) Workpiece aterial arbon / lloy (1045) Stainless (304) ecommended rade (Vc sfm) VD oated arbide 1025 100~325 100~250 W01003 W01503 W01003 W01503 W02003 W02503 W03003 W02003 W02503 W03003 Depth of ut: D.O..(in), eed: f(ipr) D.O.. f D.O.. f ~0.004 ~0.0004 ~0.008 ~0.0012 ~0.004 ~0.0004 ~0.008 ~0.0008 emarks Wet : 1st ecommendation : 2nd ecommendation SOID ND IS IIN S S NI INDX win ars are sold in 5 piece boxes. Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com 37

DYNI S [ INS] [SW ] /S-S- xcellent ar (oring / Internal acing) (ax. Overhang ength /D=~5.5) DS Shank Dia. ØD Straight ole Dia. Ød INSS Ø8 Ø2.5 Ø10 Ø3.0 Ø12 Ø4.0 Ø16 Ø5.0 ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder N & D S-S- ar (oring / Internal acing) (ax. Overhang ength /D=~4) UNIN ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder OOVIN /-S- arbide Shank ar (oring / Internal acing) (ax. Overhang ength /D=~7) U-O Shank Dia. ØD Ø8 Straight ole Dia. Ød Ø3 Ø10 Ø3 DIN ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Ø12 Ø16 Ø4 Ø4 SOID ND IS IIN S S NI INDX 38 800.823.7284 Visit us online at Kyocerarecisionools.com

DYNI S [ INS] [SW ] oolholder Dimensions art Number Stock Unit in. ore Dia. Dimensions Ø ØD 1 2 3 4 Std. orner- oolant ole lamp Screw Spare arts Wrench DS xcellent ar 06-S 2 Þ Þ 0.480 0.375 0.336 6 0.787 0.937 0.803 0.236 12 1/64 Yes ig.2 S-2545-8 08-S 2 Þ Þ inch 0.600 0.500 0.461 6 0.945 1.217 0.969 0.276 10 1/64 Yes ig.2 10-S 3 Þ Þ 0.770 0.625 0.586 8 1.181 1.339 1.205 0.354 10 1/64 Yes ig.2 S-4065-15 S10-S 03-05 5 10 9.0 100 24-11 2.5 6 0.2 No ig.1 S-1635 S10-S 03-06 6 10 9.0 100 28-13 3.0 15 0.2 No ig.1-6 S10-S 04-07 7 10 9.0 100 32-15 3.5 13 0.2 No ig.1 S-2035 S10-S 04-08 8 10 9.0 100 37-15 4.0 13 0.2 No ig.1 mm 08X-S 06-10 10 8 7.0 120 16 20 17 5.0 11 0.4 Yes ig.2 INSS N & D 10-S 06-12 12 10 9.0 140 20 25 21 6.0 14 0.4 Yes ig.2 S-2545-8 12-S 06-14 14 12 11.0 150 24 30 25 7.0 12 0.4 Yes ig.2 16Q-S 09-18 18 16 15.0 180 30 34 31 9.0 10 0.4 Yes ig.2 S-4065-15 S08X-S 06-10 10 8 7.0 120 16 20 17 5.0 10 0.4 No ig.3 UNIN S10-S 06-12 12 10 9.0 140 20 25 21 6.0 14 0.4 No ig.3 S-2545-8 mm S12-S 06-14 14 12 11.0 150 24 30 25 7.0 12 0.4 No ig.3 S16Q-S 09-18 18 16 15.0 180 30 34 31 9.0 10 0.4 No ig.3 S-4065-15 06N-S 2 Þ Þ 0.480 0.375 0.336 6.3 0.787 0.764 0.764 0.236 12 1/64 Yes ig.6 06N-S 2-2/3 Þ Þ 0.480 0.375 0.336 4.2 0.787 0.764 0.764 0.236 12 1/64 Yes ig.6 arbide 08Q-S 2 Þ Þ 0.600 0.500 0.461 7.1 0.906 0.882 0.882 0.276 10 1/64 Yes ig.6 inch 08Q-S 2-2/3 Þ Þ 0.600 0.5 0.461 4.8 0.906 0.882 0.882 0.276 10 1/64 Yes ig.6 10X-S 3 Þ Þ 0.770 0.625 0.586 8.7 1.102 1.079 1.079 0.354 10 1/64 Yes ig.6 10X-S 3-2/3 Þ Þ 0.770 0.625 0.586 5.8 1.102 1.079 1.079 0.354 10 1/64 Yes ig.6 04-S 03-05 5 4 3.8 90 9-8 2.5 10 0.2 No ig.5 05-S 03-06 Þ 6 5 4.4 100 11-11 3.0 15 0.2 No ig.5 06-S 04-07 7 6 5.4 110 12-12 3.5 13 0.2 No ig.5 07K-S 04-08 8 7 6.4 125 13-13 4.0 13 0.2 No ig.5 S-2545 S-1635 S-2035-8 -6 OOVIN U-O 08-S 06-10 10 8 7.0 140 16 15 15 5.0 11 0.4 Yes ig.6 08-S 06-10-2/3 10 8 7.0 90 16 15 15 5.0 14 0.4 Yes ig.6 mm 10N-S 06-12 12 10 9.0 160 20 19 19 6.0 14 0.4 Yes ig.6 10N-S 06-12-2/3 Þ 12 10 9.0 105 20 19 19 6.0 12 0.4 Yes ig.6 12Q-S 06-14 14 12 11.0 180 23 22 22 7.0 12 0.4 Yes ig.6 S-2545-8 DIN 12Q-S 06-14-2/3 14 12 11.0 120 23 22 22 7.0 10 0.4 Yes ig.6 16X-S 09-18 18 16 15.0 220 28 27 27 9.0 10 0.4 Yes ig.6 16X-S 09-18-2/3 18 16 15.0 145 28 27 27 9.0 10 0.4 Yes ig.6 S-4065-15 SOID ND IS pplicable Inserts oolholder pplication inute D.O.. inishing inishing inishing- edium inishing- edium edium inishing- edium inishing inishing / recision ow eed ef. age 8 8 9 9 9 9, 10 8, 9 11 10 11, 12 K Q Standard Q - -S (/) -U...S 03-... 1109.. - - - - - - 1109.. 1109.. -...S 04-... 1411.. - - - - - - 1411.. 1411.. -...S 2......S 06-... - 215.. 215.. 215.. 215.. 215.. 215.. - - 215.....S 3......S 09-... - 325.. 325 325 325.. oolholder pplication ow eed / recision Stainless ast Iron Non-ferrous etals Non-ferrous etals 325.. 325.. Non-ferrous etals 325.. - - 325.. ard aterials ef. age 11 10 13 12 13 12 4 -US Q Without hipbreaker 3 D N...S 03-... - - - - - - W1109.....S 04-... - - - - - W1411.. W1411.....S 2... 215.....S 06-... 215.. - W215.. - - W215.. W215.....S 3... 325.....S 09-... 325.. 325.. W325.. 325.. 325.. W325.. W325.. ecommended utting onditions 71~ 72 IIN S S NI INDX Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com 39

DYNI [ INS] [SW ] -S- xcellent ar (oring / Internal acing) (ax. Overhang ength /D=~5.5) DS INSS Shank Dia. ØD Ø10 Ø12 Straight ole Dia. Ød Ø3 Ø4 ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Ø16 Ø5 N & D S-S- ar (oring / Internal acing) (ax. Overhang ength /D=~4) UNIN ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder OOVIN -S- arbide Shank ar (oring / Internal acing) (ax. Overhang ength /D=~7) U-O Shank Dia. ØD Straight ole Dia. Ød Ø10 Ø3 DIN ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Ø12 Ø16 Ø4 Ø4 SOID ND IS IIN S S NI INDX 40 800.823.7284 Visit us online at Kyocerarecisionools.com

DYNI [ INS] [SW ] oolholder Dimensions art Number Stock Unit in. ore Dia. Dimensions Ø ØD 1 2 3 4 Std. orner- oolant ole lamp Screw Spare arts Wrench DS xcellent ar 05K-S 2 Þ Þ 0.413 0.312 0.273 5 0.630 0.760 0.669 0.197 10.0 1/64 Yes ig.1 S-2545-8 06-S 2.5 Þ Þ 0.480 0.375 0.336 6 0.787 0.961 0.791 0.236 5.0 1/64 Yes ig.1 inch S-3060-10 08-S 2.5 Þ Þ 0.580 0.500 0.461 6 0.945 1.201 0.961 0.276 4.0 1/64 Yes ig.1 10-S 3 Þ Þ 0.700 0.625 0.586 8 1.181 1.461 1.189 0.354 3.5 1/64 Yes ig.1 S-4065-15 10-S 08-12 12 10 9 140 20 25 20 6 5.0 0.4 Yes ig.1 S-3060-10 12-S 08-14 14 12 11 150 24 29 24 7 4.0 0.4 Yes ig.1 mm 12-S 09-16 16 12 11 150 24 31 24 8 4.0 0.4 Yes ig.1 S-4065-15 16Q-S 09-18 18 16 15 180 30 37 30 9 3.5 0.4 Yes ig.1 S10-S 08-12 12 10 9 140 20 25 20 6 5.0 0.4 No ig.2 S-3060-10 S12-S 08-14 14 12 11 150 24 29 24 7 4.0 0.4 No ig.2 mm S12-S 09-16 16 12 11 150 24 31 24 8 4.0 0.4 No ig.2 S-4065-15 S16Q-S 09-18 18 16 15 180 30 37 30 9 3.5 0.4 No ig.2 10N-S 08-12 12 10 9 160 20 19 19 6 5.0 0.4 Yes ig.3 INSS N & D UNIN 10N-S 08-12-2/3 12 10 9 105 20 19 19 6 5.0 0.4 Yes ig.3 arbide 10N-S 08-12-1/2 12 10 9 80 20 19 19 6 5.0 0.4 Yes ig.3 12Q-S 08-14 14 12 11 180 23 22 22 7 4.0 0.4 Yes ig.3 12Q-S 08-14-2/3 mm 14 12 11 120 23 22 22 7 4.0 0.4 Yes ig.3 12Q-S 08-14-1/2 14 12 11 90 23 22 22 7 4.0 0.4 Yes ig.3 S-3060-10 16X-S 09-18 18 16 15 220 28 27 27 9 3.5 0.4 Yes ig.3 16X-S 09-18-2/3 18 16 15 145 28 27 27 9 3.5 0.4 Yes ig.3 16X-S 09-18-1/2 18 16 15 110 28 27 27 9 3.5 0.4 Yes ig.3 S-4065-15 OOVIN pplicable Inserts oolholder pplication inishing inishing inishing- edium edium inishing- edium ow arbon / inishing ow arbon / inishing-edium ast Iron Non-ferrous etals ard aterials ef. age 13 13 13 13 14 14 14 14 13 4 Q Standard -Y X XQ Without hipbreaker D N...S 2... - - - 215.. - - - - - -...S 2.5......S 08-... 2515.. 2515.. 2515.. 2515.. 2515.. 2515.. - 2515.. 2515.. 2515.....S 3......S 09-... 32.. 32.. 32.. 32.. 32.. 32.. 32.. 32.. 32.. 32.. ecommended utting onditions 71~ 72 U-O DIN SOID ND IS IIN S S NI INDX Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com 41

S [, INS] [SW ] S-S() ar (oring / Internal acing) (ax. Overhang ength /D=~3) DS INSS ig.1 N & D ight-hand shown -S ar (oring / Internal acing) eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder (ax. Overhang ength /D=~3) UNIN ig.2 OOVIN ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder -S() arbide Shank ar (oring / Internal acing) (ax. Overhang ength /D=~7) U-O DIN ig.3 SOID ND IS ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder IIN S S NI INDX 42 (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

S [, INS] [SW ] oolholder Dimensions art Number Stock Unit in. ore Dia. Dimensions Ø ØD 1 2 Std. orner- oolant ole lamp Screw Spare arts Wrench DS arbide ** Optional sleeve S2.5-10 (0.625" dia.) is available. (Sleeve screw: SS-2, sleeve wrench: W-2) pplicable Inserts [] oolholder S05K-S 2 Þ Þ pplication inishing inishing inishing- edium edium inishing- edium ow arbon / inishing ow arbon / inishing-edium ast Iron Non-ferrous etals ard aterials ef. age 13 13 13 13 14 14 14 14 13 4 0.394 0.312-5.00 0.625 0.197 12 0.004 No ig.1 S-2545-8 S06-S 2.5 Þ Þ 0.472 0.375-6.00 1.000 0.236 5 1/64 No ig.1 S-3-10 S08-S 3 Þ Þ 0.630 0.500-6.00 1.180 0.315 4 1/64 No ig.1 S10X-S 3 Þ Þ 0.788 0.625-7.00 1.380 0.394 3 1/64 No ig.1 S12-S 3 Þ Þ 0.984 0.750-8.00 1.560 0.492 0 1/64 No ig.1 inch S16-S 3 Þ Þ 1.338 1.000-12.00 1.750 0.669 0 1/64 No ig.1 05K-S -2 Þ 0.415 0.313-5.0 0.870 0.218 11 1/64 Yes ig.2 06-S -2 Þ 0.480 0.375-6.0 0.870 0.250 8 1/64 Yes ig.2 08-S -2 Þ 0.600 0.500-8.0 0.870 0.312 6 1/64 Yes ig.2 10S-S -2 Þ 0.770 0.625-10.0 0.870 0.406 4 1/64 Yes ig.2 025X-S 1.1 ** Þ S-4-15 S-2545-8 0.197 0.156 0.148 3.543 0.315 0.098 15 0.008 No ig.3 S-1635-6 05K-S 2 Þ 0.394 0.312 0.282 5.00 0.625 0.197 12 0.004 No ig.3 S-2545-8 06-S 2.5 Þ 0.472 0.375 0.334 6.00 1.000 0.236 5 1/64 No ig.3 S-3-10 inch 08-S 3 Þ 0.630 0.500 0.480 8.00 1.180 0.315 4 1/64 No ig.3 10S-S 3 Þ 0.788 0.625 0.584 10.00 1.380 0.394 3 1/64 No ig.3 12S-S 3 Þ 0.984 0.750 0.710 10.00 1.560 0.492 0 1/64 No ig.3 S-4 Q Standard -Y X XQ Without hipbreaker D N -15 INSS N & D UNIN OOVIN U-O...S 2 - - - 215.. - - - - - -...S 2.5 2515.. 2515.. 2515.. 2515.. 2515.. 2515.. - 2515.. 2515.. 2515.....S 3 32.. 32.. 32.. 32.. 32.. 32.. 32.. 32.. 32.. 32.. pplicable Inserts [] oolholder pplication inute D.O.. inishing inishing inishing- edium inishing- edium edium inishing- edium inishing inishing / recision ow eed ef. age 8 8 9 9 9 9, 10 8, 9 11 10 11, 12 K Q Standard Q - -S (/) -U...S 1.1 1109.. - - - - - - 1109.. 1109.. -...S 2...S -2-215.. 215.. 215.. 215.. 215.. 215.. - - 215.. oolholder pplication ow eed / recision Stainless ast Iron Non-ferrous etals Non-ferrous etals Non-ferrous etals ard aterials ef. age 11 10 13 12 13 12 4 -US Q Without hipbreaker 3 D N...S 1.1 - - - - - - W1109.. DIN SOID ND IS IIN S S NI...S 2...S -2 215.. - W215.. - - 215.. W215.. W215.. ecommended utting onditions 71~ 72 INDX Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com 43

DYNI [D INS] [SW ] -SDU- xcellent ar (opying) (ax. Overhang ength /D=~5.5) DS INSS Shank Dia. ØD Ø10 Ø12 Straight ole Dia. Ød Ø3 Ø4 ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Ø16 Ø5 N & D S-SDU- ar (opying) (ax. Overhang ength /D=~4) UNIN ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder OOVIN -SDU- arbide Shank ar (opying) (ax. Overhang ength /D=~7) U-O Shank Dia. ØD Straight ole Dia. Ød Ø10 Ø3 DIN ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Ø12 Ø16 Ø4 Ø4 SOID ND IS IIN S S NI INDX 44 800.823.7284 Visit us online at Kyocerarecisionools.com

DYNI [D INS] [SW ] oolholder Dimensions art Number Stock Unit in. ore Dia. Dimensions Ø ØD 1 2 4 S Std. orner- oolant ole lamp Screw Spare arts Wrench DS xcellent ar arbide 06-SDU 2 Þ Þ 0.551 0.375 0.336 6 0.748 0.756 0.341 0.130 5 1/64 Yes ig.1 08-SDU 2 Þ Þ inch 0.630 0.500 0.461 6 0.827 0.988 0.360 0.130 5 1/64 Yes ig.1 10-SDU 2 Þ Þ 0.787 0.625 0.586 8 0.827 1.031 0.459 0.130 5 1/64 Yes ig.1 16Q-SDU 07-14 S-2560 14 16 15 180 28 23 10.8 4.4 5 0.4 Yes ig.1 S-2560-8 10-SDU 07-14 14 10 9 140 19 20 8.7 3.3 5 0.4 Yes ig.2 12-SDU 07-16 mm 16 12 11 150 21 24 9.7 3.3 5 0.4 Yes ig.2 16Q-SDU 07-20 20 16 15 180 21 26 11.7 3.3 5 0.4 Yes ig.2 S-2560 16Q-SDU 11-23 23 16 15 180 21 31 14.5 6.1 5 0.4 Yes ig.2 S-4065-15 S16Q-SDU 07-14 14 16 15 180 28 23 10.8 4.4 5 0.4 No ig.3 S-2560-8 S20-SDU 11-20 20 20 19 200 48 30 15.6 6.1 5 0.4 No ig.3 S-4065-15 S10-SDU 07-14 14 10 9 140 19 20 8.7 3.3 5 0.4 No ig.4 mm S12-SDU 07-16 16 12 11 150 21 24 9.7 3.3 5 0.4 No ig.4 S16Q-SDU 07-20 20 16 15 180 21 26 11.7 3.3 5 0.4 No ig.4 S-2560 S16Q-SDU 11-23 23 16 15 180 21 31 14.5 6.1 5 0.4 No ig.4 S-4065-15 06N-SDU 2 Þ 0.551 0.375 0.336 6.3 0.776 0.697 0.341 0.130 5 1/64 Yes ig.5 06N-SDU 2-2/3 Þ 0.551 0.375 0.336 4.2 0.776 0.697 0.341 0.130 5 1/64 Yes ig.5 08Q-SDU 2 Þ 0.630 0.500 0.461 7.1 0.894 0.772 0.360 0.098 5 1/64 Yes ig.5 inch 08Q-SDU 2-2/3 Þ 0.630 0.500 0.461 4.8 0.894 0.772 0.360 0.098 5 1/64 Yes ig.5 10X-SDU 2 Þ 0.787 0.625 0.586 8.7 1.091 0.976 0.459 0.130 5 1/64 Yes ig.5 10X-SDU 2-2/3 Þ 0.787 0.625 0.586 5.8 1.091 0.976 0.459 0.130 5 1/64 Yes ig.5 10N-SDU 07-14 14 10 9 160 20 19 8.7 3.3 5 0.4 Yes ig.5 10N-SDU 07-14-2/3 14 10 9 105 20 19 8.7 3.3 5 0.4 Yes ig.5 12Q-SDU 07-16 16 12 11 180 23 22 9.7 3.3 5 0.4 Yes ig.5 12Q-SDU 07-16-2/3 16 12 11 120 23 22 9.7 3.3 5 0.4 Yes ig.5 mm 16X-SDU 07-20 20 16 15 220 28 26 11.7 3.3 5 0.4 Yes ig.5 16X-SDU 07-20-2/3 Þ 20 16 15 145 28 26 11.7 3.3 5 0.4 Yes ig.5 16X-SDU 11-23 23 16 15 220 28 27 14.5 6.1 5 0.4 Yes ig.5 16X-SDU 11-23-2/3 23 16 15 145 28 27 14.5 6.1 5 0.4 Yes ig.5 pplicable Inserts oolholder pplication inute D.O.. inishing inishing inishing- edium inishing- edium inishing- oughing inishing inishing / recision ow eed S-2560 S-2560 S-4065 ow eed / recision ef. age 15 15, 16 16 16 16 17 18 18 19, 20 19 20 K K Q Standard - -S (/) -U -US (/) - -8-8 -8-8 -8-15 ow eed INSS N & D UNIN OOVIN U-O DIN SOID ND IS...-SDU 2......-SDU 07-......-SDQ 2......-SDQ 07-... D215.. D215.. D215.. D215.. D215.. D215.. D215.. D215.. D215.. D215.. D215.. IIN...-SDZ 07-......-SDU 11-......-SDQ 11-......-SDZ 11-... D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. S S pplication ow eed / recision ow arbon / inishing ow arbon / inishing-edium Stainless ast Iron Non-ferrous etals Non-ferrous etals Non-ferrous etals ard aterials ef. age 20 17 17 17 21 21 21 13 5 -S X XQ Q Without hipbreaker -3 D N NI oolholder...-sdu 2......-SDU 07-... INDX...-SDQ 2......-SDQ 07-... - D215.. - D215.. DW215.. - - D215.. DW215.....-SDZ 07-......-SDU 11-......-SDQ 11-... D325.. D325.. D325.. D325.. DW325.. D325.. D325.. D325.. DW325.....-SDZ 11-... ecommended utting onditions 71~ 72 Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com 45

DYNI [D INS] [SW ] -SDQ- xcellent ar (opying) (ax. Overhang ength /D=~5.5) DS INSS Shank Dia. ØD Ø10 Ø12 Straight ole Dia. Ød Ø3 Ø4 ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Ø16 Ø5 N & D S-SDQ- ar (opying) (ax. Overhang ength /D=~4) UNIN ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder OOVIN -SDQ- arbide Shank ar (opying) (ax. Overhang ength /D=~7) U-O DIN SOID ND IS oolholder Dimensions art Number Stock ight-hand shown Unit in. ore Dia. Shank Dia. ØD eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Dimensions Ø ØD 1 2 4 S Std. orner- oolant ole lamp Screw Ø10 Ø12 Ø16 Spare arts Straight ole Dia. Ød Ø3 Ø4 Ø4 Wrench NI S S IIN xcellent ar arbide 06-SDQ 2 Þ Þ 0.512 0.375 0.336 6 0.736 0.783 0.295 0.083 10 1/64 Yes ig.1 08-SDQ 2 Þ Þ inch 0.630 0.500 0.461 6 0.866 1.051 0.364 0.102 8 1/64 Yes ig.1 10-SDQ 2 Þ Þ 0.787 0.625 0.586 8 0.984 1.256 0.443 0.102 6 1/64 Yes ig.1 10-SDQ 07-13 13 10 9 140 19 21 7.50 2.1 10 0.4 Yes ig.1 12-SDQ 07-16 mm 16 12 11 150 22 25 9.25 2.6 8 0.4 Yes ig.1 16Q-SDQ 07-20 20 16 15 180 25 32 11.30 2.6 6 0.4 Yes ig.1 S10-SDQ 07-13 13 10 9 140 19 21 7.50 2.1 10 0.4 No ig.2 S12-SDQ 07-16 mm 16 12 11 150 22 25 9.25 2.6 8 0.4 No ig.2 S16Q-SDQ 07-20 20 16 15 180 25 32 11.30 2.6 6 0.4 No ig.2 10N-SDQ 07-13 13 10 9 160 20 19 7.50 2.1 10 0.4 Yes ig.3 10N-SDQ 07-13-2/3 13 10 9 105 20 19 7.50 2.1 10 0.4 Yes ig.3 12Q-SDQ 07-16 16 12 11 180 23 22 9.25 2.6 8 0.4 Yes ig.3 mm 12Q-SDQ 07-16-2/3 16 12 11 120 23 22 9.25 2.6 8 0.4 Yes ig.3 S-2560 S-2560 S-2560 S-2560-8 -8-8 -8 INDX 16X-SDQ 07-20 20 16 15 220 28 27 11.30 2.6 6 0.4 Yes ig.3 16X-SDQ 07-20-2/3 20 16 15 145 28 27 11.30 2.6 6 0.4 Yes ig.3 ecommended utting onditions 71~ 72 pplicable Inserts 45 46 (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

DYNI [D INS] [SW ] -SDZ- xcellent ar (ack oring) (ax. Overhang ength /D=~5.5) DS Shank Dia. ØD Ø10 Ø12 Straight ole Dia. Ød Ø3 Ø4 INSS ight-hand shown ight-hand Insert for ight-hand oolholder, eft-hand Insert for eft-hand oolholder Ø16 Ø5 S-SDZ- ar (ack oring) (ax. Overhang ength /D=~4) N & D UNIN ight-hand shown ight-hand Insert for ight-hand oolholder, eft-hand Insert for eft-hand oolholder -SDZ- arbide Shank ar (ack oring) (ax. Overhang ength /D=~7) OOVIN Shank Dia. ØD Straight ole Dia. Ød U-O Ø10 Ø3 oolholder Dimensions ight-hand shown ight-hand Insert for ight-hand oolholder, eft-hand Insert for eft-hand oolholder Ø12 Ø16 Ø4 Ø4 DIN art Number Stock in. ore Dia. Dimensions (mm) Ø ØD 1 2 4 5 S Std. orner- oolant ole lamp Screw Spare arts Wrench SOID ND IS xcellent ar 16Q-SDZ 07-14 14 16 15 180 30.0 17 10.0 10.8 4.4 5 0.4 Yes ig.1 S-2545-8 10-SDZ 07-14 14 10 9 140 14.0 16 9.5 8.7 3.3 5 0.4 Yes ig.2 S-2545 12-SDZ 07-16 16 12 11 150 14.0 20 10.5 9.7 3.3 5 0.4 Yes ig.2-8 S-2560 16Q-SDZ 07-20 20 16 15 180 14.0 22 10.5 11.7 3.3 5 0.4 Yes ig.2 16Q-SDZ 11-23 23 16 15 180 15.0 22 15.0 14.5 6.1 5 0.4 Yes ig.2 S-4065-15 S16Q-SDZ 07-14 14 16 15 180 30.0 17 10.0 10.8 4.4 5 0.4 No ig.3 S-2545-8 S10-SDZ 07-14 14 10 9 140 14.0 16 9.5 8.7 3.3 5 0.4 No ig.4 S-2545 IIN S S arbide S12-SDZ 07-16 16 12 11 150 14.0 20 10.5 9.7 3.3 5 0.4 No ig.4-8 S-2560 S16Q-SDZ 07-20 20 16 15 180 14.0 22 10.5 11.7 3.3 5 0.4 No ig.4 S16Q-SDZ 11-23 23 16 15 180 15.0 22 15.0 14.5 6.1 5 0.4 No ig.4 S-4065-15 10N-SDZ 07-14 14 10 9 160 10.5 16 9.5 8.7 3.3 5 0.4 Yes ig.5 S-2545 12Q-SDZ 07-16 Þ 16 12 11 180 12.5 20 10.5 9.7 3.3 5 0.4 Yes ig.5-8 S-2560 16X-SDZ 07-20 20 16 15 220 17.5 22 10.5 11.7 3.3 5 0.4 Yes ig.5 NI 16X-SDZ 11-23 23 16 15 220 17.0 22 15.0 14.5 6.1 5 0.4 Yes ig.5 S-4065-15 ecommended utting onditions 71~ 72 pplicable Inserts 45 INDX Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com 47

S [D INS] [SW ] S-SDU ar (opying) (ax. Overhang ength /D=~3) DS INSS N & D UNIN oolholder Dimensions art Number ight-hand shown Stock Unit in. ore Dia. eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Dimensions Ø ØD 1 2 S Std. orner- oolant ole lamp Screw Spare arts Wrench S08-SDU 2 Þ Þ 0.564 0.500 0.480 6.00 1.125 0.346 0.145 5 S10X-SDU 2 Þ Þ 0.564 0.625 0.584 7.00 1.125 0.346 0.145 5 inch S12-SDU 3 Þ Þ 0.750 0.750 0.710 8.00 1.500 0.476 0.224 5 S16X-SDU 3 Þ Þ 0.980 1.000 0.970 9.00 2.360 0.693 0.240 5 1/64 S-2560-8 No 1/32 S-4085-15 OOVIN U-O pplicable Inserts oolholder pplication inute D.O.. inishing inishing inishing- edium inishing- edium inishing- oughing inishing inishing / recision ow eed ow eed / recision ef. age 15 15, 16 16 16 16 17 18 18 19, 20 19 20 K K Q Standard - -S (/) -U -US (/) - ow eed...-sdu 2 D215.. D215.. D215.. D215.. D215.. D215.. D215.. D215.. D215.. D215.. D215.....-SDU 3 D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. DIN SOID ND IS oolholder pplication ow eed / recision ow arbon / inishing ow arbon / inishing-edium Stainless ast Iron Non-ferrous etals Non-ferrous etals Non-ferrous etals ard aterials ef. age 20 17 17 17 21 21 21 13 5 -S X XQ Q Without hipbreaker -3 D N...-SDU 2 - D215.. - D215.. DW215.. - - D215.. DW215.....-SDU 3 D325.. D325.. D325.. D325.. DW325.. D325.. D325.. D325.. DW325.. IIN ecommended utting onditions 71~ 72 S S NI INDX 48 (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

S [D INS] [SW ] S-SDZ ar (ack oring) (ax. Overhang ength /D=~3) DS INSS oolholder Dimensions art Number ight-hand shown Stock Unit in. ore Dia. eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Dimensions Ø ØD 1 2 S Std. orner- oolant ole lamp Screw Spare arts Wrench N & D UNIN S10Q-SDZ 2 Þ Þ 0.550 0.625 0.596 7.00 1.18 0.491 0.410 0.173 5 1/64 S10X-SDZ 2 Þ Þ 0.630 0.625 0.596 7.00 1.52 0.491 0.449 0.173 5 1/64 inch S12-SDZ 3 Þ 0.787 0.750 0.710 8.00 1.60 0.590 0.595 0.240 5 1/32 S16X-SDZ 3 Þ Þ 0.984 1.000 0.960 9.00 2.09 0.590 0.693 0.240 5 1/32 No S-2560 S-4085-8 -15 pplicable Inserts oolholder pplication inute D.O.. inishing inishing inishing- edium inishing- edium inishing- oughing inishing inishing / recision ow eed ow eed / recision ef. age 15 15, 16 16 16 16 17 18 18 19, 20 19 20 K K Q Standard - -S (/) -U -US (/) - ow eed...-sdz 2 D215.. D215.. D215.. D215.. D215.. D215.. D215.. D215.. D215.. D215.. D215.. OOVIN U-O...-SDZ 3 D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. D325.. oolholder pplication ow eed / recision ow arbon / inishing ow arbon / inishing-edium Stainless ast Iron Non-ferrous etals Non-ferrous etals Non-ferrous etals ard aterials ef. age 20 17 17 17 21 21 21 13 5 -S X XQ Q Without hipbreaker -3 D N...-SDZ 2 - D215.. - D215.. DW215.. - - D215.. DW215.....-SDZ 3 D325.. D325.. D325.. D325.. DW325.. D325.. D325.. D325.. DW325.. DIN SOID ND IS ecommended utting onditions 71~ 72 IIN S S NI INDX Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com 49

[ INS] [SW ] -S arbide Shank ar (oring / Internal acing) (ax. Overhang ength /D=~7) DS INSS N & D ight-hand shown -SZ arbide Shank ar (ack oring) eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder (ax. Overhang ength /D=~7) UNIN OOVIN U-O oolholder Dimensions art Number Stock ight-hand shown in. ore Dia. Dimensions (mm) Ø ØD 1 2 3 S ight-hand Insert for ight-hand oolholder, eft-hand Insert for eft-hand oolholder When using -hand oolholder, Use -hand insert for machining in this direction () Use -hand insert for machining in this direction () Std. orner- lamp Screw Spare arts Wrench DIN 04X-S 03-055 5.5 4 3.8 91 7-2.95 0.65 15 0.03 04X-SZ 03-065 6.5 4 3.8 93 4 4.8 4.00 1.80 15 0.03 S-1635-6 pplicable Inserts SOID ND IS pplication inishing inishing / recision ef. age 22 22 - -S oolholder IIN...-S 03-... 1109.. 1109.....-SZ 03-... 1109.. 1109.. S S NI INDX ecommended utting onditions 71~ 72 eatures of -S 1. Well balanced design minimizing bore diameter yet maintaining a smaller insert radius. 2. igh flexibility of tool pass during pecking. 3. ood surface finish at internal facing. eatures of -SZ 1. ack boring bars for workpieces which require high concentric circle accuracy and are unavailable for chuck change. 2. vailable for back boring and pecking. 3. arge clearance between cutting edge and holder (1.8mm). 50 (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

DYNI [ INS] [SW ] -S- xcellent ar (oring / Internal acing) (ax. Overhang ength /D=~5.5) DS INSS ight-hand shown S-S- ar (oring / Internal acing) eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder (ax. Overhang ength /D=~4) N & D UNIN oolholder Dimensions ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder OOVIN art Number Stock in. ore Dia. Dimensions (mm) Ø ØD 1 2 3 4 S Std. orner- oolant ole lamp Screw Spare arts Wrench U-O xcellent ar 08X-S 09-10 10 8 7 120 16 22 16 5.0 0.5 14 0.4 Yes ig.1 10-S 09-12 12 10 9 140 20 26 20 6.2 0.9 12 0.4 Yes ig.1 10-S 11-12 12 10 9 140 20 26 20 6.2 0.9 12 0.4 Yes ig.1 12-S 11-14 14 12 11 150 24 30 25 7.2 0.7 10 0.4 Yes ig.1 16Q-S 11-18 18 16 15 180 30 39 31 9.2 0.7 8 0.4 Yes ig.1 S08X-S 09-10 10 8 7 120 16 22 16 5.0 0.5 14 0.4 No ig.2 S10-S 09-12 12 10 9 140 20 26 20 6.2 0.9 12 0.4 No ig.2 S10-S 11-12 12 10 9 140 20 26 20 6.2 0.9 12 0.4 No ig.2 S12-S 11-14 14 12 11 150 24 30 25 7.2 0.7 10 0.4 No ig.2 S-2250 S-2560 S-2250 S-2560-7 -8-7 -8 DIN SOID ND IS S16Q-S 11-18 18 16 15 180 30 39 31 9.2 0.7 8 0.4 No ig.2 pplicable Insert IIN pplication inishing-edium oolholder ef. age Q 23 S S...-S 09-......-S 11-... 1815.. 215.. ecommended utting onditions 71~ 72 NI INDX Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com 51

NW IS! DYNI [, INS] [SW ] /S-S()- xcellent ar (oring / Internal acing) (ax. Overhang ength /D=~5.5) DS Shank Dia. ØD Straight ole Dia. Ød INSS Ø8 Ø2.5 Ø10 Ø3.0 Ø12 Ø4.0 Ø16 Ø5.0 ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder N & D S-S()- ar (oring / Internal acing) (ax. Overhang ength /D=~4) UNIN ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder OOVIN ()-S()- arbide Shank ar (oring / Internal acing) (ax. Overhang ength /D=~7) U-O Shank Dia. ØD Ø8 Straight ole Dia. Ød Ø3 Ø10 Ø3 DIN ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Ø12 Ø16 Ø4 Ø4 SOID ND IS IIN S S NI INDX 52 800.823.7284 Visit us online at Kyocerarecisionools.com

DYNI [, INS] [SW ] NW IS! oolholder Dimensions art Number Stock Unit in. ore Dia. Dimensions Ø ØD 1 2 3 4 S Std. orner- oolant ole lamp Screw Spare arts Wrench DS xcellent ar arbide S04-S 1.2 Þ Þ 0.312 0.250 0.211 4 0.472-0.469 0.150 0.025 12.0 0.008 No ig.1 05K-S 1.2 Þ Þ 0.392 0.312 0.273 5 0.630 0.839 0.650 0.201 0.031 12.0 0.008 Yes ig.2 S-2035-6 05K-S 1.8 Þ Þ 0.392 0.312 0.273 5 0.630 0.850 0.646 0.197 0.022 10.0 1/64 Yes ig.2 06-S 1.8 Þ Þ inch 0.480 0.375 0.336 6 0.787 0.949 0.807 0.244 0.036 8.0 1/64 Yes ig.2 S-2545-8 06-S 2 Þ Þ 0.480 0.375 0.336 6 0.787 0.961 0.807 0.236 0.030 10.0 1/64 Yes ig.2 08-S 2 Þ Þ 0.580 0.500 0.461 6 0.945 1.228 0.953 0.283 0.032 7.0 1/64 Yes ig.2 S-3060-10 10-S 2 Þ Þ 0.700 0.625 0.586 8 1.181 1.402 1.193 0.362 0.036 3.5 1/64 Yes ig.2 S06-S 06-08 8 6 5.0 100 12-12 3.8 0.5 12.0 0.2 No ig.1 S-2035-6 08X-S 08-10 10 8 7.0 120 16 22 16 5.0 0.5 10.0 0.4 Yes ig.2 S-1-6 08X-S 09-10 10 8 7.0 120 16 22 16 5.0 0.5 10.0 0.4 Yes ig.2 S-2545-8 10-S 09-12 12 10 9.0 140 20 25 20 6.2 0.9 8.0 0.4 Yes ig.2 mm 10-S 11-12 12 10 9.0 140 20 26 20 6.0 0.7 10.0 0.4 Yes ig.2 S-3060-10 12-S 11-14 14 12 11.0 150 24 30 24 7.2 0.8 7.0 0.4 Yes ig.2 12-S 09-16 16 12 11.0 150 24 30 24 8.0 0.6 5.0 0.4 Yes ig.2 S-2545-8 16Q-S 11-18 18 16 15.0 180 30 36 30 9.2 0.7 3.5 0.4 Yes ig.2 S-3060-10 S06-S 06-08 8 6 5.0 100 12-12 3.8 0.5 12.0 0.2 No ig.3 S-2035-6 S08X-S 08-10 10 8 7.0 120 16 22 16 5.0 0.5 10.0 0.4 No ig.4 S-1-6 S08X-S 09-10 10 8 7.0 120 16 22 16 5.0 0.5 10.0 0.4 No ig.4 S-2545-8 S10-S 09-12 12 10 9.0 140 20 25 20 6.2 0.9 8.0 0.4 No ig.4 mm S10-S 11-12 12 10 9.0 140 20 26 20 6.0 0.7 10.0 0.4 No ig.4 S-3060-10 S12-S 11-14 14 12 11.0 150 24 30 24 7.2 0.8 7.0 0.4 No ig.4 S12-S 09-16 16 12 11.0 150 24 30 24 8.0 0.6 5.0 0.4 No ig.4 S-2545-8 S16Q-S 11-18 18 16 15.0 180 30 36 30 9.2 0.7 3.5 0.4 No ig.4 S-3060-10 06-S 06-08 8 6 5.4 110 12-12 3.8 0.5 12.0 0.2 No ig.5 S-2035-6 08-S 08-10 10 8 7.0 140 16 15 15 5.0 0.5 10.0 0.4 Yes ig.6 S-1-6 08-S 09-10 10 8 7.0 140 16 15 15 5.0 0.5 10.0 0.4 Yes ig.6 10N-S 09-12 12 10 9.0 160 20 19 19 6.2 0.9 8.0 0.4 Yes ig.6 10N-S 09-12-2/3 12 10 9.0 105 20 19 19 6.2 0.9 8.0 0.4 Yes ig.6 S-2545-8 10N-S 09-12-1/2 12 10 9.0 80 20 19 19 6.2 0.9 8.0 0.4 Yes ig.6 10N-S 11-12 12 10 9.0 160 20 19 19 6.0 0.7 10.0 0.4 Yes ig.6 10N-S 11-12-2/3 12 10 9.0 105 20 19 19 6.0 0.7 10.0 0.4 Yes ig.6 10N-S 11-12-1/2 mm 12 10 9.0 80 20 19 19 6.0 0.7 10.0 0.4 Yes ig.6 12Q-S 11-14 14 12 11.0 180 23 22 22 7.2 0.8 7.0 0.4 Yes ig.6 S-3060-10 12Q-S 11-14-2/3 14 12 11.0 120 23 22 22 7.2 0.8 7.0 0.4 Yes ig.6 12Q-S 11-14-1/2 14 12 11.0 90 23 22 22 7.2 0.8 7.0 0.4 Yes ig.6 12Q-S 11-14-1/2 14 12 11.0 90 23 22 22 7.2 0.8 7.0 0.4 Yes ig.6 12Q-S 09-16 16 12 11.0 180 23 22 22 8.0 0.6 5.0 0.4 Yes ig.6 S-2545-8 16X-S 11-18 18 16 15.0 220 28 27 27 9.2 0.7 3.5 0.4 Yes ig.6 16X-S 11-18-2/3 18 16 15.0 145 28 27 27 9.2 0.7 3.5 0.4 Yes ig.6 S-3060-10 16X-S 11-18-1/2 18 16 15.0 110 28 27 27 9.2 0.7 3.5 0.4 Yes ig.6 pplicable Inserts oolholder pplication inute D.O.. inishing inishing inishing inishing- edium inishing inishing / recision edium ow eed / recision ow arbon / inishing ef. age 23, 25 25 25 23 25 23, 26, 27 27 27 27 25 D Q -S - -US X...-S 1.2......-S 06-... 121.. - - 121.. - 121.. - - - -...-S 08-... 1515.. - - - - 1515.. 1515.. - 1515.. -...-S 1.8......-S 09-... 1815.. 1815.. 1815.. - 1815.. 1815.. - - - 1815.....-S 2......-S 11-... - 22.. 22.. - 22.. 22.. 22.. 22.. 22.. 22.. pplication ow arbon / inishing-edium ast Iron Non-ferrous etals ard aterials ef. age 26 23, 27 14~ 16 6 oolholder XQ Without hipbreaker D N INSS N & D UNIN OOVIN U-O DIN SOID ND IS IIN S S NI INDX...-S 1.2... 121.....-S 06-... - W121.. W121.. 1515.....-S 08-... - 1515.. 1515.....-S 1.8... 1815.....-S 09-... - 1815.. 1815.....-S 2... 22.....-S 11-... 22.. 22.. 22.. Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) - 1515.. 1815.. 22.. (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com ecommended utting onditions 71~ 72 53

S [, INS] S-SU() ar (oring) [SW ] (ax. Overhang ength /D=~3) DS INSS U-O OOVIN UNIN N & D oolholder Dimensions art Number S04-SU 1.2 S-SW ar (opying) ight-hand shown Stock Unit in. ore Dia. eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Dimensions Ø ØD 1 2 S Þ 0.312 0.250 0.224 4.00 0.50 0.148 0.023 12 1/64 S06-SU 1.8 Þ Þ 0.472 0.375 0.356 6.00 1.01 0.236 0.015 13 1/64 inch S08-SU 1.8 Þ Þ 0.630 0.500 0.480 6.00 1.18 0.315 0.090 10 1/64 Std. orner- oolant ole No lamp Screw S-1S Spare arts S05K-SU 1.5 Þ 0.392 0.313 0.270 5.00 0.75 0.196 0.020 13 1/64 S-1-6 S10X-SU 2 Þ Þ 0.787 0.625 0.584 7.00 1.38 0.394 0.100 7 1/64 S12-SU 2 Þ Þ 0.912 0.750 0.710 8.00 1.58 0.456 0.115 5 1/64 S-2 S-3 Wrench -6-8 -10 pplicable Inserts 55 (ax. Overhang ength /D=~3) DIN SOID ND IS IIN oolholder Dimensions art Number ight-hand shown Stock Unit in. ore Dia. eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Dimensions Ø ØD 1 2 3 S Std. orner- oolant ole lamp Screw Spare arts Wrench S S S06-SW 2 Þ 0.476 0.375 0.350 6.00 0.91 0.205 0.238 0.056 0 1/64 S08-SW 2 Þ 0.630 0.500 0.476 6.00 1.20 0.205 0.315 0.700 0 1/64 S10X-SW 2 Þ inch 0.786 0.625 0.600 7.00 1.40 0.205 0.393 0.860 0 1/64 S12-SW 2 Þ 0.970 0.750 0.726 8.00 1.60 0.205 0.485 0.115 0 1/64 No S-3S -10 S16-SW 2 Þ 1.240 1.000 0.974 8.00 2.00 0.205 0.620 0.125 0 1/64 NI pplicable Inserts 55 INDX 54 800.823.7284 Visit us online at Kyocerarecisionools.com

S [, INS] S-U ar (opying) [SW / O ] (ax. Overhang ength /D=~3) DS INSS oolholder Dimensions art Number Stock ight-hand shown Unit in. ore Dia. Dimensions Ø ØD 1 2 S eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Std. orner- oolant ole lamp ssembly Wrench Spare arts Shim Shim Screw N & D UNIN S10X-U 2 Þ inch 0.625 0.625 0.584 7.00 1.25 0.313 0.03 0 1/64 S-2S -15 - No S12X-U 2 Þ 1.060 0.750 0.710 7.00 1.50 0.520 0.05 0 1/64 S-2 - W-2.5 - - pplicable Inserts oolholder pplication inute D.O.. inishing inishing inishing inishing- edium inishing inishing / recision edium ow eed / recision ow arbon / inishing ef. age 23, 25 25 25 23 25 23, 26, 27 27 27 27 25 D Q -S - -US X...-SU 1.2 121.. - - 121.. - 121.. - - - -...-SU 1.5 1515.. - - - - 1515.. 1515.. - 1515.. -...-SU 1.8 1815.. 1815.. 1815.. - 1815.. 1815.. - - - 1815.....-SU 2...-SW 2...-U 2 pplication - 22.. 22.. - 22.. 22.. 22.. 22.. 22.. 22.. ow arbon / inishing-edium ast Iron Non-ferrous etals ard aterials ef. age 26 23, 27 14~ 16 6 oolholder XQ Without hipbreaker D N...-SU 1.2 - W121.....-SU 1.5-1515.....-SU 1.8-1815.....-SU 2...-SW 2...-U 2 22.. 22.. 121.. W121.. 1515.. 1515.. 1815.. 1815.. 22.. 22.. - 1515.. 1815.. 22.. ecommended utting onditions 71~ 72 OOVIN U-O DIN SOID ND IS IIN S S NI INDX 800.823.7284 Visit us online at Kyocerarecisionools.com 55

S [, INS] [SW ] -SX() arbide Shank ar (oring / Internal acing) (ax. Overhang ength /D=~7) DS INSS N & D ight-hand shown -SZ arbide Shank ar (ack oring) eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder (ax. Overhang ength /D=~7) UNIN OOVIN ight-hand shown oolholder Dimensions ight-hand Insert for ight-hand oolholder, eft-hand Insert for eft-hand oolholder When using -hand oolholder, Use -hand insert for machining in this direction () Use -hand insert for machining in this direction () U-O art Number revious art Number Stock in. ore Dia. Dimensions (mm) Ø ØD 1 2 3 S Std. orner- lamp Screw Spare arts Wrench DIN SOID ND IS 06-SX 06-075 SX 07506-06W 7.5 6 5.4 110 11 0.5 3.75 0.5 10 0.03 S-1S 08X-SX 08-09 SX 09008-08W 9.0 8 7.0 143 14 0.6 4.60 0.5 10 0.03 S-1-6 10X-SX 09-11 SX 11010-09W 11.0 10 9.0 164 17 0.6 5.60 0.5 10 0.03 S-2-8 06-SZ 06-085 SZ 08506-06W 8.5 6 5.4 110 5 5.7 5.10 2.0 10 0.03 S-1S -6 pplicable Inserts 57 IIN S S NI INDX 56 (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

S [, INS] [SW ] pplicable Inserts oolholder pplication inute D.O.. inishing inishing inishing inishing- edium inishing inishing / recision ow eed / recision ow arbon / inishing ef. age 23, 25 25 25 23 25 23, 26, 27 27 27 25 23, 27 ast Iron D Q -S -US X Without hipbreaker DS...-SX 1.2......-SX 06-... 121.. - - 121.. - 121.. - - - W121.....-SX 08-... 1515.. - - - - 1515.. 1515.. 1515.. - 1515.....-SX 1.8......-SX 09-... 1815.. 1815.. 1815.. - 1815.. 1815.. - - 1815.. 1815.....-SZ 1.2......-SZ 06-... 121.. - - 121.. - 121.. - - - 22.. pplication Non-ferrous etals ard aterials ef. age 14~ 16 6 oolholder D N INSS N & D UNIN...-SX 1.2......-SX 06-... 121.. -...-SX 08-......-SX 1.8......-SX 09-... 1515.. 1515.. 1515.. 1815.. 1815.. 1815.....-SZ 1.2......-SZ 06-... 121.. - ecommended utting onditions...sx() oring ar ecommended utting onditions 71~ 72 (Work aterial : 4140) OOVIN oolholder Description Insert Description (rade) Insert rade (Vc:sfm) Depth of ut: D.O..(in), eed: f(ipr) D.O.. f oolant U-O 06-SX 06-075 0601003 (930) 100~330 0.001~0.004 0.001~0.002 Yes 08X-SX 08-09 080201 (930) 100~330 0.002~0.006 0.001~0.003 Yes 10X-SX 09-11 090201 (930) 100~330 0.002~0.006 0.001~0.003 Yes DIN SOID ND IS IIN S S NI INDX 800.823.7284 Visit us online at Kyocerarecisionools.com 57

DYNI [V, V INS] [SW ] -SV()- xcellent ar (Internal Spherical achining / Internal acing) (ax. Overhang ength /D=~5.5) DS INSS Shank Dia. ØD Straight ole Dia. Ød Ø12 Ø4 N & D lease see 59 for cutting instructions ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Ø16 Ø4 S-SV()- ar (Internal Spherical achining / Internal acing) (ax. Overhang ength /D=~4) UNIN OOVIN lease see 59 for cutting instructions ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder oolholder Dimensions U-O DIN SOID ND IS xcellent ar art Number Stock in. ore Dia. Dimensions (mm) Ø ØD 1 2 3 4 12-SV 08-16 16 12 11 150 26 33 21 2 5 0.2 Yes ig.1 12-SV 08-16 16 12 11 150 26 33 20 2 5 0.4 Yes ig.1 16Q-SV 08-20 20 16 15 180 36 43 22 2 5 0.4 Yes ig.1 S12-SV 08-16 16 12 11 150 26 33 21 2 5 0.2 No ig.2 S12-SV 08-16 16 12 11 150 26 33 20 2 5 0.4 No ig.2 S16Q-SV 08-20 20 16 15 180 36 43 22 2 5 0.4 No ig.2 Std. orner- oolant ole Spare arts lamp Screw Wrench S-2050-6 S-2050-6 IIN S S NI pplicable Inserts oolholder pplication inishing inishing inishing inishing-edium inishing / recision ow eed / recision Non-ferrous etals ard aterials ef. age 31 30 30 30 32 32 16 7 K V Q -S -US D N...-SV 08-... V1515 - - - V1515.. V1515.. - -...-SV 08-... - V1515.. V1515.. V1515.. - - V1515.. VW1515.. ecommended utting onditions 71~ 72 INDX 58 (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

DYNI [V, V INS] [SW ]...SV()-, S...SV()- xcellent ar (Internal Spherical achining / Internal acing) efer to age 58 (Dynamic bar) 1. pplication ange DS INSS N & D 2. achining ethod In ases with No xisting ole inishing UNIN OOVIN f=0.002ipr f should be under 0.002ipr at internal facing In ases with Drilled ole U-O DIN SOID ND IS 3. aution f=0.002ipr f should be under 0.002ipr at internal facing IIN S S NI INDX 800.823.7284 Visit us online at Kyocerarecisionools.com 59

DYNI [V, V INS] [SW ] -SV()- xcellent ar (opying / Undercutting) (ax. Overhang ength /D=~5.5) DS INSS Shank Dia. ØD Ø10 Ø12 Straight ole Dia. Ød Ø3 Ø4 ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Ø16 Ø5 N & D S-SV- ar (opying / Undercutting) (ax. Overhang ength /D=~4) UNIN ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder OOVIN -SV()- arbide Shank ar (opying / Undercutting) (ax. Overhang ength /D=~7) U-O Shank Dia. ØD Straight ole Dia. Ød Ø10 Ø3 DIN ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Ø12 Ø16 Ø4 Ø4 SOID ND IS IIN S S NI INDX 60 800.823.7284 Visit us online at Kyocerarecisionools.com

DYNI [V, V INS] [SW ] oolholder Dimensions art Number Stock Unit in. ore Dia. Dimensions Ø ØD 1 2 4 S Std. orner- oolant ole lamp Screw Spare arts Wrench DS xcellent ar 06-SV 1.5 Þ Þ 0.630 0.375 0.336 6 0.945 0.843 0.335 0.118 8 1/64 Yes ig.1 08-SV 2 Þ Þ inch 0.790 0.500 0.461 6 1.142 1.000 0.433 0.177 8 1/64 Yes ig.1 S-2570-8 10-SV 2 Þ Þ 0.980 0.625 0.586 8 1.378 1.283 0.531 0.197 5 1/64 Yes ig.1 10-SV 08-14 14 10 9 140 24 21.0 8.5 3.0 8 0.4 Yes ig.1 S-2050-6 12-SV 11-18 mm 18 12 11 150 29 26.0 11.0 4.5 8 0.4 Yes ig.1 S-2570-8 16Q-SV 11-22 22 16 15 180 35 33.0 13.5 5.0 5 0.4 Yes ig.1 INSS N & D S10-SV 08-14 14 10 9 140 24 21.0 8.5 3.0 8 0.4 No ig.2 S-2050-6 arbide pplicable Inserts oolholder S12-SV 11-18 mm 18 12 11 150 29 26.0 11.0 4.5 8 0.4 No ig.2 S16Q-SV 11-22 22 16 15 180 35 33.0 13.5 5.0 5 0.4 No ig.2 10N-SV 08-14 pplication inishing inishing inishing inishing-edium inishing inishing / recision inishing-edium Non-ferrous etals ard aterials ef. age 28, 30 28, 30 28 28, 30 29 28 29 16 7 S-2570 14 10 9 160 20 18.5 8.5 3.0 8 0.4 Yes ig.3 S-2050-6 12Q-SV 11-18 mm 18 12 11 180 23 22.0 11.0 4.5 8 0.4 Yes ig.3 16X-SV 11-22 22 16 15 220 28 27.0 13.5 5.0 5 0.4 Yes ig.3 S-2570 V Q - -S -Y D N -8-8 UNIN OOVIN...-SV 1.5......-SV 08-... V1515.. V1515.. - V1515.. - - - V1515.. VW1515.....-SV 2......-SV 11-... V22.. V22.. V22.. V22.. V_22.. V22.. V22.. V22.. VW22.. ecommended utting onditions 71~ 72 U-O DIN SOID ND IS IIN S S NI INDX Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com 61

DYNI [V, V INS] [SW ] -SVU()- xcellent ar (opying) (ax. Overhang ength /D=~5.5) DS INSS Shank Dia. ØD Outer ole Dia. Ød Ø12 Ø4 N & D ight-hand shown S-SVU()- ar (opying) eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Ø16 Ø5 (ax. Overhang ength /D=~4) UNIN OOVIN ight-hand shown -SVU()- arbide Shank ar (opying) eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder (ax. Overhang ength /D=~7) U-O DIN Shank Dia. ØD Straight ole Dia. Ød Ø12 Ø4 SOID ND IS ight-hand shown -SVZ()- xcellent ar (ack oring) eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Ø16 Ø4 (ax. Overhang ength /D=~5.5) IIN S S Shank Dia. ØD Ø12 Outer ole Dia. Ød Ø4 NI ight-hand shown -SVZ()- ar (ack oring) ight-hand Insert for ight-hand oolholder, eft-hand Insert for eft-hand oolholder Ø16 Ø5 (ax. Overhang ength /D=~4) INDX ight-hand shown ight-hand Insert for ight-hand oolholder, eft-hand Insert for eft-hand oolholder 62 800.823.7284 Visit us online at Kyocerarecisionools.com

DYNI / [V, V INS] [SW ] oolholder Dimensions art Number Stock Unit in. ore Dia. Dimensions Ø ØD 1 2 4 5 S Std. orner- oolant ole lamp Screw Spare arts Wrench DS xcellent ar Þ Þ inch 10-SVU 2 Þ Þ 0.790 0.625 0.586 8 1.280 1.063-0.630 0.315 8 1/64 Yes ig.1 S-2570-8 12-SVU 08-16 16 12 11 150 25.5 23-11.5 5.5 8 0.4 Yes ig.1 S-2050-6 mm 16Q-SVU 11-20 20 16 15 180 32.5 27-16.0 8.0 8 0.4 Yes ig.1 S-2570-8 08-SVZ 1.5 Þ Þ 0.630 0.500 0.461 6 1.299 0.579-0.453 0.217 8 1/64 Yes ig.1 S-2050-6 inch 10-SVZ 2 Þ 0.790 0.625 0.586 8 1.673 0.799-0.630 0.315 8 1/64 Yes ig.1 S-2570-8 INSS N & D ar arbide xcellent ar S12-SVU 08-16 16 12 11 150 25.5 23-11.5 5.5 8 0.4 No ig.2 S-2050-6 S16Q-SVU 11-20 20 16 15 180 32.5 27-16.0 8.0 8 0.4 No ig.2 S-2570-8 12Q-SVU 08-18 18 12 11 180 23.0 22-11.5 5.5 8 0.4 Yes ig.3 S-2050-6 16X-SVU 11-25 25 16 15 220 28.0 27-16.0 8.0 8 0.4 Yes ig.3 S-2570-8 mm 12-SVZ 08-16 16 12 11 150 25.5 14 7.5 11.5 5.5 8 0.4 Yes ig.4 S-2050-6 16Q-SVZ 11-20 20 16 15 180 32.5 20 10.0 16.0 8.0 8 0.4 Yes ig.4 S-2570-8 S12-SVZ 08-16 16 12 11 150 25.5 14 7.5 11.5 5.5 8 0.4 No ig.5 S-2050-6 S16Q-SVZ 11-20 20 16 15 180 32.5 20 10.0 16.0 8.0 8 0.4 No ig.5 S-2570-8 UNIN S-SV ar (Internal Spherical achining / Internal acing) (ax. Overhang ength /D=~3) OOVIN U-O DIN oolholder Dimensions pplicable Inserts oolholder art Number pplication inishing inishing inishing inishing-edium inishing inishing / recision inishing-edium Non-ferrous etals ard aterials ef. age 28, 30 28, 30 28 28, 30 29 28 29 16 7 ight-hand shown Stock Unit in. ore Dia. eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Dimensions Ø ØD 1 2 3 S S08-SV 2 Þ Þ inch 0.620 0.500 0.480 6.00 1.25-0.310-8 S10X-SV 2 Þ Þ 0.780 0.625 0.584 7.00 1.44-0.390-8 V Q - -S -Y D N Std. orner- oolant ole lamp Screw Spare arts Wrench 1/64 No S-2570-8 SOID ND IS IIN S S NI...-SVU 1.5......-SVU 08-... V1515.. V1515.. - V1515.. - - - V1515.. VW1515.....-SVU 2......-SVU 11-... V22.. V22.. V22.. V22.. V_22.. V22.. V22.. V22.. VW22.....-SVZ 1.5......-SVZ 08-... V1515.. V1515.. - V1515.. - - - V1515.. VW1515.....-SVZ 2......-SVZ 11-... V22.. V22.. V22.. V22.. V_22.. V22.. V22.. V22.. VW22.....-SV 2 V22.. V22.. V22.. V22.. V_22.. V22.. V22.. V22.. VW22.. ecommended utting onditions 71~ 72 INDX Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com 63

DYNI [W, W INS] [SW ] S/-SWU()- xcellent ar (oring) (ax. Overhang ength /D=~5.5) DS INSS Shank Dia. ØD Outer ole Dia. Ød Ø8 Ø2.5 N & D ight-hand shown Ø10 Ø3.0 Ø12 Ø4.0 Ø16 Ø5.0 eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder UNIN S/-SWU()- ar (oring) (ax. Overhang ength /D=~4) OOVIN U-O ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder ()-SWU()- arbide Shank ar (oring) (ax. Overhang ength /D=~7) DIN SOID ND IS Shank Dia. ØD Outer ole Dia. Ød Ø5 - Ø6 - Ø7 - IIN Ø8 Ø10 Ø12 Ø3 Ø3 Ø4 S S ight-hand shown eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Ø16 Ø4 NI INDX 64 800.823.7284 Visit us online at Kyocerarecisionools.com

DYNI [W, W INS] [SW ] oolholder Dimensions art Number Stock Unit in. ore Dia. Dimensions Ø ØD 1 2 3 4 Std. orner- oolant ole lamp Screw Spare arts Wrench DS xcellent ar arbide S06-SWU 1.2 Þ Þ pplicable Inserts oolholder pplication inute D.O.. inishing inishing inishing-edium inishing inishing-edium ast Iron Non-ferrous etals ard aterials ef. age 33 34 33 34 33 34 34 16, 17 8 0.240 0.375 0.336 4 0.827-0.504 0.118 15.0 0.01 No ig.1 S06-SWU 1.5 Þ Þ 0.312 0.375 0.336 4 1.102-0.583 0.157 15.0 0.01 No ig.1 S-2035 06-SWU 1.5 Þ Þ inch 0.472 0.375 0.336 6 0.787 0.945 0.795 0.236 10.0 0.01 Yes ig.2 S-2050 08-SWU 2 Þ Þ 0.630 0.500 0.461 6 0.945 1.220 0.957 0.276 4.0 1/64 Yes ig.2 S-2545-8 10-SWU 3 Þ Þ 0.770 0.625 0.586 8 1.181 1.433 1.193 0.354 3.5 1/32 Yes ig.2 S-4065-15 S10-SWU 06-06 6 10 9.0 100 21-13 3.0 15.0 0.2 No ig.1 S10-SWU 06-07 7 10 9.0 100 25-15 3.5 13.0 0.2 No ig.1 S10-SWU 08-08 8 10 9.0 100 28-15 4.0 15.0 0.2 No ig.1 08X-SWU 08-10 10 8 7.0 120 16 21 16 5.0 13.0 0.2 Yes ig.2 mm 10-SWU 08-12 12 10 9.0 140 20 25 20 6.0 10.0 0.2 Yes ig.2 12-SWU 11-14 14 12 11.0 150 24 30 24 7.0 4.0 0.4 Yes ig.2 16Q-SWU 11-18 18 16 15.0 180 30 37 30 9.0 1.0 0.4 Yes ig.2 S-2035 S-2050 S-2545 16Q-SWU 16-18 18 16 15.0 180 30 37 30 9.0 3.5 0.8 Yes ig.2 S-4065-15 S10-SWU 06-06 6 10 9.0 100 21-13 3.0 15.0 0.2 No ig.3 S10-SWU 06-07 7 10 9.0 100 25-15 3.5 13.0 0.2 No ig.3 S10-SWU 08-08 8 10 9.0 100 28-15 4.0 15.0 0.2 No ig.3 S08X-SWU 08-10 10 8 7.0 120 16 21 16 5.0 13.0 0.2 No ig.4 mm S10-SWU 08-12 12 10 9.0 140 20 25 20 6.0 10.0 0.2 No ig.4 S12-SWU 11-14 14 12 11.0 150 24 30 24 7.0 4.0 0.4 No ig.4 S16Q-SWU 11-18 18 16 15.0 180 30 37 30 9.0 1.0 0.4 No ig.4 S-2035 S-2050 S-2545 S16Q-SWU 16-18 18 16 15.0 180 30 37 30 9.0 3.5 0.8 No ig.4 S-4065-15 05-SWU 06-06 6 5 4.4 100 11-11 3.0 13.0 0.2 No ig.5 06-SWU 06-07 7 6 5.4 110 12-12 3.5 13.0 0.2 No ig.5 07K-SWU 08-08 8 7 6.4 125 13-13 4.0 13.0 0.2 No ig.5 08-SWU 08-10 10 8 7.0 140 16 15 15 5.0 13.0 0.2 Yes ig.6 10N-SWU 08-12 12 10 9.0 160 20 19 19 6.0 10.0 0.2 Yes ig.6 10N-SWU 08-12-2/3 12 10 9.0 105 20 19 19 6.0 10.0 0.2 Yes ig.6 10N-SWU 08-12-1/2 12 10 9.0 80 20 19 19 6.0 10.0 0.2 Yes ig.6 12Q-SWU 11-14 14 12 11.0 180 23 22 22 7.0 4.0 0.4 Yes ig.6 mm 12Q-SWU 11-14-2/3 14 12 11.0 120 23 22 22 7.0 4.0 0.4 Yes ig.6 12Q-SWU 11-14-1/2 14 12 11.0 90 23 22 22 7.0 4.0 0.4 Yes ig.6 16X-SWU 11-18 18 16 15.0 220 28 27 27 9.0 1.0 0.4 Yes ig.6 16X-SWU 11-18-2/3 18 16 15.0 145 28 27 27 9.0 1.0 0.4 Yes ig.6 16X-SWU 11-18-1/2 18 16 15.0 110 28 27 27 9.0 1.0 0.4 Yes ig.6 16X-SWU 16-18 18 16 15.0 220 28 27 27 9.0 3.5 0.8 Yes ig.6 16X-SWU 16-18-2/3 18 16 15.0 145 28 27 27 9.0 3.5 0.8 Yes ig.6 16X-SWU 16-18-1/2 18 16 15.0 110 28 27 27 9.0 3.5 0.8 Yes ig.6 S-2035 S-2050 S-2545 S-4065 -D Q - -Y Without hipbreaker D N...-SWU 1.2......-SWU 06-... W121.. - W121.. - W_121.. - WW121.. W121.. WW121.....-SWU 1.5......-SWU 08-... - - W1515.. - W_1515.. - WW1515.. W1515.. WW1515.....-SWU 2......-SWU 11-... - W215.. - W215.. - W215.. WW215.. W215.. -...-SWU 3......-SWU 16-... - W32.. - W32.. - W32.. WW32.. - - -6-6 -8-6 -8-6 -8-15 ecommended utting onditions 71~ 72 INSS N & D UNIN OOVIN U-O DIN SOID ND IS IIN S S NI INDX Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com 65

[W, W INS] [SW ] -SWU arbide Shank ar (oring) (ax. Overhang ength /D=~7) DS INSS N & D UNIN oolholder Dimensions art Number ight-hand shown Stock Unit in. ore Dia. eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Dimensions Ø ØD 1 2 S Std. orner- oolant ole lamp Screw Spare arts Wrench arbide 0325K-SWU 1.2 Þ Þ 0.240 0.203 0.180 5.00 0.50 0.118 15 1/64 1/64 S-2040-6 inch No 045K-SWU 1.5 Þ Þ 0.312 0.281 0.252 5.00 0.55 0.157 15 1/64 1/64 S-2050-6 OOVIN U-O DIN pplicable Inserts oolholder pplication inute D.O.. inishing inishing ast Iron Non-ferrous etals ard aterials ef. age 33 33 33 34 16, 17 8 -D - Without hipbreaker D N...-SWU 1.2 W121.. W121.. W_121.. WW121.. W121.. WW121.....-SWU 1.5 - W1515.. W_1515.. WW1515.. W1515.. WW1515.. ecommended utting onditions 71~ 72 SOID ND IS IIN S S NI INDX 66 (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com U.S. Stock Standard : Þ World xpress (Shipping: 7-10 usiness Days) :

[W, W INS] [SW ] S-SWU ar (oring / Internal acing) (ax. Overhang ength /D=~3) DS INSS oolholder Dimensions art Number ight-hand shown Stock Unit in. ore Dia. eft-hand Insert for ight-hand oolholder, ight-hand Insert for eft-hand oolholder Dimensions Ø ØD 1 2 Std. orner- oolant ole lamp Screw Spare arts Wrench N & D UNIN S06-SWU 1.2 Þ Þ 0.240 0.375 0.356 4.00 0.825 0.115 15 0.004 S-2040-6 inch No S06X-SWU 1.5 Þ Þ 0.312 0.375 0.356 4.33 1.102 0.156 15 1/64 S-2050-6 pplicable Inserts oolholder pplication inute D.O.. inishing inishing ast Iron Non-ferrous etals ard aterials ef. age 33 33 33 34 16, 17 8 -D - Without hipbreaker D N...-SWU 1.2 W121.. W121.. W_121.. WW121.. W121.. WW121.....-SWU 1.5 - W1515.. W_1515.. WW1515.. W1515.. WW1515.. ecommended utting onditions 71~ 72 OOVIN U-O DIN SOID ND IS IIN S S NI INDX Þ : U.S. Stock Standard : World xpress (Shipping: 7-10 usiness Days) (ustomer Service) 800.823.7284 - Option 1 (echnical Support) 800.823.7284 - Option 2 Visit us online at Kyocerarecisionools.com 67